Panasonic TV DVD Combo TC 22LR30 Manual de usuario

Marca: Panasonic

Modelo: TV DVD Combo TC 22LR30

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Este manual también es adecuado para

TC 22LR30

Getting Started TV Operation Disc / Card Operation

LCD TV / DVD-Recorder Combination

Operating Instructions

Model No. TC-22LR30

MULTI FORMAT PLAYBACK

* Ability to play back may depend on

recording conditions.

As an ENERGY STAR

Partner, Matsushita Electric Corporation of

America has determined that this product or product model meets the

ENERGY STAR

guidelines for energy efficiency.

Please read these instructions carefully before attempting to connect, operate, or

adjust this product. Please save this manual.

Spanish Quick Use Guide is included.

(Guía para rápida consulta en español está incluida.)

LSQT0853 A

Information

• Initial Setup and Connection Procedures are on page 21.

Before Using

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

On your purchase of one of the most sophisticated and reliable

products on the market today. Used properly, it will bring you and

your family years of enjoyment. Please fill in the information below.

The serial number is on the tag located on the back of your unit.

Please check and identify the supplied accessories.

Use numbers indicated in parentheses when asking for

replacement parts.

Date of Purchase __________________________________

Dealer Purchased From _____________________________

Dealer Address ___________________________________

Dealer Phone No. __________________________________

Model No. _______________________________________

Serial No. ________________________________________

1 Remote Control (EUR7624060)

2 Batteries “AA”

Congratulations

Accessories

Installation

To order accessories, call toll free 1-800-332-5368.

Receiver Location

Locate for comfortable viewing. Avoid placing where sunlight or

other bright light (including reflections) will fall on the screen. Use

of some types of fluorescent lighting can reduce Remote Control

transmitter range.

Adequate ventilation is essential to prevent internal component

failure. Keep away from areas of excessive heat or moisture.

Optional External Equipment

The Video / Audio connection between components can be made

with shielded video and audio cables. For best performance,

antenna cables should utilize 75 Ω coaxial shielded wire. Cables

are available from your dealer or electronic supply store. Before you

purchase any cables, be sure you know what type of output and

input connectors your various components require. Also determine

the length of cable you’ll need.

For optimum quality picture

When the LCD is exposed to light from outdoors or lighting fixtures,

high-contrast pictures may not be displayed clearly. Turn off

florescent lamps near the LCD and place in a location not exposed

to outdoor light.

Adjust viewing position

The LCD screen can be tilted up to 10° rearward.

The red, blue, and green dots on the screen are a characteristic of

the LCD panel and not a malfunction.

• Please note that extremely high precision technology is employed to

produce the LCD Monitor screen resulting in a 99.99 % pixel effective rate.

This leaves only 0.01 % pixels inactive or always lit.

About LCD Panel

1 F-Type Antenna

Connector (for 4C-2V)

(K1RKZBA00001)

Getting Started

Table of Contents

Getting

Started

Operation

Disc / Card

Operation

Information

Before Using ........................................................................................................ 2

Important Safety Instructions ............................................................................. 4

Information ........................................................................................................... 8

Location of Controls ......................................................................................... 12

Connections ....................................................................................................... 15

Initial Setup –Ready to Play– ........................................................................... 21

Tuning TV ........................................................................................................... 22

TV Operation ...................................................................................................... 25

TV Settings ......................................................................................................... 28

Before Using the Disc or Card ......................................................................... 34

DVD/SD Functions Windows and Status Messages ...................................... 35

Function List ...................................................................................................... 36

Recording ........................................................................................................... 38

Timer Recording ................................................................................................ 40

Various Recording............................................................................................. 42

Playing Discs ..................................................................................................... 44

Various Playback ............................................................................................... 45

Using On-screen Menus ................................................................................... 49

Editing the Recorded Programs (Using the Direct Navigator) ...................... 51

Editing and Playing Still Pictures (Using the Direct Navigator) .................... 54

Using Play List ................................................................................................... 57

Disc Setting / Card Setting ............................................................................... 60

Entering Text ...................................................................................................... 63

Transferring (Dubbing) Still Pictures ............................................................... 64

Changing the Unit’s Settings ........................................................................... 67

Glossary ............................................................................................................. 70

Helpful Hints ...................................................................................................... 71

Specifications .................................................................................................... 77

Limited Warranty ............................................................................................... 78

Customer Services Directory ........................................................................... 79

Guía rápida de uso en español ........................................................................ 80

Index ................................................................................................................... 90

TV Operation Disc / Card Operation Information

Important Safety Instructions

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 Important Safety Instructions for this unit

1) Read these instructions.

All the safety and operating instructions should be read before

the appliance is operated.

2) Keep these instructions.

The safety and operating instructions should be retained for

future reference.

3) Heed all warnings.

All warnings on the appliance and in the operating instructions

should be adhered to.

4) Follow all instructions.

All operating and use instructions should be followed.

5) Do not use this apparatus near water.

For example, near a bathtub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool, and

the like.

6) Clean only with dry cloth.

Do not use liquid cleaners or aerosol cleaners. Use a dry cloth

for cleaning.

7) Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

Slots and Openings in the cabinet are provided for ventilation

and to ensure reliable operation of the product and to protect

it from overheating. The openings should never be blocked

by placing the product on a bed, sofa, rug, or other similar

surface.

8) Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

This product should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is provided or

the manufacturer’s instructions have been adhered to.

9) Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider

than the other. A grounding type plug has two blades and

a third grounding prong. The wide blade or the third prong

are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the

obsolete outlet.

10) Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11) Only use attachments / accessories specified by the

manufacturer.

The exclamation point within a

triangle is intended to tell the

user that important operating and

servicing instructions are in the

papers with the appliance.

The lightning flash with arrow

head within a triangle is

intended to tell the user that

parts inside the product are a

risk of electric shock to persons.

 Note to CATV System Installer:

This reminder is provided to direct the CATV system installer’s attention to Article 820–40 of the NEC that provides guidelines for proper

grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the

point of cable entry as practical.

12) Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use

caution when moving the cart / apparatus

combination to avoid injury from tip-over.

Quick stops, excessive force, and uneven

surfaces may cause the appliance and cart

combination to overturn.

13) Unplug this apparatus during lightning storms or when unused

for long periods of time.

This will prevent damage to the product due to lightning and

power-line surges.

14) Refer all servicing to qualified service personnel. Servicing

is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the AC

cord power plug is securely connected.

16) If an outside antenna is connected to the television equipment,

be sure the antenna system is grounded so as to provide some

protection against voltage surges and built up static charges.

In the U.S. Selection 810-21 of the National Electrical Code

provides information with respect to proper grounding of the

mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

GROUND

CLAMP

ELECTRIC

SERVICE

EQUIPMENT

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC

- NATIONAL ELECTRICAL CODE

Getting Started

 Important Information Regarding Use of Video Games, Captions or Other Fixed Image Displays.

The extended use of fixed image program material can cause a permanent “shadow image” on the LCD panel. This background image

is viewable on normal programs in the form of a stationary fixed image. This type of irreversible LCD panel deterioration can be limited

by observing the following steps:

A. Reduce the brightness / contrast setting to a minimum viewing level.

B. Do not display the fixed image for extended periods of time.

C. Turn the power off when not in actual use.

 This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury.

Disposal of these materials may be regulated in your community due to environmental considerations.

For disposal or recycling information please contact your local authorities, or the Electronics Industries

Alliance: www.eiae.org.

NOTE:

• This equipment is designed to operate in the U.S.A. and other countries where the broadcasting system and AC house current is exactly the same as in

the U.S.A..

• The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is not covered by Warranty. This

product is not designed to display fixed image patterns for extended periods of time.

17) An outside antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits,

or where it can fall into such power lines or circuits. When

installing an outside antenna system extreme care should be

taken to keep from touching such power lines or circuits as

contact with them might be fatal.

18) Unplug this unit from the wall outlet, and refer servicing to

qualified service personnel under the following conditions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the

operating instructions. Adjust only those controls that

are covered by the operating instructions as improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the unit to normal operation.

e. If the unit has been dropped or the cabinet has been

damaged.

f. When the unit exhibits a distinct change in performance

- this indicates a need for service.

19) When replacement parts are required, be sure the service

technician uses replacement parts specified by the

manufacturer that have the same characteristics as the original

part. Unauthorized substitutions may result in fire, electric

shock, or other hazards.

20) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR

MOISTURE.

DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES,

CUPS, COSMETICS, ETC.) ABOVE THE SET. (INCLUDING

ON SHELVES ABOVE, ETC.)

21) CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE

THIS PLUG WITH A RECEPTACLE OR OTHER OUTLET

UNLESS THE BLADES CAN BE FULLY INSERTED TO

PREVENT BLADE EXPOSURE.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

AS WITH ANY SMALL OBJECT, SD CARS CAN BE SWALLOWED BY YOUNG CHILDREN. DO NOT ALLOW

CHILDREN TO HANDLE THE SD CARD.

WARNING

CAUTION:

UNIT IS A CLASS I LASER PRODUCT.

HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF

DIRECTED. BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.

WHEN THIS UNIT IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC

TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT ATTEMPT TO REPAIR THE UNIT YOURSELF. REFER SERVICING TO QUALIFIED

PERSONNEL.

(Inside of product)

CAUTION:

LASER RADIATION WHEN OPEN. DO NOT STARE INTO

BEAM.

Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098, 4,907,093, and 6,516,132 licensed for limited viewing uses only.

This product incorporates copyright protection technology that is protected by U.S. Patents and other intellectual property rights. Use of

this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only

unless otherwise authorized by Macrovision. Reverse engineering or dis as sem bly is prohibited.

ATTENTION:

RAYONNEMENT LASER EN CAS D’OUVERTURE.

NE PAS REGARDER DANS LE FAISCEAU.

Getting Started

Dear Panasonic Customer

Welcome to the Panasonic family of customers.

We hope that you will have many years of enjoyment from your new LCD TV/DVD-Recorder.

To obtain maximum benefit from your set, please read these instructions before making any adjustments, and retain them for

future reference.

Retain your purchase receipt, and record the model number and serial number of your set in the space provided on the rear

cover of these instructions.

For assistance, please call : 1-800-211-PANA (7262)

or send e-mail to : [email protected]

or visit us at www.panasonic.com/contactinfo

For assistance, please call : 787-750-4300

or visit us at www.panasonic.com/contactinfo

Federal Communication Commission Information

(U.S.A.)

(Puerto Rico)

This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause or receive interference, which can be determined by turning equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

Reorient or relocate the TV antenna.

Increase the separation between TV and other equipment.

Connect TV into separate outlet from other equipment.

Consult the dealer or an experienced radio / TV technician for help.

FCC Caution: Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications not expressly approved by Matsushita

Electric Corporation of America could result in harmful interference and would void the user’s authority to operate this equipment.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC.

SD Logo is a trademark.

Portions of this product are protected under copyright low and are provided under license by ARIS/

SOLANA/4C.

Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the

double-D symbol are trademarks of Dolby Laboratories.

VCR Plus+ and PlusCode are registered trademarks of Gemstar Development

Corporation. The VCR Plus+ system is manufactured under license from

Gemstar Development Corporation.

Pats. 5,307,173; 5,335,079; 4,908,713; 4,751,578; and 4,706,121

“DTS” and “DTS2.0 + Digital Out” are trademarks of Digital Theater Systems, Inc.

MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and

Thomson multimedia.

Information

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

• Insert so the poles (+ and - ) match those in the Remote Control.

• Do not use rechargeable type batteries.

Do not:

• Mix old and new batteries.

• Use different types at the same time.

• Heat or expose to flame.

• Take apart or short circuit.

• Attempt to recharge alkaline or manganese batteries.

• Use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can

damage items the fluid contacts and may cause a fire.

Remove if the Remote Control is not going to be used for a long

period of time. Store in a cool, dark place.

* A process that allows play on compatible equipment.

Loading the Batteries

Play-only discs



Discs that cannot be played

• 2.6 and 5.2 GB DVD-RAM, 12 cm (5˝)

• 3.95 and 4.7 GB DVD-R for Authoring

• Unfinalized DVD-R recorded on other equipment (refer to “Finalize” on

page 70)

• PAL discs (you can still play the audio on DVD-Audio)

• DVD-Video with a region number other than “1” or “ALL”

DVD-ROM, DVD-RW, +R, +RW, CD-ROM, CDV, CD-G, Photo CD, CVD,

SVCD, SACD, MV-Disc, PD , Divx Video Disc, etc.

 DVD-Video

You can play discs with these symbols.

 CD-R and CD-RW discs

This unit can play finalized* CD-R/CD-RW (audio recording disc)

recorded in CD-DA (digital audio), Video CD or MP3 format. Some

CD-R or CD-RW may not be played due to the condition of the

recording.

Unit auto adjusts clock for DST (Daylight Saving Time.)

DST (Daylight Saving Time)

• If your area does not observe Daylight Saving Time, select DST : OFF

(refer to “Manual Clock Setting” on page 23).

• Keep these time changes in mind when pro gram ming the unit for timer

recording.

■ Spring (First Sunday in April)

DST: ON ➞ Sets clock ahead one hour.

■ Autumn (Last Sunday in October)

DST: ON ➞ Turns clock back one hour.

• The producer of the material can control how DVD-Video and Video CDs

are played. This means that you may not be able to control play of a disc

with some operations described in these operating instructions. Read the

disc’s instructions carefully.

• This unit can play CD-R/CD-RW (audio recording disc) recorded with

CD-DA (digital audio), video CD (video CD format 2.0 or above) or MP3.

Finalize* the disc after recording.

* A process that allows play on compatible equipment.

• This unit cannot record onto CD-R or CD-RW.

Disc type Disc Logo Instructions

Indication in

these operating

instructions

DVD-Audio

High fidelity music discs

• Played on this unit in

2 channels.

DVD-A

DVD-Video

High quality movie and

music discs

DVD-V

Video-CD

Music and video

recorded (including

CD-R/RW)

VCD

Audio-CD

Music and audio

recorded (including

CD-R/RW)

CD-R and CD-RW with

music recorded in MP3

(p. 47)

(CD-DA)

MP3

(MP3)

Dolby Digital:

This unit can play Dolby Digital in stereo (2 channels).

Connect an amplifier with a built-in Dolby Digital

decoder to enjoy surround sound.

DTS Digital Surround:

Connect this unit to equipment that has a DTS decoder

to enjoy DVDs with this mark.

1 Open the cover.

3 Close the cover.

• Slide in direction of “ ” mark until cover

snaps shut.

2 Insert batteries as marked.

Information (Unit) Information (Disc)

Getting Started

Discs you can use for recording and play



DVD-R discs

One time recording discs (recordable until the disc is full)

• You can record up to 8 hours [in EP (8 H) mode].

• By finalizing the disc, you can play it in a DVD player as DVD-Video

(Play only) (pp. 62, 70).

• You cannot record digital broadcasts that allow “One time only recording”.

• This unit is compatible with 1×-4× recording speed discs.

Disc type Disc Logo

Indication in these operating

instructions

DVD-R

DVD-RAM

RAM

 DVD-RAM discs

Re-writable discs

• You can record up to 16 hours [in EP (8 H) mode on double-sided disc.

You cannot record or play continuously on two sides]. (Refer to “Recording

modes and approximate recording times” on page 39.)

• You can perform chasing playback (p. 42).

• Scratch and dust resistant cartridge discs and large capacity double sided

discs (9.4 GB) are commercially available.

• You can record digital broadcasts that allow “One time only recording”

when using CPRM (Content Protection for Recordable Media) compatible

discs (p. 70).

Capacity

• 12 cm (5″) 9.4 GB (double-sided) and 4.7 GB (single-sided)

• 8 cm (3″) 2.8 GB (double-sided)

Notes:

• We recommend using Panasonic discs. DVD-R from other manufacturers

may not be recorded or played due to the condition of the recording.

• This unit cannot record to discs containing both PAL and NTSC signals.

Play of discs recorded with both PAL and NTSC on another unit is not

guaranteed.

• Some parts of the disc, for example where one program ends and another

begins, may not play smoothly.

Protection (Cartridge discs)

With the write-protect tab in the protect position, you cannot

record to, edit, or erase from the disc.

Play automatically starts when inserted in the

unit.

Capacity

• 12 cm (5″) 4.7 GB, 8 cm (3″) 1.4 GB for General Ver. 2.0

• 4.7 GB, 12 cm (5″) for General Ver. 2.0 / 4× - SPEED

DVD-R Revision 1.0

4#%4/20

Discs or Card you can use

* Possible operations (○: enable, × : unable)

Type

Possible operations*

DVD-RAM

RAM

○○○○○

DVD-R

Before

Finalizing

DVD-R

○○○** ××

After

Finalizing

DVD-V

× ○ ×××

DVD-Audio

DVD-A

× ○ ××○

DVD-Video

DVD-V

× ○ ××○

Audio-CD

CD-DA

Format

× ○ ×××

MP3

Format

MP3

× ○ ×××

Video-CD

VCD

× ○ ××○

Card

× ○○*** ××

Recording

Playback

Title erase/Entering text

Creating play lists

Selecting audio

** The remaining capacity of the disc will not be increased even if erased.

*** Only titles in folders can be input.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Disc Handling

The following chart indicates the differences. Select based upon

what you require.

DVD-RAM DVD-R

Re-writable YES NO

Edit YES YES

Play on other players YES

YES

Recording both Main and SAP of

MTS broadcast

YES

Recording broadcasts that allow

one copy

YES

Recording 16:9 aspect picture YES YES

You can erase, enter name and change thumbnail. Available space does

not increase after erasing.

Only on DVD-RAM compatible players.

After finalizing the disc (pp. 62, 70).

Only one is recorded (“Select MTS” on page 69).

CPRM (p. 70) compatible discs only.

The picture is recorded in 4:3 aspect.

Which should I use, DVD-RAM or DVD-R?

• The region number of this player is “1”.

• The player will play DVD-Video marked with labels bearing “1” or “ALL”.







For U.S.A. and Canada

Example:



!,,











This unit is designed and manufactured to respond to the Region

Management Information that is recorded on a DVD disc. If the

Region number described on the DVD disc does not correspond to

the Region number of this unit, this unit cannot play this disc.

Region Management Information

Disc Composition Examples

Disc Type Disc Composition

DVD-

RAM

Title

(Program)

Title 1

(Program 1)

Title 2

(Program 2)

Title 3

(Program 3)

Title 4

(Program 4)

Title 5

(Program 5)

Play List Chapter 1

(Scene 1)

Chapter 2

(Scene 2)

Chapter 3

(Scene 3)

Chapter 4

(Scene 4)

Chapter 5

(Scene 5)

DVD-R

Before

Finalizing

DVD-R

Title

(Program)

Title 1

(Program 1)

Title 2

(Program 2)

Title 3

(Program 3)

Title 4

(Program 4)

Title 5

(Program 5)

After

Finalizing

DVD-V

Title Title 1 Title 2

Chapter Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2

DVD-

Audio

DVD-A

Group Group 1 Group 2

Track Track 1 Track 2 Track 3 Track 1 Track 2

DVD-

Video

DVD-V

Title Title 1 Title 2

Chapter Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2

Audio-

CD-DA

Format

Track Track 1 Track 2 Track 3 Track 4 Track 5

MP3

Format

MP3

Group Group 1 Group 2

Track 1 2 3 1 2 3

Total

Track

123456

Video-

VCD

Track Track 1 Track 2 Track 3 Track 4 Track 5

 Handling precautions

• Do not attach labels or stickers to discs. (This may cause disc

warping and un-balanced rotation, rendering it unusable.)

• Do not write on the label side with a ball-point pen or other

writing instrument.

• Do not use record cleaning sprays, benzine, thinner, static

electricity prevention liquids or any other solvent.

• Do not use scratch-proof protectors or covers.

• Do not use the following discs:

- Disc with exposed adhesive from removed stickers or labels

(rented discs, etc.).

- Discs that are badly warped or cracked.

- Irregularly shaped discs, such as heart shapes.

 How to hold a disc

Do not touch the recorded surface.

 If there is dirt or condensation on the disc

RAM

DVD-R

• Clean with an optional DVD-RAM/PD Disc cleaner

(LF-K200DCA1, where available).

• Do not use cleaners for CDs or cloths.

DVD-A

DVD-V

VCD

Wipe with a damp cloth and then wipe dry.

• Do not place in the following areas:

- In direct sunlight.

- In very dusty or humid areas.

- Near a heater.

Note:

• You can create chapters for your recorded title/

program. And, you can arrange created chapters

into a desired scene list (Play List).

Getting Started

• Use a genuine SD Memory Card or MultiMediaCard.

(We recommended using a Panasonic SD card.)

• You cannot use SD cards that exceed 2 GB.

• Compatible with: FAT 12 or FAT 16

• Use this unit to format a memory card when using for the first time (p. 61).

Note that the memory card may no longer be usable on other equipment

once formatted on this unit.

• This unit operates in accordance with the DPOF (Digital Print Order

Format) (p. 56). (Card only)

• Only use the memory cards recommended above.

 SD Memory Card Write Protection

You can protect valuable images, etc. from

accidental erasure.

Move switch to LOCK : erase/edit not possible.

Move switch back : erase/edit possible.

Cards capable of displaying and saving

Card type Card Logo

Indication in these

operating instructions

SD Memory Card

MultiMediaCard

Still Pictures

• The unit can play DCF* compliant JPEG and TIFF files taken on a digital

camera.

* Design rule for Camera File system: unified standard established by Japan

Electronics and Information Technology Industries Association (JEITA).

• Picture definition:

Compatible in the range 34 × 34 – 6 144 × 4 096 (sub sampling is 4:2:2 or

4:2:0)

• This unit can handle a maximum of 300 folders (including header

folders) and 3 000 files. Files and folders with numbers which exceed the

maximum cannot be displayed, copied or erased.

• Audio, video and still pictures (MOTION JPEG etc.) that are not compliant

with the DCF standard and still pictures other than JPEG and TIFF cannot

be displayed.

• Still pictures created or edited on a computer may not be playable.

• TIFF is compatible with uncompressed RGB chunky formats. Other types

of TIFF files cannot be played.

• When playing TIFF files, it may take time for them to be displayed.

• When there are a lot of folders and files, it may take a long time to display,

copy or erase.

• Folder titles that were input on equipment other than this unit may not be

displayed properly.

 Still picture folder structure

The following can be displayed on this unit.

* Folders can be created on other equipment. However, these folders

cannot be selected as a transferring (dubbing) destination.

• The folder cannot be displayed if the numbers are all “0” (e.g., DCIM000

etc).

• If a folder name or filename has been input using other equipment, the

name may not be displayed properly or you may not be able to play or edit

the data.

 Card Handling

Do not touch terminal side of card.

Notes:

• JPEG and TIFF files on a CD-R/CD-RW cannot be played back.

• JPEG and TIFF files on a DVD-RAM can played back.

 Naming folders and files

• MP3 files must have the extension

“.MP3” or “.mp3”.

• At the time of recording, give folder

and file names a 3-digit numeric

prefix in the order you want them to

play (this may not work at times).

• English alphabets and Arabic

numerals are displayed correctly.

Other characters may not be

displayed correctly.

Information (MP3)

 Tips for making MP3 discs

• Discs must conform to ISO9660 level 1 or 2 (except for extended formats).

• Compatible compression rate:

between 32 kbps and 320 kbps

• Compatible sampling rate:

16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz and 48 kHz

• Maximum number of tracks and groups recognizable: 999 tracks and

99 groups

• This unit is compatible with multi-session.

• This unit is not compatible with ID3 tags or packet writing.

• Depending on the recording, some items may not be playable.

• Reading or play of the disc may take time if there are a lot of still pictures

or sessions.

• The display order may differ from how the order is displayed on a

computer.

002 group

001

001track.mp3

002track.mp3

003track.mp3

003 group

001track.mp3

002track.mp3

003track.mp3

001track.mp3

002track.mp3

003track.mp3

004track.mp3

Root

Order of play

(folder=group)

(file=track)

Note:

• MP3 recordings on a DVD-RAM or DVD-R cannot be played back.

Information (Card)

Location of Controls

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Remote Control Buttons

No. Part Name Description Page

INPUT Changes input mode. 25

POWER Turns power on and off. 21

OPEN/CLOSE Opens/closes disc tray. 34

NUMBER keys Directly inputs numerical data. 25

R-TUNE

Displays the last channel you were

watching.

CANCEL

ADD/DLT

Cancels input data.

Adds/deletes channels in unit

memory.

SKIP Ι◄◄ /►►Ι

Skips to previous/next chapter or

track.

STOP

Stops playback, cancels resume,

and stops recording.

38, 44

PAUSE Pauses playback/recording. 38, 44

DIRECT

NAVIGATOR

Displays Direct Navigator

when playing a DVD-RAM and

non-finalized DVD-R. Displays Disc

Menu when playing a DVD Video

and finalized DVD-R.

45, 51, 54

No. Part Name Description Page

▲▼◄►

Use to move cursor for item

selection in menu and operation

screens.

During a paused picture, ◄ΙΙ / ΙΙ►

operates Frame Advance.

SUB MENU

Displays sub menu while using

Direct Navigator or Play list for

editing.

51, 56, 58

DVD SETUP Use to perform initial DVD setup. 67

PROG/CHECK

Use when programming a timer

recording and when displaying timer

recording information.

VCR Plus+

Makes setting timer recordings

quick and easy.

40, 41

ERASE Erases recording content. 47

AUDIO Switches the Audio mode. 27, 48

PICTURE MODE

Changes picture adjust mode.

(STANDARD, CINEMA, VIVID)

ASPECT Changes display aspect ratio. 26

CHAPTER Records the playback position. 48

DRIVE SELECT-

DVD

Selects DVD drive. 34

DRIVE SELECT-

Selects SD (card) drive. 34

MUTE Places unit in Mute mode. 26

SLEEP Sets the sleep timer. 25

CH ▲▼ Changes channels. 25, 38

VOL +/- Adjusts volume. 25

SLOW/SEARCH

◄◄ /►►

Searches for previous/next scene.

Pressing during pause mode starts

slow motion playback. Pressing

◄◄ or ►► to change slow motion

direction.

45, 46

PLAY/×1.3

Begins playback. Holding down for

1 second switches to fast playback.

MENU Displays TV menu. 22

ENTER Uses when finalizing menu entries. 22

RETURN

Uses when returning to the normal

screen from a menu.

Uses when returning to the previous

screen during setup.

TIME SLIP

Skips over a specified time on the

disc.

42, 46

CM SKIP

During playback, skips ahead

1 minute.

REC Begins recording. 38

REC MODE Sets to DVD Record mode. 38

F REC Sets Flexible Recording. 39

AUDIO MODE

Changes audio adjust mode.

(AUTO, STANDARD, DYNAMIC)

DISPLAY Displays operation status. 27, 35, 54

PLAY SETUP

Changes the initial playback settings

during play.

Getting Started

Unit Buttons

 Front View

No. Part Name Description Page

Remote Sensor

Receives infrared signal from

Remote Control.

–

POWER Indicator

Lights when power is on.

Standby: Red

On: Green

–

Built-in Speaker Equipped with a front speaker. –

Disc Tray Place compatible discs here. 34

SD Card Slot Place compatible cards here. 34

DVD Indicator Lights when in DVD mode. 34

SD Indicator Lights when in SD mode. 34

SD Indicator

On: When a card is set in this unit.

Flashes: When a card is being

read or written.

Timer Recording

display

On: When timer recording is on

standby.

Flashes: When the unit couldn’t go

to timer recording standby.

40, 41

Disc Type* Displays Disc media being used. –

TIME SLIP

Indicator

Lights when simultaneously

playing and recording a DVD.

Recording mode

Recording Mode Displays Disc of

recording.

(When FR is selected all lights go

out.)

No. Part Name Description Page

Channel

Displays channel.

Displays title number during

playback.

Main display

section

Recording and play counter, and

other miscellaneous messages.

38, 44

Disc operation

status

Displays condition of playback/

recording.

38, 44

POWER Turn the unit on or off. 21

INPUT Changes Input position. 25

VOLUME +/- Adjusts volume. 25

CHANNEL ▲▼ Changes channels. 25, 38

OPEN/CLOSE Opens/closes disc tray. 34

DRIVE SELECT

DVD/SD

Select the drive. 34

PLAY/×1.3

Begins playback. Holding down

for 1 second switches to fast

playback.

REC Begins recording. 38

SKIP Ι◄◄ /►►Ι

Skips to previous/next chapter or

track.

STOP

Stops playback, cancels resume,

and stops recording.

38, 44

 Top View

* D. MIX (Multi-channel DVD-Audio only)

On: Down-mixed audio is played. (p. 70)

Off: The disc prevents down-mixing so only the two front channel can be played.

20 21

16 17 18 19

6 7 8 9 10 11

14 15

1312

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 Rear View

 Left Side View

VIDEO S VIDEO

COMPONENT VIDEO INPUT

AUDIO

OUT

VIDEO

AUDIO

DIGITAL AUDIO OUT

PCM/BITSTREAM

OPTICAL

No. Part Name Description Page

Component signal

Input connector

Input the Component signal (Y,

PB, PR) from other equipment.

Video Input 1, 2

connector

Connect from other equipment. 16

Audio Out

connector

Outputs audio signal. (Analog) 19

Optical digital

Audio Out

connector

Outputs audio signal. (Digital) 18

VHF/UHF Antenna

Input terminal

Input terminal for an antenna or

cable box signal.

No. Part Name Description Page

HDMI Input

terminal

Connect the HDMI cable.

(For analog, also connect the

audio cables.)

AC Power Plug

When plugged into an AC outlet,

this unit consumes 0.8 W of

electric power in OFF condition.

–

Phones Jack (M3) Connect a Headphones. 20

6).







56 7

Getting Started

Connections

Notes on connections

• Turn off the power supply for all components before making any connections.

• If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to

fashion a cable to suit the component concerned.

• Read the instruction manual for each system component carefully before connecting it.

Connect the cable from Antenna to the VHF/UHF terminal on the

unit.

Cable Connection

Overtightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only.

Connecting the RF in Terminal

Note to CABLE system installer:

This re mind er is pro vid ed to call the CABLE (Cable TV) System

Installer’s at ten tion to Article 820-40 of the NEC that pro vides

guide lines for proper grounding and, in par tic u lar, specifies that

the cable ground shall be con nect ed to the ground ing system of

the build ing, as close to the point of cable entry as practical.

Cable Box

In from CABLE

VHF

Antenna

UHF

Antenna

CAUTION

Mixer

Antenna Connection

Connect the cable supplied by your local cable company to VHF/

UHF terminal on the unit.

Note:

• When the RF coaxial cable is connected to the projection display VHF/

UHF terminal via a cable box or VCR, set the TV channel to CH3 or CH4.

This does not apply when signal is input from VIDEO INPUT.

Use this configuration when connecting the LCD TV Antenna and

Cable TV system using VCR.

Connect the cable from the Output

terminal on the back of the Cable

Box or antenna/cable system to the

Antenna input terminal on the back

of the VCR.

VCR

Incoming Cable from

Antenna or Cable TV System

↑ TO VCR

In from cable

TERMINAL ON THE

BACK OF THE CABLE

BOX

CABLE BOX

↑ TO VCR

Connecting the Antenna / Cable to the RF IN

Terminal (VCR)



Cable / Antenna Connection

Incoming 75Ω Cable from

Home Antenna / Cable

Company

F-Type Antenna

Connector

Antenna

Terminal on the

Back of the TV

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

VIDEO S VIDEO

AUDIO

VIDEO S VIDEO

AUDIO

Notes:

• When connecting video cables, priority is given to the S-Video cable when both the S-VIDEO input terminal and the VIDEO input terminal are connected.

• Please make inquiries to video game manufacturers concerning component cables to connect with video game console.

• Select the desired VIDEO input position by pressing the INPUT button. (p. 25)

Connecting the “1, 2” AV Input Terminals

 Connects VCRs and other peripheral equipment

VIDEO

AUDIO

S-VIDEO

VHS VCR

S-VHS VCR

AUDIO

* Similar connections are available at the INPUT 1, 2 input terminals.

COMPONENT VIDEO INPUT

AUDIO

VIDEO

Notes:

• Select the desired COMPONENT VIDEO INPUT position by pressing the

INPUT button. (p. 25)

• Component video signals that can be input are 480i, 480p, 720p, and

1 080i.

• You cannot record the programs using this connection.

Because each Y, PB, and PR signal is input independently, the Component signal allows for more accurate color reproduction.

The Component signal output terminal indication will differ according to the output device (Y, P

B, PR).

Please read the operating instructions included with the output device.

DVD Player

COMPONENT VIDEO

AUDIO

Mode type

Signal data

Information

display

No. of dots

(H × V)

Horizontal

frequency

(kHz)

Vertical

frequency

(Hz)

DTV Format

Signals

480i 664 × 485 15.73 29.97 480 i

480p 720 × 483 31.47 59.94 480 p

*720p 1 280 × 720 45.00 60.00 720 p

1 080i 1 920 × 1 080 33.75 30.00 1 080 i

 Component Signals (Y, PB, PR) that can be Input

• Input signals, other than those listed with a * mark, will give you a

beautiful, stable picture.

Connecting the COMPONENT VIDEO Input Terminals

Getting Started

6)





Ferrite core (small size)

(not supplied)

HDMI Connection

HDMI

(High Definition Multimedia Interface) is the first all digital consumer electronics A/V interface that supports uncompressed standard.

The HDMI terminal supports both video and audio information.

You can connect an EIA / CEA-861 / 861B

compliant consumer electronic device, such as a Set Top Box or DVD player with HDMI or DVI

output terminal to the HDMI

input terminal.

Input a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to this HDMI terminal, so you can display high-

definition pictures on this TV in the digital form.

Attach just beside the

connector.

Audio cable

(not supplied)

HDMI cable

(not supplied)

The connector on the unit is HDMI Type A

connector.

AUDIO IN

The connector on the unit is HDMI Type A

connector.

Follow the diagram below to connect the unit to a set top box or a

DVD player.

Set Top Box

 When audio signal input is digital

 When audio signal input is analog

Notes:

• If the external device has DVI output only, use a DVI to HDMI adapter

cable

to connect to the HDMI terminal.

• Connect the audio cables to the AUDIO IN terminals for HDMI.

• Select the audio setting in HDMI IN. (p. 32)

• You cannot record the programs using this connection.

 Compatible VIDEO Signal

This input terminal is not intended for use with computers.

 Compatible sampling frequency of AUDIO signal

(L.PCM) : 48 kHz / 44.1 kHz / 32 kHz

Notes:

• This HDMI connector is Type A.

• If you connect an equipment without a digital output terminal, connect to

the COMPONENT VIDEO, S-VIDEO or VIDEO input terminal on the TV so

you can enjoy an analog signal.

No. of dots (H × V) Vertical scanning frequency (Hz)

1080i 1 920 × 1 080i 59.94 / 60

720p 1 280 × 720p 59.94 / 60

480p

720 × 480p

640 × 480p

59.94 / 60

480i 720 (1 440) × 480i 59.94 / 60

HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

EIA / CEA-861 / 861B profiles compliance covers profiles for

transmission of uncompressed digital video including high

bandwidth digital content protection.

HDMI-DVI conversion cable (TY-SCHO3DH): available on

Panasonic website (www.panasonic.com). Consult your

consumer electronics dealer for availability details.

Connection diagram

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an amplifier and

speakers. There are two types of connection, digital and analog.

Connect an AV amplifier with Dolby Digital or

DTS decoders

 Digital connection

Connecting the Audio Output Terminal

Please see amplifier

manual for speaker

requirements.

Speakers (example)

Amplifier with built in Dolby Digital

or DTS decoders.

Firmly connect the cable to

the connector.

OPTICAL

Connect a Digital amplifier

Enjoy “Dolby Digital” or “DTS” surround sound.

Smart one-line connection is possible.

Note:

• It is outputted in DVD playback only.

Getting Started

Connect an analog amplifier to enjoy high-quality stereo sound.

 Analog connection

IMPORTANT NOTE:

Caution for optical digital audio output connector:

• Be sure to refer to pages 67~69 regarding output settings of Dolby Digital,

dts, and PCM.

• CDs can be played as usual.

• Audio from the Digital Audio Out terminal is only output during playback.

• When connecting an amplifier which contains the Dolby Digital or dts

decoder, be sure to select “Bitstream”. When connecting an amplifier

which does not contain the Dolby Digital or dts decoder, be sure to select

“PCM”. (pp. 67~69) Otherwise, attempting to play a DVD may cause such

a high level of noise that it may harm your hearing and damage your

speakers.

Notes:

• Some dts decoders which do not support DVD-dts Interface may not work

properly with the unit.

• Avoid bending/ twisting the optical digital cable when connecting.

Manufactured under license from Digital Theater Systems, Inc.

US Pat. No’s. 5,451,942, 5,956,674, 5,974,380, 5,978,762,

6,487,535 and other U.S. and world-wide patents issued and

pending. “DTS” and “DTS 2.0 + Digital Out” are trademarks

For your reference:

• Dolby Digital is a digital sound compression technique developed by

the Dolby Laboratories Licensing Corporation. Supporting 5.1-channel

surround sound, as well as stereo (2-channel) sound, this technique

enables a large quantity of sound data to be efficiently recorded on a disc.

• LPCM is a signal recording format used in CDs. While CDs are recorded in

44.1 kHz/16 bit, DVDs are recorded in 48 kHz/16 bit up to 96 kHz/24 bit.

• If you have a Dolby Pro Logic Surround decoder, you will obtain the

full benefit of Pro Logic from the same DVD movies that provide full

5.1 channel Dolby Digital soundtracks, as well as from titles with the Dolby

Surround mark. For information on Panasonic or Technics Dolby Pro Logic

Surround Sound Decoders please contact your local dealer.

AUDIO

OUT

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

M3 plug

Connecting the Headphones / Earphones Jack

Left side of the TV

(Not supplied)

TV Operation

 Top view

Initial Setup (Ready to Play)

After plugging the unit into your household AC outlet and pressing

POWER to turn the unit on for the first time, the unit assists you

to set the on-screen language, and automatically tunes in all the

channels it can receive and sets the clock.

The unit automatically determines the type of transmission

(airwaves or cable) and puts them into channels as follows.

Preparation

• Turn on the television and select the appropriate video input to suit the

connections to this unit.

• Confirm that the antenna is connected correctly.

1 Press POWER.

• For remote POWER button

to function, unit POWER

must be ON.

2 Press ▲▼ to select

the language and

press ENTER.

• The unit then proceeds with Auto Clock Setting. The time is

displayed when finished.

• If “No Channels found...” is displayed, press ENTER again.

• DST, Daylight Saving Time, shows the summertime setting.

• TIME ZONE shows the time difference from Greenwich meantime

(GMT).

EST (Eastern Standard Time) = GMT –5

CST (Central Standard Time) = GMT –6

MST (Mountain Standard Time) = GMT –7

PST (Pacific Standard Time) = GMT –8

AST (Alaska Standard Time) = GMT –9

HST (Hawaii Standard Time) = GMT –10

For other areas: xx hr

5 Press ENTER.

 If the clock is an hour slower or faster than the

actual time

Select “–1” or “+1” in “Time Zone Adjust” in the SETUP menu.

(p. 23)

 If the unit couldn’t set the clock automatically

Set the time manually. (Refer to “Manual Clock Setting” on page

23.)

 To start Auto Channel Setting again (after

relocation, for example)

Reset the unit. (Refer to “Reset all unit Memory Functions” on

page 24.)

Antenna system and VCR Plus+ guide channel settings all

revert to the default values.

Band Channel

TV Mode

(Airwaves)

VHF 2-13

UHF 14-69

CATV Mode

(Cable)

VHF 2-13

CATV LOW BAND 95-99

CATV MID/SUPER BAND 14-36

CATV HYPER BAND 37-65

ULTRA BAND

66-94

100-125

SPECIAL CATV CHANNEL 1

English

Espa

ñol

Fran

çais

Select Language

Seleccione la Lengua

élection de Langue

Press ENTER

Pulse ENTER

Appuyer sur ENTER

4 Press ENTER to start

Auto Channel Setting.

AUTO CH SETTING

In “AUTO CH SETTING”

CHANNEL 35

STOP

Auto Clock Setting

4/4/2004 12:15 AM

DST---------------ON

TIME ZONE----EST

Auto Clock Setting is complete.

POWER

CH ▲▼

ENTER

▲▼

POWER

Initial Setup –Ready to Play–

3 Press ENTER.

Auto Channel Setting

Please press the ENTER key.

Connect antenna cable and if you use a

cable box tune it to your local PBS CH

then...

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 Top view

Automatic Channel Setting

1 Press MENU.

2 Press ◄► to select “SET UP.”

3 Press ▲▼ to select “PROGRAM CH” and press

ENTER.

ADJ. SET UP FUNC.

LANGUAGE

PROGRAM CH

CLOCK

LOCK

CLOSED CAPTION

INPUT LABEL

OTHER ADJUST

PAGE

RETURN

SELECT

4 Press ▲▼ to select “Antenna System” and press

ENTER.

 To exit the screen

Press RETURN.

Adding and deleting channels

Add or delete channels if necessary channels are not set or

unnecessary channels are set.

5 Press ▲▼ to select “TV” or “CATV” and press

ENTER.

PROGRAM

CHANNEL

Antenna System CATV

Auto Channel Setting

VCR Plus+ CH Setting

PROGRAM

CHANNEL

Antenna System

CATV

6 Press ▲▼ to select “Auto Channel Setting” and

press ENTER.

PROGRAM

CHANNEL

Antenna System CATV

Auto Channel Setting

VCR Plus+ CH Setting

7 Press ENTER.

• Auto Channel Setting starts. This takes a few minutes.

• Channels will automatically advance until all channels have been

scanned. Channel numbers with video signal received will be stored

in the Channel Memory.

8 Press ENTER.

1 Press NUMBER keys to select a channel.

e.g., 5: [0] → [5]

15: [1] → [5]

115: [1] → [1] → [5]

• You also use CH ▲▼ when you are going to delete a channel.

2 Press ADD/DLT.

NUMBER keys

ADD/DLT

▲▼◄►

RETURN

ENTER

Notes:

• After Auto Channel Setting finishes, the lowest channel number added will

be displayed.

• When there are no receivable channels, channel 69 (for TV) or channel

125 (for cable TV) is displayed.

CH ▲▼

Tuning TV

VOL-

CHANNEL 12 ADDED

CHANNEL 12 DELETED

TV Operation

Clock Settings

1 Press MENU.

2 Press ◄► to select “SET UP.”

3 Press ▲▼ to select “CLOCK” and press ENTER.

ADJ. SET UP FUNC.

LANGUAGE

PROGRAM CH

CLOCK

LOCK

CLOSED CAPTION

INPUT LABEL

OTHER ADJUST

PAGE

RETURN

SELECT

4 Press ▲▼ to select “Auto Clock Setting” and press

ENTER.

• DST, Daylight Saving Time, shows the summertime setting.

• TIME ZONE shows the time difference from Greenwich meantime

(GMT).

EST (Eastern Standard Time) = GMT –5

CST (Central Standard Time) = GMT –6

MST (Mountain Standard Time) = GMT –7

PST (Pacific Standard Time) = GMT –8

AST (Alaska Standard Time) = GMT –9

HST (Hawaii Standard Time) = GMT –10

For other areas: xx hr

6 Press ENTER.

 To cancel partway

Press RETURN.

Adjust the time zone (-1 or +1) if it was not set correctly with auto

clock setting.

4 Press ▲▼ to select “Time Zone Adjust” and press

ENTER.

4 Press ▲▼ to select “Manual Clock Setting” and

press ENTER.

5 Press ◄► to select the item you want to change

and press ▲▼ to change the setting.

• DST (Daylight Saving Time): ON or OFF

If you select “ON”, the clock is advanced one hour starting at 2 a.m.

on the first Sunday in April and ending at 2 a.m. on the last Sunday

in October.

• Time Zone (see above)

 To return to the previous screen

Press RETURN.

Auto Clock Setting

Time Zone Adjust

Manual Clock Setting

5 Press ▲▼ to select “-1” or “+1” and press ENTER.

CLOCK

Auto Clock Setting

Manual Clock Setting

Time Zone Adjust

5 Press ENTER.

• Auto Setting starts. This can take some time, up to a few hours in

some cases. The following screen appears when setting is complete.

Auto Clock Setting

4/4/2004 12:15 AM

DST---------------ON

TIME ZONE----EST

Auto Clock Setting is complete.

CLOCK

Auto Clock Setting

Manual Clock Setting

Time Zone Adjust

CLOCK

-1

CLOCK

Auto Clock Setting

Manual Clock Setting

Time Zone Adjust

6 Press ENTER.

• The clock starts.

Manual Clock Setting

CLOCK

1 // THU

MONTH DAY YEAR HOUR MINUTE

:PM12 001 2004

DST TIME ZONE

OFF EST

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Reset all unit Memory Func tions

Returns to factory setting. Use if relocating unit, or if Initial Setup

needs to be redone.

• Make sure a disc is not inserted in unit.

1 Turn the unit Power on.

2 Press MENU.

3 Press ◄► to select “SET UP.”

4 Press ▲▼ to select “LOCK” and press ENTER.

5 Hold down both MUTE on the Remote Control and

VOL- on the unit.

• The power will shut off.

6 Perform “Initial Setup” on page 21.

 To exit the screen

Press RETURN.

VCR Plus+ guide channel Settings

Set these guide channels so you can use the VCR Plus+

programming number for timer recording. Before starting the

settings, prepare a chart showing the channels, station names, and

guide channels.

Station name

Guide

channel

Channel

number

Channel setting

CBS 04 04 Unnecessary

HBO 33 15

Enter channel 15 next to

Guide Channel 33.

Nickelodeon 38 20

Enter channel 20 next to

Guide Channel 38.

e.g.,

Look up the guide channels for the

stations in magazines.

Write down all the stations you can

receive.

Note:

• If you have connected a cable TV box or satellite receiver, the VCR Plus+

system does not work so you do not have to set the guide channels.

1 Press MENU.

2 Press ◄► to select “SET UP.”

3 Press ▲▼ to select “PROGRAM CH” and press

ENTER.

ADJ. SET UP FUNC.

LANGUAGE

PROGRAM CH

CLOCK

LOCK

CLOSED CAPTION

INPUT LABEL

OTHER ADJUST

PAGE

RETURN

SELECT

4 Press ▲▼ to select “VCR PLUS+ CH Setting” and

press ENTER.

5 Press ▲▼ to select the guide channel you want to

set and press ►.

• When selecting the guide channel, press and hold ▲▼ to scroll the

screen up and down.

PROGRAM

CHANNEL

Antenna System CATV

Auto Channel Setting

VCR Plus+ CH Setting

PROGRAM

CHANNEL

VCR Plus+ CH Setting

Guide Channel CATV Channel

125

- - -

6 Press ▲▼ to select the channel corresponding to

the guide channel and press ◄.

• To delete a number, press CANCEL.

• Repeat steps 5 and 6 to enter other channels.

7 Press ENTER.

PROGRAM

CHANNEL

VCR Plus+ CH Setting

Guide Channel CATV Channel

- - -

Change Language Setting

1 Press MENU.

2 Press ◄► to select “SET UP.”

3 Press ▲▼ to select “LANGUAGE” and press

ENTER.

ADJ. SET UP FUNC.

LANGUAGE

PROGRAM CH

CLOCK

LOCK

CLOSED CAPTION

INPUT LABEL

OTHER ADJUST

PAGE

RETURN

SELECT

LANGUAGE

LANGUAGE ENGLISH

CHANGE

RETURN

4 Press ◄► to select Language.

5 Press RETURN twice to exit.

Preparation

• Complete Auto Channel Setting. (pp. 21, 22)

TV Operation

 Top view

 Select desired channel:

Press CH ▲▼ or NUMBER keys.

 Adjust desired volume level:

Press VOL + or VOL –.

Selecting Input Mode

Using the CH/VOL Button

 TUNER:

Signal of source connected to VHF/UHF terminal is displayed.

 VIDEO 1:

Signal of source connected to AV Input terminal 1 is displayed.

 VIDEO 2:

Signal of source connected to AV Input terminal 2 is displayed.

 COMPONENT:

Signal of source connected to COMPONENT Input terminal is

displayed.

 HDMI:

Signal of source connected to HDMI Input terminal is displayed.

When selecting CABLE channels 100 to 125 with the NUMBER

keys.

1 Press R-TUNE to display the last channel you were

watching.

 Example 1:

To select channel 125, first press the 1 key, then 2, then 5.

 Example 2:

To select channel 12, first press the 1 key, then 2.

 Example 3:

To select channel 2, first press the 0 key, then 2.

Rapid Tune

VIDEO1*

COMPONENT*

VIDEO2*

HDMI*

TUNER*

Using the NUMBER keys

This unit can be set for auto power off.

1 Press SLEEP repeatedly to select the desired time.

• To cancel, press SLEEP repeatedly until “0” appears.

2 The indication goes off a few seconds after the

adjustment is finished.

• Pressing DISPLAY with sleep timer set displays remaining time.

• From 3 minutes prior to power off, 3, then 2, then 1 flashes

on-screen.

Sleep Timer

30 60

0 90

INPUT

NUMBER keys

▲▼◄►

AUDIO

ASPECT

DISPLAY

ENTER

R-TUNE

VOL +/-

CH ▲▼

MUTE

SLEEP

* If SKIP is set as the INPUT LABEL setting, the mode will not be changed.

(p. 28)

1 Press INPUT.

• The display will change as follows.

TV Operation

INPUT

VOL +/-

Method 1

1 Press CH ▲▼.

• The display will change as follows.

Notes:

• The diagram at right is an example.

• TV CH 2 and CABLE CH 1 represent the

lowest channels in memory, while TV CH

69 and CABLE CH 125 represent the

highest channels in memory.

(TV)

CH69

(CABLE)

CH125

(TV)

CH2

(CABLE)

CH1

VIDEO1*

COMPONENT*

VIDEO2*

HDMI*

* If SKIP is set as the INPUT LABEL setting,

the mode will not be changed. (p. 28)

Method 2

CHANNEL ▲▼

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

ASPECT Controls

NORMALFULLZOOMJUST

This feature allows you to enjoy viewing the picture at its maximum

size, including wide screen cinema format picture.

1 Press ASPECT to select the screen mode.

Notes:

• However, if the mode selected does not match the aspect ratio of the input

signal, the original picture quality may be affected.

• If a normal (4:3) picture is projected in wide screen, distortion may occur

around the edges so that part of the picture may no longer be visible. We

recommend viewing in 4:3 mode so you can enjoy the picture as it was

intended to be seen.

• When a 1080i or 720p signal is being received, the mode is set to FULL,

and aspect is not possible.

• This feature does not work during SD mode.

• The aspect setting is stored separately for TV, VIDEO1, VIDEO2,

COMPONENT, HDMI and DVD/SD.

Mode Picture Explanation

JUST

JUST mode will display a 4:3

picture at its maximum size

but with aspect correction

applied to the sides of the

screen so that elongation is

only apparent at the left and

right edges of the screen. The

size of the picture will depend

on the original signal.

ZOOM

ZOOM mode magnifies the

central section of the picture.

FULL

FULL will display the picture

at its maximum size but with

slight elongation.

NORMAL

NORMAL mode will display a

4:3 picture at its standard 4:3

size without any stretching.

1 Press MUTE to instantly mute the sound. Press

again to restore the previous sound level.

Audio Mute

Position/Size

1 Press MENU.

2 Press ◄► to select “ADJ.”.

ADJ. SET UP FUNC.

PICTURE

PICTURE ADJUST

POSITION/SIZE

AUDIO

AUDIO ADJUST

PAGE

RETURN

SELECT

3 Press ▲▼ to select “POSITION/SIZE” and press

ENTER.

RETURN

POSITION/SIZE

NORMAL

NORMALIZE

SIZE

ZOOM

 SIZE:

Press ◄► to shrink the picture vertically [by 15 steps: 15

(original setting) down to 1].

• Press ENTER to return to the original setting.

ZOOM

 SIZE:

Press ◄► to select the size.

Size 1: reduces black bar.

Size 2: widens black bar.

• Press ENTER to return to the original position.

 POSITION:

Press ▲▼ to move the picture up or down.

• Press ENTER to return to the original position.

Size1

Size2

For “ZOOM” mode (See left)

For “NORMAL” and “JUST" mode (See left)

TV Operation

STEREO



SAP MONO

1 Press DISPLAY to display or remove the overlay.

TV Status & Clock Display

JUST 12:34PM CH 12

STEREO

SAP

MONO

Picture (Aspect) Mode

Current Time

Channel

Receivable Broadcast Types (see right)

Sleep Timer time remaining

 Channel & Aspect Display

When you change channels or picture (aspect) mode, the

channel number or picture mode will be displayed.

The following are possible audio broadcast types and on-screen

displays.

1 Press DISPLAY to display the broadcast signal

being received.

 MTS Stereo broadcast:

Multi-channel Television Sound Stereo broadcast. Select

STEREO audio mode.

• If stereo broadcast is weak and the display flickers, select

MONO audio mode for possible improvement.

 SAP broadcast:

Secondary Audio Program (sub language).

Select SAP audio mode for the sub language.

 MONO broadcast:

Normal monaural sound broadcast.

 MTS Stereo and SAP broadcast:

Multi-channel Television Sound Stereo (main language) and

Secondary Audio Program (sub language) broadcasts are being

received simultaneously. Select the STEREO or SAP audio

mode.

1 Press AUDIO to select the desired audio mode as

described above.

• Each press of AUDIO will change the audio mode as shown below.

< Example >

Equipped with -TV Noise Reduction for true MTS

reproduction.

-TV Noise Reduction is required for good

stereo separation and audio fidelity.

is a registered

trademark, and is licensed by

Technology Licensing.

Audio Mode for TV Viewing

Receivable Broadcast Types

NORMAL

STEREO



SAP MONO

STEREO



SAP MONO

JUST 12:34PM CH 12

STEREO

SAP

MONO

JUST 12:34PM CH 12

STEREO

SAP

MONO

JUST 12:34PM CH 12

STEREO

SAP

MONO

JUST 12:34PM CH 12

STEREO

SAP

MONO

FULL 12:34PM COMPONENT

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 Top view

Input Label

ADJ. SET UP FUNC.

LANGUAGE

PROGRAM CH

CLOCK

LOCK

CLOSED CAPTION

INPUT LABEL

OTHER ADJUST

PAGE

RETURN

SELECT

You can change the video input labels displayed on the screen to

match the connected device (VCR, DVD player etc.).

1 Press MENU.

2 Press ◄► to select “SET UP”.

3 Press ▲▼ to select “INPUT LABEL” and press

ENTER.

4 Press ▲▼ to select the video input, then press ◄►

to select the INPUT LABEL.

(VIDEO1/VIDEO2/COMPONENT/HDMI, VCR, LD, GAME, DVD, DTV,

[BLANK] and SKIP*)

* Select to SKIP unused video input when pressing INPUT button.

In the United States, the V-CHIP consists of two rating systems,

which are MPAA (MOTION PICTURE) and TV PARENTAL

GUIDELINES. Its function is to block programs by the rating data

in the XDS data packets sent from broadcasting stations. The user

can select which rating programs should be blocked by the LOCK

MENU options.

1 Press MENU.

2 Press ◄► to select “SET UP.”

3 Press ▲▼ to select “LOCK” and press ENTER.

ADJ. SET UP FUNC.

LANGUAGE

PROGRAM CH

CLOCK

LOCK

CLOSED CAPTION

INPUT LABEL

OTHER ADJUST

PAGE

RETURN

SELECT

4 Press NUMBER keys to input 4-digit code.

• To clear the numbers while entering the code, press ▲▼.

• You will need the code to enter the LOCK menu.

• After entering your password for the first time, ENTER CODE FIRST

will change to CHANGE CODE.

RETURN

RETRY

LOCK

BLOCK PROGRAMS:

U.S. MOVIES

STATUS OFF ON

CHANGE SETTING

ENTER CODE FIRST

_ _ _

Notes:

• Use a code that is easy to remember and record it in a safe place.

• If you forget your secret code, refer to “Reset all unit Memory Functions”

on page 24.

5 Press ▲▼ to select “BLOCK PROGRAMS.”

6 Press ◄► to select “U.S. MOVIES,” “U.S.

TV PROGRAMS,” “CANADIAN ENGLISH,” or

“CANADIAN FRENCH.”

7 Press ▲▼ to select “STATUS” and press ◄► to

select “ON” or “OFF.”

LOCK

BLOCK PROGRAMS:

U.S. TV PROGRAMS

STATUS OFF ON

CHANGE SETTING

CHANGE CODE

_ _ _ _

CHANGE

RETURN

SELECT

LOCK

BLOCK PROGRAMS:

U.S. TV PROGRAMS

STATUS OFF ON

CHANGE SETTING

CHANGE CODE

_ _ _ _

CHANGE

RETURN

SELECT

V-Chip Control Features

▲▼◄►

NUMBER keys

INPUT

MUTE

ENTER

TV Settings

INPUT

CHANGE

RETURN

SELECT

INPUT LABEL

VIDEO1 VIDEO1

VIDEO2 VIDEO2

COMPONENT COMPONENT

HDMI HDMI

TV Operation

8 Press ▲▼ to select “CHANGE SETTING” and press

ENTER to enter the next menu.

LOCK

BLOCK PROGRAMS:

U.S. TV PROGRAMS

STATUS OFF ON

CHANGE SETTING

CHANGE CODE

_ _ _ _

RETURN

SELECT

9 Press ▲▼ to select “VIEW NR PROGRAMS?” and

press ◄► to select “NO” or “YES.”

NO: Cannot view programs with NR signals.

YES: Can view programs with NR signals.

Press ▲▼ to select “SETTING” and press ◄► to

select “BASIC” or “DETAILED.”

U.S. TV PROGRAMS

VIEW NR PROGRAMS?

NO YES

SETTING BASIC

TV-Y

TV-Y7 FV

TV-G

TV-PG V S L D

TV-14 V S L D

TV-MA V S L

CHANGE

RETURN

SELECT

U.S. TV PROGRAMS

VIEW NR PROGRAMS?

NO YES

SETTING BASIC

TV-Y

TV-Y7 FV

TV-G

TV-PG V S L D

TV-14 V S L D

TV-MA V S L

CHANGE

RETURN

SELECT

BASIC:

You can select the titles.

DETAILED:

You can select the titles and options.

Press ▲▼ to select the rating.

• When a title field is selected, all ratings below this rating are

selected.

• When options within an option field are selected, ratings below this

rating within the same field are selected.

Press ◄► to lock or unlock the rating.

Lock (Red): Cannot view programs with NR signals.

Unlock (Green): Can view programs with NR signals.

 U.S. MOVIES RATINGS

G General audience

PG Parental guidance suggested

PG-13 Parental guidance needed under 13 years old

R Restricted

NC-17 No one under 17 is admitted

X Pornography

U.S. TV PROGRAMS only

2. Ratings for teenagers: Created out of these major categories

to form various combinations. These combinations are

described in the below diagram. Ratings for all ages are on top

and ratings for adults are on the bottom.

 U.S. TV PROGRAMS RATINGS

1. Ratings for children: Divided into ranks as follows.

TV-Y

TV-Y7 FV TV-Y TV-Y7 TV-Y7-FV

TV-G

TV-PG

TV-14

TV-MA

Age-based

Group

Age-based

Ratings

Possible Content Selections

NR (Not Rated) TV-NR

• Viewable

• Blocked

Youth

TV-Y

• Viewable

• Blocked

TV-Y7

• FV (Fantasy Violence)

• Viewable

• Blocked

Guidance

TV-G

• Viewable

• Blocked

TV-PG

• D, L, S, V (all selected)

• Any combination of D, L, S, V

TV-14

• D, L, S, V (all selected)

• Any combination of D, L, S, V

TV-MA

• L, S, V (all selected)

• Any combination of L, S, V

Chart 1

TV-NR Not Rated.

TV-Y

All Children. The themes and elements in this program are

specifically designed for a very young audience including

children from ages 2-6.

TV-Y7

Directed to older children. Themes and elements in this program

may include mild physical or comedic violence or may frighten

children under the age of 7.

TV-G

General Audience. It contains little or no violence, no strong

language, and little or not sexual dialogue or situations.

TV-PG

Parental guidance suggested. The program nay contain

infrequent coarse language, limited violence, some suggestive

sexual dialogue and situations.

TV-14

Parents strongly cautioned. This program may contain

sophisticated themes, sexual content, strong and explicit sexual

content.

TV-MA

Mature Audiences only. This program may contain mature

themes, profane language, graphic violence and explicit sexual

content.

Chart 2

(Continued on next page.)

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Exempt - Exempt programming includes: news, sports,

documentaries and other information programming, talk shows,

music videos, and variety programming.

Programming intended for children under age 8. No offensive

language, nudity or sexual content.

C8+

Programming generally considered acceptable for children 8

years and over. No profanity, nudity or sexual content.

G General programming, suitable for all audiences.

Parental Guidance suggested. Some material may not be

suitable for children.

14+

Programming contains themes or content which may not be

suitable for viewers under the age of 14. Parents are strongly

cautioned to exercise discretion in permitting viewing by pre-

teens and early teens.

18+

18+ years old. Programming restricted to adults. Contains

constant violence or scenes of extreme violence.

 CANADIAN ENGLISH RATINGS

E Exempt - Exempt programming.

General - Programming intended for audience of all ages.

Contains no violence, or the violence content is minimal or is

depicted appropriately.

8ANS+

8+ General - Not recommended for young children.

Programming intended for a broad audience but contains light

or occasional violence. Adult supervision recommended.

13ANS+

Programming may not be suitable for children under the age

of 13 - Contains either a few violent scenes or one or more

sufficiently violent scenes to affect them. Adult supervision

strongly suggested.

16ANS+

Programming may not be suitable for children under the age of

16 - Contains frequent scenes of violence or intense violence.

18ANS+

18+ years old. Programming restricted to adults. Contains

constant violence or scenes of extreme violence.

 CANADIAN FRENCH RATINGS

FV Fantasy-Cartoon Violence.

V Violence

S Sex

L Offensive Language

D Dialogue with sexual content.

Chart 3

If a program or movie exceeds the ratings you have set, a message

will appear on a black background and sound is muted.

■ Temporarily Deactivate V-Chip Control

Press NUMBER keys to enter your secret code in the Blocking

Message screen.

• V-Chip Control is reactivated when power is turned off or power

failure occurs.

■ Deactivate V-Chip Control

Blocking Message

To View a Blocked Program/Movie

1 Enter your secret code. (p. 28)

2 Then, set US MOVIES and/or US TV PROGRAMS

and/or CANADIAN ENGLISH LANGUAGE and/or

CANADIAN FRENCH LANGUAGE to “OFF” using

▲▼ and SET. (Ratings set on pages 28~30 are

retained and will be in effect when V-Chip Control is

activated again.)

This unit has a built in decoder that provides a visual depiction

of the audio portion of a television program in the form of written

words across the screen (white or colored letters on a black

background). It allows you to read the dialog of a television program

or other information.

Notes:

• This feature is available only with the 480i input signal and with the

programs including the closed caption.

• The closed caption is not displayed when using HDMI connection (p. 17) or

when you set the aspect to “ZOOM” (p. 26).

• When a disc supporting closed captions is used, the subtitle and the

closed caption may overlap. In this case, turn the subtitle or caption mode

off. (p. 49)

1 Press MENU.

2 Press ◄► to select “SET UP.”

3 Press ▲▼ to select “CLOSED CAPTION” and press

ENTER.

ADJ. SET UP FUNC.

LANGUAGE

PROGRAM CH

CLOCK

LOCK

CLOSED CAPTION

INPUT LABEL

OTHER ADJUST

PAGE

RETURN

SELECT

Closed Caption System

PROGRAM RATING EXCEEDED

ACCESS CODE _ _ _ _

PROGRAM RATING EXCEEDED

ACCESS CODE _ _ _ _

LOCK

BLOCK PROGRAMS:

U.S. MOVIES

STATUS OFF ON

CHANGE SETTING

CHANGE CODE

_ _ _ _

CHANGE

RETURN

SELECT

LOCK

BLOCK PROGRAMS:

CANADIAN ENGLISH

STATUS OFF ON

CHANGE SETTING

CHANGE CODE

_ _ _ _

CHANGE

RETURN

SELECT

TV Operation

C2C1NO

CLOSED CAPTION

ON MUTE NO

MODE OFF

CHANGE

RETURN

SELECT

4 Press ▲▼ to select “

ON MUTE.”

5 Press ◄► to select “NO (OFF)”, “C1” or “C2”.

4 Press ▲▼ to select “

MODE”.

5 Press ◄► to select “OFF”, “C1” or “C2”.

CLOSED CAPTION

ON MUTE NO

MODE OFF

CHANGE

RETURN

SELECT

C2C1OFF

 OFF:

Recommended mode when Closed Caption is not being

used.

 C1:

For video related information that can be displayed (up to 4

lines of script strategically placed on the television screen

so that it does not obstruct relevant parts of the picture).

 C2:

Another mode used for video related information.

Recording and Playing Back a Closed

Caption Program

 Record:

Record normally. Closed Caption signal, if present, is recorded

automatically.

 Playback:

Start playback. Perform steps to select desired caption mode.

 NO:

A narration will not be displayed when MUTE button is

pressed for silence.

 C1 or C2:

A narration of selected TV programs is displayed when

MUTE button is pressed for silence.

ON MUTE

Displays the On-Screen Closed Caption when the MUTE button

is pressed. To delete the closed caption, press the MUTE button

again.

MODE

Displays the On-Screen Closed Caption.

Audio Adjust

1 Press MENU.

2 Press ◄► to select “ADJ.”

3 Press ▲▼ to select “AUDIO ADJUST” and press

ENTER.

ADJ. SET UP FUNC.

PICTURE

PICTURE ADJUST

POSITION/SIZE

AUDIO

AUDIO ADJUST

PAGE

RETURN

SELECT

AUDIO ADJUST PAGE 1/2

NORMAL

MODE STANDARD

BASS 0

TREBLE 0

BALANCE 0

SURROUND OFF ON

D.ENHANCER OFF ON

STEREO SAP MONO

HDMI IN AUTO

CHANGE

RETURN

SELECT

4 Press ▲▼ to select the sub-menu.

5 Press ◄► to select the setting listening the sound.

 NORMAL/NORMALIZE

Select “NORMALIZE” and press ENTER to return each MODE to

the factory default setting.

Notes:

• “NORMAL” means the MODE is in the factory default setting. “NORMAL”

changes to “NORMALIZE” when you change the setting of BASS,

TREBLE, BALANCE, SURROUND, D.ENHANCER or AUDIO LEVELER.

• You can normalize each MODE separately.

 MODE

You can also change “MODE” by pressing AUDIO MODE on the

Remote Control.

AUTO Automatically adjusts for a wide Dynamic Range.

STANDARD Emits the original sound.

DYNAMIC Gives contrast to sound.

(Continued on next page.)

 BASS, TREBLE, BALANCE, SURROUND,

D.ENHANCER

You can change the level of each sub-menu (BASS, TREBLE,

BALANCE, SURROUND, D.ENHANCER) for each MODE

(AUTO, STANDARD and DYNAMIC) according to your personal

preference.

BASS Adjusts low frequencies.

TREBLE Adjusts high frequencies.

BALANCE Adjusts left and right volume.

SURROUND To enjoy a concert hall effect.

D.ENHANCER

The volume of the center channel is raised to make

dialog easier to hear. (DVD playback only)

AUDIO ADJUST PAGE 2/2

NORMAL

AUDIO LEVELER 0

ADJUST

RETURN

SELECT

Note:

• To activate this feature, set

MODE to OFF.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 STEREO / SAP / MONO

• Red display : With signal

White display : No signal

White display (All modes) : MONO

• To change the mode using AUDIO button.

STEREO Two channel Audio reception.

SAP

Second Audio Programming (typically used for bilingual

audio).

MONO Use when stereo signal is weak.

 HDMI

When using HDMI connection (p. 17), this feature will let you

switch between Analog Input and Digital Input.

AUTO Automatically selects Analog / Digital signal.

DIGITAL Digital Input only.

ANALOG Analog Input only.

 AUDIO LEVELER

You can adjust the volume level for each of the input mode (TV,

VIDEO1, VIDEO2, COMPONENT, HDMI and DVD/SD mode).

Picture Adjust

1 Press MENU.

2 Press ◄► to select “ADJ.”

3 Press ▲▼ to select “PICTURE ADJUST” and press

ENTER.

ADJ. SET UP FUNC.

PICTURE

PICTURE ADJUST

POSITION/SIZE

AUDIO

AUDIO ADJUST

PAGE

RETURN

SELECT

5 Press ◄► to adjust the setting watching the picture

behind the menu.

PICTURE ADJUST PAGE 1/2

NORMAL

PIC MODE VIVID

BACK LIGHT 0

PICTURE 0

BRIGHTNESS 0

COLOR 0

TINT 0

SHARPNESS 0

AI PICTURE OFF ON

CHANGE

RETURN

SELECT

6 Press ▲▼ to select “ADVANCED ADJUST” and

press ◄► to select “ON.”

PICTURE ADJUST PAGE 2/2

COLOR TEMP

COOL

ADVANCED ADJUST

OFF ON

CHANGE

RETURN

SELECT

ADJUST

RETURN

SELECT

ADVANCED ADJUST

NORMALIZE

EDGE TRANS. MID

GRAY EMPHASIS MID

GAMMA ADJUST MID

BLACK EXTENSION + 8

WHITE CHAR CORR + 8

7 Press ▼ to display the sub-menu.

 NORMAL/NORMALIZE

Select “NORMALIZE” and press ENTER to return each PIC

MODE to the factory default setting.

Notes:

• “NORMAL” means the PIC MODE is in the factory default setting.

“NORMAL” changes to “NORMALIZE” when you change the setting of

BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS, AI

PICTURE, COLOR TEMP or ADVANCED ADJUST.

• You can normalize each PIC MODE separately.

 PIC MODE

You can also change “PIC MODE” by pressing PICTURE MODE

on the Remote Control.

STANDARD Displays a standard image.

CINEMA Ideal for watching movies in a dark room.

VIVID Displays a clear image with high contrast.

CUSTOM

You can customize the picture settings to suit your

preference. (Refer to “ADVANCED ADJUST” on page

33.)

• PIC MODE setting is stored separately for TV, VIDEO1, VIDEO2,

COMPONENT, HDMI and DVD/SD mode.

4 Press ▲▼ to select the sub-menu.

 BACK LIGHT, PICTURE, BRIGHTNESS, COLOR,

TINT, SHARPNESS, AI PICTURE, COLOR TEMP

You can change the level of each Item (BACK LIGHT, PICTURE,

BRIGHTNESS, COLOR, TINT, SHARPNESS, AI PICTURE and

COLOR TEMP) for each MENU (STANDARD, CINEMA, VIVID

and CUSTOM) according to your personal preference.

Sub-menu Function

BACK LIGHT Luminance of the back light is adjusted.

PICTURE

Selects proper brightness and density for the

room.

BRIGHTNESS

Adjusts for easier viewing of dark pictures such

as night scenes.

COLOR Adjusts the level of color.

TINT Adjusts for flesh tone color.

SHARPNESS Adjusts the degree of sharpness.

AI PICTURE

Displays black and white more accurately when

turned ON.

COLOR TEMP

(Color temperature)

Increases or decreases WARM (red) and COOL

(blue) colors to suit personal preference.

 ADVANCED ADJUST

• “ADVANCED ADJUST” is

displayed only when PIC MODE is

set to CUSTOM.

TV Operation

 ADVANCED ADJUST

(Only when you selected CUSTOM in PIC MODE)

Item Function

EDGE TRANS.

Improves edges in the background to reduce

overshooting and improve the sense of depth.

GRAY EMPHASIS

Emphasizes the sharpness in density of many

color differences.

GAMMA ADJUST

Increases the brightness of the center ranges to

improve detail and contrast in dark scenes.

BLACK EXTENSION Contrast level will be improved.

WHITE CHAR CORR It makes white characters brighter.

Other Adjust

1 Press MENU.

2 Press ◄► to select “SET UP.”

3 Press ▲▼ to select “OTHER ADJUST” and press

ENTER.

ADJ. SET UP FUNC.

LANGUAGE

PROGRAM CH

CLOCK

LOCK

CLOSED CAPTION

INPUT LABEL

OTHER ADJUST

PAGE

RETURN

SELECT

4 Press ▲▼ to select the item.

5 Press ◄► to select the setting.

OTHER ADJUST PAGE 1/2

VIDEO NR

OFF ON

MPEG NR

OFF ON

3D Y/C

OFF ON

COLOR MATRIX

SD HD

CHANGE

RETURN

SELECT

OTHER ADJUST PAGE 2/2

POWER SAVE

SAVING

FRONT DISPLAY

AUTO

CHANGE

RETURN

SELECT

 VIDEO NR

In the event of weak signal conditions, the VIDEO NR circuitry

reduces noise in the luminance channel. It is important to note

that VIDEO NR should remain OFF for maximum picture detail

when receiving a strong signal or viewing high-quality video.

ON When signal is noisy.

OFF When signal is high-quality.

• PIC MODE setting is stored separately for TV, VIDEO1, VIDEO2,

COMPONENT, HDMI and DVD/SD mode.

 MPEG NR

Noise unique to DVD, STB, etc. will be reduced.

 3D Y/C

Minimizes noise and cross color in the picture. Not available for

COMPONENT VIDEO INPUT, HDMI and DVD/SD mode input.

• PIC MODE setting is stored separately for TV, VIDEO1, VIDEO2,

COMPONENT, HDMI and DVD/SD mode.

ON Reduces noise in the picture.

OFF Set to OFF if picture appears unnatural.

ON Usually set to ON.

OFF Set to OFF if picture appears unnatural.

 COLOR MATRIX

Displays input signals (480p signals) in a natural color.

Automatically adjusts color parameters for HD (high definition)

and SD (standard definition).

 POWER SAVE

The POWER SAVE mode is suitable for watching television at

night. Power consumption will be reduced.

 FRONT DISPLAY

SD When the input signal is a normal TV system (NTSC).

HD When the input signal is a High-definition system (HD).

STANDARD

Set to STANDARD normally. The peak brightness is not

reduced and you can view normal lighting transitions in

the picture.

SAVING

The peak brightness of the brightest scenes is reduced

conserving power while giving you a natural picture.

The Front Display brightness is adjustable. To display the clock

even when power is off, please select DIM or BRIGHT.

AUTO

Display is bright only when power is ON. Display goes

out when power is OFF, but lights dimly during recording,

etc.

BRIGHT Display is always bright.

DIM Display is always dim.

OFF Display is always off.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 Front view

Before using Disc/Card Functions

1 Confirm that disc or card is inserted.

2 Press DVD or SD to select the drive.

• The “DVD” or “SD” indicator flashes on the Front Display.

• The DVD or SD indicator on the unit lights.

3 Each operation is carried out.

1 Press OPEN/CLOSE on the unit to open the tray and

insert a disc.

• Press the button again to close the tray.

Insert label-up.

Insert inside the tray’s guide.

 Non-cartridge disc

Insert label-up with the

arrow facing in.

 Cartridge disc

Notes:

• Load double-sided discs so the label for the side you want to record/play is

facing up.

• When using 8 cm (3˝) DVD-RAM, remove the disc from the cartridge and

insert it, making sure you align it with the groove.

Inserting a Disc

Disc tray

Inserting/Removing the Card

Only insert or remove the card after turning

the unit off.

When the “SD” indicator on the unit display is flashing, the card is

being read from or written to. Do not turn off the power or remove

the card. Such action may result in malfunction or loss of the

card’s contents.

 Inserting the Card

Insert the Card (labeled side up, cropped corner

right) and hold in place until you here a click.

cropped corner

 Removing the Card

Press the center of the Card and then pull it

straight out.

Before Using the Disc or Card

DRIVE SELECT

–DVD

DRIVE SELECT

–SD

OPEN/CLOSE

DVD

Indicator

Disc Tray SD Card SlotFront

Display

Disc / Card Operation

 Front view

No display

DVD/SD Functions Window

ADJ. SET UP FUNC.

DVD/SD

PAGE

RETURN

0:50 XP6/8 10:15 PM

T2 0:05.14 XP

T1 0:00.10 SP

Remain

By using the DVD/SD Functions window you may access the main

functions quickly and easily.

 To exit the DVD/SD Functions window

Press RETURN.

Status messages (Disc)

Status messages appear on the television when you operate the

unit to show the condition of the unit.

• About Still Picture, refer to “To display information about the Still Pictures”

on page 54.

1 Press DISPLAY in play mode.

• The display changes each time you press the button.

Disc indication

REC

PLAY

L R

DVD-RAM

Selected audio type

Recording or play status/input

channel

Date and time

Recording mode Available recording time and

recording mode

Play position

Elapsed play time

Elapsed recording time

1 Press MENU in Stop mode, then press ◄► to select

“FUNC.”

2 Press ENTER.

• Opening the DVD/SD Functions Window automatically places unit

into DVD mode.

3 Press ▲▼◄► to select an item and press ENTER.

• Functions displayed depend on the type of disc.

e.g., DVD-RAM

Function

The same operation with

Remote Control Button

Pages

DIRECT NAVIGATOR DIRECT NAVIGATOR 45, 51~53

TIMER RECORDING PROG/CHECK 40~41

DUBBING 64~66

FLEXIBLE RECORDING F REC 39

PLAY LIST 57~59

SET UP DVD SETUP 67~69

DISC SETTING 60~62

e.g., SD CARD

Function

The same operation with

Remote Control Button

Pages

DIRECT NAVIGATOR DIRECT NAVIGATOR 54~56

TIMER RECORDING PROG/CHECK 40~41

DUBBING 64~66

COPY ALL PICTURES 66

SET UP 67~69

CARD SETTING 60~61

e.g., DVD-RAM

DVD/SD Functions Windows and Status Messages

DVD

Play back

Record

Dubbing

/ Edit

Set up

DISC PROTECTION OFF

CARTRIDGE PROTECTION OFF

DVD-RAM

DIRECT NAVIGATOR

TIMER RECORDING

DUBBING

PLAY LIST

SETUP

FLEXIBLE RECORDING

DISC SETTING

▲▼◄►

DISPLAY

ENTER

DVD-A VCD CDDVD-R DVD-VRAM MP3

RETURN

Disc Tray SD Card Slot

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Disc Type Available Function Page

RAM

Playback

Start from a selected item

(using NUMBER keys)

Fast forward and rewind (Search) 45

Skip a program or track 45

Quick View 46

Slow-motion playback 46

Frame-by-frame viewing 46

Skip a minute forward (CM Skip) 45

Display the television image as a picture-in-

picture

Skip the specified time (Time Slip) 46

Repeat playback 50

Create Chapters 48

Select subtitle on/off 49

Change audio during play 48

Erase a program that is being played back 47

Play with Direct

Navigator/Play List

Play the recorded programs

(DIRECT NAVIGATOR)

45, 51

Play the created chapters

(DIRECT NAVIGATOR)

Play Still Pictures (DIRECT NAVIGATOR) 54

Play the created play lists (PLAY LIST) 57

Play the created chapters of Play List

(PLAY LIST)

Recording

Timer Recording 40~41

Flexible Recording 39

Play from the beginning of the title you are

recording (Chasing playback)

Simultaneous Recording and Play 42

Review the recorded images while recording

(Time Slip)

42~43

Erase or Edit a program with Direct Navigator/

Play List

Erase the selected programs 52

Display information about the recorded date/

time/channel, etc.

Enter a title name to a program 52

Protect the title from accidental erasure 52

Select and erasing unnecessary parts of the

programs

Change an image to be shown as a thumbnail

picture in the Title View

Select a point at which to divide the title into

two.

Edit chapters in the DIRECT NAVIGATOR 53

Create play lists 57~58

Edit play lists 58~59

Edit chapters in the PLAY LIST 59

Playback Still

Pictures

Display still pictures one by one with constant

interval (Slide Show)

Rotate a still picture 55

Enlarge a still picture (Zoom in/Zoom out) 55

Disc Type Available Function Page

RAM

Erase or Edit Still

Pictures

Erase still pictures 55

Display information about the still picture 54

Change a folder name 56

Protect the still picture from accidental erasure 56

Transfer (dubbing) still pictures

(Card ↔ DVD-RAM)

64~66

Disc Setting

Enter the Disc name 60

Protect the Disc from accidental erasure 60

Erase all titles or play lists 60~61

Format a Disc 61

DVD-R

Playback

Start from a selected item

(using NUMBER keys)

Fast forward and rewind (Search) 45

Skip a program or track 45

Slow-motion playback 46

Frame-by-frame viewing 46

Skip a minute forward (CM Skip) 45

Display the television image as a picture-in-

picture

Skip the specified time (Time Slip) 46

Repeat playback 50

Select subtitle on/off 49

Erase a program that is being played back 47

Play with Direct

Navigator

Play the recorded programs

(DIRECT NAVIGATOR)

45, 51

Recording

Timer Recording 40~41

Flexible Recording 39

Erase or Edit a program

with Direct Navigator

Erase the selected programs 52

Display information about the recorded date/

time/channel, etc.

Enter a title name to a program 52

Change an image to be shown as a thumbnail

picture in the Title View

Disc Setting

Enter the Disc name 60

Select whether to show the top menu after

finalizing the disc

A process that makes play of a recorded

DVD-R possible on equipment that can play

such media. (Finalize)

Function List

Disc / Card Operation

Disc Type Available Function Page

DVD-A

Playback

Start from a selected item

(using NUMBER keys)

Fast forward and rewind (Search) 45

Skip a program or track 45

Slow-motion playback 46

Frame-by-frame viewing 46

Repeat playback 50

Change the sound track language 49

Select subtitle language 49

Select the angle 49

DVD-V

Playback

Start from a selected item

(using NUMBER keys)

Fast forward and rewind (Search) 45

Skip a program or track 45

Slow-motion playback 46

Frame-by-frame viewing 46

Repeat playback 50

Change the sound track language 49

Select subtitle language 49

Select the angle 49

MP3

Playback

Start from a selected item

(using NUMBER keys)

Fast forward and rewind (Search) 45

Skip a program or track 45

Play MP3 files recorded on CD-R/RW with a

computer. (MP3 only)

Repeat playback 50

VCD

Playback

Start from a selected item

(using NUMBER keys)

Fast forward and rewind (Search) 45

Skip a program or track 45

Slow-motion playback 46

Frame-by-frame viewing 46

Repeat playback 50

Playback Control on/off 49

Change audio during play 48

Disc Type Available Function Page

Playback Still

Pictures

Display still pictures one by one with constant

interval (Slide Show)

Rotate a still picture 55

Enlarge a still picture (Zoom in/Zoom out) 55

Erase or Edit Still Pictures

Erase still pictures 55

Display information about the still picture 54

Change a folder name 56

Protect the still picture from accidental

erasure

Set the number of images to be printed

(DPOF)

Transfer (dubbing) still pictures

(Card ↔ DVD-RAM)

64~66

Card

Setting

Format a Card 61

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 Front view

• It is not possible to record continuously from one side of a double sided

disc to the other. You will need to eject the disc and turn it over.

• When using 8 cm (3″) DVD-RAM, remove the disc from the cartridge.

• You can record up to 99 titles on one disc.

• You can record digital broadcasts that allow “one time only recording”

when using CPRM (p. 70) compatible DVD-RAM discs. And you cannot

record digital broadcasts that allow “one time only recording” when using

DVD-R.

• DVD-RAM/DVD-R have limitations on recording (pp. 8~10).

• Recording will take place on open space on the disc. Data will not be

overwritten.

• If there is no space left on the recording disc, you will need to erase

unwanted titles (pp. 47, 52) or use a new disc.

• You cannot record on finalized DVD-R discs.

1 Press OPEN/CLOSE on the unit to open the tray and

insert a disc. (p. 34)

• Press the button again to close the tray.

•

RAM

When using a DVD-RAM for the first time with this unit,

format it to ensure accurate recording. (Refer to “Format Disc” on

page 61.)

2 Press CH ▲▼ or NUMBER keys to select the

channel.

3 Press REC MODE to select the recording mode. (See

next page.)

4 Press REC to start recording.

• You cannot change the channel or recording mode during recording.

• You can change the audio being received by pressing AUDIO during

recording.

 To stop recording

Press STOP.

• Recorded as 1 title until the position where stopped.

•

DVD-R

It takes about 30 seconds for the unit to complete

recording management information after recording finishes.

 To pause recording

Press PAUSE.

Press again to restart recording.

 To select with the NUMBER keys:

 To specify a time to stop recording

During recording

Press REC on the unit or the Remote Control to select the

recording time.

Each time you press the button:

• This does not work during timer recordings (pp. 40~41) or while

using Flexible Recording (p. 39).

• Recording stops and the set time is cleared if you press STOP.

• The set time is cleared if you change the recording mode or

channel while recording is paused.

Recording

e.g., When you select

channel 4

e.g., When you

select “XP”

* To record sound using LPCM (possible only in XP mode):

Select “LPCM” in “Audio for XP Recording” (the picture quality may

go down slightly). (p. 69)

Preparation

• Release protection before proceeding:

- Cartridge (p. 9)

RAM

- Disc (p. 60)

RAM

OFF 0:30 1:00 1:30

2:004:00 3:00

CH ▲▼

PAUSE

REC MODE

REC

AUDIO

STOP

NUMBER keys

OPEN/CLOSE

Front Display

DVD-RRAM

XP*

LP EP

Recording television programs

e.g., 5: [0] → [5]

15: [1] → [5]

115: [1] → [1] → [5]

▲▼◄►

ENTER

F REC

RETURN

Disc / Card Operation

Recording modes and approximate recording

times

Depending on the content being recorded, the recording times may

become shorter than indicated.

Note:

• When recording to DVD-RAM using “EP (8 H)” mode, play may not be

possible on DVD players that are compatible with DVD-RAM. In this case

use “EP (6 H)” mode.

FR (Flexible Recording Mode) (See right)

The unit automatically selects a recording rate between XP and EP

(8 H) that will enable the recordings to fit in the available recording

time on the disc with the best possible recording quality.

• You can set when programming timer recordings.

• All the recording modes from XP to EP appear in the display.

(Unit: hour)

EP (6 H)

EP (8 H)

Picture quality

Recording time

Selecting audio to record

DVD-RAM

DVD-R

(4.7 GB)

Single-sided

(4.7 GB)

Double-sided

(9.4 GB)

XP (High quality) 12

SP (Normal) 24

LP (Long play) 48

EP (Extra long play) 8 (6

) 16*1 (12

*1*2

) 8 (6

)

Disc

Recording

Mode

• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by

the unit or the disc.

Flexible Recording (FR)

The unit calculates a recording rate that enables the recording to fit

in the time you set (within the remaining time on the disc) with the

best picture quality.

Recorded Remain

45 minutes in

SP mode

60 minutes

Program to be recorded

Perfectly fit!

Recording rate

between SP and LP

e.g., DVD-RAM

2 Press ◄► to select “Hour” and “Min.” and press

▲▼ to set the recording time.

• You can also set the recording time with the NUMBER keys.

• Maximum recording time is 8 hours.

3 Press ▲▼◄► to select “Start” and press ENTER to

start recording.

• Recording starts.

• The recording mode becomes FR mode.

 To exit the screen without recording

Press RETURN.

 To stop recording partway

Press STOP.

1 Press F REC in Stop mode.

• You can also select “FLEXIBLE RECORDING” on the DVD/SD

Functions Window. (p. 35)

Record in FR mode

Maximum rec time 3 Hour 00 Min.

Set recording time 3 Hour 00 Min.

Start Cancel

FLEXIBLE REC

Note:

• It is not possible to change channel or recording mode while Flexible

Recording is paused.

DVD-RRAM

Preparation

• Select the channel to record.

Recording time of double-sided disc is sum total of both sides of disc.

When “Recording time in EP mode” (p. 68) is set to “EP (6 H)” in the

SETUP menu. The sound quality is better when using “EP (6 H)” than

when using “EP (8 H)”.

DVD-RRAM

Select whether to record the main or secondary audio type (SAP)

when recording to DVD-R or DVD-RAM. (You cannot change

secondary audio when recording audio to DVD-R or DVD-RAM

from an external source.) (p. 69)

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 Front view

1:58 SPRemaining Recording Time

3/29 MON 12:53 PM

TIMER

RECORDING

MODE

OFFONCHANNEL DATE

New Timer Program

5:10 PM4:20 PM SP

CHECK

01 3/29 MON

Timer Recording

You can enter up to 16 programs up to a month in advance.

• When connecting a cable TV box or satellite receiver, the VCR Plus+

system does not work. Program the timer recording manually. (pp. 40~41)

Using VCR Plus+ system

Entering VCR Plus+ number is an easy way of timer recording. You

can find these codes in TV listings in newspapers and magazines.

1 Press VCR Plus+.

2 Press NUMBER keys to enter the VCR Plus+

number.

• Press ◄ to move back to correct a digit.

3 Press ENTER.

• When “XP” is displayed in the unit’s display, the recording mode

automatically changes to “FR” in order to prevent loss of recording

when there is not enough space. Change to “XP” mode if you want to

set the timer recording using “XP” mode.

• Confirm the program and make corrections if necessary using

▲▼◄►. (See step 3 on next page.)

• You can also press REC MODE to change the recording mode.

• To enter the title of the program

Press ◄► to select “Enter Name” and press ENTER. (p. 63)

4 Press ENTER.

• The setting are stored.

Check to make sure “OK”

is displayed.

5 Press RETURN.

• “ ” lights on the Front Display to indicate timer recording standby

has been activated.

 To cancel recording when recording has already

begun

Hold down STOP for a few seconds.

You can enter up to 16 programs up to a month in advance.

(Each daily or weekly program is counted as one program.)

• When connecting a cable TV box or satellite receiver, select the channel

on the cable TV box or satellite receiver before timer recording starts.

1 Press PROG/CHECK.

2 Press ▲▼ to select “New Timer Program” and press

ENTER.

Manually programming

• Repeat steps 1~4 to program other recordings.

1:58 SPVCR Plus+ Remaining Recording Time

3/29 MON 12:53 PM

Enter the PLUS CODE with the numbered buttons.

No.

1:58 SPRemaining Recording Time

3/29 MON 12:53 PM

TIMER

RECORDING

MODE

OFFONCHANNEL DATE

5:10 PM4:20 PM3/29 MON 39 SP

Enter Name

1:58 SPRemaining Recording Time

3/29 MON 12:53PM

TIMER

RECORDING

MODE

OFFONCHANNEL DATE

New Timer Program

5:10 PM4:20 PM SP

CHECK

01 3/29 MON

Press ENTER or VCR Plus+ to

store new program.

Preparation

• Release protection before proceeding:

- Cartridge (p. 9)

RAM

- Disc (p. 60)

RAM

• Insert a disc (p. 34) and confirm there is sufficient empty space for

recording on it (p. 35). You can also confirm the disc information. (p. 60)

 Caution for Timer recording

Timer recording automatically starts at the set time.

• Timer recording can be started whether the unit is turned on

or off. When the unit is turned off, the sound and the video

cannot be outputted to the TV.

Highlighted line is ready for

programming.

ENTER

REC MODE

NUMBER keys

CANCEL

STOP

▲▼◄►

PROG/CHECK

VCR Plus +

Front Display

DVD-RRAM

RETURN

Disc / Card Operation

1:58 SPRemaining Recording Time

3/29 MON 12:53 PM

TIMER

RECORDING

MODE

OFFONCHANNEL DATE

New Timer Program

5:10 PM4:20 PM SP

CHECK

01 3/29 MON

64 8:00 PM7:00 PM SP

02 4/5 MON

Notes:

• “ ” flashes when the unit cannot go to timer recording standby (e.g., a

recordable disc is not in the disc tray). Check the disc carefully.

• The actual time recorded may be longer than the program itself when

television programs are recorded using VCR Plus+ system.

• When you program successive timer recordings to start immediately

one after the other, the unit cannot record the part at the beginning of

the later programs (a few seconds when recording with DVD-RAM and

approximately 30 seconds when recording with DVD-R).

• If you DST (Daylight Saving Time) to On when manually setting the clock

(p. 23), timer recording may not work when summer switches to winter and

vice versa.

• When the unit is carrying out a timer recording:

- You may utilize playback.

• When the disc is not inserted, the disc is full or a non-recordable disc

is inserted, the warning message appears because Timer Recording is

disabled.

• During Timer Recording, dubbing and editing are disabled.

• Timer recordings are automatically placed in order of DATE → ON (Start

Time).

• If timer recording times overlap, the program with the earliest start time

is recorded first. The overlapped portion of the later program will not be

recorded.

• Press and hold ▲▼ to alter the Start (Start time) and Stop (Finish

time) in 30-minute increments.

• You can also set CHANNEL (Program Position/TV Station Name),

DATE (See below), ON (Start time), and OFF (Finish time) with the

NUMBER keys.

• You can also press REC MODE to change the recording mode.

• Date

Date

Daily timer

Weekly timer

Current date up to one month later

minus on day

SUN-SAT→MON-SAT→MON-FRI

WEEKLY SUN→---→WEEKLY SAT

4 Press ENTER.

3 Press ► to move through the items and change the

items with ▲▼.

Check to make sure “OK”

is displayed.

5 Press RETURN.

• “ ” lights on the Front Display to indicate timer recording standby

has been activated.

 To cancel recording when recording has already

begun

Hold down STOP for a few seconds.

• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by

the unit or the disc.

1:58 SPRemaining Recording Time

3/29 MON 12:53 PM

TIMER

RECORDING

MODE

OFFONCHANNEL DATE

8:00 PM7:00 PM4/5 MON64

Enter Name

• Repeat steps 2~4 to program other recordings.

• Enter Name:

Press ◄► to select “Enter Name” and press ENTER. (p. 63)

1:58 SPRemaining Recording Time

3/29 MON 12:53 PM

TIMER

RECORDING

MODE

OFFONCHANNEL DATE

New Timer Program

CHECKNO

Press ENTER or VCR Plus+ to

store new program.

Check, change or delete a program

1 Press PROG/CHECK.

 To change a program

Press ▲▼ to select the program and press ENTER.

Press ◄► to move through the items and change the items with

▲▼, then press ENTER.

 To delete a program

Press ▲▼ to select the program and press CANCEL.

• You cannot delete programs that are currently recording.

 To put the unit on timer recording standby

Press RETURN.

• “

” lights on the Front Display to indicate timer recording

standby has been activated.

Notes:

• Programs that failed to record are displayed gray. They are automatically

deleted from the timer recording list at 4 a.m. two days later.

• During timer recording, you can change the end time as long as the

recording mode is not “FR”.

Icons

This program is currently recording.

The times overlap those in another program. Recording of the

program with the later start time starts when the earlier program

finishes recording.

You stopped a weekly or daily timer recording. The icon

disappears the next time the timer starts recording.

The disc was full so the program failed to record.

The material was copy-protected so it was not recorded.

The program did not complete recording because the disc is dirty

or some other reason.

Message displayed in the CHECK line

OK: Displayed if the recording can fit in the remaining space.

→ (Date): For recordings made daily or weekly, the display will show

until when recordings can be made (up to a maximum

of one month from the present time) based on the time

remaining on the disc.

! : It may not be possible to record because:

• the disc is write-protected

• there is not enough space left

• the number of possible titles has reached its maximum.

2 Press RETURN.

• The timer recording list disappears.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 Front view

Preparation

• Select the channel to record.

• Release protection before proceeding:

- Cartridge (p. 9)

RAM

- Disc (p. 60)

RAM

NUMBER keys

STOP

▲▼◄►

REC MODE

REC

RETURN

ENTER

PAUSE

1 Press PLAY/×1.3 while recording or timer recording.

• TIME SLIP Indicator on the unit lights.

Chasing playback

You can start play from the beginning of the title while continuing to

record it.

 To stop play

Press STOP.

 To stop recording

Press STOP. Wait 2 seconds, press STOP again.

 To stop timer recording

Press STOP. Wait 2 seconds, hold down STOP for a few

seconds.

Notes:

• Sound is not output while fast-forwarding.

• Play cannot be started until at least 2 seconds after recording starts.

PLAY/×1.3

TIME SLIP

DIRECT

NAVIGATOR

TIME SLIP Indicator

1 Press DIRECT NAVIGATOR while recording or timer

recording.

2 Press ▲▼◄► to select a title and press ENTER.

• TIME SLIP Indicator on the unit lights.

Simultaneous Recording and Play

You can start play of the title you are recording or play a title

previously recorded.

 To stop play

Press STOP.

 To exit the DIRECT NAVIGATOR screen

Press DIRECT NAVIGATOR.

 To stop recording

First, press STOP to stop play. Then, exit DIRECT NAVIGATOR,

wait 2 seconds, and press STOP again.

 To stop timer recording

First, press STOP to stop play. Then, exit DIRECT NAVIGATOR,

wait 2 seconds, and hold down STOP for a few seconds.

Notes:

• Sound is not output while fast-forwarding.

• During simultaneous recording and play, you cannot edit or erase with the

Direct Navigator or play lists.

• If you start play while the unit is on standby for timer recording, recording

starts when the time you set is reached.

07 08

- - - - -

10 10/27 Mon 8 10/27 Mon

DIRECT NAVIGATOR Title View

DVD-RAM

●: Currently recording

Selecting title 07

e.g.,

You want to watch the movie you

recorded yesterday (title 07) while

recording sport (title 08).

Title 07 is played back while title 08 is

being recorded.

0 min

PLAY

REC

1 Press TIME SLIP while recording or timer recording.

• TIME SLIP Indicator on the unit lights.

• Play starts from 30 seconds previous to that moment. What is

currently being recorded appears as a picture-in-picture and you will

hear the playback audio.

• Time Slip becomes unavailable if any V-Chip setting is made in the

LOCK item of the SET UP.

Play starts from

30 seconds previous.

The current recording

images.

You can play the title being recorded to check that it is being

recorded correctly. You can also check parts that were recorded

previously.

Time Slip

Playing while you are recording

RAM

Various Recording

INPUT

Disc / Card Operation

2 Press ▲▼ to select the time and press ENTER.

• The time indicator will go off after about 5 seconds, but will turn on

again when you set the indicator.

• Press ▲▼ to alter in 1-minute units. Press and hold ▲▼ to alter in

10-minute units.

 To stop play

Press STOP.

 To stop recording

Press STOP. Wait 2 seconds, press STOP again.

 To stop timer recording

Press STOP. Wait 2 seconds, hold down STOP for a few

seconds.

-5 min

PLAY

REC

 To show the play images in full

Press TIME SLIP.

• Press TIME SLIP to return to the picture-in-picture screen.

Note:

• The image on the small screen may be distorted or flicker depending on

the scene. However, this does not affect the image recorded.

Recording from a video cassette

recorder

Preparation

• Connect a video cassette recorder to this unit’s input terminals.

Notes:

• When recording using this unit’s input terminals, only the sound received

at the time of recording will be recorded. As long as secondary audio that

is recorded on the video cassette is not output on the unit in play, it is not

recorded.

• Recording cannot be done when input is Component or HDMI.

e.g., Connecting the L2 input terminals

 To skip unwanted parts

Press PAUSE to pause recording. (Press again to restart

recording.)

 To stop recording

Press STOP.

Almost all videos and DVD software on sale have been

treated to prevent illegal copying. Any software that has

been so treated cannot be recorded using this unit.

This unit

VIDEO S VIDEO

AUDIO

If the audio output of the other equipment is monaural, connect to

L/MONO.

* The S-VIDEO terminal achieves a more vivid picture than the VIDEO

terminal.

Other video equipment

Audio/Video cable

1 Press INPUT to select the input channel for the

equipment you have connected in Stop mode.

2 Press REC MODE to select the recording mode (XP,

SP, LP or EP).

• Using Flexible Recording (p. 39), you can save content of a video

cassette to 1 disc with the best possible quality of recording without

wasting disc space.

3 Start play on the other equipment.

4 Press REC.

• Recording starts.

Yellow

S-Video cable*

DVD-RRAM

Red White

• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by

the unit or the disc.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 Front view

• It is not possible to play continuously from one side of a double sided disc

to the other. You will need to eject the disc and turn it over.

• When using 8 cm (3″) DVD-RAM, remove the disc from the cartridge.

1 Press OPEN/CLOSE on the unit to open the tray and

insert a disc. (p. 34)

• Press the button again to close the tray.

2 Press PLAY/×1.3.

• The unit takes some time to read the disc before play starts.

•

RAM

DVD-R

Play starts from the most recently recorded title.

•

DVD-V

DVD-A

VCD

MP3

Play starts from the beginning of the disc.

Playing Discs

 To stop play

Press STOP.

•

DVD-V

DVD-A

VCD

MP3

Press STOP again to return to the television screen.

• When “PLAY” flashes on the Front Display, resume function is

active. (See below.)

• The screen saver may appear when you stop play. Press

STOP again and you can use this unit’s tuner to watch

television.

 To pause play

Press PAUSE.

• Press again to restart play.

When a menu screen appears on the

television

1 Press ▲▼◄► to select the item and press ENTER.

• Some items can also be selected using the NUMBER keys.

 To return to the menu screen

DVD-A

: Press TOP MENU.

DVD-V

: Press TOP MENU or SUB MENU.

VCD

: Press RETURN.

1 Press NUMBER keys to select the item.

e.g., 5: [0] → [5] 15: [1] → [5]

Front Display Disc Tray

PAUSE

PLAY/×1.3

SUB MENU

▲▼◄►

TOP MENU

STOP

NUMBER keys

OPEN/CLOSE

DVD-A VCD CDDVD-R DVD-VRAM MP3

DVD-A DVD-V

VCD

 To cancel the resume function (Normal play only)

Press STOP while the unit remembers the position. (The position

is also cleared when you turn the unit off.)

Starting play from where you stopped

it (Resume Function)

DVD-A VCD CDDVD-R DVD-VRAM MP3

1 Press STOP during play.

• “PLAY” flashes on the unit’s display (Normal play only). The unit

memorizes the position.

2 Press PLAY/×1.3.

• Play starts from where you stopped it.

Notes:

•

DVD-V

DVD-A

VCD

Depending on the disc, playback may start automatically.

•

RAM

If cartridge protection is activated (p. 9), play begins automatically

when you close the tray.

•

DVD-V

DVD-A

VCD

If an interactive Disc is used, the DVD Main Menu appears.

•

MP3

If a menu screen is used, it is possible to playback looking at disc

tree view. (p. 47)

Notes:

• If “ ” appears on the screen, the operation is prohibited by the unit or

disc.

• The operation is different by disc. Please follow the guidance of the

screen.

Disc / Card Operation

 Top view

Selecting recorded programs (titles) to

play

1 Press DIRECT NAVIGATOR.

2 Press ▲▼◄► to select the title and press ENTER.

• You can also select titles with the NUMBER keys.

DIRECT NAVIGATOR screen icons

Title protected.

Title that was not recorded due to recording protection (Digital

broadcasts etc.)

Title cannot be played because data is damaged.

Currently recording.

 To stop play

Press STOP.

 To erase a title during play (p. 52)

Press ERASE.

Press ◄► to select “Erase” and press ENTER.

 To edit

See pages 51~53.

 To exit the screen

Press RETURN or DIRECT NAVIGATOR.

Fast forward and rewind (Search)

1 Press ►► FF/SLOW or ◄◄ REW/SLOW during play.

• On the unit, hold down ►►Ι or Ι◄◄ .

• The speed increases up to 5 steps.

• Press PLAY/×1.3 to restart play.

• Sound is output only in the first level of fast forward. In the case of

DVD-A (except moving picture parts), CD and MP3, it is output in all

levels.

• You can turn off the sound during search. (Refer to “Search Audio &

PLAY ×1.3” on page 69.)

• Press PLAY/×1.3 to return to normal speed.

Skipping

1 Press SKIP ►►Ι or SKIP Ι◄◄ during play or while

paused.

• On the unit, press ►►/►►Ι or Ι◄◄ /◄◄ .

• Each press increases the number of skips.

• Pressing Ι◄◄ or ►►Ι while the playback control feature on Video

CDs (p. 70) is working may take you to a menu screen.

Preparation

• Insert a disc that has been recorded on.

Play

SUB MENU

07 08

- -

- - - - - -

10 10/27 Mon 8 10/27 Mon

Previous Next

Select

DIRECT NAVIGATOR Title View

DVD-RAM

02/02

VIDEO PICTURE

• If you enter a number larger than the total number of titles, the last

title is selected.

Skipping a minute forward (CM Skip)

1 Press CM SKIP during play.

• Play restarts from approximately a minute later.

Note:

• If the start of the next program is within one minute of the point you

skipped from, play restarts from the beginning of that program.

NUMBER keys

SKIP

STOP

PAUSE

DIRECT

NAVIGATOR/

TOP MENU

▲▼◄►

SUB MENU

AUDIO

CHAPTER

SLOW/SEARCH

PLAY/×1.3

ENTER

FRAME

RETURN

CM SKIP

TIME SLIP

DVD-RRAM

e.g., 5: [0] → [5] 15: [1] → [5]

DVD-A VCD CDDVD-R DVD-VRAM MP3

DVD-RRAM

ERASE

Various Playback

PLAY/×1.3

Ι◄◄ /►►Ι

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Starting from a selected item

e.g., 5: [0] → [5]

15: [1] → [5]

MP3

e.g., 5: [0] → [0] → [5]

15: [0] → [1] → [5]

115: [1] → [1] → [5]

Notes:

• This may not work with some discs.

• This works only when stopped (screen saver is displayed on the television)

with some discs.

•

DVD-A

- A group number can be specified while the screen saver is displayed.

e.g., 5: [5]

- Playing bonus groups

Some discs contain bonus groups. If a password screen appears after

selecting a group, enter the password with the NUMBER keys and press

ENTER. Refer also to the disc’s jacket.

Quick View

Notes:

• Output is in PCM when using a digital connection. (p. 18)

• This is cancelled when you perform skip, pause, or when play reaches a

point where a program recorded in sound other than Dolby Digital starts.

• This does not work if the setting is “Off” in “Search Audio & PLAY ×1.3”.

(p. 69)

• This does not work when recording is in XP or FR mode during

simultaneous recording and play. (p. 42).

 To return to normal speed

Press PLAY/×1.3.

Slow-motion playback

1 Press ►► FF/SLOW or ◄◄ REW/SLOW while

paused.

• On the unit, hold down ►►Ι or Ι◄◄ .

• When slow motion play is continued for about 5 minutes it pauses

automatically.

Notes:

• The speed increases up to 5 steps.

• Press PLAY to restart play.

•

VCD

Backward slow-motion (◄◄ ) does not work.

 To return to normal speed

Press PLAY/×1.3.

Frame-by-frame viewing

1 Press FRAME ΙΙ► or FRAME ◄ΙΙ while paused.

 To return to normal speed

Press PLAY/×1.3.

Notes:

• Each press shows the next frame.

• Press PLAY to restart play.

•

VCD

Backward frame-by-frame (◄ΙΙ) does not work.

• Whether pictures are advanced by “Frame” or “Field” is selected

automatically. (pp. 68, 70)

Displaying the television image as a

picture-in-picture

1 Press TIME SLIP during play.

• The unit displays the television image as a picture-in-picture.

• You will hear the playback audio.

• Press TIME SLIP again to cancel.

• Time Slip becomes unavailable if any V-Chip setting is made in the

LOCK item of the SET UP.

PLAY

0 min

CH8

Play images

Current receiving images

• You can change the channel being

received by pressing CH ▲▼.

• You cannot change the channel being

received while recording.

Starting play from a selected title, chapter or track.

 To show the play images in full

Press TIME SLIP.

Skipping the specified time (Time Slip)

1 Press TIME SLIP during play.

2 Press ▲▼ to select the time while the indication is

displayed.

• The time indicator will go off after about 5 seconds, but will turn on

again when you set the indicator.

• Press ▲▼ to alter in one-minute units. Press and hold ▲▼ to alter

in 10-minute units.

3 Press ENTER.

• Play skips the specified time.

PLAY

0 min

DVD-A VCD CDDVD-R DVD-VRAM MP3

1 Press NUMBER keys to select the item during play

or while stopped.

DVD-A

VCD

DVD-R

DVD-V

RAM

(Motion picture parts only)

DVD-A

VCD

DVD-R

DVD-V

RAM

(Motion picture parts only)

RAM

(Only with Dolby Digital)

The play speed can be increased without distorting the audio.

1 Press and hold PLAY/×1.3 during play.

DVD-RRAM

Note:

•

DVD-R

Time Slip is not possible during recording.

Disc / Card Operation

G 8

T 14

TOTAL

111

0 9

No.

TREE

G 7/25

MP3 music

001 My favorite

001 Brazilian pops

002 Chinese pops

003 Czech pops

004 Hungarian pops

005 Liner notes

006 Japanese pops

007 Mexican pops

008 Philippine pops

009 Swedish pops

001 Momoko

002 Standard number

001 Piano solo

002 Vocal

TOTAL TRACK

TREE

G 1

T 1

TOTAL

111

0 9

No.

No. GROUP

Prev. Next

001 Both Ends Freezing

002 Lady Starfish

003 Life on Jupiter

004 Metal Glue

005 Paint It Yellow

006 Pyjamamama

007 Shrimps from Mars

008 Starperson

009 Velvet Cuppermine

010 Ziggy Starfish

1 : My favorite

This unit can play MP3 files recorded on CD-R/RW with a

computer. Files are treated as tracks and folders are treated as

groups.

2 Press ▲▼ to select the track and press ENTER.

• Play continues to the last track in the last group.

• “

” indicates the track currently playing.

• You can also select the track with the NUMBER keys.

e.g., 5: [0] → [0] → [5]

15: [0] → [1] → [5]

115: [1] → [1] → [5]

Selected group

 To show other pages

Press ▲▼◄► to select “Prev.” or “Next” and press ENTER.

• After listing all the tracks in one group, the list for the next

group appears.

 To exit the screen

Press RETURN or TOP MENU.

2 Press ► to display the tree screen while the file list

is displayed. Press ▲▼◄► to select a group and

press ENTER.

• The file list for the group appears.

Notes:

• Reading or play of the disc may take time if there are a lot of still pictures

or sessions.

• The display order may differ from how the order is displayed on a

computer.

• A folder which has no MP3 files is indicated in black. You cannot select

groups with no MP3 files.

You cannot select groups that contain

no compatible files.

Selected group no. /Total group no.

If the group has no track, “– –” is displayed as

group number.

• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by

the unit or the disc.

Using menus to play MP3

1 Press TOP MENU during stop or play.

G: Group no.

T: Track no. in the group

TOTAL: Track no./Total track no. in all groups

002 group

001

001track.mp3

002track.mp3

003track.mp3

003 group

001track.mp3

002track.mp3

003track.mp3

001track.mp3

002track.mp3

003track.mp3

004track.mp3

(file = track

)

Root

Order of Play

(folder = group)

Naming folders and files

At the time of recording, give

folder and file names a 3-digit

numeric prefix in the order

you want them to play (this

may not work at times).

• For other notes concerning the MP3, see page 11.

001track.mp3

(Or .MP3)

Extension

Note:

• Press ◄► to jump layers in the tree screen.

MP3

Using the tree screen to find a group

Using the tree screen to find a track

To erase a program that is being

played back

Since the program, and play lists (p. 57) created from it are

erased irretrievably by this procedure, you should be certain

you wish to erase before carrying it out.

1 Press ERASE during play.

• A confirmation screen will be displayed.

Notes:

•

RAM

It is not possible to erase the program when you are carrying out

simultaneous recording and play. (p. 42)

•

DVD-R

The amount of space remaining on the disc does not increase

even if you erase programs.

• If the confirmation screen disappears before you complete the operation,

start from the beginning again.

• It is not possible to erase a title that is in the process of being recorded.

2 Press ◄► to select “Erase” and press ENTER.

Erase

Erase Cancel

Time remaining after erase 2:40(EP)

Corresponding play list chapters will be erased.

You can erase titles while playing.

DVD-RRAM

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Create chapters

1 Press CHAPTER during play.

• “CHAPTER” lights on the Front Display for a few seconds.

• Press SKIP ►►Ι or SKIP Ι◄◄ to skip to the start of a chapter.

• You cannot activate this function when recording and playing at the

same time.

Notes:

• You can play and edit the created chapters. (pp. 51~53, 57~59)

• For other notes concerning the chapter, see page 51.

e.g., DVD-RAM “LR”

is selected

e.g.,

DVD-V

English is selected language.

PLAY

DVD-RAM

Soundtrack

1 ENG Digital 3/2.1ch

LR L R

While playing DVD-RAM or Video CD

•

RAM

If it is a recording of an SAP broadcast, each time you press

AUDIO:

MAIN ↔ SAP

Notes:

• The audio cannot be changed while Time Slip is used.

•

RAM

You may be unable to change the audio when you have connected

the unit to an AV receiver through the DIGITAL AUDIO OUT terminal and

“Dolby Digital” is set to “Bitstream”. If this occurs:

- Change “Dolby Digital” to “PCM” or “Bitstream”. (p. 69)

- Connect also with an audio cable (pp. 18~19) and change the input on

the receiver.

You can change the audio channel number each time you press

the button. This allows you to change things like the soundtrack

language.

RAM

While playing DVD-Audio or DVD-Video

Changing audio during play

1 Press AUDIO.

• How the type changes depends on when you press the button.

You can change the audio being received or played.

DVD-A VCDDVD-VRAM

Disc / Card Operation

 Front view

Common procedures

1 Press PLAY SETUP in play mode.

 To clear the on-screen menus

Press RETURN.

Disc menu

Disc

Play

Sound track

Subtitle

OFF

Audio channel

Digital 2/0 ch

Menu Item Setting

2 Press ▲▼ to select the menu and press ►.

3 Press ▲▼ to select the item and press ►.

4 Press ▲▼ to select the setting.

Notes:

• The screens depend on the disc contents.

• Depending on the disc contents, there are some items that you cannot

select or change.

Disc

Play

Sound track

Subtitle

OFF

Audio channel

Digital 2/0 ch

e.g., DVD-RAM

Not available when playing CDs and MP3 discs.

Sound track

Sound track language

DVD-A

DVD-V

See

below.

Audio attribute

RAM

DVD-R

DVD-A

DVD-V

See

on next page.

Karaoke vocal, on and off

DVD-V

Solo:

Duet:

Subtitle

Subtitle language

DVD-A

DVD-V

See

below.

• Changing the subtitle language is only possible with discs on which

two or more subtitle languages are recorded.

• Any change must be made from the menu recorded on the disc.

(Not available on all discs.)

Subtitle on/off

RAM

DVD-R

DVD-A

DVD-V

Turn the Subtitle ON or OFF.

Angle

Angle number

DVD-A

DVD-V

• Changing the angle is only possible with discs on which two or

more angles are recorded.

• Any change must be made from the menu recorded on the disc.

(Not available on all discs.)

STILL-P

Page

Still picture number

DVD-A

• When “Return” is displayed:

Select “Return” and press ENTER to return to the

default page.

• When “RANDOM” is displayed:

Select “RANDOM” and press ENTER, the picture

changes randomly each time you press ENTER.

Slide

Show

Plays according to the default order on the disc.

DVD-A

Audio channel

RAM

VCD

Select the audio channel. (p. 48)

PBC

Playback control on/off

VCD

Indicates whether menu play (playback control) is on or off.

Sound track/subtitle language

ENG: English SVE: Swedish CHI: Chinese

FRA: French NOR: Norwegian KOR: Korean

DEU: German DAN: Danish MAL: Malay

ITA: Italian POR: Portuguese VIE: Vietnamese

ESP: Spanish RUS: Russian THA: Thai

NLD: Dutch JPN: Japanese *: Others (pp. 67~69)

▲▼◄►

RETURN

PLAY SETUP

Using On-screen Menus

DVD-A VCDDVD-R DVD-VRAM

OFF

V1+V2

OFF

V1 V2

(Continued on next page.)

e.g., DVD-RAM

NUMBER keys

ENTER

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Sound track/subtitle language

Notes:

• When playing back recordings of SAP broadcasts, “1+1 ch” will be

displayed.

• You can only select subtitles, soundtracks, and angles if they are recorded

on the disc.

• Some discs allow changes to soundtracks, subtitles, and angles only by

using the disc’s menus.

• If the subtitles overlap closed captions recorded on discs, turn the subtitles

off.

LPCM/PPCM/ Digital/DTS/MPEG: Signal type

k (kHz): Sampling frequency

b (bit): Number of bits

ch (channel): Number of channels

e.g., 3/2 .1ch

.1: Subwoofer signal (not displayed if there is no

subwoofer signal)

No surround

Mono surround

Stereo surround (left/right)

Center

Front left + Front right

Front left + Front right + Center

Play menu

Disc

Play

Repeat play

OFF

e.g., DVD-RAM

Repeat play

Each time you press ▲▼:

•

RAM

DVD-V

DVD-R

Title

Chapter OFF

•

VCD

Track

All OFF

•

DVD-A

MP3

Track

Group OFF

• While playing a play list:

RAM

PL (Play list)

OFF

Select “OFF” to cancel.

Notes:

• You cannot use repeat play to repeat an entire DVD-Audio, DVD-Video,

MP3 discs or all the play lists on a DVD-RAM.

• Repeat play does not work if the disc’s elapsed play time is not shown on

the unit’s display.

• ERASE does not work while in repeat play mode.

 If the Video CD has playback control

1. While stopped (the screen saver is on the television), press

the NUMBER keys to select a track. (p. 46)

2. Select the repeat mode.

DVD-A VCD CDDVD-R DVD-VRAM MP3

Disc / Card Operation

 Top view

Play

SUB MENU

07 08

- -

- - - - - -

10 10/27 Mon 8 10/27 Mon

Previous Next

Select

DIRECT NAVIGATOR Title View

DVD-RAM

02/02

VIDEO PICTURE

 Title/Chapter

Programs are recorded as a single title consisting of one

chapter.

Title

Chapter

Start End

RAM

You can divide a title into multiple chapters. (See

“Create Chapter” on page 48, “Divide Chapter” on page 53.)

Chapter Chapter Chapter Chapter

Title

RAM

You can change the order of chapters and create a

play list.

•

DVD-R

Titles are divided into about 5-minute chapters after

finalizing. (p. 62)

The maximum number of items on a disc:

• Titles: 99

• Chapters: Approximately 1 000 (Depends on disc contents.)

Notes:

• Once erased or partially erased, it cannot be restored to its original state.

Make certain before proceeding.

• You cannot edit during recording.

Editing titles/chapters and playing

chapters

1 Press DIRECT NAVIGATOR.

•

RAM

Press ▲▼◄► to select “VIDEO”. If you play still pictures,

press ▲▼◄► to select “PICTURE”. (p. 54)

2 Press ▲▼◄► to select the title.

• You can also select a title by entering a 2-digit number with the

numeric buttons.

3 Press SUB MENU, then ▲▼ to select the operation

and press ENTER.

• If you select “Edit”, press ▲▼ to select the operation and press

ENTER.

 To show other pages

Press ▲▼◄► to select “Previous” or “Next” and press ENTER.

• You can also press SKIP ►►Ι or SKIP Ι◄◄ to show other

pages.

 Multiple editing

Select with ▲▼◄► and press (PAUSE). (Repeat.)

A check mark appears. Press (PAUSE) again to cancel.

Refer to “Title

operations”.

 If you select “Chapter View”.

Preparation

• Release protection before proceeding:

- Cartridge (p. 9)

RAM

- Disc (p. 60)

RAM

•

RAM

When the title is protected (p. 52), you can only access

“Properties” and “Cancel Protection”. Release the protection to access

other items.

Enter Name

Set up Protection

Cancel Protection

Shorten

Change Thumbnail

Divide Title

Erase

Properties

Edit

Chapter View

SKIP

PLAY/×1.3

ENTER

RETURN

▲▼◄►

SUB MENU

PAUSE

DIRECT

NAVIGATOR

DVD-RRAM

DIRECT NAVIGATOR Chapter View

DVD-RAM

VIDEO PICTURE

Play

SUB MENU Select

Previous Next

- - - - - - - -- - - -- - - -

- - - - - - - -- - - -

01/01

0001

08 8 10/27 Mon

4 Press ▲▼◄► to select the chapter.

• You can also select a chapter by entering a 3-digit number with the

numeric buttons.

 To start play

Press ENTER.

 To edit

Go to Step 5 on next page.

• To show other pages/Multiple editing (see above)

(Continued on next page.)

e.g., 5: [0] → [5]

15: [1] → [5]

e.g., 5: [0] → [0] → [5]

15: [0] → [1] → [5]

115: [1] → [1] → [5]

• If you enter a number larger

than the total number of

chapters, the last chapter is

selected.

• If you enter a number larger

than the total number of titles,

the last title is selected.

Editing the Recorded Programs (Using the Direct Navigator)

PLAY/×1.3

Ι◄◄ /►►Ι

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Erase Chapter

Divide Chapter

Combine Chapters

Title View

5 Press SUB MENU, then ▲▼ to select the operation

and press ENTER.

You can go back to the Title View.

 To exit the screen

Press DIRECT NAVIGATOR.

 To return to the previous screen

Press RETURN.

Refer to “Chapter

operations”.

Title operations

DIRECT NAVIGATOR Shorten

DVD-RAM

VIDEO PICTURE

End

- - : - - . - -

Start

- - : - - . - -

Start

End

Exit

0:43.21

Shorten

Dinosaur

Erase Cancel

Time remaining after erase 1:33(EP)

Corresponding play list chapters will be erased.

Erase

The title is irretrievably erased when you use this procedure and

cannot be retrieved. Check the title carefully before erasing to

ensure it isn’t one you want to keep.

2 Press ◄► to select “Erase” and press ENTER.

Notes:

• The disc’s available recording time may not increase after erasing short

titles.

• The available recording time on DVD-R does not increase when you erase

titles.

07 08

- -

- - - - - -

10 10/27 Mon 8 10/27 Mon

Previous Next

DIRECT NAVIGATOR Title View

DVD-RAM

02/02

VIDEO PICTURE

Erase

Dinosaur

Erase Cancel

Time remaining after erase 2:40(EP)

Corresponding play list chapters will be erased.

Properties

DVD-RRAM

Information (e.g., recording time) is shown.

DVD-RRAM

(Multiple editing is possible. (p. 51))

07 08

- -

- - - - - -

10 10/27 Mon 8 10/27 Mon

Previous Next

DIRECT NAVIGATOR Title View

DVD-RAM

02/02

VIDEO PICTURE

Dinosaur

Properties

No. 01

Date 6/23/2004 Wed

CH 4

Start 10:00 AM

Rec time 2:15(SP)

Note:

• The full name is shown in the “Properties” screen, but if you enter a long

name, only part of it is shown in the title list.

Edit → Enter Name

DVD-RRAM

Refer to “Entering text” on page 63.

Edit → Set up Protection/Cancel Protection

RAM

(Multiple editing is possible. (p. 51))

If set, this will protect the title from accidental erasure.

2 Press ◄► to select “Yes” and press ENTER.

• The lock symbol “ ” appears when the title is protected.

07 08

- -

- - - - - -

10 10/27 Mon 8 10/27 Mon

Previous Next

DIRECT NAVIGATOR Title View

DVD-RAM

02/02

VIDEO PICTURE

Set up Protection

Yes No

Set title protection.

07 08

- - - -

10 10/27 Mon 8 10/27 Mon

DIRECT NAVIGATOR Title View

DVD-RAM

Note:

• Titles will be erased even if they are protected if you format the disc with

DISC SETTING. (p. 61)

Edit → Shorten

RAM

2 Press ENTER at the start point and end point of the

section you want to erase.

• See “For quicker editing” on page 53.

3 Press ▲▼ to select “Exit” and press ENTER.

• Select “Next” and press ENTER to erase other

sections.

You can remove unnecessary parts of the recording such as

commercials.

• The program segment, and play list scenes created from it, are erased

irretrievably when you use this procedure. Check carefully before

proceeding.

DIRECT NAVIGATOR Shorten

DVD-RAM

VIDEO PICTURE

PLAY08

End

- - : - - . - -

Start

- - : - - . - -

Start

End

Exit

0:43.21

4 Press ▲◄ to select “Erase” and press ENTER.

 To erase another part of the same title

After storing the point in “Start” and “End”, select “Next” in Step 2

and perform Step 4, then repeat Steps 2~4.

Notes:

• You may not be able to specify start and end points within 3 seconds of

each other.

• You cannot specify start and end points if the picture recorded is stilled.

• The unit pauses when the title reaches its end during this procedure.

• The disc’s available recording time may not increase after erasing short

parts of titles.

1 Do Steps 1~3 on page 51.

Disc / Card Operation

For quicker editing

• Use search (p. 45), Time Slip (p. 46) or slow-motion (p. 46) to find the

desired point.

• Press SKIP ►►Ι or SKIP ׀◄◄ to skip to the end of a title.

Chapter operations

DIRECT NAVIGATOR Chapter View

DVD-RAM

VIDEO PICTURE

Previous Next

- - - - - - - -- - - -- - - -

- - - - - - - -- - - -

01/01

0001

08 8 10/27 Mon

Erase Chapter

Erase Cancel

Corresponding play list chapters will be erased.

DIRECT NAVIGATOR Divide Chapter

DVD-RAM

VIDEO PICTURE

08 PLAY

Divide

Exit

0:00.01

DIRECT NAVIGATOR Chapter View

DVD-RAM

VIDEO PICTURE

Previous Next

- - - - - - - -- - - -- - - -

- - - - - - - -- - - -

01/01

0001

08 8 10/27 Mon

Combine Chapters

Combine Cancel

Selected Chapter Following Chapter

Combine chapters.

001 002

• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by

the unit or the disc.

Edit → Change Thumbnail

DVD-RRAM

You can change an image to be shown as a thumbnail picture in

the Title View.

2 Press PLAY/×1.3 to start play.

3 Press ENTER when the image you want to use as a

thumbnail is shown.

• See “For quicker editing” below.

• To change to another point in the same title:

Select “Change” with ▲▼ and press PLAY/×1.3, and then repeat

Steps 3~4.

4 Press ▲▼ to select “Exit” and press ENTER.

• The displayed scene is changed at this point.

DIRECT NAVIGATOR Change Thumbnail

DVD-RAM

VIDEO PICTURE

Change

00:00.01

Change

Exit

0:00.01

Edit → Divide Title

RAM

You can divide a selected title into two. You must make sure when

dividing a title because it cannot be recovered after the procedure.

3 Press ▲▼ to select “Exit” and press ENTER.

2 Press ENTER at the point you want to divide the

title.

• See “For quicker editing” below.

• To confirm the division point:

Press ▲▼ to select “Preview” and press ENTER. (Play will begin

from a point 10 seconds prior to and after the division point.)

• To change the division point:

Press ▲▼ to select “Divide” and press ENTER at the point you want

to change.

DIRECT NAVIGATOR Divide Title

DVD-RAM

VIDEO PICTURE

08 PLAY

Divide

- - : - - . - -

Preview

Divide

Exit

0:00.01

Notes:

• The divided titles retain the name of the original title. They also retain the

CPRM property (p. 70) of the original.

• Use search and slow-motion to find the points.

• It is not possible to carry out “Divide” in the following cases:

- When the resulting part(s) are extremely short.

- When the total number of titles is more than 99.

DIRECT NAVIGATOR Divide Title

DVD-RAM

VIDEO PICTURE

Divide

- - : - - . - -

Preview

Divide

Exit

0:00.01

Divide Title

Dinosaur

Divide Cancel

Once divided, this title cannot be

recombined.

4 Press ◄► to select “Divide” and press ENTER.

• The title is divided at the point.

1 Do Steps 1~5 on pages 51~52.

2 Press ◄► to select “Erase” and press ENTER.

• Even if you erase the chapter, the original title is not erased.

Erase Chapter

RAM

(Multiple editing is possible. (p. 51))

RAM

Divide Chapter

3 Press ▲▼ to select “Exit” and press ENTER.

• A little portion of the recording directly preceding the division point

may be lost.

2 Press ENTER at the point you want to divide.

• See “For quicker editing” below.

• Repeat this step to divide at other points.

Notes:

• The divided chapters retain the name of the original title. They also retain

the CPRM property (p. 70) of the original.

• It is not possible to carry out “Divide”, when the resulting part(s) are

extremely short.

RAM

Combine Chapters

2 Press ◄► to select “Combine” and press ENTER.

• The selected chapter and next chapter are combined.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 Front view

DIRECT NAVIGATOR Select Folder

PICTURE

SUB MENU Select

SD CARD

Previous Next

01/01

Picture 0022 File 0023

DCIM

100

PANA

001 100

PANA

002 101

PANA

003 102

PANA

- - -

0002

- - - - - - - -- - - -- - - -

001/001

Folder 100_PANA

Previous Next

00030001 0004

0006 0007 00080005

DIRECT NAVIGATOR Picture(JPEG) View

PICTURE

SD CARD

Editing and Playing Still Pictures (Using the Direct Navigator)

Playing still pictures on the Card or

DVD-RAM

4 Press ▲▼◄► to select the still picture and press

ENTER.

• You can also select titles with the NUMBER keys.

 To stop playing

Press STOP.

 To exit the screen

Press DIRECT NAVIGATOR.

1 Insert a DVD-RAM or Card. (p. 34)

2 Press SD or DVD to select the drive.

3 Press DIRECT NAVIGATOR.

•

RAM

Press ▲▼◄► to select “PICTURE” tab and press ENTER.

e.g., Card

5 Press ▲▼◄► to select “Folder” then press ENTER.

6 Press ▲▼ to select the folder, and press ENTER.

• You can also select titles with the NUMBER keys.

0002

- - - - - - - -- - - -- - - -

001/001

Folder 100_PANA

Previous Next

00030001 0004

0006 0007 00080005

DIRECT NAVIGATOR Picture(JPEG) View

Play

SUB MENU Select

PICTURE

SD CARD

RAM SD

Play

SUB MENU

07 08

- -

- - - - - -

10 10/27 Mon 8 10/27 Mon

Previous Next

Select

DIRECT NAVIGATOR Title View

DVD-RAM

02/02

VIDEO PICTURE

0002

- - - - - - - -- - - -- - - -

001/001

Folder 100_PANA

Previous Next

00030001 0004

0006 0007 00080005

DIRECT NAVIGATOR Picture(JPEG) View

Play

SUB MENU Select

DVD-RAM

VIDEO PICTURE

e.g., DVD-RAM

e.g., 5: [0] → [0] → [0] → [5]

15: [0] → [0] → [1] → [5]

115: [0] → [1] → [1] → [5]

1115: [1] → [1] → [1] → [5]

• Press ◄► to display the previous or next picture.

• Useful functions during still picture play. (p. 55)

To select the sill pictures in another

folder

• If there is a multiple number of higher folders recognizable, you can switch

them using ◄►.

e.g., 5: [0] → [0] → [5]

15: [0] → [1] → [5]

115: [1] → [1] → [5]

To display information about the Still

Pictures

1 Press DISPLAY twice while in still picture display.

• If “SD Card” or “DVD-RAM” is displayed at the upper right, press

DISPLAY once.

6/10 1:03 PM Folder-Picture No.100-0841

Date 12/25/2004

No. 10/ 22

Folder number

File number

 To exit the picture properties screen

Press DISPLAY.

Shooting data

Note:

• Still pictures cannot be played during recording.

NUMBER keys

SKIP

STOP

DIRECT

NAVIGATOR

▲▼◄►

SUB MENU

ERASE

DISPLAY

RETURN

ENTER

DVD

Disc Tray SD Card Slot

PAUSE

Disc / Card Operation

Useful functions during still picture

play

RAM SD

1 Press ▲▼◄► to select a picture in the DIRECT

NAVIGATOR screen and press ENTER.

• The selected picture is displayed in full screen.

2 Press SUB MENU.

Rotate

3 Press ▲▼ to select “Rotate RIGHT” or “Rotate

LEFT,” and press ENTER.

• Rotate RIGHT:

Picture is rotated 90° clockwise.

• Rotate LEFT:

Picture is rotated 90° counterclockwise.

Note:

• Rotation information will not be stored.

Rotate RIGHT

Rotate LEFT

e.g., When you select

“Rotate RIGHT”

Zoom in/Zoom out

(Only for a still picture with a low pixel count)

1 Press ▲▼◄► to select a picture in the DIRECT

NAVIGATOR screen and press ENTER.

• The selected picture is displayed in full screen.

2 Press SUB MENU.

Rotate RIGHT

Rotate LEFT

Zoom in

1 Press ERASE during play.

2 Press ◄► to select “Erase” and press ENTER.

(p. 56)

• Once erased, the recorded contents are lost and cannot be restored.

Make certain before proceeding.

Erase

Editing Still Pictures

Preparation

• Release protection before proceeding:

- Cartridge (p. 9)

RAM

- Disc (p. 60)

RAM

- Write Protect (p. 11)

• When the picture is protected (p. 56), you can only access “Properties”

and “Cancel Protection”. Release the protection to access other items.

1 Press SD or DVD to select the drive.

2 Press DIRECT NAVIGATOR.

•

RAM

Press ▲▼◄► to select “PICTURE” tab and press ENTER.

RAM SD

3 Press ▲▼◄► to select the picture.

• The selected picture is marked with a frame.

e.g., Card

 To show other pages

Press ▲▼◄► to select “Previous” or “Next” and press ENTER.

• You can also press SKIP ►►Ι or SKIP Ι◄◄ to show other

pages.

 Multiple editing

Select with ▲▼◄► and press (PAUSE). (Repeat.)

A check mark appears. Press (PAUSE) again to cancel.

 To select the still pictures in another folder

See page 54.

4 Press SUB MENU, then ▲▼ to select the operation

and press ENTER.

0002

- - - - - - - -- - - -- - - -

001/001

Folder 100_PANA

Previous Next

00030001 0004

0006 0007 00080005

DIRECT NAVIGATOR Picture(JPEG) View

Play

SUB MENU Select

PICTURE

SD CARD

Erase Picture

Set up Protection

Cancel Protection

DPOF

Start Slide Show

Slide Interval

Refer to “Picture and

folder operations” on

next page.

 To exit the screen

Press DIRECT NAVIGATOR.

 To return the previous screen

Press RETURN.

3 Press ▲▼ to select “Zoom in” and press ENTER.

• To return the picture to its original size, press ▲▼ to select “Zoom

out” in step 3 and press ENTER.

• When zooming in, the picture may be cut off.

• The enlargement information will not be stored.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

DIRECT NAVIGATOR Picture(JPEG) View

PICTURE

SD CARD

0002

- - - - - - - -- - - -- - - -

001/001

Folder 100_PANA

Previous Next

00030001 0004

0006 0007 00080005

Set up Protection

Yes No

Set up protection to the picture(JPEG).

0002

Folder 100_PANA

0001

00060005

DIRECT NAVIGATOR Picture(JP

SD CARD

DIRECT NAVIGATOR Picture(JPEG) View

PICTURE

SD CARD

0002

- - - - - - - -- - - -- - - -

001/001

Folder 100_PANA

Previous Next

00030001 0004

0006 0007 00080005

DPOF

Press ENTER to comfirm.

Set up DPOF on the picture(JPEG).

The contents set with other units will be erased.

Number of prints 1

DIRECT NAVIGATOR Picture(JP

SD CARD

0002

Folder 100_PANA

0001

00060005

Erase Picture/Erase Whole Folder

You can delete still pictures (JPEG) from a Card or DVD-RAM.

2 Press ◄► to select “Erase” and press ENTER.

DIRECT NAVIGATOR Picture(JPEG) View

PICTURE

SD CARD

0002

- - - - - - - -- - - -- - - -

001/001

Folder 100_PANA

Previous Next

00030001 0004

0006 0007 00080005

Erase Picture

Erase Cancel

Erase the picture(JPEG)?

Notes:

• The locked picture cannot be erased.

• Once erased, the recorded contents are lost and cannot be restored. Make

certain before proceeding.

• When erasing a folder, even the files not containing still pictures will also

be erased if they are inside the folder. (This does not apply to folders

under the folder concerned.)

RAM SD

(Multiple editing is possible. (p. 55))

Set up Protection/Cancel Protection

RAM SD

(Multiple editing is possible. (p. 55))

2 Press ◄► to select “Yes” and press ENTER.

• The lock symbol “ ”appears when the still picture is protected.

If set, this will protect the still picture from accidental erasure.

DPOF

(Multiple editing is possible. (p. 55))

You can select a whole folder or individual pictures for printing and

specify the number of prints to be made. “DPOF” means Digital

Print Order Format.

2 Press ◄► to select number of print (0 to 9) and

press ENTER.

• “ ” mark is displayed.

• This appears on the still pictures inside a folder when you make the

DPOF setting for the folder.

Start Slide Show/Slide Interval

RAM SD

 To change the display timing

Press ▲▼ to select “Slide Interval” and press ENTER.

Press ◄► to select the desired timing (0–30 seconds) and

press ENTER.

• To cancel Slide Show, press STOP.

You can display still pictures one by one with constant interval.

Picture and folder operations

1 Do Steps 1~4 on page 55 to edit still picture or do

Steps 1~4 above to edit folder.

 To cancel the print setting

Set the number of print to “0”.

Notes:

• When this is set by this unit, any settings established by other units will be

released.

• Print settings (DPOF) made using this unit may not be viewable on other

equipment.

• Settings cannot be made for folders and files not in accordance with DCF

standards or if there is no remaining space on the card.

0002

- - - - - - - -- - - -- - - -

001/001

Folder 100_PANA

Previous Next

00030001 0004

0006 0007 00080005

DIRECT NAVIGATOR Picture(JPEG) View

Play

SUB MENU Select

PICTURE

SD CARD

Editing still pictures folders

3 Press ▲▼ to select the Folder.

• To show other pages/Multiple editing. (p. 55)

4 Press SUB MENU, then press ▲▼ to select the

operation and press ENTER.

• To select another higher folder. (p. 54)

Erase Whole Folder

Folder Name

Set Protection

Cancel Protection

DPOF

1 Do Steps 1~2 (see “Editing Still Pictures”) on page

55.

2 Press ▲▼◄► to select “Folder” and press ENTER.

 To exit the screen

Press DIRECT NAVIGATOR.

 To return the previous screen

Press RETURN.

Note:

• Even if the protection setting is used by this unit to protect a folder, the

folder may be erased by another unit.

Refer to “Picture and

folder operations”

below.

Folder Name

RAM SD

You can give names to still picture folders.

• Refer to “Entering text” on page 63.

• Folder names inputted using this unit may not be displayed on other

equipment.

Disc / Card Operation

 Top view

PLAY LIST Create

DVD-RAM

SUB MENU Press RETURN to exit.

08 8 10/27 Mon

Source Title 01/01

001/001

Chapters in PLAY LIST

- - - - - -

- -

- - -

- -

- - -

0201

Source Chapter

001 002

- - -

003

001/001

- - - -

- - - - - -

- -

Create

Previous Next

PLAY LIST Play List View

DVD-RAM

01/01

You can create a play list by gathering your favorite chapters

(p. 51) from your recordings. You can also edit the created play

list.

• Editing play lists doesn’t modify the recording data.

• Play lists are not recorded separately so this doesn’t use much capacity.

The maximum number of items on a disc:

• Play lists: 99

• Chapters in play lists: Approximately 1 000 (Depends on disc contents.)

2 Press ENTER.

3 Press ▲▼◄► to select “PLAY LIST” and press

ENTER.

4 Press ▲▼◄► to select “Create” and press ENTER.

Creating play lists

ADJ. SET UP FUNC.

DVD/SD

PAGE

RETURN

(Continued on next page.)

Preparation

• Release protection before proceeding:

- Cartridge (p. 9)

- Disc (p. 60)

• Press DVD to select the DVD drive.

DVD

Play back

Record

Dubbing

/ Edit

Set up

DISC PROTECTION OFF

CARTRIDGE PROTECTION OFF

DVD-RAM

DIRECT NAVIGATOR

TIMER RECORDING

DUBBING

PLAY LIST

SETUP

FLEXIBLE RECORDING

DISC SETTING

SKIP

STOP

ENTER

RETURN

▲▼◄►

SUB MENU

ERASE

PAUSE

RAM

5 Press ◄► to select the source title and press ▼.

 When you want to select all chapters in the title:

• Press ◄► to select the source title and press ENTER, then

skip to Step 7.

• Repeat Steps 5~7 to add other titles or chapters.

PLAY LIST Create

DVD-RAM

SUB MENU Press RETURN to exit.

08 8 10/27 Mon

Source Title 01/01

001/001

Chapters in PLAY LIST

- - - - - -

- -

- - -

- -

- - -

0201

001/001Source Chapter

001 002

- - -

003

6 Press ◄► to select the chapter you want to add to a

play list and press ENTER.

• Press ▲ to cancel.

1 Press MENU in Stop mode, then press ◄► to select

“FUNC.”

• You can also create a new chapter from the source title. Press

SUB MENU to select “Divide Chapter” and press ENTER. (Refer to

“Divide Chapter” on page 53.)

Title

Chapter Chapter Chapter

Chapter Chapter

Play list

Title

NUMBER keys

Using Play List

STOP

Ι◄◄ /►►Ι

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Play

SUB MENU Select

PLAY LIST Play List View

DVD-RAM

- -

- - - - - -

- -

Create

Previous Next

01/01

10/27 Mon 0:30

PLAY LIST Create

DVD-RAM

Press RETURN to exit.

08 8 10/27 Mon

Source Title 01/01

001/001

Chapters in PLAY LIST

- - - - - -

- -

- - -

- -

- - -

0201

001/001Source Chapter

001 002

- - -

003

 To stop partway through

Press RETURN.

 To clear the play list screen

Press RETURN.

5 Press SUB MENU, then ▲▼ to select the operation

and press ENTER.

• If you select “Edit”, press ▲▼ to select the operation and press

ENTER.

Refer to

“Play list

operations”.

7 Press ◄► to select the position to insert the

chapter and press ENTER.

• Repeat steps 6~7 to add other chapters.

• Press ▲ to select other source titles.

8 Press RETURN.

Create

Copy

Enter Name

Change Thumbnail

Erase

Properties

Edit

Chapter View

1 Press MENU in Stop mode, then press ◄► to select

“FUNC.”

2 Press ENTER.

3 Press ▲▼◄► to select “PLAY LIST” and press

ENTER.

4 Press ▲▼◄► to select the play list and press

ENTER.

• You can also select a play list from the play list view by entering a

2-digit number with the numeric buttons.

ADJ. SET UP FUNC.

DVD/SD

PAGE

RETURN

DVD

Play back

Record

Dubbing

/ Edit

Set up

DISC PROTECTION OFF

CARTRIDGE PROTECTION OFF

DVD-RAM

DIRECT NAVIGATOR

TIMER RECORDING

DUBBING

PLAY LIST

SETUP

FLEXIBLE RECORDING

DISC SETTING

Preparation:

• Create play lists first. (p. 57)

DVD-RAM

Play

SUB MENU Select

PLAY LIST Chapter View

Previous Next

- - - - - -- - -- - -

- - -- - -

01/01

001

08 10/27 Mon 0:30

002

 If you select “Chapter View”

6 Press ▲▼◄► to select the chapter.

• You can also select a chapter by entering a 3-digit number with the

numeric buttons.

Note:

• You may not be able to specify start and end points if the material is still

pictures recorded on other equipment.

Playing play lists

e.g., 5: [0] → [5]

15: [1] → [5]

• Whenever a number greater than the total number of play lists is

entered, “Create” is selected.

 To show other pages

Press ▲▼◄► to select “Previous” or “Next” and press ENTER.

• You can also press SKIP ►►Ι or SKIP Ι◄◄ to show other

pages.

 To stop play list play

Press STOP. (The play list appears.)

 To erase a play list during play (p. 59)

Press ERASE.

Press ◄► to select “Erase” and press ENTER.

Using play list to edit play list/chapters

• You can use fast-forward, rewind, pause, and slow-motion while playing

chapters just as you can during normal play.

 Multiple editing

Select with ▲▼◄► and press (PAUSE). (Repeat.)

A check mark appears. Press (PAUSE) again to cancel.

 To play a chapter

Press ENTER.

 To stop chapter play

Press STOP. (The chapter view appears.)

 To erase a chapter

Press ERASE.

Press ◄► to select “Erase” and press ENTER.

• To show other pages/Multiple editing (see above)

• If you enter a number larger

than the total number of

chapters, the last chapter is

selected.

e.g., 5: [0] → [0] → [5]

15: [0] → [1] → [5]

115: [1] → [1] → [5]

Disc / Card Operation

PLAY LIST Play List View

DVD-RAM

- -

- - - - - -

- -

Create

Previous Next

01/01

10/27 Mon 0:30

Erase

Erase Cancel

Erase Play List?

DVD-RAM

PLAY LIST Move Chapter

Previous Next

- - - - - -- - -- - -

- - -- - -

01/01

001

08 10/27 Mon 0:30

002

 To exit the screen

Press RETURN.

 To return to the previous screen

Press RETURN.

Chapter operations

7 Press SUB MENU, then ▲▼ to select the operation

and press ENTER.

Refer to “Chapter

operations”.

You can go back to PLAY LIST View.

Add Chapter

Move Chapter

Divide Chapter

Combine Chapters

Erase Chapter

Play List View

Play list operations

PLAY LIST Play List View

DVD-RAM

- -

- - - - - -

- -

Create

Previous Next

01/01

10/27 Mon 0:30

Dinosaur

Properties

No. 01

Chapters 001

Date 6/23/2004 Wed

Time 2:26.40

PLAY LIST Play List View

DVD-RAM

- -

- - - - - -

- -

Create

Previous Next

01/01

10/27 Mon 0:30

Copy

Copy Cancel

Copy this Play List?

• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by

the unit or the disc.

1 Do Steps 1~5 on page 58.

RAM

(Multiple editing is possible. (p. 58))

Erase

2 Press ◄► to select “Erase” and press ENTER.

• The play list is erased.

• Once a play list has been erased, it is irretrievable. Check carefully

before proceeding.

Properties

Play list information (e.g., time and date) is shown.

RAM

Edit → Create

Refer to “Creating play lists” on pages 57~58.

2 Press ◄► to select “Copy” and press ENTER.

Edit → Copy

RAM

(Multiple editing is possible. (p. 58))

RAM

Edit → Enter Name

Refer to “Entering text” on page 63.

RAM

Note:

• The full name is shown in the “Properties” screen, but if you enter a long

name, only part of it is shown in the play list screen.

Edit → Change Thumbnail

Refer to “Change Thumbnail” on page 53.

RAM

Add Chapter

Refer to “Creating Play lists”, Step 5~8 on pages 57~58.

1 Do Steps 1~7 on pages 58~59.

RAM

2 Press ▲▼◄► to select the position to insert the

chapter and press ENTER.

• The chapter is moved and inserted before the highlighted chapter.

Move Chapter

RAM

Divide Chapter

Combine Chapters

Erase Chapter

RAM

(Multiple editing is possible. (p. 58))

Refer to “Divide Chapter“ on page 53.

Refer to “Combine Chapters“ on page 53.

Refer to “Erase Chapter“ on page 53.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 Top view

DVD

Play back

DISC PROTECTION

RTRIDGE PROTE

DOCUMENTARY

DVD-RAM

DIRECT NAVIGATOR

DVD

Play back

Record

Dubbing

/ Edit

Set up

DISC PROTECTION OFF

CARTRIDGE PROTECTION OFF

DVD-RAM

DIRECT NAVIGATOR

TIMER RECORDING

DUBBING

PLAY LIST

SETUP

FLEXIBLE RECORDING

DISC SETTING

Preparation

• Press SD or DVD to select the drive.

• Release protection before proceeding:

- Cartridge (p. 9)

RAM

- Disc (p. 60)

RAM

- Write Protect (p. 11)

4 Press ▲▼ to select the operation and press ENTER.

• After this operation, follow the desired operation.

Disc Name

1 Press MENU in Stop mode, then press ◄► to select

“FUNC.”

2 Press ENTER.

3 Press ▲▼◄► to select “DISC SETTING” or “CARD

SETTING” and press ENTER.

ADJ. SET UP FUNC.

DVD/SD

PAGE

RETURN

e.g., DVD-RAM

1 Press ▲▼ to select “Disc Name” and press ENTER

in Step 4 above.

2 Refer to “Entering text” on page 63.

• The disc name is displayed in the DVD Functions window.

e.g., DVD-RAM

DVD

ENTER

RETURN

▲▼◄►

DISC SETTING

Disc Name

Disc Protection

Erase all titles

Format disc

Titles 11

Used 0:22

Free 5:38(EP)

DVD-RAM

DISC SETTING

Disc Name

Disc Protection

Erase all titles

Format disc

Titles 11

Used 0:22

Free 5:38(EP)

DVD-RAM

Disc Protection

This allows you to protect discs from accidental erasure.

The lock symbol “ ”appears closed when

the disc is write-protected.

1 Press ▲▼ to select “Disc Protection” and press

ENTER in Step 4 above.

2 Press ◄► to select “Yes” and press ENTER.

Erase all titles

• All titles and play lists created from them will be erased irretrievably when

you use this procedure. Check carefully before proceeding.

1 Press ▲▼ to select “Erase all titles” and press

ENTER in Step 4 above.

DISC SETTING

Disc Name

Disc Protection

Erase all titles

Format disc

Titles 11

Used 0:22

Free 5:38(EP)

DVD-RAM

Disc Protection

Yes No

Set up Disc Protection.

DVD-RRAM SD

 To stop partway

Press RETURN.

DVD-RRAM

RAM

Disc Setting / Card Setting

DVD/SD

Disc / Card Operation

3 Press ◄► to select “Start” and press ENTER.

• All titles and play lists are erased.

Notes:

• Computer data and still pictures (JPEG, TIFF) cannot be erased.

• Erase does not work if one or more programs are protected.

Format Disc/Format Card

(Refer to “Formatting” on page 70.).

Notes:

• Formatting erases all contents on the disc, including computer data. Check

carefully before proceeding.

• Some DVD-RAM are unformatted. Format them before using them in this

unit. Formatting also allows you to erase the entire contents of a disc.

 To stop formatting

Press RETURN.

(You can cancel formatting if it takes more than 2 minutes. The

disc or card must be reformatted if you do this.)

1 Press ▲▼ to select “Format disc” or “Format ”and

press ENTER in Step 4 on page 60.

2 Press ◄► to select “Yes” and press ENTER.

3 Press ◄► to select “Start” and press ENTER.

• A message appears when formatting is finished.

4 Press ENTER.

e.g., DVD-RAM

Notes:

• Do not turn the unit off or disconnect the AC power supply cord while

the message “Formatting the disc” is on the TV. This can render

the disc unusable. (This can take up to max. 70 minutes (DVD-RAM).

If it takes more than 2 minutes, you can cancel formatting by pressing

RETURN. The disc must be reformatted if you do this.)

• All data on the disc or card is erased when it is formatted, including

recordings made with this unit. Data written to the disc or card by a

computer is also erased.

• When a disc or card has been formatted using this unit, it may not be

possible to use it on any other equipment.

• The disc cannot be formatted if the write protect tab (p. 9) is switched to

“PROTECT”. Release the protection to continue.

• The SD Card cannot be formatted if the write protection (p. 11) is switched

to “LOCK”. Release the protection to continue.

• The message “Unable to format” appears when trying to format discs this

unit cannot use.

• DVD-R and CD-R/RW cannot be formatted.

DISC SETTING

Disc Name

Disc Protection

Erase all titles

Format disc

Titles 11

Used 0:22

Free 5:38(EP)

DVD-RAM

Erase all titles

Yes No

All titles and play lists will be erased.

Are you sure you want to continue?

DISC SETTING

Disc Name

Disc Protection

Erase all titles

Format disc

Titles 11

Used 0:22

Free 5:38(EP)

DVD-RAM

Erase all titles

Start Cancel

All titles and play lists will be

completely erased.

Are you sure you want to continue?

DISC SETTING

Disc Name

Disc Protection

Erase all titles

Format disc

Titles 11

Used 0:22

Free 5:38(EP)

DVD-RAM

Format disc

Yes No

Formatting the disc will erase all contents.

This will take approximately 1 minute.

Are you sure you want to continue?

DISC SETTING

Disc Name

Disc Protection

Erase all titles

Format disc

Titles 11

Used 0:22

Free 5:38(EP)

DVD-RAM

Format disc

Start Cancel

All contents of this disc will be

completely erased.

Do you want to continue?

2 Press ◄► to select “Yes” and press ENTER.

RAM SD

e.g., DVD-RAM

Select First play

Select whether to show the top menu after finalizing the disc. Do

this before finalizing the disc.

1 Press ▲▼ to select “Select First play” and press

ENTER in Step 4 on page 60.

2 Press ▲▼ to select “Top Menu” or “Title 1” and

press ENTER.

Top Menu: The top menu appears first.

Title 1: The disc content is played without displaying the top

menu.

DISC SETTING

Disc Name

Disc Protection

Erase all titles

Format disc

Titles 11

Used 0:22

Free 5:38(EP)

DVD-R

Select First play

Top Menu

Title 1

DVD-R

(Continued on next page.)

• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by

the unit or the disc.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

(Refer to “Finalize” on page 70.)

Finalize

You can play DVD-R on compatible DVD players by finalizing

them on this unit, effectively making them into DVD-Video that

complies with DVD-Video standards.

1 Press ▲▼ to select “Finalize” and press ENTER in

Step 4 on page 60.

2 Press ◄► to select “Yes” and press ENTER.

Before finalizing After finalizing

Disc display on this unit DVD-R DVD-V

Recording/Editing/ Entering

name

○ ×

Play on other players

× ○

DVD-R finalized on this unit may not be playable on other players due to

the condition of the recording.

3 Press ◄► to select “Start” and press ENTER.

• Finalizing starts.

• A message appears when finalizing is finished.

Notes:

• Do not disconnect the AC power supply cord while the message

“Finalizing the disc” is on the television. This will render the disc

unusable.

• Finalizing takes up to 15 minutes.

• You can only finalize DVD-R that were recorded on this unit.

• You cannot record on DVD-R that have been finalized.

• After finalizing

- The disc becomes play-only and you can no longer record or edit it.

- DVD-R finalized on this unit may not be playable on other players due to

the condition of the recording.

- There is a pause of several seconds between titles.

- Titles are divided into about 5-minute* chapters.

* This time varies greatly depending on the condition and mode of recording.

• Visit Panasonic’s homepage for more information about DVDs.

http://www.panasonic.com/playDVD-R

4 Press ENTER.

DISC SETTING

Disc Name

Disc Protection

Erase all titles

Format disc

Titles 11

Used 0:22

Free 5:38(EP)

DVD-R

Finalize

Yes No

This will take approximately ×× minutes.

Do you want to continue?

DISC SETTING

Disc Name

Disc Protection

Erase all titles

Format disc

Titles 11

Used 0:22

Free 5:38(EP)

DVD-R

Finalize

Start Cancel

You will be unable to record on this disc

one it is finalized.

Are you sure you want to continue?

DVD-R

(DVD-R recorded on this unit only)

Disc / Card Operation

 Top view

0 --

Enter Name

ERASE

SET

[

{

;

–

]

(

}

)

SPACE

RAM

Characters

Title 64 (44*)

Play list 64

Disc 64

Folder Name (Still pictures) 36

* Title name for timer recording

The maximum number of characters:

DVD-R

Characters

Title 44

Disc 40

• If a name is long, parts of it may not be shown in some screens.

1 Show Enter Name screen.

 To end partway

Press RETURN.

• Text is not saved.

Name field:

Shows the text you have entered

2 Press ▲▼◄► to select a character and press

ENTER.

 To erase a character

Press ▲▼◄► to select the character in the name field and

press PAUSE.

• You can also erase characters by selecting “ERASE” and

pressing ENTER.

 Using the NUMBER keys to enter characters

e.g., entering the letter “R”

a. Press 7 to move to the 7th row.

b. Press 7 twice to highlight “R”.

c. Press ENTER.

 To enter a space

Press CANCEL and press ENTER.

3 Press STOP.

• You can also finish entering the title by selecting “SET” and pressing

ENTER.

• Returns to the previously displayed screen.

This feature allows you to enter a name/title Page

Title 52

Title (timer recording) 40~41

Play list 59

Disc 60

Folder (Still pictures) 56

Characters

Folder Name (Still pictures) 36

• Repeat this step to enter other characters.

Notes:

• The full title is shown in the Properties screen (pp. 52, 59), but if you enter

a long title, only part of it is shown in the program list or play list screen.

•

DVD-R

If you enter a long title, only part of it is shown in the menu screen

after finalization.

• Still picture folder titles:

• Titles are saved in the “TITLE.DVD” folder and can only be displayed on

this unit.

• Input is not possible if the destination lacks sufficient space or has

exceeded the maximum number of allowable files.

• The title may not appear correctly if input was done using other equipment.

You can give names to recorded titles, etc.

NUMBER keys

CANCEL

STOP (SET)

▲▼◄►

PAUSE (ERASE)

ENTER

RETURN

7 7

Preparation

• Press SD or DVD to select the drive.

• Release protection before proceeding:

- Cartridge (p. 9)

RAM

- Disc (p. 60)

RAM

- Write Protect (p. 11)

DVD-RRAM SD

DVD/SD

Entering Text

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 Top view

You can copy the recorded still pictures on the Card to the

DVD-RAM.

You can copy the recorded still pictures on the DVD-RAM to the

Card.

1 Press MENU in Stop mode, then press ◄► to select

“FUNC.”

2 Press ENTER.

3 Press ▲▼◄► to select “DUBBING” and press

ENTER.

ADJ. SET UP FUNC.

DVD/SD

PAGE

RETURN

e.g., Card

4 Press ▲▼ to select “Dubbing direction” and press

►.

• If you are not going to change the registered list press ▼ several

times. (See step 7.)

 To select Source

Press ▲▼ to select “Source” and press ENTER. Press ▲▼ to

select the drive and press ENTER.

DVD

Play back

Record

Dubbing

/ Edit

Set up

WRITE PROTECTION OFF

SD CARD

DIRECT NAVIGATOR

TIMER RECORDING

DUBBING

SETUP

COPY ALL PICTURES

CARD SETTING

t 0

ncel all

dubbing

irection

igh speed

Source SD card

Destination DVD

Press ENTER to change the setting.

Set the dubbing direction.

Create List 0

Cancel all

Start dubbing

Dubbing direction

SD card DVD

Mode

Picture High speed

Source SD card

Destination DVD

Set the dubbing direction.

Dubbing

ist 0

ancel all

rt dubbing

direction

High speed

Set the dubbing direction.

DVD

SD card

 To select Destination

Press ▲▼ to select “Destination” and press ENTER. Press ▲▼

to select the drive and press ENTER.

• The same drive as the transfer (dubbing) source can be

selected.

ist 0

ancel all

rt dubbing

direction

High speed

Source SD card

Destination DVD

Press ENTER to change the setting.

Set the dubbing direction.

t 0

ncel all

t dubbing

irection

High speed

Set the dubbing direction.

DVD

SD card

Preparation

• Press SD or DVD to select the drive.

• Release protection before proceeding:

- Cartridge (p. 9)

RAM

- Disc (p. 60)

RAM

- Write Protect (p. 11)

RAM SD

 To confirm

Press ◄.

 To cancel all registered transferring (dubbing)

setting and lists

Press ▲▼ to select “Cancel All” and press ENTER. Press ◄►

to select “Yes” and press ENTER.

• The settings and lists may be cancelled in the following

situations.

– When a still picture or folder has been recorded or erased at

the transfer (dubbing) source

– When steps have been taken, for instance, to turn off the

unit, remove the card, open the tray, change the transfer

(dubbing) direction, etc.

SKIP

▲▼◄►

SUB MENU

RETURN

ENTER

DVD

PAUSE

Transferring (Dubbing) Still Pictures

DVD/SD

Ι◄◄ /►►Ι

Disc / Card Operation

5 Press ▲▼ to select “Create list” and press ►.

• Select the transferring (dubbing) items and register on the list.

Create List 0

Cancel all

Start dubbing

SET

01/01

Dubbing direction

SD card DVD

Mode

Picture High speed

Picture/Folder Picture

Space on destination 797MB

No. Capacity Name

Previous Next

Create a dubbing list.

Dubbing

New entry

Create List

Cancel all

Start dubbing

SET

01/01

Dubbing direction

SD card DVD

Mode

Picture High speed

Picture/Folder Picture

Space on destination 797MB

No. Capacity Name

Previous Next

Create a dubbing list.

Dubbing

New entry

 To register individual still pictures

Press ▲▼ to select “New entry” and press ENTER. Press

▲▼◄► to select the still picture and press ENTER.

• To select a multiple number of items together, press PAUSE

to add the check mark and press ENTER. (Refer to “Multiple

editing” on page 66.)

• To show other pages (p. 66)

• To select the still pictures in another folder (see right)

• To edit the transferring (dubbing) list (see right)

 To register on a folder by folder basis

a. Press ▲▼ to select “Picture/Folder” and press ENTER.

Create List 0

Cancel all

Dubbing direction

SD card DVD

Mode

Picture High speed

Picture/Folder Picture

Space on destination 797MB

No. Capacity Name

Create a dubbing list.

Dubbing

New entry

b. Press ▲▼ to select “Folder” and press ENTER.

c. Press ▲▼ to select “New item” and press ENTER.

d. Press ▲▼ to select the folder and press ENTER.

• To select a multiple number of items together, press PAUSE

to add the check mark and press ENTER. (Refer to “Multiple

editing” on page 66.)

• To show other pages (p. 66)

• To switch another higher folder (see right)

• To edit the transferring (dubbing) list (see right)

Still pictures and folders cannot be registered on the same list.

6 Press ▲▼ to select “Set” and press ENTER.

• The transferring (dubbing) list is registered.

 To select another folder

a. Press ▲▼◄► to select “Folder” and press ENTER.

b. Press ▲▼ to select the folder and press ENTER.

0002

Folder 100_PANA

00030001 0004

0006 0007 00080005

DIRECT NAVIGATOR Picture(JPEG) View

PICTURE

SD CARD

DIRECT NAVIGATOR Select Folder

SD CARD

DCIM

100

PANA

001 100

PANA

002 101

PANA

003 102

PANA

- - -

DIRECT NAVIGATOR Select Folder

PICTURE

SD CARD

DCIM

100

PANA

001 100

PANA

002 101

PANA

003 102

PANA

• The still pictures of different folders cannot be registered on the

same list.

• If there is a multiple number of higher folders recognizable, you

can switch them using ◄►. (Folders whose higher folders are

different cannot be registered on the same list.)

 To edit the transferring (dubbing) list

Select the item.

Press SUB MENU.

Press ▲▼ to select the operation and press ENTER.

• Multiple editing is possible. (p. 66)

Create List

Cancel all

Start dubbing

SET

01/01

Dubbing direction

SD card DVD

Mode

Picture High speed

Picture/Folder Picture

Space on destination 797MB

No. Capacity Name

Previous Next

Create a dubbing list.

Dubbing

100-0832

100-0833

New entry

Erase all

Add

Erase

Erase all:

All currently registering folders are erased.

Add:

A folder is added in the desired location (before the

selected folder).

Erase :

The selected folder is erased.

(Continued on next page.)

7 Press ▲▼ to select “Start dubbing” and press

ENTER.

Create List 2

Cancel all

Start dubbing

Dubbing direction

SD card DVD

Mode

Picture High speed

Press ENTER.

Start dubbing.

Dubbing

• For individual still pictures only

When specifying another folder as the transferring (dubbing)

destination, select “Folder”. Press ◄► to select “Yes” and press

ENTER to start transferring (dubbing).

Create List 2

Cancel all

Dubbing direction

SD card DVD

Mode

Picture High speed

Press ENTER.

Start dubbing.

Dubbing

Folder New folder

Do you want to create a new folder and copy to it?

0002

Folder 100_PANA

Create list Select pictures

SD CARD

00030001

0006 00070005

• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by

the unit or the disc.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

You can copy the whole contents of the Card to DVD-RAM.

(Maximum of 300 folders, 3 000 files)

Copy All Pictures

DVD

Play back

Record

Dubbing

/ Edit

Set up

WRITE PROTECTION OFF

SD CARD

DIRECT NAVIGATOR

TIMER RECORDING

DUBBING

SETUP

COPY ALL PICTURES

CARD SETTING

ADJ. SET UP FUNC.

DVD/SD

PAGE

RETURN

1 Press SD to select SD drive.

2 Press MENU in Stop mode, then press ◄► to select

“FUNC.”

3 Press ENTER.

4 Press ▲▼◄► to select “COPY ALL PICTURES” and

press ENTER.

Copy All Pictures(JPEG)

Copy Cancel

Copy from SD card

DCIM

Copy to DVD

JPEG

DCIM001

Copy all pictures(JPEG) in the card.

 Only if there are multiple selectable folders on

the Card

5 Press ▲▼ to select “Copy from” and press ◄► to

select the dubbing source folder.

Press ▲▼ to select “Copy to” and press ◄► to

select the dubbing target folder.

Copy All Pictures(JPEG)

Copy Cancel

Copy from SD card

DCIM

Copy to DVD

JPEG

DCIM001

Copy all pictures(JPEG) in the card.

6 Press ▲▼◄► to select “Copy” and press ENTER.

• All still pictures are copied. Follow the on-screen instructions.

 To stop transferring (dubbing)

Press and hold RETURN for 3 seconds.

 To return to the previous screen

Press RETURN.

 To continue copying all pictures when copying is

completed

Press RETURN.

 To finish copying all pictures when dubbing is

completed

Press ENTER.

Preparation

• Press SD or DVD to select the drive.

• Release protection before proceeding:

- Cartridge (p. 9)

RAM

- Disc (p. 60)

RAM

- Write Protect (p. 11)

RAMSD

Notes:

• When transferring (dubbing) the still pictures on a folder by folder or card

by card basis, files other than the still picture files inside the folder will

also be transferred (dubbed). (This does not apply to the lower folders

contained inside the folders.)

• If still pictures are already contained inside the transfer (dubbing)

destination folder, the new still pictures are recorded following the existing

still pictures.

• If the space on the destination drive runs out or the number of files/folders

to be transferred (dubbed) exceeds the maximum (p. 11), transferring

(dubbing) will stop partway through.

• When a name has been input by this unit for the transfer (dubbing)

source folder, the folder name will be reflected in the transfer (dubbing)

destination folder.

• Print number setting (DPOF) is not transferred (dubbed).

• The sequence in which the still pictures are registered on the transfer

(dubbing) list may not be reflected at the transfer (dubbing) destination.

 To stop transferring (dubbing)

Press and hold RETURN for 3 seconds.

 To return to the previous screen

Press RETURN.

To show other pages

Press ▲▼◄► to select “Previous” or “Next” and press ENTER.

• You can also press SKIP ►►Ι or SKIP Ι◄◄ to show other pages.

Multiple editing

Select with ▲▼◄► and press

(PAUSE). (Repeat.)

• A check mark appears. Press (PAUSE) again to cancel.

Disc / Card Operation

 Front view

ADJ. SET UP FUNC.

DVD/SD

PAGE

RETURN

1 Press MENU in Stop mode, then press ◄► to select

“FUNC.”

2 Press ENTER.

3 Press ▲▼◄► to select “SETUP” and press ENTER.

• You can also press DVD SETUP to enter the setup mode.

If necessary, refer to “Summary of settings” on next page.

DVD

Play back

Record

Dubbing

/ Edit

Set up

DISC PROTECTION OFF

CARTRIDGE PROTECTION OFF

DVD-RAM

DIRECT NAVIGATOR

TIMER RECORDING

DUBBING

PLAY LIST

SETUP

FLEXIBLE RECORDING

DISC SETTING

e.g., DVD-RAM

If you change “Recording Time

in EP Mode”.

4 Press ▲▼ to select the Menus tab and press ◄►.

Language

Ratings

Recording Time in EP Mode

Play DVD-Audio in Video Mode

Level 8

EP (8H)

Off

SET UP

Disc

Video

Audio

Menus tab

5 Press ▲▼ to select the Items and press ENTER.

Language

Ratings

Recording Time in EP Mode

Play DVD-Audio in Video Mode

Level 8

EP (8H)

Off

SET UP

Disc

Video

Audio

Items

6 Press ▲▼ to select an Option and press ENTER.

• Some options require different operations. Follow the displayed

instructions.

EP (6H)

EP (8H)

Recording Time in EP Mode

SET UP

Disc

Video

Audio

Options

Procedure

Changing the Unit’s Settings

 To return to the previous screen

Press RETURN. Even if you have changed an option, the

change is not activated until you press ENTER.

 To exit the screen

Press RETURN several times.

Note:

• The settings remain intact even if you switch the unit to standby.

POWER

▲▼◄►

RETURN

ENTER

Disc Tray SD Card Slot

DVD SETUP

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

See page 67 for details on menu operation.

The settings remain intact even if you switch the unit to standby.

Summary of settings

Menus tab Items

Options

(Underlined items are the factory presets.)

Disc Languages

Choose the language for audio, subtitle and disc menus.

DVD-V

Press ENTER to display the menu.

● Enter a code (p. 69) when you select “Other

****

”

● Some discs start in a certain language despite any changes you make

here.

Audio Language

● English ● French ● Spanish

● Original: The original language of each disc will be selected.

● Other

****

Subtitle Language ● Automatic:

If the language selected for “Audio Language” is not available, subtitles of

that language will automatically appear if available on that disc.

● English ● French ● Spanish ● Other

****

Menu Language

● English ● French ● Spanish ● Other

****

Ratings

Set a ratings level to limit DVD-Video play.

Follow the on-screen instructions. Enter a 4-digit password with

the NUMBER keys when the password screen is shown.

● Do not forget your password.

● 8 No Limit: All DVD-Video can be played.

● 1 to 7: Prohibits play of DVD-Video with corresponding ratings

recorded on them.

● 0 Lock All: Prohibits play of all DVD-Video.

Changing ratings (When level 0-7 is selected)

● Unlock Recorder ● Change Password

● Change Level ● Temporary Unlock

Recording time in EP mode

Select the maximum number of hours for recording in EP mode.

(Refer to “Recording modes and approximate recording times”

on page 39.)

● EP (6 H): You can record for 6 hours on an unused 4.7 GB disc.

● EP (8 H): You can record for 8 hours on an unused 4.7 GB disc.

Play DVD-Audio in Video Mode

Select “Video (On)” to play DVD-Video content on some

DVD-Audio.

● Video (On): The setting returns to “Audio (Off)” when you change

the disc or turn the unit off.

● Audio (Off)

Video 3-D Y/C Separation

Allows high quality recording of the received picture.

● On: High quality recording is achieved by precise separation

of the Y (luminance) and C (color) of the received

picture signal.

● Off: Set to OFF to reduce ghost images when recording

pictures with fast motion. Does not work with S-Video

input pictures.

Hybrid VBR Resolution

The picture recorded to a DVD-RAM can be smoothed out.

(Refer to “VBR” on page 70.)

● Automatic: Resolution is adjusted automatically to match the

picture when recording and noise is reduced over the

block.

RAM

● Fixed: Recording is performed with fixed resolution. This

allows smoother recording of fast moving pictures, etc.

Still Mode

Select the type of picture shown when you pause play.

(Refer to “Frames and fields” on page 70.)

● Automatic

● Field: Select if jittering occurs when “Automatic” is selected.

● Frame: Select small text or fine patterns cannot be seen clearly

when “Automatic” is selected.

Seamless Play

Plays chapters in the play list in a continuous playback method.

● Seamless Play does not work with programs recorded in

LPCM or when using Quick View.

● On: Enables smoother playback. (Does not function during

Quick View and when the audio of chapters varies.

Also, playback position may change.)

● Off: Playback can be done with greater precision, but

continuous play may be momentarily halted.

Line-in NR

Reduces video tape noise while dubbing.

● When noise reduction is on, “3-D Y/C Separation” (see above)

does not work regardless of the setting.

● Automatic: Noise reduction only works on input picture from a video

tape.

● On: Noise reduction works for any input video.

● Off: Noise reduction is off. Select when you want to record

input as is.

Black Level Control

Select normal, lighter or darker for adjusting the black level control to the desired setting for picture enhancement.

Record level

Adjusts the black level of the signal recorded to a DVD.

● Lighter ● Darker

Playback level

Adjusts the black level of the DVD playback signal.

● Lighter ● Normal ● Darker

Disc / Card Operation

• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by

the unit or the disc.

Menus tab Items

Options

(Underlined items are the factory presets.)

Audio Search Audio & PLAY ×1.3

You may hear sound regardless of this setting with some discs.

● On: Audio is heard during first level search forward.

● Off: Audio is not heard during search. Quick View (p. 46)

does not work.

D.Range Compression

DVD-V

(Dolby Digital only)

Change the dynamic range for late night viewing.

● On: ● Off:

Select MTS

Select whether to record the main or secondary audio type

(SAP) when recording to DVD-R or DVD-RAM. (You cannot

change secondary audio when recording audio to DVD-R or

DVD-RAM from an external source.)

● Main: ● SAP:

Digital Audio Output

Change the settings when you have connected equipment through this unit’s DIGITAL AUDIO OUT terminal. (p. 18)

● Press ENTER to show the menu.

PCM Down Conversion

Select how to output audio with a sampling frequency of

96 kHz or 88.2 kHz.

● Signals are converted to 48 kHz or 44.1 kHz despite the

above settings if the signals have a sampling frequency of

over 96 kHz or 88.2 kHz, or the disc has copy protection.

● On: Signals are converted to 48 kHz or 44.1 kHz. (Choose

when the connected equipment cannot process signals

with a sampling frequency of 96 kHz or 88.2 kHz.)

● Off: Signals are output as 96 kHz or 88.2 kHz. (Choose

when the connected equipment can process signals

with a sampling frequency of 96 kHz or 88.2 kHz.)

Dolby Digital

Select how to output the signal, to output

“Bitstream” so the connected equipment

decodes the signal, or to decode on

this unit and output the signal as “PCM”

(2 channel).

Note:

● Not making the proper settings may result

in noise, possibly damage your hearing

and speakers, and digital recording may

not work properly.

● Bitstream: When connecting to equipment displaying the Dolby

Digital logo.

● PCM: When connecting to equipment not displaying the Dolby

Digital logo.

DTS

● Bitstream: When connecting to equipment displaying the DTS logo.

● PCM: When connecting to equipment not displaying the DTS

logo.

Audio for XP Recording

Choose the audio type when recording with XP mode.

● Sound recordings made using LPCM require more

information than usual. Consequently the picture quality of

LPCM recordings may be less than that of normal XP mode

recordings.

• Dolby Digital

(p. 70)

• LPCM (p. 70)

Language Code List

Abkhazian: 6566 Chinese: 9072 Hausa: 7265 Lithuanian: 7684 Romanian: 8279 Telugu: 8469

Afar: 6565 Corsican: 6779 Hebrew: 7387 Macedonian: 7775 Russian: 8285 Thai: 8472

Afrikaans: 6570 Croatian: 7282 Hindi: 7273 Malagasy: 7771 Samoan: 8377 Tibetan: 6679

Albanian: 8381 Czech: 6783 Hungarian: 7285 Malay: 7783 Sanskrit: 8365 Tigrinya: 8473

Ameharic: 6577 Danish: 6865 Icelandic: 7383 Malayalam: 7776 Scots Gaelic: 7168 Tonga: 8479

Arabic: 6582 Dutch: 7876 Indonesian: 7378 Maltese: 7784 Serbian: 8382 Turkish: 8482

Armenian: 7289 English: 6978 Interlingua: 7365 Maori: 7773 Serbo-Croatian: 8372 Turkmen: 8475

Assamese: 6583 Esperanto: 6979 Irish: 7165 Marathi: 7782 Shona: 8378 Twi: 8487

Aymara: 6588 Estonian: 6984 Italian: 7384 Moldavian: 7779 Sindhi: 8368 Ukrainian: 8575

Azerbaijani: 6590 Faroese: 7079 Japanese: 7465 Mongolian: 7778 Singhalese: 8373 Urdu: 8582

Bashkir: 6665 Fiji: 7074 Javanese: 7487 Nauru: 7865 Slovak: 8375 Uzbek: 8590

Basque: 6985 Finnish: 7073 Kannada: 7578 Nepali: 7869 Slovenian: 8376 Vietnamese: 8673

Bengali;Bangla: 6678 French: 7082 Kashmiri: 7583 Norwegian: 7879 Somali: 8379 Volapük: 8679

Bhutani: 6890 Frisian: 7089 Kazakh: 7575 Oriya: 7982 Spanish: 6983 Welsh: 6789

Bihari: 6672 Galician: 7176 Kirghiz: 7589 Panjabi: 8065 Sundanese: 8385 Wolof: 8779

Breton: 6682 Georgian: 7565 Korean: 7579 Pashto, Pushto: 8083 Swahili: 8387 Xhosa: 8872

Bulgarian: 6671 German: 6869 Kurdish: 7585 Persian: 7065 Swedish: 8386 Yiddish: 7473

Burmese: 7789 Greek: 6976 Laothian: 7679 Polish: 8076 Tagalog: 8476 Yoruba: 8979

Byelorussian: 6669 Greenlandic: 7576 Latin: 7665 Portuguese: 8084 Tajik: 8471 Zulu: 9085

Cambodian: 7577 Guarani: 7178 Latvian, Lettish: 7686 Quechua: 8185 Tamil: 8465

Catalan: 6765 Gujarati: 7185 Lingala: 7678

Rhaeto-Romance:

8277 Tatar: 8484

Press NUMBER keys to enter the code.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Bitstream

This is the digital form of multi-channel audio data (e.g., 5.1 channel) before

it is decoded into its various channels.

CPRM (Content Protection for Recordable Media)

CPRM is technology used to protect broadcasts that are allowed to be

recorded only once. Such broadcasts can be recorded only with CPRM

compatible recorders and discs.

Decoder

A decoder restores the coded audio signals on DVDs to normal. This is

called decoding.

Dolby Digital

This is a method of coding digital signals developed by Dolby Laboratories.

Apart from stereo (2-channel) audio, these signals can also be multichannel

audio. A large amount of audio information can be recorded on one disc

using this method.

Dolby Pro Logic

A surround system where a 4-channel audio track is recorded as 2 channels

and then is restored to 4 channels for play. The surround channel is

monaural and can reproduce up to 7 kHz.

Down-mixing

This is the process of remixing the multi-channel audio found on some discs

into two channels for stereo output. It is useful when you want to listen to the

5.1-channel audio recorded on DVDs through your television’s speakers.

Some discs prohibit down-mixing and this unit can then only output the front

two channels.

DPOF (Digital Print Order Format)

DPOF is the standard printing format for still picture data. It is used by

photo developing stores to print out the still picture data taken from a digital

camera and other equipment or when printing from your home printer.

DTS (Digital Theater Systems)

This surround system is used in many movie theaters around the world.

There is good separation between the channels, so realistic sound effects

are possible.

Dynamic range

Dynamic range is the difference between the lowest level of sound that can

be heard above the noise of the equipment and the highest level of sound

before distortion occurs. Dynamic range compression means reducing the

gap between the loudest and softest sounds. This means you can listen at

low volumes but still hear dialog clearly.

Film and video

DVD-Videos are recorded using either film or video. This unit can determine

which type has been used, then uses the most suitable method of

progressive output.

• Film is 24 or 30 frames per second, with motion picture film generally

being 24 frames per second.

• Video is 60 fields per second (two fields making up one frame).

Finalize

A process that makes play of a recorded CD-R, CD-RW or DVD-R etc.

possible on equipment that can play such media. You can finalize DVD-R on

this unit.

You cannot record onto or edit finalized discs.

Formatting

Formatting is the process of making media such as DVD-RAM recordable

on recording equipment. You can format the DVD-RAM on this unit.

Formatting erases irrevocably all recordings on the disc.

Frames and fields

Frames refer to the single images that constitute the video you see on your

television. Each frame consists of two fields.

• A frame still shows two fields, so there may be some blurring, but picture

quality is generally better.

• A field still shows less picture information so it may be rougher, but there is

no blurring.

JPEG (Joint Photographic Experts Group)

This is a system used for compressing/decoding color still pictures. If you

select JPEG as the storage system on digital cameras etc., the data will

be compressed to 1/10–1/100 of its original size. The special quality of this

standard is that there is little deterioration in picture quality in comparison to

the degree of compression.

LPCM (Linear pulse code modulation)

These are uncompressed digital signals. This unit outputs linear PCM sound

in 2 channels from the DIGITAL AUDIO OUT terminal. LPCM sound is

available when recording in XP mode.

MP3 (MPEG Audio Layer 3)

An audio compression method that compresses audio to approximately one

tenth of its size without any considerable loss of audio quality. You can play

MP3 you have recorded onto CD-R and CD-RW.

Playback control (PBC)

If a Video CD has playback control, you can select scenes and information

with menus.

Progressive/Interlace

NTSC, the video signal standard, has 480 interlaced (I) scan lines, whereas

progressive scanning uses twice the number of scan lines. This is called

480P.

Using progressive output, you can enjoy the high-resolution video recorded

on media such as DVD-Video.

Your television must be compatible to enjoy progressive video.

Protection

You can prevent accidental erasure by setting writing protection or erasure

protection.

Sampling frequency

Sampling is the process of converting the heights of sound wave (analog

signal) samples taken at set periods into digits (digital encoding). Sampling

frequency is the number of samples taken per second, so larger numbers

mean more faithful reproduction of the original sound.

Subtitles

When dialogue which appears at the bottom of the screen.

TIFF (Tag Image File Format)

A still picture data standard A common format for storing high quality images

on digital camera’s and other devices.

VBR (Variable bitrate)

This is a method of video recording that adjusts the bit rate according to

video signal.

Glossary

Frame Field Field

Information

These displays will alert you to a missed operation or provide further instructions.

Helpful Hints

Warning and Instruction Displays

OSD CAUTION Page

ERROR HAS OCCURRED

PLEASE PRESS ENTER.

• A serious, but temporary error has occurred and one of the unit's safety devices has activated.

Press ENTER. The unit switches to the standby mode. Press POWER to turn the unit on again.

–

NO DISC

• You haven’t inserted a disc. Correctly insert a disc that this unit can use. 9, 34

• The disc is upside down. If it is a single-sided disc, insert it so the label is facing up. 34

THIS IS

NON-RECORDABLE DISC

• The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R. 9

THIS DISC (CARD) IS NOT

FORMATTED PROPERLY

PLEASE FORMAT THE DISC

IN DISC SETTING TO RECORD

• You inserted an unformatted DVD-RAM or Card. Format the disc or card with this unit. 61

CANNOT FINISH RECORDING

COMPLETELY

• The program was copy-guarded. –

• No space left on the disc.

→ Create space by erasing any unwanted programs.

RAM

→ Use a new disc.

RAM

DVD-R

• Recording was not completed for some other reason. –

CANNOT RECORD

DISC IS FULL

• No space left on the disc.

→ Create space by erasing any unwanted programs.

RAM

→ Use a new disc.

RAM

DVD-R

CANNOT RECORD

MAXIMUM NUMBER OF TITLES

EXCEEDED

• The operation is prohibited by the unit or disc. 44

CANNOT READ

PLEASE CHECK THE DISC

• The disc is dirty. –

CANNOT PLAY • You inserted an incompatible disc (Discs recorded in PAL video etc.). 8

PLEASE CHANGE THE DISC

• There may be a problem with the disc. Press OPEN/CLOSE to remove it and check it for

scratches or dirt. (The unit turns off automatically after you open the tray.)

–

NO SD CARD

NO VALID SD CARD

• The card is not inserted. If this message is displayed with a compatible card already inserted,

turn off the power, remove and then re-insert the card.

• The card format does not match. 11

• The card inserted is not compatible. 11

NO FOLDER • There is no compatible folder in this unit. 11

CANNOT WRITE

• The card is currently protected → Release the write protection. 11

• There is no space remaining. → Erase any unwanted files (still pictures). 55, 56

NO READ

• The disc is dirty or badly scratched.

→ Clean the disc if it is dirty.

→ The disc cannot be played if it is scratched and this display doesn’t disappear.

• The unit cannot read the disc. –

• You have used a DVD-RAM/PD lens cleaner and it has finished. 76

UNSUPPORT • You have inserted a disc the unit cannot play or record on. 8~9

U14

• The unit is hot.

→ The unit switches to standby automatically for safety reasons and you cannot operate it.

Wait for about 30 minutes for the service number to disappear.

→ Select a position with good ventilation when installing the unit.

→ Do not block the cooling fan on the rear of the unit.

–

U99

• The unit fails to operate properly. Press POWER to switch the unit to standby. Now press

POWER again to turn the unit on.

–

SLF CHECK

• There was a power failure or the AC plug was disconnected while the power was on. The unit is

carrying out its recovery process. Wait until the message disappears.

–

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Check the following points once again if you are having trouble with your unit.

PROBLEM CORRECTION Page

Power

No power...

• Insert the AC power supply cord securely into a known active AC outlet. 15

• Set POWER to ON. 12, 13

Operation

Cannot operate the DVD...

• Press DVD when operating DVD. 34

• Some operations may be prohibited by the disc. 36~37

Cannot operate the SD (Card)...

• Press SD when operating card. 34

The unit is on but cannot be operated...

• Recording drive or playback drive have not been selected properly. 34

• Some operations may be prohibited by the disc. 36~37

• The unit is hot (“U14” appears on the display). Wait until “U14” disappears. 71

• One of the unit’s safety devices may have been activated.

Reset the unit as follows:

(1) Press POWER on the main unit to switch to standby. If the unit doesn’t switch to

standby, press and hold POWER on the main unit for about 10 seconds. The unit

is forcibly switched to standby. Alternatively, disconnect the AC power supply cord,

wait 1 minute, then reconnect it.

(2) Press POWER to turn the unit on.

–

Cannot eject a disc...

• The Disc Tray can be locked/unlocked.

[Lock]

1 Turn the unit Power ON.

2 Simultaneously press STOP on the unit and POWER on the Remote Control.

[Unlock]

Repeat above steps to unlock.

–

• If the steps above do not work, there may be a unit malfunction. With unit in OFF

condition, hold down both STOP and CH ▲ buttons on the unit for about 5 seconds.

Remove disc. Contact your retailer.

Remote

Control

The Remote Control doesn’t work...

• The batteries are depleted. Replace them with new ones. 8

• Point the Remote Control at the Remote Control sensor on the main unit.

• Remove obstacles between the Remote Control and main unit. –

Picture

The images from this unit do not appear on

the television...

• Make sure your antenna system (TV or CABLE) is correctly set. 15

Picture flickers...

Picture is not sharp...

• Make sure the antenna location, direction or connection. 15

Spots appear on screen, the screen flickers

...

• The unit may be receiving influence, such as electromagnetic wave interference or

induced electromagnetic wave from geomagnetism or external forces (automobile,

electric train, power lines, neon light, motor, magnetized metal framework of a building,

metal shutters, etc.).

–

The top and bottom parts of the screen are

blank...

• Using picture media wider than 16:9, such as cinema vision size media, etc. may

produce blank portions at the top and bottom of the screen.

–

Using Zoom or Just causes top and bottom

of screen to disappear...

• The screen position may be out of adjustment.

→ Adjust the screen position.

There is a lot of after-image when playing

video...

• Select “MPEG NR” in the OTHER ADJUST menu to “OFF”. 33

Before Requesting Service

Information

PROBLEM CORRECTION Page

Sound

No sound...

Low volume...

Distorted sound...

• Make sure your antenna system (TV or CABLE) is correctly set. 15

• Check the connections. Check the input mode on the amplifier if you have connected

one.

16~20

• Turn SURROUND off if it causes distortion. 31

Cannot hear the desired audio type...

• Press AUDIO to select the desired audio type. 48

• If “D.MIX” does not appear in the display when playing multi-channel DVD-Audio, audio

output will be the front two speakers only.

• You cannot change the DVD-Audio audio type if the software producer has restricted

play in stereo.

–

• Turn off SURROUND in the following cases.

- When using discs that do not have surround sound effects such as Karaoke discs.

- When playing MTS broadcast programs.

Cannot switch audio...

• You have used digital connection. Set “Dolby Digital" to “PCM" or connect to other

equipment using audio cables (analog connection).

18, 69

• It is not possible to switch the audio when the recording mode is XP and “LPCM” has

been selected in the SETUP menu, “Audio for XP Recording”.

→ Select “MAIN” or “SAP” from “Select MTS” in the Audio menu before recording.

• There are discs which audio cannot be changed because of how the disc was created. –

Recording, Timer Recording

Cannot record...

• You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc

the unit can record onto.

• The disc is unformatted. Format the disc.

RAM

• The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with

“DISC SETTING”.

9, 61

• Some programs have limitations on the number of times they can be recorded (CPRM). 38

• The disc is full or nearly full. Erase unneeded titles or use another disc. 55

• You cannot record on finalized DVD-R discs. –

• If you repeatedly insert discs or turn this unit on and off 50 times or more, the recording

or editing of DVD-R may be disabled.

–

• The material you are trying to record is copy-guarded. –

• Timer recording will not be activated when in editing or transfer (dubbing). Timer

recording will begin after the editing/transfer (dubbing) is finished.

–

• You cannot record the COMPONENT and HDMI signals. 16, 17

A part or whole of a recorded title has been

lost...

• If the power shuts down or the plug is disconnected from the household AC outlet while

recording or editing, the program may be lost or the disc may become unusable.

→ We cannot offer any guarantee regarding lost titles or discs. You will have to format

the disc ([RAM]) or use a new disc.

–

Timer recording does not work properly...

VCR Plus+ system does not work properly...

• When connected to cable TV box or satellite receiver, the VCR Plus+ system does not

work.

–

• The timer program is incorrect or different timer program times overlap. Correct the

program.

• The clock is not correct. Set the clock. 23

• Correct the guide channels with “VCR Plus+ CH Setting” in the PROGRAM CHANNEL

menu.

• The same guide channel is set to 2 or more channel positions. Set the guide channel

correctly or delete unnecessary channels.

• Timer recording will not be activated during formatting, transfer (dubbing) and other

such operations which should not be interrupted when they are being carried out.

–

Timer recording does not stop even when

STOP is pressed...

• Press and hold STOP for a few seconds to turn “

” off. Recording stops.

40, 41

The timer program remains even after

recording finishes...

• The timer program remains if set to daily or weekly. 41

Strip-shaped black noise is recorded...

• The device in playback is interfered with by the TV because the device is too close to

the TV. Move the device away from the TV.

–

Cannot record video or sound from the

external device...

• The external device is not correctly connected. 16~20

• The proper external input channel (L1 or L2) is not selected. 43

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

PROBLEM CORRECTION Page

Playback

Play fails to start even when PLAY is

pressed...

Play starts but then stops immediately...

• Insert the disc correctly with the label facing up. 34

• You tried to play a blank DVD-RAM/DVD-R, or discs unplayable on this unit. 8

• When recording to DVD-RAM using EP (8H) mode, play may not be possible on DVD

players that are compatible with DVD-RAM. In this case use EP (6H) mode.

DVD-Video is not played...

• Some DVD-Video cannot be played when you change the ratings level. 68

Picture distorted during search...

• Some distortion is normal. –

Alternative sound track and subtitles cannot

be selected...

• The languages are not recorded on the disc. –

• You may have to use the disc’s own menus to select languages. –

No subtitles...

• When progressive output is on, closed captions cannot be displayed. –

• Subtitles are not recorded on the disc. –

• Turn the Subtitles ON. 49

Angle cannot be changed...

• This function depends on software availability. Even if disc has multiple angles, they

may be recorded for specific scenes only.

–

You have forgotten your ratings password...

• Reset all DVD initial settings to ex-factory condition. 67

Quick View does not work...

• This does not work if the setting is “Off” in “Search Audio & PLAY ×1.3”. 69

• This does not work when audio is other than Dolby Digital. –

• This does not work when recording is in XP or FR mode. –

Play stops for a moment during Quick

View...

• Play may stop where two play lists join, but this is malfunction. –

The resume play function does not work...

• This function only works when “PLAY” is flashing in the unit’s display. 44

• Memorized positions are canceled when the unit is turned off or when the tray is

opened. The memorized position on the play list is also canceled when the play list and

title are edited.

–

Discs recorded on this unit cannot be played

on other equipment...

• Discs recorded on this unit must be finalized in order to play them on other equipment.

Edit

Cannot format...

• You tried formatting a disc that is not compatible with this unit. 8~9

• If disc is dirty, purchase a special disc cleaner (LF-K200DCA1, where available) and

format after disc is cleaned.

10, 76

Cannot create chapters...

Cannot mark the start point or the end point

during “Shorten” operation...

• The unit writes the chapter division information to the disc when you turn it off or

remove the disc. The information is not written if there is an interruption in the power

before this.

–

• These operations are not possible with still pictures. –

• You cannot set points if they are too close to each other. You cannot set an end point

before a start point.

–

Cannot erase chapters...

• When the chapter is too short to erase, use “Combine Chapters” to make the chapter

longer.

The available recording time doesn’t

increase even after erasing recordings on

the disc...

• Available recording space on the DVD-R does not increase even after erasing

previously recorded titles.

–

Cannot create a play list...

• You cannot select all the chapters at once in a title if the title also includes still pictures.

Select them individually.

–

Still pictures

The contents of the card cannot be read...

• The memory card format is not compatible with the unit.

→ Format using FAT 12 or FAT 16 with other equipment or format the memory card

with this unit.

• The unit tried to display still picture files that were in a folder level that is not compatible. 11

• The still picture file is not JPEG or TIFF.

→ This unit displays still pictures (JPEG and TIFF) that are in accordance with DCF

standard.

• Turn off and then turn on the unit again. –

Transferring (dubbing), erasing and setting

protection takes a long time...

• When there are a lot of folders and files, it may sometimes take a few hours. –

• When repeating copying or erasing, it may sometimes take a long time. Format the disc

or memory card.

The tray won’t open/close...

• The tray cannot be opened or closed while the still pictures are played back and editing

screen is being displayed. Press RETURN a few times to clear the screen.

–

Cannot display Direct Navigator screen...

• This screen cannot be displayed during recording or transfer (dubbing) or while the unit

is standing by for linked timer recording with external equipment.

–

Cannot edit or format a card...

• Release the card’s protection setting. (With some cards, the “Write protection Off”

message sometimes appears on the screen even when protection has been set.)

Information

PROBLEM CORRECTION Page

Displays

The display is dim...

• Change “FRONT DISPLAY” in the OTHER ADJUST menu. 33

“12:00” is flashing on the unit’s display...

• Set the clock. 23

The recording time display, the transfer

(dubbing) process display and the displayed

recording time of MP3 are different from the

actual time...

• The time on the unit’s display and the remaining recording time on the screen may be

indicated less or more than the actual value.

–

• In DVD-R, the remaining capacity does not increase even if programs are erased. –

• If you repeat recording or editing 200 times or more, the remaining capacity of the

DVD-R is reduced and then recording or editing may be disabled.

–

• The time during fast forward and rewind, or the process during transfer (dubbing) may

not be displayed accurately.

–

Miscellaneous

TV sometimes makes a cracking sound...

• If there is no problem with picture or audio, this sound is a result of normal cabinet

shrinkage due to changes in room temperature. This will not effect performance, etc.

–

The main unit is hot.

• The main unit radiates heat and some of the parts may become hot. This is not a

problem for performance or quality. Set up at a location with good ventilation. Do not

cover the ventilation holes of the TV with a tablecloth etc., and do not place on top of

other equipment.

–

HDMI

Poor Video...

(Snow noise, no picture, picture runs, etc.)

• HDMI cable is not connected securely. 17

• Turn the power supply of the TV set and connected equipment OFF then turn on. 17

• Check compatibility of input signal from the connected equipment. 17

• The connected equipment must be EIA/CEA-861/861B compliant. 17

Poor Audio...

• Change the audio setting of the connected equipment to L.PCM. –

• Check the setting of HDMI INPUT. 17

• If the problem is due to the digital audio connection, change to the analog audio

connection.

If you cannot resolve the problem, please call the Customer Satisfaction Center for product assistance at 1-800-211-PANA(7262).

To locate an authorized servicenter call toll free 1-800-211-PANA(7262)

or, contact us via the web at:http://www.panasonic.com/contactinfo

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Q & A

Question Answer

I want to enjoy 5.1 Ch surround sound of Dolby

digital, DST, etc. What equipment do I need?

• A This unit alone is not enough. You will need 6 speakers and, if a digital connection, an amp

equipped with Dolby digital or DST recorder. (DVD playback only)

Can I play DVD-Video, DVD-Audio and Video

CDs purchased abroad?

• You can play them if the video standard is NTSC.

• A Only if the regional code includes “ALL” or “1”. Check the package.

Can a DVD-Video that does not have a region

number be played?

• The DVD-Video region number indicates the disc conforms to a standard. You cannot play discs that

do not have a region number.

Can I use DVD-R and DVD-RW in this unit?

• A Only a DVD-R that has been finalized can be used. DVD-RW cannot be used.

• This unit also record and plays 1×-4× recording speed DVD-R discs.

Can I use CD-R and CD-RW in this unit?

• A CD-R and CD-RW recorded with finalized MP3 music will play. However, this unit does not allow

CD-R and CD-RW recording.

Can I record from a video or outside DVD

source?

• A Most video tape and DVD titles on the market are copy protected. In this case, recording is not

possible.

Can I play DVD-Rs recorded on this unit on

other machines?

• A Once a DVD-R recorded on this unit is finalized, it can be played on other DVD-R compatible

machines. (It is not guaranteed to work with all machines.) It may not play depending on recording

conditions.

Can I record digital audio signals on this unit? • This is not possible.

How many times can I rewrite a DVD-RAM? • A This varies based on conditions of usage, but they can be rewritten up to about 100 000 times.

Can I record from a commercially purchased

video cassette or DVD?

• Most commercially sold video cassettes and DVD are copy protected; therefore, recording is usually

not possible.

Can a digital audio signal during DVD playback

be recorded to other equipment?

• You can record if using the PCM signal. When recording DVD, change the “Digital Audio Output”

settings to the following from the SETUP menu.

- PCM Down Conversion: On

- Dolby Digital: PCM

- DTS: PCM

However, only

- As long as digital recording from the disc is permitted.

- As long as the recording equipment is compatible with a sampling frequency of 48 kHz.

You cannot record MP3 signals.

The precision parts in this unit are readily affected by the environment, especially temperature, humidity, and dust. Cigarette

smoke also can cause malfunction or breakdown.

To clean this unit, wipe with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this unit.

• Before using chemically treated cloth, read the instructions for the cloth carefully.

• Use eyeglass cleaner to remove stubborn dirt from the LCD.

Observe the following points to ensure continued listening and viewing pleasure.

Dust and dirt may adhere to the unit’s lenses over time, possibly making it impossible to record or play discs.

Use the recommended DVD-RAM/PD Lens cleaner (LF-K123LCA1) about once every year, depending on frequency of use and the

operating environment.

Read the lens cleaner’s instructions carefully before use.

Maintenance

CAUTION :

If water or other liquid enters the monitor through the display panel surface, a malfunction may occur.

Information

• Designs and specifications are subject to change without notice.

Specifications

Unit

Power Supply 120 V AC, 50/60 Hz

Power Consumption

Power On: 116 W

Power Off: 0.8 W (Unit)

0.9 W (Remote Control)

Broad cast Channels VHF 2 ~ 13, UHF 14 ~ 69

CA BLE Channels

Midband A through I (14 ~ 22)

Superband J through W (23 ~ 36)

Hyperband AA ~ EEE (37 ~ 64)

Lowband A-5 ~ A-1 (95 ~ 99)

Special CABLE channel 5A (01)

Ultraband 65 ~ 94, 100 ~ 125

LCD 22-inch, 16:9 aspect ratio LCD panel

Screen size

(W × H × diagonal)

488 mm × 274 mm × 560 mm

Speaker 8 W (4 W + 4 W)

Connection Terminals

INPUT

VIDEO (RCA PIN Type × 1) × 2:

1.0 Vp-p (75 Ω)

S-VIDEO (MINI DIN 4pin × 1) × 2:

Y: 1 Vp-p (75 Ω)

C: 0.286 Vp-p (75 Ω)

AUDIO L-R (RCA PIN Type × 2) × 2:

0.5 Vrms

COMPONENT VIDEO

INPUT

Y × 1:

1.0 Vp-p (including synchronization)

PB/PR × 1:

±0.35 Vp-p

AUDIO L-R (RCA PIN Type × 2) × 1:

0.5 Vrms

HDMI INPUT

HDMI type A Connector

AUDIO L-R (RCA PIN Type × 2) × 1:

0.5 Vrms

OUTPUT

AUDIO L-R (RCA PIN Type × 2) × 1:

0.5 Vrms

Headphones/Earphones Stereo (M3 plug)

Optical digital output

Optical connector: only for DVD/CD

× 1

Operating Temperature 5 °C ~ 35 °C (41 °F ~ 95 °F)

Operating Humidity 10 % ~ 75 %

Weight 13.3 kg

Dimensions

(W × H × D)

592 mm × 518 mm × 294 mm

DVD

Recording system

DVD video recording standards

(DVD-RAM),

DVD video standards (DVD-R)

Recordable discs

12 cm (5˝) 4.7 GB DVD-RAM discs

12 cm (5˝) 9.4 GB DVD-RAM discs

8 cm (3˝) 2.8 GB DVD-RAM discs

12 cm (5˝) 4.7 GB DVD-R discs (for

General Ver. 2.0)

8 cm (3˝) 1.4 GB DVD-R discs (for

General Ver. 2.0)

Recording time

Max. 8 hours (using 4.7 GB disc)

XP: 60 minutes

SP: 120 minutes

LP: 240 minutes

EP: 480 minutes

Discs played

12 cm (5˝) 4.7 GB DVD-RAM discs

12 cm (5˝) 9.4 GB DVD-RAM discs

8 cm (3˝) 2.8 GB DVD-RAM discs

12 cm (5˝) 4.7 GB DVD-R discs

(for General Ver. 2.0)

8 cm (3˝) 1.4 GB DVD-R discs

(for General Ver. 2.0)

DVD-VIDEO discs

CD-Audio discs (CD-DA)

Video CD discs

DVD-AUDIO discs

CD-R/CD-RW discs (CD-DA, Video

CD, MP3 formatted discs)

SD Card Slot SD Memory Card Slot

Compatible media SD Memory Card, MultiMediaCard

Format FAT12 or FAT16

Image format

JPEG conforming to DCF (Design rule

for Camera File system)

(sub sampling; 4:2:2 or 4:2:0)

TIFF (Uncompressed RGB chunky)

DPOF Compatible

Number of pixels 320 × 240 to 6 144 × 4 096

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF

MATSUSHITA ELECTRIC CORPORATION OF AMERICA

One Panasonic Way Secaucus, New Jersey 07094

PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC

OF PUERTO RICO, INC.,

AVE. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto

Rico 00985

Panasonic/Quasar Video Products

Limited Warranty

Limited Warranty Coverage

If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Sales

Company (collectively referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original

purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product.

The decision to repair or replace will be made by the warrantor.

Product Parts Labor Service Contact Number

Camcorder

One (1) Year (except CCD Image

Sensor)

CCD Image Sensor - 6 (Six) Months

Ninety (90) Days

Carry-In or Mail-In 1-800-211-PANA(7262)

DVD/VCR Deck,

A/V Mixer

One (1) Year Ninety (90) Days Carry-In or Mail-In 1-800-211-PANA(7262)

TV/VCR, TV/DVD,

TV/DVD/VCR Combination

One (1) Year (except CRT)

CRT - Two (2) Years

Ninety (90) Days

Carry-In: 21″ CRT and Smaller

In-Home or Carry-In: 22″ CRT and

Larger

1-800-211-PANA(7262)

LCD TV/DVD-Recorder

Combination

One (1) Year One (1) Year In-Home or Mail-In 1-800-211-PANA(7262)

TV/HDR Combination

One (1) Year (except CRT)

CRT - Two (2) Years

Ninety (90) Days

In-Home or Carry-In 1-888-843-9788

Rechargeable Batteries

(in exchange for defective item)

Ten (10) Days Not Applicable Carry-In or Mail-In 1-800-211-PANA(7262)

Tape, DVD-RAM disc

(in exchange for defective item)

Five (5) Days Not Applicable Carry-In or Mail-In 1-800-211-PANA(7262)

Memory Cards (in exchange for

defective item)

Ninety (90) Days Not Applicable Carry-In or Mail-In 1-800-211-PANA(7262)

During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must carry-in or

mail-in your product or arrange for in-home service, as applicable, during the warranty period.

If non-rechargeable batteries are included, they are not warranted. This warranty only ap plies to products purchased and serviced in the United States or

Puer to Rico. This warranty is extended only to the original purchaser of a new product which was not sold “as is”. A purchase receipt or other proof of the

original purchase date is required for warranty service.

Carry-In, Mail-in or In-Home Service

For Carry-In, Mail-In or In-Home Service (as applicable) in the United States call toll free contact number listed above or visit Panasonic Web Site:

http://www.panasonic.com

For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910.

In-Home service, if applicable, requires clear, complete and easy access to the product by the authorized servicer and does not include removal or re-

installation of an installed product. It is possible that certain in-home repairs will not be completed in-home, but will require that the product, or parts of the

product, be removed for shop diagnosis and/or repair and then re turned.

Limited Warranty Limits And Exclusions

This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage, nor

does it cover markings or retained images on the picture tube or LCD panel resulting from viewing fixed images (including, among other things, letterbox

pictures on standard 4:3 screen TV’s, or non-expanded standard 4:3 pic tures on wide screen TV’s, or onscreen data in a stationary and fixed location).

The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or

failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up ad just ments, misadjustment

of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or

other business), rental use of the product, service by anyone other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to

acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE

FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF

THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to

and from the servicer, loss of media or images, data or other memory or recorded content. The items listed are not exclusive, but are for illustration only.)

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE

LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the

exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during

or after the warranty period, you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the warrantor’s

Consumer Affairs Department at the addresses listed for the warrantor.

PARTS AND SERVICE (INCLUDING COST OF AN IN-HOME SERVICE CALL, WHERE APPLICABLE) WHICH ARE NOT COVERED BY THIS LIMITED

WARRANTY ARE YOUR RESPONSIBILITY.

Limited Warranty

Information

As of October 2003

Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and

Accessories; or make Customer Service and Literature requests by visiting our Web Site at:

http://www.panasonic.com/support

or, contact us via the web at:

http://www.panasonic.com/contactinfo

You may also contact us directly at:

1-800-211-PANA (7262),

Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.

Service in Puerto Rico

Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company

Factory Servicenter:

Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985

Phone (787)750-4300 Fax (787)768-2910

For hearing or speech impaired TTY users, TTY : 1-877-833-8855

Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:

http://www.pasc.panasonic.com

or, send your request by E-mail to:

[email protected]

You may also contact us directly at:

1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday – Friday 9 am to 8 pm, EST.)

Panasonic Services Company

20421 84th Avenue South,

Kent, WA 98032

(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)

Accessory Purchases

For hearing or speech impaired TTY users, TTY : 1-866-605-1277

Customer Services Directory

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Guía rápida de uso en español

Notas sobre las conexiones

• Desconecte la alimentación de todos los componentes antes de

realizar cualquier conexión.

• Si los cables necesarios para conectar un componente al sistema no

están incluidos con el componente o disponibles opcionalmente, quizás

deba adoptar un cable para que se adecue al componente involucrado.

• Consulte cuidadosamente el manual de instrucciones de cada

componente del sistema antes de conectarlo.

 Conexión del cable

Conecte el cable

suministrado por la

compañía de cable local

al terminal VHF/UHF de

la unidad.

Apretar demasiado los cables coaxiales RF “tipo tuerca”

podría dañar los conectores. Asegúrelos solamente con los

dedos.

Conexión del terminal de entrada RF

Nota para el instalador del sistema de CABLE:

Este recordatorio tiene la finalidad de llamar la atención a los

instaladores del sistema de CABLE (televisión por cable) sobre

el artículo 820-40 de NEC que brinda pautas para una conexión

a tierra apropiada y, en particular, especifica que la tierra del

cable se deberá conectar al sistema de tierra del edificio, tan

cerca del punto de ingreso del cable como sea práctico.

Caja de cables

Entrada del

CABLE

Antena

VHF

Antena

UHF

PRECAUCIÓN

Mezclador

 Conexión de la

antena

Conecte el cable de la

antena al terminal VHF/

UHF de la unidad.

Conexión

VIDEO S VIDEO

AUDIO

VIDEO S VIDEO

AUDIO

Conexión del terminal de entrada AV



Conecta videograbadores y otros equipos periféricos

Se usa el terminal Video Se usa el terminal S-Video

COMPONENT VIDEO INPUT

AUDIO

VIDEO

La señal de componente permite una reproducción del color

más precisa porque cada una de las señales Y, P

B y PR se

reciben por separado.

La indicación del terminal de salida de la señal de componente

diferirá según el dispositivo de salida (Y, P

B, PR).

Lea las instrucciones de funcionamiento suministradas con el

dispositivo de salida.

Reproductor DVD

COMPONENT VIDEO

AUDIO

Tipo de

modo

Datos de señal

Exhibición

del menú de

información

Nº de puntos

(H × V)

Frecuencia

horizontal

(kHz)

Frecuencia

vertical (Hz)

Señales de

formato DTV

480i 664 × 485 15.73 29.97 480 i

480p 720 × 483 31.47 59.94 480 p

*720p 1 280 × 720 45.00 60.00 720 p

1 080i 1 920 × 1 080 33.75 30.00 1 080 i

 Señales de componente (Y, PB, PR) que pueden

recibirse

• Las señales de entrada que no sean las que aparecen marcadas con un

asterisco * en la lista, le proporcionarán una imagen estable y hermosa.

Conexión de los terminales de entrada

COMPONENT VIDEO

Conexión HDMI

HDMI

(High Definition Multimedia Interface) es la primera interfaz

A/V de toda la electrónica digital de consumo que soporta el

estándar no comprimido. El terminal HDMI soporta tanto los datos

de vídeo como los de audio.

Puede conectar un dispositivo electrónico de consumo conforme

con la norma EIA / CEA-861 / 861B

, como por ejemplo un Set

Top Box (caja de conexión a Internet) o reproductor de DVD con

terminal de salida HDMI o DVI al terminal de entrada HDMI

Ingrese una fuente de imagen de alta definición con protección

de contenidos digitales de gran ancho de banda (HCDP) a este

terminal HDMI, para poder exhibir en este televisor imágenes de

alta definición en formato digital.

HDMI, el logotipo HDMI y High-Definition Multimedia

Interface son marcas comerciales o marcas comerciales

registradas de HDMI Licensing LLC.

La conformidad de los estándares EIA / CEA-861 /

861B cubre perfiles para la transmisión de video digital

no comprimido, incluyendo la protección de contenidos

digitales de gran ancho de banda.

Information

Configuración inicial (listo para reproducir)

Tras enchufar la unidad en la toma de CA de su casa y presionar

POWER para encender la unidad por primera vez, la unidad

le asistirá para configurar el idioma de pantalla, sintonizará

automáticamente todos los canales que puede recibir y ajustará el

reloj.

La unidad determina automáticamente el tipo de transmisión

(ondas de radio o cable) y sintoniza los canales de la siguiente

manera:

Operaciones preliminares

• Encienda el televisor y seleccione la entrada de vídeo correspondiente

para conformar las conexiones a esta unidad.

• Compruebe que la antena esté conectada correctamente.

1 Presione POWER.

• Para que funcione el botón a distancia POWER, la alimentación

POWER debe estar activada.

• Luego, la unidad procede al ajuste automático del reloj. El

temporizador se visualiza cuando finaliza.

• Si se exhibe “Canal no encontrado...”, presione ENTER de nuevo.

• La opción HL, (horario de ahorro de luz diurna), exhibe la

configuración de la hora de verano.

• HUSO.H exhibe la diferencia horaria respecto a la hora de

Greenwich (GMT).

HHO (Hora estándar del Este) = GMT –5

HHC (Hora estándar central) = GMT –6

HHM (Hora estándar de las Rocosas) = GMT –7

HHP (Hora estándar del Pacífico) = GMT –8

HHA (Hora estándar de Alaska) = GMT –9

HHH (Hora estándar de Hawai) = GMT –10

Para otras zonas: xx hr

5 Presione ENTER.

Banda Canal

Modo TV

(Ondas de radio)

VHF 2-13

UHF 14-69

Modo CATV

(Cable)

VHF 2-13

CATV LOW BAND 95-99

CATV MID/SUPER BAND 14-36

CATV HYPER BAND 37-65

ULTRA BAND

66-94

100-125

SPECIAL CATV CHANNEL 1

English

Espa

ñol

Fran

çais

Select Language

Seleccione la Lengua

élection de Langue

Press ENTER

Pulse ENTER

Appuyer sur ENTER

4 Presione ENTER para iniciar la configuración

automática de canal.

Ajus. automát

En “Ajus. automát”

Canal 35

PARAR

Ajuste automático del reloj

4/4/2004 12:15 AM

HL---------------ACT

HUSO H.------HHO

Ajuste automático del reloj terminado.

Funcionamiento del televisor

El conector de la unidad es un conector HDMI de Tipo A.

AUDIO IN

El conector de la unidad es un conector HDMI de Tipo A.

Set Top Box (caja de conexión a Internet)

 Cuando la entrada de señales de audio es

digital

 Cuando la entrada de señales de audio es

analógica

 Señal de VÍDEO compatible

Este terminal de entrada no está pensado para que se use con

computadoras.

Núm. de puntos (H × V) Frecuencia vertical de barrido (Hz)

1080i 1 920 × 1 080i 59.94 / 60

720p 1 280 × 720p 59.94 / 60

480p

720 × 480p

640 × 480p

59.94 / 60

480i 720 (1 440) × 480i 59.94 / 60

Set Top Box (caja de conexión a Internet)

Ajuste automático canal / reloj

Pulsar la tecla ENTER.

Conectar el cable de antena y si se usa una

caja cable, sintonizarla a su CA local PBS

luego...

3 Presione ENTER.

2 Presione ▲▼ para

seleccionar el idioma del

menú y presione ENTER.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

 Si la unidad no ha podido ajustar el reloj

automáticamente

Fije la hora manualmente.

Cómo agregar y borrar canales

Agregue o borre canales, si no tiene ajustados los necesarios o

tiene fijados canales que no necesite.

1 Presione las teclas NUMBER para seleccionar un

canal.

p. ej. 5: [0] → [5]

15: [1] → [5]

115: [1] → [1] → [5]

• Puede también usar CH ▲▼ cuando vaya a borrar un canal.

2 Presione ADD/DLT.

 Para salir de la pantalla

Presione RETURN.

VCR Plus+ guide channel Settings

Ajuste estos canales de guía de manera que se pueda usar el

sistema VCR Plus+ para la grabación temporizada. Antes de

proceder a los ajustes, prepare el papel que muestra los canales,

los nombres de las estaciones y los canales de guía.

Nombre de la

estación

Canal de

guía

Número del

canal

Ajuste del canal

CBS 04 04 Innecesario

HBO 33 15

Introduzca el canal 15

sucesivo al canal de guía 33.

Nickelodeon 38 20

Introduzca el canal 20

sucesivo al canal de guía 38.

por ej.,

Mire en los canales de guía para las

estaciones en revistas.

Apunte todas las estaciones que

puede recibir.

Nota:

• Si ha conectado una caja TV de cable o un receptor de satélite, sistema

VCR Plus+ no funciona como no ha ajustado los canales de la guía.

1 Presione MENU.

2 Presione ◄► para

seleccionar “Config.”

3 Presione ▲▼ para

seleccionar “Prog.

Canales” y presione

ENTER.

Aj. Config. Func.

Idioma

Prog.Canales

RELOJ

Bloqueo

Subtítulos

Ponga Títulos

Otro Ajuste

PAJINA

VUELVE

ELIJA

4 Presione ▲▼ para

seleccionar “VCR PLUS+

Ajuste canal” y presione

ENTER.

5 Presione ▲▼ para

seleccionar el canal de

guía que quiere ajustar y

presione ►.

• Cuando seleccione el canal

guía, presione y mantenga

presionado ▲▼ para

desplazarse por la pantalla

hacia arriba y hacia abajo.

PROGRAM

CHANNEL

Sistema de la antena CATV

Ajus. automát. del canal

VCR Plus+ Ajuste canal

PROGRAM

CHANNEL

VCR Plus+ Ajuste canal

Canal de guía Canal CATV

125

- - -

6 Presione ▲▼ para seleccionar el canal

correspondiente al de guía y presione ◄.

• Para borrar un número, presione CANCEL.

• Repita los pasos 5 y 6 para introducir otros canales.

7 Presione ENTER.

PROGRAM

CHANNEL

VCR Plus+ Ajuste canal

Canal de guía Canal CATV

- - -

Selección del modo de entrada

1 Presione INPUT.

• La exhibición cambiará de la siguiente manera.

Sintonizador: Se exhibe la señal de fuente conectada al terminal

VHF/UHF.

Video 1: Se exhibe la señal de fuente conectada al terminal 1 de

entrada AV.

Video 2: Se exhibe la señal de fuente conectada al terminal 2 de

entrada AV.

Componente: Se exhibe la señal de fuente conectada al terminal de

entrada COMPONENT.

HDMI: Se exhibe la señal de fuente conectada al terminal de

entrada HDMI.

Video 1*

Componente*

Video 2*

HDMI*

Sintonizador*

 Método 1:

1 Presione CH ▲▼.

• La exhibición cambiará de la

siguiente manera.

(TV)

CH69

(CABLE)

CH125

(TV)

CH2

(CABLE)

CH1

Video 1*

Componente*

Video 2*

HDMI*

 Método 2

Information

Controles ASPECT

NORMALCOMPLETOZOOMJUSTO

Esta función le permite poder ver la imagen en su tamaño máximo,

incluyendo la imagen panorámica de formato de cine.

1 Presione ASPECT para seleccionar el modo de

pantalla.

Modo Imagen Explicación

JUSTO



En el modo JUSTO una

imagen 4:3 se exhibirá en

su tamaño máximo pero

con una corrección de

aspecto aplicada a los lados

de la pantalla de modo

que el alargamiento sólo

se percibirá en los bordes

izquierdo y derecho de la

pantalla. El tamaño de la

imagen dependerá de la

señal original.

ZOOM

En el modo ZOOM la sección

central de la imagen se

ampliará.

COMPLETO

En el modo COMPLETO la

imagen se exhibirá en su

tamaño máximo pero con un

ligero alargamiento.

NORMAL

En el modo NORMAL una

imagen 4:3 se exhibirá en

su tamaño estándar 4:3 sin

alargamiento.

 Seleccione el canal que desee:

Presione las teclas CH ▲▼ o NUMBER.

 Ajuste el nivel de volumen que desee:

Presione VOL + o VOL –.

Uso del botón CH/VOL

Cuando esté seleccionando canales de CABLE del 100 al 125 con

las teclas NUMBER.

1 Presione R-TUNE para exhibir el último canal que

estaba mirando.

 Ejemplo 1:

Para seleccionar el canal 125, primero presione la tecla 1, luego

2, luego 5.

 Ejemplo 2:

Para seleccionar el canal 12, primero presione la tecla 1, luego

 Ejemplo 3:

Para seleccionar el canal 2, primero presione la tecla 0, luego 2.

Sintonización rápida

Uso de la tecla Number

1 Presione MUTE para apagar instantáneamente el

sonido. Presione de nuevo para restaurar el sonido

a su nivel anterior.

Apagado del audio

Discos que sólo se pueden reproducir

Tipo de disco

Logotipo

del disco

Instrucciones

Indicación

en estas

instrucciones de

funcionamiento

DVD-Audio

Discos de música de alta

fidelidad

• Reproducidos en esta

unidad en 2 canales.

DVD-A

DVD-Vídeo

Discos de películas y

música de alta calidad

DVD-V

Vídeo CD

Música y video grabados

(incluyendo CD-R/RW)

VCD

Audio CD

Audio y música

grabados (incluyendo

CD-R/RW)

CD-R y CD-RW con

música grabada en MP3

(pág. 88)

(CD-DA)

MP3

(MP3)

Funcionamiento del disco / tarjeta de

memoria

Discos que pueden grabarse y reproducirse

Tipo de disco

Logotipo del

disco

Indicación en estas

instrucciones de

funcionamiento

DVD-R

DVD-RAM

RAM

Tarjetas capaces de exhibir y guardar

Tipo de tarjeta Logotipo de tarjeta

Indication in these

operating instructions

Tarjeta de

Meemoria SD

MultiMediaCard

1 Presione OPEN/CLOSE en la unidad para abrir la

bandeja e introducir un disco.

• Presione el botón de nuevo para cerrar la bandeja.

Introduzca el disco con la

etiqueta en el lado superior.

Introduzca el disco en la guía

de la bandeja.

 Disco sin cartucho

Introduzca el disco con la etiqueta en el

lado superior, con la flecha señalando

hacia el

interior.

 Disco con cartucho

Introducción de un disco

Bandeja del disco.

• Finalice* el disco después de grabarlo.

*Proceso que permite reproducir discos en equipos compatibles.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Insertar/sacar la tarjeta

Sólo inserte o saque la tarjeta tras haber

apagado la unidad.

Cuando parpadea el indicador “SD” en la pantalla de la unidad,

quiere decir que se está leyendo de la tarjeta o escribiendo en

ella. No corte la alimentación ni saque la tarjeta, pues hacerlo

podría ocasionar un funcionamiento erróneo o pérdida del

contenido de la tarjeta.

 Insertar una tarjeta

Inserte la tarjeta (con la etiqueta cara

arriba y la esquina recortada a la

derecha) y manténgala en su lugar

hasta que oiga un clic.

esquina

recortada

 Sacar la tarjeta

Presione el centro de la tarjeta y a

continuación tire de ella y sáquela.

• En los discos de dos caras, no es posible grabar de manera continua

desde una cara a la otra. Deberá expulsar el disco y darle la vuelta.

• Cuando utilice DVD-RAM de 8 cm, saque el disco del cartucho.

• Podrá grabar hasta 99 títulos en un solo disco.

• Es posible grabar emisiones digitales que permiten “grabación única” al

utilizar discos DVD-RAM compatibles con CPRM. Y no será posible grabar

emisiones digitales que permitan “grabación única” al utilizar DVD-R.

• Los DVD-RAM/DVD-R tienen limitaciones de grabación.

• La grabación se realizará en el espacio disponible del disco. Los datos no

se sobrescribirán.

• Si no queda espacio en el disco de grabación, debe borrar títulos que no

desee o usar un nuevo disco.

• No se pueden grabar discos DVD-R finalizados.

1 Presione OPEN/CLOSE en la unidad para abrir la

bandeja e introducir un disco.

2 Presione las teclas CH ▲▼ o las teclas numéricas

para seleccionar el canal.

3 Presione REC MODE para seleccionar el modo de

grabación (XP, SP, LP o EP).

4 Presione REC para iniciar la grabación.

 Para detener la grabación

Presione STOP.

• Se grabará como un título hasta la posición donde se detiene.

•

DVD-R

DVD-R la unidad tardará aproximadamente

30 segundos en completar la información de gestión de la

grabación cuando ésta haya finalizado.

 Para realizar una pausa durante la grabación

Presione PAUSE.

Presione PAUSE de nuevo para reanudar la grabación.

 Para seleccionar con las teclas numéricas

(NUMBER):

 Para especificar una hora para detener la

grabación

Durante la grabación

Presione REC en la unidad o en el control remoto para

seleccionar la hora de grabación.

Cada vez que presione el botón:

* Para grabar sonido usando LPCM (solo es posible en modo XP):

Seleccione “LPCM” en “Modo Audio para grab. XP” (la calidad de la

imagen puede disminuir ligeramente).

OFF 0:30 1:00 1:30

2:004:00 3:00

DVD-RRAM

XP*

LP EP

Grabación de programas de televisión

Modos de grabación y tiempo aproximado

de grabación

Según el contenido a ser grabado, los tiempos de grabación

pueden salir más cortos que los señalados.

Nota:

• Cuando se graba en DVD-RAM usando el modo EP (8H), la reproducción

puede no ser posible en unidades DVD que sean compatibles con DVD-

RAM. En este caso utilice el modo EP (6H).

EP (6 H)

EP (8 H)

Calidad de imagen

Tiempo de la grabación

DVD-RAM

DVD-R

(4,7 GB)

De un solo lado

(4,7 GB)

Doble lado

(9,4 GB)

XP (Alta calidad) 12

SP (Normal) 24

LP (Larga duración) 48

EP (Reproducción de

muy larga duración)

8 (6

) 16*1 (12

*1*2

)8 (6

)

Disc

Recording

Mode

El tiempo de grabación de un disco a doble cara es la suma total de las

dos caras del disco.

Cuando en el menú SETUP se ha ajustado a “EP (6H)” el “Tiempo de

grab. en el modo EP”. La calidad del sonido se baja, en comparación con

otros modos de grabación, cuando se usa “EP (8H)”.

(Unidad: hora)

p. ej., 5: [0] → [5]

15: [1] → [5]

115: [1] → [1] → [5]

Information

Puede introducir hasta 16 programas con un adelanto de un mes.

 Precauciones en la grabación temporizada

Cuando llega el tiempo que se definió, la grabación

temporizada inicia automáticamente.

• La grabación temporizada puede iniciar mientras la unidad

está tanto apagada como encendida. Cuando la unidad está

apagada, el sonido y el vídeo no salen en el televisor.

DVD-RRAM

Grabacione con temporizador

1:58 SPTiempo grabación restante

3/29 LUN 12:53 PM

GRABACION

TEMP.

MODO

DESACTCANAL FECHA

Nuevo programa

5:10 PM4:20 PM SP

VERIF

Habilitar

N°

01 3/29 LUN

 Uso del sistema VCR Plus+

Una forma fácil de grabar con temporitzador es ingresando

número de VCR Plus+. Puede encontrar estos códigos en las

programaciones televisivas de periódicos y revistas.

1 Presione VCR Plus+.

2 Presione las teclas

NUMBER para introducir

el número PlusCode.

• Presione ◄ para volver a la cifra

correcta.

3 Presione ENTER.

4 Presione ENTER.

• Se almacena la configuración.

5 Presione RETURN.

• “ ” se iluminará en el panel delantero para indicar que se ha

activado el modo de espera de la grabación con temporizador.

• Para cancelar la grabación una vez que ya ha comenzado la

grabación, mantenga presionado el STOP durante unos pocos

segundos.

• Repita los pasos 1~4 para programar otras grabaciones.

1:58 SPVCR Plus+ Tiempo grabación restante

3/29 LUN 12:53 PM

Introducir el número de código PLUS

utilizando la tecla 0-9.

N°

1:58 SPTiempo grabación restante

3/29 LUN 12:53 PM

GRABACION

TEMP.

MODO

DESACTCANAL FECHA

5:10 PM4:20 PM3/29 LUN 39 SP

Intr.ir nomb.

1 Presione PROG/CHECK.

2 Presione ▲▼ para seleccionar “Nuevo programa” y

presione ENTER.

 Programación manual

1:58 SPTiempo grabación restante

3/29 LUN 12:53 PM

GRABACION

TEMP.

Nuevo programa

5:10 PM4:20 PM SP

Habilitar

01 3/29 LUN

Pulsar ENTER o VCR Plus+ para

introducir un nuevo programa.

MODO

DESACTCANAL FECHA

VERIFN°

La línea resaltada

estará preparada para la

programación.

1:58 SPTiempo grabación restante

3/29 LUN 12:53 PM

GRABACION

TEMP.

64 5:10 PM4:20 PM SP

Habilitar

01 3/29 LUN

MODO

DESACTCANAL FECHA

VERIFN°

Nuevo programa

64 8:00 PM7:00 PM SP

Habilitar

02 4/5 LUN

• FECHA

Fecha

Temporizador diario

Temporizador semanal

Fecha actual hasta un mes más tarde

menos un día

DOM–SAB→ LUN–SAB → LUN–VIE

DOM SEMANAL →---→ SAB SEMANAL

4 Presione ENTER.

3 Presione ► para desplazar y cambiar los detalles

con ▲▼.

5 Presione RETURN.

• “ ” se iluminará en el panel delantero para indicar que se ha

activado el modo de espera de la grabación con temporizador.

• Para cancelar la grabación una vez que ya ha comenzado la

grabación, mantenga presionado el STOP durante unos pocos

segundos.

1:58 SPTiempo grabación restante

3/29 LUN 12:53 PM

GRABACION

TEMP.

MODO

DESACTCANAL FECHA

8:00 PM7:00 PM4/5 LUN64

Intr.ir nomb.

• Repita los pasos 2~4 para programar otras grabaciones.

Controle, cambie o borre el programa

1 Presione PROG/CHECK.

 Para cambiar un programa

Presione ▲▼ para seleccionar el programa y luego presione

ENTER.

Presione ◄► para desplazarse por las opciones y cambiarlas

con ▲▼, y a continuación presione ENTER.

 Para borrar un programa

Presione ▲▼ para seleccionar el programa y a continuación

presione CANCEL.

• No puede borrar programas que se estén grabando en este

momento.

 Para poner la unidad en el modo de espera de

grabación con temporizador

Presione RETURN.

• “ ” se iluminará en el panel delantero para indicar que se ha

activado el modo de espera de la grabación con temporizador.

2 Presione RETURN.

• La lista de grabación con temporizador desaparece.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

1 Presione PLAY/×1.3 durante la grabación o la

grabación temporizada.

 Reproducción seguida

Es posible empezar la reproducción desde el comienzo de un

título mientras lo sigue grabando.

1 Presione DIRECT NAVIGATOR durante la grabación

o la grabación temporizada.

2 Presione ▲▼◄► para seleccionar el título y

presione ENTER.

 Grabación y reproducción simultáneas

Es posible comenzar la reproducción del título que se está

grabando o reproducir un título grabado anteriormente.

1 Presione TIME SLIP durante la grabación o la

grabación temporizada.

• La reproducción comienza a partir de los 30 segundos anteriores

a ese momento. Lo que se esté grabando en este momento

aparecerá como una imagen incrustada; asimismo oirá el audio de la

reproducción.

2 Presione ▲▼ para seleccionar el tiempo y presione

ENTER.

 Time Slip

Es posible reproducir el título que se está grabando para

controlar su correcta grabación. Es también posible controlar las

partes grabadas anteriormente.

Reproducción durante la grabación

RAM

1 Presione OPEN/CLOSE en la unidad para abrir la

bandeja e introducir un disco.

• Presione el botón de nuevo para cerrar la bandeja.

2 Presione PLAY/×1.3

• La unidad tardará un cierto tiempo en leer el disco antes de iniciar la

reproducción.

 Detener la reproducción

Presione STOP.

• Presione STOP de nuevo para volver a la pantalla de

televisión.

DVD-V

DVD-A

VCD

MP3

• Cuando el mensaje “PLAY” parpadee en la pantalla delantera,

la función de reanudación estará activada.

• El protector de pantalla puede aparecer cuando se detiene

la reproducción. Presione STOP de nuevo y podrá utilizar el

sintonizador de esta unidad para ver televisión.

 Pausar la reproducción

Presione PAUSE.

• Presione PAUSE de nuevo para reanudar la reproducción.

DVD-A VCD CDDVD-R DVD-VRAM MP3

Reproducción de discos

 Para cancelar la función de reanudación (sólo en

reproducción normal)

Presione STOP mientras la unidad recuerda la posición. (La

posición también se borrará cuando apague la unidad o abra la

bandeja del disco.)

Iniciar la reproducción desde el punto en que

se detuvo (función de reanudación)

DVD-A VCD CDDVD-R DVD-VRAM MP3

1 Presione STOP durante la reproducción.

• El mensaje “PLAY” parpadea en la pantalla de la unidad (únicamente

en la reproducción normal). La unidad memorizará la posición.

2 Presione PLAY/×1.3

• La reproducción se iniciará desde el punto en que se detuvo.

Selección de programas grabados (títulos)

para reproducirlos

1 Presione DIRECT

NAVIGATOR.

2 Presione ▲▼◄► para seleccionar el título y

presione ENTER.

• También puede seleccionar títulos con las teclas de número.

 Para detener la reproducción

Presione STOP.

 Para salir de la pantalla

Presione RETURN o DIRECT NAVIGATOR.

Avance rápido y rebobinado (búsqueda)

1 Presione ►► FF/SLOW o ◄◄ REW/SLOW durante la

reproducción.

• Presione los botones ►►Ι o Ι◄◄ de la unidad y manténgalos presionados.

• La velocidad se incrementará hasta un máximo de 5 pasos.

• Presione PLAY/×1.3 para volver a la velocidad normal.

Repr.

SUB MENU

07 08

- -

- - - - - -

10 10/27 Lun 8 10/27 Lun

Ant. Sig.

Seleccionar

DIRECT NAVIGATOR Vista titulo

DVD-RAM

02/02

• Si introduce un número mayor que el número total de títulos, se

seleccionará el último título.

DVD-RRAM

p.ej., 5: [0] → [5] 15: [1] → [5]

DVD-A VCD CDDVD-R DVD-VRAM MP3

Iconos de la pantalla de DIRECT NAVIGATOR

Título protegido.

Título que no se grabó durante la protección de grabación (emisiones

digitales, etc.).

Título que no puede reproducirse porque los datos están dañados.

Grabando actualmente.

Information

Saltar pistas

1 Presione SKIP ►►Ι o SKIP Ι◄◄ durante la

reproducción o en el modo de pausa.

• En la unidad, presione ►►Ι o Ι◄◄ .

• Cada vez que presione estos botones, el número de saltos se

incrementará.

Avanzar un minuto (salto CM)

1 Presione CM SKIP durante la reproducción.

• La reproducción se reanudará al cabo de aproximadamente un

minuto.

DVD-A VCD CDDVD-R DVD-VRAM MP3

DVD-RRAM

Nota:

• Si el inicio del programa siguiente está dentro de un minuto desde el

punto en que saltó, la reproducción se reiniciará desde el principio de ese

programa.

Inicio desde un elemento seleccionado

p.ej., 5: [0] → [5]

15: [1] → [5]

MP3

p.ej., 5: [0] → [0] → [5]

15: [0] → [1] → [5]

115: [1] → [1] → [5]

Reproducción en cámara lenta

1 Presione ►► FF/SLOW o ◄◄ REW/SLOW con la

reproducción en pausa.

•

Presione los botones ►►Ι o Ι◄◄ de la unidad y manténgalos presionados.

• Cuando la reproducción en cámara lenta continúa durante

aproximadamente 5 minutos, se pondrá en pausa automáticamente.

 Para volver a la velocidad normal

Presione PLAY/×1.3.

Iniciar la reproducción desde un título, capítulo o pista

seleccionados.

DVD-A VCD CDDVD-R DVD-VRAM MP3

1 Presione las teclas NUMBER para seleccionar el

elemento durante la reproducción o cuando esté

detenida.

DVD-A

VCD

DVD-R

DVD-V

RAM

(Sólo partes de imagen animada)

Vista rápida



Para volver a la velocidad normal

Presione PLAY/×1.3.

RAM

(Sólo con Dolby Digital)

La velocidad de reproducción puede incrementarse sin distorsionar

el audio.

1 Presione PLAY/x1.3 y manténgalo presionado

durante la reproducción.

Visualización fotograma a fotograma

1 Presione FRAME ΙΙ► o FRAME ◄ΙΙ con la

reproducción en pausa.

 Para volver a la velocidad normal

Presione PLAY/×1.3.

Exhibición de la imagen de televisión como

imagen incrustada

1 Presione TIME SLIP durante la reproducción.

• La unidad exhibe la imagen del televisor como imagen incrustada

• Oirá el audio de la reproducción.

• Presione TIME SLIP de nuevo para cancelar.

 Para mostrar las imágenes reproducidas

completas

Presione TIME SLIP.

DVD-A

VCD

DVD-R

DVD-V

RAM

(Sólo partes de imagen animada)

DVD-RRAM

Saltar hasta la hora especificada (Time Slip)

1 Presione TIME SLIP

durante la reproducción.

2 Presione ▲▼ para seleccionar la hora mientras se

muestra la indicación.

• El indicador de tiempo se apagará al cabo de 5 segundos, pero se

volverá a encender cuando configure el indicador.

• Presione ▲▼ para cambiar el tiempo en unidades de un minuto.

Presione ▲▼ y manténgalos presionados para cambiar el tiempo en

unidades de 10 minutos.

3 Presione ENTER.

• La reproducción saltará hasta la hora especificada.

REPR.

0 min

DVD-RRAM

Para borrar un programa que se esté

reproduciendo

1 Presione ERASE durante la reproducción.

• Se exhibirá una pantalla de confirmación.

2 Presione ◄►para seleccionar “Borrar” y luego

presione ENTER.

Borrar

Borrar Cancelar

Tiempo grabación restante 2:40(EP)

Se borrará el respectivo capítulo

de la LISTA DE REPRODUCCION.

Puede borrar títulos mientras se están reproduciendo.

DVD-RRAM

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

G 8

T 14

TOTAL

111

0 9

N°

ARBOL

G 7/25

música MP3

001 Mis favoritos

001 Pop brasileño

002 Pop chino

003 Pop checo

004 Pop húngaro

005 Notas de línea

006 Pop japonés

007 Pop mexicano

008 Pop filipino

009 Pop sueco

001 Momoko

002 Número estándar

001 Solo de piano

002 Vocal

TOTAL PISTA

ARBOL

G 1

T 1

TOTAL

111

0 9

N°

N° GRUPO

Ant. Sig.

001 Ambos extremos congelados

002 Estrella de mar

003 Vida en Júpiter

004 Pegamento metálico

005 Píntalo de amarillo

006 Pyjamamama

007 Camarones de Marte

008 Starperson

009 Velvet Cuppermine

010 Estrella de mar Ziggy

1 : Mis favoritos

Esta unidad puede reproducir archivos MP3 grabados en CD-R/RW

con un computador. Los archivos tratados como pistas y carpetas

se tratarán como grupos.

2 Presione ▲▼ para seleccionar la pista y presione

ENTER.

• La reproducción seguirá hasta la última pista en el último grupo.

• “

” indica la pista que se está reproduciendo.

• También puede seleccionar la pista con las teclas numéricas.

Grupo seleccionado

 Para mostrar otras páginas

Presione ▲▼◄► para seleccionar “Ant.” o “Sig.” y presione

ENTER.

• Después de especificar en una lista todas las pistas de un

grupo, aparecerá la lista del grupo siguiente.

 Para salir de la pantalla

Presione RETURN o TOP MENU.

2 Presione ► para visualizar la pantalla con estructura

de árbol mientras se muestra la lista de archivos.

Presione ▲▼◄► para seleccionar un grupo y

presione ENTER.

• Aparecerá la lista de archivos del grupo.

No podrá seleccionar grupos que

contengan archivos no compatibles.

Nº de grupos seleccionado/nº total

de grupos.

Si el grupo no tiene ninguna pista,

se mostrará “_ _” como número de

grupo.

Utilizar menús para reproducir MP3

1 Presione TOP MENU durante la reproducción o el

modo detenido.

G: Grupo n.°

T: n.° de pista en el grupo

TOTAL: n.° de pista./n.° total de pistas

en todos los grupos

MP3

0002

- - - - - - - -- - - -- - - -

001/001

Carpeta 100_PANA

Ant. Sig.

00030001 0004

0006 0007 00080005

DIRECT NAVIGATOR Vista de im.(JPEG)

IMAGEN

Repr.

SUB MENU Seleccionar

SD CARD

Reproducción de imágenes fijas de la tarjeta

o DVD-RAM

4 Presione ▲▼◄►para seleccionar la imagen fija y

presione ENTER.

• Puede también seleccionar títulos con las teclas NUMBER.

 Para detener la reproducción

Presione STOP.

 Para salir de la pantalla

Presione DIRECT NAVIGATOR.

1 Inserte un DVD-RAM o una tarjeta.

2 Presione SD o DVD para seleccionar la unidad.

3 Presione DIRECT NAVIGATOR.

•

RAM

Presione ▲▼◄► para seleccionar la pestaña “IMAGEN” y a

continuación presione ENTER.

p.ej., Tarjeta

5 Presione ▲▼◄► para

seleccionar “Carpeta” y

presione ENTER.

6 Presione ▲▼ para seleccionar la carpeta y presione

ENTER.

• Puede también seleccionar títulos con las teclas NUMBER.

0002

- - - - - - - -- - - -- - - -

001/001

Carpeta 100_PANA

Ant. Sig.

00030001 0004

0006 0007 00080005

DIRECT NAVIGATOR Vista de im.(JPEG)

IMAGEN

Repr.

SUB MENU Seleccionar

SD CARD

RAM SD

p.ej., 5: [0] → [0] → [0] → [5]

15: [0] → [0] → [1] → [5]

115: [0] → [1] → [1] → [5]

1115: [1] → [1] → [1] → [5]

 Para seleccionar las imágenes fijas de otra

carpeta

p.ej., 5: [0] → [0] → [5]

15: [0] → [1] → [5]

115: [1] → [1] → [5]

Funciones útiles durante la reproducción de

imágenes fijas

RAM SD

1 Presione ▲▼◄►para seleccionar una imagen en

la pantalla DIRECT NAVIGATOR y a continuación

presione ENTER.

• La imagen seleccionada se exhibe en la pantalla completa.

2 Presione SUB MENU.

3 Presione ▲▼ para seleccionar “Girar a DERECHA”

o “Girar a IZQUIERDA” y presione ENTER.

 Girar

 Acercar con zoom/Alejar con el zoom

(Sólo para imagen fija con número bajo de píxeles)

1 Presione ▲▼◄►para seleccionar una imagen en la

pantalla DIRECT NAVIGATOR y presione ENTER.

2 Presione SUB MENU.

3 Presione ▲▼ para seleccionar “Acercar con zoom”

y presione ENTER.

• Para devolver a la imagen su tamaño original, presione ▲▼ para

seleccionar “Alejar con el zoom” en el paso 3 y a continuación

presione ENTER.

Utilizar la pantalla con estructura de árbol para encontrar un

grupo

Utilizar la pantalla con estructura de árbol para encontrar una

pista.

p.ej., 5: [0] → [0] → [5] 15: [0] → [1] → [5]

Information

DVD

Reproducir

Grabar

Copiado

/ Editar

Configurar

PROTECCIÓN DEL DISCO DES

LENGÜETA DE PROTECCIÓN DES

DVD-RAM

DIRECT NAVIGATOR

GRABACION TEMP.

COPIA

LISTA REPR.

SETUP

GRABACION FLEX.

CONF. DISCO

1 Presione MENU en modo de detención y a

continuación presione ◄► para seleccionar “Func.”

2 Presione ENTER.

3 Presione ▲▼◄► para seleccionar “CONF. DISCO”

o “AJUSTE TARJETA” y presione ENTER.

e. pj., DVD-RAM

Formatear un disco/Formatear una tarjeta

Notas:

• El formateo borra todo el contenido de un disco, incluyendo los datos del

computador. Compruébelos cuidadosamente antes de formatear.

• Algunos DVD-RAM no tienen formato. Formatéelos antes de utilizarlos en

esta unidad. El formateo también le permite borrar todo el contenido de un

disco.

 Para detener el formateo

Presione RETURN.

4 Presione ▲▼ para

seleccionar “Formateo

del disco” o “Formatear”

y presione ENTER.

5 Presione ◄► para

seleccionar “Sí” y

presione ENTER.

6 Presione ◄► para

seleccionar “Iniciar” y

presione ENTER.

• Aparecerá un mensaje cuando

haya finalizado el formateo.

7 Presione ENTER.

Notas:

• No apague la unidad ni desconecte el cable de alimentación de CA

mientras el mensaje “Formateando el disco” aparezca en el televisor.

Si lo hace, es posible que el disco no pueda utilizarse. (Este proceso

puede tardar hasta un máximo de 70 minutos (DVD-RAM). Si tarda más

de 2 minutos, puede cancelarlo pulsando RETURN. En este caso, el disco

deberá formatearse de nuevo).

• Todos los datos del disco se borrarán cuando se formatee, incluyendo

grabaciones realizadas con esta unidad. Los datos escritos en el disco

mediante un computador también se borrarán.

• Cuando un disco se ha formateado mediante esta unidad, es posible que

no sea posible utilizarlo en ningún otro equipo.

• El disco no podrá formatearse si la lengüeta de protección contra escritura

está en la posición protegida (PROTECT). Retire la protección para

continuar.

• La tarjeta SD no puede formatearse si la protección contra escritura se

cambia a “LOCK”. Quite la protección para continuar.

• Si se intenta formatear discos que esta unidad no puede usar, aparecerá

el mensaje “Formateo imposible.

• Los DVD-R y los CD-R/RW no pueden formatearse.

CONF. DISCO

Títulos 11

Usado 0:22

Espacio 5:38(EP)

DVD-RAM

Formateo del disco

Sí No

Formatear el disco borrará los contenidos.

Este proceso durará 1 minuto aprox.

¿ Iniciar formateo del disco ?

DVD-RAM

Iniciar Cancelar

CONF. DISCO

Títulos 11

Usado 0:22

Espacio 5:38(EP)

Formateo del disco

Todos los contenidos del disco se borrarán.

¿ Iniciar formateado del disco ?

RAM SD

Finalizar un disco

Puede reproducir DVD-R en reproductores DVD compatibles

finalizándolos en esta unidad y convirtiéndolos en DVD de

vídeo que cumplan con los estándares de DVD de vídeo.

4 Presione ▲▼ para

seleccionar “Cerrar” y

presione ENTER.

5 Presione ◄► para

seleccionar “Sí” y

presione ENTER.

Antes de la

finalización

Después de la

finalización

Pantalla del disco en esta

unidad

DVD-R DVD-V

Grabación/edición/introducción

de nombres

○ ×

Reproducción en otros

reproductores DVD

× ○

Es posible que los DVD-R finalizados en esta unidad no puedan leerse en

otros reproductores DVD debido a la condición de la grabación.

6 Presione ◄► para

seleccionar “Iniciar” y

presione ENTER.

• La finalización se iniciará.

• Cuando la finalización haya

terminado, aparecerá un

mensaje.

Notas:

• No desconecte el cable de alimentación de la CA mientras el mensaje

“Finalizando el disco” aparezca en el televisor. Si lo hace, el disco no

podrá utilizarse.

• El proceso de finalización puede tardar hasta 15 minutos.

• Sólo podrá finalizar DVD-R que se hayan grabado en esta unidad.

• No podrá grabar en DVD-R que se hayan finalizado

• Después de la finalización

- El disco sólo podrá reproducirse y ya no podrá grabar en él ni editarlo.

- Los DVD-R finalizados en esta unidad no pueden reproducirse en otros

reproductores DVD debido a la condición de la grabación.

- Se producirá una pausa de varios segundos entre los títulos.

- Los títulos se dividen en capítulos de unos 5 minutos*.

• Este tiempo puede variar en gran medida en función de la condición y el

modo de la grabación.

• Visite la página principal de Panasonic para obtener más información

acerca de los DVD.

Para EEUU: http://www.panasonic.com/playDVD-R

Para Canadá: http://www.panasonic.ca

7 Presione ENTER.

DVD-R

CONF. DISCO

Títulos 11

Usado 0:22

Espacio 5:38(EP)

Cerrar

Sí No

Este proceso durará xx minutos aprox.

¿ Es correcto cerrar el disco ?

DVD-R

(Únicamente para DVD-R grabados en esta unidad)

1 Presione MENU en modo de detención y a

continuación presione ◄► para seleccionar “Func.”

2 Presione ENTER.

3 Presione ▲▼◄► para seleccionar “CONF. DISCO”

y presione ENTER.

DVD-R

CONF. DISCO

Títulos 11

Usado 0:22

Espacio 5:38(EP)

Cerrar

Iniciar Cancelar

Si se cierra el disco,

sólo podrá reproducirse.

¿ Es correcto cerrar el disco ?

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Index

About LCD Panel ............................................................................ 2

Accessories .................................................................................... 2

AC Power Plug ............................................................................. 14

Adding and deleting channels ...................................................... 22

ASPECT Controls ......................................................................... 26

Audio Adjust ................................................................................. 31

AUDIO LEVELER .................................................................... 32

BASS, TREBLE, BALANCE, SURROUND, D.ENHANCER .... 31

HDMI ........................................................................................ 32

MODE ...................................................................................... 31

STEREO / SAP / MONO .......................................................... 32

Audio Mode for TV Viewing .......................................................... 27

Receivable Broadcast Types ................................................... 27

Audio Mute ................................................................................... 26

Audio Out connector ..................................................................... 14

Automatic Channel Setting ........................................................... 22

Before Requesting Service ........................................................... 72

Before using Disc/Card Functions ................................................ 34

Blocking Message ........................................................................ 30

Change Language Setting ............................................................ 24

Changing audio during play .......................................................... 48

Changing the unit’s settings ......................................................... 67

To Return to the Factory Settings ............................................ 67

Chapter operations (Direct Navigator) .......................................... 53

Combine Chapters ................................................................... 53

Divide Chapter ......................................................................... 53

Erase Chapter .......................................................................... 53

Chapter operations (Play list) ....................................................... 59

Add Chapter ............................................................................. 59

Combine Chapters ................................................................... 59

Divide Chapter ......................................................................... 59

Erase Chapter .......................................................................... 59

Move Chapter .......................................................................... 59

Clock Settings .............................................................................. 23

Auto Clock Setting ................................................................... 23

Manual Clock Setting ............................................................... 23

Time Zone Adjust ..................................................................... 23

Closed Caption System ................................................................ 30

Common procedures .................................................................... 49

Disc menu ................................................................................ 49

Play menu ................................................................................ 50

Component signal Input connector ............................................... 14

Connecting the “1, 2” AV Input Terminals .................................... 16

Connecting the Audio Output Terminal ........................................ 18

Connecting the COMPONENT VIDEO Input Terminals ............... 16

Connecting the Headphones / Earphones Jack ........................... 20

Connecting the RF in Terminal ..................................................... 15

Copy All Pictures .......................................................................... 66

Create chapters ............................................................................ 48

Creating play lists ......................................................................... 57

Customer Services Directory ........................................................ 79

Disc setting/Card setting .............................................................. 60

Disc Name ............................................................................... 60

Disc Protection ......................................................................... 60

Erase all titles ........................................................................... 60

Finalize ..................................................................................... 62

Format Disc/Format Card ........................................................ 61

Select First play ....................................................................... 61

Displaying the television image as a picture-in-picture ................ 46

DVD/SD Functions Window ......................................................... 35

Editing Still Pictures ...................................................................... 55

Editing still pictures folders ........................................................... 56

Editing titles/chapters and playing chapters ................................. 51

Entering text ................................................................................. 63

Fast forward and rewind (Search) ................................................ 45

Finalize ......................................................................................... 62

Flexible Recording (FR) ............................................................... 39

Format Disc/Format Card ............................................................. 61

Frame-by-frame viewing ............................................................... 46

Glossary ....................................................................................... 70

HDMI Connection ......................................................................... 17

HDMI Input connector .................................................................. 14

Important Safety Instructions .......................................................... 4

Information (Card) ........................................................................ 11

Card Handling .......................................................................... 11

SD Memory Card Write Protection ........................................... 11

Still Pictures ............................................................................. 11

Still picture folder structure ...................................................... 11

Information (Disc) ........................................................................... 8

Discs or Card you can use ......................................................... 9

Discs you can use for recording and play .................................. 9

Disc Composition Examples .................................................... 10

Disc Handling ........................................................................... 10

Play-only discs ........................................................................... 8

Region Management Information ............................................. 10

Which should I use, DVD-RAM or DVD-R? ............................. 10

Information (MP3) ......................................................................... 11

Naming folders and files .......................................................... 11

Tips for making MP3 discs ....................................................... 11

Information (Unit) ............................................................................ 8

DST (Daylight Saving Time) ...................................................... 8

Loading the Batteries ................................................................. 8

Initial Setup (Ready to Play) ......................................................... 21

Input Label .................................................................................... 28

Inserting/Removing the Card ........................................................ 34

Inserting a Disc ............................................................................. 34

Installation ...................................................................................... 2

Language Code List ..................................................................... 69

Limited Warranty .......................................................................... 78

Information

Maintenance ................................................................................. 76

Optical digital Audio Out connector .............................................. 14

Other Adjust ................................................................................. 33

3D Y/C ..................................................................................... 33

COLOR MATRIX ...................................................................... 33

FRONT DISPLAY .................................................................... 33

MPEG NR ................................................................................ 33

POWER SAVE ......................................................................... 33

VIDEO NR ................................................................................ 33

Phones Jack ................................................................................. 14

Picture Adjust ............................................................................... 32

ADVANCED ADJUST .............................................................. 33

BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT,

SHARPNESS, AI PICTURE, COLOR TEMP ........................... 32

PIC MODE ............................................................................... 32

Picture and folder operations ....................................................... 56

DPOF ....................................................................................... 56

Erase Picture/Erase Whole Folder ........................................... 56

Folder Name ............................................................................ 56

Set up Protection/Cancel Protection ........................................ 56

Start Slide Show/Slide Interval ................................................. 56

Playing discs ................................................................................ 44

Starting play from where you stopped it (Resume Function) ... 44

When a menu screen appears on the television ...................... 44

Playing play lists ........................................................................... 58

Playing still pictures on the Card or DVD-RAM ............................ 54

Playing while you are recording ................................................... 42

Chasing playback ..................................................................... 42

Simultaneous Recording and Play ........................................... 42

Time Slip .................................................................................. 42

Play list operations ....................................................................... 59

Edit → Change Thumbnail ....................................................... 59

Edit → Copy ............................................................................. 59

Edit → Create .......................................................................... 59

Edit → Enter Name .................................................................. 59

Erase ........................................................................................ 59

Properties ................................................................................. 59

Position/Size ................................................................................. 26

Quick View ................................................................................... 46

Q & A ............................................................................................ 76

Rapid Tune ................................................................................... 25

Recording and Playing Back a Closed Caption Program ............. 31

Recording from a video cassette recorder ................................... 43

Recording television programs ..................................................... 38

Recording modes and approximate recording times ............... 39

Remote Control Buttons ............................................................... 12

Reset all unit Memory Functions .................................................. 24

Selecting audio to record .............................................................. 39

Selecting Input Mode .................................................................... 25

Selecting recorded programs (titles) to play ................................. 45

Skipping ........................................................................................ 45

Skipping a minute forward (CM Skip) ........................................... 45

Skipping the specified time (Time Slip) ........................................ 46

Sleep Timer .................................................................................. 25

Slow-motion playback .................................................................. 46

Specifications ............................................................................... 77

Starting from a selected item ........................................................ 46

Status messages (Disc) ............................................................... 35

Table of Contents ........................................................................... 3

Timer Recording ........................................................................... 40

Check, change or delete a program ......................................... 41

Manually programming ............................................................ 40

Using VCR Plus+ system ......................................................... 40

Title operations (Direct Navigator) ................................................ 52

Edit → Change Thumbnail ....................................................... 53

Edit → Divide Title ................................................................... 53

Edit → Enter Name .................................................................. 52

Edit → Set up Protection/Cancel Protection ............................ 52

Edit → Shorten ......................................................................... 52

Erase ........................................................................................ 52

Properties ................................................................................. 52

To display information about the Still Pictures ............................. 54

To erase a program that is being played back ............................. 47

To View a Blocked Program/Movie .............................................. 30

Transferring (dubbing) still pictures .............................................. 64

TV Status & Clock Display ........................................................... 27

Unit Buttons .................................................................................. 13

Useful functions during still picture play ....................................... 55

Erase ........................................................................................ 55

Rotate ...................................................................................... 55

Zoom in/Zoom out .................................................................... 55

Using menus to play MP3 ............................................................ 47

Using the CH/VOL Button ............................................................ 25

Using the NUMBER keys ............................................................. 25

V-Chip Control Features ............................................................... 28

VCR Plus+ guide channel Settings .............................................. 24

VHF/UHF Antenna Input terminal ................................................. 14

Video Input 1, 2 connector ........................................................... 14

VIDEO NR .................................................................................... 33

Warning and Instruction Displays ................................................. 71

Panasonic Consumer Electronics Company,

Division of Matsushita Electric Corporation of America

One Panasonic Way Secaucus, New Jersey 07094

Panasonic Sales Company (“PSC”),

Division of Matsushita Electric of Puerto Rico, Inc.

Ave. 65 de Infantería, Km. 9.5

San Gabriel Industrial Park, Carolina, Puerto Rico 00985

Printed in Japan

LSQT0853 A

S0904-0

LSQT0853 A

Panasonic TV DVD Combo TC 22LR30 Manual de usuario

Marca: Panasonic

Modelo: TV DVD Combo TC 22LR30

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Este manual también es adecuado para

TC 22LR30

Descargar PDF

informe

En otros idiomas

English: Panasonic TV DVD Combo TC 22LR30 User manual

Panasonic TV DVD Combo TC 22LR30 Manual de usuario

Este manual también es adecuado para

Panasonic TV DVD Combo TC 22LR30 Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos