HoMedics Well at Walgreens Automatic Wrist Blood Pressure Monitor Instrucciones de operación

Marca: HoMedics

Modelo: Well at Walgreens Automatic Wrist Blood Pressure Monitor

Categoría: Unidades de presión arterial

Tipo: Instrucciones de operación

Este manual también es adecuado para

WGNBPW-710

AUTOMATIC WRIST

Blood Pressure

Monitor

• 5-Year

Limited

Warranty

WGNBPW-710

El manual en español

empieza en la página 32

TABLE OF CONTENTS

INTRODUCTORY INFORMATION:

Important Product Notices and

Safety Instructions .......................................... 3

About Blood Pressure ..................................... 5

Blood Pressure Standard ................................ 5

How This Blood Pressure

Monitor Works .................................................. 7

USAGE INFORMATION:

Name/Function of Each Part ........................... 8

Display Explanations ....................................... 9

Installing Batteries ........................................ 11

Date & Time Set Procedure ........................... 13

Applying the Cuff ........................................... 14

Correct Measurement Posture ..................... 15

Measurement Procedure ............................... 16

Risk Category Index ...................................... 19

Irregular Heartbeat Detector (IHB) .............. 20

Recalling Values from Memory ..................... 21

Clearing Values from Memory ...................... 21

Important Notes Regarding Your

Blood Pressure Measurement ...................... 22

Care, Maintenance & Cleaning ..................... 23

Potential for Electromagnetic

Interference .................................................... 25

Troubleshooting ............................................. 26

Specifications ................................................ 27

5 Year Limited Warranty ................................ 29

IMPORTANT PRODUCT NOTICES AND

SAFETY INSTRUCTIONS

When using your blood pressure monitor, basic

precautions should always be followed. Please

read and follow all instructions and warnings before

using this product. Save these instructions for future

reference.

• Pleasenotethatthisisahomehealthcareproduct

only and it is not intended to serve as a substitute for

the advice of a physician or medical professional.

• Thisdeviceusestheoscillometricmethodto

measure systolic and diastolic blood pressure, as

well as heart rate.

• Do not use this device for diagnosis or treatment

of any health problem or disease. Measurement

results are for reference only. Consult a healthcare

professional for interpretation of blood pressure

measurements. Contact your physician if you have

or suspect any medical problem. Do not change

your medications without the advice of your

physician or healthcare professional.

• Thisproductisnotsuitableforpeoplewith

arrhythmias. This device may have difficulty

determining the proper blood pressure for pregnant

women, individuals with irregular heartbeat,

diabetes, poor circulation of blood, kidney problems

or for users who have suffered from a stroke.

• Consultyourphysicianbeforemeasuringblood

pressure at the wrist if you have any of the following

conditions: Severe hypertension, severe diabetes,

severe arteriosclerosis, severe kidney disease or

vascular disease that may compromise circulation.

• Thepulsedisplayisnotsuitableforcheckingthe

frequency of heart pacemakers.

• Electromagneticinterference:Thedevicecontains

sensitive electronic components. Avoid strong

electrical or electromagnetic fields in the direct vicinity

of the device (e.g. mobile telephones, microwave

ovens). These may lead to temporary impairment of

measurement accuracy.

• Usebloodpressuremonitoronlyforits

intended use.

• Do not wrap the cuff around body parts other than

your wrist.

• Notforusebyoronpersonsunderthe

age of 18.

• Useonly1.5VAAAalkalinebatteriesfor

power supply.

Blood pressure measurements determined with this

device are equivalent to those obtained by a trained

observer using the cuff/stethoscope auscultatory

method, within the limits prescribed by the American

National Standard, Manual, electronic, or automated

sphygmomanometers.

ABOUT BLOOD PRESSURE

What is Blood Pressure?

Blood pressure is the pressure exerted on the artery

walls while blood flows through the arteries. The

pressure measured when the heart contracts and

sends blood out of the heart is systolic (highest) blood

pressure. The pressure measured when the heart

dilates with blood flowing back into the heart is called

diastolic (lowest) blood pressure.

Why Measure Your Blood Pressure?

Among today’s various health problems, those associated

with high blood pressure are very common. High blood

pressure dangerously correlates with cardiovascular

diseases. Therefore, blood pressure monitoring is

important for identifying those at risk.

BLOOD PRESSURE STANDARD

The table on page 6 contains defined levels for hypertension

that are publicly available from the National Heart Lung and

Blood Institute at the U.S. National Institutes of Health (NIH)

(http://www.nhlbi.nih.gov/health/dci/Diseases/Hbp/HBP_

WhatIs.html). Users can compare their own blood pressure

readings against these defined levels to determine if they

may be potentially at increased risk.

This table is applicable to most adults aged 18 and older.

Blood pressure tends to go up and down, even in people who

normally don’t have high readings. If your numbers stay above

the “normal” range most of the time, you may be at increased

risk and should consult your physician.

Although one can easily find where their own blood pressure

readings fall on this table, this monitor comes equipped with

a Risk Category Index that automatically compares each

reading to the defined levels and provides a helpful cue if

your reading falls into one of the stages that could potentially

indicate increased risk. See page 19 for more information on

this feature.

Please note that cues provided by this monitor are only

intended to assist you in using this table. The table and cues

are only provided for convenience to help you understand

your non-invasive blood pressure reading as it relates to

the NIH information. They are not a substitute for a medical

examination by your physician. It is important for you to

consult with your physician regularly. Your physician will tell

you your normal blood pressure range as well as the point at

which you may actually be considered to be at risk.

Category Systolic (mmHg) Diastolic (mmHg)

Normal Less than 120 and Less than 80

Prehypertension 120-139 or 80-89

High Blood Pressure

Stage 1 140-159 or 90-99

Stage 2 160 or higher or 100 or higher

HOW THIS BLOOD PRESSURE

MONITOR WORKS

This monitor uses innovative technology to detect your

blood pressure. This technology enables the monitor

to automatically inflate and deflate at the appropriate

level for each individual. With one touch of a button,

the cuff will automatically inflate to block the blood flow

through your artery. Next, the deflation process starts.

Please note that any muscle movement during inflation

or deflation will cause measurement error. When

measurement is complete, the monitor will display

your systolic pressure, diastolic pressure, and pulse

readings.

The monitor automatically finds where your measurement

results fall on the NIH’s National Heart Lung and Blood

Institute’s table and provides a cue if your reading falls into

one of the stages that could potentially indicate increased

risk. See page 19 for more information on this feature.

The appearance of the icon indicates that a pulse

irregularity consistent with an irregular heartbeat was

detected during measurement. Refer to page 20 for more

information on the Irregular Heartbeat Detector.

HOW THIS BLOOD PRESSURE

MONITOR WORKS

This monitor uses innovative technology to detect your

blood pressure. This technology enables the monitor

to automatically inflate and deflate at the appropriate

level for each individual. With one touch of a button,

the cuff will automatically inflate to block the blood flow

through your artery. Next, the deflation process starts.

Please note that any muscle movement during inflation

or deflation will cause measurement error. When

measurement is complete, the monitor will display

your systolic pressure, diastolic pressure, and pulse

readings.

The monitor automatically finds where your measurement

results fall on the NIH’s National Heart Lung and Blood

Institute’s table and provides a cue if your reading falls into

one of the stages that could potentially indicate increased

risk. See page 19 for more information on this feature.

The appearance of the icon indicates that a pulse

irregularity consistent with an irregular heartbeat was

detected during measurement. Refer to page 20 for more

information on the Irregular Heartbeat Detector.

NAME/FUNCTION OF EACH PART

Accessories for unit :

2“AAA”size,1.5Valkaline

batteries included with the

unit.

Memory Recall

Button

Wrist Cuff

Battery Cover

START/STOP

Button

Date/Time

Set Buttons

LCD Display

DISPLAY EXPLANATIONS

Systolic

Pressure

Diastolic

Pressure

Date/Time Indicator

Heart Rate

Display Symbols:

Heart Rate

Weak Battery Symbol: Appears when batteries

should be replaced.

Pulse Symbol: Shows the heart rate per minute.

Irregular Heartbeat Detector: See page 20 for

more information.

Risk Category Index: See page 19 for more

information.

Measurement Error: Wrap the cuff correctly and

keep wrist steady during measurement. Measure

again.

Air Circuit Abnormality: Measure again.

Pressure Exceeding 300 mmHg: Switch the unit

off to clear, then measure again.

Error Determining Measurement Data: Measure

again.

System Error: Measure again.

If and any of the following letters and numbers

appear in the area that systolic pressure should be

displayed, an error has occurred with your reading.

See Troubleshooting section of this manual for more

information.

(No Symbol)

INSTALLING BATTERIES

1. The battery cover is located along the

side of the monitor. Remove battery

cover by pressing down and pulling

away from the monitor.

2. Install batteries according to the

polarity indications inside the

compartment (as shown in figure

2). Battery Type: 2 Alkaline LR03

(AAA) size

3. Insert the other battery, according

to the polarity indications inside the

compartment (as shown in figure 3).

4. Replace the cover by inserting it

back into place.

Replace the batteries if:

•Theweakbatterysymbolappearsonthedisplay.

•

Nothing



appears



the



display



when



the



power



switched on.

As the supplied batteries are for test only

, they may be

discharged earlier than batteries you buy in stores. Replace

all batteries at one time (as simultaneous set). Use only

1.5VAAAalkalinebatteries.Removebatterieswhentheunit

is not in use for extended periods of time. Date and time

will need to be reset if batteries are removed or replaced.

Clean contacts on battery and in battery compartment with

a soft dry cloth each time you install batteries.

Note:

Batteries are hazardous waste. Do not dispose of them

together with the household garbage.

INSTALLING BATTERIES

1. The battery cover is located along the

side of the monitor. Remove battery

cover by pressing down and pulling

away from the monitor.

2. Install batteries according to the

polarity indications inside the

compartment (as shown in figure

2). Battery Type: 2 Alkaline LR03

(AAA) size

3. Insert the other battery, according

to the polarity indications inside the

compartment (as shown in figure 3).

4. Replace the cover by inserting it

back into place.

DATE & TIME SET PROCEDURE

1. To adjust the date and time, press the Date/Time Set

button

located on the top of the monitor.

2. The display will show a blinking number showing the

HOUR. Change the HOUR by pressing the

button.

Each press will increase the number by one in a cycling

manner. Press the Date/Time Set button

again to

confirm the entry, and the screen will show a blinking

number representing the MINUTE.

3. Change the MINUTE, MONTH, DAY and YEAR as

described in Step 2 above, using the

button to

change the numbers and the Date/Time Set button

to confirm the entries.

Press the button

blinking HOUR

increasing HOUR

confirm the entry

repeat process to set MINUTE,

MONTH, DAY and YEAR

APPLYING THE CUFF

1. Remove all watches, wrist jewelry, etc.

prior to attaching the wrist monitor.

Clothing sleeves should be rolled up

and the cuff should be wrapped around

bare skin for correct measurements.

2. Apply cuff to left wrist with palm facing

up as shown in Fig. A.

3. Make sure the edge of the cuff is about

1/4”~1/2” (1 cm) from the palm as

shown in Fig. B.

4. In order to ensure accurate

measurements, fasten the hook and

loop strap securely around your

wrist so there is no extra space

between the cuff and the wrist. If the

cuff is not wrapped tight enough,

the measurement values will not be

accurate.

5.Ifyourphysicianhasdiagnosedyou

with poor circulation in your left arm,

place the cuff around your right wrist as

shown in Fig. C.

Note:

If it is not possible to use the cuff on your

left wrist, it can also be used on your right

wrist. However, all measurements should

be made using the same wrist.

Fig. A

Fig. B

Fig. C

CORRECT MEASUREMENT POSTURE

1. Place your elbow on a table

so that the cuff is at the same

level as your heart as shown in

Fig. A. Relax your entire body,

especially between your elbow

and fingers.

Note: Your heart is located

slightly below your armpit.

2. If the cuff is not at the same

level as your heart or if

you cannot keep your arm

completely still throughout the

reading, use a soft object such

as a folded towel to support

your arm as shown in Fig. B.

3. Turn your palm upwards.

4. Sit upright in a chair, and take

5-6deepbreaths.

Avoid leaning back while the

measurement is being taken as

shown in Fig. C.

Fig. A

Fig. B

Fig. C

(X)

MEASUREMENT PROCEDURE

Important Notes:

•Positionthemonitoratthesamelevelasyourheart

during measurement to ensure accurate readings.

•Bloodpressurechangeswitheveryheartbeatandisin

constant fluctuation throughout the day.

•Bloodpressuremeasurementcanbeaffectedbythe

position of the user, his or her physiologic condition

and other factors. For greatest accuracy, wait 1 hour

after exercising, bathing, eating, drinking beverages

with alcohol or caffeine, or smoking to measure blood

pressure.

•Beforeameasurement,itissuggestedthatyousit

quietlyfor15minutesasmeasurementstakenduring

a relaxed state will have greater accuracy. You should

not be physically tired or exhausted while taking a

measurement.

•Duringthemeasurement,donottalkormoveyour

arm or hand muscles.

•Seepage22foradditionalnotesregardingyour

blood pressure measurement.

If you are using this blood pressure monitor for the first

time, please remove the protective film from the screen.

1. With the cuff wrapped around your wrist, press the

START/STOP button. Do not inflate the cuff unless

it is wrapped around your wrist. All digits will light

up, checking the display functions. The checking

procedure will be completed after about 3 seconds.

2. After all symbols disappear, the display will show “00”.

The monitor is “Ready to Measure” and will

automatically inflate the cuff to begin measurement.

The cuff will then begin deflating as measurement

continues.

Note:

The monitor will re-inflate automatically if the system

detects that your body requires more pressure for

measurement.

3. When the measurement is completed, the cuff

will deflate entirely and systolic pressure, diastolic

pressure and pulse will be shown simultaneously

on the LCD screen. The measurement is then

automatically stored into memory.

Note:

•Thismonitorautomaticallyturnsoffapproximately1

minute after last operation. You may also press the

START/STOP button to turn the unit off.

•Tointerruptthemeasurement,youmaypress

the START/STOP button (recommended), the

MEMORY button or Date/Time Set ( ) buttons.

The cuff will deflate immediately after a button is

pressed.

RISK CATEGORY INDEX

This monitor comes equipped with a Risk Category

Index that automatically compares each reading

to defined levels established by the U.S. National

Institutes of Health’s (NIH) National Heart Lung and

Blood Institute as described earlier in this manual,

and provides a helpful cue if your reading falls into

one of the stages that could potentially indicate

increased risk. No cue is given if the reading falls in

the normal range as defined by NIH. Please note that

cues provided by this monitor are only intended to

assist you in using this table. The table and cues are

only provided for convenience to help you understand

your non-invasive blood pressure reading as it relates

to the NIH information. They are not a substitute for a

medical examination by your physician. It is important

for you to consult with your physician regularly. Your

physician will tell you your normal blood pressure

range as well as the point at which you may actually

be considered to be at risk.

(No Symbol)

IRREGULAR HEARTBEAT DETECTOR (IHB)

The appearance of the

icon indicates that a pulse

irregularity consistent with

an irregular heartbeat was

detected during measurement.

Usually this is not a cause

for concern. However, if the

symbol appears often, we

recommend you seek medical

advice. Please note that the device does not replace a

cardiac examination, but serves to detect pulse irregularities

at an early stage.

Movement, shaking or talking during the measurement can

result in pulse irregularities that may cause the appearance of

this icon. Therefore, it is of great importance to not move or

talk during measurement.

To determine the presence of an irregular heartbeat, the

average of the heartbeat intervals is calculated with the first

3 normal effective heartbeat values. It is important to note

that the average is not a strict mathematical averaging of

allrecordedintervals.Atleast3beatswith25%orgreater

difference from the average heartbeat interval will generate

the

icon on the screen.

IMPORTANT INFORMATION:

This blood pressure monitor is not designed for use by

people with arrhythmias nor for diagnosing or treating an

arrhythmia problem. As a safeguard, we recommend that if

you have arrhythmias such as atrial or ventricular premature

beats and atrial fibrillation or any other special conditions you

should check with your physician before using your blood

pressure monitor.

Irregular

Heartbeat

Detector

RECALLINGVALUESFROMMEMORY

1. Press the MEMORY button to access the memory.

2. Every new press of the MEMORY button will recall

a previous reading. The latest reading will be

recalled first.

CLEARINGVALUESFROMMEMORY

Press and hold the and + buttons at the same

time while in memory recall mode and the data will be

erased automatically.

RECALLINGVALUESFROMMEMORY

1. Press the MEMORY button to access the memory.

2. Every new press of the MEMORY button will recall

a previous reading. The latest reading will be

recalled first.

CLEARINGVALUESFROMMEMORY

Press and hold the and + buttons at the same

time while in memory recall mode and the data will be

erased automatically.

IMPORTANT NOTES REGARDING YOUR

BLOOD PRESSURE MEASUREMENT

•Takeyourreadinginacomfortableenvironmentas

measurements can be affected by hot or cold temperatures.

Take your blood pressure at normal body temperature.

• Do not move or talk during measurement as this can elevate

readings.

• Do not move or cross legs during measurement. Keep feet

flat on floor.

• Do not touch cuff or monitor during measurement procedure.

•Itissuggestedthatyoutakeyourmeasurementsatthesame

time each day and use the same wrist for consistency.

•Usersshouldwaitaminimumof5minutesbeforetaking

additional measurements. More time may be necessary

depending upon your physiology.

• The measurement results that users receive are for

reference only. If users have any blood pressure

concerns, please consult a physician.

• Once inflation reaches 300 mmHg, the unit will deflate

automatically for safety reasons.

• This product is not suitable for people with arrhythmias.

• Thisdevicemayhavedifficultydeterminingtheproper

blood pressure for pregnant women and for users with

irregular heartbeat, diabetes, poor circulation of blood,

kidney problems, or for users who have suffered a

stroke.

CARE, MAINTENANCE & CLEANING

•Cleanthebloodpressuremonitorbodyandcuff

carefully with a slightly damp, soft cloth. Do not press.

Do not wash cuff or use chemical cleaner on it. Never

use thinner, alcohol or petrol (gasoline) as a cleaner.

•Leakybatteriescandamagetheunit.Removethe

batteries when the unit will not be used for a long

time.

•Followlocalordinancesandrecyclinginstructions

regarding disposal or recycling of the device and

device components, including batteries.

•Iftheunitisstorednearfreezing,allowittoacclimate

to room temperature before use.

•Thisbloodpressuremonitorisnotfieldserviceable.

You should not use any tool to open the device nor

should you attempt to adjust anything inside the

device. If you have any problems with this device,

please contact HoMedics Consumer Relations

(contact information on warranty page).

•Do not immerse the unit in water as this will result in

damage to the unit.

•  Do not subject the monitor or cuff to extreme

temperatures, humidity, moisture, or direct sunlight.

Protect from dust.

•Do not fold the cuff tightly.

•Do not disassemble the monitor or cuff. If in need of

repair, refer to the warranty section of this manual.

•Do not subject the monitor to extreme shocks (do not

drop on floor).

•Do not inflate the cuff unless wrapped around wrist.

•Do not wrap the cuff around body parts other than

your wrist.

•Do not drop or insert any object into any opening.

•Thismonitormaynotmeetitsperformance

specifications if stored or used outside of these

temperature and humidity ranges:

• Storage/Transportation

Environment

Temperature:

-13°F~158°F

(-25°C~70°C)

Humidity:

Lessthan93%RH

• Operation

Environment

Temperature:

41°F~104°F

(5°C~40°C)

Humidity:

15~93%RH

POTENTIAL FOR ELECTROMAGNETIC

INTERFERENCE

To avoid inaccurate results caused by electromagnetic interference

between electrical and electronic equipment, do not use the device near a

cell phone or microwave oven.

ThisdevicecomplieswithPart15oftheFCCRules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

NOTE:ThemanufacturerisnotresponsibleforanyradioorTV

interference caused by unauthorized modifications to this equipment.

Such modifications could void the user authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the

limitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•Reorientorrelocatethereceivingantenna.

•Increasetheseparationbetweentheequipmentandreceiver.

•Connecttheequipmentintoanoutletonacircuitdifferentfrom

that to which the receiver is connected.

•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

devicecomplieswithPart15oftheFCCRules.