Braun Bluetooth Smart Manual de usuario

Marca: Braun

Modelo: Bluetooth Smart

Categoría: Cepillos de dientes eléctricos

Tipo: Manual de usuario

Este manual también es adecuado para

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 1 of 40

English 6

Español 18

Français 30

Internet:

www.oralb.com

www.oralb.ca

www.braun.com

www.service.braun.com

Braun GmbH

Frankfurter Strasse 145

61476 Kronberg

Germany/Alemania/Allemagne

Charger Type 3757

Charging Stand Type 3755

Handle Type 3765

Travel Case Type 3760

Power Cord Type 492-5214

Tipo de cargador 3757

Tipo de base cargadora 3755

Tipo de mango 3765

Tipo de estuche portátil 3760

Tipo de cable eléctrico 492-5214

Type de chargeur 3757

Type de support de recharge 3755

Type de manche 3765

Type d’étui de voyage 3760

Type de cordon d’alimentation 492-5214

91864686/III-18

EN/E/F

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 2 of 40

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 3 of 40

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 4 of 40

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 5 of 40

IMPORTANT

SAFEGUARDS

Your Oral-B® toothbrush has been

carefully designed to offer you and your

family a unique brushing experience

that is both safe and effective.

When using electrical products,

especially when children are present,

basic safety precautions should always

be followed, including the following:

Read all instructions before

using.

DANGER

In order to reduce the risk of electrocution:

1. Do not use while bathing.

2. Do not place or store the charger/charging

stand, power cord or charging travel case

where it can fall or be pulled into a tub or sink.

3. Do not place the charger/charging stand,

power cord or charging travel case in water

or other liquid.

4. Do not reach for a charger/charging stand,

power cord or charging travel case that has

fallen into water. Unplug immediately.

WARNING

To reduce the risk of burns, electrocution, fire

or injury:

1. Close supervision is necessary when this

product is used by, on, or near children or

persons with disabilities.

2. Use this product only for its intended use

as described in this manual. Do not use

attachments not recommended by the

manufacturer.

3. Keep cord away from heated surfaces.

4. Never drop the appliance or insert any

object into any opening of the appliance.

5. Never operate this product if it has a

damaged cord or plug, if it is not working

properly, if it has been dropped or

damaged or if it has been dropped into

water. If any of these occur, please

contact a service center and return the

product for examination and repair.

6. Do not use on self when drowsy or on

another who is drowsy or sleeping.

7. Do not use outdoors or operate where

aerosol (spray) products are being used or

where oxygen is being administered.

IMPORTANT

1. Periodically check the entire product/

cords/accessories for damage. A

damaged or non-functioning unit should

no longer be used. If the product/cords/

accessories are damaged, take it to an

Oral-B Service Center.

2. Do not touch the power plug with wet

hands. This can cause an electric shock.

3. When unplugging, always hold the power

plug instead of the cord.

4. Do not modify or repair the product. This

may cause fire, electric shock or injury.

Consult your dealer for repairs or contact

an Oral-B Service Center.

5. This appliance contains batteries that are

non-replaceable. The appliance has no

user serviceable parts. Do not open and

disassemble device except when

disposing of the battery. Follow handling

and disposal instructions of the battery/

device described in this manual.

6. Do not use on children under age 3.

7. This toothbrush is a personal care device

and is not intended for use on multiple

patients in a dental practice or institution.

8. The charging travel case is provided with

a special cord set (power cord), which has

an integrated Safety Extra Low Voltage

power supply. Do not exchange or tamper

with any part of it, otherwise there is risk

of an electric shock. Only use the special

cord set/charger/charging stand provided

with your appliance.

CAUTION

To avoid brush head breakage which may

generate a small parts choking hazard or

damage teeth:

• Prior to each use, ensure the brush head

fits well. Discontinue use of the

toothbrush, if brush head no longer fits

properly. Never use without a brush head.

• If the toothbrush handle is dropped, the

brush head should be replaced before the

next use even if no damage is visible

• Replace brush head every 3 months or

sooner if brush head becomes worn.

• Clean brush head properly after each use

(see «Cleaning recommendations»

paragraph). Proper cleaning ensures the

safe use and functional life of the

toothbrush.

If you are undergoing treatment for any oral

care condition, consult your dental

professional prior to use.

SAVE THESE

INSTRUCTIONS

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 6 of 40

English

Important Information

• Your Oral-B toothbrush can be used with

your smartphone (find details under

«Connecting your toothbrush to your

Smartphone»).

• To avoid electromagnetic interference and/

or compatibility conflicts, deactivate the

radio transmission of your toothbrush

handle (5) before using it in restricted

surroundings, such as aircrafts or specially

marked areas in hospitals.

• Deactivate radio transmission by

simultaneously pressing the on/off (3) and

mode button (4) for 2 seconds until the

radio transmission display (7) goes off.

Follow the same procedure to reactivate

transmission again.

• Persons with pacemakers should always

keep the toothbrush more than six inches

(15 centimeters) from the pacemaker while

turned on. Anytime you suspect

interference is taking place, deactivate the

radio transmission of your handle.

Description

1 Brush head

2 Smart Ring

3 On/off button

4 Brushing mode button

5 Handle

6 Brushing mode display

7 Radio transmission display (with

Bluetooth® wireless technology)

8 Charge level display

Accessories (depending on model):

9 Basic charger (with fixed cord)

10 Brush head holder

11 Brush head compartment with protective

cover

12 Charging travel case

12a Charge indicator light

12b USB port

12c Power cord port

12d Inner lid (with smartphone holder)

12e Removable inlay

13 Power cord (power supply)

14 Charging stand (with detachable cable)

15 Smartphone holder

15a Holding brackets

15b Lever arm

15c Pull tab

15d Suction cup

16 Travel case (with removable inlay)

17 Basic travel case

Note: Content may vary based on the model

purchased.

Specifications

For voltage specifications refer to the bottom of

the charging unit.

Noise level: 68 dB(A)

Charging and Operating

Your toothbrush has a waterproof handle, is

electrically safe and designed for use in the

bathroom.

• You may use your toothbrush right away or

charge it briefly by placing it on the

plugged-in basic charger (9) or charging

stand (14). When using the charging stand

(14) use the extra power cord (13) provided

(picture B). The power cord may be used for

all global mains voltage ranges (100 -240V).

Note: In case the battery is empty (no lights

illuminated on charge level display (8) while

charging or no reaction when pressing the

on/off button (3)), charge at least for 30

minutes.

• The charge level is indicated on the charge

level display (8). Flashing lights indicate that

the battery is charging (picture ➀/B); once it

is fully charged, the lights turn off. A full

charge typically takes 12 hours and enables

at least 2 weeks of regular brushing (twice a

day, 2 minutes).

Note: At a very low charge level, the lights

might not flash immediately; it can take up

to 30 minutes.

• If the battery is running low, a red light is

flashing on the charge level display and the

motor is reducing its speed. Once the

battery is empty, the motor will stop; it will

need at least a 30-minute charge for one

usage.

• You can always store the handle on the

plugged-in charger to maintain it at full

power; a battery overcharge is prevented by

device.

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 7 of 40

Note: Store handle at room temperature for

optimal battery maintenance.

Caution: Do not expose handle to

temperatures higher than 50°C / 122°F.

Using your toothbrush

Brushing technique

Wet brush head and apply any kind of

toothpaste. To avoid splashing, guide the brush

head to your teeth before switching on the

handle (picture ➁). When brushing your teeth

with one of the Oral-B oscillating-rotating

brush heads guide the brush head slowly from

tooth to tooth, spending a few seconds on each

tooth surface (picture ➂). When using the Oral-B

«Deep Sweep» brush head place the

toothbrush bristles against the teeth at a slight

angle towards the gumline. Apply light pressure

and start brushing in back and forth motions, just

like you would do with a manual toothbrush.

With any brush head start brushing the outsides,

then the insides and finally the chewing surfaces.

Brush all four quadrants of your mouth equally.

You may also consult your dentist or dental

hygienist about the right technique for you.

In the first days of using any electric

toothbrush, your gums may bleed slightly. In

general, bleeding should stop after a few days.

Should it persist after 2 weeks, please consult

your dentist or dental hygienist. If you have

sensitive teeth and/or gums, Oral-B

recommends using the «Sensitive» mode

(optional in combination with an Oral-B

«Sensitive» brush head).

Smart Ring features

Your toothbrush is equipped with a Smart Ring

(2) that has various functionalities indicated via

different colors of light:

White (default) = Operating and visual timer

light (choose individual color via Oral-B™ app

settings)

Red = Pressure sensor light

Blue = Bluetooth® pairing indicator

Timer

You can choose between «Professional» or

«2-Minute» timer.

The «2-Minute» timer signals with a long

stuttering sound and a flashing light of the

Smart Ring (2) that the professionally

recommended 2-minute brushing time has

been reached.

The «Professional» timer signals with a short

stuttering sound and a flashing light of the

Smart Ring at 30-seconds intervals to move to

the next quadrant of your mouth (picture ➂). A

long stuttering sound and a flashing light

indicate the end of the professionally

recommended 2-minute brushing time.

The timer memorizes the elapsed brushing

time, even when the handle is briefly switched

off during brushing. The timer resets if pausing

longer than 30 seconds, briefly pressing the

mode button (4) during pause or placing the

handle on the plugged-in charger.

Note: During the use of special Oral-B™ app

features, the visual timer light may be

deactivated.

Timer setup:

Your toothbrush comes with the «Professional»

timer activated. To change this, press and hold

the mode button (4) for 2 seconds. Toggle

between timer selection by pressing the on/off

button (3). Confirm selection by pressing the

mode button.

• 2 LED’s illuminated indicate «2-Minute» timer

• 4 LED’s illuminated indicate «Professional» timer

Note: You can also set/advance the timer

functionality via Oral-B™ App.

Pressure sensor

If too much pressure is applied, the Smart Ring

(2) will light up in red, reminding you to reduce

pressure. In addition the pulsation of the brush

head will stop and the oscillation movement of

the brush head will be reduced (during «Daily

Clean», «Pro Clean» and «Sensitive» mode)

(picture ➂).

Periodically check the operation of the pressure

sensor by pressing moderately on the brush

head during use.

Brushing modes (depending on model)

Your toothbrush offers different brushing

modes indicated on the brushing mode display

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 8 of 40

(6) on your handle («Daily Clean» mode does

not illuminate on the brushing mode display):

«Daily Clean» – Standard mode for

daily mouth cleaning

«Pro Clean» – For an extraordinary

clean feeling (operated

with a higher frequency)

«Sensitive» – Gentle, yet thorough

cleaning for sensitive

areas

«3D White» – Polishing for occasional

or everyday use

«Gum Care» – Gentle massage of

gums

«Tongue Clean» – Tongue cleaning for

occasional or everyday

use

When operating the «Tongue Clean» mode, we

recommend using the «Sensitive» brush head.

You can brush your tongue either with or without

toothpaste. Brush the whole area of your tongue

systematically in gentle movements. The

recommended brushing time is 20 seconds;

indicated with a flashing light of the Smart Ring.

Your toothbrush automatically starts in the mode

selected last. To switch to other modes,

successively press the mode button during use

(picture ➃). To return from any mode back to «Daily

Clean» mode, press and hold the mode button (4).

Note: You can also set/advance the mode

functionality via Oral-B™ App.

Brush heads

Oral-B offers you a variety of different Oral-B

brush heads that fit your Oral-B toothbrush

handle.

Our oscillating-rotating brush heads can be

used for tooth-by-tooth precision cleaning.

Oral-B Gentle Clean brush head

features a combination of regular

bristles to clean teeth surfaces

and ultrathin bristles for a gentle

brushing experience on the

gumline.

Oral-B CrossAction brush head

Our most advanced brush head.

Angled bristles for a precise

clean. Lifts and powers away

plaque.

Oral-B FlossAction brush head

features micropulse bristles that

allow for an outstanding plaque

removal in the interdental areas.

Oral-B 3D White brush head

features a special polishing cup

to naturally whiten your teeth.

Please note that children under

12 years old should not use the

Oral-B «3D White» brush head.

Oral-B Sensitive brush head

features an extra soft bristle

structure that is gentle on teeth

and gums.

Our dynamic «Deep Sweep» brush head can

be used with all common brushing techniques.

Oral-B Deep Sweep brush head

features triple zone cleaning

action for outstanding plaque

removal, even in between teeth.

Most Oral-B brush heads feature light blue

INDICATOR® bristles to help you monitor brush

head replacement need. With thorough

brushing, twice a day for two minutes, the blue

color will fade halfway approximately within 3

months, indicating the need to exchange your

brush head. If the bristles splay before the color

recedes, you may exert too much pressure on

teeth and gums.

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 9 of 40

We do not recommend using the Oral-B

«FlossAction» or Oral-B «3D White» brush head

with braces. You may use the Oral-B «Ortho»

brush head, specifically designed to clean

around braces and wires.

Connecting your

toothbrush to your

Smartphone

The Oral-B™ App is available for mobile

devices running iOS or Android operating

systems. It can be downloaded for free from

App Store

or Google Play™.

Your handle has a sensor installed that, together

with a «position detection» feature in the app,

helps you to detect what areas to brush and for

how long so you will never miss a zone. Use it

along with your smartphone holder (find details

under «Accessories - Smartphone Holder»).

Furthermore, the Oral-B™ App gives you the

opportunity to chart your brushing progress and

customize your toothbrush settings (for many

more benefits see the Oral-B™ App instructions).

• Start the Oral-B™ App. It will guide you

through the entire Bluetooth pairing

procedure.

Note: Oral-B™ App functionality is limited if

Bluetooth wireless technology is deactivated

on your smartphone (for directions please

refer to your smartphone’s user manual).

• Any app instructions will be displayed on

your smartphone.

• If Bluetooth wireless technology is activated

on your handle, the Bluetooth symbol on the

radio transmission display (7) illuminates.

Once the handle is paired, the Smart Ring

(2) flashes briefly.

• Keep your smartphone in close proximity

(within 5m/16ft distance) when using it with

the handle. Make sure the smartphone is

safely positioned in a dry place.

Note: Your smartphone must support Bluetooth

4.0 (or higher)/Bluetooth Smart in order to pair

your handle.

Compatible smartphones are listed in App

Store

(SM)

or Google Play™.

Caution: Follow your smartphone’s user manual

to ensure your phone/charger is designed for

use in a bathroom environment.

Cleaning

recommendations

After brushing, rinse your brush head under

running water with the handle switched on.

Switch off and remove the brush head. Clean

handle and brush head separately; wipe them

dry before reassembling. Unplug the basic

charger/charging stand before cleaning. Brush

head holder (10), brush head compartment and

protective cover (11) and removable travel case

inlays (12e) are dishwasher-safe.

To be cleaned with a damp cloth only:

Basic charger (9), charging stand (14), charging

travel case (12), basic travel case (17), travel

case (16), power cord (13), smartphone holder

(15) (picture ➄).

Accessories

(depending on model)

Smartphone Holder

Before each use, make sure mirror, suction cup

surface (15d) and holding brackets (15a) are

always clean and dry (picture C1). Use a

fuzz-free cloth for cleaning suction cup surface

and mirror. In particular make sure suction cup

surface and mirror are free from any

contamination (e.g. hair, dust, oil, fuzz, dirt etc.).

• Press your smartphone holder (15) just with

enough pressure, centered at nose level on

a sturdy mirror. Then mount the holder by

pressing the lever arm (15b) towards the

mirror until it snaps in (picture C2).

Note: Only affix on mirror to ensure safe and

correct conditions. For use in bathroom

only. Do not use in automobiles.

• Always make sure the smartphone holder is

securely mounted on the mirror before

inserting your smartphone. Place your

smartphone (portrait) sideways in between the

holding brackets (15a) by pressing against one

bracket with your phone and sliding the other

bracket to the side (picture C3). Follow the

same procedure to remove your phone again.

• Adjust the overall position for the required

angle by moving the ball joint of the holder

(picture C4).

• Once done, remove your phone from the

holder. Take off the smartphone holder by

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 10 of 40

flipping the lever arm back and pulling the

tab carefully (picture C5 1./2.). Affix

smartphone holder with each use again.

• The smartphone holder should be cleaned

with a damp fuzz-free cloth only (picture ➄).

You may use glass cleaner, alcohol or

similar products (avoid products with

silicone oil). Make sure the surface is dry

and dust free after cleaning. Store in clean

and dry place. If not in use, always remove

your smartphone from the holder.

Note: Smartphone width required for usage:

minimum 58mm (2.28 in), maximum 83mm

(3.27 in).

Caution: Small parts may come off, keep

out of reach of children.

Follow your smartphone’s user manual to

ensure your phone/charger is designed for use

in a bathroom environment.

Charging Travel Case

• To charge your handle (5) place it on the pin

in the charging travel case (12) and connect

it to an electric outlet, using the extra power

cord (13) provided. The power cord may be

used for all global mains voltage ranges (100

-240V).

• The flashing light (12a) of the charging travel

case indicates that the handle is charging.

Once the handle is fully charged the light

turns off. A full charge typically takes 12

hours (picture B1).

Note: You may use the USB port (12b) to

charge an electric device while the charging

travel case is plugged in. The handle can

only be charged with the power cord (13)

and not via USB port.

• The inner lid of the travel case has a built-in

smartphone holder (12d), which can hold your

smartphone while using (picture B2). Before

use, make sure your phone fits the stand and

keeps stable.

• The removable inlay (picture B3) (12e) of the

travel case is dishwasher-safe (picture ➄).

The outer case should be cleaned with a

damp cloth only. Make sure that travel case

parts are completely dry before

reassembling and toothbrush/brush heads

are dry before storing in the travel case.

Note: Clean stains on travel case surface

immediately. Store travel case in a clean and

dry place.

Follow your smartphone’s user manual to

ensure your phone/charger is designed for

use in a bathroom environment.

Travel Cases

• Store the clean and dry toothbrush/brush

heads in the basic travel case (17) or travel

case (16) (picture E/D).

• Basic travel case/travel case should be

cleaned with a damp cloth only (picture ➄).

The removable inlay of the travel case (16) is

dishwasher-safe. Store in clean and dry

place.

Subject to change without notice.

Environmental

Notice

Product contains batteries and/or

recyclable electric waste. For

environment protection do not

dispose in household waste, but for

recycling take to electric waste

collection points provided in your

country.

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 11 of 40

Battery removal at

the end of the

product’s useful life

Do not disassemble the product except when

disposing of the battery. Run down battery

before removing. When taking out the battery

for disposal, use protective clothing (gloves,

safety glasses, etc.) to omit skin contact whilst

leaking batteries. Use caution not to short the

positive (+) and negative (–) terminals. Insulate

terminals (e.g. with tape) and put the battery in

a plastic bag for disposal.

Open the handle as shown, remove the battery

and dispose of it according to local

environmental regulations.

Caution! Opening the handle will destroy the

appliance and invalidate the warranty.

Information

Bluetooth® radio module

Although all indicated functions on the

Bluetooth device are supported, Oral-B does

not ensure 100% reliability in connection, and

feature operation consistency.

Operation performance and connection

reliability are direct consequences of each

individual Bluetooth device, software version,

as well as the operating system of those

Bluetooth devices and company security

regulations implemented on the device.

Oral-B adheres to and strictly implements the

Bluetooth standard by which Bluetooth devices

can communicate and function in Oral-B

toothbrushes.

However, if device manufacturers fail to

implement this standard, Bluetooth

compatibility and features will be further

compromised and the user may experience

functional and feature-related issues. Please

note that the software on the Bluetooth device

can significantly affect compatibility and

operation.

1) Warranty – Exclusions and Limitations

This limited warranty applies only to the new

products manufactured by or for The Procter &

Gamble Company, its Affiliates or Subsidiaries

(“P&G”) that can be identified by the Braun/

Oral-B trademark, trade name, or logo affixed

thereto. This limited warranty does not apply to

any non-P&G product including hardware and

software. P&G is not liable for any damage to or

loss of any programs, data, or other information

stored on any media contained within the

product, or any non-P&G product or part not

covered by this limited warranty. Recovery or

reinstallation of programs, data or other

information is not covered under this limited

warranty.

This limited warranty does not apply to (i)

damage caused by accident, abuse, misuse,

neglect, misapplication, or non-P&G product;

(ii) damage caused by service performed by

anyone other than Braun or authorized Braun

service location; (iii) a product or part that has

been modified without the written permission

of P&G, and (iv) damage arising out of the use

of or inability to use the Oral-B Smartphone

stand/puck, Smartphone mirror holder, or

charging travel case (“Accessories”).

2) Using your smartphone holder

The Oral-B Accessories included in the

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 12 of 40

package has been designed to provide you

with a convenient way to position your

smartphone while you are using the Oral-B

app. Try multiple orientations of your

smartphone in the Oral-B smartphone holder

prior to use to determine the best positioning of

your smartphone in the holder. Be sure to try

this in a manner which will not harm your

smartphone if it falls out of the stand. Do not

use in automobiles.

LIMITATION OF LIABILITY

TO THE EXTENT PERMITTED BY APPLICABLE

LAW, IN NO EVENT SHALL P&G, ITS

DISTRIBUTORS OR SUPPLIERS BE LIABLE TO

YOU OR ANY THIRD PARTY FOR ANY DIRECT,

INDIRECT, INCIDENTAL, CONSEQUENTIAL,

SPECIAL, EXEMPLARY OR PUNITIVE DAMAGES,

OF ANY NATURE WHATSOEVER, ARISING OUT

OF THE USE OF OR INABILITY TO USE THE

ORAL-B ACCESSORIES, INCLUDING, WITHOUT

LIMITATION, INJURY TO PERSONS, PROPERTY

DAMAGE, LOSS OF VALUE OF ANY THIRD

PARTY PRODUCTS THAT ARE USED IN OR

WITH THE ORAL-B ACCESSORIES, OR LOSS

OF USE OF THE ORAL-B ACCESSORIES OR

ANY THIRD PARTY PRODUCTS THAT ARE USED

IN OR WITH THE ORAL-B ACCESSORIES, EVEN

IF P&G HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. WITHOUT

LIMITING THE FOREGOING, YOU UNDERSTAND

AND AGREE THAT P&G HAS NO LIABILITY FOR

ANY DAMAGE OR DESTRUCTION TO

CONSUMER ELECTRONICS DEVICES OR

OTHER PERSONAL PROPERTY THAT ARE

CONTAINED ON OR EXTERIOR TO THE ORAL-B

ACCESSORIES, OR ANY LOSS OF DATA

CONTAINED IN THE FOREGOING DEVICES. IN

NO EVENT SHALL ANY RECOVERY AGAINST

ORAL-B EXCEED THE ACTUAL PRICE PAID FOR

THE PURCHASE OF THE PRODUCT.

Warranty replacement brush heads

Oral-B warranty will be voided if electric

rechargeable handle damage is found to be

attributed to the use of non-Oral-B replacement

brush heads.

Oral-B does not recommend the use of

non-Oral-B replacement brush heads.

• Oral-B has no control over the quality of

non-Oral-B replacement brush heads.

Therefore, we cannot ensure the cleaning

performance of non-Oral-B replacement

brush heads, as communicated with the

electric rechargeable handle at time of initial

purchase.

• Oral-B cannot ensure a good fit of non-Oral-B

replacement brush heads.

• Oral-B cannot predict the long-term effect of

non-Oral-B replacement brush heads on

handle wear.

All Oral-B replacement brush heads carry the

Oral-B logo and meet Oral-B’s high quality

standards. Oral-B does not sell replacement

brush heads or handle parts under any other

brand name.

Satisfaction

Guaranteed or Your

Money Back:

Try it with no risk for 60 days!

If you are not 100% satisfied, call

1-877-593-4199 to receive a full refund. Return

the product in its original packaging along with

the original cash receipt postmarked within 60

days of purchase to receive a pre-paid card in

the amount of purchase. Terms of prepaid card

apply.

Your Oral-B toothbrush must be returned in its

original packaging and be postmarked no later

than 60 days after the date of purchase. Please

allow 6-8 weeks for handling. In the U.S., the

shipment return costs of the product is the

responsibility of the consumer. Sorry: No

refunds will be made for any Oral-B product

damaged by accident, neglect, unreasonable

use or lost in the post.

Terms and conditions apply. For further details

please contact our customer service.

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 13 of 40

Trouble Shooting

Problem Possible reason Remedy

APP

Handle does not

operate

(properly) with

Oral-B™ app.

1. Oral-B™ App is turned off.

2. Bluetooth interface is not

activated on smartphone.

3. Radio transmission is

deactivated on handle;

radio transmission display

(7) is turned off.

4. Bluetooth connection to

smartphone has been lost.

5. Your smartphone does not

support Bluetooth 4.0 (or

higher)/Bluetooth Smart.

6. Handle on plugged-in

charger.

1. Turn on Oral-B™ App.

2. Activate Bluetooth interface on

smartphone (described in its user

manual).

3. Activate radio transmission by

simultaneously pressing on/off (3) and

mode button (4) for 2 seconds until radio

transmission display (7) turns on.

4. Pair handle and smartphone again via

app settings. Keep your smartphone in

close proximity when using it with handle.

5. Your smartphone must support Bluetooth

4.0 (or higher)/Bluetooth Smart in order to

pair handle. Check App Store

(SM)

Google Play™ for compatible

smartphones.

6. Radio transmission is deactivated while

handle is placed on plugged-in charger.

Reset to factory

settings.

Original app functionality

wanted.

Press and hold on/off button (3) for 10

seconds until all indicator lights double blink

simultaneously.

TOOTHBRUSH

Handle is not

operating (during

first use).

Battery has a very low

charge level; no lights

illuminate.

Charge at least for 30 min.

1. Short

stuttering

sounds/flashing

light every 30

seconds or after

2 minutes.

2. Handle does

not operate any

timer.

1. «Professional timer» or

«2-Minute timer»

activated.

2. Timer has been modified/

deactivated via app.

1. Set your timer to 2-Minute timer

(stuttering sounds/flashing light after

2min); or set your timer to Professional

timer (stuttering sounds/flashing light

every 30 seconds). Follow steps under

«Timer setup».

2. Use app to change timer settings or

perform factory reset (see App Trouble

Shootings).

Handle does not

charge.

1. Battery is at a very low

charger level.

2. Ambient temperature for

charging is out of valid

range (≤ 0 °C and ≥ 60

°C)/(≤ 32 °F and ≥ 140 °F).

1. Charging lights might not flash

immediately; it can take up to 30 minutes.

2. Recommended ambient temperature for

charging is 5 °C/41 °F to 35 °C/95 °F.

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 14 of 40

FOR USA ONLY

Limited 2-Year Warranty

Oral-B warrants this appliance to be free of defects in material and workmanship for a period of

two years from the date of original purchase at retail. If the appliance exhibits such a defect,

Oral-B will, at its option, repair or replace it without cost for parts and labor. The product must be

carried in or shipped, prepaid and insured (recommended), to an authorized Oral-B Service

Center. Proof of date of original purchase is required.

The cost to ship the product to an authorized Service Center is the responsibility of the consumer,

the cost to return the product to the consumer is the responsibility of Oral-B. This warranty does

not cover finishes or normal wear, nor does it cover damage resulting from accident, misuse, dirt,

water, tampering, unreasonable use, service performed or attempted by unauthorized service

agencies, failure to provide reasonable and necessary maintenance, including recharging, or units

that have been modified or used for commercial purposes.

This appliance is equipped with a Bluetooth Smart approved radio module. Failure to establish a

Bluetooth Smart connection to specific smart phones is not covered under the device guarantee,

unless the Bluetooth radio module of this appliance is damaged. The Bluetooth devices are

warranted by their own manufacturers and not by Oral-B. Oral-B does not influence or make any

recommendations to device manufacturers, and therefore Oral-B does not assume any

responsibility for the number of compatible devices with our Bluetooth systems.

Oral-B reserves the right, without any prior notice, to make any technical modifications or

changes to system implementation of device features, interface, and menu structure changes that

are deemed necessary to ensure that Oral-B systems function reliably.

ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO TWO YEARS

FROM DATE OF ORIGINAL PURCHASE. IN NO EVENT WILL ORAL-B BE RESPONSIBLE FOR

CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so

the above limitation may not apply to you. This warranty gives you specific legal rights, and you

may have other legal rights which vary from state to state.

How to obtain service in the USA

Should this product require service, please call 1-800-566-7252 to be referred to the authorized

Oral-B Service Center closest to you.

To obtain service:

A. Carry the product in to the authorized Oral-B Service Center of your choice or,

B. Ship the product to the authorized Oral-B Service Center of your choice. Pack the product

well. Ship the product prepaid and insured (recommended). Include a copy of your proof of

purchase to verify warranty coverage, if applicable.

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 15 of 40

To obtain original Oral-B replacement parts and accessories:

Contact an authorized Oral-B Service Center.

Please call 1-800-566-7252 to be referred to the authorized Oral-B Service Center closest to you.

To order original Oral-B replacement parts and accessories (including replacement brush heads)

by phone: Please call 1-800-566-7252.

To speak to an Oral-B Consumer Service Representative: Please call 1-800-566-7252.

FCC Compliance Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Section 15.21 Information to user:

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

Section 15.105 (b)

Note: This equipment has been tested and found to comply with the Limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 16 of 40

FOR CANADA ONLY

Limited 2-Year Warranty

In the event this appliance fails to function within the specified warranty period because of defects

in material or workmanship, and the consumer returns the unit to an authorized service center,

Braun Canada will, at its option either repair or replace the unit without additional charge to the

consumer. This warranty does not cover any product which has been damaged by dropping,

tampering, servicing performed or attempted by unauthorized service agencies, misuse or abuse.

This warranty excludes units which have been modified or used for commercial purposes.