BCS BladeRunner 90 El manual del propietario

  • ¡Hola! Soy un chatbot de IA específicamente entrenado para ayudarte con el BCS BladeRunner 90 El manual del propietario. He revisado el documento y puedo ayudarte a encontrar la información que necesitas o explicarla de manera clara y sencilla. ¡Pregunta lo que necesites!
MADE IN ITALY
MANUALE D’USO E MANUTENZIONE
INSTRUCTION BOOK
MANUEL D’UTILISATION
MANUAL DE USO Y MANTENIMIENTO
BEDIENUNGS UND WARTUNGSHANDBUCH
90103097
10.2016
Codice
Code
Codigo
Kodezahl
Edizione
Edition
Edición
Ausgabe
• Trinciaerba
• Heavy duty mower
• Broyeur
• Desbrozadora
• Mulchgerät
BladeRunner 60 / 75 / 90 / 110
RollerBlade 75 / 90
950_BladeRunner ManualeUsoManutenzione.indd 2 12/01/2017 09:13:13
2
REGISTRAZIONE DATI MACCHINA (BR)_P1 10-16 rev. 0
REGISTRAZIONE DATI MACCHINA
IT
IT
Il manuale rappresenta la gamma di macchine elencate in
copertina. Al fine di facilitare la ricerca di ricambi e di altre
informazioni della macchina acquistata è necessario regi-
strare alcuni dati. Si prega di scrivere quanto richiesto nei
riquadri a fianco:
A) Modello di macchina
B) Numero di serie della macchina
C) Numero di serie del motore (se presente)
D) Nome del rivenditore dove è stata acquistata
E) Indirizzo del rivenditore
F) Numero di telefono del rivenditore
G) Data di acquisto della macchina
RECORDING DATA MACHINE
EN
EN
The manual is for the range of machines indicated on the
front cover. With the scope to facilitate the search of the
spare parts and maintain information of the bought machi-
ne, is necessary to record some data. Please write the re-
quested data inside the squares to side:
A) Model of machine
B) Serial number of the machine
C) Serial number of the engine (if indicated)
D) Name of the dealer where bought the machine
E) Address of the dealer
F) Phone number of the dealer
G) Date of the bought machine
ENREGISTREMENT DES DONNEES DE LA MACHINE
FR
FR
Le manuel représente la gamme de machines figurant sur
la couverture. Afin de faciliter la recherche des pièces de
rechange et d’autres informations concernant la machine
achetée il faut enregistrer certaines données. Veuillez écri-
re ce qui est demandé dans les cases sur le côté:
A) Modèle de la machine
B) Numéro de série de la machine
C) Numéro de série du moteur (si présent)
D) Nom du revendeur où la machine a été achetée
E) Adresse du revendeur
F) Numéro de téléphone du revendeur
G) Date d’achat de la machine
REGISTRO DATOS MÁQUINA
ES
ES
El manual representa la gama de máquina indicadas en la
cubierta. Para facilitar la búsqueda de recambios y de ma-
yor información sobre la máquina adquirida, es necesario
registrar algunos datos. Se ruega escriban todo lo solicita-
do en los recuadros de al lado:
A) Modelo de máquina
B) Número de serie de la máquina
C) Número de serie del motor (si es indicado)
D) Nombre del vendedor autorizado donde se adquirió
E) Dirección del vendedor autorizado
F) Número de teléfono del vendedor
G) Fecha de compra de la máquina
REGISTRIERUNG DER GERÄTEDATEN
DE
DE
Das Handbuch stellt den Bereich der auf dem Cover auf-
geführten Maschinen. Um die Suche nach Ersatzteilen und
anderen Informationen der Maschine, die Sie kaufen Sie
einige Daten aufzeichnen müssen zu erleichtern. Bitte
schreiben Sie, was in den Kisten auf der rechten benötigt:
A) Gerätemodell
B) Gerätenummer
C) Seriennummer des Motors (sofern vorhanden)
D) Name des Händlers, bei dem das Gerät gekauft wurde
E) Anschrift des Händlers
F) Telefonnummer des Händlers
G) Kaufdatum des Geräts
A
..................................................................................
..................................................................................
B
..................................................................................
..................................................................................
C
..................................................................................
..................................................................................
D
..................................................................................
..................................................................................
E
..................................................................................
..................................................................................
F
..................................................................................
..................................................................................
G
..................................................................................
..................................................................................
3
INDICE (BR)_P1 10-16 rev. 0
INDICE
Copertina fronte-manuale
Marchio e modelli macchine rappresentate
Codice ed edizione manuale d'uso
IT
IT
Registrazione dati macchina
Indice
0. Introduzione
1. Simbologia e avvertenze per la sicurezza
1.1 Simbologia
1.2 Avvertenze
2. Identificazione e adesivi
2.1 Targhetta d’identificazione
2.2 Adesivi macchina
2.3 Mantenimento degli adesivi
Pag. 2
" 3
" 6
" 8
" 8
" 11
" 17
" 17
" 18
" 19
3. Caratteristiche tecniche
4. Messa in funzione della macchina
4.1 Apertura della scatola
4.2 Verifiche preliminari
4.3 Assemblaggio
5. Identificazione comandi e dispositivi
6. Istruzioni d’uso
6.1 Formazione operatore
6.2 Controlli prima di avviare la macchina
6.3 Regolazione altezza di lavoro e manubrio
6.4 Tipologie di coltelli e orientamento
7. Montaggio al gruppo motore
8. Prova di funzionamento
Pag. 21
" 22
" 22
" 22
" 22
" 24
" 28
" 28
" 29
" 29
" 31
" 33
" 34
INDEX
Front-cover of manual
Mark and models of machine represented
Code and edition of the user manual
EN
EN
Recording data machine
Index
0. Introduction
1. Safety symbols and warnings
1.1 Symbols
1.2 Warnings
2. Identification and stickers
2.1 Identification plate
2.2 Labels of the machine
2.3 Preservation of the labels
Page 2
" 3
" 6
" 8
" 8
" 11
" 17
" 17
" 18
" 19
3. Technical features
4. Setting up of the machine
4.1 Opening the crate
4.2 Preliminary checks
4.3 Assembly
5. Identifying controls and devices
6. Instruction for use
6.1 Operator training
6.2 Checks prior to starting the machine
6.3 Adjusting working height and handlebar
6.4 Type of cutting blades and orientation
7. Assembly to the motor unit
8. Operational test
Page 21
" 22
" 22
" 22
" 22
" 24
" 28
" 28
" 29
" 29
" 31
" 33
" 34
INDEX
Couverture frontale du manuel
Marque et modèles des machines représentées
Code et édition du manuel d’utilisation
FR
FR
Enregistrement des données de la machine
Index
0. Introduction
1. Symboles et avertissements de sécurité
1.1 Symboles
1.2 Avertissements
2. Identification et adhésifs
2.1 Plaque d’idéntification
2.2 Adhésifs de la machine
2.3 Maintenance des adhésifs
Page 2
" 3
" 6
" 8
" 8
" 11
" 17
" 17
" 18
" 19
3. Caractéristiques techniques
4. Mise en fonction de la machine
4.1 Ouverture de la casse
4.2 Contrôles préliminaires
4.3 Montage
5. Identification commandes et dispositifs
6. Instructions d’utilisation
6.1 Formation de l’opérateur
6.2 Contrôles avant de faire démarrer la machine
6.3 Réglage de la hauteur de travail et le guidon
6.4 Typologie de couteaux et orientation
7. Montage au groupe moteur
8. Essai de fonctionnement
Page 21
" 22
" 22
" 22
" 22
" 24
" 28
" 28
" 29
" 29
" 31
" 33
" 34
INDICE
Cubierta frente-manual
Marca y modelos máquinas representadas
Códi
g
o
y
edición manual de us
o
ES
ES
Registro datos máquina
Indice
0. Introducción
1. Simbología y advertencias de seguridad
1.1 Simbología
1.2 Advertencias
2. Identificación y adhesivos
2.1 Placa de identificación
2.2 Adhesivos máquina
2.3 Mantenimiento de los adhesivos
Pag. 2
" 3
" 6
" 8
" 8
" 11
" 17
" 17
" 18
" 19
3. Características técnicas
4. Puesta en funcionamiento máquina
4.1 Apertura de la caja
4.2 Controles previos
4.3 Montaje
5. Identificación mandos y dispositivos
6. Instrucciones de uso
6.1 Formación operador
6.2 Controles antes de poner en marcha la máquina
6.3 Ajuste de la altura de trabajo y el manillar
6.4 Tipo de cuchillas y orientaci
ón
7. Montaje en el grupo motor
8. Prueba de funcionamiento
Pag. 21
" 22
" 22
" 22
" 22
" 24
" 28
" 28
" 29
" 29
" 31
" 33
" 34
INHALT
Titelseite der Betriebsanleitung
Marke und Modell der dargestellten Geräte
Codenummer und Aus
g
abe der Anleitun
g
DE
IT
Registrierung der Gerätedaten
Inhalt
0. Einführung
1. Symbolik und Sicherheitshinweise
1.1 Symbolik
1.2 Hinweise
2. Identifizierung und Aufkleber
2.1 Typenschild
2.2 Aufkleber
2.3 Erhaltung der Aufkleber
Seite 2
" 3
" 6
" 8
" 8
" 11
" 17
" 17
" 18
" 19
3. Technische Merkmale
4. Inbetriebnahme des Geräts
4.1 Verschlag öffnen
4.2 Kontrollen im Vorfeld
4.3 Montage
5. Identifizierung Steuerungen und Einrichtungen
6. Gebrauchsanweisung
6.1 Einweisung der Bedienperson
6.2 Vor Einschaltung des Maschine prüfen
6.3 Arbeitshöhe einstellen und Lenker
6.4 Art der Messer und Ausrichtung
7. Montage an das Motoraggregat
8. Betriebsprüfung
Seite 21
" 22
" 22
" 22
" 22
" 24
" 28
" 28
" 29
" 29
" 31
" 33
" 34
4
INDICE (BR)_P2 10-16 rev. 0
INDICE
IT
17. Attrezzi ed accessori applicabili
17.1 Bilanciamento macchina
17.2 Rullo posteriore per BladeRunner
17.3 Kit coltelli dritti
17.4 Kit coltelli a pala
18. Garanzia
19. Materiale di consumo
20. Ricambi, come ordinare
Pag. 44
" 45
" 45
" 45
" 45
" 46
" 46
" 47
IT
9. Informazioni utili
9.1 Generalità
10. Pulizia
11. Rimessaggio e inattività prolungata
12. Movimentazione e trasporto
13. Manutenzione e lubrificazione
13.1 Lubrificazione
13.2 Sostituzione coltelli
13.3 Regolazione cinghie
14. Inconvenienti, cause e rimedi
15. Tutela dell'acquirente
15.1 Dichiarazioni di consegna / garanzia e CE
16. Assistenza
Pag. 35
" 35
" 36
" 36
" 37
" 37
" 38
" 39
" 39
" 40
" 42
" 42
" 44
Copertina retro-manuale
Costruttore e Loghi del gruppo
Indirizzo Costruttore
Telefono, fax, e-mail e indirizzo URL
INDEX
EN
17. Applicable accessories and equipments
17.1 Balancing machine
17.2 BladeRunner rear roller
17.3 Straight cutting tool kit
17.4 Shovel cutting tool kit
18. Warranty
19. Consumables
20. Spare parts, how to order
Page 44
" 45
" 45
" 45
" 45
" 46
" 46
" 47
EN
9. Useful information
9.1 General information
10. Cleaning
11. Storage and prolonged inactivity
12. Movement and transport
13. Maintenance and lubrication
13.1 Lubrication
13.2 Knives replacement
13.3 Belt adjustment
14. Problems, causes, solutions
15. Consumer protection
15.1 Delivery declarations / warranty and EC
16. Assistance
Page 35
" 35
" 36
" 36
" 37
" 37
" 38
" 39
" 39
" 40
" 42
" 42
" 44
Rear cover of manual
Manufacturer and logos of the group
Manufacturer's address
Phone no., fax no, e-mail, URL address
INDEX
FR
17. Outils et accessoires à ajouter
17.1 Équilibrage de la machine
17.2 Rouleau postérieur pour BladeRunner
17.3 Kit couteaux droits
17.4 Kit couteaux à pelle
18. Garantie
19. Matériel de consommation
20. Pièces de rechange, comment commander
Page 44
" 45
" 45
" 45
" 45
" 46
" 46
" 47
FR
9. Informations utiles
9.1 Généralité
10. Nettoyage
11. Hivernage et inactivité prolongée
12. Déplacement et transport
13. Entretien et lubrification
13.1 Lubrification
13.2 Replacement des couteaux
13.3 Réglage courroies
14. Inconvénients, causes et solutions
15. Protection de l'acheteur
15.1 Déclarations de livraison / garantie et CE
16. Assistance
Page 35
" 35
" 36
" 36
" 37
" 37
" 38
" 39
" 39
" 40
" 42
" 42
" 44
Couverture arrière du manuel
Constructeur et lieux du groupe
Adresse du Constructeur
Téléphone, fax, e-mail et adresse URL
INDICE
ES
17. Aperos y accesorios aplicables
17.1 Equilibrado máquina
17.2 Rodillo posterior para BladeRunner
17.3 Kit cuchillas rectas
17.4 Kit cuchillas de pala
18. Garantia
19. Material de consumo
20. Recambios, como pedir
Pag. 44
" 45
" 45
" 45
" 45
" 46
" 46
" 47
ES
9. Información útil
9.1 Generalidades
10. Limpieza
11. Deposito y inactividad prolongada
12. Manejo y transporte
13. Mantenimiento y lubricación
13.1 Lubrificación
13.2 Sustitución cuchillas
13.3 Regulación correas
14. Problemas, causas y remedios
15. Tutela del comprador
15.1 Declaraciones de entrega / garantía y CE
16. Asistencia
Pag. 35
" 35
" 36
" 36
" 37
" 37
" 38
" 39
" 39
" 40
" 42
" 42
" 44
Cubierta parte trasera -manual
Fabricante y logotipos del grupo
Dirección fabricante
Teléfono, fax, correo electrónico y dirección URL
INHALT
DE
17. Anwendbare Geräte und Zubehör
17.1 Ordnungsgemäße Gewichtsverteilung des
Gerätes
17.2 Hinterrolle für BladeRunner
17.3 Satz gerader Messer
17.4 Satz Schaufelmesser
18. Garantie
19. Verschleissmaterial
20. Ersatzteile, Bestellung
Seite 44
" 45
" 45
" 45
" 45
" 46
" 46
" 47
DE
9. Nutzliche hinweise
9.1 Allgemeines
10. Reinigung
11. Einlagerung und langerer
12. Verlagerung und Transport
13. Wartung und Schmierung
13.1 Schmieren
13.2 Messerersatz
13.3 Riemeneinstellung
14. Störungen, Ursache und Abhilfe
15. Käuferschutz
15.1 Lieferungs- / Garantieerklarung und CE-
Deklaration
16. Kundendienst
Seite 35
" 35
" 36
" 36
" 37
" 37
" 38
" 39
" 39
" 40
" 42
" 42
" 44
Rückseite der Betriebsanleitung
Hersteller und Firmenlogos der Gruppe
Herstelleranschrift
Telefon- und Faxnummer, E-Mail-Adresse und URL
6
0. INTRODUZIONE (BR)_P1 10-16 rev. 0
0. INTRODUZIONE
IT
IT
Gentile cliente,
ci complimentiamo per la scelta effettuata che, dal momen-
to dell’acquisto e per la vita della macchina, le garantirà
l’assistenza post-vendita e la collaborazione che da sem-
pre contraddistinguono il nostro marchio.
Questa pubblicazione l’aiuterà a conoscere meglio la mac-
china e se verrà utilizzata seguendo queste istruzioni le
durerà molti anni e le sarà di prezioso aiuto per svolgere i
lavori di manutenzione.
Le raccomandiamo pertanto di leggere attentamente que-
ste pagine e di seguirne sempre i consigli.
Il trinciaerba è un attrezzo professionale applicato frontal-
mente, specifico per motocoltivatori; può essere applicato
anche alle motofalciatrici.
Serve per mantenere puliti da erbacce quei terreni che non
necessitano di un taglio perfettamente rasato e della
raccolta (terreni scoscesi, terreni rustici, sottobosco ecc.).
Il presente attrezzo va utilizzato per l’uso specifico indicato
sopra e per cui è stato progettato. E’ vietato utilizzare il
trinciaerba per qualsiasi altro tipo d’uso se non riportato
per iscritto su questo manuale.
0. INTRODUCTION
EN
EN
Dear Customer,
thank you for your preference. Upon purchasing this pro-
duct, after-sales assistance is guaranteed for the life span
of the machine as well as the collaboration that has always
distinguished our brand.
This publication will help you to get to know the machine
better. If you follow these instructions the machine will last
for many years. This publication will prove invaluable when
carrying out maintenance work.
It is therefore recommended that you read these pages ca-
refully and always follow the advice given.
The flail mower is a professional tool frontally applied,
designed specifically for walking tractors but can also be
used with the mowing machines.
Used to keep clean from weeds those soils that do not re-
quire a perfectly shaved cutting and collection (steep ter-
rain, rustic terrains, underwood, etc..).
This tool should be used specifically as indicated above,
for the purpose for which it has been designed. It is strictly
forbidden to use this mulcher for any purpose other than
the use specified in this user manual.
0. INTRODUCTION
FR
FR
Cher client,
nous vous félicitons pour le choix effectué qui, dès l’achat
et pour la durée de vie de la machine, vous garantira l’as-
sistance après-vente et la collaboration qui, depuis tou-
jours, caractérisent notre marque.
Cette publication vous aidera à mieux connaître la machi-
ne et si elle sera utilisée selon ces instructions durera plu-
sieurs années et vous sera une aide précieuse pour effec-
tuer les travaux d’entretien.
Nous vous recommandons par conséquent de lire attenti-
vement ces pages et de toujours suivre les conseils don-
nés.
Le broyage d'herbe est un outil professionnel appliqué
frontalement, spécifique pour les motoculteurs; elle peut
être appliquée également sur les motofaucheuses.
Il est utilisé pour nettoyer des mauvaises herbes les sols
qui ne nécessitent pas une coupe parfaitement rasée et de
collection (terrain escarpé, terre rustique, sous-bois, etc.).
Cet outil est utilisé pour l’utilisation spécifique indiquée ci-
dessus et pour ce dont il a été projeté. Il est interdit d’uti-
liser le broyeur pour tout autre type d’utilisation qui n’est
pas reporté dans ce manuel.
0. INTRODUCCIÓN
ES
ES
Estimado cliente,
le agradecemos que haya escogido nuestro producto y le
comunicamos que, a partir del momento de la compra y
mientras dure la máquina, tendrá garantizada la asistencia
posventa y la colaboración que desde siempre ha caracte-
rizado nuestra marca.
Esta publicación le ayudará a conocer mejor la máquina y,
si la utiliza siguiendo estas instrucciones, durará muchos
años. Además, este manual será una valiosa ayuda para
realizar sus operaciones de mantenimiento.
Le recomendamos que lea atentamente estas páginas y
que siga siempre los consejos que incluye.
El destructor de hierba es una herramienta profesional que
se sitúa en la parte delantera. Es específica para moto-
cultivadores pero también puede colocarse en las motose-
gadoras.
Se utiliza para mantener limpio de malezas aquellos sue-
los que no requieren un corte perfectamente afeitada y de
colección (terreno escarpado, suelo rústico, sotobosque,
etc.).
Esta herramienta se utiliza para el uso específico indicado
arriba, que es para el que se ha ideado. Está prohibido
utilizar la trituradora de hierba para cualquier otro tipo de
uso si no está indicado por escrito en este manual.
0. EINFÜHRUNG
DE
DE
Verehrter Kunde,
wir beglückwünschen Sie zu Ihrer Wahl, denn durch den
Kauf sichern Sie sich für die ganze Lebenszeit des Gerä-
tes unseren After-Sales-Service und unsere Unterstützung
zu, die unser Haus seit jeher auszeichnen. Diese Anleitung
wird Ihnen helfen, Ihr Gerät besser kennen zu lernen;
wenn Sie ihr Gerät entsprechend vorliegenden Anweisun-
gen verwenden, werden Sie viele Jahre Freude daran ha-
ben; außerdem stellt die Anleitung eine wertvolle Hilfe bei
der Durchführung von Wartungsarbeiten dar. Lesen Sie
diese Seiten aufmerksam und beachten Sie stets alle darin
enthaltenen Ratschläge.
Das Mulchen Gras ist ein frontseitig angebrachtes,
professionelles Anbaugerät für Einachstraktoren; er kann
auch an Motormähern angebracht werden.
Es wird verwendet, von Unkraut sauber zu halten die
Böden, die keine Notwendigkeit für eine perfekte rasierte
haben und schneiden und Ernte (steiles Gelände,
rustikalen Land, Gestrüpp usw.).
Dieses Anbaugerät wird für den oben genannten spezi-
fischen Zweck, für den es entwickelt wurde, verwendet. Es
ist verboten, den Mulcher für andere Zwecke zu verwen-
den, als für die schriftlich in der vorliegenden Anweisung
angegebenen Anwendungen.
7
0. INTRODUZIONE (BR)_P2 10-16 rev. 0
0.
IT
IT
Il manuale contiene le istruzioni per l’uso e la manutenzio-
ne delle macchine modello BladeRunner e RollerBlade ed
è parte integrante della macchina. Si raccomanda ai vendi-
tori di macchine nuove e/o di seconda mano di prendere
atto che il manuale dovrà sempre essere fornito con la
macchina.
Eventuale copia dovrà essere richiesta al servizio tecnico
del Costruttore, il codice è 90103097. Se il manuale ha
contenuti poco chiari, siete pregati di contattare il Costrut-
tore; telefono, fax, e-mail sono indicati sulla copertina di
fondo.
Il presente manuale è conforme alla norma
ISO 3600.
Le macchine comprese in questo manuale
sono costruite in accordo con le normative
di sicurezza vigenti.
0.
EN
EN
The manual contains the instructions for the use and main-
tenance of the machines model BladeRunner and
RollerBlade, it is an integral part of the machine. It is
recommended that dealers of new and/or second-hand
machines to take note that the manual should always be
provided with the machine.
Any copy must be requested to the technical service of the
Manufacturer, the code is 90103097. If the manual has
unclear content, please contact the technical service of the
Manufacturer; phone no., fax no., e-mail are indicated on
the rear cover.
This manual is compliant with
ISO 3600.
The machines covered in this manual were
manufactured in accordance with the current
safety standard.
0.
FR
FR
Le manuel contient les instructions pour l’utilisation et l’en-
tretien des machines modèle BladeRunner et RollerBlade
et il est partie intégrante de la machine. On recommande
aux vendeurs de machines neuves et/ou d’occasion de
prendre note que le manuel devra toujours être livré avec
la machine.
Toute copie éventuelle devra être demandée au service te-
chnique du Constructeur, le code est 90103097. Si le ma-
nuel devait contenir des explications peu claires, veuillez
contacter le Constructeur, dont le téléphone, fax, e-mail
sont indiqués sur la couverture du fond.
Ce manuel est en conformité avec la norme
ISO 3600.
Les machines contenues dans ce manuel
sont construites en accord avec les normes
de sécurité actuelles.
0.
ES
ES
El manual contiene las instrucciones para el uso y mante-
nimiento de las máquinas modelo BladeRunner y
RollerBlade y es una parte inseparable de la máquina. Se
recomienda a los vendedores de máquinas nuevas y/o de
segunda mano que entreguen siempre un manual con la
máquina.
Se podrán solicitar más copias al servicio técnico del fa-
bricante, el código es 90103097. Si los contenidos del ma-
nual están poco claros, les rogamos que se pongan en
contacto con el fabricante; en la contracubierta están indi-
cados el teléfono, fax y correo electrónico.
Este manual está en conformidad con la norma
ISO 3600.
Las máquinas incluidas en este manual
están construidas de acuerdo con normas
de seguridad vigentes.
0.
DE
DE
Die vorliegende Betriebsanleitung enthält Gebrauchs- und
Wartungsanweisungen der Geräte Modell BladeRunner
und RollerBlade und ist wesentlicher Bestandteil des
Lieferumfangs. Wir erinnern alle Verkäufer von alten und /
oder gebrauchten Geräten daran, dass die Betriebsan-
leitung stets zusammen mit dem Gerät ausgehändigt
werden muss. Mögliche Kopien können beim technischen
Kundendienst des Herstellers angefordert werden, die
Bestellnummer ist 90103097. Falls die Anleitung
stellenweise nicht klar genug sein sollte, setzen Sie sich
bitte mit dem Hersteller in Verbindung; Telefon und
Faxnummer sowie E-Mail Adresse entnehmen Sie bitte der
Rückseite der vorliegenden Anleitung.
Dieses Handbuch ist in Übereinstimmung mit
ISO 3600.
Die Maschinen, auf die sich diese
Bedienungsanleitung bezieht, wurden
nach die aktuellen Sicherheitsstandards.
8
1. SIMBOLOGIA E AVVERTENZE PER LA SICUREZZA (BR)_P1 10-16 rev. 0
1. SIMBOLOGIA E AVVERTENZE PER LA SICUREZZA
1.1
MANUALE APERTO
Significa che dovete leggere attentamente il
manuale di uso e manutenzione.
In questo manuale e sulla macchina (fig.2/2) sono presenti
simboli con avvertenze per la sicurezza e l’uso della mac-
china.
1.1 Simbologia
DIVIETO, NON FARE ! Significa che non do-
vete assolutamente fare le operazioni ripor-
tate sotto questo simbolo, potrebbero com-
portare un pericolo mortale.
IT
IT
SIMBOLO DI PERICOLO
Indica importanti messaggi di sicurezza. Quan-
do vedete questo simbolo, fate attenzione al ri-
schio di lesioni; leggete attentamente il messag-
gio che segue e informate gli altri operatori.
NOTA - Serve per richiamare l’attenzione su
informazioni supplementari date su uno spe-
cifico argomento.
1. SAFETY SYMBOLS AND WARNINGS
1.1
MANUAL OPEN
This means that you must carefully read the
user and maintenance manual.
In this manual and on the machine (fig.2/2) there are sym-
bols with warnings pertaining to the safety and use of the
machine.
1.1 Symbols
NO! DO NOT DO! - this means that you must
absolutely not carry out the operations stated
below this symbol. It could involve a lethal
hazard.
EN
EN
SAFETY ALERT SYMBOL
This symbol indicates important safety messa-
ges. When you see this symbol, be alert to the
possibility of injury, carefully read the message
that follows, and inform other operators.
NOTE - Used to draw attention to additional
information given on a specific topic.
1. SYMBOLES ET AVERTISSEMENTS DE SECURITE
1.1
MANUEL OUVERT
Signifie que vous devez lire avec attention le
manuel d’utilisation et entretien.
A l’intérieur de ce manuel et sur la machine (fig.2/2), vous
trouverez des symboles avec des avertissements pour la
sécurité et l’utilisation de la machine.
1.1 Symboles
INTERDICTION, NE PAS FAIRE ! signifie
que vous ne devez absolument pas faire les
opérations indiquées par ce symbole, il pour-
rait comporter un risque mortel.
FR
FR
SYMBOLE DE DANGER
Il indique d’importants messages de sécurité.
Lorsque vous voyez ce symbole, faire attention
au risque de blessures, lire soigneusement le
message qui suit et informer les autres opéra-
teurs.
NOTE - Utilisé pour attirer l'attention sur des
informations complémentaires données sur
un sujet précis.
1. SIMBOLOGÍA Y ADVERTENCIAS DE SEGURIDAD
1.1
MANUAL ABIERTO
Significa que hay que leer atentamente el
manual de uso y mantenimiento.
Dentro de este manual y en la máquina (fig.2/2) existen
símbolos con advertencias para la seguridad y el uso de la
máquina.
1.1 Simbología
PROHIBICIÓN ¡NO HACERLO! - significa
que no se deben de ninguna manera realizar
las operaciones indicadas bajo este símbolo,
podría conllevar peligro de muerte.
ES
ES
SÍMBOLO DE PELIGRO
Indica importantes mensajes de seguridad.
Cuando vean este símbolo presten mucha aten-
ción ya que indica riesgo de lesiones. Lean
atentamente el mensaje que se indica e informe
a los demás operadores.
NOTA - Sirve para llamar la atención sobre
la información suplementaria dada sobre un
tema específico.
1. SYMBOLIK UND SICHERHEITSHINWEISE
1.1
OFFENES BUCH
Dieses Symbol weist auf ein aufmerksames
Lesen der Bedienungsanleitung hin.
In der vorliegenden Bedienungsanleitung und am Gerät
(Abb.2/2) sind Symbole angebracht, die auf Sicherheit und
Gebrauch des Gerätes hinweisen.
1.1 Symbolik
VERBOT! - Dieses Symbol bedeutet, dass
Sie die unter diesem Symbol beschriebenen
Vorgänge auf keinen Fall durchführen dürfen,
da Lebensgefahr droht.
DE
DE
GEFAHRENSYMBOL
Dieses verweist auf wichtige Sicherheitshinwei-
se. Wenn Sie dieses Symbol sehen, achten Sie
bitte auf Verletzungsgefahr; lesen Sie den fol-
genden Hinweis aufmerksam und informieren
Sie alle weiteren Mitarbeiter.
WICHTIG - Sie müssen besonders die Infor-
mationen, die folgt zu bezahlen.
9
1. SIMBOLOGIA E AVVERTENZE DI SICUREZZA (BR)_P2 10-16 rev. 0
1.1
IT
IT
IMPORTANTE - Dovete porre particolare atten-
zione all’informazione che segue.
Non riparare o lubrificare la macchina con orga-
ni in movimento o motore acceso.
Vietato fumare, accendere fiammiferi o fiamme,
lasciare fiamme libere o creare scintille.
Prestate particolare attenzione a non entrare in
contatto con parti surriscaldate del motore.
I gas di scarico possono causare malanni o
morte. Se è necessario mettere in moto il mo-
tore in uno spazio chiuso, usare una prolunga
tubo di scarico per far uscire il fumo. Lavorare in
una zona ben ventilata.
Attenzione! Non toccare mai pulegge o cinghie
in movimento, creano gravi danni alla persona.
Non fare manutenzione col motore in moto.
1.1
EN
EN
IMPORTANT - You must pay particular attention
to the next information.
Do not repair or lubricate the machine when the
parts are moving or the engine is on.
Don’t smoke. Don’t light matches or flames. Do
not leave naked flames around or make sparks.
Take special care not to touch hot parts of the
engine.
Engine exhaust fumes can cause sickness or
death. If it is necessary to run an engine in an
enclosed area, use an exhaust pipe extension
to remove the fumes. Always try to work in a
well ventilated area.
Caution! Never touch moving pulleys or belts.
They can be very dangerous. Never do main-
tenance with engine running.
1.1
FR
FR
IMPORTANT - Vous devez faire particulière-
ment attention à l’information qui suit.
Ne pas réparer ou lubrifier la machine avec des
organes en mouvement ou le moteur allumé.
Interdiction de fumer, d’allumer des allumettes
ou flammes, de laisser des flammes libres ou de
créer des étincelles.
Veiller tout particulièrement à ne pas toucher
des éléments surchauffés du moteur.
L’exhalation des gaz d’échappement peut être
cause d’intoxication ou mort. S’il est nécessaire
d’allumer le moteur à l’intérieur, appliquer au tu-
yau extensible pour permettre la sortie des gaz.
Il est toujours mieux de travailler en plein air.
Attention! Ne jamais toucher ni poulies ni cour-
roies en mouvement, elles peuvent provoquer
des accidents aux personnes. Ne pas faire l’en-
tretien quand le moteur est en marche.
1.1
ES
ES
IMPORTANTE - Tienen que prestar especial
atención a la información que se indica.
No reparar ni lubricar la máquina con órganos
en movimiento o con el motor encendido.
Prohibido fumar, encender cerillas o llamas, de-
jar llamas libres o ocasionar chispas.
No tocar partes recalentadas del motor.
Los gases de escape pueden causar malesta-
res o ser incluso mortales. Si es necesario po-
ner en marcha un en un espacio cerrado, usar
un alargador para el tubo de escape para que,
en este modo, el humo salga fuera. Trabajar en
una zona bien ventilada.
¡Atención! No tocar jamás poleas o correas en
movimiento porque pueden crear graves daños
a la persona. No efectuar el mantenimiento con
el motor en marcha.
1.1
DE
DE
HINWEIS - Bitte schenken Sie dem Hinweis ne-
ben diesem Symbol besondere Achtung.
Bei laufenden Bewegungsmechanismen bzw. lau-
fendem Motor dürfen weder Instandsetzungsnoch
Schmierarbeiten vorgenommen werden.
Feuer, offenes Licht und Rauchen verboten.
Achtung - keine heißen Motorteile berühren!
Auspuffgase können Übelkeit oder Tod verursa-
chen.
Wenn es notwendig ist, einen Motor in einem
geschlossenen Raum laufen zu lassen, benüt-
zen Sie eine Verlängerung, um das Auspuffgas
abzuleiten. Versuchen Sie immer in einem gut
belüfteten Raum zu arbeiten.
Vorsicht! Nie laufende Riemenscheiben oder
Treibriemen anfassen, da es gefährlich ist. Nie
bei laufendem Motor Instandhaltung machen.
10
1. SIMBOLOGIA E AVVERTENZE PER LA SICUREZZA (BR)_P3 10-16 rev. 0
1.1
IT
IT
La separazione fra pneumatico e cerchione,
causata dall’esplosione del pneumatico, può
provocare serie ferite o addirittura la morte.
Per prevenire l’esplosione della batteria, tenete
scintille, fiammiferi accesi e fiamme lontani dal-
la stessa. Il gas della batteria può esplodere.
Maneggiare il carburante con cura, è altamen-
te infiammabile; non fate rifornimento mentre
fumate, o vicino a fiamme o scintille, o quando
il motore è acceso.
L’acido solforico della batteria è velenoso. È in
grado di causare bruciature alla pelle, bucare
vestiti e causare cecità se arriva negli occhi.
Evitate le scivolate. Non guidate dove la mac-
china potrebbe scivolare o inclinarsi. Attenzio-
ne a buche o ad oggetti nascosti.
Prima di usare la macchina è obbligatorio indos-
sare gli appositi dispositivi di sicurezza indivi-
duali: protezione del corpo, guanti di protezione,
calzature di sicurezza, protezioni acustiche.
1.1
EN
EN
A burst which separates the tyre from the rim
parts can cause serious injury or death.
Prevent battery explosions: keep sparks, ligh-
ted matches and open flames away from the
top of the battery. Battery gas can explode.
Handle fuel with care, it is highly flammable: do
not refuel machine while smoking, when ma-
chine is near an open flame or sparks, or when
the engine is running. Stop the engine.
Sulfuric acid in battery electrolyte is poisonous.
It is strong enough to burn skin, eat holes in
clothing and cause blindness if it gets in con-
tact with the eyes.
Avoid tipping. Don’t drive where machine could
slip or tip. Stay alert for holes and other hidden
objects.
Before using the machine, it is mandatory to
put on the appropriate individual safety devices:
body protection, protection gloves, security
shoes, ear protection.
1.1
FR
FR
La séparation entre le pneu et la jante, provo-
quée par l’explosion d’une roue peut causer
des dommages, blessures ou la mort.
Prevenir l’explosion de la batterie: tenir les éti-
celles, les alumettes et le feu loin de la batterie.
Le gaz de la batterie peut exploser.
Manier avec soin le carburant car c’est très in-
flammable. Ne pas remplir le réservoir si vous
êtes en train de fumer ou pendant que la machi-
ne est près du feu ou d’étincelles ou encore
pendant qu’elle travaille. Arrêter le moteur.
L’acide sulfurique de la batterie est toxique. Il
peut causer des brûlures à la peau, endomma-
ger les vêtements et peut aussi causer cécité.
Eviter les pentes. Ne pas conduire la machine
où elle pourrait glisser ou se renverser. Faire at-
tention aux trous ou à tout autre obstacle caché.
Avant d’utiliser la machine, il est obligatoire de
mettre les dispositifs individuels de sécurité ap-
propriés: protection du corps, gants de protec-
tion, chaussures de sécurité, protection de
l’ouïe.
1.1
ES
ES
La separación entre el neumático y la llanta
producida por la explosión del neumático pue-
de provocar graves herida e incluso la muerte.
Para prevenir la explosión de la batería mante-
ner chispas, cerillas encendidas y llamas lejos
de la misma. El gas de la batería puede explo-
tar.
Manejar el combustible con cuidado porque es
sumamente inflamable; no repostar mientras se
fuma o cerca de llamas o chispas, o cuando el
motor está encendido.
El ácido sulfúreo de la batería es venenoso,
puede provocar quemaduras en la piel, agujear
la ropa y provocar ceguez si llega a los ojos.
Evitar patinazos. No conducir donde la máqui-
na pueda patinar o inclinarse. Cuidado con los
baches o con objetos escondidos.
Antes de utilizar la máquina es obligatorio po-
nerse los dispositivos individuales de seguridad
apropiados: protección del cuerpo, guantes de
protección, calzado de seguridad, protección
del oído.
1.1
DE
DE
Die Trennung der Räder von den Felgen durch
Explosion kann schwere Verletzungen oder
den Tod verursachen.
Vorbeugung der Batterie-Explosion. Entfernen
Sie Funken, Zündhölzer und Flammen von der
Batterie. Das Batteriegas kann explodieren.
Treibstoff vorsichtig handhaben, da er sehr ent-
zündbar ist: beim Tanken nicht rauchen. Nicht
tanken, wenn die Maschine in der Nähe von
Flammen oder Funken ist oder wenn der Motor
läuft. Immer den Motor abschalten.
Säure der Batterie ist giftig. Sie kann die Haut
verbrennen, Löcher in die Kleidung machen
und Blindheit verursachen.
Nicht dort fahren, wo die Maschine rutschen
könnte. Vorsicht bei Löchern oder versteckten
Gegenständen.
Vor dem Gebrauch der Maschine ist es vorge-
schrieben, die geeignete persönlichen Schutz-
kleidung anzuziehen: Körperschutz, Schutz-
handschuhe, Sicherheitsschuhe, Gehörschutz.
11
1. SIMBOLOGIA E AVVERTENZE PER LA SICUREZZA (BR)_P4 10-16 rev. 0
1.2
IT
IT
1.2 Avvertenze
Leggere attentamente il manuale d’uso prima di av-
viare il motore. Le seguenti avvertenze sono importanti per
l’incolumità dell’operatore e di eventuali osservatori o ani-
mali domestici.
Prudenza e buon senso sono i fattori principali nella
prevenzione degli infortuni.
Non usare la macchina su pendenze superiori a 13°
(24% di inclinazione).
Attenzione, La macchina va utilizzata solo per lo sco-
po per cui è stata progettata, evitare di trasportare perso-
ne, di modificarla o manometterla, evitare di fare gare di
qualsiasi tipo o di usarla come traino ecc.
Pericolo! Il carburante è altamente infiammabile: non
fare rifornimento con il motore in moto, spegnete il motore,
lasciare raffreddare la marmitta, non fare rifornimento
mentre state fumando o siete vicini a fiamme libere o scin-
tille, maneggiare e conservare il carburante con cura.
Prestare particolare attenzione alle avvertenze e alle
adesive di sicurezza poste sulla macchina.
1.2
EN
EN
1.2 Warnings
Read the user manual carefully before starting up the
engine. The following warnings are important for the safety
of the operator and any onlookers or pets.
Caution and common sense are the main factors in
accident prevention.
Do not use the machine on slopes exceeding 13° (24%
in inclination).
Attention the machine should only be used for the pur-
pose for which it was designed, avoid transporting people,
amend or modify it, avoid doing any kind of racing or to
use it as towing, etc.
Danger! The fuel is highly inflammable. Don’t refuel
when the engine is on. Turn off the engine. Let the muffler
cool down. Don’t refuel while smoking or in the vicinity of
naked flames or sparks. Handle and store the fuel with
care.
Pay particular attention to the warnings and safety
stickers on the machine.
1.2
FR
FR
1.2 Avertissements
Lire avec attention le manuel d’utilisation avant le dé-
marrage du moteur. Les avertissements suivants sont im-
portants pour la sécurité de l’opérateur et de éventuels ob-
servateurs ou animaux domestiques.
Prudence et bon sens sont les facteurs essentiels pour
la prévention des accidents.
Ne pas utiliser la machine sur des pentes supérieures
à 13° (24% d’inclinaison).
Attention la machine doit être utilisée seulement dans
le but pour lequel elle a été conçue, d'éviter le transport de
personnes, modifier-la ou altérer-la, éviter de faire quel que
type de course ou de l'utiliser comme remorquage, etc.
Danger, le carburant est hautement inflammable, ne
remplissez pas le réservoir avec le moteur en marche,
éteignez le moteur, laissez refroidir le tuyau d’échappe-
ment, ne faites pas le plein alors que vous fumez ou que
vous êtes prêt des flammes libres ou étincelles, utiliser et
conserver le carburant avec soin.
Accorder une attention particulière aux avertissements
et aux adhésifs de sécurité placés sur la machine.
1.2
ES
ES
1.2 Advertencias
Leer atentamente el manual antes de poner en mar-
cha el motor. Las siguientes advertencias son importantes
para la integridad física del operador y de las personas
que estuvieran observando o de los animales domésticos.
La prudencia y el sentido común son los factores prin-
cipales en la prevención de accidentes.
No se debe usar la máquina en pendientes superiores
a los 13° (24% de inclinación).
Atención, la máquina sólo debe utilizarse para el fin
para el que fue diseñado, evitar el transporte de personas,
modificar o modificarlo, evitar hacer cualquier tipo de com-
petición o para utilizarlo como el remolque, etc.
Peligro, el combustible es altamente inflamable, no re-
postar con el motor en movimiento, apagar el motor, dejar
que se enfríe la marmita, no repostar mientras se está fu-
mando o se está cerca de llamas libres o chispas, manejar
y conservar con sumo cuidado el combustible.
Prestar especial atención a las advertencias y a los
adhesivos de seguridad situados en la maquinaria.
1.2
DE
DE
1.2 Hinweise
Die Bedienungsanleitung vor Anlassen des Motors
aufmerksam lesen. Nachfolgende Hinweise sind für die Si-
cherheit des Bedienpersonals und möglicher Beobachter
oder Haustiere wichtig.
Vorsicht und gesunder Menschenverstand sind we-
sentliche Hauptaspekte bei der Unfallverhütung.
Das Gerät nicht auf Hängen mit mehr als 13° Gefälle
(24% Neigung) verwenden.
Achtung! Die Maschine darf lediglich zu dem Zweck
verwendet werden, für den sie entwickelt wurde; es dürfen
keine Personen transportiert werden. Die Maschine weder
abändern noch manipulieren und keine Rennen veranstal-
ten bzw. die Maschine nicht als Zugfahrzeug verwenden
usw.
Gefahr: Der Kraftstoff ist hochbrennbar. Bei laufendem
Motor nie Kraftstoff auffüllen. Den Motor ausschalten, den
Auspuff abkühlen lassen; keinen Kraftstoff auffüllen, wenn
Sie rauchen oder sich in unmittelbarer Nähe von freien
Flammen oder Funken befinden; den Kraftstoff stets vor-
sichtig handhaben.
Bitte beachten Sie insbesondere die Hinweise und
Aufkleber am Maschine.
12
1. SIMBOLOGIA E AVVERTENZE PER LA SICUREZZA (BR)_P5 10-16 rev. 0
1.2
IT
IT
Pericolo! Non toccare mai organi in movimento, pos-
sono creare gravi infortuni alle persone.
Pericolo! Non fare manutenzione col motore in moto.
Prima di iniziare il lavoro imparare a spegnere il motore
in modo sicuro e rapido.
Pericolo! Il movimento dei coltelli è molto pericoloso,
non mettere mai mani e / o piedi vicino ad essi.
Prima di far lavorare altre persone con la vostra mac-
china occorre metterle al corrente delle norme di sicurez-
za, far leggere loro il manuale d’uso e insegnare loro come
si usa.
Prima di accendere la macchina verificare che non ci
siano persone intorno; specialmente bambini.
Prima di partire con la macchina in marcia indietro con-
trollare che non ci siano persone od ostacoli.
Per evitare il pericolo di esalazioni velenose, non ado-
perare il motore acceso in locali chiusi.
Pericolo, non portare passeggeri sulla macchina.
1.2
EN
EN
Danger! Never touch moving machine parts. Can cau-
se serious accidents to people.
Danger! Don’t carry out maintenance with the engine on.
Prior to starting work, learn how to turn off the machine
safely and quickly.
Danger! The movement of blades is very dangerous.
Never put your hands and / or feet near them.
Before letting other people use your machine, you must
inform them about the safety standards. Make them
read the user manual and teach them how to use the
machine.
Before turning on the machine, check that there is no-
body in the vicinity, especially children.
Before reversing the machine, check for people or
obstacles.
To avoid the danger of toxic exhausts, do not use the
engine indoors when turned on.
Danger! Do not carry passengers on the machine.
1.2
FR
FR
Danger, ne jamais toucher les components en mouve-
ment, elles peuvent provoquer de graves accidents aux
personnes.
Danger, ne faire aucun entretien avec le moteur allumé.
Avant de commencer le travail, apprendre à éteindre le
moteur de manière sûre et rapide.
Danger, le mouvement des couteaux est très dange-
reux, ne jamais mettre les mains et/ou les pieds près
des couteaux.
Avant de faire travailler d’autres personnes avec votre
machine, il faut les mettre au courant des normes de sécu-
rité, leur faire lire le manuel d’utilisation et leur apprendre
comment l’utiliser.
Avant de mettre en marche la machine, vérifier qu’il n’y
ait personne dans les alentours, spécialement des enfants.
Avant de partir avec la machine en marche arrière,
contrôler derrière qu’il n’y ait personne ou aucun obstacle.
Pour éviter le danger d’inhalations toxiques, ne pas
utiliser le moteur allumé dans des locaux fermés.
Danger, ne porter aucun passager sur la machine.
1.2
ES
ES
Peligro, no tocar nunca organos en movimiento, pue-
den producir graves accidentes en personas.
Peligro, no realizar el mantenimiento con el motor en
movimiento.
Antes de empezar el trabajo aprender a apagar el
motor de forma segura y rápida.
Peligro, el movimiento de las cuchillas es muy peligro-
so, no poner nunca las manos y/o pies pròximo de las
cuchillas.
Antes de que otras personas empiecen a trabajar con la
máquina hay que comunicarles las normas de seguridad,
hacer que lean el manual de uso y enseñarles cómo se
usa.
Antes de encender la máquina, comprobar que no ha-
ya personas alrededor; especialmente que no haya niños.
Antes de arrancar la máquina en marcha atrás, con-
trolar que no haya personas u obstáculos.
Para evitar el peligro de exhalaciones venenosas, no
se debe tener el motor encendido en locales cerrados.
Peligro, no llevar pasajeros en la máquina.
1.2
DE
DE
Gefahr: Laufende Antriebselement nicht anfassen, dies
könnte schwere Verletzungen verursachen.
Gefahr: Keine Wartungsarbeiten bei laufendem Motor
durchführen.
Lernen Sie vor Arbeitsbeginn, wie der Motor sicher und
schnell abgestellt wird.
Gefahr: Die Messerbewegung ist sehr gefährlich, Hän-
de und/oder Füße nie unter das Messer legen.
Bevor andere Personen mit Ihrem Maschine arbeiten,
sind diese über sämtliche Sicherheitsnormen zu informie-
ren; jeder, der am Gerät arbeitet, muss die Bedienungs-
anleitung gelesen haben. Personen in den Gebrauch ein-
weisen.
Vor Geräteeinschaltung ist sicherzustellen, dass sich
keine Personen, vor allem keine Kinder, in Gerätenähe
aufhalten.
Bevor rückwärts gefahren wird, ist sicherzustellen,
dass weder Personen noch Hindernisse im Weg stehen.
Damit eine Einatmung von Giftgasen vermieden wird,
darf der Motor nicht in geschlossenen Räumen betrieben
werden.
Gefahr: Keine Personen mitfahren lassen.
13
1. SIMBOLOGIA E AVVERTENZE PER LA SICUREZZA (BR)_P6 10-16 rev. 0
1.2
IT
IT
Pericolo, non usare la macchina quando si è affaticati,
non bere alcolici.
Controllare il terreno prima di procedere alla lavorazio-
ne, che non vi siano sassi, bastoni o corpi estranei, che
potrebbero diventare molto pericolosi.
Pericolo, non lavorare su pendenze eccessive dove la
macchina potrebbe scivolare o ribaltarsi.
Prima di iniziare il lavoro, indossare indumenti appro-
priati, guanti, scarpe, occhiali, cuffie ecc.
Sulle pendenze, in discesa moderare la velocità.
Pericolo, non far lavorare persone troppo giovani; vie-
tato l'uso ai minori di 18 anni e ai non esperti.
Pericolo, non fare retromarcia col motore accelerato.
Pericolo, non operare con la macchina vicino a fossati
o banchine che possano cedere sotto il peso della mac-
china, specialmente quando la superficie è friabile o ba-
gnata.
In discesa curvare sempre lentamente.
1.2
EN
EN
Danger! Do not use the machine when tired. Do not
drink alcohol.
Check the ground before working. Check for stones,
sticks or foreign bodies, which could be very dangerous.
Danger! Do not work on overly sloping ground where
the machine could slide or tip over.
Before commencing work, wear appropriate work clo-
thing, gloves, protective footwear and glasses.
Slow down on downhill slopes.
Danger! Must not be used by people who are too
young. Must not be used by minors under the age of 18
years and by non-experts.
Danger! Do not reverse with accelerated engine.
Danger! Do not use the machine near ditches or piers
that may give way under the weight of the machine, espe-
cially when the surface is friable or wet.
Always take downhill bends slowly.
1.2
FR
FR
Danger, ne pas utiliser la machine lorsqu’on est
fatigué, ne pas boire de boissons alcoolisées.
Vérifier le terrain avant de commencer le travail, qu’il
n’y ait aucun caillou, bâton ou corps étranger qui pourra-
ient devenir très dangereux.
Danger, ne pas travailler sur des pentes trop raides où
la machine pourrait glisser ou se renverser.
Avant de commencer le travail, porter des vêtements
de travail appropriés, des gants, des grosses chaussures,
des lunettes.
Sur les pentes, modérer la vitesse en descente.
Danger ne pas faire travailler des personnes trop jeunes;
interdire l’utilisation aux mineurs de 18 ans et aux personnes
sans expérience.
Danger, ne pas faire marche arrière avec le moteur en
accélération.
Danger, ne pas utiliser la machine près de fossés ou
d’accotements qui puissent céder sous le poids de la ma-
chine spécialement quand la surface est friable ou mouil-
lée.
En descente braquer toujours lentement.
1.2
ES
ES
Peligro, no usar la máquina cuando se está cansado,
no tomar bebidas alcohólicas.
Controlar el terreno antes de realizar el trabajo, que no
haya piedras, palos o cuerpos extraños ya que podrían re-
sultar peligrosos.
Peligro, no trabajar en pendientes excesivas donde la
máquina podría deslizar o volcar.
Antes de empezar a trabajar, llevar puestas prendas
apropiadas para el trabajo, guantes, botas, gafas.
En las pendientes, en bajada, moderar la velocidad.
Peligro, no dejar que trabajen personas demasiado jó-
venes; prohibir el uso a menores de 18 años y a los que
no son expertos.
Peligro, no dar marcha atrás con el motor acelerado.
Peligro, no trabajar con la maquinaria cerca de fosos o
arcenes que puedan ceder con el peso de la máquina,
especialmente si la superficie es friable o está mojada.
Cuando se circule cuesta abajo, tomar siempre las
curvas lentamente.
1.2
DE
DE
Gefahr: Das Gerät bei Ermüdung und nach Alkohol-
konsum nicht benutzen.
Vor Arbeitsbeginn die Bodenbeschaffenheit prüfen; si-
cherstellen, dass keine Steine, Stöcke oder Fremdkörper
vorhanden sind, und damit gefährlich werden könnten.
Gefahr: Keine Böden mit starkem Gefälle, wo das Gerät
wegrutschen oder sich überschlagen könnte, bearbeiten.
Vor Arbeitsbeginn hat der Fahrer geeignete Arbeits-
kleidung und Arbeitsschuhe zu tragen, sowie Schutzhand-
schuhe und Augenschutz zu benutzen.
Auf Hängen bei Abwärtsfahrt die Geschwindigkeit re-
duzieren.
Gefahr: Nicht mit zu jungen Personen arbeiten; das
Gerät darf weder von Jugendlichen unter 18 Jahren noch
von unerfahrenen Personen gefahren werden.
Gefahr: Bei beschleunigtem Motor nicht rückwärtsfah-
ren.
Gefahr: Den Pflegetraktor nicht in unmittelbarer Nähe
von Gräben oder Erdwällen betreiben, da diese unter dem
Gewicht des Gerätes nachgeben könnten, und zwar vor al-
lem dann, wenn das Erdreich bröckelig oder nass ist.
Bitte fahren Sie bei Gefälle Kurven nur sehr lan
g
sam.
14
1. SIMBOLOGIA E AVVERTENZE PER LA SICUREZZA (BR)_P7 10-16 rev. 0
1.2
IT
IT
Prima di avviare il motore, riempire il serbatoio di car-
burante. Fare rifornimento di combustibile solo all’aperto,
spegnere sempre il motore, stare lontano da scintille o
fiamme, non fumare! Non rimuovere il tappo serbatoio car-
burante quando il motore è caldo. Richiudere in modo si-
curo il tappo del serbatoio e dei contenitori di carburante.
Evitare fuoriuscite di combustibile; dopo aver riempito il
serbatoio, asciugare ogni residuo di carburante sulla mac-
china prima di avviare il motore.
Pericolo, non manomettere o disattivare i dispositivi di
sicurezza.
Pericolo, non lavorare con persone vicine alla mac-
china: corpi estranei possono essere lanciati risultando
molto pericolosi.
Ogni utilizzo improprio comporta il decadimento della
garanzia ed il declino di ogni responsabilità del costruttore.
I coltelli deformati o danneggiati devono essere sem-
pre sostituiti, mai riparati.
Usare sempre ricambi ed accessori originali.
1.2
EN
EN
Fill the fuel tank before starting up the engine. Only
refuel outdoors. Always turn off the engine. Stay away from
sparks or flames. Do not smoke. Do not remove the fuel
tank cap when the engine is hot. Safely close the tank cap
and the fuel containers.
Avoid fuel leaks. After having filled the tank dry all fuel
residues on the machine before starting the engine.
Danger! Do not tamper with or disable the safety devi-
ces.
Danger! Do not work with persons near the machine:
foreign objects may be launched becoming very dange-
rous.
All improper use will cause the warranty to expire and
the manufacturer shall not be held liable.
Misshapen or damaged blades must always be repla-
ced and never repaired.
Always use original spare parts and accessories.
1.2
FR
FR
Avant de mettre en marche le moteur, remplir le réser-
voir de carburant. Faire le plein de combustible seulement
à l’extérieur, éteindre toujours le moteur, se tenir loin des
étincelles ou des flammes, ne pas fumer! Ne pas enlever
le bouchon du réservoir carburant lorsque le moteur est
encore chaud. Refermer de façon sûre le bouchon du ré-
servoir et des récipients de carburant.
Eviter que le combustible déborde, après avoir rempli
le réservoir essuyer tout résidu de carburant sur la machi-
ne avant de démarrer.
Danger, ne pas endommager ou désactiver les dispo-
sitifs de sécurité.
Danger, Ne travaille pas avec des personnes proches
de la machine: des corps étrangers peuvent être projetés
et devenir très dangereux.
Toute utilisation inappropriée comporte l’annulation de
la garantie et le déclin de toute responsabilité de la part du
constructeur.
Les couteaux déformés ou endommagés doivent tou-
jours être remplacés, jamais réparés.
Utiliser toujours des pièces de rechange et accessoi-
res originaux.
1.2
ES
ES
Antes de poner el motor en marcha, llenar el depósito
de combustible. Repostar combustible solo al aire libre,
apagar siempre el motor, permanecer lejos de chispas o
llamas, ¡no fumar! No se puede quitar el tapón del depó-
sito de combustible cuando el motor está caliente. Cerrar
de forma segura el tapón del depósito y de los recipientes
del combustible.
Evitar fugas de combustible una vez que se haya llena-
do el depósito hay que secar todos los residuos de com-
bustible que haya en la máquina antes de poner en mar-
cha el motor.
Peligro, no manipular o desactivar los dispositivos de
seguridad.
Peligro, no trabajar con gente cercana la máquina: los
cuerpos extraños pueden ser arrojados y diventar muy pe-
ligroso.
Cada uso indebido conlleva la anulación de la garantía
y el declive de toda la responsabilidad del fabricante.
Las cuchillas deformadas o dañadas deben sustituirse
siempre, nunca deben repararse.
Usar siempre recambios y accesorios originales.
1.2
DE
DE
Vor Inbetriebnahme des Motors ist der Kraftstofftank zu
befüllen. Der Kraftstoff darf nur im Freien aufgefüllt wer-
den; dazu stets den Motor abstellen und sich fern von Fun-
ken oder Flammen halten; nicht rauchen! Bei warmem Mo-
tor den Dankdeckel nicht entfernen. Tankdeckel und Kraft-
stoffkanister nach dem Befüllen wieder fest verschließen.
Vermeiden Sie jeglichen zusätzlichen Kraftstoffaustritt.
Trocknen Sie Kraftstoffreste am Gerät ab, nachdem sie
den Tank befüllt haben und bevor Sie den Motor anlassen.
Gefahr: Sicherheitseinrichtungen weder manipulieren
noch deaktivieren.
Gefahr: Den Personen nicht nähe auf Maschine ver-
wenden: da weggeschleudert Fremdkörper sehr gefährlich
werden könnte.
Jeder unsachgemäße Gebrauch führt zur sofortigen
Ungültigkeit der Garantie und enthebt den Hersteller von
jeder Haftung.
Verformte oder beschädigte Messer müssen stets
ausgewechselt und dürfen nicht repariert werden.
Es müssen ausschließlich Originalersatzteile und Origi-
nalzubehöre verwendet werden.
15
1. SIMBOLOGIA E AVVERTENZE PER LA SICUREZZA (BR)_P8 10-16 rev. 0
1.2
IT
IT
Pericolo, non fare nessun tipo di regolazione o pulizia
con il motore in moto.
L’utilizzatore è sempre responsabile dei danni arrecati
a terzi.
Lavorare solo con la luce del sole o con buona luce ar-
tificiale.
Pericolo, non fermarsi su pendenze o quando si lavora
in salita o in discesa.
Se dovete svuotare il serbatoio carburante, eseguite
questa operazione all’aperto.
ATTENZIONE: per ridurre il pericolo di incendio man-
tenere il vano motore, la marmitta, i collettori di scarico, la
batteria, la zona serbatoio e conduttura carburante liberi
da erba, foglie, polvere, ecc..
Pericolo, non depositare la macchina dentro edifici do-
ve i vapori del carburante possono raggiungere fiamme,
scintille o fili elettrici scoperti.
Staccare l’attrezzo dal gruppo motore per qualsiasi
operazione di manutenzione.
Sostituire sempre le marmitte usurate o danneggiate.
1.2
EN
EN
Danger! Do not carry out any type of adjustments or
cleaning when the engine is in operation.
The user is always responsible for damage caused to
third parties.
Only work in daylight or in good artificial light.
Danger! Do not stop on slopes or when working uphill
or downhill.
If you have to empty the fuel tank, do this operation
out-doors.
CAUTION! To lower the risk of fire, keep the engine
compartment, muffler, exhaust manifolds, battery, tank
area and fuel pipes free from grass, leaves, dust, etc..
Danger! Do not store the machine in buildings where
fuel fumes could come into contact with flames, sparks
and unsheathed electrical wires.
Detach the implement from the engine group before
any maintenance operations.
Always replace the worn or damaged mufflers.
1.2
FR
FR
Danger, ne faire aucun genre de réglage ou nettoyage
avec le moteur en marche.
L’utilisateur est toujours responsable des dégâts provo-
qués à des tiers.
Travailler seulement avec la lumière du soleil ou une
bonne lumière artificielle.
Danger, ne pas s’arrêter sur des pentes ou lorsque l’on
travaille en montée ou en descente.
Si vous devez vider le réservoir carburant, exécuter la
opération à l’extérieur.
ATTENTION: pour diminuer le risque d’incendie, le
compartiment moteur, le tuyau d’échappement, les collec-
teurs de décharge, la batterie, la zone réservoir et con-
duite carburant doivent être exemptes d’herbe, feuilles,
poussière, etc.
Danger, ne pas laisser la machine dans des locaux
les vapeurs du carburant peuvent atteindre des flammes,
des étincelles ou des fils électriques découverts.
Débrancher l’outil du groupe moteur pour toute opé-
ration d’entretien.
Remplacer toujours le tuyau d’échappement usé ou
endommagé.
1.2
ES
ES
Peligro, no se puede realizar ningún tipo de regulación
o limpieza con el motor en movimiento.
El usuario siempre es el responsable de los daños que
se ocasionen a terceros.
Trabajar solo con luz natural o una buena luz artificial.
Peligro, no se puede detener el vehículo en terrenos
en pendiente o cuando se está trabajando cuesta arriba o
cuesta abajo.
Si hay que vaciar el depósito del combustible, las ope-
raciones deben realizarse al aire libre.
ATENCIÓN: para reducir el peligro de incendio mante-
ner el hueco motor, la marmita, los colectores de escape,
la batería, la zona del depósito y los conductos del combu-
stible libres de hierba, hojas, polvo, etc.
Peligro, no colocar la máquina dentro de edificios don-
de los vapores del combustible puedan llegar a llamas,
chispas o con cables eléctricos descubiertos.
Para cualquier intervención de mantenimiento, desco-
nectar la hierramienta del grupo del motor.
Sustituir siempre las marmitas desgastadas o dañadas.
1.2
DE
DE
Gefahr: Bei laufendem Motor keine Einstellung oder
Reinigung vornehmen.
Der Betreiber ist stets für Schäden, die er Drittperso-
nen zufügt, verantwortlich.
Ausschließlich bei Sonnenlicht oder guter künstlicher
Beleuchtung arbeiten.
Gefahr: Es darf nicht auf Hängen oder dann gehalten
werden, wenn man bergauf oder bergab arbeitet.
Falls der Kraftstofftank geleert werden muss, ist dies
im Freien durchzuführen.
ACHTUNG: Zur Reduzierung von Brandgefahr sind
der Motorraum, der Auspuff, die Abgaskollektoren, die Bat-
terie, der Tankbereich und die Kraftstoffleitungen frei von
Gras, Blättern, Staub usw. zu halten.
Gefahr: Das Gerät nicht in Gebäuden abstellen, wo die
Kraftstoffdämpfe Flammen, Funken oder freie Stromdrähte
erreichen könnten.
Die Werkzeug vor jeder Wartungsarbeit vom Motorag-
gregat abklemmen.
Verschlissene oder beschädigte Auspuffe müssen
stets ersetzt werden.
16
1. SIMBOLOGIA E AVVERTENZE PER LA SICUREZZA (BR)_P9 10-16 rev. 0
1.2
IT
IT
Conservare il carburante in contenitori appositi, mai
conservarlo in contenitori per alimenti.
Fare molta attenzione alle persone ed ai passanti oc-
casionali quando si lavora vicino ad una strada.
Pericolo, non lavorare mai con persone intorno alla
macchina, tenere sempre a distanza di sicurezza.
Pericolo, non manomettere le regolazioni del motore,
in modo particolare il numero massimo di giri.
Se si urta un corpo estraneo disinnestare la PTO, fer-
mare il motore, togliere la chiave di avviamento e ispezio-
nare la macchina, se la macchina vibra portarla al Centro
Assistenza per farla controllare.
Far raffreddare il motore e la marmitta prima di rico-
verare la macchina in locali chiusi.
Per qualsiasi spostamento che non sia di lavorazione,
disinnestare la PTO del gruppo motore.
1.2
EN
EN
Keep the fuel in designated containers. Never keep the
fuel in food-grade containers.
Pay particular attention to persons and occasional
passers-by when working near roads.
Danger! Never work with persons around the machine.
Always maintain a safety distance.
Danger! Do not tamper with the engine settings, espe-
cially the maximum number of revolutions.
If you hit a foreign body, disengage the PTO, stop the
engine, remove the ignition key and inspect the machine. If
the machine vibrates, take it to the Service Centre to have
it checked.
Let the engine and muffler cool down before moving
the machine indoors.
Before any movement other than tilling, disengage the
PTO of the engine.
1.2
FR
FR
Conserver le carburant dans des récipients appropriés,
ne jamais le conserver dans des récipients pour aliments.
Faire très attention aux personnes et aux passants oc-
casionnels lorsque l’on travaille près d’une route.
Danger, ne jamais travailler avec des personnes au-
tour de la machine, les tenir toujours à une distance de sé-
curité.
Danger, ne pas altérer les réglages du moteur, en par-
ticulier le nombre maximum de tours.
Si on heurte contre un corps étranger, déconnecter la
PDF, arrêter le moteur, enlever la clef de démarrage et in-
specter la machine, si la machine vibre, la porter au
Centre d’Assistance afin de la faire contrôler.
Laisser refroidir le moteur et le tuyau d’échappement
avant de ranger la machine dans des locaux fermés.
Pour tout déplacement qui n’est pas de travail, désac-
coupler la PTO du moteur.
1.2
ES
ES
Conservar el combustible en recipientes adecuados,
no conservarlo nunca en recipientes para alimentos.
Tener mucho cuidado con la gente y los que pasen
ocasionalmente por el lugar cuando se trabaja cerca de
una carretera.
Peligro, no trabajar nunca con personas alrededor de
la máquina, mantener siempre la distancia de seguridad.
Peligro, no manipular las regulaciones del motor espe-
cialmente el número máximo de revoluciones.
Si se golpea un cuerpo extraño, desacoplar las TDF,
detener el motor, quitar la llave de arranque e inspeccio-
nar la maquinqria; si la máquina vibra llevarla al Centro de
Asistencia para controlarla.
Dejar enfriar el motor y la marmita antes de depositar
la máquina en locales cerrados.
Para cualquier desplazamiento que no sea de trabajo,
desacoplar la toma de fuerza PTO del motor.
1.2
DE
DE
Den Kraftstoff in geeigneten Kanistern aufbewahren;
auf keinen Fall dürfen hierzu Lebensmittelbehälter verwen-
det werden.
Besonders auf Personen und gelegentliche Passanten
achten, wenn in Straßennähe gearbeitet wird.
Gefahr: Es darf nie mit dem Gerät gearbeitet werden,
wenn sich Personen im Geräteumfeld befinden; stets einen
Sicherheitsabstand einhalten.
Gefahr: Die Motoreinstellungen dürfen nicht abgeän-
dert werden; dies gilt insbesondere für die Höchstdrehzahl.
Schlägt das Gerät gegen einen Fremdkörper, sind die
Messer auszustecken; den Motor abstellen, die Zündker-
zen ausstecken, den Zündschlüssel ziehen und den Schle-
gelmäher überprüfen; vibriert das Gerät, ist es zur Prüfung
zum Kundendienst zu bringen.
Den Motor und den Auspuff abkühlen lassen, bevor
das Gerät in einen geschlossenen Raum gefahren wird.
Wird das Gerät nicht zur Bodenbearbeitung verwendet,
ist vor jeder Verlagerung des Gerätes die Zapfwelle des
Motors ausstecken.
17
2. IDENTIFICAZIONE E ADESIVI (BR)_P1 10-16 rev. 0
2. IDENTIFICAZIONE E ADESIVI
2.1
IT
IT
Su ogni macchina viene applicata una targhetta adesiva di
identificazione e certificazione del prodotto (fig.2/1).
NOTA: il valore del peso indicato sulla targhetta di identifi-
cazione è riferito al solo attrezzo senza gruppo motore.
2. IDENTIFICATION AND STICKERS
EN
EN
An ID sticker is applied to every machine as well as pro-
duct certification (fig.2/1).
N.B. the weight indicated on the identification plate refers
to the weight of the implement only, without unit transmis-
sion.
2.1 Targhetta d'identificazione - Identification plate
Plaque d'idéntification - Placa de identificación
Typenschild
1 3 2
fig. 2/1
4 6 7 5
Legenda - Key - Légende - Leyenda - Zeichenerklärung
2. IDENTIFICATION ET ADHESIFS
1. Marchio 2. Costruttore 3. Modello
Brand Manufacturer Model
Marque Constructeur Modèle
Marca Constructor Modelo
Brandmal Hersteller Modell
FR
4. Potenza teorica richiesta 5. Massa
FR
Required nominal power Mass
Puissance théorique demandée Poids
Sur chaque machine est appliquée une plaque adhésive
de identification et certification du produit (fig.2/1).
NOTE: la valeur du poids indiqué sur la plaquette d’identifi-
cation se réfère uniquement à l’outil sans le groupe mo-
teur.
Potencia teórica pedida Peso
Theoretisch nötige Leistung Gewicht
2. IDENTIFICACIÓN Y ADHESIVOS
6. Numero di identificazione dell'anno di produzione
Identification number of production year
Numéro d’idéntification de l'année de mise en circulation
Numero de identificación de l'año de producción
Identifizierungsnummer der Produktionsjahr
ES
ES
7. n. di serie
serial n.
Todas las máquinas llevan una placa adhesiva de identifi-
cación y certificación del producto (fig.2/1).
NOTA: el valor del peso indicado en la placa de identifica-
ción se refiere únicamente a la hierramienta, sin el grupo
motor.
n. de série
n. de matricúla
2. IDENTIFIZIERUNG UND AUFKLEBER
Serienzahl
DE
DE
An jedem Gerät ist ein Aufkleber angebracht, der das Pro-
dukt identifiziert (Bild 2/1).
NOTE: Der auf dem Typenschild angegebene Gewichts-
wert bezieht sich lediglich auf die Werkzeug ohne Motor-
aggregat.
Year Id. SN
Des. Type
BCS S.p.A. Viale Mazzini 161
20081 Abbiategrasso (MI)
ITALIA
Power kW Mass kg
18
2. IDENTIFICAZIONE E ADESIVI (BR)_P2 10-16 rev. 0
2.2
2.2 Adesivi macchina - Labels of the machine - Adhésifs de la machine - Adhesivos máquina - Aufkleber
fig.2/2
IT
EN
FR
ES
DE
2.2.1 Legenda degli
adesivi
2.2.1 Labels key
2.2.1 Légende des
adhésifs
2.2.1 Leyenda de
adhesivos
2.2.1 Zeichenerklärung
der Aufkleber
1. Adesivo prodotto
1. Product label 1. Adhésif article 1. Adhesivo producto 1. Artikel Aufkleber
2. Leggere manuale
2. Read manual 2. Lire le manuel 2. Leer el manual 2. Anleitung lesen
3. Distanza di sicurezza
3. Safety distance 3. Distance de sécuri 3. Distancia de seguridad 3. Sicherheitsabstand
4. Made in Italy
4. Made in Italy 4. Made in Italy 4. Made in Italy 4. Made in Italy
5. Lame taglienti
5. Cutting blades 5. Lames tranchantes 5. Las cuchillas afiladas 5. scharfen Klingen
6. Adesivo pericolo
6. Danger label 6. Étiquette de danger 6. Etiqueta de peligro 6. Gefahrzettel
7. Superficie calda 7.
Hot surface 7.
Surface chaude 7.
Superficie caliente 7.
Heiße Oberfläche
8. Regolazione altezza 8. Height adjustment 8. réglage de la hauteur 8. ajuste de altura 8. Höhenverstellung
2
Year Id. SN
Des. Type
BCS S.p.A. Viale Mazzini 161
20081 Abbiategrasso (MI)
ITALIA
Power kW Mass kg
1
5
6
7
4
3
8
19
2. IDENTIFICAZIONE E ADESIVI (BR)_P3 10-16 rev. 0
2.3
IT
IT
2.3 Mantenimento degli adesivi
IMPORTANTE! Gli adesivi vanno mantenuti puliti da pol-
vere e fango, devono essere sempre ben visibili e leggibili,
occorre sostituirli se mancanti o illeggibili.
Nel caso vengano sostituiti componenti della macchina che
in origine erano dotati di adesivi riguardanti la sicurezza
occorre assolutamente riportare il componente nelle sue
condizioni originali completo di nuovi adesivi.
Gli adesivi sono disponibili sugli esplosi ricambi specifici di
ogni modello di macchina.
Nuovi adesivi possono essere richiesti al Costruttore tra-
mite il vostro rivenditore; in questo caso è necessario il co-
dice parte che, di norma, è presente anche sull’adesivo.
2.3
EN
EN
2.3 Preservation of the labels
IMPORTANT! The labels must be kept clean from dust
and mud, must always be clearly visible and legible, must
be replaced if missing or illegible.
In the case be replaced a machine components that were
originally equipped with label on safety, need absolutely to
return the component to its original condition complete with
new labels.
The labels are available on the exploded parts specific to
each machine model.
New labels may be obtained from the Manufacturer
through your dealer; in this case you need the code part,
which is normally also printed on the label.
2.3
FR
FR
2.3 Maintenance des adhésifs
IMPORTANT! Les adhésifs doivent rester propres sans
poussière et sans boue, ils doivent toujours être bien visi-
bles et lisibles, il faut les remplacer s’ils manquent ou s’ils
sont illisibles.
Si des composants de la machine devaient être remplacés,
qui à l’origine sont munis d’adhésifs concernant la sécurité,
il faut absolument remettre le composant dans ses condi-
tions initiales, y compris les nouveaux adhésifs.
Les adhésifs sont disponibles sur les pièces de rechange
détaillées spécifiques de chaque modèle de machine.
De nouveaux adhésifs peuvent être demandés au Con-
structeur par l’intermédiaire de votre revendeur; dans ce
cas, il est nécessaire de fournir la partie du code qui se
trouve normalement sur l’adhésif également.
2.3
ES
ES
2.3 Mantenimiento de los adhesivos
¡IMPORTANTE! Los adhesivos deben mantenerse sin pol-
vo ni lodo, tienen que verse y leerse fácilmente y, cuando
se caigan o se lean mal, tienen que sustituirse.
En caso de que se sustituyan componentes de la máquina
que originalmente estaban dotados de adhesivos relacio-
nados con la seguridad, hay que volver a colocar obligato-
riamente el componente tal como era originalmente, con
sus adhesivos nuevos.
Los adhesivos pueden verse en los diseños detallados de
los recambios específicos de cada modelo de máquina.
Se pueden pedir nuevos diseños al fabricante a través del
vendedor autorizado y en este caso será necesario dar el
código de la pieza que normalmente existe también en el
adhesivo.
2.3
DE
DE
2.3 Erhaltung der Aufkleber
WICHTIG! Die Aufkleber müssen sauber und staub- sowie
schmutzfrei gehalten werden, müssen stets gut sichtbar
und gut leserlich sein und sind bei Abnutzung oder Fehlen
zu ersetzen.
Falls Bauteile des Gerätes ersetzt werden, auf denen sich
ursprünglich Aufkleber befanden, sind am ersetzten Bauteil
unbedingt alle betreffenden Aufkleber neu anzubringen.
Die Aufkleber sind in den Explosionszeichnungen des Er-
satzteilkatalogs spezifisch für jedes Gerätemodell abgebil-
det.
Neue Aufkleber können über den Händler beim Hersteller
bezogen werden. In diesem Fall muss die Teilnummer an-
gegeben werden, die normalerweise auch auf dem Auf-
kleber steht.
22
4. MESSA IN FUNZIONE DELLA MACCHINA (BR)_P1 10-16 rev. 0
4. MESSA IN FUNZIONE DELLA MACCHINA
4.3
IT
IT
4.1 Apertura della scatola
La macchina è consegnata in una scatola di cartone spo-
stabile tramite muletto. Aprire la scatola, togliere gli
accessori.
Tagliare la scatola nei 4 bordi se non si dispone di un
paranco di sollevamento.
4.2 Verifiche preliminari
Occorre controllare l'integrità della macchina e accertare
che non abbia subito danni durante il trasporto. Quindi pro-
cedere al montaggio come da punto 4.3.
4.3 Assemblaggio
Attenzione: per tutte le operazioni di montaggio,
riparazione ed uso servirsi di guanti da lavoro (fig.4/1).
Le macchine sono fornite completamente montate in im-
ballo. Per la versione BladeRunner occorre montare le
ruotine e portarle in posizione di lavoro, per questo, pro-
cedere come da fig.4/2, 1) calzare le ruotine; 2) posi-
zionare le rondelle; 3) inserire le copiglie e girarne le estre-
mità per evitare che si perdano; 4) lubrificare le bussole
con grasso Grease 30.
4. SETTING UP OF THE MACHINE
4.3
EN
EN
4.1 Opening the crate
The machine is delivered in a carton box (fig.4/1) movable
by a forklift. Open the box, remove the accessories.
Cut the box at the 4 edges if no lifting hoist is available.
4.2 Preliminary checks
You need to check the integrity of the machine and make
sure that no damage has occurred during transport. Then,
reassemble as the paragraph 4.3.
4.3 Assembly
Attention: for all assembly and repair operations,
always wear heavy work gloves (fig.4/1).
The machines are supplied completely assembled in
their packaging. For the BladeRunner version, assemble
the small wheels and set them in their operating position,
proceeding as shown in fig.4/2, 1) fit on the wheels; 2) po-
sition the washers; 3) insert the split pins and turn the ends
to prevent them from falling off; 4) lubricate the bushings
with Grease 30 lubricant.
4. MISE EN FONCTION DE LA MACHINE
4.3
FR
FR
4.1 Ouverture de la casse
La machine est livrée dans une caisse (fig.4/1) qui peur
être déplacée au moyen d'un chariot élévateur. Ouvrir la
caisse en commençant par le couvercle, enlever les acces-
soires.
Couper la boîte sur les 4 bords si on ne dispose pas d’un
palan de soulèvement.
4.2 Contrôles préliminaires
Il faut contrôler l'intégrité de la machine et s'assurer qu'elle
n'ait subi aucun dommage durant le transport. Puis procé-
der au montage selon le point 4.3.
4.3 Montage
Attention: pour les opérations de montage, de ré-
paration et d'utilisation, utiliser gants de travail (fig.
4/1).
Les machines sont fournies entièrement montées et
emballées. Pour la version BladeRunner, il faut placer les
petites roues et les porter sur la position de travail, pour
cela, il faut procéder selon la fig.4/2, 1) caler les petites
roues; 2) placer les rondelles; 3) insérer les goupilles et
tourner les extrémités pour éviter de les perdre; 4) lubrifier
les douilles avec l’huile Grease 30.
4. PUESTA EN FUNCIONAMIENTO MÁQUINA
4.3
ES
ES
4.1 Apertura de la caja
La máquina se entrega en una caja (fig.4/1) que puede de-
splazarse mediante carretilla elevadora. Abrir la caja em-
pezando por la tapa, quitar los accessorios.
Cortar la caja por los 4 bordes si no se tiene un aparejo de
elevación.
4.2 Controles previo
Hay que controlar el estado de la máquina y comprobar
que no haya sufrido daños durante el transporte. A conti-
nuación realizar el monatje come se indica en el punto 4.3.
4.3 Montaje
Atención: para todas las operaciones de montaje,
reparación y uso, usar guantos de trabajo (fig.4/1).
Las máquinas se entregan completamente embaladas.
Para la versión BladeRunner hay que montar las ruedas y
ponerlas en posición trabajo. Para ello, hay que hacer lo
ilustrado en la fig.4/2: 1) montar las ruedas; 2) colocar las
arandelas; 3) introducir los pasadores y girar sus extremos
para evitar que se pierdan; 4) lubricar los bujes con grasa
Grease 30.
4. INBETRIEBNAHME DES GERÄTS
4.3
DE
DE
4.1 Verschlag öffnen
Das Gerät wird in einem Verschlag transportiert und mit
einem Stapler verfahren. Den Verschlagdeckel zuerst öff-
nen und die Zubehörteile entfernen.
Die Verpackung an den 4 Kanten aufschneiden, wenn kein
Hubkran vorhanden ist.
4.2 Kontrollen im Vorfeld
Das Gerät auf Unversehrtheit und mögliche Transport-
schäden überprüfen. Daraufhin wie unter Punkt 4.3 be-
schrieben, mit der Montage beginnen.
4.3 Montage
Achtung: für alle Montage-Reparatur- und Gebrauch-
sarbeiten Handschuhe immer anziehen (Bild 4/1).
Die Geräte werden vollständig montiert verpackt und
angeliefert. Bei der BladeRunner Ausführung sind die Rä-
der anzubringen und in Arbeitsstellung zu bringen: Hierzu
ist entsprechend Abb.4/2 vorzugehen: 1) die Räder an-
bringen; 2) die Unterlegscheiben aufstecken; 3) die Splinte
einsetzen und die Enden drehen, damit vermieden wird,
dass sie verloren gehen; 4) die Buchsen mit Fett der Sorte
Grease 30 schmieren.
24
5. IDENTIFICAZIONE COMANDI E DISPOSITIVI (BR)_P1 10-16 rev. 0
5. IDENTIFICAZIONE COMANDI E DISPOSITIVI
IT
IT
fig. 5/1 - 5/2 - 5/3 - 5/4 - 5/5
1. Leva regolazione altezza di lavoro
2. Perno di fermo ruotine in posizione di lavoro
3. Perno di fermo ruotine in posizione di esclusione
4. Regolazione ruotine in funzione degli pneumatici
5. Carter trasmissione finale a cinghie
6. Perno bloccaggio ruotine (BladeRunner 90 e 110 cm)
7. Ingrassatori per fuselli ruotine
8. Coltelli
9. Rullo posteriore BladeRunner (accessorio)
10. Pattino BladeRunner (accessorio)
11. Rullo posteriore RollerBlade
12. Paratie di protezione
13. Riparo carter trasmissione
14. Flangiatura PTO macchina
5. IDENTIFYING CONTROLS AND DEVICES
EN
EN
fig. 5/1 - 5/2 - 5/3 - 5/4 - 5/5
1. Working height setting lever
2. Stop pin for wheels in working position
3. Stop pin for wheels in idle position
4. Wheel setting in relation to the tires
5. Drive belt gear end casing
6. Wheel locking pin (BladeRunner 90 and 110 cm)
7. Spindle wheel greasers
8. Cutting blades
9. BladeRunner rear roller (accessory)
10 BladeRunner runner (accessory)
11. RollerBlade rear roller
12. Protective divider casing
13. Drive gear safety casing
14. PTO machine flange
5. IDENTIFICATIONS COMMANDES ET DISPOSITIFS
FR
FR
fig. 5/1 - 5/2 - 5/3 - 5/4 - 5/5
1. Levier de réglage de hauteur de travail
2. Pivot d’arrêt des petites roues sur position de travail
3. Pivot d’arrêt des petites roues sur position d’exclusion
4. Réglage des petites roues en fonction des pneumatiques
5. Carter de transmission finale à courroies
6. Pivot de blocage des petites roues (BladeRunner 90 et
110 cm)
7. Graisseurs pour fuseaux des petites roues
8. Couteaux
9. Rouleau postérieur BladeRunner (accessoire)
10 Frotteur BladeRunner (accessoire)
11. Rouleau postérieur RollerBlade
12. Parois de protection
13. Protection du carter de transmission
14. Bridage PTO machine
5. IDENTIFICACIÓN MANDOS Y DISPOSITIVOS
ES
ES
fig. 5/1 - 5/2 - 5/3 - 5/4 - 5/5
1. Palanca regulación altura de trabajo
2. Perno de bloqueo ruedas en posición de trabajo
3. Perno de bloqueo de ruedas en posición de exclusión
4. Regulación ruedas en función de los neumáticos
5. Cárter transmisión final de correas
6. Perno bloqueo ruedas (BladeRunner 90 y 110 cm)
7. Engrasadores para carretes de ruedas
8. Cuchillas
9. Rodillo posterior BladeRunner (accesorio)
10 Patín BladeRunner (accesorio)
11. Rodillo posterior RollerBlade
12. Protecciones
13. Protección cárter de transmisión
14. Embridado PTO máquina
5. IDENTIFIZ. STEUERUNGEN UND EINRICHTUNGEN
DE
DE
Abb. 5/1 - 5/2 - 5/3 - 5/4 - 5/5
1. Hebel zur Einstellung der Arbeitshöhe
2. Klemmbolzen Räder in Arbeitsstellung
3. Klemmbolzen Räder in Abschaltstellung
4. Einstellung der Räder je nach Bereifung
5. Abdeckung Riemenendgetriebe
6. Klemmbolzen Räder (BladeRunner 90 und 110 cm)
7. Schmiernippel für Achsschenkel der Räder
8. Messer
9. Hintere BladeRunner-Rolle (Zubehör)
10 BladeRunner-Schaltstein (Zubehör)
11. Hintere RollerBlade-Rolle
12. Schutzwand
13. Schutzabdeckung Getriebe
14. Geräte-Zapfwellenflansch
28
6. ISTRUZIONI D’USO (BR)_P1 10-16 rev. 0
6. ISTRUZIONI D’USO
6.1
IT
IT
6.1 Formazione operatore
Attenzione! La macchina è stata progettata per l'uso
indicato al paragrafo 0. INTRODUZIONE; è assolutamente
vietato l’uso per scopi diversi (trasporto persone, traino,
gare di qualsiasi tipo, circolazione su strade pubbliche,
ecc.); non deve essere modificata o manomessa.
Attenzione! Non mettere mani o piedi in prossimità
delle zone di lavoro, su parti in movimento o in rotazione.
Attenzione! Prima di usare la macchina è assoluta-
mente necessario familiarizzare con i comandi, imparare a
spegnere il motore in modo sicuro e rapido, leggere le av-
vertenze di sicurezza.
Attenzione! Non permettere l’uso della macchina a
minori di età o a persone non esperte; non trasportare
passeggeri; non operare vicino a fossati o banchine che
possono cedere col peso della macchina.
Attenzione! Per l’uso della macchina è obbligatorio
usare adeguati mezzi di protezione individuali (DPI), scar-
pe antinfortunistiche, cuffie, occhiali, guanti da lavoro, ecc.
6. INSTRUCTION FOR USE
6.1
EN
EN
6.1 Operator training
Warning! The machine has been designed for the use
indicated on paragraph 0. INTRODUCTION; it's strictly for-
bidden to use it for other purposes (transporting persons,
as a trailer, any type of racing, run on public roads, etc.); it
must neither be changed nor tampered with.
Warning! Do not put your hands or feet near the work
zones or moving or rotating parts.
Warning! Before using the machine, you need abso-
lutely to familiarize with the controls, learn how to turn off
the engine safely and quickly, read the safety instructions.
Warning! Do not allow the use of the machine to mi-
nors, to non-experts, do not carry passengers, do not ope-
rate near channels or docks that can collapse under the
weight of the machine.
Caution! For the use of the machine is required to
use appropriate personal protective equipment (PPE) safe-
ty shoes, ear protections, goggles, gloves, etc.
6. INSTRUCTIONS D’UTILISATIONS
6.1
FR
FR
6.1 Formation de l'opérateur
Attention! La machine a été conçue pour l'utilisation
indiquée au paragraphe 0. INTRODUCTION; il est absolu-
ment interdit de l’utiliser à des fins différentes (transport de
personnes, remorquage, compétitions de tout genre, circu-
lation sur routes publiques etc.); elle ne doit être ni modifié,
ni falsifiée.
Attention! Ne pas mettre les mains ou les pieds à
proximité de la zone de travail, sur des parties en mouve-
ment ou en rotation.
Attention!
A
vant d’utiliser la machine il est absolu-
ment nécessaire de se familiariser avec les commandes,
apprendre à éteindre le moteur de manière sûre et rapide,
lire les avertissements de sécurité.
Attention! Interdire l’utilisation de la machine aux mi-
neurs et à des personnes non qualifiée; ne pas transporter
des passagers, ne pas travailler près de fossés ou acco-
tements qui pourraient céder sous le poids de la machine.
Attention! Pour l’utilisation de la machine, il est obli-
gatoire d’utiliser des moyens appropriés de protection indi-
viduels (DPI), des grosses chaussures, un casque, des lu-
nettes, des gants de travail, etc.
6. INSTRUCCIONES DE USO
6.1
ES
ES
6.1 Formación operador
¡Atención! La máquina se ha proyectado para el uso
indicado en el capitulo 0. INTRODUCCIÓN; está prohibido
usarla para fines distintos (transporte de personas, arra-
stre, competiciones de ningún tipo, circulación en carrete-
ras públicas, etc.), no debe modificarse ni manipularse.
¡Atención! No poner nunca las manos o los pies cer-
ca de la zonas de trabajo, en piezas en movimiento o en
rotación.
¡Atención! Antes de usar la máquina es estrictamen-
te necesario familiarizarse con los mandos
,
a
p
render a
apagar el motor de manera rápida y segura, leer las ad-
vertencias de seguridad.
¡Atención! No se debe permitir el uso de la máquina
a los menores de edad ni a personas que no sean ex-
pertas; no se deben transportar pasajeros, no trabajar
cerca de fosos o arcenes que puedan ceder con el peso
de la máquina.
¡Atención! para el uso de la máquina, es obligatorio
utilizar medios de protección individual (DPI) adecuados,
calzado de seguridad, auriculares, gafas, guantes de tra-
bajo, etc.
6. GEBRAUCHANWEISUNG
6.1
DE
DE
6.1 Einweisung der Bedienperson
Achtung! Das Gerät wurde zu dem unter Abschnitt 0.
EINLEITUNG angegebenen Verwendungszweck entwickelt
und gebaut; das Gerät für andere Zwecke zu verwenden
(Transport von Personen, als Zugfahrzeug, für Rennen be-
liebiger Art, Straßenverkehr usw.) Die Maschine weder
abändern noch manipulieren.
Achtung! Weder Hände noch Füße nähe die Bewe-
gungs bzw. Rotationsmechanismen legen.
Achtung! Vor Gebrauch der Maschine ist es unbe-
dingt notwendig, dass sich die Bedienperson mit den Ste-
uerungen vertraut gemacht hat, gelernt hat, den Motor
schnell und sicher abzuschalten und die Sicherheitshin-
weise gelesen und verstanden hat.
Achtung! Jugendlichen unter Jahren darf und uner-
fahren Personen der Gebrauch der Maschine nicht ge-
stattet werden; es dürfen keine Personen transportiert und
es darf auch nicht in der Nähe von Gräben oder Erdwällen
gearbeitet werden, da diese unter dem Gewicht der Ma-
schine nachgeben könnten.
Achtung! Für den Gebrauch der Maschine ist geei-
gnete Personenschutzausrüstung (PSA) zu verwenden,
29
6. ISTRUZIONI D’USO (BR)_P2 10-16 rev. 0
6.2
6.3
IT
IT
Non fare interventi di pulizia o manutenzione alla macchina
senza osservare le avvertenze di sicurezza contenute in
questo manuale e nel manuale specifico di ogni unità mo-
trice. Prima di avviare la macchina è necessario conoscere
i dispositivi e protezioni di sicurezza ed i comandi.
6.2 Controlli prima di avviare la macchina. Controllare:
- che l'olio sia a livello (13 fig.13/1);
- che il cambio dell’unità motrice sia in posizione di folle;
- che la PTO dell’unità motrice sia in posizione di folle;
- che l'attrezzatura sia pulita e libera da impedimenti.
6.3 Regolazione altezza di lavoro e manubrio
Non effettuare interventi senza prima aver spento
il motore e staccato l'attrezzo dal corpo macchina.
1. Ruotine anteriori BladeRunner: l’attrezzo è stato pro-
gettato per lavorare con o senza l’impiego delle ruotine
anteriori retrattili (fig.5/1) che vanno bloccate nella posizio-
ne prescelta mediante i perni 2 oppure 3.
1.1 Posizionamento ruotine
: quando si impiegano le ruoti-
ne, queste possono essere posizionate a 3 altezze diverse
6.2
6.3
EN
EN
Don’t do any cleaning or maintenance operations to the
machine or parts of the implement without observing the
safety instructions contained in this manual and in the spe-
cific manual of the engine unit. Before you switch on the
machine, you must know the devices and safety features
and controls.
6.2 Checks prior to starting the machine. Check that:
- the oil is at a certain level (13 fig.13/1);
- the gearstick of the engine unit is in neutral;
- the PTO of the engine unit is in neutral;
- the implements are clean and free from impediments.
6.3 Adjusting working height and handlebar
Always power off the engine and detach the tool
from the machine prior to performing any maintenance
interventions.
1. BladeRunner front wheels: the tool is designed to be
operated with or without retractable front wheels (Fig.5/1),
which should be locked in the desired position using the
pins 2 or 3.
1.1 Positioning the wheels: when the wheels are used,
they can be set at 3 different heights
6.2
6.3
FR
FR
Ne pas faire d’interventions de nettoyage ou d’entretien à
la machine sans accorder une attention particulière aux
avertissements de sécurité contenu dans ce manuel ou
dans le manuel spécifique de chaque unité de commande.
Avant d’allumer la machine, il faut connaître les dispositifs
et les protections de sécurité et les commandes.
6.2 Contrôles avant de faire démarrer la machine.
Contrôler que:
- l'huile soit à niveau (13 fig.13/1);
- la boîte de vitesse du groupe moteur soit au point mort;
- le levier PTO du groupe moteur soit au point mort;
- les équipements montés soient propre et libre d’obstacles
6.3 Réglage de la hauteur de travail et le guidon
Ne pas effectuer d’interventions sans avoir
d’abord éteint le moteur et débranché l’outil du corps
de la machine.
1. Petites roues antérieures BladeRunner: l’outil a été
projeté pour travailler avec ou sans l’utilisation des petites
roues antérieures rentrantes (fig.5/1) qui seront bloquées
sur la position choisie par les pivots 2 ou 3.
1.1 Positionnement des petites roues: quand on utilise
les petites roues, elles peuvent être positionnées à 3 hau-
teurs différentes
6.2
6.3
ES
ES
No se debe realizar intervenciones de limpieza o manteni-
miento en la máquina sin cumplir las advertencias de se-
guridad que contiene este manual y el manual especifico
de cada equipo. Antes de poner en marcha la unidad mo-
triz, es necesario conocer los dispositivos y las proteccio-
nes de seguridad, ademós de los mandos.
6.2 Controles antes de poner en marcha la máquina
controlar que: - el nivel de aceite sea correcto (13 fig.13/1);
- el cambio del grupo motor esté en punto muerto;
- la palanca PTO del grupo motor esté en punto muerto;
- el equipo montado esté limpio y libre de impedimientos.
6.3 Ajuste de la altura de trabajo y el manillar
No se pueden realizar operaciones en la máquina
sin haber apagado antes el motor y haber quitado la
herramienta del cuerpo de la máquina.
1. Ruedas delanteras BladeRunner: la herramienta ha
sido ideada para trabajar con o sin el uso de las ruedas
delanteras retráctiles (fig. 5/1) que deben bloquearse en la
posición elegida mediante los pernos 2 o bien 3.
1.1 Colocación ruedas: cuando se emplean las ruedas,
estas pueden colocarse en 3 alturas diferentes
6.2
6.3
DE
DE
d.h. Arbeitsschuhe, Gehörschutz, Schutzbrille, Arbeitshand-
schuhe usw. Es dürfen keine Reinigungs- oder Wartungs
arbeiten an der Maschine ausgeführt werden, wenn die in
der vorliegenden Bedienungsanleitung enthaltenen Sicher-
heitsanweisen nicht beachtet wurden. Vor Einschaltung der
Maschine muss die Bedienperson mit den verschiedenen
Sicherheitseinrichtungen und Steuerungen vertraut sein.
6.2 Vor Einschaltung des Maschine prüfen. Prüfen dass:
- des Ölstand ordnungsgemäß ist (13 Abb.13/1);
- das Getriebe des Motoraggregats in Neutralstellung steht;
- der Hebel der Zapfwelle in des Motoraggregats in Neu-
tralstellung steht;
- die Ausrüstung sauber ist und frei läuft.
6.3 Arbeitshöhe einstellen und Lenker
Keine Arbeiten ausführen, ohne zuvor den Motor
abgeschaltet und das Anbaugerät vom Gerätekörper
entfernt zu haben.
1. Vorderräder BladeRunner: Das Anbaugerät wurde für
den Einsatz mit oder ohne einziehbare Vorderräder (Abb.
5/1) vorgesehen; diese werden anhand der Bolzen 2 oder
3 in der gewünschten Stellung gesichert.
1.1 Räder positionieren: Bei Verwendung der Räder sind
diese in 3 verschiedenen Stellungen höhenverstellbar;
30
6. ISTRUZIONI D’USO (BR)_P3 10-16 rev. 0
6.3
IT
IT
tramite il perno 4 fig.5/1 permettendo così di adeguare la
posizione del trinciaerba al diametro dei pneumatici monta-
ti sulla macchina.
1.2 Bloccaggio ruotine:
solo per i modelli 90 e 110 cm, le
ruotine sono bloccabili durante il lavoro in pendenza tra-
mite il perno 6.
1.3 Altezza di taglio: è regolabile in modo semplice e conti-
nuo agendo sulla manovella 1 fig.5/1; le misure, in configu-
razione standard, vanno da 2 a 7,5 cm.
NOTA: l’altezza di taglio può scendere fino a 0,5 cm esclu-
dendo le ruotine anteriori e montando il rullo antiscalpo 9
fig.5/1 (fornibile a richiesta) e senza i pattini 10.
2. Rullo posteriore RollerBlade: la regolazione di altezza
di taglio del RolleBlade si ottiene regolando il rullo poste-
riore 11 fig.5/3 tramite l'apposita leva 1 fig.5/2. L'altezza di
taglio è regolabile
da 0,5 a 7,5 cm.
3. Regolazione manubrio: il manubrio può essere sposta-
to lateralmente, su entrambi i lati, nel caso vi sia la pre-
senza di arbusti o cespugli che possano ostacolare l'ope-
ratore durante il lavoro.
6.3
EN
EN
using the pin 4 fig.5/1, adjusting the position of the mulcher
to the diameter of the tires assembled onto the machine.
1.2 Locking the wheels:
for the 90 and 110 cm models
only, the wheels are locked when operating on sloped
terrain using the pin 6.
1.3 Cutting height:
simply and continuously adjustable
using the crank 1 fig.5/1; in standard configuration, the
measurements range from 2 to 7.5 cm.
NOTE: the cutting height can be as low as 0.5 cm by ex-
cluding the front wheels and assembling the anti-scalp
roller 9 fig.5/1 (supplied on request) and without the run-
ners 10.
2. RollerBlade rear roller: the RollerBlade cutting height
can be set using the rear roller 11 fig.5/3 using the lever 1
fig.5/2. The cutting height can be set
from 0.5 to 7.5
cm.
3. Handlebar setting: the handlebar can be shifted late-
rally on both sides, in the event that bushes or shrubs
hinder the machine operator during work operations.
6.3
FR
FR
par le pivot 4 fig.5/1 en permettant ainsi d’adapter la posi-
tion du broyeur au diamètre des pneumatiques montés sur
la machine.
1.2 Blocage des petites roues:
seulement pour les modè-
les 90 et 110 cm, les petites roues peuvent être bloquées
pendant le travail en pente par le pivot 6.
1.3 Hauteur de coupe:
elle est réglable de façon très
simple et continue en agissant sur la manivelle 1 fig.5/1;
les dimensions, en configuration standard, vont de 2 à 7,5
cm.
NOTE: la hauteur de coupe peut descendre jusqu’à 0,5 cm
en excluant les petites roues antérieures et en montant le
rouleau antiscalp 9 fig.5/1 (envoyé sur demande) et sans
les patins 10.
2. Rouleau postérieur RollerBlade: le réglage de hauteur
de coupe du RollerBlade s’obtient en réglant le rouleau
postérieur 11 fig. 5/3 par le levier approprié 1 fig.5/2. La
hauteur de coupe est réglable
de 0,5 à 7,5 cm.
3. Réglage du volant: le volant peut être déplacé latérale-
ment, sur les deux côtés, s’il y a la présence d’arbustes ou
de buissons qui peuvent entraver l’opérateur pendant son
travail.
6.3
ES
ES
mediante el perno 4 fig.5/1 permitiendo de este modo
adaptar la posición de la trituradora de hierba al diámetro
de los neumáticos montados en la máquina.
1.2 Bloqueo ruedas:
solo para los modelos 90 y 110 cm,
las ruedas pueden bloquearse, mientras se trabaja en
terreno con pendiente, mediante el perno 6.
1.3 Altura de corte:
es regulable de manera sencilla y con-
stante con la manivela 1 fig.5/1; las medidas, en configu-
ración estándar, van de 2 a 7,5 cm.
NOTA: la altura de corte puede bajar hasta 0,5 cm exclu-
yendo las ruedas delanteras y montando el rodillo anti-
calvas 9 fig.5/1 (opción bajo pedido) y sin patines 10.
2. Rodillo posterior RollerBlade: la regulación de la altu-
ra de corte del RolleBlade se obtiene regulando el rodillo
posterior 11 fig.5/3 mediante la palanca 1 fig.5/2. La altura
de corte puede regularse
de 0,5 a 7,5 cm.
3. Regulación manillar: el manillar puede desplazarse la-
teralmente, a ambos lados, en caso de que haya pre-
sencia de arbustos o matorral que puedan obstaculizar al
operador durante el trabajo.
6.3
DE
DE
hierzu den Bolzen 4 Abb.5/1 verwenden. Dadurch lässt
sich die Position des Mulchers dem Durchmesser der am
Gerät verwendeten Reifen anpassen.
1.2 Räderblockierung:
Nur bei den Modellen 90 und 110
cm lassen sich die Rader während der Arbeit an Hängen
anhand des Bolzens 6 blockieren.
1.3 Mähhöhe:
Diese lässt sich einfach und fortwährend an
der Kurbel 1 Abb.5/1 einstellen; bei der Standardausfüh-
rung liegen die Maße zwischen 2 und 7,5 cm.
Hinweis: Die Mähhöhe lässt sich auf bis zu 0,5 cm redu-
zieren; hierzu sind die Vorderräder zu entfernen und das
Stützrad 9 Abb.5/1 (auf Anfrage lieferbar) ohne Gleitkufen
10 anzubringen.
2. Hinterrad RollerBlade: Die Einstellung der Mähhöhe
des RollerBlade wird an der hinteren Rolle 11 Abb.5/3 am
entsprechenden Hebel 1 Abb.5/2 vorgenommen. Die Mäh-
höhe kann auf einen Wert zwischen
0,5 und 7,5 cm
eingestellt werden.
3. Lenkereinstellung: Der Holm lässt sich an beiden Sei-
ten seitlich wegschwenken, falls Büsche oder Sträucher
die Bedienperson bei seiner Arbeit behindern sollten.
31
6. ISTRUZIONI D’USO (BR)_P4 10-16 rev. 0
6.4
IT
IT
6.4 Tipologia di coltelli e orientamento
Sono previsti 3 tipi diversi di coltelli:
1) la fig.6/1 mostra i coltelli standard A piegati, montati a Y
2) la fig.6/2 mostra i coltelli standard A ma con un coltello
diritto B montato in mezzo ai due coltelli A, i coltelli B sono
disponibili separatamente e servono per sminuzzare ulte-
riormente il materiale trinciato
3) la fig.6/3 mostra un coltello a forma di pala C e serve
per tagliare l'erba con il trincia e lasciare lo stelo meno sfi-
lacciato per evitare
l'ingiallimento della punta.
Anche questi coltelli sono disponibili separatamente.
NOTA:
I coltelli A e B si possono affilare o girare per essere uti-
lizzati in modo più completo, il coltello C può essere solo
affilato.
Attenzione, prima di smontare i coltelli, osservare come
sono montati, non smontare mai i coltelli senza tenere un
riferimento per il rimontaggio.
6.4
EN
EN
6.4 Type of cutting blades and orientation
3 different types of cutting tools are available:
1) fig.6/1 shows the standard cutting tools A, folded and
assembled in a Y formation
2) fig.6/2 shows the standard cutting tools A, but with a
straight cutting tool B assembled in the middle of the two
cutting tools A; the cutting tools B are available separately
and are used to further mulch the hay
3) fig.6/3 shows a cutting tool in the shape of a shovel C
and is used to cut hay with the mulcher, leaving the stem
less frayed in order to prevent the yellowing of the tip.
These cutting tools are also available separately.
NOTE:
The cutting tools A and B can be sharpened or turned to
be used in more completely; the cutting tool C can only be
sharpened.
Caution: prior to disassembling the cutting tools, carefully
observe how they are assembled; never disassemble the
cutting tools without establishing a reference point for re-
assembling them.
6.4
FR
FR
6.4 Typologie de couteaux et orientation
3 différents types de couteaux ont été prévus:
1) la fig.6/1 montre les couteaux standard A pliés, montés
à Y
2) la fig.6/2 montre les couteaux standard A mais avec un
couteau droit B monté au milieu des deux couteaux A, les
couteaux B sont disponibles séparément et servent pour
déchiqueter encore plus le matériel décou
3) la fig.6/3 montre un couteau à forme de pelle C et sert
pour couper l’herbe avec le broyeur et laisser la tige moins
effilochée pour éviter le jaunissement de la pointe.
Ces couteaux sont aussi disponibles séparément.
NOTE:
Les couteaux A et B peuvent être affûtés ou tournés pour
être utilisés de façon plus complète, le couteau C peut être
seulement affûté.
Attention, avant de démonter les couteaux, il faut obser-
ver la façon dont ils sont montés, ne jamais démonter les
couteaux sans garder une référence pour le remontage.
6.4
ES
ES
6.4 Tipo de cuchillas y orientación
Hay 3 tipos diferentes de cuchillas:
1) la fig.6/1 muestra las cuchillas estándar A plegadas y
montadas en Y
2) la fig.6/2 muestra las cuchillas estándar A pero con una
cuchilla recta B montada entre las dos cuchillas A. Las
cuchillas B están disponibles por separado y sirven para
desmenuzar el material previamente triturado
3) la fig.6/3 muestra una cuchilla con forma de pala C y
sirve para cortar la hierba con la trituradora y dejar el tallo
menos deshilachado, lo que evita que la punta amarillee.
También estas cuchillas se suministran por separado.
NOTA:
Las cuchillas A y B pueden afilarse o girarse para utilizar-
las de forma más completa. La cuchilla C solo puede afi-
larse.
Atención: antes de desmontar las cuchillas, observar có-
mo están montadas. No deben desmontarse nunca las cu-
chillas sin tener una referencia para poder volver a mon-
tarlas.
6.4
DE
DE
6.4 Art der Messer und Ausrichtung
Es sind 3 verschiedene Messer vorgesehen:
1) In Abb.6/1 sind die gebogenen Standardmesser A, Y-
förmig montiert dargestellt
2) In Abb.6/2 sind die Standardmesser A, aber mit gera-
dem, in der Mitte zwischen den beiden Messern A mon-
tiertem Messer B dargestellt; die Messer B sind separat
erhältlich und sind dazu da, das gemähte Gras weiter zu
zerkleinern.
3) In Abb.6/3 ist ein Schaufelförmiges Messer C darge-
stellt, das dazu verwendet wird, das Gras mit dem Mulcher
zu mähen, wobei der Stängel weniger ausfranst und ver-
mieden wird, dass die Spitze schnell verwelkt.
Diese Messer sind ebenfalls separat erhältlich.
HINWEIS:
Die Messer A und B lassen sich schleifen oder für einen
vollständigen Einsatz wenden, das Messer C lässt sich
hingegen nur schleifen.
Achtung, vor Demontage der Messer ist zu beachten, wie
diese angebracht sind; die Messer dürfen nie alle
demontiert werden, ohne dass ein Bezug für den
Wiedereinbau vorhanden ist.
33
7. MONTAGGIO AL GRUPPO MOTORE (BR)_P1 10-16 rev. 0
7. MONTAGGIO AL GRUPPO MOTORE
IT
IT
Attenzione: per tutte le operazioni di montaggio, ripara-
zione ed uso servirsi di guanti da lavoro. Gli attrezzi A com-
presi nel manuale sono utilizzabili solo se montati anterior-
mente al Gruppo Motore B (fig.7/1).
Pericolo: per nessun motivo e per evitare di ferirsi, non
utilizzare mai gli attrezzi in modi diversi o con manubrio gira-
to.
Per l’applicazione, togliere dadi e rondelle dal coperchio di prote-
zione PTO (C fig.7/2), montare l'attrezzo sulla flangia PTO della
macchina, rimontare rondelle e dadi e serrare a fondo i dadi.
7. ASSEMBLY TO THE MOTOR UNIT
EN
EN
Attention: for all assembly and repair operations, always
wear heavy work gloves to protect your hands. The imple-
ments A included in this manual are used only if mounted in
front of the Motor Group B (fig.7/1).
Dangerous: for no reason and to avoid injury, don’t use
never the implements in different ways or with the turned
handlebars.
For the application, remove nuts and washers from PTO protec-
tion cover (C fig.7/2) of the machine, mount the implement on
PTO flange, remounting washers and nuts and tighten them
strongly.
7. MONTAGE AU GROUPE MOTEUR
FR
FR
Attention: pour toutes les opérations de montage, repa-
ration et utilisation mettre les gants de travail. Les outils A
inclus dans le manuel peuvent être utilisées seulement si
sont montée avant du Group Moteur B (fig.7/1).
Danger: en aucun cas et pour éviter de se blesser, ne ja-
mais utiliser les outils de manière différente ou avec le gui-
don tourné.
Pour l’application, enlever les écrous et les rondelles du couvercle
de protection PTO (C fig.7/2), monter l'outil sur la bride PTO de la
machine, remonter les rondelles et les écrous et serrer à fond les
écrous.
7. MONTAJE EN EL GRUPO MOTOR
ES
ES
Atención: para todas las operaciones de montaje, repa-
ración y uso, usar guantes de trabajo. Las herramientas A
incluidas en el manual sólo se pueden utilizar si se monta
antes de la maquina B (fig.7/1).
Peligro: nunca, bajo ningún concepto, y para evitar ade-
más resultar herido, hay que utilizar las hierramientas de
manera diferente a la indicada o con el manillar girado.
Para colocarlo, quitar las tuercas y arandelas de la tapa de pro-
tección PTO (C fig.7/2), montar el hierramienta en la brida PTO de
la máquina, volver a montar las arandelas y tuercas y apretar
estas últimas a tope.
7. MONTAGE AN DAS MOTORAGGREGAT
DE
DE
Achtung: für alle Montage, Reparatur und Gebrauchs-
arbeiten Handschuhe immer anziehen. Die in diesem Hand-
buch enthaltenen Geräte A werden nur verwendet, wenn sie
vor der Maschine montiert sind B (Abb.7/1).
Gefahr: Ohne Grund und ohne Verletzungen die Geräte
niemals auf unterschiedliche Weise oder mit gedrehtem
Lenker verwenden.
Zum Anbringen des Geräte die Muttern und Unterlegscheiben von
der Schutzabdeckung der Zapfwelle (C Abb.7/2) entfernen, den
Häufelpflug am Flansch der Gerätezapfwelle montieren, Unter-
legscheiben und Muttern wieder anbringen und die Muttern feste
anziehen.
fig.7/2
C
.fig.7/1.
A
B
.fig.8/1.
D
34
8. PROVA DI FUNZIONAMENTO (BR)_P1 10-16 rev. 0
8. PROVA DI FUNZIONAMENTO
IT
IT
Verificare l'efficienza dei dispositivi di sicurezza.
Questi dispositivi danneggiati o manomessi possono es-
sere causa di incidenti per l'operatore.
1) Prima di avviare il motore, leggere le istruzioni della mac-
china e del motore, quindi avviare, tirare la leva frizione ed
innestare la Presa di Forza.
2) Per controllare che l'attrezzo giri regolarmente, sollevare
da terra l'attrezzo e rilasciare la leva frizione.
3) Prima di iniziare a lavorare verificare che i dispositivi di si-
curezza siano efficienti, rilasciando le leve frizione e motor
stop il motore si deve spegnere all’istante.
Sulle macchine con frizione idraulica PowerSafe il motore ri-
mane acceso ma cambio e PTO si fermeranno all’istante.
4) Per iniziare a lavorare, a frizione tirata, innestare la PTO
ed una marcia adeguata di avanzamento, quindi rilasciare la
frizione.
5) Per fare pratica con la macchina consigliamo di utilizzare
una marcia lenta.
6) Con motore diesel occorre bilanciare la macchina, allo
scopo è disponibile un kit zavorre D fig.8/1 come accessorio.
8. OPERATIONAL TEST
EN
EN
Check the efficiency of the safety devices. The devi-
ces damaged or tampered could be cause of accidents for
the user.
1) Before to start up the engine, read the instructions of ma-
chine and engine, pull the clutch lever and engage the PTO.
2) To check if the implement turn regularly, raise it from soil
and release the clutch lever.
3) Before to start to work verify if the safety devices are
efficient, releasing the clutch lever and motor-stop the engine
has switch off at once.
On machines with PowerSafe hydraulic clutch the engine re-
main switch on, but gears and PTO will be stopped at once.
4) To begin work, with pulled clutch lever, engage the PTO
and a proper forward speed, then release the clutch.
5) To learn the use of the machine, we suggest to use a low
speed.
6) With diesel engine is necessary to balance the machi-
ne, to do that is available a kit of weights D fig.8/1 as acces-
sory.
8. ESSAI DE FONCTIONNEMENT
FR
FR
Vérifier l’efficacité des dispositifs de sécurité. Ces di-
spositifs endommagés ou altérés peuvent être la cause de
accidents pour l’opérateur.
1) Avant de mettre en marche le moteur, lire les instructions
de la machine et du moteur, tirer le levier d’embrayage et
enclencher la prise de force.
2) Pour contrôler que l'outil tourne régulièrement, soulever
de terre l' outil et relâcher le levier d’embrayage.
3) Avant de commencer à travailler vérifier que les dispo-
sitifs de sécurité soient performants, en relâchant le levier de
embrayage et le motor stop, le moteur doit s’éteindre immé-
diatement.
Sur les machines avec embrayage hydraulique PowerSafe, le
moteur reste allumé, mais la boîte à vitesses et la PTO s’arrê-
tent immédiatement.
4) Pour commencer à travailler, avec l’embrayage tiré, en-
clencher la prise de force et une vitesse adaptée d’avance-
ment, puis relâcher l’embrayage.
5) Pour s’entraîner avec la machine, nous conseillons de
l’utiliser à une vitesse lente.
6) Avec un moteur diesel, il faut équilibrer la machine,
dans ce but, un kit de lests D fig.8/1 est disponible comme ac-
cessoire.
8. PRUEBA DE FUNCIONAMIENTO
ES
ES
Controlar el buen funcionamiento de los dispositivos
de seguridad. Estos dispositivos dañados o manipulados
pueden ser causa de accidentes para el operador.
1) Antes de poner en marcha el motor, hay que leer las
instrucciones de la máquina y del motor, tirar de la palanca de
embrague y meter la toma de fuerza PTO.
2) Para controlar que el aperos gire de forma regular, le-
vantarlo del suelo y soltar la palanca del embrague.
3) Antes de empezar a trabajar comprobar que los disposi-
tivos de seguridad funcionen correctamente; soltando las pa-
lancas de embrague y motor stop, el motor se tiene que apa-
gar al instante.
En las máquinas con embrague hidráulico PowerSafe, el mo-
tor se queda encendido pero el cambio y la PTO se detendrán
al instante.
4) Para empezar a trabajar, después de haber tirado del em-
brague, meter la toma de fuerza y una marcha adecuada de
avance y, a continuación, soltar el embrague.
5) Para practicar con la máquina aconsejamos utilizar una
marcha lenta.
6) Con el motor diesel hay que equilibrar la máquina, para
ello hay un kit de lastres D fig.8/1 disponible como accesorio.
8. BETRIEBSPRÜFUNG
DE
DE
Die Sicherheitsvorrichtungen auf ihren ordnungsge-
mäßen Funktionszustand prüfen. Beschädigte oder mani-
pulierte Vorrichtungen können Arbeitsunfälle verursachen
1) Vor Inbetriebnahme des Motors die Geräte- und Motoran-
weisungen lesen, den Kupplungshebel ziehen und die Zapf-
welle einlegen.
2) Damit das Gerät ordnungsgemäß dreht, muss es vom
Boden abgehoben und der Kupplungshebel gelöst werden.
3) Vor Gebrauch sind die Sicherheitsvorrichtungen auf ihren
ordnungsgemäßen Funktionszustand zu prüfen; hierzu die
Schalthebel der Kupplung und des Motorstopps loslassen; der
Motor muss sofort ausgehen. An den Geräten mit hydrauli-
scher PowerSafe Kupplung läuft der Motor weiter, aber Ge-
triebe und Zapfwelle halten augenblicklich an.
4) Um mit der Arbeit beginnen zu können, sind bei angezo-
gener Kupplung die Zapfwelle und ein geeigneter Vorwärts-
gang einzulegen; die Kupplung daraufhin loslassen.
5) Zum Einüben in den Gerätebetrieb empfehlen wir den
Gebrauch eines niedrigen Gangs.
6) Bei Dieselmotoren muss das Gerätegewicht gleichmä-
ßig verteilt werden; hierzu ist als Zubehör ein Satz Zusatzge-
wichte D Abb.8/1 erhältlich.
35
9. INFORMAZIONI UTILI (BR)_P1 10-16 rev. 0
9. INFORMAZIONI UTILI
9.1
IT
IT
9.1 Generalità
1) Il trinciaerba è un attrezzo professionale applicato fron-
talmente, specifico per motocoltivatori; può essere applica-
to anche alle motofalciatrici.
Serve per mantenere puliti da erbacce quei terreni che non
necessitano di un taglio perfettamente rasato e della rac-
colta (terreni scoscesi, terreni rustici, sottobosco ecc.).
2) La trasmissione ai coltelli è ottenuta tramite alberi ed in-
granaggi in acciaio ad alta resistenza e funzionanti a ba-
gno d'olio e con una trasmissione finale a cinghie.
3) In caso di difficoltà durante il lavoro è sufficiente rila-
sciare la leva motor-stop, un freno interno blocca la rota-
zione dell'attrezzo all'istante.
4) Il lavoro può essere eseguito in prima o seconda ve-
locità compatibilmente con la tipologia del terreno.
IMPORTANTE: Il trinciaerba non è una fresa, non
deve mai lavorare a contatto del terreno.
Controllare il terreno prima di procedere nel lavoro,
che non vi siano sassi, bastoni, tubi da irrigazione o
corpi estranei.
9. USEFUL INFORMATION
9.1
EN
EN
9.1 General information
1) The flail mower is a professional tool frontally applied,
designed specifically for walking tractors but can also be
used with the mowing machines.
Used to keep clean from weeds those soils that do not
require a perfectly shaved cutting and collection (steep
terrain, rustic terrains, underwood, etc..).
2) The transmission to the knives is obtained by mean of
shafts and gears in high quality tempered steel, functioning
in oil bath and a final transmission with belts.
3) In case of difficulty during the work it is sufficient to
release the motor-stop lever, an internal brake blocks the
rotation of implement instantly.
4) The work can be carried out in first or second speed
compatibly with the consistency of the ground.
IMPORTANT: The flail mower is not a rotary hoe,
never must work in contact of the soil.
Before to start to work, make sure that there are no
stones, sticks, irrigation pipes or foreign bodies in the
ground.
9. INFORMATIONS UTILES
9.1
FR
FR
9.1 Généralités
1) Le broyeur est un outil professionnel appliqué de front,
spécifique pour les motoculteurs; il peut être appliqué
aussi aux motofaucheuses. Il sert pour maintenir propres
des mauvaises herbes les terrains qui n’ont pas besoin de
une coupe parfaitement tondue et de ramassage (terrains
escarpés, terrains rustiques, sous-bois, etc.).
2) La transmission aux couteaux est obtenue par les ar-
bres et engrenages en acier à haute résistance et fonc-
tionnants à bain d’huile et avec une transmission finale à
courroies.
3) En cas de difficulté pendant le travail, il suffit de relâcher
le levier motor-stop, un frein interne bloque la rotation de
l’outil à l’instant.
4) Le travail peut être effectué en première ou seconde
vitesse selon la typologie du terrain.
IMPORTANT: Le broyeur de végétaux n’est pas
une fraise, il ne doit jamais travailler en contact avec le
terrain.
Contrôler le terrain avant de procéder au travail, qu’il
n’y ait pas de pierres, bâtons, tuyaux d’irrigation ou
corps étrangers.
9. INFORMACIÓN ÚTIL
9.1
ES
ES
9.1 Generalidades
1) La trituradora de hierba es una herramienta profesional
específica para motocultores. También puede colocarse
en motosegadoras. Sirve para mantener limpios de hier-
bas aquellos terrenos que no necesitan un corte perfecto y
para los que no dan cosecha (terrenos escarpados, terre-
nos rústicos, maleza, etc.).
2) La transmisión a las cuchillas se obtiene mediante ár-
boles y engranajes de acero de alta resistencia y con fun-
cionamiento de baño de aceite, con una transmisión final
de correa.
3) En caso de dificultad durante el trabajo solo es necesa-
rio soltar la palanca motor-stop. Un freno interno bloquea
la rotación de la herramienta instantáneamente.
4) El trabajo puede efectuarse en primera o en segunda,
según el tipo de terreno.
IMPORTANTE: La trituradora de hierba no es una
fresa, no debe trabajar nunca en contacto con el terre-
no.
Controlar el terreno antes de empezar a trabajar com-
probando que no haya piedras, palos, tubos de riego o
cuerpos extraños.
9. NÜTZLICHE HINWEISE
9.1
DE
DE
9.1 Allgemeines
1) Der Mulcher ist ein professionelles Frontanbaugerät
spezifisch für Einachstraktoren; er kann auch an Motor-
mähern angebracht werden. Der Mulcher dient dazu,
solche Böden frei von Unkraut zu halten, bei denen kein
perfekter Mähvorgang erforderlich ist und das Mähgut nicht
aufgesammelt werden muss (steiniges, unbebautes Er-
dreich, Unterholz usw.).
2) Der Messerantrieb erfolgt durch hochwiderstandsfähige
Stahlwellen und -Zahnräder im Ölbad mit einem Riemen-
endantrieb.
3) Bei Schwierigkeiten während der Arbeit ist lediglich der
Motor-Stopp-Hebel loszulassen; eine interne Bremse hält
die Rotation des Anbaugerätes augenblicklich an.
4) Die Arbeit kann je nach Bodenbeschaffenheit in erster
oder zweiter Geschwindigkeit durchgeführt werden.
WICHTIG: Der Mulcher ist keine Bodenfräse und
darf folglich während des Betriebs nie mit dem Boden
in Kontakt treten.
Vor Arbeitsbeginn prüfen, dass das Gelände frei von
Steinen, Stöcken, Bewässerungsrohren oder sonsti-
gen Fremdkörpern ist.
36
10. PULIZIA (BR)_P1 10-16 rev. 0 / 11. RIMESSAGGIO E INATTIVITA’ PROLUNGATA (BR)_P1 10-16 rev. 0
10. PULIZIA
11. RIMESSAGGIO E INATTIVITA' PROLUNGATA
IT
IT
Per mantenere in efficienza la macchina consigliamo di ef-
fettuare giornalmente la pulizia e rimuovere polvere, fango,
foglie, erba secca o incrostata ecc.
Riporre la macchina in un ambiente asciutto, al riparo dalle
intemperie e, possibilmente, ricoprirla con un telo.
10. CLEANING 11. STORAGE AND PROLONGED INACTIVITY
EN
EN
To keep the machine in good working order it is recom-
mended that cleaning is carried out daily and that dust,
mud, leaves, dry or encrusted grass, etc. is removed.
Return the machine to a dry environment, sheltered
against bad weather and, if possible, cover it with a cloth.
10. NETTOYAGE 11. HIVERNAGE ET INACTIVITÉ PROLONGÉE
FR
FR
Pour maintenir toute l’efficacité de la machine nous con-
seillons d’effectuer tous les jours le nettoyage et enlever la
boue, les feuilles, l’herbe sèche ou incrustée, etc…
Ranger la machine dans un environnement sec, à l'abri
des intempéries et, si possible, la couvrir d'une toile
10. LIMPIEZA 11. DEPOSITO Y INACTIVIDAD PROLONGADA
ES
ES
Para mantener el buen funcionamiento de la máquina
aconsejamos efectuar diariamente la limpieza y eliminar el
polvo, barro, hojas, hierba seca o incrustada, etc.
Volver a poner la máquina en un ambiente seco, resguar-
dado de la imtemperie y, si es posible, recubrirla con una
lona.
10. REINIGUNG 11. EINLAGERUNG UND LÄNGERER
DE
DE
Zur Gewährleistung der hohen Leistungsfähigkeit von Ge-
rät sollten diese täglich gereinigt werden; dabei sind Staub,
Schmutz, Schlamm, Blätter und trockenes bzw. verkruste-
tes Gras usw. zu entfernen.
Das Gerät in einen trockenen, vor Witterung geschützten
Raum fahren und nach Möglichkeit mit einer Plane abde-
cken.
37
12. MOVIMENTAZIONE E TRASPORTO (BR)_P1 10-16 rev. 0 / 13. MANUTENZIONE E LUBRIFICAZIONE (BR)_P1 10-16 rev. 0
12. MOVIMENTAZIONE E TRASPORTO
13. MANUTENZIONE E LUBRIFICAZIONE
IT
IT
Se la macchina deve essere sollevata raccomandiamo di
posizionarla sopra a pallets (bancali), opportunamente le-
gata, e di sollevarla per mezzo di carrelli elevatori.
Per il peso della macchina, vedere sezione 3. CARATTE-
RISTICHE TECNICHE.
ATTENZIONE! Non riparare o lubrificare con orga-
ni in movimento.
Indossare indumenti adeguati e guanti da lavoro.
12. MOVEMENT AND TRANSPORT 13. MAINTENANCE AND LUBRICATION
EN
EN
If the machine must be lifted up, it is recommended that it
is placed on pallets, appropriately secured, and lifted using
fork-lift trucks.
For machine weight see section 3. TECHNICAL CHARAC-
TERISTICS.
CAUTION! Don’t repair or lubricate when the parts
are in movement.
Wear suitable clothing and work gloves.
12. DÉPLACEMENT ET TRANSPORT 13. ENTRETIEN ET LUBRIFICATION
FR
FR
Si la machine doit être soulevé, nous recommandons de la
positionner sur des palettes bien fixés et de la soulever au
moyen d’un chariot élévateur.
Pour le poids de la machine, voir section 3. CARACTÉ-
RISTIQUES TECHNIQUES.
ATTENTION! Ne pas réparer ou lubrifier si des or-
ganes sont en mouvement.
Porter vêtements appropriés et gants de travail.
12. MANEJO Y TRANSPORTE 13. MANTENIMIENTO Y LUBRICACIÓN
ES
ES
Si se tiene que izar la máquina, le recomendamos que la
coloque en palés, debidamente atados, y subirla con car-
retillas elevadoras.
Para el peso de la máquina, véase la sección 3. CARAC-
TERÍSTICAS TÉCNICAS.
¡ATENCIÓN! No se puede reparar ni lubricar con
los organos en movimiento.
Llevar puestas prendas adecuadas y
guantes de trabajo.
12. VERLAGERUNG UND TRANSPORT 13. WARTUNG UND SCHMIERUNG
DE
DE
Falls die Maschine angehoben werden sollen, sind diese
zunächst auf Paletten abzustellen, geeignet zu verstreben
und daraufhin unter Verwendung von Hubwagen anzuhe-
ben.
Das Gerätegewicht entnehmen Sie bitte dem Abschnitt 3.
TECHNISCHE MERKMALE.
Achtung! Laufende Bewegungsmechanismen dür-
fen weder instand gesetzt noch geschmiert werden.
Geeignete Arbeitskleidung sowie
Arbeitshandschuhe tragen.
38
13. MANUTENZIONE E LUBRIFICAZIONE (BR)_P2 10-16 rev. 0
13.1
IT
IT
Non disperdere mai nell'ambiente oli esausti, benzina
e ogni altro prodotto incendiante o inquinante; non fu-
mare; non lasciare fiamme libere.
Un'efficiente manutenzione e una corretta lubrificazio-
ne contribuiscono a mantenere la macchina in perfetta
efficienza.
13.1 Lubrificazione
Ogni 8 ore di lavoro ingrassare le forcelle delle ruotine A
fig.13/1, usare grasso Agip GREASE 30.
Ogni 50 ore di lavoro controllare il livello dell’olio nella sca-
tola ingranaggi per mezzo del tappo di livello B fig.13/2.
Ogni 200 ore di lavoro o una volta all'anno sostituire l’olio,
quantità totale contenuta circa 0,3 litri.
Sia per il ripristino che per la sostituzione, utilizzare olio
SAE 80W/90 EP.
13.1
EN
EN
Never disperse waste oil, petrol or any other incendia-
ry or polluting product into the environment. Don’t
smoke. Don’t leave naked flames around.
Efficient maintenance and correct lubrication contribu-
te towards keeping the machine in perfect working or-
der.
13.1 Lubrication
Every 8 work hours, grease the forks on the wheels A fig.
13/1, using Agip GREASE 30.
Every 50 work hours, check the oil level in the gearbox
using the oil level tap B fig.13/2.
Every 200 work hours, or once a year, change the total
quantity of oil, around 0.3 litres.
Use SAE 80W/90 EP oil to top off or change the oil.
13.1
FR
FR
Ne jamais répandre dans l'environnement des huiles
usées, essence ou tout autre produit inflammable ou
polluant; ne pas fumer; ne pas laisser des flammes li-
bres.
Un entretien efficace et une correcte lubrification con-
tribuent à garder la machine en parfait état.
13.1 Lubrification
Toutes les 8 heures de travail, il faut huiler les fourches
des petites roues A fig.13/1, utiliser l’huile Agip GREASE
30.
Toutes les 50 heures de travail, il faut contrôler le niveau
de l’huile dans la boîte des engrenages par le bouchon de
niveau B fig.13/2.
Toutes les 200 heures de travail ou une fois par an, il faut
substituer l’huile, quantité totale contenue environ 0,3 li-
tres.
Pour le remplissage ou pour la substitution, il faut utiliser
l’huile SAE 80W/90 EP.
13.1
ES
ES
No desechar en el medio ambiente aceites usados, ga-
solina o cualquier producto inflamable o contaminan-
te; no fumar ni dejar llamas libres.
Un mantenimiento efficiente y una correcta lubricación
contribuyen a mantener la máquina en perfecto funcio-
namiento.
13.1 Lubricación
Cada 8 horas de trabajo engrasar las horquillas de las
ruedas A fig.13/1, usar grasa Agip GREASE 30.
Cada 50 horas de trabajo, controlar el nivel de aceite en la
caja de engranajes mediante el tapón de nivel B fig.13/2.
Cada 200 horas de trabajo, o una vez al año, sustituir el
aceite (cantidad total contenida unos 0,3 litros).
Tanto para rellenar como para sustituirlo, utilizar aceite
SAE 80W/90 EP.
13.1
DE
DE
Altöl, Benzin sowie sämtliche entzündbaren oder um-
weltschädlichen Stoffe nicht zum normalen Müll ge-
ben; nicht rauchen, keine freien Flammen brennen las-
sen! Eine wirkungsvolle Wartung und entsprechende,
ordnungsgemäße Schmierung tragen zur langfristigen
hohen Leistungsfähigkeit des Geräts bei.
13.1 Schmieren
Alle 8 Betriebsstunden die Gabeln der Räder A Abb.
13/1 mit Fett der Sorte Agip GREASE 30 schmieren.
Alle 50 Betriebsstunden den Ölstand im Getriebegehäu-
se am Öldeckel B Abb.13/2 prüfen.
Alle 200 Betriebsstunden bzw. jährlich einen Ölwechsel
vornehmen; Gesamtmenge ca. 0,3 Liter.
Sowohl beim Auffüllen als auch beim Ölwechsel Öl der
Sorte SAE 80W/90 EP verwenden.
39
13. MANUTENZIONE E LUBRIFICAZIONE (BR)_P3 10-16 rev. 0
13.2
IT
IT
13.2 Sostituzione coltelli
OSSERVARE BENE L'ORIENTAMENTO DEI COLTELLI e
sostituirli una fila per volta per avere sempre un termine di
riferimento, in particolare i coltelli a pala che devono esse-
e orientati nel senso di rotazione, fig.13/3.
13.3 Regolazione cinghie
Le cinghie, alloggiate sotto il coperchio C fig.13/4, sono te-
nute sempre in tensione dal tendicinghie a molla D.
Il recupero del gioco è automatico e non occorre nessuna
registrazione. Sostituire le cinghie quando usurate.
13.2
EN
EN
13.2 Knives replacement
LOOK CAREFULLY AT THE ORIENTATION OF THE KNI-
VES. Replace one line at a time so that the remaining lines
may be used as a reference,
in particular the shovel knives
which must be oriented in the direction of rotation, fig.13/3.
13.3 Belt adjustment
The belts, located under the cover C fig.13/4, are kept un-
der constant tension by the spring belt tensioner D. The
adjustment of the play is automatic and does not require
any further adjustment. Replace belts when worn out.
13.2
FR
FR
13.2 Replacement des couteaux
FAIRE ATTENTION Á LA POSITION DES COUTEAUX et
les remplacer une ligne par fois pour avoir un terme de
référence,
en particulier les couteaux à lame qui doit être
orientée dans le sens de rotation, fig.13/3.
13.3 Réglage courroies
Les courroies qui se trouvent sous le couvercle C fig.13/4
sont toujours tenues en tension par le tendeur de courroie
à ressort D. La reprise du jeu est automatique et ne néces-
site aucune réglage. Remplacer les courroies lorsqu'elles
sont usées.
13.2
ES
ES
13.2 Sustitucion cuchillas
OBSERVAR BIEN LA ORIENTACION DE LAS CUCHIL-
LAS y sustituir una línea cada vez para tener un punto de
referencia,
en particular, a los cuchillos de hoja que debe
ser orientado en la dirección de rotación, fig.13/3.
13.3 Regulación correas
Las correas, alojadas bajo la tapa C fig.13/4, están man-
tenidas siempre tensas por el tensor de muelle D. La recu-
peración del juego es automática y no requiere ningún re-
gistro. Cambie las correas en caso de desgaste.
13.2
DE
DE
13.2 Messerersatz
DIE MESSERRICHTUNG GUT BEACHTEN. Ersetzen Sie
eine Zeile für die Zeit, um immer einen Bezugspunkt zu
pflegen,
insbesondere die Messer, die in der Drehrichtung
ausgerichtet sein muß, Bild 13/3.
13.3 Riemeneinstellung
Die unter der Abdeckung C Abb.13/4 angeordneten Rie-
men sind stets durch den Federriemenspanner D ge-
spannt.
Die Wiederherstellung des Spiels ist automatisch
und erfordert keine Registrierung. Riemen tauschen, wenn
getragen.
fig.13/4
fig.13/1
A
fig.13/2
A
fig.13/3
C
D
40
14. INCONVENIENTI, CAUSE E RIMEDI (BR)_P1 10-16 rev. 0
14. INCONVENIENTI CAUSE RIMEDI
La velocità di rotazione dei coltelli non sale
rapidamente
La frizione slitta o non è regolata
in modo corretto (cavo teso)
Far controllare la frizione e la regolazione
del cavo
IT
Il motore in lavoro tende a rallentare o a
spegnersi
Freno PTO dell’attrezzo non
regolato in modo corretto
IT
La zona del freno PTO dell’attrezzo si
surriscalda in modo eccessivo
Freno PTO non regolato in mo-
do corretto
Far controllare la regolazione del freno
PTO
Bulloni e dadi si allentano
Bulloni e dadi non serrati corret-
tamente
Serrare tutti i bulloni ed i dadi, in special
modo su coltelli e PTO
14. PROBLEMS CAUSES SOLUTIONS
The rotation speed of the cutting tools does
not rise quickly
The clutch is slipping or is not
set correctly (tensioned cable)
Check the clutch and cable tension
EN
When operating, the engine tends to slow
down or power off
The PTO brake on the cutting
tool is incorrectly set
EN
The PTO brake area on the cutting tool
overheats excessively
The PTO brake is incorrectly set
Check the PTO brake setting
Bolts and nuts are loosen Not well tightened
Tighten strongly all bolts and nuts, parti-
cularly on blades and PTO
14. INCONVENIENTS CAUSES SOLUTIONS
La vitesse de rotation des couteaux ne
monte pas rapidement
La friction glisse ou n’est pas ré-
glée correctement (câble tendu)
Faire contrôler la friction et le réglage du
câble
FR
Le moteur en action tend à ralentir ou à
s’éteindre
Frein PTO de l’outil n’est pas ré-
glé correctement
FR
La zone du frein PTO de l’outil se surchauf-
fe de façon excessive
Frein PTO n’est pas réglé cor-
rectement
Faire contrôler le réglage du frein PTO
Les boulons et les écrous se desserrent
Les boulons et les écrous ne
sont pas serrés correctement
Serrer tous les boulons et les écrous en
particulier sur les couteaux et la PTO
14. INCONVENIENTES CAUSAS REMEDIOS
La velocidad de rotación de las cuchillas
no aumenta con rapidez
El embrague patina o no está
regulado de forma correcta
(cable tenso)
Revisar el embrague y la regulación del
cable
ES
Durante el trabajo, el motor tiende a ir más
despacio o a apagarse
Freno PTO de la herramienta no
está regulado de forma correcta
ES
La zona del freno PTO de la herramienta
se calienta de forma excesiva
Freno PTO no está regulado de
manera correcta
Revisar la regulación del freno PTO
Los bulones y tuercas se aflojan
Los bulones y tuercas no están
bien apretados
Apretar todos los bulones y tuercas espe-
cialmente en cuchillas y PTO
14. STÖRUNGEN URSACHE ABHILFE
Die Drehgeschwindigkeit der Messer steigt
nicht schnell an
Die Kupplung schleift bzw. ist
nicht richtig eingestellt (Seil ge-
zogen)
Die Kupplung und die Einstellung des
Seilzugs überprüfen lassen
DE
Der laufende Motor neigt dazu, langsamer
zu laufen bzw. auszugehen
Zapfwellen-Bremse des Anbau-
gerätes ist nicht ordnungsge-
mäß eingestellt
DE
Der Bereich um die Zapfwellen-Bremse
wird zu heiß
Zapfwellen-Bremse nicht
ordnungsgemäß eingestellt
Einstellung der Zapfwellen-Bremse
überprüfen lassen
Bolzen und Muttern gelockert
Bolzen und Muttern nicht ord-
nungsgemäß angezogen
Alle Bolzen und Muttern anziehen, vor al-
lem an Messern und Zapfwelle
41
14. INCONVENIENTI, CAUSE E RIMEDI (BR)_P2 10-16 rev. 0
14. INCONVENIENTI CAUSE RIMEDI
La macchina, in piano, non prosegue
diritta ma tende a curvare
Pneumatico sgonfio sul lato che
curva
Gonfiare alla giusta pressione e pareggia-
re i diametri esterni degli pneumatici
IT
Rullo coltelli sbilanciato o coltelli
mancanti
Controllare i coltelli, sostituirli se usurati o
deformati, aggiungerli se mancanti
IT
Si nota un incremento delle vibrazioni du-
rante il lavoro ma anche da ferma
Rullo coltelli sbilanciato in segui-
to ad urti
Far controllare i cuscinetti del rullo porta
coltelli
L'attrezzo BladeRunner durante il lavoro si
solleva facilmente davanti
Bilanciamento non adatto o
mancante
Aggiungere i pesi di bilanciamento Blade
Runner
14. PROBLEMS CAUSES SOLUTIONS
When operating on flat terrain, the machin
e
tends to curve rather than advance straight
The tire is under-inflated on the
side on which the machine is
curving
Inflate to the correct pressure to obtain
the same external diameter on the tires
EN
Unbalanced cutting tool roller or
missing cutting tools
Check the cutting tools, and replace them
if they are worn, deformed or missing
EN
Increased vibrations both when the
machine is still and in operation
Unbalanced cutting tool roller
following a collision
Check the bearings on the cutting tool
roller
The BladeRunner tool is easily lifted at the
front during work operations
Incorrect or inexistent balancing Add the BladeRunner balancing weights
14. INCONVENIENTS CAUSES SOLUTIONS
La machine, sur surface plate, ne va pas tou
droit mais tend à tourner
Pneu dégonflé sur le côté qui
tourne
Gonfler à la juste pression et équilibrer
les diamètres externes des pneus
FR
Rouleau des couteaux déséquili-
bré ou couteaux manquants
Contrôler les couteaux, les substituer s’ils
sont usés ou déformés, les ajouter s’ils
manquent
FR
On remarque une augmentation des vibra-
tions pendant le travail mais aussi en arrêt
Rouleau des couteaux déséquili-
bré suite à des coups
Faire contrôler les coussinets du rouleau
porte couteaux
L'outil BladeRunner se soulève facilement
devant pendant le travail
Équilibrage non adapté ou man-
quant
Ajouter les poids d’équilibrage BladeRun-
ner
14. INCONVENIENTES CAUSAS REMEDIOS
La máquina, en terreno llano, no continúa
recta sino que tiende a inclinarse
Neumático desinflado en el lado
que se inclina
Inflar a la presión adecuada y equilibrar
los diámetros externos de los neumáticos
ES
Rodillo de las cuchillas desequi-
librado o falta de cuchillas
Controlar las cuchillas, sustituirlas si
están desgastadas o deformadas, añadir-
las si faltan
ES
Se advierte un aumento de las vibraciones
mientras trabaja y también mientras está
detenida
Rodillo cuchillas desequilibrado
debido a golpes
Hacer que se revisen los cojinetes del
rodillo portacuchillas
La herramienta BladeRunner se eleva
delante fácilmente durante el trabajo
Equilibrado no adecuado o
inexistente
Añadir los pesos de equilibrado
BladeRunner
14. STÖRUNGEN URSACHE ABHILFE
Auf ebener Fläche fährt das Gerät nicht
gerade sondern es fährt in Kurven
Reifendruck an der betreffenden
Seite zu niedrig
Ordnungsgemäßen Reifendruck wieder-
herstellen und sicherstellen, dass die Auß-
endurchmesser beider Reifen gleich sind
DE
Ungleichmäßige Gewichtsvertei-
lung der Messerrolle bzw. Mes-
ser fehlen
Messer prüfen und bei Verschleiß oder
Verformung auswechseln, bzw. fehlende
Messer ersetzen.
DE
Anstieg der Vibrationen während der Arbeit
aber auch bei stehendem Gerät
Ungleichmäßige Gewichtsvertei-
lung der Messerrolle infolge von
Stößen
Lager der Messerrolle überprüfen lassen
Das BladeRunner Anbaugerät hebt
während der Arbeit vorne leicht ab
Keine ordnungsgemäße
Gewichtsverteilung
Die BladeRunner-Gewichte hinzufügen
42
15. TUTELA DELL’ACQUIRENTE (BR)_P1 10-16 rev. 0
15. TUTELA DELL'ACQUIRENTE
15.1
IT
IT
15.1 Dichiarazioni di consegna / garanzia e CE
Per tutelare l’Acquirente sulla qualità del prodotto acquista-
to, all’atto della vendita vengono rilasciati una Dichiarazio-
ne di Conformità CE ed una Dichiarazione di Consegna
con Certificato di Garanzia (rilasciata dal rivenditore); que-
sti certificati sono da conservare insieme alla fattura di
acquisto o scontrino fiscale almeno nel periodo di validità
della garanzia.
La Dichiarazione di Consegna e Garanzia deve essere fir-
mata dall’Acquirente dopo essere stato informato del fun-
zionamento della macchina da parte del Rivenditore.
Il Certificato è presente sul sito del Costruttore, in area ri-
servata al Rivenditore, che provvederà a compilare e for-
nire una copia al cliente, tenendo per sé la copia firmata.
La Dichiarazione di Conformità CE garantisce l’utente fina-
le che la macchina è stata progettata e costruita al fine di
raggiungere i livelli di sicurezza previsti dalla Direttiva Mac-
chine Europea e sue modificazioni.
15. CONSUMER PROTECTION
15.1
EN
EN
15.1 Delivery declarations / warranty and EC
To protect the Consumer in terms of the quality of the pro-
duct purchased at the time of the sale, an EU Declaration
of Conformity and Declaration of Delivery are issued with a
Warranty Certificate (issued by the reseller). These certifi-
cates should be kept, as well as the invoice or receipt, for
as long as the warranty is valid at least.
The Declaration of Delivery and Warranty must be signed
by the Consumer after having the Reseller has informed
his/her about the functioning of the machine.
The Certificate is present on the premises of the Manufac-
turer, in an area reserved to the Reseller, which will fill in
and provide a copy to the customer, keeping the signed
copy for itself.
The EU Declaration of Conformity guarantees end users
that the machine has been designed and manufactured in
order to achieve the levels of safety set out by the Euro-
pean Machine Directive and its modifications.
15. PROTECTION DE L’ACHETEUR
15.1
FR
FR
15.1 Déclarations de livraison / garantie et CE
Pour protéger l’Acheteur sur la qualité du produit acheté au
moment de la vente, différents documents sont fournis tels
qu’une Déclaration de Conformité CE, un Déclaration de
Livraison avec Certificat de Garantie (remise par le reven-
deur), ces certificats doivent être conservés avec la facture
d’achat ou le ticket de caisse au moins durant la durée de
validité de la garantie.
La déclaration de Livraison et Garantie doit être signée par
l’Acheteur après avoir été informé du fonctionnement de la
machine de la part du Revendeur.
Le Certificat se trouve sur le site du Constructeur, dans
l’aire réservée au Revendeur, qui s’occupera de remplir et
procurer une copie au client, en gardant pour lui la copie
signée.
La Déclaration de Conformité CE garantit à l’Utilisateur fi-
nal que la machine a été projeté et construite pour attein-
dre les niveaux de sécurité prévus par la Directive Machi-
nes Européenne et ses modifications.
15. TUTELA DEL COMPRADOR
15.1
ES
ES
15.1 Declaraciones de entrega / garantia y CE
Como garantía de calidad del producto adquirido, en el
momento de la venta se le entregan al comprador una De-
claración de Conformidad CE, una Declaración de Entrega
con Certificado de Garantía (expedida por el vendedor),
estos certificados deben conservarse con la factura de
compra o el ticket durante, mínimo, todo el periodo de vali-
dez de la garantía.
La Declaración de Entrega y Garantía debe firmarla el
comprador después de que el vendedor le haya informado
del funcionamiento de la máquina.
El Certificado se encuentra en la página web del fabrican-
te, en área reservada para el vendedor, que cumplimenta-
rá y entregará una copia al cliente, conservando una copia
para él.
La Declaración de Conformidad CE le garantiza al usuario
final que la máquina se ha proyectado y fabricado para al-
canzar los niveles de seguridad que prevé la Directiva Má-
quinas Europea y sus modificaciones.
15. KÄUFERSCHUTZ
15.1
DE
DE
15.1 Lieferungs- / Garantieerklärung und CE-Deklaration
Zum Schutz des Käufers erhält dieser beim Kauf über die
Produktqualität CE-Konformitätserklärung und Lieferbe-
scheinigung mit Garantieschein (vom Vertragshändler aus-
gestellt). Diese Bescheinigungen müssen mit der Rech-
nung bzw. mit dem Kassenbon zumindest während der
Garantielaufzeit aufbewahrt werden.
Die Lieferbescheinigung mit Garantieschein muss vom
Käufer unterzeichnet werden, nachdem dieser vom Ver-
tragshändler über den Betrieb des Gerätes informiert wur-
de.
Die Bescheinigung ist auf der Webseite des Herstellers im
Login-Bereich der Vertragspartner aufrufbar; der Vertrags-
händler füllt das Formular aus, händigt dem Kunden eine
Kopie aus, und legt die vom Kunden unterzeichnete Be-
scheinigung zu seinen Akten.
Die CE-Konformitätserklärung bestätigt dem Kunden, dass
das Gerät mit dem Ziel entwickelt und gebaut wurde, das
von der europäischen Maschinenrichtlinie und späteren
Änderungen vorgesehene Maß an Sicherheit zu erfüllen.
44
16. ASSISTENZA (BR)_P1 10-16 rev. 0 / 17. ATTREZZI ED ACCESSORI APPLICABILI (BR)_P1 10-16 rev. 0
16. ASSISTENZA
17. ATTREZZI ED ACCESSORI APPLICABILI
IT
IT
Il Servizio Assistenza del Costruttore è sempre a disposi-
zione per qualsiasi necessità di uso e/o di riparazione della
macchina. Questo manuale fornisce le indicazioni per l’uso
e la manutenzione ordinaria.
Per una corretta gestione della macchina attenersi al Pro-
gramma di manutenzione del costruttore che a scadenze
programmate vi invita obbligatoriamente (almeno nel perio-
do di garanzia, pena il decadimento) a far controllare la
macchina ed a fare la manutenzione straordinaria presso
un Centro Assistenza autorizzato.
In accordo con le Direttive Europee vigenti, è vie-
tato applicare attrezzi e/o accessori per il trasporto
dell'operatore o di altre persone.
Tutte le attrezzature originali sono costruite in accordo
alla Direttiva Macchine Europea vigente.
16. ASSISTANCE
17. APPLICABLE ACCESSORIES AND EQUIPMENTS
EN
EN
The Assistance Service of the Manufacturer is always avai-
lable for any needs pertaining to the use and/or repair of
the machine. This manual provides instructions for the rou-
tine maintenance and use.
For the correct management of the machine, comply with
the manufacturer's Maintenance Plan, which, at planned
intervals, obligatorily requests (during the warranty period
at least, upon penalty of its expiry, that the machine is
checked and that supplementary maintenance is carried
out at an authorized Help Centre.
In accordance with current European Directives,
it's forbidden to attach implements and/or accessories
for transporting the operator or other people.
All original equipments are manufactured in accordan-
ce with the European Machine Directive in force.
16. ASSISTANCE 17. OUTILS ET ACCESSOIRES A AJOUTER
FR
FR
Le Service Assistance du Constructeur est toujours à di-
sposition pour toute nécessité d’utilisation et/ou de répara-
tion de la machine. Ce manuel fournit les indications pour
l’utilisation et l’entretien ordinaire.
Pour une bonne gestion de la machine se conformer au
Programme d’entretien du constructeur qui à l’échéance
programmée vous invite obligatoirement (au moins durant
la durée de garantie sous peine d’annulation) à faire con-
trôler la machine et à faire l’entretien extraordinaire auprès
d’un Centre d’Assistance autorisé.
Selon les Directives Européenne en vigueur, n'est
pas possible d'attacher outils et/ou accessoires pour
le transporte de l'opérateur ou d'autre personnes.
Tous les équipements originaux sont construits en ac-
cord avec la Directive Machines européennes en vi-
gueur.
16. ASISTENCIA 17. APEROS Y ACCESORIOS APLICABLES
ES
ES
El Servicio Asistencia del Fabricante está siempre a dispo-
sición para cualquier necesidad de uso y/o reparación de
la máquina. Este manual proporciona indicaciones para el
uso y mantenimiento ordinario.
Para una correcta gestión de la máquina atenerse al Pro-
grama de mantenimiento del fabricante que, con unos pla-
zos programados, indica que (por lo menos durante el pe-
riodo de garantía, so pena de su anulación) es obligatorio
controlar la máquina y hacer el mantenimiento extraordina-
rio en un Centro de Asistencia autorizado.
Con arreglo à la Directiva Europea, no es posible
aplicar aperos y/o accesorios para el transporto del
operador o de otras personas.
Todos los equipos originales están construidos según
la Directiva Máquinas Europea vigente.
16. KUNDENDIENST
17. ANWENDBARE GERÄTE UND ZUBEHÖR
DE
DE
Der Kundendienst des Herstellers steht Ihnen bei Fragen
bezüglich Gebrauch und/oder Instandsetzung des Gerätes
stets gerne zur Verfügung. Die vorliegende Bedienungsan-
leitung gibt Ihnen Hinweise zum Gebrauch und zur regel-
mäßigen Wartung.
Zur Gewährleistung einer ordnungsgemäßen Instandhal-
tung des Gerätes ist das vom Hersteller vorgegebene War-
tungsprogramm einzuhalten; dieses verpflichtet den Käufer
(zumindest innerhalb der Garantielaufzeit, bei sonstigem
Garantieverlust) dazu, das Gerät in der Werkstatt eines
Vertragspartners überholen und außergewöhnliche War-
tungsarbeiten ausschließlich dort durchführen zu lassen.
Der Europäische Richtlinie gemäß, kann kein Mö-
gliche und/oder Arbeitsgeräte für Transport die Opera-
tor und Personen angëhangt werden.
Alle Originalgeräte wurden nach der geltenden Euro-
päischen Maschinenrichtlinie gebaut.
45
17. ATTREZZI ED ACCESSORI APPLICABILI (BR)_P2 10-16 rev. 0
17.1
IT
IT
17.1 Bilanciamento macchina (fig.17/1) - Per lavorare bene occorre
avere un buon bilanciamento tra macchina e attrezzo, allo scopo si pos-
sono utilizzare delle zavorre (fig.17/1) del peso complessivo di 14 kg op-
pure la prolunga PTO cm 8 (fig.17/2).
17.2 Rullo posteriore per BladeRunner (fig.17/3) - Utile per lavorare
sotto ai cespugli escludendo l’ingombro delle ruotine.
17.3 Kit coltelli diritti A (fig.17/4) - Interposti ai coltelli a Y, per distrug-
gere e sminuzzare l’erba in modo più efficace.
17.4 Kit coltelli a pala (fig.17/5) - Montati in sostituzione dei coltelli a Y,
per un taglio più netto per evitare lo sfilacciamento degli steli d’erba e ri-
durre l’in
g
iallimento delle
p
unte.
17.1
EN
EN
17.1 Balancing machine (fig.17/1) - A correct balance between the ma-
chine and tool is essential for proper operation; ballasts can be used for
this purpose (fig.17/1) for an overall weight of 14 kg, or a PTO extension
of 8 cm (fig.17/2).
17.2 BladeRunner rear roller (fig.17/3) - Use for operation underneath
shrubs, excluding the clearance of the small wheels.
17.3 Straight cutting tool kit A (fig.17/4) - Inserted on the Y cutting
tools, to destroy and mulch hay more efficiently.
17.4 Shovel cutting tool kit (fig.17/5) - Assembled as an alternative to
the Y cutting tools, for a cleaner cut and to prevent the fraying of the
stems of ha
y
and reduce the
y
ellowin
g
of the ti
p
s.
17.1
FR
FR
17.1 Équilibrage de la machine (fig.17/1) - Pour bien travailler, il faut
avoir un bon équilibrage entre machine et outil, pour cela on peut utiliser
des lests (fig.17/1) pour un poids total de 14 kg, ou bien la rallonge PTO
cm 8 (fig.17/2).
17.2 Rouleau postérieur pour BladeRunner (fig.17/3) - Utile pour tra-
vailler sous les buissons en excluant l’encombrement des petites roues.
17.3 Kit couteaux droits A (fig.17/4) - Interposés aux couteaux à Y,
pour détruire et émietter l’herbe de façon plus efficace.
17.4 Kit couteaux à pelle (fig.17/5) - Montés en substitution des cou-
teaux à Y pour une coupe plus nette pour éviter l’effilochement des tiges
d’herbe et réduire le
j
aunissement des
p
ointes.
17.1
ES
ES
17.1 Equilibrado máquina (fig.17/1) - Para trabajar bien hay que tener
un buen equilibrio entre máquina y herramienta. Para ello pueden utili-
zarse lastres (fig.17/1) de un peso total de 14 kg, o bien, el alargador
PTO de 8 cm (fig.17/2).
17.2 Rodillo posterior para BladeRunner (fig.17/3) - Útil para trabajar
bajo los matorrales excluyendo el espacio ocupado por las ruedas.
17.3 Kit cuchillas rectas A (fig.17/4) - Situadas entre las cuchillas en
Y, para destrozar y desmenuzar la hierba de manera más eficaz.
17.4 Kit cuchillas de pala (fig.17/5) - Montadas para sustituir las cu-
chillas en Y, proporcionan un corte más preciso lo que evita el deshila-
chado de los tallos de hierba
y
reduce el amarilleo de las
p
untas.
17.1
DE
DE
17.1 Ordnungsgemäße Gewichtsverteilung des Gerätes (Abb.17/1) -
Um einen richtigen Gerätebetrieb sicherstellen zu können, muss das Ge-
wicht zwischen dem Einachstraktor und dem Anbaugerät ordnungsgemäß
verteilt sein; hierzu können Zusatzgewichte (Abb.17/1) von insgesamt 14 kg
bzw. die Zapfwellenverlängerung von 8cm (Abb.17/2) verwendet werden.
17.2 Hinterrolle für BladeRunner (Abb.17/3) - Diese wird zur Bearbeitung
unter Büschen verwendet, nachdem die kleinen Räder entfernt wurden.
17.3 Satz gerader Messer A (Abb.17/4) - Zwischen den Y-förmigen Mes-
sern, um das Gras effektiver zu zerkleinern.
17.4 Satz Schaufelmesser (Abb.17/5) - Ist anstelle der Y-förmigen Mes-
sern angebracht; diese gewährleisten einen reinen Schnitt, um zu vermei-
den, dass die Grasstängel ausfransen bzw. um das Verwelken der Spitzen
zu reduzieren.
.fig.17/3.
.fig.17/1.
.fig.17
/
2
.fig.17/4
.A
.fig.17/5
46
18. GARANZIA (BR)_P1 10-16 rev. 0 / 19. MATERIALE DI CONSUMO (BR)_P1 10-16 rev. 0
18. GARANZIA
19. MATERIALE DI CONSUMO
IT
IT
La garanzia è in accordo alle normative comunitarie vigen-
ti, fornita nei modi e nei limiti indicati dal Costruttore. Per i
paesi extra europei vale il periodo di garanzia dei singoli
paesi sempre con modalità e limiti indicati dal Costruttore.
IMPORTANTE! La garanzia non è riconosciuta per
: trascu-
ratezza della macchina, mancata manutenzione, uso di ri-
cambi non originali, uso della macchina per qualsiasi sco-
po o lavoro diversi da quanto riportato su questo manuale,
manomissione di qualsiasi componente della macchina, e
se riparata da personale non addestrato.
Il materiale di consumo è materiale considerato di normale
usura per l’uso specifico della macchina, normalmente
questo materiale non è soggetto a sostituzione in garanzia
salvo in caso di accertati difetti di produzione chiaramente
identificabili.
I materiali di consumo sono: lame, cinghie, filtri aria mo-
tore, filtri olio motore e trasmissione idraulica, cavi, fusibili
impianto elettrico, pneumatici, batterie, oli vari, forche, ti-
ranti, slitte, lampadine, oli lubrificanti, carburante.
18. WARRANTY 19. CONSUMABLES
EN
EN
The warranty is in accordance with the EU legislation in
force, provided in the ways and within the limitations indi-
cated by the Manufacturer. For non-EU countries, the war-
ranty period of the individual countries applies, also accor-
ding to the means and limitations indicated by the Manu-
facturer.
IMPORTANT! The warranty doesn't apply to:
carelessness
of the machine, lack of maintenance, repaired with use of
no original parts, use of the machine for any purpose or
work not included in this manual, tampering of any part of
the machine, and if repaired by untrained personnel.
Consumables are the material regarded as experiencing
normal wear for the specific use of the machine. Usually
this material is not subject to replacement during the war-
ranty, apart from in the case of certified factory faults that
are clearly identifiable.
The consumables are: blades, belts, engine air filters, en-
gine oil filters and hydraulic transmission, cables, fuses,
wi-ring, tires, batteries, several oils, forks, rods, sleds, light
bulbs, lubricants, fuel.
18. GARANTIE
19. MATERIEL DE CONSOMMATION
FR
FR
La garantie est en accord avec les normes communautai-
res en vigueur, fournie de la manière et dans les limites in-
diquées par le Constructeur. Pour les pays en dehors de
l'Europe, la période de garantie de chaque pays est vala-
ble toujours selon les modalités et les limites spécifiées par
le Constructeur.
IMPORTANT! La garantie ne s’applique pas en cas de
:
négligence de la machine, absence d’entretien, utilisation
de pièces de rechange non originales, utilisation de la ma-
chine dans un but ou pour un travail différent que celui pré-
vu par ce manuel, falsification de tout élément de la ma-
chine, et si réparée par du personnel non qualifié.
Le matériel de consommation est un matériel considéré
d’usure normale pour l’utilisation spécifique de la machine,
normalement ce matériel n’est pas sujet à des remplace-
ment sous garantie sauf dans des cas de défauts établis
de production clairement identifiables.
Les matériaux de consommation sont: lames, courroies, fil-
tres à air moteur, filtres à huiles moteur et transmission
hydraulique, câbles, fusibles installation électrique, pneus,
batteries, huiles diverses, fourches, tirants, patins, ampou-
les, huiles lubrifiantes, carburant.
18. GARANTÍA
19. MATERIAL DE CONSUMO
ES
ES
La garantía cumple las normativas comunitarias vigentes,
dada en los modos y en los límites indicados por el Fabri-
cante. Para los países extraeuropeos es válido el periodo
de garantía de cada país, siempre con las modalidades y
límites indicados por el Fabricante.
¡IMPORTANTE! La garantía quedará anulada en caso de:
no cuidar adecuadamente la máquina, no realizar el man-
tenimiento indicado, usar recambios que no sean origina-
les, usar la máquina para cualquier fin o trabajo diferente a
lo establecido en este manual, manipular cualquier compo-
nente de la máquina, y en caso de que personal sin forma-
ción reparara la máquina.
El material de consumo es un material que se considera
de desgaste normal para el uso específico de la máquina,
normalmente este material no está sujeto a cambios en
garantía excepto en caso de defectos de fábrica compro-
bados y claramente identificables.
Los materiales de consumo son: cuchillas, correas, filtro
aire motor, filtros aceite motor y transmisión hidráulica, ca-
bles, fusibles dispositivo eléctrico, neumáticos, baterías,
aceites varios, horquillas, tirantes, guías de deslizamiento,
bombillas, aceites lubricantes y carburante.
18. GARANTIE
19. VERSCHLEISSMATERIAL
DE
DE
Die Garantie entspricht den geltenden Vorgaben der Euro-
päischen Gemeinschaft und wird in dem vom Hersteller vor-
gegebenen Rahmen geleistet. Bei außereuropäischen Staa-
ten gilt die jeweils bestehende Garantielaufzeit des entspre-
chenden Landes ebenfalls in dem vom Hersteller vorgege-
benen Rahmen.
WICHTIG! Es wird keine Garantieleistung entgegengebracht
bei: Vernachlässigung des Gerätes, fehlender Wartung, Ver-
wendung von Nichtoriginalersatzteilen,Verwendung des Ge-
rätes für Zwecke oder Arbeiten die nicht den Angaben in der
Betriebsanleitung entsprechen, unbefugten Eingriffe an be-
liebigen Gerätebauteilen bzw. Instandsetzung durch nicht fa-
chlich geschultes Personal.
Als Verschleißmaterial gilt solches Material, das aufgrund
des spezifischen Gerätegebrauchs einem normalen Ver-
schleiss unterliegt. Normalerweise wird dieses Material
nicht auf Garantie ersetzt, außer in Fällen, wo es sich um
eindeutig erkennbare Fabrikationsfehler handelt.
Als Verschleißmaterial gelten: Messer, Riemen, Motor-Luft-
filter, Ölfilter Motor und hydraulisches Getriebe, Kabel, Si-
cherungen der elektrischen Anlage, Reifen, Batterien, ver-
schiedene Öle, Gabeln, Zugseile, Gleitteller, Lämpchen,
Schmieröle, Kraftstoff.
47
20. RICAMBI, COME ORDINARE (BR)_P1 10-16 rev. 0
20. RICAMBI, COME ORDINARE
IT
IT
Si raccomanda di impiegare esclusivamente ricambi origi-
nali che offrono sempre le massime caratteristiche di sicu-
rezza e intercambiabilità.
Ogni richiesta deve essere corredata del numero di matri-
cola della macchina e del numero di codice del pezzo da
sostituire.
Si consiglia di indicare sempre il numero di matricola della
macchina e il codice del pezzo da sostituire e di rivolgersi
ai Centri vendita o assistenza autorizzati.
Il Costruttore è a disposizione per qualsiasi chiarimento si
renda necessario.
Tutti gli ordini dei particolari di ricambio devono essere
inoltrati tramite Rivenditore, il Costruttore non può spedire
nulla al dettaglio.
20. SPARE PARTS, HOW TO ORDER
EN
EN
It is recommended that only original spare parts are used,
which always offer the maximum safety properties and are
interchangeable.
Every request must be provided with the machine serial
number and the code number of the part to be replaced.
It is recommended that the machine serial number and the
code number of the part to be replaced are always indi-
cated and that you contact an authorized Help or Sales
Centre.
The Manufacturer is available for any further explanations
that may be needed.
All spare part orders must be sent via the Reseller. The
Manufacturer cannot send anything by retail.
20. PIECES DE RECHANGE, COMMENT COMMANDER
FR
FR
On recommande d’utiliser exclusivement des pièces de re-
change originales qui offrent toujours les caractéristiques
maximales de sécurité et d’interchangeabilité.
Chaque demande doit être accompagnée du numéro d’im-
matriculation de la machine et du numéro de code de la
pièce à remplacer.
On conseille de toujours indiquer le numéro de série et le
code de la pièce à remplacer et de s’adresser aux Centres
de vente ou assistance autorisés.
Le Constructeur est à disposition pour tout éclaircissement
nécessaire. Toutes les commandes des pièces de rechan-
ge particulières doivent être envoyées via le Revendeur, le
Constructeur ne peut rien envoyer en tant que vente au
détail.
20. RECAMBIOS, CÓMO PEDIR
ES
ES
Se recomienda emplear exclusivamente recambios origi-
nales que ofrezcan siempre las máximas características
de seguridad y intercambiabilidad.
Toda solicitud debe ir acompañada del número de matrícu-
la de máquina y del número de código de la pieza que ha-
ya que sustituir.
Se aconseja indicar siempre el número de matrícula y el
código de la pieza que haya que sustituir y también les
aconsejamos que se dirijan a los centros de venta o asi-
stencia autorizados.
El fabricante está a disposición para cualquier aclaración
que sea necesaria.
Todos los pedidos de las piezas de recambio deben pasar
a través del vendedor, el fabricante no puede suministrar
nada al por menor.
20. ERSATZTEILE, BESTELLUNG
DE
DE
Es sollten ausschließlich Originalersatzteile verwendet
werden, da diese stets höchste Sicherheitsmerkmale und
Austauschbarkeit bieten.
Bei einer Anfrage sind die Gerätenummer und die Bestell-
nummer des auszuwechselnden Teils anzugeben.
Wir empfehlen stets die Gerätenummer und die Bestell-
nummer des auszuwechselnden Teils anzugebenen und
sich immer an einen Vertragspartner zu wenden.
Der Hersteller steht bei Rückfragen gerne zur Verfügung.
Alle Ersatzteilaufträge müssen dem Hersteller durch einen
Vertragspartner zugestellt werden, der Hersteller kann kei-
ne Teile direkt an den Endkunden versenden.
1/45