E
B
A
D
F
G
Nota:
Unir las
etiquetas
A
Left leg
Pata izquierda
1 part/pieza
B
Right leg
Pata derecha
1 part/pieza
C
Modesty panel
Frontal de lámina
1 part/pieza
D
Support Bar
Barra
1 part/pieza
G
Safety knob 12 mm
Regatón 12 mm
2 parts/piezas
Dimensions
-Height:
29
1/2
"
-Width:
47
1/4
"
-Depth:
23
1/2
"
Note:
Match
colored stickers
E
Cover
Cubierta
1 part/pieza
E
A
D
B
C
B
A
Hook modesty panel
C
into legs
A
B
.
Enganchar el frontal
C
en laterales
A
B
.
Ensure top cover using safety knob of 12 mm
G
. Then adjust leveling glides
F
located under
the legs to level desk.
Asegurar la cubierta usando regaton de pillizco
de 12mm
G
. Despues para un piso irregular,
girar los niveladores
F
para elevar el escritorio.
Hook bar
D
into legs
A
B
.
Enganchar la barra
D
en los laterales
A
B
.
F
Leveling glides
Nivelador
4 parts/piezas
A
G
B
F
Place top cover
E
on top of the legs
A
B
.
Colocar cubierta
E
en los laterales
A
B
.
PAGE 1 DE 2
1
Basic desk/ Escritorio Basico
ZU776
Assembly Instructions
2
4
3
PAGE 2 DE 2
Cleaning and care of your furniture
Our furniture is manufactured using a high quality melamine laminate with durable pvc
edging. The melamine surface is highly resistant to common hazards such as
scratches, peeling, moisture and heat. There may be glue residue on the surface of
the furniture remaining from the manufacturing process. If you find residue, it can be
easily removed using a soft cloth moistened with isopropyl (rubbing alcohol). For
regular maintenance of your furniture, use a soft cloth with a mild cleaning solution.
Never use abrasives or harsh chemicals to clean the furniture as it may harm the
finish. Leveling glides can be adjusted to compensate for uneven floors.
Limpieza y cuidado de su mueble
Nuestros muebles son fabricados utilizando un melamina de alta calidad, laminado
con cubrecanto durable pvc. La superficie de melamina es altamente resistente a las
amenazas comunes, tales como rayones, golpes, humedad y el calor. Puede haber
restos de pegamento en la superficie del mobiliario, restante del proceso de
fabricación. Si se encontraran estos residuos, se pueden quitar fácilmente con un
paño suave, humedecido con isopropílico (alcohol de frotar). Para regular
mantenimiento de sus muebles, utilice un paño suave con una solución de limpieza.
Nunca utilice abrasivos ni químicos fuertes para limpiar el mueble ya que podría
dañar el acabado. Niveladores ajustables para compensar las irregularidades del
suelo.
Manufactured by/
Hecho por:
www.linea-italia.com.mx
Creaciones industriales S.A de C.V
Jose Ma. Chavez N. 643 CP. 20000
Aguascalientes, México
Made in Mexico/ Hecho en México
Limited 5-year warranty
Creaciones Industriales S.A de C.V (Crisa) warranties it’s products against manufacturing, material and
workmanship defects to the original purchaser from the date of purchase for a period of 5 years. The warranty
is subject to the products still being owned by the original purchaser and installed, used and maintained in
accordance with product instructions and warnings.
Warranty duration:
1) 5 years:
desk, bookcases, credenzas and file cabinets
2) 1 year:
plastic caps, locks, hinges, fabric, casters, panels and accessories.
Limitations:
Damage caused by the carrier-in-transit is handled under separate terms as defined by the carrier.
Exclusions:
1) Damage resulting from improper product installation, assembly or disassembly.
2) Normal wear and tear as expected over the course of ownership.
3) Modifications or attachments to the product not approved by CRISA - Linea Italia.
4) Product used for rental purpose.
5) Damage resulting from products stored in warehouse more than one year.
Warranty will not be applicable in the following cases:
1) Products that were not installed, used or routinely and properly maintained in accordance with product
instructions and warnings.
2) Product used in different conditions than intended.
3) Product not assembled according to the provided written instructions.
4) Product changed or repaired by non CRISA authorized personnel.
5) Defects occurring after the purchase by natural disasters, product modification, intentional damage, accident,
misuse, abuse, negligence or exposure to the elements.
6) Damages caused by third party carriers other than Creaciones Industriales S.A de C.V. (Linea Italia). To the
extent allowed by law, Crisa makes no other warranty, either express or implied, including any warranty of
merchantability or fitness for a particular purpose. Crisa will not be liable for any consequential or incidental
damages.
Notice to Purchaser for home or personal use:
Federal law does not permit the exclusion of certain implied warranties for consumer products. Therefore, if you
are purchasing this product for home or personal use, the exclusion of implied warranties noted in the above
paragraph does not apply to you. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you
specific legal rights, and many also have other rights, which vary from state to state.
Warranty procedure
1) Your Linea Italia reseller will work with CRISA in supporting the warranty request.
2) Defects must be reported immediately when discovered. Please contact Reseller from whom the product was
purchased and provide SKU#, invoice # or date of manufacture from the product.
3) Provide a detailed description of the problem with photos, lot number and invoice number, if available. It is
important not to remove any labels from the product as they provide important traceability information. It is
helpful if original product packaging is still available to provide photos of the product packaging.
4) A customer service representative from the Linea Italia reseller or CRISA will determine whether to provide
replacement parts, authorize repair or replace the product provided CRISA affirms that the products in question
is eligible under the conditions of the warranty as stated above.
5) CRISA will review the defect and determine whether it is related to material or workmanship. If the defect is
not related to manufacturing, cost of replacement parts and shipping will be the customer´s responsibility.
Creaciones Industriales S.A de C.V reserves the right to change products, technical specifications, accessory
combinations, colors images and data any time without notice.
-
1
-
2
En otros idiomas
Documentos relacionados
Otros documentos
-
Sauder 419954 Manual de usuario
-
-
-
-
-
-
-
-