Yamaha DVD-S1700B Manual de usuario

Marca: Yamaha

Modelo: DVD-S1700B

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Este manual también es adecuado para

DVD-S1700

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

DVD AUDIO/VIDEO SA-CD PLAYER

LECTEUR DE DVD AUDIO/VIDEO SA-CD

DVD-S1700

HDMI AUDIO DIRECT

STANDBY

Printed in China CQX1A1126Z

00cv_DVD-S1700_U.fm Page 1 Wednesday, June 28, 2006 4:24 PM

IMPORTANT SAFETY INSTRUCTIONS

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert you to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert you to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

1 Read Instructions — All the safety and operating instructions

should be read before the product is operated.

2 Retain Instructions — The safety and operating instructions

should be retained for future reference.

3 Heed Warnings — All warnings on the product and in the

operating instructions should be adhered to.

4 Follow Instructions — All operating and use instructions should

be followed.

5 Cleaning — Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

6 Attachments — Do not use attachments not recommended by the

product manufacturer as they may cause hazards.

7 Water and Moisture — Do not use this product near water — for

example, near a bath tub, wash bowl, kitchen sink, or laundry

tub; in a wet basement; or near a swimming pool; and the like.

8 Accessories — Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may fall, causing

serious injury to a child or adult, and serious damage to the

product. Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the product.

Any mounting of the product should follow the manufacturer’s

instructions, and should use a mounting accessory recommended

by the manufacturer.

9 A product and cart combination should be moved

with care. Quick stops, excessive force, and uneven

surfaces may cause the product and cart

combination to overturn.

Ventilation — Slots and openings in the cabinet are

provided for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these openings must

not be blocked or covered. The openings should never be blocked

by placing the product on a bed, sofa, rug, or other similar surface.

This product should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

11 Power Sources — This product should be operated only from the

type of power source indicated on the marking label. If you are

not sure of the type of power supply to your home, consult your

product dealer or local power company. For products intended to

operate from battery power, or other sources, refer to the

operating instructions.

12 Grounding or Polarization — This product may be equipped with

a polarized alternating current line plug (a plug having one blade

wider than the other). This plug will fit into the power outlet only

one way. This is a safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the plug. If the plug should

still fail to fit, contact your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of the polarized plug.

13 Power-Cord Protection — Power-supply cords should be routed

so that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to cords

at plugs, convenience receptacles, and the point where they exit

from the product.

14 Lightning — For added protection for this product during a

lightning storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and disconnect the

antenna or cable system. This will prevent damage to the product

due to lightning and power-line surges.

15 Power Lines — An outside antenna system should not be located

in the vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines or

circuits. When installing an outside antenna system, extreme care

should be taken to keep from touching such power lines or

circuits as contact with them might be fatal.

16 Overloading — Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result in a risk of fire

or electric shock.

17 Object and Liquid Entry — Never push objects of any kind into

this product through openings as they may touch dangerous

voltage points or short-out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the product.

Servicing — Do not attempt to service this product yourself as

opening or removing covers may expose you to dangerous voltage

or other hazards. Refer all servicing to qualified service personnel.

19 Damage Requiring Service — Unplug this product from the wall

outlet and refer servicing to qualified service personnel under the

following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the

product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified

technician to restore the product to its normal operation,

e) If the product has been dropped or damaged in any way,

and

f) When the product exhibits a distinct change in

performance - this indicates a need for service.

20 Replacement Parts — When replacement parts are required, be

sure the service technician has used replacement parts specified

by the manufacturer or have the same characteristics as the

original part. Unauthorized substitutions may result in fire,

electric shock, or other hazards.

21 Safety Check — Upon completion of any service or repairs to

this product, ask the service technician to perform safety checks

to determine that the product is in proper operating condition.

22 Wall or Ceiling Mounting — The unit should be mounted to a

wall or ceiling only as recommended by the manufacturer.

23 Heat — The product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products

(including amplifiers) that produce heat.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your

equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion

- and, most importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries

Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

FCC INFORMATION (for US customers)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications

not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/

s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your

FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B”

digital devices.

Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential

environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio

frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful

to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur

in all installations. If this product is found to be the source of interference, which can be determined by turning the product

“OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type

of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe Ave.

Buena Park, CA90622.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

CAUTION-

VISIBLE AND INVISIBLE

LASER RADIATION WHEN OPEN. DO NOT

STARE INTO BEAM OR VIEW DIRECTLY

WITH OPTICAL INSTRUMENTS.

For Customer Use:

Read carefully the information located at the rear panel of this

unit and enter below the Serial No. Retain this information for

future reference.

Model No.

Serial No. __________________________

CAUTION

Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous

radiation exposure.

AVERTISSEMENT

L’utilisation de commandes et l’emploi de réglages ou de

méthodes autres que ceux décrits ci-dessous, peuvent entraîner

une exposition à un rayonnement dangereux.

DANGER

This unit emits visible laser radiation when open. Avoid direct

eye exposure to beam.

When this unit is plugged into a wall outlet, do not place your

eyes close to the opening of the disc tray and other openings or

look inside.

DANGER

Risque d’exposition au laser en cas d’ouverture. Eviter toute

exposition au faisceau.

Lorsque cet appareil est branché à la prise de courant, ne pas

approcher les yeux de l’ouverture du plateau changeur et des

autres ouvertures pour regarder à l’intérieur.

CAUTION: READ THIS BEFORE OPERATING THIS UNIT.

iii

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this unit in a well ventilated, cool, dry, clean place

— away from direct sunlight, heat sources, vibration,

dust, moisture, or cold. In a cabinet, allow about 2.5 cm

(1 inch) of free space all around this unit for adequate

ventilation.

3 Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes

from cold to hot, nor locate this unit in an environment

with high humidity (i.e., a room with a humidifier) to

prevent condensation inside this unit, which may cause an

electrical shock, fire, damage to this unit, and/or personal

injury.

5 Avoid installing this unit in a location where foreign

objects may fall onto this unit or where this unit may be

exposed to liquid dripping or splashing. On the top of this

unit, do not place:

– Other components, as they may cause damage and/

or discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall,

spilling the liquid and causing an electrical shock to

the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If the

temperature inside this unit rises, it may cause fire,

damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use excessive force on switches, knobs and/or

cords.

10 When disconnecting the power cord from the wall outlet,

grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Use only the voltage specified on this unit. Using this unit

with a higher voltage than specified is dangerous and may

cause fire, damage to this unit, and/or personal injury.

YAMAHA will not be held responsible for any damage

resulting from use of this unit with a voltage other than as

specified.

13 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any service

is needed. The cabinet should never be opened for any

reason.

14 When not planning to use this unit for long periods of

time (i.e., vacation), disconnect the AC power plug from

the wall outlet.

15 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that this unit

is faulty.

16 Before moving this unit, press STANDBY/ON to set the

unit in standby mode, then disconnect the AC power plug

from the wall outlet.

17 Install this unit near the AC outlet and where the AC

power plug can be reached easily.

18 The batteries shall not be exposed to excessive heat such

as sunshine, fire or the like.

LASER SAFETY

This unit employs a laser. Due to possible eye injury, only a

qualified service person should remove the cover or attempt

to service this device.

CAUTION: READ THIS BEFORE OPERATING THIS UNIT.

The unit is not disconnected from the AC power source as

long as it is connected to the wall outlet, even if this unit

itself is turned off. This state is called the standby mode. In

this state, this unit is designed to consume a very small

quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES-003.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

LASER

Type Semiconductor laser GaAlAs

Wave length 650 nm (DVD)

790 nm (VCD/CD)

Output Power 1.45 mW (DVD)

1.13 mW (VCD/CD)

Beam divergence 60 degrees

1 En

English

Playable disc formats.................................... 3

DVD region codes ............................................... 3

Patent information......................................... 4

Cleaning discs ............................................... 4

Supplied accessories.................................... 4

Front panel ..................................................... 5

Front panel display........................................ 6

Rear panel ...................................................... 7

Remote control .............................................. 8

General notes on connections ................... 10

Audio connections ...................................... 10

Connecting a stereo amplifier............................ 10

Connecting an AV receiver with 5.1ch/

digital input jacks .......................................... 10

Video connections....................................... 11

Connecting the power cable....................... 12

Step 1: Inserting batteries into the

remote control.......................................... 13

Using the remote control ................................... 13

Step 2: Turning on the power..................... 13

Step 3: Setting a TV type............................. 14

Step 4: Setting a language preference ...... 15

Setting the OSD (On-Screen Display)

language......................................................... 15

Setting the audio, subtitle and disc menu

languages ........................................................... 15

Basic operation............................................ 16

Pausing playback................................................ 16

Selecting a track/chapter .................................... 16

Searching backward/forward ............................. 17

Repeat playback........................................... 17

Repeating playback ............................................ 17

Repeating a section (except DVD-Audio/

MP3/WMA/JPEG) ......................................... 17

Random playback

(except DVD/DivX/SA-CD)........................ 17

Program playback (CD)

................................ 18

Disc menu operation (DVD/VCD/SVCD)..... 18

Using the DVD menu......................................... 18

Using the Video CD playback control (PBC)

menu (VCD/SVCD)....................................... 19

On-screen display (OSD) menu

(DVD/VCD/SVCD/SA-CD) ......................... 19

Using the OSD menu (DVD/VCD/SVCD/CD)

... 19

Displaying text information (SA-CD)................ 20

Zooming pictures (DVD-Video/VCD/SVCD/

DivX/JPEG)................................................ 20

Viewing angles (DVD-Video)....................... 21

Audio and Subtitle languages (DVD-Video)

... 21

Selecting an audio language............................... 21

Selecting a subtitle language.............................. 21

DivX external subtitle files .......................... 21

Changing pages (DVD-Audio)..................... 21

Group/File selection (DVD-Audio/DivX/

MP3/WMA/Kodak picture CD).................. 22

Selecting a group (DVD-Audio) ........................ 22

Selecting a file in a folder (DivX/MP3/WMA/

Kodak picture CD) ......................................... 22

Bonus group playback (DVD-Audio).......... 22

Changing the playback area and layer

(SA-CD)..................................................... 22

Multimedia file playback

(MP3/WMA/DivX/JPEG)

.............................. 23

Displaying the thumbnail screen (JPEG) ............23

Rotating pictures (JPEG).................................... 23

CONTENTS

INTRODUCTION 3

FUNCTIONAL OVERVIEW 5

CONNECTIONS 10

GETTING STARTED 13

DISC OPERATION 16

2 En

CONTENTS

Menu overview............................................. 24

Setup menu operation................................. 25

General setup menu .................................... 26

Selecting DVD-Audio mode.............................. 26

Selecting SA-CD mode...................................... 26

Setting the OSD language.................................. 26

Restricting playback with parental control ........ 26

Changing the parental password........................ 26

Setting the screen saver...................................... 27

Setting the auto power function ......................... 27

Setting the sleep timer........................................ 27

Resetting the system .......................................... 27

Displaying the DivX

VOD registration code

.... 27

Audio setup menu ....................................... 28

Setting the analog output ................................... 28

Setting the digital output.................................... 28

Setting the LPCM output ................................... 28

Setting the night listening mode ........................ 28

Speaker setup menu.................................... 29

Setting speaker sizes .......................................... 29

Setting speaker distances ................................... 29

Setting speaker levels......................................... 30

Setting the SA-CD configuration....................... 30

Setting the cut-off frequency (SA-CD only)...... 30

Video setup menu........................................ 31

Setting the TV display ....................................... 31

Setting the TV type ............................................ 31

Selecting the black level

(U.S.A. and Canada models only) ................. 31

Selecting the closed caption

(U.S.A. and Canada models only) ................. 32

Setting the still mode ......................................... 32

Selecting the progressive scan function............. 32

Switching the SCART video out

(U.K. and Europe models only)..................... 33

Adjusting picture settings .................................. 33

HDMI setup menu ........................................ 33

Setting the HDMI video..................................... 33

Selecting the wide screen format ....................... 34

Selecting the DVI output range ......................... 34

Setting the HDMI audio..................................... 35

DISC setup menu......................................... 35

Selecting the default audio/subtitle/

DVD menu language ..................................... 35

Selecting an angle mark display ........................ 35

Selecting the PBC (playback control) function

... 35

Setting the duration for a slide show ..................35

SETUP MENU 24 LANGUAGE CODE LIST 36

TROUBLESHOOTING 37

GLOSSARY 39

SPECIFICATIONS 42

3 En

INTRODUCTION

English

Thank you for purchasing this unit. This Owner’s Manual

explains the basic operation of this unit.

• Illustrations in this manual are based on the U.K. and

Europe models unless otherwise specified.

• Notes contain important information about safety and

operating instructions.

• y indicates a tip for your operation.

• This manual is printed prior to production. Design and

specifications are subject to change in part as a result of

improvements, etc. In case of differences between the

manual and the product, the product has priority.

• This unit is designed for use with the following discs:

DVD-Video, DVD-Audio, DVD-R, DVD-RW,

DVD+R, DVD+RW, DVD+R DL, Video CD,

Super Video CD, Super Audio CD (SA-CD), Audio CD,

CD-R and CD-RW.

• This unit can play:

– MP3, WMA (except copyright-protected WMA) and

picture (Kodak, JPEG) files recorded on CD-R(W)/

DVD-R(W)/DVD+R(W)

– JPEG/ISO 9660 format

– Maximum 14 character display

–DivX

disc on CD-R(W)/DVD-R(W)/DVD+R(W)

– Official DivX

Certified product

– Plays all versions of DivX

video (including

DivX

6) with standard playback of DivX

media

files

• CD-R(W), DVD-R(W) and DVD+R(W) cannot be played

unless finalized.

• Copyright-protected WMA files cannot be played with this

unit.

• Some discs cannot be played depending on the recording

conditions, such as the PC environment and application

software. The characteristics and condition of some discs;

materials, scratches, curvature, etc., may result in playback

failure.

• Be sure to use only CD-R(W), DVD-R(W) and DVD+R(W)

discs made by reliable manufacturers.

• Do not use any non-standard shaped discs (heart-shaped, etc.).

• Do not use discs with tape, seals, or paste on their surface.

Doing so may damage this unit.

• Do not use discs affixed with labels printed by a commercially

available label printer.

DVD region codes

This unit is designed to support the region management

system. Check the regional code number on the DVD disc

package. If the number does not match the region code of

this unit (see the table below or the back of this unit), this

unit may be unable to play the disc.

INTRODUCTION

Playable disc formats

Notes

Destination

Region code

of this unit

Playable discs

U.S.A.

Canada

U.K.

Europe

Australia

Asia

Korea

China

ALL

4 En

INTRODUCTION

–

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

“DTS” and “DTS Digital Surround” are registered

trademarks of Digital Theater Systems, Inc.

DivX, DivX Certified, and associated logos are

trademarks of DivX, Inc. and are used under license.

“DCDi” is a trademark of Faroudja, a division of Genesis

Microchip, Inc.

“HDMI”, the “HDMI” logo and “High Definition

Multimedia Interface” are trademarks or registered

trademark of HDMI Licensing LLC.

• When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center out. Do not wipe in

a circular motion.

• Do not use solvents such as benzine, thinner,

commercially available cleaners, or antistatic spray

intended for analog records.

Check your package to make sure it contains the following

items:

Patent information

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and other limited

viewing uses only unless otherwise authorized by

Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

Cleaning discs

Supplied accessories

HDMI

POWER

DIMMER

MULTI 2CH

RANDOM

AUDIO DIRECT STANDBY

GROUP PAGE

PROG

REPEAT

SUBTITLE

SETUP

AUDIO ZO OM

ANGLE

PAUSE

STOP

SKIP

PLAY

A B

SLOW SEARCH

ENTERCLEAR

ON SCREENTOP MENU

MENU RETURN

ENTER

Audio pin cable

Batteries (x2)

(AAA, R03, UM-4)

Remote

control

Power cable

Video pin cable

5 En

FUNCTIONAL OVERVIEW

English

1 Disc tray

Load a disc in the disc tray.

2 STANDBY/ON

Turns on this unit or sets it to the standby mode.

3 HDMI indicator

Lights up green when an HDMI component is

recognized by this unit and the HDMI mode is set to

on.

Lights up orange when no HDMI component is

recognized by this unit while the HDMI mode is set to

on.

4 AUDIO DIRECT indicator

Lights up when you select the AUDIO DIRECT mode

by pressing AUDIO DIRECT on the remote control.

5 Front panel display

Displays playback information or settings.

Opens or closes the disc tray.

7 b/w

Searches backward.*

Moves to the previous chapter or track.

8 f/a

Searches forward.*

Moves to the next chapter or track.

9 p/e

Starts or pauses playback.

0 s

Stops playback.

* Press and hold the button for about three seconds.

FUNCTIONAL OVERVIEW

Front panel

HDMI AUDIO DIRECT

STANDBY

6 7 8 092 4 5

6 En

FUNCTIONAL OVERVIEW

1 P.SCAN indicator

Lights up when the progressive scan function is

activated.

2 Playback mode indicators

Display the icon for the selected playback mode.

3 Decoder indicators

Display the icon for the selected internal decoder.

4 MULTI indicator

Lights up when playing the multi-channel audio

source.

5 D.MIX indicator (DVD-Audio only)

Lights up when playing the disc that allows down

mixing of the multi-channel audio source.

6 Disc indicators

Display the icon for the disc type.

7 Information display

Displays various information such as a title/chapter/

track number or elapsed playing time.

You can adjust the brightness of the front panel display using

DIMMER on the remote control.

Front panel display

MP3 JPEG

SVCD WMA

DVD AUDIO

SA-CD

DivX

P.SCAN TITLE GROUP CHP/ TRK MULTI D.MIX PROG. RANDOM ALL AD

252134

7 En

FUNCTIONAL OVERVIEW

English

1 AUDIO OUT (6ch discrete) jacks

Connect to the 6ch input jacks of your AV receiver.

2 DIGITAL (COAXIAL) jack

Connect to the coaxial input jack of your AV receiver.

3 REMOTE CONTROL (IN/OUT) connectors

Use in custom installations to transmit remote control

signals via cable connections.

4 REMOTE CONTROL (RS-232C) terminal

(U.S.A., Canada, Australia, U.K. and Europe

models only)

Use as an expansion terminal for commercial use.

Consult your dealer for details.

5 AV terminal

(U.K. and Europe models only)

Connect to SCART input terminal of your TV.

6 VIDEO OUT (VIDEO) jack

Connect to the composite video input jack of your AV

receiver.

7 MAINS

Connect the supplied power cable.

8 AUDIO OUT (MIXED 2CH) jacks

Connect to the audio input jacks of your AV receiver or

stereo system.

9 DIGITAL (OPTICAL) jack

Connect to the optical input jack of your AV receiver.

0 HDMI jack

Connect to the HDMI input jack of your HDMI

component.

q VIDEO OUT (S VIDEO) jack

Connect to the S-video input jack of your AV receiver.

w VIDEO OUT (COMPONENT) jacks

Connect to the component input jacks of your AV

receiver.

■ Remote control connectors and RS-232C terminal

The REMOTE CONTROL (IN/OUT) connectors and the REMOTE CONTROL (RS-232C) terminal are used in

custom installation. Do not connect any cables to these connectors during normal use.

(For U.S.A., Canada, Australia, U.K. and Europe models, keep the RS-232C switch set to OFF.)

Caution: Do not touch the inner pins of the jacks on the rear panel of this unit. Electrostatic discharge

may cause permanent damage to this unit.

Rear panel

MIXED 2CH

AUDIO OUT DIGITAL REMOTE CONTROL VIDEO OUT

FRONT

COAXIAL

OPTICAL

RS 232C

HDMI

S VIDEO

R / CR

PB / CB

VIDEO

MAINS

OUT

SUBWOOFER

CENTER

SURROUND

COMPONENT

OFF

89 0qw

25 6 7134

(U.K. and Europe models)

8 En

FUNCTIONAL OVERVIEW

1 DIMMER

Selects from three different levels of brightness for the

front panel display: medium, low and auto.

For auto setting, brightness is automatically set to low

only during playback.

2 HDMI

Switches the HDMI mode on or off.

3 GROUP

Selects the DVD-Audio group.

4 PAGE (+/–)

Selects the DVD-Audio still picture.

5 Numeric buttons (0-9)

Select numbered items in the currently displayed

menu.

6 CLEAR

Clear the mode or setting.

7 SETUP

Accesses or exits from the setup menu of this unit.

8 STOP (

)

Stops playback.

9 PAUSE (

)

Pauses playback temporarily.

Frame-by-frame playback.

0 SKIP (

l22 / 33l)

Moves to the previous/next chapter or track.

q TOP MENU

Displays the top-level disc menu.

w Cursors ( / / /

)

Selects an item in the currently displayed menu.

ENTER

Confirms the menu selection.

Remote control

HDMI

POWER

DIMMER

MULTI 2CH

RANDOM

AUDIO DIRECT STANDBY

GROUP PAGE

PROG

REPEAT

SUBTITLE

SETUP

AUDIO ZOOM

ANGLE

PAUSE

STOP

SKIP

PLAY

A B

SLOW SEARCH

ENTERCLEAR

ON SCREENTOP MENU

MENU RETURN

ENTER

;

9 En

FUNCTIONAL OVERVIEW

English

e MENU

Accesses the menu of a disc.

r SUBTITLE

Selects the subtitle language.

t AUDIO

Selects the audio language or format.

y POWER (

)

Turns on this unit.

u STANDBY ( )

Sets this unit to the standby mode.

i AUDIO DIRECT

Switches the video output on or off during playback.

This function is not available for HDMI output.

During playback in the AUDIO DIRECT mode, the

front panel display goes out.

o MULTI

/ 2CH

Selects a sound mode: Stereo or Multi-channel.

Changes the SA-CD playback area.

p PROG

Accesses the program setup menu to program disc

tracks or exit from its menu.

a RANDOM

Plays tracks in random order.

s REPEAT

Repeats the chapter, track, title, group or disc.

d A-B

Repeats a specific segment.

f ENTER

Confirms the menu selection.

g SLOW

/ SEARCH (22 / 33)

Searches backward or forward.

h PLAY (

)

Starts playback.

j ON SCREEN

Accesses or exit from the on-screen display (OSD)

menu of this unit.

k RETURN

Returns to the previous setup menu.

l ZOOM

Enlarges the video image.

; ANGLE

Selects the DVD camera angle.

Two ENTER buttons (w and f) act in the same way.

CONNECTIONS

10 En

Be sure to turn off this unit and unplug the power supply

cable, before you make or change connections.

• Depending on the component you want to connect, there

are various ways to make connections. Possible

connections are described below.

• Refer to the manuals supplied with your other

components as necessary to make the best connections.

• Do not connect this unit via your VCR. The video

quality could be distorted by the copy protection system.

• Do not connect the audio out jack of this unit to the

phono in jack of your audio system.

This unit has digital coaxial, digital optical, analog 6ch

discrete, analog mixed 2ch and HDMI output jacks.

Connection depends on the availability of audio jacks on

your component.

Connecting a stereo amplifier

Connect AUDIO OUT (MIXED 2CH) jacks of this unit to

the corresponding input jacks of your audio component

(such as a stereo amplifier) using the supplied audio pin

cable. You can connect a subwoofer to the

SUBWOOFER jack.

Connecting an AV receiver with 5.1ch/

digital input jacks

■ Analog connections

If you want to reproduce multi-channel Super Audio CD

(SA-CD) and DVD-Audio, connect AUDIO OUT (6ch

discrete) jacks of this unit to the corresponding input

jacks of your AV receiver using commercially available

audio pin cables.

CONNECTIONS

General notes on connections

Audio connections

REMOTE CONTROL

RS 232C

OUT ON

OFF

AUDIO OUT

SUBWOOFER

CENTER

SURROUND

DIGITAL

COAXIAL

OPTICAL

MIXED 2CH FRONT

HDMI

CD / DVD

This unit (U.K. and Europe models)

Stereo

amplifier

Left

speaker

Right

speaker

Subwoofer

Audio pin cable

(supplied)

MIXED 2CH

REMOTE CONTROL

RS 232C

OUT ON

OFF

AUDIO OUT

FRONT SUBWOOFER

CENTER

SURROUND

DIGITAL

COAXIAL

OPTICAL

HDMI

FRONT

SURROUND

CENTER

SUBWOOFER

This unit (U.K. and

Europe models)

AV receiver

Speakers

11 En

CONNECTIONS

English

■ Digital connections

If you want to use the Dolby Digital, DTS or MPEG

function on your AV receiver, connect DIGITAL

(OPTICAL) <A> or DIGITAL (COAXIAL) or

HDMI <C> jack of this unit to the corresponding input

jacks of your AV receiver using a commercially available

digital optical, digital coaxial or HDMI cable.

See “HDMI jack <A>” on page 12 about HDMI

connection.

• If you make a connection with <A> or , set [Digital Out]

to [All] (see “Setting the digital output” on page 28).

• If the audio format of the digital output does not match the

capabilities of your receiver, the receiver produces a distorted

sound or no sound at all. Make sure to select the appropriate

audio format from the menu screen on the disc.

Pressing AUDIO on the remote control once or more may

change not only the audio languages but also the audio format.

• SA-CD audio signals are not output from DIGITAL

(COAXIAL/OPTICAL) jacks.

• If you want to enjoy Dolby Digital, DTS, and MPEG formats,

you must connect this unit to an AV receiver that supports

these formats.

This unit has SCART, composite video, S-video,

component video and HDMI output jacks. If your AV

receiver has video output jacks, connect your receiver and

then your TV so that you can use one TV for several

different video sources (LD, VCR etc.) by simply

switching the input source selector on your receiver.

Use the one that corresponds to the input jacks on the

component to be connected.

Notes

MIXED 2CH

REMOTE CONTROL

RS 232C

OUT ON

OFF

AUDIO OUT

FRONT SUBWOOFER

CENTER

SURROUND

DIGITAL

COAXIAL

OPTICAL

HDMI

COAXIAL

OPTICAL

HDMI

<C><A>

This unit (U.K. and

Europe models)

AV receiver

Speakers

Video connections

NTROL VIDEO OUT

S VIDEO

B / CB

R / CR

VIDEO

COMPONENT

HDMI

RS 232C

S-VIDEO

VIDEO

HDMI

VIDEO

OUT

VIDEO

HDMI

OUT

HDMI

S VIDEO

OUT

COMPONENT

VIDEO OUT

COMPONENT

VIDEO IN

S VIDEO

PR/CR YPB/CB

COMPONENT VIDEO IN

This unit (U.K. and Europe models)

Video

pin cable

(supplied)

receiver

12 En

CONNECTIONS

■ HDMI jack <A>

HDMI (High-Definition Multimedia Interface) provides

high quality digital audio and video on a single

connection. Connect HDMI jack of this unit to the HDMI

input jack of your AV receiver, and then to that of your TV

using a commercially available HDMI cable.

If your receiver does not have HDMI output jack, you can

achieve a better video image by connecting HDMI jack of

this unit directly to the HDMI input jack of your TV.

• To output HDMI signals, set the HDMI mode to “on” by

pressing HDMI button on the remote control.

• You can use an HDMI-DVI converter cable in order to connect

this unit to HDCP-compatible DVI-D components. In this case,

you need to use another audio connection in addition to this

connection because no audio signals are output.

■ Composite video jack

Connect VIDEO OUT (VIDEO) jack of this unit to the

video input jack of your AV receiver, and then to that of

your TV using the supplied video pin cable.

■ S-video jack <C>

S-video connections achieve a clearer picture than

composite video connections by transmitting video signals

on separate wires for luminance (Y) and chrominance (C).

Connect VIDEO OUT (S VIDEO) jack of this unit to

S-video input jack of your AV receiver, and then to that of

your TV using a commercially available S-video cable.

■ Component video jacks <D>

Component video connections achieve higher fidelity

color reproduction than S-video connections by

transmitting video signals on separate wires for luminance

(Y: green) and chrominance (P

B: blue, PR: red). Connect

VIDEO OUT (COMPONENT) jacks of this unit to the

component input jacks of your AV receiver, and then to

those of your TV using a commercially available

component cable. Observe the color of each jack when

you make connections.

If your receiver does not have component output jacks,

you can achieve a better video image by connecting the

component output jacks of this unit directly to the

component input jacks of your TV.

■ SCART terminal <E>

(U.K. and Europe models only)

If your TV has only a terminal for video input, you can

connect the TV directly to this unit.

Connect AV terminal of this unit to SCART input terminal

of your TV using a commercially available SCART cable.

• Ensure that the “TV” indication on SCART cable is connected

to the TV set and “DVD” indication on SCART cable is

connected to this unit.

After all other connections are complete, plug the supplied

power cable into MAINS of this unit and then plug the

power cable to an AC outlet.

Notes

Note

Connecting the power cable

MAINS

To an AC

outlet

13 En

GETTING STARTED

English

1 Press the part and slide the battery

compartment cover off.

2 Insert the two supplied batteries (AAA, R03,

UM-4), following the indications (+/–) on the

inside of the compartment.

3 Slide the cover back until it snaps into place.

• Insert batteries correctly according to the polarity markings

(+/–). The batteries inserted in the opposite direction may leak.

• Replace the exhausted batteries immediately with new ones to

prevent a leakage.

• Remove the batteries from the compartment if the remote

control is not used for more than a month.

• If the batteries have leaked, dispose of them immediately.

Avoid touching the leaked material or letting it come into

contact with clothing, etc. Clean the battery compartment

thoroughly before installing new batteries.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as

these different types of batteries may have the same shape and

color.

• Dispose of the batteries correctly in accordance with your local

regulations.

Using the remote control

Use the remote control within 6 m (20 ft approx.) of this

unit and point it toward the remote control sensor.

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following types

of conditions:

– places of high humidity, such as near a bath

– places of high temperature, such as near a heater or stove

– places of extremely low temperature

– dusty places

1 Make sure that the power cable is connected to

an AC outlet.

2 Turn on your TV and AV receiver.

3 Select the appropriate input source of the AV

receiver connected to this unit. Refer to the

manual supplied with your AV receiver for

details.

4 Press STANDBY/ON on the front panel or

POWER (

) on the remote control to turn on

this unit.

➜ The front panel display lights up.

5 Set the TV to the correct Video IN channel (e.g.,

EXT1/2, AV1/2, AUDIO/VIDEO, etc. Refer to

the manual supplied with your TV for details).

➜ The default screen appears on the TV.

GETTING STARTED

Step 1: Inserting batteries into

the remote control

Notes

Step 2: Turning on the power

within 6m

(20 ft approx.)

14 En

GETTING STARTED

This unit is compatible with both NTSC and PAL video

formats. Select the color system that matches your TV.

• Before changing the current TV Standard setting, ensure that

your TV supports the selected TV type system.

• If you play an NTSC-formatted disc with the [PAL] setting or a

PAL-formatted disc with the [NTSC] setting, the video quality

may deteriorate.

1 Press SETUP.

➜ The setup menu appears.

2 Press / repeatedly to select [VIDEO],

and then press ENTER.

➜ [VIDEO] menu appears.

3 Press / repeatedly to highlight [TV

Type].

4 Press / to select one of the options below.

PAL

Select this if the connected TV is a PAL system TV. It will

change video signals of NTSC discs and output them in

PAL format.

NTSC

Select this if the connected TV is an NTSC system TV. It

will change video signals of PAL discs and output them in

NTSC format.

Step 3: Setting a TV type

Notes

1/2

SETUP

GENERAL

AUDIO

SPEAKER

VIDEO

HDMI

DISC

DVD-Audio mode

SA-CD mode

OSD Language

Parental Rating

Parental Password

Screen Saver

Auto Power Off

Sleep Timer

Select : Enter

Move :

Return

1/1

VIDEO

TV Display

TV Type

Black Level*1

Closed Caption*1

Still Mode

Progressive Scan

Scart Video Out*2

Picture Setting

Select : Enter

Move :

16:9

NTSC

Off

Field

Off

RGB

Return

*1: [Black Level] and [Closed Caption] are only for U.S.A. and

Canada models.

*2: [Scart Video Out] is only for U.K. and Europe models.

1/1

VIDEO

TV Display

TV Type

Black Level*1

Closed Caption*1

Still Mode

Progressive Scan

Scart Video Out*2

Picture Setting

Select : Enter

Move :

Return

16:9

NTSC

Off

Field

Off

RGB

15 En

GETTING STARTED

English

You can select your own preferred language settings. This

unit will automatically switch to your preferred language

for you whenever you load a disc. If the language selected

is not available on the disc, the default language of the disc

will be used instead. The OSD (On-Screen Display)

language in the system menu will remain once selected.

Setting the OSD (On-Screen Display)

language

1 Press SETUP.

➜ The setup menu appears.

2 Press / repeatedly to highlight

[GENERAL], and then press ENTER.

➜ [GENERAL] menu appears.

3 Press / repeatedly to highlight [OSD

Language].

4 Press / to select a language.

Setting the audio, subtitle and disc

menu languages

1 Press SETUP.

➜ The setup menu appears.

2 Press / repeatedly to highlight [DISC],

and then press ENTER.

➜ [DISC] menu appears.

3 Press / repeatedly to highlight [AUDIO

Language] or [Subtitle Language] or [DVD

Menu Language].

4 Press / to select a language.

■ To select the language not in the list:

1 Select [Others] under [AUDIO Language] or

[Subtitle Language] or [DVD Menu Language].

2 Press ENTER.

3 Use the numeric buttons (0-9) to enter the

4-digit language code (see “LANGUAGE CODE

LIST” on page 36).

4 Press ENTER.

Step 4: Setting a language

preference

1/2

GENERAL

DVD-Audio mode

SA-CD mode

OSD Language

Parental Rating

Parental Password

Screen Saver

Auto Power Off

Sleep Timer

Select : Enter

Move :

DVD-Audio

SA-CD

English

Level 8

Mode 1

Off

Return

1/1

DISC

AUDIO Language

Subtitle Language

DVD Menu Language

Angle Mark

PBC

Time Interval

Select : Enter

Move :

Return

English

Off

English

Off

3 sec

DISC OPERATION

16 En

• Unless otherwise specified, all operations described here are

carried out using the supplied remote control.

• If the inhibition icon ( or “Prohibit”) appears on the TV

screen when you press a button, the function for that button is

not available on the current disc or at the current time.

• Depending on the DVD or Video CD disc, some operations

may operate differently or be restricted.

• Do not push on the disc tray or put any objects other than discs

on the disc tray. Doing so may cause the disc unit to

malfunction.

1 Press on the front panel to open the disc tray.

2 Place a disc in the disc tray with the printed side

up.

3 Press again to close the disc tray.

➜ After recognizing the disc, this unit starts to play

back automatically.

• If you press PLAY (

) when the disc tray is

opened, the disc tray closes and playback starts

automatically.

• Depending on the disc, the disc reading time may

exceed 30 seconds due to the complexity of the

directory/file configuration.

4 To stop playback, press STOP (

➜ “RESUME” appears in the front panel display.

5 To resume playback, press PLAY (

➜ The disc is played back from the last stopping

point.

As long as you do not eject a disc, you can resume playback even

if you turn off this unit.

6 To cancel resume mode, press STOP (

)

twice.

• It may not be possible to play certain MP3/JPEG/DivX discs

due to the configuration and characteristics of the disc or the

recording conditions.

• When you play a down mix prohibited disc, “NO DOWN

MIX” lights in the front panel display.

Pausing playback

1 During playback, press PAUSE (

➜ Playback is paused and the sound is muted.

2 Press PAUSE (

) again to select the next

picture frame.

3 To resume normal playback, press PLAY (

Selecting a track/chapter

Press SKIP (l22 / 33l) or use the numeric

buttons (0-9) to select a track/chapter number.

• You can move to the top of the currently playing

track/chapter by pressing SKIP (l22 ) once, and

move to the previous track/chapter by pressing

SKIP (

l22 ) twice.

• During repeat playback of a track/chapter, press

SKIP (

l22 / 33l) to replay the same track/

chapter.

DISC OPERATION

Notes

Basic operation

MULTI 2CH

RANDOM

GROUP PAGE

PROG

REPEAT

SETUP

PAUSE

STOP

SKIP

PLAY

A B

SLOW SEARCH

ENTERCLEAR

ON SCREENTOP MENU

STOP ( )

PAUSE ( )

SKIP ( / )

SLOW/SEARCH

( / )

PLAY ( )

Numeric

buttons (0-9)

Notes

17 En

DISC OPERATION

English

Searching backward/forward

1 Press SLOW / SEARCH (22 / 33) .

• For slow search, press

PAUSE (

)

to pause playback

before pressing

SLOW

SEARCH (

22 / 33)

While searching, press

SLOW

SEARCH (

22 / 33)

repeatedly to select the desired speed.

3 To resume normal playback, press PLAY (

• For WMA and JPEG, the search function (backward, forward

and slow playback) is not available.

• For MP3, slow playback is not available.

• For VCD, SVCD and DivX, the slow backward function is not

available.

You can repeat single chapter/track, single title/group or

entire disc. Also, you can set two points (start and end

points) to repeat the specified section.

Repeating playback

Press REPEAT to select the repeat play mode.

➜ Each time you press the button, the display on the

TV screen changes as follows:

DVD-Video

DVD-Audio

CD, SA-CD, VCD, SVCD

MP3, WMA, JPEG, DivX

Chapter: repeats the current chapter

Title: repeats the current title

Track: repeats the current track

Group: repeats the current group

Folder: repeats the current folder

All*: repeats the entire disc

OFF: exits from repeat mode

*: This feature may not be available with some discs.

For VCD and SVCD, repeat playback is not available when the

PBC mode is selected.

Repeating a section

(except DVD-Audio/MP3/WMA/JPEG)

1 During playback, press A-B at the desired

starting point.

2 Press A-B again at the desired end point.

➜ The selected section repeats continuously.

3 To exit from the sequence, press A-B.

You can play tracks in random order.

1 During playback, press RANDOM.

➜ “RANDOM” appears in the front panel display

and all tracks are played in random order.

2 To resume normal playback, press RANDOM

again.

Notes

Repeat playback

REPEAT

SETUP

A B

SLOW SEARCH

ENTERCLEAR

A-B

REPEAT

Chapter

Title

OFF

Tra ck

Group

OFF

Track

All

OFF

Track

Folder

All

OFF

Note

Random playback

(except DVD/DivX/SA-CD)

RANDOM

PROG

REPEAT

RANDOM

18 En

DISC OPERATION

You can customize the playback order for tracks stored in

the disc. This unit supports a maximum of 20 programmed

tracks.

1 Press STOP (

) to stop playback if necessary.

2 Press PROG.

➜ The program setup menu appears on the TV

screen.

3 Use the numeric buttons (0-9) to enter a track

number you want to store as a program play.

4 Press to move the cursor to the next field.

5 Repeat step 3-4 until you store all desired tracks.

6 Use / / / to select [Play Program]

and then, press ENTER to start program

playback.

■ To clear the selected track number

Press CLEAR.

■ To clear the list

Use

/ / / to select [Clear All], and

then press ENTER.

Once you take out the disc from the disc tray or turn off this unit,

the stored program play content is cleared.

Many DVD and Video CD (version 2.0 only) discs include

original navigational menus called “DVD menus” and

“Video CD playback control menus”. These menus

provide a convenient way to operate the disc.

Using the DVD menu

1 Press MENU.

➜ The DVD menu appears on the TV screen.

• Depending on the disc, the DVD menu may appear

once you load the disc.

2 Use / / / or the numeric buttons

(0-9) to select a playback feature or item.

3 Press ENTER to start playback.

■ To exit from the menu

Press MENU.

Program playback (CD)

MULTI 2CH

RANDOM

GROUP PAGE

PROG

REPEAT

SETUP

PAU SE

STOP

SKIP

PLAY

A B

SLOW SEARCH

ENTERCLEAR

ON SCREENTOP MENU

MENU RETURN

ENTER

RETURN

PROG

CLEAR

/ / /

ENTER

STOP ( )

Numeric

buttons (0-9)

Note

Disc menu operation

(DVD/VCD/SVCD)

MULTI 2CH

RANDOM

GROUP PAGE

PROG

REPEAT

SETUP

PAUSE

STOP

SKIP

PLAY

A B

SLOW SEARCH

ENTERCLEAR

ON SCREENTOP MENU

MENU RETURN

ENTER

SKIP ( / )

ENTER

RETURN

/ / /

ENTER

Numeric

buttons (0-9)

19 En

DISC OPERATION

English

Using the Video CD playback control

(PBC) menu (VCD/SVCD)

1 Press MENU to turn on the PBC function.

➜ The disc menu appears on the TV screen.

• Depending on the disc, the disc menu may appear

once you load the disc.

2 Use SKIP (l22 / 33l) or the numeric buttons

(0-9) to select a playback option.

3 During playback, press RETURN to return to

the menu screen.

■ To skip the index menu and play back a

disc directly from the beginning

Press MENU to turn off the PBC function.

You can also use the setup menu to turn on or off the playback

control (PBC) function (see “Selecting the PBC (playback

control) function” on page 35).

The OSD menu shows disc playback information (e.g., the

title or chapter number, elapsed playing time or audio/

subtitle language). A number of operations are possible

without interrupting disc playback.

Using the OSD menu

(DVD/VCD/SVCD/CD)

During playback, press ON SCREEN.

➜ A list of available disc information appears on the

TV screen.

DVD-Video

DVD-Audio

VCD/SVCD/CD

1: Current title or group number/Total number of titles or groups

Current chapter or track number/Total number of chapters or tracks

3: Elapsed time

4: Time remaining

5: Elapsed time (You can input numbers for time search.)

6: Audio information

7: Current angle number/Total number of available angles

Current subtitle number/Total number of available subtitle languages

9: Data transmission speeds

Current audio number/Total number of available audio languages

q: Current page number/Total number of pages

w: Time (You can select a category of time.)

e: Category of time being displayed on w

On-screen display (OSD) menu

(DVD/VCD/SVCD/SA-CD)

MULTI 2CH

RANDOM

GROUP PAGE

PROG

REPEAT

SETUP

PAUSE

STOP

SKIP

PLAY

A B

SLOW SEARCH

ENTERCLEAR

ON SCREENTOP MENU

MENU RETURN

ENTER

ON SCREEN

/ / /

Numeric

buttons (0-9)

DVD VIDEO

00 : 00 : 10

Chapter 1 / 7 Time 00 : 00 : 10

02 : 15 : 30

MPEG 5.1 Ch

Audio 1 / 1

Title 1 / 1

Subtitle 1 / 1

Bitrate 3.072 Mbps

Angle 1 / 1

3 4

7 6

DVD AUDIO 00 : 00 : 10

Group 1 / 1

Audio 1 / 1

Subtitle 1 / 1 Angle 1 / 1 Page 1 / 1

PPCM 5.1 Ch 96 k / 24 bit

Track 1 / 8

Time 00 : 00 : 10

02 : 15 : 30

8 76 q0

32145

VCD

Track 1 / 7

00 : 00 : 10

Time Track Elapsed

20 En

DISC OPERATION

■ To select a title (DVD-Video)/group

(DVD-Audio)

1 Press / / / repeatedly to highlight

1, and then enter a title/group number using the

numeric buttons (0-9).

2 Press ENTER.

■ To select a chapter (DVD-Video)/track

(VCD/SVCD/DVD-Audio)

1 Press / / / repeatedly to highlight

2, and then enter a chapter or track number

using the numeric buttons (0-9).

2 Press ENTER.

■ To search for a time

1 Press / / / repeatedly to highlight

5, and then enter hours, minutes and seconds

from left to right using the numeric buttons

(0-9).

2 Press ENTER.

When searching for a time, if you enter a time outside the total

time for the group/track currently being played back, the

inhibition icon ( ) is displayed.

■ To select an angle/subtitle/audio

1 Press / / / repeatedly to highlight

7, 8 or 0, and then enter a audio, subtitle or

angle number using the numeric buttons

(0-9).

2 Press ENTER.

You cannot change the [Angle]/[Subtitle]/[Audio] setting if the

function is not available on the disc you are playing.

■ To select a page (DVD-Audio)

1 Press / / / repeatedly to highlight

q, and then enter a page number using the

numeric buttons (0-9).

2 Press ENTER.

■ To select a category of time

(VCD/SVCD/CD)

Press / / / repeatedly to highlight

w, and then press ENTER to toggle between the

category of time

■ To exit from the OSD menu

Press ON SCREEN.

Displaying text information (SA-CD)

Some SA-CD discs contain text information (e.g., track

name, album name, artist name etc.). If SA-CD text is

available on the disc, the track name is automatically

displayed on the TV screen once you load the disc.

■ To display the album/artist name

During playback, press ON SCREEN.

You can enlarge the picture on the TV screen and to pan

through the enlarged picture.

1 During playback, press ZOOM repeatedly to

display the picture at different scales.

2 To pan through the enlarged picture, press

/ / / to pan through the enlarged

picture.

3 Press ZOOM repeatedly to return to the original

size.

Note

Zooming pictures

(DVD-Video/VCD/SVCD/DivX/

JPEG)

SUBTITLE AUDIO ZOOM

ANGLE

ON SCREENTOP MENU

MENU RETURN

ENTER

ZOOM

/ / /

21 En

DISC OPERATION

English

If the disc contains sequences recorded from different

camera angles, you can view the picture from a number of

different angles.

Viewing angles available for each disc may vary. Refer to the

operating instructions in the DVD menu or on its jacket.

Press ANGLE repeatedly to select the desired

angle.

If the disc contains multi-language options, you can select

audio/subtitle languages.

Languages available for each disc may vary. Refer to the

operating instructions in the disc menu or on its jacket.

You can set default audio/subtitle languages in the setup menu

(see “Setting the audio, subtitle and disc menu languages” on

page 15).

Selecting an audio language

Press AUDIO repeatedly to select an audio

language.

Selecting a subtitle language

Press SUBTITLE repeatedly to select a subtitle

language.

The font sets listed below are available for DivX external

subtitle files. To watch DivX discs with the desired font

set, set the default subtitle language setting in the setup

menu to the desired language (see “Setting the audio,

subtitle and disc menu languages” on page 15).

This unit supports the following languages:

Albanian, Breton, Bulgarian, Byelorussian, Catalan,

Croatian, Czech, Danish, Dutch, English, Faroese,

Finnish, French, German, Hungarian, Icelandic, Irish,

Italian, Kurdish (Latin), Macedonian, Greek, Hebrew,

Moldavian, Norwegian, Polish, Portuguese, Romanian,

Russian, Serbian, Slovak, Slovenian, Spanish, Swedish,

Turkish, Ukrainian

• Some discs cannot be played depending on disc characteristics

or recording conditions.

• Some external subtitle files may be displayed incorrectly or not

at all.

• For external subtitle files, the following filename extensions of

subtitle format are supported (note that these files are not

shown within the disc navigation menu):

.srt, .sub, .ssa, .smi, .ass, .txt, .psb, .sami

• The filename of the movie file has to be repeated at the

beginning of the filename for the external subtitle file.

• For a movie file, only one external subtitle file can be loaded.

Many DVD-Audio discs include slide show and page turn

capabilities. You can display information pages for photo

galleries, artist biographies, lyrics, etc. if the function is

available for the disc.

Press PAGE (+/–) repeatedly to move to the

next/previous page.

Viewing angles (DVD-Video)

Note

Audio and Subtitle languages

(DVD-Video)

Note

SUBTITLE AUDIO ZOOM

ANGLE

SUBTITLE AUDIO ZOOM

ANGLE

SUBTITLE

AUDIO

DivX external subtitle files

Notes

Changing pages (DVD-Audio)

HDMIDIMMER

MULTI 2CH

AUDIO DIRECT STANDBY

GROUP PAGE

PROG

PAGE (+/ )

22 En

DISC OPERATION

You can select a track in a specific group for DVD-Audio

discs and a track/file in a folder for data disc.

Selecting a group (DVD-Audio)

1 Press GROUP.

➜ A group icon appears on the TV screen.

2 Use / or the numeric buttons (0-9)

to select a group number.

3 Press ENTER.

Selecting a file in a folder

(DivX/MP3/WMA/Kodak picture CD)

1 Press / to select a folder, and then press

ENTER to open the folder.

2 Press / to select a file, and then press

ENTER.

➜ Playback starts from the selected file.

• If you use the numeric buttons (0-9) to select a

file, playback starts from the selected file

automatically.

Some DVD-Audio discs contain bonus groups that require

a four-digit password to gain access. In this case, refer to

the disc jacket and other packaging for information.

1 Press GROUP.

➜ A group icon appears on the TV screen.

2 Use / or the numeric buttons (0-9)

to select a bonus group number, and then press

ENTER.

3 Enter a four-digit password using the numeric

buttons (0-9), and then press ENTER.

4 Press / to select a track, and then press

ENTER.

There are three types of SA-CD discs: single-layer, dual-

layer and hybrid. Each type may contain up to two areas of

recorded information: a High Quality Stereo area and a

High Quality Multi-channel area. You can switch between

the SA-CD multi-channel and SA-CD stereo areas.

You cannot change the analog output setting during SA-CD

playback (see “Setting the analog output” on page 28).

Group/File selection (DVD-Audio/

DivX/MP3/WMA/Kodak picture CD)

MULTI 2CH

RANDOM

GROUP PAGE

PROG

REPEAT

SETUP

PAUSE

STOP

SKIP

PLAY

A B

SLOW SEARCH

ENTERCLEAR

ON SCREENTOP MENU

MENU RETURN

ENTER

GROUP

ENTER

Numeric

buttons (0-9)

DVD AUDIO

01 / 08

Group

Select : Enter

Move :

Bonus group playback

(DVD-Audio)

Changing the playback area and

layer (SA-CD)

Note

MULTI 2CH

RANDOM

GROUP PAGE

PROG

REPEAT

SETUP

PAUSE

STOP

SKIP

PLAY

A B

SLOW SEARCH

ENTERCLEAR

ON SCREENTOP MENU

MENU RETURN

ENTER

ON SCREEN

ENTER

GROUP

Numeric

buttons (0-9)

DVD AUDIO

01 / 08

Group

Select : Enter

Move :

23 En

DISC OPERATION

English

1 Press STOP (

) to stop playback.

2 Press MULTI / 2CH.

➜ MULTI indicator lights up when the multi-channel

area is selected.

You can play MP3, WMA, DivX and JPEG files on a

personally recorded CD-R/RW disc or commercial CD.

Some files cannot be played correctly depending on disc

characteristics or recording conditions.

You can set the duration for each image of a slide show (see

“Setting the duration for a slide show” on page 35).

1 Load a disc in the disc tray.

➜ Playback starts automatically.

➜ For MP3 and WMA, the data disc menu appears

on the TV screen.

➜ For DivX and JPEG, press STOP (

) during

playback to display the data disc menu.

2 Press / to select a folder, and then press

ENTER to open the folder.

• To move to the upper folder, select the folder icon

with two dots when disc playback is stopped.

3 Press / to select a file, and then press

ENTER.

➜ Playback starts from the selected file.

• If you use the numeric buttons (0-9) to select a

file, playback starts from the selected file

automatically.

Displaying the thumbnail screen (JPEG)

1 Press MENU during playback.

➜ The thumbnail pictures appear on the TV screen.

2 Press SKIP (l22 / 33l) to display the other

pictures on the previous/next page.

3 Press / / / to highlight one of the

pictures, and then press ENTER to start

playback.

4 Press STOP (

) to return to the data disc

menu.

Rotating pictures (JPEG)

During playback, press / / / to

rotate the picture on the TV screen.

: rotates the picture counter-clockwise by 90

degrees

: rotates the picture clockwise by 90 degrees

, : rotates the picture by 180 degrees

Multimedia file playback

(MP3/WMA/DivX/JPEG)

Note

MULTI 2CH

RANDOM

GROUP PAGE

PROG

REPEAT

SETUP

PAUSE

STOP PLAY

A B

SLOW SEARCH

ENTERCLEAR

MULTI / 2CH

STOP ( )

RANDOM

PROG

REPEAT

SETUP

PAUSE

STOP

SKIP

PLAY

A B

SLOW SEARCH

ENTERCLEAR

ON SCREENTOP MENU

MENU RETURN

ENTER

STOP ( )

/ / /

ENTER

SKIP ( / )

Numeric

buttons (0-9)

JPG

JPGJPG

JPG

JPGJPG

JPG

JPGJPG

JPG

JPGJPG

JPG

JPGJPG

ROOTROOT

00 : 00 : 1000 : 00 : 10

SCRNESCRNE

JPEGJPEG

A_0510 1A_0510 1

B_0618 2B_0618 2

B_0630 3B_0630 3

C_0731 4C_0731 4

C_0729 5C_0729 5

. . 0. . 0

Move : Select : EnterMove : Select : Enter

Media PlayerMedia Player TimeTime

SETUP MENU

24 En

SETUP MENU

Menu overview

Main Menu Menu item Setting Item/Submenu Setting item/Parameter

GENERAL DVD-Audio mode DVD-Audio, DVD-Video

SA-CD mode SA-CD, CD

OSD Language English, Français, Español,

Parental Rating _ _ _ _ (Enter your password) Level 1 to Level 8

Parental Password _ _ _ _ (Enter your password) New Password, Confirm Password

Screen Saver On, Off

Auto Power Off Mode 1, Mode 2, Off

Sleep Timer Off, 30 min, 60 min, 90 min,120 min,150 min

Factory Default _ _ _ _ (Enter your password) Yes, No

DivX Registration (DivX registration code is displayed) Enter

AUDIO Analog Output Stereo, Multi-Channel

Digital Out All, PCM, Off

LPCM Output 48KHz, 96KHz

Night Listening Mode On, Off

SPEAKER Size Front L/R Large, Small

Center, Surround L/R Large, Small, Off

Subwoofer, Initialize On, Off

Distance Unit Feet, Meter

Front L/R, Center, Surround L/R 1ft to 40ft (0.3m to 12.0m)

Initialize On, Off

Level Front L, Center, Front R, Surround L, Surround R,

Subwoofer

0dB to –12dB

Test Tone Off, Manual, Auto

Initialize On, Off

SA-CD Config Config 1, Config 2, Config 3

CUT-OFF Frequency 60, 80, 100, 120

VIDEO TV Display 16:9, 4:3 Pan Scan, 4:3 Letter Box

TV Type NTSC, PAL

Black Level (U.S.A. and

Canada models only)

On, Off

Closed Caption (U.S.A.

and Canada models only)

On, Off

Still Mode Frame, Field

Progressive Scan On, Off

Scart Video Out (U.K. and

Europe models only)

CVBS, RGB

Picture Setting Brightness 0 to +6

Contrast, Hue, Sharpness Mid, Sharpness High –6 to +6

DNR 0 to +6

Gamma, Chroma level –6 to +6

Chroma delay –2 to +2

True Life 0 to +6

HDMI HDMI Video 480P/576P, 720P, 1080I, 1080P, Auto

Wide Screen Format NL Stretch, Pillar Box, Off

DVI Output Range Standard, Enhanced

HDMI Audio Auto, PCM, Off

DISC AUDIO Language

Off ([Subtitle Language] only), English, French,

Spanish, Japanese, German, Italian, Russian,

Others

Subtitle Language

DVD Menu Language

Angle Mark On, Off

PBC On, Off

Time Interval 2 sec to 10 sec

25 En

SETUP MENU

English

Setup is carried out on the TV screen, enabling you to

customize this unit to suit your own particular

requirements. Follow the procedures below to start the

setup menu operations.

• Press RETURN to display the previous menu.

• Press SETUP to exit from the setup menu.

• Refer to the following pages for details of the menu that

requires a particular operation.

1 Press SETUP.

➜ Main menus and menu items appear on your TV.

2 Press / to select the desired main menu,

and then press ENTER.

➜ Menu items and setting items appear.

3 Press / to highlight the desired menu item.

➜ If the selected menu item has only setting items,

left and right arrows appear on both sides of the

setting item.

➜ If the selected menu item has submenus, only a

right arrow is displayed on the side of the setting

item.

In this case, press , and then repeat step 3.

4 Press / to toggle the setting items or to

adjust the parameter.

Setup menu operation

REPEAT

SUBTITLE

SETUP

AUDIO ZOOM

ANGLE

PAUSE

STOP

SKIP

PLAY

A B

SLOW SEARCH

ENTERCLEAR

ON SCREENTOP MENU

MENU RETURN

ENTER

SETUP

RETURN

/ / /

ENTER

1/2

GENERAL

AUDIO

SPEAKER

VIDEO

HDMI

DISC

DVD-Audio mode

SA-CD mode

OSD Language

Parental Rating

Parental Password

Screen Saver

Auto Power Off

Sleep Timer

Select : Enter

Move :

SETUP

Return

1/1

SPEAKER

Select : Enter

Move :

Size

Distance

Level

SA-CD Config

CUT-OFF Frequency

Config 1

100

Return

1/1

SPEAKER

Size

Distance

Level

SA-CD Config

CUT-OFF Frequency

Select : Enter

Move :

Config 1

100

Return

1/1

SPEAKER

Select : Enter

Move :

Size

Distance

Level

SA-CD Config

CUT-OFF Frequency

Config 1

100

Return

26 En

SETUP MENU

Selecting DVD-Audio mode

Some DVD-Audio discs contain the DVD-Video content

in addition to the DVD-Audio content. You can select

DVD-Audio or DVD-Video mode.

• Select [DVD-Audio mode] in [GENERAL] menu.

DVD-Audio

Select this to play back both DVD-Audio and DVD-Video

contents. Only the DVD-Audio content may be played

back depending on the disc.

DVD-Video

Select this to play back only the DVD-Video content.

• This setting is only available when no disc is loaded in the disc

tray.

• Selected mode becomes effective after you close the setup

menu.

• When a DVD-Audio disc is played back, the DVD AUDIO

indicator lights up.

• When you select [DVD-Video], the DVD AUDIO indicator

goes out.

Selecting SA-CD mode

Some SA-CD discs contain both SA-CD layer and the

standard CD layer. You can select SA-CD or CD mode.

• Select [SA-CD mode] in [GENERAL] menu.

SA-CD

Select this to play back SA-CD layer.

Select this to play back CD layer.

• This setting is only available when no disc is loaded in the disc

tray.

• Selected mode becomes effective after you close the setup

menu.

Setting the OSD language

This menu contains various options for the on-screen

display (OSD) language. For details, see “Setting the OSD

(On-Screen Display) language” on page 15.

Restricting playback with parental

control

Some DVD discs have a parental level assigned to the

complete disc or to certain scenes on the disc. This feature

lets you set a playback limitation level.

The rating levels are from 1 to 8 and are country

dependent. You can prohibit playback of certain discs that

are not suitable for your children or play certain discs in

alternative scenes.

1 Select [Parental Rating] in [GENERAL] menu.

2 Enter your four-digit password using the

numeric buttons (0-9). (For details about the

password, see “Changing the parental password”

below.)

➜ If the password is correct, [Parental Rating] is

enabled to select.

3 Press / to select the rating level.

• To disable parental controls and have all discs play,

select [Level 8].

• VCD, SVCD, CD and SA-CD have no level indication, so the

parental control function has no effect with these types of

discs.

• Some DVD discs are not encoded with a rating though the

movie rating may be printed on the disc cover. The rating level

feature does not work for such discs.

Changing the parental password

You can change the password for parental control. Enter

your four-digit password when prompted on the screen.

The default password is “2580”.

1 Select [Parental Password] in [GENERAL]

menu.

2 Enter your old four-digit password using the

numeric buttons (0-9).

• When doing this for the first time, enter “2580”.

➜ If the password is correct, the submenu appears

3 Enter the new four-digit password using the

numeric buttons (0-9).

➜ [Confirm Password] is highlighted.

4 Enter the new four-digit password again.

➜ The previous menu screen appears and the new

four-digit password is now valid.

General setup menu

Notes

1/2

GENERAL

AUDIO

SPEAKER

VIDEO

HDMI

DISC

DVD-Audio mode

SA-CD mode

OSD Language

Parental Rating

Parental Password

Screen Saver

Auto Power Off

Sleep Timer

Select : Enter

Move :

SETUP

Return

Notes

27 En

SETUP MENU

English

Setting the screen saver

You can turn on or off the screen saver.

• Select [Screen Saver] in [GENERAL] menu.

Select this to turn on the screen saver when disc playback

is stopped for more than 15 minutes.

Off

Select this to disable the screen saver function.

Setting the auto power function

You can set the auto standby mode.

• Select [Auto Power Off] in [GENERAL] menu.

Mode 1

Select this to set this unit to the standby mode

automatically when disc playback is stopped for more

than 30 minutes or disc playback is continued for more

than six hours without operation.

Mode 2

Select this to set this unit to the standby mode

automatically when disc playback is stopped for more

than 30 minutes.

Off

Select this to disable the auto power off function.

Setting the sleep timer

You can set this unit to the standby mode automatically

after a certain elapsed period.

• Select [Sleep Timer] in [GENERAL] menu.

30 min, 60 min, 90 min, 120 min, 150 min

Select one to set the sleep timer function.

Off

Select this to cancel the sleep timer function.

Resetting the system

You can reset all options and your personal settings to the

initial factory settings, except [Parental Rating] and

[Parental Password].

1 Select [Factory Default] in [GENERAL] menu.

2 Enter your four-digit password using the

numeric buttons (0-9). (For details about the

password, see “Changing the parental password”

on page 26.)

➜ The confirmation screen appears.

3 Press / to select [Yes] to reset the system,

and then press ENTER.

➜ All settings are reset to the initial factory settings.

Displaying the DivX

VOD registration

code

Yamaha provides you with the DivX

VOD (Video On

Demand) registration code that allows you to rent and

purchase videos using the DivX

VOD service.

For more information, visit at www.divx.com/vod.

Select [DivX Registration] in [GENERAL] menu.

2 Press .

➜ The registration code appears.

3 Press ENTER to return to the previous menu.

To purchase or rent the videos from DivX

VOD service at

www.divx.com/vod, use the registration code and download the

video onto a CD-R for playback on this unit.

• All videos downloaded from DivX

VOD can only be played

back on this unit.

• The time search function is not available during DivX movie

playback.

Notes

2/2

. . . .. . . .

GENERAL

Factory Default

DivX Regis

Select : Enter

Move :

Factory Default

Press [Yes] to confirm

Yes

Return

28 En

SETUP MENU

Setting the analog output

Set the analog output to match the playback capability of

this unit.

• Select [Analog Output] in [AUDIO] menu.

Stereo

Select this to change channel output to stereo, which only

delivers sound from the two front speakers.

Multi-Channel

Select this when using a multi-channel audio/(video)

receiver with 6 channel inputs. In this mode, this unit

performs DTS decoding or Dolby Digital 5.1-channel

decoding when applicable.

Setting the digital output

Set the digital output according to your optional audio

component connections.

• Select [Digital Out] in [AUDIO] menu.

All

Select this if you have connected the digital audio output

jack to a multi-channel decoder/receiver.

PCM

Select this only if your receiver is not capable of decoding

multi-channel audio signals.

Off

Select this to turn off the digital output.

Setting the LPCM output

Set the LPCM output if you have connected this unit to a

PCM-compatible receiver via a digital terminal, such as

the coaxial or optical terminals.

Discs are recorded at a certain sampling rate. The higher

the sampling rate, the better the sound quality.

• Select [LPCM Output] in [AUDIO] menu.

48KHz

Select this to play back discs recorded at the sampling rate

of 48 kHz. All 96 kHz PCM data streams (if available) are

converted to the sampling rate of 48 kHz.

96KHz

Select this to play back discs recorded at the sampling rate

of 96 kHz. If the 96 kHz disc is copy protected, the digital

output is automatically converted to a sampling rate of 48

kHz.

Setting the night listening mode

In this mode, high volume output is softened and low

volume output is brought upward to an audible level. It is

useful when you watch your favorite action movie without

disturbing others at night.

• Select [Night Listening Mode] in [AUDIO]

menu.

Select this to level out the volume. This feature is only

available for movies with Dolby Digital mode.

Off

Select this when you want to enjoy the full dynamic range

of surround sound.

Audio setup menu

1/1

SETUP

GENERAL

AUDIO

SPEAKER

VIDEO

HDMI

DISC

Analog Output

Digital Out

LPCM Output

Night Listening Mode

Select : Enter

Move :

Return

29 En

SETUP MENU

English

Setting speaker sizes

You can set the sizes for individual speakers.

• Select [Size] in [SPEAKER] menu.

Front L/R

Set the sizes for front L/R speakers.

Large

Select this if the connected speakers are large.

Small

Select this if the connected speakers are small.

Center, Surround L/R

Set the sizes for center/surround L/R speakers.

Large

Select this if the connected speakers are large.

Small

Select this if the connected speakers are small.

Off

Select this if no center/surround L/R speakers are

connected.

Subwoofer

Select on or off for the subwoofer.

Select this if a subwoofer is connected.

Off

Select this if no subwoofer is connected.

• These settings are not available for SA-CD discs. See “Setting

the SA-CD configuration” on page 30 for the SA-CD setting.

• [Center], [Surround L/R] and [Subwoofer] settings are not

available when the [Analog Output] setting is set to [Stereo]

(see “Setting the analog output” on page 28).

Initialize

You can reset [Size] settings to the initial factory settings.

1 Select [Initialize] under [Size] in [SPEAKER]

menu.

2 Press .

➜ The confirmation screen appears.

3 Select [Yes] to reset the setting, and then press

ENTER.

➜ [Size] settings are reset to the initial factory

settings.

Setting speaker distances

You can set the distances for individual speakers.

Placing all speakers except for the subwoofer at equal

distances from the listener is the most ideal way of the

speaker positioning in 5.1 channel system.

• Select [Distance] in [SPEAKER] menu.

Unit

You can select the display unit of measurement.

Feet

Select this to input speaker distances in feet.

Meter

Select this to input speaker distances in meters.

Front L/R

Set the distance from your listening position to the front

speakers. We recommend to place the front left speaker

and right speaker at the same distance from the listening

position.

Control range: 1ft to 40ft (0.3m to 12.0m)

Control step: 1ft (0.3m)

Center

Set the distance from your listening position to the center

speaker.

Control range: 1ft to 40ft (0.3m to 12.0m)

Control step: 1ft (0.3m)

For the [Center] setting, you cannot specify the distance beyond

the [Front L/R] setting or below the [Front L/R] setting minus 5ft

(1.5m).

Speaker setup menu

Notes

1/1

SETUP

GENERAL

AUDIO

SPEAKER

VIDEO

HDMI

DISC

Size

Distance

Level

SA-CD Config

CUT-OFF Frequency

Select : Enter

Move :

Return

Note

30 En

SETUP MENU

Surround L/R

Set the distance from your listening position to the

surround speakers. We recommend to place the surround

left speaker and right speaker at the same distance from

the listening position.

Control range: 1ft to 40ft (0.3m to 12.0m)

Control step: 1ft (0.3m)

For the [Surround L/R] setting, you cannot specify the distance

beyond the [Front L/R] setting or below the [Front L/R] setting

minus 15ft (4.5m).

Initialize

You can reset [Distance] settings to the initial factory

settings.

1 Select [Initialize] under [Distance] in

[SPEAKER] menu.

2 Press .

➜ The confirmation screen appears.

3 Select [Yes] to reset the setting, and then press

ENTER.

➜ [Distance] settings are reset to the initial factory

settings.

Setting speaker levels

You can set the volume levels for individual speakers.

• Select [Level] in [SPEAKER] menu.

Front L, Center, Front R, Surround L, Surround R,

Subwoofer

Set the volume levels for front L/R speakers, center

speaker, surround L/R speakers or subwoofer.

Control range: 0dB to –12dB

Control step: 1dB

Test Tone

A test tone can be output to help you judge the volume

level of each speaker.

1 Select [Test Tone] under [Level] in [SPEAKER]

menu.

2 Press / to select [Off], [Manual] or [Auto].

Off

Select this to output no test tone.

Manual

Select this to output the test tone manually.

Auto

Select this to output the test tone from each speaker

automatically.

3 For [Auto], press ENTER to output the test tone.

For [Manual], press

/ to select each

speaker, and then press

ENTER to output the test

tone.

Initialize

You can reset [Level] settings to the initial factory settings.

1 Select [Initialize] under [Level] in [SPEAKER]

menu.

2 Press .

➜ The confirmation screen appears.

3 Select [Yes] to reset the setting, and then press

ENTER.

➜ [Level] settings are reset to the initial factory

settings.

Setting the SA-CD configuration

You can select speaker sizes and on/off statuses for

SA-CD discs.

• Select [SA-CD Config] in [SPEAKER] menu.

Config 1, Config 2, Config 3

Select speaker sizes and on/off statuses from the following

three settings.

Setting the cut-off frequency

(SA-CD only)

You can select a cut-off (cross-over) frequency for all low-

frequency signals. All frequencies below the selected

frequency are sent to the subwoofer.

• Select [CUT-OFF Frequency] in [SPEAKER]

menu.

60, 80, 100, 120 (Hz)

Select the cut-off frequency.

Note

Speaker

Size or on/off

Config 1 Config 2 Config 3

Front L/R Large Small Large

Center Large Small Small

Surround L/R Large Small Small

Subwoofer On On Off

31 En

SETUP MENU

English

Setting the TV display

Set the aspect ratio of this unit to match your TV. The

format you select must be available on the disc.

• Select [TV Display] in [VIDEO] menu.

4:3 Pan Scan

Select this if the aspect ratio of your TV is 4:3. In this

setting, both sides of the picture to be trimmed or

formatted to fit your TV screen.

4:3 Letter Box

Select this if the aspect ratio of your TV is 4:3. In this

setting, a wide picture with black bands on the upper and

lower portions of the TV screen are displayed.

16:9

Select this if you have a widescreen TV.

■ The relationship between the setting of this

unit and the TV display

When the aspect ratio of your TV is 16:9 (widescreen):

When the aspect ratio of your TV is 4:3:

*1: The side of the picture may be stretched depending on the

TV. In this case, check the screen size and aspect ratio of

your TV.

*2: If the disc is not assigned to play back with panscan, it is

played with letterbox.

Setting the TV type

This menu contains the options for selecting the color

system that matches your TV. For details, see “Step 3:

Setting a TV type” on page 14.

Selecting the black level

(U.S.A. and Canada models only)

If you set the [TV Type] to [NTSC] (see “Step 3: Setting a

TV type” on page 14), set this setting shift to [On] to

improve the color contrast during playback.

• Select [Black Level] in [VIDEO] menu.

Select this to enhance the black level.

Off

Select this for the standard black level setting.

• This function is only available for CVBS (composite video)

and S-video output.

• This setting has no effect if the [TV Type] is set to [PAL] (see

“Step 3: Setting a TV type” on page 14).

Video setup menu

1/1

SETUP

GENERAL

AUDIO

SPEAKER

VIDEO

HDMI

DISC

TV Display

TV Type

Black Level*1

Closed Caption*1

Still Mode

Progressive Scan

Scart Video Out*2

Picture Setting

Select : Enter

Move :

Return

*1: [Black Level] and [Closed Caption] are only for U.S.A. and

Canada models.

*2: [Scart Video Out] is only for U.K. and Europe models.

Setting

Playback

disc

TV display

16:9

4:3

Notes

Setting

Playback

disc

TV display

4:3 Pan

Scan

16:9

4:3

4:3 Letter

Box

16:9

4:3

32 En

SETUP MENU

Selecting the closed caption

(U.S.A. and Canada models only)

Closed captions are data hidden in the video signals of

specific discs, and are invisible without the use of a special

decoder. The difference between subtitles and captions is

that subtitles are intended for hearing persons and captions

are for the hearing impaired. Subtitles rarely show all of

the audio. For example, captions show sound effects (e.g.,

“phone ringing” and “footsteps”), while subtitles do not.

Before you select this setting, please ensure that the disc

contains closed caption information and your TV set also

supports this function.

• Select [Closed Caption] in [VIDEO] menu.

Select this to enable the closed caption function.

Off

Select this to disable the closed caption function.

• This function is only available for CVBS (composite video)

and S-video output.

• Even if this setting is set to [On], the closed caption function is

not available when this unit is connected via the HDMI jack

and the HDMI mode is set to on.

Setting the still mode

You can select the still picture quality.

• Select [Still Mode] in [VIDEO] menu.

Field

Select this for the standard still mode setting. This setting

is suitable for playback of quick motion scenes.

Frame

Select this if the picture is unstable when you select

[Field].

Selecting the progressive scan

function

This function is only available if you have connected this

unit to a progressive scan TV through the component

video jacks (see “Component video jacks <D>” on

page 12). This function is enable you to enjoy accurate

color reproduction and high quality images. This unit

features DCDi circuit.

• Select [Progressive Scan] in [VIDEO] menu.

Select this to enable the progressive scan function.

The confirmation screen appears if you select this.

In this case, select [Yes] to set to [On], and then press

ENTER.

Off

Select this to disable the progressive scan function.

The P.SCAN indicator on the front panel display lights up during

progressive playback.

Notes on activating progressive scan:

• In progressive mode, 4:3 aspect images are stretched

horizontally on the widescreen TV. Change the aspect

ratio settings of your TV if you want to watch the

original aspect ratio images without distortion. You can

also change the aspect ratio settings in [Wide Screen

Format] menu (see “Selecting the wide screen format”

on page 34).

• Ensure that your TV is equipped with progressive scan.

• Connect using a component video cable.

Notes

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH

DEFINITION TELEVISION SETS ARE FULLY

COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE

ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN

CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE

PROBLEMS, IT IS RECOMMENDED THAT THE USER

SWITCH THE CONNECTION TO THE “STANDARD

DEFINITION” OUTPUT. IF THERE ARE QUESTIONS

REGARDING OUR VIDEO MONITOR COMPATIBILITY

WITH THIS MODEL 525P AND 625P DVD PLAYER,

PLEASE CONTACT OUR CUSTOMER SERVICE

CENTER.

This unit is compatible with the complete line of YAMAHA

products, including the projectors DPX-1300, DPX-830 and

the plasma monitor PDM-4220.

33 En

SETUP MENU

English

Switching the SCART video out

(U.K. and Europe models only)

Select this setting to toggle the video signal output from

the AV terminal between CVBS (composite video) and

RGB.

• Select [Scart Video Out] in [VIDEO] menu.

CVBS

Select this to output composite video signals.

RGB

Select this to output RGB video signals.

Adjusting picture settings

This unit comes with 10 sets of picture color settings that

you can define yourself.

• Select [Picture Setting] in [VIDEO] menu.

Brightness

Set this to adjust the overall brightness of the image.

Control range: 0 to +6

Contrast

Set this to adjust the bright areas (white level) in the

image.

Control range: –6 to +6

Hue

Set this to adjust the hue or phase of the image.

Control range: –6 to +6

Sharpness Mid

Set this to adjust the sharpness of the image for the

intermediate frequencies.

Control range: –6 to +6

Sharpness High

Set this to adjust the sharpness of the image for the high

frequencies.

Control range: –6 to +6

DNR

Set this to reduce video noise.

Control range: 0 to +6

Gamma

Set this to adjust the intensity of the picture non-linearly.

Control range: –6 to +6

Chroma level

Set this to adjust the density of the color.

Control range: –6 to +6

Chroma delay

Set this to adjust the advance delay of the chroma signal

for a perfectly clear picture.

Control range: –2 to +2

True Life

Set this to produce more dynamic picture by increasing

the picture contrast and the color intensity.

Control range: 0 to +6

• All picture settings are not available for CVBS (composite

video) and S-video output.

• The [Hue] setting is not available for interlace output at the

VIDEO OUT (COMPONENT) jacks.

• [Sharpness Mid], [Sharpness High], [Gamma] and [Chroma

delay] settings are not available for HDMI output.

• The [True Life] setting is only available for progressive scan

and HDMI output.

Setting the HDMI video

You can adjust the resolution depending on the monitor

you are using. This function is only available when this

unit is connected to an HDMI-compatible component via

the HDMI jack.

Notes

HDMI setup menu

1/1

SETUP

GENERAL

AUDIO

SPEAKER

VIDEO

HDMI

DISC

HDMI Video

Wide Screen Format

DVI Output Range

HDMI Audio

Select : Enter

Move :

Return

34 En

SETUP MENU

• Select [HDMI Video] in [HDMI] menu.

480P/576P

Select this for 480/576 progressive-scan video.

720P

Select this for 720 progressive-scan video.

1080I

Select this for 1080 interlace video.

1080P

Select this for 1080 progressive-scan video.

Auto

Select this to set this unit to the best resolution setting

automatically based on your monitor.

• When [TV Type] is set to [NTSC] or [PAL], video signals with

480P or 576P are output accordingly.

• While HDMI video signals are being output, component video

is muted.

• For settings other than [Auto], be sure that the selected

resolution is supported by the HDMI compatible monitor you

are using.

If the selected resolution is not supported, this setting is

automatically switched to the most appropriate resolution.

• When you select [1080P] and use an HDMI cable longer than

5m, the picture quality may decrease.

Refer to the manual supplied with your monitor to select the

appropriate aspect ratio.

Selecting the wide screen format

Set the aspect ratio of the projected images on the screen.

This function is only available for progressive scan and

HDMI output.

• Select [Wide Screen Format] in [HDMI] menu.

NL Stretch

Select this to display of 4:3 image on the 16:9 screen with

non-linear stretching. (The center position of the screen is

stretched less than the side.)

Pillar Box

Select this to display 4:3 image on the 16:9 screen without

stretching.

Off

Select this to make no aspect ratio adjustment.

Selecting the DVI output range

You can select the DVI output range to match the

connected component. This function is only available

when this unit is connected to an DVI-D-compatible

component via the HDMI jack.

• Select [DVI Output Range] in [HDMI] menu.

Standard

Select this if you cannot see the correct image when you

select [Enhanced].

Enhanced

Select this if black and white in the image is not distinct.

Notes

35 En

SETUP MENU

English

Setting the HDMI audio

Set the HDMI audio output to match the connected

component. This function is only available when this unit

is connected to an HDMI-compatible component via the

HDMI jack.

For details about the relationship between the audio

format and the setting, see “HDMI Audio output table” on

page 41.

• Select [HDMI Audio] in [HDMI] menu.

Auto

Select this to set this unit to the best setting automatically

based on the component you have connected via the

HDMI jack.

PCM

Select this to output the decoded multi-channel or 2ch

linear PCM audio signals via the HDMI jack.

Off

Select this to turn off the HDMI audio output.

• SA-CD signals cannot be output using HDMI.

• When [HDMI Audio] is set to [Auto] or [PCM], digital output

signals are muted.

Selecting the default audio/subtitle/

DVD menu language

These menus contain various language options for the

audio, subtitles and disc menus recorded on the DVD. For

details, see “Setting the audio, subtitle and disc menu

languages” on page 15.

Selecting an angle mark display

You can switch an angle mark display on or off when

sequences recorded from different camera angles are

played back.

• Select [Angle Mark] in [DISC] menu.

Select this if you want to display an angle mark. An angle

mark is displayed continuously.

Off

Select this if you do not want to display an angle mark. An

angle mark appears for five seconds, and then disappears.

Selecting the PBC (playback control)

function

You can set playback control (PBC) to on or off. This

function is available only on Video CD 2.0 with the

playback control (PBC) feature.

• Select [PBC] in [DISC] menu.

Select this to display a disc menu.

Off

Select this not to display a disc menu.

You can also use the MENU button on the remote control to turn

on or off the playback control (PBC) function (see “Using the

Video CD playback control (PBC) menu (VCD/SVCD)” on

page 19).

Setting the duration for a slide show

You can set the duration that the slides for JPEG files are

displayed.

• Select [Time Interval] in [DISC] menu.

2 sec to 10 sec

(Control step: 1 second)

This setting may not work correctly depending on file sizes.

Notes

DISC setup menu

1/1

SETUP

GENERAL

AUDIO

SPEAKER

VIDEO

HDMI

DISC

AUDIO Language

Subtitle Language

DVD Menu Language

Angle Mark

PBC

Time Interval

Select : Enter

Move :

Return

Note

LANGUAGE CODE LIST

36 En

LANGUAGE CODE LIST

Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919

Afar 1111 Finnish 1619 Lithuanian 2230 Slovak 2921

Afrikaans 1116 French 1628 Macedonian 2321 Slovenian 2922

Albanian 2927 Frisian 1635 Malagasy 2317 Somali 2925

Amharic 1123 Galician 1722 Malay 2329 Spanish 1529

Arabic 1128 Georgian 2111 Malayalam 2322 Sundanese 2931

Armenian 1835 German 1415 Maltese 2330 Swahili 2933

Assamese 1129 Greek 1522 Maori 2319 Swedish 2932

Aymara 1135 Greenlandic 2122 Marathi 2328 Tagalog 3022

Azerbaijani 1136 Guarani 1724 Moldavian 2325 Tajik 3017

Bashkir 1211 Gujarati 1731 Mongolian 2324 Tamil 3011

Basque 1531 Hausa 1811 Nauru 2411 Tatar 3030

Bengali; Bangla 1224 Hebrew 1933 Nepali 2415 Telugu 3015

Bhutani 1436 Hindi 1819 Norwegian 2425 Thai 3018

Bihari 1218 Hungarian 1831 Oriya 2528 Tibetan 1225

Breton 1228 Icelandic 1929 Panjabi 2611 Tigrinya 3019

Bulgarian 1217 Indonesian 1924 Pashto, Pushto 2629 Tonga 3025

Burmese 2335 Interlingua 1911 Persian 1611 Turkish 3028

Byelorussian 1215 Irish 1711 Polish 2622 Turkmen 3021

Cambodian 2123 Italian 1930 Portuguese 2630 Twi 3033

Catalan 6765 Japanese 2011 Quechua 2731 Ukrainian 3121

Chinese 3618 Javanese 2033 Raeto-Romance 2823 Urdu 3128

Corsican 1325 Kannada 2124 Romanian 2825 Uzbek 3136

Croatian 1828 Kashmiri 2129 Russian 2831 Vietnamese 3219

Czech 1329 Kazakh 2121 Samoan 2923 Volapük 3225

Danish 1411 Kirghiz 2135 Sanskrit 2911 Welsh 1335

Dutch 2422 Korean 2125 Scots Gaelic 1714 Wolof 3325

English 1524 Kurdish 2131 Serbian 2928 Xhosa 3418

Esperanto 1525 Laothian 2225 Serbo-Croatian 2918 Yiddish 2019

Estonian 1530 Latin 2211 Shona 2924 Yoruba 3525

Faroese 1625 Latvian, Lettish 2232 Sindhi 2914 Zulu 3631

37 En

TROUBLESHOOTING

English

Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below

or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized

YAMAHA dealer or service center.

TROUBLESHOOTING

Problem Solution

See

page

No power Connect the AC power cable properly. 12

Press STANDBY/ON on the front panel of this unit to turn on the

power.

No picture Refer to the manual supplied with your TV for correct Video In

channel selection. Change the TV channel until you see the DVD

screen.

–

Turn on your TV. –

If [Progressive Scan] is set to [On], check that you have connected

this unit to a progressive scan TV through the component video jacks.

Otherwise, follow the steps below to turn off the progressive scan;

1. Press on the front panel to open the disc tray.

2. Press CLEAR on the remote control.

3. Press “2580” using the numeric buttons (0-9) on the remote

control.

4. Press AUDIO on the remote control.

If [HDMI Video] is set to other than [Auto], check that the resolution

is supported by the HDMI-compatible monitor you have connected.

Otherwise, follow the steps below to change the setting to [Auto];

1. Press

s twice on the front panel or STOP (

) twice on the

remote control to stop playback.

2. Press and hold

s and p/e on the front panel at the same time for

three seconds.

If the HDMI indicator flashes orange, check that you have connected

this unit to an HDCP-compatible component.

Check that the video signal output setting matches the video

connection.

Completely distorted picture or

black/white picture

Check that the disc is compatible with this unit. 3

Check that the TV type of this unit is set to match that of the disc and

your TV. If you set the TV type improperly, follow the steps below to

return to the default setting;

1. Press on the front panel to open the disc tray.

2. Press CLEAR on the remote control.

3. Press “2580” using the numeric buttons (0-9) on the remote

control.

4. Press AUDIO on the remote control.

Check the video connection. 11

The screen size looks unnatural,

or the caption is displayed only

partially on the TV monitor or is

not displayed at all

Check that the TV setting of this unit matches the screen size of your

TV.

Change the screen size and the aspect ratio of your TV. –

38 En

TROUBLESHOOTING

Problem Solution

See

page

No sound or distorted sound Adjust the volume. –

Check that the speakers are connected properly. –

Adjust the volume level in the setup menu. 30

No audio at digital output Check the digital connections. 11

If you are playing a DTS source, check that your receiver can decode

DTS and [Digital Out] is set to [All]

If you are playing an MPEG-2 source, check that your receiver can

decode MPEG-2. Otherwise, make sure that [Digital Out] is set to

[PCM].

Check that the audio format of the selected audio language matches

your receiver capabilities.

–

No audio at HDMI output Make sure that [HDMI Audio] is set to [Auto] or [PCM]. 35

No audio signals via the HDMI jack are output if the DVI-D

component is connected to this unit using the HDMI-DVI converter

cable.

To output audio signals via the HDMI jack, connect an HDMI

component to this unit.

Disc does not play The CD-R/RW, DVD+R/RW and DVD-R/RW must be finalized. –

Check that the disc label is facing up. 16

Check that the disc is defective by trying another disc. –

If you have recorded a JPEG, MP3 or WMA disc yourself, check that

your disc contains at least ten JPEG picture files or five MP3/WMA

music tracks.

–

Check the region code. 3

Picture freezes momentarily

during playback

Check the disc for fingerprints/scratches and clean it with a soft cloth

wiping from the center to the edge.

This unit does not respond to

the remote control

Aim the remote control directly at the remote control sensor on the

front panel.

Reduce the distance of the remote control from this unit. 13

Replace the batteries in the remote control. 13

Reinsert the batteries with their polarities (+/– signs) as indicated. 13

Buttons do not work Disconnect the power cable from the AC outlet for a few minutes.

Reconnect the power cable and try to operate again as usual.

–

This unit does not respond to

some operating commands

during playback

Operations may not be permitted by the disc. Refer to the instructions

of the disc jacket.

–

Menu items cannot be selected Depending on the connection status or disc availability, some menu

items cannot be selected.

–

No sound during DivX movies

playback

The audio code may not be supported by this unit. –

39 En

GLOSSARY

English

■ Aspect ratio

Horizontal and vertical ratio of a displayed image. The

horizontal vs. vertical ratio of conventional TV is 4:3, and

that of wide-screens is 16:9.

■ Bit

Short for binary digit. Represents the smallest unit of

information manipulated on a computer. In audio systems,

the bit size determines resolution to digitize analog

signals.

The larger the bit size, the larger the dynamic range (the

ratio of maximum and minimum frequency level) and the

finer the sounds. Generally, an audio CD is 16 bit and

DVD audio is 24 bit.

■ Bit rate

The amount of data used to hold a given length of music;

measured in kilobits per second, or kbps. Also, the speed

at which you record. Generally, the higher the bit rate, or

recording speed, the better the sound quality. However,

higher bit rates use more space on a disc.

■ Component video jacks

Jacks for inputting or outputting a component video

signal.Component video signal consists of three lines, the

luminance signal (Y) and two color difference signals (P

B, PR/CR), which enable to provide high-quality video.

■ DivX

DivX is a popular media technology created by DivX, inc.

DivX media files contain highly compressed video with

high visual quality that maintains a relatively small file

size. DivX files can also include advanced media features

like menus, subtitles, and alternate audio tracks. Many

DivX media files are available for download online, and

you can create your own using your personal content and

easy-to-use tools from DivX.com.

■ Dolby Digital

Digital surround sound system which is developed by

Dolby Laboratories provides completely independent

multi-channel audio. With 3 front channels (left, center,

and right) and 2 surround stereo channels, Dolby Digital

provides five full-range audio channels. With an additional

channel especially for bass effects (called LFE, or low

frequency effect), the system has a total of 5.1-channels

(LFE is counted as 0.1 channel). By using 2-channel

stereo for the surround speakers, more accurate moving

sound effects and surround sound environment are

possible than with Dolby Surround.

■ DTS (Digital Theater Systems)

Digital surround sound system developed by Digital

Theater Systems, Inc., which provides 5.1 channel audio

(max). With an abundance of audio data, it is able to

provide authentic-sounding effects.

■ DVD-Audio

It has developed for the sole purpose of creating high

quality pure sound with Linear PCM and Packed PCM

(lossless coding) in up to six audio-channels. Sampling

frequencies of 192 kHz/24 bits are supported.

■ HDMI

HDMI (High-Definition Multimedia Interface) is the first

industry-supported, uncompressed, all-digital A/V (audio/

video) interface. Providing an interface between any A/V

source (such as a set-top box or A/V receiver) and an

audio/video monitor (such as a digital television – DTV),

HDMI supports standard, enhanced or high-definition

video as well as multi-channel digital audio using a single

cable.

HDMI transmits all ATSC HDTV standards and supports

8-channel digital audio, with bandwidth to spare to

accommodate future enhancements and requirements.

GLOSSARY

40 En

GLOSSARY

■ Interlace

The most common type of scanning used in televisions. It

divides a screen into even and odd numbered fields for

scanning, and then builds an image by combining them

into one image (frame).

■ JPEG (Joint Photographic Expert Group)

A standardized image compression system proposed by

the Joint Photographic Expert Group. It can reduce image

data sizes to 1 to 10% of their original sizes, and works on

digital photographs effectively.

■ MP3 (MPEG Audio Layer-3)

An audio file compression technology. It can reduce audio

data sizes to about 10% of their original sizes while

maintaining CD-level audio quality.

■ MPEG (Moving Pictures Experts Group)

International standard for digital video and audio

compression generated by ISO (International Organization

for Standardization) and IEC (International

Electrotechnical Commission).

Includes MPEG-1, MPEG-2, and MPEG-3. MPEG-1

offers VHS level video quality and is often used on video

CDs. MPEG-2 offers S-VHS level video quality and is

often used on DVDs.

■ Parental control

Limits Disc play according to the age of the users or the

limitation level in each country. The limitation varies from

disc to disc; when it is activated, playback will be

prohibited if the software’s level is higher than the user-set

level.

■ Playback control (PBC)

An on-screen menu recorded on a Video CD or SVCD that

enables interactive playback and searching.

■ Progressive Scan

A method of displaying all scanning lines in a frame at

once, reducing flicker noticeable on a larger screen and

creating a sharp and smooth image.

■ Region code

Many DVD discs include a region code so that the

only to regions where they are ready to distribute. There

are six regions codes, which restrict a DVD player to

playing a DVD disc with the same region code.

■ S-video jack

A jack for inputting or outputting an S-video signal.

S-video signal consists of two lines, the luminance signal

(Y) and color signal (C), which enable to provide high-

quality video during playback or recording.

■ Super Audio CD

Audio format based upon the current CD standards but

includes a greater amount of information that provides

higher quality sound. There are three types of discs: single

layer, dual layer and hybrid discs. The hybrid disc can be

played on existing CD players as well as Super Audio CD

players since it contains both standard audio CD and

Super Audio CD information.

Super Audio CD Disc

Single layer disc

HD layer

Dual layer disc

Hybrid layer disc

HD layer CD layer

HD layer

Hybrid Super Audio CD Disc

CD layer that plays on any

CD player

- High Quality DSD Stereo

- High Quality DSD Multi-

channel

High Density layer containing:

41 En

GLOSSARY

English

■ HDMI Audio output table

*1: If the connected HDMI component does not support bitstream signals (Dolby Digital, DTS, and MPEG), the audio

output is automatically changed from bitstream signals to PCM signals.

*2: If the HDMI component does not support multi-channel audio signals, the audio output is automatically changed

from PCM multi-channel signals to PCM stereo signals and 48 kHz/16 bits signals or less.

*3: If the audio source is prohibited downmixing, the front L/R channel audio and 48 kHz/16 bits signals or less are

output instead of downmixed stereo.

*4: If the connected component does not support more than 48 kHz, the audio output is automatically changed to 48 kHz/

16 bits signals or less.

Audio format

Analog output

setting

HDMI Audio

Auto*1 PCM Off

DVD-Video

Dolby Digital

Multi channel

Dolby Digital

PCM multi*2

Off

Stereo PCM 2ch

DTS

Multi channel

DTS

PCM multi*2

Stereo PCM 2ch

MPEG

Multi channel

MPEG

PCM multi*2

Stereo PCM 2ch

PCM 2ch*4 Multi channel/Stereo PCM 2ch PCM 2ch

DVD-Audio

Multi

Multi channel PCM (PPCM) multi*2,3 PCM (PPCM) multi*2,3

Stereo PCM (PPCM) 2ch*3 PCM (PPCM) 2ch*3

2ch*4 Multi channel/Stereo PCM (PPCM) 2ch PCM (PPCM) 2ch

CD/MP3/

WMA/DivX

2ch Multi channel/Stereo PCM 2ch PCM 2ch

DTS-CD

Multi

Multi channel

DTS

PCM multi*2

Stereo PCM 2ch

2ch Multi channel/Stereo PCM 2ch

VCD 2ch Multi channel/Stereo PCM 2ch PCM 2ch

SVCD

Multi

Multi channel

MPEG

PCM multi*2

Stereo PCM 2ch

2ch Multi channel/Stereo PCM 2ch

SA-CD Multi/2ch Multi channel/Stereo – – –

SPECIFICATIONS

42 En

PLAYBACK SYSTEM

• DVD-Video

• DVD-Audio

• DVD-R, DVD-RW

• DVD+R, DVD+RW, DVD+R DL

• Video CD, SVCD

• SA-CD multi-channel and SA-CD stereo

•CD

• PICTURE CD

• CD-R, CD-RW

VIDEO PERFORMANCE

• Video (CVBS) output ................................... 1 Vpp into 75 ohm

• S-video output.......................................... Y: 1 Vpp into 75 ohm

C: 0.3 Vpp into 75 ohm

• Component video output.......................... Y: 1 Vpp into 75 ohm

B/CB, PR/CR: 0.7 Vpp into 75 ohm

• RGB (SCART) output

(U.K. and Europe models only) ................. 0.7 Vpp into 75 ohm

• Black level shift

(U.S.A. models only) .......................................................On/Off

AUDIO FORMAT

• Digital

Dolby Digital / DTS / MPEG....................Compressed Digital

PCM ........................ 16, 20, 24 bits / fs 44.1, 48, 88.2, 96 kHz

MP3 (ISO 9660)

.................. 32–320 kbps / fs 16, 22.05, 24, 32, 44.1, 48 kHz

WMA ............................................ 64–320 kbps, mono, stereo

• Full decoding of Dolby Digital and DTS multi-channel sound

• Analog stereo sound

• Dolby surround compatible downmix from Dolby Digital multi-

channel sound

AUDIO PERFORMANCE

• DA Converter......................................................24 bit, 192 kHz

• Signal-Noise (1 kHz) .......................................................115 dB

• Dynamic range (1 kHz)....................................................105 dB

• DVD......................................................fs 96 kHz, 2 Hz–44 kHz

fs 48 kHz, 2 Hz–22 kHz

• SVCD....................................................fs 48 kHz, 2 Hz–22 kHz

fs 44.1 kHz, 2 Hz–20 kHz

• CD/VCD ............................................fs 44.1 kHz, 2 Hz–20 kHz

• Distortion and Noise (1 kHz).......................................... 0.002%

TV STANDARD

• Number of lines........................................PAL: 625, NTSC: 525

• Vertical frequency............................. PAL: 50 Hz, NTSC: 60Hz

• Playback..........................................Multistandard (PAL/NTSC)

CONNECTIONS

• Video output.................................................... 1 (Cinch: yellow)

• S-video output............................................ 1 (Mini DIN, 4 pins)

• Component video output

Y output.......................................................... 1 (Cinch: green)

B/CB output .................................................... 1 (Cinch: blue)

R/CR output ...................................................... 1 (Cinch: red)

• SCART (U.K. and Europe models) ............... 1 (Euroconnector)

• Digital output

Coaxial ......................................................... 1 (Cinch: orange)

Optical..................................1 (IEC 60958 for CDDA/LPCM,

IEC 61937 for MPEG 1/2, Dolby Digital, DTS)

HDMI ......................................................................1 (Type A)

• 2 channel analog output (L+R) ............1 pair (Cinch: white/red)

• 6 channel analog output

Audio Front L/R................................1 pair (Cinch: white/red)

Audio Surround L/R..........................1 pair (Cinch: white/red)

Audio Center ...................................................1 (Cinch: black)

Audio Subwoofer ............................................1 (Cinch: black)

CABINET

• Dimensions (W x D x H) .......................... 435 x 284.5 x 87 mm

(17–1/8 x 11–3/16 x 3–7/16 inch)

• Weight............................................ Approx. 3.3 kg (7 lbs. 4 oz.)

POWER SUPPLY

• Power inlet

U.S.A. and Canada models .......................... AC 120 V, 60 Hz

Australia model ............................... AC 100–240 V, 50/60 Hz

U.K. and Europe models.............................. AC 230 V, 50 Hz

China model ......................................... AC 100–240 V, 50 Hz

Korea and Taiwan models............... AC 100–240 V, 50/60 Hz

Asia model ...................................... AC 100–240 V, 50/60 Hz

• Power consumption...............................................Approx. 21 W

• Power consumption (standby).........................................< 0.5 W

Specifications are subject to change without prior notice.

SPECIFICATIONS

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

DVD AUDIO/VIDEO SA-CD PLAYER

LECTEUR DE DVD AUDIO/VIDEO SA-CD

DVD-S1700

HDMI AUDIO DIRECT

STANDBY

Printed in China CQX1A1126Z

00cv_DVD-S1700_U.fm Page 1 Wednesday, June 28, 2006 4:24 PM

Yamaha DVD-S1700B Manual de usuario

Marca: Yamaha

Modelo: DVD-S1700B

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Este manual también es adecuado para

DVD-S1700

Descargar PDF

informe

En otros idiomas

français: Yamaha DVD-S1700B Manuel utilisateur
italiano: Yamaha DVD-S1700B Manuale utente
English: Yamaha DVD-S1700B User manual
Deutsch: Yamaha DVD-S1700B Benutzerhandbuch
русский: Yamaha DVD-S1700B Руководство пользователя
Nederlands: Yamaha DVD-S1700B Handleiding
português: Yamaha DVD-S1700B Manual do usuário
dansk: Yamaha DVD-S1700B Brugermanual
polski: Yamaha DVD-S1700B Instrukcja obsługi
čeština: Yamaha DVD-S1700B Uživatelský manuál
svenska: Yamaha DVD-S1700B Användarmanual
Türkçe: Yamaha DVD-S1700B Kullanım kılavuzu
română: Yamaha DVD-S1700B Manual de utilizare

Yamaha DVD-S1700B Manual de usuario

Este manual también es adecuado para

Yamaha DVD-S1700B Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos