Yamaha DVD-S659 Manual de usuario

Marca: Yamaha

Modelo: DVD-S659

Categoría: Reproductores de DVD

Tipo: Manual de usuario

HDMI

DVD PLAYER

LECTEUR DE DVD

DVD-S659

00EN_DVD-S659_U.book Page 0 Monday, May 22, 2006 12:29 PM

IMPORTANT SAFETY INSTRUCTIONS

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to alert

you to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert you to the presence

of important operating and maintenance

(servicing) instructions in the literature

accompanying the appliance.

Read Instructions — All the safety and operating

instructions should be read before the product is operated.

Retain Instructions — The safety and operating instructions

should be retained for future reference.

Heed Warnings — All warnings on the product and in the

operating instructions should be adhered to.

Follow Instructions — All operating and use instructions

should be followed.

Cleaning — Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

Attachments — Do not use attachments not recommended

by the product manufacturer as they may cause hazards.

Water and Moisture — Do not use this product near water

— for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool;

and the like.

Accessories — Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may fall,

causing serious injury to a child or adult, and serious

damage to the product. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or sold

with the product.

Any mounting of the product should follow the

manufacturer’s instructions, and should use a mounting

accessory recommended by the manufacturer.

A product and cart combination should be

moved with care. Quick stops, excessive

force, and uneven surfaces may cause the

product and cart combination to overturn.

Ventilation — Slots and openings in the

cabinet are provided for ventilation and to ensure reliable

operation of the product and to protect it from overheating, and

these openings must not be blocked or covered. The openings

should never be blocked by placing the product on a bed, sofa,

rug, or other similar surface.

This product should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is provided or

the manufacturer’s instructions have been adhered to.

Power Sources — This product should be operated only

from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to your

home, consult your product dealer or local power company.

For products intended to operate from battery power, or

other sources, refer to the operating instructions.

Grounding or Polarization — This product may be equipped

with a polarized alternating current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact

your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

Power-Cord Protection — Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

Lightning — For added protection for this product during a

lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power-line surges.

Power Lines — An outside antenna system should not be

located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

Overloading — Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can result

in a risk of fire or electric shock.

Object and Liquid Entry — Never push objects of any kind

into this product through openings as they may touch

dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind on

the product.

Servicing — Do not attempt to service this product yourself

as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

Damage Requiring Service — Unplug this product from the

wall outlet and refer servicing to qualified service personnel

under the following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the

product,

c) If the product has been exposed to rain or water,

If the product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified

technician to restore the product to its normal operation,

e) If the product has been dropped or damaged in any

way, and

f) When the product exhibits a distinct change in

performance - this indicates a need for service.

Replacement Parts — When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer or have the same characteristics

as the original part. Unauthorized substitutions may result in

fire, electric shock, or other hazards.

Safety Check — Upon completion of any service or repairs

to this product, ask the service technician to perform safety

checks to determine that the product is in proper operating

condition.

Wall or Ceiling Mounting — The unit should be mounted to

a wall or ceiling only as recommended by the manufacturer.

Heat — The product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

00EN_DVD-S659_U.book Page i Monday, June 12, 2006 4:19 PM

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association

’

s Consumer Electronics Group want you to get the most out of your

equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or

distortion - and, most importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries

Association

’

s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

FCC INFORMATION (for US customers)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications

not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void

your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class

“B” digital devices.

Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential

environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio

frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference

harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference

will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning

the product “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change

the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this

type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe

Ave. Buena Park, CA90622.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

AVOID DIRECT EXPOSURE TO THE BEAM

INVISIBLE LASER RADIATION WHEN OPEN

DANGER:

DO NOT STARE INTO BEAM

INVISIBLE LASER RADIATION WHEN OPEN

CAUTION:

LASER SAFETY

This unit employs a laser. Due to possible eye

injury, only a qualified service person should

remove the cover or attempt to service this device.

DANGER

This unit emits visible laser radiation when open.

Avoid direct eye exposure to beam.

When this unit is plugged into a wall outlet, do not

place your eyes close to the opening of the disc

tray and other openings or look inside.

PELIGRO

Esta unidad emite radiación láser visible cuando se

abre. Evite la exposición directa a los rayos láser.

Cuando esta unidad esté enchufada a una toma

de corriente, no ponga sus ojos cerca de la

abertura de la bandeja del disco ni otras aberturas

para mirar al interior.

SEGURIDAD CONTRA LA RADIACIÓN

LÁSER

Esta unidad utiliza rayos láser. Debido a la

posibilidad de que se produzcan daños en los ojos,

la extracción de la cubierta de la unidad o las

DANGER

Risque d’exposition au laser en cas d’ouverture.

Eviter toute exposition au faisceau.

Lorsque cet appareil est branché à la prise de

courant, ne pas approcher les yeux de l’ouverture

du plateau changeur et des autres ouvertures

pour regarder à l’intérieur.

SECURITE LASER

L’appareil utilise un laser. En raison des risques de

blessure des yeux, le retrait du couvercle ou les

réparations de l’appareil devront être confiés

exclusivement à un technicien d’entretien qualifié.

00EN_DVD-S659_U.book Page ii Monday, June 12, 2006 4:19 PM

iii

CAUTION: READ THIS BEFORE OPERATING THIS UNIT.

To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

Install this unit in a well ventilated, cool, dry, clean

place — away from direct sunlight, heat sources,

vibration, dust, moisture, or cold. In a cabinet,

allow about 2.5cm (1 inch) of free space all

around this unit for adequate ventilation.

Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds.

Do not expose this unit to sudden temperature

changes from cold to hot, nor locate this unit in

an environment with high humidity (i.e., a room

with a humidifier) to prevent condensation inside

this unit, which may cause an electrical shock, fire,

damage to this unit, and/or personal injury.

Avoid installing this unit where foreign objects

may fall onto this unit and/or this unit may be

exposed to liquid dripping or splashing. On the

top of this unit, do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

–

Burning objects (i.e., candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall,

spilling the liquid and causing an electrical

shock to the user and/or damage to this unit.

Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation.

If the temperature inside this unit rises, it may cause

fire, damage to this unit, and/or personal injury.

Do not plug in this unit to a wall outlet until all

connections are complete.

Do not operate this unit upside-down. It may

overheat, possibly causing damage.

Do not use excessive force on switches, knobs

and/or cords.

When disconnecting the power cord from the

wall outlet, grasp the plug; do not pull the cord.

Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

Use only the voltage specified on this unit. Using

this unit with a higher voltage than specified is

dangerous and may cause fire, damage to this unit,

and/or personal injury. YAMAHA will not be held

responsible for any damage resulting from use of

this unit with a voltage other than as specified.

Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reason.

When not planning to use this unit for long

periods of time (i.e., vacation), disconnect the AC

power plug from the wall outlet.

Be sure to read the “Troubleshooting” section on

common operating errors before concluding that

this unit is faulty.

Before moving this unit, press STANDBY/ON to

set the unit in standby mode, and then disconnect

the AC power plug from the wall outlet.

Install this unit near the AC wall outlet and where

the AC power plug can be reached easily.

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet,

even if this unit itself is tuned off. This is called the

standby mode. In this state, this unit is designed to

consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug

to wide slot and fully insert.

This Class B digital apparatus complies with

Canadian ICES-003.

For Customer Use:

Read carefully the information located at the rear

panel of this unit and enter below the Serial No.

Retain this information for future reference.

Model No.

Serial No. __________________________

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

LASER

Type Semiconductor laser GaAlAs

Wave length 650 nm (DVD)

780 nm (VCD/CD)

Output Power 7 mW (DVD)

10 mW (VCD/CD)

Beam divergence 60 degree

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

00EN_DVD-S659_U.book Page iii Monday, June 12, 2006 4:19 PM

English

Contents

Introduction

Region codes...............................................................3

Supplied accessories..................................................3

Notes about discs/content format.........................3

Cleaning discs..............................................................4

Patent information.....................................................4

Functional Overview

Front panel ..................................................................5

Rear panel....................................................................5

Remote control..........................................................6

Connections

General notes on connections................................7

Audio connections.....................................................7

Digital connection ................................................................7

Analog connection...............................................................7

Video connections .....................................................8

Component video jacks <A>.......................................8

S-video jack <B>..................................................................8

Composite video jack <C> ...........................................8

HDMI connections.....................................................9

HDMI jack.................................................................................9

Getting Started

Step 1: Inserting batteries into the remote control ...10

Using the remote control.............................................10

Step 2: Turning on the power.............................. 11

Step 3: Setting a TV type and display.................. 11

Setting a color system for your TV.........................11

Setting an aspect ratio for your TV.........................12

Step 4: Setting a language preference................. 12

Setting the OSD Language...........................................12

Setting the audio, subtitle and disc menu

languages (DVD-Video only)......................................13

Disc Operation

Basic playback...........................................................14

General operation...................................................14

Pausing playback.................................................................14

Selecting track/chapter ...................................................14

Searching backward/forward.......................................14

Stopping playback..............................................................14

Selecting the various repeat/shuffle functions....15

Repeat and shuffle.............................................................15

Repeating a section within a chapter/track.........15

Operations for video playback (DVD/VCD/SVCD) ...15

Using the disc menu.........................................................15

Slow motion.........................................................................15

Zooming in............................................................................16

Resuming playback from the last stopped point....16

On-screen display (OSD).............................................16

Special DVD features ............................................. 17

Playing by title......................................................................17

Camera angle.......................................................................17

Audio........................................................................................18

Subtitles...................................................................................18

Special VCD/SVCD features.................................18

Playback control (PBC)..................................................18

Preview function ................................................................18

Playing data discs (MP3/WMA/JPEG/DivX).......... 19

General operation.............................................................19

Selecting a folder and track/file..................................20

Repeat and shuffle.............................................................20

Special picture disc features..................................20

Preview function ................................................................20

Zooming pictures..............................................................20

Playback with multi-angles............................................21

Scan effect..............................................................................21

Playing MP3 music and JPEG picture

simultaneously .....................................................................21

Special DivX features .............................................21

Interactive menu ................................................................21

Multiple audio and subtitle languages ....................21

00EN_DVD-S659_U.book Page 1 Monday, June 12, 2006 4:19 PM

Contents

Setup Menu

General setup menu............................................... 22

Locking/Unlocking the disc for viewing.................22

Dimming the front panel display...............................22

Programming disc tracks (except MP3/WMA/

JPEG/DivX)............................................................................22

OSD language .....................................................................23

Screen saver .........................................................................23

Sleep timer............................................................................23

Auto standby........................................................................24

DivX

VOD registration code..................................24

Audio setup menu................................................... 24

Setting the analog output..............................................24

Setting the digital output...............................................25

Setting the HDMI audio.................................................26

CD upsampling ...................................................................26

Night mode...........................................................................26

Lip synchronization...........................................................27

Video setup menu................................................... 27

TV type....................................................................................27

Setting the TV display .....................................................27

Progressive ............................................................................28

Picture setting......................................................................29

Selecting the black level.................................................30

Closed caption....................................................................30

HDMI setup..........................................................................30

Preference setup menu.......................................... 31

Audio, subtitle and disc menu....................................32

Restricting playback with parental control..........32

Playback of VR format....................................................32

MP3/JPEG menu.................................................................34

Displaying DivX external subtitle files ...................34

Changing the password..................................................35

PBC (Playback control)..................................................35

Resetting the system........................................................35

Language Codes......................... 36

Troubleshooting ........................ 38

Glossary ...................................... 40

Specifications ............................. 42

00EN_DVD-S659_U.book Page 2 Monday, June 12, 2006 4:19 PM

English

Introduction

Thank you for purchasing this unit. This

Owner’s Manual explains the basic

operation of this unit.

DVD discs must be labeled ALL

regions or Region 1 in order to

play on this unit.

You cannot play discs labeled for

other regions.

– Remote control

– Two batteries (AA, R06, UM-3) for the

remote control

– Audio/Video pin cable

(red/white/yellow plugs)

– Owner’s Manual

– This unit can play the disc types

associated with the logos shown below.

Do not attempt to load any other type

of disc into this unit. Doing so may

damage this unit.

– This unit can play

DVD+R/RW/R DL and

DVD-R/RW/R DL

discs recorded in

DVD-Video compatible format.

– This unit can play DVD-RW discs

recorded in VR format (compatible with

CPRM).

– This unit can play the following data

discs (

For MP3 and WMA files, the

parenthetic words represent the

compatible sampling rate and bit rate):

– MP3 files recorded on CD-R/RW,

DVD+R/RW and DVD-R/RW

(fs 32, 44.1, 48 kHz / 96

–

320 kbps

(CBR only))

– WMA (except copy protected

WMA) files recorded on CD-R/RW,

DVD+R/RW and DVD-R/RW

(When in fs 44.1 kHz: 64

–

192 kbps

(CBR only)/ When in fs 48 kHz: 128

–

192 kbps (CBR only))

– JPEG (except Progressive JPEG) files

recorded on CD-R/RW, DVD+R/

RW and DVD-R/RW (compatible

resolution: 3072 x 2048 or less)

– KODAK Picture CD

– FUJICOLOR CD

– DivX Video files recorded on CD-R/

RW, DVD+R/RW and DVD-R/RW

– Official DivX

Ultra Certified

product

– Plays all versions of DivX

video

(including DivX

6) with enhanced

playback of DivX

media files and

the DivX

Media Format

– ISO 9660 Level1/Level2 for CD-R/RW

– Up to 298 folders per disc and up to

648 files per folder with up to 8

hierarchies

Notes:

– CD-R/RW, DVD+R/RW

/R DL

and

DVD-R/RW

/R DL

cannot be played

unless finalized.

– Only the first session of DVD+R

/R DL

and DVD-R/RW

/R DL

can be played.

– Some discs cannot be played depending

on disc characteristics or recording

conditions.

– Do not use any non-standard shaped

discs (heart-shaped, etc.).

– Do not use discs with tape, seals, or

paste on their surface.

– Do not use discs with many scratches

on their surface.

Region codes

Supplied accessories

Notes about discs/content format

ALL

00EN_DVD-S659_U.book Page 3 Monday, June 12, 2006 4:19 PM

Introduction

• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center

out. Do not wipe in a circular motion.

• Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic

spray intended for analog records.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are

trademarks of Dolby Laboratories.

”DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.

HDMI, the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks

of HDMI Licensing LLC.

Cleaning discs

Patent information

This product incorporates copyright protection technology that is protected by method claims of certain

U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,

and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is prohibited.

00EN_DVD-S659_U.book Page 4 Monday, June 12, 2006 4:19 PM

English

Functional Overview

1 STANDBY/ON

Turns on this unit or sets it to the standby

mode.

2 Disc tray

Loads a disc in the disc tray.

3 OPEN/CLOSE (/)

Opens or closes the disc tray.

4 HDMI indicator

Lights up when an HDMI component is

connected, and signals output via the HDMI jack

of this unit.

5 PROGRESSIVE indicator

Lights up when this unit enters the progressive

mode.

6 Front panel display

Shows the current status of this unit.

7 PLAY (B)

Starts playback.

8 PAUSE (;)

Pauses playback.

9 STOP (9)

Stops playback.

1 AC power cord

Connect to a standard AC outlet.

2 HDMI output jack

Connect to the HDMI input jack of your HDMI

component.

3 AUDIO OUT (L, R) jacks

Connect to the audio input jacks of your AV

receiver or stereo system.

4 DIGITAL OUT - COAXIAL jack

Connect to the coaxial input jack of your AV

receiver.

5 VIDEO OUT - COMPONENT (Y, PB, PR

jacks

Connect to the component input jacks of your

AV receiver.

6 VIDEO OUT - S VIDEO jack

Connect to the S-video input jack of your AV

receiver.

7 VIDEO OUT - VIDEO jack

Connect to the composite video input jack of

your AV receiver.

Caution: Do not touch the inner pins of the jacks on the rear panel of this unit.

Electrostatic discharge may cause permanent damage to this unit.

Front panel

HDMI

1 2 3 5 6 7 8 94

Rear panel

HDMI

2134567

00EN_DVD-S659_U.book Page 5 Monday, June 12, 2006 4:19 PM

6 En

Functional Overview

Turns on this unit or sets it to the

standby mode.

2 TOP MENU/RETURN

Displays the top-level disc (DVD).

Moves back to the previous menu (DVD*/

VCD).

3 MENU

Accesses the menu of a disc (DVD).

Switches PBC on or off (VCD).

4 1 / 2/3 / 4

Selects an item in the currently displayed

menu. Search or slow playback.

ENTER/OK

Confirms the menu selection.

5 S

Searches backward.*

Moves to the previous chapter or track.

6 STOP (9)

Stops playback.

Opens the disc tray.*

7 SUBTITLE

Selects the subtitle language.

8 ANGLE

Selects the DVD camera angle.

9 REPEAT

Repeats the chapter, track, title or disc.

Shuffles the chapter or track.

0 A-B

Repeats a specific segment.

q Numeric buttons (0-9)

Selects numbered items in the currently

displayed menu.

w ON SCREEN

Accesses or exits from the on-screen

display (OSD) menu of this unit.

e SETUP

Accesses or exits from the setup menu

of this unit.

r T

Searches forward.*

Moves to the next chapter or track.

t PLAY (B)

Starts playback.

y PAUSE (;)

Pauses playback temporarily.

Frame-by-frame playback.

u AUDIO

Selects the audio language or format.

i ZOOM

Enlarges the video image.

o MUTE

Mutes the audio output. Press again to restore

the audio output to previous volume level.

p SCAN

Previews the content of a track or whole disc

(VCD).

Plays the first 6 seconds or less of each track

(CD).

* Press and hold the button for about two

seconds.

Remote control

MENU SETUP

ENTER

STOP

ANGLE

A B

PAUSE

PLAY

TOP MENU RETURN

ON SCREEN

DVD13

ZOOM AUDIO

SUBTITLE

REPEAT

SCAN MUTE

00EN_DVD-S659_U.book Page 6 Monday, June 12, 2006 4:19 PM

7 En

English

Connections

Be sure to turn off this unit and unplug the

power supply cable, before you make or

change connections.

• Depending on the equipment you wish

to connect, there are various ways to

make connections. Possible connections

are described below.

• Refer to the manuals of your other

components as necessary to make the

best connections.

• Do not connect this unit via your VCR.

The video quality could be distorted by

the copy protection system.

• Do not connect the audio out jack of

this unit to the phono in jack of your

audio system.

Digital connection

This unit has a coaxial digital out jack.

Connect DIGITAL OUT - COAXIAL jack

of this unit to your AV receiver equipped

with Dolby Digital, DTS, or MPEG

decoder using a commercially available

coaxial cable.

You need to set “DIGITAL OUTPUT” to

“ALL” (see “DIGITAL OUTPUT” on

page 25).

Notes:

– If the audio format of the digital output

does not match the capabilities of your

receiver, the receiver produces a distorted

sound or no sound at all. Make sure to

select the appropriate audio format from

the menu screen on the disc.

Pressing AUDIO on the remote control once

or more may change not only the audio

languages but also the audio format. The

selected format appears in the front panel

display for several seconds.

– If you wish to enjoy Dolby Digital, DTS and

MPEG formats, you must connect this unit

to an AV receiver that supports these

formats.

Analog connection

This unit has analog output jacks.

Connect AUDIO OUT (L, R) jacks of this

unit to the corresponding input jacks of

your audio component (such as a stereo

amplifier) using the supplied audio pin

cable.

General notes on connections

Audio connections

COAXIAL

AV receiver

Left front

speaker

Right surround

speaker

Center

speaker

Subwoofer

Right front

speaker

Left surround

speaker

Surround

back speaker

This unit

CD/DVD

Right

speaker

Left

speaker

Audio pin cable

This unit

Stereo

amplifier

00EN_DVD-S659_U.book Page 7 Monday, June 12, 2006 4:19 PM

8 En

Connections

If your AV receiver has video output jacks,

connect your receiver and then your TV

so that you can use one TV for several

different video sources (LD, VCR, etc.) by

simply switching the input source selector

of your receiver.

This unit has four types of video output

jacks. Use the one that corresponds to the

input jacks of the component to be

connected.

Component video jacks <A>

Component video connections achieve

high fidelity color reproduction than S-

video connections by transmitting video

signals on separate wires for luminance (Y:

green) and chrominance (P

B: blue, PR: red).

Connect VIDEO OUT - COMPONENT

(Y, P

B, PR jacks of this unit to component

input jacks of your AV receiver and then to

those of your TV using a commercially

available component cable. Observe the

color of each jack when you make

connections.

If your receiver does not have component

output jacks, you can achieve a better

video image by connecting the component

output jacks of this unit directly to the

component input jacks of your TV.

S-video jack <B>

S-video connections achieve a clearer

picture than composite video connections

by transmitting video signals on separate

wires for luminance (Y) and chrominance

(C).

Connect VIDEO OUT - S VIDEO jack of

this unit to S-video input jack of your AV

receiver and then to that of your TV using

a commercially available S-video cable.

Composite video jack <C>

Connect VIDEO OUT - VIDEO jack of this

unit to video input jack of your AV

receiver and then to that of your TV using

the supplied video pin cable.

Video connections

VIDEO

OUT

VIDEO

COMPONENT

VIDEO OUT

COMPONENT

VIDEO IN

S VIDEO

OUT

S VIDEO

COMPONENT

VIDEO IN

S VIDEO

INPUT

VIDEO

INPUT

YPBPR

AV receiver

Video pin cable

This unit

00EN_DVD-S659_U.book Page 8 Monday, June 12, 2006 4:19 PM

9 En

English

Connections

HDMI jack

Connect the HDMI output jack of this unit

to an HDMI input jack of your TV using a

commercially available HDMI cable.

You need to set “HDMI AUDIO” (see

page 26) and “HDMI VIDEO” (see page 30).

Notes:

– You need to make an appropriate audio

connections if the connected component

does not output audio signals (see “Audio

connections” on page 7).

– This unit is not compatible with HDCP-

incompatible HDMI or DVI components.

– You need a commercially available HDMI/

DVI conversion cable when you connect this

unit to other DVI components. In this case,

the HDMI jack of this unit does not output

any audio signals.

– Depending on the connected DVI

component, black and white in the image

may not be distinct. In that case, adjust the

picture setting of the connected DVI

component.

– When connecting an HDMI component,

refer to the instruction manual for the

component.

– Do not disconnect or turn off the power of

the HDMI/DVI component connected to

the HDMI jack of this unit while data is

being transferred. Doing so may disrupt

playback or cause noise.

HDMI connections

HDMI IN

HDMI

This unit

HDMI cable

00EN_DVD-S659_U.book Page 9 Monday, June 12, 2006 4:19 PM

10 En

Getting Started

1 Open the battery compartment.

2 Insert the two supplied batteries (AA, R06,

UM-3) following the indications (+/–)

inside the compartment.

3 Close the cover.

Notes:

– Insert batteries correctly according to the

polarity markings (+/–). The batteries

inserted in the opposite direction may leak.

– Replace the exhausted batteries

immediately with new ones to prevent a

leakage.

– Remove the batteries from the

compartment if the remote control is not

used for more than a month.

– If the batteries have leaked, dispose of

them immediately. Avoid touching the

leaked material or letting it come into

contact with clothing, etc. Clean the battery

compartment thoroughly before installing

new batteries.

– Do not use old batteries together with new

ones.

– Do not use different types of batteries (such

as alkaline and manganese batteries)

together. Read the packaging carefully as

these different types of batteries may have

the same shape and color.

– Dispose of the batteries correctly in

accordance with your local regulations.

Using the remote control

Handling the remote control

• Do not spill water or other liquids on

the remote control.

• Do not drop the remote control.

• Do not leave or store the remote

control in the following types of

conditions:

– places of high humidity, such as near a

bath

– places of high temperature, such as near

a heater or stove

– places of extremely low temperature

– dusty places

Step 1: Inserting batteries into

the remote control

30°

Point the remote control at

the remote control sensor,

within approximately 6 m

(20 feet) from this unit.

Remote control

sensor

00EN_DVD-S659_U.book Page 10 Monday, June 12, 2006 4:19 PM

11 En

English

Getting Started

1 Connect the AC power cord to the power

outlet.

2 Turn on your TV and AV receiver.

3 Select the appropriate input source of the

AV receiver connected to this unit. Refer

to the manual supplied with your AV

receiver for details.

4 Turn on this unit.

5 Set the TV to the correct Video IN channel

(e.g. EXT1, EXT2, AV1, AV2, AUDIO/

VIDEO, etc. Refer to the manual supplied

with your TV for details).

➜ The front panel display lights up and the

default screen appears on the TV.

Setting a color system for your

This unit is compatible with both NTSC

and PAL video formats. Select the color

system that matches your TV.

1 Press SETUP.

2 Press 2 repeatedly to select “VIDEO

SETUP PAGE”.

3 Press 3

/ 4 to highlight [TV TYPE], and

then press 2.

4 Press 3

/ 4 to highlight one of the following

options.

PAL

Select this if the connected TV is a PAL

system TV. It will change the video signals

of NTSC discs and output them in PAL

format.

NTSC

Select this if the connected TV is an NTSC

system TV. It will change the video signals

of PAL discs and output them in NTSC

format.

MULTI

Select this if the connected TV is

compatible with both NTSC and PAL

formats (such as a multi-system TV).

The output format will be in accordance

with the video signals of the disc.

5 Select an item, and then press

ENTER/OK to confirm your selection.

Notes:

– Before changing the current TV standard

setting, ensure that your TV supports the

selected TV type.

– If the picture is not displayed properly on

your TV, wait for 15 seconds for this unit to

activate automatic recovery.

– When making HDMI connections, you

cannot change or select [TV TYPE].

Step 2: Turning on the power

Step 3: Setting a TV type and

display

VIDEO SETUP PAGE

TV TYPE PAL

TV DISPLAY NTSC

PROGRESSIVE MULTI

PICTURE SETTING

BLACK LEVEL

CLOSED CAPTION

HDMI SETUP

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

CANCELOK

CHANGING NTSC TO PAL:

1. ENSURE THAT YOUR TV SUPPORTS

PAL STANDARD.

2. IF THERE IS A DISTORTED PICTURE

DISPLAYED ON THE TV, WAIT 15

SECONDS FOR AUTO RECOVER.

00EN_DVD-S659_U.book Page 11 Monday, June 12, 2006 4:19 PM

12 En

Getting Started

Setting an aspect ratio for your

You can set the aspect ratio of this unit to

match your TV. If the aspect ratio of your

TV is 4:3, you do not need to change this

setting. If you have a widescreen TV,

change this setting according to the

following procedure.

For details, see “Setting the TV display” on

page 27.

1 Press SETUP.

2 Press 2 repeatedly to select “VIDEO

SETUP PAGE”.

3 Press 3

/ 4 to highlight [TV DISPLAY], and

then press 2.

4 Press 3

/ 4 to highlight [16:9], and then

press ENTER/OK to confirm the

selection.

You can select your own preferred

language settings.This unit automatically

switches to your preferred language

whenever you load a disc. If the selected

language is not available on the disc, the

default language of the disc will be used

instead. The OSD language in the system

menu remains once selected.

Setting the OSD Language

1 Press SETUP.

2 Press 1 / 2 to select “GENERAL SETUP

PAGE”.

3 Press 3

/ 4 to highlight [OSD

LANGUAGE], and then press 2.

4 Press 3

/ 4 to select a language, and then

press ENTER/OK to confirm your

selection.

VIDEO SETUP PAGE

TV TYPE

TV DISPLAY 4:3 PAN SCAN

PROGRESSIVE 4:3 LETTER BOX

PICTURE SETTING 16:9

BLACK LEVEL

CLOSED CAPTION

HDMI SETUP

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

Step 4: Setting a language

preference

GENERAL SETUP PAGE

DISC LOCK

DISPLAY DIM

PROGRAM

OSD LANGUAGE ENGLISH

SCREEN SAVER ESPAÑOL

SLEEP FRANÇAIS

AUTO STANDBY

DIVX(R) VOD CODE

00EN_DVD-S659_U.book Page 12 Monday, June 12, 2006 4:19 PM

13 En

English

Getting Started

Setting the audio, subtitle and

disc menu languages

(DVD-Video only)

1 Press STOP (9) twice, and then press

SETUP.

2 Press 2 repeatedly to select

“PREFERENCE PAGE”.

3 Press 3

/ 4 to highlight one of the options

below at a time, and then press 2.

– AUDIO (audio language)

– SUBTITLE (subtitle language)

– DISC MENU (disc menu language)

4 Press 3

/ 4 to select a language, and then

press ENTER/OK to confirm your

selection.

If the language you want is not in the

list, select [OTHERS],

and then use the numeric buttons (0-9)

on the remote control to enter the 4-digit

language code (see “Language Codes” on

page 36), and then press ENTER/OK to

confirm the code.

5 Repeat steps 3–4 for other language

settings.

PREFERENCE PAGE

AUDIO ENGLISH

SUBTITLE CHINESE (SIMP)

DISC MENU FRENCH

PARENTAL SPANISH

VR LIST PORTUGUESE

MP3/JPEG NAV POLISH

DIVX SUBTITLE ITALIAN

PASSWORD TURKISH

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

00EN_DVD-S659_U.book Page 13 Monday, June 12, 2006 4:19 PM

14 En

Disc Operation

IMPORTANT!

– If the inhibition icon ( ) appears

on the TV screen when a button is

pressed, the function for that

button is not available on the

current disc or at the current time.

– Depending on the DVD or VIDEO

CD disc, some operations may

operate differently or be

restricted.

– Do not push on the disc tray or put

any objects other than discs on the

disc tray. Doing so may cause this

unit to malfunction.

1 Press STANDBY/ON on the front panel

or on the remote control to turn on

this unit.

2 Press OPEN/CLOSE (/) on the front

panel to open the disc tray.

3 Place the disc in the disc tray with the

printed side up.

4 Press OPEN/CLOSE (/) again to close

the disc tray.

➜ After recognizing the disc, this unit

begins to play back automatically.

• If you press PLAY (B) when the disc

tray is open, the disc tray closes and

playback starts automatically.

Unless stated otherwise, all operations

described here are carried out using the

supplied remote control.

Pausing playback

1 During playback, press PAUSE (;).

➜ Playback is paused and the sound is

muted.

2 Press PAUSE (;) again to select the next

picture frame.

3 To resume normal playback, press

PLAY (B).

Selecting track/chapter

• Press S / T or use the numeric

buttons (0-9) to select a track/chapter

number.

• During repeated playback, press S /

T to replay the same track/chapter.

Searching backward/forward

1 Press and hold S / T or press 1 / 2.

2 While searching, press S / T or

/ 2 repeatedly to select the desired

speed.

3 To resume normal playback, press

PLAY (B).

Notes:

– 1

/ 2 key may not be available with some

discs.

– For MP3 and WMA, the search function

allows you to search the track currently

being played.

Stopping playback

• Press STOP (9).

Basic playback

General operation

TIPS: The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the disc.

00EN_DVD-S659_U.book Page 14 Monday, June 12, 2006 4:19 PM

15 En

English

Disc Operation

Repeat and shuffle

• Each time you press REPEAT during

playback, the front panel display changes

as follows:

DVD

➔ RPT ONE (repeat chapter)

➔ RPT TT (repeat title)

➔ RPT ALL (repeat disc)

➔ SHUFFLE (shuffle)

➔ RPT SHF (shuffle repeat)

➔ RPT OFF (repeat off)

VCD/SVCD/CD

➔ RPT ONE (repeat track)

➔ RPT ALL (repeat disc)

➔ SHUFFLE (shuffle)

➔ RPT SHF (shuffle repeat)

➔ RPT OFF (repeat off)

MP3/WMA/DivX

➔ RPT ONE (repeat track)

➔ RPT FLD (repeat folder)

➔ SHUFFLE (shuffle)

➔ RPT OFF (repeat off)

Note:

– For VCD, repeat playback is not possible

when the PBC mode is selected.

Repeating a section within a

chapter/track

1 While playing a disc, press A-B at the

desired starting point.

2 Press A-B again at the desired end point.

•A and B can only be set within the same

chapter/track.

➜ The selected section repeats

continuously.

3 To exit from the sequence, press A-B.

Using the disc menu

Depending on the disc, a menu may appear

on the TV screen once you load the disc.

To select a playback feature or item

• Use

1 / 2/3 / 4 or the numeric buttons

(0-9), and then press ENTER/OK to

start playback.

To access or exit from the menu

• Press MENU.

Slow motion

You can play back in slow motion.

1 Press 3 for reverse slow motion or 4 for

forward slow motion.

2 During slow motion, press 3

/ 4

repeatedly to select the desired speed.

3 To resume normal playback, press

PLAY (B).

Note:

– Reverse slow motion is not available for

VCDs and SVCDs.

Selecting the various repeat/

shuffle functions

TIPS: The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the disc.

Operations for video playback

(DVD/VCD/SVCD)

00EN_DVD-S659_U.book Page 15 Monday, June 12, 2006 4:19 PM

16 En

Disc Operation

Zooming in

This function allows you to enlarge or

lessen the picture on the TV screen and to

pan through the enlarged picture.

1 During playback, press ZOOM repeatedly

to display the picture at different scales.

• Use

1 / 2/3 / 4 to pan through the

enlarged picture.

➜ Playback continues.

2 Press ZOOM repeatedly to return to the

original size.

Resuming playback from the last

stopped point

You can resume playback of the last 10

discs, even if the discs were ejected or the

power of this unit was turned off.

1 Load one of the last 10 discs.

➜ “LOADING” appears on the TV screen.

2 Press PLAY (B) while “LOADING” is

displayed on the TV screen.

➜ “RESUME PLAY” appears on the TV

screen and the disc is played back from

the last point.

To cancel the resume mode

• When playback is stopped, press

STOP (9) again.

On-screen display (OSD)

The OSD menu shows disc playback

information (e.g., the title or chapter

number, elapsed playing time or audio/

subtitle language). A number of operations

are possible without interrupting disc

playback.

1 During playback, press ON SCREEN.

➜ A list of available disc information

appears on the TV screen.

DVD

VCD/SVCD

2 Press 3 / 4 to view the information, and

then press ENTER/OK to access the

selected item.

3 Use the numeric buttons (0-9) to input

the number/time or press 3

/ 4 to make a

selection, and then press ENTER/OK to

confirm the selection.

➜ Playback changes to the selected time

or to the selected title/chapter/track.

TIPS: The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the disc.

TITLE 02/14

CHAPTER 02/14

AUDIO 5.1CH

SUBTITLE ENG

BITRATE 16 TITLE ELAPSED 0:02:25

TRACK 02/14

DISC TIME 0:49:17

TRACK TIME 0:03:43

REPEAT OFF

BITRATE 16 TOTAL ELAPSED 0:02:25

00EN_DVD-S659_U.book Page 16 Monday, June 12, 2006 4:19 PM

17 En

English

Disc Operation

Title/Chapter/Track selection

(DVD/VCD)

1 Press 3

/ 4 to select [TITLE] or

[CHAPTER] (DVD) or [TRACK] (VCD).

2 Press ENTER/OK to confirm the

selection.

3 Select a title, chapter or track number

using the numeric buttons (0-9).

Time search (DVD/VCD)

1 Press 3

/ 4 to select [TT TIME] or [CH

TIME] (DVD) or [TRACK TIME] or [DISC

TIME] (VCD).

• [TT TIME] refers to the total time of the

current title, and [CH TIME] refers to

the total time of the current chapter.

2 Press ENTER/OK to confirm the

selection.

3 Enter hours, minutes and seconds from left

to right using the numeric buttons (0-9)

(e.g. 0:34:27).

Audio/Subtitle/Angle (DVD)

You can change [AUDIO], [SUBTITLE] or

[ANGLE] if these functions are available on

the disc you are playing.

1 Press 3

/ 4 to select [AUDIO],

[SUBTITLE] or [ANGLE].

2 Press ENTER/OK to confirm the

selection.

3 For Audio and Subtitle:

Press 3

/ 4 to highlight your selection, and

then press ENTER/OK.

For Angle:

Select an angle using the numeric

buttons (0-9).

Repeat/Time Display (DVD/VCD)

1 Press 3

/ 4 to select [REPEAT] or [TIME

DISP.].

2 Press ENTER/OK to confirm the

selection.

3 Press 3

/ 4 to highlight your selection, and

then press ENTER/OK.

Time display (CD)

Each time you press ON SCREEN, the

time display changes as follows:

Playing by title

1 Press MENU.

➜ The disc title menu appears on the TV

screen.

2 Use

1 / 2/3 / 4 or the numeric buttons

(0-9) to select a playback option.

3 Press ENTER/OK to confirm your

selection.

Camera angle

• Press ANGLE repeatedly to select the

desired angle.

TIPS: The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the disc.

Special DVD features

TOTAL ELAPSED TOTAL REMAIN

SINGLE REMAIN

SINGLE ELAPSED

00EN_DVD-S659_U.book Page 17 Monday, June 12, 2006 4:19 PM

18 En

Disc Operation

Audio

Changing the audio language and/or

format

• Press AUDIO repeatedly to select an

audio language.

Subtitles

• Press SUBTITLE repeatedly to select

a subtitle language.

Playback control (PBC)

For VCD with playback control

(PBC) feature (version 2.0 only)

Press MENU to toggle between “PBC

ON” and “PBC OFF”.

➜ If you select “PBC ON”, the disc menu

(if available) appears on the TV screen.

• Use S / T or the numeric

buttons (0-9) to select a playback

option.

• During playback, press TOP

MENU/RETURN to return to the

menu screen.

If you want to skip the index menu

and play back a disc directly from the

beginning,

• Press MENU on the remote control to

turn off PBC.

Preview function

1 Press SCAN.

➜ A list appears on the TV screen.

2 Press 3 / 4 to highlight [TRACK DIGEST],

[DISC INTERVAL] or [TRACK INTERVAL].

TRACK DIGEST

This function minimizes the picture for

every track and displays six at a time on the

screen to help you view the tracks on the

disc.

DISC INTERVAL

This function is used to divide a disc into

six parts at regular intervals, and display

them on one page to help you preview the

entire disc.

TRACK INTERVAL

This function is used to divide a single track

into six parts at regular intervals, and

display them on one page to help you

preview the selected track.

Note:

– You can only select [TRACK INTERVAL]

during playback when PBC is turned off.

Special VCD/SVCD features

SELECT DIGEST TYPE:

TRACK DIGEST

DISC INTERVAL

TRACK INTERVAL

TIPS: The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the disc.

00EN_DVD-S659_U.book Page 18 Monday, June 12, 2006 4:19 PM

19 En

English

Disc Operation

3 Press ENTER/OK.

➜ Thumbnail pictures appear on the TV

screen.

4 Use 1 / 2/3 / 4 to select a track or use the

numeric buttons (0-9) to input the

selected track number.

5 Press S / T to open the previous or

next page.

6 Press ENTER/OK to confirm the

selection.

To quit the preview function

• Use

1 / 2/3 / 4 to highlight [EXIT] and

press ENTER/OK.

To return to the preview menu

• Use

1 / 2/3 / 4 to highlight [MENU] and

press ENTER/OK.

For CD:

•When playback is stopped, press SCAN.

➜ Each track is played for a few seconds.

General operation

1 Load a disc.

• The disc reading time may exceed 30

seconds due to the complexity of the

directory/file configuration.

➜ The data disc menu appears on the TV

screen.

2 Playback starts automatically. If not, press

PLAY (B).

During playback, you can:

• Press S / T to select another

track/file in the current folder.

• Press PAUSE (;) to pause playback.

Note:

– It may not be possible to play certain MP3/

WMA/JPEG/DivX discs due to the

configuration and characteristics of the

discs or the recording conditions.

(Example of 6 thumbnails in the display)

TYPE:TITLE

SELECT(01-06):- -

EXIT MENU NEXT

Playing data discs (MP3/WMA/

JPEG/DivX)

00:00 00:00

001/020

Piano

Cello

Jazz

Live

Favorite

MP3

TIPS: The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the disc.

00EN_DVD-S659_U.book Page 19 Monday, June 12, 2006 4:19 PM

20 En

Disc Operation

Selecting a folder and track/file

1 Press 3 / 4 to select a folder, and then

press ENTER/OK to open the folder.

2 Press 3

/ 4 to select a track/file.

3 Press ENTER/OK to confirm your

selection.

➜ Playback starts from the selected file to

the end of the folder.

Repeat and shuffle

When the MP3 disc/WMA disc/picture

disc menu is shown on the screen;

• Press REPEAT repeatedly to select a

“Play Mode”.

➜ FOLDER: files are played back once.

➜ REPEAT ONE: one file is played

repeatedly.

➜ REPEAT FOLDER: all files in one folder

are played repeatedly.

➜ SHUFFLE: all files in the current folder

are played in random order.

1 Load a picture disc (JPEG, Kodak Picture

CD and Fujicolor CD).

➜ For JPEG discs, the picture menu

appears on the TV screen.

➜ For Kodak Picture CDs and Fujicolor

CDs, the slideshow begins.

2 Press PLAY (B) to start the slideshow.

Preview function

This function displays the content of the

current folder or the entire disc.

1 Press STOP (9) during playback.

➜ 12 thumbnail pictures appear on the TV

screen.

2 Press S / T to display the other

pictures on the previous/next page.

3 Use

1 / 2/3 / 4 to highlight one of the

pictures, and then press ENTER/OK to

start playback.

Move the cursor to highlight on the

bottom of the page to start playback from

the first picture on the current page.

For JPEG discs:

4 Press MENU to return to JPEG disc

menu.

Zooming pictures

1 During playback, press ZOOM repeatedly

to display the picture at different scales.

2 Use

1 / 2/3 / 4 to view the zoomed picture.

Special picture disc features

TIPS: The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the disc.

00EN_DVD-S659_U.book Page 20 Monday, June 12, 2006 4:19 PM

21 En

English

Disc Operation

Playback with multi-angles

• During playback, press 1 / 2/3 / 4 to

rotate the picture on the TV screen.

rotates the picture counter-clockwise

2: rotates the picture clockwise

3: flips the picture vertically

4: flips the picture horizontally

Scan effect

• Press ANGLE repeatedly to choose a

scan effect.

➜ Various scan effects appear in the top

left corner of the TV screen.

Playing MP3 music and JPEG

picture simultaneously

1 Load a disc that contains both MP3 music

and JPEG picture data.

➜ The disc menu appears on the TV

screen.

2 Select an MP3 music track.

3 During MP3 music playback, select a JPEG

picture file from the TV screen, and then

press PLAY (B).

➜ The picture files are played back one

after another until the end of the folder.

4 To quit simultaneous playback, press

MENU, and then press STOP (9).

Note:

– Some files cannot be played correctly

depending on disc characteristics or

recording conditions.

DivX files including DMF (DivX

Media Format) features only

Interactive menu

1 Load a disc.

➜ The interactive menu appears on the TV

screen.

2 Use

1 / 2/3 / 4 to select a chapter.

3 Press ENTER/OK or PLAY (B) to start

playback of the selected chapter.

To access the interactive menu

• During playback, press MENU.

To return to the data disc menu

screen

• When the interactive menu is displayed,

press STOP (9).

Multiple audio and subtitle

languages

To select an audio language

• During playback, press AUDIO to

switch the audio language recorded on

the contents.

To select a subtitle language

• During playback, press SUBTITLE to

switch or turn on/off the subtitle

language recorded on the contents.

Note:

– For information about external subtitle files,

see “Displaying DivX external subtitle files”

on page 34.

TIPS: The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the disc.

Special DivX features

00EN_DVD-S659_U.book Page 21 Monday, June 12, 2006 4:19 PM

22 En

Setup Menu

Setup is carried out on the TV screen,

enabling you to customize this unit to suit

your own particular requirements.

1 Press SETUP

2 Press 1

/ 2 to select “GENERAL SETUP

PAGE”.

3 Press ENTER/OK to confirm your

selection.

Locking/Unlocking the disc for

viewing

Not all discs are rated or coded by the

manufacturer of the disc. You can prevent

playback of a specific disc by locking the

disc. You can lock up to 40 discs on this

unit.

1 In “GENERAL SETUP PAGE”, press 3

/ 4

to highlight [DISC LOCK], and then

press 2.

LOCK

Select this to lock playback of the current

disc. Subsequent access to a locked disc

requires six-digit password.

The default password is “000 000” (see

“Changing the password” on page 35).

UNLOCK

Select this to unlock the disc and allow

future playback.

2 Press 3

/ 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

Dimming the front panel display

You can select different levels of

brightness for the front panel display.

1 In “GENERAL SETUP PAGE”, press 3

/ 4

to highlight [DISPLAY DIM], and then

press 2.

100%

Select this for full brightness.

70%

Select this for medium brightness.

40%

Select this for dimming display.

2 Press 3 / 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

Programming disc tracks

(except MP3/WMA/JPEG/DivX)

You can play back the contents of a disc in

the desired order by programming the

tracks to be played. You can store up to 20

tracks per disc with a maximum of 10

discs.

1 In “GENERAL SETUP PAGE”, press 3

/ 4

to highlight [PROGRAM], and then press 2

to select [INPUT MENU].

2 Press ENTER/OK to confirm your

selection.

➜ The input menu appears on the TV

screen.

General setup menu

GENERAL SETUP PAGE

DISC LOCK

DISPLAY DIM

PROGRAM

OSD LANGUAGE

SCREEN SAVER

SLEEP

AUTO STANDBY

DIVX(R) VOD CODE

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

00EN_DVD-S659_U.book Page 22 Monday, June 12, 2006 4:19 PM

23 En

English

Setup Menu

To input your favorite tracks/chapters

3 Use the numeric buttons (0-9) to enter

a valid track/chapter number.

4 Use

1 / 2/3 / 4 to move the cursor to the

next position.

• If the track/chapter number is more

than ten, press T to move to the

next page, and then proceed with

programming.

• Use

1 / 2/3 / 4 to highlight [NEXT] on

the program menu, and then press

ENTER/OK.

5 Repeat steps 3–4

to input another track/

chapter number.

To remove a track

6 Use

1 / 2/3 / 4 to move the cursor to the

track you want to remove.

7 Press ENTER/OK to remove this track

from the program menu.

To start program playback

8 Use

1 / 2/3 / 4 to highlight [START] on the

program menu, and then press

ENTER/OK.

➜ Playback starts for the selected tracks in

the programmed sequence.

To exit from program playback

9 Use

1 / 2/3 / 4 to highlight [EXIT] on the

program menu, and then press

ENTER/OK.

OSD language

This menu contains various options for the

on-screen display (OSD) language. For

details, see “Setting the OSD Language” on

page 12.

Screen saver

This function is used to turn on or off the

screen saver.

1 In “GENERAL SETUP PAGE”, press 3

/ 4

to highlight [SCREEN SAVER], and then

press 2.

Select this if you wish to turn off the TV

screen when disc playback is stopped or

paused for more than 15 minutes.

OFF

Select this to disable the screen saver

function.

2 Press 3

/ 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

Sleep timer

This feature automatically sets this unit to

the standby mode after a certain elapsed

period.

1 In “GENERAL SETUP PAGE”, press 3

/ 4

to highlight [SLEEP], and then press 2.

2 Press 3

/ 4 to select a setting.

• You can select from 30, 60, 90, 120 and

150 minutes. Select [OFF] to cancel the

sleep timer function.

3 Press ENTER/OK to confirm your

selection.

1 04

2 10

3 _ _

4 _ _

5 _ _

6 _ _

7 _ _

8 _ _

9 _ _

10 _ _

PROGRAM: TRACK (01-17)

EXIT START NEXT

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

00EN_DVD-S659_U.book Page 23 Monday, June 12, 2006 4:19 PM

24 En

Setup Menu

Auto standby

This function is used to turn the auto

standby mode on or off when disc playback

is stopped for more than 30 minutes.

1 In “GENERAL SETUP PAGE”, press 3

/ 4

to highlight [AUTO STANDBY], and then

press 2.

Select this if you wish to set this unit to the

standby mode automatically when disc

playback is stopped or paused for more

than 30 minutes.

OFF

Select this to disable the auto standby

function.

2 Press 3

/ 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

DivX

VOD registration code

Yamaha provides you with a DivX

VOD

(Video On Demand) registration code that

allows you to rent and purchase videos

using the DivX

VOD service.

For more information, visit at

www.divx.com/vod.

1 In “GENERAL SETUP PAGE”, press 3

/ 4

to highlight [DIVX(R) VOD CODE], and

then press 2.

➜ The registration code appears.

2 Press ENTER/OK to exit.

3 Use the registration code to purchase or

rent the videos from DivX

VOD service

at www.divx.com/vod. Follow the

instructions and download the video onto

a CD-R for playback on this unit.

Notes:

– All the downloaded videos from DivX

VOD can only be played back on this unit.

– Time search feature is not available during

DivX movie playback.

1 Press SETUP.

2 Press 1

/ 2 to select “AUDIO SETUP

PAGE”.

3 Press ENTER/OK to confirm your

selection.

Setting the analog output

Set the analog output to match the

playback capability of this unit.

1 In “AUDIO SETUP PAGE”, press 3 / 4 to

highlight [ANALOG OUTPUT], and then

press 2.

STEREO

Select this to change channel output to

stereo, which only delivers sound from the

two front speakers.

LT/RT

Select this if this unit is connected to a

Dolby Pro Logic decoder.

Audio setup menu

AUDIO SETUP PAGE

ANALOG OUTPUT

DIGITAL AUDIO

HDMI AUDIO

CD UPSAMPLING

NIGHT MODE

LIP SYNC

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

00EN_DVD-S659_U.book Page 24 Monday, June 12, 2006 4:19 PM

25 En

English

Setup Menu

VIRTUAL SURR

Select this to virtually reproduce the

surround channels.

2 Press 3

/ 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

Setting the digital output

The [DIGITAL AUDIO] options are:

“DIGITAL OUTPUT” and “LPCM

OUTPUT”.

1 In “AUDIO SETUP PAGE”, press 3

/ 4 to

highlight [DIGITAL AUDIO], and then

press 2.

2 Press 3

/ 4 to highlight an option.

3 Press 2 to enter a submenu.

DIGITAL OUTPUT

Set the digital output according to your

optional audio component connections.

OFF

Select this to turn off the digital output.

ALL

Select this if you have connected the digital

audio output jack to a multi-channel

decoder/receiver.

PCM ONLY

Select this only if your receiver is not

capable of decoding multi-channel audio

signals.

LPCM OUTPUT

Select this if you have connected this unit

to a PCM-compatible receiver via a digital

terminal, such as the coaxial terminal. In

this case, you may need to adjust “LPCM

OUTPUT”.

Discs are recorded at a certain sampling

rate. The higher the sampling rate, the

better the sound quality.

48KHz

Select this to play back discs recorded at

the sampling rate of 48 kHz. All 96 kHz

PCM data streams (if available) are

converted to the sampling rate of 48 kHz.

96KHz

Select this to play back discs recorded at

the sampling rate of 96 kHz. If the 96 kHz

disc is copy protected, the digital output is

automatically converted to the sampling

rate of 48 kHz.

4 Press 3

/ 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

00EN_DVD-S659_U.book Page 25 Monday, June 12, 2006 4:19 PM

26 En

Setup Menu

Setting the HDMI audio

When you connect this unit to an HDMI

compatible component via the HDMI jack,

select to turn on or off the HDMI audio

output.

1 In ‘AUDIO SETUP PAGE’, press 34 to

highlight [HDMI AUDIO], then press 2.

Select this to turn on the HDMI audio

output.

OFF

Select this to turn off the HDMI audio

output.

Notes:

– If you are not using the HDMI audio

output, you should set this to [OFF].

– If the monitor/receiver connected to this

unit using HDMI does not support HDMI

audio signal input, set this to [OFF].

– This unit can output following audio signals

using HDMI: 32/44.1/48 kHz, 2ch linear

PCM signals and bitstream signals (Dolby

Digital, DTS and MPEG).

– When audio signals are being output by

HDMI-compatible components, digital

output signals are muted.

– When [DIGITAL OUTPUT] is set to [OFF]

on this unit, HDMI audio is muted even if

[HDMI AUDIO] is set to [ON] and an

HDMI connection is established between

the monitor and receiver.

– When [DIGITAL OUTPUT] is set to [ALL]

on this unit, PCM signals are still output if

the monitor and receiver only support the

PCM format. However, the audio output is

muted when audio format plays back the

DTS source.

CD upsampling

This feature allows you to convert your

music CD to a higher sampling rate using

sophisticated digital signal processing for

better sound quality. If you activate the

upsampling function, this unit automatically

switches to the stereo mode.

1 In “AUDIO SETUP PAGE”, press 3

/ 4 to

highlight [CD UPSAMPLING], and then

press 2.

OFF

Select this to disable CD-upsampling.

88.2kHz (X2)

Select this to convert the sampling rate of

CDs to twice that of the original.

176.4kHz (X4)

Select this to convert the sampling rate of

CDs to four times that of the original.

2 Press 3

/ 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

Note:

– This setting is only valid for the signals

output at the analog jacks.

Night mode

In the night mode, high volume output is

softened and low volume output is brought

upward to an audible level. It is useful when

you watch your favorite action movie

without disturbing others at night.

1 In “AUDIO SETUP PAGE”, press 3

/ 4

to highlight [NIGHT MODE], and then

press 2.

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

00EN_DVD-S659_U.book Page 26 Monday, June 12, 2006 4:19 PM

27 En

English

Setup Menu

Select this to level out the volume. This

feature is only available for movies with the

Dolby Digital mode.

OFF

Select this when you want to enjoy the full

dynamic range of surround sound.

2 Press 3

/ 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

Lip synchronization

This feature allows you to delay the sound

output in order to synchronize it with the

video image. This may be necessary when

you use certain LCD monitors or

projectors.

1 In “AUDIO SETUP PAGE”, press 1

/ 2 to

highlight [LIP SYNC], and then press 2.

2 Press 1

/ 2 to adjust the delay time

(between 00 ms and 200 ms), and then

press ENTER/OK to confirm your

selection.

1 Press SETUP.

2 Press 1 / 2 to select “VIDEO SETUP PAGE”.

3 Press ENTER/OK to confirm your

selection.

TV type

This menu contains the options for

selecting the color system that matches

your TV. For details, see “Step 3: Setting a

TV type and display” on page 11.

Setting the TV display

Set the aspect ratio of this unit to match

your TV. The format you select must be

available on the disc. Otherwise, the TV

display setting will not affect the picture

during playback.

1 In “VIDEO SETUP PAGE”, press 3

/ 4 to

highlight [TV DISPLAY], and then press 2.

2 Press 3

/ 4 to highlight one of the following

options.

4:3 PAN SCAN

Select this if the aspect ratio of your TV is

4:3 and you want both sides of the picture

to be trimmed or formatted to fit your TV

screen.

4:3 LETTER BOX

Select this if the aspect ratio of your TV is

4:3. In this case, a wide picture with black

bands on the upper and lower portions of

the TV screen are displayed.

16:9

Select this if you have a widescreen TV.

Video setup menu

VIDEO SETUP PAGE

TV TYPE

TV DISPLAY

PROGRESSIVE

PICTURE SETTING

BLACK LEVEL

CLOSED CAPTION

HDMI SETUP

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

00EN_DVD-S659_U.book Page 27 Monday, June 12, 2006 4:19 PM

28 En

Setup Menu

3 Select an item, and then press

ENTER/OK to confirm your selection.

The relationship between the setting of

this unit and the TV display

When the aspect ratio of your TV is 4:3:

When the aspect ratio of your TV is 16:9

(widescreen):

*1: If the disc is not assigned to playback

with panscan, it is played with

letterbox.

*2: The side of the picture may be

stretched depending on the TV. In this

case, check the screen size and aspect

ratio of your TV.

Progressive

This feature is only valid if you have

connected this unit to a progressive scan

TV through the component video jacks

(see “Component video jacks <A>” on

page 8).

1 In “VIDEO SETUP PAGE”, press 3

/ 4

to highlight [PROGRESSIVE], and then

press 2.

OFF

Select this to disable the progressive scan

function.

Select this to enable the progressive scan

function.

2 Press 3

/ 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

Notes on activating progressive scan:

– Ensure that your TV is equipped with

progressive scan.

– Connect using a component video

cable.

– When making HDMI connections, you

cannot select [PROGRESSIVE].

Setting

Playback

disc

TV display

4:3 PAN

SCAN

4:3 LETTER

BOX

16:9

4:3

16:9

4:3

16:9

4:3

Setting

Playback

disc

TV display

CONSUMERS SHOULD NOTE THAT NOT ALL

HIGH DEFINITION TELEVISION SETS ARE FULLY

COMPATIBLE WITH THIS PRODUCT AND MAY

CAUSE ARTIFACTS TO BE DISPLAYED IN THE

PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE

SCAN PICTURE PROBLEMS, IT IS RECOMMENDED

THAT THE USER SWITCH THE CONNECTION

TO THE “STANDARD DEFINITION” OUTPUT. IF

THERE ARE QUESTIONS REGARDING OUR

VIDEO MONITOR COMPATIBILITY WITH THIS

MODEL 525P AND 625P DVD PLAYER, PLEASE

CONTACT OUR CUSTOMER SERVICE CENTER.

This unit is compatible with the complete line of

YAMAHA products, including the projectors

DPX-1300, DPX-830 and the plasma monitor

PDM-4220.

TIPS: To return to the previous menu, press 1.

To clear the menu, press SETUP.

00EN_DVD-S659_U.book Page 28 Monday, June 12, 2006 4:19 PM

29 En

English

Setup Menu

Picture setting

This unit comes with three predefined sets

of picture color settings and one personal

setting that you can define yourself.

1 In “VIDEO SETUP PAGE”, press 3

/ 4 to

highlight [PICTURE SETTING], and then

press 2.

STANDARD

Select this for the standard picture setting.

BRIGHT

Select this to make the TV picture

brighter.

SOFT

Select this to make the TV picture softer.

PERSONAL

Select this to personalize your picture

color by adjusting the brightness, contrast,

tint and color (saturation).

2 Press 3

/ 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

3 If you select [PERSONAL] in step 1,

proceed to steps 4–7.

➜ The “PERSONAL PICTURE SETUP”

menu appears.

4 Press 3

/ 4 to select one of the following

options.

BRIGHTNESS

Increase the value to brighten the picture

or vice versa. Zero (0) is the average

brightness setting value.

CONTRAST

Increase the value to sharpen the picture

or vice versa. Zero (0) is the average

contrast setting value.

TINT

Increase the value to darken the picture or

vice versa. Zero (0) is the average tint

setting value.

COLOR

Increase the value to enhance the color in

your picture or vice versa. Zero (0) is the

average color setting value.

5 Press 1

/ 2 to adjust the setting that best

suits your personal preference.

6 Repeat steps 4–5

to adjust other color

features.

7 Press ENTER/OK to confirm your

selection.

Notes:

– All picture settings are not available for

HDMI output.

PERSONAL PICTURE SETUP

BRIGHTNESS

CONTRAST

TINT

COLOR

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

00EN_DVD-S659_U.book Page 29 Monday, June 12, 2006 4:19 PM

30 En

Setup Menu

Selecting the black level

If you set the TV type to NTSC, set the

black level shift to ON to improve the

color contrast during playback. The black

level setting has no effect if the TV type is

set to PAL.

1 In “VIDEO SETUP PAGE”, press 3

/ 4

to highlight [BLACK LEVEL], and then

press 2.

Select this to enhance the black level.

OFF

Select this for standard black level setting.

2 Press 3 / 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

Closed caption

Closed captions are data hidden in the

video signals of specific discs and are

invisible without the use of a special

decoder. The difference between subtitles

and captions is that subtitles are intended

for hearing persons and captions are for

the hearing impaired. Subtitles rarely show

all of the audio. For example, captions

show sound effects (e.g., “phone ringing”

and “footsteps”), while subtitles do not.

Before you select this function, please

ensure that the disc contains closed

caption information and your TV set also

supports this function.

1 In “VIDEO SETUP PAGE”, press 3

/ 4 to

highlight [CLOSED CAPTION], and then

press 2.

Select this to enable the closed caption

function.

OFF

Select this to disable the closed caption

function.

2 Press 3

/ 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

HDMI setup

When you connect this unit to an HDMI

compatible component via the HDMI jack,

select the following video output settings

depending on the connected component.

WIDE SCREEN FORMAT

Set the aspect ratio of the projected

images on the screen. This feature is only

available for HDMI video output.

SUPERWIDE

Select to display 4:3 image on the 16:9

screen with non-linear stretching (Center

position of screen is stretched less than

the side). This feature is not available when

the resolution is 480p or 570p.

4:3 PILLAR BOX

Select to display 4:3 image on the 16:9

screen without stretching.

OFF

No aspect ratio adjustment is made when

this option is selected.

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

00EN_DVD-S659_U.book Page 30 Monday, June 12, 2006 4:19 PM

31 En

English

Setup Menu

HDMI VIDEO

Enables you to adjust the resolution

depending on the monitor you are using.

Note:

– For settings other than [AUTO], HDMI

video output may not be display properly if

a resolution output setting is not supported

by the HDMI-compatible monitor you are

using. In that case, follow the steps below to

return to the initial setting:

1 Press OPEN/CLOSE

to open the

disc tray.

2 Press

3 Press ANGLE.

Do not perform this operation while playing

back a disc on this unit.

480P

480 progressive-scan video

576P

576 progressive-scan video

720P

720 progressive-scan video

1080I

1080 interlace video

AUTO

The resolution is automatically selected to

match the monitor you are using.

Notes:

– You cannot set [TV TYPE] when making

HDMI connections.

– When disconnecting the HDMI cable, the

setting of [TV TYPE] may be changed. If

Component video, S-video and Composite

video output does not display correctly, see

“Troubleshooting” on page 38 to set the

correct TV type again.

1 Press STOP (9) twice to stop playback

(if necessary), and then press SETUP.

2 Press 1

/ 2 to select “PREFERENCE

PAGE”.

3 Press ENTER/OK to confirm your

selection.

Preference setup menu

PREFERENCE PAGE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

VR LIST

MP3/JPEG NAV

DIVX SUBTITLE

PASSWORD

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

00EN_DVD-S659_U.book Page 31 Monday, June 12, 2006 4:19 PM

32 En

Setup Menu

Audio, subtitle and disc menu

These menus contain various language

options for the audio, subtitles and disc

menus recorded on the DVD-Video. For

details, see “Setting the audio, subtitle and

disc menu languages (DVD-Video only)”

on page 13.

Restricting playback with

parental control

Some DVDs may have a parental level

assigned to the complete disc or to certain

scenes on the disc. This feature lets you set

a playback limitation level.

The rating levels are from 1 to 8 and are

country dependent. You can prohibit

playback of certain discs that are not

suitable for your children or play certain

discs in alternative scenes.

1 In “PREFERENCE PAGE”, press 3

/ 4 to

highlight [PARENTAL], and then press 2.

2 Press 3

/ 4 to highlight a rating level for the

inserted disc, and then press ENTER/OK.

• To disable parental controls and have all

discs play, select [8 ADULT].

3 Use the numeric buttons (0-9) to enter

the six-digit password (see “Changing the

password” on page 35).

➜ DVDs that are rated above the level you

selected do not play unless you enter

your six-digit password.

Note:

– Some DVDs are not encoded with a rating

though the movie rating may be printed on

the disc cover. The rating level feature does

not work for such discs.

Playback of VR format

There are two ways to play back a disc in

VR (Video Recording) format: ORIGINAL

and PLAY LIST. This feature is not available

with non-VR format discs.

1 In “PREFERENCE PAGE”, press 3

/ 4 to

highlight [VR LIST], and then press 2.

ORIGINAL LIST

Select this to play the originally recorded

titles on the disc.

PLAY LIST

Select this to play the edited version of the

disc. This feature is only available when a

play list has been created.

2 Press 3

/ 4 to highlight a setting, and then

press ENTER/OK to confirm your

selection.

PREFERENCE PAGE

AUDIO 1 KID SAFE

SUBTITLE 2 G

DISC MENU 3 PG

PARENTAL 4 PG 13

VR LIST 5 PGR

MP3/JPEG NAV 6 R

DIVX SUBTITLE 7 NC 17

PASSWORD 8 ADULT

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

00EN_DVD-S659_U.book Page 32 Monday, June 12, 2006 4:19 PM

33 En

English

Setup Menu

To play back a disc in VR format

3 Press SETUP to close the setup menu.

4 Press PLAY (B) to begin to play back the

setting you selected.

Previewing VR format

5 During playback, press SCAN.

➜ A list appears on the TV screen.

6 Press 3

/ 4 to highlight either [TITLE

DIGEST] or [TITLE INTERVAL].

TITLE DIGEST

This function displays thumbnail pictures of

titles on the screen. Up to six thumbnail

pictures per page are displayed.

• In ORIGINAL LIST mode, the originally

recorded titles on the disc are

displayed.

• In PLAY LIST mode, every title in the

play list is displayed.

TITLE INTERVAL

This function is used to divide and display

the contents of each title being played back

in regular intervals, making it easy to

preview the recording. Up to six thumbnail

pictures per page are displayed.

• If the title being played back is short, the

TITLE DIGEST function is performed

instead.

7 Press ENTER/OK to confirm the

selection.

➜ Thumbnail pictures appear on the TV

screen.

8 Use

1 / 2/3 / 4 to select a title or use the

numeric buttons (0-9) to input the title

number.

• Press S / T to access the

previous/next page.

9 Press ENTER/OK to confirm the

selection.

To quit the preview function

• Use

1 / 2/3 / 4 to highlight [EXIT] and

press ENTER/OK.

To return to the preview menu

• Use

1 / 2/3 / 4 to highlight [MENU] and

press ENTER/OK.

SELECT DIGEST TYPE:

TITLE DIGEST

TITLE INTERVAL

(Example of 6 thumbnails in the display)

TYPE:TITLE

SELECT(01-06):- -

EXIT MENU NEXT

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

00EN_DVD-S659_U.book Page 33 Monday, June 12, 2006 4:19 PM

34 En

Setup Menu

MP3/JPEG menu

MP3/JPEG Navigator can be set only if the

disc was recorded with a menu. It allows

you to select different display menus for

easy navigation.

1 In “PREFERENCE PAGE”, press 3

/ 4 to

highlight [MP3/JPEG NAV], and then

press 2.

WITHOUT MENU

Select this to display all the files contained

in the MP3/Picture CD.

WITH MENU

Select this to display only the folder menu

of the MP3/Picture CD.

2 Press 3

/ 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

Displaying DivX external subtitle

files

The font sets listed below are available for

DivX external subtitle files. This setting

allows you to see the proper font set on-

screen to match the subtitle file.

1 In “PREFERENCE PAGE”, press 3

/ 4 to

highlight [DIVX SUBTITLE], and then

press 2.

2 Press 3

/ 4 to highlight one of the following

language groups.

GROUP1

Albanian (sq), Basque (eu), Catalan (ca),

Danish (da), Dutch (nl), English (en),

Faroese (fo), Finnish (fi), French (fr),

German (de), Icelandic (is), Irish (ga),

Italian (it), Norwegian (no),

Portuguese (pt), Rhaeto-Romanic (rm),

Scottish (gd), Spanish (es), Swedish (sv)

GROUP2

Albanian (sq), Croatian (hr), Czech (cs),

Hungarian (hu), Polish (pl), Romanian (ro),

Slovak (sk), Slovenian (sl)

GROUP3

Bulgarian (bg), Byelorussian (be),

Macedonian (mk), Russian (ru),

Serbian (sr), Ukrainian (uk)

GROUP4

Hebrew (iw), Yiddish (ji)

GROUP5:

Turkish (tr)

3 Select a group, and then press

ENTER/OK to confirm your selection.

Notes:

– Some discs cannot be played depending on

disc characteristics or recording conditions.

– Some external subtitle files may be

displayed incorrectly or not at all.

– For external subtitle files, the following

subtitle format filename extensions are

supported (note that these files are not

shown within the disc navigation menu):

.srt, .sub, .ssa, .smi

– The filename of the movie file has to be

repeated at the beginning of the filename

for the external subtitle file.

– The number of external subtitle files which

can be switched for the same movie file is

limited to a maximum of 10.

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

00EN_DVD-S659_U.book Page 34 Monday, June 12, 2006 4:19 PM

35 En

English

Setup Menu

Changing the password

The same password is used for both

parental control and disc lock. Enter your

six-digit password when prompted on the

screen. The default password is 000 000.

1 In “PREFERENCE PAGE”, press 3

/ 4 to

highlight [PASSWORD], and then press 2

to select [CHANGE].

2 Press ENTER/OK to enter the

“Password Change Page”.

3 Use the numeric buttons (0-9) to enter

your old six-digit password.

• When doing this for the first time, enter

“000 000”.

• If you forget your old six-digit

password, enter “000 000”.

4 Enter the new six-digit password.

5 Enter the new six-digit password again to

confirm the password.

6 Press ENTER/OK to confirm your new

password.

➜ The new six-digit password is now valid.

PBC (Playback control)

You can turn on or off PBC. This feature is

available only on Video CD 2.0 with the

playback control (PBC) feature. For details,

see “Playback control (PBC)” on page 18.

Resetting the system

Setting the DEFAULT function resets all

options and your personal settings to the

initial factory settings, except your password

for PARENTAL and DISC LOCK.

1 In “PREFERENCE PAGE”, press 3 / 4 to

highlight [DEFAULT], and then press 2 to

select [RESET].

2 Press ENTER/OK to confirm your selection.

➜ All settings are reset to the initial

factory settings.

PREFERENCE PAGE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

VR LIST

MP3/JPEG NAV

DIVX SUBTITLE

PASSWORD CHANGE

OLD PASSWORD

NEW PASSWORD

CONFIRM PWD

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

00EN_DVD-S659_U.book Page 35 Monday, June 12, 2006 4:19 PM

36 En

Language Codes

These codes can be used to select other languages. This does not affect the options

in “AUDIO”, “SUBTITLE” or “DISC MENU”.

Abkhazian 6566 German 6869

Afar 6565 Gikuyu; Kikuyu 7573

Afrikaans 6570 Greek, 6976

Albanian 8381 Guarani 7178

Amharic 6577 Gujarati 7185

Arabic 6582 Hausa 7265

Armenian 7289 Hebrew 7269

Assamese 6583 Herero 7290

Avestan 6569 Hindi 7273

Aymara 6589 Hiri Motu 7279

Azerbaijani 6590 Hungarian 7285

Bashkir 6665 Icelandic 7383

Basque 6985 Ido 7379

Belarusian 6669 Indonesian 7368

Bengali 6678 Interlingua (International) 7365

Bihari 6672 Interlingue 7369

Bislama 6673 Inuktitut 7385

Bokmål, Norwegian 7866 Inupiaq 7375

Bosnian 6683 Irish 7165

Breton 6682 Italian 7384

Bulgarian 6671 Japanese 7465

Burmese 7789 Javanese 7486

Castilian, Spanish 6983 Kalaallisut 7576

Catalan 6765 Kannada 7578

Chamorro 6772 Kashmiri 7583

Chechen 6769 Kazakh 7575

Chewa; Chichewa; Nyanja 7889 Khmer 7577

Chichewa; Chewa; Nyanja 7889 Kikuyu; Gikuyu 7573

Chinese 9072 Kinyarwanda 8287

Chuang; Zhuang 9065 Kirghiz 7589

Church Slavic; Slavonic; 6785 Komi 7586

Church Slavonic; Church 6785 Korean 7579

Chuvash 6786 Kuanyama; Kwanyama 7574

Cornish 7587 Kurdish 7585

Corsican 6779 Kwanyama; Kuanyama 7574

Croatian 7282 Lao 7679

Czech 6783 Latin 7665

Danish 6865 Latvian 7686

Dutch 7876 Letzeburgesch; 7666

Dzongkha 6890 Limburgan; Limburger; 7673

English 6978 Limburger; Limburgan; 7673

Esperanto 6979 Limburgish; Limburger; 7673

Estonian 6984 Lingala 7678

Faroese 7079 Lithuanian 7684

Fijian 7074 Luxembourgish; 7666

Finnish 7073 Macedonian 7775

French 7082 Malagasy 7771

Frisian 7089 Malay 7783

Gaelic; Scottish Gaelic 7168 Malayalam 7776

Gallegan 7176 Maltese 7784

Georgian 7565 Manx 7186

00EN_DVD-S659_U.book Page 36 Monday, June 12, 2006 4:19 PM

37 En

English

Language Codes

These codes can be used to select other languages. This does not affect the options

in “AUDIO”, “SUBTITLE” or “DISC MENU”.

Maori 7773 Sotho, Southem 8384

Marathi 7782 South Ndebele 7882

Marshallese 7772 Spanish; Castilian 6983

Moldavian 7779 Sundanese 8385

Mongolian 7778 Swahili 8387

Nauru 7865 Swati 8383

Navaho, Navajo 7886 Swedish 8386

Navajo; Navaho 7886 Tagalog 8476

Ndebele, North 7868 Tahitian 8489

Ndebele, South 7882 Tajik 8471

Ndonga 7871 Tamil 8465

Nepali 7869 Tatar 8484

Northern Sami 8369 Telugu 8469

North Ndebele 7868 Thai 8472

Norwegian 7879 Tibetan 6679

Norwegian Bokmål; Bokmål, 7866 Tigrinya 8473

Norwegian Nynorsk; 7878 Tonga (Tonga Islands) 8479

Nyanja; Chichewa; Chewa 7889 Tsonga 8483

Nynorsk, Norwegian; 7878 Tswana 8478

Occitan (post 1500); Proven 7967 Turkish 8482

Old Bulgarian; Old Slavonic; 6785 Turkmen 8475

Old Church Slavonic; Old 6785 Twi 8487

Old Slavonic; Church 6785 Uighur 8571

Oriya 7982 Ukrainian 8575

Oromo 7977 Urdu 8582

Ossetian; Ossetic 7983 Uzbek 8590

Ossetic; Ossetian 7983 Vietnamese 8673

Pali 8073 Volapük 8679

Panjabi 8065 Walloon 8765

Persian 7065 Welsh 6789

Polish 8076 Wolof 8779

Portuguese 8084 Xhosa 8872

Provençal; Occitan (post) 7967 Yiddish 8973

Pushto 8083 Yoruba 8979

Quechua 8185 Zhuang; Chuang 9065

Raeto-Romance 8277 Zulu 9085

Romanian 8279

Rundi 8278

Russian 8285

Samoan 8377

Sango 8371

Sanskrit 8365

Sardinian 8367

Scottish Gaelic; Gaelic 7168

Serbian 8382

Shona 8378

Sindhi 8368

Sinhalese 8373

Slovak 8375

Slovenian 8376

Somali 8379

00EN_DVD-S659_U.book Page 37 Monday, June 12, 2006 4:19 PM

38 En

Troubleshooting

Refer to the chart below when this unit does not function properly. If the problem

you are experiencing is not listed below or if the instruction below does not help,

set this unit to the standby mode, disconnect the power cord, and contact the

nearest authorized YAMAHA dealer or service center.

Problem Solution

No power – Connect the AC power cord properly.

– Press STANDBY/ON on the front panel to turn on the power.

No picture – Refer to the manual supplied with your TV for correct Video In

channel selection. Change the TV channel until you see the DVD

screen.

– Turn on your TV.

– Check the video connection.

No picture is displayed

when you make HDMI

connections (using the

HDMI jacks)

– Follow the steps below to change the [HDMI VIDEO] to [AUTO];

1. Press OPEN/CLOSE (/) on the front panel or press and hold

STOP (9) on the remote control to open the disc tray.

2. Press 1 on the remote control.

3. Press ANGLE on the remote control.

No picture is displayed

when you do not use

progressive scan

connections (using the

component video jacks)

– Follow the steps below to turn off the progressive scan;

1. Press OPEN/CLOSE (/) on the front panel or press and hold

STOP (9) on the remote control to open the disc tray.

2. Press 1 on the remote control.

3. Press MUTE on the remote control to deactivate progressive scan.

This unit is set to Component/Interlaced video.

Completely distorted

picture or black/white

picture or no picture

– Check that the disc is compatible with this unit (see “Notes about

discs/content format” on page 3).

– Check that the TV Type of this unit is set to match that of the disc

and your TV (see “Setting a color system for your TV” on page 11).

Follow the steps below to change the setting of [TV TYPE].

1. Press OPEN/CLOSE (/) on the front panel or press and hold

STOP (9) on the remote control to open the disc tray.

2. Press 2 on the remote control.

3. Press AUDIO on the remote control.

Distorted picture – Occasionally, a small amount of picture distortion may appear

depending on the disc being played back. This is not a malfunction.

The screen size looks

unnatural, or the caption is

displayed only partially on

the TV monitor or is not

displayed at all

– Check that the TV setting of this unit matches the screen size of your

TV (see “Setting the TV display” on page 27).

– Change the screen size and the aspect ratio of your TV.

No sound or distorted

sound

– Adjust the volume.

– Check that the speakers are connected correctly.

– For MP3/WMA files, check that the sampling rate and bit rate are compatible

with this unit (see “Notes about discs/content format” on page 3).

00EN_DVD-S659_U.book Page 38 Monday, June 12, 2006 4:19 PM

39 En

English

Troubleshooting

No audio at digital output – Check the digital connections.

– If you are playing a DTS source, check that your receiver can decode

DTS and “DIGITAL OUTPUT” is set to “ALL” (see page 25).

– If you are playing an MPEG-2 source, check that your receiver can

decode MPEG-2. Otherwise, make sure “DIGITAL OUTPUT” is set

to “PCM ONLY” (see page 25).

– Check that the audio format of the selected audio language matches

your receiver capabilities.

Disc does not play – The CD-R/RW, DVD+R/RW/R DL and DVD-R/RW/R DL must be

finalized.

– Check that the disc label is facing up.

– Check that the disc is defective by trying another disc.

– If you have recorded a JPEG, MP3 or WMA disc yourself, check that

your disc contains at least 10 JPEG picture files or 5 MP3/WMA music

tracks.

– For MP3/WMA files, check that the sampling rate and bit rate are

compatible. For JPEG files, check that the resolution is compatible

(see “Notes about discs/content format” on page 3).

– Check the region code (see “Region codes” on page 3).

Picture freezes

momentarily during

playback

– Check the disc for fingerprints/scratches and clean it with a soft cloth

wiping from center to edge.

This unit does not respond

to the remote control

– Aim the remote control directly at the remote control sensor on the

front panel.

– Reduce the distance of the remote control from this unit.

– Replace the batteries in the remote control.

– Reinsert the batteries with their polarities (+/– signs) as indicated.

Buttons do not work – To completely reset this unit, unplug the AC cord from the AC outlet

for 5-10 seconds.

This unit does not respond

to some operating

commands during playback

– Operations may not be permitted by the disc. Refer to the

instructions of the disc jacket.

This unit cannot read CDs/

DVDs

– Use a commonly available CD/DVD lens cleaner to clean the lens

before sending this unit for repair.

Menu items cannot be

selected

– Press STOP (9) twice on the remote control before selecting Setup

Menu.

– Depending on the disc availability, some menu items cannot be

selected.

No sound during DivX

movies playback

– The audio code may not be supported by this unit.

Problem Solution

00EN_DVD-S659_U.book Page 39 Monday, June 12, 2006 4:19 PM

40 En

Glossary

Analog: Sound that has not been turned into

numbers. Analog sound varies, while digital

sound has speciﬁc numerical values. These jacks

send audio through two channels, the left and

right.

Aspect ratio: The ratio of vertical and

horizontal sizes of a displayed image. The

horizontal vs. vertical ratio of conventional TVs.

is 4:3, and that of widescreens is 16:9.

Audio output jacks: Jacks on the back of the

DVD System that send audio to another system

(TV, Stereo, etc.).

Bit rate:

The amount of data used to hold a given

length of music; measured in kilobits per seconds,

or kbps. Or, the speed at which you record.

Generally, the higher the bit rate, or the higher the

recording speed, the better the sound quality.

However, higher bit rates use more space on a Disc.

Chapter: Sections of a picture or a music piece

on a DVD that are smaller than titles. A title is

composed of several chapters. Each chapter is

assigned a chapter number enabling you to locate

the chapter you want.

Component video output jacks: Jacks on the

back of the DVD System that send high-quality

video to a TV that has Component Video In jacks

(R/G/B, Y/Pb/Pr, etc.).

Disc menu: A screen display prepared for

allowing selection of images, sounds, subtitles,

multi-angles, etc. recorded on a DVD.

Digital: Sound that has been converted into

numerical values. Digital sound is available when

you use the digital audio output jacks. These

jacks send audio through multiple channels,

instead of just two channels as analog does.

DivX:

DivX is a popular media technology

created by DivX, Inc. DivX media ﬁles contain

highly compressed video with high visual quality

that maintains a relatively small ﬁle size. DivX ﬁles

can also include advanced media features like

menus, subtitles, and alternate audio tracks. Many

DivX media ﬁles are available for download online,

and you can create your own using your personal

content and easy-to-use tools from DivX.com.

DivX Ultra: DivX Ultra Certiﬁed products

provide enhanced playback of advanced media

features supported by the DivX Media Format.

Key features include interactive video menus,

subtitles, alternate audio tracks, video tags and

chapter points.

DMF (DivX Media Format): The DivX Media

Format supports advanced media features,

adding controls for an interactive media

experience: interactive video menus, chapter

points, multi-language subtitles and alternate

audio tracks.

Dolby Digital:

A surround sound system

developed by Dolby Laboratories containing up to

six channels of digital audio (front left and right,

surround left and right, center and subwoofer).

DTS: Digital Theatre Systems. This is a surround

sound system, but it is different from Dolby

Digital. The formats were developed by different

companies.

HDMI: HDMI (High-Deﬁnition Multimedia

Interface) is the ﬁrst industry-supported,

uncompressed, all-digital A/V (audio/video)

interface. Providing an interface between any A/V

source (such as a set-top box or A/V receiver)

and an audio/video monitor (such as a digital

television - DTV), HDMI supports standard,

enhanced or high-deﬁnition video as well as

multi-channel digital audio using a single cable.

HDMI transmits all ATSC HDTV standards and

supports 8-channel digital audio, with bandwidth

to spare to accommodate future enhancements

and requirements.

When used in combination with HDCP (High-

bandwidth Digital Content Protection), HDMI

provides a secure audio/video interface that

meets the security requirements of content

providers and system operations. For further

information on HDMI, visit the HDMI website at

“www.hdmi.org/”

00EN_DVD-S659_U.book Page 40 Monday, June 12, 2006 4:19 PM

41 En

English

Glossary

HDCP: HDCP (High-bandwidth Digital Content

Protection) developed by Intel corporation, is a

method to encrypt digital video and audio data

for purpose of content protection. For further

information on HDCP, visit the HDCP website at

“www.digital-cp.com”.

Interactive menu: Interactive video menus

offer unprecedented convenience and control so

you can quickly navigate between various scenes

or bonus features, and select from audio track

and subtitle options.

JPEG: A very common digital still picture

format. A still-picture data compression system

proposed by the Joint Photographic Expert

Group, which features small decrease in image

quality in spite of its high compression ratio.

MP3:

A ﬁle format with a sound data

compression system. “MP3” is the abbreviation

of Motion Picture Experts Group 1 (or MPEG-1)

Audio Layer 3. By using MP3 format, one CD-R

or CD-RW can contain about 10 times as much

data volume as a regular CD can.

Parental control: A function of the DVD to

limit playback of the disc by the age of the users

according to the limitation level in each country.

The limitation varies from disc to disc; when it is

activated, playback will be prohibited if the

software’s level is higher than the user-set level.

PCM (Pulse Code Modulation): A system for

converting analog sound signal to digital signal for

later processing, with no data compression used

in conversion.

Playback control (PBC): Refers to the signal

recorded on video CDs or SVCDs for

controlling reproduction. By using menu screens

recorded on a Video CD or SVCD that supports

PBC, you can enjoy interactive-type software as

well as software having a search function.

Pla

y list:

A list of selected titles to be played back

in a speciﬁc order. This option is only available

with VR format and must be created beforehand.

Progressive scan: It displays all the horizontal

lines of a picture at one time, as a signal frame.

This system can convert the interlaced video

from DVD into progressive format for

connection to a progressive display. It

dramatically increases the vertical resolution.

Region code: A system for allowing discs to be

played back only in the region designated

beforehand. This unit will only play discs that

have compatible region codes. You can ﬁnd the

region code of your unit by looking on the

product label. Some discs are compatible with

more than one region (or ALL regions).

S-video:

Produces a clear picture by sending

separate signals for the luminance and the color.

You can use S-video only if your TV has S-video

input jack.

Surround: A system for creating realistic three

dimensional sound ﬁelds full of realism by

arranging multiple speakers around the listener.

Title: The longest section of a picture or music

feature on DVD, music, etc., in video software,

or the entire album in audio software. Each title

is assigned a title number enabling you to locate

the title you want.

Video output jack: Jack on the back of the

DVD System that sends video to a TV.

VR (Video Recording) format: A format

which enables you to create a DVD disc that can

be extensively re-edited.

00EN_DVD-S659_U.book Page 41 Monday, June 12, 2006 4:19 PM

42 En

Specifications

PLAYBACK SYSTEM

DVD Video

Video CD & SVCD

PICTURE CD

CD-R, CD-RW

DVD+R, DVD+RW, DVD+R DL

DVD-R, DVD-RW, DVD-R DL

VIDEO PERFORMANCE

Video (CVBS) Output 1 Vpp into 75 ohm

S-Video output Y: 1 Vpp into 75 ohm

C: 0.3 Vpp into 75 ohm

Component video output Y: 1 Vpp into 75 ohm

B PR: 0.7 Vpp into

75 ohm

AUDIO FORMAT

Digital Dolby Digital/DTS/MPEG

Compressed Digital

PCM 16, 20, 24 bits

fs, 44.1, 48, 96 kHz

MP3 (ISO 9660) 96, 128, 256, 320 kbps

fs, 32, 44.1, 48 kHz

WMA 64 kbps–192 kbps

fs, 44.1, 48 kHz

Analog Sound Stereo

AUDIO PERFORMANCE

DA Converter 24 bit

Signal-Noise (1 kHz) 105 dB

Dynamic range (1 kHz) 97 dB

DVD fs 96 kHz 2 Hz-44 kHz

fs 48 kHz 2 Hz-22 kHz

SVCD fs 48 kHz 2 Hz-22 kHz

fs 44.1 kHz 2 Hz-20 kHz

CD/VCD fs 44.1 kHz 2 Hz-20 kHz

Distortion and Noise (1 kHz) 0.0035%

TV STANDARD (PAL/50 Hz) (NTSC/60 Hz)

Number of lines 625 525

Playback Multistandard (PAL/NTSC)

CONNECTIONS

HDMI TYPE A x 1

Y Output Cinch (green)

B Output Cinch (blue)

R Output Cinch (red)

S-Video Output Mini DIN, 4 pins

Video Output Cinch

Audio Output (L+R) Cinch

Digital Output 1 coaxial

IEC60958 for CDDA/LPCM

IEC61937 for MPEG 1/2, Dolby

Digital and DTS

CABINET

Dimensions (w x d x h) 435 x 310 x 51 mm

Weight Approx. 2.6 Kg

POWER SUPPLY

Power inlet 120 V, 60 Hz

Power usage Approx. 14 W

Power usage standby < 1 W

Specifications are subject to change without

prior notice.

00EN_DVD-S659_U.book Page 42 Monday, June 12, 2006 4:19 PM

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

2006

DVD-S659

HDMI

DVD PLAYER

LECTEUR DE DVD

DVD-S659

Printed in China 3139 245 22231

00cv_DVD-S659_U.fm Page 1 Tuesday, May 2, 2006 9:22 AM

Yamaha DVD-S659 Manual de usuario

Marca: Yamaha

Modelo: DVD-S659

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Descargar PDF

informe

En otros idiomas

français: Yamaha DVD-S659 Manuel utilisateur
italiano: Yamaha DVD-S659 Manuale utente
English: Yamaha DVD-S659 User manual
Deutsch: Yamaha DVD-S659 Benutzerhandbuch
русский: Yamaha DVD-S659 Руководство пользователя
Nederlands: Yamaha DVD-S659 Handleiding
português: Yamaha DVD-S659 Manual do usuário
dansk: Yamaha DVD-S659 Brugermanual
polski: Yamaha DVD-S659 Instrukcja obsługi
čeština: Yamaha DVD-S659 Uživatelský manuál
svenska: Yamaha DVD-S659 Användarmanual
Türkçe: Yamaha DVD-S659 Kullanım kılavuzu
română: Yamaha DVD-S659 Manual de utilizare

Yamaha DVD-S659 Manual de usuario

Yamaha DVD-S659 Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos