Andersen Hinged Side Stop Replacement Service Instructions
- Tipo
- Service Instructions
Use caution when working at elevated heights and around unit openings.
Follow manufacturers’ instructions for ladders and/or scaffolding. Failure
to do so may result in injury or death.
Sea cauteloso al trabajar en lugares elevados y cerca de las aberturas de
la unidad. Siga las instrucciones del fabricante para el uso de escaleras
y/o andamios. Si no lo hiciera, podrían producirse lesiones o la muerte.
Follow manufacturers’ instructions for hand or power tools. Always
wear safety glasses. Failure to do so may result in injury and/or
product damage.
Siga las instrucciones del fabricante para el uso de herramientas
eléctricas o manuales. Utilice siempre gafas de seguridad. Si no lo
hiciera, podrían producirse lesiones y/o daños al producto.
9069230 BA Revised 06/20/13
Tools Needed Herramientas necesarias
∙Safety Glasses Lentes de seguridad
∙Flat Pry Bar
∙Finish Nailer (optional) Flat Pry Bar
∙Finish Nailer (optional)
Hinged Side Stop Replacement
for E-Series Push Out Casement Windows
for E-Series/Eagle® Push Out Casement Windows
Parts Included Partes incluidas
(1) Hinged Side Stop Hinged Side Stop
Hinged Side Stop
Thank you for choosing Andersen.
For questions call 1-888-888-7020. For more information and/or guides visit www.eaglewindow.com.
Please leave this guide with building owner.
Si tiene alguna pregunta llame al 1-888-888-7020. Para obtener más información y/o guías, visite www.eaglewindow.com
Deje esta guía con el dueño de la construcción.
▶Read guide from beginning to end before starting installation. Read all warnings and cautions during unit installation.
Lea completamente la guía antes de comenzar la instalación. Lea y respete todas las advertencias y precauciones durante la instalación de la unidad.
▶Check with your local building code ofcial to identify and conrm compliance with local building code requirements.
Consulte los códigos locales de construcción para identicar y conrmar que se cumplan los requisitos del código de construcción.
“Andersen” and all other marks where denoted are trademarks of Andersen Corporation and its subsidiary. ©2013 Andersen Corporation. All rights reserved.
1
Interior
3
Interior
2
Interior
4
Interior
2
9069230
Insert at pry bar between head and sill stop and frame. Apply pressure towards stop to release
from spline. Save for reuse.
Insert at pry bar between head and sill stop and frame. Apply pressure towards stop to release
from spline.
Slide head and sill stop into place and engage into spline on frame. Fasten head or sill stop using
nish nailer, if desired.
▶Hinged side stop replacement is complete.
Hinged side stop replacement is completed.
Slide replacement side stop into place and
engage into spline on frame.
Slide replacement side stop into place and
engage into spline on frame.
Side Stop
Flat Pry
Bar
Frame
Sill Stop
Spline
Head Stop
Spline
Frame
Head Stop
Flat Pry Bar
Frame
Sill Stop
Flat Pry Bar
Insert at pry bar between side stop and
frame. Apply pressure towards stop to release
from spline. Dispose of side stop properly.
-
1
-
2
Andersen Hinged Side Stop Replacement Service Instructions
- Tipo
- Service Instructions
en otros idiomas
Artículos relacionados
-
Andersen Side Stop Replacement Service Instructions
-
-
-
-
-
-
-
-
-