Panasonic TC 22LR30 Manual de usuario

Categoría
Reproductores de DVD
Tipo
Manual de usuario

Este manual también es adecuado para

Getting Started TV Operation Disc / Card Operation
LCD TV / DVD-Recorder Combination
Operating Instructions
Model No. TC-22LR30
MULTI FORMAT PLAYBACK
* Ability to play back may depend on
recording conditions.
As an ENERGY STAR
®
Partner, Matsushita Electric Corporation of
America has determined that this product or product model meets the
ENERGY STAR
®
guidelines for energy efficiency.
Please read these instructions carefully before attempting to connect, operate, or
adjust this product. Please save this manual.
Spanish Quick Use Guide is included.
(Guía para rápida consulta en español está incluida.)
LSQT0853 A
Information
Initial Setup and Connection Procedures are on page 21.
2
Before Using
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
On your purchase of one of the most sophisticated and reliable
products on the market today. Used properly, it will bring you and
your family years of enjoyment. Please fill in the information below.
The serial number is on the tag located on the back of your unit.
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for
replacement parts.
Date of Purchase __________________________________
Dealer Purchased From _____________________________
Dealer Address ___________________________________
Dealer Phone No. __________________________________
Model No. _______________________________________
Serial No. ________________________________________
1 Remote Control (EUR7624060)
2 Batteries “AA”
Congratulations
Accessories
Installation
To order accessories, call toll free 1-800-332-5368.
Receiver Location
Locate for comfortable viewing. Avoid placing where sunlight or
other bright light (including reflections) will fall on the screen. Use
of some types of fluorescent lighting can reduce Remote Control
transmitter range.
Adequate ventilation is essential to prevent internal component
failure. Keep away from areas of excessive heat or moisture.
Optional External Equipment
The Video / Audio connection between components can be made
with shielded video and audio cables. For best performance,
antenna cables should utilize 75 coaxial shielded wire. Cables
are available from your dealer or electronic supply store. Before you
purchase any cables, be sure you know what type of output and
input connectors your various components require. Also determine
the length of cable you’ll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures,
high-contrast pictures may not be displayed clearly. Turn off
florescent lamps near the LCD and place in a location not exposed
to outdoor light.
Adjust viewing position
The LCD screen can be tilted up to 10° rearward.
The red, blue, and green dots on the screen are a characteristic of
the LCD panel and not a malfunction.
Please note that extremely high precision technology is employed to
produce the LCD Monitor screen resulting in a 99.99 % pixel effective rate.
This leaves only 0.01 % pixels inactive or always lit.
About LCD Panel
1 F-Type Antenna
Connector (for 4C-2V)
(K1RKZBA00001)
3
Getting Started
Table of Contents
Getting
Started
TV
Operation
Disc / Card
Operation
Information
Before Using ........................................................................................................ 2
Important Safety Instructions ............................................................................. 4
Information ........................................................................................................... 8
Location of Controls ......................................................................................... 12
Connections ....................................................................................................... 15
Initial Setup –Ready to Play– ........................................................................... 21
Tuning TV ........................................................................................................... 22
TV Operation ...................................................................................................... 25
TV Settings ......................................................................................................... 28
Before Using the Disc or Card ......................................................................... 34
DVD/SD Functions Windows and Status Messages ...................................... 35
Function List ...................................................................................................... 36
Recording ........................................................................................................... 38
Timer Recording ................................................................................................ 40
Various Recording............................................................................................. 42
Playing Discs ..................................................................................................... 44
Various Playback ............................................................................................... 45
Using On-screen Menus ................................................................................... 49
Editing the Recorded Programs (Using the Direct Navigator) ...................... 51
Editing and Playing Still Pictures (Using the Direct Navigator) .................... 54
Using Play List ................................................................................................... 57
Disc Setting / Card Setting ............................................................................... 60
Entering Text ...................................................................................................... 63
Transferring (Dubbing) Still Pictures ............................................................... 64
Changing the Unit’s Settings ........................................................................... 67
Glossary ............................................................................................................. 70
Helpful Hints ...................................................................................................... 71
Specifications .................................................................................................... 77
Limited Warranty ............................................................................................... 78
Customer Services Directory ........................................................................... 79
Guía rápida de uso en español ........................................................................ 80
Index ................................................................................................................... 90
TV Operation Disc / Card Operation Information
4
Important Safety Instructions
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Important Safety Instructions for this unit
1) Read these instructions.
All the safety and operating instructions should be read before
the appliance is operated.
2) Keep these instructions.
The safety and operating instructions should be retained for
future reference.
3) Heed all warnings.
All warnings on the appliance and in the operating instructions
should be adhered to.
4) Follow all instructions.
All operating and use instructions should be followed.
5) Do not use this apparatus near water.
For example, near a bathtub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool, and
the like.
6) Clean only with dry cloth.
Do not use liquid cleaners or aerosol cleaners. Use a dry cloth
for cleaning.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Slots and Openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect
it from overheating. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar
surface.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or
the manufacturer’s instructions have been adhered to.
9) Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments / accessories specified by the
manufacturer.
The exclamation point within a
triangle is intended to tell the
user that important operating and
servicing instructions are in the
papers with the appliance.
The lightning flash with arrow
head within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to persons.
Note to CATV System Installer:
This reminder is provided to direct the CATV system installer’s attention to Article 820–40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical.
12) Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart / apparatus
combination to avoid injury from tip-over.
Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.
13) Unplug this apparatus during lightning storms or when unused
for long periods of time.
This will prevent damage to the product due to lightning and
power-line surges.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15) To prevent electric shock, ensure the grounding pin on the AC
cord power plug is securely connected.
16) If an outside antenna is connected to the television equipment,
be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges.
In the U.S. Selection 810-21 of the National Electrical Code
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC
- NATIONAL ELECTRICAL CODE
5
Getting Started
Important Information Regarding Use of Video Games, Captions or Other Fixed Image Displays.
The extended use of fixed image program material can cause a permanent “shadow image” on the LCD panel. This background image
is viewable on normal programs in the form of a stationary fixed image. This type of irreversible LCD panel deterioration can be limited
by observing the following steps:
A. Reduce the brightness / contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.
This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury.
Disposal of these materials may be regulated in your community due to environmental considerations.
For disposal or recycling information please contact your local authorities, or the Electronics Industries
Alliance: www.eiae.org.
NOTE:
This equipment is designed to operate in the U.S.A. and other countries where the broadcasting system and AC house current is exactly the same as in
the U.S.A..
The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is not covered by Warranty. This
product is not designed to display fixed image patterns for extended periods of time.
17) An outside antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When
installing an outside antenna system extreme care should be
taken to keep from touching such power lines or circuits as
contact with them might be fatal.
18) Unplug this unit from the wall outlet, and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the unit to normal operation.
e. If the unit has been dropped or the cabinet has been
damaged.
f. When the unit exhibits a distinct change in performance
- this indicates a need for service.
19) When replacement parts are required, be sure the service
technician uses replacement parts specified by the
manufacturer that have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
20) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES,
CUPS, COSMETICS, ETC.) ABOVE THE SET. (INCLUDING
ON SHELVES ABOVE, ETC.)
21) CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE
THIS PLUG WITH A RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
6
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
AS WITH ANY SMALL OBJECT, SD CARS CAN BE SWALLOWED BY YOUNG CHILDREN. DO NOT ALLOW
CHILDREN TO HANDLE THE SD CARD.
WARNING
CAUTION:
UNIT IS A CLASS I LASER PRODUCT.
HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF
DIRECTED. BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.
WHEN THIS UNIT IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC
TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT ATTEMPT TO REPAIR THE UNIT YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
(Inside of product)
CAUTION:
LASER RADIATION WHEN OPEN. DO NOT STARE INTO
BEAM.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098, 4,907,093, and 6,516,132 licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by U.S. Patents and other intellectual property rights. Use of
this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision. Reverse engineering or dis as sem bly is prohibited.
ATTENTION:
RAYONNEMENT LASER EN CAS D’OUVERTURE.
NE PAS REGARDER DANS LE FAISCEAU.
7
Getting Started
Dear Panasonic Customer
Welcome to the Panasonic family of customers.
We hope that you will have many years of enjoyment from your new LCD TV/DVD-Recorder.
To obtain maximum benefit from your set, please read these instructions before making any adjustments, and retain them for
future reference.
Retain your purchase receipt, and record the model number and serial number of your set in the space provided on the rear
cover of these instructions.
For assistance, please call : 1-800-211-PANA (7262)
or send e-mail to : consumerproducts@panasonic.com
or visit us at www.panasonic.com/contactinfo
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com/contactinfo
Federal Communication Commission Information
(U.S.A.)
(Puerto Rico)
This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause or receive interference, which can be determined by turning equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the TV antenna.
Increase the separation between TV and other equipment.
Connect TV into separate outlet from other equipment.
Consult the dealer or an experienced radio / TV technician for help.
FCC Caution: Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications not expressly approved by Matsushita
Electric Corporation of America could result in harmful interference and would void the user’s authority to operate this equipment.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
SD Logo is a trademark.
Portions of this product are protected under copyright low and are provided under license by ARIS/
SOLANA/4C.
Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby Laboratories.
VCR Plus+ and PlusCode are registered trademarks of Gemstar Development
Corporation. The VCR Plus+ system is manufactured under license from
Gemstar Development Corporation.
Pats. 5,307,173; 5,335,079; 4,908,713; 4,751,578; and 4,706,121
“DTS” and “DTS2.0 + Digital Out” are trademarks of Digital Theater Systems, Inc.
MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and
Thomson multimedia.
8
Information
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Insert so the poles (+ and - ) match those in the Remote Control.
Do not use rechargeable type batteries.
Do not:
Mix old and new batteries.
Use different types at the same time.
Heat or expose to flame.
Take apart or short circuit.
Attempt to recharge alkaline or manganese batteries.
Use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the Remote Control is not going to be used for a long
period of time. Store in a cool, dark place.
* A process that allows play on compatible equipment.
Loading the Batteries
Play-only discs
Discs that cannot be played
2.6 and 5.2 GB DVD-RAM, 12 cm (5˝)
3.95 and 4.7 GB DVD-R for Authoring
Unfinalized DVD-R recorded on other equipment (refer to “Finalize” on
page 70)
PAL discs (you can still play the audio on DVD-Audio)
DVD-Video with a region number other than “1” or “ALL”
DVD-ROM, DVD-RW, +R, +RW, CD-ROM, CDV, CD-G, Photo CD, CVD,
SVCD, SACD, MV-Disc, PD , Divx Video Disc, etc.
DVD-Video
You can play discs with these symbols.
CD-R and CD-RW discs
This unit can play finalized* CD-R/CD-RW (audio recording disc)
recorded in CD-DA (digital audio), Video CD or MP3 format. Some
CD-R or CD-RW may not be played due to the condition of the
recording.
Unit auto adjusts clock for DST (Daylight Saving Time.)
DST (Daylight Saving Time)
If your area does not observe Daylight Saving Time, select DST : OFF
(refer to “Manual Clock Setting” on page 23).
Keep these time changes in mind when pro gram ming the unit for timer
recording.
Spring (First Sunday in April)
DST: ON Sets clock ahead one hour.
Autumn (Last Sunday in October)
DST: ON Turns clock back one hour.
The producer of the material can control how DVD-Video and Video CDs
are played. This means that you may not be able to control play of a disc
with some operations described in these operating instructions. Read the
disc’s instructions carefully.
This unit can play CD-R/CD-RW (audio recording disc) recorded with
CD-DA (digital audio), video CD (video CD format 2.0 or above) or MP3.
Finalize* the disc after recording.
* A process that allows play on compatible equipment.
This unit cannot record onto CD-R or CD-RW.
Disc type Disc Logo Instructions
Indication in
these operating
instructions
DVD-Audio
High fidelity music discs
Played on this unit in
2 channels.
DVD-A
DVD-Video
High quality movie and
music discs
DVD-V
Video-CD
Music and video
recorded (including
CD-R/RW)
VCD
Audio-CD
Music and audio
recorded (including
CD-R/RW)
CD-R and CD-RW with
music recorded in MP3
(p. 47)
CD
(CD-DA)
or
MP3
(MP3)
Dolby Digital:
This unit can play Dolby Digital in stereo (2 channels).
Connect an amplifier with a built-in Dolby Digital
decoder to enjoy surround sound.
DTS Digital Surround:
Connect this unit to equipment that has a DTS decoder
to enjoy DVDs with this mark.
1 Open the cover.
3 Close the cover.
Slide in direction of “ ” mark until cover
snaps shut.
2 Insert batteries as marked.
Information (Unit) Information (Disc)
9
Getting Started
Discs you can use for recording and play
DVD-R discs
One time recording discs (recordable until the disc is full)
You can record up to 8 hours [in EP (8 H) mode].
By finalizing the disc, you can play it in a DVD player as DVD-Video
(Play only) (pp. 62, 70).
You cannot record digital broadcasts that allow “One time only recording”.
This unit is compatible with 1×-4× recording speed discs.
Disc type Disc Logo
Indication in these operating
instructions
DVD-R
DVD-R
DVD-RAM
RAM
DVD-RAM discs
Re-writable discs
You can record up to 16 hours [in EP (8 H) mode on double-sided disc.
You cannot record or play continuously on two sides]. (Refer to “Recording
modes and approximate recording times” on page 39.)
You can perform chasing playback (p. 42).
Scratch and dust resistant cartridge discs and large capacity double sided
discs (9.4 GB) are commercially available.
You can record digital broadcasts that allow “One time only recording”
when using CPRM (Content Protection for Recordable Media) compatible
discs (p. 70).
Capacity
12 cm (5) 9.4 GB (double-sided) and 4.7 GB (single-sided)
8 cm (3) 2.8 GB (double-sided)
Notes:
We recommend using Panasonic discs. DVD-R from other manufacturers
may not be recorded or played due to the condition of the recording.
This unit cannot record to discs containing both PAL and NTSC signals.
Play of discs recorded with both PAL and NTSC on another unit is not
guaranteed.
Some parts of the disc, for example where one program ends and another
begins, may not play smoothly.
Protection (Cartridge discs)
With the write-protect tab in the protect position, you cannot
record to, edit, or erase from the disc.
Play automatically starts when inserted in the
unit.
Capacity
12 cm (5) 4.7 GB, 8 cm (3) 1.4 GB for General Ver. 2.0
4.7 GB, 12 cm (5) for General Ver. 2.0 / 4× - SPEED
DVD-R Revision 1.0
4#%4/20
Discs or Card you can use
* Possible operations (: enable, × : unable)
Type
Possible operations*
A
B
C
D
E
DVD-RAM
RAM
○○○○○
DVD-R
Before
Finalizing
DVD-R
○○** ××
After
Finalizing
DVD-V
× ×××
DVD-Audio
DVD-A
× ××
DVD-Video
DVD-V
× ××
Audio-CD
CD-DA
Format
CD
× ×××
MP3
Format
MP3
× ×××
Video-CD
VCD
× ××
Card
SD
× ○○*** ××
A
:
Recording
B
:
Playback
C
:
Title erase/Entering text
D
:
Creating play lists
E
:
Selecting audio
** The remaining capacity of the disc will not be increased even if erased.
*** Only titles in folders can be input.
10
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Disc Handling
The following chart indicates the differences. Select based upon
what you require.
DVD-RAM DVD-R
Re-writable YES NO
Edit YES YES
*1
Play on other players YES
*2
YES
*3
Recording both Main and SAP of
MTS broadcast
YES
*4
NO
*4
Recording broadcasts that allow
one copy
YES
*5
NO
Recording 16:9 aspect picture YES YES
*6
*1
You can erase, enter name and change thumbnail. Available space does
not increase after erasing.
*2
Only on DVD-RAM compatible players.
*3
After finalizing the disc (pp. 62, 70).
*4
Only one is recorded (“Select MTS” on page 69).
*5
CPRM (p. 70) compatible discs only.
*6
The picture is recorded in 4:3 aspect.
Which should I use, DVD-RAM or DVD-R?
The region number of this player is “1”.
The player will play DVD-Video marked with labels bearing “1” or “ALL”.
For U.S.A. and Canada
Example:
!,,
This unit is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the
Region number described on the DVD disc does not correspond to
the Region number of this unit, this unit cannot play this disc.
Region Management Information
Disc Composition Examples
Disc Type Disc Composition
DVD-
RAM
RAM
Title
(Program)
Title 1
(Program 1)
Title 2
(Program 2)
Title 3
(Program 3)
Title 4
(Program 4)
Title 5
(Program 5)
Play List Chapter 1
(Scene 1)
Chapter 2
(Scene 2)
Chapter 3
(Scene 3)
Chapter 4
(Scene 4)
Chapter 5
(Scene 5)
DVD-R
Before
Finalizing
DVD-R
Title
(Program)
Title 1
(Program 1)
Title 2
(Program 2)
Title 3
(Program 3)
Title 4
(Program 4)
Title 5
(Program 5)
After
Finalizing
DVD-V
Title Title 1 Title 2
Chapter Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
DVD-
Audio
DVD-A
Group Group 1 Group 2
Track Track 1 Track 2 Track 3 Track 1 Track 2
DVD-
Video
DVD-V
Title Title 1 Title 2
Chapter Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Audio-
CD
CD-DA
Format
CD
Track Track 1 Track 2 Track 3 Track 4 Track 5
MP3
Format
MP3
Group Group 1 Group 2
Track 1 2 3 1 2 3
Total
Track
123456
Video-
CD
VCD
Track Track 1 Track 2 Track 3 Track 4 Track 5
Handling precautions
• Do not attach labels or stickers to discs. (This may cause disc
warping and un-balanced rotation, rendering it unusable.)
• Do not write on the label side with a ball-point pen or other
writing instrument.
• Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
• Do not use scratch-proof protectors or covers.
• Do not use the following discs:
- Disc with exposed adhesive from removed stickers or labels
(rented discs, etc.).
- Discs that are badly warped or cracked.
- Irregularly shaped discs, such as heart shapes.
How to hold a disc
Do not touch the recorded surface.
If there is dirt or condensation on the disc
RAM
DVD-R
• Clean with an optional DVD-RAM/PD Disc cleaner
(LF-K200DCA1, where available).
• Do not use cleaners for CDs or cloths.
DVD-A
DVD-V
VCD
CD
Wipe with a damp cloth and then wipe dry.
• Do not place in the following areas:
- In direct sunlight.
- In very dusty or humid areas.
- Near a heater.
Note:
You can create chapters for your recorded title/
program. And, you can arrange created chapters
into a desired scene list (Play List).
11
Getting Started
Use a genuine SD Memory Card or MultiMediaCard.
(We recommended using a Panasonic SD card.)
You cannot use SD cards that exceed 2 GB.
Compatible with: FAT 12 or FAT 16
Use this unit to format a memory card when using for the first time (p. 61).
Note that the memory card may no longer be usable on other equipment
once formatted on this unit.
This unit operates in accordance with the DPOF (Digital Print Order
Format) (p. 56). (Card only)
Only use the memory cards recommended above.
SD Memory Card Write Protection
You can protect valuable images, etc. from
accidental erasure.
1
Move switch to LOCK : erase/edit not possible.
2
Move switch back : erase/edit possible.
Cards capable of displaying and saving
Card type Card Logo
Indication in these
operating instructions
SD Memory Card
SD
MultiMediaCard
Still Pictures
The unit can play DCF* compliant JPEG and TIFF files taken on a digital
camera.
* Design rule for Camera File system: unified standard established by Japan
Electronics and Information Technology Industries Association (JEITA).
• Picture definition:
Compatible in the range 34 × 34 – 6 144 × 4 096 (sub sampling is 4:2:2 or
4:2:0)
This unit can handle a maximum of 300 folders (including header
folders) and 3 000 files. Files and folders with numbers which exceed the
maximum cannot be displayed, copied or erased.
Audio, video and still pictures (MOTION JPEG etc.) that are not compliant
with the DCF standard and still pictures other than JPEG and TIFF cannot
be displayed.
Still pictures created or edited on a computer may not be playable.
TIFF is compatible with uncompressed RGB chunky formats. Other types
of TIFF files cannot be played.
When playing TIFF files, it may take time for them to be displayed.
When there are a lot of folders and files, it may take a long time to display,
copy or erase.
Folder titles that were input on equipment other than this unit may not be
displayed properly.
Still picture folder structure
The following can be displayed on this unit.
*
*
* Folders can be created on other equipment. However, these folders
cannot be selected as a transferring (dubbing) destination.
The folder cannot be displayed if the numbers are all “0” (e.g., DCIM000
etc).
If a folder name or filename has been input using other equipment, the
name may not be displayed properly or you may not be able to play or edit
the data.
Card Handling
Do not touch terminal side of card.
1
2
Notes:
JPEG and TIFF files on a CD-R/CD-RW cannot be played back.
JPEG and TIFF files on a DVD-RAM can played back.
Naming folders and files
MP3 files must have the extension
“.MP3” or “.mp3”.
At the time of recording, give folder
and file names a 3-digit numeric
prefix in the order you want them to
play (this may not work at times).
English alphabets and Arabic
numerals are displayed correctly.
Other characters may not be
displayed correctly.
Information (MP3)
Tips for making MP3 discs
Discs must conform to ISO9660 level 1 or 2 (except for extended formats).
Compatible compression rate:
between 32 kbps and 320 kbps
Compatible sampling rate:
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz and 48 kHz
Maximum number of tracks and groups recognizable: 999 tracks and
99 groups
This unit is compatible with multi-session.
This unit is not compatible with ID3 tags or packet writing.
Depending on the recording, some items may not be playable.
Reading or play of the disc may take time if there are a lot of still pictures
or sessions.
The display order may differ from how the order is displayed on a
computer.
002 group
001
001
001track.mp3
002track.mp3
003track.mp3
003 group
001track.mp3
002track.mp3
003track.mp3
001track.mp3
002track.mp3
003track.mp3
004track.mp3
Root
Order of play
(folder=group)
(file=track)
Note:
MP3 recordings on a DVD-RAM or DVD-R cannot be played back.
Information (Card)
12
Location of Controls
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Remote Control Buttons
1
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
31
33
34
35
36
37
38
39
5
No. Part Name Description Page
1
INPUT Changes input mode. 25
2
POWER Turns power on and off. 21
3
OPEN/CLOSE Opens/closes disc tray. 34
4
NUMBER keys Directly inputs numerical data. 25
5
R-TUNE
Displays the last channel you were
watching.
25
6
CANCEL
ADD/DLT
Cancels input data.
Adds/deletes channels in unit
memory.
63
22
7
SKIP Ι◄◄ /►►Ι
Skips to previous/next chapter or
track.
45
8
STOP
Stops playback, cancels resume,
and stops recording.
38, 44
9
PAUSE Pauses playback/recording. 38, 44
10
DIRECT
NAVIGATOR
Displays Direct Navigator
when playing a DVD-RAM and
non-finalized DVD-R. Displays Disc
Menu when playing a DVD Video
and finalized DVD-R.
45, 51, 54
No. Part Name Description Page
11
▲▼◄►
Use to move cursor for item
selection in menu and operation
screens.
During a paused picture, ◄ΙΙ / ΙΙ►
operates Frame Advance.
22
46
12
SUB MENU
Displays sub menu while using
Direct Navigator or Play list for
editing.
51, 56, 58
13
DVD SETUP Use to perform initial DVD setup. 67
14
PROG/CHECK
Use when programming a timer
recording and when displaying timer
recording information.
41
15
VCR Plus+
Makes setting timer recordings
quick and easy.
40, 41
16
ERASE Erases recording content. 47
17
AUDIO Switches the Audio mode. 27, 48
18
PICTURE MODE
Changes picture adjust mode.
(STANDARD, CINEMA, VIVID)
32
19
ASPECT Changes display aspect ratio. 26
20
CHAPTER Records the playback position. 48
21
DRIVE SELECT-
DVD
Selects DVD drive. 34
22
DRIVE SELECT-
SD
Selects SD (card) drive. 34
23
MUTE Places unit in Mute mode. 26
24
SLEEP Sets the sleep timer. 25
25
CH ▲▼ Changes channels. 25, 38
26
VOL +/- Adjusts volume. 25
27
SLOW/SEARCH
◄◄ /►►
Searches for previous/next scene.
Pressing during pause mode starts
slow motion playback. Pressing
◄◄ or ►► to change slow motion
direction.
45, 46
28
PLAY/×1.3
Begins playback. Holding down for
1 second switches to fast playback.
44
29
MENU Displays TV menu. 22
30
ENTER Uses when finalizing menu entries. 22
31
RETURN
Uses when returning to the normal
screen from a menu.
Uses when returning to the previous
screen during setup.
22
32
TIME SLIP
Skips over a specified time on the
disc.
42, 46
33
CM SKIP
During playback, skips ahead
1 minute.
45
34
REC Begins recording. 38
35
REC MODE Sets to DVD Record mode. 38
36
F REC Sets Flexible Recording. 39
37
AUDIO MODE
Changes audio adjust mode.
(AUTO, STANDARD, DYNAMIC)
31
38
DISPLAY Displays operation status. 27, 35, 54
39
PLAY SETUP
Changes the initial playback settings
during play.
49
32
30
13
Getting Started
Unit Buttons
Front View
45
No. Part Name Description Page
1
Remote Sensor
Receives infrared signal from
Remote Control.
2
POWER Indicator
Lights when power is on.
Standby: Red
On: Green
3
Built-in Speaker Equipped with a front speaker.
4
Disc Tray Place compatible discs here. 34
5
SD Card Slot Place compatible cards here. 34
6
DVD Indicator Lights when in DVD mode. 34
7
SD Indicator Lights when in SD mode. 34
8
SD Indicator
On: When a card is set in this unit.
Flashes: When a card is being
read or written.
34
9
Timer Recording
display
On: When timer recording is on
standby.
Flashes: When the unit couldn’t go
to timer recording standby.
40, 41
10
Disc Type* Displays Disc media being used.
11
TIME SLIP
Indicator
Lights when simultaneously
playing and recording a DVD.
42
12
Recording mode
Recording Mode Displays Disc of
recording.
(When FR is selected all lights go
out.)
39
No. Part Name Description Page
13
Channel
Displays channel.
Displays title number during
playback.
38
14
Main display
section
Recording and play counter, and
other miscellaneous messages.
38, 44
15
Disc operation
status
Displays condition of playback/
recording.
38, 44
16
POWER Turn the unit on or off. 21
17
INPUT Changes Input position. 25
18
VOLUME +/- Adjusts volume. 25
19
CHANNEL ▲▼ Changes channels. 25, 38
20
OPEN/CLOSE Opens/closes disc tray. 34
21
DRIVE SELECT
DVD/SD
Select the drive. 34
22
PLAY/×1.3
Begins playback. Holding down
for 1 second switches to fast
playback.
44
23
REC Begins recording. 38
24
SKIP Ι◄◄ /►►Ι
Skips to previous/next chapter or
track.
45
25
STOP
Stops playback, cancels resume,
and stops recording.
38, 44
Top View
* D. MIX (Multi-channel DVD-Audio only)
On: Down-mixed audio is played. (p. 70)
Off: The disc prevents down-mixing so only the two front channel can be played.
20 21
22
23
24
25
16 17 18 19
1
2
6 7 8 9 10 11
14 15
1312
3
14
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Rear View
Left Side View
VIDEO S VIDEO
Y
COMPONENT VIDEO INPUT
AUDIO
IN
OUT
VIDEO
RL
AUDIO
RL
DIGITAL AUDIO OUT
PCM/BITSTREAM
OPTICAL
1
2
3
4
8
No. Part Name Description Page
1
Component signal
Input connector
Input the Component signal (Y,
PB, PR) from other equipment.
16
2
Video Input 1, 2
connector
Connect from other equipment. 16
3
Audio Out
connector
Outputs audio signal. (Analog) 19
4
Optical digital
Audio Out
connector
Outputs audio signal. (Digital) 18
5
VHF/UHF Antenna
Input terminal
Input terminal for an antenna or
cable box signal.
15
No. Part Name Description Page
6
HDMI Input
terminal
Connect the HDMI cable.
(For analog, also connect the
audio cables.)
17
7
AC Power Plug
When plugged into an AC outlet,
this unit consumes 0.8 W of
electric power in OFF condition.
8
Phones Jack (M3) Connect a Headphones. 20
!
6).
0
%
4
4
"
-
5
56 7
15
Getting Started
Connections
Notes on connections
Turn off the power supply for all components before making any connections.
If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to
fashion a cable to suit the component concerned.
Read the instruction manual for each system component carefully before connecting it.
Connect the cable from Antenna to the VHF/UHF terminal on the
unit.
Cable Connection
Overtightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only.
Connecting the RF in Terminal
Note to CABLE system installer:
This re mind er is pro vid ed to call the CABLE (Cable TV) System
Installer’s at ten tion to Article 820-40 of the NEC that pro vides
guide lines for proper grounding and, in par tic u lar, specifies that
the cable ground shall be con nect ed to the ground ing system of
the build ing, as close to the point of cable entry as practical.
Cable Box
In from CABLE
VHF
Antenna
UHF
Antenna
CAUTION
Or
Mixer
Antenna Connection
Connect the cable supplied by your local cable company to VHF/
UHF terminal on the unit.
Note:
When the RF coaxial cable is connected to the projection display VHF/
UHF terminal via a cable box or VCR, set the TV channel to CH3 or CH4.
This does not apply when signal is input from VIDEO INPUT.
Use this configuration when connecting the LCD TV Antenna and
Cable TV system using VCR.
Or
Connect the cable from the Output
terminal on the back of the Cable
Box or antenna/cable system to the
Antenna input terminal on the back
of the VCR.
VCR
Incoming Cable from
Antenna or Cable TV System
TO VCR
In from cable
TERMINAL ON THE
BACK OF THE CABLE
BOX
CABLE BOX
TO VCR
Connecting the Antenna / Cable to the RF IN
Terminal (VCR)
Cable / Antenna Connection
Incoming 75 Cable from
Home Antenna / Cable
Company
F-Type Antenna
Connector
Antenna
Terminal on the
Back of the TV
16
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
VIDEO S VIDEO
IN
AUDIO
R
L
VIDEO S VIDEO
IN
AUDIO
R
L
Notes:
When connecting video cables, priority is given to the S-Video cable when both the S-VIDEO input terminal and the VIDEO input terminal are connected.
Please make inquiries to video game manufacturers concerning component cables to connect with video game console.
Select the desired VIDEO input position by pressing the INPUT button. (p. 25)
Connecting the “1, 2” AV Input Terminals
Connects VCRs and other peripheral equipment
*
VIDEO
AUDIO
S-VIDEO
VHS VCR
S-VHS VCR
AUDIO
* Similar connections are available at the INPUT 1, 2 input terminals.
Y
COMPONENT VIDEO INPUT
AUDIO
VIDEO
R
L
Notes:
Select the desired COMPONENT VIDEO INPUT position by pressing the
INPUT button. (p. 25)
Component video signals that can be input are 480i, 480p, 720p, and
1 080i.
You cannot record the programs using this connection.
Because each Y, PB, and PR signal is input independently, the Component signal allows for more accurate color reproduction.
The Component signal output terminal indication will differ according to the output device (Y, P
B, PR).
Please read the operating instructions included with the output device.
DVD Player
COMPONENT VIDEO
AUDIO
Mode type
Signal data
Information
menu
display
No. of dots
(H × V)
Horizontal
frequency
(kHz)
Vertical
frequency
(Hz)
DTV Format
Signals
480i 664 × 485 15.73 29.97 480 i
480p 720 × 483 31.47 59.94 480 p
*720p 1 280 × 720 45.00 60.00 720 p
1 080i 1 920 × 1 080 33.75 30.00 1 080 i
Component Signals (Y, PB, PR) that can be Input
Input signals, other than those listed with a * mark, will give you a
beautiful, stable picture.
Connecting the COMPONENT VIDEO Input Terminals
*
17
Getting Started
!
6)
.
0
%
4
4
"
-
5

Ferrite core (small size)
(not supplied)
HDMI Connection
HDMI
*1
(High Definition Multimedia Interface) is the first all digital consumer electronics A/V interface that supports uncompressed standard.
The HDMI terminal supports both video and audio information.
You can connect an EIA / CEA-861 / 861B
*2
compliant consumer electronic device, such as a Set Top Box or DVD player with HDMI or DVI
output terminal to the HDMI
*1
input terminal.
Input a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to this HDMI terminal, so you can display high-
definition pictures on this TV in the digital form.
Attach just beside the
connector.
Audio cable
(not supplied)
HDMI cable
(not supplied)
The connector on the unit is HDMI Type A
connector.
AUDIO IN
R
L
The connector on the unit is HDMI Type A
connector.
Follow the diagram below to connect the unit to a set top box or a
DVD player.
Set Top Box
Set Top Box
When audio signal input is digital
When audio signal input is analog
Notes:
If the external device has DVI output only, use a DVI to HDMI adapter
cable
*3
to connect to the HDMI terminal.
Connect the audio cables to the AUDIO IN terminals for HDMI.
Select the audio setting in HDMI IN. (p. 32)
You cannot record the programs using this connection.
Compatible VIDEO Signal
This input terminal is not intended for use with computers.
Compatible sampling frequency of AUDIO signal
(L.PCM) : 48 kHz / 44.1 kHz / 32 kHz
Notes:
This HDMI connector is Type A.
If you connect an equipment without a digital output terminal, connect to
the COMPONENT VIDEO, S-VIDEO or VIDEO input terminal on the TV so
you can enjoy an analog signal.
No. of dots (H × V) Vertical scanning frequency (Hz)
1080i 1 920 × 1 080i 59.94 / 60
720p 1 280 × 720p 59.94 / 60
480p
720 × 480p
640 × 480p
59.94 / 60
59.94 / 60
480i 720 (1 440) × 480i 59.94 / 60
*1
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
*2
EIA / CEA-861 / 861B profiles compliance covers profiles for
transmission of uncompressed digital video including high
bandwidth digital content protection.
*3
HDMI-DVI conversion cable (TY-SCHO3DH): available on
Panasonic website (www.panasonic.com). Consult your
consumer electronics dealer for availability details.
Connection diagram
18
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an amplifier and
speakers. There are two types of connection, digital and analog.
Connect an AV amplifier with Dolby Digital or
DTS decoders
Digital connection
Connecting the Audio Output Terminal
Please see amplifier
manual for speaker
requirements.
Speakers (example)
Amplifier with built in Dolby Digital
or DTS decoders.
Firmly connect the cable to
the connector.
OPTICAL
OPTICAL
Connect a Digital amplifier
Enjoy “Dolby Digital” or “DTS” surround sound.
Smart one-line connection is possible.
Note:
It is outputted in DVD playback only.
19
Getting Started
Connect an analog amplifier to enjoy high-quality stereo sound.
Analog connection
IMPORTANT NOTE:
Caution for optical digital audio output connector:
Be sure to refer to pages 67~69 regarding output settings of Dolby Digital,
dts, and PCM.
CDs can be played as usual.
Audio from the Digital Audio Out terminal is only output during playback.
When connecting an amplifier which contains the Dolby Digital or dts
decoder, be sure to select “Bitstream”. When connecting an amplifier
which does not contain the Dolby Digital or dts decoder, be sure to select
“PCM”. (pp. 67~69) Otherwise, attempting to play a DVD may cause such
a high level of noise that it may harm your hearing and damage your
speakers.
Notes:
Some dts decoders which do not support DVD-dts Interface may not work
properly with the unit.
Avoid bending/ twisting the optical digital cable when connecting.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No’s. 5,451,942, 5,956,674, 5,974,380, 5,978,762,
6,487,535 and other U.S. and world-wide patents issued and
pending. “DTS” and “DTS 2.0 + Digital Out” are trademarks
of Digital Theater Systems, Inc. Copyright 1996, 2003 Digital
Theater Systems, Inc. All Rights Reserved.
For your reference:
Dolby Digital is a digital sound compression technique developed by
the Dolby Laboratories Licensing Corporation. Supporting 5.1-channel
surround sound, as well as stereo (2-channel) sound, this technique
enables a large quantity of sound data to be efficiently recorded on a disc.
LPCM is a signal recording format used in CDs. While CDs are recorded in
44.1 kHz/16 bit, DVDs are recorded in 48 kHz/16 bit up to 96 kHz/24 bit.
If you have a Dolby Pro Logic Surround decoder, you will obtain the
full benefit of Pro Logic from the same DVD movies that provide full
5.1 channel Dolby Digital soundtracks, as well as from titles with the Dolby
Surround mark. For information on Panasonic or Technics Dolby Pro Logic
Surround Sound Decoders please contact your local dealer.
AUDIO
R
L
OUT
20
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
M3 plug
Connecting the Headphones / Earphones Jack
Left side of the TV
(Not supplied)
21
TV Operation
Top view
Initial Setup (Ready to Play)
After plugging the unit into your household AC outlet and pressing
POWER to turn the unit on for the first time, the unit assists you
to set the on-screen language, and automatically tunes in all the
channels it can receive and sets the clock.
The unit automatically determines the type of transmission
(airwaves or cable) and puts them into channels as follows.
Preparation
Turn on the television and select the appropriate video input to suit the
connections to this unit.
Confirm that the antenna is connected correctly.
1 Press POWER.
For remote POWER button
to function, unit POWER
must be ON.
2 Press ▲▼ to select
the language and
press ENTER.
The unit then proceeds with Auto Clock Setting. The time is
displayed when finished.
If “No Channels found...” is displayed, press ENTER again.
DST, Daylight Saving Time, shows the summertime setting.
TIME ZONE shows the time difference from Greenwich meantime
(GMT).
EST (Eastern Standard Time) = GMT –5
CST (Central Standard Time) = GMT –6
MST (Mountain Standard Time) = GMT –7
PST (Pacific Standard Time) = GMT –8
AST (Alaska Standard Time) = GMT –9
HST (Hawaii Standard Time) = GMT –10
For other areas: xx hr
5 Press ENTER.
If the clock is an hour slower or faster than the
actual time
Select “–1” or “+1” in “Time Zone Adjust” in the SETUP menu.
(p. 23)
If the unit couldn’t set the clock automatically
Set the time manually. (Refer to “Manual Clock Setting” on page
23.)
To start Auto Channel Setting again (after
relocation, for example)
Reset the unit. (Refer to “Reset all unit Memory Functions” on
page 24.)
Antenna system and VCR Plus+ guide channel settings all
revert to the default values.
Band Channel
TV Mode
(Airwaves)
VHF 2-13
UHF 14-69
CATV Mode
(Cable)
VHF 2-13
CATV LOW BAND 95-99
CATV MID/SUPER BAND 14-36
CATV HYPER BAND 37-65
ULTRA BAND
66-94
100-125
SPECIAL CATV CHANNEL 1
English
Espa
ñol
Fran
çais
Select Language
Seleccione la Lengua
S
élection de Langue
Press ENTER
Pulse ENTER
Appuyer sur ENTER
4 Press ENTER to start
Auto Channel Setting.
AUTO CH SETTING
In “AUTO CH SETTING”
CHANNEL 35
MENU
STOP
Auto Clock Setting
4/4/2004 12:15 AM
DST---------------ON
TIME ZONE----EST
Auto Clock Setting is complete.
POWER
CH ▲▼
ENTER
▲▼
POWER
Initial Setup –Ready to Play–
3 Press ENTER.
Auto Channel Setting
Please press the ENTER key.
Connect antenna cable and if you use a
cable box tune it to your local PBS CH
then...
22
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Top view
Automatic Channel Setting
1 Press MENU.
2 Press ◄► to select “SET UP.”
3 Press ▲▼ to select “PROGRAM CH” and press
ENTER.
MENU
ADJ. SET UP FUNC.
LANGUAGE
PROGRAM CH
CLOCK
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
OK
PAGE
RETURN
SELECT
4 Press ▲▼ to select “Antenna System” and press
ENTER.
To exit the screen
Press RETURN.
Adding and deleting channels
Add or delete channels if necessary channels are not set or
unnecessary channels are set.
5 Press ▲▼ to select “TV” or “CATV” and press
ENTER.
PROGRAM
CHANNEL
Antenna System CATV
Auto Channel Setting
VCR Plus+ CH Setting
PROGRAM
CHANNEL
Antenna System
TV
CATV
6 Press ▲▼ to select “Auto Channel Setting” and
press ENTER.
PROGRAM
CHANNEL
Antenna System CATV
Auto Channel Setting
VCR Plus+ CH Setting
7 Press ENTER.
Auto Channel Setting starts. This takes a few minutes.
• Channels will automatically advance until all channels have been
scanned. Channel numbers with video signal received will be stored
in the Channel Memory.
8 Press ENTER.
1 Press NUMBER keys to select a channel.
e.g., 5: [0] [5]
15: [1] [5]
115: [1] [1] [5]
You also use CH ▲▼ when you are going to delete a channel.
2 Press ADD/DLT.
NUMBER keys
ADD/DLT
▲▼◄►
RETURN
ENTER
MENU
Notes:
• After Auto Channel Setting finishes, the lowest channel number added will
be displayed.
• When there are no receivable channels, channel 69 (for TV) or channel
125 (for cable TV) is displayed.
CH ▲▼
Tuning TV
VOL-
CHANNEL 12 ADDED
CHANNEL 12 DELETED
23
TV Operation
Clock Settings
1 Press MENU.
2 Press ◄► to select “SET UP.”
3 Press ▲▼ to select “CLOCK” and press ENTER.
MENU
ADJ. SET UP FUNC.
LANGUAGE
PROGRAM CH
CLOCK
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
OK
PAGE
RETURN
SELECT
4 Press ▲▼ to select “Auto Clock Setting” and press
ENTER.
DST, Daylight Saving Time, shows the summertime setting.
TIME ZONE shows the time difference from Greenwich meantime
(GMT).
EST (Eastern Standard Time) = GMT –5
CST (Central Standard Time) = GMT –6
MST (Mountain Standard Time) = GMT –7
PST (Pacific Standard Time) = GMT –8
AST (Alaska Standard Time) = GMT –9
HST (Hawaii Standard Time) = GMT –10
For other areas: xx hr
6 Press ENTER.
To cancel partway
Press RETURN.
Adjust the time zone (-1 or +1) if it was not set correctly with auto
clock setting.
4 Press ▲▼ to select “Time Zone Adjust” and press
ENTER.
4 Press ▲▼ to select “Manual Clock Setting” and
press ENTER.
5 Press ◄► to select the item you want to change
and press ▲▼ to change the setting.
DST (Daylight Saving Time): ON or OFF
If you select “ON”, the clock is advanced one hour starting at 2 a.m.
on the first Sunday in April and ending at 2 a.m. on the last Sunday
in October.
Time Zone (see above)
To return to the previous screen
Press RETURN.
Auto Clock Setting
Time Zone Adjust
Manual Clock Setting
5 Press ▲▼ to select “-1” or “+1” and press ENTER.
CLOCK
Auto Clock Setting
0
Manual Clock Setting
Time Zone Adjust
5 Press ENTER.
Auto Setting starts. This can take some time, up to a few hours in
some cases. The following screen appears when setting is complete.
Auto Clock Setting
4/4/2004 12:15 AM
DST---------------ON
TIME ZONE----EST
Auto Clock Setting is complete.
CLOCK
CLOCK
Auto Clock Setting
0
Manual Clock Setting
Time Zone Adjust
Time Zone Adjust
CLOCK
-1
0
+1
CLOCK
Auto Clock Setting
0
Manual Clock Setting
Time Zone Adjust
6 Press ENTER.
The clock starts.
Manual Clock Setting
CLOCK
1 // THU
MONTH DAY YEAR HOUR MINUTE
:PM12 001 2004
DST TIME ZONE
OFF EST
24
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Reset all unit Memory Func tions
Returns to factory setting. Use if relocating unit, or if Initial Setup
needs to be redone.
• Make sure a disc is not inserted in unit.
1 Turn the unit Power on.
2 Press MENU.
3 Press ◄► to select “SET UP.”
4 Press ▲▼ to select “LOCK” and press ENTER.
5 Hold down both MUTE on the Remote Control and
VOL- on the unit.
• The power will shut off.
6 Perform “Initial Setup” on page 21.
To exit the screen
Press RETURN.
VCR Plus+ guide channel Settings
Set these guide channels so you can use the VCR Plus+
programming number for timer recording. Before starting the
settings, prepare a chart showing the channels, station names, and
guide channels.
Station name
Guide
channel
Channel
number
Channel setting
CBS 04 04 Unnecessary
HBO 33 15
Enter channel 15 next to
Guide Channel 33.
Nickelodeon 38 20
Enter channel 20 next to
Guide Channel 38.
e.g.,
Look up the guide channels for the
stations in magazines.
Write down all the stations you can
receive.
Note:
If you have connected a cable TV box or satellite receiver, the VCR Plus+
system does not work so you do not have to set the guide channels.
1 Press MENU.
2 Press ◄► to select “SET UP.”
3 Press ▲▼ to select “PROGRAM CH” and press
ENTER.
MENU
ADJ. SET UP FUNC.
LANGUAGE
PROGRAM CH
CLOCK
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
OK
PAGE
RETURN
SELECT
4 Press ▲▼ to select “VCR PLUS+ CH Setting” and
press ENTER.
5 Press ▲▼ to select the guide channel you want to
set and press .
When selecting the guide channel, press and hold ▲▼ to scroll the
screen up and down.
PROGRAM
CHANNEL
Antenna System CATV
Auto Channel Setting
VCR Plus+ CH Setting
PROGRAM
CHANNEL
VCR Plus+ CH Setting
Guide Channel CATV Channel
125
1
2
3
- - -
- - -
- - -
- - -
6 Press ▲▼ to select the channel corresponding to
the guide channel and press .
To delete a number, press CANCEL.
Repeat steps 5 and 6 to enter other channels.
7 Press ENTER.
PROGRAM
CHANNEL
VCR Plus+ CH Setting
Guide Channel CATV Channel
4
5
6
7
8
- - -
- - -
- - -
- - -
- - -
Change Language Setting
1 Press MENU.
2 Press ◄► to select “SET UP.”
3 Press ▲▼ to select “LANGUAGE” and press
ENTER.
MENU
ADJ. SET UP FUNC.
LANGUAGE
PROGRAM CH
CLOCK
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
OK
PAGE
RETURN
SELECT
LANGUAGE
LANGUAGE ENGLISH
CHANGE
RETURN
4 Press ◄► to select Language.
5 Press RETURN twice to exit.
Preparation
Complete Auto Channel Setting. (pp. 21, 22)
25
TV Operation
Top view
Select desired channel:
Press CH ▲▼ or NUMBER keys.
Adjust desired volume level:
Press VOL + or VOL –.
Selecting Input Mode
Using the CH/VOL Button
TUNER:
Signal of source connected to VHF/UHF terminal is displayed.
VIDEO 1:
Signal of source connected to AV Input terminal 1 is displayed.
VIDEO 2:
Signal of source connected to AV Input terminal 2 is displayed.
COMPONENT:
Signal of source connected to COMPONENT Input terminal is
displayed.
HDMI:
Signal of source connected to HDMI Input terminal is displayed.
When selecting CABLE channels 100 to 125 with the NUMBER
keys.
1 Press R-TUNE to display the last channel you were
watching.
Example 1:
To select channel 125, first press the 1 key, then 2, then 5.
Example 2:
To select channel 12, first press the 1 key, then 2.
Example 3:
To select channel 2, first press the 0 key, then 2.
Rapid Tune
VIDEO1*
COMPONENT*
VIDEO2*
HDMI*
TUNER*
Using the NUMBER keys
This unit can be set for auto power off.
1 Press SLEEP repeatedly to select the desired time.
To cancel, press SLEEP repeatedly until “0” appears.
2 The indication goes off a few seconds after the
adjustment is finished.
Pressing DISPLAY with sleep timer set displays remaining time.
From 3 minutes prior to power off, 3, then 2, then 1 flashes
on-screen.
Sleep Timer
30 60
0 90
90
INPUT
NUMBER keys
▲▼◄►
AUDIO
ASPECT
DISPLAY
ENTER
MENU
R-TUNE
VOL +/-
CH ▲▼
MUTE
SLEEP
* If SKIP is set as the INPUT LABEL setting, the mode will not be changed.
(p. 28)
1 Press INPUT.
The display will change as follows.
TV Operation
INPUT
VOL +/-
Method 1
1 Press CH ▲▼.
The display will change as follows.
Notes:
The diagram at right is an example.
TV CH 2 and CABLE CH 1 represent the
lowest channels in memory, while TV CH
69 and CABLE CH 125 represent the
highest channels in memory.
(TV)
CH69
(CABLE)
CH125
(TV)
CH2
(CABLE)
CH1
VIDEO1*
COMPONENT*
VIDEO2*
HDMI*
* If SKIP is set as the INPUT LABEL setting,
the mode will not be changed. (p. 28)
Method 2
CHANNEL ▲▼
26
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
ASPECT Controls
NORMALFULLZOOMJUST
This feature allows you to enjoy viewing the picture at its maximum
size, including wide screen cinema format picture.
1 Press ASPECT to select the screen mode.
Notes:
However, if the mode selected does not match the aspect ratio of the input
signal, the original picture quality may be affected.
If a normal (4:3) picture is projected in wide screen, distortion may occur
around the edges so that part of the picture may no longer be visible. We
recommend viewing in 4:3 mode so you can enjoy the picture as it was
intended to be seen.
When a 1080i or 720p signal is being received, the mode is set to FULL,
and aspect is not possible.
This feature does not work during SD mode.
The aspect setting is stored separately for TV, VIDEO1, VIDEO2,
COMPONENT, HDMI and DVD/SD.
Mode Picture Explanation
JUST
JUST
4
3
JUST mode will display a 4:3
picture at its maximum size
but with aspect correction
applied to the sides of the
screen so that elongation is
only apparent at the left and
right edges of the screen. The
size of the picture will depend
on the original signal.
ZOOM
ZOOM
4
3
ZOOM mode magnifies the
central section of the picture.
FULL
FULL
4
3
FULL will display the picture
at its maximum size but with
slight elongation.
NORMAL
NORMAL
3
4
NORMAL mode will display a
4:3 picture at its standard 4:3
size without any stretching.
1 Press MUTE to instantly mute the sound. Press
again to restore the previous sound level.
Audio Mute
Position/Size
1 Press MENU.
2 Press ◄► to select “ADJ.”.
MENU
ADJ. SET UP FUNC.
PICTURE
PICTURE ADJUST
POSITION/SIZE
AUDIO
AUDIO ADJUST
OK
PAGE
RETURN
SELECT
3 Press ▲▼ to select “POSITION/SIZE” and press
ENTER.
RETURN
POSITION/SIZE
NORMAL
NORMALIZE
SIZE
1
ZOOM
SIZE:
Press ◄► to shrink the picture vertically [by 15 steps: 15
(original setting) down to 1].
• Press ENTER to return to the original setting.
ZOOM
SIZE:
Press ◄► to select the size.
Size 1: reduces black bar.
Size 2: widens black bar.
• Press ENTER to return to the original position.
POSITION:
Press ▲▼ to move the picture up or down.
• Press ENTER to return to the original position.
Size1
Size2
For “ZOOM” mode (See left)
For “NORMAL” and “JUST" mode (See left)
27
TV Operation
STEREO

SAP MONO
1 Press DISPLAY to display or remove the overlay.
TV Status & Clock Display
JUST 12:34PM CH 12
30
STEREO
SAP
MONO
12
3
4
5
1
Picture (Aspect) Mode
2
Current Time
3
Channel
4
Receivable Broadcast Types (see right)
5
Sleep Timer time remaining
Channel & Aspect Display
When you change channels or picture (aspect) mode, the
channel number or picture mode will be displayed.
The following are possible audio broadcast types and on-screen
displays.
1 Press DISPLAY to display the broadcast signal
being received.
MTS Stereo broadcast:
Multi-channel Television Sound Stereo broadcast. Select
STEREO audio mode.
• If stereo broadcast is weak and the display flickers, select
MONO audio mode for possible improvement.
SAP broadcast:
Secondary Audio Program (sub language).
Select SAP audio mode for the sub language.
MONO broadcast:
Normal monaural sound broadcast.
MTS Stereo and SAP broadcast:
Multi-channel Television Sound Stereo (main language) and
Secondary Audio Program (sub language) broadcasts are being
received simultaneously. Select the STEREO or SAP audio
mode.
1 Press AUDIO to select the desired audio mode as
described above.
Each press of AUDIO will change the audio mode as shown below.
< Example >
Equipped with -TV Noise Reduction for true MTS
reproduction.
-TV Noise Reduction is required for good
stereo separation and audio fidelity.
is a registered
trademark, and is licensed by
Technology Licensing.
Audio Mode for TV Viewing
Receivable Broadcast Types
NORMAL
STEREO

SAP MONO
STEREO

SAP MONO
JUST 12:34PM CH 12
STEREO
SAP
MONO
JUST 12:34PM CH 12
STEREO
SAP
MONO
JUST 12:34PM CH 12
STEREO
SAP
MONO
JUST 12:34PM CH 12
STEREO
SAP
MONO
FULL 12:34PM COMPONENT
28
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Top view
Input Label
MENU
ADJ. SET UP FUNC.
LANGUAGE
PROGRAM CH
CLOCK
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
OK
PAGE
RETURN
SELECT
You can change the video input labels displayed on the screen to
match the connected device (VCR, DVD player etc.).
1 Press MENU.
2 Press ◄► to select “SET UP”.
3 Press ▲▼ to select “INPUT LABEL” and press
ENTER.
4 Press ▲▼ to select the video input, then press ◄►
to select the INPUT LABEL.
(VIDEO1/VIDEO2/COMPONENT/HDMI, VCR, LD, GAME, DVD, DTV,
[BLANK] and SKIP*)
* Select to SKIP unused video input when pressing INPUT button.
In the United States, the V-CHIP consists of two rating systems,
which are MPAA (MOTION PICTURE) and TV PARENTAL
GUIDELINES. Its function is to block programs by the rating data
in the XDS data packets sent from broadcasting stations. The user
can select which rating programs should be blocked by the LOCK
MENU options.
1 Press MENU.
2 Press ◄► to select “SET UP.”
3 Press ▲▼ to select “LOCK” and press ENTER.
MENU
ADJ. SET UP FUNC.
LANGUAGE
PROGRAM CH
CLOCK
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
OK
PAGE
RETURN
SELECT
4 Press NUMBER keys to input 4-digit code.
To clear the numbers while entering the code, press ▲▼.
You will need the code to enter the LOCK menu.
After entering your password for the first time, ENTER CODE FIRST
will change to CHANGE CODE.
RETURN
RETRY
LOCK
BLOCK PROGRAMS:
U.S. MOVIES
STATUS OFF ON
CHANGE SETTING
ENTER CODE FIRST
_ _ _
Notes:
Use a code that is easy to remember and record it in a safe place.
If you forget your secret code, refer to “Reset all unit Memory Functions”
on page 24.
5 Press ▲▼ to select “BLOCK PROGRAMS.”
6 Press ◄► to select “U.S. MOVIES,” “U.S.
TV PROGRAMS,” “CANADIAN ENGLISH,” or
“CANADIAN FRENCH.”
7 Press ▲▼ to select “STATUS” and press ◄► to
select “ON” or “OFF.”
LOCK
BLOCK PROGRAMS:
U.S. TV PROGRAMS
STATUS OFF ON
CHANGE SETTING
CHANGE CODE
_ _ _ _
CHANGE
RETURN
SELECT
LOCK
BLOCK PROGRAMS:
U.S. TV PROGRAMS
STATUS OFF ON
CHANGE SETTING
CHANGE CODE
_ _ _ _
CHANGE
RETURN
SELECT
V-Chip Control Features
▲▼◄►
NUMBER keys
INPUT
MUTE
MENU
ENTER
TV Settings
INPUT
CHANGE
RETURN
SELECT
INPUT LABEL
VIDEO1 VIDEO1
VIDEO2 VIDEO2
COMPONENT COMPONENT
HDMI HDMI
29
TV Operation
8 Press ▲▼ to select “CHANGE SETTING” and press
ENTER to enter the next menu.
LOCK
BLOCK PROGRAMS:
U.S. TV PROGRAMS
STATUS OFF ON
CHANGE SETTING
CHANGE CODE
_ _ _ _
OK
RETURN
SELECT
9 Press ▲▼ to select “VIEW NR PROGRAMS?” and
press ◄► to select “NO” or “YES.”
NO: Cannot view programs with NR signals.
YES: Can view programs with NR signals.
10
Press ▲▼ to select “SETTING” and press ◄► to
select “BASIC” or “DETAILED.”
U.S. TV PROGRAMS
VIEW NR PROGRAMS?
NO YES
SETTING BASIC
TV-Y
TV-Y7 FV
TV-G
TV-PG V S L D
TV-14 V S L D
TV-MA V S L
CHANGE
RETURN
SELECT
U.S. TV PROGRAMS
VIEW NR PROGRAMS?
NO YES
SETTING BASIC
TV-Y
TV-Y7 FV
TV-G
TV-PG V S L D
TV-14 V S L D
TV-MA V S L
CHANGE
RETURN
SELECT
BASIC:
You can select the titles.
DETAILED:
You can select the titles and options.
11
Press ▲▼ to select the rating.
When a title field is selected, all ratings below this rating are
selected.
When options within an option field are selected, ratings below this
rating within the same field are selected.
12
Press ◄► to lock or unlock the rating.
Lock (Red): Cannot view programs with NR signals.
Unlock (Green): Can view programs with NR signals.
U.S. MOVIES RATINGS
G General audience
PG Parental guidance suggested
PG-13 Parental guidance needed under 13 years old
R Restricted
NC-17 No one under 17 is admitted
X Pornography
U.S. TV PROGRAMS only
2. Ratings for teenagers: Created out of these major categories
to form various combinations. These combinations are
described in the below diagram. Ratings for all ages are on top
and ratings for adults are on the bottom.
U.S. TV PROGRAMS RATINGS
1. Ratings for children: Divided into ranks as follows.
TV-Y
TV-Y7 FV TV-Y TV-Y7 TV-Y7-FV
TV-G
TV-PG
V
TV-14
TV-MA
V
V
S
S
S
L
L
L
D
D
Age-based
Group
Age-based
Ratings
Possible Content Selections
NR (Not Rated) TV-NR
• Viewable
• Blocked
Youth
TV-Y
• Viewable
• Blocked
TV-Y7
FV (Fantasy Violence)
• Viewable
• Blocked
Guidance
TV-G
• Viewable
• Blocked
TV-PG
D, L, S, V (all selected)
Any combination of D, L, S, V
TV-14
D, L, S, V (all selected)
Any combination of D, L, S, V
TV-MA
L, S, V (all selected)
Any combination of L, S, V
Chart 1
TV-NR Not Rated.
TV-Y
All Children. The themes and elements in this program are
specifically designed for a very young audience including
children from ages 2-6.
TV-Y7
Directed to older children. Themes and elements in this program
may include mild physical or comedic violence or may frighten
children under the age of 7.
TV-G
General Audience. It contains little or no violence, no strong
language, and little or not sexual dialogue or situations.
TV-PG
Parental guidance suggested. The program nay contain
infrequent coarse language, limited violence, some suggestive
sexual dialogue and situations.
TV-14
Parents strongly cautioned. This program may contain
sophisticated themes, sexual content, strong and explicit sexual
content.
TV-MA
Mature Audiences only. This program may contain mature
themes, profane language, graphic violence and explicit sexual
content.
Chart 2
(Continued on next page.)
30
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
E
Exempt - Exempt programming includes: news, sports,
documentaries and other information programming, talk shows,
music videos, and variety programming.
C
Programming intended for children under age 8. No offensive
language, nudity or sexual content.
C8+
Programming generally considered acceptable for children 8
years and over. No profanity, nudity or sexual content.
G General programming, suitable for all audiences.
PG
Parental Guidance suggested. Some material may not be
suitable for children.
14+
Programming contains themes or content which may not be
suitable for viewers under the age of 14. Parents are strongly
cautioned to exercise discretion in permitting viewing by pre-
teens and early teens.
18+
18+ years old. Programming restricted to adults. Contains
constant violence or scenes of extreme violence.
CANADIAN ENGLISH RATINGS
E Exempt - Exempt programming.
G
General - Programming intended for audience of all ages.
Contains no violence, or the violence content is minimal or is
depicted appropriately.
8ANS+
8+ General - Not recommended for young children.
Programming intended for a broad audience but contains light
or occasional violence. Adult supervision recommended.
13ANS+
Programming may not be suitable for children under the age
of 13 - Contains either a few violent scenes or one or more
sufficiently violent scenes to affect them. Adult supervision
strongly suggested.
16ANS+
Programming may not be suitable for children under the age of
16 - Contains frequent scenes of violence or intense violence.
18ANS+
18+ years old. Programming restricted to adults. Contains
constant violence or scenes of extreme violence.
CANADIAN FRENCH RATINGS
FV Fantasy-Cartoon Violence.
V Violence
S Sex
L Offensive Language
D Dialogue with sexual content.
Chart 3
<US Rating>
<Canadian Rating>
If a program or movie exceeds the ratings you have set, a message
will appear on a black background and sound is muted.
<When V-Chip Control is activated>
Temporarily Deactivate V-Chip Control
Press NUMBER keys to enter your secret code in the Blocking
Message screen.
• V-Chip Control is reactivated when power is turned off or power
failure occurs.
Deactivate V-Chip Control
Blocking Message
To View a Blocked Program/Movie
1 Enter your secret code. (p. 28)
2 Then, set US MOVIES and/or US TV PROGRAMS
and/or CANADIAN ENGLISH LANGUAGE and/or
CANADIAN FRENCH LANGUAGE to “OFF” using
▲▼ and SET. (Ratings set on pages 28~30 are
retained and will be in effect when V-Chip Control is
activated again.)
This unit has a built in decoder that provides a visual depiction
of the audio portion of a television program in the form of written
words across the screen (white or colored letters on a black
background). It allows you to read the dialog of a television program
or other information.
Notes:
• This feature is available only with the 480i input signal and with the
programs including the closed caption.
• The closed caption is not displayed when using HDMI connection (p. 17) or
when you set the aspect to “ZOOM” (p. 26).
When a disc supporting closed captions is used, the subtitle and the
closed caption may overlap. In this case, turn the subtitle or caption mode
off. (p. 49)
1 Press MENU.
2 Press ◄► to select “SET UP.”
3 Press ▲▼ to select “CLOSED CAPTION” and press
ENTER.
MENU
ADJ. SET UP FUNC.
LANGUAGE
PROGRAM CH
CLOCK
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
OK
PAGE
RETURN
SELECT
Closed Caption System
PROGRAM RATING EXCEEDED
ACCESS CODE _ _ _ _
PROGRAM RATING EXCEEDED
ACCESS CODE _ _ _ _
LOCK
BLOCK PROGRAMS:
U.S. MOVIES
STATUS OFF ON
CHANGE SETTING
CHANGE CODE
_ _ _ _
CHANGE
RETURN
SELECT
LOCK
BLOCK PROGRAMS:
CANADIAN ENGLISH
STATUS OFF ON
CHANGE SETTING
CHANGE CODE
_ _ _ _
CHANGE
RETURN
SELECT
31
TV Operation
C2C1NO
CLOSED CAPTION
ON MUTE NO
MODE OFF
CHANGE
RETURN
SELECT
4 Press ▲▼ to select “
CC
ON MUTE.”
5 Press ◄► to select “NO (OFF)”, “C1” or “C2”.
4 Press ▲▼ to select “
CC
MODE”.
5 Press ◄► to select “OFF”, “C1” or “C2”.
CLOSED CAPTION
ON MUTE NO
MODE OFF
CHANGE
RETURN
SELECT
C2C1OFF
OFF:
Recommended mode when Closed Caption is not being
used.
C1:
For video related information that can be displayed (up to 4
lines of script strategically placed on the television screen
so that it does not obstruct relevant parts of the picture).
C2:
Another mode used for video related information.
Recording and Playing Back a Closed
Caption Program
Record:
Record normally. Closed Caption signal, if present, is recorded
automatically.
Playback:
Start playback. Perform steps to select desired caption mode.
NO:
A narration will not be displayed when MUTE button is
pressed for silence.
C1 or C2:
A narration of selected TV programs is displayed when
MUTE button is pressed for silence.
CC
ON MUTE
Displays the On-Screen Closed Caption when the MUTE button
is pressed. To delete the closed caption, press the MUTE button
again.
CC
MODE
Displays the On-Screen Closed Caption.
Audio Adjust
1 Press MENU.
2 Press ◄► to select “ADJ.”
3 Press ▲▼ to select “AUDIO ADJUST” and press
ENTER.
MENU
ADJ. SET UP FUNC.
PICTURE
PICTURE ADJUST
POSITION/SIZE
AUDIO
AUDIO ADJUST
OK
PAGE
RETURN
SELECT
AUDIO ADJUST PAGE 1/2
NORMAL
MODE STANDARD
BASS 0
TREBLE 0
BALANCE 0
SURROUND OFF ON
D.ENHANCER OFF ON
STEREO SAP MONO
HDMI IN AUTO
CHANGE
RETURN
SELECT
4 Press ▲▼ to select the sub-menu.
5 Press ◄► to select the setting listening the sound.
NORMAL/NORMALIZE
Select “NORMALIZE” and press ENTER to return each MODE to
the factory default setting.
Notes:
“NORMAL” means the MODE is in the factory default setting. “NORMAL”
changes to “NORMALIZE” when you change the setting of BASS,
TREBLE, BALANCE, SURROUND, D.ENHANCER or AUDIO LEVELER.
You can normalize each MODE separately.
MODE
You can also change “MODE” by pressing AUDIO MODE on the
Remote Control.
AUTO Automatically adjusts for a wide Dynamic Range.
STANDARD Emits the original sound.
DYNAMIC Gives contrast to sound.
(Continued on next page.)
BASS, TREBLE, BALANCE, SURROUND,
D.ENHANCER
You can change the level of each sub-menu (BASS, TREBLE,
BALANCE, SURROUND, D.ENHANCER) for each MODE
(AUTO, STANDARD and DYNAMIC) according to your personal
preference.
BASS Adjusts low frequencies.
TREBLE Adjusts high frequencies.
BALANCE Adjusts left and right volume.
SURROUND To enjoy a concert hall effect.
D.ENHANCER
The volume of the center channel is raised to make
dialog easier to hear. (DVD playback only)
AUDIO ADJUST PAGE 2/2
NORMAL
AUDIO LEVELER 0
ADJUST
RETURN
SELECT
Note:
To activate this feature, set
CC
MODE to OFF.
32
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
STEREO / SAP / MONO
• Red display : With signal
White display : No signal
White display (All modes) : MONO
• To change the mode using AUDIO button.
STEREO Two channel Audio reception.
SAP
Second Audio Programming (typically used for bilingual
audio).
MONO Use when stereo signal is weak.
HDMI
When using HDMI connection (p. 17), this feature will let you
switch between Analog Input and Digital Input.
AUTO Automatically selects Analog / Digital signal.
DIGITAL Digital Input only.
ANALOG Analog Input only.
AUDIO LEVELER
You can adjust the volume level for each of the input mode (TV,
VIDEO1, VIDEO2, COMPONENT, HDMI and DVD/SD mode).
Picture Adjust
1 Press MENU.
2 Press ◄► to select “ADJ.”
3 Press ▲▼ to select “PICTURE ADJUST” and press
ENTER.
MENU
ADJ. SET UP FUNC.
PICTURE
PICTURE ADJUST
POSITION/SIZE
AUDIO
AUDIO ADJUST
OK
PAGE
RETURN
SELECT
5 Press ◄► to adjust the setting watching the picture
behind the menu.
PICTURE ADJUST PAGE 1/2
NORMAL
PIC MODE VIVID
BACK LIGHT 0
PICTURE 0
BRIGHTNESS 0
COLOR 0
TINT 0
SHARPNESS 0
AI PICTURE OFF ON
CHANGE
RETURN
SELECT
6 Press ▲▼ to select “ADVANCED ADJUST” and
press ◄► to select “ON.”
PICTURE ADJUST PAGE 2/2
COLOR TEMP
COOL
ADVANCED ADJUST
OFF ON
CHANGE
RETURN
SELECT
ADJUST
RETURN
SELECT
ADVANCED ADJUST
NORMALIZE
EDGE TRANS. MID
GRAY EMPHASIS MID
GAMMA ADJUST MID
BLACK EXTENSION + 8
WHITE CHAR CORR + 8
7 Press to display the sub-menu.
NORMAL/NORMALIZE
Select “NORMALIZE” and press ENTER to return each PIC
MODE to the factory default setting.
Notes:
“NORMAL” means the PIC MODE is in the factory default setting.
“NORMAL” changes to “NORMALIZE” when you change the setting of
BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS, AI
PICTURE, COLOR TEMP or ADVANCED ADJUST.
You can normalize each PIC MODE separately.
PIC MODE
You can also change “PIC MODE” by pressing PICTURE MODE
on the Remote Control.
STANDARD Displays a standard image.
CINEMA Ideal for watching movies in a dark room.
VIVID Displays a clear image with high contrast.
CUSTOM
You can customize the picture settings to suit your
preference. (Refer to “ADVANCED ADJUST” on page
33.)
PIC MODE setting is stored separately for TV, VIDEO1, VIDEO2,
COMPONENT, HDMI and DVD/SD mode.
4 Press ▲▼ to select the sub-menu.
BACK LIGHT, PICTURE, BRIGHTNESS, COLOR,
TINT, SHARPNESS, AI PICTURE, COLOR TEMP
You can change the level of each Item (BACK LIGHT, PICTURE,
BRIGHTNESS, COLOR, TINT, SHARPNESS, AI PICTURE and
COLOR TEMP) for each MENU (STANDARD, CINEMA, VIVID
and CUSTOM) according to your personal preference.
Sub-menu Function
BACK LIGHT Luminance of the back light is adjusted.
PICTURE
Selects proper brightness and density for the
room.
BRIGHTNESS
Adjusts for easier viewing of dark pictures such
as night scenes.
COLOR Adjusts the level of color.
TINT Adjusts for flesh tone color.
SHARPNESS Adjusts the degree of sharpness.
AI PICTURE
Displays black and white more accurately when
turned ON.
COLOR TEMP
(Color temperature)
Increases or decreases WARM (red) and COOL
(blue) colors to suit personal preference.
ADVANCED ADJUST
“ADVANCED ADJUST” is
displayed only when PIC MODE is
set to CUSTOM.
33
TV Operation
ADVANCED ADJUST
(Only when you selected CUSTOM in PIC MODE)
Item Function
EDGE TRANS.
Improves edges in the background to reduce
overshooting and improve the sense of depth.
GRAY EMPHASIS
Emphasizes the sharpness in density of many
color differences.
GAMMA ADJUST
Increases the brightness of the center ranges to
improve detail and contrast in dark scenes.
BLACK EXTENSION Contrast level will be improved.
WHITE CHAR CORR It makes white characters brighter.
Other Adjust
1 Press MENU.
2 Press ◄► to select “SET UP.”
3 Press ▲▼ to select “OTHER ADJUST” and press
ENTER.
MENU
ADJ. SET UP FUNC.
LANGUAGE
PROGRAM CH
CLOCK
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
OK
PAGE
RETURN
SELECT
4 Press ▲▼ to select the item.
5 Press ◄► to select the setting.
OTHER ADJUST PAGE 1/2
VIDEO NR
OFF ON
MPEG NR
OFF ON
3D Y/C
OFF ON
COLOR MATRIX
SD HD
CHANGE
RETURN
SELECT
OTHER ADJUST PAGE 2/2
POWER SAVE
SAVING
FRONT DISPLAY
AUTO
CHANGE
RETURN
SELECT
VIDEO NR
In the event of weak signal conditions, the VIDEO NR circuitry
reduces noise in the luminance channel. It is important to note
that VIDEO NR should remain OFF for maximum picture detail
when receiving a strong signal or viewing high-quality video.
ON When signal is noisy.
OFF When signal is high-quality.
PIC MODE setting is stored separately for TV, VIDEO1, VIDEO2,
COMPONENT, HDMI and DVD/SD mode.
MPEG NR
Noise unique to DVD, STB, etc. will be reduced.
3D Y/C
Minimizes noise and cross color in the picture. Not available for
COMPONENT VIDEO INPUT, HDMI and DVD/SD mode input.
PIC MODE setting is stored separately for TV, VIDEO1, VIDEO2,
COMPONENT, HDMI and DVD/SD mode.
ON Reduces noise in the picture.
OFF Set to OFF if picture appears unnatural.
ON Usually set to ON.
OFF Set to OFF if picture appears unnatural.
COLOR MATRIX
Displays input signals (480p signals) in a natural color.
Automatically adjusts color parameters for HD (high definition)
and SD (standard definition).
POWER SAVE
The POWER SAVE mode is suitable for watching television at
night. Power consumption will be reduced.
FRONT DISPLAY
SD When the input signal is a normal TV system (NTSC).
HD When the input signal is a High-definition system (HD).
STANDARD
Set to STANDARD normally. The peak brightness is not
reduced and you can view normal lighting transitions in
the picture.
SAVING
The peak brightness of the brightest scenes is reduced
conserving power while giving you a natural picture.
The Front Display brightness is adjustable. To display the clock
even when power is off, please select DIM or BRIGHT.
AUTO
Display is bright only when power is ON. Display goes
out when power is OFF, but lights dimly during recording,
etc.
BRIGHT Display is always bright.
DIM Display is always dim.
OFF Display is always off.
34
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Front view
Before using Disc/Card Functions
1 Confirm that disc or card is inserted.
2 Press DVD or SD to select the drive.
The “DVD” or “SD” indicator flashes on the Front Display.
The DVD or SD indicator on the unit lights.
3 Each operation is carried out.
Or
1 Press OPEN/CLOSE on the unit to open the tray and
insert a disc.
Press the button again to close the tray.
Insert label-up.
Insert inside the tray’s guide.
Non-cartridge disc
Insert label-up with the
arrow facing in.
Cartridge disc
Notes:
Load double-sided discs so the label for the side you want to record/play is
facing up.
When using 8 cm (3˝) DVD-RAM, remove the disc from the cartridge and
insert it, making sure you align it with the groove.
Inserting a Disc
Disc tray
Inserting/Removing the Card
Only insert or remove the card after turning
the unit off.
When the “SD” indicator on the unit display is flashing, the card is
being read from or written to. Do not turn off the power or remove
the card. Such action may result in malfunction or loss of the
card’s contents.
Inserting the Card
Insert the Card (labeled side up, cropped corner
right) and hold in place until you here a click.
cropped corner
Removing the Card
Press the center of the Card and then pull it
straight out.
Before Using the Disc or Card
DRIVE SELECT
–DVD
DRIVE SELECT
–SD
OPEN/CLOSE
DVD
Indicator
SD
Indicator
Disc Tray SD Card SlotFront
Display
35
Disc / Card Operation
Front view
No display
DVD/SD Functions Window
MENU
ADJ. SET UP FUNC.
DVD/SD
OK
PAGE
RETURN
0:50 XP6/8 10:15 PM
T2 0:05.14 XP
T1 0:00.10 SP
Remain
By using the DVD/SD Functions window you may access the main
functions quickly and easily.
To exit the DVD/SD Functions window
Press RETURN.
Status messages (Disc)
Status messages appear on the television when you operate the
unit to show the condition of the unit.
About Still Picture, refer to “To display information about the Still Pictures”
on page 54.
1 Press DISPLAY in play mode.
The display changes each time you press the button.
Disc indication
REC
PLAY
L R
DVD-RAM
Selected audio type
Recording or play status/input
channel
Date and time
Recording mode Available recording time and
recording mode
Play position
Elapsed play time
Elapsed recording time
1 Press MENU in Stop mode, then press ◄► to select
“FUNC.”
2 Press ENTER.
Opening the DVD/SD Functions Window automatically places unit
into DVD mode.
3 Press ▲▼◄► to select an item and press ENTER.
Functions displayed depend on the type of disc.
e.g., DVD-RAM
Function
The same operation with
Remote Control Button
Pages
DIRECT NAVIGATOR DIRECT NAVIGATOR 45, 51~53
TIMER RECORDING PROG/CHECK 40~41
DUBBING 64~66
FLEXIBLE RECORDING F REC 39
PLAY LIST 57~59
SET UP DVD SETUP 67~69
DISC SETTING 60~62
e.g., SD CARD
Function
The same operation with
Remote Control Button
Pages
DIRECT NAVIGATOR DIRECT NAVIGATOR 54~56
TIMER RECORDING PROG/CHECK 40~41
DUBBING 64~66
COPY ALL PICTURES 66
SET UP 67~69
CARD SETTING 60~61
e.g., DVD-RAM
DVD/SD Functions Windows and Status Messages
DVD
SD
Play back
Record
Dubbing
/ Edit
Set up
DISC PROTECTION OFF
CARTRIDGE PROTECTION OFF
DVD-RAM
DIRECT NAVIGATOR
TIMER RECORDING
DUBBING
PLAY LIST
SETUP
FLEXIBLE RECORDING
DISC SETTING
MENU
▲▼◄►
DISPLAY
ENTER
DVD-A VCD CDDVD-R DVD-VRAM MP3
RETURN
Disc Tray SD Card Slot
36
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Disc Type Available Function Page
RAM
Playback
Start from a selected item
(using NUMBER keys)
46
Fast forward and rewind (Search) 45
Skip a program or track 45
Quick View 46
Slow-motion playback 46
Frame-by-frame viewing 46
Skip a minute forward (CM Skip) 45
Display the television image as a picture-in-
picture
46
Skip the specified time (Time Slip) 46
Repeat playback 50
Create Chapters 48
Select subtitle on/off 49
Change audio during play 48
Erase a program that is being played back 47
Play with Direct
Navigator/Play List
Play the recorded programs
(DIRECT NAVIGATOR)
45, 51
Play the created chapters
(DIRECT NAVIGATOR)
51
Play Still Pictures (DIRECT NAVIGATOR) 54
Play the created play lists (PLAY LIST) 57
Play the created chapters of Play List
(PLAY LIST)
58
Recording
Timer Recording 40~41
Flexible Recording 39
Play from the beginning of the title you are
recording (Chasing playback)
42
Simultaneous Recording and Play 42
Review the recorded images while recording
(Time Slip)
42~43
Erase or Edit a program with Direct Navigator/
Play List
Erase the selected programs 52
Display information about the recorded date/
time/channel, etc.
52
Enter a title name to a program 52
Protect the title from accidental erasure 52
Select and erasing unnecessary parts of the
programs
52
Change an image to be shown as a thumbnail
picture in the Title View
53
Select a point at which to divide the title into
two.
53
Edit chapters in the DIRECT NAVIGATOR 53
Create play lists 57~58
Edit play lists 58~59
Edit chapters in the PLAY LIST 59
Playback Still
Pictures
Display still pictures one by one with constant
interval (Slide Show)
56
Rotate a still picture 55
Enlarge a still picture (Zoom in/Zoom out) 55
Disc Type Available Function Page
RAM
Erase or Edit Still
Pictures
Erase still pictures 55
Display information about the still picture 54
Change a folder name 56
Protect the still picture from accidental erasure 56
Transfer (dubbing) still pictures
(Card DVD-RAM)
64~66
Disc Setting
Enter the Disc name 60
Protect the Disc from accidental erasure 60
Erase all titles or play lists 60~61
Format a Disc 61
DVD-R
Playback
Start from a selected item
(using NUMBER keys)
46
Fast forward and rewind (Search) 45
Skip a program or track 45
Slow-motion playback 46
Frame-by-frame viewing 46
Skip a minute forward (CM Skip) 45
Display the television image as a picture-in-
picture
46
Skip the specified time (Time Slip) 46
Repeat playback 50
Select subtitle on/off 49
Erase a program that is being played back 47
Play with Direct
Navigator
Play the recorded programs
(DIRECT NAVIGATOR)
45, 51
Recording
Timer Recording 40~41
Flexible Recording 39
Erase or Edit a program
with Direct Navigator
Erase the selected programs 52
Display information about the recorded date/
time/channel, etc.
52
Enter a title name to a program 52
Change an image to be shown as a thumbnail
picture in the Title View
53
Disc Setting
Enter the Disc name 60
Select whether to show the top menu after
finalizing the disc
61
A process that makes play of a recorded
DVD-R possible on equipment that can play
such media. (Finalize)
62
Function List
37
Disc / Card Operation
Disc Type Available Function Page
DVD-A
Playback
Start from a selected item
(using NUMBER keys)
46
Fast forward and rewind (Search) 45
Skip a program or track 45
Slow-motion playback 46
Frame-by-frame viewing 46
Repeat playback 50
Change the sound track language 49
Select subtitle language 49
Select the angle 49
DVD-V
Playback
Start from a selected item
(using NUMBER keys)
46
Fast forward and rewind (Search) 45
Skip a program or track 45
Slow-motion playback 46
Frame-by-frame viewing 46
Repeat playback 50
Change the sound track language 49
Select subtitle language 49
Select the angle 49
CD
MP3
Playback
Start from a selected item
(using NUMBER keys)
46
Fast forward and rewind (Search) 45
Skip a program or track 45
Play MP3 files recorded on CD-R/RW with a
computer. (MP3 only)
47
Repeat playback 50
VCD
Playback
Start from a selected item
(using NUMBER keys)
46
Fast forward and rewind (Search) 45
Skip a program or track 45
Slow-motion playback 46
Frame-by-frame viewing 46
Repeat playback 50
Playback Control on/off 49
Change audio during play 48
Disc Type Available Function Page
SD
Playback Still
Pictures
Display still pictures one by one with constant
interval (Slide Show)
56
Rotate a still picture 55
Enlarge a still picture (Zoom in/Zoom out) 55
Erase or Edit Still Pictures
Erase still pictures 55
Display information about the still picture 54
Change a folder name 56
Protect the still picture from accidental
erasure
56
Set the number of images to be printed
(DPOF)
56
Transfer (dubbing) still pictures
(Card DVD-RAM)
64~66
Card
Setting
Format a Card 61
38
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Front view
It is not possible to record continuously from one side of a double sided
disc to the other. You will need to eject the disc and turn it over.
When using 8 cm (3) DVD-RAM, remove the disc from the cartridge.
You can record up to 99 titles on one disc.
You can record digital broadcasts that allow “one time only recording”
when using CPRM (p. 70) compatible DVD-RAM discs. And you cannot
record digital broadcasts that allow “one time only recording” when using
DVD-R.
DVD-RAM/DVD-R have limitations on recording (pp. 8~10).
Recording will take place on open space on the disc. Data will not be
overwritten.
If there is no space left on the recording disc, you will need to erase
unwanted titles (pp. 47, 52) or use a new disc.
You cannot record on finalized DVD-R discs.
1 Press OPEN/CLOSE on the unit to open the tray and
insert a disc. (p. 34)
Press the button again to close the tray.
RAM
When using a DVD-RAM for the first time with this unit,
format it to ensure accurate recording. (Refer to “Format Disc” on
page 61.)
2 Press CH ▲▼ or NUMBER keys to select the
channel.
3 Press REC MODE to select the recording mode. (See
next page.)
4 Press REC to start recording.
You cannot change the channel or recording mode during recording.
You can change the audio being received by pressing AUDIO during
recording.
To stop recording
Press STOP.
• Recorded as 1 title until the position where stopped.
DVD-R
It takes about 30 seconds for the unit to complete
recording management information after recording finishes.
To pause recording
Press PAUSE.
Press again to restart recording.
To select with the NUMBER keys:
To specify a time to stop recording
During recording
Press REC on the unit or the Remote Control to select the
recording time.
Each time you press the button:
• This does not work during timer recordings (pp. 40~41) or while
using Flexible Recording (p. 39).
• Recording stops and the set time is cleared if you press STOP.
• The set time is cleared if you change the recording mode or
channel while recording is paused.
Recording
e.g., When you select
channel 4
e.g., When you
select “XP”
* To record sound using LPCM (possible only in XP mode):
Select “LPCM” in “Audio for XP Recording” (the picture quality may
go down slightly). (p. 69)
Preparation
Release protection before proceeding:
- Cartridge (p. 9)
RAM
- Disc (p. 60)
RAM
OFF 0:30 1:00 1:30
2:004:00 3:00
CH ▲▼
PAUSE
REC MODE
REC
AUDIO
STOP
NUMBER keys
OPEN/CLOSE
Front Display
DVD-RRAM
SP
XP*
LP EP
Recording television programs
e.g., 5: [0] [5]
15: [1] [5]
115: [1] [1] [5]
▲▼◄►
ENTER
F REC
RETURN
39
Disc / Card Operation
Recording modes and approximate recording
times
Depending on the content being recorded, the recording times may
become shorter than indicated.
Note:
When recording to DVD-RAM using “EP (8 H)” mode, play may not be
possible on DVD players that are compatible with DVD-RAM. In this case
use “EP (6 H)” mode.
FR (Flexible Recording Mode) (See right)
The unit automatically selects a recording rate between XP and EP
(8 H) that will enable the recordings to fit in the available recording
time on the disc with the best possible recording quality.
You can set when programming timer recordings.
All the recording modes from XP to EP appear in the display.
(Unit: hour)
EP (6 H)
*2
XP
SP
LP
EP (8 H)
Picture quality
Recording time
Selecting audio to record
DVD-RAM
DVD-R
(4.7 GB)
Single-sided
(4.7 GB)
Double-sided
(9.4 GB)
XP (High quality) 12
*1
1
SP (Normal) 24
*1
2
LP (Long play) 48
*1
4
EP (Extra long play) 8 (6
*2
) 16*1 (12
*1*2
) 8 (6
*2
)
Disc
Recording
Mode
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by
the unit or the disc.
Flexible Recording (FR)
The unit calculates a recording rate that enables the recording to fit
in the time you set (within the remaining time on the disc) with the
best picture quality.
Recorded Remain
45 minutes in
SP mode
60 minutes
Program to be recorded
Perfectly fit!
Recording rate
between SP and LP
e.g., DVD-RAM
2 Press ◄► to select “Hour” and “Min.” and press
▲▼ to set the recording time.
You can also set the recording time with the NUMBER keys.
Maximum recording time is 8 hours.
3 Press ▲▼◄► to select “Start” and press ENTER to
start recording.
• Recording starts.
The recording mode becomes FR mode.
To exit the screen without recording
Press RETURN.
To stop recording partway
Press STOP.
1 Press F REC in Stop mode.
You can also select “FLEXIBLE RECORDING” on the DVD/SD
Functions Window. (p. 35)
Record in FR mode
Maximum rec time 3 Hour 00 Min.
Set recording time 3 Hour 00 Min.
Start Cancel
FLEXIBLE REC
Note:
It is not possible to change channel or recording mode while Flexible
Recording is paused.
DVD-RRAM
Preparation
Select the channel to record.
*1
Recording time of double-sided disc is sum total of both sides of disc.
*2
When “Recording time in EP mode” (p. 68) is set to “EP (6 H)” in the
SETUP menu. The sound quality is better when using “EP (6 H)” than
when using “EP (8 H)”.
DVD-RRAM
Select whether to record the main or secondary audio type (SAP)
when recording to DVD-R or DVD-RAM. (You cannot change
secondary audio when recording audio to DVD-R or DVD-RAM
from an external source.) (p. 69)
40
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Front view
1:58 SPRemaining Recording Time
3/29 MON 12:53 PM
TIMER
RECORDING
MODE
OFFONCHANNEL DATE
39
New Timer Program
5:10 PM4:20 PM SP
CHECK
OK
NO
01 3/29 MON
Timer Recording
You can enter up to 16 programs up to a month in advance.
When connecting a cable TV box or satellite receiver, the VCR Plus+
system does not work. Program the timer recording manually. (pp. 40~41)
Using VCR Plus+ system
Entering VCR Plus+ number is an easy way of timer recording. You
can find these codes in TV listings in newspapers and magazines.
1 Press VCR Plus+.
2 Press NUMBER keys to enter the VCR Plus+
number.
• Press to move back to correct a digit.
3 Press ENTER.
When “XP” is displayed in the unit’s display, the recording mode
automatically changes to “FR” in order to prevent loss of recording
when there is not enough space. Change to “XP” mode if you want to
set the timer recording using “XP” mode.
Confirm the program and make corrections if necessary using
▲▼◄►. (See step 3 on next page.)
You can also press REC MODE to change the recording mode.
To enter the title of the program
Press ◄► to select “Enter Name” and press ENTER. (p. 63)
4 Press ENTER.
The setting are stored.
Check to make sure “OK”
is displayed.
5 Press RETURN.
• “ ” lights on the Front Display to indicate timer recording standby
has been activated.
To cancel recording when recording has already
begun
Hold down STOP for a few seconds.
You can enter up to 16 programs up to a month in advance.
(Each daily or weekly program is counted as one program.)
When connecting a cable TV box or satellite receiver, select the channel
on the cable TV box or satellite receiver before timer recording starts.
1 Press PROG/CHECK.
2 Press ▲▼ to select “New Timer Program” and press
ENTER.
Manually programming
Repeat steps 1~4 to program other recordings.
1:58 SPVCR Plus+ Remaining Recording Time
3/29 MON 12:53 PM
Enter the PLUS CODE with the numbered buttons.
09
No.
1:58 SPRemaining Recording Time
3/29 MON 12:53 PM
TIMER
RECORDING
MODE
OFFONCHANNEL DATE
5:10 PM4:20 PM3/29 MON 39 SP
Enter Name
1:58 SPRemaining Recording Time
3/29 MON 12:53PM
TIMER
RECORDING
MODE
OFFONCHANNEL DATE
64
New Timer Program
5:10 PM4:20 PM SP
CHECK
OK
NO
01 3/29 MON
Press ENTER or VCR Plus+ to
store new program.
Preparation
Release protection before proceeding:
- Cartridge (p. 9)
RAM
- Disc (p. 60)
RAM
Insert a disc (p. 34) and confirm there is sufficient empty space for
recording on it (p. 35). You can also confirm the disc information. (p. 60)
Caution for Timer recording
Timer recording automatically starts at the set time.
• Timer recording can be started whether the unit is turned on
or off. When the unit is turned off, the sound and the video
cannot be outputted to the TV.
Highlighted line is ready for
programming.
ENTER
REC MODE
NUMBER keys
CANCEL
STOP
▲▼◄►
PROG/CHECK
VCR Plus +
Front Display
DVD-RRAM
RETURN
41
Disc / Card Operation
1:58 SPRemaining Recording Time
3/29 MON 12:53 PM
TIMER
RECORDING
MODE
OFFONCHANNEL DATE
64
New Timer Program
5:10 PM4:20 PM SP
CHECK
OK
NO
01 3/29 MON
64 8:00 PM7:00 PM SP
OK
02 4/5 MON
Notes:
• “ ” flashes when the unit cannot go to timer recording standby (e.g., a
recordable disc is not in the disc tray). Check the disc carefully.
The actual time recorded may be longer than the program itself when
television programs are recorded using VCR Plus+ system.
When you program successive timer recordings to start immediately
one after the other, the unit cannot record the part at the beginning of
the later programs (a few seconds when recording with DVD-RAM and
approximately 30 seconds when recording with DVD-R).
If you DST (Daylight Saving Time) to On when manually setting the clock
(p. 23), timer recording may not work when summer switches to winter and
vice versa.
When the unit is carrying out a timer recording:
- You may utilize playback.
When the disc is not inserted, the disc is full or a non-recordable disc
is inserted, the warning message appears because Timer Recording is
disabled.
During Timer Recording, dubbing and editing are disabled.
Timer recordings are automatically placed in order of DATE ON (Start
Time).
If timer recording times overlap, the program with the earliest start time
is recorded first. The overlapped portion of the later program will not be
recorded.
Press and hold ▲▼ to alter the Start (Start time) and Stop (Finish
time) in 30-minute increments.
You can also set CHANNEL (Program Position/TV Station Name),
DATE (See below), ON (Start time), and OFF (Finish time) with the
NUMBER keys.
You can also press REC MODE to change the recording mode.
• Date
Date
Daily timer
Weekly timer
Current date up to one month later
minus on day
SUN-SATMON-SATMON-FRI
WEEKLY SUN---WEEKLY SAT
4 Press ENTER.
3 Press to move through the items and change the
items with ▲▼.
Check to make sure “OK”
is displayed.
5 Press RETURN.
• “ ” lights on the Front Display to indicate timer recording standby
has been activated.
To cancel recording when recording has already
begun
Hold down STOP for a few seconds.
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by
the unit or the disc.
1:58 SPRemaining Recording Time
3/29 MON 12:53 PM
TIMER
RECORDING
MODE
OFFONCHANNEL DATE
8:00 PM7:00 PM4/5 MON64
Enter Name
SP
Repeat steps 2~4 to program other recordings.
Enter Name:
Press ◄► to select “Enter Name” and press ENTER. (p. 63)
1:58 SPRemaining Recording Time
3/29 MON 12:53 PM
TIMER
RECORDING
MODE
OFFONCHANNEL DATE
New Timer Program
CHECKNO
Press ENTER or VCR Plus+ to
store new program.
Check, change or delete a program
1 Press PROG/CHECK.
To change a program
Press ▲▼ to select the program and press ENTER.
Press ◄► to move through the items and change the items with
▲▼, then press ENTER.
To delete a program
Press ▲▼ to select the program and press CANCEL.
• You cannot delete programs that are currently recording.
To put the unit on timer recording standby
Press RETURN.
• “
” lights on the Front Display to indicate timer recording
standby has been activated.
Notes:
Programs that failed to record are displayed gray. They are automatically
deleted from the timer recording list at 4 a.m. two days later.
During timer recording, you can change the end time as long as the
recording mode is not “FR”.
Icons
This program is currently recording.
The times overlap those in another program. Recording of the
program with the later start time starts when the earlier program
finishes recording.
You stopped a weekly or daily timer recording. The icon
disappears the next time the timer starts recording.
The disc was full so the program failed to record.
The material was copy-protected so it was not recorded.
The program did not complete recording because the disc is dirty
or some other reason.
Message displayed in the CHECK line
OK: Displayed if the recording can fit in the remaining space.
(Date): For recordings made daily or weekly, the display will show
until when recordings can be made (up to a maximum
of one month from the present time) based on the time
remaining on the disc.
! : It may not be possible to record because:
the disc is write-protected
there is not enough space left
the number of possible titles has reached its maximum.
2 Press RETURN.
The timer recording list disappears.
42
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Front view
Preparation
Select the channel to record.
Release protection before proceeding:
- Cartridge (p. 9)
RAM
- Disc (p. 60)
RAM
NUMBER keys
STOP
▲▼◄►
REC MODE
REC
RETURN
ENTER
PAUSE
1 Press PLAY/×1.3 while recording or timer recording.
TIME SLIP Indicator on the unit lights.
Chasing playback
You can start play from the beginning of the title while continuing to
record it.
To stop play
Press STOP.
To stop recording
Press STOP. Wait 2 seconds, press STOP again.
To stop timer recording
Press STOP. Wait 2 seconds, hold down STOP for a few
seconds.
Notes:
Sound is not output while fast-forwarding.
Play cannot be started until at least 2 seconds after recording starts.
PLAY/×1.3
TIME SLIP
DIRECT
NAVIGATOR
TIME SLIP Indicator
1 Press DIRECT NAVIGATOR while recording or timer
recording.
2 Press ▲▼◄► to select a title and press ENTER.
TIME SLIP Indicator on the unit lights.
Simultaneous Recording and Play
You can start play of the title you are recording or play a title
previously recorded.
To stop play
Press STOP.
To exit the DIRECT NAVIGATOR screen
Press DIRECT NAVIGATOR.
To stop recording
First, press STOP to stop play. Then, exit DIRECT NAVIGATOR,
wait 2 seconds, and press STOP again.
To stop timer recording
First, press STOP to stop play. Then, exit DIRECT NAVIGATOR,
wait 2 seconds, and hold down STOP for a few seconds.
Notes:
Sound is not output while fast-forwarding.
During simultaneous recording and play, you cannot edit or erase with the
Direct Navigator or play lists.
If you start play while the unit is on standby for timer recording, recording
starts when the time you set is reached.
07 08
-
- - - - -
10 10/27 Mon 8 10/27 Mon
DIRECT NAVIGATOR Title View
DVD-RAM
V
: Currently recording
Selecting title 07
e.g.,
You want to watch the movie you
recorded yesterday (title 07) while
recording sport (title 08).
Title 07 is played back while title 08 is
being recorded.
0 min
PLAY
REC
1 Press TIME SLIP while recording or timer recording.
TIME SLIP Indicator on the unit lights.
Play starts from 30 seconds previous to that moment. What is
currently being recorded appears as a picture-in-picture and you will
hear the playback audio.
Time Slip becomes unavailable if any V-Chip setting is made in the
LOCK item of the SET UP.
Play starts from
30 seconds previous.
The current recording
images.
You can play the title being recorded to check that it is being
recorded correctly. You can also check parts that were recorded
previously.
Time Slip
Playing while you are recording
RAM
RAM
RAM
Various Recording
INPUT
43
Disc / Card Operation
2 Press ▲▼ to select the time and press ENTER.
The time indicator will go off after about 5 seconds, but will turn on
again when you set the indicator.
• Press ▲▼ to alter in 1-minute units. Press and hold ▲▼ to alter in
10-minute units.
To stop play
Press STOP.
To stop recording
Press STOP. Wait 2 seconds, press STOP again.
To stop timer recording
Press STOP. Wait 2 seconds, hold down STOP for a few
seconds.
-5 min
PLAY
REC
To show the play images in full
Press TIME SLIP.
• Press TIME SLIP to return to the picture-in-picture screen.
Note:
The image on the small screen may be distorted or flicker depending on
the scene. However, this does not affect the image recorded.
Recording from a video cassette
recorder
Preparation
Connect a video cassette recorder to this unit’s input terminals.
Notes:
When recording using this unit’s input terminals, only the sound received
at the time of recording will be recorded. As long as secondary audio that
is recorded on the video cassette is not output on the unit in play, it is not
recorded.
Recording cannot be done when input is Component or HDMI.
e.g., Connecting the L2 input terminals
To skip unwanted parts
Press PAUSE to pause recording. (Press again to restart
recording.)
To stop recording
Press STOP.
Almost all videos and DVD software on sale have been
treated to prevent illegal copying. Any software that has
been so treated cannot be recorded using this unit.
This unit
VIDEO S VIDEO
IN
AUDIO
R
L
If the audio output of the other equipment is monaural, connect to
L/MONO.
* The S-VIDEO terminal achieves a more vivid picture than the VIDEO
terminal.
Other video equipment
Audio/Video cable
1 Press INPUT to select the input channel for the
equipment you have connected in Stop mode.
2 Press REC MODE to select the recording mode (XP,
SP, LP or EP).
Using Flexible Recording (p. 39), you can save content of a video
cassette to 1 disc with the best possible quality of recording without
wasting disc space.
3 Start play on the other equipment.
4 Press REC.
• Recording starts.
Yellow
S-Video cable*
DVD-RRAM
Red White
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by
the unit or the disc.
44
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Front view
It is not possible to play continuously from one side of a double sided disc
to the other. You will need to eject the disc and turn it over.
When using 8 cm (3) DVD-RAM, remove the disc from the cartridge.
1 Press OPEN/CLOSE on the unit to open the tray and
insert a disc. (p. 34)
Press the button again to close the tray.
2 Press PLAY/×1.3.
The unit takes some time to read the disc before play starts.
RAM
DVD-R
Play starts from the most recently recorded title.
DVD-V
DVD-A
VCD
CD
MP3
Play starts from the beginning of the disc.
Playing Discs
To stop play
Press STOP.
DVD-V
DVD-A
CD
VCD
MP3
Press STOP again to return to the television screen.
• When “PLAY” flashes on the Front Display, resume function is
active. (See below.)
• The screen saver may appear when you stop play. Press
STOP again and you can use this unit’s tuner to watch
television.
To pause play
Press PAUSE.
• Press again to restart play.
When a menu screen appears on the
television
1 Press ▲▼◄► to select the item and press ENTER.
Some items can also be selected using the NUMBER keys.
To return to the menu screen
DVD-A
: Press TOP MENU.
DVD-V
: Press TOP MENU or SUB MENU.
VCD
: Press RETURN.
1 Press NUMBER keys to select the item.
e.g., 5: [0] [5] 15: [1] [5]
Front Display Disc Tray
PAUSE
PLAY/×1.3
SUB MENU
▲▼◄►
TOP MENU
STOP
NUMBER keys
OPEN/CLOSE
DVD-A VCD CDDVD-R DVD-VRAM MP3
DVD-A DVD-V
VCD
To cancel the resume function (Normal play only)
Press STOP while the unit remembers the position. (The position
is also cleared when you turn the unit off.)
Starting play from where you stopped
it (Resume Function)
DVD-A VCD CDDVD-R DVD-VRAM MP3
1 Press STOP during play.
“PLAY” flashes on the unit’s display (Normal play only). The unit
memorizes the position.
2 Press PLAY/×1.3.
Play starts from where you stopped it.
Notes:
DVD-V
DVD-A
VCD
Depending on the disc, playback may start automatically.
RAM
If cartridge protection is activated (p. 9), play begins automatically
when you close the tray.
DVD-V
DVD-A
VCD
If an interactive Disc is used, the DVD Main Menu appears.
MP3
If a menu screen is used, it is possible to playback looking at disc
tree view. (p. 47)
Notes:
• If ” appears on the screen, the operation is prohibited by the unit or
disc.
The operation is different by disc. Please follow the guidance of the
screen.
45
Disc / Card Operation
Top view
Selecting recorded programs (titles) to
play
1 Press DIRECT NAVIGATOR.
2 Press ▲▼◄► to select the title and press ENTER.
You can also select titles with the NUMBER keys.
DIRECT NAVIGATOR screen icons
:
Title protected.
:
Title that was not recorded due to recording protection (Digital
broadcasts etc.)
:
Title cannot be played because data is damaged.
:
Currently recording.
To stop play
Press STOP.
To erase a title during play (p. 52)
Press ERASE.
Press ◄► to select “Erase” and press ENTER.
To edit
See pages 51~53.
To exit the screen
Press RETURN or DIRECT NAVIGATOR.
Fast forward and rewind (Search)
1 Press ►► FF/SLOW or ◄◄ REW/SLOW during play.
On the unit, hold down ►►Ι or Ι◄◄ .
The speed increases up to 5 steps.
Press PLAY/×1.3 to restart play.
Sound is output only in the first level of fast forward. In the case of
DVD-A (except moving picture parts), CD and MP3, it is output in all
levels.
You can turn off the sound during search. (Refer to “Search Audio &
PLAY ×1.3” on page 69.)
Press PLAY/×1.3 to return to normal speed.
Skipping
1 Press SKIP ►►Ι or SKIP Ι◄◄ during play or while
paused.
On the unit, press ►►/►►Ι or Ι◄◄ /◄◄ .
Each press increases the number of skips.
• Pressing Ι◄◄ or ►►Ι while the playback control feature on Video
CDs (p. 70) is working may take you to a menu screen.
Preparation
Insert a disc that has been recorded on.
Play
SUB MENU
07 08
- -
- - - - - -
10 10/27 Mon 8 10/27 Mon
Previous Next
Select
DIRECT NAVIGATOR Title View
DVD-RAM
02/02
VIDEO PICTURE
If you enter a number larger than the total number of titles, the last
title is selected.
Skipping a minute forward (CM Skip)
1 Press CM SKIP during play.
Play restarts from approximately a minute later.
Note:
If the start of the next program is within one minute of the point you
skipped from, play restarts from the beginning of that program.
NUMBER keys
SKIP
STOP
PAUSE
DIRECT
NAVIGATOR/
TOP MENU
▲▼◄►
SUB MENU
AUDIO
CHAPTER
SLOW/SEARCH
PLAY/×1.3
ENTER
FRAME
RETURN
CM SKIP
TIME SLIP
DVD-RRAM
e.g., 5: [0] [5] 15: [1] [5]
DVD-A VCD CDDVD-R DVD-VRAM MP3
DVD-A VCD CDDVD-R DVD-VRAM MP3
DVD-RRAM
ERASE
Various Playback
PLAY/×1.3
Ι◄◄ /►►Ι
46
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Starting from a selected item
e.g., 5: [0] [5]
15: [1] [5]
MP3
e.g., 5: [0] [0] [5]
15: [0] [1] [5]
115: [1] [1] [5]
Notes:
This may not work with some discs.
This works only when stopped (screen saver is displayed on the television)
with some discs.
DVD-A
- A group number can be specified while the screen saver is displayed.
e.g., 5: [5]
- Playing bonus groups
Some discs contain bonus groups. If a password screen appears after
selecting a group, enter the password with the NUMBER keys and press
ENTER. Refer also to the disc’s jacket.
Quick View
Notes:
Output is in PCM when using a digital connection. (p. 18)
This is cancelled when you perform skip, pause, or when play reaches a
point where a program recorded in sound other than Dolby Digital starts.
This does not work if the setting is “Off” in “Search Audio & PLAY ×1.3”.
(p. 69)
This does not work when recording is in XP or FR mode during
simultaneous recording and play. (p. 42).
To return to normal speed
Press PLAY/×1.3.
Slow-motion playback
1 Press ►► FF/SLOW or ◄◄ REW/SLOW while
paused.
On the unit, hold down ►►Ι or Ι◄◄ .
When slow motion play is continued for about 5 minutes it pauses
automatically.
Notes:
The speed increases up to 5 steps.
Press PLAY to restart play.
VCD
Backward slow-motion (◄◄ ) does not work.
To return to normal speed
Press PLAY/×1.3.
Frame-by-frame viewing
1 Press FRAME ΙΙ► or FRAME ◄ΙΙ while paused.
To return to normal speed
Press PLAY/×1.3.
Notes:
Each press shows the next frame.
Press PLAY to restart play.
VCD
Backward frame-by-frame (◄ΙΙ) does not work.
Whether pictures are advanced by “Frame” or “Field” is selected
automatically. (pp. 68, 70)
Displaying the television image as a
picture-in-picture
1 Press TIME SLIP during play.
The unit displays the television image as a picture-in-picture.
You will hear the playback audio.
Press TIME SLIP again to cancel.
Time Slip becomes unavailable if any V-Chip setting is made in the
LOCK item of the SET UP.
PLAY
0 min
CH8
Play images
Current receiving images
You can change the channel being
received by pressing CH ▲▼.
You cannot change the channel being
received while recording.
Starting play from a selected title, chapter or track.
To show the play images in full
Press TIME SLIP.
Skipping the specified time (Time Slip)
1 Press TIME SLIP during play.
2 Press ▲▼ to select the time while the indication is
displayed.
The time indicator will go off after about 5 seconds, but will turn on
again when you set the indicator.
• Press ▲▼ to alter in one-minute units. Press and hold ▲▼ to alter
in 10-minute units.
3 Press ENTER.
Play skips the specified time.
PLAY
0 min
DVD-A VCD CDDVD-R DVD-VRAM MP3
1 Press NUMBER keys to select the item during play
or while stopped.
DVD-A
VCD
DVD-R
DVD-V
RAM
(Motion picture parts only)
DVD-A
VCD
DVD-R
DVD-V
RAM
(Motion picture parts only)
RAM
(Only with Dolby Digital)
The play speed can be increased without distorting the audio.
1 Press and hold PLAY/×1.3 during play.
DVD-RRAM
DVD-RRAM
Note:
DVD-R
Time Slip is not possible during recording.
47
Disc / Card Operation
G 8
T 14
TOTAL
40
/
111
MENU
0 9
No.
TREE
G 7/25
MP3 music
001 My favorite
001 Brazilian pops
002 Chinese pops
003 Czech pops
004 Hungarian pops
005 Liner notes
006 Japanese pops
007 Mexican pops
008 Philippine pops
009 Swedish pops
001 Momoko
002 Standard number
001 Piano solo
002 Vocal
TOTAL TRACK
TREE
G 1
T 1
TOTAL
1
/
111
MENU
0 9
No.
No. GROUP
Prev. Next
001 Both Ends Freezing
002 Lady Starfish
003 Life on Jupiter
004 Metal Glue
005 Paint It Yellow
006 Pyjamamama
007 Shrimps from Mars
008 Starperson
009 Velvet Cuppermine
010 Ziggy Starfish
1
2
3
4
5
6
7
8
9
10
1 : My favorite
This unit can play MP3 files recorded on CD-R/RW with a
computer. Files are treated as tracks and folders are treated as
groups.
2 Press ▲▼ to select the track and press ENTER.
Play continues to the last track in the last group.
• “
” indicates the track currently playing.
You can also select the track with the NUMBER keys.
e.g., 5: [0] [0] [5]
15: [0] [1] [5]
115: [1] [1] [5]
Selected group
To show other pages
Press ▲▼◄► to select “Prev.” or “Next” and press ENTER.
• After listing all the tracks in one group, the list for the next
group appears.
To exit the screen
Press RETURN or TOP MENU.
2 Press to display the tree screen while the file list
is displayed. Press ▲▼◄► to select a group and
press ENTER.
The file list for the group appears.
Notes:
Reading or play of the disc may take time if there are a lot of still pictures
or sessions.
The display order may differ from how the order is displayed on a
computer.
A folder which has no MP3 files is indicated in black. You cannot select
groups with no MP3 files.
You cannot select groups that contain
no compatible files.
Selected group no. /Total group no.
If the group has no track, “– –” is displayed as
group number.
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by
the unit or the disc.
Using menus to play MP3
1 Press TOP MENU during stop or play.
G: Group no.
T: Track no. in the group
TOTAL: Track no./Total track no. in all groups
002 group
001
001track.mp3
002track.mp3
003track.mp3
003 group
001track.mp3
002track.mp3
003track.mp3
001track.mp3
002track.mp3
003track.mp3
004track.mp3
(file = track
)
Root
Order of Play
(folder = group)
Naming folders and files
At the time of recording, give
folder and file names a 3-digit
numeric prefix in the order
you want them to play (this
may not work at times).
For other notes concerning the MP3, see page 11.
001track.mp3
(Or .MP3)
Extension
Note:
• Press ◄► to jump layers in the tree screen.
MP3
Using the tree screen to find a group
Using the tree screen to find a track
To erase a program that is being
played back
Since the program, and play lists (p. 57) created from it are
erased irretrievably by this procedure, you should be certain
you wish to erase before carrying it out.
1 Press ERASE during play.
A confirmation screen will be displayed.
Notes:
RAM
It is not possible to erase the program when you are carrying out
simultaneous recording and play. (p. 42)
DVD-R
The amount of space remaining on the disc does not increase
even if you erase programs.
If the confirmation screen disappears before you complete the operation,
start from the beginning again.
It is not possible to erase a title that is in the process of being recorded.
2 Press ◄► to select “Erase” and press ENTER.
Erase
Erase Cancel
Time remaining after erase 2:40(EP)
Corresponding play list chapters will be erased.
You can erase titles while playing.
DVD-RRAM
48
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Create chapters
1 Press CHAPTER during play.
“CHAPTER” lights on the Front Display for a few seconds.
• Press SKIP ►►Ι or SKIP Ι◄◄ to skip to the start of a chapter.
You cannot activate this function when recording and playing at the
same time.
Notes:
You can play and edit the created chapters. (pp. 51~53, 57~59)
For other notes concerning the chapter, see page 51.
e.g., DVD-RAM “LR”
is selected
e.g.,
DVD-V
English is selected language.
PLAY
LR
DVD-RAM
Soundtrack
1 ENG Digital 3/2.1ch
LR L R
While playing DVD-RAM or Video CD
RAM
If it is a recording of an SAP broadcast, each time you press
AUDIO:
MAIN SAP
Notes:
The audio cannot be changed while Time Slip is used.
RAM
You may be unable to change the audio when you have connected
the unit to an AV receiver through the DIGITAL AUDIO OUT terminal and
“Dolby Digital” is set to “Bitstream”. If this occurs:
- Change “Dolby Digital” to “PCM” or “Bitstream”. (p. 69)
- Connect also with an audio cable (pp. 18~19) and change the input on
the receiver.
You can change the audio channel number each time you press
the button. This allows you to change things like the soundtrack
language.
RAM
While playing DVD-Audio or DVD-Video
Changing audio during play
1 Press AUDIO.
How the type changes depends on when you press the button.
You can change the audio being received or played.
DVD-A VCDDVD-VRAM
49
Disc / Card Operation
Front view
Common procedures
1 Press PLAY SETUP in play mode.
To clear the on-screen menus
Press RETURN.
Disc menu
Disc
Play
Sound track
Subtitle
1
OFF
Audio channel
LR
Digital 2/0 ch
Menu Item Setting
2 Press ▲▼ to select the menu and press .
3 Press ▲▼ to select the item and press .
4 Press ▲▼ to select the setting.
Notes:
The screens depend on the disc contents.
Depending on the disc contents, there are some items that you cannot
select or change.
Disc
Play
Sound track
Subtitle
1
OFF
Audio channel
LR
Digital 2/0 ch
e.g., DVD-RAM
Not available when playing CDs and MP3 discs.
Sound track
Sound track language
DVD-A
DVD-V
See
A
below.
Audio attribute
RAM
DVD-R
DVD-A
DVD-V
See
B
on next page.
Karaoke vocal, on and off
DVD-V
Solo:
Duet:
Subtitle
Subtitle language
DVD-A
DVD-V
See
A
below.
Changing the subtitle language is only possible with discs on which
two or more subtitle languages are recorded.
Any change must be made from the menu recorded on the disc.
(Not available on all discs.)
Subtitle on/off
RAM
DVD-R
DVD-A
DVD-V
Turn the Subtitle ON or OFF.
Angle
Angle number
DVD-A
DVD-V
Changing the angle is only possible with discs on which two or
more angles are recorded.
Any change must be made from the menu recorded on the disc.
(Not available on all discs.)
STILL-P
Page
Still picture number
DVD-A
When “Return” is displayed:
Select “Return” and press ENTER to return to the
default page.
When “RANDOM” is displayed:
Select “RANDOM” and press ENTER, the picture
changes randomly each time you press ENTER.
Slide
Show
Plays according to the default order on the disc.
DVD-A
Audio channel
Audio channel
RAM
VCD
Select the audio channel. (p. 48)
PBC
Playback control on/off
VCD
Indicates whether menu play (playback control) is on or off.
A
Sound track/subtitle language
ENG: English SVE: Swedish CHI: Chinese
FRA: French NOR: Norwegian KOR: Korean
DEU: German DAN: Danish MAL: Malay
ITA: Italian POR: Portuguese VIE: Vietnamese
ESP: Spanish RUS: Russian THA: Thai
NLD: Dutch JPN: Japanese *: Others (pp. 67~69)
▲▼◄►
RETURN
PLAY SETUP
Using On-screen Menus
DVD-A VCDDVD-R DVD-VRAM
OFF
ON
V1+V2
OFF
V1 V2
(Continued on next page.)
e.g., DVD-RAM
NUMBER keys
ENTER
50
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
B
Sound track/subtitle language
Notes:
When playing back recordings of SAP broadcasts, “1+1 ch” will be
displayed.
You can only select subtitles, soundtracks, and angles if they are recorded
on the disc.
Some discs allow changes to soundtracks, subtitles, and angles only by
using the disc’s menus.
If the subtitles overlap closed captions recorded on discs, turn the subtitles
off.
LPCM/PPCM/ Digital/DTS/MPEG: Signal type
k (kHz): Sampling frequency
b (bit): Number of bits
ch (channel): Number of channels
e.g., 3/2 .1ch
.1: Subwoofer signal (not displayed if there is no
subwoofer signal)
0:
1:
2:
No surround
Mono surround
Stereo surround (left/right)
1:
2:
3:
Center
Front left + Front right
Front left + Front right + Center
Play menu
Disc
Play
Repeat play
OFF
e.g., DVD-RAM
Repeat play
Each time you press ▲▼:
RAM
DVD-V
DVD-R
Title
Chapter OFF
VCD
CD
Track
All OFF
DVD-A
MP3
Track
Group OFF
While playing a play list:
RAM
PL (Play list)
OFF
Select “OFF” to cancel.
Notes:
You cannot use repeat play to repeat an entire DVD-Audio, DVD-Video,
MP3 discs or all the play lists on a DVD-RAM.
Repeat play does not work if the disc’s elapsed play time is not shown on
the unit’s display.
ERASE does not work while in repeat play mode.
If the Video CD has playback control
1. While stopped (the screen saver is on the television), press
the NUMBER keys to select a track. (p. 46)
2. Select the repeat mode.
DVD-A VCD CDDVD-R DVD-VRAM MP3
51
Disc / Card Operation
Top view
Play
SUB MENU
07 08
- -
- - - - - -
10 10/27 Mon 8 10/27 Mon
Previous Next
Select
DIRECT NAVIGATOR Title View
DVD-RAM
02/02
VIDEO PICTURE
Title/Chapter
Programs are recorded as a single title consisting of one
chapter.
Title
Chapter
Start End
RAM
You can divide a title into multiple chapters. (See
“Create Chapter” on page 48, “Divide Chapter” on page 53.)
Chapter Chapter Chapter Chapter
Title
RAM
You can change the order of chapters and create a
play list.
DVD-R
Titles are divided into about 5-minute chapters after
finalizing. (p. 62)
The maximum number of items on a disc:
• Titles: 99
Chapters: Approximately 1 000 (Depends on disc contents.)
Notes:
Once erased or partially erased, it cannot be restored to its original state.
Make certain before proceeding.
You cannot edit during recording.
Editing titles/chapters and playing
chapters
1 Press DIRECT NAVIGATOR.
RAM
Press ▲▼◄► to select “VIDEO”. If you play still pictures,
press ▲▼◄► to select “PICTURE”. (p. 54)
2 Press ▲▼◄► to select the title.
• You can also select a title by entering a 2-digit number with the
numeric buttons.
3 Press SUB MENU, then ▲▼ to select the operation
and press ENTER.
If you select “Edit”, press ▲▼ to select the operation and press
ENTER.
To show other pages
Press ▲▼◄► to select “Previous” or “Next” and press ENTER.
• You can also press SKIP ►►Ι or SKIP Ι◄◄ to show other
pages.
Multiple editing
Select with ▲▼◄► and press (PAUSE). (Repeat.)
A check mark appears. Press (PAUSE) again to cancel.
Refer to “Title
operations”.
If you select “Chapter View”.
Preparation
Release protection before proceeding:
- Cartridge (p. 9)
RAM
- Disc (p. 60)
RAM
RAM
When the title is protected (p. 52), you can only access
“Properties” and “Cancel Protection”. Release the protection to access
other items.
Enter Name
Set up Protection
Cancel Protection
Shorten
Change Thumbnail
Divide Title
Erase
Properties
Edit
Chapter View
SKIP
PLAY/×1.3
ENTER
RETURN
▲▼◄►
SUB MENU
PAUSE
DIRECT
NAVIGATOR
DVD-RRAM
DIRECT NAVIGATOR Chapter View
DVD-RAM
VIDEO PICTURE
Play
SUB MENU Select
Previous Next
- - - - - - - -- - - -- - - -
- - - - - - - -- - - -- - - -
- - - - - - - -- - - -
01/01
0001
08 8 10/27 Mon
4 Press ▲▼◄► to select the chapter.
• You can also select a chapter by entering a 3-digit number with the
numeric buttons.
To start play
Press ENTER.
To edit
Go to Step 5 on next page.
To show other pages/Multiple editing (see above)
(Continued on next page.)
e.g., 5: [0] [5]
15: [1] [5]
e.g., 5: [0] [0] [5]
15: [0] [1] [5]
115: [1] [1] [5]
If you enter a number larger
than the total number of
chapters, the last chapter is
selected.
If you enter a number larger
than the total number of titles,
the last title is selected.
Editing the Recorded Programs (Using the Direct Navigator)
PLAY/×1.3
Ι◄◄ /►►Ι
52
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Erase Chapter
Divide Chapter
Combine Chapters
Title View
5 Press SUB MENU, then ▲▼ to select the operation
and press ENTER.
You can go back to the Title View.
To exit the screen
Press DIRECT NAVIGATOR.
To return to the previous screen
Press RETURN.
Refer to “Chapter
operations”.
Title operations
DIRECT NAVIGATOR Shorten
DVD-RAM
VIDEO PICTURE
08
End
- - : - - . - -
Start
- - : - - . - -
Start
End
Next
Exit
0:43.21
Shorten
Dinosaur
Erase Cancel
Time remaining after erase 1:33(EP)
Corresponding play list chapters will be erased.
Erase
The title is irretrievably erased when you use this procedure and
cannot be retrieved. Check the title carefully before erasing to
ensure it isn’t one you want to keep.
2 Press ◄► to select “Erase” and press ENTER.
Notes:
The disc’s available recording time may not increase after erasing short
titles.
The available recording time on DVD-R does not increase when you erase
titles.
07 08
- -
- - - - - -
10 10/27 Mon 8 10/27 Mon
Previous Next
DIRECT NAVIGATOR Title View
DVD-RAM
02/02
VIDEO PICTURE
Erase
Dinosaur
Erase Cancel
Time remaining after erase 2:40(EP)
Corresponding play list chapters will be erased.
Properties
DVD-RRAM
Information (e.g., recording time) is shown.
DVD-RRAM
(Multiple editing is possible. (p. 51))
07 08
- -
- - - - - -
10 10/27 Mon 8 10/27 Mon
Previous Next
DIRECT NAVIGATOR Title View
DVD-RAM
02/02
VIDEO PICTURE
Dinosaur
Properties
No. 01
Date 6/23/2004 Wed
CH 4
Start 10:00 AM
Rec time 2:15(SP)
Note:
The full name is shown in the “Properties” screen, but if you enter a long
name, only part of it is shown in the title list.
Edit Enter Name
DVD-RRAM
Refer to “Entering text” on page 63.
Edit Set up Protection/Cancel Protection
RAM
(Multiple editing is possible. (p. 51))
If set, this will protect the title from accidental erasure.
2 Press ◄► to select “Yes” and press ENTER.
The lock symbol “ ” appears when the title is protected.
07 08
- -
- - - - - -
10 10/27 Mon 8 10/27 Mon
Previous Next
DIRECT NAVIGATOR Title View
DVD-RAM
02/02
VIDEO PICTURE
Set up Protection
Yes No
Set title protection.
07 08
- - - -
10 10/27 Mon 8 10/27 Mon
DIRECT NAVIGATOR Title View
DVD-RAM
Note:
Titles will be erased even if they are protected if you format the disc with
DISC SETTING. (p. 61)
Edit Shorten
RAM
2 Press ENTER at the start point and end point of the
section you want to erase.
See “For quicker editing” on page 53.
3 Press ▲▼ to select “Exit” and press ENTER.
Select “Next” and press ENTER to erase other
sections.
You can remove unnecessary parts of the recording such as
commercials.
The program segment, and play list scenes created from it, are erased
irretrievably when you use this procedure. Check carefully before
proceeding.
DIRECT NAVIGATOR Shorten
DVD-RAM
VIDEO PICTURE
PLAY08
End
- - : - - . - -
Start
- - : - - . - -
Start
End
Next
Exit
0:43.21
4 Press ▲◄ to select “Erase” and press ENTER.
To erase another part of the same title
After storing the point in “Start” and “End”, select “Next” in Step 2
and perform Step 4, then repeat Steps 2~4.
Notes:
You may not be able to specify start and end points within 3 seconds of
each other.
You cannot specify start and end points if the picture recorded is stilled.
The unit pauses when the title reaches its end during this procedure.
The disc’s available recording time may not increase after erasing short
parts of titles.
1 Do Steps 1~3 on page 51.
53
Disc / Card Operation
For quicker editing
Use search (p. 45), Time Slip (p. 46) or slow-motion (p. 46) to find the
desired point.
• Press SKIP ►►Ι or SKIP ׀◄◄ to skip to the end of a title.
Chapter operations
DIRECT NAVIGATOR Chapter View
DVD-RAM
VIDEO PICTURE
Previous Next
- - - - - - - -- - - -- - - -
- - - - - - - -- - - -- - - -
- - - - - - - -- - - -
01/01
0001
08 8 10/27 Mon
Erase Chapter
Erase Cancel
Corresponding play list chapters will be erased.
DIRECT NAVIGATOR Divide Chapter
DVD-RAM
VIDEO PICTURE
08 PLAY
Divide
Exit
0:00.01
DIRECT NAVIGATOR Chapter View
DVD-RAM
VIDEO PICTURE
Previous Next
- - - - - - - -- - - -- - - -
- - - - - - - -- - - -- - - -
- - - - - - - -- - - -
01/01
0001
08 8 10/27 Mon
Combine Chapters
Combine Cancel
Selected Chapter Following Chapter
Combine chapters.
001 002
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by
the unit or the disc.
Edit Change Thumbnail
DVD-RRAM
You can change an image to be shown as a thumbnail picture in
the Title View.
2 Press PLAY/×1.3 to start play.
3 Press ENTER when the image you want to use as a
thumbnail is shown.
See “For quicker editing” below.
To change to another point in the same title:
Select “Change” with ▲▼ and press PLAY/×1.3, and then repeat
Steps 3~4.
4 Press ▲▼ to select “Exit” and press ENTER.
The displayed scene is changed at this point.
DIRECT NAVIGATOR Change Thumbnail
DVD-RAM
VIDEO PICTURE
08
Change
00:00.01
Change
Exit
0:00.01
Edit Divide Title
RAM
You can divide a selected title into two. You must make sure when
dividing a title because it cannot be recovered after the procedure.
3 Press ▲▼ to select “Exit” and press ENTER.
2 Press ENTER at the point you want to divide the
title.
See “For quicker editing” below.
To confirm the division point:
Press ▲▼ to select “Preview” and press ENTER. (Play will begin
from a point 10 seconds prior to and after the division point.)
To change the division point:
Press ▲▼ to select “Divide” and press ENTER at the point you want
to change.
DIRECT NAVIGATOR Divide Title
DVD-RAM
VIDEO PICTURE
08 PLAY
Divide
- - : - - . - -
Preview
Divide
Exit
0:00.01
Notes:
The divided titles retain the name of the original title. They also retain the
CPRM property (p. 70) of the original.
Use search and slow-motion to find the points.
It is not possible to carry out “Divide” in the following cases:
- When the resulting part(s) are extremely short.
- When the total number of titles is more than 99.
DIRECT NAVIGATOR Divide Title
DVD-RAM
VIDEO PICTURE
08
Divide
- - : - - . - -
Preview
Divide
Exit
0:00.01
Divide Title
Dinosaur
Divide Cancel
Once divided, this title cannot be
recombined.
4 Press ◄► to select “Divide” and press ENTER.
The title is divided at the point.
1 Do Steps 1~5 on pages 51~52.
2 Press ◄► to select “Erase” and press ENTER.
Even if you erase the chapter, the original title is not erased.
Erase Chapter
RAM
(Multiple editing is possible. (p. 51))
RAM
Divide Chapter
3 Press ▲▼ to select “Exit” and press ENTER.
A little portion of the recording directly preceding the division point
may be lost.
2 Press ENTER at the point you want to divide.
See “For quicker editing” below.
Repeat this step to divide at other points.
Notes:
The divided chapters retain the name of the original title. They also retain
the CPRM property (p. 70) of the original.
It is not possible to carry out “Divide”, when the resulting part(s) are
extremely short.
RAM
Combine Chapters
2 Press ◄► to select “Combine” and press ENTER.
The selected chapter and next chapter are combined.
54
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Front view
DIRECT NAVIGATOR Select Folder
PICTURE
SUB MENU Select
SD CARD
Previous Next
01/01
Picture 0022 File 0023
\
DCIM
\
DCIM
\
100
_
PANA
001 100
_
PANA
002 101
_
PANA
003 102
_
PANA
- - -
- - -
- - -
- - -
- - -
0002
- - - - - - - -- - - -- - - -
001/001
Folder 100_PANA
Previous Next
00030001 0004
0006 0007 00080005
DIRECT NAVIGATOR Picture(JPEG) View
PICTURE
SD CARD
Editing and Playing Still Pictures (Using the Direct Navigator)
Playing still pictures on the Card or
DVD-RAM
4 Press ▲▼◄► to select the still picture and press
ENTER.
You can also select titles with the NUMBER keys.
To stop playing
Press STOP.
To exit the screen
Press DIRECT NAVIGATOR.
1 Insert a DVD-RAM or Card. (p. 34)
2 Press SD or DVD to select the drive.
3 Press DIRECT NAVIGATOR.
RAM
Press ▲▼◄► to select “PICTURE” tab and press ENTER.
e.g., Card
5 Press ▲▼◄► to select “Folder” then press ENTER.
6 Press ▲▼ to select the folder, and press ENTER.
You can also select titles with the NUMBER keys.
0002
- - - - - - - -- - - -- - - -
001/001
Folder 100_PANA
Previous Next
00030001 0004
0006 0007 00080005
DIRECT NAVIGATOR Picture(JPEG) View
Play
SUB MENU Select
PICTURE
SD CARD
RAM SD
Play
SUB MENU
07 08
- -
- - - - - -
10 10/27 Mon 8 10/27 Mon
Previous Next
Select
DIRECT NAVIGATOR Title View
DVD-RAM
02/02
VIDEO PICTURE
0002
- - - - - - - -- - - -- - - -
001/001
Folder 100_PANA
Previous Next
00030001 0004
0006 0007 00080005
DIRECT NAVIGATOR Picture(JPEG) View
Play
SUB MENU Select
DVD-RAM
VIDEO PICTURE
e.g., DVD-RAM
e.g., 5: [0] [0] [0] [5]
15: [0] [0] [1] [5]
115: [0] [1] [1] [5]
1115: [1] [1] [1] [5]
• Press ◄► to display the previous or next picture.
Useful functions during still picture play. (p. 55)
To select the sill pictures in another
folder
If there is a multiple number of higher folders recognizable, you can switch
them using ◄►.
e.g., 5: [0] [0] [5]
15: [0] [1] [5]
115: [1] [1] [5]
To display information about the Still
Pictures
1 Press DISPLAY twice while in still picture display.
If “SD Card” or “DVD-RAM” is displayed at the upper right, press
DISPLAY once.
6/10 1:03 PM Folder-Picture No.100-0841
Date 12/25/2004
No. 10/ 22
Folder number
File number
To exit the picture properties screen
Press DISPLAY.
Shooting data
Note:
Still pictures cannot be played during recording.
NUMBER keys
SKIP
STOP
DIRECT
NAVIGATOR
▲▼◄►
SUB MENU
ERASE
DISPLAY
RETURN
ENTER
SD
DVD
Disc Tray SD Card Slot
PAUSE
55
Disc / Card Operation
Useful functions during still picture
play
RAM SD
1 Press ▲▼◄► to select a picture in the DIRECT
NAVIGATOR screen and press ENTER.
The selected picture is displayed in full screen.
2 Press SUB MENU.
Rotate
3 Press ▲▼ to select “Rotate RIGHT” or “Rotate
LEFT,” and press ENTER.
Rotate RIGHT:
Picture is rotated 90° clockwise.
Rotate LEFT:
Picture is rotated 90° counterclockwise.
Note:
Rotation information will not be stored.
Rotate RIGHT
Rotate LEFT
e.g., When you select
“Rotate RIGHT”
Zoom in/Zoom out
(Only for a still picture with a low pixel count)
1 Press ▲▼◄► to select a picture in the DIRECT
NAVIGATOR screen and press ENTER.
The selected picture is displayed in full screen.
2 Press SUB MENU.
Rotate RIGHT
Rotate LEFT
Zoom in
1 Press ERASE during play.
2 Press ◄► to select “Erase” and press ENTER.
(p. 56)
Once erased, the recorded contents are lost and cannot be restored.
Make certain before proceeding.
Erase
Editing Still Pictures
Preparation
Release protection before proceeding:
- Cartridge (p. 9)
RAM
- Disc (p. 60)
RAM
- Write Protect (p. 11)
SD
When the picture is protected (p. 56), you can only access “Properties”
and “Cancel Protection”. Release the protection to access other items.
1 Press SD or DVD to select the drive.
2 Press DIRECT NAVIGATOR.
RAM
Press ▲▼◄► to select “PICTURE” tab and press ENTER.
RAM SD
3 Press ▲▼◄► to select the picture.
The selected picture is marked with a frame.
e.g., Card
To show other pages
Press ▲▼◄► to select “Previous” or “Next” and press ENTER.
• You can also press SKIP ►►Ι or SKIP Ι◄◄ to show other
pages.
Multiple editing
Select with ▲▼◄► and press (PAUSE). (Repeat.)
A check mark appears. Press (PAUSE) again to cancel.
To select the still pictures in another folder
See page 54.
4 Press SUB MENU, then ▲▼ to select the operation
and press ENTER.
0002
- - - - - - - -- - - -- - - -
001/001
Folder 100_PANA
Previous Next
00030001 0004
0006 0007 00080005
DIRECT NAVIGATOR Picture(JPEG) View
Play
SUB MENU Select
PICTURE
SD CARD
Erase Picture
Set up Protection
Cancel Protection
DPOF
Start Slide Show
Slide Interval
Refer to “Picture and
folder operations” on
next page.
To exit the screen
Press DIRECT NAVIGATOR.
To return the previous screen
Press RETURN.
3 Press ▲▼ to select “Zoom in” and press ENTER.
To return the picture to its original size, press ▲▼ to select “Zoom
out” in step 3 and press ENTER.
When zooming in, the picture may be cut off.
The enlargement information will not be stored.
56
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
DIRECT NAVIGATOR Picture(JPEG) View
PICTURE
SD CARD
0002
- - - - - - - -- - - -- - - -
001/001
Folder 100_PANA
Previous Next
00030001 0004
0006 0007 00080005
Set up Protection
Yes No
Set up protection to the picture(JPEG).
0002
Folder 100_PANA
0001
00060005
DIRECT NAVIGATOR Picture(JP
E
SD CARD
DIRECT NAVIGATOR Picture(JPEG) View
PICTURE
SD CARD
0002
- - - - - - - -- - - -- - - -
001/001
Folder 100_PANA
Previous Next
00030001 0004
0006 0007 00080005
DPOF
Press ENTER to comfirm.
Set up DPOF on the picture(JPEG).
The contents set with other units will be erased.
Number of prints 1
DIRECT NAVIGATOR Picture(JP
E
SD CARD
0002
Folder 100_PANA
0001
00060005
1
Erase Picture/Erase Whole Folder
You can delete still pictures (JPEG) from a Card or DVD-RAM.
2 Press ◄► to select “Erase” and press ENTER.
DIRECT NAVIGATOR Picture(JPEG) View
PICTURE
SD CARD
0002
- - - - - - - -- - - -- - - -
001/001
Folder 100_PANA
Previous Next
00030001 0004
0006 0007 00080005
Erase Picture
Erase Cancel
Erase the picture(JPEG)?
Notes:
The locked picture cannot be erased.
Once erased, the recorded contents are lost and cannot be restored. Make
certain before proceeding.
When erasing a folder, even the files not containing still pictures will also
be erased if they are inside the folder. (This does not apply to folders
under the folder concerned.)
RAM SD
(Multiple editing is possible. (p. 55))
Set up Protection/Cancel Protection
RAM SD
(Multiple editing is possible. (p. 55))
2 Press ◄► to select “Yes” and press ENTER.
The lock symbol “ ”appears when the still picture is protected.
If set, this will protect the still picture from accidental erasure.
DPOF
SD
(Multiple editing is possible. (p. 55))
You can select a whole folder or individual pictures for printing and
specify the number of prints to be made. “DPOF” means Digital
Print Order Format.
2 Press ◄► to select number of print (0 to 9) and
press ENTER.
• “ ” mark is displayed.
This appears on the still pictures inside a folder when you make the
DPOF setting for the folder.
Start Slide Show/Slide Interval
RAM SD
To change the display timing
Press ▲▼ to select “Slide Interval” and press ENTER.
Press ◄► to select the desired timing (0–30 seconds) and
press ENTER.
• To cancel Slide Show, press STOP.
You can display still pictures one by one with constant interval.
Picture and folder operations
1 Do Steps 1~4 on page 55 to edit still picture or do
Steps 1~4 above to edit folder.
To cancel the print setting
Set the number of print to “0”.
Notes:
When this is set by this unit, any settings established by other units will be
released.
Print settings (DPOF) made using this unit may not be viewable on other
equipment.
Settings cannot be made for folders and files not in accordance with DCF
standards or if there is no remaining space on the card.
0002
- - - - - - - -- - - -- - - -
001/001
Folder 100_PANA
Previous Next
00030001 0004
0006 0007 00080005
DIRECT NAVIGATOR Picture(JPEG) View
Play
SUB MENU Select
PICTURE
SD CARD
Editing still pictures folders
3 Press ▲▼ to select the Folder.
To show other pages/Multiple editing. (p. 55)
4 Press SUB MENU, then press ▲▼ to select the
operation and press ENTER.
To select another higher folder. (p. 54)
Erase Whole Folder
Folder Name
Set Protection
Cancel Protection
DPOF
1 Do Steps 1~2 (see “Editing Still Pictures”) on page
55.
2 Press ▲▼◄► to select “Folder” and press ENTER.
To exit the screen
Press DIRECT NAVIGATOR.
To return the previous screen
Press RETURN.
Note:
Even if the protection setting is used by this unit to protect a folder, the
folder may be erased by another unit.
Refer to “Picture and
folder operations”
below.
Folder Name
RAM SD
You can give names to still picture folders.
Refer to “Entering text” on page 63.
Folder names inputted using this unit may not be displayed on other
equipment.
57
Disc / Card Operation
Top view
PLAY LIST Create
DVD-RAM
SUB MENU Press RETURN to exit.
08 8 10/27 Mon
Source Title 01/01
001/001
Chapters in PLAY LIST
- - - - - -
- -
- - -
- -
- - -
0201
Source Chapter
001 002
- - -
003
001/001
- - - -
- - - - - -
- -
Create
Previous Next
PLAY LIST Play List View
DVD-RAM
01/01
You can create a play list by gathering your favorite chapters
(p. 51) from your recordings. You can also edit the created play
list.
Editing play lists doesn’t modify the recording data.
Play lists are not recorded separately so this doesn’t use much capacity.
The maximum number of items on a disc:
Play lists: 99
Chapters in play lists: Approximately 1 000 (Depends on disc contents.)
2 Press ENTER.
3 Press ▲▼◄► to select “PLAY LIST” and press
ENTER.
4 Press ▲▼◄► to select “Create” and press ENTER.
Creating play lists
MENU
ADJ. SET UP FUNC.
DVD/SD
OK
PAGE
RETURN
(Continued on next page.)
Preparation
Release protection before proceeding:
- Cartridge (p. 9)
- Disc (p. 60)
Press DVD to select the DVD drive.
DVD
SD
Play back
Record
Dubbing
/ Edit
Set up
DISC PROTECTION OFF
CARTRIDGE PROTECTION OFF
DVD-RAM
DIRECT NAVIGATOR
TIMER RECORDING
DUBBING
PLAY LIST
SETUP
FLEXIBLE RECORDING
DISC SETTING
SKIP
STOP
MENU
ENTER
RETURN
▲▼◄►
SUB MENU
ERASE
PAUSE
RAM
5 Press ◄► to select the source title and press .
When you want to select all chapters in the title:
• Press ◄► to select the source title and press ENTER, then
skip to Step 7.
• Repeat Steps 5~7 to add other titles or chapters.
PLAY LIST Create
DVD-RAM
SUB MENU Press RETURN to exit.
08 8 10/27 Mon
Source Title 01/01
001/001
Chapters in PLAY LIST
- - - - - -
- -
- - -
- -
- - -
0201
001/001Source Chapter
001 002
- - -
003
6 Press ◄► to select the chapter you want to add to a
play list and press ENTER.
• Press to cancel.
1 Press MENU in Stop mode, then press ◄► to select
“FUNC.”
You can also create a new chapter from the source title. Press
SUB MENU to select “Divide Chapter” and press ENTER. (Refer to
“Divide Chapter” on page 53.)
Title
Chapter Chapter Chapter
Chapter Chapter
Chapter Chapter
Play list
Title
NUMBER keys
Using Play List
STOP
Ι◄◄ /►►Ι
58
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Play
SUB MENU Select
PLAY LIST Play List View
DVD-RAM
- -
- - - - - -
- -
Create
Previous Next
01/01
07
10/27 Mon 0:30
PLAY LIST Create
DVD-RAM
Press RETURN to exit.
08 8 10/27 Mon
Source Title 01/01
001/001
Chapters in PLAY LIST
- - - - - -
- -
- - -
- -
- - -
0201
001/001Source Chapter
001 002
- - -
003
To stop partway through
Press RETURN.
To clear the play list screen
Press RETURN.
5 Press SUB MENU, then ▲▼ to select the operation
and press ENTER.
If you select “Edit”, press ▲▼ to select the operation and press
ENTER.
Refer to
“Play list
operations”.
7 Press ◄► to select the position to insert the
chapter and press ENTER.
Repeat steps 6~7 to add other chapters.
• Press to select other source titles.
8 Press RETURN.
Create
Copy
Enter Name
Change Thumbnail
Erase
Properties
Edit
Chapter View
1 Press MENU in Stop mode, then press ◄► to select
“FUNC.”
2 Press ENTER.
3 Press ▲▼◄► to select “PLAY LIST” and press
ENTER.
4 Press ▲▼◄► to select the play list and press
ENTER.
You can also select a play list from the play list view by entering a
2-digit number with the numeric buttons.
MENU
ADJ. SET UP FUNC.
DVD/SD
OK
PAGE
RETURN
DVD
SD
Play back
Record
Dubbing
/ Edit
Set up
DISC PROTECTION OFF
CARTRIDGE PROTECTION OFF
DVD-RAM
DIRECT NAVIGATOR
TIMER RECORDING
DUBBING
PLAY LIST
SETUP
FLEXIBLE RECORDING
DISC SETTING
Preparation:
Create play lists first. (p. 57)
DVD-RAM
Play
SUB MENU Select
PLAY LIST Chapter View
Previous Next
- - - - - -- - -- - -
- - - - - -- - -- - -
- - -- - -
01/01
001
08 10/27 Mon 0:30
002
If you select “Chapter View”
6 Press ▲▼◄► to select the chapter.
• You can also select a chapter by entering a 3-digit number with the
numeric buttons.
Note:
You may not be able to specify start and end points if the material is still
pictures recorded on other equipment.
Playing play lists
e.g., 5: [0] [5]
15: [1] [5]
Whenever a number greater than the total number of play lists is
entered, “Create” is selected.
To show other pages
Press ▲▼◄► to select “Previous” or “Next” and press ENTER.
• You can also press SKIP ►►Ι or SKIP Ι◄◄ to show other
pages.
To stop play list play
Press STOP. (The play list appears.)
To erase a play list during play (p. 59)
Press ERASE.
Press ◄► to select “Erase” and press ENTER.
Using play list to edit play list/chapters
You can use fast-forward, rewind, pause, and slow-motion while playing
chapters just as you can during normal play.
Multiple editing
Select with ▲▼◄► and press (PAUSE). (Repeat.)
A check mark appears. Press (PAUSE) again to cancel.
To play a chapter
Press ENTER.
To stop chapter play
Press STOP. (The chapter view appears.)
To erase a chapter
Press ERASE.
Press ◄► to select “Erase” and press ENTER.
To show other pages/Multiple editing (see above)
If you enter a number larger
than the total number of
chapters, the last chapter is
selected.
e.g., 5: [0] [0] [5]
15: [0] [1] [5]
115: [1] [1] [5]
59
Disc / Card Operation
PLAY LIST Play List View
DVD-RAM
- -
- - - - - -
- -
Create
Previous Next
01/01
07
10/27 Mon 0:30
Erase
Erase Cancel
Erase Play List?
DVD-RAM
PLAY LIST Move Chapter
Previous Next
- - - - - -- - -- - -
- - - - - -- - -- - -
- - -- - -
01/01
001
08 10/27 Mon 0:30
002
To exit the screen
Press RETURN.
To return to the previous screen
Press RETURN.
Chapter operations
7 Press SUB MENU, then ▲▼ to select the operation
and press ENTER.
Refer to “Chapter
operations”.
You can go back to PLAY LIST View.
Add Chapter
Move Chapter
Divide Chapter
Combine Chapters
Erase Chapter
Play List View
Play list operations
PLAY LIST Play List View
DVD-RAM
- -
- - - - - -
- -
Create
Previous Next
01/01
10/27 Mon 0:30
07
Dinosaur
Properties
No. 01
Chapters 001
Date 6/23/2004 Wed
Time 2:26.40
PLAY LIST Play List View
DVD-RAM
- -
- - - - - -
- -
Create
Previous Next
01/01
07
10/27 Mon 0:30
Copy
Copy Cancel
Copy this Play List?
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by
the unit or the disc.
1 Do Steps 1~5 on page 58.
RAM
(Multiple editing is possible. (p. 58))
Erase
2 Press ◄► to select “Erase” and press ENTER.
The play list is erased.
Once a play list has been erased, it is irretrievable. Check carefully
before proceeding.
Properties
Play list information (e.g., time and date) is shown.
RAM
Edit Create
Refer to “Creating play lists” on pages 57~58.
2 Press ◄► to select “Copy” and press ENTER.
Edit Copy
RAM
(Multiple editing is possible. (p. 58))
RAM
Edit Enter Name
Refer to “Entering text” on page 63.
RAM
Note:
The full name is shown in the “Properties” screen, but if you enter a long
name, only part of it is shown in the play list screen.
Edit Change Thumbnail
Refer to “Change Thumbnail” on page 53.
RAM
Add Chapter
Refer to “Creating Play lists”, Step 5~8 on pages 57~58.
1 Do Steps 1~7 on pages 58~59.
RAM
2 Press ▲▼◄► to select the position to insert the
chapter and press ENTER.
The chapter is moved and inserted before the highlighted chapter.
Move Chapter
RAM
Divide Chapter
Combine Chapters
Erase Chapter
RAM
RAM
RAM
(Multiple editing is possible. (p. 58))
Refer to “Divide Chapter“ on page 53.
Refer to “Combine Chapters“ on page 53.
Refer to “Erase Chapter“ on page 53.
60
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Top view
DVD
SD
Play back
DISC PROTECTION
CA
RTRIDGE PROTE
DOCUMENTARY
DVD-RAM
DIRECT NAVIGATOR
DVD
SD
Play back
Record
Dubbing
/ Edit
Set up
DISC PROTECTION OFF
CARTRIDGE PROTECTION OFF
DVD-RAM
DIRECT NAVIGATOR
TIMER RECORDING
DUBBING
PLAY LIST
SETUP
FLEXIBLE RECORDING
DISC SETTING
Preparation
Press SD or DVD to select the drive.
Release protection before proceeding:
- Cartridge (p. 9)
RAM
- Disc (p. 60)
RAM
- Write Protect (p. 11)
SD
4 Press ▲▼ to select the operation and press ENTER.
After this operation, follow the desired operation.
Disc Name
1 Press MENU in Stop mode, then press ◄► to select
“FUNC.”
2 Press ENTER.
3 Press ▲▼◄► to select “DISC SETTING” or “CARD
SETTING” and press ENTER.
MENU
ADJ. SET UP FUNC.
DVD/SD
OK
PAGE
RETURN
e.g., DVD-RAM
1 Press ▲▼ to select “Disc Name” and press ENTER
in Step 4 above.
2 Refer to “Entering text” on page 63.
The disc name is displayed in the DVD Functions window.
e.g., DVD-RAM
DVD
SD
ENTER
RETURN
▲▼◄►
MENU
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc
Titles 11
Used 0:22
Free 5:38(EP)
DVD-RAM
On
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc
Titles 11
Used 0:22
Free 5:38(EP)
DVD-RAM
On
Disc Protection
This allows you to protect discs from accidental erasure.
The lock symbol “ ”appears closed when
the disc is write-protected.
1 Press ▲▼ to select “Disc Protection” and press
ENTER in Step 4 above.
2 Press ◄► to select “Yes” and press ENTER.
Erase all titles
All titles and play lists created from them will be erased irretrievably when
you use this procedure. Check carefully before proceeding.
1 Press ▲▼ to select “Erase all titles” and press
ENTER in Step 4 above.
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc
Titles 11
Used 0:22
Free 5:38(EP)
DVD-RAM
On
Disc Protection
Yes No
Set up Disc Protection.
DVD-RRAM SD
To stop partway
Press RETURN.
DVD-RRAM
RAM
RAM
Disc Setting / Card Setting
DVD/SD
61
Disc / Card Operation
3 Press ◄► to select “Start” and press ENTER.
All titles and play lists are erased.
Notes:
Computer data and still pictures (JPEG, TIFF) cannot be erased.
Erase does not work if one or more programs are protected.
Format Disc/Format Card
(Refer to “Formatting” on page 70.).
Notes:
Formatting erases all contents on the disc, including computer data. Check
carefully before proceeding.
Some DVD-RAM are unformatted. Format them before using them in this
unit. Formatting also allows you to erase the entire contents of a disc.
To stop formatting
Press RETURN.
(You can cancel formatting if it takes more than 2 minutes. The
disc or card must be reformatted if you do this.)
1 Press ▲▼ to select “Format disc” or “Format ”and
press ENTER in Step 4 on page 60.
2 Press ◄► to select “Yes” and press ENTER.
3 Press ◄► to select “Start” and press ENTER.
A message appears when formatting is finished.
4 Press ENTER.
e.g., DVD-RAM
Notes:
Do not turn the unit off or disconnect the AC power supply cord while
the message “Formatting the disc” is on the TV. This can render
the disc unusable. (This can take up to max. 70 minutes (DVD-RAM).
If it takes more than 2 minutes, you can cancel formatting by pressing
RETURN. The disc must be reformatted if you do this.)
All data on the disc or card is erased when it is formatted, including
recordings made with this unit. Data written to the disc or card by a
computer is also erased.
When a disc or card has been formatted using this unit, it may not be
possible to use it on any other equipment.
The disc cannot be formatted if the write protect tab (p. 9) is switched to
“PROTECT”. Release the protection to continue.
The SD Card cannot be formatted if the write protection (p. 11) is switched
to “LOCK”. Release the protection to continue.
The message “Unable to format” appears when trying to format discs this
unit cannot use.
DVD-R and CD-R/RW cannot be formatted.
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc
Titles 11
Used 0:22
Free 5:38(EP)
DVD-RAM
On
Erase all titles
Yes No
All titles and play lists will be erased.
Are you sure you want to continue?
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc
Titles 11
Used 0:22
Free 5:38(EP)
DVD-RAM
On
Erase all titles
Start Cancel
All titles and play lists will be
completely erased.
Are you sure you want to continue?
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc
Titles 11
Used 0:22
Free 5:38(EP)
DVD-RAM
On
Format disc
Yes No
Formatting the disc will erase all contents.
This will take approximately 1 minute.
Are you sure you want to continue?
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc
Titles 11
Used 0:22
Free 5:38(EP)
DVD-RAM
On
Format disc
Start Cancel
All contents of this disc will be
completely erased.
Do you want to continue?
2 Press ◄► to select “Yes” and press ENTER.
RAM SD
e.g., DVD-RAM
Select First play
Select whether to show the top menu after finalizing the disc. Do
this before finalizing the disc.
1 Press ▲▼ to select “Select First play” and press
ENTER in Step 4 on page 60.
2 Press ▲▼ to select “Top Menu” or “Title 1” and
press ENTER.
Top Menu: The top menu appears first.
Title 1: The disc content is played without displaying the top
menu.
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc
Titles 11
Used 0:22
Free 5:38(EP)
DVD-R
On
Select First play
Top Menu
Title 1
DVD-R
(Continued on next page.)
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by
the unit or the disc.
62
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
(Refer to “Finalize” on page 70.)
Finalize
You can play DVD-R on compatible DVD players by finalizing
them on this unit, effectively making them into DVD-Video that
complies with DVD-Video standards.
1 Press ▲▼ to select “Finalize” and press ENTER in
Step 4 on page 60.
2 Press ◄► to select “Yes” and press ENTER.
Before finalizing After finalizing
Disc display on this unit DVD-R DVD-V
Recording/Editing/ Entering
name
×
Play on other players
×
DVD-R finalized on this unit may not be playable on other players due to
the condition of the recording.
3 Press ◄► to select “Start” and press ENTER.
• Finalizing starts.
A message appears when finalizing is finished.
Notes:
Do not disconnect the AC power supply cord while the message
“Finalizing the disc” is on the television. This will render the disc
unusable.
Finalizing takes up to 15 minutes.
You can only finalize DVD-R that were recorded on this unit.
You cannot record on DVD-R that have been finalized.
After finalizing
- The disc becomes play-only and you can no longer record or edit it.
- DVD-R finalized on this unit may not be playable on other players due to
the condition of the recording.
- There is a pause of several seconds between titles.
- Titles are divided into about 5-minute* chapters.
* This time varies greatly depending on the condition and mode of recording.
Visit Panasonic’s homepage for more information about DVDs.
http://www.panasonic.com/playDVD-R
4 Press ENTER.
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc
Titles 11
Used 0:22
Free 5:38(EP)
DVD-R
On
Finalize
Yes No
This will take approximately ×× minutes.
Do you want to continue?
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc
Titles 11
Used 0:22
Free 5:38(EP)
DVD-R
On
Finalize
Start Cancel
You will be unable to record on this disc
one it is finalized.
Are you sure you want to continue?
DVD-R
(DVD-R recorded on this unit only)
63
Disc / Card Operation
Top view
0 --
1
2
3
4
5
6
7
8
9
0
*
Enter Name
_
ERASE
SET
1
A
D
G
J
M
P
T
W
.
2
B
E
H
K
N
Q
U
X
,
3
C
F
I
L
O
R
V
Y
?
4
S
Z
!
5
a
d
g
j
m
p
t
w
"
6
b
e
h
k
n
q
u
x
'
7
c
f
i
l
o
r
v
y
:
8
+
/
#
<
[
s
{
z
;
9
=
$
>
]
(
}
\
`
0
*
%
&
@
_
)
¯
|
^
SPACE
RAM
Characters
Title 64 (44*)
Play list 64
Disc 64
Folder Name (Still pictures) 36
* Title name for timer recording
The maximum number of characters:
DVD-R
Characters
Title 44
Disc 40
If a name is long, parts of it may not be shown in some screens.
1 Show Enter Name screen.
To end partway
Press RETURN.
• Text is not saved.
Name field:
Shows the text you have entered
2 Press ▲▼◄► to select a character and press
ENTER.
To erase a character
Press ▲▼◄► to select the character in the name field and
press PAUSE.
• You can also erase characters by selecting “ERASE” and
pressing ENTER.
Using the NUMBER keys to enter characters
e.g., entering the letter “R”
a. Press 7 to move to the 7th row.
b. Press 7 twice to highlight “R”.
c. Press ENTER.
To enter a space
Press CANCEL and press ENTER.
3 Press STOP.
You can also finish entering the title by selecting “SET” and pressing
ENTER.
Returns to the previously displayed screen.
This feature allows you to enter a name/title Page
Title 52
Title (timer recording) 40~41
Play list 59
Disc 60
Folder (Still pictures) 56
SD
Characters
Folder Name (Still pictures) 36
Repeat this step to enter other characters.
Notes:
The full title is shown in the Properties screen (pp. 52, 59), but if you enter
a long title, only part of it is shown in the program list or play list screen.
DVD-R
If you enter a long title, only part of it is shown in the menu screen
after finalization.
Still picture folder titles:
Titles are saved in the “TITLE.DVD” folder and can only be displayed on
this unit.
Input is not possible if the destination lacks sufficient space or has
exceeded the maximum number of allowable files.
The title may not appear correctly if input was done using other equipment.
You can give names to recorded titles, etc.
NUMBER keys
CANCEL
STOP (SET)
▲▼◄►
PAUSE (ERASE)
ENTER
RETURN
5
6
7
8
J
M
P
T
K
N
Q
U
L
O
R
V
S
7
7 7
Preparation
Press SD or DVD to select the drive.
Release protection before proceeding:
- Cartridge (p. 9)
RAM
- Disc (p. 60)
RAM
- Write Protect (p. 11)
SD
DVD-RRAM SD
DVD/SD
Entering Text
64
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Top view
You can copy the recorded still pictures on the Card to the
DVD-RAM.
You can copy the recorded still pictures on the DVD-RAM to the
Card.
1 Press MENU in Stop mode, then press ◄► to select
“FUNC.”
2 Press ENTER.
3 Press ▲▼◄► to select “DUBBING” and press
ENTER.
MENU
ADJ. SET UP FUNC.
DVD/SD
OK
PAGE
RETURN
e.g., Card
4 Press ▲▼ to select “Dubbing direction” and press
.
If you are not going to change the registered list press several
times. (See step 7.)
To select Source
Press ▲▼ to select “Source” and press ENTER. Press ▲▼ to
select the drive and press ENTER.
DVD
SD
Play back
Record
Dubbing
/ Edit
Set up
WRITE PROTECTION OFF
SD CARD
DIRECT NAVIGATOR
TIMER RECORDING
DUBBING
SETUP
COPY ALL PICTURES
CARD SETTING
s
t 0
ncel all
dubbing
d
irection
H
igh speed
Source SD card
Destination DVD
Press ENTER to change the setting.
Set the dubbing direction.
3
Create List 0
Cancel all
Start dubbing
Dubbing direction
SD card DVD
1
Mode
Picture High speed
2
Source SD card
Destination DVD
Set the dubbing direction.
Dubbing
ist 0
ancel all
rt dubbing
direction
e
High speed
Set the dubbing direction.
DVD
SD card
To select Destination
Press ▲▼ to select “Destination” and press ENTER. Press ▲▼
to select the drive and press ENTER.
• The same drive as the transfer (dubbing) source can be
selected.
ist 0
C
ancel all
rt dubbing
g
direction
e
High speed
Source SD card
Destination DVD
Press ENTER to change the setting.
Set the dubbing direction.
s
t 0
a
ncel all
t dubbing
d
irection
High speed
Set the dubbing direction.
DVD
SD card
Preparation
Press SD or DVD to select the drive.
Release protection before proceeding:
- Cartridge (p. 9)
RAM
- Disc (p. 60)
RAM
- Write Protect (p. 11)
SD
RAM SD
To confirm
Press .
To cancel all registered transferring (dubbing)
setting and lists
Press ▲▼ to select “Cancel All” and press ENTER. Press ◄►
to select “Yes” and press ENTER.
• The settings and lists may be cancelled in the following
situations.
When a still picture or folder has been recorded or erased at
the transfer (dubbing) source
When steps have been taken, for instance, to turn off the
unit, remove the card, open the tray, change the transfer
(dubbing) direction, etc.
SKIP
▲▼◄►
SUB MENU
RETURN
ENTER
SD
DVD
PAUSE
MENU
Transferring (Dubbing) Still Pictures
DVD/SD
Ι◄◄ /►►Ι
65
Disc / Card Operation
5 Press ▲▼ to select “Create list” and press .
Select the transferring (dubbing) items and register on the list.
3
Create List 0
Cancel all
Start dubbing
SET
01/01
Dubbing direction
SD card DVD
1
Mode
Picture High speed
2
Picture/Folder Picture
Space on destination 797MB
No. Capacity Name
Previous Next
Create a dubbing list.
Dubbing
New entry
3
Create List
Cancel all
Start dubbing
SET
01/01
Dubbing direction
SD card DVD
1
Mode
Picture High speed
2
Picture/Folder Picture
Space on destination 797MB
No. Capacity Name
Previous Next
Create a dubbing list.
Dubbing
New entry
To register individual still pictures
Press ▲▼ to select “New entry” and press ENTER. Press
▲▼◄► to select the still picture and press ENTER.
• To select a multiple number of items together, press PAUSE
to add the check mark and press ENTER. (Refer to “Multiple
editing” on page 66.)
• To show other pages (p. 66)
• To select the still pictures in another folder (see right)
• To edit the transferring (dubbing) list (see right)
To register on a folder by folder basis
a. Press ▲▼ to select “Picture/Folder” and press ENTER.
3
Create List 0
Cancel all
Dubbing direction
SD card DVD
1
Mode
Picture High speed
2
Picture/Folder Picture
Space on destination 797MB
No. Capacity Name
Create a dubbing list.
Dubbing
New entry
b. Press ▲▼ to select “Folder” and press ENTER.
c. Press ▲▼ to select “New item” and press ENTER.
d. Press ▲▼ to select the folder and press ENTER.
• To select a multiple number of items together, press PAUSE
to add the check mark and press ENTER. (Refer to “Multiple
editing” on page 66.)
• To show other pages (p. 66)
• To switch another higher folder (see right)
• To edit the transferring (dubbing) list (see right)
Still pictures and folders cannot be registered on the same list.
6 Press ▲▼ to select “Set” and press ENTER.
The transferring (dubbing) list is registered.
To select another folder
a. Press ▲▼◄► to select “Folder” and press ENTER.
b. Press ▲▼ to select the folder and press ENTER.
0002
Folder 100_PANA
00030001 0004
0006 0007 00080005
DIRECT NAVIGATOR Picture(JPEG) View
PICTURE
SD CARD
DIRECT NAVIGATOR Select Folder
SD CARD
\
DCIM
\
DCIM
\
100
_
PANA
001 100
_
PANA
002 101
_
PANA
003 102
_
PANA
- - -
DIRECT NAVIGATOR Select Folder
PICTURE
SD CARD
\
DCIM
\
DCIM
\
100
_
PANA
001 100
_
PANA
002 101
_
PANA
003 102
_
PANA
• The still pictures of different folders cannot be registered on the
same list.
• If there is a multiple number of higher folders recognizable, you
can switch them using ◄►. (Folders whose higher folders are
different cannot be registered on the same list.)
To edit the transferring (dubbing) list
Select the item.
Press SUB MENU.
Press ▲▼ to select the operation and press ENTER.
• Multiple editing is possible. (p. 66)
3
Create List
Cancel all
Start dubbing
SET
01/01
Dubbing direction
SD card DVD
1
Mode
Picture High speed
2
Picture/Folder Picture
Space on destination 797MB
No. Capacity Name
Previous Next
Create a dubbing list.
Dubbing
100-0832
100-0833
New entry
01
02
Erase all
Add
Erase
Erase all:
All currently registering folders are erased.
Add:
A folder is added in the desired location (before the
selected folder).
Erase :
The selected folder is erased.
(Continued on next page.)
7 Press ▲▼ to select “Start dubbing” and press
ENTER.
3
Create List 2
Cancel all
Start dubbing
Dubbing direction
SD card DVD
1
Mode
Picture High speed
2
Press ENTER.
Start dubbing.
Dubbing
For individual still pictures only
When specifying another folder as the transferring (dubbing)
destination, select “Folder”. Press ◄► to select “Yes” and press
ENTER to start transferring (dubbing).
3
Create List 2
Cancel all
Dubbing direction
SD card DVD
1
Mode
Picture High speed
2
Press ENTER.
Start dubbing.
Dubbing
Folder New folder
Do you want to create a new folder and copy to it?
0002
Folder 100_PANA
Create list Select pictures
SD CARD
00030001
0006 00070005
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by
the unit or the disc.
66
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
You can copy the whole contents of the Card to DVD-RAM.
(Maximum of 300 folders, 3 000 files)
Copy All Pictures
DVD
SD
Play back
Record
Dubbing
/ Edit
Set up
WRITE PROTECTION OFF
SD CARD
DIRECT NAVIGATOR
TIMER RECORDING
DUBBING
SETUP
COPY ALL PICTURES
CARD SETTING
MENU
ADJ. SET UP FUNC.
DVD/SD
OK
PAGE
RETURN
1 Press SD to select SD drive.
2 Press MENU in Stop mode, then press ◄► to select
“FUNC.”
3 Press ENTER.
4 Press ▲▼◄► to select “COPY ALL PICTURES” and
press ENTER.
Copy All Pictures(JPEG)
Copy Cancel
Copy from SD card
\
DCIM
Copy to DVD
\
JPEG
\
DCIM001
Copy all pictures(JPEG) in the card.
Only if there are multiple selectable folders on
the Card
5 Press ▲▼ to select “Copy from” and press ◄► to
select the dubbing source folder.
Press ▲▼ to select “Copy to” and press ◄► to
select the dubbing target folder.
Copy All Pictures(JPEG)
Copy Cancel
Copy from SD card
\
DCIM
Copy to DVD
\
JPEG
\
DCIM001
Copy all pictures(JPEG) in the card.
6 Press ▲▼◄► to select “Copy” and press ENTER.
All still pictures are copied. Follow the on-screen instructions.
To stop transferring (dubbing)
Press and hold RETURN for 3 seconds.
To return to the previous screen
Press RETURN.
To continue copying all pictures when copying is
completed
Press RETURN.
To finish copying all pictures when dubbing is
completed
Press ENTER.
Preparation
Press SD or DVD to select the drive.
Release protection before proceeding:
- Cartridge (p. 9)
RAM
- Disc (p. 60)
RAM
- Write Protect (p. 11)
SD
RAMSD
Notes:
When transferring (dubbing) the still pictures on a folder by folder or card
by card basis, files other than the still picture files inside the folder will
also be transferred (dubbed). (This does not apply to the lower folders
contained inside the folders.)
If still pictures are already contained inside the transfer (dubbing)
destination folder, the new still pictures are recorded following the existing
still pictures.
If the space on the destination drive runs out or the number of files/folders
to be transferred (dubbed) exceeds the maximum (p. 11), transferring
(dubbing) will stop partway through.
When a name has been input by this unit for the transfer (dubbing)
source folder, the folder name will be reflected in the transfer (dubbing)
destination folder.
Print number setting (DPOF) is not transferred (dubbed).
The sequence in which the still pictures are registered on the transfer
(dubbing) list may not be reflected at the transfer (dubbing) destination.
To stop transferring (dubbing)
Press and hold RETURN for 3 seconds.
To return to the previous screen
Press RETURN.
To show other pages
Press ▲▼◄► to select “Previous” or “Next” and press ENTER.
You can also press SKIP ►►Ι or SKIP Ι◄◄ to show other pages.
Multiple editing
Select with ▲▼◄► and press
(PAUSE). (Repeat.)
A check mark appears. Press (PAUSE) again to cancel.
67
Disc / Card Operation
Front view
MENU
ADJ. SET UP FUNC.
DVD/SD
OK
PAGE
RETURN
1 Press MENU in Stop mode, then press ◄► to select
“FUNC.”
2 Press ENTER.
3 Press ▲▼◄► to select “SETUP” and press ENTER.
You can also press DVD SETUP to enter the setup mode.
If necessary, refer to “Summary of settings” on next page.
DVD
SD
Play back
Record
Dubbing
/ Edit
Set up
DISC PROTECTION OFF
CARTRIDGE PROTECTION OFF
DVD-RAM
DIRECT NAVIGATOR
TIMER RECORDING
DUBBING
PLAY LIST
SETUP
FLEXIBLE RECORDING
DISC SETTING
e.g., DVD-RAM
If you change “Recording Time
in EP Mode”.
4 Press ▲▼ to select the Menus tab and press ◄►.
Language
Ratings
Recording Time in EP Mode
Play DVD-Audio in Video Mode
Level 8
EP (8H)
Off
SET UP
Disc
Video
Audio
Menus tab
5 Press ▲▼ to select the Items and press ENTER.
Language
Ratings
Recording Time in EP Mode
Play DVD-Audio in Video Mode
Level 8
EP (8H)
Off
SET UP
Disc
Video
Audio
Items
6 Press ▲▼ to select an Option and press ENTER.
Some options require different operations. Follow the displayed
instructions.
EP (6H)
EP (8H)
Recording Time in EP Mode
SET UP
Disc
Video
Audio
Options
Procedure
Changing the Unit’s Settings
To return to the previous screen
Press RETURN. Even if you have changed an option, the
change is not activated until you press ENTER.
To exit the screen
Press RETURN several times.
Note:
The settings remain intact even if you switch the unit to standby.
POWER
▲▼◄►
RETURN
ENTER
Disc Tray SD Card Slot
MENU
DVD SETUP
68
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
See page 67 for details on menu operation.
The settings remain intact even if you switch the unit to standby.
Summary of settings
Menus tab Items
Options
(Underlined items are the factory presets.)
Disc Languages
Choose the language for audio, subtitle and disc menus.
DVD-V
Press ENTER to display the menu.
Enter a code (p. 69) when you select “Other
****
Some discs start in a certain language despite any changes you make
here.
Audio Language
English French Spanish
Original: The original language of each disc will be selected.
Other
****
Subtitle Language Automatic:
If the language selected for “Audio Language” is not available, subtitles of
that language will automatically appear if available on that disc.
English French Spanish Other
****
Menu Language
English French Spanish Other
****
Ratings
Set a ratings level to limit DVD-Video play.
Follow the on-screen instructions. Enter a 4-digit password with
the NUMBER keys when the password screen is shown.
Do not forget your password.
8 No Limit: All DVD-Video can be played.
1 to 7: Prohibits play of DVD-Video with corresponding ratings
recorded on them.
0 Lock All: Prohibits play of all DVD-Video.
Changing ratings (When level 0-7 is selected)
Unlock Recorder Change Password
Change Level Temporary Unlock
Recording time in EP mode
Select the maximum number of hours for recording in EP mode.
(Refer to “Recording modes and approximate recording times”
on page 39.)
EP (6 H): You can record for 6 hours on an unused 4.7 GB disc.
EP (8 H): You can record for 8 hours on an unused 4.7 GB disc.
Play DVD-Audio in Video Mode
Select “Video (On)” to play DVD-Video content on some
DVD-Audio.
Video (On): The setting returns to “Audio (Off)” when you change
the disc or turn the unit off.
Audio (Off)
Video 3-D Y/C Separation
Allows high quality recording of the received picture.
On: High quality recording is achieved by precise separation
of the Y (luminance) and C (color) of the received
picture signal.
Off: Set to OFF to reduce ghost images when recording
pictures with fast motion. Does not work with S-Video
input pictures.
Hybrid VBR Resolution
The picture recorded to a DVD-RAM can be smoothed out.
(Refer to “VBR” on page 70.)
Automatic: Resolution is adjusted automatically to match the
picture when recording and noise is reduced over the
block.
RAM
Fixed: Recording is performed with fixed resolution. This
allows smoother recording of fast moving pictures, etc.
Still Mode
Select the type of picture shown when you pause play.
(Refer to “Frames and fields” on page 70.)
Automatic
Field: Select if jittering occurs when “Automatic” is selected.
Frame: Select small text or fine patterns cannot be seen clearly
when “Automatic” is selected.
Seamless Play
Plays chapters in the play list in a continuous playback method.
Seamless Play does not work with programs recorded in
LPCM or when using Quick View.
On: Enables smoother playback. (Does not function during
Quick View and when the audio of chapters varies.
Also, playback position may change.)
Off: Playback can be done with greater precision, but
continuous play may be momentarily halted.
Line-in NR
Reduces video tape noise while dubbing.
When noise reduction is on, “3-D Y/C Separation” (see above)
does not work regardless of the setting.
Automatic: Noise reduction only works on input picture from a video
tape.
On: Noise reduction works for any input video.
Off: Noise reduction is off. Select when you want to record
input as is.
Black Level Control
Select normal, lighter or darker for adjusting the black level control to the desired setting for picture enhancement.
Record level
Adjusts the black level of the signal recorded to a DVD.
Lighter Darker
Playback level
Adjusts the black level of the DVD playback signal.
Lighter Normal Darker
69
Disc / Card Operation
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by
the unit or the disc.
Menus tab Items
Options
(Underlined items are the factory presets.)
Audio Search Audio & PLAY ×1.3
You may hear sound regardless of this setting with some discs.
On: Audio is heard during first level search forward.
Off: Audio is not heard during search. Quick View (p. 46)
does not work.
D.Range Compression
DVD-V
(Dolby Digital only)
Change the dynamic range for late night viewing.
On: Off:
Select MTS
Select whether to record the main or secondary audio type
(SAP) when recording to DVD-R or DVD-RAM. (You cannot
change secondary audio when recording audio to DVD-R or
DVD-RAM from an external source.)
Main: SAP:
Digital Audio Output
Change the settings when you have connected equipment through this unit’s DIGITAL AUDIO OUT terminal. (p. 18)
Press ENTER to show the menu.
PCM Down Conversion
Select how to output audio with a sampling frequency of
96 kHz or 88.2 kHz.
Signals are converted to 48 kHz or 44.1 kHz despite the
above settings if the signals have a sampling frequency of
over 96 kHz or 88.2 kHz, or the disc has copy protection.
On: Signals are converted to 48 kHz or 44.1 kHz. (Choose
when the connected equipment cannot process signals
with a sampling frequency of 96 kHz or 88.2 kHz.)
Off: Signals are output as 96 kHz or 88.2 kHz. (Choose
when the connected equipment can process signals
with a sampling frequency of 96 kHz or 88.2 kHz.)
Dolby Digital
Select how to output the signal, to output
“Bitstream” so the connected equipment
decodes the signal, or to decode on
this unit and output the signal as “PCM”
(2 channel).
Note:
Not making the proper settings may result
in noise, possibly damage your hearing
and speakers, and digital recording may
not work properly.
Bitstream: When connecting to equipment displaying the Dolby
Digital logo.
PCM: When connecting to equipment not displaying the Dolby
Digital logo.
DTS
Bitstream: When connecting to equipment displaying the DTS logo.
PCM: When connecting to equipment not displaying the DTS
logo.
Audio for XP Recording
Choose the audio type when recording with XP mode.
Sound recordings made using LPCM require more
information than usual. Consequently the picture quality of
LPCM recordings may be less than that of normal XP mode
recordings.
• Dolby Digital
(p. 70)
• LPCM (p. 70)
Language Code List
Abkhazian: 6566 Chinese: 9072 Hausa: 7265 Lithuanian: 7684 Romanian: 8279 Telugu: 8469
Afar: 6565 Corsican: 6779 Hebrew: 7387 Macedonian: 7775 Russian: 8285 Thai: 8472
Afrikaans: 6570 Croatian: 7282 Hindi: 7273 Malagasy: 7771 Samoan: 8377 Tibetan: 6679
Albanian: 8381 Czech: 6783 Hungarian: 7285 Malay: 7783 Sanskrit: 8365 Tigrinya: 8473
Ameharic: 6577 Danish: 6865 Icelandic: 7383 Malayalam: 7776 Scots Gaelic: 7168 Tonga: 8479
Arabic: 6582 Dutch: 7876 Indonesian: 7378 Maltese: 7784 Serbian: 8382 Turkish: 8482
Armenian: 7289 English: 6978 Interlingua: 7365 Maori: 7773 Serbo-Croatian: 8372 Turkmen: 8475
Assamese: 6583 Esperanto: 6979 Irish: 7165 Marathi: 7782 Shona: 8378 Twi: 8487
Aymara: 6588 Estonian: 6984 Italian: 7384 Moldavian: 7779 Sindhi: 8368 Ukrainian: 8575
Azerbaijani: 6590 Faroese: 7079 Japanese: 7465 Mongolian: 7778 Singhalese: 8373 Urdu: 8582
Bashkir: 6665 Fiji: 7074 Javanese: 7487 Nauru: 7865 Slovak: 8375 Uzbek: 8590
Basque: 6985 Finnish: 7073 Kannada: 7578 Nepali: 7869 Slovenian: 8376 Vietnamese: 8673
Bengali;Bangla: 6678 French: 7082 Kashmiri: 7583 Norwegian: 7879 Somali: 8379 Volapük: 8679
Bhutani: 6890 Frisian: 7089 Kazakh: 7575 Oriya: 7982 Spanish: 6983 Welsh: 6789
Bihari: 6672 Galician: 7176 Kirghiz: 7589 Panjabi: 8065 Sundanese: 8385 Wolof: 8779
Breton: 6682 Georgian: 7565 Korean: 7579 Pashto, Pushto: 8083 Swahili: 8387 Xhosa: 8872
Bulgarian: 6671 German: 6869 Kurdish: 7585 Persian: 7065 Swedish: 8386 Yiddish: 7473
Burmese: 7789 Greek: 6976 Laothian: 7679 Polish: 8076 Tagalog: 8476 Yoruba: 8979
Byelorussian: 6669 Greenlandic: 7576 Latin: 7665 Portuguese: 8084 Tajik: 8471 Zulu: 9085
Cambodian: 7577 Guarani: 7178 Latvian, Lettish: 7686 Quechua: 8185 Tamil: 8465
Catalan: 6765 Gujarati: 7185 Lingala: 7678
Rhaeto-Romance:
8277 Tatar: 8484
Press NUMBER keys to enter the code.
70
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Bitstream
This is the digital form of multi-channel audio data (e.g., 5.1 channel) before
it is decoded into its various channels.
CPRM (Content Protection for Recordable Media)
CPRM is technology used to protect broadcasts that are allowed to be
recorded only once. Such broadcasts can be recorded only with CPRM
compatible recorders and discs.
Decoder
A decoder restores the coded audio signals on DVDs to normal. This is
called decoding.
Dolby Digital
This is a method of coding digital signals developed by Dolby Laboratories.
Apart from stereo (2-channel) audio, these signals can also be multichannel
audio. A large amount of audio information can be recorded on one disc
using this method.
Dolby Pro Logic
A surround system where a 4-channel audio track is recorded as 2 channels
and then is restored to 4 channels for play. The surround channel is
monaural and can reproduce up to 7 kHz.
Down-mixing
This is the process of remixing the multi-channel audio found on some discs
into two channels for stereo output. It is useful when you want to listen to the
5.1-channel audio recorded on DVDs through your television’s speakers.
Some discs prohibit down-mixing and this unit can then only output the front
two channels.
DPOF (Digital Print Order Format)
DPOF is the standard printing format for still picture data. It is used by
photo developing stores to print out the still picture data taken from a digital
camera and other equipment or when printing from your home printer.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters around the world.
There is good separation between the channels, so realistic sound effects
are possible.
Dynamic range
Dynamic range is the difference between the lowest level of sound that can
be heard above the noise of the equipment and the highest level of sound
before distortion occurs. Dynamic range compression means reducing the
gap between the loudest and softest sounds. This means you can listen at
low volumes but still hear dialog clearly.
Film and video
DVD-Videos are recorded using either film or video. This unit can determine
which type has been used, then uses the most suitable method of
progressive output.
Film is 24 or 30 frames per second, with motion picture film generally
being 24 frames per second.
Video is 60 fields per second (two fields making up one frame).
Finalize
A process that makes play of a recorded CD-R, CD-RW or DVD-R etc.
possible on equipment that can play such media. You can finalize DVD-R on
this unit.
You cannot record onto or edit finalized discs.
Formatting
Formatting is the process of making media such as DVD-RAM recordable
on recording equipment. You can format the DVD-RAM on this unit.
Formatting erases irrevocably all recordings on the disc.
Frames and fields
Frames refer to the single images that constitute the video you see on your
television. Each frame consists of two fields.
A frame still shows two fields, so there may be some blurring, but picture
quality is generally better.
A field still shows less picture information so it may be rougher, but there is
no blurring.
JPEG (Joint Photographic Experts Group)
This is a system used for compressing/decoding color still pictures. If you
select JPEG as the storage system on digital cameras etc., the data will
be compressed to 1/10–1/100 of its original size. The special quality of this
standard is that there is little deterioration in picture quality in comparison to
the degree of compression.
LPCM (Linear pulse code modulation)
These are uncompressed digital signals. This unit outputs linear PCM sound
in 2 channels from the DIGITAL AUDIO OUT terminal. LPCM sound is
available when recording in XP mode.
MP3 (MPEG Audio Layer 3)
An audio compression method that compresses audio to approximately one
tenth of its size without any considerable loss of audio quality. You can play
MP3 you have recorded onto CD-R and CD-RW.
Playback control (PBC)
If a Video CD has playback control, you can select scenes and information
with menus.
Progressive/Interlace
NTSC, the video signal standard, has 480 interlaced (I) scan lines, whereas
progressive scanning uses twice the number of scan lines. This is called
480P.
Using progressive output, you can enjoy the high-resolution video recorded
on media such as DVD-Video.
Your television must be compatible to enjoy progressive video.
Protection
You can prevent accidental erasure by setting writing protection or erasure
protection.
Sampling frequency
Sampling is the process of converting the heights of sound wave (analog
signal) samples taken at set periods into digits (digital encoding). Sampling
frequency is the number of samples taken per second, so larger numbers
mean more faithful reproduction of the original sound.
Subtitles
When dialogue which appears at the bottom of the screen.
TIFF (Tag Image File Format)
A still picture data standard A common format for storing high quality images
on digital camera’s and other devices.
VBR (Variable bitrate)
This is a method of video recording that adjusts the bit rate according to
video signal.
Glossary
=
+
Frame Field Field
71
Information
These displays will alert you to a missed operation or provide further instructions.
Helpful Hints
Warning and Instruction Displays
OSD CAUTION Page
ERROR HAS OCCURRED
PLEASE PRESS ENTER.
A serious, but temporary error has occurred and one of the unit's safety devices has activated.
Press ENTER. The unit switches to the standby mode. Press POWER to turn the unit on again.
NO DISC
You haven’t inserted a disc. Correctly insert a disc that this unit can use. 9, 34
The disc is upside down. If it is a single-sided disc, insert it so the label is facing up. 34
THIS IS
NON-RECORDABLE DISC
The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R. 9
THIS DISC (CARD) IS NOT
FORMATTED PROPERLY
PLEASE FORMAT THE DISC
IN DISC SETTING TO RECORD
You inserted an unformatted DVD-RAM or Card. Format the disc or card with this unit. 61
CANNOT FINISH RECORDING
COMPLETELY
The program was copy-guarded.
No space left on the disc.
Create space by erasing any unwanted programs.
RAM
Use a new disc.
RAM
DVD-R
52
Recording was not completed for some other reason.
CANNOT RECORD
DISC IS FULL
No space left on the disc.
Create space by erasing any unwanted programs.
RAM
Use a new disc.
RAM
DVD-R
52
CANNOT RECORD
MAXIMUM NUMBER OF TITLES
EXCEEDED
The operation is prohibited by the unit or disc. 44
CANNOT READ
PLEASE CHECK THE DISC
The disc is dirty.
CANNOT PLAY You inserted an incompatible disc (Discs recorded in PAL video etc.). 8
PLEASE CHANGE THE DISC
There may be a problem with the disc. Press OPEN/CLOSE to remove it and check it for
scratches or dirt. (The unit turns off automatically after you open the tray.)
NO SD CARD
NO VALID SD CARD
The card is not inserted. If this message is displayed with a compatible card already inserted,
turn off the power, remove and then re-insert the card.
34
The card format does not match. 11
The card inserted is not compatible. 11
NO FOLDER There is no compatible folder in this unit. 11
CANNOT WRITE
The card is currently protected Release the write protection. 11
There is no space remaining. Erase any unwanted files (still pictures). 55, 56
NO READ
The disc is dirty or badly scratched.
Clean the disc if it is dirty.
The disc cannot be played if it is scratched and this display doesn’t disappear.
10
The unit cannot read the disc.
You have used a DVD-RAM/PD lens cleaner and it has finished. 76
UNSUPPORT You have inserted a disc the unit cannot play or record on. 8~9
U14
The unit is hot.
The unit switches to standby automatically for safety reasons and you cannot operate it.
Wait for about 30 minutes for the service number to disappear.
Select a position with good ventilation when installing the unit.
Do not block the cooling fan on the rear of the unit.
U99
The unit fails to operate properly. Press POWER to switch the unit to standby. Now press
POWER again to turn the unit on.
SLF CHECK
There was a power failure or the AC plug was disconnected while the power was on. The unit is
carrying out its recovery process. Wait until the message disappears.
72
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Check the following points once again if you are having trouble with your unit.
PROBLEM CORRECTION Page
Power
No power...
Insert the AC power supply cord securely into a known active AC outlet. 15
Set POWER to ON. 12, 13
Operation
Cannot operate the DVD...
Press DVD when operating DVD. 34
Some operations may be prohibited by the disc. 36~37
Cannot operate the SD (Card)...
Press SD when operating card. 34
The unit is on but cannot be operated...
Recording drive or playback drive have not been selected properly. 34
Some operations may be prohibited by the disc. 36~37
The unit is hot (“U14” appears on the display). Wait until “U14” disappears. 71
One of the unit’s safety devices may have been activated.
Reset the unit as follows:
(1) Press POWER on the main unit to switch to standby. If the unit doesn’t switch to
standby, press and hold POWER on the main unit for about 10 seconds. The unit
is forcibly switched to standby. Alternatively, disconnect the AC power supply cord,
wait 1 minute, then reconnect it.
(2) Press POWER to turn the unit on.
Cannot eject a disc...
The Disc Tray can be locked/unlocked.
[Lock]
1 Turn the unit Power ON.
2 Simultaneously press STOP on the unit and POWER on the Remote Control.
[Unlock]
Repeat above steps to unlock.
If the steps above do not work, there may be a unit malfunction. With unit in OFF
condition, hold down both STOP and CH buttons on the unit for about 5 seconds.
Remove disc. Contact your retailer.
Remote
Control
The Remote Control doesn’t work...
The batteries are depleted. Replace them with new ones. 8
Point the Remote Control at the Remote Control sensor on the main unit.
Remove obstacles between the Remote Control and main unit.
Picture
The images from this unit do not appear on
the television...
Make sure your antenna system (TV or CABLE) is correctly set. 15
Picture flickers...
Picture is not sharp...
Make sure the antenna location, direction or connection. 15
Spots appear on screen, the screen flickers
...
The unit may be receiving influence, such as electromagnetic wave interference or
induced electromagnetic wave from geomagnetism or external forces (automobile,
electric train, power lines, neon light, motor, magnetized metal framework of a building,
metal shutters, etc.).
The top and bottom parts of the screen are
blank...
Using picture media wider than 16:9, such as cinema vision size media, etc. may
produce blank portions at the top and bottom of the screen.
Using Zoom or Just causes top and bottom
of screen to disappear...
The screen position may be out of adjustment.
Adjust the screen position.
26
There is a lot of after-image when playing
video...
Select “MPEG NR” in the OTHER ADJUST menu to “OFF”. 33
Before Requesting Service
73
Information
PROBLEM CORRECTION Page
Sound
No sound...
Low volume...
Distorted sound...
Make sure your antenna system (TV or CABLE) is correctly set. 15
Check the connections. Check the input mode on the amplifier if you have connected
one.
16~20
Turn SURROUND off if it causes distortion. 31
Cannot hear the desired audio type...
Press AUDIO to select the desired audio type. 48
If “D.MIX” does not appear in the display when playing multi-channel DVD-Audio, audio
output will be the front two speakers only.
13
You cannot change the DVD-Audio audio type if the software producer has restricted
play in stereo.
Turn off SURROUND in the following cases.
- When using discs that do not have surround sound effects such as Karaoke discs.
- When playing MTS broadcast programs.
31
Cannot switch audio...
You have used digital connection. Set “Dolby Digital" to “PCM" or connect to other
equipment using audio cables (analog connection).
18, 69
It is not possible to switch the audio when the recording mode is XP and “LPCM” has
been selected in the SETUP menu, “Audio for XP Recording”.
Select “MAIN” or “SAP” from “Select MTS” in the Audio menu before recording.
69
There are discs which audio cannot be changed because of how the disc was created.
Recording, Timer Recording
Cannot record...
You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc
the unit can record onto.
9
The disc is unformatted. Format the disc.
RAM
61
The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with
“DISC SETTING”.
9, 61
Some programs have limitations on the number of times they can be recorded (CPRM). 38
The disc is full or nearly full. Erase unneeded titles or use another disc. 55
You cannot record on finalized DVD-R discs.
If you repeatedly insert discs or turn this unit on and off 50 times or more, the recording
or editing of DVD-R may be disabled.
The material you are trying to record is copy-guarded.
Timer recording will not be activated when in editing or transfer (dubbing). Timer
recording will begin after the editing/transfer (dubbing) is finished.
You cannot record the COMPONENT and HDMI signals. 16, 17
A part or whole of a recorded title has been
lost...
If the power shuts down or the plug is disconnected from the household AC outlet while
recording or editing, the program may be lost or the disc may become unusable.
We cannot offer any guarantee regarding lost titles or discs. You will have to format
the disc ([RAM]) or use a new disc.
Timer recording does not work properly...
VCR Plus+ system does not work properly...
When connected to cable TV box or satellite receiver, the VCR Plus+ system does not
work.
The timer program is incorrect or different timer program times overlap. Correct the
program.
41
The clock is not correct. Set the clock. 23
Correct the guide channels with “VCR Plus+ CH Setting” in the PROGRAM CHANNEL
menu.
24
The same guide channel is set to 2 or more channel positions. Set the guide channel
correctly or delete unnecessary channels.
24
Timer recording will not be activated during formatting, transfer (dubbing) and other
such operations which should not be interrupted when they are being carried out.
Timer recording does not stop even when
STOP is pressed...
Press and hold STOP for a few seconds to turn “
” off. Recording stops.
40, 41
The timer program remains even after
recording finishes...
The timer program remains if set to daily or weekly. 41
Strip-shaped black noise is recorded...
The device in playback is interfered with by the TV because the device is too close to
the TV. Move the device away from the TV.
Cannot record video or sound from the
external device...
The external device is not correctly connected. 16~20
The proper external input channel (L1 or L2) is not selected. 43
74
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
PROBLEM CORRECTION Page
Playback
Play fails to start even when PLAY is
pressed...
Play starts but then stops immediately...
Insert the disc correctly with the label facing up. 34
You tried to play a blank DVD-RAM/DVD-R, or discs unplayable on this unit. 8
When recording to DVD-RAM using EP (8H) mode, play may not be possible on DVD
players that are compatible with DVD-RAM. In this case use EP (6H) mode.
68
DVD-Video is not played...
Some DVD-Video cannot be played when you change the ratings level. 68
Picture distorted during search...
Some distortion is normal.
Alternative sound track and subtitles cannot
be selected...
The languages are not recorded on the disc.
You may have to use the disc’s own menus to select languages.
No subtitles...
When progressive output is on, closed captions cannot be displayed.
Subtitles are not recorded on the disc.
Turn the Subtitles ON. 49
Angle cannot be changed...
This function depends on software availability. Even if disc has multiple angles, they
may be recorded for specific scenes only.
You have forgotten your ratings password...
Reset all DVD initial settings to ex-factory condition. 67
Quick View does not work...
This does not work if the setting is “Off” in “Search Audio & PLAY ×1.3”. 69
This does not work when audio is other than Dolby Digital.
This does not work when recording is in XP or FR mode.
Play stops for a moment during Quick
View...
Play may stop where two play lists join, but this is malfunction.
The resume play function does not work...
This function only works when “PLAY” is flashing in the unit’s display. 44
Memorized positions are canceled when the unit is turned off or when the tray is
opened. The memorized position on the play list is also canceled when the play list and
title are edited.
Discs recorded on this unit cannot be played
on other equipment...
Discs recorded on this unit must be finalized in order to play them on other equipment.
Edit
Cannot format...
You tried formatting a disc that is not compatible with this unit. 8~9
If disc is dirty, purchase a special disc cleaner (LF-K200DCA1, where available) and
format after disc is cleaned.
10, 76
Cannot create chapters...
Cannot mark the start point or the end point
during “Shorten” operation...
The unit writes the chapter division information to the disc when you turn it off or
remove the disc. The information is not written if there is an interruption in the power
before this.
These operations are not possible with still pictures.
You cannot set points if they are too close to each other. You cannot set an end point
before a start point.
Cannot erase chapters...
When the chapter is too short to erase, use “Combine Chapters” to make the chapter
longer.
53
The available recording time doesn’t
increase even after erasing recordings on
the disc...
Available recording space on the DVD-R does not increase even after erasing
previously recorded titles.
Cannot create a play list...
You cannot select all the chapters at once in a title if the title also includes still pictures.
Select them individually.
Still pictures
The contents of the card cannot be read...
The memory card format is not compatible with the unit.
Format using FAT 12 or FAT 16 with other equipment or format the memory card
with this unit.
61
The unit tried to display still picture files that were in a folder level that is not compatible. 11
The still picture file is not JPEG or TIFF.
This unit displays still pictures (JPEG and TIFF) that are in accordance with DCF
standard.
11
Turn off and then turn on the unit again.
Transferring (dubbing), erasing and setting
protection takes a long time...
When there are a lot of folders and files, it may sometimes take a few hours.
When repeating copying or erasing, it may sometimes take a long time. Format the disc
or memory card.
61
The tray won’t open/close...
The tray cannot be opened or closed while the still pictures are played back and editing
screen is being displayed. Press RETURN a few times to clear the screen.
Cannot display Direct Navigator screen...
This screen cannot be displayed during recording or transfer (dubbing) or while the unit
is standing by for linked timer recording with external equipment.
Cannot edit or format a card...
Release the card’s protection setting. (With some cards, the “Write protection Off”
message sometimes appears on the screen even when protection has been set.)
11
75
Information
PROBLEM CORRECTION Page
Displays
The display is dim...
Change “FRONT DISPLAY” in the OTHER ADJUST menu. 33
“12:00” is flashing on the unit’s display...
• Set the clock. 23
The recording time display, the transfer
(dubbing) process display and the displayed
recording time of MP3 are different from the
actual time...
The time on the unit’s display and the remaining recording time on the screen may be
indicated less or more than the actual value.
In DVD-R, the remaining capacity does not increase even if programs are erased.
If you repeat recording or editing 200 times or more, the remaining capacity of the
DVD-R is reduced and then recording or editing may be disabled.
The time during fast forward and rewind, or the process during transfer (dubbing) may
not be displayed accurately.
Miscellaneous
TV sometimes makes a cracking sound...
If there is no problem with picture or audio, this sound is a result of normal cabinet
shrinkage due to changes in room temperature. This will not effect performance, etc.
The main unit is hot.
The main unit radiates heat and some of the parts may become hot. This is not a
problem for performance or quality. Set up at a location with good ventilation. Do not
cover the ventilation holes of the TV with a tablecloth etc., and do not place on top of
other equipment.
HDMI
Poor Video...
(Snow noise, no picture, picture runs, etc.)
HDMI cable is not connected securely. 17
Turn the power supply of the TV set and connected equipment OFF then turn on. 17
Check compatibility of input signal from the connected equipment. 17
The connected equipment must be EIA/CEA-861/861B compliant. 17
Poor Audio...
Change the audio setting of the connected equipment to L.PCM.
Check the setting of HDMI INPUT. 17
If the problem is due to the digital audio connection, change to the analog audio
connection.
18
If you cannot resolve the problem, please call the Customer Satisfaction Center for product assistance at 1-800-211-PANA(7262).
To locate an authorized servicenter call toll free 1-800-211-PANA(7262)
or, contact us via the web at:http://www.panasonic.com/contactinfo
76
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Q & A
Question Answer
I want to enjoy 5.1 Ch surround sound of Dolby
digital, DST, etc. What equipment do I need?
A This unit alone is not enough. You will need 6 speakers and, if a digital connection, an amp
equipped with Dolby digital or DST recorder. (DVD playback only)
Can I play DVD-Video, DVD-Audio and Video
CDs purchased abroad?
You can play them if the video standard is NTSC.
A Only if the regional code includes “ALL” or “1”. Check the package.
Can a DVD-Video that does not have a region
number be played?
The DVD-Video region number indicates the disc conforms to a standard. You cannot play discs that
do not have a region number.
Can I use DVD-R and DVD-RW in this unit?
A Only a DVD-R that has been finalized can be used. DVD-RW cannot be used.
This unit also record and plays 1×-4× recording speed DVD-R discs.
Can I use CD-R and CD-RW in this unit?
A CD-R and CD-RW recorded with finalized MP3 music will play. However, this unit does not allow
CD-R and CD-RW recording.
Can I record from a video or outside DVD
source?
A Most video tape and DVD titles on the market are copy protected. In this case, recording is not
possible.
Can I play DVD-Rs recorded on this unit on
other machines?
A Once a DVD-R recorded on this unit is finalized, it can be played on other DVD-R compatible
machines. (It is not guaranteed to work with all machines.) It may not play depending on recording
conditions.
Can I record digital audio signals on this unit? This is not possible.
How many times can I rewrite a DVD-RAM? A This varies based on conditions of usage, but they can be rewritten up to about 100 000 times.
Can I record from a commercially purchased
video cassette or DVD?
Most commercially sold video cassettes and DVD are copy protected; therefore, recording is usually
not possible.
Can a digital audio signal during DVD playback
be recorded to other equipment?
You can record if using the PCM signal. When recording DVD, change the “Digital Audio Output”
settings to the following from the SETUP menu.
- PCM Down Conversion: On
- Dolby Digital: PCM
- DTS: PCM
However, only
- As long as digital recording from the disc is permitted.
- As long as the recording equipment is compatible with a sampling frequency of 48 kHz.
You cannot record MP3 signals.
The precision parts in this unit are readily affected by the environment, especially temperature, humidity, and dust. Cigarette
smoke also can cause malfunction or breakdown.
To clean this unit, wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this unit.
Before using chemically treated cloth, read the instructions for the cloth carefully.
Use eyeglass cleaner to remove stubborn dirt from the LCD.
Observe the following points to ensure continued listening and viewing pleasure.
Dust and dirt may adhere to the unit’s lenses over time, possibly making it impossible to record or play discs.
Use the recommended DVD-RAM/PD Lens cleaner (LF-K123LCA1) about once every year, depending on frequency of use and the
operating environment.
Read the lens cleaner’s instructions carefully before use.
Maintenance
CAUTION :
If water or other liquid enters the monitor through the display panel surface, a malfunction may occur.
77
Information
Designs and specifications are subject to change without notice.
Specifications
Unit
Power Supply 120 V AC, 50/60 Hz
Power Consumption
Power On: 116 W
Power Off: 0.8 W (Unit)
0.9 W (Remote Control)
Broad cast Channels VHF 2 ~ 13, UHF 14 ~ 69
CA BLE Channels
Midband A through I (14 ~ 22)
Superband J through W (23 ~ 36)
Hyperband AA ~ EEE (37 ~ 64)
Lowband A-5 ~ A-1 (95 ~ 99)
Special CABLE channel 5A (01)
Ultraband 65 ~ 94, 100 ~ 125
LCD 22-inch, 16:9 aspect ratio LCD panel
Screen size
(W × H × diagonal)
488 mm × 274 mm × 560 mm
Speaker 8 W (4 W + 4 W)
Connection Terminals
INPUT
VIDEO (RCA PIN Type × 1) × 2:
1.0 Vp-p (75 )
S-VIDEO (MINI DIN 4pin × 1) × 2:
Y: 1 Vp-p (75 )
C: 0.286 Vp-p (75 )
AUDIO L-R (RCA PIN Type × 2) × 2:
0.5 Vrms
COMPONENT VIDEO
INPUT
Y × 1:
1.0 Vp-p (including synchronization)
PB/PR × 1:
±0.35 Vp-p
AUDIO L-R (RCA PIN Type × 2) × 1:
0.5 Vrms
HDMI INPUT
HDMI type A Connector
AUDIO L-R (RCA PIN Type × 2) × 1:
0.5 Vrms
OUTPUT
AUDIO L-R (RCA PIN Type × 2) × 1:
0.5 Vrms
Headphones/Earphones Stereo (M3 plug)
Optical digital output
Optical connector: only for DVD/CD
× 1
Operating Temperature 5 °C ~ 35 °C (41 °F ~ 95 °F)
Operating Humidity 10 % ~ 75 %
Weight 13.3 kg
Dimensions
(W × H × D)
592 mm × 518 mm × 294 mm
DVD
Recording system
DVD video recording standards
(DVD-RAM),
DVD video standards (DVD-R)
Recordable discs
12 cm (5˝) 4.7 GB DVD-RAM discs
12 cm (5˝) 9.4 GB DVD-RAM discs
8 cm (3˝) 2.8 GB DVD-RAM discs
12 cm (5˝) 4.7 GB DVD-R discs (for
General Ver. 2.0)
8 cm (3˝) 1.4 GB DVD-R discs (for
General Ver. 2.0)
Recording time
Max. 8 hours (using 4.7 GB disc)
XP: 60 minutes
SP: 120 minutes
LP: 240 minutes
EP: 480 minutes
Discs played
12 cm (5˝) 4.7 GB DVD-RAM discs
12 cm (5˝) 9.4 GB DVD-RAM discs
8 cm (3˝) 2.8 GB DVD-RAM discs
12 cm (5˝) 4.7 GB DVD-R discs
(for General Ver. 2.0)
8 cm (3˝) 1.4 GB DVD-R discs
(for General Ver. 2.0)
DVD-VIDEO discs
CD-Audio discs (CD-DA)
Video CD discs
DVD-AUDIO discs
CD-R/CD-RW discs (CD-DA, Video
CD, MP3 formatted discs)
SD
SD Card Slot SD Memory Card Slot
Compatible media SD Memory Card, MultiMediaCard
Format FAT12 or FAT16
Image format
JPEG conforming to DCF (Design rule
for Camera File system)
(sub sampling; 4:2:2 or 4:2:0)
TIFF (Uncompressed RGB chunky)
DPOF Compatible
Number of pixels 320 × 240 to 6 144 × 4 096
78
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF
MATSUSHITA ELECTRIC CORPORATION OF AMERICA
One Panasonic Way Secaucus, New Jersey 07094
PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC
OF PUERTO RICO, INC.,
AVE. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto
Rico 00985
Panasonic/Quasar Video Products
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Sales
Company (collectively referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original
purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product.
The decision to repair or replace will be made by the warrantor.
Product Parts Labor Service Contact Number
Camcorder
One (1) Year (except CCD Image
Sensor)
CCD Image Sensor - 6 (Six) Months
Ninety (90) Days
Ninety (90) Days
Carry-In or Mail-In 1-800-211-PANA(7262)
DVD/VCR Deck,
A/V Mixer
One (1) Year Ninety (90) Days Carry-In or Mail-In 1-800-211-PANA(7262)
TV/VCR, TV/DVD,
TV/DVD/VCR Combination
One (1) Year (except CRT)
CRT - Two (2) Years
Ninety (90) Days
Ninety (90) Days
Carry-In: 21 CRT and Smaller
In-Home or Carry-In: 22 CRT and
Larger
1-800-211-PANA(7262)
LCD TV/DVD-Recorder
Combination
One (1) Year One (1) Year In-Home or Mail-In 1-800-211-PANA(7262)
TV/HDR Combination
One (1) Year (except CRT)
CRT - Two (2) Years
Ninety (90) Days
Ninety (90) Days
In-Home or Carry-In 1-888-843-9788
Rechargeable Batteries
(in exchange for defective item)
Ten (10) Days Not Applicable Carry-In or Mail-In 1-800-211-PANA(7262)
Tape, DVD-RAM disc
(in exchange for defective item)
Five (5) Days Not Applicable Carry-In or Mail-In 1-800-211-PANA(7262)
Memory Cards (in exchange for
defective item)
Ninety (90) Days Not Applicable Carry-In or Mail-In 1-800-211-PANA(7262)
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must carry-in or
mail-in your product or arrange for in-home service, as applicable, during the warranty period.
If non-rechargeable batteries are included, they are not warranted. This warranty only ap plies to products purchased and serviced in the United States or
Puer to Rico. This warranty is extended only to the original purchaser of a new product which was not sold “as is”. A purchase receipt or other proof of the
original purchase date is required for warranty service.
Carry-In, Mail-in or In-Home Service
For Carry-In, Mail-In or In-Home Service (as applicable) in the United States call toll free contact number listed above or visit Panasonic Web Site:
http://www.panasonic.com
For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910.
In-Home service, if applicable, requires clear, complete and easy access to the product by the authorized servicer and does not include removal or re-
installation of an installed product. It is possible that certain in-home repairs will not be completed in-home, but will require that the product, or parts of the
product, be removed for shop diagnosis and/or repair and then re turned.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage, nor
does it cover markings or retained images on the picture tube or LCD panel resulting from viewing fixed images (including, among other things, letterbox
pictures on standard 4:3 screen TV’s, or non-expanded standard 4:3 pic tures on wide screen TV’s, or onscreen data in a stationary and fixed location).
The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or
failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up ad just ments, misadjustment
of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or
other business), rental use of the product, service by anyone other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to
acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to
and from the servicer, loss of media or images, data or other memory or recorded content. The items listed are not exclusive, but are for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE
LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the
exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during
or after the warranty period, you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the warrantor’s
Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN IN-HOME SERVICE CALL, WHERE APPLICABLE) WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY ARE YOUR RESPONSIBILITY.
Limited Warranty
79
Information
As of October 2003
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and
Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/support
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
Service in Puerto Rico
Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company
Factory Servicenter:
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Phone (787)750-4300 Fax (787)768-2910
For hearing or speech impaired TTY users, TTY : 1-877-833-8855
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
http://www.pasc.panasonic.com
or, send your request by E-mail to:
npcparts@panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday – Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South,
Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
Accessory Purchases
For hearing or speech impaired TTY users, TTY : 1-866-605-1277
Customer Services Directory
80
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Guía rápida de uso en español
Notas sobre las conexiones
Desconecte la alimentación de todos los componentes antes de
realizar cualquier conexión.
Si los cables necesarios para conectar un componente al sistema no
están incluidos con el componente o disponibles opcionalmente, quizás
deba adoptar un cable para que se adecue al componente involucrado.
Consulte cuidadosamente el manual de instrucciones de cada
componente del sistema antes de conectarlo.
Conexión del cable
Conecte el cable
suministrado por la
compañía de cable local
al terminal VHF/UHF de
la unidad.
Apretar demasiado los cables coaxiales RF “tipo tuerca”
podría dañar los conectores. Asegúrelos solamente con los
dedos.
Conexión del terminal de entrada RF
Nota para el instalador del sistema de CABLE:
Este recordatorio tiene la finalidad de llamar la atención a los
instaladores del sistema de CABLE (televisión por cable) sobre
el artículo 820-40 de NEC que brinda pautas para una conexión
a tierra apropiada y, en particular, especifica que la tierra del
cable se deberá conectar al sistema de tierra del edificio, tan
cerca del punto de ingreso del cable como sea práctico.
Caja de cables
Entrada del
CABLE
Antena
VHF
Antena
UHF
PRECAUCIÓN
O
Mezclador
Conexión de la
antena
Conecte el cable de la
antena al terminal VHF/
UHF de la unidad.
Conexión
VIDEO S VIDEO
IN
AUDIO
RL
VIDEO S VIDEO
IN
AUDIO
R
L
Conexión del terminal de entrada AV
Conecta videograbadores y otros equipos periféricos
Se usa el terminal Video Se usa el terminal S-Video
O
Y
COMPONENT VIDEO INPUT
AUDIO
VIDEO
RL
La señal de componente permite una reproducción del color
más precisa porque cada una de las señales Y, P
B y PR se
reciben por separado.
La indicación del terminal de salida de la señal de componente
diferirá según el dispositivo de salida (Y, P
B, PR).
Lea las instrucciones de funcionamiento suministradas con el
dispositivo de salida.
Reproductor DVD
COMPONENT VIDEO
AUDIO
Tipo de
modo
Datos de señal
Exhibición
del menú de
información
Nº de puntos
(H × V)
Frecuencia
horizontal
(kHz)
Frecuencia
vertical (Hz)
Señales de
formato DTV
480i 664 × 485 15.73 29.97 480 i
480p 720 × 483 31.47 59.94 480 p
*720p 1 280 × 720 45.00 60.00 720 p
1 080i 1 920 × 1 080 33.75 30.00 1 080 i
Señales de componente (Y, PB, PR) que pueden
recibirse
• Las señales de entrada que no sean las que aparecen marcadas con un
asterisco * en la lista, le proporcionarán una imagen estable y hermosa.
Conexión de los terminales de entrada
COMPONENT VIDEO
Conexión HDMI
HDMI
*1
(High Definition Multimedia Interface) es la primera interfaz
A/V de toda la electrónica digital de consumo que soporta el
estándar no comprimido. El terminal HDMI soporta tanto los datos
de vídeo como los de audio.
Puede conectar un dispositivo electrónico de consumo conforme
con la norma EIA / CEA-861 / 861B
*2
, como por ejemplo un Set
Top Box (caja de conexión a Internet) o reproductor de DVD con
terminal de salida HDMI o DVI al terminal de entrada HDMI
*1
.
Ingrese una fuente de imagen de alta definición con protección
de contenidos digitales de gran ancho de banda (HCDP) a este
terminal HDMI, para poder exhibir en este televisor imágenes de
alta definición en formato digital.
*1
HDMI, el logotipo HDMI y High-Definition Multimedia
Interface son marcas comerciales o marcas comerciales
registradas de HDMI Licensing LLC.
*2
La conformidad de los estándares EIA / CEA-861 /
861B cubre perfiles para la transmisión de video digital
no comprimido, incluyendo la protección de contenidos
digitales de gran ancho de banda.
81
Information
Configuración inicial (listo para reproducir)
Tras enchufar la unidad en la toma de CA de su casa y presionar
POWER para encender la unidad por primera vez, la unidad
le asistirá para configurar el idioma de pantalla, sintonizará
automáticamente todos los canales que puede recibir y ajustará el
reloj.
La unidad determina automáticamente el tipo de transmisión
(ondas de radio o cable) y sintoniza los canales de la siguiente
manera:
Operaciones preliminares
Encienda el televisor y seleccione la entrada de vídeo correspondiente
para conformar las conexiones a esta unidad.
Compruebe que la antena esté conectada correctamente.
1 Presione POWER.
Para que funcione el botón a distancia POWER, la alimentación
POWER debe estar activada.
Luego, la unidad procede al ajuste automático del reloj. El
temporizador se visualiza cuando finaliza.
Si se exhibe “Canal no encontrado...”, presione ENTER de nuevo.
La opción HL, (horario de ahorro de luz diurna), exhibe la
configuración de la hora de verano.
HUSO.H exhibe la diferencia horaria respecto a la hora de
Greenwich (GMT).
HHO (Hora estándar del Este) = GMT –5
HHC (Hora estándar central) = GMT –6
HHM (Hora estándar de las Rocosas) = GMT –7
HHP (Hora estándar del Pacífico) = GMT –8
HHA (Hora estándar de Alaska) = GMT –9
HHH (Hora estándar de Hawai) = GMT –10
Para otras zonas: xx hr
5 Presione ENTER.
Banda Canal
Modo TV
(Ondas de radio)
VHF 2-13
UHF 14-69
Modo CATV
(Cable)
VHF 2-13
CATV LOW BAND 95-99
CATV MID/SUPER BAND 14-36
CATV HYPER BAND 37-65
ULTRA BAND
66-94
100-125
SPECIAL CATV CHANNEL 1
English
Espa
ñol
Fran
çais
Select Language
Seleccione la Lengua
S
élection de Langue
Press ENTER
Pulse ENTER
Appuyer sur ENTER
4 Presione ENTER para iniciar la configuración
automática de canal.
Ajus. automát
En “Ajus. automát”
Canal 35
MENU
PARAR
Ajuste automático del reloj
4/4/2004 12:15 AM
HL---------------ACT
HUSO H.------HHO
Ajuste automático del reloj terminado.
Funcionamiento del televisor
El conector de la unidad es un conector HDMI de Tipo A.
AUDIO IN
R
L
El conector de la unidad es un conector HDMI de Tipo A.
Set Top Box (caja de conexión a Internet)
Cuando la entrada de señales de audio es
digital
Cuando la entrada de señales de audio es
analógica
Señal de VÍDEO compatible
Este terminal de entrada no está pensado para que se use con
computadoras.
Núm. de puntos (H × V) Frecuencia vertical de barrido (Hz)
1080i 1 920 × 1 080i 59.94 / 60
720p 1 280 × 720p 59.94 / 60
480p
720 × 480p
640 × 480p
59.94 / 60
59.94 / 60
480i 720 (1 440) × 480i 59.94 / 60
O
Set Top Box (caja de conexión a Internet)
Ajuste automático canal / reloj
Pulsar la tecla ENTER.
Conectar el cable de antena y si se usa una
caja cable, sintonizarla a su CA local PBS
luego...
3 Presione ENTER.
2 Presione ▲▼ para
seleccionar el idioma del
menú y presione ENTER.
82
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Si la unidad no ha podido ajustar el reloj
automáticamente
Fije la hora manualmente.
Cómo agregar y borrar canales
Agregue o borre canales, si no tiene ajustados los necesarios o
tiene fijados canales que no necesite.
1 Presione las teclas NUMBER para seleccionar un
canal.
p. ej. 5: [0] [5]
15: [1] [5]
115: [1] [1] [5]
Puede también usar CH ▲▼ cuando vaya a borrar un canal.
2 Presione ADD/DLT.
Para salir de la pantalla
Presione RETURN.
VCR Plus+ guide channel Settings
Ajuste estos canales de guía de manera que se pueda usar el
sistema VCR Plus+ para la grabación temporizada. Antes de
proceder a los ajustes, prepare el papel que muestra los canales,
los nombres de las estaciones y los canales de guía.
Nombre de la
estación
Canal de
guía
Número del
canal
Ajuste del canal
CBS 04 04 Innecesario
HBO 33 15
Introduzca el canal 15
sucesivo al canal de guía 33.
Nickelodeon 38 20
Introduzca el canal 20
sucesivo al canal de guía 38.
por ej.,
Mire en los canales de guía para las
estaciones en revistas.
Apunte todas las estaciones que
puede recibir.
Nota:
Si ha conectado una caja TV de cable o un receptor de satélite, sistema
VCR Plus+ no funciona como no ha ajustado los canales de la guía.
1 Presione MENU.
2 Presione ◄► para
seleccionar “Config.”
3 Presione ▲▼ para
seleccionar “Prog.
Canales” y presione
ENTER.
MENU
Aj. Config. Func.
Idioma
Prog.Canales
RELOJ
Bloqueo
Subtítulos
Ponga Títulos
Otro Ajuste
Si
PAJINA
VUELVE
ELIJA
4 Presione ▲▼ para
seleccionar “VCR PLUS+
Ajuste canal” y presione
ENTER.
5 Presione ▲▼ para
seleccionar el canal de
guía que quiere ajustar y
presione .
• Cuando seleccione el canal
guía, presione y mantenga
presionado ▲▼ para
desplazarse por la pantalla
hacia arriba y hacia abajo.
PROGRAM
CHANNEL
Sistema de la antena CATV
Ajus. automát. del canal
VCR Plus+ Ajuste canal
PROGRAM
CHANNEL
VCR Plus+ Ajuste canal
Canal de guía Canal CATV
125
1
2
3
- - -
- - -
- - -
- - -
6 Presione ▲▼ para seleccionar el canal
correspondiente al de guía y presione .
Para borrar un número, presione CANCEL.
Repita los pasos 5 y 6 para introducir otros canales.
7 Presione ENTER.
PROGRAM
CHANNEL
VCR Plus+ Ajuste canal
Canal de guía Canal CATV
4
5
6
7
8
- - -
- - -
- - -
- - -
- - -
Selección del modo de entrada
1 Presione INPUT.
La exhibición cambiará de la siguiente manera.
Sintonizador: Se exhibe la señal de fuente conectada al terminal
VHF/UHF.
Video 1: Se exhibe la señal de fuente conectada al terminal 1 de
entrada AV.
Video 2: Se exhibe la señal de fuente conectada al terminal 2 de
entrada AV.
Componente: Se exhibe la señal de fuente conectada al terminal de
entrada COMPONENT.
HDMI: Se exhibe la señal de fuente conectada al terminal de
entrada HDMI.
Video 1*
Componente*
Video 2*
HDMI*
Sintonizador*
Método 1:
1 Presione CH ▲▼.
La exhibición cambiará de la
siguiente manera.
(TV)
CH69
(CABLE)
CH125
(TV)
CH2
(CABLE)
CH1
Video 1*
Componente*
Video 2*
HDMI*
Método 2
83
Information
Controles ASPECT
NORMALCOMPLETOZOOMJUSTO
Esta función le permite poder ver la imagen en su tamaño máximo,
incluyendo la imagen panorámica de formato de cine.
1 Presione ASPECT para seleccionar el modo de
pantalla.
Modo Imagen Explicación
JUSTO
JUSTO
3
En el modo JUSTO una
imagen 4:3 se exhibirá en
su tamaño máximo pero
con una corrección de
aspecto aplicada a los lados
de la pantalla de modo
que el alargamiento sólo
se percibirá en los bordes
izquierdo y derecho de la
pantalla. El tamaño de la
imagen dependerá de la
señal original.
ZOOM
ZOOM
4
3
En el modo ZOOM la sección
central de la imagen se
ampliará.
COMPLETO
COMPLETO
4
3
En el modo COMPLETO la
imagen se exhibirá en su
tamaño máximo pero con un
ligero alargamiento.
NORMAL
NORMAL
3
4
En el modo NORMAL una
imagen 4:3 se exhibirá en
su tamaño estándar 4:3 sin
alargamiento.
Seleccione el canal que desee:
Presione las teclas CH ▲▼ o NUMBER.
Ajuste el nivel de volumen que desee:
Presione VOL + o VOL –.
Uso del botón CH/VOL
Cuando esté seleccionando canales de CABLE del 100 al 125 con
las teclas NUMBER.
1 Presione R-TUNE para exhibir el último canal que
estaba mirando.
Ejemplo 1:
Para seleccionar el canal 125, primero presione la tecla 1, luego
2, luego 5.
Ejemplo 2:
Para seleccionar el canal 12, primero presione la tecla 1, luego
2.
Ejemplo 3:
Para seleccionar el canal 2, primero presione la tecla 0, luego 2.
Sintonización rápida
Uso de la tecla Number
1 Presione MUTE para apagar instantáneamente el
sonido. Presione de nuevo para restaurar el sonido
a su nivel anterior.
Apagado del audio
Discos que sólo se pueden reproducir
Tipo de disco
Logotipo
del disco
Instrucciones
Indicación
en estas
instrucciones de
funcionamiento
DVD-Audio
Discos de música de alta
fidelidad
• Reproducidos en esta
unidad en 2 canales.
DVD-A
DVD-Vídeo
Discos de películas y
música de alta calidad
DVD-V
Vídeo CD
Música y video grabados
(incluyendo CD-R/RW)
VCD
Audio CD
Audio y música
grabados (incluyendo
CD-R/RW)
CD-R y CD-RW con
música grabada en MP3
(pág. 88)
CD
(CD-DA)
o
MP3
(MP3)
Funcionamiento del disco / tarjeta de
memoria
O
Discos que pueden grabarse y reproducirse
Tipo de disco
Logotipo del
disco
Indicación en estas
instrucciones de
funcionamiento
DVD-R
DVD-R
DVD-RAM
RAM
Tarjetas capaces de exhibir y guardar
Tipo de tarjeta Logotipo de tarjeta
Indication in these
operating instructions
Tarjeta de
Meemoria SD
SD
MultiMediaCard
1 Presione OPEN/CLOSE en la unidad para abrir la
bandeja e introducir un disco.
Presione el botón de nuevo para cerrar la bandeja.
Introduzca el disco con la
etiqueta en el lado superior.
Introduzca el disco en la guía
de la bandeja.
Disco sin cartucho
Introduzca el disco con la etiqueta en el
lado superior, con la flecha señalando
hacia el
interior.
Disco con cartucho
Introducción de un disco
Bandeja del disco.
Finalice* el disco después de grabarlo.
*Proceso que permite reproducir discos en equipos compatibles.
84
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Insertar/sacar la tarjeta
Sólo inserte o saque la tarjeta tras haber
apagado la unidad.
Cuando parpadea el indicador “SD” en la pantalla de la unidad,
quiere decir que se está leyendo de la tarjeta o escribiendo en
ella. No corte la alimentación ni saque la tarjeta, pues hacerlo
podría ocasionar un funcionamiento erróneo o pérdida del
contenido de la tarjeta.
Insertar una tarjeta
Inserte la tarjeta (con la etiqueta cara
arriba y la esquina recortada a la
derecha) y manténgala en su lugar
hasta que oiga un clic.
esquina
recortada
Sacar la tarjeta
Presione el centro de la tarjeta y a
continuación tire de ella y sáquela.
En los discos de dos caras, no es posible grabar de manera continua
desde una cara a la otra. Deberá expulsar el disco y darle la vuelta.
Cuando utilice DVD-RAM de 8 cm, saque el disco del cartucho.
Podrá grabar hasta 99 títulos en un solo disco.
Es posible grabar emisiones digitales que permiten “grabación única” al
utilizar discos DVD-RAM compatibles con CPRM. Y no será posible grabar
emisiones digitales que permitan “grabación única” al utilizar DVD-R.
Los DVD-RAM/DVD-R tienen limitaciones de grabación.
La grabación se realizará en el espacio disponible del disco. Los datos no
se sobrescribirán.
Si no queda espacio en el disco de grabación, debe borrar títulos que no
desee o usar un nuevo disco.
No se pueden grabar discos DVD-R finalizados.
1 Presione OPEN/CLOSE en la unidad para abrir la
bandeja e introducir un disco.
2 Presione las teclas CH ▲▼ o las teclas numéricas
para seleccionar el canal.
3 Presione REC MODE para seleccionar el modo de
grabación (XP, SP, LP o EP).
4 Presione REC para iniciar la grabación.
Para detener la grabación
Presione STOP.
• Se grabará como un título hasta la posición donde se detiene.
DVD-R
DVD-R la unidad tardará aproximadamente
30 segundos en completar la información de gestión de la
grabación cuando ésta haya finalizado.
Para realizar una pausa durante la grabación
Presione PAUSE.
Presione PAUSE de nuevo para reanudar la grabación.
Para seleccionar con las teclas numéricas
(NUMBER):
Para especificar una hora para detener la
grabación
Durante la grabación
Presione REC en la unidad o en el control remoto para
seleccionar la hora de grabación.
Cada vez que presione el botón:
* Para grabar sonido usando LPCM (solo es posible en modo XP):
Seleccione “LPCM” en “Modo Audio para grab. XP” (la calidad de la
imagen puede disminuir ligeramente).
OFF 0:30 1:00 1:30
2:004:00 3:00
DVD-RRAM
SP
XP*
LP EP
Grabación de programas de televisión
Modos de grabación y tiempo aproximado
de grabación
Según el contenido a ser grabado, los tiempos de grabación
pueden salir más cortos que los señalados.
Nota:
Cuando se graba en DVD-RAM usando el modo EP (8H), la reproducción
puede no ser posible en unidades DVD que sean compatibles con DVD-
RAM. En este caso utilice el modo EP (6H).
EP (6 H)
*2
XP
SP
LP
EP (8 H)
Calidad de imagen
Tiempo de la grabación
DVD-RAM
DVD-R
(4,7 GB)
De un solo lado
(4,7 GB)
Doble lado
(9,4 GB)
XP (Alta calidad) 12
*1
1
SP (Normal) 24
*1
2
LP (Larga duración) 48
*1
4
EP (Reproducción de
muy larga duración)
8 (6
*2
) 16*1 (12
*1*2
)8 (6
*2
)
Disc
Recording
Mode
*1
El tiempo de grabación de un disco a doble cara es la suma total de las
dos caras del disco.
*2
Cuando en el menú SETUP se ha ajustado a “EP (6H)” el “Tiempo de
grab. en el modo EP”. La calidad del sonido se baja, en comparación con
otros modos de grabación, cuando se usa “EP (8H)”.
(Unidad: hora)
p. ej., 5: [0] [5]
15: [1] [5]
115: [1] [1] [5]
85
Information
Puede introducir hasta 16 programas con un adelanto de un mes.
Precauciones en la grabación temporizada
Cuando llega el tiempo que se definió, la grabación
temporizada inicia automáticamente.
• La grabación temporizada puede iniciar mientras la unidad
está tanto apagada como encendida. Cuando la unidad está
apagada, el sonido y el vídeo no salen en el televisor.
DVD-RRAM
Grabacione con temporizador
1:58 SPTiempo grabación restante
3/29 LUN 12:53 PM
GRABACION
TEMP.
MODO
DESACTCANAL FECHA
39
Nuevo programa
5:10 PM4:20 PM SP
VERIF
Habilitar
01 3/29 LUN
Uso del sistema VCR Plus+
Una forma fácil de grabar con temporitzador es ingresando
número de VCR Plus+. Puede encontrar estos códigos en las
programaciones televisivas de periódicos y revistas.
1 Presione VCR Plus+.
2 Presione las teclas
NUMBER para introducir
el número PlusCode.
• Presione para volver a la cifra
correcta.
3 Presione ENTER.
4 Presione ENTER.
Se almacena la configuración.
5 Presione RETURN.
• “ ” se iluminará en el panel delantero para indicar que se ha
activado el modo de espera de la grabación con temporizador.
Para cancelar la grabación una vez que ya ha comenzado la
grabación, mantenga presionado el STOP durante unos pocos
segundos.
Repita los pasos 1~4 para programar otras grabaciones.
1:58 SPVCR Plus+ Tiempo grabación restante
3/29 LUN 12:53 PM
Introducir el número de código PLUS
utilizando la tecla 0-9.
09
1:58 SPTiempo grabación restante
3/29 LUN 12:53 PM
GRABACION
TEMP.
MODO
DESACTCANAL FECHA
5:10 PM4:20 PM3/29 LUN 39 SP
Intr.ir nomb.
1 Presione PROG/CHECK.
2 Presione ▲▼ para seleccionar “Nuevo programa” y
presione ENTER.
Programación manual
1:58 SPTiempo grabación restante
3/29 LUN 12:53 PM
GRABACION
TEMP.
64
Nuevo programa
5:10 PM4:20 PM SP
Habilitar
01 3/29 LUN
Pulsar ENTER o VCR Plus+ para
introducir un nuevo programa.
MODO
DESACTCANAL FECHA
VERIF
La línea resaltada
estará preparada para la
programación.
1:58 SPTiempo grabación restante
3/29 LUN 12:53 PM
GRABACION
TEMP.
64 5:10 PM4:20 PM SP
Habilitar
01 3/29 LUN
MODO
DESACTCANAL FECHA
VERIF
Nuevo programa
64 8:00 PM7:00 PM SP
Habilitar
02 4/5 LUN
• FECHA
Fecha
Temporizador diario
Temporizador semanal
Fecha actual hasta un mes más tarde
menos un día
DOM–SAB LUN–SAB LUN–VIE
DOM SEMANAL --- SAB SEMANAL
4 Presione ENTER.
3 Presione para desplazar y cambiar los detalles
con ▲▼.
5 Presione RETURN.
• “ ” se iluminará en el panel delantero para indicar que se ha
activado el modo de espera de la grabación con temporizador.
Para cancelar la grabación una vez que ya ha comenzado la
grabación, mantenga presionado el STOP durante unos pocos
segundos.
1:58 SPTiempo grabación restante
3/29 LUN 12:53 PM
GRABACION
TEMP.
MODO
DESACTCANAL FECHA
8:00 PM7:00 PM4/5 LUN64
Intr.ir nomb.
SP
Repita los pasos 2~4 para programar otras grabaciones.
Controle, cambie o borre el programa
1 Presione PROG/CHECK.
Para cambiar un programa
Presione ▲▼ para seleccionar el programa y luego presione
ENTER.
Presione ◄► para desplazarse por las opciones y cambiarlas
con ▲▼, y a continuación presione ENTER.
Para borrar un programa
Presione ▲▼ para seleccionar el programa y a continuación
presione CANCEL.
• No puede borrar programas que se estén grabando en este
momento.
Para poner la unidad en el modo de espera de
grabación con temporizador
Presione RETURN.
• “ ” se iluminará en el panel delantero para indicar que se ha
activado el modo de espera de la grabación con temporizador.
2 Presione RETURN.
La lista de grabación con temporizador desaparece.
86
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
1 Presione PLAY/×1.3 durante la grabación o la
grabación temporizada.
Reproducción seguida
Es posible empezar la reproducción desde el comienzo de un
título mientras lo sigue grabando.
1 Presione DIRECT NAVIGATOR durante la grabación
o la grabación temporizada.
2 Presione ▲▼◄► para seleccionar el título y
presione ENTER.
Grabación y reproducción simultáneas
Es posible comenzar la reproducción del título que se está
grabando o reproducir un título grabado anteriormente.
1 Presione TIME SLIP durante la grabación o la
grabación temporizada.
La reproducción comienza a partir de los 30 segundos anteriores
a ese momento. Lo que se esté grabando en este momento
aparecerá como una imagen incrustada; asimismo oirá el audio de la
reproducción.
2 Presione ▲▼ para seleccionar el tiempo y presione
ENTER.
Time Slip
Es posible reproducir el título que se está grabando para
controlar su correcta grabación. Es también posible controlar las
partes grabadas anteriormente.
Reproducción durante la grabación
RAM
1 Presione OPEN/CLOSE en la unidad para abrir la
bandeja e introducir un disco.
Presione el botón de nuevo para cerrar la bandeja.
2 Presione PLAY/×1.3
La unidad tardará un cierto tiempo en leer el disco antes de iniciar la
reproducción.
Detener la reproducción
Presione STOP.
• Presione STOP de nuevo para volver a la pantalla de
televisión.
DVD-V
DVD-A
CD
VCD
MP3
• Cuando el mensaje “PLAY” parpadee en la pantalla delantera,
la función de reanudación estará activada.
• El protector de pantalla puede aparecer cuando se detiene
la reproducción. Presione STOP de nuevo y podrá utilizar el
sintonizador de esta unidad para ver televisión.
Pausar la reproducción
Presione PAUSE.
• Presione PAUSE de nuevo para reanudar la reproducción.
DVD-A VCD CDDVD-R DVD-VRAM MP3
Reproducción de discos
Para cancelar la función de reanudación (sólo en
reproducción normal)
Presione STOP mientras la unidad recuerda la posición. (La
posición también se borrará cuando apague la unidad o abra la
bandeja del disco.)
Iniciar la reproducción desde el punto en que
se detuvo (función de reanudación)
DVD-A VCD CDDVD-R DVD-VRAM MP3
1 Presione STOP durante la reproducción.
El mensaje “PLAY” parpadea en la pantalla de la unidad (únicamente
en la reproducción normal). La unidad memorizará la posición.
2 Presione PLAY/×1.3
La reproducción se iniciará desde el punto en que se detuvo.
Selección de programas grabados (títulos)
para reproducirlos
1 Presione DIRECT
NAVIGATOR.
2 Presione ▲▼◄► para seleccionar el título y
presione ENTER.
También puede seleccionar títulos con las teclas de número.
Para detener la reproducción
Presione STOP.
Para salir de la pantalla
Presione RETURN o DIRECT NAVIGATOR.
Avance rápido y rebobinado (búsqueda)
1 Presione ►► FF/SLOW o ◄◄ REW/SLOW durante la
reproducción.
Presione los botones ►►Ι o Ι◄◄ de la unidad y manténgalos presionados.
La velocidad se incrementará hasta un máximo de 5 pasos.
Presione PLAY/×1.3 para volver a la velocidad normal.
Repr.
SUB MENU
07 08
- -
- - - - - -
10 10/27 Lun 8 10/27 Lun
Ant. Sig.
Seleccionar
DIRECT NAVIGATOR Vista titulo
DVD-RAM
02/02
Si introduce un número mayor que el número total de títulos, se
seleccionará el último título.
DVD-RRAM
p.ej., 5: [0] [5] 15: [1] [5]
DVD-A VCD CDDVD-R DVD-VRAM MP3
Iconos de la pantalla de DIRECT NAVIGATOR
:
Título protegido.
:
Título que no se grabó durante la protección de grabación (emisiones
digitales, etc.).
:
Título que no puede reproducirse porque los datos están dañados.
:
Grabando actualmente.
87
Information
Saltar pistas
1 Presione SKIP ►►Ι o SKIP Ι◄◄ durante la
reproducción o en el modo de pausa.
En la unidad, presione ►►Ι o Ι◄◄ .
Cada vez que presione estos botones, el número de saltos se
incrementará.
Avanzar un minuto (salto CM)
1 Presione CM SKIP durante la reproducción.
La reproducción se reanudará al cabo de aproximadamente un
minuto.
DVD-A VCD CDDVD-R DVD-VRAM MP3
DVD-RRAM
Nota:
Si el inicio del programa siguiente está dentro de un minuto desde el
punto en que saltó, la reproducción se reiniciará desde el principio de ese
programa.
Inicio desde un elemento seleccionado
p.ej., 5: [0] [5]
15: [1] [5]
MP3
p.ej., 5: [0] [0] [5]
15: [0] [1] [5]
115: [1] [1] [5]
Reproducción en cámara lenta
1 Presione ►► FF/SLOW o ◄◄ REW/SLOW con la
reproducción en pausa.
Presione los botones ►►Ι o Ι◄◄ de la unidad y manténgalos presionados.
Cuando la reproducción en cámara lenta continúa durante
aproximadamente 5 minutos, se pondrá en pausa automáticamente.
Para volver a la velocidad normal
Presione PLAY/×1.3.
Iniciar la reproducción desde un título, capítulo o pista
seleccionados.
DVD-A VCD CDDVD-R DVD-VRAM MP3
1 Presione las teclas NUMBER para seleccionar el
elemento durante la reproducción o cuando esté
detenida.
DVD-A
VCD
DVD-R
DVD-V
RAM
(Sólo partes de imagen animada)
Vista rápida
Para volver a la velocidad normal
Presione PLAY/×1.3.
RAM
(Sólo con Dolby Digital)
La velocidad de reproducción puede incrementarse sin distorsionar
el audio.
1 Presione PLAY/x1.3 y manténgalo presionado
durante la reproducción.
Visualización fotograma a fotograma
1 Presione FRAME ΙΙ► o FRAME ◄ΙΙ con la
reproducción en pausa.
Para volver a la velocidad normal
Presione PLAY/×1.3.
Exhibición de la imagen de televisión como
imagen incrustada
1 Presione TIME SLIP durante la reproducción.
La unidad exhibe la imagen del televisor como imagen incrustada
Oirá el audio de la reproducción.
Presione TIME SLIP de nuevo para cancelar.
Para mostrar las imágenes reproducidas
completas
Presione TIME SLIP.
DVD-A
VCD
DVD-R
DVD-V
RAM
(Sólo partes de imagen animada)
DVD-RRAM
Saltar hasta la hora especificada (Time Slip)
1 Presione TIME SLIP
durante la reproducción.
2 Presione ▲▼ para seleccionar la hora mientras se
muestra la indicación.
El indicador de tiempo se apagará al cabo de 5 segundos, pero se
volverá a encender cuando configure el indicador.
• Presione ▲▼ para cambiar el tiempo en unidades de un minuto.
Presione ▲▼ y manténgalos presionados para cambiar el tiempo en
unidades de 10 minutos.
3 Presione ENTER.
La reproducción saltará hasta la hora especificada.
REPR.
0 min
DVD-RRAM
Para borrar un programa que se esté
reproduciendo
1 Presione ERASE durante la reproducción.
Se exhibirá una pantalla de confirmación.
2 Presione ◄►para seleccionar “Borrar” y luego
presione ENTER.
Borrar
Borrar Cancelar
Tiempo grabación restante 2:40(EP)
Se borrará el respectivo capítulo
de la LISTA DE REPRODUCCION.
Puede borrar títulos mientras se están reproduciendo.
DVD-RRAM
88
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
G 8
T 14
TOTAL
40
/
111
MENU
0 9
ARBOL
G 7/25
música MP3
001 Mis favoritos
001 Pop brasileño
002 Pop chino
003 Pop checo
004 Pop húngaro
005 Notas de línea
006 Pop japonés
007 Pop mexicano
008 Pop filipino
009 Pop sueco
001 Momoko
002 Número estándar
001 Solo de piano
002 Vocal
TOTAL PISTA
ARBOL
G 1
T 1
TOTAL
1
/
111
MENU
0 9
GRUPO
Ant. Sig.
001 Ambos extremos congelados
002 Estrella de mar
003 Vida en Júpiter
004 Pegamento metálico
005 Píntalo de amarillo
006 Pyjamamama
007 Camarones de Marte
008 Starperson
009 Velvet Cuppermine
010 Estrella de mar Ziggy
1
2
3
4
5
6
7
8
9
10
1 : Mis favoritos
Esta unidad puede reproducir archivos MP3 grabados en CD-R/RW
con un computador. Los archivos tratados como pistas y carpetas
se tratarán como grupos.
2 Presione ▲▼ para seleccionar la pista y presione
ENTER.
La reproducción seguirá hasta la última pista en el último grupo.
• “
” indica la pista que se está reproduciendo.
También puede seleccionar la pista con las teclas numéricas.
Grupo seleccionado
Para mostrar otras páginas
Presione ▲▼◄► para seleccionar “Ant.” o “Sig.” y presione
ENTER.
• Después de especificar en una lista todas las pistas de un
grupo, aparecerá la lista del grupo siguiente.
Para salir de la pantalla
Presione RETURN o TOP MENU.
2 Presione para visualizar la pantalla con estructura
de árbol mientras se muestra la lista de archivos.
Presione ▲▼◄► para seleccionar un grupo y
presione ENTER.
Aparecerá la lista de archivos del grupo.
No podrá seleccionar grupos que
contengan archivos no compatibles.
Nº de grupos seleccionado/nº total
de grupos.
Si el grupo no tiene ninguna pista,
se mostrará “_ _” como número de
grupo.
Utilizar menús para reproducir MP3
1 Presione TOP MENU durante la reproducción o el
modo detenido.
G: Grupo n.°
T: n.° de pista en el grupo
TOTAL: n.° de pista./n.° total de pistas
en todos los grupos
MP3
0002
- - - - - - - -- - - -- - - -
001/001
Carpeta 100_PANA
Ant. Sig.
00030001 0004
0006 0007 00080005
DIRECT NAVIGATOR Vista de im.(JPEG)
IMAGEN
Repr.
SUB MENU Seleccionar
SD CARD
Reproducción de imágenes fijas de la tarjeta
o DVD-RAM
4 Presione ▲▼◄►para seleccionar la imagen fija y
presione ENTER.
Puede también seleccionar títulos con las teclas NUMBER.
Para detener la reproducción
Presione STOP.
Para salir de la pantalla
Presione DIRECT NAVIGATOR.
1 Inserte un DVD-RAM o una tarjeta.
2 Presione SD o DVD para seleccionar la unidad.
3 Presione DIRECT NAVIGATOR.
RAM
Presione ▲▼◄► para seleccionar la pestaña “IMAGEN” y a
continuación presione ENTER.
p.ej., Tarjeta
5 Presione ▲▼◄► para
seleccionar “Carpeta” y
presione ENTER.
6 Presione ▲▼ para seleccionar la carpeta y presione
ENTER.
Puede también seleccionar títulos con las teclas NUMBER.
0002
- - - - - - - -- - - -- - - -
001/001
Carpeta 100_PANA
Ant. Sig.
00030001 0004
0006 0007 00080005
DIRECT NAVIGATOR Vista de im.(JPEG)
IMAGEN
Repr.
SUB MENU Seleccionar
SD CARD
RAM SD
p.ej., 5: [0] [0] [0] [5]
15: [0] [0] [1] [5]
115: [0] [1] [1] [5]
1115: [1] [1] [1] [5]
Para seleccionar las imágenes fijas de otra
carpeta
p.ej., 5: [0] [0] [5]
15: [0] [1] [5]
115: [1] [1] [5]
Funciones útiles durante la reproducción de
imágenes fijas
RAM SD
1 Presione ▲▼◄►para seleccionar una imagen en
la pantalla DIRECT NAVIGATOR y a continuación
presione ENTER.
La imagen seleccionada se exhibe en la pantalla completa.
2 Presione SUB MENU.
3 Presione ▲▼ para seleccionar “Girar a DERECHA”
o “Girar a IZQUIERDA” y presione ENTER.
Girar
Acercar con zoom/Alejar con el zoom
(Sólo para imagen fija con número bajo de píxeles)
1 Presione ▲▼◄►para seleccionar una imagen en la
pantalla DIRECT NAVIGATOR y presione ENTER.
2 Presione SUB MENU.
3 Presione ▲▼ para seleccionar “Acercar con zoom”
y presione ENTER.
Para devolver a la imagen su tamaño original, presione ▲▼ para
seleccionar “Alejar con el zoom” en el paso 3 y a continuación
presione ENTER.
Utilizar la pantalla con estructura de árbol para encontrar un
grupo
Utilizar la pantalla con estructura de árbol para encontrar una
pista.
p.ej., 5: [0] [0] [5] 15: [0] [1] [5]
89
Information
DVD
SD
Reproducir
Grabar
Copiado
/ Editar
Configurar
PROTECCIÓN DEL DISCO DES
LENGÜETA DE PROTECCIÓN DES
DVD-RAM
DIRECT NAVIGATOR
GRABACION TEMP.
COPIA
LISTA REPR.
SETUP
GRABACION FLEX.
CONF. DISCO
1 Presione MENU en modo de detención y a
continuación presione ◄► para seleccionar “Func.”
2 Presione ENTER.
3 Presione ▲▼◄► para seleccionar “CONF. DISCO”
o “AJUSTE TARJETA” y presione ENTER.
e. pj., DVD-RAM
Formatear un disco/Formatear una tarjeta
Notas:
El formateo borra todo el contenido de un disco, incluyendo los datos del
computador. Compruébelos cuidadosamente antes de formatear.
Algunos DVD-RAM no tienen formato. Formatéelos antes de utilizarlos en
esta unidad. El formateo también le permite borrar todo el contenido de un
disco.
Para detener el formateo
Presione RETURN.
4 Presione ▲▼ para
seleccionar “Formateo
del disco” o “Formatear”
y presione ENTER.
5 Presione ◄► para
seleccionar “Sí” y
presione ENTER.
6 Presione ◄► para
seleccionar “Iniciar” y
presione ENTER.
Aparecerá un mensaje cuando
haya finalizado el formateo.
7 Presione ENTER.
Notas:
No apague la unidad ni desconecte el cable de alimentación de CA
mientras el mensaje “Formateando el disco” aparezca en el televisor.
Si lo hace, es posible que el disco no pueda utilizarse. (Este proceso
puede tardar hasta un máximo de 70 minutos (DVD-RAM). Si tarda más
de 2 minutos, puede cancelarlo pulsando RETURN. En este caso, el disco
deberá formatearse de nuevo).
Todos los datos del disco se borrarán cuando se formatee, incluyendo
grabaciones realizadas con esta unidad. Los datos escritos en el disco
mediante un computador también se borrarán.
Cuando un disco se ha formateado mediante esta unidad, es posible que
no sea posible utilizarlo en ningún otro equipo.
El disco no podrá formatearse si la lengüeta de protección contra escritura
está en la posición protegida (PROTECT). Retire la protección para
continuar.
• La tarjeta SD no puede formatearse si la protección contra escritura se
cambia a “LOCK”. Quite la protección para continuar.
• Si se intenta formatear discos que esta unidad no puede usar, aparecerá
el mensaje “Formateo imposible.
Los DVD-R y los CD-R/RW no pueden formatearse.
CONF. DISCO
Títulos 11
Usado 0:22
Espacio 5:38(EP)
DVD-RAM
Formateo del disco
No
Formatear el disco borrará los contenidos.
Este proceso durará 1 minuto aprox.
¿ Iniciar formateo del disco ?
DVD-RAM
Iniciar Cancelar
CONF. DISCO
Títulos 11
Usado 0:22
Espacio 5:38(EP)
Formateo del disco
Todos los contenidos del disco se borrarán.
¿ Iniciar formateado del disco ?
RAM SD
Finalizar un disco
Puede reproducir DVD-R en reproductores DVD compatibles
finalizándolos en esta unidad y convirtiéndolos en DVD de
vídeo que cumplan con los estándares de DVD de vídeo.
4 Presione ▲▼ para
seleccionar “Cerrar” y
presione ENTER.
5 Presione ◄► para
seleccionar “Sí” y
presione ENTER.
Antes de la
finalización
Después de la
finalización
Pantalla del disco en esta
unidad
DVD-R DVD-V
Grabación/edición/introducción
de nombres
×
Reproducción en otros
reproductores DVD
×
Es posible que los DVD-R finalizados en esta unidad no puedan leerse en
otros reproductores DVD debido a la condición de la grabación.
6 Presione ◄► para
seleccionar “Iniciar” y
presione ENTER.
La finalización se iniciará.
Cuando la finalización haya
terminado, aparecerá un
mensaje.
Notas:
No desconecte el cable de alimentación de la CA mientras el mensaje
“Finalizando el disco” aparezca en el televisor. Si lo hace, el disco no
podrá utilizarse.
El proceso de finalización puede tardar hasta 15 minutos.
Sólo podrá finalizar DVD-R que se hayan grabado en esta unidad.
No podrá grabar en DVD-R que se hayan finalizado
Después de la finalización
- El disco sólo podrá reproducirse y ya no podrá grabar en él ni editarlo.
- Los DVD-R finalizados en esta unidad no pueden reproducirse en otros
reproductores DVD debido a la condición de la grabación.
- Se producirá una pausa de varios segundos entre los títulos.
- Los títulos se dividen en capítulos de unos 5 minutos*.
Este tiempo puede variar en gran medida en función de la condición y el
modo de la grabación.
Visite la página principal de Panasonic para obtener más información
acerca de los DVD.
Para EEUU: http://www.panasonic.com/playDVD-R
Para Canadá: http://www.panasonic.ca
7 Presione ENTER.
DVD-R
CONF. DISCO
Títulos 11
Usado 0:22
Espacio 5:38(EP)
Cerrar
No
Este proceso durará xx minutos aprox.
¿ Es correcto cerrar el disco ?
DVD-R
(Únicamente para DVD-R grabados en esta unidad)
1 Presione MENU en modo de detención y a
continuación presione ◄► para seleccionar “Func.”
2 Presione ENTER.
3 Presione ▲▼◄► para seleccionar “CONF. DISCO”
y presione ENTER.
DVD-R
CONF. DISCO
Títulos 11
Usado 0:22
Espacio 5:38(EP)
Cerrar
Iniciar Cancelar
Si se cierra el disco,
sólo podrá reproducirse.
¿ Es correcto cerrar el disco ?
90
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Index
A
About LCD Panel ............................................................................ 2
Accessories .................................................................................... 2
AC Power Plug ............................................................................. 14
Adding and deleting channels ...................................................... 22
ASPECT Controls ......................................................................... 26
Audio Adjust ................................................................................. 31
AUDIO LEVELER .................................................................... 32
BASS, TREBLE, BALANCE, SURROUND, D.ENHANCER .... 31
HDMI ........................................................................................ 32
MODE ...................................................................................... 31
STEREO / SAP / MONO .......................................................... 32
Audio Mode for TV Viewing .......................................................... 27
Receivable Broadcast Types ................................................... 27
Audio Mute ................................................................................... 26
Audio Out connector ..................................................................... 14
Automatic Channel Setting ........................................................... 22
B
Before Requesting Service ........................................................... 72
Before using Disc/Card Functions ................................................ 34
Blocking Message ........................................................................ 30
C
Change Language Setting ............................................................ 24
Changing audio during play .......................................................... 48
Changing the unit’s settings ......................................................... 67
To Return to the Factory Settings ............................................ 67
Chapter operations (Direct Navigator) .......................................... 53
Combine Chapters ................................................................... 53
Divide Chapter ......................................................................... 53
Erase Chapter .......................................................................... 53
Chapter operations (Play list) ....................................................... 59
Add Chapter ............................................................................. 59
Combine Chapters ................................................................... 59
Divide Chapter ......................................................................... 59
Erase Chapter .......................................................................... 59
Move Chapter .......................................................................... 59
Clock Settings .............................................................................. 23
Auto Clock Setting ................................................................... 23
Manual Clock Setting ............................................................... 23
Time Zone Adjust ..................................................................... 23
Closed Caption System ................................................................ 30
Common procedures .................................................................... 49
Disc menu ................................................................................ 49
Play menu ................................................................................ 50
Component signal Input connector ............................................... 14
Connecting the “1, 2” AV Input Terminals .................................... 16
Connecting the Audio Output Terminal ........................................ 18
Connecting the COMPONENT VIDEO Input Terminals ............... 16
Connecting the Headphones / Earphones Jack ........................... 20
Connecting the RF in Terminal ..................................................... 15
Copy All Pictures .......................................................................... 66
Create chapters ............................................................................ 48
Creating play lists ......................................................................... 57
Customer Services Directory ........................................................ 79
D
Disc setting/Card setting .............................................................. 60
Disc Name ............................................................................... 60
Disc Protection ......................................................................... 60
Erase all titles ........................................................................... 60
Finalize ..................................................................................... 62
Format Disc/Format Card ........................................................ 61
Select First play ....................................................................... 61
Displaying the television image as a picture-in-picture ................ 46
DVD/SD Functions Window ......................................................... 35
E
Editing Still Pictures ...................................................................... 55
Editing still pictures folders ........................................................... 56
Editing titles/chapters and playing chapters ................................. 51
Entering text ................................................................................. 63
F
Fast forward and rewind (Search) ................................................ 45
Finalize ......................................................................................... 62
Flexible Recording (FR) ............................................................... 39
Format Disc/Format Card ............................................................. 61
Frame-by-frame viewing ............................................................... 46
G
Glossary ....................................................................................... 70
H
HDMI Connection ......................................................................... 17
HDMI Input connector .................................................................. 14
I
Important Safety Instructions .......................................................... 4
Information (Card) ........................................................................ 11
Card Handling .......................................................................... 11
SD Memory Card Write Protection ........................................... 11
Still Pictures ............................................................................. 11
Still picture folder structure ...................................................... 11
Information (Disc) ........................................................................... 8
Discs or Card you can use ......................................................... 9
Discs you can use for recording and play .................................. 9
Disc Composition Examples .................................................... 10
Disc Handling ........................................................................... 10
Play-only discs ........................................................................... 8
Region Management Information ............................................. 10
Which should I use, DVD-RAM or DVD-R? ............................. 10
Information (MP3) ......................................................................... 11
Naming folders and files .......................................................... 11
Tips for making MP3 discs ....................................................... 11
Information (Unit) ............................................................................ 8
DST (Daylight Saving Time) ...................................................... 8
Loading the Batteries ................................................................. 8
Initial Setup (Ready to Play) ......................................................... 21
Input Label .................................................................................... 28
Inserting/Removing the Card ........................................................ 34
Inserting a Disc ............................................................................. 34
Installation ...................................................................................... 2
L
Language Code List ..................................................................... 69
Limited Warranty .......................................................................... 78
91
Information
M
Maintenance ................................................................................. 76
O
Optical digital Audio Out connector .............................................. 14
Other Adjust ................................................................................. 33
3D Y/C ..................................................................................... 33
COLOR MATRIX ...................................................................... 33
FRONT DISPLAY .................................................................... 33
MPEG NR ................................................................................ 33
POWER SAVE ......................................................................... 33
VIDEO NR ................................................................................ 33
P
Phones Jack ................................................................................. 14
Picture Adjust ............................................................................... 32
ADVANCED ADJUST .............................................................. 33
BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT,
SHARPNESS, AI PICTURE, COLOR TEMP ........................... 32
PIC MODE ............................................................................... 32
Picture and folder operations ....................................................... 56
DPOF ....................................................................................... 56
Erase Picture/Erase Whole Folder ........................................... 56
Folder Name ............................................................................ 56
Set up Protection/Cancel Protection ........................................ 56
Start Slide Show/Slide Interval ................................................. 56
Playing discs ................................................................................ 44
Starting play from where you stopped it (Resume Function) ... 44
When a menu screen appears on the television ...................... 44
Playing play lists ........................................................................... 58
Playing still pictures on the Card or DVD-RAM ............................ 54
Playing while you are recording ................................................... 42
Chasing playback ..................................................................... 42
Simultaneous Recording and Play ........................................... 42
Time Slip .................................................................................. 42
Play list operations ....................................................................... 59
Edit Change Thumbnail ....................................................... 59
Edit Copy ............................................................................. 59
Edit Create .......................................................................... 59
Edit Enter Name .................................................................. 59
Erase ........................................................................................ 59
Properties ................................................................................. 59
Position/Size ................................................................................. 26
Q
Quick View ................................................................................... 46
Q & A ............................................................................................ 76
R
Rapid Tune ................................................................................... 25
Recording and Playing Back a Closed Caption Program ............. 31
Recording from a video cassette recorder ................................... 43
Recording television programs ..................................................... 38
Recording modes and approximate recording times ............... 39
Remote Control Buttons ............................................................... 12
Reset all unit Memory Functions .................................................. 24
S
Selecting audio to record .............................................................. 39
Selecting Input Mode .................................................................... 25
Selecting recorded programs (titles) to play ................................. 45
Skipping ........................................................................................ 45
Skipping a minute forward (CM Skip) ........................................... 45
Skipping the specified time (Time Slip) ........................................ 46
Sleep Timer .................................................................................. 25
Slow-motion playback .................................................................. 46
Specifications ............................................................................... 77
Starting from a selected item ........................................................ 46
Status messages (Disc) ............................................................... 35
T
Table of Contents ........................................................................... 3
Timer Recording ........................................................................... 40
Check, change or delete a program ......................................... 41
Manually programming ............................................................ 40
Using VCR Plus+ system ......................................................... 40
Title operations (Direct Navigator) ................................................ 52
Edit Change Thumbnail ....................................................... 53
Edit Divide Title ................................................................... 53
Edit Enter Name .................................................................. 52
Edit Set up Protection/Cancel Protection ............................ 52
Edit Shorten ......................................................................... 52
Erase ........................................................................................ 52
Properties ................................................................................. 52
To display information about the Still Pictures ............................. 54
To erase a program that is being played back ............................. 47
To View a Blocked Program/Movie .............................................. 30
Transferring (dubbing) still pictures .............................................. 64
TV Status & Clock Display ........................................................... 27
U
Unit Buttons .................................................................................. 13
Useful functions during still picture play ....................................... 55
Erase ........................................................................................ 55
Rotate ...................................................................................... 55
Zoom in/Zoom out .................................................................... 55
Using menus to play MP3 ............................................................ 47
Using the CH/VOL Button ............................................................ 25
Using the NUMBER keys ............................................................. 25
V
V-Chip Control Features ............................................................... 28
VCR Plus+ guide channel Settings .............................................. 24
VHF/UHF Antenna Input terminal ................................................. 14
Video Input 1, 2 connector ........................................................... 14
VIDEO NR .................................................................................... 33
W
Warning and Instruction Displays ................................................. 71
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094
Panasonic Sales Company (“PSC”),
Division of Matsushita Electric of Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Printed in Japan
LSQT0853 A
S0904-0
P
LSQT0853 A
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92

Panasonic TC 22LR30 Manual de usuario

Categoría
Reproductores de DVD
Tipo
Manual de usuario
Este manual también es adecuado para

en otros idiomas