Andersen Head Stop Replacement Service Instructions

Tipo
Service Instructions
Use caution when working at elevated heights and around unit openings.
Follow manufacturers’ instructions for ladders and/or scaffolding. Failure
to do so may result in injury or death.
Sea cauteloso al trabajar en lugares elevados y cerca de las aberturas de
la unidad. Siga las instrucciones del fabricante para el uso de escaleras
y/o andamios. Si no lo hiciera, podrían producirse lesiones o la muerte.
Follow manufacturers’ instructions for hand or power tools. Always
wear safety glasses. Failure to do so may result in injury and/or
product damage.
Siga las instrucciones del fabricante para el uso de herramientas
eléctricas o manuales. Utilice siempre gafas de seguridad. Si no lo
hiciera, podrían producirse lesiones y/o daños al producto.
9069227 BA Revised 06/20/13
Tools Needed Herramientas necesarias
Safety Glasses Lentes de seguridad
Flat Pry Bar Flat Pry Bar
Finish Nailer Finish Nailer
End Cutting Tool End Cutting Tool
Head Stop Replacement
for E-Series French Casement and Casement & Awning Windows with Standard or Piano Hinge
for E-Series/Eagle® French Casement and Casement & Awning Windows with Standard or Piano Hinge
Parts Included Partes incluidas
(1) Head Stop
Head Stop
Thank you for choosing Andersen.
For questions call 1-888-888-7020. For more information and/or guides visit www.eaglewindow.com.
Please leave this guide with building owner.
Si tiene alguna pregunta llame al 1-888-888-7020. Para obtener más información y/o guías, visite www.eaglewindow.com
Deje esta guía con el dueño de la construcción.
Read guide from beginning to end before starting installation. Read all warnings and cautions during unit installation.
Lea completamente la guía antes de comenzar la instalación. Lea y respete todas las advertencias y precauciones durante la instalación de la unidad.
Check with your local building code ofcial to identify and conrm compliance with local building code requirements.
Consulte los códigos locales de construcción para identicar y conrmar que se cumplan los requisitos del código de construcción.
Standard casement window shown in guide.
Andersen” and all other marks where denoted are trademarks of Andersen Corporation and its subsidiary. ©2013 Andersen Corporation. All rights reserved.
Remove any brad nails or debris from area.
Remove any brad nails or debris from area.
Insert at pry bar between head stop and frame and pry down to
release head stop.
Insert thin blade pry bar between head stop and frame and pry down
to release head stop.
Slide new head stop into place.
Slide new head stop into place.
Fasten new head stop.
Fasten new head stop.
2
9069227
Head stop replacement is complete.
Head stop replacement is completed.
Remove head stop and dispose of properly.
Remove head stop and dispose of properly.
End Cutting Tool
Head Stop
Finish Nailer
1
Interior
2
Interior
3
Interior
4
Interior
5
Interior
Frame
Head Stop
Flat Pry Bar
  • Page 1 1
  • Page 2 2

Andersen Head Stop Replacement Service Instructions

Tipo
Service Instructions

En otros idiomas