Datalogic Magellan 2300HS Quick Reference Manual

Marca: Datalogic

Modelo: Magellan 2300HS

Categoría: Lectores de códigos de barras

Tipo: Quick Reference Manual

Este manual también es adecuado para

Megallan 2300HS?

Magellan

2300HS/2300HSΩ

Quick Reference Guide

Datalogic Scanning, Inc.

959 Terry Street

Eugene, Oregon 97402

Telephone: (541) 683-5700

Fax: (541) 345-7140

duced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates

("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and

transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices,

including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic

versions may either be downloadable from the Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you visit

our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Dat-

alogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the

right to change any specification at any time without prior notice.

Datalogic is a registered trademark of Datalogic S.p.A. and the Datalogic logo is a trademark of Datalogic S.p.A. all licensed to Datalogic Scan-

ning, Inc. All other trademarks and trade names referred to herein are property of their respective owners.

Magellan, FirstStrike and SurroundScan are registered trademarks of Datalogic Scanning, Inc. All-

Weighs, OmegaTek, Produce Rail, Productivity Index Reporting, SmartSentry and Any-Weighs are all

trademarks of Datalogic Scanning, Inc.

This product may be covered by one or more of the following patents: 4603262 • 4639606 • 4652750 • 4672215 • 4699447 • 4709369 • 4749879

• 4786798 • 4792666 • 4794240 • 4798943 • 4799164 • 4820911 • 4845349 • 4861972 • 4861973 • 4866257 • 4868836 • 4879456 • 4939355 •

4939356 • 4943127 • 4963719 • 4971176 • 4971177 • 4991692 • 5001406 • 5015831 • 5019697 • 5019698 • 5086879 • 5115120 • 5144118 •

5146463 • 5179270 • 5198649 • 5200597 • 5202784 • 5208449 • 5210397 • 5212371 • 5212372 • 5214270 • 5229590 • 5231293 • 5232185 •

5233169 • 5235168 • 5237161 • 5237162 • 5239165 • 5247161 • 5256864 • 5258604 • 5258699 • 5260554 • 5274219 • 5296689 • 5298728 •

5311000 • 5327451 • 5329103 • 5330370 • 5347113 • 5347121 • 5371361 • 5382783 • 5386105 • 5389917 • 5410108 • 5420410 • 5422472 •

5426507 • 5438187 • 5440110 • 5440111 • 5446271 • 5446749 • 5448050 • 5463211 • 5475206 • 5475207 • 5479011 • 5481098 • 5491328 •

5493108 • 5504350 • 5508505 • 5512740 • 5541397 • 5552593 • 5557095 • 5563402 • 5565668 • 5576531 • 5581707 • 5594231 • 5594441 •

5598070 • 5602376 • 5608201 • 5608399 • 5612529 • 5629510 • 5635699 • 5641958 • 5646391 • 5661435 • 5664231 • 5666045 • 5671374 •

5675138 • 5682028 • 5686716 • 5696370 • 5703347 • 5705802 • 5714750 • 5717194 • 5723852 • 5750976 • 5767502 • 5770847 • 5786581 •

5786585 • 5787103 • 5789732 • 5796222 • 5804809 • 5814803 • 5814804 • 5821721 • 5822343 • 5825009 • 5834708 • 5834750 • 5837983 •

5837988 • 5852286 • 5864129 • 5869827 • 5874722 • 5883370 • 5905249 • 5907147 • 5923023 • 5925868 • 5929421 • 5945670 • 5959284 •

5962838 • 5979769 • 6000619 • 6006991 • 6012639 • 6016135 • 6024284 • 6041374 • 6042012 • 6045044 • 6047889 • 6047894 • 6056198 •

6065676 • 6069696 • 6073849 • 6073851 • 6094288 • 6112993 • 6129279 • 6129282 • 6134039 • 6142376 • 6152368 • 6152372 • 6155488 •

6166375 • 6169614 • 6173894 • 6176429 • 6188500 • 6189784 • 6213397 • 6223986 • 6230975 • 6230976 • 6237852 • 6244510 • 6259545 •

6260763 • 6266175 • 6273336 • 6276605 • 6279829 • 6290134 • 6290135 • 6293467 • 6303927 • 6311895 • 6318634 • 6328216 • 6332576 •

6332577 • 6343741 • 6454168 • 6478224 • 6568598 • 6578765 • 6705527 • 6974084 • 6991169 •7051940 • AU703547 • D312631 • D313590 •

D320011 • D320012 • D323492 • D330707 • D330708 • D349109 • D350127 • D350735 • D351149 • D351150 • D352936 • D352937 • D352938

• D352939 • D358588 • D361565 • D372234 • D374630 • D374869 • D375493 • D376357 • D377345 • D377346 • D377347 • D377348 •

D388075 • D446524 • EP0256296 • EP0260155 • EP0260156 • EP0295936 • EP0325469 • EP0349770 • EP0368254 • EP0442215 •

EP0498366 • EP0531645 • EP0663643 • EP0698251 • GB2252333 • GB2284086 • GB2301691 • GB2304954 • GB2307093 • GB2308267 •

GB2308678 • GB2319103 • GB2333163 • GB2343079 • GB2344486 • GB2345568 • GB2354340 • ISR107546 • ISR118507 • ISR118508 •

JP1962823 • JP1971216 • JP2513442 • JP2732459 • JP2829331 • JP2953593 • JP2964278 • MEX185552 • MEX187245 • RE37166 • Other

Patents Pending

Quick Reference Guide i

DATALOGIC SCANNING, INC. MAGELLAN

END USER LICENSE

AGREEMENT

Notice to End User: The Datalogic Product you have acquired contains embedded Software, which is integral to the product's operation. This

Software is being provided to you under license, subject to the terms and conditions of this Agreement. If you use the Datalogic Product, you will

be deemed to have accepted the terms and conditions of this Agreement. If you do not intend to be bound to the terms of this Agreement, Data-

logic is not willing to license the Software to you, you may not use the Datalogic Product or the Software, and you must contact the party from

whom you acquired the Datalogic Product for instructions.

This End User Software License Agreement ("Agreement") is a legally binding agreement governing the licensing of the Software and Documentation by Dat-

alogic,Scanning Holdings, Inc. and its subsidiaries and affiliates ("Datalogic") to the entity or person who has purchased or otherwise acquired a Datalogic

Product ("End User"). For purposes of this Agreement, any software that is associated with a separate end-user license agreement is licensed to you under

the terms of that license agreement. Datalogic and End User hereby agree as follows:

1. Definitions.

1.1 "Documentation" means materials such as user's guides, program reference guides, quick reference guides, manuals, or similar materials associated

with or related to the Datalogic Product, whether in printed, "online", or other form.

1.2 "Proprietary Information" means: (a) source code, object code, software, documentation, and any related internal design, system design, data base

design, algorithms, technology, technical data or information, implementation techniques, and trade secrets related to the Software, (b) any other trade

secrets marked appropriately or identified as proprietary or confidential, and (c) any information that End User, under the circumstances, should recog-

nize as confidential. Proprietary Information does not include any information that the receiving party can establish was (1) in the public domain, (2)

already in the receiving party's possession or rightfully known prior to receipt, (3) rightfully learned from a third party not in violation of any other's pro-

prietary rights, or (4) independently developed without access to Proprietary Information.

1.3 "Datalogic Product" means the Datalogic Magellan® 1000i series, Magellan® 1400i series, Magellan® 8100 series, Magellan® 8200 series, Magel-

lan® 8300 series, Magellan® 8400 series, Magellan® 8500 series, Magellan® 9500 series, and/or Magellan SL® series scanner and/or scanner/scale

product, including all embedded Software in and all Documentation related to such product, which has been purchased or otherwise acquired by End

User, whether obtained directly or indirectly from Datalogic.

1.4 "Software" means any software or computer programs of Datalogic or its third party licensors in machine readable form which is embedded in the Dat-

alogic Product, whether obtained directly or indirectly from Datalogic, including any replacement, update, upgrade, enhancement or modification.

2. Scope Of License Granted.

2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license to use the Software, solely on the Datalogic Product in which it is

embedded ("designated Datalogic Product"), in machine-readable form only, solely for End User's internal business purposes. This Agreement does

not convey ownership of the Software to End User. Title to the Software shall be and remain with Datalogic or the third party from whom Datalogic has

obtained a licensed right. As used in this Agreement, the term "purchase" or its equivalents when applied to the Software shall mean "acquire under

license." End User is not entitled to receipt or use of the source code to any Software.

2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise reproduce or remanufacture the Software, whether modified

or unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Software to any other person or organization, for pur-

poses other than as expressly provided in this Agreement, without Datalogic's prior written consent.

3. Transfers, Support.

3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer, or other use of the Software on other than the desig-

nated Datalogic Product will be a material breach of this Agreement. However, Datalogic may elect not to terminate this Agreement or the granted

licenses, but instead may elect to notify End User that End User is deemed to have ordered and accepted a license for each breaching use. End User

shall pay Datalogic the applicable list price for such licenses as of the date of such breach.

3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Datalogic Product to any third party unless such third

party agrees with Datalogic in writing to be bound by the terms and conditions of this Agreement. Any such transfer of the Datalogic Product absent

such agreement shall be null and void.

3.3 End User may obtain support for Software from Datalogic at Datalogic's standard support fees and under Datalogic's standard support terms and con-

ditions in effect at the time the support is requested.

4. Intellectual Property.

End User acknowledges that the Software constitutes valuable trade secrets of Datalogic or Datalogic's third party licensors and that the Software is pro-

tected by intellectual property laws and treaties. The license set forth in this Agreement does not transfer to End User any ownership of Datalogic's or its third

party licensors' copyrights, patents, trademarks, service marks, trade secrets, or other intellectual property rights and End User shall have no right to com-

mence any legal actions to obtain such rights. End User shall not remove, modify, or take any other action that would obscure any copyright, trademark,

patent marking, or other intellectual property notices contained in or on the Datalogic Product.

5. Proprietary Information.

5.1 End User acknowledges that Proprietary Information is the confidential, proprietary, and trade secret property of Datalogic and Datalogic's third party

licensors and End User acquires no right or interest in any Proprietary Information.

5.2 End User shall not disclose, provide, or otherwise make available the Proprietary Information of Datalogic or its third party licensors to any person

other than End User's authorized employees or agents who are under confidentiality agreement, and End User shall not use the Proprietary Informa-

tion other than in conjunction with use of the Datalogic Product exclusively for End User's internal business purposes. End User shall take steps to

protect the Proprietary Information no less securely than if it were End User's own intellectual property.

5.3 The provisions of this Proprietary Information Section shall survive and continue for five (5) years after the termination of this Agreement.

6. Limited Warranty.

6.1 Datalogic warrants that, under normal use and operation, the Datalogic Product will conform substantially to the applicable Documentation for the

period specified in the Documentation. During this period, for all reproducible nonconformities for which Datalogic has been given written notice, Data-

logic will use commercially reasonable efforts to remedy nonconformities verified by Datalogic. End User agrees to supply Datalogic with all reasonably

ii Magellan

2300HS/2300HSΩ

requested information and assistance necessary to help Datalogic in remedying such nonconformities. For all defects reported to Datalogic within the

warranty period, Datalogic's liability is limited to providing End User with one copy of corrections or responding to End User's problem reports accord-

ing to Datalogic's standard assistance practices. Datalogic does not warrant that the product will meet End User's requirements or that use of the prod-

uct will be uninterrupted or error free, or that Datalogic's remedial efforts will correct any nonconformance. This limited warranty does not cover any

product that has been subjected to damage or abuse, whether intentionally, accidentally, or by neglect, or to unauthorized repair or unauthorized instal-

lation, and shall be void if End User modifies the product, uses the product in any manner other than as established in the Documentation, or if End

User breaches any of the provisions of this Agreement.

6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PROVIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES

OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

7. Infringement.

7.1 Datalogic will defend End User against any claim in a lawsuit that the Datalogic Product furnished hereunder infringe a United States patent or copy-

right of a third party and Datalogic will pay any damages finally awarded against End User by a court of competent jurisdiction that are attributable to

such claim or will pay End User's part of any settlement that is attributable to such claim, provided, that 1) End User notifies Datalogic promptly in writ-

ing of the claim, 2) Datalogic controls the defense or settlement of the claim, and 3) End User cooperates fully with Datalogic in such defense or settle-

ment. All notices of a claim should be sent to Datalogic Scanning Holdings, Inc., Legal Department, 959 Terry Street, Eugene, OR 97402.

7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1) procure for End User the right to continue using the Datalogic Product,

2) modify the Datalogic Product so that it becomes non-infringing, 3) replace the Datalogic Product with an equivalent product not subject to such

claim, or 4) provide End User an opportunity to return the Datalogic Product and receive a refund of the purchase price paid, less a reasonable allow-

ance for use.

7.3 Datalogic shall have no liability to End User for claims of infringement based upon 1) the use of any Datalogic Product in combination with any product

which Datalogic has not either furnished or authorized for use with such Datalogic Product 2) the use of any Datalogic Product designed, manufac-

tured, or modified to the specifications of End User, or 3) End User's modification of the Datalogic Product without written authorization from Datalogic.

7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER

INTELLECTUAL PROPERTY INFRINGEMENT, CANCELS AND SUPERSEDES ANY PRIOR AGREEMENTS, WHETHER ORAL OR WRITTEN,

BETWEEN THE PARTIES CONCERNING SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CONTEMPORANEOUS,

OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PARTIES, WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE

WRITING SIGNED BY BOTH PARTIES.

8. Limitation Of Liability.

EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS AGAINST END USER BY ANY OTHER PARTY. IN NO

EVENT SHALL DATALOGIC'S LIABILITY FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE), PROD-

UCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATALOGIC

PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO END USER OR ANY THIRD PARTY FOR LOST PROFITS, LOST DATA,

INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE,

EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

9. Government Restricted Rights; International Use.

9.1 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions for computer software developed at private

expense as set forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical Data and Computer

Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.

9.2 If End User is using the Datalogic Product outside of the United States, End User must comply with the applicable local laws of the country in which the

Datalogic Product is used, with U.S. export control laws, and with the English language version of this Agreement. The provisions of the "United

Nations Convention on International Sale of Goods" shall not apply to this Agreement.

10. Termination.

10.1 Either party may terminate this Agreement or any license granted under this Agreement at any time upon written notice if the other party breaches any

provision of this Agreement.

10.2 Upon termination of this Agreement, End User immediately shall cease using any non-embedded software and shall return to Datalogic or destroy all

non-embedded software covered by this Agreement, and shall furnish Datalogic with a certificate of compliance with this provision signed by an officer

or authorized representative of End User. For embedded software, End User agrees to sign a waiver prepared by Datalogic concerning further use of

the embedded Software. End User's resumed or continued use of the embedded Software after termination shall constitute End User's agreement to

be bound by the terms and conditions of this Agreement for such use.

11. General Provisions.

11.1 Entire Agreement; Amendment

. This document contains the entire agreement between the parties relating to the licensing of the Software and super-

sedes all prior or contemporaneous agreements, written or oral, between the parties concerning the licensing of the Software. This Agreement may not

be changed, amended, or modified except by written document signed by Datalogic.

11.2 Notice

. All notices required or authorized under this Agreement shall be given in writing, and shall be effective when received, with evidence of receipt.

Notices to Datalogic shall be sent to the attention of Contract Administration, Datalogic Scanning Holdings, Inc., 959 Terry Street, Eugene, OR 97402,

or such other address as may be specified by Datalogic in writing.

11.3 Waiver. A party's failure to enforce any of the terms and conditions of this Agreement shall not prevent the party's later enforcement of such terms and

conditions.

11.4 Governing Law; Venue: This Agreement and the rights of the parties hereunder shall be governed by and construed in accordance with the laws of the

State of Oregon U.S.A, without regard to the rules governing conflicts of law. The state or federal courts of the State of Oregon located in either Mult-

nomah or Lane counties shall have exclusive jurisdiction over all matters regarding this Agreement, except that Datalogic shall have the right, at its

absolute discretion, to initiate proceedings in the courts of any other state, country, or territory in which End User resides, or in which any of End User's

assets are located.

11.5 Attorneys’ Fees. In the event an action is brought to enforce the terms and conditions of this Agreement, the prevailing party shall be entitled to reason-

able attorneys' fees, both at trial and on appeal.

- END -

Quick Reference Guide iii

CONTENTS

English .......................................................................................................................................1

Francais .....................................................................................................................................5

Deutsch ......................................................................................................................................9

Italiano .....................................................................................................................................13

Español ....................................................................................................................................17

Portugues ................................................................................................................................21

Chinese ....................................................................................................................................25

Appendix A — Product Labeling ...........................................................................................29

Appendix B — Productivity Index Reporting Option ..........................................................30

Appendix C — Laser Safety ...................................................................................................32

Appendix D — Warranty .........................................................................................................38

iv Magellan

8500/8500

NOTES

Quick Reference Guide 1

Quick Reference Guide

Introduction

This guide offers a summary of basic scanner operation for first time users. Install-

ers, system managers and other technical personnel can find installation, program-

ming and further advanced information in the Product Reference Guide. Up-to-

date revisions of publications can be viewed, printed and downloaded from the

website listed on the back cover of this manual. Printed manuals can also be

ordered from your dealer/distributor.

Connection

For your convenience, Figure 1 shows scanner connections and their functions.

Figure 1. Connections

POS TERMINAL AUXILIARY PORT POWER

Connection to this port is Optional

· DC Brick Input· Label Data

· Application Download

(where appropriate)

· Test Port

· On Screen

Programming (OSP)

· Application Download

· RS-232 Handheld Scanner Input

· Auxiliary RS-232 Label Data Output

EAS Connection

Connection to this port is Optional

· Electronic Article Surveillance

Connection

Power

EAS Opening

Aux. PortScanner Host

2 Magellan

2300HS/2300HSΩ

Operation

Scanning Items

The scanner is mounted so its scan window is flush with the countertop. This

allows for maximum working space, and also permits the user to slide items over its

surface without having to grasp or pick them up. Bar codes are effortlessly scanned

when swept through the zone projected from the substantial scan window as

shown in

Figure 2a.

With FirstStrike

decoding software, the scanner can read most hard-to-read

codes quickly and without excess orientation.

Figure 2. Operating the Scanner

NOTE

Facing bar code labels in the direction of scanning, or toward the scan

window will optimize the scan rate. The arrow on the scanner’s top

cover indicates the direction scanned items should be moved (see

Figure 2b).

canne

Item

Bar

Code

Items are

pushed or

slid past

scanner

oduct

Flow

Scan Volume

reen LE

Volume

Tone Push Butto

Quick Reference Guide 3

Volume/Tone Push Button

The Volume/Tone Push Button (Figure 2d — accessed by removing the Top

Cover

Figure 2c) also performs multiple functions depending upon the duration

of time it is pressed:

NOTE

Volume changes made using the Volume/Tone Push Button are lost

when the scanner is powered-down and are reset to the configured set-

ting. If you wish to permanently change the volume, use the special

programming labels in the Product Reference Guide.

Table 1. Volume/Tone Push Button Functions

PRESS

DURATION

FUNCTION COMMENT

Momentary (when

scanner is asleep)

Wakes scanner from Sleep

Mode

Alternatively, the scanner can be awakened by:

- Moving an object through the scan zone.

- Scanning with an attached auxiliary scanner.

Momentary (when

scanner is awake)

Increments volume

Press the push button momentarily to increase speaker vol-

ume. When the loudest volume is reached, a repeated press

of the push button cycles volume back to the lowest setting,

then volume increases on subsequent press(es). Four volume

levels are available.

Hold, then release

when the beeper

sounds

Increments tone

Press the push button for approximately 2 seconds, then

release. Each time this is done, the beeper will sound at one

of three tones. Stop when the desired tone (high, medium or

low) is sounded.

4 Seconds

Scanner Diagnostics Mode

This mode allows system support personnel to troubleshoot

problems with the scanner and is used to determine if it can

read bar codes. Press the button for eight seconds or cycle

power to exit Scanner Diagnostics Mode and reset the scan-

ner.

8 Seconds

Resets Scanner

Only system support personnel should perform a reset.

a. By standard default, this function is normally disabled to prevent accidental activation by users.

b. Users should not perform scanner resets except under the direction of trained systems support person-

nel.

4 Magellan

2300HS/2300HSΩ

Green LED Indicator

The green LED (Figure 2d) indicates scanner status as shown in the table below.

Table 2. Green LED Indications

LED

INDICATION

DURATION COMMENT

Scanner Active

(Normal Mode)

Scanner (Green) LED on steady and dim

The scanner is ready for operation. Scanning is immedi-

ately available.

Good Read Indi-

cation

Scanner (Green) LED - bright flash

Indicates a bar code has been read and decoded.

Program Mode

Indication

Scanner (Green) LED - Continuous flash-

ing

Indicates the scanner is in Label Programming Mode.

Cycle power to exit Programming Mode.

Sleep Mode Indi-

cation

Scanner (Green) LED flashes slowly

The scanner motor and/or laser have automatically

switched off and the unit has entered Sleep Mode due

to extended inactivity.

Host Disabled

Scanner (Green) LED 1-second off, 1/10-

second on

Host has disabled scanning.

Field Replace-

able Unit (FRU)

Warning (Error

Mode)

Audible low tone 1 second. LED flashes

continuously.

Serves notice that a fatal FRU failure has been

detected. Call systems support for service.

FRU Indication

Scanner (Green) LED flashes a coded

sequence in concert with the speaker.

Occurs ONLY upon Volume/Tone button push following

a FRU warning. Enables service technicians to identify

FRU failures.

a. Certain functions of the LED are selectable to be enabled or disabled. Your scanner may not be pro-

grammed to display all indications.

Quick Reference Guide 5

Introduction

Ce guide présente une synthèse du fonctionnement de base du scanner à l'atten-

tion des utilisateurs novices. Les installateurs, les administrateurs de système et

autres personnels techniques pourront obtenir des informations sur l'installation,

la programmation ainsi que d'autres indications plus avancées dans le Guide de

référence du produit. Il est possible de consulter, d'imprimer et télécharger des

mises à jour des publications à partir du site de Datalogic à l'adresse reportée sur la

couverture postérieure de ce manuel. Il est également possible de commander des

manuels imprimés auprès de votre vendeur/distributeur.

Raccordement

Pour vous aider, consulter la Figure 3 qui illustre les raccordements et les fonctions

du scanner

Figure 3. Raccordement

Port auxiliaire Alimentation

Le raccordement à ce port est

facultatif

· Entrée Brick CC

· Données étiquette

· Téléchargement de

l'application (le cas

échéant)

· Port d'essai

· Affichage de la programmation (OSP)

· Téléchargement de l'application

· Entrée scanner à main RS-232

· Sortie auxiliaire RS-232 données

étiquette

Raccordement EAS

Le raccordement à ce port est

facultatif

· Système de surveillance

électronique d'articles (EAS)

Raccordement

Power

EAS Opening

Aux. PortScanner Host

Terminal

d'encaissement (POS)

6 Magellan

2300HS/2300HSΩ

Fonctionnement

Lecture d’articles

Le scanner est installé de manière à positionner sa fenêtre de lecture au même

niveau que le comptoir. Cette procédure permet d'obtenir un espace de travail

maximum et permet à l'utilisateur de faire glisser les articles sur la surface sans

devoir les saisir ou les soulever. Les codes à barres sont numérisés sans aucun effort

lorsqu'ils sont passés à travers la zone projetée à partir de la grande fenêtre de lec-

ture illustrée à la

Figure 4a.

Grâce au logiciel de décodage FirstStrike™, le scanner peut capturer rapidement et

avec une orientation minime la plupart des codes de lecture difficile.

Figure 4. Mode de lecture " Transfert " et " Présentation "

NOTA

La position en face des étiquettes des codes à barres dans la direction

de lecture ou face à la fenêtre de lecture optimisera le taux de lectures

réussies. La flèche présente sur le couvercle supérieur du scanner

indique la direction de déplacement à suivre pour numériser les arti-

cles (voir Figure 4b).

canne

irculatio

des produits

Volume

de lecture

ant DEL ver

Bouton-

oussoir volume/tonali

Code

à barres

de l'article

Les articles

sont poussés

ou glissés

devant le

scanner

Quick Reference Guide 7

Bouton-poussoir volume/tonalité

Le bouton-poussoir volume/tonalité exécute également des fonctions

multiples selon la durée de son activation :

NOTA

Les changements de volume rendent l'utilisation du Bouton de réglage

du Volume/Tonalité difficile lorsque le scanner est hors tension et est

réinitiliasé au paramètre configuré. Si vous désirez changer définitive-

ment le volume, utilisez les étiquettes spéciales de programmation

dans le Guide de référence du produit.

Tableau 3. Fonctions du bouton-poussoir Volume/tonalité

DURÉE

D'ACTIVATION

FONCTION COMMENTAIRE

Momentané (lorsque

le scanner est en

mode de veille)

Réveille le scanner du mode de

veille

En alternative, le scanner peut être réveillé par :

- déplacement d'un objet à travers la zone de balayage.

- un changement de poids sur la balance.

- Lecture avec un scanner auxiliaire attaché

Momentané (lorsque

le scanner est en

mode d'éveil)

Augmente le volume

Pressez le bouton-poussoir momentanément pour augmenter

le volume du haut-parleur. Après avoir atteint le volume le

plus élevé, une pression répétée du bouton-poussoir reporte

progressivement le volume au niveau le plus bas, le volume

augmente ensuite en fonction des pressions successives.

Cinq niveaux de volume sont disponibles.

Maintenez la touche

enfoncée et relâchez-

la lorsque l'avertis-

seur sonore retentit

Augmente la tonalité

Pressez le bouton-poussoir pendant approximativement 2

secondes, puis relâchez. A chaque pression, l'avertisseur

retentira selon une des trois tonalités. Arrêtez lorsque la

tonalité désirée (élevée, moyenne ou faible) est obtenue.

4 secondes

Mode de diagnostic du scan-

ner

Ce mode permet au personnel chargé de l'assistance du

système de remédier aux problèmes du scanner. Les diag-

nostics sont généralement lancés après la notification d'une

alarme du module interchangeable (voir Tableau 1).

Débranchez et rebranchez l'alimentation pour sortir du mode

diagnostic.

8 secondes

Remet le scanner à l'état initia

Seul le personnel chargé de l'assistance du système est

autorisé à exécuter la remise à l'état initial.

a. Par défaut, cette fonction est neutralisée pour empêcher l'activation accidentelle par des utilisateurs.

b. Les utilisateurs ne devraient pas procéder à la remise à l'état initial du scanner sauf sous la direction de

personnel agréé chargé de l'assistance des systèmes.

8 Magellan

2300HS/2300HSΩ

Fonctions des voyant DEL Vert

Le voyant DEL vert (Figure 4d) indique l'état du scanner au Tableau 4 ci-des-

sous.

Tableau 4. Green LED Indications

LED

INDICATION

DURATION COMMENT

Scanner Actif

(Mode normal)

Voyant DEL vert en mode veille fixe

Le scanner est prêt à fonctionner. Le balayage est

immédiatement disponible.

Lecture correcte

de l'indication

Voyant DEL vert - clignotement lumineux

Indique la lecture et le décodage du code à barres.

Indication du

mode programme

Voyant DEL vert - Clignotement continu

Indique que le scanner est en mode de programmation

Étiquette. Débranchez et rebranchez l'alimentation pour

sortir du mode de programmation.

Indication du

mode de veille

Le voyant DEL vert clignote lentement

Le moteur du scanner et/ou le laser sont mis automa-

tiquement hors tension et l'unité passe en mode de

veille à cause de l'inactivité prolongée.

Système invalide

1 seconde éteint, 1/10è de seconde

allumé

Système invalide scanner.

Alarme de mod-

ule interchange-

able(Mode

d'erreur)

Signal sonore bas 1 seconde. Voyant DEL

vert/jaune alternatif clignote de manière

continue.

Indique qu'une erreur fatale du module interchangeable

a été détectée.

Indication de

module inter-

changeable

Le voyant DEL vert clignote selon une

séquence codée en combinaison avec le

haut-parleur.

UNIQUEMENT au cas où le bouton Volume/tonalité

serait activé suite à une alarme d’un module inter-

changeable. Ceci permet aux techniciens d'identifier les

défaillances du module interchangeable.

a. Il est possible de sélectionner certaines fonctions des voyants DEL vert et jaune afin de les activer ou

désactiver. Il n'est pas possible de programmer votre scanner pour afficher toutes les indications.

Quick Reference Guide 9

Einleitung

Diese Anleitung bietet eine Zusammenfassung der grundlegenden Scanner-Bedie-

nung für neue Benutzer. Systemmanager, Installations- und anderes technisches

Personal finden Informationen zu Installation, Programmierung und weitere Ang-

aben im Produktreferenzhandbuch. Aktuelle Änderungen der Publikationen fin-

den Sie auf der Datalogic-Homepage; diese können Sie drucken und

herunterladen. Die Internet-Adresse finden Sie auf der Rückseite dieses Hand-

buchs. Gedruckte Handbücher können Sie auch bei Ihrem Händler/Vertreter

bestellen.

Anschliessen

Abbildung 5 zeigt die Scanner-Anschlüsse und ihre Funktionen.

Abbildung 5. Anschlüsse

POS-Terminal Zusätzlicher Port Stromversorgung

Anschluß an diesen Port ist optional

· Gleichstrom-

Brickeingang

· Kennsatzdaten

· Applikations-Download

(falls zutreffend)

· Test-Port

· On Screen Programming (OSP)

· Applikations-Download

· Eingang für RS-232 Handheld Scanner

· Zusätzlicher RS-232 Kennsatz-

Datenausgang

EAS-Anschluß

Anschluß an diesen Port ist optional

· Elektronische Artikelüberwachung

(EAS) Anschluß

Power

EAS Opening

Aux. PortScanner Host

10 Magellan

2300HS/2300HSΩ

Bedienung

Scannen von Produkten

Der Scanner wird so installiert, dass das Scanfenster mit der Ladentheke bündig

ist. So erhält man eine maximale Arbeitsfläche, und der Benutzer kann die Artikel

über diese Oberfläche schieben, ohne sie greifen oder aufheben zu müssen. Bar-

codes werden leicht gescannt, wenn sie durch die von dem großen Scanfenster pro-

jizierte Zone bewegt werden (siehe

Abbildung 6a).

Mit Hilfe der FirstStrikeTM Decodierungssoftware kann der Scanner die meisten

schwer lesbaren Codes schnell und ohne übermäßige Ausrichtung lesen.

Abbildung 6. Bedienung des Scanner

BEACHTEN SIE

Ausrichten der Barcode-Aufkleber in Scanrichtung oder zum Scanfen-

ster erhöht die Scanrate. Der Pfeil auf der oberen Abdeckung des

Scanners zeigt die Richtung an, in der die Artikel bewegt werden

sollten (siehe Abbildung 6b).

canne

Artikel werden

an dem Scanner

vorbeigeschoben

nfl

Scan-Volumen

rke

Tonschalte

Artikel-

Barcode

Quick Reference Guide 11

Lautstärke/Tonschalter

BEACHTEN SIE

Änderungen der Lautstärke, die über die Drucktaste "Volume/Tone"

erfolgt sind, werden beim Herunterfahren des Scanners gelöscht, und

es erfolgt ein Zurücksetzen auf die Werkseinstellungen. Eine dauer-

hafte Änderung der Lautstärke kann mit Hilfe der speziellen Program-

mierkenndaten im Produktreferenzhandbuch vorgenommen werden.

Tabelle 5. Lautstärke/Tonschalter-Funktionen

Betätigungsdauer Funktion Bemerkung

kurz (wenn der Scan-

ner im Bereitschafts-

modus ist)

versetzt den Scanner vom Bereit-

schafts- in den Betriebsmodus

Der Scanner kann in den Bereitschaftsmodus versetzt wer-

den entweder durch:

- Bewegen eines Objektes durch den Scanbereich

- eine Gewichtsänderung auf der Waage

- Scannen mit einem extern angeschlossenen Handscanner

kurz (wenn sich der

Scanner im Betriebs-

modus befindet)

Erhöhung der Lautstärke

Durch kurzzeitiges Betätigen des Schalters wird die

Lautstärke erhöht. Wenn die höchste Stufe erreicht ist, wird

durch erneutes Betätigen die Lautstärke auf die niedrigste

Stufe zurückgesetzt. Danach steigt die Lautstärke wieder an.

Fünf Lautstärken können eingestellt werden.

Halten und beim

Hören des Signals

Erhöhung der Tonhöhe

Betätigen Sie den Schalter für ca. 2 Sekunden und lassen Sie

ihn dann los. Dadurch können die drei möglichen Tonhöhen

(hoch, mittel und tief) eingestellt werden.

4 Sekunden

Scannerdiagnosemodus

Dieser Modus erlaubt dem technischen Personal die Identi-

fikation von Problemen, die beim Scanner aufgetreten sind.

Drücken Sie den Schalter für 8 Sekunden oder schalten Sie

zum Verlassen des Scannerdiagnosemodus' den Scanner

aus und ein und starten den Scanner neu.

8 Sekunden

Scanner-Reset

Nur das technische Personal sollte einen Reset durchführen.

a. In der Standardeinstellung ist diese Funktion ausgeschaltet, um versehentliche Aktivierung durch den

Benutzer vorzubeugen.

b. Anwender sollten keinen Scanner-Reset durchführen außer unter der Anweisung ausgebildeten Servi-

cepersonals.

12 Magellan

2300HS/2300HSΩ

Grüne LED Funktionen

Tabelle 6. Grüne LED Funktionen

LED Anzeige Dauer Bemerkung

Scanner ist aktiv

(Normalmodus)

a. Bestimmte LED-Funktionen können wahlweise aktiviert oder deaktiviert werden.

Die Grüne Anzeige ist dauerhaft an und

leuchtet schwach

Der Scanner ist betriebsbereit. Scannen ist sofort

möglich.

Optisches Sig-

nal, das erfolg-

reiches

Scannen anzeigt

Grüne Anzeige - helles Aufblinken

Zeigt das erfolgreiche Lesen und Decodieren eines Bar-

codes an.

Programmier-

modusanzeige

Grüne Anzeige - wiederholtes Blinken

Zeigt an, daß sich der Scanner im Barcode-Program-

miermodus befindet. Zum Verlassen des Programmier-

modus schalten Sie aus und ein.

Bereitschafts-

modusanzeige

Die grüne LED-Anzeige blinkt im 2-

Sekunden-Takt.

Der Scanner- oder Lasermotor hat sich nach längerer

Nichtbenutzung automatisch abgeschaltet und ist in den

Bereitschaftsmodus übergegangen..

Host außer

Betrieb

1 Sekunde aus, eine zehntel Sekunde an

Host ermöglicht kein Scannen.

Hardwarefehler-

warnung (Fehler-

modus)

Akustischer tiefer Ton 1 Sekunde und die

grüne/gelbe Anzeige blinkt fortwährend

Zeigt an, daß ein schwerer Hardwarefehler entdeckt

wurde.

Hardwarefehler-

Anzeige (Fehler-

Modus)

Grüne Anzeige blinkt in einer kodierten

Sequenz zusammen mit dem Lautspre-

cher.

Tritt NUR auf, wenn der Lautstärke/Tonknopf betätigt

wurde und eine Hardwarefehlerwarnung auftritt. Diese

Anzeige ermöglicht dem Techniker, den Hardwarefehler

zu identifizieren..

Quick Reference Guide 13

Introduzione

Questa guida offre un sommario delle operazioni principali dello scanner per

utenti inesperti. Installatori, amministratori di sistema e altro personale tecnico

possono trovare informazioni sull'installazione, programmazione ed altre questioni

avanzate nella guida di riferimento del prodotto. Revisioni aggiornate delle pubbli-

cazioni possono essere visualizzate, stampate e scaricate dal sito web Datalogic indi-

cato sulla copertina posteriore di questo manuale. È possibile anche ordinare i

manuali su carta dal proprio rivenditore/distributore.

Connessione

Per comodità, la Figura 7 mostra le connessioni dello scanner e le relative funzioni.

Figura 7. Connessioni

Terminale POS Porta ausiliaria Accensione

· Ingresso Brick CC· Dati etichetta

· Download

dell'applicazione

(dove appropriato)

· Porta di controllo

· Programmazione su schermo (OSP)

· Download applicazione

· Ingresso RS-232 per il lettore palmare

· Uscita ausiliaria RS-232 dati etichetta

Connessione EAS

La connessione su questa porta è

opzionale

La connessione su questa porta è

opzionale

· Sistemi per la sorveglianza

elettronica antitaccheggio

Connessione

Power

EAS Opening

Aux. PortScanner Host

14 Magellan

2300HS/2300HSΩ

Funzionamento

Utilizzo dello scanner

Lo scanner è montato in modo che la sua finestra di scansione si trovi sullo stesso

livello del piano di lavoro. Ciò mantiene libero il più possibile il piano di lavoro e

consente anche all'utente di spingere gli articoli sulla sua superficie senza doverli

afferrare o raccogliere. I codici a barre sono scansiti facilmente facendoli passare

nella zona di proiezione della finestra di scansione reale come mostrato in

Figura 8a.

Con il software di decodifica FirstStrike

, lo scanner può leggere anche i codici

più difficili da interpretare in modo rapido e senza bisogno di orientare eccessiva-

mente l'articolo.

Figura 8. Funzionamento dello scanner

NOTA

Affacciando le etichette con il codice a barre nella direzione della scan-

sione, o verso la finestra di scansione, si ottimizzerà la velocità di let-

tura. La freccia posta sullo schermo superiore dello scanner indica la

direzione in cui far muovere gli articoli da scansire (vedere Figura 8b).

canne

Gli articoli

sono spinti

o fatti scivolare

oltre lo scanner

Dir

del

rodott

Volume di

scansione

LED v

Tasto tono

volum

Codice

a barre

dell'articolo

Quick Reference Guide 15

Tasto tono/volume

Il tasto tono/volume svolge molteplici funzioni in base alla durata della

pressione esercitata:

NOTA

Le variazioni di volume effettuate con l'interruttore a pulsante Volume/

Tono sono annullate con lo spegnimento dello scanner e quindi

impostate nuovamente nel modo predefinito. Se si vuole modificare

permanentemente il volume, utilizzare le speciali etichette di program-

mazione illustrate nella guida di riferimento del prodotto.

Tabella 7. Funzioni del Tasto tono/volume

DURATA FUNZIONE NOTA

Momentanea (con

scanner in modalità

Sleep)

Risveglia lo scanner dalla modal-

ità Sleep

In alternativa, lo scanner può essere riattivato:

- Muovendo un oggetto nell'area di scansione.

- Cambiando il peso sulla bilancia.

- Effettuando una scansione con uno scanner ausiliario colle-

gato

Momentanea (con

scanner operativo)

Aumenta il volume

Premere brevemente il pulsante per aumentare di un livello il

volume dell'altoparlante. Una volta raggiunto il livello

massimo, premendo nuovamente il pulsante si torna al livello

minimo di volume. Sono disponibili cinque livelli di volume.

Tenere premuto fino

all'emissione del

segnale acustico

Aumenta il tono

Tenere premuto il pulsante per circa 2 secondi, quindi rilascia-

rlo. Ogni volta che si effettua questa operazione si cambia il

tono con cui viene emesso il segnale acustico. Ripetere

l'operazione fino ad impostare il tono desiderato tra quelli dis-

ponibili (alto, medio, basso).

Tenere premuto per

4 secondi

Modalità diagnostica

scanner

Questa modalità consente al personale del servizio di assis-

tenza di identificare le anomalie rilevate sullo scanner. Nor-

malmente, tale modalità viene utilizzata dopo una

segnalazione di guasto FRU (Field Replaceable Unit) (vedi

Tabella 1). Premere ripetutamente il tasto power per uscire

dalla modalità diagnostica.

Tenere premuto per

8 secondi

Reinizializzazione dello scanner

La reinizializzazione (reset) dello scanner deve essere effet-

tuata solo dal personale del servizio di assistenza.

a. Tramite i parametri standard questa funzione è normalmente disabilitata per prevenire l'attivazione acci-

dentale da parte dell'utilizzatore.

b. L'utente non deve mai effettuare la reinizializzazione dello scanner a meno che non venga esplicita-

mente richiesto dal personale del servizio di assistenza.

16 Magellan

2300HS/2300HSΩ

LED Verde

Tabella 8. Funzioni dei LED verde

SIGNIFICATO DURATA NOTA

Scanner attivoa

(Modalità nor-

male)

a. È possibile abilitare o disabilitare alcune funzioni del LED.

LED verde acceso (intensità media)

Lo scanner è pronto per l'utilizzo. Funzione di scansione

immediatamente disponibile.

Segnalazione di

corretta lettura

LED verde acceso (intensità max)

Segnala l'avvenuta lettura e decodifica di un codice a

barre.

Segnalazione

modalità pro-

grammazione

LED verde - lampeggio continuo

Segnala che lo scanner è in modalità di programmazi-

one. Premere ripetutamente il tasto power per uscire da

tale modalità.

Segnalazione

modalità Sleep

LED verde - lampeggio lento

Il motore e/o il laser dello scanner si sono spenti auto-

maticamente e l'unità è passata in modalità Sleep per

inattività prolungata.

Host disabilitata

1 secondo spento, 1/10 secondo acceso

L'host ha disabilitato la scansione.

Anomalia FRU

(Field Replace-

able Unit) (modal-

ità di errore)

Tono basso udibile della durata di 1 sec-

ondo. Lampeggio continuo e alternato del

LED verde/giallo.

Segnala che è stato rilevato un guasto critico FRU.

Indicazione FRU

Il LED verde lampeggia con una

sequenza codificata in abbinamento ad

un segnale acustic.

Si verifica SOLO quando si preme il tasto tono/volume

dopo una segnalazione FRU. Consente al tecnico

riparatore di identificare il guasto FRU.

Quick Reference Guide 17

Introducción

Esta guía presenta un resumen de la operación básica del escáner para quienes lo

utilizan por primera vez. Los instaladores, administradores de sistema y demás per-

sonal técnico pueden consultar la Guía de referencia del producto para obtener

detalles de instalación, programación y otra información avanzada. El sitio web de

Datalogic, cuya dirección figura en la contratapa de este manual, contiene difer-

entes publicaciones actualizadas al momento, que se pueden ver, imprimir y des-

cargar. También se le pueden solicitar copias de los manuales impresos en papel a

los representantes o distribuidores de Datalogic.

Conexión

Para mayor conveniencia, la Figura 9 muestra las conexiones del escáner y sus

respectivas funciones.

Figura 9. Conexiones

Terminal de

Punto de venta

Puerto auxiliar Alimentación

La conexión a este puerto es opcional

· Entrada para

corriente directa

en formato "brick"

· Datos de etiquetas

· Descarga de

aplicaciones (cuando

corresponda)

· Puerto de prueba

· Programación en pantalla (PEP)

· Descarga de aplicaciones

· Entrada RS-232 para escáner manual

· Salida auxiliar RS-232 para datos

de etiquetas

Conexión de sistema electrónico

para vigilancia de mercancías

La conexión a este puerto es opcional

· Sistema electrónico para vigilancia

de mercancías Conexión

Power

EAS Opening

Aux. PortScanner Host

18 Magellan

2300HS/2300HSΩ

Funcionamiento

Escaneo de objetos

El escáner está colocado de manera tal que la ventana de escaneado quede a nivel

del mostrador. Ello hace posible liberar el máximo espacio de trabajo disponible y

permite que el usuario deslice los productos sobre la superficie del escáner sin tener

que tomarlos ni levantarlos. Los códigos de barra se leen sin esfuerzo cuando se los

pasa por la zona que se proyecta desde la ventana principal de lectura, tal como lo

muestra la

Figura 10a.

Con el software de decodificación FirstStrike

, el escáner puede leer rápidamente

la mayoría de los códigos que son de difícil lectura, sin necesidad de maniobrar

demasiado la mercancía.

Figura 10. Operación del escáner

NOTA

Colocar las etiquetas con el código de barras en la dirección de la lec-

tura, o hacia la ventana de escaneado, optimizará el ritmo del proceso.

La flecha que aparece en la tapa superior del escáner indica la direc-

ción en que se deben pasar los productos que se deseen escanear (ver

Figura 2b).

Escáner

Se pasan o

se deslizan

las mercancías

frente al escáner

Flu

o d

roducto

Cam

o d

lectura

Indicador luminoso verde

Botón pulsador Tono/Volumen

Código

de barra

del producto

Quick Reference Guide 19

Botón pulsador Tono/Volumen

NOTA

Los cambios realizados en el volumen mediante el botón pulsador

para Volumen / Tono se pierden cuando se apaga el escáner y, cuando

se lo vuelve a encender, se recuperan los valores preestablecidos. Si

usted desea modificar el volumen de modo permanente, emplee las

etiquetas de programación especial que figuran en la Guía de referen-

cia del producto.

Tabla 9. Funciones del Botón pulsador Volumen/Tono

PRESIÓN DEL

BOTÓN

FUNCIÓN COMENTARIO

Momentánea (cuando

el escáner está en

Modo de ahorro de

energía)

Despierta al escáner del Modo

de ahorro de energía

También se puede despertar el escáner:

-Moviendo un objeto a través de la zona de escaneo.

-Pesando un artículo en la balanza.

-Escaneando con un escáner auxiliar conectado a este

escáner

Momentánea (cuando

el escáner está activo)

Incrementa el volumen

Presione el botón pulsador momentáneamente para aumen-

tar el volumen del parlante. Una vez alcanzado el volumen

máximo, volverá a oírse el volumen más bajo cuando se pre-

sione el botón otra vez, y luego el volumen irá subiendo con

cada pulsación del botón. Hay cinco niveles de volumen.

Mantener el botón

presionado y luego

soltarlo cuando se

escucha el tono

Aumenta el tono

Presione el botón pulsador durante aproximadamente 2 seg-

undos y luego suéltelo. Cada vez que haga esto, se oirán

diferentes tonos (alto, medio o bajo). Deténgase cuando haya

oído el tono deseado.

4 segundos

Modo de diagnóstico del

escáner

a. Por default, esta función es deshabilitada para prevenir activación accidental por el usuario.

ste modo le permite al personal de mantenimiento del

sistema identificar los problemas que pudiese tener el

escáner. Por lo general, el diagnóstico se inicia cuando se ha

detectado una advertencia FRU (Unidad reemplazable de

campo) (vea la Tabla 1). Presione el botón de encendido para

salir del Modo de diagnóstico del escáner.

8 segundos

Reinicia el escáner

b. Los usuarios no deberían reiniciar el escáner a menos que se reciba tal instrucción del personal capac-

itado en mantenimiento del sistema.

Esta operación debería ser realizada sólo por personal de

mantenimiento del sistema.

20 Magellan

2300HS/2300HSΩ

Funciones de el indicador luminoso verde

Tabla 10. Funciones de el indicador luminoso verde

SIGNIFICADO

DEL

INDICADOR

DURACIÓN COMENTARIO

Escáner activo

(Modo normal)

a. Algunas funciones del indicador luminoso son opcionales, por lo que se pueden activar o desactivar.

Indicador luminoso verde constante y

tenue

El escáner está listo para operar. Se puede escanear

inmediatamente.

Lectura correcta

Indicador luminoso verde con parpadeo

brillante

Indica que se ha leído y decodificado un código de bar-

ras.

Modo de

programación

Indicador luminoso verde con parpadeo

continuo

Indica que el escáner se encuentra en Modo de progra-

mación de etiqueta. Presione el botón de encendido

para salir del Modo de programación.

Modo de ahorro

de energía

Indicador luminoso verde con parpadeo

lento

El motor del escáner y/o el láser se apagaron de man-

era automática y la unidad ingresó en el Modo de

ahorro de energía debido a que ha estado inactiva

durante un período extenso.

Ter mina l

incapacitado

1 segundo apagado, 1/10 segundos pren-

dido

Terminal tiene lector incapacitador.

Advertencia de

Unidad reem-

plazable de

campo (FRU, en

inglés) (Modo de

error)

Tono audible bajo 1 segundo. Los indica-

dores luminosos verde y amarillo par-

padean continuamente en forma

alternada.

Indica que se ha detectado una falla FRU fatal.

Unidad reem-

plazable de

campo, FRU

El indicador luminoso verde parpadea

siguiendo una secuencia codificada en

forma conjunta con el parlante.

Ocurre SÓLO si se presiona el botón de Volumen/Tono

después de haberse recibido una advertencia de error

FRU. Permite a los técnicos identificar las fallas FRU.

Quick Reference Guide 21

Introdução

Esta guia oferece um sumário de operações básicas do leitor para principiantes.O

Instalador, administradores de sistema e outro pessoal técnico podem encontar

programação, instalação, e informações avançadas adicionais no Guia de Referên-

cia do Produto.

Revisões atualizadas das publicações podem ser visualizadas, impressas e baixadas

(download) do website da Datalogic, que está escrito atrás da capa deste manual.

Manuais impressos podem também ser requisitados ao seu revendedor/distri-

buidor.

Conexão

Para a sua comodidade a Figura 11 mostra as conexões do scarnner e as suas

funções.

Figura 11. Conexões

Terminal POS Porta Auxiliar Energia

Conexão com esta porta é opcional

· Entrada de

Energia C.C.

· Legenda dos Dados

· Uso do Download

(onde apropriada)

· Porta de Teste

· Programação (OSP)

· Uso do Download

· Entrada RS-232 para pistolas

· Saída Auxiliar RS-232 Informações

de Leitura

Conexão EAS

Conexão com esta porta é opcional

· Conexão para o sistema de

Vigilância Eletrônica de Artigos

Power

EAS Opening

Aux. PortScanner Host

22 Magellan

2300HS/2300HSΩ

Operação

Para usar seu leitor

O leitor está inserido no balcão, desta forma a sua janela de leitura abrange a área

de trabalho. Isto permite um máximo espaço de trabalho, e também permite ao

usuário deslizar os artigos, sobre a sua superfície,sem ter que pegá-los ou levantá-

los. Os códigos de barras são lidos sem esforço quando passados pela zona pro-

jetada na janela de leitura, conforme indicado na

Figura 12a.

Com o programa de decodificação FirstStrike

, o leitor pode ler mais rapida-

mente os códigos difíceis de se ler e sem excessiva orientação

Figura 12. Uso do Leitor

Observação

Colocando as etiquetas com os códigos de barra para cima,na direção

do leitor, ou em direção da janela de leitura se otimiza o ritmo de leit-

ura. A flecha localizada na tampa do leitor indica a direção na qual

deve mover os artigos (ver Figura 12b).

Os artigos

são deslizados

ou empurrados

perto do scanner

produto

Volume

LED v

o de Volume

Tonalidad

Código

de Barras

do Artigo

Quick Reference Guide 23

Botão de Volume/Tonalidade

O Botão de Volume/Tonalidade também executa multíplas funções, depen-

dendo da duração que o mesmo foi pressionado:

Observação

As mudanças de intensidade feitas usando o Botão de Volume/Tonal-

idade são perdidas quando o leitor é desligado e volta para config-

uração de instalação. Se você deseja mudar o volume de forma

permanente, use as etiquetas de programação da Guia de Referência

do Produto.

Tabella 11. Funções do Botão de Volume/Tonalidade

PRESSÃO NO

BOTÃO

FUNÇÃO OBSERVAÇÃO

Momentária (quando

o leitor está em

repouso)

Retira o leitor do Modo de

Repouso

Alternativamente, o leitor pode ser desperto por:

- Passando algum objecto pela zona de leitura.

- Uma troca de peso na balança.

- Fazendo uma leitura com uma pistola auxiliar conectada ao

leitor.

Momentária (quando

o leitor está ativo)

Incrementa o volume

Pressione momentáriamente o botão para aumentar o vol-

ume do alto-falante. Qunado o volume mais alto for alca-

nçado, pressionando o botão irá retornar o volume para o

nível mais baixo, aumentando a cada pressão no botão.

Cinco níveis de volume estão disponíveis.

Aperte, e depois solte

quando emitir o sinal

sonoro

Incrementa o Tom

Pressione o botão por aproximadamente 2 segundos e

depois solte. Cda vez que isto é efetuado, emitirá um sinal

sonoro em um dos três tons. Pare quando tiver o tom dese-

jado (alto, médio, baixo).

4 Segundos

Modo de Diagnóstico da Leitor

Este modo permite que o pessoal da assistência técnica

possa detectar problemas com a balança. Pressione o botão

por 8 segundos, ou desligue/ligue a energia para sair do

Modo de Diagnóstico do Leitor e reinicializar o leitor.

8 Segundos

Reinicializa o Leitorr

Sómente pessoal da assistência técnica deve executar a rein-

icialização.

a. Pelo default de fábrica, esta função está normalmente desabilitada de forma a prevenir uma acidental

ativação pelos usuários..

b. Usuários não devem executar a reinicialização do leitor, excepto sob instruções por pessoal treinado da

assistência técnica.

24 Magellan

2300HS/2300HSΩ

Funções do LED Verde

Tabella 12. Funções do LED Verde

INDICAÇÃO DURAÇÃO OBSERVAÇÃO

Leitor Ativo

(Modo Normal)

a. Algumas funções do LED podem ser selecionadas para serem habilitadas ou desabilitadas.

LED Verde aceso e meio-aceso

O leitor está pronto para ser operado. Leitura está dis-

ponível de imediato.

Indicação de Boa

Leitura

LED Verde - piscando forte

Indica a leitura de um código de barras e sua decodifi-

cação.

Indicação de

Modo de Progra-

mação

LED Verde - pisca continuamente

Indica que o leitor está em Modo de Programação por

Etiquetas. Reclica a energia para sair do Modo de Pro-

gramação.

Indicação de

Modo de

Repouso

LED Verde - pisca lentamente

O motor e/ou laser do leitor se apaga automaticamente

e a unidade entra em Modo de Repouso devido a um

longo período de inatividade.

Ter mina l

Desabilitado

1 segundo apagado, 1/10 de segundo

aceso

Terminal desabilitou a leitura.

Field Replace-

able Unit (FRU)

Advertên-

cia(Modo de

Erro)

Tom baixo audível 1 segundo. Pisca de

forma continua e alternada os LEDs

Verde e Amarelo

Avisa de uma falha fatal detectada em um FRU.

Indicação de FRU

LED Verde - pisca uma determinada

sequencia em conjunto com o alto-fal-

ante.

Ocorre SOMENTE pressionando o botão de Volume

depois que recebeu uma advertência de FRU. Permite

que a assistência técnica possa identificar falha no

equipamento.

快速用户指南 25

简介

该指南向第一次使用扫描器的用户概要介绍扫描器的基本操作。安装人

员、系统管理员和其他技术人员可以在《产品参考手册》中找到有关安

装、编程和更高级的信息。此手册以及该产品的其他手册在随扫描器所

带的手册 CD 中都有。有关这些出版物的最新修改可以从 Datalogic 网站

上浏览、打印和下载，该网址在本手册的封底上可以找到。您还可以从

经销商 / 分销商那里订购印刷好的手册。

连接

为了方便您了解，图 13 中介绍了扫描器连接及各部分的功能。

图 13. 连接

26 Magellan

2300HS

操作

扫描物品

扫描器是嵌入到工作台面里的且与工作台平齐，这样不仅可以节约工作

空间，用户在使用时也只需将商品在工作台上滑过 , 而不必抓拿商品或

将其拿起来。当将商品从

图 14a 中所示的扫描窗口所投射出的扫描区扫

过的时候，扫描器可以毫不费力地将条码读取。

由于采纳了 FirstStrike

解码软件，扫描器可以快速读取最难读取的

条码，且不需要更多调整物品方位。

图 14.

操作扫描器

注意

将条码标签顺着扫描方向或者对着扫描窗口可以达到最佳扫描

速度。扫描器顶盖上的箭头表示扫描商品时应当将商品移动的

方向 ( 见图 14b)。

快速用户指南 27

音量 / 音调按钮

根据按下按钮时间的不同，音量 / 音调按钮 ( 图 14d —可以通过卸下扫描

器顶盖 [

图 14c] 来操作 ) 有多项功能：

注意

当将扫描器关机后，使用音量 / 音调按钮对音量的修改会丢失，

并恢复到原来设定的状态。如果您想永久性地改变音量，请使用

《产品指南》中的特殊编程标签。

表 13. 音量 / 音调按钮的功能

按钮时间功能注解

瞬间 ( 当扫描器处于

休眠状态时 )

将扫描器唤醒

另外，还可以通过以下方式唤醒扫描器：

- 移动一件物品通过扫描区。

- 用辅助扫描器进行扫描。

瞬间 ( 当扫描器处于

活动状态时 )

提高音量

瞬间按下按钮可以提高扬声器的音量。当

扬声器到达最大音量时，继续按下按钮会

使音量回到最低，接着再按则会使音量逐

步提高。音量有 4 个等级。

按下按钮，当听到扬

声器嘟声后释放

提高音调

按下按钮大约 2 秒钟，然后释放。每次这

样做，蜂鸣器会以三种声调中的一种发出

声音。当听到想要的声调（高、中、低）

时停止按按钮。

4 秒

扫描器诊断模式

这种模式下系统支持人员可以对扫描器进

行问题诊断。按下该按钮 8 秒钟或者关机

后重新开机，可以退出扫描器诊断模式和

重新设置扫描器。

8 秒

重新设置扫描器

只有系统支持人员才能对扫描器进行重新

设置。

a. 牖玷崴叾钐趣啡昧脌观葦鞌董€啠曼潭瓈嗭虮惏箖弲天彐偠偷€粒

b. 除非有受过训练的系统支持人员的指导，用户不能对扫描器进行重新设置。

28 Magellan

2300HS

绿色指示灯

绿色指示灯 ( 图 14d) 所表示的扫描器状态如下表所列：

表 14. 绿色指示灯指示

表示内容持续时间注解

扫描器处于活

动状态

( 正常模式 )

扫描器绿色指示灯连续发光且

灯光暗淡扫描器准备就绪，可以随时工作。

读取正确 a

扫描器绿色指示灯亮闪一次

表明条码已被读取和解码。

编程模式

扫描器绿色指示灯连续闪烁表明扫描器处在标签编程模式。关机后

再开机可以退出该模式。

休眠模式

绿色指示灯每两秒闪烁一次

由于长时间闲置，扫描器马达和 / 或激

光器已经自动关闭，系统进入休眠模

式。

主机禁用

扫描器指示灯 1 秒钟关， 1/10

秒亮

主机禁止扫描。

现场可换部件

(FRU) 警告 (

故障模式 )

发出低音调声响 1 秒钟。指示

灯连续闪烁。

表示发现致命的 FRU 故障。请给系统支

持人员打电话寻求帮助。

FRU 指示

扫描器绿色指示灯连续闪烁，

与扬声器的报警声交替回应。

只有当按下音量 / 音调按钮后出现 FRU

警告时才会出现。请维修技术人员查找

FRU 故障。

a. 您可以选择启动或禁用指示灯的某些功能，但扫描器可能不会显示所有的指示。

Quick Reference Guide 29

Appendix A — Product Labeling

Power Supply

Models require either a Listed class II or class III with a Limited Power Source

(LPS).

For the safety certification to be valid, class III input power sources must be

IEC/EN60950-1 (EN 60335-series, EN 60065 or relevant) approved.

Input: 100 - 240 VAC Output: 9 - 10 VDC

Max. Current: 2.0 A Max. Power: 20 W

NOTE

Labels are shown here to illustrate their location only. Please view the labels

on your product for actual details.

IEC CLASS 1 LASER PRODUCT

Class IIa Laser Product. Avoid long term viewing of direct

laser light. Appareil á laser de classe IIa. Eviter toute

exposition prolongée de la vue à lumière laser directe.

Scanner Host PowerAux. Port

EAS Opening

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired operation.

THIS LASER PRODUCT COMPLIES WITH 21CFR 1040 AS APPLICABLE AS A CLASS IIA PRODUCT

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe A est confirme à la norme NMB-003 du Canada.

N263

NRTL

Safety

tested

Production

monitored

PRODUCT SERVICE

Product of USA

U S

XXXXXXXXXXXX

CAUTION - CLASS 3R LASER RADIATION WHEN OPEN.

AVOID DIRECT EYE EXPOSURE.

COVERED BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 4,709,195

4,709,369 4,712,853 4,749,879 4,786,798 4,792,666 4,798,943 4,799,164

4,816,660 4,861,972 4,861,973 4,866,257 4,868,836 4,879,456 4,963,719

4,991,692 5,144,118 5,179,270 5,198,649 5,247,162 5,229,588 5,410,108

5,459,308 5,440,110 5,475,207 5,493,108 5,705,802 5,723,852 5,834,708

30 Magellan

2300HS/2300HSΩ

Appendix B — Productivity Index Reporting Option

Productivity Index Reporting

™

Option.

Your scanner may be equipped with

the optional Productivity Index Reporting

™

feature. This feature allows for data

collection on the readability index of bar codes scanned by the scanner. This data

may be transmitted to the POS Terminal where it may be easily sorted for action

by the MIS department to improve bar code quality at the front end.

For additional information on how to enable Productivity Index Reporting in your

scanner, please refer to the Product Reference Guide (PRG)

Option "Productivity Index Reporting

™

Votre scanner peut être équipé de

l'option "Productivity Index Reporting™" qui permet la collecte de données sur

l'index de lecture des codes à barres scannés. Ces données peuvent être transmises

vers le Terminal POS où elles pourront être facilement exploitables par le service

informatique afin d'améliorer la qualité du code à barres en rayon.

Pour plus d'informations sur la manière d'activer PIR sur vos scanners, merci de

vous reporter au Product Reference Guide (PRG).

Productivity Index Reporting

™

Option.

Ihr scanner kann optional mit der

Funktion Productivity Index Reporting™ ausgestattet werden. Diese Funktion

sammelt Daten zur Lesbarkeit von Barcodes. Diese Daten können ans POS Termi-

nal übermittelt werden. Dort können die Daten durch die MIS Abteilung zur Ver-

besserung der Barcodequalität sortiert werden.

Für weitere Informationen, wie Sie das Productivity Index Reporting in Ihrem

Scanner aktivieren können, entnehmen Sie dem Product Reference Guide (PRG).

Opzione Indice di Produttività.

Il scanner può essere fornito con l'opzione

Productivity Index Reporting

™

. Quest'opzione permette il controllo della qualità

dei barcode letti dello scanner. Questi dati possono essere trasmessi al POS dove

possono essere facilmente analizzati dai sistemi informativi per migliorare la qualità

dei barcode stessi.

Per maggiori informazioni su come abilitare il Productivity Index Reporting nel

Scanner far riferimento al Product Reference Guide (PRG).

Quick Reference Guide 31

Opcion de Productivity Index Reporting.

Su escaner puede ser epuipado

con el opcional Indice de Productivity Index Reporting™. Esta funcion permite

colectar datos en el indice de la lectura de los codigos de barras por el escaner. Estos

datos pueden ser transmitidos a la Terminal POS donde puede ser facilmente clas-

ificado por el departamento de MIS para meforar la calidad de el codigo de barra

en la parte frontera.

Para informacion adicional en como abilitar su escaner con el Indice de Productiv-

idad Reportada, por favor referirse a la Guia de Referencia de el Producto (PRG).

Opção de Informe de Índice de Produtividade (Productivity Index

Reporting

O seu scanner pode estar equipado com a opção do Informe de

Índice de Produtividade. Esta opção permite coletar o dado do índice de leitura

dos códigos de barras lidos pelo scanner. Este dado pode ser transmitido para o ter-

minal PDV, aonde pode ser fácilmente depurado para ações pelo Departamento de

Sistemas para melhorar a qualidade dos códigos de barras na frente de caixas.

Para informações adicionais ou como habilitar o Informe do Índice de Produtiv-

idade em seu scanner, por favor consultar o Guia de Referência do Produto (PRG -

Product Reference Guide).

32 Magellan

2300HS/2300HSΩ

Appendix C — Laser Safety

International Caution Statements

Class I

English This scanner is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC

825-1:2001.

Class I and Class IIa products are not considered to be hazardous. The scanner contains internally a Visible Laser Diode (VLD) whose

emissions do not exceed the maximum limits as set forth in the above regulations. The scanner is designed so that there is no human

access to harmful laser light during normal operation, user maintenance or during prescribed service operations.

CAUTION

• Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser

light.

• Do not attempt to open or otherwise service any component in the optics cavity. Opening or servicing any part of the optics

cavity by unauthorized personnel may violate laser safety regulations. The optics system is a factory only repair item.

• Use of optical instruments with the scanner will increase eye hazard. Optical instruments include binoculars, microscopes

and magnifying glasses. This does not include eye glasses worn by the user.

French Ce scanner est certifié conforme à la norme DHHS/CDRH 21CFR sous-chapitre J et à la norme IEC 825-1:2001.

Les produits de classe I et de classe II ne sont pas considérés dangereux. Le scanner contient une diode laser visible (VLD) dont les émis-

sions ne dépassent pas les limites prescrites dans les normes précitées. Le scanneur est conçu de façon à ce qu’il ne soit pas possible

d’accéder à la lumière laser pendant l’utilisation normale, l’entretien par l’utilisateur et les fonctions de maintenance prescrites.

ATTENTION

• L’utilisation de procédures de contrôle, réglage ou utilisation autres que celles spécifiées dans ce document peut entraîner

une exposition dangereuse à la lumière du laser.

• Ne pas essayer d’ouvrir ni de réparer les composants de la cavité optique. L’ouverture ou la réparation d’une partie de la

cavité optique par une personne non qualifiée peut entraîner la violation des règles de sécurité relatives au laser. Le

système optique ne peut être réparé qu’en usine.

• Sont considérés comme instruments optiques les jumelles, les microscopes et les loupes. Les lunettes portées par l'utili-

sateur ne sont pas considérées comme tel.

German Dieser Scanner ist den in den Vereinigten Staaten geltenden Vorschriften des DHHS/CDRH 21 CFR Subchapter J und den Vorschriften

der IEC 825-1:2001 entsprechend bescheinigt.

Produkte der Klasse I oder der Klasse II sind als ungefährlich eingestuft. Im Inneren des Scanners befindet sich eine VLD (Visible Laser

Diode), deren Ausstrahlung die in den oben genannten Vorschriften angeführten Höchstgrenzen nicht überschreitet. Die Konstruktion des

Scanners garantiert, daß bei normalem Betrieb, bei Wartung durch den Benutzer oder im Laufe planmäßiger Wartungsarbeiten kein

Zugang zu schädlichem Laserlicht besteht.

VORSICHT

• Jegliche Anwendung von Streuungen, Reglern oder anderen Verfahren, die nicht in diesen Ausführungen erwähnt werden,

können eine gefährliche Laserlichtbestrahlung zur Folge haben.

• Das optische System darf nur vom Werk repariert werden. Das Öffnen oder Warten von Bestandteilen des optischen Hohl-

raums durch unbefugtes Personal verletzt die Laser-Sicherheitsbestimmungen.

• Der Gebrauch von optischen Instrumenten zusammen mit dem Scanner steigert die Gefahr der Augenschädigung. Zu optis-

chen Instrumenten gehören Ferngläser, Mikroskope und Lupen, aber nicht vom Benutzer getragene Brillengläser.

Italian È stato certificato che questo scanner si conforma ai requisiti della sezione J della normativa DHHS/CDRH 21CFR, e anche ai requisiti di

IEC 825-1:2001.

I prodotti di Classe I o Classe II non sono considerati pericolosi. Lo scanner contiene al suo interno un Visible Laser Diode (VLD), diodo

laser visibile, le cui emissioni non eccedono i limiti stabiliti dalle normative sunnominate. Lo scanner è progettato in modo che non ci sia

alcun accesso alla luce dannosa del laser nel corso di uso normale, di manutenzione da parte dell’utente o durante la manutenzione peri-

odica stabilita.

Quick Reference Guide 33

ATTENZIONE

• l’uso di comandi o di procedure diversi da quelli specificati in questa sede possono causare l’esposizione ad una luce laser

pericolosa.

• evitare di tentare di aprire o riparare dei componenti nella cavità ottica. L’apertura o la riparazione della cavità ottica da parte

di persone non autorizzate può essere in violazione dei regolamenti di sicurezza relativi all’impiego di raggi laser. Il sistema

ottico può essere riparato soltanto in fabbrica.

• l’impiego di strumenti ottici assieme al lettore fa aumentare il rischio di danni alla vista. Il termine “strumenti ottici” sta ad indi-

care binocoli, microscopi o lenti d’ingrandimento, ma esclude eventuali occhiali da vista indossati dall’utilizzatore.

Danish Denne scanner opfylder de amerikanske krav stillet i "DHHS/CDRH 21CFR Subchapter J" og opfylder også de krav, der stilles i IEC

825-1:2001.

Klasse I eller klasse II produkter anses for at være sikre. Scanneren indeholder en Visible Laser Diode (VLD), der ikke overskrider maksi-

mumgrænserne, som beskrevet i ovenstående reglement. Scanneren er konstrueret, så der ikke er nogen menneskelig kontakt medskade-

lige niveauer af laserbestråling under normal brug, normal vedligeholdelse eller under foreskrevet servicering.

ADVARSEL

• Udførsel af eftersyn eller justeringer eller anvendelse af andre procedurer end foreskrevet i vejledningen, kan medføre at

man udsættes for skadeligt laser lys.

• Forsøg ikke at åbne eller på anden vis udføre service på komponenter i det optiske hulrum. Uautoriseret åbning eller service

af dele af det optiske hulrum, kan betyde overtrædelse af Laser sikkerheds regulativerne. Det optiske system må kun repar-

eres af fabrikken.

• Brug af optiske instrumenter med scanneren vil forøge faren for øjenbeskadigelser. Optiske instrumenter indbefatter kik-

kerter, mikroskoper og forstørrelsesglas. Det indbefatter ikke briller båret af brugeren.

Dutch Deze scanner is in de V.S. goedgekeurd en voldoet aan de vereisten van DHHS/CDRH 21CFR Subchapter J een aan de vereisten van IEC

825-1:2001.

Producten van klasse I (Class I) en klasse II (Class II) worden niet geacht gevaarlijk te zijn.

De scanner bevat een inwendige Visible Laser Diode (VLD) waarvan de emissies de maximumgrenzen van bovenstaande reglementen

niet overschrijden.

De scanner is zo ontworpen dat men bij normaal gebruik, onderhoud of tijdens het uitvoeren van de voorgeschreven onderhoud-

swerkzaamheden niet aan schadelijke niveaus wordt blootgesteld.

WAARSCHUWING

• Men kan aan gevaarlijk laserlicht worden blootgesteld als de apparaten niet goed worden bediend of afgesteld, of als de pro-

cedures niet worden uitgevoerd zoals hierin beschreven staat.

• Probeer niet om onderdelen in de opticaruimte te openen of er op enige wijze onderhoud aan uit te voeren. Openen of

onderhoud van onderdelen van de opticaruimte door onbevoegd personeel kan in strijd zijn met de laserveiligheidsregle-

menten. Het opticasysteem mag alleen in de fabriek worden gerepareerd.

• Gebruik van optische instrumenten met de scanner vergroot het gevaar dat de ogen aan schadelijke niveaus van laserlicht

worden blootgesteld. Optische instrumenten zijn onder meer verrekijkers, microscopen en vergrootglazen. Zo de gebruiker

een bril draagt, valt die niet onder optische instrumenten.

Swedish Denna scanner uppfyller de amerikanska kraven DHHS/CDRH 21CFR Subchapter J samt kraven i IEC 825-1:2001.

Produkter i Klass I (Class I) och Klass II (Class II) anses ej farliga. Scannern är utrustad med en intern, synlig laserdiod (Visible Laser

Diode - VLD) vars emission inte överstiger max. värdena i ova stående säkerhetsföreskrifter. Scannern har konstruerats så att personer vid

normal användning, bruksunderhåll och föreskriven service inte utsätts för skadlig laserstrålning.

VARNING

• Om apparaten används på annat sätt än som specificerats i denna bruksanvisning kan användaren utsättas för farlig laser-

strålning.

• Försök inte öppna eller reparera komponenter i den optiska kammaren. Om icke auktoriserad personal öppnar eller repar-

erar delar i den optiska kammaren, kan detta vara ett brott mot säkerhetstföreskrifterna för laserutrustning. Det optiska sys-

temet får endast repareras i fabriken.

• Om optiska instrument används tillsammans med scannern ökar risken för ögonskador. Optiska instrument omfattar kikare,

mikroskop och förstoringsglas. Glasögon som bärs av användaren omfattas ej av detta.

34 Magellan

2300HS/2300HSΩ

Finnish Tämä tutkain on hyväksytty Yhdysvalloissa vastaamaan DHHS/CDRH 21CFR Subchapter J luokka II ja 825-1:2001 IEC-vaatimuksia.

Luokka I tai Luokka II tuotteiden ei katsota olevan vaarallisia. Tutkain sisältää sisäisen näkyvän laserdiodin (Visible Laser Diode (VLD),

jonka päästöt eivät ylitä yllä olevien säädösten asettamia maksimirajoja. Tutkain on suunniteltu siten, etteivät ihmiset altistu vaaralliselle

lasersäteilylle normaalikäytön, käyttäjän suorittaman huollon tai ohjeiden mukaisten huoltotoimenpiteiden aikana.

VAROITUS

• Laitteen käyttö tai sääto muuten kuin näiden ohjeiden mukaan, voi aiheuttaa vaarallista laservaloa.

• Älä yritä avata tai muuten huoltaa mitään komponentteja optisessa osassa. Mikäli epäpätevä henkilö korjaa tai avaa jonkin

komponentin optisessa osassa, voidaan tämän katsoa olevan rikkomus turvallisuusohjeita vastaan. Optinen systeemi on

osa, joka voidaan korjata ainoastaan tehtaaalla.

• Optisten laitteiden käyttö tutkaimen kanssa lisää silmien vaaraa. Optisiin laitteisiin kuuluu mm. kiikarit, mikroskoopit ja

suurennuslasit. Käyttäjän silmälasit eivät kuulu näihin laitteisiin.

Norwegian Denne skanneren er godkjent i USA i samsvar med retningslinjene for DHHS/CDRH 21CFR, avsnitt J, og til IEC-kravene 825-1:2001.

Produkter i klasse I eller klasse II ansees ikke som helsefarlige. Skanneren inneholder en innvendig, synlig laserdiode (VLD, Visible Laser

Diode), som ikke overskrider maksimalgrensene som er fastsatt i retningslinjene ovenfor. Skanneren er konstruert, slik at personer ikke

utsettes for farlige doser med laserstråler ved normal drift, brukers vedlikehold eller ved foreskrevet service.

ADVARSEL

• Bruk av kontroller eller justeringer, eller utføring av andre prosedyrer enn de som er spesifisert her, kan føre til at man

utsettes for livsfarlige laserstråler.

• Forsøk ikke å åpne eller på annen måte reparere komponenter i det optiske kammeret. Ingen del av det optiske kammeret

må åpnes eller repareres av ikke-autorisert personale, da dette kan krenke forskrifter for sikker bruk av laserstråler. Det

optiske systemet kan bare repareres på fabrikken.

• Bruk av optiske instrumenter sammen med skanneren øker mulighetene for øyenskade. Optiske instrumenter, omfatter kik-

kert, mikroskop og forstørrelsesglass. Vanlige briller regnes ikke med i denne kategorien.

Portuguese Este scanner foi certificado nos EUA para atender os requisitos do subcapítulo J do DHHS/CDRH 21 CFR e os requisitos do IEC 825-

1:2001.

Os produtos da Classe I ou Classe II não são considerados perigosos. O scanner contém internamente um Diodo de Laser Visível (VLD -

Visible Laser Diode) cujas emissões não ultrapassam os limites definidos nos regulamentos mencionados acima. O scanner foi projetado

de maneira que não exista acesso humano à luz de laser nociva durante a operação normal, manutenção pelo usuário ou durante as oper-

ações recomendadas de serviço.

CUIDADO

• O uso de quaisquer controles, ajustes ou procedimentos além dos aqui especificados pode resultar em exposição perigosa

à luz laser.

• Não tente abrir a cavidade ótica nem consertar, de forma alguma, qualquer de seus componentes. A abertura da cavidade

ótica, ou o conserto de qualquer uma de suas peças por pessoal não autorizado poderá violar as normas de segurança do

sistema de laser. O sistema ótico só poderá ser consertado pelo fabricante.

• O uso de instrumentos óticos com o scanner aumenta o perigo aos olhos. Instrumentos óticos incluem binóculos, microscó-

pios e lentes de aumento. Estes não incluem os óculos do próprio usuário.

Spanish Este escáner está certificado en los EE.UU. porque reúne los requisitos DHHS/CDRH 21CFR Sección J y los requisitos de IEC 825-

1:2001.

Los productos de Clase I o Clase II no se consideran como peligrosos. El escáner tiene en su interior un Diodo Láser Visible (VLD) cuyas

emisiones no exceden los límites máximos fijados en los reglamentos mencionados anteriormente. El escáner está diseñado de modo que

las personas no tengan acceso a la luz láser peligrosa durante la operación normal, el mantenimiento por parte del usuario o durante las

operaciones de servicio prescritas.

PRECAUCIÓN

• el uso de controles o ajustes o la ejecución de procedimientos diferentes de los aquí especificados puede dar lugar a luz

láser peligrosa.

• no trate de abrir o prestar servicio en forma alguna a ningún componente en la cavidad óptica. La apertura o reparación de

cualquier parte de la cavidad óptica por personal no autorizado puede infringir las regulaciones de seguridad láser. El

sistema óptico se puede reparar únicamente en la fábrica.

• el uso de instrumentos ópticos junto con el escáner, incrementará el daño visual. Los instrumentos ópticos incluyen los

prismáticos, microscopios y lentes de aumento. Éstos no incluyen las gafas que lleve el usuario.

Quick Reference Guide 35

Chinese

Japanese

36 Magellan

2300HS/2300HSΩ

Hebrew

Quick Reference Guide 37

NOTES

38 Magellan

2300HS/2300HSΩ

Appendix D — Warranty

Warranty

Datalogic warrants to Customer that this product will be free from defects in materials and workmanship for a period of 1 year from

product shipment. In order to obtain service under this Warranty, Customer must notify Datalogic of the claimed defect before the expi-

ration of the Warranty period and obtain from Datalogic a return authorization number for return of the product to designated Datalogic

service center. If Datalogic determines Customer’s claim is valid, Datalogic will repair or replace product without additional charge for

parts and labor. Customer shall be responsible for packaging and shipping the product to the designated Datalogic service center, with

shipping charges prepaid. Datalogic shall pay for the return of the product to Customer if the shipment is to a location within the country

in which the Datalogic service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any

other charges for products returned to any other locations.

Warranty is subject to the limitations and exclusions set forth in the paragraphs that follow.

WARRANTY SET FORTH ABOVE IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANT-

ABILITY AND FITNESS.

Exclusions

Warranty coverage shall not apply to any claimed defect, failure or damage which Datalogic determines was caused by: abuse, neglect,

improper use of product; failure to provide product maintenance, including but not limited to cleaning of the display in accordance with

product reference guide; installation or service of product by other than Datalogic representatives; use of product with any other instru-

ment, equipment or apparatus; modification or alteration of product or units with Warranty Void labels that have been tampered with.

External cables and replacement of upper window/cartridge due to scratching, stains or other degradation will not be covered under the

Warranty. External power supplies returned for service must be accompanied by the original product for performance of service.

Returned products that Datalogic Inc. has determined are not covered by Warranty, will be charged Datalogic Inc. standard repair rates

then in effect for repair of product. Replacement of display due to scratching, stains or other degradation will not be covered under War-

ranty. If a product is determined to be not repairable customer will be notified and product may be returned to customer at their

request. A minimum repair fee may be charged.

Limitation of Liability

DATALOGIC's REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCT AS SET FORTH ABOVE IS THE CUSTOMER’S SOLE AND

EXCLUSIVE REMEDY ON ACCOUNT OF CLAIMS OF BREACH OF WARRANTY OR PRODUCT DEFECT. UNDER NO CIRCUM-

STANCES WILL DATALOGIC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY INCIDEN-

TAL, CONSEQUENTIAL INDIRECT, SPECIAL OR CONTINGENT DAMAGES REGARDLESS OF WHETHER DATALOGIC HAD

ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

Assignment

Customer may not assign or otherwise transfer its rights or obligations under Warranty except to a purchaser or transferee of product.

No attempted assignment or transfer in violation of this provision shall be valid or binding upon Datalogic.

Risk of Loss

Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall assume risk of loss or damage for product

in Datalogic's possession or product being returned to Customer by Datalogic, except such loss or damage as may be caused by the

negligence of Customer, its agents or employees. In the absence of specific written instructions for the return of product to Customer,

Datalogic will select the carrier, but Datalogic shall not thereby assume any liability in connection with the return shipment.

Quick Reference Guide 39

NOTES

40 Magellan

2300HS/2300HSΩ

NOTES

DECLARATION OF CONFORMITY

Datalogic hereby declares that the Equipment specified below has been tested and found compliant to the following Directives and Standards:

Directives:

EMC 89/336/EEC

Low Voltage 73/23/EEC

Standards:

EN55022-B:2001 - Generic Emissions

CISPR 22-B:2001 - Generic Emissions

EN50082-1:1998 - Generic Immunity - Light Industry

EN55024:2001 - Generic Immunity - ITE

EN60950:2000 - ITE Safety

EN60825-1/A2:2001 - Laser Safety

EN61000-3-2:2000 - Harmonic Current

EN61000-3-3:1994 - Voltage Fluctuation/Flicker

Equipment Type:

Barcode Scanning Equipment

Products:

Magellan 2200VS and 2300HS

Placed into EU Service:

April 2007 under the Datalogic trademark. Nov. 2003 under the PSC trademark.

Responsible

Manufacturer:

Datalogic Scanning, Inc. 959 Terry St. Eugene, OR USA

Australia

Datalogic Scanning Pty Ltd

North Ryde, Australia

Telephone: [61] (2) 9870 3200

Fax: [61] (2) 9878 8688

France and Benelux

Datalogic Scanning Sarl

LES ULIS Cedex, France

Telephone: [33].01.64.86.71.00

Fax: [33].01.64 46.72.44

Germany

Datalogic Scanning GmbH

Darmstadt, Germany

Telephone: 49 (0) 61 51/93 58-0

Fax: 49 (0) 61 51/93 58 58

Italy

Datalogic Scanning SpA

Vimercate (MI), Italy

Telephone: [39] (0) 39/62903.1

Fax: [39] (0) 39/6859496

Japan

Datalogic Scanning KK

Shinagawa, Tokyo, Japan

Telephone: 81 (0)3 3491 6761

Fax: 81 (0)3 3491 6656

Latin America

Datalogic Scanning, Inc

Miami, Florida, USA

Telephone: (305) 591-3222

Fax: (305) 591-3007

Spain and Portugal

Datalogic Scanning Sarl Sucursal en

España

Madrid, Spain

Telephone: 34 91 746 28 60

Fax: 34 91 742 35 33

United Kingdom

Datalogic Scanning LTD

Watford, England

Telephone: 44 (0) 1923 809500

Fax: 44 (0) 1923 809 505

Datalogic Scanning, Inc.

959 Terry Street

Eugene, OR 97402

Telephone: (541) 683-5700

Fax: (541) 345-7140

www.scanning.datalogic.com

Transcripción de documentos

Magellan® 2300HS/2300HSΩ Quick Reference Guide Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page. Disclaimer Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice. Datalogic is a registered trademark of Datalogic S.p.A. and the Datalogic logo is a trademark of Datalogic S.p.A. all licensed to Datalogic Scanning, Inc. All other trademarks and trade names referred to herein are property of their respective owners. Magellan, FirstStrike and SurroundScan are registered trademarks of Datalogic Scanning, Inc. AllWeighs, OmegaTek, Produce Rail, Productivity Index Reporting, SmartSentry and Any-Weighs are all trademarks of Datalogic Scanning, Inc. This product may be covered by one or more of the following patents: 4603262 • 4639606 • 4652750 • 4672215 • 4699447 • 4709369 • 4749879 • 4786798 • 4792666 • 4794240 • 4798943 • 4799164 • 4820911 • 4845349 • 4861972 • 4861973 • 4866257 • 4868836 • 4879456 • 4939355 • 4939356 • 4943127 • 4963719 • 4971176 • 4971177 • 4991692 • 5001406 • 5015831 • 5019697 • 5019698 • 5086879 • 5115120 • 5144118 • 5146463 • 5179270 • 5198649 • 5200597 • 5202784 • 5208449 • 5210397 • 5212371 • 5212372 • 5214270 • 5229590 • 5231293 • 5232185 • 5233169 • 5235168 • 5237161 • 5237162 • 5239165 • 5247161 • 5256864 • 5258604 • 5258699 • 5260554 • 5274219 • 5296689 • 5298728 • 5311000 • 5327451 • 5329103 • 5330370 • 5347113 • 5347121 • 5371361 • 5382783 • 5386105 • 5389917 • 5410108 • 5420410 • 5422472 • 5426507 • 5438187 • 5440110 • 5440111 • 5446271 • 5446749 • 5448050 • 5463211 • 5475206 • 5475207 • 5479011 • 5481098 • 5491328 • 5493108 • 5504350 • 5508505 • 5512740 • 5541397 • 5552593 • 5557095 • 5563402 • 5565668 • 5576531 • 5581707 • 5594231 • 5594441 • 5598070 • 5602376 • 5608201 • 5608399 • 5612529 • 5629510 • 5635699 • 5641958 • 5646391 • 5661435 • 5664231 • 5666045 • 5671374 • 5675138 • 5682028 • 5686716 • 5696370 • 5703347 • 5705802 • 5714750 • 5717194 • 5723852 • 5750976 • 5767502 • 5770847 • 5786581 • 5786585 • 5787103 • 5789732 • 5796222 • 5804809 • 5814803 • 5814804 • 5821721 • 5822343 • 5825009 • 5834708 • 5834750 • 5837983 • 5837988 • 5852286 • 5864129 • 5869827 • 5874722 • 5883370 • 5905249 • 5907147 • 5923023 • 5925868 • 5929421 • 5945670 • 5959284 • 5962838 • 5979769 • 6000619 • 6006991 • 6012639 • 6016135 • 6024284 • 6041374 • 6042012 • 6045044 • 6047889 • 6047894 • 6056198 • 6065676 • 6069696 • 6073849 • 6073851 • 6094288 • 6112993 • 6129279 • 6129282 • 6134039 • 6142376 • 6152368 • 6152372 • 6155488 • 6166375 • 6169614 • 6173894 • 6176429 • 6188500 • 6189784 • 6213397 • 6223986 • 6230975 • 6230976 • 6237852 • 6244510 • 6259545 • 6260763 • 6266175 • 6273336 • 6276605 • 6279829 • 6290134 • 6290135 • 6293467 • 6303927 • 6311895 • 6318634 • 6328216 • 6332576 • 6332577 • 6343741 • 6454168 • 6478224 • 6568598 • 6578765 • 6705527 • 6974084 • 6991169 •7051940 • AU703547 • D312631 • D313590 • D320011 • D320012 • D323492 • D330707 • D330708 • D349109 • D350127 • D350735 • D351149 • D351150 • D352936 • D352937 • D352938 • D352939 • D358588 • D361565 • D372234 • D374630 • D374869 • D375493 • D376357 • D377345 • D377346 • D377347 • D377348 • D388075 • D446524 • EP0256296 • EP0260155 • EP0260156 • EP0295936 • EP0325469 • EP0349770 • EP0368254 • EP0442215 • EP0498366 • EP0531645 • EP0663643 • EP0698251 • GB2252333 • GB2284086 • GB2301691 • GB2304954 • GB2307093 • GB2308267 • GB2308678 • GB2319103 • GB2333163 • GB2343079 • GB2344486 • GB2345568 • GB2354340 • ISR107546 • ISR118507 • ISR118508 • JP1962823 • JP1971216 • JP2513442 • JP2732459 • JP2829331 • JP2953593 • JP2964278 • MEX185552 • MEX187245 • RE37166 • Other Patents Pending DATALOGIC SCANNING, INC. MAGELLAN® END USER LICENSE AGREEMENT Notice to End User: The Datalogic Product you have acquired contains embedded Software, which is integral to the product's operation. This Software is being provided to you under license, subject to the terms and conditions of this Agreement. If you use the Datalogic Product, you will be deemed to have accepted the terms and conditions of this Agreement. If you do not intend to be bound to the terms of this Agreement, Datalogic is not willing to license the Software to you, you may not use the Datalogic Product or the Software, and you must contact the party from whom you acquired the Datalogic Product for instructions. This End User Software License Agreement ("Agreement") is a legally binding agreement governing the licensing of the Software and Documentation by Datalogic,Scanning Holdings, Inc. and its subsidiaries and affiliates ("Datalogic") to the entity or person who has purchased or otherwise acquired a Datalogic Product ("End User"). For purposes of this Agreement, any software that is associated with a separate end-user license agreement is licensed to you under the terms of that license agreement. Datalogic and End User hereby agree as follows: 1. Definitions. 1.1 1.2 1.3 1.4 "Documentation" means materials such as user's guides, program reference guides, quick reference guides, manuals, or similar materials associated with or related to the Datalogic Product, whether in printed, "online", or other form. "Proprietary Information" means: (a) source code, object code, software, documentation, and any related internal design, system design, data base design, algorithms, technology, technical data or information, implementation techniques, and trade secrets related to the Software, (b) any other trade secrets marked appropriately or identified as proprietary or confidential, and (c) any information that End User, under the circumstances, should recognize as confidential. Proprietary Information does not include any information that the receiving party can establish was (1) in the public domain, (2) already in the receiving party's possession or rightfully known prior to receipt, (3) rightfully learned from a third party not in violation of any other's proprietary rights, or (4) independently developed without access to Proprietary Information. "Datalogic Product" means the Datalogic Magellan® 1000i series, Magellan® 1400i series, Magellan® 8100 series, Magellan® 8200 series, Magellan® 8300 series, Magellan® 8400 series, Magellan® 8500 series, Magellan® 9500 series, and/or Magellan SL® series scanner and/or scanner/scale product, including all embedded Software in and all Documentation related to such product, which has been purchased or otherwise acquired by End User, whether obtained directly or indirectly from Datalogic. "Software" means any software or computer programs of Datalogic or its third party licensors in machine readable form which is embedded in the Datalogic Product, whether obtained directly or indirectly from Datalogic, including any replacement, update, upgrade, enhancement or modification. 2. Scope Of License Granted. 2.1 2.2 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license to use the Software, solely on the Datalogic Product in which it is embedded ("designated Datalogic Product"), in machine-readable form only, solely for End User's internal business purposes. This Agreement does not convey ownership of the Software to End User. Title to the Software shall be and remain with Datalogic or the third party from whom Datalogic has obtained a licensed right. As used in this Agreement, the term "purchase" or its equivalents when applied to the Software shall mean "acquire under license." End User is not entitled to receipt or use of the source code to any Software. End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise reproduce or remanufacture the Software, whether modified or unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Software to any other person or organization, for purposes other than as expressly provided in this Agreement, without Datalogic's prior written consent. 3. Transfers, Support. 3.1 3.2 3.3 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer, or other use of the Software on other than the designated Datalogic Product will be a material breach of this Agreement. However, Datalogic may elect not to terminate this Agreement or the granted licenses, but instead may elect to notify End User that End User is deemed to have ordered and accepted a license for each breaching use. End User shall pay Datalogic the applicable list price for such licenses as of the date of such breach. End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Datalogic Product to any third party unless such third party agrees with Datalogic in writing to be bound by the terms and conditions of this Agreement. Any such transfer of the Datalogic Product absent such agreement shall be null and void. End User may obtain support for Software from Datalogic at Datalogic's standard support fees and under Datalogic's standard support terms and conditions in effect at the time the support is requested. 4. Intellectual Property. End User acknowledges that the Software constitutes valuable trade secrets of Datalogic or Datalogic's third party licensors and that the Software is protected by intellectual property laws and treaties. The license set forth in this Agreement does not transfer to End User any ownership of Datalogic's or its third party licensors' copyrights, patents, trademarks, service marks, trade secrets, or other intellectual property rights and End User shall have no right to commence any legal actions to obtain such rights. End User shall not remove, modify, or take any other action that would obscure any copyright, trademark, patent marking, or other intellectual property notices contained in or on the Datalogic Product. 5. Proprietary Information. 5.1 End User acknowledges that Proprietary Information is the confidential, proprietary, and trade secret property of Datalogic and Datalogic's third party licensors and End User acquires no right or interest in any Proprietary Information. 5.2 End User shall not disclose, provide, or otherwise make available the Proprietary Information of Datalogic or its third party licensors to any person other than End User's authorized employees or agents who are under confidentiality agreement, and End User shall not use the Proprietary Information other than in conjunction with use of the Datalogic Product exclusively for End User's internal business purposes. End User shall take steps to protect the Proprietary Information no less securely than if it were End User's own intellectual property. The provisions of this Proprietary Information Section shall survive and continue for five (5) years after the termination of this Agreement. 5.3 6. Limited Warranty. 6.1 Datalogic warrants that, under normal use and operation, the Datalogic Product will conform substantially to the applicable Documentation for the period specified in the Documentation. During this period, for all reproducible nonconformities for which Datalogic has been given written notice, Datalogic will use commercially reasonable efforts to remedy nonconformities verified by Datalogic. End User agrees to supply Datalogic with all reasonably Quick Reference Guide i 6.2 requested information and assistance necessary to help Datalogic in remedying such nonconformities. For all defects reported to Datalogic within the warranty period, Datalogic's liability is limited to providing End User with one copy of corrections or responding to End User's problem reports according to Datalogic's standard assistance practices. Datalogic does not warrant that the product will meet End User's requirements or that use of the product will be uninterrupted or error free, or that Datalogic's remedial efforts will correct any nonconformance. This limited warranty does not cover any product that has been subjected to damage or abuse, whether intentionally, accidentally, or by neglect, or to unauthorized repair or unauthorized installation, and shall be void if End User modifies the product, uses the product in any manner other than as established in the Documentation, or if End User breaches any of the provisions of this Agreement. EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PROVIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 7. Infringement. 7.1 7.2 7.3 7.4 Datalogic will defend End User against any claim in a lawsuit that the Datalogic Product furnished hereunder infringe a United States patent or copyright of a third party and Datalogic will pay any damages finally awarded against End User by a court of competent jurisdiction that are attributable to such claim or will pay End User's part of any settlement that is attributable to such claim, provided, that 1) End User notifies Datalogic promptly in writing of the claim, 2) Datalogic controls the defense or settlement of the claim, and 3) End User cooperates fully with Datalogic in such defense or settlement. All notices of a claim should be sent to Datalogic Scanning Holdings, Inc., Legal Department, 959 Terry Street, Eugene, OR 97402. In the defense or settlement of any such claim, Datalogic may, at its option, 1) procure for End User the right to continue using the Datalogic Product, 2) modify the Datalogic Product so that it becomes non-infringing, 3) replace the Datalogic Product with an equivalent product not subject to such claim, or 4) provide End User an opportunity to return the Datalogic Product and receive a refund of the purchase price paid, less a reasonable allowance for use. Datalogic shall have no liability to End User for claims of infringement based upon 1) the use of any Datalogic Product in combination with any product which Datalogic has not either furnished or authorized for use with such Datalogic Product 2) the use of any Datalogic Product designed, manufactured, or modified to the specifications of End User, or 3) End User's modification of the Datalogic Product without written authorization from Datalogic. THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY INFRINGEMENT, CANCELS AND SUPERSEDES ANY PRIOR AGREEMENTS, WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CONTEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PARTIES, WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE WRITING SIGNED BY BOTH PARTIES. 8. Limitation Of Liability. EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S LIABILITY FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATALOGIC PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO END USER OR ANY THIRD PARTY FOR LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 9. Government Restricted Rights; International Use. 9.1 9.2 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions for computer software developed at private expense as set forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable. If End User is using the Datalogic Product outside of the United States, End User must comply with the applicable local laws of the country in which the Datalogic Product is used, with U.S. export control laws, and with the English language version of this Agreement. The provisions of the "United Nations Convention on International Sale of Goods" shall not apply to this Agreement. 10. Termination. 10.1 10.2 Either party may terminate this Agreement or any license granted under this Agreement at any time upon written notice if the other party breaches any provision of this Agreement. Upon termination of this Agreement, End User immediately shall cease using any non-embedded software and shall return to Datalogic or destroy all non-embedded software covered by this Agreement, and shall furnish Datalogic with a certificate of compliance with this provision signed by an officer or authorized representative of End User. For embedded software, End User agrees to sign a waiver prepared by Datalogic concerning further use of the embedded Software. End User's resumed or continued use of the embedded Software after termination shall constitute End User's agreement to be bound by the terms and conditions of this Agreement for such use. 11. General Provisions. 11.1 Entire Agreement; Amendment. This document contains the entire agreement between the parties relating to the licensing of the Software and supersedes all prior or contemporaneous agreements, written or oral, between the parties concerning the licensing of the Software. This Agreement may not be changed, amended, or modified except by written document signed by Datalogic. 11.2 Notice. All notices required or authorized under this Agreement shall be given in writing, and shall be effective when received, with evidence of receipt. Notices to Datalogic shall be sent to the attention of Contract Administration, Datalogic Scanning Holdings, Inc., 959 Terry Street, Eugene, OR 97402, or such other address as may be specified by Datalogic in writing. Waiver. A party's failure to enforce any of the terms and conditions of this Agreement shall not prevent the party's later enforcement of such terms and conditions. Governing Law; Venue: This Agreement and the rights of the parties hereunder shall be governed by and construed in accordance with the laws of the State of Oregon U.S.A, without regard to the rules governing conflicts of law. The state or federal courts of the State of Oregon located in either Multnomah or Lane counties shall have exclusive jurisdiction over all matters regarding this Agreement, except that Datalogic shall have the right, at its absolute discretion, to initiate proceedings in the courts of any other state, country, or territory in which End User resides, or in which any of End User's assets are located. 11.3 11.4 11.5 Attorneys’ Fees. In the event an action is brought to enforce the terms and conditions of this Agreement, the prevailing party shall be entitled to reasonable attorneys' fees, both at trial and on appeal. - END - ii Magellan® 2300HS/2300HSΩ CONTENTS English .......................................................................................................................................1 Francais .....................................................................................................................................5 Deutsch ......................................................................................................................................9 Italiano .....................................................................................................................................13 Español ....................................................................................................................................17 Portugues ................................................................................................................................21 Chinese ....................................................................................................................................25 Appendix A — Product Labeling ...........................................................................................29 Appendix B — Productivity Index Reporting Option ..........................................................30 Appendix C — Laser Safety ...................................................................................................32 Appendix D — Warranty .........................................................................................................38 Quick Reference Guide iii NOTES iv Magellan® 8500/8500Ω Quick Reference Guide Introduction This guide offers a summary of basic scanner operation for first time users. Installers, system managers and other technical personnel can find installation, programming and further advanced information in the Product Reference Guide. Up-todate revisions of publications can be viewed, printed and downloaded from the website listed on the back cover of this manual. Printed manuals can also be ordered from your dealer/distributor. Connection For your convenience, Figure 1 shows scanner connections and their functions. Figure 1. Connections EAS Opening Scanner Host EAS Connection · Electronic Article Surveillance Connection Connection to this port is Optional Quick Reference Guide POS TERMINAL Aux. Port Power AUXILIARY PORT · Test Port · Label Data · Application Download · On Screen Programming (OSP) (where appropriate) · Application Download · RS-232 Handheld Scanner Input · Auxiliary RS-232 Label Data Output POWER · DC Brick Input Connection to this port is Optional 1 Operation Scanning Items The scanner is mounted so its scan window is flush with the countertop. This allows for maximum working space, and also permits the user to slide items over its surface without having to grasp or pick them up. Bar codes are effortlessly scanned when swept through the zone projected from the substantial scan window as shown in Figure 2a. Facing bar code labels in the direction of scanning, or toward the scan window will optimize the scan rate. The arrow on the scanner’s top cover indicates the direction scanned items should be moved (see Figure 2b). NOTE With FirstStrikeTM decoding software, the scanner can read most hard-to-read codes quickly and without excess orientation. Figure 2. Operating the Scanner a Item Bar Code Items are pushed or slid past scanner b Scan Volume Product Flow d Volume/Tone Push Button Scanner c 2 Green LED Magellan® 2300HS/2300HSΩ Volume/Tone Push Button The Volume/Tone Push Button (Figure 2d — accessed by removing the Top Cover Figure 2c) also performs multiple functions depending upon the duration of time it is pressed: Volume changes made using the Volume/Tone Push Button are lost when the scanner is powered-down and are reset to the configured setting. If you wish to permanently change the volume, use the special programming labels in the Product Reference Guide. NOTE Table 1. Volume/Tone Push Button Functions PRESS DURATION FUNCTION COMMENT Wakes scanner from Sleep Mode Alternatively, the scanner can be awakened by: - Moving an object through the scan zone. - Scanning with an attached auxiliary scanner. Increments volume Press the push button momentarily to increase speaker volume. When the loudest volume is reached, a repeated press of the push button cycles volume back to the lowest setting, then volume increases on subsequent press(es). Four volume levels are available. Increments tone Press the push button for approximately 2 seconds, then release. Each time this is done, the beeper will sound at one of three tones. Stop when the desired tone (high, medium or low) is sounded. 4 Seconds Scanner Diagnostics Modea This mode allows system support personnel to troubleshoot problems with the scanner and is used to determine if it can read bar codes. Press the button for eight seconds or cycle power to exit Scanner Diagnostics Mode and reset the scanner. 8 Seconds Resets Scannerb Only system support personnel should perform a reset. Momentary (when scanner is asleep) Momentary (when scanner is awake) Hold, then release when the beeper sounds a. By standard default, this function is normally disabled to prevent accidental activation by users. b. Users should not perform scanner resets except under the direction of trained systems support personnel. Quick Reference Guide 3 Green LED Indicator The green LED (Figure 2d) indicates scanner status as shown in the table below. Table 2. Green LED Indications LED INDICATION Scanner Activea DURATION COMMENT Scanner (Green) LED on steady and dim The scanner is ready for operation. Scanning is immediately available. (Normal Mode) Good Read Indi- Scanner (Green) LED - bright flash a cation Program Mode Indication Sleep Mode Indication Host Disabled Field Replaceable Unit (FRU) Warning (Error Mode) Scanner (Green) LED - Continuous flashing Scanner (Green) LED flashes slowly Scanner (Green) LED 1-second off, 1/10second on Audible low tone 1 second. LED flashes continuously. Scanner (Green) LED flashes a coded sequence in concert with the speaker. FRU Indication Indicates a bar code has been read and decoded. Indicates the scanner is in Label Programming Mode. Cycle power to exit Programming Mode. The scanner motor and/or laser have automatically switched off and the unit has entered Sleep Mode due to extended inactivity. Host has disabled scanning. Serves notice that a fatal FRU failure has been detected. Call systems support for service. Occurs ONLY upon Volume/Tone button push following a FRU warning. Enables service technicians to identify FRU failures. a. Certain functions of the LED are selectable to be enabled or disabled. Your scanner may not be programmed to display all indications. 4 Magellan® 2300HS/2300HSΩ Introduction Ce guide présente une synthèse du fonctionnement de base du scanner à l'attention des utilisateurs novices. Les installateurs, les administrateurs de système et autres personnels techniques pourront obtenir des informations sur l'installation, la programmation ainsi que d'autres indications plus avancées dans le Guide de référence du produit. Il est possible de consulter, d'imprimer et télécharger des mises à jour des publications à partir du site de Datalogic à l'adresse reportée sur la couverture postérieure de ce manuel. Il est également possible de commander des manuels imprimés auprès de votre vendeur/distributeur. Raccordement Pour vous aider, consulter la Figure 3 qui illustre les raccordements et les fonctions du scanner Figure 3. Raccordement EAS Opening Scanner Host Raccordement EAS · Système de surveillance électronique d'articles (EAS) Raccordement Le raccordement à ce port est facultatif Quick Reference Guide Terminal d'encaissement (POS) · Données étiquette · Téléchargement de l'application (le cas échéant) Aux. Port Port auxiliaire Power Alimentation · Entrée Brick CC · Port d'essai · Affichage de la programmation (OSP) · Téléchargement de l'application · Entrée scanner à main RS-232 · Sortie auxiliaire RS-232 données étiquette Le raccordement à ce port est facultatif 5 Fonctionnement Lecture d’articles Le scanner est installé de manière à positionner sa fenêtre de lecture au même niveau que le comptoir. Cette procédure permet d'obtenir un espace de travail maximum et permet à l'utilisateur de faire glisser les articles sur la surface sans devoir les saisir ou les soulever. Les codes à barres sont numérisés sans aucun effort lorsqu'ils sont passés à travers la zone projetée à partir de la grande fenêtre de lecture illustrée à la Figure 4a. NOTA La position en face des étiquettes des codes à barres dans la direction de lecture ou face à la fenêtre de lecture optimisera le taux de lectures réussies. La flèche présente sur le couvercle supérieur du scanner indique la direction de déplacement à suivre pour numériser les articles (voir Figure 4b). Grâce au logiciel de décodage FirstStrike™, le scanner peut capturer rapidement et avec une orientation minime la plupart des codes de lecture difficile. Figure 4. Mode de lecture " Transfert " et " Présentation " a Code à barres de l'article Les articles sont poussés ou glissés devant le scanner b Volume V de lecturee Circulation des produits d Bouton-poussoir volume/tonalité Scanner c 6 voyant DEL vert Magellan® 2300HS/2300HSΩ Bouton-poussoir volume/tonalité Le bouton-poussoir volume/tonalité exécute également des fonctions multiples selon la durée de son activation : Les changements de volume rendent l'utilisation du Bouton de réglage du Volume/Tonalité difficile lorsque le scanner est hors tension et est réinitiliasé au paramètre configuré. Si vous désirez changer définitivement le volume, utilisez les étiquettes spéciales de programmation dans le Guide de référence du produit. NOTA Tableau 3. Fonctions du bouton-poussoir Volume/tonalité DURÉE D'ACTIVATION FONCTION COMMENTAIRE Réveille le scanner du mode de veille En alternative, le scanner peut être réveillé par : - déplacement d'un objet à travers la zone de balayage. - un changement de poids sur la balance. - Lecture avec un scanner auxiliaire attaché Augmente le volume Pressez le bouton-poussoir momentanément pour augmenter le volume du haut-parleur. Après avoir atteint le volume le plus élevé, une pression répétée du bouton-poussoir reporte progressivement le volume au niveau le plus bas, le volume augmente ensuite en fonction des pressions successives. Cinq niveaux de volume sont disponibles. Augmente la tonalité Pressez le bouton-poussoir pendant approximativement 2 secondes, puis relâchez. A chaque pression, l'avertisseur retentira selon une des trois tonalités. Arrêtez lorsque la tonalité désirée (élevée, moyenne ou faible) est obtenue. 4 secondes Mode de diagnostic du scannera Ce mode permet au personnel chargé de l'assistance du système de remédier aux problèmes du scanner. Les diagnostics sont généralement lancés après la notification d'une alarme du module interchangeable (voir Tableau 1). Débranchez et rebranchez l'alimentation pour sortir du mode diagnostic. 8 secondes Remet le scanner à l'état initiab Seul le personnel chargé de l'assistance du système est autorisé à exécuter la remise à l'état initial. Momentané (lorsque le scanner est en mode de veille) Momentané (lorsque le scanner est en mode d'éveil) Maintenez la touche enfoncée et relâchezla lorsque l'avertisseur sonore retentit a. Par défaut, cette fonction est neutralisée pour empêcher l'activation accidentelle par des utilisateurs. b. Les utilisateurs ne devraient pas procéder à la remise à l'état initial du scanner sauf sous la direction de personnel agréé chargé de l'assistance des systèmes. Quick Reference Guide 7 Fonctions des voyant DEL Vert Le voyant DEL vert (Figure 4d) indique l'état du scanner au Tableau 4 ci-dessous. Tableau 4. Green LED Indications LED INDICATION Scanner Actifa DURATION Voyant DEL vert en mode veille fixe (Mode normal) Lecture correcte de l'indication Voyant DEL vert - clignotement lumineux a Indication du mode programme Voyant DEL vert - Clignotement continu Indication du mode de veille Le voyant DEL vert clignote lentement Système invalide Alarme de module interchangeable(Mode d'erreur) Indication de module interchangeable 1 seconde éteint, 1/10è de seconde allumé Signal sonore bas 1 seconde. Voyant DEL vert/jaune alternatif clignote de manière continue. Le voyant DEL vert clignote selon une séquence codée en combinaison avec le haut-parleur. COMMENT Le scanner est prêt à fonctionner. Le balayage est immédiatement disponible. Indique la lecture et le décodage du code à barres. Indique que le scanner est en mode de programmation Étiquette. Débranchez et rebranchez l'alimentation pour sortir du mode de programmation. Le moteur du scanner et/ou le laser sont mis automatiquement hors tension et l'unité passe en mode de veille à cause de l'inactivité prolongée. Système invalide scanner. Indique qu'une erreur fatale du module interchangeable a été détectée. UNIQUEMENT au cas où le bouton Volume/tonalité serait activé suite à une alarme d’un module interchangeable. Ceci permet aux techniciens d'identifier les défaillances du module interchangeable. a. Il est possible de sélectionner certaines fonctions des voyants DEL vert et jaune afin de les activer ou désactiver. Il n'est pas possible de programmer votre scanner pour afficher toutes les indications. 8 Magellan® 2300HS/2300HSΩ Einleitung Diese Anleitung bietet eine Zusammenfassung der grundlegenden Scanner-Bedienung für neue Benutzer. Systemmanager, Installations- und anderes technisches Personal finden Informationen zu Installation, Programmierung und weitere Angaben im Produktreferenzhandbuch. Aktuelle Änderungen der Publikationen finden Sie auf der Datalogic-Homepage; diese können Sie drucken und herunterladen. Die Internet-Adresse finden Sie auf der Rückseite dieses Handbuchs. Gedruckte Handbücher können Sie auch bei Ihrem Händler/Vertreter bestellen. Anschliessen Abbildung 5 zeigt die Scanner-Anschlüsse und ihre Funktionen. Abbildung 5. Anschlüsse EAS Opening Scanner Host EAS-Anschluß · Elektronische Artikelüberwachung (EAS) Anschluß Anschluß an diesen Port ist optional Quick Reference Guide POS-Terminal Aux. Port Power Zusätzlicher Port Stromversorgung · Test-Port · Kennsatzdaten · Gleichstrom· Applikations-Download · On Screen Programming (OSP) Brickeingang · Applikations-Download (falls zutreffend) · Eingang für RS-232 Handheld Scanner · Zusätzlicher RS-232 KennsatzDatenausgang Anschluß an diesen Port ist optional 9 Bedienung Scannen von Produkten Der Scanner wird so installiert, dass das Scanfenster mit der Ladentheke bündig ist. So erhält man eine maximale Arbeitsfläche, und der Benutzer kann die Artikel über diese Oberfläche schieben, ohne sie greifen oder aufheben zu müssen. Barcodes werden leicht gescannt, wenn sie durch die von dem großen Scanfenster projizierte Zone bewegt werden (siehe Abbildung 6a). BEACHTEN SIE Ausrichten der Barcode-Aufkleber in Scanrichtung oder zum Scanfenster erhöht die Scanrate. Der Pfeil auf der oberen Abdeckung des Scanners zeigt die Richtung an, in der die Artikel bewegt werden sollten (siehe Abbildung 6b). Mit Hilfe der FirstStrikeTM Decodierungssoftware kann der Scanner die meisten schwer lesbaren Codes schnell und ohne übermäßige Ausrichtung lesen. Abbildung 6. Bedienung des Scanner a ArtikelBarcode Artikel werden an dem Scanner vorbeigeschoben b Scan-Volumen Warenfluß d Lautstärke/Tonschalter Scanner c 10 Grüne LED Magellan® 2300HS/2300HSΩ Lautstärke/Tonschalter BEACHTEN SIE Änderungen der Lautstärke, die über die Drucktaste "Volume/Tone" erfolgt sind, werden beim Herunterfahren des Scanners gelöscht, und es erfolgt ein Zurücksetzen auf die Werkseinstellungen. Eine dauerhafte Änderung der Lautstärke kann mit Hilfe der speziellen Programmierkenndaten im Produktreferenzhandbuch vorgenommen werden. Tabelle 5. Lautstärke/Tonschalter-Funktionen Betätigungsdauer Funktion Bemerkung versetzt den Scanner vom Bereitschafts- in den Betriebsmodus Der Scanner kann in den Bereitschaftsmodus versetzt werden entweder durch: - Bewegen eines Objektes durch den Scanbereich - eine Gewichtsänderung auf der Waage - Scannen mit einem extern angeschlossenen Handscanner kurz (wenn sich der Scanner im Betriebsmodus befindet) Erhöhung der Lautstärke Durch kurzzeitiges Betätigen des Schalters wird die Lautstärke erhöht. Wenn die höchste Stufe erreicht ist, wird durch erneutes Betätigen die Lautstärke auf die niedrigste Stufe zurückgesetzt. Danach steigt die Lautstärke wieder an. Fünf Lautstärken können eingestellt werden. Halten und beim Hören des Signals Erhöhung der Tonhöhe Betätigen Sie den Schalter für ca. 2 Sekunden und lassen Sie ihn dann los. Dadurch können die drei möglichen Tonhöhen (hoch, mittel und tief) eingestellt werden. 4 Sekunden Scannerdiagnosemodusa Dieser Modus erlaubt dem technischen Personal die Identifikation von Problemen, die beim Scanner aufgetreten sind. Drücken Sie den Schalter für 8 Sekunden oder schalten Sie zum Verlassen des Scannerdiagnosemodus' den Scanner aus und ein und starten den Scanner neu. 8 Sekunden Scanner-Resetb Nur das technische Personal sollte einen Reset durchführen. kurz (wenn der Scanner im Bereitschaftsmodus ist) a. In der Standardeinstellung ist diese Funktion ausgeschaltet, um versehentliche Aktivierung durch den Benutzer vorzubeugen. b. Anwender sollten keinen Scanner-Reset durchführen außer unter der Anweisung ausgebildeten Servicepersonals. Quick Reference Guide 11 Grüne LED Funktionen Tabelle 6. Grüne LED Funktionen LED Anzeige Scanner ist aktiva Dauer Die Grüne Anzeige ist dauerhaft an und leuchtet schwach (Normalmodus) Optisches Signal, das erfolgreiches Scannen anzeigta Programmiermodusanzeige Bereitschaftsmodusanzeige Host außer Betrieb Hardwarefehlerwarnung (Fehlermodus) HardwarefehlerAnzeige (FehlerModus) Grüne Anzeige - helles Aufblinken Grüne Anzeige - wiederholtes Blinken Die grüne LED-Anzeige blinkt im 2Sekunden-Takt. 1 Sekunde aus, eine zehntel Sekunde an Akustischer tiefer Ton 1 Sekunde und die grüne/gelbe Anzeige blinkt fortwährend Grüne Anzeige blinkt in einer kodierten Sequenz zusammen mit dem Lautsprecher. Bemerkung Der Scanner ist betriebsbereit. Scannen ist sofort möglich. Zeigt das erfolgreiche Lesen und Decodieren eines Barcodes an. Zeigt an, daß sich der Scanner im Barcode-Programmiermodus befindet. Zum Verlassen des Programmiermodus schalten Sie aus und ein. Der Scanner- oder Lasermotor hat sich nach längerer Nichtbenutzung automatisch abgeschaltet und ist in den Bereitschaftsmodus übergegangen.. Host ermöglicht kein Scannen. Zeigt an, daß ein schwerer Hardwarefehler entdeckt wurde. Tritt NUR auf, wenn der Lautstärke/Tonknopf betätigt wurde und eine Hardwarefehlerwarnung auftritt. Diese Anzeige ermöglicht dem Techniker, den Hardwarefehler zu identifizieren.. a. Bestimmte LED-Funktionen können wahlweise aktiviert oder deaktiviert werden. 12 Magellan® 2300HS/2300HSΩ Introduzione Questa guida offre un sommario delle operazioni principali dello scanner per utenti inesperti. Installatori, amministratori di sistema e altro personale tecnico possono trovare informazioni sull'installazione, programmazione ed altre questioni avanzate nella guida di riferimento del prodotto. Revisioni aggiornate delle pubblicazioni possono essere visualizzate, stampate e scaricate dal sito web Datalogic indicato sulla copertina posteriore di questo manuale. È possibile anche ordinare i manuali su carta dal proprio rivenditore/distributore. Connessione Per comodità, la Figura 7 mostra le connessioni dello scanner e le relative funzioni. Figura 7. Connessioni EAS Opening Scanner Host Connessione EAS · Sistemi per la sorveglianza elettronica antitaccheggio Connessione La connessione su questa porta è opzionale Quick Reference Guide Terminale POS · Dati etichetta · Download dell'applicazione (dove appropriato) Aux. Port Power Porta ausiliaria Accensione · Porta di controllo · Ingresso Brick CC · Programmazione su schermo (OSP) · Download applicazione · Ingresso RS-232 per il lettore palmare · Uscita ausiliaria RS-232 dati etichetta La connessione su questa porta è opzionale 13 Funzionamento Utilizzo dello scanner Lo scanner è montato in modo che la sua finestra di scansione si trovi sullo stesso livello del piano di lavoro. Ciò mantiene libero il più possibile il piano di lavoro e consente anche all'utente di spingere gli articoli sulla sua superficie senza doverli afferrare o raccogliere. I codici a barre sono scansiti facilmente facendoli passare nella zona di proiezione della finestra di scansione reale come mostrato in Figura 8a. NOTA Affacciando le etichette con il codice a barre nella direzione della scansione, o verso la finestra di scansione, si ottimizzerà la velocità di lettura. La freccia posta sullo schermo superiore dello scanner indica la direzione in cui far muovere gli articoli da scansire (vedere Figura 8b). Con il software di decodifica FirstStrikeTM, lo scanner può leggere anche i codici più difficili da interpretare in modo rapido e senza bisogno di orientare eccessivamente l'articolo. Figura 8. Funzionamento dello scanner a Codice a barre dell'articolo Gli articoli sono spinti o fatti scivolare oltre lo scanner b V Volume di sscansionee Direzione del prodotto d Tasto tono/volume Scanner c 14 LED verde Magellan® 2300HS/2300HSΩ Tasto tono/volume Il tasto tono/volume svolge molteplici funzioni in base alla durata della pressione esercitata: Le variazioni di volume effettuate con l'interruttore a pulsante Volume/ Tono sono annullate con lo spegnimento dello scanner e quindi impostate nuovamente nel modo predefinito. Se si vuole modificare permanentemente il volume, utilizzare le speciali etichette di programmazione illustrate nella guida di riferimento del prodotto. NOTA Tabella 7. Funzioni del Tasto tono/volume DURATA FUNZIONE NOTA Risveglia lo scanner dalla modalità Sleep In alternativa, lo scanner può essere riattivato: - Muovendo un oggetto nell'area di scansione. - Cambiando il peso sulla bilancia. - Effettuando una scansione con uno scanner ausiliario collegato Aumenta il volume Premere brevemente il pulsante per aumentare di un livello il volume dell'altoparlante. Una volta raggiunto il livello massimo, premendo nuovamente il pulsante si torna al livello minimo di volume. Sono disponibili cinque livelli di volume. Aumenta il tono Tenere premuto il pulsante per circa 2 secondi, quindi rilasciarlo. Ogni volta che si effettua questa operazione si cambia il tono con cui viene emesso il segnale acustico. Ripetere l'operazione fino ad impostare il tono desiderato tra quelli disponibili (alto, medio, basso). Tenere premuto per 4 secondi Modalità diagnostica scannera Questa modalità consente al personale del servizio di assistenza di identificare le anomalie rilevate sullo scanner. Normalmente, tale modalità viene utilizzata dopo una segnalazione di guasto FRU (Field Replaceable Unit) (vedi Tabella 1). Premere ripetutamente il tasto power per uscire dalla modalità diagnostica. Tenere premuto per 8 secondi Reinizializzazione dello scannerb La reinizializzazione (reset) dello scanner deve essere effettuata solo dal personale del servizio di assistenza. Momentanea (con scanner in modalità Sleep) Momentanea (con scanner operativo) Tenere premuto fino all'emissione del segnale acustico a. Tramite i parametri standard questa funzione è normalmente disabilitata per prevenire l'attivazione accidentale da parte dell'utilizzatore. b. L'utente non deve mai effettuare la reinizializzazione dello scanner a meno che non venga esplicitamente richiesto dal personale del servizio di assistenza. Quick Reference Guide 15 LED Verde Tabella 8. Funzioni dei LED verde SIGNIFICATO DURATA NOTA Scanner attivoaa LED verde acceso (intensità media) Lo scanner è pronto per l'utilizzo. Funzione di scansione immediatamente disponibile. LED verde acceso (intensità max) Segnala l'avvenuta lettura e decodifica di un codice a barre. (Modalità normale) Segnalazione di corretta letturaa Segnalazione modalità programmazione Segnalazione modalità Sleep Host disabilitata Anomalia FRU (Field Replaceable Unit) (modalità di errore) LED verde - lampeggio continuo LED verde - lampeggio lento 1 secondo spento, 1/10 secondo acceso Tono basso udibile della durata di 1 secondo. Lampeggio continuo e alternato del LED verde/giallo. Il LED verde lampeggia con una sequenza codificata in abbinamento ad un segnale acustic. Indicazione FRU Segnala che lo scanner è in modalità di programmazione. Premere ripetutamente il tasto power per uscire da tale modalità. Il motore e/o il laser dello scanner si sono spenti automaticamente e l'unità è passata in modalità Sleep per inattività prolungata. L'host ha disabilitato la scansione. Segnala che è stato rilevato un guasto critico FRU. Si verifica SOLO quando si preme il tasto tono/volume dopo una segnalazione FRU. Consente al tecnico riparatore di identificare il guasto FRU. a. È possibile abilitare o disabilitare alcune funzioni del LED. 16 Magellan® 2300HS/2300HSΩ Introducción Esta guía presenta un resumen de la operación básica del escáner para quienes lo utilizan por primera vez. Los instaladores, administradores de sistema y demás personal técnico pueden consultar la Guía de referencia del producto para obtener detalles de instalación, programación y otra información avanzada. El sitio web de Datalogic, cuya dirección figura en la contratapa de este manual, contiene diferentes publicaciones actualizadas al momento, que se pueden ver, imprimir y descargar. También se le pueden solicitar copias de los manuales impresos en papel a los representantes o distribuidores de Datalogic. Conexión Para mayor conveniencia, la Figura 9 muestra las conexiones del escáner y sus respectivas funciones. Figura 9. Conexiones EAS Opening Scanner Host Conexión de sistema electrónico para vigilancia de mercancías · Sistema electrónico para vigilancia de mercancías Conexión La conexión a este puerto es opcional Quick Reference Guide Terminal de Punto de venta · Datos de etiquetas · Descarga de aplicaciones (cuando corresponda) Aux. Port Power Puerto auxiliar Alimentación · Puerto de prueba · Entrada para · Programación en pantalla (PEP) corriente directa · Descarga de aplicaciones en formato "brick" · Entrada RS-232 para escáner manual · Salida auxiliar RS-232 para datos de etiquetas La conexión a este puerto es opcional 17 Funcionamiento Escaneo de objetos El escáner está colocado de manera tal que la ventana de escaneado quede a nivel del mostrador. Ello hace posible liberar el máximo espacio de trabajo disponible y permite que el usuario deslice los productos sobre la superficie del escáner sin tener que tomarlos ni levantarlos. Los códigos de barra se leen sin esfuerzo cuando se los pasa por la zona que se proyecta desde la ventana principal de lectura, tal como lo muestra la Figura 10a. Colocar las etiquetas con el código de barras en la dirección de la lectura, o hacia la ventana de escaneado, optimizará el ritmo del proceso. La flecha que aparece en la tapa superior del escáner indica la dirección en que se deben pasar los productos que se deseen escanear (ver Figura 2b). NOTA Con el software de decodificación FirstStrikeTM, el escáner puede leer rápidamente la mayoría de los códigos que son de difícil lectura, sin necesidad de maniobrar demasiado la mercancía. Figura 10. Operación del escáner a Código de barra del producto Se pasan o se deslizan las mercancías frente al escáner b Campo de lectura Flujo do productos d Botón pulsador Tono/Volumen Escáner c 18 Indicador luminoso verde Magellan® 2300HS/2300HSΩ Botón pulsador Tono/Volumen Los cambios realizados en el volumen mediante el botón pulsador para Volumen / Tono se pierden cuando se apaga el escáner y, cuando se lo vuelve a encender, se recuperan los valores preestablecidos. Si usted desea modificar el volumen de modo permanente, emplee las etiquetas de programación especial que figuran en la Guía de referencia del producto. NOTA Tabla 9. Funciones del Botón pulsador Volumen/Tono PRESIÓN DEL BOTÓN FUNCIÓN COMENTARIO Despierta al escáner del Modo de ahorro de energía También se puede despertar el escáner: -Moviendo un objeto a través de la zona de escaneo. -Pesando un artículo en la balanza. -Escaneando con un escáner auxiliar conectado a este escáner Incrementa el volumen Presione el botón pulsador momentáneamente para aumentar el volumen del parlante. Una vez alcanzado el volumen máximo, volverá a oírse el volumen más bajo cuando se presione el botón otra vez, y luego el volumen irá subiendo con cada pulsación del botón. Hay cinco niveles de volumen. Aumenta el tono Presione el botón pulsador durante aproximadamente 2 segundos y luego suéltelo. Cada vez que haga esto, se oirán diferentes tonos (alto, medio o bajo). Deténgase cuando haya oído el tono deseado. 4 segundos Modo de diagnóstico del escánera ste modo le permite al personal de mantenimiento del sistema identificar los problemas que pudiese tener el escáner. Por lo general, el diagnóstico se inicia cuando se ha detectado una advertencia FRU (Unidad reemplazable de campo) (vea la Tabla 1). Presione el botón de encendido para salir del Modo de diagnóstico del escáner. 8 segundos Reinicia el escánerb Esta operación debería ser realizada sólo por personal de mantenimiento del sistema. Momentánea (cuando el escáner está en Modo de ahorro de energía) Momentánea (cuando el escáner está activo) Mantener el botón presionado y luego soltarlo cuando se escucha el tono a. Por default, esta función es deshabilitada para prevenir activación accidental por el usuario. b. Los usuarios no deberían reiniciar el escáner a menos que se reciba tal instrucción del personal capacitado en mantenimiento del sistema. Quick Reference Guide 19 Funciones de el indicador luminoso verde Tabla 10. Funciones de el indicador luminoso verde SIGNIFICADO DEL INDICADOR Escáner activoa DURACIÓN Indicador luminoso verde constante y tenue (Modo normal) Lectura correctaa Modo de programación Modo de ahorro de energía Terminal incapacitado Advertencia de Unidad reemplazable de campo (FRU, en inglés) (Modo de error) Unidad reemplazable de campo, FRU Indicador luminoso verde con parpadeo brillante Indicador luminoso verde con parpadeo continuo Indicador luminoso verde con parpadeo lento COMENTARIO El escáner está listo para operar. Se puede escanear inmediatamente. Indica que se ha leído y decodificado un código de barras. Indica que el escáner se encuentra en Modo de programación de etiqueta. Presione el botón de encendido para salir del Modo de programación. El motor del escáner y/o el láser se apagaron de manera automática y la unidad ingresó en el Modo de ahorro de energía debido a que ha estado inactiva durante un período extenso. 1 segundo apagado, 1/10 segundos prendido Terminal tiene lector incapacitador. Tono audible bajo 1 segundo. Los indicadores luminosos verde y amarillo parpadean continuamente en forma alternada. Indica que se ha detectado una falla FRU fatal. El indicador luminoso verde parpadea siguiendo una secuencia codificada en forma conjunta con el parlante. Ocurre SÓLO si se presiona el botón de Volumen/Tono después de haberse recibido una advertencia de error FRU. Permite a los técnicos identificar las fallas FRU. a. Algunas funciones del indicador luminoso son opcionales, por lo que se pueden activar o desactivar. 20 Magellan® 2300HS/2300HSΩ Introdução Esta guia oferece um sumário de operações básicas do leitor para principiantes.O Instalador, administradores de sistema e outro pessoal técnico podem encontar programação, instalação, e informações avançadas adicionais no Guia de Referência do Produto. Revisões atualizadas das publicações podem ser visualizadas, impressas e baixadas (download) do website da Datalogic, que está escrito atrás da capa deste manual. Manuais impressos podem também ser requisitados ao seu revendedor/distribuidor. Conexão Para a sua comodidade a Figura 11 mostra as conexões do scarnner e as suas funções. Figura 11. Conexões EAS Opening Scanner Host Conexão EAS · Conexão para o sistema de Vigilância Eletrônica de Artigos Conexão com esta porta é opcional Quick Reference Guide Terminal POS · Legenda dos Dados · Uso do Download (onde apropriada) Aux. Port Power Porta Auxiliar · Porta de Teste · Programação (OSP) · Uso do Download · Entrada RS-232 para pistolas · Saída Auxiliar RS-232 Informações de Leitura Energia · Entrada de Energia C.C. Conexão com esta porta é opcional 21 Operação Para usar seu leitor O leitor está inserido no balcão, desta forma a sua janela de leitura abrange a área de trabalho. Isto permite um máximo espaço de trabalho, e também permite ao usuário deslizar os artigos, sobre a sua superfície,sem ter que pegá-los ou levantálos. Os códigos de barras são lidos sem esforço quando passados pela zona projetada na janela de leitura, conforme indicado na Figura 12a. Observação Colocando as etiquetas com os códigos de barra para cima,na direção do leitor, ou em direção da janela de leitura se otimiza o ritmo de leitura. A flecha localizada na tampa do leitor indica a direção na qual deve mover os artigos (ver Figura 12b). Com o programa de decodificação FirstStrikeTM, o leitor pode ler mais rapidamente os códigos difíceis de se ler e sem excessiva orientação Figura 12. Uso do Leitor a Código de Barras do Artigo Os artigos são deslizados ou empurrados perto do scanner b Volume de Leitura Fluxo do produto d Botão de Volume/Tonalidade Leitor c 22 LED verde Magellan® 2300HS/2300HSΩ Botão de Volume/Tonalidade O Botão de Volume/Tonalidade também executa multíplas funções, dependendo da duração que o mesmo foi pressionado: As mudanças de intensidade feitas usando o Botão de Volume/Tonalidade são perdidas quando o leitor é desligado e volta para configuração de instalação. Se você deseja mudar o volume de forma permanente, use as etiquetas de programação da Guia de Referência do Produto. Observação Tabella 11. Funções do Botão de Volume/Tonalidade PRESSÃO NO BOTÃO FUNÇÃO OBSERVAÇÃO Retira o leitor do Modo de Repouso Alternativamente, o leitor pode ser desperto por: - Passando algum objecto pela zona de leitura. - Uma troca de peso na balança. - Fazendo uma leitura com uma pistola auxiliar conectada ao leitor. Incrementa o volume Pressione momentáriamente o botão para aumentar o volume do alto-falante. Qunado o volume mais alto for alcançado, pressionando o botão irá retornar o volume para o nível mais baixo, aumentando a cada pressão no botão. Cinco níveis de volume estão disponíveis. Incrementa o Tom Pressione o botão por aproximadamente 2 segundos e depois solte. Cda vez que isto é efetuado, emitirá um sinal sonoro em um dos três tons. Pare quando tiver o tom desejado (alto, médio, baixo). 4 Segundos Modo de Diagnóstico da Leitora Este modo permite que o pessoal da assistência técnica possa detectar problemas com a balança. Pressione o botão por 8 segundos, ou desligue/ligue a energia para sair do Modo de Diagnóstico do Leitor e reinicializar o leitor. 8 Segundos Reinicializa o Leitorrb Sómente pessoal da assistência técnica deve executar a reinicialização. Momentária (quando o leitor está em repouso) Momentária (quando o leitor está ativo) Aperte, e depois solte quando emitir o sinal sonoro a. Pelo default de fábrica, esta função está normalmente desabilitada de forma a prevenir uma acidental ativação pelos usuários.. b. Usuários não devem executar a reinicialização do leitor, excepto sob instruções por pessoal treinado da assistência técnica. Quick Reference Guide 23 Funções do LED Verde Tabella 12. Funções do LED Verde INDICAÇÃO Leitor Ativoa DURAÇÃO LED Verde aceso e meio-aceso O leitor está pronto para ser operado. Leitura está disponível de imediato. LED Verde - piscando forte Indica a leitura de um código de barras e sua decodificação. (Modo Normal) Indicação de Boa Leituraa Indicação de Modo de Programação Indicação de Modo de Repouso Terminal Desabilitado Field Replaceable Unit (FRU) Advertência(Modo de Erro) LED Verde - pisca continuamente LED Verde - pisca lentamente 1 segundo apagado, 1/10 de segundo aceso Tom baixo audível 1 segundo. Pisca de forma continua e alternada os LEDs Verde e Amarelo LED Verde - pisca uma determinada sequencia em conjunto com o alto-falante. Indicação de FRU OBSERVAÇÃO Indica que o leitor está em Modo de Programação por Etiquetas. Reclica a energia para sair do Modo de Programação. O motor e/ou laser do leitor se apaga automaticamente e a unidade entra em Modo de Repouso devido a um longo período de inatividade. Terminal desabilitou a leitura. Avisa de uma falha fatal detectada em um FRU. Ocorre SOMENTE pressionando o botão de Volume depois que recebeu uma advertência de FRU. Permite que a assistência técnica possa identificar falha no equipamento. a. Algumas funções do LED podem ser selecionadas para serem habilitadas ou desabilitadas. 24 Magellan® 2300HS/2300HSΩ 简介该指南向第一次使用扫描器的用户概要介绍扫描器的基本操作。安装人员、系统管理员和其他技术人员可以在《产品参考手册》中找到有关安装、编程和更高级的信息。此手册以及该产品的其他手册在随扫描器所带的手册 CD 中都有。有关这些出版物的最新修改可以从 Datalogic 网站上浏览、打印和下载，该网址在本手册的封底上可以找到。您还可以从经销商 / 分销商那里订购印刷好的手册。连接为了方便您了解，图 13 中介绍了扫描器连接及各部分的功能。图 13. 连接快速用户指南 25 操作扫描物品扫描器是嵌入到工作台面里的且与工作台平齐，这样不仅可以节约工作空间，用户在使用时也只需将商品在工作台上滑过 , 而不必抓拿商品或将其拿起来。当将商品从图 14a 中所示的扫描窗口所投射出的扫描区扫过的时候，扫描器可以毫不费力地将条码读取。将条码标签顺着扫描方向或者对着扫描窗口可以达到最佳扫描速度。扫描器顶盖上的箭头表示扫描商品时应当将商品移动的方向 ( 见图 14b)。注意由于采纳了 FirstStrikeTM 解码软件，扫描器可以快速读取最难读取的条码，且不需要更多调整物品方位。图 14. 操作扫描器 26 Magellan® 2300HS 音量 / 音调按钮根据按下按钮时间的不同，音量 / 音调按钮 ( 图 14d —可以通过卸下扫描器顶盖 [ 图 14c] 来操作 ) 有多项功能：当将扫描器关机后，使用音量 / 音调按钮对音量的修改会丢失，并恢复到原来设定的状态。如果您想永久性地改变音量，请使用《产品指南》中的特殊编程标签。注意表 13. 音量 / 音调按钮的功能按钮时间功能注解将扫描器唤醒另外，还可以通过以下方式唤醒扫描器： - 移动一件物品通过扫描区。 - 用辅助扫描器进行扫描。提高音量瞬间按下按钮可以提高扬声器的音量。当扬声器到达最大音量时，继续按下按钮会使音量回到最低，接着再按则会使音量逐步提高。音量有 4 个等级。提高音调按下按钮大约 2 秒钟，然后释放。每次这样做，蜂鸣器会以三种声调中的一种发出声音。当听到想要的声调（高、中、低）时停止按按钮。 4 秒扫描器诊断模式a 这种模式下系统支持人员可以对扫描器进行问题诊断。按下该按钮 8 秒钟或者关机后重新开机，可以退出扫描器诊断模式和重新设置扫描器。 8 秒重新设置扫描器b 只有系统支持人员才能对扫描器进行重新设置。瞬间 ( 当扫描器处于休眠状态时 ) 瞬间 ( 当扫描器处于活动状态时 ) 按下按钮，当听到扬声器嘟声后释放 a. 牖玷崴叾钐趣啡昧脌观葦鞌董€啠曼潭瓈嗭虮惏箖弲天彐偠偷€粒 b. 除非有受过训练的系统支持人员的指导，用户不能对扫描器进行重新设置。快速用户指南 27 绿色指示灯绿色指示灯 ( 图 14d) 所表示的扫描器状态如下表所列：表 14. 绿色指示灯指示表示内容扫描器处于活动状态a ( 正常模式 ) 读取正确 a 编程模式休眠模式主机禁用现场可换部件 (FRU) 警告 ( 故障模式 ) 持续时间扫描器绿色指示灯连续发光且灯光暗淡扫描器绿色指示灯亮闪一次扫描器绿色指示灯连续闪烁绿色指示灯每两秒闪烁一次扫描器指示灯 1 秒钟关， 1/10 秒亮发出低音调声响 1 秒钟。指示灯连续闪烁。扫描器绿色指示灯连续闪烁，与扬声器的报警声交替回应。 FRU 指示注解扫描器准备就绪，可以随时工作。表明条码已被读取和解码。表明扫描器处在标签编程模式。关机后再开机可以退出该模式。由于长时间闲置，扫描器马达和 / 或激光器已经自动关闭，系统进入休眠模式。主机禁止扫描。表示发现致命的 FRU 故障。请给系统支持人员打电话寻求帮助。只有当按下音量 / 音调按钮后出现 FRU 警告时才会出现。请维修技术人员查找 FRU 故障。 a. 您可以选择启动或禁用指示灯的某些功能，但扫描器可能不会显示所有的指示。 28 Magellan® 2300HS Appendix A — Product Labeling IEC CLASS 1 LASER PRODUCT Class IIa Laser Product. Avoid long term viewing of direct laser light. Appareil á laser de classe IIa. Eviter toute exposition prolongée de la vue à lumière laser directe. XXXXXXXXXXXX Product of USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. n tio ed or uc od Pr nit mo Sa te fe st ty ed U THIS LASER PRODUCT COMPLIES WITH 21CFR 1040 AS APPLICABLE AS A CLASS IIA PRODUCT This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe A est confirme à la norme NMB-003 du Canada. PRODUCT SERVICE NRTL S N263 CAUTION - CLASS 3R LASER RADIATION WHEN OPEN. AVOID DIRECT EYE EXPOSURE. COVERED BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 4,709,195 4,709,369 4,712,853 4,749,879 4,786,798 4,792,666 4,798,943 4,799,164 4,816,660 4,861,972 4,861,973 4,866,257 4,868,836 4,879,456 4,963,719 4,991,692 5,144,118 5,179,270 5,198,649 5,247,162 5,229,588 5,410,108 5,459,308 5,440,110 5,475,207 5,493,108 5,705,802 5,723,852 5,834,708 EAS Opening Scanner Host Aux. Port Power Labels are shown here to illustrate their location only. Please view the labels on your product for actual details. NOTE Power Supply Models require either a Listed class II or class III with a Limited Power Source (LPS). For the safety certification to be valid, class III input power sources must be IEC/EN60950-1 (EN 60335-series, EN 60065 or relevant) approved. Input: 100 - 240 VAC Max. Current: 2.0 A Quick Reference Guide Output: 9 - 10 VDC Max. Power: 20 W 29 Appendix B — Productivity Index Reporting Option Productivity Index Reporting™ Option. Your scanner may be equipped with the optional Productivity Index Reporting™ feature. This feature allows for data collection on the readability index of bar codes scanned by the scanner. This data may be transmitted to the POS Terminal where it may be easily sorted for action by the MIS department to improve bar code quality at the front end. For additional information on how to enable Productivity Index Reporting in your scanner, please refer to the Product Reference Guide (PRG) Option "Productivity Index Reporting™". Votre scanner peut être équipé de l'option "Productivity Index Reporting™" qui permet la collecte de données sur l'index de lecture des codes à barres scannés. Ces données peuvent être transmises vers le Terminal POS où elles pourront être facilement exploitables par le service informatique afin d'améliorer la qualité du code à barres en rayon. Pour plus d'informations sur la manière d'activer PIR sur vos scanners, merci de vous reporter au Product Reference Guide (PRG). Productivity Index Reporting™ Option. Ihr scanner kann optional mit der Funktion Productivity Index Reporting™ ausgestattet werden. Diese Funktion sammelt Daten zur Lesbarkeit von Barcodes. Diese Daten können ans POS Terminal übermittelt werden. Dort können die Daten durch die MIS Abteilung zur Verbesserung der Barcodequalität sortiert werden. Für weitere Informationen, wie Sie das Productivity Index Reporting in Ihrem Scanner aktivieren können, entnehmen Sie dem Product Reference Guide (PRG). Opzione Indice di Produttività. Il scanner può essere fornito con l'opzione Productivity Index Reporting™ . Quest'opzione permette il controllo della qualità dei barcode letti dello scanner. Questi dati possono essere trasmessi al POS dove possono essere facilmente analizzati dai sistemi informativi per migliorare la qualità dei barcode stessi. Per maggiori informazioni su come abilitare il Productivity Index Reporting nel Scanner far riferimento al Product Reference Guide (PRG). 30 Magellan® 2300HS/2300HSΩ Opcion de Productivity Index Reporting. Su escaner puede ser epuipado con el opcional Indice de Productivity Index Reporting™. Esta funcion permite colectar datos en el indice de la lectura de los codigos de barras por el escaner. Estos datos pueden ser transmitidos a la Terminal POS donde puede ser facilmente clasificado por el departamento de MIS para meforar la calidad de el codigo de barra en la parte frontera. Para informacion adicional en como abilitar su escaner con el Indice de Productividad Reportada, por favor referirse a la Guia de Referencia de el Producto (PRG). Opção de Informe de Índice de Produtividade (Productivity Index ReportingTM). O seu scanner pode estar equipado com a opção do Informe de Índice de Produtividade. Esta opção permite coletar o dado do índice de leitura dos códigos de barras lidos pelo scanner. Este dado pode ser transmitido para o terminal PDV, aonde pode ser fácilmente depurado para ações pelo Departamento de Sistemas para melhorar a qualidade dos códigos de barras na frente de caixas. Para informações adicionais ou como habilitar o Informe do Índice de Produtividade em seu scanner, por favor consultar o Guia de Referência do Produto (PRG Product Reference Guide). Quick Reference Guide 31 Appendix C — Laser Safety International Caution Statements Class I English This scanner is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1:2001. Class I and Class IIa products are not considered to be hazardous. The scanner contains internally a Visible Laser Diode (VLD) whose emissions do not exceed the maximum limits as set forth in the above regulations. The scanner is designed so that there is no human access to harmful laser light during normal operation, user maintenance or during prescribed service operations. CAUTION • • • French Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light. Do not attempt to open or otherwise service any component in the optics cavity. Opening or servicing any part of the optics cavity by unauthorized personnel may violate laser safety regulations. The optics system is a factory only repair item. Use of optical instruments with the scanner will increase eye hazard. Optical instruments include binoculars, microscopes and magnifying glasses. This does not include eye glasses worn by the user. Ce scanner est certifié conforme à la norme DHHS/CDRH 21CFR sous-chapitre J et à la norme IEC 825-1:2001. Les produits de classe I et de classe II ne sont pas considérés dangereux. Le scanner contient une diode laser visible (VLD) dont les émissions ne dépassent pas les limites prescrites dans les normes précitées. Le scanneur est conçu de façon à ce qu’il ne soit pas possible d’accéder à la lumière laser pendant l’utilisation normale, l’entretien par l’utilisateur et les fonctions de maintenance prescrites. ATTENTION • • • German L’utilisation de procédures de contrôle, réglage ou utilisation autres que celles spécifiées dans ce document peut entraîner une exposition dangereuse à la lumière du laser. Ne pas essayer d’ouvrir ni de réparer les composants de la cavité optique. L’ouverture ou la réparation d’une partie de la cavité optique par une personne non qualifiée peut entraîner la violation des règles de sécurité relatives au laser. Le système optique ne peut être réparé qu’en usine. Sont considérés comme instruments optiques les jumelles, les microscopes et les loupes. Les lunettes portées par l'utilisateur ne sont pas considérées comme tel. Dieser Scanner ist den in den Vereinigten Staaten geltenden Vorschriften des DHHS/CDRH 21 CFR Subchapter J und den Vorschriften der IEC 825-1:2001 entsprechend bescheinigt. Produkte der Klasse I oder der Klasse II sind als ungefährlich eingestuft. Im Inneren des Scanners befindet sich eine VLD (Visible Laser Diode), deren Ausstrahlung die in den oben genannten Vorschriften angeführten Höchstgrenzen nicht überschreitet. Die Konstruktion des Scanners garantiert, daß bei normalem Betrieb, bei Wartung durch den Benutzer oder im Laufe planmäßiger Wartungsarbeiten kein Zugang zu schädlichem Laserlicht besteht. VORSICHT • • • Italian Jegliche Anwendung von Streuungen, Reglern oder anderen Verfahren, die nicht in diesen Ausführungen erwähnt werden, können eine gefährliche Laserlichtbestrahlung zur Folge haben. Das optische System darf nur vom Werk repariert werden. Das Öffnen oder Warten von Bestandteilen des optischen Hohlraums durch unbefugtes Personal verletzt die Laser-Sicherheitsbestimmungen. Der Gebrauch von optischen Instrumenten zusammen mit dem Scanner steigert die Gefahr der Augenschädigung. Zu optischen Instrumenten gehören Ferngläser, Mikroskope und Lupen, aber nicht vom Benutzer getragene Brillengläser. È stato certificato che questo scanner si conforma ai requisiti della sezione J della normativa DHHS/CDRH 21CFR, e anche ai requisiti di IEC 825-1:2001. I prodotti di Classe I o Classe II non sono considerati pericolosi. Lo scanner contiene al suo interno un Visible Laser Diode (VLD), diodo laser visibile, le cui emissioni non eccedono i limiti stabiliti dalle normative sunnominate. Lo scanner è progettato in modo che non ci sia alcun accesso alla luce dannosa del laser nel corso di uso normale, di manutenzione da parte dell’utente o durante la manutenzione periodica stabilita. 32 Magellan® 2300HS/2300HSΩ ATTENZIONE • • • Danish l’uso di comandi o di procedure diversi da quelli specificati in questa sede possono causare l’esposizione ad una luce laser pericolosa. evitare di tentare di aprire o riparare dei componenti nella cavità ottica. L’apertura o la riparazione della cavità ottica da parte di persone non autorizzate può essere in violazione dei regolamenti di sicurezza relativi all’impiego di raggi laser. Il sistema ottico può essere riparato soltanto in fabbrica. l’impiego di strumenti ottici assieme al lettore fa aumentare il rischio di danni alla vista. Il termine “strumenti ottici” sta ad indicare binocoli, microscopi o lenti d’ingrandimento, ma esclude eventuali occhiali da vista indossati dall’utilizzatore. Denne scanner opfylder de amerikanske krav stillet i "DHHS/CDRH 21CFR Subchapter J" og opfylder også de krav, der stilles i IEC 825-1:2001. Klasse I eller klasse II produkter anses for at være sikre. Scanneren indeholder en Visible Laser Diode (VLD), der ikke overskrider maksimumgrænserne, som beskrevet i ovenstående reglement. Scanneren er konstrueret, så der ikke er nogen menneskelig kontakt medskadelige niveauer af laserbestråling under normal brug, normal vedligeholdelse eller under foreskrevet servicering. ADVARSEL • • • Dutch Udførsel af eftersyn eller justeringer eller anvendelse af andre procedurer end foreskrevet i vejledningen, kan medføre at man udsættes for skadeligt laser lys. Forsøg ikke at åbne eller på anden vis udføre service på komponenter i det optiske hulrum. Uautoriseret åbning eller service af dele af det optiske hulrum, kan betyde overtrædelse af Laser sikkerheds regulativerne. Det optiske system må kun repareres af fabrikken. Brug af optiske instrumenter med scanneren vil forøge faren for øjenbeskadigelser. Optiske instrumenter indbefatter kikkerter, mikroskoper og forstørrelsesglas. Det indbefatter ikke briller båret af brugeren. Deze scanner is in de V.S. goedgekeurd en voldoet aan de vereisten van DHHS/CDRH 21CFR Subchapter J een aan de vereisten van IEC 825-1:2001. Producten van klasse I (Class I) en klasse II (Class II) worden niet geacht gevaarlijk te zijn. De scanner bevat een inwendige Visible Laser Diode (VLD) waarvan de emissies de maximumgrenzen van bovenstaande reglementen niet overschrijden. De scanner is zo ontworpen dat men bij normaal gebruik, onderhoud of tijdens het uitvoeren van de voorgeschreven onderhoudswerkzaamheden niet aan schadelijke niveaus wordt blootgesteld. WAARSCHUWING • • • Swedish Men kan aan gevaarlijk laserlicht worden blootgesteld als de apparaten niet goed worden bediend of afgesteld, of als de procedures niet worden uitgevoerd zoals hierin beschreven staat. Probeer niet om onderdelen in de opticaruimte te openen of er op enige wijze onderhoud aan uit te voeren. Openen of onderhoud van onderdelen van de opticaruimte door onbevoegd personeel kan in strijd zijn met de laserveiligheidsreglementen. Het opticasysteem mag alleen in de fabriek worden gerepareerd. Gebruik van optische instrumenten met de scanner vergroot het gevaar dat de ogen aan schadelijke niveaus van laserlicht worden blootgesteld. Optische instrumenten zijn onder meer verrekijkers, microscopen en vergrootglazen. Zo de gebruiker een bril draagt, valt die niet onder optische instrumenten. Denna scanner uppfyller de amerikanska kraven DHHS/CDRH 21CFR Subchapter J samt kraven i IEC 825-1:2001. Produkter i Klass I (Class I) och Klass II (Class II) anses ej farliga. Scannern är utrustad med en intern, synlig laserdiod (Visible Laser Diode - VLD) vars emission inte överstiger max. värdena i ova stående säkerhetsföreskrifter. Scannern har konstruerats så att personer vid normal användning, bruksunderhåll och föreskriven service inte utsätts för skadlig laserstrålning. VARNING • • • Quick Reference Guide Om apparaten används på annat sätt än som specificerats i denna bruksanvisning kan användaren utsättas för farlig laserstrålning. Försök inte öppna eller reparera komponenter i den optiska kammaren. Om icke auktoriserad personal öppnar eller reparerar delar i den optiska kammaren, kan detta vara ett brott mot säkerhetstföreskrifterna för laserutrustning. Det optiska systemet får endast repareras i fabriken. Om optiska instrument används tillsammans med scannern ökar risken för ögonskador. Optiska instrument omfattar kikare, mikroskop och förstoringsglas. Glasögon som bärs av användaren omfattas ej av detta. 33 Finnish Tämä tutkain on hyväksytty Yhdysvalloissa vastaamaan DHHS/CDRH 21CFR Subchapter J luokka II ja 825-1:2001 IEC-vaatimuksia. Luokka I tai Luokka II tuotteiden ei katsota olevan vaarallisia. Tutkain sisältää sisäisen näkyvän laserdiodin (Visible Laser Diode (VLD), jonka päästöt eivät ylitä yllä olevien säädösten asettamia maksimirajoja. Tutkain on suunniteltu siten, etteivät ihmiset altistu vaaralliselle lasersäteilylle normaalikäytön, käyttäjän suorittaman huollon tai ohjeiden mukaisten huoltotoimenpiteiden aikana. VAROITUS • • • Norwegian Laitteen käyttö tai sääto muuten kuin näiden ohjeiden mukaan, voi aiheuttaa vaarallista laservaloa. Älä yritä avata tai muuten huoltaa mitään komponentteja optisessa osassa. Mikäli epäpätevä henkilö korjaa tai avaa jonkin komponentin optisessa osassa, voidaan tämän katsoa olevan rikkomus turvallisuusohjeita vastaan. Optinen systeemi on osa, joka voidaan korjata ainoastaan tehtaaalla. Optisten laitteiden käyttö tutkaimen kanssa lisää silmien vaaraa. Optisiin laitteisiin kuuluu mm. kiikarit, mikroskoopit ja suurennuslasit. Käyttäjän silmälasit eivät kuulu näihin laitteisiin. Denne skanneren er godkjent i USA i samsvar med retningslinjene for DHHS/CDRH 21CFR, avsnitt J, og til IEC-kravene 825-1:2001. Produkter i klasse I eller klasse II ansees ikke som helsefarlige. Skanneren inneholder en innvendig, synlig laserdiode (VLD, Visible Laser Diode), som ikke overskrider maksimalgrensene som er fastsatt i retningslinjene ovenfor. Skanneren er konstruert, slik at personer ikke utsettes for farlige doser med laserstråler ved normal drift, brukers vedlikehold eller ved foreskrevet service. ADVARSEL • • • Portuguese Bruk av kontroller eller justeringer, eller utføring av andre prosedyrer enn de som er spesifisert her, kan føre til at man utsettes for livsfarlige laserstråler. Forsøk ikke å åpne eller på annen måte reparere komponenter i det optiske kammeret. Ingen del av det optiske kammeret må åpnes eller repareres av ikke-autorisert personale, da dette kan krenke forskrifter for sikker bruk av laserstråler. Det optiske systemet kan bare repareres på fabrikken. Bruk av optiske instrumenter sammen med skanneren øker mulighetene for øyenskade. Optiske instrumenter, omfatter kikkert, mikroskop og forstørrelsesglass. Vanlige briller regnes ikke med i denne kategorien. Este scanner foi certificado nos EUA para atender os requisitos do subcapítulo J do DHHS/CDRH 21 CFR e os requisitos do IEC 8251:2001. Os produtos da Classe I ou Classe II não são considerados perigosos. O scanner contém internamente um Diodo de Laser Visível (VLD Visible Laser Diode) cujas emissões não ultrapassam os limites definidos nos regulamentos mencionados acima. O scanner foi projetado de maneira que não exista acesso humano à luz de laser nociva durante a operação normal, manutenção pelo usuário ou durante as operações recomendadas de serviço. CUIDADO • • • Spanish O uso de quaisquer controles, ajustes ou procedimentos além dos aqui especificados pode resultar em exposição perigosa à luz laser. Não tente abrir a cavidade ótica nem consertar, de forma alguma, qualquer de seus componentes. A abertura da cavidade ótica, ou o conserto de qualquer uma de suas peças por pessoal não autorizado poderá violar as normas de segurança do sistema de laser. O sistema ótico só poderá ser consertado pelo fabricante. O uso de instrumentos óticos com o scanner aumenta o perigo aos olhos. Instrumentos óticos incluem binóculos, microscópios e lentes de aumento. Estes não incluem os óculos do próprio usuário. Este escáner está certificado en los EE.UU. porque reúne los requisitos DHHS/CDRH 21CFR Sección J y los requisitos de IEC 8251:2001. Los productos de Clase I o Clase II no se consideran como peligrosos. El escáner tiene en su interior un Diodo Láser Visible (VLD) cuyas emisiones no exceden los límites máximos fijados en los reglamentos mencionados anteriormente. El escáner está diseñado de modo que las personas no tengan acceso a la luz láser peligrosa durante la operación normal, el mantenimiento por parte del usuario o durante las operaciones de servicio prescritas. PRECAUCIÓN • • • 34 el uso de controles o ajustes o la ejecución de procedimientos diferentes de los aquí especificados puede dar lugar a luz láser peligrosa. no trate de abrir o prestar servicio en forma alguna a ningún componente en la cavidad óptica. La apertura o reparación de cualquier parte de la cavidad óptica por personal no autorizado puede infringir las regulaciones de seguridad láser. El sistema óptico se puede reparar únicamente en la fábrica. el uso de instrumentos ópticos junto con el escáner, incrementará el daño visual. Los instrumentos ópticos incluyen los prismáticos, microscopios y lentes de aumento. Éstos no incluyen las gafas que lleve el usuario. Magellan® 2300HS/2300HSΩ Chinese Japanese Quick Reference Guide 35 Hebrew 36 Magellan® 2300HS/2300HSΩ NOTES Quick Reference Guide 37 Appendix D — Warranty Warranty Datalogic warrants to Customer that this product will be free from defects in materials and workmanship for a period of 1 year from product shipment. In order to obtain service under this Warranty, Customer must notify Datalogic of the claimed defect before the expiration of the Warranty period and obtain from Datalogic a return authorization number for return of the product to designated Datalogic service center. If Datalogic determines Customer’s claim is valid, Datalogic will repair or replace product without additional charge for parts and labor. Customer shall be responsible for packaging and shipping the product to the designated Datalogic service center, with shipping charges prepaid. Datalogic shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Datalogic service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations. Warranty is subject to the limitations and exclusions set forth in the paragraphs that follow. WARRANTY SET FORTH ABOVE IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS. Exclusions Warranty coverage shall not apply to any claimed defect, failure or damage which Datalogic determines was caused by: abuse, neglect, improper use of product; failure to provide product maintenance, including but not limited to cleaning of the display in accordance with product reference guide; installation or service of product by other than Datalogic representatives; use of product with any other instrument, equipment or apparatus; modification or alteration of product or units with Warranty Void labels that have been tampered with. External cables and replacement of upper window/cartridge due to scratching, stains or other degradation will not be covered under the Warranty. External power supplies returned for service must be accompanied by the original product for performance of service. Returned products that Datalogic Inc. has determined are not covered by Warranty, will be charged Datalogic Inc. standard repair rates then in effect for repair of product. Replacement of display due to scratching, stains or other degradation will not be covered under Warranty. If a product is determined to be not repairable customer will be notified and product may be returned to customer at their request. A minimum repair fee may be charged. Limitation of Liability DATALOGIC's REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCT AS SET FORTH ABOVE IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY ON ACCOUNT OF CLAIMS OF BREACH OF WARRANTY OR PRODUCT DEFECT. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL INDIRECT, SPECIAL OR CONTINGENT DAMAGES REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. Assignment Customer may not assign or otherwise transfer its rights or obligations under Warranty except to a purchaser or transferee of product. No attempted assignment or transfer in violation of this provision shall be valid or binding upon Datalogic. Risk of Loss Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall assume risk of loss or damage for product in Datalogic's possession or product being returned to Customer by Datalogic, except such loss or damage as may be caused by the negligence of Customer, its agents or employees. In the absence of specific written instructions for the return of product to Customer, Datalogic will select the carrier, but Datalogic shall not thereby assume any liability in connection with the return shipment. 38 Magellan® 2300HS/2300HSΩ NOTES Quick Reference Guide 39 NOTES 40 Magellan® 2300HS/2300HSΩ DECLARATION OF CONFORMITY Datalogic hereby declares that the Equipment specified below has been tested and found compliant to the following Directives and Standards: Directives: EMC 89/336/EEC Low Voltage 73/23/EEC Standards: EN55022-B:2001 - Generic Emissions CISPR 22-B:2001 - Generic Emissions EN50082-1:1998 - Generic Immunity - Light Industry EN55024:2001 - Generic Immunity - ITE EN60950:2000 - ITE Safety EN60825-1/A2:2001 - Laser Safety EN61000-3-2:2000 - Harmonic Current EN61000-3-3:1994 - Voltage Fluctuation/Flicker Equipment Type: Barcode Scanning Equipment Products: Magellan 2200VS and 2300HS Placed into EU Service: April 2007 under the Datalogic trademark. Nov. 2003 under the PSC trademark. Responsible Datalogic Scanning, Inc. 959 Terry St. Eugene, OR USA Manufacturer: Australia Japan Datalogic Scanning Pty Ltd North Ryde, Australia Telephone: [61] (2) 9870 3200 Fax: [61] (2) 9878 8688 Datalogic Scanning KK Shinagawa, Tokyo, Japan Telephone: 81 (0)3 3491 6761 Fax: 81 (0)3 3491 6656 France and Benelux Latin America Datalogic Scanning Sarl LES ULIS Cedex, France Telephone: [33].01.64.86.71.00 Fax: [33].01.64 46.72.44 Datalogic Scanning, Inc Miami, Florida, USA Telephone: (305) 591-3222 Fax: (305) 591-3007 Germany Spain and Portugal Datalogic Scanning GmbH Darmstadt, Germany Telephone: 49 (0) 61 51/93 58-0 Fax: 49 (0) 61 51/93 58 58 Datalogic Scanning Sarl Sucursal en España Madrid, Spain Telephone: 34 91 746 28 60 Fax: 34 91 742 35 33 Italy Datalogic Scanning SpA Vimercate (MI), Italy Telephone: [39] (0) 39/62903.1 Fax: [39] (0) 39/6859496 United Kingdom Datalogic Scanning LTD Watford, England Telephone: 44 (0) 1923 809500 Fax: 44 (0) 1923 809 505 www.scanning.datalogic.com Datalogic Scanning, Inc. 959 Terry Street Eugene, OR 97402 Telephone: (541) 683-5700 Fax: (541) 345-7140 ©2002-2007 Datalogic Scanning, Inc. R44-2753 (Rev. A) 5/07