Yamaha DVD-S2500 El manual del propietario

Marca: Yamaha

Modelo: DVD-S2500

Categoría: Reproductores de DVD

Tipo: El manual del propietario

DVD AUDIO/VIDEO SA-CD PLAYER

LECTEUR DE DVD AUDIO/VIDEO SA-CD

DVD-S2500

OWNER’S MANUAL

MODE D’EMPLOI

IMPORTANT SAFETY INSTRUCTIONS

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert you to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert you to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

1 Read Instructions — All the safety and operating instructions

should be read before the product is operated.

2 Retain Instructions — The safety and operating instructions should

be retained for future reference.

3 Heed Warnings — All warnings on the product and in the operating

instructions should be adhered to.

4 Follow Instructions — All operating and use instructions should be

followed.

5 Cleaning — Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp

cloth for cleaning.

6 Attachments — Do not use attachments not recommended by the

product manufacturer as they may cause hazards.

7 Water and Moisture — Do not use this product near water — for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub;

in a wet basement; or near a swimming pool; and the like.

8 Accessories — Do not place this product on an unstable cart, stand,

tripod, bracket, or table. The product may fall, causing serious

injury to a child or adult, and serious damage to the product. Use

only with a cart, stand, tripod, bracket, or table recommended by the

manufacturer, or sold with the product.

Any mounting of the product should follow the manufacturer’s

instructions, and should use a mounting accessory recommended

by the manufacturer.

9 A product and cart combination should be moved

with care. Quick stops, excessive force, and uneven

surfaces may cause the product and cart combination

to overturn.

10 Ventilation — Slots and openings in the cabinet are

provided for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these openings must

not be blocked or covered. The openings should never be blocked

by placing the product on a bed, sofa, rug, or other similar surface.

This product should not be placed in a built-in installation such as

a bookcase or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

11 Power Sources — This product should be operated only from the

type of power source indicated on the marking label. If you are not

sure of the type of power supply to your home, consult your product

dealer or local power company. For products intended to operate

from battery power, or other sources, refer to the operating

instructions.

12 Grounding or Polarization — This product may be equipped with a

polarized alternating current line plug (a plug having one blade

wider than the other). This plug will fit into the power outlet only

one way. This is a safety feature. If you are unable to insert the plug

fully into the outlet, try reversing the plug. If the plug should still

fail to fit, contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

13 Power-Cord Protection — Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit from the

product.

14 Lightning — For added protection for this product during a

lightning storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and disconnect the

antenna or cable system. This will prevent damage to the product

due to lightning and power-line surges.

15 Power Lines — An outside antenna system should not be located in

the vicinity of overhead power lines or other electric light or power

circuits, or where it can fall into such power lines or circuits. When

installing an outside antenna system, extreme care should be taken

to keep from touching such power lines or circuits as contact with

them might be fatal.

16 Overloading — Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result in a risk of fire or

electric shock.

17 Object and Liquid Entry — Never push objects of any kind into this

product through openings as they may touch dangerous voltage

points or short-out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the product.

18 Servicing — Do not attempt to service this product yourself as

opening or removing covers may expose you to dangerous voltage

or other hazards. Refer all servicing to qualified service personnel.

19 Damage Requiring Service — Unplug this product from the wall

outlet and refer servicing to qualified service personnel under the

following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the

product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the product to its normal operation,

e) If the product has been dropped or damaged in any way,

and

f) When the product exhibits a distinct change in performance

- this indicates a need for service.

20 Replacement Parts — When replacement parts are required, be sure

the service technician has used replacement parts specified by the

manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or

other hazards.

21 Safety Check — Upon completion of any service or repairs to this

product, ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

22 Wall or Ceiling Mounting — The unit should be mounted to a wall

or ceiling only as recommended by the manufacturer.

23 Heat — The product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products (including

amplifiers) that produce heat.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment

by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion - and, most

importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s

Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

FCC INFORMATION (for US customers)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not

expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B”

digital devices.

Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment

will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not

installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other

electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this

product is found to be the source of interference, which can be determined by turning the product “OFF” and “ON”, please try to

eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-

in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe Ave. Buena Park,

CA90622.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

le laser

CAUTION

- Visible and invisib

radiation when open. Avoid exposure to beam.

For Customer Use:

Read carefully the information located at the rear panel of the

player and enter below the Serial No. Retain this information for

future reference.

Model No.

Serial No. __________________________

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot

and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

This digital apparatus does not exceed the Class B limits for radio

noise emissions from digital apparatus as set out in the Radio

Interference Regulations of the Canadian Department of

Communications.

CAUTION

Use of controls or adjustments or performance of procedures other

than those specified herein may result in hazardous radiation

exposure.

POUR LES CONSOMMATEURS CANADIENS

Pour éviter les chocs électriques, introduire la lame la plus large de

la fiche dans la borne correspondante de la prise et pousser

jusqu’au fond.

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

iii

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this sound system in a well ventilated, cool, dry,

clean place — away from direct sunlight, heat sources,

vibration, dust, moisture, or cold. In a cabinet, allow

about 2.5cm (1 inch) of free space all around this unit

for adequate ventilation.

3 Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes

from cold to hot, nor locate this unit in an environment

with high humidity (i.e., a room with a humidifier) to

prevent condensation inside this unit, which may cause

an electrical shock, fire, damage to this unit, and/or

personal injury.

5 Avoid installing this unit in a location where foreign

objects may fall onto this unit or where this unit may be

exposed to liquid dripping or splashing. On the top of

this unit, do not place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall,

spilling the liquid and causing an electrical shock to

the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause fire,

damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

Do not use excessive force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Use only the voltage specified on this unit. Using this

unit with a higher voltage than specified is dangerous

and may cause fire, damage to this unit, and/or

personal injury. YAMAHA will not be held responsible

for any damage resulting from use of this unit with a

voltage other than as specified.

13 To prevent damage by lightning, disconnect the power

cord from the wall outlet during an electrical storm.

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be opened

for any reason.

15 When not planning to use this unit for long periods of

time (i.e., vacation), disconnect the AC power plug

from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set

the unit in standby mode, then disconnect the AC

power plug from the wall outlet.

18 Place this unit on a flat, hard and stable surface.

19 There must be sufficient room in front of the player for

the disc tray to be opened.

20 The mechanical parts of the set contain self-lubricating

bearings and must not be oiled or lubricated.

NOTE:

Pictures shown maybe different between countries.

Never make or change connections with the power switched

on.

When playing DTS encoded CDs, excessive noise will be

heard from the analog stereo outputs. To avoid possible

damage to the audio system, the consumer should take

proper precautions when the analog stereo outputs of the

player are connected to an amplification system. To enjoy

DTS Digital Surround™ playback, an external 5.1-channel

DTS Digital Surround™ decoder system must be connected

to the digital output of the player.

LASER SAFETY

This unit employs a laser. Due to possible eye injury, only

a qualified service person should remove the cover or

attempt to service this device.

CAUTION

VISIBLE AND INVISIBLE LASER RADIATION WHEN

OPEN. AVOID EXPOSURE TO BEAM.

DANGER

This unit emits visible laser radiation when open. Avoid

direct eye exposure to beam.

When this unit is plugged into a wall outlet, do not place

your eyes close to the opening of the disc tray and other

openings or look inside.

The unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if this

unit itself is turned off. This state is called the standby

mode. In this state, this unit is designed to consume a

very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

LASER DIODE PROPERTIES

Type Semiconductor laser GaAlAs

Wave length 650 nm (DVD/SA-CD)

790 nm (VCD/CD)

Output Power 7 mW (DVD/SA-CD/VCD/CD)

English

Patent information............................................................2

Playable disc formats .......................................................2

Region management information.....................................3

Supplied accessories ........................................................3

Installing batteries in the remote control .........................3

Using the remote control..................................................4

Maintenance.....................................................................4

Front panel .......................................................................5

Rear panel ........................................................................6

Remote control connectors and RS-232C terminal .........6

Remote control.................................................................7

Audio connection.............................................................8

Digital audio connections .................................................8

i.LINK components connections ......................................8

Analog audio (6CH DISCRETE) connection...................8

Analog audio (MIXED 2CH) connection.........................9

Video connections............................................................9

HDMI component connections.........................................9

Switching on ..................................................................10

Setups before the initial playback..................................10

General operation...........................................................12

Preferences.....................................................................12

Features...........................................................................12

Adv.Picture .....................................................................12

Picture .............................................................................13

Sound ..............................................................................13

Toolbar...........................................................................14

Program...........................................................................14

View................................................................................14

Play option ......................................................................14

Search..............................................................................14

Slide Show ......................................................................15

Setup ..............................................................................15

Access .............................................................................15

Features...........................................................................15

TV ...................................................................................15

Audio Menu ....................................................................16

Language.........................................................................17

Speakers ..........................................................................17

DVD/CD Mode...............................................................18

SA-CD Mode ..................................................................18

i.LINK.............................................................................18

Basic playback ...............................................................20

DVD-Video and DVD-Audio ........................................20

Playing a disc ..................................................................20

Smart Resume .................................................................20

DVD features.................................................................21

Menu............................................................................... 21

Camera angle .................................................................. 21

Changing the audio language and format....................... 21

Subtitle language ............................................................ 21

DVD-Audio features ..................................................... 21

Changing pages .............................................................. 21

Playing bonus groups ..................................................... 21

DVD Video Mode .......................................................... 21

SA-CD (Super Audio CD)............................................. 22

Playing a disc.................................................................. 22

Sound mode – SA-CD playback..................................... 22

Audio CD.......................................................................23

Playing a disc.................................................................. 23

Video CD and Super Video CD ....................................23

Playing a disc.................................................................. 23

Playback Control (PBC)................................................. 23

MP3 ...............................................................................24

MP3 disc features ........................................................... 24

Playing a disc.................................................................. 24

Choosing an Album/Track to playback.......................... 24

MP3 text ......................................................................... 24

JPEG ..............................................................................25

JPEG disc features.......................................................... 25

Playing a disc.................................................................. 25

Slide show setting........................................................... 25

Rotating the image.......................................................... 25

General features.............................................................26

Moving to another segment............................................ 26

Search ............................................................................. 26

Slow motion.................................................................... 26

Still picture and frame-by-frame playback..................... 26

Time search .................................................................... 26

Repeat ............................................................................. 27

Repeat A-B .................................................................... 27

Shuffle ............................................................................ 27

Scan ............................................................................... 27

Zoom .............................................................................. 27

FTS video/audio program............................................... 28

Activating/deactivating the FTS program ...................... 28

Erasing a track/chapter/index from the FTS list............. 28

Erasing all tracks/chapters/indexes from the FTS list .... 28

Disc lock ....................................................................... 28

Activating/deactivating Disc lock .................................. 28

Authorizing discs............................................................ 28

Deauthorizing discs ........................................................ 29

Parental Control ............................................................29

Activating/deactivating Parental Control ....................... 29

Country ........................................................................... 29

Changing the four-digit PIN..........................................29

If you forget your four-digit code................................... 29

Introduction 2

Functional Overview 5

Preparation 8

On-screen menu 12

Operation 20

Troubleshooting 30

Specifications 31

Table of Contents

Introduction

Thank you for purchasing the YAMAHA DVD

AUDIO/VIDEO SA-CD player. This Owner’s Manual

explains its basic operations.

Manufactured under license from

Dolby Laboratories.

“Dolby”, “Pro Logic”, and the

double-D symbol are trademarks of

Dolby Laboratories.

“DTS” and “DTS Digital Surround”

are registered trademarks of Digital

Theater Systems, Inc.

“DCDi” is a trademark of Faroudja, a

division of Genesis Microchip, Inc.

HDMI, the HDMI logo and High-

Definition Multimedia Interface are

trademarks or registered trademark of

HDMI Licensing LLC.

This product incorporates copyright protection

technology that is protected by method claims of certain

U.S. patents and other intellectual property rights owned

by Macrovision Corporation and other rights owners.

Use of this copyright protection technology must be

authorized by Macrovision Corporation, and is intended

for home and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

“i.LINK” and the “i.LINK” logo are trademarks of

Sony Corporation.

This product complies with the following i.LINK

interface specifications:

1. IEEE Std 1394a-2000, Standard for a High

Performance Serial Bus

2. Audio and Music Data Transmission Protocol 2.1

Following the standard for AM824 sequence adaptation

layers, the product is compatible with IEC60958

bitstream, DVD-A and SA-CD media.

This unit can play the disc types associated with the

logos shown below. (Do not attempt to load any other

type of disc into the unit, or the unit may be damaged.)

This manual refers to disc types using the following

symbols:

*1 icon includes Super Video CD.

Notes:

– This unit is designed for use with SA-CD, DVD-

Video, DVD-Audio, Video CD, Super Video CD,

Audio CD, CD-R and CD-RW (MP3 and JPEG

supported), DVD+R and DVD+RW, DVD-R and

DVD-RW.

– CD-R and CD-RW discs cannot be played unless they

have been finalized.

– DVD+R and DVD+RW discs cannot be played

unless they have been finalized.

– DVD-R and DVD-RW discs must be recorded in

Video format and must be finalized.

– Some discs cannot be played depending on disc

characteristics or recording conditions.

– Be sure to use only CD-R and CD-RW discs from

reliable manufacturers.

– Dolby Digital, DTS Digital Surround, and MPEG

digital audio are supported.

– PAL and NTSC are supported.

– This unit features the PAL and NTSC video system

converting function to allow you watching the

different types of video discs on one TV (see “TV

System (NTSC/PAL conversion)” on page 15).

– Do not use any non-standard shaped discs (heart,

etc.).

– Do not use discs that have tape, scales, or paste on

them or damage to the unit may result.

– Do not use discs with surfaces printed by a

commercial label printer.

– Some DVD discs require specific features or allow

only limited function during playback.

– Prohibited mark may appear on the TV screen to

indicate that a function is unavailable.

– Photo CD, CD-ROM, DVD-ROM, DVD-RAM, CDV

and nonstandard CD discs cannot be played on this

unit.

Patent information

Playable disc formats

VIDE

SUPER VIDE

DVD-Audio DVD-Video Video CD

SA-CD

(Super Audio CD)

Audio CD MP3

DVD-A

DVD-V

VCD

SA-CD

MP3

VCD

English

Introduction

The unit is designed to support the Region Management

System. Check the regional code number on the disc

package. If the number does not match the unit’s region

number (see table below, or see back of unit), the unit

may be unable to play the disc.

Check your package to make sure it contains the

following items:

Insert the batteries in the correct direction by aligning

the “+” and “–” marks on the batteries with the polarity

markings “+” and “–” inside the battery compartment.

1 Remove the back cover.

2 Insert the two supplied batteries (AA, R6, UM-3) into

the battery compartment.

3 Close the back cover.

Replace worn batteries

Worn batteries limit the operating range of the remote

control. Replace both batteries at the same time.

• Replace both batteries if you notice a decrease in the

operating range of the remote control.

• Do not use old batteries with new ones.

• Do not use different types of batteries (such as

alkaline and manganese) together. Read the battery

packaging carefully. Different types of batteries may

be the same shape or color.

• If the batteries leak, dispose of them immediately.

Avoid touching the leaked material or letting it come

into contact with clothing, etc. Clean the battery

compartment thoroughly before installing new

batteries.

Region management

information

Model

Region

number of

the unit

Discs that can be

played (Example)

U.S.A. model

U.K. and

Europe models

Supplied accessories

1 1

ALL

2 2

ALL

Remote control Batteries (x2) (AA, R6, UM-3)

Audio/Video cable Power cable

Installing batteries in the

remote control

Introduction

Handling the remote control

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following types of conditions:

– high humidity such as near a bath

– high temperature such as near a heater or stove

– extremely low temperature

– dusty places

Cleaning the cabinet

• Use a soft cloth slightly moistened with a mild detergent

solution. Do not use a solution that contains alcohol,

spirits, ammonia or abrasives.

Cleaning discs

• When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center out. Do not wipe in

a circular motion.

• Do not use solvents such as benzene, thinner,

commercial cleaners, or anti-static spray designed for

analog records.

Using the remote control

Maintenance

Point the remote control at the

sensor, within approximately 6 m

(20 feet) of the unit.

Remote control

sensor

English

Functional Overview

Front panel

STANDBY/ON

–turns on this unit or sets it to the

standby mode

Disc tray

–moves to the previous chapter or track

–moves to the next chapter or track

s STOP

– stops playback

e PAUSE

– pauses playback

p PLAY

– starts playback

DVD-AUDIO indicator

–lights up when the unit detects DVD-Audio

signals

SA-CD indicator

–lights up when the unit detects SA-CD signals

MULTI CH indicator

–lights up when you play multi-channel audio

source

HDMI indicator

–lights up when the unit is capable of outputting

signals from the HDMI (High Definition

Multimedia Interface) terminal

i.LINK indicator

–lights up when an AV receiver selects i.LINK

(IEEE1394)

Front panel display

– shows information about the

operational status of the unit

PROGRESSIVE indicator

– lights up when the unit enters

PROGRESSIVE mode

AUDIO DIRECT indicator

– lights up when you enter the AUDIO

DIRECT mode by pressing the AUDIO

DIRECT button on the remote control

during audio disc playback

DOWN MIX indicator

– lights up when you play the discs that

allow down mixing of the multi-channel

audio sources

OPEN/CLOSE

– opens or closes the disc tray

Functional Overview

Remote control connectors are used in custom installations to transmit remote control signals via cable.

• Connect REMOTE CONTROL IN to an output on your remote control system.

• Connect REMOTE CONTROL OUT to a remote control input on another component to enable system control.

This unit is also equipped with RS-232C terminal. Consult your dealer for details.

Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause

permanent damage to the unit.

Rear panel

HDMI output terminal

–connect to the HDMI jack on a

HDMI-compatible AV component

SCAN MODE switch

–switches the component video output

signals between progressive and

interlace

COMPONENT video jacks

–connect to an AV receiver with Y P

R inputs

RS-232C terminal

– use as an expansion terminal for commercial use

Consult your dealer for details

REMOTE CONTROL connectors

– use in custom installations to transmit remote

control signals via cable connections

i.LINK connectors

– connect to the i.LINK jack on an

i.LINK-compatible component

COAXIAL digital audio output

–connect to the audio input jack on

digital (coaxial) audio equipment

S VIDEO output

–connect to an S-Video input jack on

your AV receiver

VIDEO output (composite video

out)

–connect to the video input jack on your

AV receiver

OPTICAL digital audio output jack

– connect to the audio input jack on digital

(optical) audio equipment

MIXED 2CH audio output jacks

– connect to audio inputs on your AV receiver

or stereo system

6CH DISCRETE audio output jacks

– connect to an AV receiver with 6-ch discrete

audio input jacks

AC IN (Main-inlet)

– connect to a standard AC outlet

Remote control connectors

and RS-232C terminal

English

Functional Overview

* Press and hold button for about two seconds.

Remote control

– turns the power of this unit ON or

enters standby mode

0-9 numeric buttons

SUBTITLE

– selects subtitle languages

AUDIO

– selects audio languages and formats

ANGLE

– selects DVD camera angles

ZOOM

– enlarges video images

RETURN/RESUME

– displays the previous menu or

resumes playback

knlh

– (left/right/up/down) selects an item

in the menu

ENTER/OK

– acknowledges menu selection

– accesses the menu of a DVD disc

– searches backward*/accesses a

previous chapter or track

– searches forward*/accesses the

next chapter or track

DIMMER

–adjusts the display brightness

AUDIO DIRECT

–switches video output on and off

during audio disc playback

SOUND MODE

–selects the required sound mode

• for SA-CD: CD, Stereo, or Multi-

channel (if available)

• for DVD/VCD: Stereo, Dolby

Surround compatible, 3D sound, or

Multi-channel

PAGE

–turns pages of the DVD-Audio still

pictures

TITLE/CHAP

–selects title or chapter

STATUS

– displays current playback information

on the front panel display and on the

status window on screen

ON SCREEN

–accesses or removes the player’s On-

screen menu

STOP (s)

–stops playback

PLAY (p)

–starts playback

PAUSE (e)

–pauses playback temporarily/

frame-by-frame playback

SCAN

–plays the first 10 seconds of each

track/chapter within a disc

REPEAT

–repeats chapter, track, title, disc, etc.

A-B

–repeats a specific segment

SHUFFLE

–plays tracks/chapter in random order

PROG

–turns program playback on or off

• available only when a programmed

playlist has been created

Preparation

• There are various ways to connect the player, depending

on the equipment you wish to use. The following

drawings illustrate some possible configurations.

• Please refer to manuals for other equipment as necessary

to ensure that you make the correct connections.

• Do not connect the player via your VCR. The video

quality could be distorted by the copy protection system.

• Do not connect the player’s audio output jack to the

phono input jack on your audio system.

Digital audio connections

This unit features COAXIAL and OPTICAL digital

output jacks. Connect one or both of them to digital

input jacks of an AV receiver. You can also enjoy high-

quality stereo sound at sampling frequencies of 88.2 and

96 kHz, assuming the material is not copy-protected and

the equipment you connect is compatible with these

signals.

Notes:

– If the audio format of the digital output does not

match the capabilities of your receiver, the receiver

will produce a strong, distorted sound or no sound at

all. Make sure to select the appropriate audio format

on the disc menu screen. Pressing AUDIO once or

more may change not only the audio language but

also the audio format. The selected format name will

be displayed for several seconds in the status

window.

– SA-CD audio signal is not output from DIGITAL

OUT jacks.

– If you wish to enjoy Dolby Digital, DTS, and MPEG

you must connect this unit to the AV receiver that

support those.

i.LINK components connections

Use an i.LINK connection cable of approximately

3m (10 feet) or less to connect this unit to i.LINK-

compatible components (refer to page 18 for details).

Analog audio (6CH DISCRETE)

connection

Connect a receiver with multi-channel audio input

terminals to enjoy surround sound with no sampling

frequency limitation. We recommend this connection to

obtain maximum performance of SA-CD discs and

DVD-Audio multi-channel sound.

Audio connection

COAXIAL

OPTICAL

AV receiver

Insert

fully, with

this side

facing up.

FRONT

SURROUND

CENTER

SUBWOOFER

AV receiver

English

Preparation

Analog audio (MIXED 2CH)

connection

Use the audio cable supplied with the player to connect

AUDIO OUT L (left) and R (right) jacks of the player to

the corresponding input jacks on your audio equipment,

such as an AV receiver.

If your AV receiver features video output jacks, connect

this unit to the AV receiver (and then to your TV). This

enables you to use one TV for several different video

sources (LD, VCR etc.) by simply switching the input

source selector on your AV receiver.

This unit features three types of video output jacks

(Component, Video and S-Video). Connect the

appropriate video output jack to your equipment.

HDMI component connections

Use the HDMI connection cable to connect this unit to

HDMI-compatible components.

Note:

– You can use a HDMI to DVI conversion cable to

connect this unit to DVI HDCP compatible

components. In this case, no audio signals are output

from this unit’s jacks.

Video connections

DVD/CD

R L

AV receiver

COMPONENT IN

S VIDEO

VIDEO

YPB/CB PR/CR

VIDEO

OUT

VIDEO

S VIDEO OUT

S VIDEO

COMPONENT IN

COMPONENT OUT

B/CB PR/CR

B/CB

PR/CR

AV receiver

S VIDEO

VIDEO

COMPONENT IN

SUB

Projector

Preparation

SCAN MODE selector

This selector switches the type of output signal from the

COMPONENT video jacks on this unit.

INTERLACE:

Select INTERLACE if you are connecting the

component to a standard (interlace format) TV.

PROGRESSIVE:

Select PROGRESSIVE if your TV accepts NTSC

progressive or PAL progressive signals. This setting

will enable you to enjoy accurate color reproduction and

high quality images. This unit features DCDi circuit.

The PROGRESSIVE indicator on the front panel lights

up during progressive playback.

Notes:

– In the PROGRESSIVE mode, 4:3 aspect images are

stretched horizontally on the wide screen TV. We

recommend to change the TV screen’s aspect ratio

settings for progressive signals if you wish to watch

the original aspect ratio images without distortion.

You can also change the aspect ratio settings in the

[4:3 Aspect] parameter in the On-screen menu.

– Some TVs and projectors are not compatible with this

unit. If you notice picture distortion when outputting

the progressive signals, switch the SCAN MODE

selector to INTERLACE.

1 Connect the AC power cord to the power outlet.

2 Switch on the TV and this unit.

3 Set the TV to the correct Video IN channel. (e.g. EXT1,

EXT2, AV1, AV2, AUDIO/VIDEO, etc. Refer to your

TV owner’s manual for detail.)

➜ The front panel display lights up and the default

screen appears on the TV.

4 If you are using an external equipment (e.g. audio

system or receiver), turn them on and select the

appropriate input source that was used to connect to this

unit. Refer to the equipment owner’s manual for detail.

Note:

– If you do not have a proper picture or sound, refer to

“Troubleshooting” section.

We recommend to setup some of the basic menu items

before the initial playback.

1 Press STANDBY/ON to turn on the unit.

2 Press ON SCREEN.

➜ On-screen menu is displayed on the screen.

3 Follow the procedure described below to set the

following menu items.

CONSUMERS SHOULD NOTE THAT NOT ALL

HIGH DEFINITION TELEVISION SETS ARE

FULLY COMPATIBLE WITH THIS PRODUCT

AND MAY CAUSE ARTIFACTS TO BE

DISPLAYED IN THE PICTURE. IN CASE OF 525

OR 625 PROGRESSIVE SCAN PICTURE

PROBLEMS, IT IS RECOMMENDED THAT THE

USER SWITCH THE CONNECTION TO THE

“STANDARD DEFINITION” OUTPUT. IF THERE

ARE QUESTIONS REGARDING OUR VIDEO

MONITOR COMPATIBILITY WITH THIS

MODEL 525P AND 625P DVD PLAYER, PLEASE

CONTACT OUR CUSTOMER SERVICE CENTER.

This unit is compatible with the complete line of

YAMAHA products, including the projectors

DPX-1000, DPX-1100, LPX-500, LPX-510, the

plasma monitor PDM-1 and PDM-4210.

Switching on

Setups before the initial

playback

ON SCREEN

English

Preparation

1Menu Language (see page 17)

You can select the language displayed in the On-screen

menu.

1 Go to [Menu Language] (Setup ➔ Language ➔ Menu

Language) by using knlh buttons on the remote

control, then press h.

➜ Choices are displayed on the right column.

2 Select a language to be displayed in the On-screen menu

by using kn buttons.

3 Press l to return to the previous menu.

2Default Audio (see page 17)

You can select the audio language spoken in video discs.

Available choices are determined by the disc.

1 Go to [Default Audio] (Setup ➔ Language ➔ Default

Audio) by using knlh buttons on the remote

control, then press h.

➜ Choices are displayed on the right column.

2 Select a language by using kn buttons.

3 Press l to return to the previous menu.

3Default Sub-title (see page 17)

You can select the subtitle language set as default.

Available choices are determined by the disc.

1 Go to [Default Sub-title] (Setup ➔ Language ➔ Default

sub-title) by using knlh buttons on the remote

control, then press h.

➜ Choices are displayed on the right column.

2 Select a default subtitle language by using kn buttons.

3 Press l to return to the previous menu.

4TV shape (see page 15)

You can select the aspect ratio of the video displayed on

the TV monitor.

Select [Widescreen] if you connect to a wide-screen

monitor. If you connect to a conventional monitor,

select [4:3 panscan] (the left and right sides are trimmed

when you play 16:9 video) or [4:3 letterbox] (black

areas appear at the top and bottom when you play 16:9

video).

1 Go to [TV shape] (Setup ➔ TV ➔ TV shape) by using

knlh buttons on the remote control, then press h.

➜ Choices are displayed on the right column.

2 Make a choice by using kn buttons.

3 Press l to return to the previous menu.

5Analog output (see page 16)

Enables you to specify the type of analog output suitable

for your AV receiver. Select [Multi-channel] if you are

using a multi-channel AV receiver with 6-ch discrete

inputs. If your AV receiver does not have 6-ch discrete

inputs, select one of [Stereo], [Dolby Surr Compat], or

[3D sound].

1 Go to [Analog output] (Setup ➔ Audio Menu ➔ Analog

output) by using knlh buttons on the remote

control, then press h.

➜ Choices are displayed on the right column.

2 Select an item for the analog output signal by using kn

buttons.

3 Press l to return to the previous menu.

6Digital output (see page 16)

Enables you to specify the type of digital output suitable

for your AV receiver. Select [PCM only] if your AV

receiver is not capable of decoding multi-channel audio.

Select [All] if you connected this unit’s digital out jacks

to a multi-channel AV receiver.

1 Go to [Digital output] (Setup ➔ Audio Menu ➔ Digital

output) by using knlh buttons on the remote

control, then press h.

➜ Choices are displayed on the right column.

2 Select an item for the digital output signal by using kn

buttons.

3 Press l to return to the previous menu.

Notes:

– Press ON SCREEN again to exit from the On-screen

menu.

– You can find the selection of the helpful menu items

in [Preference] and [Setup].

Go to [Preference] if you want to customize this unit

for your personal requirement such as the Wake-up

timer.

Go to [Setup] if you want to set the operational status

of this unit.

On-screen menu

The On-screen menu enables you to customize this unit

to suit your requirements.

1 Press ON SCREEN on the remote control.

➜ The On-screen menu appears on the screen.

2 Press knlh to navigate the On-screen menu and to

change the settings.

3 Press ON SCREEN to exit from the On-screen menu.

Features

Dimmer

Adjusts the brightness of the front panel display.

You can use this function if the brightness of the front

panel display disturbs your enjoyment of the home

theater.

Choices: Low, Medium, Normal

Initial setting: Normal

Wake up timer

Turns on the player from standby mode after a preset

amount of time. The timer is then reset to zero. You can

set the timer for up to 600 minutes.

Choices: 0 to 600 minutes

Initial setting: 0

Status window

Displays the current status of the player. Select [Off] to

suppress display of the Status window.

Choices: On, Off

Initial setting: On

Adv.Picture

Allows you to fine-tune the following video parameters.

4:3 Aspect

You can adjust the aspect ratio of the projected images

on the screen. This function is only available for

progressive scan and HDMI video output.

Select [NL_Stretch] for display of 4:3 image on the 16:9

screen with non-linear stretching (Center position of

screen is stretch less than the side).

Select [4:3 PillarBox] to display 4:3 image on the 16:9

screen without stretching. Even when playing a disc

recorded in the 16:9 squeeze mode, the picture is

displayed in the center of the screen.

No aspect ratio adjustment is made when [Auto] is

selected.

We recommend setting the aspect ratio on your TV if the

function is available.

Choices: 4:3 PillarBox, NL_Stretch, Auto

Initial setting: Auto

TrueLife

Produces more dynamic picture by increasing the

picture contrast and the color intensity. This function is

available for progressive scan output only.

Choices: 0 to +7

Initial setting: 0

DCDi

DCDi (Directional Correction Deinterlacing) computes

and tracks the angle of the screen edge to fill in the

missing pixel on the TV screen. DCDi will optimize the

image quality significantly, especially during the slow

motion playback. This function is available for

progressive scan output only.

Choices: On, Off

Initial setting: On

Chroma Delay

The chroma (color) and luminance (brightness) signals

are not synchronized. The Chroma Delay setting allows

you to adjust the advance delay of the chroma signal to

yield a perfectly clear picture. This function is available

for signals output from COMPONENT video jacks

only.

Choices: –3 to +3

Initial setting: 0

Gamma

Enables you to adjust the intensity of the picture non-

linearly. A positive value enables you to bring out low

level detail in dark scenes, while a negative value

emphasizes contrast. This function is available for

signals output from COMPONENT video jacks only.

Choices: –7 to +7

Initial setting: 0

General operation

Preferences

Toolbar

Setup

Toolbar

Program

View

Play Option

Slide Show

English

On-screen menu

HDMI Video

Enables you to adjust the resolution depending on the

monitor you are using. You can use this function only

when the HDMI output terminal is connected to a

HDMI-compatible component.

Choices: 480p, 576p, 720p, 1080i, Auto

Initial setting: 480p

Setting Examples

*: Refer to the instruction manual of the monitor and

choose an appropriate aspect ratio.

*1: The HDMI video output may not be displayed

properly if the HDMI-compatible monitor you are using

does not support the selected resolution setting.

To return to the initial setting, you must first stop

playback and eject the disc, then press “PLAY” ➔ “0”

➔ “2” ➔ “9” ➔ “STOP” on the remote control.

*2: If the desired aspect ratio is not available, select the

most suitable setting from [AUTO], [4:3 PillarBox] and

[NL_Stretch].

Notes:

– While HDMI video signals are being output,

component video output is unavailable.

– When a video setting is modified, the picture may not

be displayed for several seconds.

– When the image conversion (PAL ↔ NTSC) begins,

the picture may not be displayed for several seconds.

Picture

Video shift

Adjusts the position of the image on the screen by

scrolling it to the left or right.

Choices: +1 to +7

Initial setting: +4

Saturation

Adjusts the video color saturation. This function is not

available for signals output from COMPONENT video

jacks and HDMI video signals.

Choices: –7 to +7

Initial setting: 0

Contrast

Accentuates bright and dark parts of the video. This

function is not available for signals output from

COMPONENT video jacks and HDMI video signals.

Choices: –7 to +7

Initial setting: 0

Picture Mode

Adjusts the color tone to suit your preference and the

playing source. [Personal] will be chosen automatically

when you change the value in the following menus:

[Saturation], [Contrast], [Brightness], and [Sharpness].

This function is not available for signals output from

COMPONENT video jacks and HDMI video signals.

Choices: Rich, Natural, Soft, Animation, Personal

Initial setting: Natural

Brightness

Adjusts the overall brightness of the picture. This

function is not available for signals output from

COMPONENT video jacks and HDMI video signals.

Choices: –7 to +7

Initial setting: 0

Sharpness

Adjusts the sharpness of the video.

Choices: 0 to +7

Initial setting: 0

Sound

Karaoke vocal

Enables you to play multi-channel karaoke DVDs. The

karaoke channels on the disc will be mixed into normal

stereo when you choose [On].

Choices: On, Off

Initial setting: Off

ClearVoice

Increases the relative volume of dialog for easy listening

at night. This function is available for only certain multi-

channel discs.

Choices: On, Off

Initial setting: Off

HDMI Video Functions

480p

Select the desired resolution for the

monitor you are using. *1

576p

720p

1080i

Auto

The resolution is automatically selected

to match the monitor you are using.

Monitor

shape

Playback

disc

TV shape 4:3 aspect

16:9

(Projector)

Squeezed 16:9

video

Widescreen Auto

4:3 video Widescreen

4:3 PillarBox

4:3

Squeezed 16:9

video

4:3 panscan

4:3 letterbox

–

4:3 video

4:3 panscan

4:3 letterbox

–

On-screen menu

Night mode

When set to [On], the dynamics of the sound output is

optimized. High volume output is softened, enabling

you to watch your favorite action movie without

disturbing others.

Choices: On, Off

Initial setting: Off

Program

You can create your own playlist using this menu. First,

go to [Tracks], then select the tracks/chapters, etc. to

include in your playlist. The programmed playlist will

be activated when you choose [On] in the [Program]

menu.

Clear all

Deletes all Programmed contents.

Program

Set the FTS program playback on or off.

Choices: On, Off

Initial setting: Off

Tracks

Selects tracks and chapters for your FTS list.

Playlist

Shows the programmed FTS list.

Note:

– For details about FTS and the settings of [Program]

menu items, see the descriptions followed by “FTS

video/audio program” on page 28.

View

Rotate

Rotates a JPEG image.

Choices: –180°, –90°, 0, +90°, +180°

Initial setting: 0

Zoom

Activates the zoom function. A cursor will be displayed

on screen. Move the cursor using the knlh buttons,

then select a size by pressing the ENTER button

repeatedly. To exit zoom mode, press RETURN/

RESUME repeatedly until the cursor disappears from

the screen.

Chapter preview

Plays the first 10 seconds of each chapter/track on the

disc. Pressing SCAN on the remote control performs the

same function as well.

Choices: On, Off

Initial setting: Off

Angle

Some DVD discs feature a multiple angle function,

enabling you to watch certain scenes from various

angles. Function availability and the number of camera

angles vary according to the disc.

Page

Turns pages of DVD-Audio still images.

Play option

DVD Video Mode

Some DVD-Audio discs include DVD-Video contents

that can be played on conventional DVD-Video players.

To play such contents, select [On]. The setting returns to

[Off] when you eject a disc or turn the unit to standby

mode.

Choices: On, Off

Initial setting: Off

Audio

Selects the sound format and audio language. Available

choices are determined by the disc.

Disc Navigation

You can direct to a track, etc. by using this menu.

Subtitle

Selects the subtitle language. Available choices are

determined by the disc.

Frame by Frame

Advances or reverses one frame at a time. This function

is available for video discs only. Previous frame is not

available for VCD and SVCD.

Fast

Selects a speed for fast forward or fast reverse playback.

Choices: –32, –8, –4, +1, +4, +8, +32

Initial setting: +1

Time

You can move to a certain spot by indicating the elapsed

time.

Slow

Selects a speed for the slow forward or slow reverse

playback.

Choices: –1, –1/2, –1/4, –1/8, 0, +1/8, +1/4, +1/2, +1

Initial setting: 0

Toolbar

English

On-screen menu

Slide Show

Use this feature for JPEG slide show playback.

Picture time

Sets the duration for each image.

Choices: Slow, Medium, Fast

Initial setting: Medium

Access

Disc lock

This function enables you to restrict others from

accessing certain discs.

If this setting is on, you need to enter the four-digit PIN

to modify the [Access] menu settings before you can

play the disc.

Choices: On, Off

Initial setting: Off

Change PIN

Enables you to change the four-digit PIN.

To change the four-digit PIN, enter the current PIN first,

then enter the new four-digit PIN.

Enter PIN

Enter the four-digit PIN to unlock the disc or to display

the [Access] menu.

Parental level

DVD movies may contain scenes that are unsuitable for

children. Therefore, some discs contain parental control

information that may apply to the entire disc or to

certain scenes. Ratings are country-specific. You can

specify a country code in the On-screen menu (Setup ➔

Language ➔ Country). See “Country” on page 29.

Choices: 0 to 8

Initial setting: 0

Country

Selects a country to apply its rating system to Parental

Level control.

Features

PBC

A VCD menu screen is displayed when this setting is on.

Choices: On, Off

Initial setting: On

Sleeptimer

Places this unit in standby mode when playback is

stopped and this unit is not operate for 20 minutes.

Choices: On, Off

Initial setting: Off

TV shape

If you connect to a conventional 4:3 aspect TV, select

[4:3 panscan] (the left and right sides are trimmed when

you play 16:9 video) or [4:3 letterbox] (black areas

appear at the top and bottom when you play 16:9 video).

Select [Widescreen] if you connect to a Wide-Screen

TV.

Choices: 4:3 panscan, 4:3 letterbox, Widescreen

Initial setting: 4:3 panscan

TV System (NTSC/PAL conversion)

Allows you to select [PAL], [NTSC] or [Auto] mode to

match your TV system. You can play PAL discs on

NTSC monitor, and NTSC discs on PAL monitor. The

initial setting is [NTSC].

Choices: PAL, NTSC, Auto

The following conversions are supported.

Notes:

– In progressive scan mode, the output signals from the

VIDEO and S VIDEO jacks are same as the format of

the disc you play.

– Some image distortion occurs when switching the

NTSC and PAL mode.

– If your TV does not accept the selected mode while

you change the [TV System] setting, the screen will

be distorted so that you cannot recognize the On-

screen menu. When it occurs, you can change the

[TV System] settings by the remote control

operations. Follow the procedures below.

• Choosing [PAL]:

Press “PLAY” ➔ “2” ➔ “5” ➔ “6” ➔ “PLAY”

on the remote control.

• Choosing [NTSC]:

Press “PLAY” ➔ “2” ➔ “5” ➔ “7” ➔ “PLAY”

on the remote control.

Do not perform this operation while playing back a

disc on this unit.

Setup

Disc

Format

Output format

Selected mode

NTSC PAL AUTO

NTSC NTSC PAL NTSC

PAL NTSC PAL PAL

Widescreen

4:3 letterbox

4:3 panscan

On-screen menu

Audio Menu

Digital output

Enables you to specify the type of digital output that best

suits your AV receiver or HDMI monitor/receiver.

Select [PCM only] if your receiver or HDMI monitor/

receiver is not capable of decoding multi-channel audio.

Select [All] if you connected this unit’s digital out jacks

to a multi-channel decoder/receiver.

Choices: Off, PCM only, All

Initial setting: All

Note:

– SA-CD audio signal is not output from DIGITAL

OUT jacks.

Analog output

Enables you to specify the type of analog output suitable

for your AV receiver.

Choices: Stereo, Dolby Surr Compat, 3D sound,

Multi-channel

Initial setting: Multi-channel

Stereo:

In this setting, the multi-channel audio is down-

mixed to a stereo signal. Select this setting when

connecting to a TV, stereo amplifier/receiver, etc.

Dolby Surr Compat:

Select this setting when using

equipment with a Dolby Surround Pro Logic decoder. In

this setting, the multi-channel audio (Dolby Digital,

MPEG-2, DTS) is downmixed to a Dolby Surround

compatible 2-ch output. SA-CD and PCM signals with

a sampling frequency of over 88.2 kHz are downmixed

to normal stereo.

3D sound:

In a setup without rear speakers (analogue

stereo output), 3D Sound remixes the six channels of

digital surround (except for SA-CD and PCM signals

with a sampling frequency of over 88.2 kHz) into a two

speaker output while retaining all of the original audio

information. The result is the sensation of being

surrounded by multiple speakers.

Multi-channel:

Select this setting when using a multi-

channel AV receiver with 6-ch discrete inputs. The

multi-channel audio signals those of like DVD-Audio,

DVD-Video, and SA-CD are output from the respective

6-ch discrete output jacks. In this mode, this unit will

perform DTS decoding, Dolby Digital 5.1-channel

decoding, or MPEG Multichannel decoding when

applicable, and Dolby Pro Logic II decoding on 2-ch

sound tracks except for SA-CD and PCM signals with a

sampling frequency of over 88.2 kHz.

PCM output

Enables you to select PCM digital output at 48 kHz or

96 kHz. If you select [48 KHz], PCM data will be

converted to 2-ch 48 kHz or less. Select [48 KHz] if the

connected equipment cannot process signals with a

sampling frequency of 96 kHz or 88.2 kHz.

Choices: 96 KHz, 48 KHz

Initial setting: 96 KHz

Notes:

– Signals are converted to either 48 kHz or 44.1 kHz

despite the above settings if the disc has copy

protection.

– If you select [96 KHz], signals with a sampling

frequency of over 96 kHz are converted to 2-ch

88.2 kHz or 96 kHz.

SA-CD Direct

Enables you (with a suitable speaker system) to bypass

the bass management system for multi-channel SA-CD

playback, so you can enjoy the pure SA-CD quality.

Choices: On, Off

Initial setting: Off

Note:

– When [SA-CD Direct] is [On], the speaker settings

will not be applied during SA-CD playback.

HDMI Audio

If you are not using HDMI audio output, you should set

this to [Off].

If the monitor/receiver connected to this unit using

HDMI does not support HDMI audio signal input, set

this to [Off].

Choices: On, Off

Initial setting: Off

Notes:

– Super Audio CD signals cannot be output using

HDMI.

– This unit can output the following audio signals using

HDMI: 32/44.1/48 kHz, 2-ch PCM signals and

bitstream signals (Dolby Digital, DTS and MPEG).

PCM signals with a sampling frequency of over

88.2 kHz are converted to 2-ch 48 kHz or 44.1 kHz.

– When audio signals are being output by a HDMI-

component, digital output signals are muted.

English

On-screen menu

Language

Enables you to select a language for audio, subtitles,

On-screen menus or DVD menus. The selected

languages will be used for all discs, until you modify

your settings.

If the selected language is not available on the disc, the

default language designated by the disc will be applied.

Default sub-title

Selects a default subtitle language. This setting also

applies to DVD menu items.

Menu Language

Selects a language for the On-screen display.

Default Audio

Selects a default audio language.

Speakers

Use this menu to specify speaker size, on/off status, and

speaker distance to optimize your listening

environment.

Placing all speakers except for the subwoofer at equal

distances from the listener is the most ideal way of the

speaker positioning in 5.1 channel system. Set the

following menu items to create the better listening

environment.

You can use the following 8 settings to select the size

and layout for your speakers.

Notes:

– These settings are effective only on analog output

signals.

– When playing DVD-Audio with a sampling frequency

of over 88.2 kHz, all speaker sizes are set to [Large]

and the subwoofer is set [On], regardless of the

settings you adjusted.

Front Distance

Sets the distance from your listening place to the front

speakers. We recommend to place the front left speaker

and right speaker at the same distance from the listening

point.

Choices: 1 to 12 m

Initial setting: 1.9 m

Center Distance

Sets the distance from your listening place to the center

speaker.

Choices: Varies depending on the [Front Distance]

setting.

Initial setting: 1.9 m

Note:

– The available range of choice differs depending on

the [Front Distance] setting.

Rear Distance

Sets the distance from your listening place to the rear

speakers. We recommend to place the rear left speaker

and rear right speaker at the same distance from the

listening point.

Choices: Varies depending on the [Front Distance]

setting.

Initial setting: 1.9 m

Note:

– The available range of choice differs depending on

the [Front Distance] setting.

Front Size

Specifies the front speaker size.

Choices: Large, Small

Initial setting: Large

Center Size

Specifies the center speaker size.

Choices: Large, Small, Off

Initial setting: Large

Speaker Size / Layout

Front Center Surround Subwoofer

Large Large Large On

Small Off Off On

Small Small Small On

Large Off Off Off

Large Small Small Off

Large Off Small Off

Large Small Off Off

Large Small Small On

L R

Center

Distance

Front Distance

Rear Distance

On-screen menu

Surround Size

Specifies the surround speaker size.

Choices: Large, Small, Off

Initial setting: Large

Subwoofer

If you wish to use a subwoofer, select [On]. Otherwise

select [Off].

Choices: On, Off

Initial setting: On

Note:

– You may not be able to make settings that match your

speaker layout.

DVD/CD Mode

Adjusts the volume of each speaker for audio playback

(excluding SA-CDs). If you adjust the volume level for

any speaker, the volume level for the other speakers is

adjusted accordingly.

Front R Vol

Choices: –6 to +6

Initial setting: 0

Front L Vol

Choices: –6 to +6

Initial setting: 0

Center Vol

Choices: –6 to +6

Initial setting: 0

Surround R Vol

Choices: –6 to +6

Initial setting: 0

Surround L Vol

Choices: –6 to +6

Initial setting: 0

Subwoofer Vol

Choices: –6 to +6

Initial setting: 0

SA-CD Mode

You can adjust the volume level output from each

channel for SA-CD playback.

You must choose Multi-channel for Analog output to

make this function available. (See “Analog output” on

page 16.)

If you adjust the volume level for any speaker, the

volume level for the other speakers is adjusted

accordingly.

Cut-off frequency

Cut off frequency adjustment for a subwoofer.

Choices: 60, 80, 100, 120 (Hz)

Initial setting: 120 (Hz)

Slope

Filter slope adjustment for a subwoofer.

Choices: 12, 18, 24 (dB/oct)

Initial setting: 12 (dB/oct)

Front R Vol

Choices: –6 to +6

Initial setting: 0

Front L Vol

Choices: –6 to +6

Initial setting: 0

Center Vol

Choices: –6 to +6

Initial setting: 0

Surround R Vol

Choices: –6 to +6

Initial setting: 0

Surround L Vol

Choices: –6 to +6

Initial setting: 0

Subwoofer Vol

Choices: –6 to +6

Initial setting: 0

i.LINK

You only need to make this setting if you connected this

player to an i.LINK-compatible component. Connected

components must be DTCP (Digital Transmission

Content Protection)-compliant in order to play DVD

audio and Super Audio CD signals received via i.LINK.

Notes:

– This unit supports i.LINK (AUDIO), allowing you to

transfer audio signal information to other

components compatible with i.LINK (AUDIO).

However, because this unit does not support

i.LINK (VIDEO), you cannot transfer video

information to other components.

– Do not disconnect i.LINK cables or switch off any

components connected using i.LINK while this player

is turned on.

– Copy-protected 96 kHz DVD-Video discs are

downsampled to 48 kHz when using an i.LINK

connection.

–

You can connect up to 16 i.LINK components to this unit.

Audio Output

Change this setting to [Off] if an i.LINK-compatible

component is still connected but you do not want to

output signals using i.LINK. Reset to [On] to use the

i.LINK interface.

Choices: On, Off

Initial setting: On

Note:

–

When audio data is transferred via an i.LINK connection,

analog, digital and HDMI audio signals are muted.

English

On-screen menu

Connection Status

This screen shows components connected using the

i.LINK interface, and the transfer capabilities of each

component with respect to Dolby Digital, DTS and

MPEG audio formats.

Choices: Component 1, Component 2, ...

Initial setting: Component 1

Screen Sample

Notes:

– If [PCM] is selected for Digital Output in Setup –

Audio Menu, all signals are converted to PCM

format before being output.

– An “*” (asterisk) appears next to the name of the

component initially recognized by this unit. The

audio signal output format is determined by the

transfer capabilities of the component, and signals

are output to all connected components.

– The component name is displayed only when the

i.LINK receiver component connected to this unit

supports i.LINK (AUDIO). The component name is

not displayed for DVD players or DV camcorders.

– If the i.LINK component connected to this unit does

not contain any device name information, “****” is

displayed.

AutoPlay Select

You can use this setting to specify a receiver for

automatically switching the input to this player when

you start playback of a disc.

Choices: Off, Component 1, Component 2, ...

Initial setting: Off

Information about the operational status of this unit is

displayed in the front panel display as follows:

Note:

– The i.LINK indicator located on the front panel of

this unit lights only when i.LINK is selected for an AV

amplifier connected to this unit via an i.LINK

interface. Even if [Off] is selected for Audio Output

in the on-screen menu, the i.LINK indicator lights

whenever i.LINK is selected on the connected AV

amplifier.

* RX-Z9

Connection Status

Dolby D

➔

Dolby D

DTS ➔ DTS

MPEG ➔ PCM

i.LINK

Display Status

BUS FULL

Displayed when data transfer is not possible

because you are already using the allowable

maximum bandwidth of the i.LINK bus or

when 17 or more i.LINK components are

connected to this unit.

LINKING

Displayed when this unit is checking a new

i.LINK connection.

LOOP CHECK

Displayed when this unit and the i.LINK

component are connected in a loop (where

the output signal is returned to the original

component).

NO OUTPUT

Displayed when an i.LINK connection was

activated, but either the new connection is

not recognized by DTCP, or the amplifier

connected to this unit does not allow

transmission.

Operation

Notes:

– Unless otherwise stated, all operations described

herein are based on remote control usage.

– Some operations can be carried out using the On-

screen menu on the TV screen.

1 Press STANDBY/ON to turn on the unit.

2 Press OPEN/CLOSE on the front panel to open the

disc tray.

3 Place the disc in the tray, with the label facing up.

4 Press OPEN/CLOSE again to close the tray.

➜ READING appears in the Status window on TV and

on the player’s front panel display, and playback

starts.

➜ If you press PLAY when the tray is open, this unit

closes the tray and starts playback.

Note:

– If Disc Lock is set to [On] and the disc inserted is not

authorized, you must enter a four-digit code

(see “Access” on page 15).

• DVD-Video discs may contain one or more titles, and

each TITLE may contain one or more chapters.

• DVD-Audio discs may contain one or more groups, and

each group may contain one or more tracks.

Disc Structure

Playing a disc

1 Insert the disc and close the tray.

Playback starts automatically.

➜ The TV screen and the player’s front panel display

show the disc type, information and playing time.

2 When the Disc Menu appears on the TV screen, use the

knlh buttons or the numerical buttons on the

remote control to select an option and continue

playback.

If the titles are numbered, press the numerical buttons or

use the kn button to select the desired title in the menu

bar.

3 To stop playback, press the STOP button.

Smart Resume

This unit memorizes the last five discs and their next

starting points where they are stopped at the last time

operation.

Using this function, you can quickly return to the scene

you were watching last time.

To interrupt playback:

Press STOP to interrupt playback.

Resuming playback of the disc that has not

been

ejected from this unit

• Press PLAY.

➜ Playback resumes automatically from the point

where the playback was interrupted.

• Press STOP again, then press RETURN/RESUME on

the remote control.

➜ Playback resumes from the point where the playback

was interrupted.

• Press STOP again, then press PLAY.

➜ Playback starts from the beginning of the disc.

• Press PLAY when the resume icon is on screen.

➜ Playback resumes from the point where the playback

was interrupted.

Resuming playback of the disc that has been ejected

from this unit

• Re-load the disc.

➜ Playback starts from the beginning of the disc.

• Press PLAY when the resume icon is on screen, or press

RETURN/RESUME when the playback is not

performing.

➜ Playback resumes from the point where the playback

was interrupted.

Note:

– The Smart Resume function is also compatible with

VCDs and SVCDs.

Basic playback

DVD-Video and DVD-Audio

DVD-A

DVD-V

Title 1 Chapter 1

Chapter 2

Chapter 3

Title 2

Chapter 1

Chapter 2

Chapter 3

Group 1 Track 1

Track 2

Track 3

Group 2

Track 1

Track 2

Track 3

English

Operation

DVDs may contain menus to navigate the disc and

access special features such as audio language selection,

subtitle language selection, and other options.

1 Press MENU.

➜ If the disc includes a menu, it will appear on screen.

• To access to the disc menu, press TITLE/CHAP first,

then press MENU.

2 Press the appropriate numerical buttons or use the

knlh buttons to highlight your selection in the

DVD menu, then press the ENTER/OK button to

confirm.

3 To remove the menu, press MENU again.

Camera angle

Some discs contain scenes that were shot

simultaneously from various angles.

This unit allows you to select the desired camera angle.

• When this unit encounters a scene shot from multiple

angles, it will so indicate in the screen.

➜ The angle icon remains displayed until multiple

angles are no longer available.

• Press ANGLE repeatedly or use kn buttons to select

the desired angle.

➜ Playback shifts to the selected angle.

• You can also access the angle function in the On-screen

menu (Toolbar ➔ View ➔ Angle).

Changing the audio language and

format

1 Press AUDIO on the remote control to activate the audio

language selection menu.

2 Choose a language by pressing the AUDIO button

repeatedly or by pressing the kn buttons.

3 Press the ENTER/OK button to confirm.

Note:

– You can also select an audio language and an audio

format also in the On-screen menu (Toolbar ➔

Play option ➔ Audio).

Subtitle language

1 Press SUBTITLE on the remote control to activate the

subtitle language selection menu.

2 Choose a language by pressing the SUBTITLE button

repeatedly or by pressing the kn buttons.

3 Press the ENTER/OK button to confirm.

Note:

– You can also select a subtitle language in the On-

screen menu (Toolbar ➔ Play option ➔ Subtitle).

The DVD-Audio is developed for the sole purpose of

creating high quality pure sound with Linear PCM and

Packed PCM (Loss less coding) in up to six audio-

channels. The sampling frequency of 192 kHz/24 bits

are supported.

Moreover, many DVD-Audio discs offer slide show and

page turn capabilities.

Changing pages

Some DVD-Audio discs contain information pages that

can include photo galleries, artist biographies, lyrics,

etc.

Every time you press the PAGE button on the remote

control, the page is turned to the next.

Playing bonus groups

Some discs contain bonus groups that require a four-

digit password to gain access. In this case, consult the

disc jacket and other packaging for information.

1 While playback is stopped, press TITLE/CHAP button.

➜ The group and track list is displayed on the TV

screen.

2 Press the kn buttons to select a bonus group, then press

the h button.

3 Enter a four-digit password using the numeric buttons,

then press the ENTER/OK button.

➜ To exit from the password entry screen without

entering the password, press STOP.

4 Press the kn buttons to select a track, then press the

ENTER/OK button.

DVD Video Mode

Some DVD-Audio discs include DVD-Video contents

that can be played on conventional DVD-Video players.

In the On-screen menu (Toolbar ➔ Play option ➔

DVD Video Mode), select [On] to play the DVD-Video

content, or select [Off] for normal playback.

Notes:

– The DVD-AUDIO indicator lights up when a

DVD-Audio disc is playing.

– When you set DVD-Video mode [ON], the DVD-

AUDIO indicator turns off.

DVD features DVD-Audio features

When you play a down mix prohibited disc,

DOWN MIX indicator turns off. Multi-channel

tracks will play regardless of the Analog output

settings in the On-screen menu. The MIXED 2CH

jacks output the front L and R signals only.

Operation

The SA-CD standard is based on Direct Stream Digital

(DSD) technology. This new direct-stream digital

format comprises a 1-bit system that has a digital

sampling frequency that is 64 times higher than that of

conventional audio CD.

There are three types of SA-CD discs: single-layer,

dual-layer and hybrid discs. Each type may contain two

areas of recorded information: a High Quality Stereo

area and a High Quality Multi-channel area.

– A single layer disc can contain both information

areas.

– A dual layer disc can contain both information areas.

Double the information can be stored on the disc,

thanks to the second layer.

– A hybrid disc can contain both information areas, and

also a second, standard CD layer, making it playable

on standard CD players.

Recorded information may vary per area, as indicated in

the disc inlay. You can select areas before or during

playback while you are playing SA-CD via the remote

control or via the On-screen display on your TV.

• SA-CD contains only TRACKS.

• Select tracks using the playlist on the screen or by

pressing the numerical buttons.

• If SA-CD-text is available on the disc, it will be

displayed on the TV screen.

Playing a disc

1 Insert the disc and close the tray.

Playback starts automatically.

➜ The TV screen will display the current playing status

and current playing track list in the area.

2 Playback will stop at the end of the disc.

3 To stop playback, press STOP.

• [Analog output] setting in the On-screen menu (Setup ➔

Audio Menu ➔ Analog output) allows you to specify

which area of SA-CD to play automatically when you

insert the disc. When you select [Stereo], stereo area is

selected. When you select the other choices, multi-

channel area is selected.

• If you set the playback area that the disc does not

contain, this unit automatically play the available area

on the disc.

Sound mode – SA-CD playback

You can change the playback area of the SA-CD by

pressing the SOUND MODE button on the remote

control.

Press the SOUND MODE at any time to select the

multi-channel area or the stereo area in the HD layer.

Press the SOUND MODE button when the disc is

stopped to select the CD layer.

Select the area by pressing the SOUND MODE button

repeatedly.

• On hybrid discs (with SA-CD and CD layers), the player

will always start playing the SA-CD layer.

• The SA-CD indicator lights only when the SA-CD layer

is selected.

• You can program the playlist in the same area only.

SA-CD (Super Audio CD)

CD layer that plays on any

CD player

High Density layer containing:

- High Quality DSD Stereo

- High Quality DSD Multi-channel

SA-CD Disc Types

Single layer disc

Dual layer disc

Hybrid layer disc

HD layer HD layer

HD layer

CD layer

SA-CD

Multichannel area

(if available)

TRACK 1

TRACK 2

TRACK 3

Stereo area

(if available)

TRACK 1

TRACK 2

TRACK 3

CD layer

(in Hybrid

discs only)

TRACK 1

TRACK 2

TRACK 3

English

Operation

• Audio CDs contain only TRACKS.

• They can be played on this unit with the audio output

connected to a stereo system or to your TV.

• Select tracks using the track list on the TV screen or by

pressing the numerical buttons or kn buttons.

Disc structure

Playing a disc

1 Insert the disc and close the tray.

➜ Playback starts automatically.

➜ The TV screen will display the track list and current

playing status.

2 Playback will stop at the end of the disc.

3 To stop playback, press STOP.

Current VCD 2.0 and Super Video CD 1.0 standard

features include:

• Video CDs may contain one or more tracks, and tracks

may contain one or more indexes.

• You can display either tracks or indexes.

Disc structure

The following VCD and SVCD features and

formats are supported:

The following formats are not supported for

VCDs:

– HQ-VCD encoded at 2.4Mbps or 2.6Mbps

– XVCD (eXtended VCD) with higher resolution and

data rate

– DIVX format files

Playing a disc

1 Insert the disc and close the tray.

➜ Playback starts automatically.

➜ The current track number and its elapsed playing time

are displayed in the status window.

2 Playback will stop at the end of the disc.

3 To stop playback, press STOP.

Notes:

– The Disc Resume feature is also available for VCDs

and SVCDs (see the “Smart Resume” section on

page 20).

– When you play a Karaoke disc, you can change the

vocal by pressing AUDIO on the remote control.

Playback Control (PBC)

Playback Control is a feature on some Video CDs and

Super Video CDs that enables users to access selected

tracks directly from the disc menu.

1 Insert a Video CD or Super Video CD that features PBC,

then press PLAY.

2 Navigate the menu using the buttons indicated on the

TV screen until your chosen passage starts to play. If a

PBC menu displays a list of tracks, you can select a track

directly.

3 Enter your choice using the numerical buttons (0-9).

4 Press RETURN/RESUME or b to return to the

previous menu. Press a to proceed to the next menu.

5 You may also select [PBC OFF] in the On-screen menu.

➜ When [PBC OFF] is selected, PBC menus are

unavailable.

Audio CD

Video CD and

Super Video CD

TRACK 1

TRACK 2

TRACK 3

VCD

TRACK 1 INDEX 1

INDEX 2

INDEX 3

TRACK 2

INDEX 1

INDEX 2

INDEX 3

Features Video CDs 2.0 Super Video CDs 1.0

Video

bit rate

resolution NTSC

resolution PAL

MPEG-1

constant 1,150 Kbps

352x240, 29.97Hz

352x288, 25Hz

MPEG-2

variable up to 2.6 Mbps

480x480 interlaced,

29.97Hz

480x576 interlaced, 25Hz

Still picture (photo)

resolution NTSC

resolution PAL

MPEG-1

352x240, 704x480

352x288, 704x576

MPEG-2 (1 Frame)

480x480, 704x480

480x576, 704x576

Audio

sampling

bit rate

audio channels

surround sound

MPEG-1 layer II

44.1KHz

224Kbps

1 stereo / 2 mono

Stereo with Dolby Pro-

Logic

MPEG-1 layer II

44.1KHz

32-384Kbps

< 2 stereo / 4 mono

MPEG-1 (5+1) extension

Overlay graphics/text

sub-channels

coding

overlay video plane

<= 4

4 color CLUT (2bits/pixel)

Operation

You can play MP3 music that was recorded onto a CD-R

or CD-RW by a computer.

Disc structure (example)

• Since the MP3 format can store several albums onto a

disc, a folder is assigned to an “Album”, and a file is

assigned to a “Track”.

MP3 disc features

The MP3-CD format (ISO9660 format) support

the following:

• MP3 files must have the extension “.MP3” or

“.mp3”.

• Max. 30 characters

• Max. nested directory is 8 levels.

• Max. album number is 99.

• Max. track number is 999.

• Supported VBR bit-rate

• Supported sampling frequency of 16/22.05/24/32/

44.1/48 kHz

The following features are not supported for

MP3 discs:

• The discs that have any types of file other than MP3

and JPEG.

• The simultaneous playback of the MP3 and JPEG

files.

• Chinese filenames and text

• Non-finalized closed discs

• Discs recorded in UDF format

Additional note for MP3 disc playback:

– The disc read time may exceed 10 seconds due to the

large number of songs compiled onto one disc.

– Multi-session discs are supported.

– The digital output signals of MP3 files are copy-

protected.

Downloading MP3 files from the internet or copying

songs from your own legal discs is a delicate process.

Playing a disc

1 Insert the disc and close the tray.

➜ Playback starts and the playlist appears

automatically. If the disc includes both MP3 and

JPEG files, the selection menu appears on the screen

and asks you which file to play.

2 Playback will stop at the end of the disc.

3 To stop playback, press STOP.

Choosing an Album/Track to

playback

You can choose an Album/Track to playback from the

list displayed in the TV screen.

1 In the playlist, press kn to select the Album/Track to

playback.

2 Press lh to select the Album/Track in the next layer

to playback.

MP3 text

MP3-CD discs may contain text information called ID3

Tag (e.g., track name, album name, artist name, etc.)

that can appear on the TV screen during playback.

MP3

Track 2

Album 1.1

Album 1 (Folder)

MP3

Track 1 (File)

Album 2

Track 1

English

Operation

This player can playback JPEG format pictures on a

personally recorded CD-R/RW disc or commercial CD.

Disc structure

JPEG disc features

The JPEG format (ISO 9660 format) supports

the following:

• Max nested directories, 8 levels.

• Max numbers of rolls are 99.

• Max numbers of pictures are 999.

• The files with the extensions of “.JPEG”, “.jpeg”,

“.JPG”, or “.jpg”.

The following types of disc and conditions are

not supported:

• Discs with playback control functions

• The discs that have any types of file other than MP3

and JPEG

• The simultaneous playback of the JPEG and MP3

files

• Progressive JPEG formatted discs

• Non-finalized discs

• UDF formatted discs

Notes:

– The disc read time may exceed 10 seconds if the disc

has large amount of pictures. The read time may vary

depending on the file types and sizes.

– Multi-session discs are supported.

Playing a disc

1 Insert the disc and close the tray.

➜ Playback starts automatically.

➜ Thumbnails are displayed on screen.

A chosen thumbnail can be displayed on full screen.

Move the cursor with knlh to select the

thumbnail, and press ENTER/OK. Press MENU to

return to the thumbnail screen.

2 Press PLAY during a full screen mode.

➜ The slide show starts.

3 To stop playback, press STOP.

➜ The slide show stops.

• Press MENU to return to the thumbnail screen.

• When you press PAUSE, the slide show pauses. To

return to the normal slide show, press PLAY.

• Repeat and shuffle function are also available for JPEG

discs.

Slide show setting

You can set the duration of each image.

Picture Time

1 Press ON SCREEN.

➜ The On-screen menu appears.

2 Go to [Picture Time] (Toolbar ➔ Slide Show ➔

Picture time) by using knlh buttons, then press h.

3 Make a choice with kn.

Choices: Slow (about 8 sec), Medium (about 5 sec),

Fast (about 2 sec)

4 To return to the previous menu, press l.

• To exit from the On-screen menu, press ON SCREEN.

Rotating the image

You can rotate the JPEG image.

1 Press ON SCREEN.

➜ The On-screen menu appears on the screen.

2 Go to [Rotate] (Toolbar ➔ View ➔ Rotate) by using

knlh buttons, then press h.

3 Make a choice with lh.

Choices: –180, –90, 0, +90, +180

4 To return to the previous menu, press l.

• To exit from the On-screen menu, press ON SCREEN.

Note:

– This function is not available during slide show

playback.

JPEG

Roll 1 Image 1

Image 2

Image 3

Roll 2

Image 1

Image 2

Image 3

Picture Time

JPEG

image

Picture Time Picture Time

JPEG

image

JPEG

image

Operation

Moving to another segment

When a disc includes more than one segment, you can

quickly move to another segment by the following

operation.

Moving to the appointed segment directly:

1 Press TITLE/CHAP button on the remote control.

➜ The TITLE/CHAP menu appears on the screen.

2 Press kn or the numerical buttons to select a segment.

Press RETURN/RESUME button on the remote control

to erase the TITLE/CHAP menu from the screen.

Moving to the next/previous segment:

Press a or b briefly during playback to proceed

to the next segment or to return to the beginning of the

current segment.

Press b twice quickly to step back to the previous

segment.

Numeric button operation:

For the direct access to a segment, enter the segment

number using the numerical buttons (0-9) on the remote

control.

For example to select the segment number 12, press 1

first, then press 2.

Key control:

To search forward or reverse at various speeds, hold

down a or b for more than two seconds. The

choices are for audio discs, –8, –4, +4, +8; and for video

discs, –32, –4, +4, +32.

OSD control:

1 Select [Fast] in the On-screen menu (Toolbar ➔ Search

➔ Fast).

2 Press the lh button to select the desired speed.

3 Select [+1] to resume playback at normal speed.

Slow motion

OSD control:

1 Select [Slow] in the On-screen menu (Toolbar ➔ Search

➔ Slow), then press h.

➜ Playback pauses.

2 Press lh to select the desired speed: –1, –1/2, –1/4 or

–1/8 (reverse), or +1/8, +1/4, +1/2 or +1 (forward).

3 Select [+1] to resume playback at normal speed.

4 If you press the e button, the speed will be set to zero

(PAUSE).

5 To exit slow motion mode, press PLAY.

Notes:

– You can use this function for DVD-Audio while the

disc is playing its video content.

– Slow motion in reverse is not available for VCDs or

SVCDs.

Still picture and frame-by-frame

playback

Key control:

You can activate frame-by-frame playback by pressing

the PAUSE repeatedly.

OSD control:

1 Select [Frame by Frame] in the On-screen menu

(Toolbar ➔ Search ➔ Frame by Frame), then press h.

➜ Playback pauses.

2 Press the lh button to select the previous or next

picture frame.

3 To exit frame-by-frame playback, press PLAY.

Note:

– You can use this function for DVD-Audio while the

disc is playing its video content.

Time search

The Time Search function enables you to start playback

at a specific time on the disc.

1 Select [Time] in the On-screen menu (Toolbar ➔ Search

➔ Time).

➜ Playback pauses.

➜ The elapsed playing time is displayed in a time edit

window.

2 Enter hours, minutes and seconds from left to right in the

time edit window using the remote control numerical

buttons.

➜ Each time an item is entered, the next item is

highlighted.

3 Press the ENTER/OK button to confirm the selected

time.

➜ Playback starts from the selected time position on the

disc.

4 Press ON SCREEN to remove the menu bar.

General features

DVD-A DVD-V

VCD

SA-CD

CD MP3

DVD-A DVD-V

VCD

SA-CD

MP3

DVD-A DVD-V

VCD

DVD-A DVD-V

VCD

DVD-A DVD-V

VCD

SA-CD

English

Operation

Repeat

Press REPEAT button to repeat a certain segment of the

disc.

Each time you press REPEAT, the repeat mode changes

as follows:

This feature may not be available on some discs.

Repeat A-B

Repeat a sequence in a track.

Repeat a sequence in a title.

1 Press A-B at the desired starting point.

➜ REPEAT A- is displayed on the front panel display.

2 Press A-B again at the desired end point.

➜ REPEAT A-B appears briefly on the front panel

display, and the repeat sequence begins.

3 To exit the sequence, press A-B.

➜ REPEAT OFF is displayed on the front panel display.

Shuffle

This function shuffles the playing order of chapters or

tracks within a title/group/album (if the title/group/

album has more than one chapter or track). When

Shuffle Play within a title/group/album finishes, the unit

continues shuffle playback within the next title/group/

album.

1 Press SHUFFLE during playback.

➜ SHUFFLE appears on the screen for about two

seconds.

2 To return to normal playback, press SHUFFLE again.

This function shuffles the playing order of tracks on a

disc.

1 Press SHUFFLE during playback.

➜ SHUFFLE appears on the screen for about two

seconds.

2 To return to normal playback, press SHUFFLE again.

Note:

– For SA-CD this function works in the currently

selected area only.

Scan

Plays the first 10 seconds of each segment on the disc.

1 Press SCAN.

2 To continue playback at your chosen segment, press

SCAN again or press PLAY.

Note:

– You can also access this function by selecting

[Chapter Preview] in the On-screen menu.

Zoom

This function allows you to enlarge the video image and

pan through the enlarged image during playback or

pause.

1 Press ZOOM on the remote control, or select [Zoom] in

the On-screen menu (Toolbar ➔ View ➔ Zoom) and

press h to enter zoom mode.

➜ The cursor appears on screen.

2 Press the knlh buttons to move around the image

on screen.

3 Press the ENTER/OK button to enlarge the image. Each

time you press the ENTER/OK button, the zoom factor

changes from x1 to x2 to x4 to x8.

4 To exit from zoom mode, press ENTER/OK repeatedly

to select x1. Then, press the ZOOM button in order to

turn off the cursor from the screen.

Track

Group

Disc

Off

DVD-A DVD-V

VCD

SA-CD

MP3

Chapter

Title

Disc

Off

Track

Disc

Off

Track

Album

Disc

Off

Track

Area

Off

DVD-A

VCD

SA-CD

MP3

DVD-V

DVD-A DVD-V

MP3

VCD

SA-CD

DVD-A DVD-V

VCD

SA-CD

MP3

DVD-A DVD-V

VCD

Operation

FTS video/audio program

• The FTS (Favorite Track Selection) function enables

you to store your favorite tracks, etc.

• The FTS list can contain up to 20 items.

• The most recent program list is placed on the top of the

existing list.

1 Press ON SCREEN on the remote control.

➜ The On-screen menu appears.

2 Go to [Tracks] (Toolbar ➔ Program ➔ Tracks) by using

the knlh buttons, then press the h button.

3 Press the kn button to select the item to store in your

FTS list, then press the ENTER/OK.

➜ The selected item flashes momentarily when it is

stored in the FTS list.

4 Repeat the above procedure to set the FTS list.

5 Press the l button, then press ON SCREEN to exit

from the On-screen menu.

➜ This unit starts playing the FTS list automatically.

Notes:

– You can check your FTS list in the On-screen menu

(Toolbar ➔ Program ➔ Playlist). Press the kn

buttons to navigate the playlist menu.

– For SA-CD, you can program FTS list in the

currently selected area only.

– For DVD-Audio, the password must have been

entered in order to play bonus tracks.

Activating/deactivating the FTS

program

You need to select [On] in the [Program] menu to

activate the FTS function.

1 Press ON SCREEN on the remote control.

➜ The On-screen menu appears.

2 Go to [Program] (Toolbar ➔ Program ➔ Program) by

using the knlh buttons, then press the h button.

3 Press the kn to select [On] or [Off].

4 Press the l button, then press ON SCREEN to exit

from the On-screen menu.

Erasing a track/chapter/index from

the FTS list

You can erase the items that you programmed in the

FTS list.

1 Press ON SCREEN on the remote control

➜ The On-screen menu appears.

2 Go to [Playlist] (Toolbar ➔ Program ➔ Playlist) by

using the knlh buttons, then press the h button.

3 Press the kn button to select the item you want to erase,

then press ENTER/OK.

➜ The selected item disappears from the list.

4 Press the l button, then press ON SCREEN to exit

from the On-screen menu.

Erasing all tracks/chapters/indexes

from the FTS list

You can erase everything at once in the FTS list.

1 Press ON SCREEN on the remote control.

➜ The On-screen menu appears.

2 Go to [Clear all] (Toolbar ➔ Program ➔ Clear all) by

using the knlh buttons, then press the h button.

➜ “Cleared” appears momentarily, then all items in the

list are erased.

3 Press the l button, then press ON SCREEN to exit

from the On-screen menu.

Activating/deactivating Disc lock

Using this function you can prohibit the access of others

to certain discs.

1 Press ON SCREEN on the remote control.

The On-screen menu appears.

2 Go to [Enter PIN] (Setup ➔ Access ➔ Enter PIN) using

the knlh buttons, then press the h button.

3 Enter the four-digit PIN of your own choosing.

4 Move to [Disc lock] menu using the kn buttons.

5 Select [On] or [Off] using the kn buttons.

6 Press the l button, then press ON SCREEN to exit the

On-screen menu.

➜ If you select [On] in the [Disc lock] menu,

unauthorized discs will not be played unless the four-

digit PIN is entered.

Notes:

– Confirmation of the four-digit PIN is necessary

when:

• The PIN is entered for the very first time (see

above).

• The PIN is changed or cancelled (see “Changing

the four-digit PIN” on page 29).

– If you select [Off] in the [Disc lock] menu, the FTS

function will not be performed.

Authorizing discs

When [Disc lock] is [ON], you must authorize discs

before you can play them.

1 Insert the disc.

The Disc lock dialog will appear.

2 Enter your four digit PIN for [Play once] or

[Play always].

• If you enter the four-digit PIN for [Play Once], the disc

can be played one time only. You must re-enter the code

if disc is ejected or the power is turned off.

• If you enter the four-digit PIN for [Play always], the disc

can be played anytime, even when [Disc lock] is [ON].

DVD-A DVD-V

VCD

SA-CD

MP3

Disc lock

DVD-A DVD-V

VCD

English

Operation

Notes:

– The player memory can maintain 120 authorized

(Disc locked) disc titles. A disc title will be added to

the list if [Play always] is selected.

– Each time a Disc locked disc is played, it will be

added to the top of the list. When the list is full (120),

the last disc in the list will be replaced when a new

disc is added.

– Double-sided DVDs and multi-volume VCDs may

have a different ID for each side. In order to make

Disc Locks to such discs, each side must be

authorized.

Deauthorizing discs

If you authorize a disc for [Play always], the disc content

will always be available for playback — until you

deauthorize the disc. Follow the procedure below to

deauthorize a disc.

1 Insert the disc.

➜ Playback starts automatically.

2 Press STOP within about 10 seconds after appears in

the screen.

➜ will appear on the screen, indicating that the disc

is now locked.

DVD movies may contain scenes that are unsuitable for

children. Therefore, discs may contain Parental Control

information that may apply to the entire disc or to

certain scenes. These scenes are rated from 1 through 8.

Alternative, more suitable scenes may be available on

the disc. Ratings are country-specific. The Parental

Control feature enables you to prevent discs from being

played by your children or, in some cases, to substitute

alternative scenes.

Activating/deactivating Parental

Control

1 When the disc playback is stopped, press ON SCREEN

on the remote control.

➜ The On-screen menu appears.

2 Go to [Enter PIN] (Setup ➔ Access ➔ Enter PIN) by

using the knlh buttons, then press the h button.

3 Enter your four-digit PIN.

4 Press the kn button to select [Parental level], then press

the h button.

5 Press the lh button to select a rating from 1 through

8 for the disc.

Rating 0:

Parental Control is not active. The disc plays in full.

Ratings 1 to 8:

If you set a rating for the player, all scenes with the same

rating or lower will be played. Higher rated scenes will

not be played unless an alternative that has the same

rating or lower is available on the disc. If no suitable

alternative is available, playback will stop and the four-

digit code will be required to proceed.

6 Press the ENTER/OK button, then press the ON

SCREEN button to exit the On-screen menu.

Country

You can apply a rating system associated with a specific

country to the Parental Level control.

1 When the disc playback is stopped, press ON SCREEN

on the remote control.

➜ The On-screen menu appears.

2 Go to [Enter PIN] (Setup ➔ Access ➔ Enter PIN) by

using the knlh buttons, then press the h button.

3 Enter your four-digit PIN.

4 Press the kn button to select [Country], then press the

h button.

5 Select a country using the kn button.

6 Press the ENTER/OK button to confirm your selection

and exit.

1 When the disc playback is stopped, press ON SCREEN

on the remote control.

➜ The On-screen menu appears.

2 Go to [Enter PIN] (Setup ➔ Access ➔ Enter PIN) by

using the knlh buttons, then press the h button.

3 Enter the current four-digit PIN.

4 Press the k button to highlight [Change PIN], then press

the h button.

5 Enter the current four-digit PIN again, then enter a new

four-digit PIN.

6 Enter the new PIN again.

7 Press the ON SCREEN button to exit the menu.

➜ The new four-digit code is in effect.

If you forget your four-digit code

1 Press OPEN/CLOSE to remove the disc, then press

OPEN/CLOSE again to close the tray.

2 Press ON SCREEN on the remote control.

➜ The On-screen menu appears.

3 Go to [Enter PIN] (Setup ➔ Access ➔ Enter PIN) by

using the knlh buttons, then press the h button.

4 Press the s button for four times.

➜ “Enter New PIN” appears on screen.

5 Enter your new four-digit PIN.

Note:

– The factory default PIN is 0000.

Parental Control

DVD-A DVD-V

Changing the four-digit PIN

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the

warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system in for repair.

If the problem is not listed above, or if the instructions fail to help, turn off the power to the unit,

disconnect the power cable, and contact the nearest authorized YAMAHA dealer or service center.

Problem Solution

No power

– Check to ensure that the AC power cord is properly connected.

No picture

– Check to ensure that the TV is switched on.

– Check the video connection.

Distorted picture

– Occasionally, a small amount of image distortion may be visible. This is

not a malfunction.

Completely distorted picture or black

and white picture when playing a DVD/

Super Audio CD or Video CD

– Make sure the NTSC/PAL setting on the DVD player matches the video

signal of your television. (See “TV System (NTSC/PAL conversion)” on

page 15.)

No sound or distorted sound

– Adjust the volume.

– Check that the speakers are connected correctly.

No audio at digital output

– Check the digital connections.

– Check the settings menu to ensure that the digital output is set to [All] or

[PCM only].

– Check to ensure that the audio format of the selected audio language

matches your receiver capabilities.

Disc does not play.

– Check that the disc label is facing up.

– Determine if the disc is defective by trying another disc.

Picture freezes momentarily during

playback.

– Check the disc for fingerprints or scratches.

– Clean with a soft cloth, wiping from center to outside edge.

Fails to return to start-up screen when

disc is removed

– Reset the unit by switching the player off, then on again.

No response to remote control

– Aim the remote control directly at the sensor on the front of the player.

– Reduce the distance to the player.

– Replace the batteries in the remote control.

– Re-insert the batteries with their polarities (+/– signs) as indicated.

Buttons do not work or player stops

responding.

– To completely reset the player, unplug the AC cord from the AC outlet for

5-10 seconds.

No response to some operating

commands during playback

– Certain operations may not be permitted by the disc. Refer to the

instructions for the disc.

Cannot read CDs/DVDs

– Use a cleaning CD/DVD to clean the lens before sending this unit in for

repair.

The picture is not displayed in a proper

position on the screen

– Change the parameter of the Video Shift menu in the On-screen menu

(Preferences ➔ Picture ➔ Video shift). See page 12, 13.

Connect record MP3

– SCMS copy protected discs cannot be recorded digitally. Try recording by

analog jacks.

English

Specifications

PLAYBACK SYSTEM

DVD-Audio

DVD-Video

Super Audio-CD, Stereo/Multi-channel and Hybrid disc

DVD+R, DVD+RW

DVD-R, DVD-RW (Video Format)

Video CD (VCD)

Super Video CD (SVCD)

CD-Audio (CD-DA)

CD-R/CD-RW (CD-DA, VCD, SVCD)

MP3, JPEG

TV STANDARD (PAL/50 Hz) (NTSC/60 Hz)

Number of lines 625 525

Playback Multistandard (PAL/NTSC)

VIDEO PERFORMANCE

YUV output Y: 1Vpp into 75 ohm

Pb/Cb Pr/Cr: 0.7Vpp into 75 ohm

S-Video output Y: 1Vpp into 75 ohm

C: 0.3Vpp into 75 ohm (PAL)

C: 0.286Vpp into 75 ohm (NTSC)

Video output 1 Vpp into 75 ohm

AUDIO FORMAT

DSD Multi-channel and Stereo

Dolby Digital/DTS/MPEG Compressed Digital

PCM/Packed PCM fs 48, 96, 192, and 44.1, 88.2,

176.4kHz

16, 20, 24bits

MP3 (ISO9660) 32, 44.1, 48, and 16, 22.05, 24kHz

Full decoding of Dolby Digital, DTS and MPEG multi-channel

sound/analogue stereo sound

Dolby Surround compatible downmix from Dolby Digital multi-

channel sound

3D Sound for virtual 5.1 channel sound on two speakers

Dolby Pro Logic II 5.1 ch decoding from the stereo source

SA-CD AUDIO PERFORMANCE

D/A Converter DSD

SA-CD fs 2.8224 MHz

Max. output voltage (0 dB) 2 V rms

Signal-Noise Ratio 115 dB

Dynamic Range 107 dB

Total Harmonic Distortion (1 kHz) 0.0017 %

AUDIO PERFORMANCE (Without upsampling)

DA Converter 24 bits

DVD fs 96 kHz 2 Hz - 44 kHz

CD/Video CD fs 44.1 kHz 2 Hz - 20 kHz

Signal-Noise Ratio 115 dB

Dynamic Range 103 dB

(DVD 48 kHz 24 bit)

Total Harmonic Distortion (1 kHz) 0.0017 %

(DVD 48 kHz 24 bit)

CONNECTIONS

SCART Euroconnector x1 (Europe model

only)

Y Pb/Cb Pr/Cr Cinch 3x (green, blue, red)

S-Video Output Mini DIN, 4 pins

Video Output Cinch (yellow) x1

Audio Mixed 2 ch Output Cinch (white/red)

Digital Output 1 coaxial, 1 optical

6 channel analogue output

Audio Main L/R Cinch (white/red)

Audio Surround L/R Cinch (white/red)

Audio Centre Cinch (blue)

Audio Subwoofer Cinch (black)

HDMI TYPE A x1

IEEE1394 4 pins x2

CABINET

Dimensions (w x h x d) 435 x 100 x 314 mm

Weight Approx. 5.6 kg

POWER SUPPLY

Power inlet

U.S.A and Canada models AC120V, 60 Hz

Australia model AC240V, 50 Hz

U.K. and Europe models AC230V, 50 Hz

General model AC110-240V, 50/60 Hz

Power usage Approx. 33 W

Power usage standby < 1 W

Specifications subject to change without notice.

Printed in China 3139 246 13392

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Yamaha DVD-S2500 El manual del propietario

Marca: Yamaha

Modelo: DVD-S2500

Categoría: Reproductores de DVD

Tipo: El manual del propietario

Descargar PDF

informe

En otros idiomas

français: Yamaha DVD-S2500 Le manuel du propriétaire
italiano: Yamaha DVD-S2500 Manuale del proprietario
English: Yamaha DVD-S2500 Owner's manual
Deutsch: Yamaha DVD-S2500 Bedienungsanleitung
русский: Yamaha DVD-S2500 Инструкция по применению
Nederlands: Yamaha DVD-S2500 de handleiding
português: Yamaha DVD-S2500 Manual do proprietário
dansk: Yamaha DVD-S2500 Brugervejledning
polski: Yamaha DVD-S2500 Instrukcja obsługi
čeština: Yamaha DVD-S2500 Návod k obsluze
svenska: Yamaha DVD-S2500 Bruksanvisning
Türkçe: Yamaha DVD-S2500 El kitabı
română: Yamaha DVD-S2500 Manualul proprietarului

Yamaha DVD-S2500 El manual del propietario

Yamaha DVD-S2500 El manual del propietario

En otros idiomas

Documentos relacionados

Otros documentos