Transcripción de documentos

UA DVD AUDIO/VIDEO SA-CD PLAYER LECTEUR DE DVD AUDIO/VIDEO SA-CD DVD-S657 OWNER’S MANUAL MODE D’EMPLOI ©2005 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA Printed All rights reserved. in China 3139 246 15072  IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 1 Read Instructions — All the safety and operating instructions should be read before the product is operated. 2 Retain Instructions — The safety and operating instructions should be retained for future reference. 3 Heed Warnings — All warnings on the product and in the operating instructions should be adhered to. 4 Follow Instructions — All operating and use instructions should be followed. 5 Cleaning — Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6 Attachments — Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7 Water and Moisture — Do not use this product near water — for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. 8 Accessories — Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product . Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. 9 A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 10 Ventilation — Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. 11 Power Sources — This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. i 12 Grounding or Polarization — This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 13 Power-Cord Protection — Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 14 Lightning — For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 15 Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16 Overloading — Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 17 Object and Liquid Entry — Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 18 Servicing — Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19 Damage Requiring Service — Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service. 20 Replacement Parts — When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 21 Safety Check — Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 22 Wall or Ceiling Mounting — The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. 23 Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.  FCC INFORMATION (for US customers) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the product “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe Ave. Buena Park, CA90622. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion - and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association's Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels. For Customer Use: Read carefully the information located at the bottom of the player (U.S.A. model) and enter below the Serial No. Retain this information for future reference. Model No. Serial No. __________________________ FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003. CAUTION: INVISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. DANGER: INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO THE BEAM POUR LES CONSOMMATEURS CANADIENS Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ii  CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 2 3 4 5 6 7 8 9 10 11 12 13 iii To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moisture, or cold. In a cabinet, allow about 2.5cm (1 inch) of free space all around this unit for adequate ventilation. Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. Do not expose this unit to sudden temperature changes from cold to hot, nor locate this unit in an environment with high humidity (i.e., a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. Avoid installing this unit in a location where foreign objects may fall onto this unit or where this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: – Other components, as they may cause damage and/or discoloration on the surface of this unit. – Burning objects (i.e., candles), as they may cause fire, damage to this unit, and/or personal injury. – Containers with liquid in them, as they may fall, spilling the liquid and causing an electrical shock to the user and/or damage to this unit. Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury. Do not plug in this unit to a wall outlet until all connections are complete. Do not operate this unit upside-down. It may overheat, possibly causing damage. Do not use excessive force on switches, knobs and/or cords. When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord. Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. Use only the voltage specified on this unit. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than as specified. To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm. 14 Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reason. 15 When not planning to use this unit for long periods of time (i.e., vacation), disconnect the AC power plug from the wall outlet. 16 Be sure to read the “Troubleshooting” section on common operating errors before concluding that this unit is faulty. 17 Before moving this unit, press STANDBY/ON to set the unit in standby mode, then disconnect the AC power plug from the wall outlet. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. When playing DTS encoded CDs, excessive noise will be heard from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the player are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1channel DTS Digital Surround™ decoder system must be connected to the digital output of the player. LASER SAFETY This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. (WARNING LOCATION: INSIDE ON LASER COVERSHIELD OR THE BACKPLATE OF SET) LASER Type Wave length Output Power Beam divergence Semiconductor laser GaAlAs 650 nm (DVD) 780 nm (VCD/CD) 7 mW (DVD) 10 mW (VCD/CD) 60 degree DANGER This unit emits visible laser radiation when open. Avoid direct eye exposure to beam. When this unit is plugged into a wall outlet, do not place your eyes close to the opening of the disc tray and other openings or look inside.  Contents Disc Operations Region Codes..............................................................3 Supplied accessories ..................................................3 Notes about discs ......................................................3 Cleaning discs..............................................................3 Patent information .....................................................3 Basic Playback........................................................... 14 General Operation.................................................. 14 Pausing playback.................................................................14 Selecting track/chapter ...................................................14 Searching backward/forward.......................................14 Stopping playback..............................................................14 Selecting various repeat/shuffle functions.......... 15 Repeat......................................................................................15 Repeating a section within a chapter/track.........15 Shuffle.......................................................................................15 Operations for video playback (DVD/VCD/SVCD) .... 15 Using the Disc Menu .......................................................15 Zooming in............................................................................16 Resuming playback from the last stopped point..........................................................................................16 On-Screen Display (OSD)...........................................16 Special DVD Features ............................................ 17 Playing a Title .......................................................................17 Camera Angle......................................................................17 Audio........................................................................................17 Subtitles...................................................................................17 Special VCD & SVCD Features............................ 18 Playback Control (PBC).................................................18 Preview Function ...............................................................18 DVD-Audio Features.............................................. 19 Changing pages ...................................................................19 Playing bonus groups.......................................................19 DVD-Video mode ............................................................19 SA-CD (Super Audio CD) .................................... 20 Playing a disc.........................................................................20 Changing the SA-CD playback area and layer.....20 Playing MP3/DivX/JPEG/Kodak Picture CD......... 21 General Operation ...........................................................21 Selecting a folder and track/file..................................21 Repeat......................................................................................21 Special picture disc features.................................. 22 Preview Function (JPEG) ...............................................22 Zoom picture.......................................................................22 Playback with multi-angles............................................22 Scan Effect..............................................................................22 Playing MP3 music and JPEG picture simultaneously .....................................................................22 Functional Overview Front Panel ..................................................................4 Rear Panel ....................................................................5 Remote Control.........................................................6 Preparation General Notes on connections ..............................7 Digital Connections ...................................................7 Analog Connections ..................................................8 6ch discrete jacks..................................................................8 MIXED 2CH jacks................................................................8 Video Connections ....................................................9 S-Video terminal <A>.......................................................9 Composite Video terminal <B>..................................9 Component Video terminal <C> ..............................9 Getting Started Inserting batteries into the Remote Control ... 10 Using the remote control .............................................10 Turning on the power............................................ 10 Selecting the color system that corresponds to your TV ..................................................................... 10 Setting language preference .................................. 11 Setting the OSD Language...........................................11 Setting the Audio, Subtitle and Disc menu language...................................................................................12 Setting Speaker Channels...................................... 12 1 English Introduction  Contents Setup Menu General Setup Menu............................................... 23 Selecting DVD-Audio/Video mode ........................23 Locking/Unlocking the disc for viewing.................23 Dimming player’s front panel display .....................23 Programming disc tracks (not for Picture CD/MP3)................................................................................24 OSD Language....................................................................24 Screen Saver.........................................................................24 Sleep Timer...........................................................................25 DivX® VOD registration code..................................25 Audio Setup Menu .................................................. 25 Setting the analog output..............................................25 Setting the Digital output..............................................26 Speaker Setup......................................................................26 CD Upsampling ..................................................................26 Night Mode...........................................................................27 Video Setup Menu................................................... 27 TV Type ..................................................................................27 Setting the TV Display....................................................27 Progressive ............................................................................28 Picture Setting......................................................................28 Selecting the black level (U.S.A. model only)....29 Closed Caption (U.S.A. model only)......................29 Preference Setup Menu ......................................... 30 Audio, Subtitle, Disc Menu ..........................................30 Restricting playback by Parental Control .............30 PBC (Playback Control).................................................30 MP3/JPEG Menu.................................................................31 Playback of VR Format ...................................................31 Changing the Password..................................................32 Restoring to original settings .......................................32 2 Language Codes .................... 33 Troubleshooting.................... 35 Glossary ................................. 37 Specifications......................... 39  02_EN_body_DVD-S657_UA.fm Page 3 Thursday, April 14, 2005 8:39 PM Introduction Region Codes DVD discs must be labeled for ALL regions, Region 1 (U.S.A model) or Region 4 (Australia model) in order to play on this Player. You cannot play Discs that are labeled for other regions. ALL 1 4 Supplied accessories – Remote control – Batteries (two AA size) for remote control – Audio pin cable – Video pin cable – Owner’s Manual – Be sure to use only CD-R and CD-RW discs made by reliable manufacturers. – Do not use any non standard shaped discs (heart, etc.). – Do not use disc with tape, stickers, or paste on it. Doing so may damage the unit. – Do not use a disc which has been printed on its surface by a commercially available label printer. Cleaning discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records. Patent information Notes about discs – This unit is designed for use with DVD video, Video CD, Super video CD, DVD-Audio, Super Audio CD (SA-CD), Audio CD, CD-R, CD-RW, DVD+RW, DVD+R, DVD-R, DVD-RW and DVDRW (VR format). This unit can play: – MP3, picture (Kodak, JPEG) files on CDR(W). – JPEG/ISO 9660 format – Maximum 30 characters display. – DivX® disc on CD-R[W]/DVD+R[W]/ DVD-R[W] (3.11, 4.x and 5.x) – Dual layer DVDs – CD-R, CD-RW, DVD+R/RW, DVD-R/ RW and DVD-RW (VR format) cannot be played unless finalized. – Some discs cannot be played depending on the recording conditions such as PC environment and application software. The characteristics and condition of the discs; materials, scratches, curvature, etc., may result in failure. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc and are used under license. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 3 English Thank you for purchasing this unit. This Owner’s Manual explains the basic operation of this unit.  Functional Overview Front Panel 9 STOP – stops playback STANDBY/ON – turns on this unit or sets it to the standby mode ; PAUSE – pauses playback B PLAY – starts playback Disc tray DVD-AUDIO indicator – lights up when the player detects DVD-Audio signals SA-CD indicator – lights up when the player detects SA-CD signals PROGRESSIVE indicator – lights up when the unit enters Progressive mode / OPEN/CLOSE – opens or closes the disc tray Front panel display – shows information about the operational status of the unit A.DRCT – lights up when you enter the AUDIO DIRECT mode by pressing the AUDIO DIRECT button on the remote control during audio disc playback ML.CH – lights up when you play multichannel audio source D.MIX – lights up when you play the discs that allow down mixing of the multichannel audio sources A.DRCT 4 ML.CH D.MIX  Functional Overview AC Power Cord – connects to a standard AC outlet COAXIAL digital audio output – connects to a digital (coaxial) input of your AV receiver or stereo system S VIDEO output – connects to an S-Video input on your AV receiver OPTICAL digital audio output – connects to a digital (optical) input on your AV receiver or stereo system English Rear Panel COMPONENT video outputs – connect to an AV receiver with Y PB/CB PR/CR inputs VIDEO output (composite video out) – connects to a video input on your AV receiver MIXED 2CH output – connect to the audio jacks on your AV receiver or stereo system 6ch discrete output – connect to the 6ch input jacks on your AV receiver Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 5  Functional Overview Remote Control AUDIO DIRECT – switches video output on and off during audio disc playback B/ | – turns on this player or sets it to the standby mode PAGE – turns the pages of DVD-Audio still pictures numeric buttons – selects numbered items in the currently displayed menu DIMMER – use to select from 3 different brightness levels for the display ON SCREEN – accesses or clears the player’s On Screen Display menu SOUND MODE – selects a sound mode: Stereo, Virtual Surround or Multi-channel – changes the SA-CD playback area TOP MENU/RETURN – displays the top-level disc menu (DVD) – moves back to the previous menu (VCD) MENU – accesses the disc’s menu (for DVDs) – switches PBC on/off (for VCDs) 1 2 3 4 – (left/right/up/down) selects an item in the currently displayed menu SETUP – accesses or clears the player’s setup menu T – searches forward* – moves to the next chapter or track SUBTITLE – selects the language for subtitles ANGLE – selects the DVD camera angle ZOOM – enlarges the video image AUDIO – selects the audio language or format selector – changes the Hybrid SA-CD playback layer ENTER/OK – acknowledges the menu selection REPEAT – repeats the chapter, track, title ordisc S – searches backward* – moves to the previous chapter or track A-B – repeats a specific segment STOP ( 9 ) – stops playback PLAY ( B ) – starts playback PAUSE ( ; ) – pauses playback temporarily – frame-by-frame playback * Press and hold button for about two seconds. 6 SHUFFLE – plays tracks in random order SCAN – plays the first 6 seconds or less of each track/chapter on the disc  Preparation Never make or change connections with the power switched on. • Depending on the equipment you wish to connect, there are various ways you could connect this unit. Possible connections are shown in the following drawings. • Please refer to the manuals of other equipment as necessary to make the best connections. • Do not connect this unit via your VCR. The video quality could be distorted by the copy protection system. • Do not connect this unit’s audio out jack to the phono in jack of your audio system. Note: – If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. Make sure to select the appropriate audio format at menu screen included on the disc. Pressing AUDIO once or more may change not only audio languages but also audio formats, and the selected format appears for several seconds on the status window. – SA-CD audio signals are not output from the DIGITAL OUT jacks. – If you wish to enjoy Dolby Digital, DTS, and MPEG format, you must connect this player to an AV receiver that supports these formats. Digital Connections This unit has COAXIAL and OPTICAL digital out jacks. Connect one or both of them to your AV receiver equipped with Dolby digital, DTS, or MPEG decoder using a commercially available cable. O C COAXIAL IN AV receiver OPTICAL IN Subwoofer Left front speaker Left surround speaker Center speaker Surround back speaker Right front speaker Right surround speaker You will need to set this unit’s digital output to ALL (see page 26 “DIGITAL OUTPUT”). 7 English General Notes on connections  Preparation MIXED 2CH jacks Analog Connections This player has two types of analog output jacks. 6ch discrete jacks To reproduce multi-channel Super Audio CD and DVD-Audio, connect these jacks to your AV receiver’s multi channel input jacks using commercially available audio pin cables. Use the audio/video cable supplied with this player to connect the L (left) and R (right) jacks to the corresponding input jacks of your audio component, such as a stereo amplifier. You can connect a subwoofer to the SUBWOOFER jack. R Stereo amplifier L R 1 R FRONT R L CENTER SUBWOOFER SURROUND R L AV receiver Left speaker Subwoofer Left front speaker Left surround speaker 8 Center speaker Surround back speaker Right front speaker Right surround speaker Right speaker L CD/DVD L Subwoofer  Preparation If your AV receiver has video output jacks, connect your receiver (and then to your TV) so that you can use one TV for several different video sources (LD, VCR, etc.) by simply switching the input source selector of your receiver. The player has three types of video output jacks. Use one of them in accordance with the input jacks of the equipment to be connected. S-Video terminal <A> English Video Connections S (separate) video connection achieves a clearer picture than composite video connection by separating color and luminance when transmitting signals. Use commercially available S-video cable. Receiver (and TV) with S-video input is required. Composite Video terminal <B> Use the supplied video pin cable when connecting the player to an AV receiver. Component Video terminal <C> Video pin cable <A> V <B> <C> S Y S VIDEO INPUT VIDEO PBCB PRCR COMPONENT VIDEO IN AV receiver VIDEO OUT COMPONENT VIDEO OUT S VIDEO OUT VIDEO IN COMPONENT VIDEO IN S VIDEO IN Component video connection achieves high fidelity in reproducing colors (better performance than S-video connection), separating video signal into luminance (Y, terminal color-coded as green), and color difference (Pb, blue/Pr, red). Use commercially available coaxial cables. Receiver (and TV) with component input is required. Observe the color of each jack when connecting. If your receiver does not have component output jacks, connecting the player’s component output directly to your TV’s component input can reproduce better video image. 9  Getting Started Step1: Inserting batteries into the Remote Control 3 1 2 1 Open the battery compartment. 2 Insert the supplied two batteries type R06 or AA, following the indications (+ –) inside the compartment. 3 Close the cover. Using the remote control Remote control sensor Point the remote control at the sensor, within approximately 6 m (20 feet) of the unit. 30° Step2: Turning on the power 1 Connect the AC power cord to the power outlet. 2 Turn on the TV and your AV receiver. 3 Select the appropriate input source at the AV receiver that was used to connect to this unit. Refer to the equipment owner’s manual for details. 4 Turn this unit on. 5 Set the TV to the correct Video IN channel (eg. EXT1, EXT2, AV1, AV2, AUDIO/ VIDEO, etc. Refer to your TV owner’s manual for details). ➜ The front display lights up and the default screen appears on the TV. Step3: Selecting the color system that corresponds to your TV This DVD Player is compatible with both NTSC and PAL. Select the color system that matches your TV. 30° VIDEO SETUP PAGE TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING BLACK LEVEL CLOSED CAPTION Handling the remote control • Do not spill water or other liquids on the remote control. • Do not drop the remote control. • Do not leave or store the remote control in the following types of conditions: – high humidity such as near a bath – high temperature such as near a heater or stove – extremely low temperature – dusty places 10 PAL NTSC MULTI 1 Press SETUP. 2 Press 2 repeatedly to select [VIDEO SETUP PAGE]. 3 Press 34 to highlight [TV TYPE], then press 2.  Getting Started Notes: – Before changing the current TV Standard setting, ensure that your TV supports the ‘selected TV Type’ system. – If there is not a proper picture on your TV, wait for 15 seconds for auto recover. CHANGING NTSC TO PAL 1. ENSURE THAT YOUR TV SYSTEM SUPPORTS PAL STANDARD. 2. IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVER. OK TIPS: Cancel Step4: Setting language preference You can select your own preferred language settings.This DVD Player will automatically switch to the language for you whenever you load a disc. If the language selected is not available on the disc, the disc’s default language will be used instead. The OSD language in the system menu will remain once selected. Setting the OSD Language GENERAL SETUP PAGE DVD-AUDIO DISC LOCK DISPLAY DIM PROGRAM OSD LANGUAGE SCREEN SAVER SLEEP DIVX(R) VOD CODE ENGLISH ESPAÑOL FRANÇAIS 1 Press SETUP. 2 Press 1 2 to select [GENERAL SETUP PAGE]. 3 Press 34 to highlight [OSD LANGUAGE], then press 2. 4 Press 34 to select a language and press ENTER/OK. To return to the previous menu, press 1. To remove the menu, press SETUP. 11 English 4 Press 34 to highlight one of the options below: PAL Select this if the connected TV is PAL system. It will change the video signal of an NTSC disc and output in PAL format. NTSC Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc and output in NTSC format. MULTI Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc. 5 Select an item and press ENTER/OK.  Getting Started Setting the Audio, Subtitle and Disc menu language PREFERENCE PAGE AUDIO SUBTITLE DISC MENU PARENTAL PBC MP3/JPEG NAV VR LIST PASSWORD ENGLISH CHINESE (SIMP) JAPANESE FRENCH SPANISH PORTUGUESE POLISH ITALIAN 1 Press STOP ( 9 ) twice, then press SETUP. 2 Press 2 repeatedly to select [PREFERENCE PAGE]. 3 Press 34 to highlight one of the options below at a time, then press 2. – ‘AUDIO’ (disc’s soundtrack) – ‘SUBTITLE’ (disc’s subtitles) – ‘DISC MENU’ (disc’s menu) 4 Press 34 to select a language and press ENTER/OK. If the language you want is not in the list, then select [OTHERS], then use the numeric buttons on the remote to enter the 4-digit language code (see page 33 “Language Codes”) and press ENTER/OK. 5 Repeat steps 3–4 for other options settings. Step 5: Setting Speaker Channels You can adjust the delay times (for center and surround speakers only) and the volume level for individual speakers. These adjustments let you optimize the sound of your system to best suit your surroundings and setup. IMPORTANT! Speaker settings are only available for multi-channel audio output. 1 Press SETUP. 2 Press 2 repeatedly to select [AUDIO SETUP PAGE]. 3 Press 34 to highlight [SPEAKER SETUP], then press 2. AUDIO SETUP PAGE ANALOG OUTPUT DIGITAL AUDIO SPEAKER SETUP CD UPSAMPLING NIGHT MODE SPEAKER SETUP PAGE FRONT SPEAKER LARGE CENTER SPEAKER SMALL SURROUND SP SUBWOOFER SPEAKERS VOLUME SPEAKERS DELAY 4 Enter a submenu by pressing 2. 5 Press 34 to highlight one of the options below, then press 2. TIPS: 12 To return to the previous menu, press 1. To remove the menu, press SETUP.  Getting Started [SUBWOOFER] ON Select when a subwoofer is connected. OFF Select when no subwoofer is connected. [SPEAKERS VOLUME] Volume level setting for individual speakers (–6 dB ~ +6 dB). [SPEAKERS DELAY] Delay time settings in relation to the listening position/distance for center and surround speakers (0 MS~15 MS). SPEAKERS DELAY SETUP CENTER 0 MS SURROUND L SURROUND R 0 MS 0 MS 6 Press 1 2 to adjust the setting that best suits your surround sound needs. 7 Press ENTER/OK to confirm. Notes: – Use a longer delay time setting when the surround speakers are closer to the listener than the front speakers. – A test tone will be automatically generated to help you judge the sound level of each speaker. SPEAKERS VOLUME SETUP FRONT LEFT FRONT RIGHT 0dB 0dB CENTER SUBWOOFER 0dB 0dB SURROUND L SURROUND R 0dB 0dB TIPS: To return to the previous menu, press 1. To remove the menu, press SETUP. 13 English [FRONT SPEAKER, CENTER SPEAKER, SURROUND SP] OFF (only for CENTER and SURROUND speakers) Select when no speakers are connected. LARGE Select if the connected speakers can reproduce low frequency signals below 120 Hz. SMALL Select if the connected speakers cannot reproduce low frequency signals below 120 Hz.  Disc Operations IMPORTANT! – If the inhibit icon ( or X) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. – Depending on the DVD or VIDEO CD, some operations may be different or restricted. – Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction. Basic Playback 1 Press STANDBY/ON on the front panel to turn on the DVD player. 2 Press OPEN/CLOSE / on the front panel to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. 4 Press OPEN/CLOSE / again to close the tray. ➜ After recognizing this disc, the player begins to play back automatically. ➜ If you press PLAY ( B ) when the tray is open, this unit closes the tray and starts playback. General Operation Unless otherwise stated, all operations described are based on Remote Control use. Pausing playback 1 During playback, press PAUSE ( ; ). ➜ Playback will pause and sound will be muted. 2 Press PAUSE ( ; ) again to select the next picture frame. 3 To resume normal playback, press PLAY ( B ). Selecting track/chapter • Press S / T or use the numeric buttons to key in a track/chapter number. ➜ If repeat mode is active, pressing S / T will replay the same track/chapter. Searching backward/forward • Press and hold S / T, then press PLAY ( B ) to resume normal playback. ➜ While searching, pressing S / T again will decrease/increase the search speed. Stopping playback • Press STOP ( 9 ). TIPS: 14 The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.  Disc Operations Repeat • While playing a disc, press REPEAT continuously to choose a ‘Play Mode’. DVD-V/DVD-A ➔ RPT ONE (repeat chapter) ➔ RPT TT (repeat title) ➔ RPT OFF (repeat off) VCD/SVCD/CD ➔ RPT ONE (repeat track) ➔ RPT ALL (repeat disc) ➔ RPT OFF (repeat off) Shuffle This function shuffles the playing order of chapters or tracks within a title/group/ album (if the title/group/album has more than one chapter or track) in random order. 1 Press SHUFFLE during playback. ➜ SHUFFLE appears on the screen for about two seconds. 2 To return to normal playback, press SHUFFLE again. Note: – For SA-CD, this function works in the currently selected area only. MP3/DivX/SA-CD ➔ RPT ONE (repeat track) ➔ RPT FLD (repeat folder) ➔ RPT OFF (repeat off) Note: – For VCD, repeat playback is not possible if the PBC mode is switched on. Repeating a section within a chapter/track 1 While playing a disc, press A-B at your chosen starting point. 2 Press A-B again at your chosen end point. ➜ The section A and B can be set only within the same chapter/track. ➜ The section will now repeat continuously. Operations for video playback (DVD/VCD/SVCD) Using the Disc Menu Depending on the disc, a menu may appear on the TV screen once you load in the disc. To select a playback feature or item • Use 1 234 or numeric buttons on the remote, then press ENTER/OK to start playback. To access or remove the menu • Press MENU on the remote. 3 To exit the sequence, press A-B. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 15 English Selecting various repeat/shuffle functions  Disc Operations Zooming in This function allows you to enlarge the picture on the TV screen and to pan through the enlarged picture. 1 During playback, press ZOOM repeatedly to display the picture with different scales. ➜ Use 1 234 to pan through the enlarged picture. ➜ Playback will continue. 2 Press ZOOM repeatedly to return to the original size. Resuming playback from the last stopped point Resume playback of the last 10 discs is possible, even if the disc was ejected or the power switched off. 1 Load one of the last 10 discs. ➜ “LOADING” appears. 2 Press PLAY ( B ) while the “LOADING” message is displayed. ➜ The disc will be played back from the last point. To cancel resume mode • In stop mode, press STOP ( 9 ) again. On-Screen Display (OSD) OSD menu shows the disc playback information (for example, title or chapter number, elapsed playing time, audio/ subtitle language), a number of operations can be done without interrupting disc playback. 1 During playback, press ON SCREEN. ➜ A list of available disc information appears on the TV screen. TIPS: 16 DVD MENU TITLE CHAPTER AUDIO SUBTITLE 02/14 02/14 5.1CH ENG BITRATE VCD/SVCD MENU TRACK DISC TIME TRACK TIME REPEAT 02/14 0:49:17 0:03:43 OFF BITRATE 2 Press 34 to view the information and press ENTER/OK to access. 3 Use the numeric buttons to input the number/time or press 34 to make the selection, then press ENTER/OK to confirm. ➜ Playback will change to the chosen time or to the selected title/chapter/track. Title/Chapter/Track selection (DVD/ VCD) 1 Press 34 to select [TITLE] or [CHAPTER] (DVD) or [TRACK] (VCD). 2 Press ENTER/OK. 3 Select a title, chapter or track number using the numeric buttons. The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.  Disc Operations 2 Press ENTER/OK. 3 Enter hours, minutes and seconds from left to right using the numeric buttons. (e.g. 0:34:27) Audio/Subtitle/Angle (DVD discs) You can change [AUDIO], [SUBTITLE] or [ANGLE] if it is available on the disc you are playing. 1 Press 34 to select [AUDIO], [SUBTITLE] or [ANGLE]. 2 Press ENTER/OK. 3 For Audio and Subtitle, Press 34 to highlight your selection and press ENTER/OK. OR For Angle, Select an angle using the numeric buttons. Special DVD Features English Time Search (DVD/VCD) 1 Press 34 to select [TT TIME] or [CH TIME] (DVD) or [TRACK TIME] or [DISC TIME] (VCD). ➜ [TT TIME] refers to the total time of the current title, and the [CH TIME] refers to the total time of the current chapter. Playing a Title 1 Press MENU. ➜ The disc title menu appears on the TV screen. 2 Use 1 234 or numeric buttons to select a play option. 3 Press ENTER/OK to confirm. Camera Angle • Press ANGLE repeatedly to select different desired angle. Audio Changing the Audio Language and/or format • Press AUDIO repeatedly to select different audio languages. Subtitles • Press SUBTITLE repeatedly to select different subtitle languages. Repeat/Time Display (DVD/VCD) 1 Press 34 to select [REPEAT] or [TIME DISP.]. 2 Press ENTER/OK. 3 Press 34 to highlight your selection and press ENTER/OK. Time display (CD) Each time you press ON SCREEN, the time display changes as follows; TIPS: TOTAL ELAPSED TOTAL REMAIN SINGLE REMAIN SINGLE ELAPSED The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 17  Disc Operations Special VCD & SVCD Features Playback Control (PBC) For VCD with Playback Control (PBC) feature (version 2.0 only) • Press MENU to toggle between ‘PBC ON’ and ‘PBC OFF’. ➜ If you select ‘PBC ON’, the disc menu (if available) will appear on the TV. ➜ Use the S / T or the numeric buttons to select a play option. • During playback, pressing TOP MENU/RETURN will return to the menu screen (if PBC is on). TRACK DIGEST This function will minimize the picture of every track in order to display every six of these tracks on the screen to help you know the content of every track on the disc. DISC INTERVAL This function is used to divide a disc into six parts by regular intervals and display them on one page to preview the whole disc. TRACK INTERVAL This function is used to divide a single track into six parts by regular intervals and display them on one page to help you preview the selected track. If you want to skip the index menu and playback directly from the beginning, • Press MENU on the remote control to switch to PBC off. Preview Function 1 Press SCAN. 2 Press 34 to highlight [TRACK DIGEST], [DISC INTERVAL] or [TRACK INTERVAL]. 3 Press ENTER/OK to open one option. SELECT DIGEST TYPE: TRACK DIGEST DISC INTERVAL TRACK INTERVAL Note: – You can select [TRACK INTERVAL] only during playback, with PBC Off. (example for 6 thumbnail pictures display) 4 Use 1 234 to select a track or use numeric buttons to input the selected track number next to [SELECT]. 5 Press S / T to open the previous or next page. 6 Press ENTER/OK to confirm. To quit preview function • Use 1 234 to highlight [EXIT] and press ENTER/OK to confirm. To return to preview menu • Use 1 234 to highlight [MENU] and press ENTER/OK to confirm. For CD • At stop mode, press SCAN on the remote control. ➜ Each track will be played for a few seconds. TIPS: 18 The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.  Disc Operations DVD-Audio has developed for the sole purpose of creating high quality pure sound with Linear PCM and Packed PCM (lossless coding) in up to six audiochannels. Sampling frequencies of 192 kHz/ 24 bits are supported. Moreover, many DVD-Audio discs offer slide show and page turn capabilities. • When you play a down mix prohibited disc, D.MIX indicator turns off. Multichannel tracks will play regardless of the analog output settings in Setup Menu. The MIXED 2CH jacks output the front L and R signals only. Changing pages Some DVD-Audio discs contain information pages for photo galleries, artist biographies, lyrics, etc. Each time you press PAGE on the remote control, the display moves to the next page. TIPS: Playing bonus groups Some discs contain bonus groups that require a four-digit password to gain access. In this case, consult the disc jacket and other packaging for information. 1 Press STOP ( 9 ) twice to stop playback, then press ON SCREEN . ➜ The group and track list is displayed on the TV screen. 2 Press 34 to select a bonus group, then press ENTER/OK. 3 Enter a four-digit password using the numeric buttons, then press ENTER/ OK. 4 Press 34 to select a track, then press ENTER/OK. DVD-Video mode Some DVD-Audio discs include DVDVideo contents that can be played on conventional DVD-Video players (see “Selecting DVD-Audio/Video mode” on page 23). The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 19 English DVD-Audio Features  Disc Operations Playing a disc SA-CD (Super Audio CD) The SA-CD standard is based on Direct Stream Digital (DSD) technology. This new direct-stream digital format comprises a 1-bit system that has a digital sampling frequency 64 times higher than that of conventional audio CD. There are three types of SA-CD discs: single layer, dual layer and hybrid. Each type contains a High Density (HD) layer that has two separate data areas: a High Quality Stereo area and a High Quality Multi-channel area. Recorded information can be contained in both areas. – A single layer disc has one HD layer. – A dual layer disc has two HD layers. Twice the information of a single layer disk can be stored due to the second HD layer. – A hybrid disc has one HD layer and one standard CD layer, making it playable on standard CD players. SA-CD Disc Types Dual layer disc Single layer disc HD layer HD layer Hybrid layer disc Hybrid SA-CD-Disc 2 3 TIPS: 20 2 To stop playback, press STOP ( 9 ). Note: – You cannot change the Analog output setting during SA-CD playback Changing the SA-CD playback area and layer 1 2 3 4 5 You can change the SA-CD playback area at any time during playback. Press SOUND MODE to switch between the multi-channel and stereo areas in the HD layer. OR Press 1. Highlight the folder using 34. Press ENTER/OK. Highlight a track using 34. Press ENTER/OK to begin playback. CD layer HD layer 1 1 Insert the disc and close the tray. Playback starts automatically. ➜ The TV screen will display the current playing status and track list. ➜ Playback will stop automatically at the end of the disc. For hybrid SA-CD, the player will always play the HD layer first. Press AUDIO while playback is stopped to switch between the HD and CD layers. CD layer that plays on any CD player • The SA-CD indicator lights only when the HD layer is selected. High Density layer containing: - High Quality DSD Stereo Note: – SA-CD Text is not supported. - High Quality DSD Multichannel The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.  Disc Operations General Operation 1 Load a disc. ➜ The disc reading time may exceed 30 seconds due to the complexity of the directory/file configuration. ➜ The data disc menu appears on the TV screen. 2 Playback will start automatically, if not press PLAY ( B ). 00:00 00:00 001/020 Favorite MP3 Piano MP3 Cello MP3 Jazz MP3 Live Selecting a folder and track/file 1 Press 34 to select the folder and press ENTER/OK to open the folder. 2 Press 34 to select a track/file. 3 Press ENTER/OK to confirm. ➜ Playback will start from the selected file to the end of the folder. Repeat When the Picture CD/MP3 CD menu is shown on the screen; • Press REPEAT continuously to access different ‘Play Mode’. ➜ FOLDER: files will be played back once. ➜ REPEAT ONE: one file will be played repeatedly. ➜ REPEAT FOLDER: all files in one folder will be played repeatedly. During playback, you can; • Press S / T to select another track/file in the current folder. • Press PAUSE ( ; ) to pause playback. Note: – It may not be possible to play certain MP3/ JPEG/DivX/MPEG-4 discs due to the configuration and characteristics of the disc or condition of the recording. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 21 English Playing MP3/DivX/JPEG/Kodak Picture CD  Disc Operations Special picture disc features 1 Load a Picture disc (Kodak Picture CD, JPEG). ➜ For Kodak disc, the slide show will begin. ➜ For JPEG disc, the picture menu appears on the TV screen. 2 Press PLAY ( B ) to start the slide-show playback. Preview Function (JPEG) This function shows the content of the current folder or the whole disc. 1 Press STOP ( 9 ) during playback. ➜ 12 thumbnail pictures will appear on the TV screen. Zoom picture 1 During playback, press ZOOM repeatedly to display the picture with different scales. 2 Use 1 234 to view the zoomed picture. Playback with multi-angles • During playback, press 1 234 to rotate the picture on the TV screen. 1: rotate the picture anti-clockwise 2: rotate the picture clockwise 3: flip the picture vertically 4: flip the picture horizontally Scan Effect • Press ANGLE repeatedly to choose different scan effect. ➜ Various of scan effect appears on the top left hand corner on the TV screen. Playing MP3 music and JPEG picture simultaneously 1 Load a disc that contains music and pictures. ➜ The disc menu appears on the TV screen. 2 Press S / T to display the other pictures on the previous/next page. 3 Use 1 234 to highlight one of the picture and press ENTER/OK to start playback OR Move the cursor to highlight on the bottom of the page to start playback from the first picture on the current page. 4 Press MENU to return to Picture CD menu. TIPS: 22 2 Select an MP3 track. 3 During MP3 music playback, select a picture from the TV screen and press PLAY ( B ). ➜ The picture files will be played back one after another until end of the folder. 4 To quit simultaneous playback, press MENU followed by STOP ( 9 ). Note: – Some files on Kodak or JPEG disc may be distorted during playback due to the configuration and characteristics of the disc. The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.  Setup Menu General Setup Menu 1 Press SETUP. 2 Press 1 2 to select ‘General Setup’ icon. 3 Press ENTER/OK to confirm. GENERAL SETUP PAGE DVD-AUDIO DISC LOCK DISPLAY DIM PROGRAM OSD LANGUAGE SCREEN SAVER SLEEP DIVX(R) VOD CODE Selecting DVD-Audio/Video mode 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight [DVD-AUDIO], then press 2. DVD-AUDIO MODE Select this for normal playback. DVD-VIDEO MODE Select this to playback the contents of the DVD-Video. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection. Notes: – The DVD-AUDIO indicator lights up when a DVD-Audio disc is playing. – When you select DVD-VIDEO MODE, the DVD-AUDIO indicator goes out. TIPS: Locking/Unlocking the disc for viewing Not all discs are rated or coded by the disc maker. You can prevent a specific disc from playing by locking the disc. Up to 40 discs can be locked. 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight [DISC LOCK], then press 2. LOCK Select this to lock the playback of the current disc. Subsequent access to a locked disc requires six-digit password. The default password is ‘000 000’ (see page 32 “Changing the Password”). UNLOCK Select this to unlock the disc and allow future playback. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection. Dimming player’s front panel display You can select different levels of brightness for the front panel display. 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight [DISPLAY DIM], then press 2. 100% Select this for full brightness. 70% Select this for medium brightness. 40% Select this for dimming the display. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection. To return to the previous menu, press 1. To remove the menu, press SETUP. 23 English The setup is carried out via the TV, enabling you to customize the DVD Player to suit your particular requirements.  Setup Menu Programming disc tracks (not for Picture CD/MP3) You can play the contents of the disc in the order you want by programming the tracks to be played. Up to 20 tracks can be stored. 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight [PROGRAM], then press 2 to select [INPUT MENU]. 2 Press ENTER/OK to confirm. To input your favorite tracks/chapter 3 Use the numeric buttons to enter a valid track/chapter number. 1 04 6 __ 2 10 7 __ 3 11 8 __ 4 __ 9 __ 5 __ 10 __ 4 Use 1 234 to move the cursor to the next position. ➜ If the track number is more than ten, press T to open the next page and proceed with programming or, ➜ Use 1 234 to highlight [NEXT] on the program menu, then press ENTER/ OK. 5 Repeat steps 3–4 to input another track/ chapter number. If you want to remove a track 6 Use 1 234 to move the cursor to the track you want to remove. 7 Press ENTER/OK to remove this track from the program menu. TIPS: 24 To return to the previous menu, press 1. To remove the menu, press SETUP. To start program playback 8 Use 1 234 to highlight [START] on the program menu, then press ENTER/OK. ➜ Playback will start with the selected tracks under the programmed sequence. To exit program playback 9 Use 1 234 to highlight [EXIT] on the program menu, then press ENTER/OK. OSD Language This menu contains various language options for display language on the screen. For details, see page 11. Screen Saver This function is used to turn the screen saver on or off. 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight [SCREEN SAVER], then press 2. ON Select this if you wish to turn off the TV screen when disc playback is stopped or paused for more than 15 minutes. OFF Select this to disable the screen saver function. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection.  Setup Menu This feature automatically sets the DVD player in standby mode after the amount of time you have set. 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight [SLEEP], then press 2. 2 Press 34 to select a setting. ➜ You can select from 15, 30, 45 and 60 minutes. Select [OFF] to cancel the sleep timer function. 3 Press ENTER/OK to confirm your selection. Audio Setup Menu English Sleep Timer 1 Press SETUP. 2 Press 1 2 to select ‘Audio Setup’ icon. 3 Press ENTER/OK to confirm. AUDIO SETUP PAGE ANALOG OUTPUT DIGITAL AUDIO SPEAKER SETUP CD UPSAMPLING NIGHT MODE DivX® VOD registration code Yamaha provides you with a DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit at www.divx.com/vod. 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight [DIVX(R) VOD CODE], then press 2. ➜ The registration code will appear. 2 Press ENTER/OK to exit. 3 Use the registration code to purchase or rent the videos from DivX® VOD service at www.divx.com/vod. Follow the instructions and download the video onto a CD-R for playback on this DVD player. Notes: – All the downloaded videos from DivX® VOD can only be played back on this DVD player. – Time search feature is not available during DivX movie playback. TIPS: Setting the analog output Set Analog Output to match your DVD Player’s playback capability. 1 In ‘AUDIO SETUP PAGE’, press 34 to highlight [ANALOG OUTPUT], then press 2. STEREO Select this to change the channel output to stereo, which only delivers sound from the two front speakers and subwoofer. VIRTUAL SURR Select this to reproduce the surround channels virtually. MULTI-CHANNEL Select this setting when using a multichannel audio/(video) receiver with 6 channel inputs. In this mode, the player performs DTS decoding or Dolby Digital 5.1-channel decoding when applicable, and Dolby Pro Logic decoding on DVD-Video, Video-CD and Audio CD discs with 2-channel sound tracks. No Dolby Pro Logic decoding is done with Super Audio CD discs. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection. To return to the previous menu, press 1. To remove the menu, press SETUP. 25  Setup Menu 1 2 3 4 Setting the Digital output Speaker Setup The options included in Digital Audio are: ‘Digital Output’ and ‘LPCM Output’. In ‘AUDIO SETUP PAGE’, press 34 to highlight [DIGITAL AUDIO], then press 2. Press the 34 to highlight an option. Enter its submenu by pressing 2. Move the cursor by pressing the 34 to highlight the selected item. This menu contains setup options for audio output so that you can set your speakers to reproduce high quality surround sound. For details, see page 12. DIGITAL OUTPUT Set the Digital output according to your optional audio equipment connection. OFF Turn off the digital output. ALL If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/ receiver. PCM ONLY Only if your receiver is not capable of decoding multi-channel audio. LPCM OUTPUT If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical, etc., you may need to adjust ‘LPCM Output’. Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality. 48KHz Playback a disc recorded at the sampling rate of 48kHz. 96kHz (if available on disc) PCM data stream will be converted to 48kHz. 96KHz Playback a disc recorded at the sampling rate of 96kHz. If the 96kHz disc is copy protected, the digital output will be muted to comply with the standards. TIPS: 26 To return to the previous menu, press 1. To remove the menu, press SETUP. CD Upsampling This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. If you have activated the upsampling, the player will automatically switch to stereo mode. 1 In ‘AUDIO SETUP PAGE’, press 34 to highlight [CD UPSAMPLING], then press 2. OFF Select this to disable CD-upsampling. 88.2 kHz (X2) Select this to convert the sampling rate of the CDs twice higher than the original. 176.4 kHz (X4) Select this to convert the sampling rate of the CDs four times higher than the original. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection. Note: – This setting is only applicable for the signals output from the analog jacks.  Setup Menu In this mode, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching your favorite action movie without disturbing others at night. 1 In ‘AUDIO SETUP PAGE’, press 34 to highlight [NIGHT MODE], then press 2. ON Select this to level out the volume. This feature is only available for movies with Dolby Digital mode. OFF Select this when you want to enjoy the surround sound with its full dynamic range. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection. Video Setup Menu 1 Press SETUP. 2 Press 1 2 to select ‘Video Setup’ icon. 3 Press ENTER/OK to confirm. VIDEO SETUP PAGE TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING BLACK LEVEL CLOSED CAPTION Setting the TV Display Set the aspect ratio of the DVD Player according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback. 1 In ‘VIDEO SETUP PAGE’, press 34 to highlight [TV DISPLAY], then press 2. 2 Press 34 to highlight one of the options below: 4:3 PAN SCAN Select this if you have a normal TV and want both sides of the picture to be trimmed or formatted to fit your TV screen. 4:3 LETTER BOX Select this if you have a normal TV. In this case, a wide picture with black bands on the upper and lower portions of the TV screen will be displayed. 16:9 Select this if you have a widescreen TV. 3 Select an item and press ENTER/OK. TV Type This menu contains the options for selecting the color system that matches the connected TV. For details, see page 10. TIPS: To return to the previous menu, press 1. To remove the menu, press SETUP. 27 English Night Mode  Setup Menu Progressive This feature is only applicable if you have connected this DVD Player to a Progressive Scan TV through the Y Pb Pr jacks (see page 9). 1 In ‘VIDEO SETUP PAGE’, press 34 to highlight [PROGRESSIVE], then press 2. OFF To disable Progressive Scan function. ON To enable Progressive Scan function. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection. Notes on activating Progressive: – Ensure that your TV has progressive scan. – Connect with YPbPr video cable. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR VIDEO MONITOR COMPATIBILITY WITH THIS MODEL 525P AND 625P DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. This unit is compatible with the complete line of YAMAHA products, including the projectors DPX1100, LPX-510 and the plasma monitor PDM4210/4210E. TIPS: 28 To return to the previous menu, press 1. To remove the menu, press SETUP. Picture Setting This DVD Player provides three predefined sets of picture color settings and one personal setting which you can define yourself. 1 In ‘VIDEO SETUP PAGE’, press 34 to highlight [PICTURE SETTING], then press 2. STANDARD Select this for standard picture setting. BRIGHT Select this will make the TV picture brighter. SOFT Select this will make the TV picture softer. PERSONAL Select this to personalize your picture color by adjusting the brightness, contrast, tint and color (saturation). 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection. 3 If you select [PERSONAL], then proceed to steps 4–7. ➜ The ‘PERSONAL PICTURE SETUP’ menu appears. PERSONAL PICTURE SETUP BRIGHTNESS CONTRAST TINT COLOR 0 0 0 0 4 Press 34 to highlight one of the following options.  Setup Menu Selecting the black level (U.S.A. model only) If you set the TV type to NTSC, set Black level shift to ON. This will improve the color contrast during playback. The black level setting has no effect if the TV type is set to PAL. 1 In ‘VIDEO SETUP PAGE’, press 34 to highlight [BLACK LEVEL], then press 2. ON Select this to enhance the black level. OFF Select this for the standard black level setting. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection. TIPS: Closed Caption (U.S.A. model only) Closed captions are data hidden in the video signals of specific discs, and are invisible without the use of a special decoder. The difference between subtitles and captions is that subtitles are intended for hearing persons and captions are for the hearing impaired. Subtitles rarely show all of the audio. For example, captions show sound effects (e.g., “phone ringing” and “footsteps”), while subtitles do not. Before you select this function, please ensure that the disc contains closed caption information and your TV set also supports this function. 1 In ‘VIDEO SETUP PAGE’, press 34 to highlight [CLOSED CAPTION], then press 2. ON To enable the closed caption function. OFF To disable the closed caption function. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection To return to the previous menu, press 1. To remove the menu, press SETUP. 29 English BRIGHTNESS Increase the value will brighten the picture or vice versa. Choose zero (0) for average setting. CONTRAST Increase the value will sharpen the picture or vice versa. Choose zero (0) to balance the contrast. TINT Increase the value will darken the picture or vice versa. Choose zero (0) for average setting. COLOR Increase the value will enhance the color in your picture or vice versa. Choose zero (0) to balance the color. 5 Press 1 2 to adjust the setting that best suit your personal preference. 6 Repeat steps 4–5 for adjusting other color features. 7 Press ENTER/OK to confirm.  Setup Menu Preference Setup Menu 1 Press STOP ( 9 ) twice to stop playback (if any), then press SETUP. 2 Press 1 2 to select the ‘Preference Setup’ icon. 3 Press ENTER/OK to confirm. PREFERENCE PAGE AUDIO SUBTITLE DISC MENU PARENTAL PBC MP3/JPEG NAV VR LIST PASSWORD Audio, Subtitle, Disc Menu These menus contain various language options for audio, subtitle and disc menu which may be recorded on the DVD. For details, see page 12. Restricting playback by Parental Control Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes. TIPS: 30 To return to the previous menu, press 1. To remove the menu, press SETUP. 1 In ‘PREFERENCE PAGE’, press 34 to highlight [PARENTAL], then press 2. PREFERENCE PAGE AUDIO SUBTITLE DISC MENU PARENTAL PBC MP3/JPEG NAV VR LIST PASSWORD 1 KID SAFE 2G 3 PG 4 PG 13 5 PGR 6R 7 NC 17 8 ADULT 2 Press 34 to highlight a rating level for the disc inserted and press ENTER/OK. ➜ To disable Parental controls and have all Discs play, select [8 ADULT]. 3 Use the numeric buttons to enter the six-digit password (see page 32 “Changing the Password”). ➜ DVDs that are rated above the level you selected will not play unless you enter your six-digit password. Notes: – VCD, SVCD, CD and SA-CD have no level indication, so parental control function has no effect on these types of discs. This applies to most illegal DVD discs. – Some DVDs are not encoded with a rating though the movie rating may be printed on the disc cover. The rating level feature does not work for such discs. PBC (Playback Control) You can set the PBC to ON or OFF. This feature is available only on Video CD 2.0 with playback control (PBC) feature. For details, see page 18.  Setup Menu MP3/JPEG Navigator can be set only if the disc is recorded with menu. It allows you to select different display menus for easy navigation. 1 In ‘PREFERENCE PAGE’, press 34 to highlight [MP3/JPEG NAV], then press 2. WITHOUT MENU Select this to display all the files contained in the MP3/Picture CD. WITH MENU Select this to display only the folder menu of the MP3/Picture CD. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection. Playback of VR Format 1 2 3 4 There are two ways to play back a disc in VR (Video Recording) format: ORIGINAL and PLAY LIST. This feature is not available with non-VR format discs. In ‘PREFERENCE PAGE’, press 34 to highlight [VR LIST]. Press 2. The following settings will appear: ORIGINAL LIST Select this to play the originally recorded titles on the disc. PLAY LIST Select this to play the edited version of the disc. This feature is only available when a play list has been created. Press 34 to highlight a setting. Press ENTER/OK to confirm your selection. TIPS: To play back a disc in VR format 5 Press SETUP to close the setup menu. 6 Press PLAY. The setting you selected will begin to play. Previewing VR format 7 During playback, press SCAN. 8 Press 34 to highlight either [TITLE DIGEST] or [TITLE INTERVAL]. SELECT DIGEST TYPE: TITLE DIGEST TITLE INTERVAL 9 Press ENTER/OK to select the function. TITLE DIGEST This function will display thumbnail pictures of titles on the screen. Up to six thumbnail pictures per page will be displayed. ➜ In ORIGINAL LIST mode, the originally recorded titles on the disc will be displayed. ➜ In PLAY LIST mode, every title in the play list will be displayed. TITLE INTERVAL This function will divide and display the contents of each title being played back in regular intervals, making it easy to preview the recording. Up to six thumbnail pictures per page will be displayed. ➜ If the title being played back is short, the TITLE DIGEST function will be performed instead. To return to the previous menu, press 1. To remove the menu, press SETUP. 31 English MP3/JPEG Menu  Setup Menu 2 Press ENTER/OK to enter the ‘Password Change Page’. OLD PASSWORD NEW PASSWORD CONFIRM PWD (example for 6 thumbnail pictures display) 10 Use 1 234 to select a title, or use the numeric buttons to input the title number next to [SELECT]. ➜ Press S / T to access the previous/next page. 11 Press ENTER/OK to confirm the selection. To quit preview function • Use 1 234 to highlight [EXIT] and press ENTER/OK to confirm. To return to preview menu • Use 1 234 to highlight [MENU] and press ENTER/OK to confirm. Changing the Password The same password is used for both Parental Control and Disc Lock. Enter your six-digit password when prompted on the screen. The default password is 000 000. 1 In ‘PREFERENCE PAGE’, press 34 to highlight [PASSWORD], then press 2 to select [CHANGE]. PREFERENCE PAGE AUDIO SUBTITLE DISC MENU PARENTAL PBC MP3/JPEG NAV VR LIST PASSWORD TIPS: 32 CHANGE To return to the previous menu, press 1. To remove the menu, press SETUP. OK 3 Use the numeric buttons to enter your old six-digit password. ➜ When doing this for the first time, key in ‘000 000’. ➜ If you forget your old six-digit password, key in ‘000 000’. 4 Enter the new six-digit password. 5 Enter the new six-digit password a second time to confirm. 6 Press ENTER/OK to confirm. ➜ The new six-digit password will now take effect. Restoring to original settings Setting the DEFAULT function will reset all options and your personal settings to the factory defaults, except your password for Parental Control and Disc Lock. 1 In ‘PREFERENCE PAGE’, press 34 to highlight [DEFAULT], then press 2 to select [RESET]. 2 Press ENTER/OK to confirm. ➜ All settings will now reset to factory defaults.  Language Codes Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Avestan Aymara Azerbaijani Bashkir Basque Belarusian Bengali Bihari Bislama Bokmål, Norwegian Bosnian Breton Bulgarian Burmese Castilian, Spanish Catalan Chamorro Chechen Chewa; Chichewa; Nyanja Chichewa; Chewa; Nyanja Chinese Chuang; Zhuang Church Slavic; Slavonic; Church Slavonic; Church Chuvash Cornish Corsican Croatian Czech Danish Dutch Dzongkha English Esperanto Estonian Faroese Fijian Finnish French Frisian Gaelic; Scottish Gaelic Gallegan Georgian 6566 6565 6570 8381 6577 6582 7289 6583 6569 6589 6590 6665 6985 6669 6678 6672 6673 7866 6683 6682 6671 7789 6983 6765 6772 6769 7889 7889 9072 9065 6785 6785 6786 7587 6779 7282 6783 6865 7876 6890 6978 6979 6984 7079 7074 7073 7082 7089 7168 7176 7565 German Gikuyu; Kikuyu Greek, Guarani Gujarati Hausa Hebrew Herero Hindi Hiri Motu Hungarian Icelandic Ido Indonesian Interlingua (International) Interlingue Inuktitut Inupiaq Irish Italian Japanese Javanese Kalaallisut Kannada Kashmiri Kazakh Khmer Kikuyu; Gikuyu Kinyarwanda Kirghiz Komi Korean Kuanyama; Kwanyama Kurdish Kwanyama; Kuanyama Lao Latin Latvian Letzeburgesch; Limburgan; Limburger; Limburger; Limburgan; Limburgish; Limburger; Lingala Lithuanian Luxembourgish; Macedonian Malagasy Malay Malayalam Maltese Manx English These pages can be used to select other languages.This does not affect the options in “AUDIO”, “SUBTITLE” or “DISC MENU”. 6869 7573 6976 7178 7185 7265 7269 7290 7273 7279 7285 7383 7379 7368 7365 7369 7385 7375 7165 7384 7465 7486 7576 7578 7583 7575 7577 7573 8287 7589 7586 7579 7574 7585 7574 7679 7665 7686 7666 7673 7673 7673 7678 7684 7666 7775 7771 7783 7776 7784 7186 33  Language Codes These pages can be used to select other languages.This does not affect the options in “AUDIO”, “SUBTITLE” or “DISC MENU”. Maori Marathi Marshallese Moldavian Mongolian Nauru Navaho, Navajo Navajo; Navaho Ndebele, North Ndebele, South Ndonga Nepali Northern Sami North Ndebele Norwegian Norwegian Bokmål; Bokmål, Norwegian Nynorsk; Nyanja; Chichewa; Chewa Nynorsk, Norwegian; Occitan (post 1500); Proven Old Bulgarian; Old Slavonic; Old Church Slavonic; Old Old Slavonic; Church Oriya Oromo Ossetian; Ossetic Ossetic; Ossetian Pali Panjabi Persian Polish Portuguese Provençal; Occitan (post) Pushto Quechua Raeto-Romance Romanian Rundi Russian Samoan Sango Sanskrit Sardinian Scottish Gaelic; Gaelic Serbian Shona Sindhi Sinhalese Slovak Slovenian Somali 34 7773 7782 7772 7779 7778 7865 7886 7886 7868 7882 7871 7869 8369 7868 7879 7866 7878 7889 7878 7967 6785 6785 6785 7982 7977 7983 7983 8073 8065 7065 8076 8084 7967 8083 8185 8277 8279 8278 8285 8377 8371 8365 8367 7168 8382 8378 8368 8373 8375 8376 8379 Sotho, Southem South Ndebele Spanish; Castilian Sundanese Swahili Swati Swedish Tagalog Tahitian Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga (Tonga Islands) Tsonga Tswana Turkish Turkmen Twi Uighur Ukrainian Urdu Uzbek Vietnamese Volapük Walloon Welsh Wolof Xhosa Yiddish Yoruba Zhuang; Chuang Zulu 8384 7882 6983 8385 8387 8383 8386 8476 8489 8471 8465 8484 8469 8472 6679 8473 8479 8483 8478 8482 8475 8487 8571 8575 8582 8590 8673 8679 8765 6789 8779 8872 8973 8979 9065 9085  Troubleshooting Problem Solution No power – Check if the AC power cord is properly connected. – Press the STANDBY/ON on the front of the DVD system to turn on the power. No picture – Refer to your TV’s manual for correct Video In selection. Change the TV input until you see the DVD screen. – Check if the TV is switched on. – If you did not use Progressive Scan connections (using the Y PB PR jacks on the DVD Player) and you do not have a picture at the TV, please follow the steps below to turn off Progressive Scan; 1. Press / (OPEN/CLOSE) to open the disc tray. 2. Press 1. 3. Press ANGLE to deactivate the Progressive. ➜ The DVD Player will reset itself to Component/Interlaced video. Distorted picture – Sometimes a small amount of picture distortion may appear depending on the disc being played back. This is not a malfunction. Completely distorted picture or black/white picture with DVD – Make sure the disc is compatible with the DVD Player. – Ensure that the DVD Player’s TV Type is set to match that of the disc and your TV. No sound or distorted sound – Adjust the volume. – Check that the speakers are connected correctly. No audio at digital output – Check the digital connections. – Check if your receiver can decode MPEG-2 or DTS and if not, please make sure the digital output is set to PCM ONLY. – Check if the audio format of the selected audio language matches your receiver capabilities. Disc can’t be played – The CD-R/RW, DVD+R/RW, DVD-R/RW and DVD-RW (VR format) must be finalized. – Ensure the disc label is facing up. – Check if the disc is defective by trying another disc. – If you have recorded a Picture CD or MP3 CD yourself, ensure that your disc contains at least 10 pictures or 5 MP3 tracks. – Region code incorrect. 35 English Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center.  Troubleshooting Problem 36 Solution Picture freezes momentarily during playback – Check the disc for fingerprints/scratches and clean with a soft cloth wiping from center to edge. The player does not respond to the Remote Control – Aim the Remote Control directly at the sensor on the front of the player. – Reduce the distance to the player. – Replace the batteries in the Remote Control. – Re-insert the batteries with their polarities (+/– signs) as indicated. Buttons do not work – To completely reset the player, unplug the AC cord from the AC outlet for 5-10 seconds. Player does not respond to some operating commands during playback – Operations may not be permitted by the disc. Refer to the instructions of the disc jacket. DVD Player cannot read CDs/ DVDs – Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD Player for repair. Menu items cannot be selected – Press STOP twice before selecting System Menu. – Depending on the disc availability, some menu items cannot be selected. Unable to play DivX movies – Check that the DivX file is encoded in ‘Home Theater’ mode with DivX 5.x encoder. Unable to select Progressive Scan on/off – Check that the output of the video signal is switch to ‘YUV’. No sound during DivX movies playback – The audio code may not be supported by the DVD player.  Glossary Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of widescreens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV, Stereo, etc.). Bit Rate: The amount of data used to hold a given length of music; measured in kilobits per seconds, or kbps. Or, the speed at which you record. Generally, the higher the bit rate, or the higher the recording speed, the better the sound quality. However, higher bit rates use more space on a Disc. Chapter: Sections of a picture or a music piece on a DVD that are smaller than titles. A title is composed of several chapters. Each chapter is assigned a chapter number enabling you to locate the chapter you want. Component Video Out Jacks: Jacks on the back of the DVD System that send high-quality video to a TV that has Component Video In jacks (R/G/B,Y/Pb/Pr, etc.). Disc menu: A screen display prepared for allowing selection of images, sounds, subtitles, multi-angles, etc. recorded on a DVD. Digital: Sound that has been converted into numerical values. Digital sound is available when you use the DIGITAL AUDIO OUT COAXIAL or OPTICAL jacks. These jacks send audio through multiple channels, instead of just two channels as analog does. DivX 3.11/4x/5x: The DivX code is a patent pending, MPEG-4 based video compression technology, developed by DivXNetworks, Inc., that can shrink digital video to sizes small enough to be transported over the internet, while maintaining high visual quality. Dolby Digital: A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio (front left and right, surround left and right, center and subwoofer). English Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. DTS: Digital Theatre Systems. This is a surround sound system, but it is different from Dolby Digital. The formats were developed by different companies. JPEG: A very common digital still picture format. A still-picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio. MP3: A file format with a sound data compression system. “MP3” is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. By using MP3 format, one CD-R or CDRW can contain about 10 times as much data volume as a regular CD can. Multichannel: DVD is specified to have each sound track constitute one sound field. Multichannel refers to a structure of sound tracks having three or more channels. Parental Control: A function of the DVD to limit playback of the disc by the age of the users according to the limitation level in each country. The limitation varies from disc to disc; when it is activated, playback will be prohibited if the software’s level is higher than the user-set level. PCM (Pulse Code Modulation): A system for converting analog sound signal to digital signal for later processing, with no data compression used in conversion. Playback control (PBC): Refers to the signal recorded on video CDs or SVCDs for controlling reproduction. By using menu screens recorded on a Video CD or SVCD that supports PBC, you can enjoy interactive-type software as well as software having a search function. Play list: A list of selected titles to be played back in a specific order. This option is only available with VR format and must be created beforehand. 37  Glossary Progressive Scan: I.t displays all the horizontal lines of a picture at one time, as a signal frame. This system can convert the interlaced video from DVD into progressive format for connection to a progressive display. It dramatically increases the vertical resolution. Region code: A system for allowing discs to be played back only in the region designated beforehand. This unit will only play discs that have compatible region codes.You can find the region code of your unit by looking on the product label. Some discs are compatible with more than one region (or ALL regions). S-Video: Produces a clear picture by sending separate signals for the luminance and the color. You can use S-Video only if your TV has S- video In jack. Super Audio CD (SA-CD): This audio format is based upon the current CD standards but includes a greater amount of information that provides higher quality sound. There are three types of discs: single layer, double layer and hybrid discs. The hybrid disc contains both standard audio CD and Super Audio CD information. Surround: A system for creating realistic three dimensional sound fields full of realism by arranging multiple speakers around the listener. Title: The longest section of a picture or music feature on DVD, music, etc., in video software, or the entire album in audio software. Each title is assigned a title number enabling you to locate the title you want. VIDEO OUT jack: Jack on the back of the DVD System that sends video to a TV. VR (Video Recording) format: A format which enables you to create a DVD disc that can be extensively re-edited. 38  Specifications AUDIO PERFORMANCE DVD Video DVD-Audio SA-CD multi-channel and SA-CD stereo Video CD & SVCD CD PICTURE CD CD-R, CD-RW DVD+R, DVD+RW DVD-R, DVD-RW DA Converter 24 bit Signal-Noise (1 kHz) 110 dB Dynamic range (1 kHz) 100 dB DVD fs 96 kHz fs 48 kHz SVCD fs 48 kHz fs 44.1 kHz CD/VCD fs 44.1 kHz Distortion and Noise (1 kHz) VIDEO PERFORMANCE TV STANDARD (NTSC/60 Hz) (PAL/50 Hz) Video (CVBS) Output S-Video output Number of lines Playback Component video output 1 Vpp into 75 ohm Y: 1 Vpp into 75 ohm C: 0.3 Vpp into 75 ohm Y: 1 Vpp into 75 ohm Pb/Cb Pr/Cr: 0.7 Vpp into 75 ohm AUDIO FORMAT Digital Mpeg/Dolby Digital/Compressed Digital DTS PCM 16, 20, 24 bits fs, 44.1, 48, 96 kHz MP3(ISO 9660) 24, 32, 56, 64, 96, 128, 256 kbps fs, 16, 22.05, 24, 32, 44.1, 48 kHz WMA 32 kbps–192 kbps, mono, stereo Full decoding of Dolby Digital, DTS and MPEG multichannel sound/analog stereo sound Dolby Surround Compatible Downmix from Dolby Digital multi-channel sound 3D sound for virtual 5.1 channel sound on two speakers Dolby Pro Logic II 5.1 ch decoding from the stereo source 525 Multistandard English PLAYBACK SYSTEM 2 Hz- 44 kHz 2 Hz- 22 kHz 2 Hz- 22 kHz 2 Hz- 20 kHz 2 Hz- 20 kHz 0.003 % 625 (PAL/NTSC) CONNECTIONS Y Output Pb/Cb Output Pr/Cr Output S-Video Output Video Output Audio Output (L+R) Digital Output Cinch (green) Cinch (blue) Cinch (red) Mini DIN, 4 pins Cinch Cinch 1 coaxial, 1 optical IEC60958 for CDDA/LPCM IEC61937 for MPEG1, MPEG 2, Dolby Digital and DTS 6 channel analog output Audio Front L/R Cinch (white/red) Audio Surround L/R Cinch (white/red) Audio Center Cinch (blue) Audio Subwoofer Cinch (black) CABINET Dimensions (w x d x h) Weight 435 x 310 x 51 mm Approx. 2.6 Kg POWER SUPPLY Power supply Power usage Power usage standby U.S.A.model Australia model 120 V, 60 Hz 240 V, 50 Hz Approx. 14 W <1W Specifications subject to change without prior notice. 39  UA DVD AUDIO/VIDEO SA-CD PLAYER LECTEUR DE DVD AUDIO/VIDEO SA-CD DVD-S657 OWNER’S MANUAL MODE D’EMPLOI ©2005 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA Printed All rights reserved. in China 3139 246 15073