
SPECIFICATIONS
General Specifications
General Specifications General Specifications
General Specifications
Display: 3-3/4 dgt LCD, 3200 counts
Polarity Indication: Automatic, positive
implied, negative indicated
Zero Adjustment: Automatic
Overrange Indication: ..OL-
Low Battery Indication:
+ -
Change battery immediately,
Display Update Rate: 2/sec, nom,
Operating Temp.: 0 to 50°C, 0 to 70%
Relative Humidity
Storage Temp: -20°C to 60°C, 0 to 80%
RH, battery removed
Environment: Indoor use, Altitude up to
2000 m.
Power: Standard 9-volt battery, NEDA
1604, JIS 006P, IEC 6F22
Auto Power-Off: Meter turns off after 10
minutes of inactivity.
Battery Life (typical): 300 hrs alkaline,
200 hrs zinc-carbon.
Dimensions: 6.1x2.8x1.3 inches, (15.5 x
7.2 x 3.2 cm)
Weight (including battery): 6.5 ounces
(170 grams)
Accessories: Test leads, spare fuse, bat-
tery, and Operators Manual
Safety
SafetySafety
Safety: Meets EN61010-1 Cat III - 600V;
; Pollution degree 2; Class II.;
EMC
EMCEMC
EMC: Meets EN50081-1, EN50082-1
This product complies with
requirements of the following
European Community
Directives: 89/336/EEC (Electromagnetic
Compatibility) and 73/23/EEC (Low Voltage)
as amended by 93/68/EEC (CE Marking),
However. electrical noise or intense
electromagnetic fields in the vicinity of the
equipment may disturb the measurement
circuit. Measuring instruments will also
respond to unwanted signals that may be
present within the measurement circuit. Users
should exercise care and take appro-
priate precautions to avoid misleading results
when making measurements in the presence
of electronic interference
Electrical Specifications
Electrical Specifications Electrical Specifications
Electrical Specifications
Accuracy at 23
°
C
±
5
°
C. < 75% RH
DC Volts
DC Volts DC Volts
DC Volts
Ranges: 320mV, 3.2, 32, 320, 600V
Accuracy, all Rgs:
±
(0.5% rdg + 1dgt)
Resolution, 320mV Range: 100
µ
V
Input Impedance, 320mV rg.
> 1000M
Ω
: 3.2V rg: 11 M
Ω
;
32V-600V rgs: 10M
Ω
OL Protection, all ranges: 600V RMS /
600VDC
AC Volts 50
AC Volts 50AC Volts 50
AC Volts 50-
--
-500Hz
500Hz500Hz
500Hz (
3.2V rg: 50-300Hz).
Accuracies apply to sine wave inputs only
Ranges: 3.2, 32, 320, 600V
Accuracy, all rgs.
±
(2.0% rdg + 4 dgt)
Input Impedance: 3.2V rg: 11M
Ω
;
32V - 600V rgs: 10M
Ω
OL Protection, all Ranges. 600VDC or AC
RMS
DC Current
DC Current DC Current
DC Current
Ranges: 320. 3200
µ
A. 32, 320mA, 10A
Accuracy, all rgs:
±
(2.5% rdg + 4 dgt)
Resolution, 320
µ
A range: 100nA
OL Protection: fast blow ceramic fuses.
min interrupt rating 1500A -320 mA
- 21 -