Please do not format its file system when formatting the USB, SD/MMC card.
This unit can supports the USB/SD/MMC Card with max. memory size of 32GB.
Basic Control:
1. Power switch / Mute
1) Press PWR button to turn on the unit. Press again to turn off the unit.
2) Press MUTE button to mute down the sound, press and hold this button again to release from
MUTE mode and recover previous volume level.
2. Mode button
1) Plug in USB/SD/MMC Card under radio mode, this unit will change to USB/SD/MMC card
mode;
2) Plug in SD/MMC card under USB mode, this unit will change to SD/MMC card mode;
3) Plug in USB under SD/MMC card mode, this unit will change to USB mode.
4) This unit will change to radio mode when USB/SD/MMC card is removed.
5) Press MOD button to change the mode when USB/SD/MMC card is plugged in. USB mode is
preseted when switching on the unit.
3. Time display and setting
1) Time will be displayed after slightly press the CLK button.
The LCD display will return back to its original display after 5 seconds.
2) Press and hold CLK button to set the time, time on the display will be blinking. Then slightly
rotate the rotary knob or VOL-/VOL+ on the remote control to set the hour. Press SEL to
confirm the hour setting.
3) Then rotate the rotary knob or VOL-/VOL+ on remote control again to set the minute. To
confirm the time setting, simply by pressing SEL button.
4. Audio mode selector
1) Rotate audio mode selector to increase/decrease the volume level.
2) Press audio mode selector, “VOL, BAS, TRE, BAL, FAD, LOUD, DX, ST” on the display, then
rotate the audio mode selector to increase/decrease the volume, bass, treble, balance, fader,
loud on/off, DX/LOC, stereo/mono.
3) Press and hold the audio selector to activate the equalization function and on select desired
audio mode. DSP mode, Classic, Rock, Flat, Pop repeat in circulation.
Note: If EQ is on, unit will not be able to control BASS & TREBLE function.
Radio Control
1. Band Control
1) Press BND button to select the band, repeatedly to cycle through 5 radio band:
FM1 – FM2 – FM3 – AM1 – AM2
2) Hold and press AMS/S button or APS button, the radio will scan up all the strongest station
and preset automatically in 1-6 number keys.
In FM mode, 18 stations can be stored from FM1-FM3 mode;
In AM mode, 12 stations can be stored from AM1-AM2 mode.
Press any number button to enjoy the stored station.
2. Tuning Button
Press to auto tune the desire radio station, press and hold the button again, manual