Panasonic DVD Recorder DMR-E75V Manual de usuario

Marca: Panasonic

Modelo: DVD Recorder DMR-E75V

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Este manual también es adecuado para

P PC

Operating Instructions

DVD Video Recorder

Model No. DMR-E75V

Dear Customer

Thank you for purchasing this product. For optimum performance

and safety, please read these instructions carefully.

Before connecting, operating or adjusting this product, please read

these instructions completely.

Please keep this manual for future reference.

VQT0H76

For U.S.A. only

The warranty can be found on page 71.

For Canada only

The warranty can be found on page 72.

La guía rápida en español se encuentra en la página 75–83.

PP-Sample.book 1 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and maintenance

(servicing) instructions in the literature

accompanying the appliance.

(Inside of product)

Warning and Important Information

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK OR PRODUCT DAMAGE, DO NOT

EXPOSE THIS APPARATUS TO RAIN,

MOISTURE, DRIPPING OR SPLASHING AND

THAT NO OBJECTS FILLED WITH LIQUIDS,

SUCH AS VASES, SHALL BE PLACED ON THE

APPARATUS.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,

BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.

ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT

RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO

OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER

MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE SCREWS.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s

attention to Article 820-40 of the NEC that provides guidelines for

proper grounding and, in particular, specifies that the cable

ground shall be connected to the grounding system of the

building, as close to the point of cable entry as practical.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

≥Reorient or relocate the receiving antenna.

≥Increase the separation between the equipment and receiver.

≥Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

≥Consult the dealer or an experienced radio/TV technician for

help.

FCC Caution: To assure continued compliance, follow the

attached installation instructions and use only shielded interface

cables when connecting to peripheral devices.

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to

operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

RQLS0233

VARNING

SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA

DEL

ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.

VORSICHT

SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG

GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.

ATTENTION

RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D’OUVERTURE.

EXPOSITION DANGEREUSE AU FAISCEAU.

DANGER

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

AVOID DIRECT EXPOSURE TO BEAM.

(FDA 21 CFR)

CAUTION

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

AVOID EXPOSURE TO BEAM.

(IEC60825-1)

ADVARSEL

SYNLIG OG USYNLIG LASERSTR

LING VED

ÅBNING.

UNDG

Å UDSÆTTELSE FOR STRÅLING.

VARO!

AVATTAESSA OLET ALTTIINA N

ÄKYVÄÄ JA

ÄKYMÄTÖN

LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.

ADVARSEL

SYNLIG OG USYNLIG LASERSTR

LING

NÅR

DEKSEL

ÅPNES.

UNNG

Å EKSPONERING FOR STRÅLEN.

PP-Sample.book 2 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

Read these operating instructions carefully before using the unit.

Follow the safety instructions on the unit and the applicable safety

instructions listed below. Keep these operating instructions handy for

future reference.

(1) Read these instructions.

(2) Keep these instructions.

(3) Heed all warnings.

(4) Follow all instructions.

(5) Do not use this apparatus near water.

(6) Clean only with dry cloth.

(7) Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions.

(8) Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

(9) Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than

the other. A grounding-type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided

for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

(10) Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

(11) Only use attachments/accessories specified by the

manufacturer.

(12) Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

(13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

(14) Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped.

Pages to be referred to are indicated as (l ±±).

The explanations concerning discs are indicated by [DVD], those

concerning video are indicated by [VHS].

(U.S.A. only)

Product Registration Card

Please complete and return the included product registration card, or

You can enjoy both VHS and DVD with this unit.

This DVD Video recorder records high quality images to rapid

random access capable DVD-RAM media. This has resulted in many

new features that outperform older tape formats. The following

information summarizes a few of these features.

Instant play (l 21, 33)

There is no need to rewind or search forward. Direct Navigator

guides you to the beginning of the recorded video immediately.

Instant recording (l 26)

You no longer need to search for empty disc space. By pressing the

recording button, the unit finds available recording space and begins

recording right away. There is no need to worry about overwriting

already recorded content.

Chasing playback (l 25)

There is no need to wait until recording is complete. Without stopping

recording, you can play the video currently being recorded from its

beginning.

Simultaneous Recording and Play (l 25)

While recording, you can play another video program that was

recorded previously.

Time Slip (l 23, 25)

During play and also while recording, you can jump to the scene you

wish to view by specifying the skip time.

One touch dubbing (l 58, 60)

Memorable contents on VHS can be easily dubbed onto DVD. “One

touch 2-way Transfer/Dubbing” enables you to copy from VHS to

DVD and vice versa.

IMPORTANT SAFETY INSTRUCTIONS

The manufacturer accepts no responsibility and offers no

compensation for loss of recorded or edited material due to a

problem with the unit or recordable media, and accepts no

responsibility and offers no compensation for any

subsequent damage caused by such loss.

Examples of causes of such losses are

≥A disc recorded and edited with this unit is played in a DVD

recorder or computer disc drive manufactured by another

company.

≥A disc used as described above and then played again in this

unit.

≥A disc recorded and edited with a DVD recorder or computer

disc drive manufactured by another company is played in this

unit.

About descriptions in these Operating

Instructions

Accessories

Please check and identify the supplied

accessories. Use numbers indicated in

parentheses when asking for replacement parts.

Only for U.S.A.: To order accessories, refer to

“Accessory Purchases” on page 71.

Only for Canada: To order accessories, call the dealer from

whom you have made your purchase.

∏ 1 AC power supply cord

(K2CB2CB00006)

≥For use with this unit only. Do not use it

with other equipment.

∏ 1 75 ≠ coaxial cable

(K1TXAAA00001)

∏ 1 Audio/Video Cable

(K2KA6CA00001)

∏ 2 Batteries for the Remote

Control

R6 size

∏ 1 Remote Control

(EUR7721X10)

Useful features

ENGLISH

PP-Sample.book 3 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

Warning and Important Information ..................................................2

IMPORTANT SAFETY INSTRUCTIONS..........................................3

About descriptions in these Operating Instructions ..........................3

Accessories ......................................................................................3

Useful features..................................................................................3

Contents ...........................................................................................4

Control reference guide ....................................................................6

≥Remote control...........................................................................6

≥Batteries .....................................................................................7

≥Use.............................................................................................7

≥Main unit.....................................................................................7

≥The unit’s display........................................................................8

STEP 1 Connection .........................................................................9

≥Connecting a TV and VCR.......................................................10

≥Connecting a cable TV box/satellite receiver ...........................11

If the antenna connector doesn’t match..........................................11

≥Other antenna connections to the unit .....................................11

≥Other antenna connections from the unit to the TV..................11

Connecting amplifier or system component....................................12

≥To enjoy multi-channel surround sound on DVD-Video

(digital connection).................................................................12

≥Connection to a stereo amplifier (analog connection) ..............12

DVD output and DVD/VHS output ..................................................12

STEP 2 Plug-in Auto Tuning..........................................................13

≥If Plug-in Auto Tuning fails .......................................................14

≥Adding and deleting channels ..................................................14

STEP 3 Channel settings...............................................................15

≥Guide channel settings for VCR Plusi system........................15

≥Channel captions......................................................................16

- Preset Channel Captions.......................................................16

- Manual Channel Captions......................................................16

STEP 4 Set up to match your TV and remote control....................17

≥Selecting TV type .....................................................................17

≥TV operation.............................................................................17

≥When other Panasonic products respond to

this remote control .................................................................17

( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [[DVD]] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ )

Discs...............................................................................................18

≥Discs you can use ....................................................................18

≥More about DVD-RAM and DVD-R ..........................................18

Discs that cannot be played............................................................19

Maintenance ...................................................................................19

Disc handling ..................................................................................19

Inserting discs.................................................................................20

Playback

Playing discs...................................................................................21

≥When a menu screen appears on the TV.................................21

Quick View (Play t1.3) ..................................................................21

Starting play from where you stopped it (Resume Function)..........21

Fast forward and rewind—SEARCH...............................................22

Slow-motion play ............................................................................22

Frame-by-frame viewing.................................................................22

Skipping..........................................................................................22

Direct Play ......................................................................................22

CM Skip ..........................................................................................22

Displaying the TV image as a picture-in-picture/

Selecting an amount of time to skip—Time Slip...........................23

Erasing a title that is being played..................................................23

Create chapters ..............................................................................23

Changing audio during play ............................................................23

Using menus to play MP3 discs......................................................24

≥Using the tree screen to find a group .......................................24

Recording

Playing while you are recording .....................................................25

≥Chasing play ............................................................................25

≥Simultaneous recording and play.............................................25

≥TIME SLIP................................................................................25

Watching the TV while recording....................................................25

Recording TV programs .................................................................26

Playing/Recording VHS while recording.........................................26

≥Recording modes and approximate recording times ...............27

Selecting audio to record................................................................27

Flexible Recording mode (FR) .......................................................27

Timer Recording

Using VCR Plus_ system .............................................................. 28

Manual programming .....................................................................28

Check, change or delete programs ................................................29

Cautions for using timer recording on DVD and VHS ....................29

Advanced Operations

DISC SETTING ..............................................................................30

- Disc Name.............................................................................30

- Disc Protection ......................................................................30

- Format disc............................................................................31

- Select First play.....................................................................31

- Finalize ..................................................................................31

Entering text ...................................................................................32

Using the Direct Navigator .............................................................33

≥Selecting recorded titles to play ...............................................33

≥Direct Navigator .......................................................................33

- Erase .....................................................................................33

- Properties ..............................................................................33

- Edit ........................................................................................34

- Chapter View.........................................................................35

Using play list .................................................................................36

≥Creating play lists.....................................................................36

≥Playing play lists ......................................................................37

≥Using play list to edit play lists/chapters ..................................37

- Erase .....................................................................................37

- Properties ..............................................................................37

- Edit ........................................................................................38

- Chapter View.........................................................................39

Using DISPLAY menus ..................................................................40

≥Common procedures ...............................................................40

- Disc menu .............................................................................40

- Play menu .............................................................................41

- Video menu ...........................................................................41

- Audio menu ...........................................................................41

Various Settings

Changing the unit’s settings ...........................................................42

≥Common procedures ...............................................................42

Entering a password (Ratings).......................................................42

Summary of settings.......................................................................43

Clock Settings ................................................................................46

- Auto Clock Setting.................................................................46

- Time Zone Adjust ..................................................................46

- Manual Clock Setting ............................................................46

FUNCTIONS window .....................................................................47

Status displays ...............................................................................47

≥Changing the information displayed.........................................47

≥Display examples.....................................................................47

(^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^[[VHS]]^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^)

Before Use

Inserting video cassette..................................................................48

Video cassette information.............................................................48

≥Video cassettes........................................................................48

≥Video cassette care .................................................................48

≥Maintenance ............................................................................48

Contents

PP-Sample.book 4 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

Playback

Playing a video cassette .................................................................49

Fast-forward / Rewind.....................................................................49

Cue / Review ..................................................................................49

Jet Search.......................................................................................49

Slow................................................................................................49

Jet Rewind......................................................................................49

S-VHS Quasi Playback (SQPB) .....................................................50

Repeat Playback.............................................................................50

Adjusting the playback picture........................................................50

≥Manual tracking........................................................................50

≥Vertical locking adjustment.......................................................50

Recording

Recording TV programs..................................................................51

Watching the TV while recording....................................................51

Playing/Recording DVD while recording.........................................51

Timer Recording

Using VCR Plus_ system...............................................................52

Manual programming......................................................................52

Auto SP/EP mode...........................................................................53

Check, change or delete programs.................................................53

Cautions for using timer recording on DVD and VHS.....................53

Advanced Operations

Direct Navigator..............................................................................54

≥To save Direct Navigator data..................................................54

≥Selecting programs to play.......................................................54

≥Set the category .......................................................................55

To Check the Recorded Programming Data

(Time Stamp Function).................................................................55

VHS Index Search System (VISS)..................................................55

Various Settings

Changing the unit’s settings............................................................56

≥Common procedures................................................................56

Summary of settings.......................................................................56

Various on-screen display indications ............................................57

Changing audio...............................................................................57

Auto Bilingual Choice Function.......................................................57

(^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^[[DVD/VHS]]^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^)

Advanced Operations

Transfer (Dubbing) from VHS .........................................................58

≥One Touch Transfer (Dubbing) (VHS l DVD).........................58

≥Manual Transfer (Dubbing) ......................................................59

Transfer (Dubbing) from DVD.........................................................60

≥One Touch Transfer (Dubbing) (DVD l VHS).........................60

≥Manual Transfer (Dubbing) ......................................................61

Recording from an external device.................................................62

- DVD .......................................................................................62

- VHS .......................................................................................62

Helpful Hints

Glossary..........................................................................................63

Frequently asked questions............................................................64

Error messages ..............................................................................65

≥Common...................................................................................65

≥DVD..........................................................................................65

≥VHS ..........................................................................................65

Troubleshooting guide ....................................................................66

≥Common...................................................................................66

≥DVD..........................................................................................68

≥VHS ..........................................................................................69

Product Service ..............................................................................70

≥Product information ..................................................................70

Limited Warranty (ONLY FOR U.S.A.) ...........................................71

Limited Warranty (ONLY FOR CANADA).......................................72

Specifications..................................................................................73

Index...............................................................................................74

Español

Antes de uso

≥ Conexión a un televisor o a un VCR ...................................................... 75

( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [[DVD]] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ )

Sintonización automática por enchufe ...........................................76

Ajustes del canal de guía para el sistema VCR Plus+ ...................76

Selección del tipo de televisor........................................................76

Reproducción

Introducción de discos....................................................................77

Reproducción de los discos ...........................................................77

≥ Cuando en el televisor aparece la pantalla de un menú ........................ 77

Vista rápida (Reproducción t1.3)..................................................77

Continuación de la reproducción (Función Resume) .....................77

Avance rápido y rebobinado—SEARCH ........................................77

Reproducción de cámara lenta ......................................................77

Visión cuadro por cuadro ...............................................................78

Salto ...............................................................................................78

Reproducción directa .....................................................................78

Salto CM.........................................................................................78

Visualización de la imagen TV como imagen en imagen/

Selección de la cantidad de tiempo a saltar—Time Slip..............78

Borrado de un título que se está reproduciendo ............................78

Crear capítulos...............................................................................78

Grabación

Reproducción durante la grabación ...............................................79

≥ Reproducción seguida............................................................................ 79

≥ Grabación y reproducción simultáneas .................................................. 79

≥ TIME SLIP.............................................................................................. 79

Recepción de las transmisiones televisivas

durante la grabación ....................................................................79

Grabación de programas televisivos..............................................79

≥ Modos de grabación y tiempo aproximado de grabación....................... 79

Ejecución de grabaciones temporizadas

Uso del sistema VCR Plus+ ........................................................... 80

Programación manual ....................................................................80

Controle, cambie o borre el programa............................................80

Precauciones al usar la grabación temporizada en

DVD y VHS..................................................................................80

(^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^[[VHS]]^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^)

Reproducción

Introducción de un cassette de vídeo.............................................81

Cassette de vídeo ..........................................................................81

Reproducción de un cassette de vídeo..........................................81

Avance rápido / Rebobinado..........................................................81

Localización progresiva / Rebobinado ...........................................81

Búsqueda Jet .................................................................................81

Lento ..............................................................................................81

Rebobinado Jet ..............................................................................81

Cuasi reproducción S-VHS (SQPB)...............................................81

Reproducción repetida ...................................................................81

Grabación

Grabación de programas televisivos..............................................82

Recepción de las transmisiones televisivas

durante la grabación ....................................................................82

Ejecución de grabaciones temporizadas

Uso del sistema VCR Plus+ ........................................................... 83

Programación manual ....................................................................83

Modo SP/EP automático ................................................................83

Controle, cambie o borre el programa............................................83

Precauciones al usar la grabación temporizada en

DVD y VHS..................................................................................83

PP-Sample.book 5 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

(1) DVD/VHS POWER on/off button (Í, DVD/VHS POWER)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 13

(2) Input select button (INPUT SELECT) . . . . . . . . . . . . . . .l 62

(3) DVD/VHS output button (OUTPUT, DVD/VHS) . . . . . . . .l 12

(4) Numeric buttons (0–9)

(5) Cancel/Reset and asterisk button (CANCEL/RESET, ¢)

(6) Skip/Index buttons (:, 9, SKIP/INDEX)

(7) Stop button (∫, STOP)

(8) Top menu and Direct Navigator button

(TOP MENU, DIRECT NAVIGATOR)

(9) Cursor buttons (3, 4, 2, 1)/Frame buttons (2;, ;1)/

Enter button (ENTER)

(10)Sub menu button (SUB MENU)

(11)Manual programming and check button (PROG/CHECK)

(12)Display button (DISPLAY) . . . . . . . . . . . . . . . . . . . . . . . .l 40

(13)VHS recording button (¥, VHS REC) . . . . . . . . . . . .l 51, 61

(14)Recording mode button (REC MODE). . . . . . . . . . . .l 26, 51

(15)Chapter button (CHAPTER)/

Jet rewind button (6 JET REW). . . . . . . . . . . . . . .l 23, 49

(16)DVD erase button (DVD ERASE) . . . . . . . . . . . . . . . . . . .l 23

(17)VHS dubbing button (VHS —, DUBBING). . . . . . . . . . . . .l 60

(18)DVD dubbing button (“ DVD, DUBBING). . . . . . . . . . . . .l 58

(19)DVD recording button (¥, DVD REC) . . . . . . . . . . . .l 26, 59

(20)Add/Delete button (ADD/DLT) . . . . . . . . . . . . . . . . . . . . .l 14

(21)Status display button (STATUS) . . . . . . . . . . . . . . . .l 47, 57

(22)Time slip button (TIME SLIP) . . . . . . . . . . . . . . . . . . .l 23, 25

(23)Return button (RETURN)

(24)Functions (FUNCTIONS)/

VHS menu (VHS MENU) button . . . . . . . . . . . . . . . . .l 47, 56

(25)Pause button (;, PAUSE)

(26)Play button (1, PLAY)

(27)Slow/Search, rewind, forward buttons

(6, 5, SLOW/SEARCH, REW, FF)

(28)CM skip button (CM SKIP) . . . . . . . . . . . . . . . . . . . . . . . .l 22

(29)VCR Plus+ button (VCR Plus+) . . . . . . . . . . . . . . . . .l 28, 52

(30)Audio button (AUDIO). . . . . . . . . . . . . . . . . . . . . .l 23, 27, 57

(31)TRACKING/V-LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 50

/Channel up/down buttons (CH, W, X)

(32)DVD select button (DVD) . . . . . . . . . . . . . . . . . . . . . l above

(33)VHS select button (VHS) . . . . . . . . . . . . . . . . . . . . . l above

(34)TV operation buttons

POWER on/off button (POWER, Í). . . . . . . . . . . . . . . . .l 17

TV/VIDEO input mode select button (TV/VIDEO) . . .l 25, 51

Channel up/down buttons (CH, W, X) . . . . . . . . . . . .l 25, 51

Volume up/down buttons (VOLUME, r, s)

Control reference guide

∫ Remote control

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

POWER

TIME SLIP

CHAPTER

JET REW

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

DVD ERASE

VCR Plus+

OUTPUT

(1)

(34)

(33)

(32)

(31)

(30)

(29)

(28)

(27)

(26)

(25)

(24)

(23)

(22)

(21)

(20)

(18)

(19)

(17)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

(12)

(13)

(14)

(15)

(16)

∫[VHS] and [DVD] button

[DVD]

≥Switch the remote control mode to DVD. Make sure you press

before performing DVD operations. When in DVD mode, the

[DVD] button lights each time you press one of the buttons on

the remote control.

[VHS]

≥Switch the remote control mode to VHS. Make sure you press

before performing VHS operations. When in VHS mode, the

[VHS] button lights each time you press one of the buttons on

the remote control.

When you press this button in the DVD remote control mode,

it is automatically switched to the VHS remote control mode.

When you press this button in the VHS remote control mode,

it is automatically switched to the DVD remote control mode.

PP-Sample.book 6 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

≥Insert so the poles (i and j) match those in the remote control.

≥Do not use rechargeable type batteries.

Do not:

≥mix old and new batteries.

≥use different types at the same time.

≥heat or expose to flame.

≥take apart or short circuit.

≥attempt to recharge alkaline or manganese batteries.

≥use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may

cause a fire.

Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

Note

≥If you cannot operate the unit or TV using the remote control after changing the batteries, please re-enter the codes (l 17).

Aim at the sensor, avoiding obstacles, at a maximum range of

7 m (23 feet) directly in front of the unit.

≥Keep the transmission window and the unit’s sensor free from

dust.

≥Operation can be affected by strong light sources, such as

direct sunlight, and the glass doors on cabinets.

Common to DVD/VHS

[A] DVD/VHS POWER on/off button (Í/I, POWER) . . . . . . . l 13

≥To switch the unit from on to standby mode or vice versa. In

the standby mode, the unit is still consuming a small amount

of power.

[B] Remote control signal sensor. . . . . . . . . . . . . . . . . .l above

[C] S-Video input terminal (S-VIDEO IN) . . . . . . . . . . . . . . . l 62

[D] L2 input terminals (L2). . . . . . . . . . . . . . . . . . . . . . . . . . . l 62

[E] Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 8

[F] One Touch Transfer (Dubbing) operation button

≥From VHS to DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 58

≥From DVD to VHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 60

VHS

(1) VHS Search buttons (V/6, 5/W)

(2) Cassette eject button (<, EJECT) . . . . . . . . . . . . . . . . . l 48

(3) VHS Stop button (∫) . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 49

(4) VHS Play button (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 49

(5) Cassette compartment

(6) VHS Channel up/down buttons (CH, W, X) . . . . . . . . . . l 50

(7) VHS Recording button (¥, REC). . . . . . . . . . . . . . . . . . . l 51

DVD

(1) DVD Skip/Slow/Search buttons (:/6, 5/9)

(2) Disc tray open/close button (<, OPEN/CLOSE) . . . . . .l 20

(3) Disc tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 20

(4) Time slip indicator (TIME SLIP) . . . . . . . . . . . . . . . . . . . .l 25

≥While both recording and play are activated, this indicator

lights up.

(5) DVD Stop button (∫)

(6) DVD Play/t1.3 button (1/t1.3) . . . . . . . . . . . . . . . . . . . .l 21

(7) DVD Channel up/down buttons (CH, W, X)

(8) DVD Recording button (¥, REC) . . . . . . . . . . . . . . . . . . .l 26

∫ Batteries

∫ Use

R6, AA, UM-3

Remote control signal sensor

7 m (23 feet) directly in front of the unit

∫ Main unit

POWER

REC

ᒁ㐿

Í/I

EJECT

OPEN/CLOSE

TIME SLIP

REC

DUBBING

VHS DVD

/k1.3

S-VIDEO IN

VIDEO IN

–

AUDIO IN

–

RL/MONO

VHS DVD

[A] [B] [C]

(2) (3) (4) (5) (6)(1)

(1) (3) (4) (5)

(2)

[D] [E] [F](6)(7)

(7) (8)

∫Off Timer

The unit switches to standby when it is not being used about 6

hours.

You can turn this feature off or change the time to 2 hours.

(l 43, “Off Timer”)

PP-Sample.book 7 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

Common to DVD/VHS

[A] Main display

≥Current time

≥VHS recording and play counter

≥Timer recording start time

≥Miscellaneous messages, etc.

[B] Transfer (Dubbing) direction indicator

[C] Main display

≥Disc play counter

≥Timer recording end time

≥Miscellaneous messages, etc.

VHS

(1) Tape speed indicator (l 51)

≥SP: When recording or playing in Normal mode.

≥LP: When playing in Long play mode.

≥EP: When recording or playing in Extra long play mode.

≥VP: When recording or playing in five-time (Long play) mode.

(2) VHS output indicator

(3) Remaining tape time indicator

(4) Tape operation status

≥The operation status of this unit, such as playback,

fast forward, etc.

(5) Channel

(6) Timer program display ( ) (l 52)

On:

When a timer program is registered and recordable tape is

inserted.

Flashes:

When the unit cannot record the registered program (e.g. there

is no tape, etc.) from 2 minutes before starting a timer program

to the end of the timer program.

(7) Tape indicator

DVD

(1) Disc operation status

(2) Disc type

(3) DVD output indicator

(4) Recording mode (l 27)

≥XP SP LP EP (all on): FR mode (l 27)

(5) Disc indicator

(6) Timer program display ( ) (l 28)

On:

When a timer program is registered and recordable disc is

inserted.

Flashes:

When the unit cannot record the registered program (e.g. there

is no disc, etc.) from 2 minutes before starting a timer program

to the end of the timer program.

(7) Channel position indicator

TRK: track number

GRP: group number

TTL: title number

CHP: chapter number

CH: channel

PL: play list number

Note

≥A half mirror is used for the unit’s display so the display may

occasionally be difficult to see depending on surrounding

conditions.

∫ The unit’s display

PP-Sample.book 8 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

∫Examples of equipment you can connect to this unit’s terminals

∫When the unit is not to be used for a long time

To save power, unplug it from the household AC outlet. This unit

consumes a small amount of power even when it is turned off

(approx. 2 W).

∫Do not connect the unit through a video cassette

recorder

Video signals fed through video cassette recorders will be affected

by copyright protection systems and the picture will not be shown

correctly on the TV.

≥When connecting to a TV with a built in VCR, connect to the input

terminals on the TV side, not the VCR side.

STEP 1 Connection

Amplifier

This unit

From AUDIO OUT terminals or

DIGITAL AUDIO OUT terminal

From AUDIO/VIDEO OUT terminals

To L1 input terminals (rear) To L2 input terminals (front)

CamcorderVideo cassette recorder

Other equipment

Before moving the unit, ensure the disc tray is empty.

Failure to do so will risk severely damaging the disc and the

unit.

Do not place the unit on

amplifiers or equipment

that may become hot.

The heat can damage the unit.

TV TV

This unit

VCR

This unit

PP-Sample.book 9 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

≥The equipment connections described are examples.

≥Before connection, turn off all equipment and read the appropriate operating instructions.

≥Peripheral equipment and optional cables sold separately unless otherwise indicated.

∫75 ≠ coaxial cable

≥The picture and sound signal from this unit does not go through the

75 ≠ coaxial cable to the TV. Make sure you connect one of the

following terminals on this unit to the TV: the AUDIO/VIDEO OUT

terminal, the S-VIDEO OUT terminal or the COMPONENT VIDEO

OUT terminal. If the TV has none of these terminals, consult your

local dealer.

≥Refer to page 11 to if the antenna connector doesn’t match.

∫ Connecting a TV and VCR

RF IN

RF OUT

VHF/UHF

R - AUDIO - L

VIDEO

S-VIDEO

IN 1 (L1)

OPTICAL

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COMPONENT VIDEO OUT

(480P/480I)

YPB PR

R - AUDIO - L

VIDEO

R - AUDIO - L

VIDEO

S-VIDEO

DVD OUT

DVD/VHS COMMON OUT

VHF/UHF

RF IN

VIDEO

OUT

VHF/UHF

RF IN

R L

AUDIO OUT

COMPONENT

VIDEO IN

S VIDEO IN

AUDIO IN

R L

VIDEO IN

2 1

To the

antenna

Outdoor antenna

Cable TV

Indoor antenna

Audio/

Video

cable

Antenna cable

To household AC outlet

Video cassette recorder

Cooling fan

Component

video cable

75 ≠ coaxial cable

(l below)

AC power supply cord

Connect only after all other

connections are complete.

This unit

75 ≠ coaxial cable

Audio/Video cable

Splitter

indicates included accessories.

indicates accessories not included.

are required connections. Connect in the numbered order.

To L1

When making this connection,

ensure you connect the audio

cables to the corresponding

audio input terminals on the TV.

COMPONENT VIDEO OUT terminal

These terminals can be used for either interlace or progressive output

(l 63) and provide a purer picture than the S-VIDEO OUT terminal.

≥Connect to terminals of the same color.

S-Video

cable

S-VIDEO OUT terminal

The S-VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT

terminal. (Actual results depend on the TV.)

Red

White

Yellow

Use a splitter if you also

want to connect the

antenna to your VCR.

PP-Sample.book 10 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

≥You need to subscribe to a cable TV or satellite TV service to enjoy viewing their programming.

≥Consult your service provider regarding appropriate cable TV box or satellite receiver.

≥You can record and view simultaneously scrambled and

unscrambled channels if connections are made as shown in the

diagram below.

¢ For more information on connections (l 10)

Use one of the following connections to suit the antenna lead.

≥If your TV has both lead and coaxial VHF terminals, use the lead

connection to minimize signal loss.

∫A single twin lead

∫A twin lead and a coaxial cable

∫Two twin leads

Use one of the following connections to suit the antenna terminals on

your TV. Refer to the TV’s operating instructions.

∫A twin lead and coaxial plug terminal

∫A twin lead terminal

∫Two twin lead terminals

∫Multiple antenna terminals

≥Connect to one of the ANT terminals, then change the TV’s setting

as necessary.

∫ Connecting a cable TV box/satellite receiver

RF IN

RF OUT

VHF/UHF

R - AUDIO - L

VIDEO

S-VIDEO

IN 1 (L1)

OPTICAL

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COMPONENT VIDEO OUT

(480P/480I)

R - AUDIO - L

VIDEO

R - AUDIO - L

VIDEO

S-VIDEO

DVD OUT

DVD/VHS COMMON OUT

OUT

IN IN

Satellite receiver

75 ≠ coaxial cable

This unit

From antenna or

cable TV jack

Cable TV box

From satellite

dish antenna

Audio/Video cable

To AUDIO/VIDEO IN To VHF/VHF RF IN

RF IN

RF OUT

VHF/UHF

R - AUDIO - L

VIDEO

S-VIDEO

IN 1 (L1)

OPTICAL

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COMPONENT VIDEO OUT

(480P/480I)

R - AUDIO - L

VIDEO

R - AUDIO - L

VIDEO

S-VIDEO

DVD OUT

DVD/VHS COMMON OUT

OUT

OUT2 OUT1

2-way

splitter

Cable TV box

This unit

From cable TV jack

75 ≠ coaxial cable

Audio/Video cable

Cable TV

box

To AUDIO/VIDEO IN To VHF/VHF RF IN

If the antenna connector doesn’t match

∫ Other antenna connections to the unit

300–75 ≠ transformer

from the antenna

(Flat) Twin lead

300 ≠ cable

To this unit’s

RF IN terminal

from the antenna

(Flat) Twin lead 300 ≠ cable

To this unit’s

RF IN terminal(Round)

75 ≠ coaxial cable

VHF/UHF band mixer

from the antenna

To this unit’s

RF IN terminal

300–75 ≠ transformer

(Flat) Twin lead

300 ≠ cable

VHF/UHF band mixer

∫ Other antenna connections from the unit

to the TV

VHF/UHF band separator

75 ≠ coaxial cable

VHF

UHF

75 ≠ coaxial cable

75–300 ≠ transformer

VHF or

UHF

75 ≠ coaxial cable

VHF/UHF band separator

VHF

UHF

ANT 2

ANT 1

Split out

75 ≠ coaxial cable

PP-Sample.book 11 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

Connect an amplifier with a built-in decoder

with these logo marks.

≥Use an optical digital audio cable.

≥Change the settings in “Digital Audio Output” (l 44).

≥You cannot use DTS Digital Surround decoders not suited to DVD.

≥Even if using this connection, output will be only 2 channels when

playing DVD-Audio

This unit has DVD/VHS COMMON output terminals which are

common to both DVD and VHS, and DVD output terminals which are

exclusively used for DVD.

≥For DVD/VHS COMMON output terminals, both DVD and VHS

outputs can be switched.

≥The DVD output terminals can only output the DVD signal.

Preparation

≥Press [DVD].

[1] While stopped

Press [FUNCTIONS]. (l 47)

[2] Select “SETUP” with [3, 4, 2, 1] and press

[ENTER].

[3] Select “Set Up” with [3, 4] and press [2, 1].

[4] Select “DVD/VHS Output” with [3, 4] and press

[ENTER].

[5] Select “Automatic” or “Manual” with [3, 4] and

press [ENTER].

Connecting amplifier or system component

∫ To enjoy multi-channel surround sound on

DVD-Video (digital connection)

OPTICAL

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COMPONENT VIDEO OUT

(480P/480I)

R - AUD

DVD OUT

OPTICAL IN

(1)

(3)

(4)

(5)

(2)

(1) Rear panel of this unit

(2) Insert fully, with this side

facing up. (Do not bend when

connecting.)

(3) Optical digital audio cable

(not supplied)

(4) To optical digital input

(5) Amplifier’s rear panel

Dolby Digital (l 44)

This is a method of coding digital signals developed

by Dolby Laboratories. Not only stereo (2 channel)

audio, these signals can also be 5.1-channel audio.

A large amount of audio information can be

recorded on one disc by this method.

DTS Digital Surround (l 44)

This surround system is used in many movie

theatres around the world. The separation between

channels is good and the compression ratio is low,

so realistic sound effects are possible.

DTS sound tracks are produced with the assumption

that all channels will be used.

∫ Connection to a stereo amplifier

(analog connection)

OPTICAL

ITAL AUDIO OUT

CM/BITSTREAM)

COMPONENT VIDEO OUT

(480P/480I)

R - AUDIO - L

VIDEO

R - AUDIO - L

VIDEO

S-VIDEO

DVD OUT

DVD/VHS COMMON OUT

R L

AUDIO IN

(4)

(5)

(2)

(3)

(1)

(1) Rear panel of this unit

(2) To AUDIO OUT (L/R)

(3) Audio cable (not supplied)

A Red (R)

B White (L)

(4) Audio input (L/R)

(5) Amplifier’s rear panel

DVD output and DVD/VHS output

≥Even if “Automatic” is selected in “DVD/VHS Output” on

“Set Up” Menu (l 43), the desired output may not be selected

depending on the operation. In this case, press [DVD/VHS

OUTPUT] on the remote controller to switch manually.

≥When the Video is switched from DVD to VHS or vice versa,

the audio volume may suddenly increase or decrease. This is

because when the audio output of this unit is connected to the

TV or other, the audio output of the DVD is generally lower.

When you increase the volume level of the TV or the amplifier

to play back DVD audio, reduce it when playback is finished.

R - AUDIO

OPTICAL

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COMPONENT VIDEO OUT

(480P/480I)

YPB PR

R - AUDIO - L

VIDEO

S-VIDEO

DVD OUT

R - AUDIO - L

VIDEO

DVD/VHS COMMON OUT

DVD/VHS COMMON output

DVD output

PP-Sample.book 12 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

After plugging the unit into your household AC outlet and pressing

[Í, DVD/VHS POWER] to turn the unit on for the first time, the unit

assists you to set the on-screen language, and automatically tunes in

all the channels it can receive and sets the clock.

The unit automatically determines the type of transmission (airwaves

or cable) and puts them into channels as follows.

Preparation

≥Turn on the TV and select the appropriate video input to suit the

connections to this unit.

≥If you connect the unit through a cable TV box or satellite receiver

(l 11), tune to your local PBS for “Auto Clock Setting” to work.

If there is no local PBS, set the clock manually (l 46, “Manual

Clock Setting”).

≥Press [DVD].

[1] Press [Í, DVD/VHS POWER].

[2] Use [3, 4] to select the language and press

[ENTER].

[3] Press [ENTER] to start Plug-in Auto Tuning.

The unit then proceeds with Auto Clock Setting. The time is

displayed when finished.

≥DST, Daylight Saving Time, shows the summertime setting.

≥TIME ZONE shows the time difference from Greenwich mean

time (GMT).

EST (Eastern Standard Time) l GMT j5

CST (Central Standard Time) l GMT j6

MST (Mountain Standard Time) l GMT j7

PST (Pacific Standard Time) l GMT j8

AST (Alaska Standard Time) l GMT j9

HST (Hawaii Standard Time) l GMT j10

For other areas: xx hr

[4] Press [ENTER].

∫If the clock is an hour slower or faster than the actual

time

Select “j1” or “i1” in “Time Zone Adjust” in the SETUP menu

(l 46).

∫If the unit couldn’t set the clock automatically

Set the time manually (l 46, “Manual Clock Setting”).

∫To start Plug-in Auto Tuning again (after relocation, for

example)

When the unit is on and stopped

[1] Press and hold [CH, W] and [CH, X] on DVD of the main unit for

about 5 seconds.

The unit turns off.

[2] Press [Í, DVD/VHS POWER] to turn the unit on.

STEP 2 Plug-in Auto Tuning

Band Channel

TV Mode

(Airwaves)

VHF 2–13

UHF 14–69

CATV Mode

(Cable)

VHF 2–13

CATV LOW BAND 95–99

CATV MID/SUPER BAND 14–36

CATV HYPER BAND 37–65

ULTRA BAND

66–94

100–125

SPECIAL CATV CHANNEL 1

3, 4, 2, 1

ENTER

DVD

FUNCTIONS

OUTPUT

POWER

VOLUME

INPUT SELECT

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

DVD/VHS POWER

OUTPUT

PLAY

PROG/CHECK

TIME SLIP

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

STATUSDISPLAY

SUB MENU

English

Español

Français

Press ENTER

Pulse ENTER

Appuyer sur ENTER

Select Language

Seleccione la Lengua

Sélection de Langue

Antenna system, channel caption, and guide channel

settings for VCR Plusi system all revert to the default

values when you perform the procedure below. Timer

recording settings are also cleared.

Auto Channel Setting

CH.

Auto Channel Setting

Proceeding . . .

1 1 1

Auto Clock Setting

Auto Clock Setting is complete.

4/4/2004 12:15 AM

DST............. ON

TIME ZONE.... CST

PP-Sample.book 13 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

Preparation

≥Press [DVD].

[1]

While stopped

Press [FUNCTIONS]. (l 47)

[2] Select “SETUP” with [3, 4, 2, 1] and press

[ENTER].

[3] Select “Channel” with [3, 4] and press [2, 1].

[4] Select “Antenna System” with [3, 4] and press

[ENTER].

[5] Select “TV” or “CATV” with [3, 4] and press

[ENTER].

[6] Select “Auto Channel Setting” with [3, 4] and

press [ENTER].

[7] Press [ENTER].

Auto Channel Setting starts. This takes a few minutes.

[8] Press [ENTER].

∫To cancel partway

Press [RETURN].

∫When you are finished

Press [RETURN].

Add or delete channels if necessary channels are not set or

unnecessary channels are set.

[1] Press the numeric buttons to select a channel.

TV Mode (Airwaves)

e.g., “5”: [0] )[5]

“15”: [1] )[5]

CATV Mode (Cable)

e.g., “5”: [0] )[0] )[5]

“15”: [0] )[1] )[5]

“115”: [1] )[1] )[5]

≥You can also use [CH, W, X] when you are going to delete a

channel.

[2] Press [ADD/DLT].

e.g., the channel is deleted.

∫ If Plug-in Auto Tuning fails

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

TIME SLIP

CHAPTER

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

STATUSDISPLAY

SUB MENU

DVD ERASE

SKIP/INDEX

SLOW/

REW

PLAY

POWER

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

DVD/VHS POWER

VCR Plus+

OUTPUT

3, 4, 2, 1

ENTER

DVD

FUNCTIONS

RETURN

ADD/DLT

CH, W, X

Numeric

Buttons

Manual Channel Captions

VCR Plusi CH Setting

Antenna System

Channel

Set Up

Disc

Video

Audio

Display

TV Screen

Auto Channel Setting

Channel Captions

Preset Channel Captions

CATV

SETUP

Channel

Set Up

CATV

Antenna System

SETUP

∫ Adding and deleting channels

Unit’s display

CHANNEL 15 DELETED

PP-Sample.book 14 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

Set these guide channels so you can use VCR Plusi system for

timer recording. Before starting the settings, prepare a chart showing

the channels, station names, and guide channels.

e.g.,

° Look up the guide channels for the stations in magazines.

°° Write down all the stations you can receive.

≥If you have connected a cable TV box or satellite receiver, the

VCR Plus_ system does not work so you do not have to set the

guide channels.

Preparation

≥Press [DVD].

[1] While stopped

Press [FUNCTIONS]. (l 47)

[2] Select “SETUP” with [3, 4, 2, 1] and press

[ENTER].

[3] Select “Channel” with [3, 4] and press [2, 1].

[4] Select “VCR Plusr CH Setting” with [3, 4] and

press [ENTER].

e.g., “Antenna System” is set to “CATV”.

[5] Use [3, 4] to select the guide channel you want

to set and press [1].

≥When selecting the guide channel, press and hold [3, 4] to

scroll up and down the screen.

[6] Use [3, 4] to select the channel corresponding

to the guide channel and press [2].

≥To delete a number, press [CANCEL/RESET, ¢].

≥Repeat steps 5 and 6 to enter other channels.

[7] Press [ENTER].

∫To return to the previous screen

Press [RETURN].

∫When you are finished

Press [RETURN].

STEP 3 Channel settings

∫ Guide channel settings for VCR Plusi

system

Station name

Guide

channel°

Channel

number°°

Channel setting

CBS 04 04 Unnecessary

HBO 33 15

Enter channel 15 next to

Guide Channel 33.

Nickelodeon 38 20

Enter channel 20 next to

Guide Channel 38.

Manual Channel Captions

VCR Plusi CH Setting

Antenna System

Channel

Set Up

Disc

Video

Audio

Display

TV Screen

Auto Channel Setting

Channel Captions

Preset Channel Captions

CATV

SETUP

Channel

Set Up

Disc

Video

Audio

Display

TV Screen

VCR Plusi CH Setting

Guide Channel CATV Channel

---

125

---

SETUP

Channel

Set Up

Disc

Video

Audio

Display

TV Screen

VCR Plusi CH Setting

Guide Channel CATV Channel

---

SETUP

PP-Sample.book 15 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

You can use the preset captions, or manually enter new ones

yourself.

The captions you enter are displayed when the channel is displayed

and in the Direct Navigator screen.

Preparation

≥Press [DVD].

[1] While stopped

Press [FUNCTIONS]. (l 47)

[2] Select “SETUP” with [3, 4, 2, 1] and press

[ENTER].

[3] Select “Channel” with [3, 4] and press [2, 1].

[4] Select “Preset Channel Captions” with [3, 4]

and press [ENTER].

[5] Use [3, 4] to select the caption and press [1].

You can choose from the following captions.

ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E, AMC,

FAM, MAX, MTV, SHOW, TBS, USA, TNT, CBC, UPN, CTV,

WB, TSN, DSC, GLOB

≥When selecting the caption, press and hold [3, 4] to scroll up

and down the screen.

[6] Use [3, 4] to select the channel corresponding

to the caption and press [2].

≥Channels are only displayed if they contain a station and if

captions have not been added manually.

≥To delete the channel number, press [CANCEL/RESET, ¢].

≥Repeat steps 5 and 6 as necessary.

[7] Press [ENTER].

[4] Select “Manual Channel Captions” with [3, 4]

and press [ENTER].

[5] Use [3, 4] to select the channel and press [1].

≥Channels are only displayed if they contain a station and if

preset captions have not been added.

[6] Use [3, 4] to select the first character and

press [1].

≥You can choose from the following characters:

A–Z, 0–9, -, &, !, /, (space)

≥To delete the caption, press [CANCEL/RESET, ¢].

≥Repeat this step to enter the other characters.

[7] Use [2, 1] to return to the “Channel Number”

column.

≥Repeat steps 5–7 to enter other channels.

[8] Press [ENTER].

∫ Channel captions

PLAY

PROG/CHECK

TIME SLIP

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

STATUSDISPLAY

SUB MENU

SKIP/INDEX

SLOW/

REW

PLAY

POWER

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

DVD/VHS POWER

VCR Plus+

OUTPUT

3, 4, 2, 1

ENTER

TV, Í

DVD

FUNCTIONS

RETURN

Numeric

Buttons

Manual Channel Captions

VCR Plusi CH Setting

Antenna System

Channel

Set Up

Disc

Video

Audio

Display

TV Screen

Auto Channel Setting

Channel Captions

Preset Channel Captions

CATV

SETUP

1 Preset Channel Captions

Channel

Set Up

Disc

Video

Audio

Display

TV Screen

Preset Captions

Caption Channel Number

---

GLOB

ABC

---

PBS

CBS

SETUP

1 Manual Channel Captions

∫To return to the previous screen

Press [RETURN].

∫When you are finished

Press [RETURN].

Channel

Set Up

Disc

Video

Audio

Display

TV Screen

Manual Captions

Channel Number Caption

AAAA

---

SETUP

PP-Sample.book 16 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

You do not have to change the setting when connected to a 4:3

standard aspect TV that is not compatible with progressive output.

(l 63)

Preparation

≥Press [DVD].

[1] While stopped

Press [FUNCTIONS]. (l 47)

[2] Select “SETUP” with [3, 4, 2, 1] and press

[ENTER].

[3] Select “TV Screen” with [3, 4] and press

[2, 1].

[4] Select “TV Type” with [3, 4] and press

[ENTER].

≥Aspect 4:3/Aspect 16:9:

≥480P/480I:

Select “480P” if the TV is compatible with progressive output.

[5] Use [3, 4] to select the item and press

[ENTER].

You can configure the remote control TV operation buttons to turn

the TV on/off, change the TV input mode, select the TV channel and

change the TV volume.

Point the remote control at the TV

While pressing [Í POWER TV], enter the code

using the numeric buttons.

e.g., 01: press [0] ) [1].

Manufacturer and Code No.

Test by turning on the TV and changing channels. Repeat the

procedure until you find the code that allows correct operation.

≥If your TV brand is not listed or if the code listed for your TV does

not allow control of your TV, this remote control is not compatible

with your TV.

Change the remote control code on the main unit and on the remote

control (the two must match) if you place other Panasonic products

close together.

Use “1”, the factory set code, under normal circumstances.

Preparation

≥Press [DVD].

[1] While stopped

Press [FUNCTIONS]. (l 47)

[2] Select “SETUP” with [3, 4, 2, 1] and press

[ENTER].

[3] Select “Set Up” with [3, 4] and press [2, 1].

[4] Select “Remote Control Code” with [3, 4] and

press [ENTER].

[5] Use [3, 4] to select the code (1, 2, or 3) and

press [ENTER].

The code on the unit has been set.

[6] While pressing [ENTER], press and hold for

about 2 seconds the numeric button ([1], [2] or

[3]) corresponding to the code you selected in

step 5.

The code on the remote control has been set.

[7] Press [ENTER].

∫When the following indicator appears on the unit’s

display

The unit’s remote control code

Change the code on the remote control to match the main unit’s

(l step 6).

STEP 4 Set up to match your TV and remote control

∫ Selecting TV type

∫ TV operation

Panasonic

National

QUASAR

01, 02

PHILIPS (RC-5) 03

RCA 05

SAMSUNG 14, 18, 19

FISHER 10 SANYO 10

GE 05 SHARP 06, 07

GOLDSTAR 15, 16, 17 SONY 08

HITACHI 12 SYLVANIA 03

JVC 11 THOMSON 05

LG 15, 16, 17 TOSHIBA 09

MAGNAVOX 03 ZENITH 04

MITSUBISHI 13

Aspect 4:3 & 480I

Channel

Set Up

Disc

Video

Audio

Display

TV Screen

Aspect 4:3 & 480P

Aspect 16:9 & 480I

Aspect 16:9 & 480P

TV Type

SETUP

4:3

16:9

4:3 standard aspect TV 16:9 widescreen TV

∫ When other Panasonic products respond

to this remote control

∫To return to the previous screen

Press [RETURN].

∫When you are finished

Press [RETURN].

PP-Sample.book 17 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

[[DVD]]

≥On DVD-Audio, DVD-Video and Video CD, the producer of the material can control how these discs are played. This means that you may

not be able to control play of a disc with some operations described in these operating instructions. Read the disc’s information for details.

The features you can use with the different types of disc are as follows.

° Possible operations (≤: enable t: disable)

°° The remaining capacity of the disc will not be increased even if erased.

DVD-RAM

≥This unit is compatible with the Content Protection for Recordable

Media (CPRM) system so you can record broadcasts that allow

one copy, such as some CATV broadcasts, onto 4.7 GB/9.4 GB

DVD-RAM (these are CPRM compatible). It is not possible to

record onto DVD-R or 2.8 GB DVD-RAM.

≥DVD-RAMs recorded on this unit cannot be played on incompatible

players.

≥We recommend using Panasonic’s DVD-RAM, which has

confirmed compatibility with this unit.

≥The aspect ratio of the recorded images will be the same as that of

the originals.

∫Protection of cartridge disc

You can protect the contents of your discs.

≥With the write-protect tab in the protect

position, you cannot record to, edit, or erase

from the disc.

DVD-R

≥You can play DVD-R on compatible DVD players by finalizing it on

this unit.

≥The aspect ratio of the recorded images will be 4:3.

≥DVD-R can be recorded only in either of these audio types (Main or

SAP). Select the desired audio type in “Select MTS” (l 44).

≥Some broadcasts carry signals that allow you to copy once, but you

cannot record them with DVD-R. Use DVD-RAM to record these

kinds of broadcast.

≥Before finalizing, erasing titles will not increase the disc’s available

time.

≥After finalizing, these DVD-R can no longer be recorded on or

edited.

≥This unit may not be able to play back DVD-Rs other than

Panasonic’s product depending on the recording condition. We

recommend using Panasonic’s DVD-R, which has confirmed

compatibility with this unit.

≥DVD-R recorded by this unit cannot be reproduced by other

Panasonic DVD recorders in some cases.

Discs

∫ Discs you can use

Disc type Logo

Indication in

these

instructions

Possible operations°

Features

A B C D E

DVD-RAM

4.7 GB / 9.4 GB, 12 cm (5z)

2.8 GB 8 cm (3z)

[RAM] ≤≤≤≤≤

This disc is able to be rewritten and edited. There are

2 types of DVD-RAM, single-sided and double-sided.

The capacity of the double-sided disc is 9.4 GB.

(l below)

DVD-R

4.7 GB 12 cm (5z), 1.4 GB 8 cm (3z)

for General Ver.2.0

4.7 GB 12 cm (5z)

for General Ver.2.0/4k-SPEED

DVD-R Revision 1.0

[DVD-R]

Not finalized

≤≤≤°°t t

This is a recordable disc with high compatibility and

storage stability. (You cannot rewrite it.) This unit is

capable of recording DVD-R from 1k speed to

4k speed. (l below)

[DVD-V]

Finalized

t≤ttt

DVD-Audio

(Play is in stereo only.)

[DVD-A] t≤tt≤

This is a disc for music with high sound quality.

≥In this unit, it is played with 2 channels (stereo).

DVD-Video [DVD-V] t≤tt≤

This is marketed software with high picture

quality which already includes movies or

music.

≥This unit can play discs with symbols

(region number) shown on the right.

Video CD [VCD] t≤tt≤

This is marketed software which already includes

music or video.

Audio CD

(Including discs recorded with

MP3.)

[CD] t≤ttt

This is marketed software which already includes

music or audio. This can be a CD-R or a CD-RW

including music recorded in MP3 compression

technology.

≥This unit can play finalized CD-R/CD-RW (audio

recording disc) recorded in CD-DA (digital audio),

Video CD or MP3 format. Some CD-R or CD-RW

may not be played due to the condition of the

recording.

– [MP3] t≤ttt

ARecording BPlayback CTitle erase/Entering text DCreating play lists ESelecting audio

Visit Panasonic’s homepage for more information about DVDs. http://www.panasonic.com/playDVD-R

∫ More about DVD-RAM and DVD-R

ALL

PROTECT

DVD

PP-Sample.book 18 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

≥2.6 and 5.2 GB DVD-RAM, 12 cm (5z)

≥3.95 and 4.7 GB DVD-R for Authoring

≥Unfinalized DVD-R recorded on other equipment

≥PAL discs (you can still play the audio on DVD-Audio)

≥DVD-Video with a region number other than “1” or “ALL”,

DVD-ROM, DVD-RW, iR, iRW, CD-ROM, CDV, CD-G, Photo CD,

CVD, SVCD, SACD, MV-Disc, PD, Divx Video Disc, etc.

The precision parts in this unit are readily affected by the

environment, especially temperature, humidity, and dust.

Cigarette smoke also can cause malfunction or breakdown.

To clean this unit, wipe with a soft, dry cloth.

≥Never use alcohol, paint thinner or benzine to clean this unit.

≥Before using chemically treated cloth, read the instructions for the

cloth carefully.

Observe the following points to ensure continued listening and

viewing pleasure.

Dust and dirt may adhere to the unit’s lenses over time, possibly

making it impossible to record or play discs.

Use the recommended DVD-RAM/PD Lens cleaner

(LF-K123LCA1) about once every year, depending on frequency of

use and the operating environment.

Read the lens cleaner’s instructions carefully before use.

∫How to hold a disc

Do not touch the recorded surface.

∫If there is dirt or condensation on the disc

[RAM] [DVD-R]

≥Clean with an optional DVD-RAM/PD Disc cleaner (LF-K200DCA1,

where available).

≥Do not use cleaners for CDs or cloths.

[DVD-A] [DVD-V] [VCD] [CD]

Wipe with a damp cloth and then wipe dry.

∫Handling precautions

≥Do not attach labels or stickers to discs. (This may cause disc

warping and un-balanced rotation, rendering it unusable.)

≥Do not write on the label side with a ball-point pen or other writing

instrument.

≥Do not use record cleaning sprays, benzine, thinner, static

electricity prevention liquids or any other solvent.

≥Do not use scratch-proof protectors or covers.

≥Do not use the following discs:

Disc with exposed adhesive from removed stickers or labels

(rented discs, etc.).

Discs that are badly warped or cracked.

Irregularly shaped discs, such as heart shapes.

≥Do not place in the following areas:

In direct sunlight.

In very dusty or humid areas.

Near a heater.

Discs that cannot be played

Maintenance

Disc handling

DVD

PP-Sample.book 19 ページ２００４年３月８日　月曜日　午後６時３分

Before Use

[1] Press [<, OPEN/CLOSE] on the main unit to

open the tray.

You can insert a cartridge or non-cartridge disc.

[2] Press [<, OPEN/CLOSE] on the main unit to

close the tray.

≥If you insert a DVD-RAM with the write-protect tab set to

“PROTECT” (l 18), play starts automatically.

Note

≥Load double-sided discs so the label for the side you want to

record/play is facing up.

≥It is not possible to record continuously from one side of a double

sided disc to the other. You will need to eject the disc and turn it

over.

≥When using 8 cm (3q) DVD-RAM, remove the disc from the

cartridge and insert it, making sure you align it with the groove.

Inserting discs

(2)

(3)

(1)

Non-cartridge disc

Cartridge disc

(1) Insert label-up.

(2) Insert inside the tray’s guides.

(3) Insert label-up with the arrow facing in.

DVD

PP-Sample.book 20 ページ２００４年３月８日　月曜日　午後６時３分

Playback

[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]

[1] Press [Í, DVD/VHS POWER] to turn the unit on.

[2] Insert a disc.

(l 20)

[3] Press [1, PLAY].

The disc tray closes and play begins.

(The unit takes some time to read the disc before play starts.)

≥Playback starts from the most recently recorded title.

[RAM] [DVD-R]

≥Playback starts from the beginning of the disc.

[DVD-A] [DVD-V] [VCD] [CD] [MP3]

∫To stop play

Press [∫, STOP]. (l right, “Resume

Function”)

≥A screen similar to the one on the right

may appear when you stop play. Press

[∫, STOP] again and you can use this

unit’s tuner to watch TV. [DVD-A] [DVD-V]

[VCD] [CD] [MP3]

∫To pause play

Press [;, PAUSE]. (Press again to restart play.)

[DVD-A] [DVD-V] [VCD]

[VCD]

Press the numeric buttons to select an item.

e.g.: “5”: [0] )[5]

“15”: [1] )[5]

[DVD-A] [DVD-V]

Press [3, 4, 2, 1] to select an item and press [ENTER].

≥You can also use the numeric buttons to select an item.

Other buttons used to operate menus

Read the disc’s instructions for further details about operation.

Note

≥If “ ” appears on the TV, the operation is prohibited by the unit or

disc.

[RAM] (Only with Dolby Digital)

The play speed can be increased

without distorting the audio.

During Play

Press and hold [1, PLAY].

∫To return to normal speed

Press [1, PLAY].

Note

≥Output is in PCM when using a digital connection (l 12).

≥This is cancelled when you perform skip, pause, or when play

reaches a point where a program recorded in sound other than

Dolby Digital starts.

≥This does not work if the setting is “Off” in “Search Audio & PLAY

t1.3” (l 44).

≥This does not work when recording is in XP or FR mode during

simultaneous recording and play (l 25). [RAM]

[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]

[1] During play

Press [∫, STOP].

≥“PB” flashes on the unit’s display (Normal play only). The unit

memorizes the position.

[2] Press [1, PLAY].

≥Play starts from where you stopped it.

∫To cancel the resume function (Normal play only)

Press [∫, STOP] while the unit remembers the

position.

(The position is also cleared when you turn the

unit off.)

Playing discs

Preparation

≥Press [DVD].

;

∫

3, 4, 2, 1

ENTER

DVD

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

POWER

TIME SLIP

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

VCR Plus+

OUTPUT

Numeric

Buttons

∫ When a menu screen appears on the TV

Quick View (Play t1.3)

Starting play from where you stopped it

(Resume Function)

PLAY

DVD-RAM

PLAY x1.3

DVD-RAM

e.g.: Normal play

DVD

PP-Sample.book 21 ページ２００４年３月８日　月曜日　午後６時３分

Playback

[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]

During play

Press [6, SLOW/SEARCH] or [5,

SLOW/SEARCH].

≥On the main unit, press and hold [:/6] or [5/9].

≥There are 5 search speeds. Each press increases the search

speed.

≥Press [1, PLAY] to restart playback.

≥Sound is output only in the first level of fast forward. In the case of

DVD-A (except moving picture parts), CD and MP3, it is output in

all levels.

≥You can turn this sound off if you want to (l 44, “Audio”—“Search

Audio & PLAY t1.3”).

[RAM] [DVD-R] [DVD-A] (Motion picture parts only) [DVD-V] [VCD]

While paused

Press [6, SLOW/SEARCH] or [5, SLOW/

SEARCH].

≥On the main unit, press and hold [:/6] or [5/9].

≥When slow motion play is continued for about 5 minutes it pauses

automatically.

≥The speed increases up to 5 steps.

≥Press [1, PLAY] to restart playback.

≥Forward direction ([5], [5/9]) only. [VCD]

[RAM] [DVD-R] [DVD-A] (Motion picture parts only) [DVD-V] [VCD]

While paused

Press [2;], [;1], [2] or [1].

≥Each press shows the next or previous frame.

≥Press [1, PLAY] to restart playback.

≥Forward direction ([;1], [1]) only. [VCD]

[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]

During play or while paused

Press [:, SKIP] or [9, SKIP].

≥On the main unit, press [:/6] or [5/9].

≥Each press increases the number of skips.

[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]

Starting play from a selected title, chapter or track.

During play

Press the numeric buttons to select the item.

e.g.: “5”: [0] )[5] [MP3] “5”: [0] )[0] )[5]

“15”: [1] )[5] “15”: [0] )[1] )[5]

[DVD-A]

A group number can be specified while the

screen saver is displayed.

e.g.: “5”: [5]

≥This works only when stopped (screen

saver is displayed) with some discs.

≥Playing bonus groups

Some discs contain bonus groups. If a

password screen appears after selecting a group, enter the

password with the numeric buttons and press [ENTER]. Refer also

to the disc’s jacket.

[RAM] [DVD-R]

You can skip approximately 1 minute with one press.

During play

Press [CM SKIP].

Preparation

≥Press [DVD].

Fast forward and rewind—SEARCH

Slow-motion play

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

POWER

TIME SLIP

CHAPTER

JET REW

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

DVD ERASE

VCR Plus+

OUTPUT

2, 1

2;, ;1

ENTER

DVD

AUDIO

CM SKIP

TIME SLIP

CHAPTER

DVD ERASE

6, 5

:, 9

Numeric

Buttons

L R

DVD-RAM

••••

Frame-by-frame viewing

Skipping

Direct Play

CM Skip

Screen saver

DVD

PP-Sample.book 22 ページ２００４年３月８日　月曜日　午後６時３分

Playback

[RAM] [DVD-R]

Skips the specified time.

Displays the TV image being received as a picture-in-picture.

[1] During play

Press [TIME SLIP]. (Press again to cancel.)

≥You will hear the playback audio.

≥The blue background does not appear on the receiving screen

even if you select “On” from “Blue Background” in the SETUP

menu (l 45).

[2] Press [3, 4] to enter the time and press

[ENTER].

≥The time indicator will go off after about 5 seconds, but will turn

on again when you set the indicator.

≥Play skips the amount of time you entered.

≥Press to alter in 1-minute units. Press and hold to alter in

10-minute units.

(1)Play images

(2)Current receiving images

≥You can change the channel being received by pressing

[CH, W, X].

≥You cannot change the channel being received while

recording.

∫To show the play images in full

Press [TIME SLIP].

[RAM] [DVD-R]

You can erase titles while playing.

≥A title cannot be restored once it is erased. Make certain before

proceeding.

[1] During play

Press

[DVD ERASE].

[2] Select “Erase”

with [2] and

press [ENTER].

For your reference

≥It is not possible to erase a title when you are carrying out

simultaneous recording and play (l 25). [RAM]

≥It is not possible to erase a title that is in the process of being

recorded.

≥The available recording time on DVD-R does not increase when

you erase titles.

[RAM]

[1] During play

Press [CHAPTER].

≥Press [:, SKIP] or [9, SKIP] to skip to the start of a

chapter.

≥You cannot activate this function when recording and playing at

the same time.

[RAM] [DVD-A] [DVD-V] [VCD]

You can change the audio being played.

Press [AUDIO] to select the audio type.

[RAM] [VCD] (l 47)

LR#L#R

^--------------}

≥When playing an SAP

broadcast recorded in

DVD-RAM:

MAIN ()SAP

[DVD-A] [DVD-V] (l 40)

You can change the audio channel number by pressing [AUDIO].

This allows you to change items like the sound track language.

e.g.: [DVD-V] English is the selected language.

Note

If you cannot change the audio type when you have used only an

optical digital cable for connection, set “Dolby Digital” to “PCM”

(l 44). Alternatively, you may connect to an amplifier with an Audio/

Video cable and change the input on the amplifier to suit the

connection.

Displaying the TV image as a picture-in-

picture/

Selecting an amount of time to skip—

Time Slip

Erasing a title that is being played

0 min

–5 min

(1)

(2)

PLAY

CH8

PLAY

CH8

Erase

Erase Cancel

0 : 58(SP)

Corresponding play list chapters will be erased.

Time remaining after erase

Create chapters

Changing audio during play

PLAY

L R

DVD-RAM

e.g.: [RAM]

“L R” is selected

Sound track

1 ENG Î Digital 3/2.1ch

DVD

PP-Sample.book 23 ページ２００４年３月８日　月曜日　午後６時３分

Playback

[MP3]

This unit plays MP3 files recorded on CD-R/RW designed for audio

recording that are finalized (l 63) on a computer. Files are treated

as tracks and folders are treated as groups.

[1] During stop or play

Press [TOP MENU].

≥The file list appears.

[2] Press [3, 4] to select the track and press

[ENTER].

Play continues to the last track in the last group.

≥“ ” indicates the track currently playing.

≥You can also directly select the track with the numeric buttons.

e.g.: The track “006.mp3” of Group “002” in the illustration on

the right,

“6”: [0] )[0] )[6]

The track “010.mp3” of Group “003” in the illustration on

the right,

“10”: [0] )[1] )[0]

∫To show other pages

Select “2 Prev.” or “Next 1” with [3, 4, 2, 1] and press [ENTER].

≥After listing all the tracks in one group, the list for the next group

appears.

∫To exit the file list

Press [TOP MENU] or [RETURN].

[1] While the file list is displayed

Press [1] while a track is highlighted to display

the tree screen.

≥A folder which has no MP3 files is indicated in black. You

cannot select groups with no MP3 files.

[2] Press [3, 4] to select a group and press

[ENTER].

≥The file list for the group appears.

For your reference

≥Press [2, 1] to jump layers in the tree screen.

∫To return to the file list

Press [RETURN].

∫Tips for making MP3 discs

≥Discs must conform to ISO9660 level 1 or 2 (except for extended

formats).

≥Compatible compression rate: from 32 kbps to 320 kbps

≥Compatible sampling rate:16 kHz, 22.05 kHz, 24 kHz, 32 kHz,

44.1 kHz, 48 kHz

≥Maximum number of tracks and groups recognizable: 999 tracks

and 99 groups

≥This unit is compatible with multi-session.

≥This unit is not compatible with ID3 tags or packet writing.

≥Depending on recording, some items may not be playable.

≥Reading or play of the disc may take time if there are a lot of still

pictures or sessions.

≥The display order may differ from how the order is displayed on a

computer.

∫Naming folders and files

At the time of recording, give folder and file names a 3-digit numeric

prefix in the order you want them to play (this may not work at times).

≥MP3 files must have the extension “.MP3” or “.mp3”.

≥English alphabet and Arabic numerals are displayed properly.

Other characters may not be displayed properly.

Preparation

≥Press [DVD].

Using menus to play MP3 discs

DVD

RETURN

TIME SLIP

TV/VIDEO

DIRECT NAVIGATOR

TOP MENU

∫

3, 4, 2, 1

ENTER

CH, W, X

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

POWER

TIME SLIP

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

VCR Plus+

OUTPUT

Numeric

Buttons

0 – 9

No.

No. GROUP

TOTAL TRACK TREE

001 Both Ends Freezing

: MP3_MUSIC

Prev. Next

G 1

T 1

TOTAL

1/ 24

The Group Number

Track Number in the Group

TOTAL:

Selected Track Number/

Total Track Number

Selected Group No. and Name

∫ Using the tree screen to find a group

0 – 9

No.

G 1

T 1

TOTAL

1/ 24

MP3_MUSIC

001 My favorite

001 Brazillian pops

002 Chinese pops

003 Czech pops

004 PC Files

005 Japanese pops

006 Swedish pops

001 Momoko

002 Standard Number

001 Piano solo

002 Vocal

G 1/ 15

TREE

Selected Group Number/Total

Group Number

≥If the group has no track, “– –”

is displayed as group number.

002

001001

008.mp3

009.mp3

010.mp3

003

001.mp3

002.mp3

003.mp3

004.mp3

005.mp3

006.mp3

007.mp3

Folder = Group

Track total = Total

File = Track

DVD

PP-Sample.book 24 ページ２００４年３月８日　月曜日　午後６時３分

Recording

[RAM]

Preparation

≥Press [DVD].

Hint

≥Sound is not output while fast-forwarding.

You can start play from the beginning of the title while continuing to

record it.

While recording or timer recording

Press [1, PLAY].

Time Slip indicator on the main unit lights.

For your reference

≥Play cannot be started until at least 2 seconds after recording

starts.

You can start play of the title you are recording or play a title

previously recorded.

While recording or timer recording

[1] Press [DIRECT NAVIGATOR].

[2] Use [3, 4, 2, 1] to select a title and press

[ENTER].

≥Time Slip indicator on the main unit lights.

∫To exit the Direct Navigator screen

Press [DIRECT NAVIGATOR].

For your reference

≥During simultaneous recording and play, you cannot edit or erase

with the Direct Navigator or play lists.

≥If you start play while the unit is on standby for timer recording,

recording starts when the time you set is reached.

You can play the title being recorded to check that it is being

recorded correctly. You can also check parts that were recorded

previously.

While recording or timer recording

[1] Press [TIME SLIP].

Time Slip indicator on the

main unit lights. Play

starts from 30 seconds

previous to that moment.

What is currently being

recorded appears as a

picture-in-picture and you

will hear the playback

audio.

(1) Play images

(30 seconds before)

(2) Current recording

[2] Press [3, 4] to

select the time

and press

[ENTER].

≥The time indicator will go

off after about

5 seconds, but will turn

on again when you set

the indicator.

≥Press [3, 4] to alter in

1-minute units. Press

and hold [3, 4] to alter in 10-minute units.

∫To show the play images in full

Press [TIME SLIP].

≥Press [TIME SLIP] to return to the picture-in-picture screen.

For your reference

≥The image on the small screen may be distorted or flicker

depending on the scene. However, this does not affect the image

recorded.

[1] Press [TV/VIDEO] to change the input mode to

“TV”.

[2] Press TV’s [CH, W, X] to select the desired TV

channel.

For your reference

≥You can also do this if the unit is making a timer recording.

≥The recording is unaffected.

Playing while you are recording

∫ Chasing play

∫ Simultaneous recording and play

- -

DIRECT NAVIGATOR TITLE VIEW

DVD-RAM

- -- -- -

0807

10 10/25 MON 8 10/25 MON 8 10/26 TUE

e.g.:

You want to watch the

movie you recorded

yesterday (title 08)

while recording sport

(title 09).

Title 08 is played back

while title 09 is being

recorded.

¥: Currently recording

Selecting title 08

∫ TIME SLIP

∫To stop play and recording

[1] Press [∫, STOP]. Play stops.

(Wait 2 or more seconds)

[2] Press [∫, STOP]. Recording stops.

≥You cannot stop recording with [∫, STOP] during timer

recording. To stop timer recording, press [∫, STOP], then

[ENTER] within 5 seconds.

- You can also press and hold [∫] on the main unit for more

than 3 seconds to stop timer recording.

Watching the TV while recording

PLAY

0 min

REC

(2)

(1)

PLAY

–5 min

REC

DVD

PP-Sample.book 25 ページ２００４年３月８日　月曜日　午後６時３分

Recording

[RAM] [DVD-R]

≥You can record up to 99 titles on a disc.

≥DVD-RAM/DVD-R have limitations on recording (l 18).

≥Recording will take place on open space on the disc. Data will not

be overwritten.

≥If there is no space left on the recording disc, you will need to erase

unwanted titles (l 23, 33) or use a new disc.

Preparation

≥Release protection (disc l 30, cartridge l 18). [RAM]

≥Press [DVD].

[1] Press [Í, DVD/VHS POWER] to turn the unit on.

[2] Insert a disc.

(l 20)

≥When using a DVD-RAM for the first time with this unit, format

it to ensure accurate recording (l 31, “Format disc”).

[3] Press [CH, W, X] to select the channel.

To select with the numeric

buttons:

TV Mode (Airwaves)

e.g., “5”: [0] )[5]

“15”: [1] )[5]

CATV Mode (Cable)

e.g., “5”: [0] )[0] )[5]

“15”: [0] )[1] )[5]

“115”: [1] )[1] )[5]

[4] Press [REC MODE] to select the recording

mode.

Remaining time on the disc

[5] Press [¥, DVD REC] to start recording.

≥You cannot change the channel or recording mode during

recording. You can change them while recording is paused, but

the material is recorded as a separate title.

∫To pause recording

Press [;, PAUSE]. (Press again to restart recording.)

≥Title is not split into a separate title.

∫To stop recording

Press [∫, STOP].

≥Recorded as 1 title until the position where stopped.

≥DVD-R takes about 30 seconds for the unit to complete recording

management information after recording finishes.

∫To specify a time to stop recording

While recording

Press [¥, DVD REC] to select the recording time.

≥On the main unit, press [¥, REC].

Unit’s Display

Each time you press the button:

Counter (cancel) # 0:30 # 1:00 # 1:30

^------- 4:00 ! 3:00 ! 2:00 !--------}

For your reference

≥This does not work during timer recordings or Flexible Recording.

≥Recording stops and the set time is cleared if you press [∫,STOP].

≥The set time is cleared if you change the recording mode or

channel while recording is paused.

You can watch play or record tapes while recording. The recording

will not be affected.

≥VHS playback (l 49)

≥VHS recording (l 51)

When a tuner channel is being recorded on DVD, you can only

record the same channel on VHS.

Preparation

≥Press [DVD].

Recording TV programs

DVD

RETURN

AUDIO

FUNCTIONS

STATUS

REC MODE

∫

3, 4, 2, 1

ENTER

CH, W, X

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

POWER

TIME SLIP

CHAPTER

JET REW

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

DVD ERASE

VCR Plus+

OUTPUT

;

Numeric

Buttons

Playing/Recording VHS while recording

DVD

PP-Sample.book 26 ページ２００４年３月８日　月曜日　午後６時３分

Recording

Depending on the content being recorded, the recording times may

become shorter than indicated.

(Unit: hour)

° When “Recording Time in EP Mode” has been set to “EP (6H)” in

the SETUP menu (l 43).

The sound quality is lower compared to other recording modes

when using “EP (8H)”.

Note

When recording to DVD-RAM using EP (8H) mode, play may not be

possible on DVD players that are compatible with DVD-RAM. In this

case use EP (6H) mode.

FR (Flexible Recording mode):

The unit automatically selects a recording rate between XP and

EP (8H) that will enable the recordings to fit in the available

recording time on the disc with the best possible recording quality.

≥You can use this function in manual transfer (l 59) or timer

recording (l 28).

≥All recording mode indicators on the unit’s display are lit during FR.

[RAM]

Preparation

≥Press [DVD].

Press [AUDIO].

≥If you change the sound setting while recording, the recorded

sound will also change.

[DVD-R]

Select the audio (Main or SAP) in “Select MTS” in

the SETUP menu

(l 44).

[RAM] [DVD-R]

The unit calculates a recording rate that enables the recording to fit

in the time you set (within the remaining time on the disc) with the

best picture quality.

Preparation

≥Press [DVD].

≥Select the channel to record.

[1] While stopped

Press [FUNCTIONS]. (l 47)

[2] Select “FLEXIBLE RECORDING” with [3, 4, 2,

1] and press [ENTER].

[3] Press [3, 4, 2, 1] to set the recording time.

≥You can also set the recording time with the numeric buttons.

≥Maximum recording time is 8 hours.

[4] Select “Start” with [3, 4, 2, 1] and press

[ENTER].

≥Recording starts.

For your reference

≥It is not possible to change channel or recording mode while

Flexible Recording is paused.

∫To exit the FLEXIBLE REC window without recording

Press [RETURN].

∫To stop recording partway

Press [∫, STOP].

∫To show the time

remaining until recording

finishes

Press [STATUS] several times.

≥It is displayed in units of minutes.

∫ Recording modes and approximate

recording times

DVD-RAM

DVD-R

(4.7 GB)

Single-sided

(4.7 GB)

Double-sided

(9.4 GB)

XP (High quality) 1 2 1

SP (Normal) 2 4 2

LP (Long play) 4 8 4

EP (Extra long play) 8 (6°) 16 (12°)8 (6°)

Selecting audio to record

Stereo:

Main audio (stereo)

≥If the broadcast is “Mono_SAP”, audio will be

monaural even if you select Stereo mode.

SAP:

Secondary audio program (SAP)

≥If recorded in SAP mode, main audio is also

recorded.

Mono: Main audio (monaural)

≥Select “Mono” if reception is poor during a

stereo broadcast.

EP (6H)°

EP (8H)

Picture quality

Recording time

CH12

No Disc

((Stereo

e.g., “Stereo” is selected.

“((” appears when the unit is receiving

the audio type you selected.

Flexible Recording mode (FR)

e.g.: disc is DVD-RAM

ARecorded

BRemained (45 min.)

≥Recordable for 45 minutes in SP mode

CProgram to be recorded

(The program is 60-minute long.)

DThe recording mode automatically switches from SP to LP

according to the remaining time.

EThe program exactly fits into the remaining time.

Before FR

After FR

FLEXIBLE REC

Start Cancel

Record in FR mode

Set recording time

1 Hour 23 Min.Maximum rec time

1 Hour 23 Min.

CH12

REC 1:22

Stereo

DVD-RAM

Remaining

time

DVD

PP-Sample.book 27 ページ２００４年３月８日　月曜日　午後６時３分

Timer Recording

[RAM] [DVD-R]

You can enter up to 16 programs up to a month in advance.

Preparation

≥Release protection (disc l 30, cartridge l 18). [RAM]

≥Insert a disc (l 20) and confirm there is sufficient empty space for

recording on it (l 47).

≥Press [DVD].

Entering the PlusCode numbers is an easy way of timer recording.

You can find these codes in TV listings in newspapers and

magazines.

≥When connecting a cable TV box or satellite receiver, the VCR

Plusi system does not work. Program the timer recording

manually (l right).

[1] Press [VCR Plus_].

[2] Press the numeric buttons to enter the

PlusCode number.

≥Press [2] to move back to correct a digit.

[3] Press [ENTER].

Confirm the program

and correct it if

necessary using [3,

4, 2, 1] (l right,

step 3).

≥When “XP” is

displayed in the unit’s display, the recording mode

automatically changes to “FR” in order to prevent loss of

recording when there is not enough space. Change to “XP”

mode if you want to set timer recording using “XP” mode.

≥“Invalid Entry” is displayed when you enter the wrong PlusCode

number. Reenter the PlusCode number.

≥To enter the title of the program

Press [2, 1] to select “Enter Name” and press [ENTER]

(l 32).

[4] If the program is

correct

Press [ENTER].

≥“ ” lights on the

unit’s display.

≥Repeat steps 1–4 to

program other

recordings.

[5] Press [RETURN].

≥When connecting a cable TV box or satellite receiver, select the

channel on the cable TV box or satellite receiver before timer

recording starts.

[1] Press [PROG/CHECK].

≥Make sure “New Timer Program” is selected.

[2] Press [ENTER].

[3] Use [1] to move and change the items with

[3, 4].

≥You may use the numeric buttons to enter “CHANNEL”,

“DATE”, “ON” and “OFF”.

≥CHANNEL (Program Position/TV Station Name)

≥DATE

You can also make a daily or weekly program.

Each daily or weekly program is counted as one program.

≥ON (start time)/OFF (finish time)

The time increases or decreases in 30-minute increments if

you hold down the button.

≥MODE (Recording mode)

You can also press [REC MODE] to change the recording

mode.

XP,.SP,.LP,.EP,.FR,.XP... (l 27)

≥Enter Name

Press [2, 1] to select “Enter Name” and press [ENTER]

(l 32).

[4] Press [ENTER]

when you have

finished making

changes.

≥“ ” lights on the

unit’s display.

≥To continue

programming:

Select “New Timer Program” and repeat steps 2–4.

[5] Press [RETURN].

∫Caution for Timer recording

Timer recording automatically starts at the set time.

≥Timer recording can be started whether the unit is turned on or

off. When the unit is turned off, the sound and the video cannot

be outputted to the TV.

Using VCR Plus_ system

DVD

RETURN

VCR Plusi

PROG/CHECK

REC MODE

∫

3, 4, 2, 1

ENTER

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

POWER

TIME SLIP

CHAPTER

JET REW

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

DVD ERASE

VCR Plus+

OUTPUT

Numeric

Buttons

VCR Plus+

Remaining Recording Time

4:00 LP

12:53 PM7/13 TUE

MODE

OFFON

CHANNEL

DATE

TIMER

RECORDING

Remaining Recording Time

4:00 LP

39 7/ 6 TUE 21:00 PM20:00 PM SP

Enter Name

12:53 PM7/13 TUE

Manual programming

TIMER

RECORDING

Remaining Recording Time

4:00 LP

21:00 PM20:00 PM39 7/ 6 TUE01

MODE CHECK

OFFONNo

CHANNEL

DATE

New Timer Program

12:57 PM7/13 TUE

Check to make sure “OK” is displayed.

TIMER

RECORDING

Remaining Recording Time

4:00 LP

MODE CHECK

OFFONNo

CHANNEL

DATE

New Timer Program

12:57 PM7/13 TUE

7/ 6 TUE01 SP

21:00 PM20:00 PM39

Highlighted line

is ready for

programming.

MODE

OFFON

CHANNEL

DATE

TIMER

RECORDING

Remaining Recording Time

4:00 LP

Enter Name

12:53 PM7/13 TUE

: :

TIMER

RECORDING

Remaining Recording Time

4:00 LP

MODE CHECK

OFFONNo

CHANNEL

DATE

New Timer Program

12:57 PM7/13 TUE

7/ 6 TUE01 SP

21:00 PM20:00 PM39

7/24 SAT02 SP

3:00 PM 2:30 PM64 ABC

Check to make sure “OK” is displayed.

DVD

PP-Sample.book 28 ページ２００４年３月８日　月曜日　午後６時３分

Timer Recording

Note

≥“ ” flashes when the unit cannot perform timer recording (non-

recordable disc or protected disc, etc.). Check the disc carefully.

≥The actual time recorded may be longer than the program itself

when TV programs are recorded using VCR Plus_ system.

≥When recording more than one program in a row, for DVD-RAM the

first few seconds, and for DVD-R about the first 30 seconds of all

programs from the second one onwards will not be recorded.

≥If you set “DST” (Daylight Saving Time) to “ON” when manually

setting the clock (l 46), timer recording may not work when

summer switches to winter and vice versa.

≥When the unit is carrying out a timer recording:

You may utilize playback.

≥When the disc is not inserted, the disc is full or a non-recordable

disc is inserted, the warning message appears because Timer

Recording is disabled.

∫To stop recording while a program is working

Press [∫, STOP], then [ENTER] within 5 seconds.

≥You can also press and hold [∫] on the main unit for more than 3

seconds to stop recording.

≥Even when the unit is turned off, you can display the timer

recording list by pressing [PROG/CHECK].

Preparation

≥Press [DVD].

[1] Press [PROG/CHECK].

Icon explanations (A)

¥ Now recording

W Programs are overlapped. Recording of the program with the

later start time starts before the earlier program finishes

recording.

n You stopped a weekly or daily timer recording. The icon

disappears the next time the timer starts recording.

F The disc was full. (no enough space)

The TV program is not allowed to record by copy-guard.

X Recording stopped (Dirty disc, etc.)

CHECK (B)

OK: Recordable

# (Date): The last day of daily or weeky recording.

!: Recording stopped (no disc or protected disc, etc.)

[2] Press [3, 4] to select the program.

≥You may also select program by inputting a 2-digit number

using the numeric buttons.

e.g.: “5”: [0] )[5]

“15”: [1] )[5]

≥Use [2, 1] to move to the preceding or following page.

[3] Press [CANCEL/RESET, ¢] to delete,

You cannot delete programs that are currently recording.

or press [ENTER] to change.

The timer recording setting screen appears.

[4] If you pressed [ENTER] in step 3,

Use [3, 4, 2, 1] to change and press [ENTER].

[5] Press [RETURN].

For your reference

≥Programs that failed to record are not deleted from the list

immediately (indicated in gray), but are deleted from the list

automatically at 4 a.m. two days later.

≥During timer recording, you can change the end time as long as the

recording mode is not “FR”.

Timer recording for TV programs cannot be executed on both DVD

and VHS at the same time.

Make sure the timer recording start times do not overlap on both

DVD (l left) and VHS (l 53) timer-programming screens.

When the timer recording settings overlap:

≥When the start time of both timer recordings is the same, the timer

recording of DVD has priority.

≥When tuner channels are specified in timer recordings on both VHS

and DVD, only one timer recording can be started.

≥When the interval between the first timer recording and the second

timer recording on DVD is 1 minute or less as shown below, the

second timer recording on DVD has priority over the timer

recording on VHS even if its start time is later than the timer

recording on VHS.

Preparation

≥Press [DVD].

Check, change or delete programs

TIMER

RECORDING

Remaining Recording Time

4:00 LP

MODE CHECK

OFFONNo

CHANNEL

DATE

New Timer Program

12:57 PM7/13 TUE

Cautions for using timer recording on

DVD and VHS

1 minute

4 CH

10 CH

2 CH

VHS

DVD

PP-Sample.book 29 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

[RAM] [DVD-R]

Preparation

≥Release protection (disc l below, cartridge l 18). [RAM]

≥Press [DVD].

[1] While stopped

Press [FUNCTIONS]. (l 47)

[2] Select “DISC SETTING” with [3, 4, 2, 1] and

press [ENTER].

[3] Use [3, 4] to select a desired item and press

[ENTER].

After this operation, follow the desired operation.

[RAM] [DVD-R]

Refer to “Entering text”. (l 32)

≥The disc name is displayed in the FUNCTIONS window.

Note

≥You cannot give DVD-R titles once they have been finalized.

[RAM]

This allows you to protect discs from accidental erasure.

This allows you to release disc protection.

[4] Select “Yes” with [2] and press [ENTER].

≥To protect ≥To release protection

DISC SETTING

DVD

RETURN

FUNCTIONS

3, 4, 2, 1

ENTER

PLAY

PROG/CHECK

TIME SLIP

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

STATUSDISPLAY

SUB MENU

POWER

VOLUME

INPUT SELECT

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

DVD/VHS POWER

OUTPUT

∫To stop partway

Press [RETURN].

DVD

DVD-RAM

DIRECT NAVIGATOR

TIMER RECORDING

PLAY LIST

SETUP

FLEXIBLE RECORDING

DISC SETTING

Record

Dubbing

/ Edit

Set up

Play back

DISC PROTECTION OFF

CARTRIDGE PROTECTION OFF

e.g., DVD-RAM

Titles 7

DISC SETTING

Disc Name

Format disc

Used 0 : 58

Free 0 : 42 (SP)

Disc Protection

Off

Titles 7

DISC SETTING

Disc Name

Finalize

Used 0 : 58

Free 0 : 42 (SP)

Top Menu

Select First play

DVD-RAM DVD-R

e.g., DVD-RAM e.g., DVD-R

1 Disc Name

1 Disc Protection

DVD

DVD-RAM

DIRECT NAVIGATOR

Pla

back

DISC PROTECTI

123

CARTRIDGE PR

Titles 7

DISC SETTING

Disc Name

Format disc

Used 0 : 58

Free 0 : 42 (SP)

Disc Protection

DVD-RAM

Disc Protection

Set up Disc Protection.

Yes No

Titles 7

DISC SETTING

Disc Name

Format disc

Used 0 : 58

Free 0 : 42 (SP)

Disc Protection

Off

DVD-RAM

Disc Protection

Cancel Disc Protection.

Yes No

DVD

PP-Sample.book 30 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

[RAM]

Some DVD-RAM are unformatted. You must format these discs before using them in this unit.

Formatting also allows you to erase the entire contents of a disc.

[4] Select “Yes” with [2] and press [ENTER].

[5] Select “Start” with [2] and press [ENTER].

≥Formatting starts.

≥A message appears when formatting is finished.

[6] Press [ENTER].

Once the disc has been formatted, the contents cannot be restored. Check carefully before

proceeding. The contents on the disc are erased when you format it even if you have set title or

disc protection.

Note

≥Do not turn the unit off or disconnect the AC power supply cord while the message

“Formatting the disc” is on the TV. This can render the disc unusable.

(This can take up to max. 70 minutes (DVD-RAM). If it takes more than 2 minutes, you can cancel

formatting by pressing [RETURN]. The disc must be reformatted if you do this.)

≥All data on the disc is erased when it is formatted, including recordings made with this unit. Data written to the disc by a computer is also

erased.

≥The disc cannot be formatted if the write protect tab (l 18) is switched to “PROTECT”. Release the protection to continue.

≥The message “Unable to format” appears when trying to format discs this unit cannot use.

For your reference

≥DVD-R and CD-R/RW cannot be formatted.

[DVD-R]

Select whether to show the top menu after finalizing the disc. Do this before finalizing the disc.

[4] Use [3, 4] to select a desired item and press [ENTER].

≥Top Menu: The top menu appears first.

≥Title 1: The disc content is played without displaying the top menu.

[DVD-R]

You can play DVD-R on compatible DVD players by finalizing them on this unit, effectively making

them into DVD-Video that complies with DVD-Video standards.

The menu you create with this unit can also be used on the player.

[4] Select “Yes” with [2] and press [ENTER].

[5] Select “Start” with [2] and press [ENTER].

≥Finalizing starts.

≥A message appears when finalizing is finished.

[6] Press [ENTER].

Note

≥Do not turn the unit off or disconnect the AC power supply cord while the message

“Finalizing the Disc” is on the TV. This can render the disc unusable.

≥Finalizing takes up to about 15 minutes.

≥You can only finalize DVD-R that were recorded on this unit.

≥You cannot record on DVD-R that have been finalized.

≥After finalizing

The disc becomes play-only and you can no longer record or edit it.

DVD-R finalized on this unit may not be playable on other players due to the condition of the recording.

There is a pause of several seconds between titles.

Titles are divided into about 5-minute° chapters.

° This time varies greatly depending on the condition and mode of recording.

≥Visit Panasonic’s homepage for more information about DVDs.

For U.S.A.: http://www.panasonic.com/playDVD-R

For Canada: http://www.panasonic.ca

1 Format disc

1 Select First play

1 Finalize

Format disc

Formatting the disc will erase all contents.

This will take approximately 1 minute.

Are you sure you want to continue?

Yes No

Format disc

All contents of this disc will be

completely erased.

Do you want to continue?

Start Cancel

Select First play

Top Menu

Title 1

Finalize

This will take approximately

≤

minutes.

Do you want to continue?

Yes No

Finalize

You will be unable to record on this disc

one it is finalized.

Are you sure you want to continue?

Start Cancel

DVD

PP-Sample.book 31 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

[RAM] [DVD-R]

You can give names to recorded titles, etc.

The maximum number of characters:

[RAM] Characters

≥Title 64

≥Title (timer recording) 44

≥Play list 64

≥Disc 64

[DVD-R] Characters

≥Title 44

≥Disc 40

If a name is long, parts of it may not be shown on some screens.

Preparation

≥Insert a recorded disc.

≥Release protection.

Disc (l 30), title (l 34), cartridge (l 18) [RAM]

≥Press [DVD].

[1] After the Enter Name screen appears

Use [3, 4, 2, 1] to select the character you

want to enter and press [ENTER].

≥You can enter the following characters.

(1) This window shows the text you have entered. (Name field)

(2) ERASE [;, PAUSE]

(3) SET (when you have finished entering text) [∫, STOP]

(4) SPACE

(5) The title displayed on the menu screen after finalizing the

DVD-R appears. [DVD-R] (l 34)

To enter other characters

Repeat step 1.

[2] Press [∫, STOP].

The title is entered and the screen disappears.

≥You can also finish entering the title by selecting “SET” with [3,

4, 2, 1] and pressing [ENTER].

∫Regarding entering characters

≥To erase characters

Press [;, PAUSE]. (You can also erase characters by selecting

“ERASE” with [3, 4, 2, 1] and pressing [ENTER].)

≥To enter a space

You may enter a space by pressing [¢] and then press

[ENTER].

∫Using the numeric buttons to enter characters

e.g., entering the letter “R”

[1] Press [7] to move to the 7th row.

[2] Press [7] twice to highlight “R”.

[3] Press [ENTER].

∫To correct a character

[1] Use [3, 4, 2, 1] to select the character you want to correct in

the name field.

[2] Press [;, PAUSE]. (You can also erase characters by using [3,

4, 2, 1] to select “ERASE” and pressing [ENTER].)

[3] Use [3, 4, 2, 1] to select the correct character and press

[ENTER].

Note

≥If you enter a long name, it is partially shown in the title list (l 33)

and play list screen (l 37).

∫To cancel partway

Press [RETURN].

≥Text is not saved.

Entering text

Refer to the following pages regarding display of the Enter Name

Screen.

≥Title (l 34).

≥Title (timer recording) (l 28).

≥Disc (l 30).

≥Play list (l 38).

DVD

RETURN

DIRECT NAVIGATOR

SUB MENU

3, 4, 2, 1

ENTER

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

POWER

TIME SLIP

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

VCR Plus+

OUTPUT

:, 9

;

∫

Numeric

Buttons

Enter Name

SPACE

SET

––

ERASE

(1)

(2)

(3)

(4)

2345

ABC a

DEF d

GH I

JKL j

67890

bcij

ef /l %

hiﬂ $&

klON@

n ]

PQRSp

TUV t

WX Y Zw

qrs

()

{}

xyz

DVD-R_

Enter Name

Display in DVD-R

TOP MENU

DVD-R

(5)

JKL

PQR

TUV

7 7

DVD

PP-Sample.book 32 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

[RAM] [DVD-R]

≥The maximum number of items on a disc:

Titles: 99

Chapters: Approximately 1000 (Depends on disc contents.)

Note

≥Once erased or shortened, the title cannot be restored to its original

state. Make certain before proceeding.

≥You cannot edit during recording.

Preparation

≥Insert a disc that has been recorded on.

≥Press [DVD].

[1] Press [DIRECT NAVIGATOR].

[2] Use [3, 4, 2, 1] to select the title you want to

watch and press [ENTER].

≥You can also select titles by entering a 2-digit number with the

numeric buttons.

e.g.: “5”: [0] )[5]

“15”: [1] )[5]

≥If you enter a number larger than the total number of titles, the

last title is selected.

For your reference

≥The Direct Navigator works while stopped, playing or recording.

Preparation

≥Release protection (disc l 30, cartridge l 18). [RAM]

≥When the title is protected (l 34), you can only access

“Properties” and “Cancel Protection”. Release the protection to

access other items. [RAM]

≥Press [DVD].

[1] Press [DIRECT NAVIGATOR].

[2] Use [3, 4, 2, 1] to select a desired title.

≥“To show other pages”, l above

[3] Press [SUB MENU].

[4] Use [3, 4] to select a desired item

and press [ENTER].

[RAM] [DVD-R] (Multiple editing is possible.)

The title is irretrievably erased when you use this procedure and cannot be retrieved. Check the title

carefully before erasing to ensure it isn’t one you want to keep.

[5] Select “Erase” with [2] and press [ENTER].

For your reference

≥The disc’s available recording time may not increase after erasing short titles.

≥The available recording time on DVD-R does not increase when you erase titles.

[RAM] [DVD-R]

You can check the contents of a selected title.

Using the Direct Navigator

Direct Navigator screen icons

: Title protected

: Copy-protected so it was not recorded.

t: Unable to play

¥: Currently recording

Title/Chapter

Programs are recorded as a single title consisting of one chapter.

Title

Chapter

You can divide a title into multiple chapters. [RAM]

(l 23, “Create chapters”, l 35, “Divide Chapter”)

Title

Chapter Chapter Chapter Chapter

You can change the order of chapters and create a play list. [RAM]

≥Titles are divided into about 5-minute chapters after finalizing

(l 31). [DVD-R]

Start End

∫ Selecting recorded titles to play

To show other pages

Press [3, 4, 2, 1] to select “Previous” or “Next” and press

[ENTER].

≥You can also press [:, SKIP] or [9, SKIP] to show other

pages.

∫To clear the title list

Press [RETURN].

- -

DIRECT NAVIGATOR Title View

Previous 02/02 Next

DVD-RAM

- -

- -- -- -

Select

Play

SUB MENU

10 10/25 Mon 8 10/25 Mon

∫ Direct Navigator

Multiple editing

Select with [3, 4, 2, 1] and press [;, PAUSE]. (Repeat)

A check mark appears. Press [;, PAUSE] again to cancel.

∫To stop partway

Press [RETURN].

Properties

Edit

Chapter View

Erase

1 Erase

1 Properties

Erase

Erase Cancel

0 : 58(SP)

Corresponding play list chapters will be erased.

Time remaining after erase

No. 01

Date 13/ 7/2004 Tue

CH 12

Start 1:02 PM

Rec time 0:01

(

)

Football

Properties

DVD

PP-Sample.book 33 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

Edit Sub menu displayed.

[5] Use [3, 4] to select

the desired item and

press [ENTER].

[RAM] [DVD-R]

Refer to “Entering text”. (l 32)

For your reference

≥The full name is shown in the “Properties” screen, but if you enter a

long name, only part of it is shown in the title list.

[RAM] (Multiple editing is possible.)

You can prevent accidental erasure of titles by write-protecting them.

[6] Select “Yes” with [2] and press [ENTER].

For your reference

Titles will be erased even if they are protected if you format the disc

with DISC SETTING (l 31).

[RAM] (Multiple editing is possible.)

[6] Select “Yes” with [2] and press [ENTER].

[RAM]

You can remove unnecessary parts of the recording such as

commercials.

[6] Press [ENTER]

at the start point

and end point of

the section you

want to erase.

(l 35, “For quicker

editing”)

[7] Select “Exit”

with [3, 4] and

press [ENTER].

[8] Select “Erase”

with [2] and

press [ENTER].

∫To erase another part of the same title

After storing the point in “Start” and “End”, select “Next” in step 6 and

perform step 8, then repeat steps 6–8.

For your reference

≥You may not be able to specify start and end points within

3 seconds of each other.

≥You cannot specify start and end points if the picture recorded is

stilled.

≥The unit pauses when the title reaches its end during this

procedure.

≥The disc’s available recording time may not increase after erasing

short parts of titles.

[RAM] [DVD-R]

You can change the image to be shown as a thumbnail picture in the Title View.

[6] Press [1, PLAY] to play.

[7] Press [ENTER] at the point you want to display.

(l 35, “For quicker editing”)

≥To change to another point in the same title:

- Select “Change” with [3, 4] and press [1, PLAY], and then repeat steps 7–8.

[8] Select “Exit” with [3, 4] and press [ENTER].

≥The displayed scene is changed at this point.

For your reference

≥You cannot select the top and end of the title.

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

TIME SLIP

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

STATUSDISPLAY

SUB MENU

VCR Plus+

DVD

RETURN

DIRECT NAVIGATOR

SUB MENU

3, 4, 2, 1

ENTER

:, 9

1 ∫

POWER

VOLUME

INPUT SELECT

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

DVD/VHS POWER

OUTPUT

Preparation

≥Release protection (disc l 30, cartridge l 18). [RAM]

≥Press [DVD].

[1] Press [DIRECT NAVIGATOR].

[2] Use [3, 4, 2, 1] to select a desired title.

≥“To show other pages”, l 33

≥“Multiple editing”, l 33

[3] Press [SUB MENU].

[4] Use [3, 4] to select a desired

item and press [ENTER].

∫To stop partway

Press [RETURN].

1 Edit

Properties

Edit

Chapter View

Erase

Set up Protection

Cancel Protection

Shorten

Change Thumbnail

Divide Title

Enter Name

e.g.: DVD-RAM

11 Enter Name

11 Set up Protection

11 Cancel Protection

DIRECT NAVIGATOR Title View

DVD-RAM

----

10 10/25 Mon 8 10/

Set up Protection

Set title protection.

Yes No

The

adlock mark a

ears.

DIRECT NAVIGATOR Title View

DVD-RAM

----

10 10/25 Mon 8 10/

Cancel Protection

Cancel title protection.

Yes No

The padlock mark disappears.

11 Shorten

DIRECT NAVIGATOR Shorten

DVD-RAM

Start

Exit

0:43.21

PLAY

End

- -:- -.- - - -:- -.- -

Start End

Shorten

Erase Cancel

0 : 58(SP)

Corresponding play list chapters will be erased.

Time remaining after erase

11 Change Thumbnail

DIRECT NAVIGATOR Change Thumbnail

DVD-RAM

Change

Exit

0:00.00

Change

;

DVD

PP-Sample.book 34 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

[RAM]

You can divide a selected title into two. You must make sure when

dividing a title because it cannot be recovered after the procedure.

[6] Press [ENTER]

at the point you

want to divide

the title.

(l below,

“For quicker editing”)

≥To change the point

to divide:

- Select “Divide” with

[3, 4] and press

[1, PLAY], and

then repeat steps 6–8.

[7] Select “Exit” with [3, 4] and press [ENTER].

[8] Select “Divide”

with [2] and

press [ENTER].

≥The title is divided at

the point.

∫To check the

division point

By selecting “Preview” in step 6 and pressing [ENTER], play will

begin from 10 seconds prior to the division point to 10 seconds after

the division point. You can make sure that the division point is

appropriate.

For your reference

≥The divided titles retain the name of the original title. They also

retain the CPRM property (l 18) of the original.

≥Use search and slow-motion to find the points.

≥It is not possible to carry out “Divide” in the following cases:

When the resulting part(s) are extremely short.

When the total number of titles is more than 99.

[5] Use [3, 4, 2, 1] to select the desired chapter.

≥To start play l Press [ENTER].

≥To edit l Follow the steps below.

[6] Press [SUB MENU]

[7] Use [3, 4] to select a desired item and press [ENTER].

[RAM] (Multiple editing is possible.)

[8] Select “Erase” with [2] and press [ENTER].

[RAM]

[8] Press [ENTER]

at the point you

want to divide.

(l below, “For

quicker editing”)

≥Repeat this step to

divide at other

points.

[9] Select “Exit” with [4] and press [ENTER].

Note

≥A little portion of the recording directly preceding the division point

may be lost.

For your reference

≥The divided titles retain the name of the original title. They also

retain the CPRM property (l 18) of the original.

≥It is not possible to carry out “Divide”, when the resulting part(s) are

extremely short.

[RAM]

[8] Select “Combine” with [2] and press [ENTER].

≥The selected chapter and next chapter are combined.

[RAM] [DVD-R]

Go back to Title View.

11 Divide Title

DIRECT NAVIGATOR Divide Title

DVD-RAM

Preview

Divide

Exit

0:00.05

Divide

;

Divide Title

Divide Cancel

Once divided, this title cannot be

recombined.

1 Chapter View

08 4 10/25 Mon

DIRECT NAVIGATOR Chapter View

DVD-RAM

001

Back 02/02 Next

Divide Chapter

Combine Chapters

Title View

Erase Chapter

Divide Chapter

Combine Chapters

Title View

Erase Chapter

e.g.: DVD-RAM

11 Erase Chapter

11 Divide Chapter

Erase Chapter

Erase Cancel

Corresponding play list chapters will be erased.

DIRECT NAVIGATOR Divide Chapter

DVD-RAM

Divide

Exit

0:43.21

PLAY

11 Combine Chapters

11 Title View

For quicker editing

≥Use search (l 22), Time Slip (l 23) or slow-motion (l 22) to

find the desired point.

≥Press [:, SKIP] or [9, SKIP] to skip to the end of a title.

Combine Chapters

Combine Cancel

Combine chapters.

Selected Chapter Following Chapter

001 002

- -

DIRECT NAVIGATOR Title View

Previous 02/02 Next

DVD-RAM

- -

- -- -- -

Select

Play

SUB MENU

10 10/25 Mon 8 10/25 Mon

DVD

PP-Sample.book 35 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

[RAM]

≥The maximum number of items on a disc:

Titles: 99

Chapters: Approximately 1000 (Depends on disc contents.)

Preparation

≥Release protection (disc l 30, cartridge l 18).

≥Press [DVD].

[1] While stopped

Press [FUNCTIONS]. (l 47)

[2] Select “PLAY LIST” with [3, 4, 2, 1] and

press [ENTER].

[3] Select “Create” with [3, 4, 2, 1] and press

[ENTER].

[4] Use [2, 1] to select the source title and press

[4].

[5] Use [2, 1] to select the chapter you want to

add to a play list and press [ENTER].

≥Press [3] to cancel.

≥You can also create a new chapter from the source title.

Press [SUB MENU] to select “Divide Chapter” and press

[ENTER] (l 35, “Divide Chapter”).

[6] Use [2, 1] to select the position to insert the

chapter and press [ENTER].

≥Repeat steps 5–6 to add other chapters.

≥Press [3] to select other source titles.

[7] Press [RETURN].

∫To stop partway through

Press [RETURN].

∫To clear the play list screen

Press [RETURN].

For your reference

≥You may not be able to specify start and end points if the material

is still pictures recorded on other equipment.

Using play list

You can create a play list by gathering your favourite chapters

(l 33) from your recordings. You can also edit the created play

list.

≥Editing play lists doesn’t modify the recorded data.

≥Play lists are not recorded separately so this doesn’t use much

capacity.

∫ Creating play lists

DVD

RETURN

FUNCTIONS

SUB MENU

DVD ERASE

3, 4, 2, 1

ENTER

∫

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

POWER

TIME SLIP

CHAPTER

JET REW

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

DVD ERASE

VCR Plus+

OUTPUT

:, 9

;

Numeric

Buttons

Title Title

Chapter Chapter Chapter Chapter Chapter

Chapter ChapterPlay list

DVD

DVD-RAM

DIRECT NAVIGATOR

TIMER RECORDING

PLAY LIST

SETUP

FLEXIBLE RECORDING

DISC SETTING

Record

Dubbing

/ Edit

Set up

Play back

DISC PROTECTION OFF

CARTRIDGE PROTECTION OFF

∫When you want to select all chapters in the title:

≥Use [2, 1] to select the source title and press [ENTER], then

skip to step 6.

≥Repeat 4-6 to add other titles or chapters.

- -

PLAY LIST Play List View

Previous 01/01 Next

DVD-RAM

- -

- -- -- -

- -- -

Create

01 4 10/25 Mon

Source Title

Source Chapter

01/01

001/001

003

0201

001 002

PLAY LIST Create

DVD-RAM

Source Chapter

Insert position

001/001

003001 002

Chapters in PLAY LIST

Press RETURN to exit.

001/001

Chapters in PLAY LIST

SUB MENU

Press RETURN to exit.

001/001

001

DVD

PP-Sample.book 36 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

[RAM]

Preparation

≥Create play list first (l 36).

≥Press [DVD].

[1] While stopped

Press [FUNCTIONS]. (l 47)

[2] Select “PLAY LIST” with [3, 4, 2, 1] and

press [ENTER].

[3] Press [3, 4, 2, 1] to select the play list and

press [ENTER].

≥You can also select a playlist from the chapter view by entering

a 2-digit number with the numeric buttons.

e.g.: “5”: [0] )[5]

“15”: [1] )[5]

≥If you enter a number larger than the total number of play lists,

the last play list is selected.

∫To stop play list play

Press [∫, STOP]. (The play list appears.)

∫To erase a play list during play

[1] Press [DVD ERASE].

≥A confirmation message will be displayed.

[2] Use [2] to select “Erase” and press [ENTER].

[RAM]

Preparation

≥Create play lists first (l 36).

≥Release protection (disc l 30, cartridge l 18).

≥Press [DVD].

For your reference

≥You can use fast-forward, rewind, pause, and slow-motion while

playing chapters just as you can during normal play.

[1] While stopped

Press [FUNCTIONS]. (l 47)

[2] Select “PLAY LIST” with [3, 4, 2, 1] and

press [ENTER].

≥Chapters are not displayed if you have not yet created a play

list with the disc.

[3] Press [3, 4, 2, 1] to select the play list.

≥“To show other pages”, l above

[4] Press [SUB MENU], then use [3, 4]

to select the operation and press

[ENTER].

(Multiple editing is possible.)

[5] Select “Erase” with [2] and press [ENTER].

The play list is

erased.

≥Once a play list has

been erased, it is

irretrievable. Check

carefully before

proceeding.

≥Even if you erase the play list, the original title is not erased.

Play list information (e.g., time and date) is shown.

∫ Playing play lists

To show other pages

Press [3, 4, 2, 1] to select “Previous” or “Next” and press

[ENTER].

≥You can also press [:, SKIP] or [9, SKIP] to show other

pages.

∫ Using play list to edit play lists/chapters

Multiple editing

Select with [3, 4, 2, 1] and press [;, PAUSE]. (Repeat)

A check mark appears. Press [;, PAUSE] again to cancel.

∫To clear the play list screen

Press [RETURN].

∫To stop partway

Press [RETURN].

Properties

Edit

Chapter View

Erase

1 Erase

Erase

Erase Cancel

Erase Play List?

1 Properties

No. 03

Chapters 004

Date 13/ 7/2004 Tue

Time 0:05.51

Dinosaur

Properties

DVD

PP-Sample.book 37 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

Edit Sub menu displayed.

[5] Use [3, 4] to select the desired item and press [ENTER].

Refer to “Creating play lists”. (l 36)

(Multiple editing is possible.)

[6] Select “Copy” with [2] and press [ENTER].

Refer to “Entering text”. (l 32)

For your reference

≥The full name is shown in the “Properties” screen, but if you enter a

long name, only part of it is shown in the play list screen.

You can change the image to be shown as a thumbnail picture in the

Play List View.

[6] Press [1, PLAY]

to play.

[7] Press [ENTER]

at the point you

want to display.

(l 35, “For quicker

editing”)

≥To change to

another point in the

same title:

- Select “Change” with [3, 4] and press [1, PLAY], and then

repeat steps 7–8.

[8] Select “Exit” with [3, 4] and press [ENTER].

≥The displayed scene is changed at this point.

For your reference

≥You cannot select the top and end of the title.

DVD

RETURN

FUNCTIONS

SUB MENU

DVD ERASE

3, 4, 2, 1

ENTER

∫

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

POWER

TIME SLIP

CHAPTER

JET REW

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

DVD ERASE

VCR Plus+

OUTPUT

:, 9

Numeric

Buttons

[RAM]

Preparation

≥Create play lists first (l 36).

≥Release protection (disc l 30, cartridge l 18).

≥Press [DVD].

For your reference

≥You can use fast-forward, rewind, pause, and slow-motion while

playing chapters just as you can during normal play.

[1] Press [FUNCTIONS]. (l 47)

[2] Select “PLAY LIST” with [3, 4,

2, 1] and press [ENTER].

≥Chapters are not displayed if you have not

yet created a play list with the disc.

[3] Press [3, 4, 2, 1] to select the

play list.

≥“To show other pages”, l 37

≥“Multiple editing”, l 37

[4] Press [SUB MENU], then [3, 4] to select the

operation and press [ENTER].

∫To clear the play list screen

Press [RETURN].

∫To stop partway

Press [RETURN].

Properties

Edit

Chapter View

Erase

1 Edit

Copy

Enter Name

Change Thumbnail

Create

11 Create

11 Copy

11 Enter Name

Copy

Copy Cancel

Copy this Play List?

11 Change Thumbnail

PLAY LIST Change Thumbnail

DVD-RAM

Change

Exit

0:00.00

Change

;

DVD

PP-Sample.book 38 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

[5] Use [3, 4, 2, 1] to select a desired chapter.

≥You can also select a chapter from the chapter view by

entering a 3-digit number with the numeric buttons.

e.g.: “5”: [0] )[0] )[5]

“15”: [0] )[1] )[5]

≥If you enter a number larger than the total number of chapters,

the last chapter is selected.

≥To edit l Follow the steps below.

≥Editing chapters in a play list does not modify the source titles

and source chapters.

[6] Press [SUB MENU]

[7] Use [3, 4] to select a desired item and press

[ENTER].

Refer to “Creating play lists”, step 4–7. (l 36)

[8] Use [3, 4, 2, 1] to select the position to insert

the chapter and press [ENTER].

≥The chapter is

moved and inserted

before the

highlighted chapter.

[8] Press [ENTER]

at the point you

want to divide.

(l 35, “For quicker

editing”)

≥Repeat this step to

divide at other points.

[9] Select “Exit”

with [4] and

press [ENTER].

Note

≥A little portion of the recording directly preceding the division point

may be lost.

For your reference

≥The divided titles retain the name of the original title. They also

retain the CPRM property (l 18) of the original.

≥It is not possible to carry out “Divide”, when the resulting part(s) are

extremely short.

[8] Select “Combine” with [2] and press [ENTER].

≥The selected chapter and next chapter are combined.

(Multiple editing is possible.)

[8] Select “Erase” with [2] and press [ENTER].

≥Even if you erase the chapter, the original title is not erased.

Go back to Play List View.

1 Chapter View

08 10/25 Mon 0:01

PLAY LIST Chapter View

DVD-RAM

001

Back 02/02 Next

Move Chapter

Divide Chapter

Add Chapter

Combine Chapters

Erase Chapter

Play List View

sss

sss sss

Move Chapter

Divide Chapte

Add Chapter

Combine Chapters

Erase Chapter

Play List View

To show other pages

Press [3, 4, 2, 1] to select “Previous” or “Next” and press

[ENTER].

≥You can also press [:, SKIP] or [9, SKIP] to show other

pages.

∫To play a chapter

Press [ENTER] after step 5.

∫To stop chapter play

Press [∫, STOP]. (The chapter view appears.)

∫To erase a chapter during play

[1] Press [DVD ERASE].

≥A confirmation message will be displayed.

[2] Use [2] to select “Erase” and press [ENTER].

11 Add Chapter

11 Move Chapter

11 Divide Chapter

08 10/25 Mon 0:01

PLAY LIST Move Chapter

DVD-RAM

001

Previous 02/02 Next

002 003

sss

sss sss sss

sss

PLAY LIST Divide Chapter

DVD-RAM

Divide

Exit

0:43.21

PLAY

11 Combine Chapters

11 Erase Chapter

11 Play List View

Combine Chapters

Combine Cancel

Combine chapters.

Selected Chapter Following Chapter

001 002

Erase Chapter

Erase Cancel

Erase play list chapter?

- -

PLAY LIST Play List View

Previous 02/02 Next

DVD-RAM

- -

- -- -- -

Select

Play

SUB MENU

10/25 Mon 0:30 10/25 Mon 0:01

Create

DVD

PP-Sample.book 39 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

[RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]

Remote control only

DISPLAY menus contain information about the disc or unit. These

menus allow you to perform the following operations:

≥You can change the subtitles and the angle when using

DVD-Video.

≥You can enjoy repeat play.

≥You can change picture and sound settings when playing back a

DVD.

Preparation

≥Press [DVD].

[1] Press [DISPLAY].

[2] Select the menu with [3, 4] and press [1].

[3] Select the item with [3, 4] and press [1].

[4] Select the setting with [3, 4].

≥Some options require different operations. Follow the on-

screen instructions and the instructions described later.

∫When you are finished

Press [DISPLAY].

For your reference

≥The screens depend on the disc contents.

≥Depending on the condition of the unit (playing, stopped, etc.) and

the type of software you are playing, there are some items that you

cannot select or change.

[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD]

Sound track

Sound track language [DVD-A] [DVD-V]

(See [A] Sound track/Subtitle language)

Change the number to select a sound track.

Audio attribute [RAM] [DVD-R] [DVD-A] [DVD-V]

(See [B] Audio attributes)

Karaoke vocals, on and off (Karaoke [DVD-V] only)

Solo: ON()OFF

Duet: OFF()V1iV2()V1()V2()OFF...

Subtitle

Subtitle language [DVD-A] [DVD-V]

(See [A] Sound track/Subtitle language)

Change the number to select a subtitle language.

Subtitles ON/OFF [RAM] [DVD-R] [DVD-A] [DVD-V]

Turn the subtitles ON or OFF.

Angle

[DVD-A] [DVD-V]

Change the number to select an angle.

STILL-P

[DVD-A]

Page

Still picture number

≥ When “Return” is displayed, select it and press [ENTER] to

return to the default page.

≥ When “RANDOM” is displayed, select it and press [ENTER].

The picture changes randomly each time you press

[ENTER].

Slide show (Display only)

Audio channel

[RAM] [VCD]

Select the audio channel. (l 23)

PBC

[VCD] (l 63)

Playback control on/off

Indicates whether menu play (playback control) is on or off.

[A] Sound track/Subtitle language

[B] Audio attributes

LPCM/PPCM/

Î Digital/DTS/MPEG: Signal type

k (kHz): Sampling frequency

b (bit): Number of bits

ch (channel): Number of channels

For your reference

≥When playing back recordings of bilingual broadcasts, “1_1 ch” will

be displayed.

≥You can only select subtitles, sound tracks, and angles if they are

recorded on the disc.

≥Some discs allow changes to sound tracks, subtitles, and angles

only by using the disc’s menus.

≥If the subtitles overlap closed captions recorded on discs, turn the

subtitles off.

Using DISPLAY menus

POWER

VOLUME

INPUT SELECT

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

DVD/VHS POWER

OUTPUT

DVD

DISPLAY

3, 4, 1

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

TIME SLIP

CHAPTER

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

STATUSDISPLAY

SUB MENU

DVD ERASE

∫ Common procedures

Disc

Video

Audio

Play

Sound track

Subtitle

Audio channel

OFF

Î Digital 2/0ch

L R

ItemMenu Setting

1 Disc menu

Disc

Video

Audio

Play

Sound track

Subtitle

Audio channel

OFF

L R

Î Digital 2/0ch

ENG:

FRA:

DEU:

ITA:

ESP:

NLD:

English

French

German

Italian

Spanish

Dutch

SVE:

NOR:

DAN:

POR:

RUS:

JPN:

Swedish

Norwegian

Danish

Portuguese

Russian

Japanese

CHI:

KOR:

MAL:

VIE:

THA:

¢:

Chinese

Korean

Malay

Vietnamese

Thai

Others

DVD

PP-Sample.book 40 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

[RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]

Repeat play

This function works only when the elapsed play time is displayed.

[RAM] [DVD-R] [DVD-V]

Title,.Chapter,.OFF

^--------------------------J

[CD] [VCD]

Track,.All,.OFF

^-------------------J

[DVD-A] [MP3]

Track,.Group,.OFF

^--------------------------J

While playing a play list

[RAM]

PL (play list),.OFF

^---------------------------J

Note

≥Repeat play may not work as desired with some discs.

≥You cannot use repeat play for an entire DVD-Audio, DVD-Video,

MP3 discs or all the play lists on a DVD-RAM.

≥While playing back, you can set repeat play. When stopped, the

repeat play operation is cancelled.

≥[DUBBING] or [DVD ERASE] does not work while in repeat play

[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD]

Picture

To select the picture mode during play

Normal: Default setting

Soft: Soft picture with fewer video artifacts

Fine: Details are sharper

Cinema: Mellow movies, enhances detail in dark scenes.

MPEG-DNR

Reduces noise and picture degradation.

You can turn the recommended settings for DNR on and off.

ON()OFF

Progressive

(l 63)

Select “ON” to enable progressive output.

≥Select “OFF” if the picture is stretched horizontally.

≥When progressive output is on, closed captions cannot be

displayed.

ON()OFF

Transfer

(When “Progressive” is set to “ON”)

Select the method of conversion for progressive output to suit

the type of material being played (l 63, Film and video).

Auto1 (normal):

Detects 24 frame-per-second film content and

appropriately converts it.

Auto2: Compatible with 30 frame-per-second film content in

addition to 24 frame-per-second film content.

Video: Select when using Auto1 and Auto2, and the video

content is distorted.

° Only when you have selected “480P” in “TV Type” (l 17).

[RAM] [DVD-R] [DVD-A] [DVD-V]

V.S.S.

[RAM] [DVD-R] [DVD-V]

(Only for Dolby Digital with 2 or more channels)

Enjoy a surround-like effect if you are using 2 front speakers

only. The effect is broadened and sound seems to come from

virtual speakers on either side if the disc has surround signals

recorded on it.

Natural()Emphasis()OFF()Natural...

Note

≥V.S.S. will not work, or will have less effect, with some discs, even

if you select “Natural” or “Emphasis”.

≥Turn V.S.S. off if it causes distortion.

≥V.S.S. does not work for SAP recordings.

Dialog Enhancer

[DVD-A] [DVD-V]

(Dolby Digital, 3-channel or over only, including a center channel)

The volume of the center channel is raised to make dialog easier

to hear.

ON()OFF

1 Play menu

Disc

Video

Audio

Play

Repeat Play

OFF

1 Video menu

Disc

Video

Audio

Play

Picture

MPEG-DNR

Progressive Transfer

Auto 1ON

Normal

1 Audio menu

Disc

Video

Audio

Play

V.S .S .

Dialog Enhancer

OFF

DVD

PP-Sample.book 41 ページ２００４年３月８日　月曜日　午後６時３分

Various Settings

Preparation

≥Press [DVD].

Use the following procedure to change the settings if necessary.

[1] While stopped

Press [FUNCTIONS]. (l 47)

[2] Select “SETUP” with [3, 4, 2, 1] and press

[ENTER].

[3] Use [3, 4] to select the menu’s tab and press

[2, 1].

[4] Use [3, 4] to select the item to be changed and

press [ENTER].

[5] Use [3, 4] to select an option and press

[ENTER].

≥Some options require different operations. Follow the displayed

instructions.

∫To return to the previous screen

Press [RETURN]. Even if you have changed an option, the change is

not activated until you press [ENTER].

∫To exit the screen

Press [RETURN] several times.

For your reference

≥The settings remain intact even if you switch the unit to standby.

You can limit play of DVDs unsuitable for some audiences (children,

for example). Play and changes to the settings are not possible

unless you enter a password. (l 43)

Preparation

≥Press [DVD].

When setting ratings

The password screen is shown when you select levels 0 to 7.

[1] Input a 4-digit password with the numeric buttons.

≥If you enter a wrong number, press [2] to erase it before you

press [ENTER].

≥Do not forget your password.

[2] Press [ENTER].

[3] Press [ENTER].

The password is entered and the unit is locked.

Now, when you insert a DVD-Video that exceeds the ratings limit you

set, a message appears on the TV.

Follow the on-screen instructions.

When changing ratings

The password screen is shown when you select “Ratings”.

[1] Input a 4-digit password with the numeric buttons and press

[ENTER].

Unlock Recorder: To unlock the unit and return the rating to 8

Change Password: To change your password

Change Level: To change the rating level

Temporary Unlock: To temporarily unlock the unit (the unit locks

again if you switch it to standby or open the

disc tray)

[2] Select the item with [3, 4] and press [ENTER].

Actual screens depend on the operation. Follow the on-screen

instructions.

Changing the unit’s settings

∫ Common procedures

DVD

RETURN

FUNCTIONS

3, 4, 2, 1

ENTER

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

POWER

TIME SLIP

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

VCR Plus+

OUTPUT

Numeric

Buttons

Off Timer

Channel

Set Up

Disc

Video

Audio

Display

TV Screen

Remote Control Code

DVD/VHS Output

6 hr

Automatic

Set Code 1

Time Zone Adjust

Re-initialize Settings

Auto Clock Setting

Manual Clock Setting

(1) (2) (3)

SETUP

(1) Menus

(2) Items

(3) Options

Entering a password (Ratings)

DVD

PP-Sample.book 42 ページ２００４年３月８日　月曜日　午後６時３分

Various Settings

This description shows the initial settings for this unit. For

details on menu operation (l 42).

≥Underlined items are the factory presets.

∫Channel

Antenna System

(l 14)

[TV] [CATV

]

Auto Channel Setting (l 14)

Preset Channel Captions (l 16)

Manual Channel Captions (l 16)

VCR Plus+ CH Setting (l 15)

∫Set Up

Off Timer

Select how long the unit remains on when it is not being used.

[2 hr] [6 hr

] [Off]

Remote Control Code (l 17)

[Set Code 1

] [Set Code 2] [Set Code 3]

DVD / VHS Output (l 12)

Select how to switch the output from the DVD/VHS COMMON output

terminal on the back of this unit.

[Automatic

] [Manual]

Auto Clock Setting (l 46)

Manual Clock Setting (l 46)

Time Zone Adjust (l 46)

This corrects the time set in Auto Clock Setting.

The status is not displayed on the Set Up menu when the Auto Clock

Setting is not set.

[j1] [0

][i1]

Re-initialize Settings

This returns all values in the SETUP menus, except for the clock,

channel settings, ratings level, and on-screen language, to the

default settings.

[Yes] [No

]

∫Disc

Languages

Choose the language for audio, subtitle and disc menus. [DVD-V]

Press [ENTER] to display the menu.

≥Some discs are designed to start in a certain language despite any

changes made here.

≥If a language which is not recorded is selected, or if languages are

already fixed on the disc, the language set as the default on the

disc will be played instead.

Audio Language

[English

] [French] [Spanish] [Original] [Other ¢¢¢¢]

Subtitle Language

[Automatic

] [English] [French] [Spanish] [Other ¢¢¢¢]

Menu Language

[English

] [French] [Spanish] [Other ¢¢¢¢]

Original

The original language of each disc will be selected.

Other ¢¢¢¢

This is the language code setting.

Input a code number with the numeric buttons. (l 45,

“Language code list”.)

Automatic

If the language selected for “Audio Language” is not available,

subtitles of that language will automatically appear if available on

that disc.

Ratings (l 42)

Set a ratings level to limit DVD-Video play.

Setting ratings (When level 8 is selected)

[8 No Limit]

: All DVD-Video can be played.

[1] to [7]: Prohibits play of DVD-Video with corresponding

ratings recorded on them.

[0 Lock All]: Prohibits play of all DVD-Video.

Changing ratings (When level 0–7 is selected)

[Unlock Recorder] [Change Password]

[Change Level] [Temporary Unlock]

Recording Time in EP Mode

Select the maximum number of hours for recording in EP mode

(l 27, “Recording modes and approximate recording times”).

[EP (6H)] [EP (8H)

]

Play DVD-Audio in Video Mode

Select “Video (On)” to play DVD-Video content on DVD-Audio.

[Video (On)] [Audio (Off)

]

Summary of settings

Automatic Select this when you want to switch the output

automatically according to the operation or action of

this unit.

≥You can also switch the output by pressing [DVD/

VHS OUTPUT].

Manual Select this when you want to switch the output

between DVD and VHS manually.

≥The output is switched alternately by pressing [DVD/

VHS OUTPUT].

EP (6H) You can record for 6 hours on an unused 4.7 GB disc.

EP (8H) You can record for 8 hours on an unused 4.7 GB disc.

Video (On) The setting returns to “Audio (Off)” when you change

the disc or turn the unit off.

DVD

PP-Sample.book 43 ページ２００４年３月８日　月曜日　午後６時３分

Various Settings

Underlined items are the factory presets.

∫Video

3-D Y/C Separation

[On] [Off]

Hybrid VBR Resolution (l 63, “VBR”) [RAM]

[Automatic] [Fixed

]

Still Mode

Select the type of picture shown when you pause play.

(l 63, “Frame and field”)

[Automatic

] [Field] [Frame]

Line-in NR

Reduces video tape noise while transferring (dubbing).

≥When noise reduction is on, “3-D Y/C Separation” (l above) does

not work regardless of the setting.

[Automatic

] [On] [Off]

Black Level Control

Select normal, lighter or darker for adjusting the black level control to

the desired setting for picture enhancement.

Input Level

Adjusts the black level of the input signal.

[Lighter] [Darker

]

Output Level (Composite/S Video)

Adjusts the black level of the output signal from the VIDEO OUT

and S-VIDEO OUT terminal.

[Lighter

][Darker]

Output Level (Component)

Adjusts the black level of the output signal from the COMPONENT

VIDEO OUT (Y/P

B/PR) terminals.

[Lighter] [Normal

][Darker]

∫Audio

Search Audio & PLAY t1.3

[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] (l 21)

Choose whether to operate the Quick View (Play k1.3) or not and

whether to have sound during search.

[On

] [Off]

[DVD-A]

≥You may hear sound regardless of this setting with some discs.

D. Range Compression

[DVD-V] (Dolby Digital only)

Change the dynamic range for late night viewing.

[On] [Off

]

Select MTS

Select whether to record the main or secondary audio type (SAP)

when recording or transferring (dubbing) to DVD-R. (You cannot

change secondary audio when recording audio to DVD-R from an

external source.)

≥When recording/transferring (dubbing) to DVD-R

[Main

] [SAP]

Digital Audio Output

Change the settings when you have connected equipment through

this unit’s DIGITAL AUDIO OUT terminal (l 12).

Press [ENTER] to display the menu.

PCM Down Conversion

Select how to output audio with a sampling frequency of 96 kHz or

88.2 kHz.

≥Signals are converted to 48 kHz or 44.1 kHz despite the above

settings if the signals have a sampling frequency of over 96 kHz

or 88.2 kHz, or the disc has copy protection.

[On] [Off

]

Dolby Digital

Choose whether to output Dolby Digital bitstream signals for

decoding on other equipment or to convert them to PCM signals

for 2-channel output.

[Bitstream

][PCM]

DTS

Choose whether to output DTS bitstream signals for decoding on

other equipment or to not.

[Bitstream] [PCM

]

° Set “Dolby Digital” to “PCM” and “DTS” to “PCM” if the other

equipment doesn’t have decoders. Incorrect settings can cause

noise to be output which can be harmful to your ears and

speakers, and audio will not be recorded properly to digital

recording equipment.

On Reduces noise by separating the luminance (Y) and

color (C) signals when recording.

Off Reduces the ghosting that occurs when recording fast

moving images.

Automatic The resolution is automated to provide efficient

recording with less block-shaped noise.

Fixed The resolution is fixed to ensure there is no loss of

source picture resolution while recording.

Field Select if jittering occurs when “Automatic” is selected.

Frame Select if small text or fine patterns cannot be seen

clearly when “Automatic” is selected.

Automatic Noise reduction only works on picture input from a

video tape.

On Noise reduction works for any video input.

Off Noise reduction is off. Select when you want to record

input as is.

On Signals are converted to 48 kHz or 44.1 kHz. (Choose

when the connected equipment cannot process

signals with sampling frequency of 96 kHz or

88.2 kHz.)

Off Signals are output as 96 kHz or 88.2 kHz. (Choose

when the connected equipment can process signals

with sampling frequency of 96 kHz or 88.2 kHz.)

Bitstream When you have connected a unit with a built-in Dolby

Digital decoder.

PCM When you have connected a unit that doesn’t have a

built-in Dolby Digital decoder.°

Bitstream When you have connected a unit with a built-in DTS

decoder.

PCM When you have connected a unit that doesn’t have a

built-in DTS decoder.°

DVD

PP-Sample.book 44 ページ２００４年３月８日　月曜日　午後６時３分

Various Settings

Underlined items are the factory presets.

ªDisplay

Status Messages

Choose whether to show status messages automatically or not.

[Automatic

] [Off]

On-screen Language

Choose the language for these menus and the on-screen messages.

[English

] [Español] [Français]

Blue Background

Select whether to show the blue background, normally shown when

TV reception is poor.

[On

] [Off]

Front Display

Changes the brightness of the unit’s display.

[Bright

][Dim][Automatic]

∫TV Screen

TV Type

(l 17)

Choose the setting to suit your TV and preference.

[Aspect 4:3 & 480I

] [Aspect 4:3 & 480P]

[Aspect 16:9 & 480I] [Aspect 16:9 & 480P]

4:3 TV Settings for DVD-Video

You can select how to display the image on the TV when you watch

16:9 images (DVD-Video) on a 4:3 standard aspect TV.

[Pan & Scan

] [Letterbox]

4:3 TV Settings for DVD-RAM

You can select how to display the image on the TV when you watch

16:9 images (DVD-RAM) on a 4:3 standard aspect TV.

[4:3

] [Pan & Scan] [Letterbox]

Automatic The display turns dark during play, and reappears

momentarily if a button is pressed. When the unit is

turned off all displays disappear. While using this

mode the standby power consumption can be

reduced.

Pan & Scan Video recorded for a widescreen is played with

the sides cut off if Pan & Scan was specified by

the producer of the disc. If 16:9 software

prohibits Pan & Scan, the image will appear in

the letterbox style (with black bands above and

below the picture) despite the setting here.

Letterbox Video recorded for a widescreen is played in

the letterbox style.

4:3 Titles played as recorded.

Pan & Scan Video recorded for a widescreen is played with the

sides cut off if the Pan & Scan format is specified at

the time of recording.

Letterbox Video recorded for a widescreen is played in the

letterbox style.

Language code list

Abkhazian: 6566

Afar: 6565

Afrikaans: 6570

Albanian: 8381

Ameharic: 6577

Arabic: 6582

Armenian: 7289

Assamese: 6583

Aymara: 6588

Azerbaijani: 6590

Bashkir: 6665

Basque: 6985

Bengali, Bangla: 6678

Bhutani: 6890

Bihari: 6672

Breton: 6682

Bulgarian: 6671

Burmese: 7789

Byelorussian: 6669

Cambodian: 7577

Catalan: 6765

Chinese: 9072

Corsican: 6779

Croatian: 7282

Czech: 6783

Danish: 6865

Dutch: 7876

English: 6978

Esperanto: 6979

Estonian: 6984

Faroese: 7079

Fiji: 7074

Finnish: 7073

French: 7082

Frisian: 7089

Galician: 7176

Georgian: 7565

German: 6869

Greek: 6976

Greenlandic: 7576

Guarani: 7178

Gujarati: 7185

Hausa: 7265

Hebrew: 7387

Hindi: 7273

Hungarian: 7285

Icelandic: 7383

Indonesian: 7378

Interlingua: 7365

Irish: 7165

Italian: 7384

Japanese: 7465

Javanese: 7487

Kannada: 7578

Kashmiri: 7583

Kazakh: 7575

Kirghiz: 7589

Korean: 7579

Kurdish: 7585

Laotian: 7679

Latin: 7665

Latvian, Lettish: 7686

Lingala: 7678

Lithuanian: 7684

Macedonian: 7775

Malagasy: 7771

Malay: 7783

Malayalam: 7776

Maltese: 7784

Maori: 7773

Marathi: 7782

Moldavian: 7779

Mongolian: 7778

Nauru: 7865

Nepali: 7869

Norwegian: 7879

Oriya: 7982

Pashto, Pushto: 8083

Persian: 7065

Polish: 8076

Portuguese: 8084

Punjabi: 8065

Quechua: 8185

Rhaeto-Romance: 8277

Romanian: 8279

Russian: 8285

Samoan: 8377

Sanskrit: 8365

Scots Gaelic: 7168

Serbian: 8382

Serbo-Croatian: 8372

Shona: 8378

Sindhi: 8368

Singhalese: 8373

Slovak: 8375

Slovenian: 8376

Somali: 8379

Spanish: 6983

Sundanese: 8385

Swahili: 8387

Swedish: 8386

Tagalog: 8476

Tajik: 8471

Tamil: 8465

Tatar: 8484

Telugu: 8469

Thai: 8472

Tibetan: 6679

Tigrinya: 8473

Tonga: 8479

Turkish: 8482

Turkmen: 8475

Twi: 8487

Ukrainian: 8575

Urdu: 8582

Uzbek: 8590

Vietnamese: 8673

Volapük: 8679

Welsh: 6789

Wolof: 8779

Xhosa: 8872

Yiddish: 7473

Yoruba: 8979

Zulu: 9085

DVD

PP-Sample.book 45 ページ２００４年３月８日　月曜日　午後６時３分

Various Settings

Preparation

≥Press [DVD].

[1] While stopped

Press [FUNCTIONS]. (l 47)

[2] Select “SETUP” with [3, 4, 2, 1] and press

[ENTER].

[3] Select “Set Up”

tab with [3, 4]

and press [2,

1].

[4] Select “Auto Clock Setting” with [3, 4] and

press [ENTER].

[5] Press [ENTER].

Auto setting starts. This can take some time, up to a few hours in

some cases. The following screen appears when setting is

complete.

≥If the time was not set correctly, use manual clock setting or

time zone adjust.

≥DST, Daylight Saving Time, shows the summertime setting.

≥TIME ZONE shows the time difference from Greenwich mean

time (GMT).

EST (Eastern Standard Time) l GMT j5

CST (Central Standard Time) l GMT j6

MST (Mountain Standard Time) l GMT j7

PST (Pacific Standard Time) l GMT j8

AST (Alaska Standard Time) l GMT j9

HST (Hawaii Standard Time) l GMT j10

For other areas: xx hr

[6] Press [ENTER].

∫To cancel partway

Press [RETURN].

Adjust the time zone (j1 or i1) if it was not set correctly with auto

clock setting.

You cannot change this setting if you set the clock manually.

[4] Select “Time Zone Adjust” with [3, 4] and

press [ENTER].

[5] Select “j1” or “i1” with [3, 4] and press

[ENTER].

[4] Select “Manual

Clock Setting”

with [3, 4] and

press [ENTER].

[5] Use [2, 1] to

select the item

you want to

change and

press [3, 4] to change the setting.

≥DST (Daylight Saving Time): ON or OFF

If you select “ON”, the clock is advanced one hour starting at

2 a.m. on the first Sunday in April and ending at 2 a.m. on the

last Sunday in October.

≥TIME ZONE (l above)

[6] Press [ENTER].

≥The clock starts.

≥When you change the time zone, the recording times for titles

recorded before the time zone was changed also change to

correspond to the new time zone.

Clock Settings

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

TIME SLIP

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

STATUSDISPLAY

SUB MENU

DVD

STATUS

RETURN

FUNCTIONS

3, 4, 2, 1

ENTER

POWER

VOLUME

INPUT SELECT

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

DVD/VHS POWER

OUTPUT

Off Timer

Channel

Set Up

Disc

Video

Audio

Display

TV Screen

Remote Control Code

DVD/VHS Output

6 hr

Automatic

Set Code 1

Time Zone Adjust

Re-initialize Settings

Auto Clock Setting

Manual Clock Setting

SETUP

1 Auto Clock Setting

Auto Clock Setting

Auto Clock Setting is complete.

7/15/2004 11:15 AM

DST................... ON

TIME ZONE..... CST

1 Time Zone Adjust

1 Manual Clock Setting

∫To return to the previous screen

Press [RETURN].

Time Zone Adjust

Manual Clock Setting

/ :

SAT PM

MONTH DAY YEAR

HOUR MINUTE

12 00

2000

DST TIME ZONE

OFF

EST

DVD

PP-Sample.book 46 ページ２００４年３月８日　月曜日　午後６時３分

Various Settings

By using the FUNCTIONS window you can access the main

functions quickly and easily.

Preparation

≥Press [DVD].

[1] While stopped

Press [FUNCTIONS].

≥Functions displayed depend on the type of disc.

[2] Press [3, 4, 2, 1] to select an item and press

[ENTER].

∫To exit the FUNCTIONS window

Press [FUNCTIONS].

Preparation

≥Press [DVD].

Status messages appear on the TV when operating the unit to show

you what operation was performed and what condition the unit is in.

Press [STATUS] to change the information

displayed.

The display changes each time you press the button.

For example, DVD-RAM

(1) Current medium

(2) Current recording or play status, input

channel

≥Shows the current state of the unit and

the input channel.

REC: Recording

PAUSE: Recording paused

PLAY: Playing

PLAY t1.3: Quick Viewing (Play k1.3)

;: Playing Paused

5: Fast forwarding (5 speeds)

6: Rewinding (5 speeds)

F: Slow-motion (5 speeds)

G: Reverse slow-motion (5 speeds)

OPEN/CLOSE: Indicates the status of the disc tray

(3) Audio type (l 23, 27)

(4) Available recording time and recording mode

(e.g.: “2:34 XP” indicates 2 hours and 34 minutes in XP mode)

(5) The current date and time

(6) Recording time

≥Shows recording time, recording mode and a rough guide to

how much space has been used for recording on the disc.

(7) Elapsed play time

(8) Play position

(9) Amount of recording space used

FUNCTIONS window

Status displays

∫ Changing the information displayed

DVD

DVD-RAM

DIRECT NAVIGATOR

TIMER RECORDING

PLAY LIST

SETUP

FLEXIBLE RECORDING

DISC SETTING

Record

Dubbing

/ Edit

Set up

Play back

DISC PROTECTION OFF

CARTRIDGE PROTECTION OFF

2:34 XP6/8 10:15 PM

T2 0:05.14 XP

T1 0:00.10 SP

Remain

REC

PLAY

DVD-RAM

L R

REC

PLAY

DVD-RAM

L R

No display

∫ Display examples

REC

PLAY

DVD-RAM

L R

(1)

(2)

(3)

2:34 XP6/8 10:15 PM

T2 0:05.14 XP

T1 0:00.10 SP

Remain

(5)

(6)

(7)

(8)

(9)

(4)

DVD

PP-Sample.book 47 ページ２００４年３月８日　月曜日　午後６時３分

[[VHS]]

Before Use

The surface from which you can see a roll of tape should face up,

Insert a video cassette.

≥This unit is automatically turned on.

∫To eject a video cassette

≥You can eject a video cassette when the unit is in standby mode. It switches

back to standby once it ejects the video cassette.

For main unit.

≥Press [<, EJECT] on the main unit.

For remote control.

≥Press [VHS] and then press and hold [∫, STOP] for about 3 or more seconds.

≥Break out the video cassette’s tab to prevent accidental erasure. Cover the hole with a double layer of

adhesive tape when you want to use the video cassette for recording again.

≥You can use video cassettes with the VHS and S-VHS marks, but this unit is unable to make full use of the

characteristics of S-VHS video cassettes.

≥Poor quality or damaged video cassettes can cause the heads to become dirty and malfunction. Store your video cassettes carefully and

discard them when they become dirty or damaged.

≥Never use video cassettes on which juice has been spilt or those that are extremely damaged since this will not only cause the heads to

become dirty, but will also make the unit malfunction.

Cleaning the video heads

Dirt on the video heads can cause poor recording and play.

If the picture does not improve, use an optional head-cleaning cassette (part number NV-TCL30PT). If the problem persists, seek advice from

a qualified service person.

Inserting video cassette

Video cassette information

∫ Video cassettes

∫ Video cassette care

∫ Maintenance

Tab

VHS

PP-Sample.book 48 ページ２００４年３月８日　月曜日　午後６時３分

Playback

Preparation

≥Select the unit viewing channel (or the AV input) on the TV.

≥Press [VHS].

[1] Press [Í, DVD/VHS POWER] to turn the unit on.

[2] Insert a recorded video cassette.

(l 48)

[3] Press [1, PLAY].

≥Play starts automatically if you insert a video cassette that has

had its tab removed.

∫To still playback

Press [;, PAUSE]. (Press again to restart play.)

∫To stop play

Press [∫, STOP].

Note:

≥When the unit is off, an inserted video cassette can be played back

by pressing [1, PLAY].

≥When the tape reaches its end, this unit automatically rewinds it to

the beginning. This function does not work during timer recording,

fast-forwarding and specified stop recording.

≥Jet Search, cue, review or slow playback will be automatically

released after 10 minutes, and still playback, after 5 minutes.

≥When viewing a still picture or slow playback, the picture that

appears in VP mode may be distorted.

≥When playing back a tape which was recorded on another VCR, it

may be necessary to adjust tracking (l 50). In some cases the

picture quality may still be inferior. This is due to format constraints.

While stopped

Press [6] (backward)/[5] (forward).

During play

Tap or keep pressing [6] (backward)/[5]

(forward).

≥If you keep pressing these buttons, playback restarts by releasing

them.

≥Press [1, PLAY] to restart playback.

During play

Tap [6] (backward)/[5] (forward) twice. You

can increase Cue/Review search speed.

≥Press [1, PLAY] to restart playback.

≥Select search speed to view the recorded picture. (l 56)

≥The picture that appears in EP or VP mode at approx. 35 times

speed may be distorted. A vertical scroll may occur. It is not a

malfunction but if it happens, change to approx. 27 times speed.

≥The picture may not be in colour or may be distorted depending on

the TV.

During play

Press and hold [;, PAUSE] for 2 seconds or more.

≥Press [1, PLAY] to restart playback.

To perform a Higher Speed Rewind

Press [JET REW6].

The “J. REW” indication appears on the TV screen (except when the

remaining tape time indication appears).

≥Depending on the tape or an operating condition, the rewind speed

may change somewhat.

≥The tape counter is reset to “0:00.00” when the tape is rewound to

the beginning.

≥Depending on the tape, this function may not work.

Playing a video cassette

VHS

POWER

VOLUME

INPUT SELECT

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

DVD/VHS POWER

OUTPUT

SKIP/INDEX

SLOW/

REW

PLAY

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

CM SKIP

CANCEL/RESET

AUDIO

VCR Plus+

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

CHAPTER

JET REW

DVD ERASE

6 JET REW

;

∫

6, 5

Preparation

≥Press [VHS].

Fast-forward / Rewind

Cue / Review

Jet Search

Slow

Jet Rewind

VHS

PP-Sample.book 49 ページ２００４年３月８日　月曜日　午後６時３分

Playback

It is also possible to play back tapes recorded in the S-VHS system.

≥Some picture noise may occur depending on the type of tape used.

≥It is not possible to fully obtain the high resolution that S-VHS is

capable of.

It is not possible to record in the S-VHS system with this unit.

During play or while stopped

Keep pressing [1, PLAY] for 5 or more

seconds.

≥The “RP” indication appears on the display.

≥At the end of the program, the tape rewinds to the

beginning of the program and plays it again (it only

works if there is at least 5 seconds blank at the end of the

program). This repeats until you cancel it.

∫To cancel

Press [∫, STOP].

The unit usually makes tracking adjustments, but you may need to

do it manually if noise appears on a tape recorded on other

equipment.

During play

Press [TRACKING/V-LOCK, r] or

[TRACKING/V-LOCK, s].

Repeat until the noise disappears.

Adjust the vertical to stop the picture from jiggling while paused.

While paused

Press [TRACKING/V-LOCK, r] or

[TRACKING/V-LOCK, s].

Repeat until the jiggling stops.

∫To return to auto tracking

Press both [TRACKING/V-LOCK, r] and [TRACKING/V-LOCK, s]

simultaneously.

∫To remove the noise from a paused picture

Start slow play, then adjust the tracking.

Note:

≥This may not work with some TV models and tapes.

≥You can also adjust the tracking and vertical with [CH, W, X] on the

unit.

Preparation

≥Press [VHS].

S-VHS Quasi Playback (SQPB)

Repeat Playback

REC MODE

VHS

STATUS

TV/VIDEO

;

∫

CH, W, X

TRACKING/

V-LOCK, r, s

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

POWER

TIME SLIP

CHAPTER

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

DVD ERASE

VCR Plus+

OUTPUT

Numeric

Buttons

Adjusting the playback picture

∫ Manual tracking

∫ Vertical locking adjustment

VHS

PP-Sample.book 50 ページ２００４年３月８日　月曜日　午後６時３分

Recording

Preparation

≥Select the unit viewing channel (or the AV input) on the TV.

≥Check that the clock is set to the correct time. If it has not been set,

refer to page 46.

≥Press [VHS].

[1] Insert a video cassette with an intact erasure

prevention tab.

(l 48)

[2] Press [CH, W, X] to select the TV station.

≥If you keep pressing these buttons, the channels change

quickly.

≥You can also select channels with the numeric buttons.

TV Mode (Airwaves)

e.g., “5”: [0] )[5]

“15”: [1] )[5]

CATV Mode (Cable)

e.g., “5”: [0] )[0] )[5]

“15”: [0] )[1] )[5]

“115”: [1] )[1] )[5]

[3] Press [REC MODE] to select the tape speed.

Each time you press the button:

SP>EP>VP>SP

[4] Press [¥, VHS REC] to start recording.

∫To pause Recording

Press [;, PAUSE]. (Press it again to restart recording.)

∫To stop recording

Press [∫, STOP].

Note:

≥Even if the video cassette you use is labeled “S-VHS”, it is not

possible to record in the S-VHS system with this unit. It

records in normal VHS system.

≥You cannot play VP recording on other equipment.

≥You cannot change channels while recording. You can change

channels while in pause mode.

≥When recording is paused for more than 5 minutes, the unit returns

to stop mode.

∫To Display the Approximate Remaining Tape Time

[1] Select “TAPE SELECT” from the on screen display and select the

corresponding tape length. (l 56)

[2] Press [STATUS].

The display changes as follows each time [STATUS] is pressed.

Clock )Counter )Remaining Tape Time )Clock

≥The remaining tape time may not be displayed correctly depending

on the tape used.

∫To specify a time to stop recording

While recording

Press [¥, VHS REC] to select the recording time.

≥On the main unit, press [¥, REC].

Unit’s Display

Each time you press the button:

Counter (cancel) # 0:30 # 1:00 # 1:30

^------- 4:00 ! 3:00 ! 2:00 !--------}

For your reference

≥This does not work during timer recording.

≥Recording stops and the set time is cleared if you press [∫,STOP].

≥The set time is cleared if you change the recording mode or

channel while recording is paused.

[1] Press [TV/VIDEO] to change the input mode to

“TV”.

[2] Press TV’s [CH, W, X] to select the desired TV

channel.

For your reference

≥You can also do this if the unit is making a timer recording.

≥The recording is unaffected.

You can watch play or record discs while recording. The recording

will not be affected.

≥DVD playback (l 21)

≥DVD recording (l 26)

When a tuner channel is being recorded on VHS, you can only

record the same channel on DVD.

Recording TV programs

Tape speed

SP: You can record the length shown on the tape.

EP: Three times the length of SP mode.

VP: Five times the length of SP mode.

≥To have a longer recording capacity, select “EP” or “VP”.

≥If the image quality is important to you or if you wish to store the

tape for a long period, select “SP”.

≥This unit can play tapes recorded with LP mode on other

equipment (“LP” lights on the display).

VP mode:

≥“VP” flashes on the unit’s display for 8 seconds after recording

has started.

≥A tape recorded in VP mode by this unit cannot be played

back by other VCRs. It is recommended to distinguish it from

other tapes by indicating “VP” on the tape label, etc.

≥It takes more time for automatic tracking to work when playing

tapes recorded with VP mode, and it may not work at all with

some tapes. Do tracking manually if this is the case (l 50).

Watching the TV while recording

Playing/Recording DVD while recording

VHS

PP-Sample.book 51 ページ２００４年３月８日　月曜日　午後６時３分

Timer Recording

You can enter up to 16 programs up to a month in advance.

Preparation

≥Select the unit viewing channel (or the AV input) on the TV.

≥Check that the clock is set to the correct time. If it has not been set,

refer to page 46.

≥Insert a video cassette with an intact erasure prevention tab.

(l 48)

≥Press [VHS].

Entering the PlusCode numbers is an easy way of timer recording.

You can find these codes in TV listings in newspapers and

magazines.

≥When connecting a cable TV box or satellite receiver, the VCR

Plusi system does not work. Program the timer recording

manually (l right).

[1] Press [VCR Plus_].

[2] Press the numeric buttons to enter the

PlusCode

number.

≥Press [2] to move back to correct a digit.

[3] Press [ENTER].

Confirm the program

and correct it if

necessary using [3,

4, 2, 1]. (l right,

step 3).

≥“INVALID ENTRY” is displayed when you enter the wrong

PlusCode number. Reenter the PlusCode number.

[4] If the program is correct

Press [ENTER].

≥“ ” lights on the unit’s display.

[5] Press [RETURN].

≥When connecting a cable TV box or satellite receiver, select the

channel on the cable TV box or satellite receiver before timer

recording starts.

[1] Press [PROG/CHECK].

≥Make sure “NEW TIMER PROGRAM” is selected.

[2] Press [ENTER].

[3] Use [1] to move

and change the

items with

[3, 4].

≥You may use the

numeric buttons to

enter “CH”, “DATE”, “ON” and “OFF”.

≥CH (Program Position/TV Station Name)

≥DATE

You can also make a daily or weekly program.

≥ON (start time)/OFF (finish time)

The time increases or decreases in 30-minute increments if

you hold down the button.

≥Tape speed

You can also press [REC MODE] to change the recording

mode.

SP,.EP,.VP,.A°,.SP... (l 51)

° Auto SP/EP mode (l 53)

[4] Press [ENTER] when you have finished making

changes.

≥“ ” lights on the unit’s display.

≥To continue programming:

Select “NEW TIMER PROGRAM” and repeat steps 2–4.

[5] Press [RETURN].

Note

≥“ ” and “1” flashes when the unit cannot perform timer

recording (e.g., video cassette with no prevention tab or no video

casette in the cassette compartment).

≥The actual time recorded may be longer than the program itself

when TV programs are recorded using VCR Plus_ system.

≥If you set “DST” (Daylight Saving Time) to “ON” when manually

setting the clock (l 46), timer recording may not work when

summer switches to winter and vice versa.

∫To stop recording while a program is working

Press [∫, STOP], then [ENTER] within 5 seconds.

≥You can also press and hold [∫] on the main unit for more than 3

seconds to stop recording.

∫Caution for Timer recording

Timer recording automatically starts at the set time.

≥Timer recording can be started whether the unit is turned on or

off. When the unit is turned off, the sound and the video cannot

be outputted to the TV.

Using VCR Plus_ system

VHS

RETURN

VCR Plusi

PROG/CHECK

REC MODE

∫

3, 4, 2, 1

ENTER

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

POWER

TIME SLIP

CHAPTER

JET REW

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

DVD ERASE

VCR Plus+

OUTPUT

Numeric

Buttons

VCR Plus+

R 2 : 00 SP

10/13 WE 10:12 AM

s s s s s s s s

TIMER

PROGRAM

R 2 : 00 SP

10/13 WE 10:12 AM

CH DATE ON OFF

13WE

10:12 AM

10:30 AM

Manual programming

CH DATE ON OFF

25 13WE 10:12 AM 10:30 AM S P

NEW TIMER PROGRAM

Highlighted line

is ready for

programming.

TIMER

PROGRAM

R 2 : 00 SP

10/13 WE 10:12 AM

CH DATE ON OFF

ssss

s : ss

s s

TIMER

PROGRAM

R 2 : 00 SP

10/13 WE 10:12 AM

CH DATE ON OFF

6:00 PM

7:00 PM

VHS

PP-Sample.book 52 ページ２００４年３月８日　月曜日　午後６時３分

Timer Recording

If, at the beginning of a timer program, there is not enough tape

remaining to complete the recording, the SP/EP function will

automatically run the tape at EP speed. This ensures that the entire

program will be recorded. If EP mode is not enough to stretch the

remaining tape to fit the whole program you will not be able to record

all of the TV program.

≥It is not possible to automatically activate VP mode.

≥The tape length must be set correctly. (l 56)

≥Some tapes may not work correctly.

≥If the tape speed changes from SP to EP during a timer recording,

some brief picture distortion occurs at that point.

≥Even when the unit is turned off, you can display the timer

recording list by pressing [PROG/CHECK].

Preparation

≥Press [VHS].

[1] Press [PROG/CHECK].

[2] Press [3, 4] to select the program.

[3] Press [CANCEL/RESET, ¢] to delete,

You cannot delete programs that are currently recording.

or press [ENTER] to change.

The timer recording setting screen appears.

[4] If you pressed [ENTER] in step 3,

Use [3, 4, 2, 1] to change and press [ENTER].

[5] Press [RETURN].

For your reference

≥Programs that failed to record are not deleted from the list

immediately, but are deleted from the list automatically at 4 a.m.

two days later.

Timer recording for TV programs cannot be executed on both DVD

and VHS at the same time.

Make sure the timer recording start times do not overlap on both

DVD (l 29) and VHS (l left) timer-programming screens.

When the timer recording settings overlap:

≥When the start time of both timer recordings is the same, the timer

recording of DVD has priority.

≥When tuner channels are specified in timer recordings on both VHS

and DVD, only one timer recording can be started.

≥When the interval between the first timer recording and the second

timer recording on DVD is 1 minute or less as shown below, the

second timer recording on DVD has priority over the timer

recording on VHS even if its start time is later than the timer

recording on VHS.

Auto SP/EP mode

Check, change or delete programs

Timer programming

Video tape

1st program

(30 min.)

30 min. at SP

2nd program (60 min.)

15 min.

at SP

45min.

at EP

CH DATE ON OFF

6 SA 6:00 PM 7:00 PM S P

25 13WE 10:12 AM 10:30 AM S P

NEW TIMER PROGRAM

Cautions for using timer recording on

DVD and VHS

1 minute

4 CH

10 CH

2 CH

VHS

DVD

VHS

PP-Sample.book 53 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

Preparation

≥Select the unit viewing channel (or the AV input) on the TV.

≥Press [VHS].

This unit can display a list of the recorded programs on the inserted

tape on the TV screen. You can then select the desired program, and

this unit will quickly reach its beginning and start playback.

Preparation

≥The tape length of the inserted tape must be set correctly. (l 56)

≥The unit must not be in timer recording.

≥A program of at least 15 minutes must be recorded on the tape.

[1] Press [VHS MENU] to display the VHS MENU.

[2] Press [3, 4] to select “DIRECT NAVIGATOR”

and then select “ON” with [2, 1].

[3] Record programs

(l 51, 52).

The unit makes the list as you record.

[1] Press [DIRECT

NAVIGATOR].

≥When [DIRECT

NAVIGATOR] is

pressed during play,

playback stops and

the Direct Navigator

list appears.

[2] Press [DIRECT NAVIGATOR] several times to

select the program.

≥Every time you press [DIRECT NAVIGATOR], the highlight

moves upwards.

≥After 3 seconds, the unit starts to search for the beginning of

the selected program and playback will start automatically.

∫To cancel the Direct Navigator list

Press [VHS MENU].

∫To delete the Direct Navigator data of a single video

cassette tape

Keep [CANCEL/RESET, ¢] pressed for more than 5 seconds while

the Direct Navigator list appears.

“- -” appears on the list.

∫To delete all the Direct Navigator data stored in the

unit’s memory

(l 56)

∫To Demonstrate the Direct Navigator Function

Keep [DIRECT NAVIGATOR] pressed for more than 5 seconds

without inserting a video cassette.

Direct Navigator

∫ To save Direct Navigator data

VHS

VHS MENU

DIRECT NAVIGATOR

∫

3, 4, 2, 1

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

POWER

TIME SLIP

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

VCR Plus+

OUTPUT

:, 9

VHS MENU

OSD ¥ ON OFF

TAPE SELECT

¥ T120 T160 T180

BLUE BACK

¥ ON OFF

DIRECT NAVIGATOR

¥ ON OFF

DELETE NAVIDATA

¥ NO YES

JET SEARCH t 27

¥ t 35

SELECT

END

: j/i

: MENU

∫ Selecting programs to play

DIRECT NAVIGATOR

1 10/18 10:30 PM MUSIC

124 10/19 3:00 PM SPORT

5 10/21 10:15 AM

A2 10/25 8:30 PM

3 10/27 9:30 AM EDUCA

CH DATE ON CATEGORY

VHS

PP-Sample.book 54 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

You can find what kind of

programs are recorded

with the character and the

icon indicators.

Preparation

≥Press [VHS].

[1] Press [DIRECT

NAVIGATOR].

[2] Press [DIRECT

NAVIGATOR]

several times to

select the program and press [1].

[3] Press [3, 4, 2, 1]

to select the desired

category.

[4] Press [VHS MENU].

Note:

≥The Direct Navigator list is stored on each tape. Up to 20 tapes and

50 programs can be registered.

≥The Direct Navigator program list displays up to 14 programs. If you

have already stored 14 programs on a tape and then store another

one, the oldest item is replaced.

≥Signals approximately 10 seconds before and after the current tape

position are checked. During checking, “CHECKING DIRECT

NAVIGATOR DATA.” is displayed on the TV screen.

≥Checking cannot be performed properly where there are no

signals, such as unrecorded portions of the tape. In this case, press

[DIRECT NAVIGATOR] at a portion of the tape where a program

has been recorded on this unit. When a signal still cannot be found,

the message “CAN NOT FIND DIRECT NAVIGATOR DATA.”

appears on the TV.

≥“REMAINING PROGRAM 0 DELETE DIRECT NAVIGATOR

DATA.” appears when you try to store more than 50 programs. The

new item is added and the oldest item is deleted.

≥“REMAINING CASSETTE 0 FOR DIRECT NAVIGATOR DELETE

DIRECT NAVIGATOR DATA.” appears when you try to store items

for more than 20 tapes. Programs recorded without deleting data

as instructed are not registered in the list.

≥The list does not appear when playing tapes recorded on other

equipment.

≥When recording over the same location on a tape, it may not work

correctly.

When playback starts after searching with the Direct Navigator

function or the index search function, recorded programming data

(called Time Stamp) appears on the TV screen for approx.

5 seconds.

Preparation

≥Display the unit’s picture on the TV.

≥Press [VHS].

≥Be sure to set “OSD” in the “VHS MENU” to “ON”. (l 56)

On Screen Display

Note:

≥Time Stamp may not appear if the beginning of the Direct Navigator

data is not recorded 25 minutes before and after the current tape

position even when index signals are recorded.

This unit automatically records special index signals on the tape

every time a recording is started. The index search function makes

use of these index signals to let you find the beginning of a desired

program quickly and easily.

Preparation

≥Display the unit’s picture on the TV.

≥Press [VHS].

≥Insert a recorded video cassette.

While stopped or during normal play

Press [: ] or [ 9].

≥Each press increases the number of skips.

∫To cancel the Index Search or to stop playback

Press [∫, STOP].

Note:

≥Up to 20 index signals can be searched for in both directions.

≥When you press either one of the button too much, you can control

the number of skips by pressing the opposite button.

≥The figure on the display decreases by 1 each time an index signal

is located.

≥This feature may not work correctly if the marks are too close

together. Make recordings of at least 5 minutes.

∫ Set the category

Category Indicator Icon

MOVIE MOVIE

MUSIC MUSIC

DRAMA DRAMA

EDUCATION EDUCA

DOCUMENTARY DOCUM

SPORTS SPORT

CHILDREN CHILD

NEWS NEWS

OTHERS OTHER

END : MENU

CATEGORY SETTING

≥MOVIE

≥MUSIC

≥DRAMA

≥EDUCA

≥DOCUM

≥SPORT

≥CHILD

≥NEWS

≥OTHER

≥

–––––

SELECT:

To Check the Recorded Programming

Data (Time Stamp Function)

VHS Index Search System (VISS)

∫Index signals are recorded in the following cases.

≥When a recording is started by pressing [¥, VHS REC].

≥When timer recording is activated.

CH 2

10/26. TH ON

8:02

VHS

PP-Sample.book 55 ページ２００４年３月８日　月曜日　午後６時３分

Various Settings

Preparation

≥Press [VHS].

[1] While stopped

Press [VHS MENU].

[2] Use [3, 4] to select a desired item.

[3] Use [2, 1] to change the setting.

∫To exit the settings screen

Press [VHS MENU]

This description shows the initial settings for this unit. For

details on menu operation (l left).

≥Underlined items are the factory presets.

∫VHS MENU

OSD

(l 57)

[ON

] [OFF]

TAPE SELECT

Set the length of tape you are using so the unit can show the correct

remaining time.

[T120

] [T160] [T180]

[T120

]: T30, T60, T90 and T120 tapes

[T160]: T140 and T160 tapes

[T180]: T180 tapes

BLUE BACK

[ON] [OFF]

DIRECT NAVIGATOR (l 54)

[ON] [OFF

]

DELETE NAVIDATA

Delete all the Navigation data registered in the unit.

≥To delete data on a single tape (l 54).

[NO

] [YES]

[YES]: Then press [ENTER] when you want to delete all the

Direct Navigator data.

JET SEARCH (l 49)

Set the speed for JET SEARCH when playing EP and VP tapes.

≥It is possible to view the picture recorded in EP or VP mode at

approx. 27 or 35 times speed.

[k27] [k

35]

[k27]: Select [k27] if the picture is poor at [k35]

Changing the unit’s settings

∫ Common procedures

VHS

VHS MENU

AUDIO

RETURN

3, 4, 2, 1

ENTER

STATUS

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

POWER

TIME SLIP

CHAPTER

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

DVD ERASE

VCR Plus+

OUTPUT

VHS MENU

SELECT

END

: j/i

: MENU

OSD ¥ ON OFF

TAPE SELECT

¥ T120 T160 T180

BLUE BACK

¥ ON OFF

DIRECT NAVIGATOR ON

¥ OFF

DELETE NAVIDATA

¥ NO YES

JET SEARCH t 27

¥ t 35

Summary of settings

ON Messages appear on the TV for about 5 seconds after

you perform operations.

≥The on screen display will always appear on the TV

screen during rewind, Jet Rewind and fast forward.

OFF Messages do not appear.

ON The screen shows a blue background when you play

unrecorded portions.

Off The blue background function is deactivated.

ON Direct Navigator data automatically registered.

OFF Data not registered.

VHS

PP-Sample.book 56 ページ２００４年３月８日　月曜日　午後６時３分

Various Settings

To see these displays, set the “OSD” item in the “VHS MENU” to

“ON” (l 56).

Press [STATUS].

The time and operation details appear on the screen for about 5

seconds.

Note:

≥These displays do not appear when paused or during slow play.

≥The on-screen display may be distorted depending on the playback

tape or the input signal.

When a stereo and/or SAP broadcast is received, “STEREO” or

“SAP” light to show the type of broadcast.

∫When playing a tape:

To change the audio, press [AUDIO].

The audio changes as follows:

Stereo>L>R>Normal audio track>Stereo

∫While watching TV:

You cannot change audio.

When a stereo broadcast or SAP broadcast is recorded and played

back on this unit, stereo sound will be automatically selected in the

case of a stereo broadcast and SAP sound will be automatically

selected in the case of a dual-sound broadcast (Mono and SAP or

Stereo and SAP).

≥The wrong choice may be made if the program is played back from

an interim point. (In a case like this, press [AUDIO] and select the

right sound only in playback.)

≥The function will not work with a cassette which has been recorded

using external equipment.

Preparation

≥Press [VHS].

Various on-screen display indications

1 Channel display

2 STEREO/SAP indication

Indicates when a program is broadcast in stereo or SAP.

3 L and R indicators (appears only in playback)

The Left (L) and Right (R) indicators show which sound mode

is selected as follows:

Stereo: Both the L and R indicators appear.

L: The L indicator appears.

R: The R indicator appears.

Normal: Neither the L nor R indicator appears.

4 Operation status display

5 Shows the time and tape counter

Pressing [STATUS] once makes the on-screen display

appear. After that, press the button repeatedly to change the

display as follows:

Present time>Tape counter>Remaining tape

time>Present time

during Index search: “S 01” to “S 20” is displayed.

during Jet Rewind: “J. REW” is displayed.

≥Press [CANCEL/RESET, ¢] to reset the tape counter

(elapsed time) to “0:00.00”.

The tape counter is automatically reset to “0:00.00” when

inserting a video cassette.

≥The remaining time is approximate. It will be incorrect if you

set the wrong tape time in the “TAPE SELECT” item in the

“VHS MENU” and if the tape is of poor quality.

6 Cassette-in indicator

Shows whether you have loaded a video cassette.

7 Tape speed indicator (l 51)

CH 1

STEREO

L R

0:00.22

;¥ SP 1

123 4 5

Changing audio

Auto Bilingual Choice Function

VHS

PP-Sample.book 57 ページ２００４年３月８日　月曜日　午後６時３分

[[DVD/VHS]]

Advanced Operations

[RAM] [DVD-R]

You can transfer (dubbing) programs recorded on a tape onto a disc°

with one stroke of the button.

In One-Touch Dubbing, programs are automatically dubbed onto the

disc from the location of playback on the tape.

° Available discs for transfer (dubbing) from tape are DVD-RAM and

non-finalized DVD-R.

Preparation

≥Select the unit viewing channel (or the AV input) on the TV.

DVD

≥Release protection (disc l 30, cartridge l 18). [RAM]

≥Insert a disc and confirm there is sufficient empty space for

recording on it. (l 20, 47)

≥Select the recording mode.

≥When SAP broadcast program is played back on VHS, the audio

on DVD is recorded according to the settings in “Select MTS” in the

initial settings. (l 44) [DVD-R]

VHS

≥Insert the video cassette containing the program to be copied

(l 48).

[1] While both DVD/VHS are stopped,

Press and hold [“ DVD, DUBBING] for 3 seconds

or more.

On the main unit, press [“ DVD].

≥Check if transfer (dubbing) starts properly.

≥The “DUBBING” indicator on the main unit lights.

≥Dubbing is automatically completed when the tape reaches its

end or the disc becomes full.

∫To stop transfer (dubbing) halfway through

Press [∫, STOP].

≥When transfer (dubbing) is completed, a message indicating the

end of transfer (dubbing) appears on the TV screen and then

disappears a few seconds later.

∫When transfer (dubbing) is started, the following

operations also start automatically

≥“OSD” on VHS MENU ) “OFF” (l 56)

≥Recording channel indicator on DVD ) “TP”

≥Output to TV ) DVD output

∫Only the following operations are allowed while

transfer (dubbing)

≥Stopping transfer (dubbing) by pressing [∫, STOP].

Note:

≥While One Touch Transfer (Dubbing) is activated, a timer recording

cannot be started.

≥When “DVD/VHS Output” is set to “Manual” (l 43), or when VHS

output is selected in starting transfer (dubbing), the output is

switched to DVD automatically at the time when transfer (dubbing)

is started.

When the transfer (dubbing) is already started, you cannot switch

the output manually.

≥When the transfer (dubbing) is not started or not executed, the

“DUBBING” indicator blinks for about 7 seconds. Check if the unit is

properly prepared.

≥When a Copy-guarded tape is inserted, a message appears on the

display and the recording stops on the spot.

≥If a part of the tape recorded in VP mode is dubbed to disc, noises

may appear at the beginning of the dubbed part.

Transfer (Dubbing) from VHS

VHS

DVD

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

TIME SLIP

CHAPTER

JET REW

STATUSDISPLAY

DVD ERASE

SKIP/INDEX

SLOW/

REW

PLAY

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

POWER

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

DVD/VHS POWER

VCR Plus+

OUTPUT

REC MODE

;

∫

CH, W, X

µ, DVD REC

“ DVD

OPEN/CLOSE

TIME SLIP

REC

/k1.3

DUBBING

VHS

DVD

DUBBING indicator

∫ One Touch Transfer (Dubbing) (VHS l DVD)

∫Dividing a title to be dubbed

In One-Touch Transfer (Dubbing) from VHS to DVD, the title is

divided by index signal detected and then recorded. You can

search desired titles with Direct Navigator’s Title View (l 33)

after transfer (dubbing) to DVD.

≥Titles recorded within 15 minutes (25 minutes in VP mode) of

each other may not be divided properly.

≥The recording time may become longer than the original title

depending on the number of index signals.

VHSDVD

PP-Sample.book 58 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

[RAM] [DVD-R]

You can specify the position to start transfer (dubbing) of the

program recorded on the tape to the disc.

≥Available discs for transfer (dubbing) from tape are DVD-RAM and

non-finalized DVD-R.

≥Copy-guarded video tapes cannot be dubbed. Most video tapes are

copy-guarded to prevent illegal reproduction and they cannot be

recorded with the following procedure.

Preparation

≥Select the unit viewing channel (or the AV input) on the TV.

DVD

≥Release protection (disc l 30, cartridge l 18). [RAM]

≥Insert a disc and confirm there is sufficient empty space for

recording on it. (l 20, 47)

VHS

≥Insert the video cassette containing the program to be copied

(l 48).

≥Check the channel. If “DC” channel is selected, transfer (dubbing)

does not work properly.

When the “DC” channel is selected on VHS, you cannot select the

“TP” channel.

[1] Press [VHS] and press [1, PLAY].

Start playing the video cassette and find the recording start point.

≥Select the audio to be played (the audio to be recorded)

beforehand.

[2] Press [;, PAUSE] at the start point of the

recording.

[3] Press [DVD].

[4] Select “TP” channel with [CH, W, X].

≥The VHS picture is displayed on the TV.

[5] Press [REC MODE] to select the recording

mode.

[6] Press [¥, DVD REC].

≥Disc recording and VHS play start at the same time.

∫When transfer (dubbing) is started, the following

operations also start automatically

≥“OSD” on VHS MENU ) “OFF” (l 56)

∫Only the following operations are allowed while

transferring (dubbing)

≥Turning the unit off/on

≥Stopping transfer (dubbing) by pressing [STOP]

Note:

≥When the transfer (dubbing) is already started, you can switch the

output manually.

≥When a Copy-guarded tape is inserted, the message appears on

the display and the recording stops on the spot.

≥If a part of the tape recorded in VP mode is dubbed to disc, noises

may appear on the beginning of the dubbed part.

∫ Manual Transfer (Dubbing)

To pause or stop Manual Transfer (Dubbing)

You cannot stop or pause on DVD and VHS at the same time

∫To pause or stop recording

Press [DVD] and press [;, PAUSE] or [∫, STOP].

∫To pause or stop play

Press [VHS] and press [;, PAUSE] or [∫, STOP].

∫About TP channel

(TP: Dubbing input channel)

≥TP channel can be recorded only when the DVD input channel

is set to “TP”.

≥When you play back a tape turning the channel to “TP”, the

picture on VHS is displayed on the TV screen.

VHSDVD

PP-Sample.book 59 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

You can transfer (dubbing) programs recorded on a disc° onto a tape

with one stroke of the button.

In One-Touch Dubbing, all contents on the disc are automatically

dubbed onto the tapes.

° Available discs for transfer (dubbing) onto tape are DVD-RAM and

non-finalized DVD-R. Most DVD videos cannot be dubbed

because they are copy-guarded.

Preparation

≥Select the unit viewing channel (or the AV input) on the TV.

DVD

≥Insert the disc containing the program to be copied (l 20).

VHS

≥Insert a video cassette with an intact erasure prevention tab.

(l 48)

≥Confirm that the remaining tape time is sufficient for recording.

(l 57)

≥Select the recording mode.

[1] While both DVD/VHS are stopped,

Press and hold [VHS —, DUBBING] for 3 seconds

or more.

On the main unit, press [VHS —].

≥Check if transfer (dubbing) starts properly.

≥The [DUBBING] indicator on the main unit lights.

≥Dubbing is automatically completed when playback of the disc

is finished or the tape reaches its end.

∫To stop transfer (dubbing) halfway through

Press [∫, STOP].

≥When transfer (dubbing) is completed, a message indicating the

end of transfer (dubbing) appears on the TV screen and then

disappears a few seconds later.

∫When transfer (dubbing) is started, the following

operations also start automatically:

≥“Status Messages” on Display ) “Off” (l 45)

≥Recording channel indication on VHS ) “DC”

≥Output to TV ) VHS output

≥Audio output when playing back DVD ) Stereo (L R) [RAM]

∫Only the following operations are allowed while

transfer (dubbing):

≥Stopping transfer (dubbing) by pressing [∫, STOP].

Note:

≥While One Touch Transfer (Dubbing) is activated, timer recording

cannot be started.

≥When “DVD/VHS Output” is set to “Manual” (l 43), or when DVD

output is selected in starting transfer (dubbing), the output is

switched to VHS automatically at the time when transfer (dubbing)

is started.

When the transfer (dubbing) is already started, you cannot switch

the output manually.

≥When the transfer (dubbing) is not started or not executed, the

“DUBBING” indicator blinks for about 7 seconds. Check if the unit is

properly prepared.

≥If you start transfer (dubbing) when “PB” is blinking on the unit’s

display, the DVD is dubbed from the beginning of the title which

you stopped.

Transfer (Dubbing) from DVD

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

TIME SLIP

CHAPTER

JET REW

STATUSDISPLAY

DVD ERASE

VHS

DVD

SKIP/INDEX

SLOW/

REW

PLAY

POWER

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

DVD/VHS POWER

VCR Plus+

OUTPUT

REC MODE

;

∫

CH, W, X

µ, VHS REC

VHS —

:, 9

OPEN/CLOSE

TIME SLIP

REC

/k1.3

DUBBING

VHS

DVD

DUBBING indicator

∫ One Touch Transfer (Dubbing) (DVD l VHS)

∫About Recording VISS (l 55)

In One-Touch Dubbing from DVD to VHS, the index signal is

automatically recorded for each title. You can search desired

titles with [: ] or [ 9].

VHSDVD

PP-Sample.book 60 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

You can specify the position to start transfer (dubbing) of the

program recorded on the disc to the tape.

≥Copy-guarded discs cannot be dubbed. Most discs are copy-

guarded to prevent illegal reproduction and they cannot be

recorded with the following procedure.

Preparation

≥Select the unit viewing channel (or the AV input) on the TV.

DVD

≥Insert the disc containing the program to be copied (l 20).

≥Check the channel. If “TP” channel is selected, transfer (dubbing)

does not work properly.

When the “TP” channel is selected on DVD, you cannot select the

“DC” channel.

VHS

≥Insert a video cassette with an intact erasure prevention tab.

(l 48)

≥Confirm that the remaining tape time is sufficient for recording.

(l 57)

[1] Press [DVD] and press [1, PLAY].

Start playing the disc and find the recording start point.

≥Select the audio to be played (the audio to be recorded)

beforehand. [RAM]

≥When the DVD-R is inserted, you cannot select the audio.

[2] Press [;, PAUSE] at the start point of the

recording.

[3] Press [VHS].

[4] Select “DC” channel with [CH, W, X].

≥The DVD picture is displayed on the TV.

[5] Press [1, PLAY].

Start playing the video cassette and find the recording start point.

[6] Press [;, PAUSE] at the start point of the

recording, then press [¥, VHS REC] to pause.

Put the unit in the recording standby mode.

[7] Press [REC MODE] to select the recording

mode.

[8] Press [;, PAUSE].

≥VHS recording and disc play start at the same time.

∫When transfer (dubbing) is started, the following

operations also start automatically:

≥“Status Messages” on Display ) “Off” (l 45)

≥Audio output when playing back DVD ) Stereo (L R)

∫Only the following operations are allowed while

transfer (dubbing):

≥Turning the unit off/on

≥Stopping transfer (dubbing) by pressing [STOP]

Note:

≥When the transfer (dubbing) is already started, you can switch the

output manually.

∫ Manual Transfer (Dubbing)

To pause or stop Manual Transfer (Dubbing)

You cannot stop or pause on DVD and VHS at the same time

∫To pause or stop recording

Press [VHS] and press [;, PAUSE] or [∫, STOP].

∫To pause or stop play

Press [DVD] and press [;, PAUSE] or [∫, STOP].

∫About DC channel

(DC: Dubbing input channel)

≥DC channel can be recorded only when the VHS input

channel is set to “DC”.

≥When you play back a tape with the channel set to “DC”, the

DVD picture is displayed on the TV screen.

VHSDVD

PP-Sample.book 61 ページ２００４年３月８日　月曜日　午後６時３分

Advanced Operations

When connecting to the L2 input terminals on the front of the unit

≥You can also connect to the L1 input terminals on the rear of the unit.

Before connecting any cables, first make sure that the power for

both units is off. Then, after connecting cables, turn on both units.

Note

≥When recording using this unit’s input terminals, only the sound

received at the time of recording will be recorded. As long as

secondary audio that is recorded on the media in the external device

is not output to the unit in play, it is not recorded.

≥If the audio output of the other equipment is monaural, connect to L/

MONO. (Both left and right channels are recorded when connected

through L/MONO.)

≥The S-VIDEO terminal achieves a more vivid picture than the VIDEO

terminal.

Preparation

DVD [RAM] [DVD-R]

≥Release protection (disc l 30, cartridge l 18). [RAM]

≥Press [DVD].

VHS

≥Insert a video cassette with an intact erasure prevention tab. (l 48)

≥Press [VHS].

[1] Press [REC MODE] to select the recording mode.

(DVDl 27, VHSl 51)

≥DVD [RAM] [DVD-R]

- It is also possible to perform Flexible Recording (FR). (l 27)

[2] While stopped

Press [CH, W, X] or [INPUT SELECT] to select the

input channel.

≥Select L1 or L2.

[3] Start play on the other equipment.

[4] Press [¥, DVD REC] at the point where you want

to start recording.

[3] Press [1, PLAY].

Start playing the video cassette and find the recording start point.

[4] Press [;, PAUSE], then press [¥, VHS REC].

Put the unit in recording standby mode.

[5] Start play on the other equipment.

[6] Press [;, PAUSE] at the point where you want

to start recording.

∫To skip unwanted parts

Press [;, PAUSE] to pause recording. (Press again to restart recording.)

∫To stop recording

Press [∫, STOP].

For your reference

≥Almost all videos and DVD software on sale have been treated to prevent illegal copying. Such software cannot be recorded.

Recording from an external device

PULL OPEN

EJECT

POWER

Í/I

VIDEO IN L/MONO

–

AUDIO IN

–

S-VIDEO IN

VHS DVD

(2)

(1)

(3)

(1) Audio/Video cable (not supplied)

A Yellow (VIDEO)

B White (L)

C Red (R)

(2) S video cable (not supplied)

(3) Other playback equipment

VHS

DVD

REC MODE

INPUT SELECT

SKIP/INDEX

SLOW/

REW

PLAY

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

TIME SLIP

CHAPTER

JET REW

STATUSDISPLAY

DVD ERASE

POWER

CANCEL/RESET

VOLUME

INPUT SELECT

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

DVD/VHS POWER

VCR Pl

OUTPUT

;

∫

CH, W, X

µ, VHS REC

µ, DVD REC

1 DVD 1 VHS

VHSDVD

PP-Sample.book 62 ページ２００４年３月８日　月曜日　午後６時３分

Helpful Hints

Bitstream

This is the digital form of multi-channel audio data (e.g., 5.1 channel)

before it is decoded into its various channels.

CPRM (Content Protection for Recordable Media)

CPRM is technology used to protect broadcasts that are allowed to

be recorded only once. Such broadcasts can be recorded only with

CPRM compatible recorders and discs.

Dynamic range

Dynamic range is the difference between the lowest level of sound

that can be heard above the noise of the equipment and the highest

level of sound before distortion occurs. Dynamic range compression

means reducing the gap between the loudest and softest sounds.

This means you can listen at low volumes but still hear dialog clearly.

Film and video

DVD-Videos are recorded using either film or video. This unit can

determine which type has been used, then uses the most suitable

method of progressive output.

≥Film is 24 or 30 frames per second, with motion picture film

generally being 24 frames per second.

≥Video is 60 fields per second (two fields making up one frame).

Finalize

A process that makes play of a recorded CD-R, CD-RW, DVD-R etc.

possible on equipment that can play such media. You can finalize

DVD-R on this unit.

Formatting

Formatting is the process of making media such as DVD-RAM

recordable on recording equipment.

You can format DVD-RAM on this unit.

Formatting irrevocably erases all recordings on the disc.

Frame and field

Frame refers to the single images that constitute the video you see

on your TV. Each frame consists of two fields.

Frame Field Field

≥A frame still shows two fields, so there may be some blurring, but

picture quality is generally better.

≥A field still shows less picture information so it may be rougher, but

there is no blurring.

Linear PCM (LPCM)

These are uncompressed digital signals. CDs are recorded with 44.1

kHz/16 bit PCM, while DVDs use PCM between 48 kHz/16 bit and 96

kHz/24 bit, allowing playback with greater quality sound.

The linear PCM signals output from the DIGITAL AUDIO OUT

OPTICAL terminal are stereo (2 channel).

LPCM sound is available when recording in XP mode.

MP3 (MPEG Audio Layer 3)

An audio compression method that compresses audio to

approximately one tenth of its size without any considerable loss of

audio quality. You can play MP3s you have recorded onto CD-R and

CD-RW.

Pan & Scan/Letterbox

In general, DVD-Video are produced with the intention that they be

viewed on a widescreen TV (16:9 aspect ratio), so images often

don’t fit regular (4:3 aspect ratio) TVs. Two styles of picture,

“Pan & Scan” and “Letterbox”, deal with this problem.

Pan & Scan: The sides are cut off so the picture fills the screen.

Letterbox: Black bands appear at the top and bottom of the

picture so the picture itself appears in an aspect ratio

of 16:9.

Playback control (PBC)

If a Video CD has playback control, you can select scenes and

information with menus.

(This unit is compatible with version 2.0 and 1.1.)

Progressive/Interlace

NTSC, the video signal standard, has 480 interlaced (I) scan lines,

whereas progressive scanning uses twice the number of scan lines.

This is called 480P.

Using progressive output, you can enjoy the high-resolution video

recorded on media such as DVD-Video.

Your TV must be compatible to enjoy progressive video.

Protection

You can prevent accidental erasure by setting writing protection or

erasure protection.

Sampling frequency

Sampling is the process of converting the heights of sound wave

(analog signal) samples taken at set periods into digits (digital

encoding). Sampling frequency is the number of samples taken per

second, so larger numbers mean more faithful reproduction of the

original sound.

VBR (Variable Bitrate)

This is a method of video recording that adjusts the bit rate according

to video signal.

Title/Chapter (DVD-Video)

DVD-Video are divided into large sections (titles) and smaller

sections (chapters). The numbers allocated to these sections are

called title numbers and chapter numbers.

Example

(1) Title 1

(2) Title 2

(3) Chapter 1

(4) Chapter 2

(5) Chapter 3

Track

This is the smallest division on CD and Video CD.

Example

(1) Track 1

(2) Track 2

(3) Track 3

(4) Track 4

(5) Track 5

Glossary

(1)

(2)

(3)

(4)

(3)

(4)(5)

(1) (2) (3) (4) (5)

VHSDVD

PP-Sample.book 63 ページ２００４年３月８日　月曜日　午後６時３分

Helpful Hints

Set up Page

Disc Page

Recording Page

Frequently asked questions

What equipment is necessary to

play multi channel surround

sound?

≥DVD-Video:

You can play DVD-Video multi channel surround by digitally connecting an amplifier

equipped with a Dolby Digital and a DTS decoder.

≥DVD-Audio:

This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound.

–

Are the headphones and speakers

directly connected to the unit?

≥You cannot directly connect to the unit. Connect through the amplifier etc.

The TV has both S-VIDEO IN

terminal and COMPONENT VIDEO

IN terminals. Which terminal should

I connect with?

≥We recommend the COMPONENT VIDEO IN terminal. Component signal outputs the

color difference signals (P

B/PR) and luminance signal (Y) separately in order to achieve

high fidelity in reproducing colors. If the TV is compatible with progressive output, a high

quality picture can be output because this unit’s component video output terminal outputs

a progressive output signal.

Is my TV progressive output

compatible?

≥All Panasonic TV that have 480P input terminals are compatible. Consult the

manufacturer if you have another brand of TV.

–

Can I play DVD-Video, DVD-Audio

and Video CDs bought in another

country?

≥You can play them if the video standard is NTSC.

≥However, you cannot play DVD-Video if their region number does not include “1” or

“ALL”.

–

Can a DVD-Video that does not

have a region number be played?

≥The DVD-Video region number indicates the disc conforms to a standard. You cannot

play discs that do not have a region number.

–

Please tell me about DVD-R and

DVD-RW compatibility with this

unit.

≥This unit records and plays DVD-R. However, you cannot record onto DVD-R discs that

are finalized.

≥This unit also records and plays 1k–4k recording speed DVD-R discs.

≥This unit does not record or play DVD-RW.

Please tell me about CD-R and CD-

RW compatibility with this unit.

≥You can play CD-R and CD-RW on this unit that are created using a compatible format.

≥You cannot write to a CD-R or CD-RW with this unit.

18, 24

Can I record from a commercially

purchased video cassette or DVD?

≥Most commercially sold video cassettes and DVD are copy protected; therefore,

recording is usually not possible.

–

Can a DVD-R recorded on this unit

be played on other equipment?

≥You can play on DVD-R compatible players after finalizing the disc on this unit; however,

due to the condition of the recording, play may not be possible.

How many times can I write to a

DVD-RAM disc?

≥You can write to the disc approximately 100,000 times depending upon the conditions of

use.

–

Can I record digital audio signals

using this unit?

≥You cannot record digital signals. The digital audio terminals on this unit are for output

only.

–

Can a digital audio signal from this

unit be recorded to other

equipment?

≥You can record if using the PCM signal. When recording DVD, change the “Digital Audio

Output” settings to the following from the SETUP menu.

PCM Down Conversion “ON”

Dolby Digital “PCM”

DTS “PCM”

However, only

As long as digital recording from the disc is permitted.

As long as the recording equipment is compatible with a sampling frequency of 48 kHz.

≥You cannot record MP3 signals.

–

Can I switch to MTS during

recording?

≥With DVD-RAM, you can, and the audio recorded also changes. Just press [AUDIO].

≥With DVD-R, you cannot. Change before recording with the “Select MTS” in the SETUP

menu.

VHSDVD

PP-Sample.book 64 ページ２００４年３月８日　月曜日　午後６時３分

Helpful Hints

On the unit’s display Page

On the TV Page

On the unit’s display Page

On the TV Page

Error messages

∫ Common

H, F

(“” stands for a number.)

≥An error has occurred. The number following “H” or “F” depends on the status of the

unit.

Reset procedure:

Press [POWER Í/I] to switch the unit to standby mode and then back to ON.

Alternatively, press [POWER Í/I] to switch the unit to standby mode, disconnect the

AC power supply cord, and then reconnect it.

≥If the service numbers fail to clear, note the service numbers and contact a qualified

service person.

–

∫ DVD

Cannot finish recording completely. ≥The program was copy-guarded.

≥The disc may be full.

–

Cannot play. ≥You inserted an incompatible disc (Discs recorded in PAL video, etc.). –

Cannot record on the disc. ≥The disc may be dirty or scratched.

19Unable to format.

Please check the disc.

Cannot record. Disc is full. ≥Create space by erasing any unwanted titles. [RAM]

≥Use a new disc. [RAM] [DVD-R]

23, 33, 37

–

Cannot record. Maximum number

of titles exceeded.

Error has occurred. Please press

ENTER.

≥Press [ENTER] to start recovery process. You cannot operate the unit while it is

recovering (“SLF CHECK” appears on the unit’s display).

–

No disc. ≥You haven’t inserted a disc. Correctly insert a disc that this unit can play.

≥The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.

18, 20

Please change the disc. ≥There may be a problem with the disc. Press [<, OPEN/CLOSE] to remove it and

check it for scratches or dirt. (The unit turns off automatically after you open the tray.)

This is a non-recordable disc. ≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized

DVD-R.

≥You inserted an unformatted DVD-RAM. Format the disc with this unit.

–

This disc is not formatted properly.

≥The operation is prohibited by the unit or disc.

 CHK REMOTE

(“” stands for a number.)

≥The remote control and main unit are using different codes. Change the code on the

remote control or main unit.

HARD ERR ≥If there is no change after turning the unit on and off, consult the dealer where the unit

was purchased.

–

NO READ ≥The disc is dirty or badly scratched. The unit cannot record, play, or edit.

≥You have used a DVD-RAM/PD lens cleaner and it has finished. Press [<,OPEN/

CLOSE] to eject the disc.

PROG FULL ≥There are already 16 timer programs. Delete unnecessary timer programs. 29, 53

SLF CHECK ≥There was a power failure or the AC plug was disconnected while the unit was on. The

unit is carrying out its recovery process. Wait until the message disappears.

–

UNSUPPORT ≥You have inserted a disc the unit cannot play or record on. 19

U14 ≥The unit is hot.

The unit switches to standby for safety reasons. Wait for about 30 minutes until the

message disappears.

Select a position with good ventilation when installing the unit. Do not block the cooling

fan on the rear of the unit.

–

U99 ≥The unit fails to operate properly. Press [POWER Í/I] on the main unit to switch the

unit to standby. Now press [POWER Í/I] again to turn the unit on.

–

∫ VHS

PLEASE PUT IN A VIDEO

CASSETTE.

≥A video cassette is not inserted when recording programs or setting the timer

recording. Insert a video cassette with an intact erasure prevention tab.

PLEASE SET THE CLOCK ≥The clock is not set when recording programs or setting the timer recording. Set the

clock.

PLEASE USE A CASSETTE WITH

TAB.

≥A video cassette without the intact erasure prevention tab is inserted when recording

programs or setting the timer recording. Use a video cassette with an intact erasure

prevention tab.

VHSDVD

PP-Sample.book 65 ページ２００４年３月８日　月曜日　午後６時３分

Helpful Hints

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the

chart do not solve the problem, refer to the “Customer Services Directory” on page 71 if you reside in the U.S.A., or refer to “Product

information” on page 70 if you reside in Canada. In other areas, consult your dealer.

Power Page

Displays Page

Operation Page

Troubleshooting guide

The following do not indicate a problem with this unit:

≥Regular disc rotating sound. The sound of the disc rotating may become louder especially when finalizing a DVD-R.

≥Poor reception due to atmospheric condition.

≥Image disturbance during search.

≥Interruptions to reception due to periodic satellite broadcasting breaks.

∫ Common

No power ≥Insert the AC power supply cord securely into a known active AC outlet. 10

The unit switches to the

standby mode.

≥This is a power saving feature. Change “Off Timer” in the SETUP menu, if you would prefer.

≥One of the unit’s safety devices is activated. Press [POWER Í/I] on the main unit to turn the

unit on.

–

The display is dim. ≥Change “Front Display” in the SETUP menu. 45

“12:00” is flashing on the unit’s

display.

≥Set the clock.

The recording time display, the

transfer (dubbing) process

display and the displayed

recording time of MP3 are

different from the actual time.

≥The time on the unit’s display and the remaining recording time on the screen may be

indicated less or more than the actual value.

≥In DVD-R, the remaining capacity does not increase even if programs are erased.

≥If you repeat recording or editing 200 times or more, the remaining capacity of the DVD-R is

reduced and then recording or editing may be disabled.

≥The time during fast forward and rewind, or the process during transfer (dubbing) may not be

displayed accurately.

–

Compared to the actual

recorded time, the remaining

time displayed is less.

≥The displayed recording/play time is converted from the number of frames at 29.97 frames

(equal to 0.999 seconds) to one second. There will be a slight difference between the time

displayed and the actual elapsed time (e.g., actual one-hour elapsed time may display as

approximately 59 minutes 56 seconds). This does not affect the recording.

–

The tape counter isn’t

changing.

≥The tape counter does not change while playing unrecorded parts.

≥The display also appears like this if the tape is dirty or damaged. Consult your dealer if this is

the case.

–

Cannot operate the TV. ≥Change manufacturer code. Some TVs cannot be operated even if you change the code.

≥Press [TV/VIDEO] to change the input mode to “TV”.

25, 51

Cannot operate the DVD. ≥Press [DVD] when operating DVD. 6

Cannot operate the VHS. ≥Press [VHS] when operating VHS. 6

The remote control doesn’t

work.

≥The remote control code is wrong. Change to the correct code.

≥The batteries are depleted. Replace them with new ones.

≥Point the remote control at the remote control sensor on the main unit.

≥Remove obstacles between the remote control and main unit.

≥If you repeatedly insert discs or turn this unit on and off 50 times or more, the recording or

editing of DVD-R may be disabled.

–

The unit is on but cannot be

operated.

≥Recording drive or playback drive have not been selected properly.

≥Some operations may be prohibited by the disc.

≥The unit is hot (“U14” appears on the display). Wait until “U14” disappears.

≥One of the unit’s safety devices may have been activated.

Reset the unit as follows:

(1) Press [POWER Í/I] on the main unit to switch to standby.

If the unit doesn’t switch to standby, press and hold [POWER Í/I] on the main unit for

about 10 seconds. The unit is forcibly switched to standby.

Alternatively, disconnect the AC power supply cord, wait 1 minute, then reconnect it.

(2) Press [POWER Í/I] to turn the unit on.

–

Cannot eject a disc. ≥The unit may have a problem. While the unit is off, hold down [∫, STOP] and [CH, W] on the

main unit simultaneously for about 5 seconds. Remove the disc and consult the dealer.

–

VHSDVD

PP-Sample.book 66 ページ２００４年３月８日　月曜日　午後６時３分

Helpful Hints

Picture Page

Recording, Timer recording, Transfer (dubbing), External input Page

TV reception worsens after

connecting the unit.

≥This can occur because the signals are being divided between the unit and other equipment.

It can be solved by using a signal booster, available from audio-visual suppliers.

–

The images from this unit do

not appear on the TV.

Picture is distorted.

≥Make sure that the TV is connected to the VIDEO OUT terminal, S-VIDEO OUT terminal or

COMPONENT VIDEO OUT terminals on this unit.

≥Make sure that the TV’s input setting (e.g., VIDEO 1) is correct.

≥The TV isn’t compatible with progressive signals. Press and hold [∫, STOP] and

[“ DVD, DUBBING] on DVD of the main unit at the same time for about 5 seconds. The

setting will change to interlace.

–

Timer recording does not work

properly.

VCR Plus_ system does not

work properly.

≥When connected to cable TV box or satellite receiver, the VCR Plus_ system does not work.

≥The timer program is incorrect or different timer program times overlap. Correct the program.

≥The clock is not correct. Set the clock.

≥Correct the guide channels with “VCR Plus_ CH Setting” in the SETUP menu.

≥The same guide channel is set to 2 or more channel positions. Set the guide channel correctly

or delete unnecessary channels.

≥Timer recording will not be activated during formatting, transfer (dubbing) and other such

operations which should not be interrupted when they are being carried out.

–

29, 53

–

Timer recording does not stop

even when [∫, STOP] is

pressed.

≥Press [∫, STOP] and then [ENTER] within 5 seconds to turn “ ” off. Recording stops.

29, 52

The timer program remains

even after recording finishes.

≥The timer program remains if set to daily or weekly.

28, 52

Cannot transfer (dub) VHS to a

disc.

≥“TP” channel is not selected when recording from a video tape to a disc.

≥Some video tapes on the market (including rental videos) are copy-guarded to prevent illegal

reproductions. Copy-guarded video tapes cannot be properly recorded.

–

Cannot record video or sound

from a disc.

≥“DC” channel is not selected when recording from a disc to a video tape.

≥Most DVDs on the market (including rental DVDs) are copy-guarded to prevent illegal

reproductions. Copy-guarded DVDs cannot be properly recorded.

–

The sound level after editing is

not equal on DVD and on VHS.

≥The sound level on DVD and VHS may not match depending on the disc. When the sound

level in a particular part of the sound source is soft or loud, the sound may be recorded loudly

or softly on a video tape.

–

Strip-shaped black noise is

recorded.

≥The device in playback is interfered with by the TV because the device is too close to the TV.

Move the device away from the TV.

–

Cannot record video or sound

from the external device.

≥The external device is not correctly connected.

≥The proper external input channel (L1 or L2) is not selected.

VHSDVD

PP-Sample.book 67 ページ２００４年３月８日　月曜日　午後６時３分

Helpful Hints

DVD Picture Page

DVD Sound Page

DVD Play Page

∫ DVD

Status messages do not

appear.

≥Select “Automatic” in “Status Messages” in the SETUP menu.

The blue background does not

appear.

≥Select “On” in “Blue Background” in the SETUP menu.

The 4:3 aspect ratio picture

expands left and right.

Screen size is wrong.

≥Use the TV to change the aspect. If your TV does not have that function, set “Progressive” in

the Video menu to “OFF”.

≥Check the settings for “TV Type”, “4:3 TV Settings for DVD-Video” or “4:3 TV Settings for

DVD-RAM” in the SETUP menu.

There is a lot of after-image

when playing video.

≥Set “MPEG-DNR” in the Video menu to “OFF”.

When playing DVD-Video using

progressive output, one part of

the picture momentarily

appears to be doubled up.

≥Set “Progressive” in the Video menu to “OFF”. This problem is caused by the editing method

or material used on DVD-Video, but should be corrected if you use interlace output.

There is no apparent change in

picture quality when adjusted

with the Video menu in the on-

screen menus.

≥The effect is less perceivable with some types of video.

No sound.

Low volume.

Distorted sound.

Cannot hear the desired audio

type.

≥Check the connections and settings. Check the input mode on the amplifier if you have

connected one.

≥Press [AUDIO] to select the audio.

≥Turn off V.S.S. in the following cases.

When using discs that do not have surround sound effects such as Karaoke discs.

When playing MTS broadcast programs.

10–12,

23, 27

Cannot switch audio. ≥You cannot change the audio type when a DVD-R is in the disc tray.

≥You cannot change the audio type when playing a DVD-R. (You can select “Main” or “SAP” in

“Select MTS” in the SETUP menu before recording.)

≥You have used a digital connection. Set “Dolby Digital” to “PCM” or connect using audio

cables (analog connection).

≥There are discs which audio cannot be changed because of how the disc was created.

–

12, 44

–

Play fails to start even when

[1,PLAY] is pressed.

Play starts but then stops

immediately.

≥Insert the disc correctly with the label facing up.

≥You tried to play a blank DVD-RAM/DVD-R, or discs unplayable on this unit.

≥When recording to DVD-RAM using EP (8H) mode, play may not be possible on

DVD players that are compatible with DVD-RAM. In this case use EP (6H) mode.

DVD-Video is not played. ≥Some DVD-Video cannot be played when you change the ratings level. 43

Alternative sound track and

subtitles cannot be selected.

≥The languages are not recorded on the disc.

≥You may have to use the disc’s own menus to select languages.

–

No subtitles. ≥When progressive output is on, closed captions cannot be displayed.

≥Subtitles are not recorded on the disc.

≥Turn the Subtitles ON.

–

Angle cannot be changed. ≥This function depends on software availability. Angles can only be changed during

scenes where different angles are recorded.

–

You have forgotten your ratings

password.

≥With the tray open, keep pressing [:/6] and [5/9] on the main unit

simultaneously for 5 or more seconds.

–

Quick View does not work. ≥This does not work if the setting is “Off” in “Search Audio & PLAY t1.3”.

≥This does not work when audio is other than Dolby Digital.

≥This does not work when recording is in XP or FR mode.

–

The resume play function does not

work.

≥This function only works when “PB” is flashing in the unit’s display.

≥Memorized positions are canceled when the unit is turned off or when the tray is opened.

The memorized position on the play list is also canceled when the play list and title are

edited.

–

VHSDVD

PP-Sample.book 68 ページ２００４年３月８日　月曜日　午後６時３分

Helpful Hints

DVD Recording, timer recording Page

DVD Edit Page

VHS Picture Page

VHS Sound Page

VHS Play Page

VHS Recording, timer recording Page

Cannot record. ≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the

unit can record onto.

≥The disc is unformatted. Format the disc. [RAM]

≥The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with “DISC

SETTING”.

≥Some programs have limitations on the number of times they can be recorded (CPRM).

≥The disc is full or nearly full. Erase unneeded titles or use another disc.

≥You cannot record on finalized DVD-R discs.

≥If you repeatedly insert discs or turn this unit on and off 50 times or more, the recording or

editing of DVD-R may be disabled.

≥The material you are trying to record is copy-guarded.

≥Timer recording will not be activated when in editing or transfer (dubbing). Timer recording will

begin after the editing/transfer (dubbing) is finished.

18, 30

18, 63

23, 33, 37

–

A part or whole of a recorded

title has been lost.

≥If the power shuts down or the plug is disconnected from the household AC outlet while

recording or editing, the program may be lost or the disc may become unusable.

#We cannot offer any guarantee regarding lost titles or discs. You will have to format the disc

([RAM]) or use a new disc.

–

Cannot format. ≥The disc is dirty. Use a special cleaner and wipe clean.

≥You tried formatting a disc that is not compatible with this unit.

Cannot create chapters.

Cannot mark the start point

or the end point during

“Shorten” operation.

≥The unit writes the chapter division information to the disc when you turn it off or remove the

disc. The information is not written if there is an interruption in the power before this.

≥These operations are not possible with still pictures.

≥You cannot set points if they are too close to each other. You cannot set an end point before

a start point.

–

Cannot erase chapters. ≥When the chapter is too short to erase, use “Combine Chapters” to make the chapter longer. 35

The available recording time

doesn’t increase even after

erasing recordings on the

disc.

≥Available recording space on the DVD-R does not increase even after erasing previously

recorded titles.

–

Cannot create a play list. ≥You cannot select all the chapters at once in a title if the title also includes still pictures. Select

them individually.

–

∫ VHS

OSD messages do not appear. ≥Go to VHS MENU and select “ON” in “OSD”.

Press [STATUS] to show the on-screen messages constantly.

The blue back appears during

play.

≥You are playing a blank or poor quality part of the tape.

≥You can damage the unit if you play dirty or damaged tapes and this can cause the blue back

to appear. Consult your dealer.

–

Cannot hear the desired audio

type.

≥Press [AUDIO] to select the audio.

There is noise when playing a

video tape.

≥Adjust the tracking.

≥The tape is old or damaged.

–

Cannot play. ≥Tapes recorded under a TV system other than NTSC (PAL, SECAM, etc.) cannot be played. –

The playback screen flickers. ≥The video head is dirty.

≥The tape is too old or damaged.

–

“1” flashes when I try to start

recording.

Cannot record.

≥The erasure prevention tab has been removed. Cover the hole with adhesive tape.

Cannot record TV program. ≥The desired channel is not selected. Select the desired TV program. –

VHSDVD

PP-Sample.book 69 ページ２００４年３月８日　月曜日　午後６時３分

Helpful Hints

1. Damage requiring service — The unit should be serviced by qualified service personnel if:

(a)The AC power supply cord or AC adaptor has been damaged; or

(b)Objects or liquids have gotten into the unit; or

(c)The unit has been exposed to rain; or

(d)The unit does not operate normally or exhibits a marked change in performance; or

(e)The unit has been dropped or the cabinet damaged.

2. Servicing — Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized

servicing personnel.

3. Replacement parts — When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the

same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

4. Safety check — After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

For product information or assistance with product operation:

In the U.S.A., refer to “Customer Services Directory” on page 71.

In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or an

authorized Servicentre closest to you.

User memo:

Product Service

∫ Product information

The model number and serial number of this product can be

found on either the back or the bottom of the unit.

Please note them in the space provided below and keep for future

reference.

MODEL NUMBER DMR-E75V

SERIAL NUMBER

DATE OF PURCHASE

DEALER NAME

DEALER ADDRESS

TELEPHONE NUMBER

VHSDVD

PP-Sample.book 70 ページ２００４年３月８日　月曜日　午後６時３分

Helpful Hints

Panasonic Consumer Electronics Company,

Division of Matsushita Electric Corporation of America

One Panasonic Way Secaucus, New Jersey 07094

Panasonic Sales Company, Division of Matsushita Electric

of Puerto Rico, Inc.,

Ave. 65 de Infantería, Km. 9.5

San Gabriel Industrial Park, Carolina, Puerto Rico 00985

Panasonic DVD Recorder

Limited Warranty

Limited Warranty Coverage

If your product does not work properly because of a defect in materials or workmanship,

Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively

referred to as “the warrantor”) will, for the length of the period indicated on the chart below,

which starts with the date of original purchase (“warranty period”), at its option either (a)

repair your product with new or refurbished parts, or (b) replace it with a new or a

refurbished product. The decision to repair or replace will be made by the warrantor.

During the “Labor” warranty period there will be no charge for labor. During the “Parts”

warranty period, there will be no charge for parts. You must carry-in or mail-in your product

during the warranty period. If non-rechargeable batteries are included, they are not

warranted. This warranty only applies to products purchased and serviced in the United

States or Puerto Rico. This warranty is extended only to the original purchaser of a new

product which was not sold “as is”. A purchase receipt or other proof of the original purchase

date is required for warranty service.

Carry-In or Mail-In Service

For Carry-In or Mail-In Service in the United States call 1-800-211-PANA (7262) or visit

Panasonic Web Site: http://www.panasonic.com

For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax

(787)-768-2910.

Limited Warranty Limits And Exclusions

This warranty ONLY COVERS failures due to defects in materials or workmanship, and

DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES

NOT COVER damages which occurred in shipment, or failures which are caused by

products not supplied by the warrantor, or failures which result from accidents, misuse,

abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up

adjustments, misadjustment of consumer controls, improper maintenance, power line surge,

lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or

other business), rental use of the product, service by anyone other than a Factory

Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER

“LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE

FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM

THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF

THIS WARRANTY. (As examples, this excludes damages for lost time, travel

to and from the servicer, loss of media or images, data or other recorded

content. The items listed are not exclusive, but are for illustration only.) ALL

EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF

MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED

WARRANTY.

Some states do not allow the exclusion or limitation of incidental or

consequential damages, or limitations on how long an implied warranty lasts,

so the exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other

rights which vary from state to state. If a problem with this product develops

during or after the warranty period, you may contact your dealer or Servicenter.

If the problem is not handled to your satisfaction, then write to the warrantor’s

Consumer Affairs Department at the addresses listed for the warrantor.

PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED

WARRANTY ARE YOUR RESPONSIBILITY.

F1003

Limited Warranty (ONLY FOR U.S.A.)

Product or Part Name Parts Labor

DVD Recorder One (1) Year One (1) Year

Rechargeable Batteries,

DVD-RAM Disc (in

exchange for defective

item)

Ten (10) Days Not Applicable

Customer Services Directory

Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts

and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:

http://www.panasonic.com/support

or, contact us via the web at:

http://www.panasonic.com/contactinfo

You may also contact us directly at:

1-800-211-PANA (7262),

Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.

For hearing or speech impaired TTY users, TTY : 1-877-833-8855

Accessory Purchases

Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:

http://www.pasc.panasonic.com

or, send your request by E-mail to:

[email protected]om

You may also contact us directly at:

1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday – Friday 9 am to 8 pm, EST.)

Panasonic Services Company

20421 84th Avenue South, Kent, WA 98032

(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)

For hearing or speech impaired TTY users, TTY : 1-866-605-1277

Service in Puerto Rico

Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company

Factory Servicenter:

Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985

Phone (787)750-4300, Fax (787)768-2910

VHSDVD

PP-Sample.book 71 ページ２００４年３月８日　月曜日　午後６時３分

Helpful Hints

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

PANASONIC/TECHNICS PRODUCT—LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a

period as stated below from the date of original purchase.

Panasonic DVD Recorder One (1) year, parts and labour

LIMITATIONS AND EXCLUSIONS

This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed, subjected to

usage for which the product was not designed, misused or abused, damaged during shipping, or which has been altered or repaired in any

way that affects the reliability or detracts from the performance, nor does it cover any product which is used commercially. Dry cell batteries

are also excluded from coverage under this warranty.

This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is required

before warranty service is performed.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, EXCLUDING ANY IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.

In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of

implied warranties, so the above limitations and exclusions may not be applicable.

WARRANTY SERVICE

For product operation and information assistance, please contact your Dealer or our Customer Care Centre at:

Telephone #: (905) 624-5505 Fax #: (905) 238-2360 Web: www.panasonic.ca

For product repairs, please contact one of the following:

≥Your Dealer who will inform you of an authorized Servicentre nearest you.

≥Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca

≥A Panasonic Factory Servicentre listed below:

IF YOU SHIP THE PRODUCT TO A SERVICENTRE

Carefully pack and send prepaid, adequately insured and preferably in the original carton.

Include details of the defect claimed, and proof of date of original purchase.

Limited Warranty (ONLY FOR CANADA)

Richmond,

British Columbia

Calgary, Alberta Mississauga, Ontario Lachine, Québec

Panasonic Canada Inc.

12111 Riverside Way

Richmond, BC

V6W 1K8

Tel: (604) 278-4211

Fax: (604) 278-5627

Panasonic Canada Inc.

6835-8

St. N. E.

Calgary, AB

T2E 7H7

Tel: (403) 295-3955

Fax: (403) 274-5493

Panasonic Canada Inc.

5770 Ambler Dr.

Mississauga, ON

L4W 2T3

Tel: (905) 624-8447

Fax: (905) 238-2418

Panasonic Canada Inc.

3075, rue Louis A. Amos

Lachine, QC

H8T 1C4

Tel: (514) 633-8684

Fax: (514) 633-8020

VHSDVD

PP-Sample.book 72 ページ２００４年３月８日　月曜日　午後６時３分

Helpful Hints

Note

Mass and dimensions shown are approximate.

Specifications are subject to change without notice.

Specifications

Power Supply: AC 120 V ±10%, 50/60 Hz ±10%

Power Consumption: 32 W (Approx. 2 W in power save mode)

DVD

Recording format: DVD-RAM: DVD Video Recording format

DVD-R: DVD Video format

Audio: Dolby Digital 2 CH

Optical pickup System with 1 lens, 2 integration units

(wavelength: 658 nm for DVD, 795 nm for CD)

Recording disc: DVD-RAM: 12 cm (5q) 4.7 GB,

12 cm (5q) 9.4 GB,

8 cm (3q) 2.8 GB

DVD-R: 12 cm (5q) 4.7 GB, 8 cm (3q) 1.4 GB

(for General Ver. 2.0)

12 cm (5q) 4.7 GB

(for General Ver. 2.0/4k-SPEED

DVD-R Revision 1.0)

Recording mode/

recording time:

XP: approx. 10 Mbps/ approx. 60 min

SP: approx. 5 Mbps/ approx. 120 min

LP: approx. 2.5 Mbps/ approx. 240 min

EP: approx. 1.7/1.2 Mbps/approx. 360/480 min

(with 4.7 GB disc)

Playable discs: DVD-RAM: 12 cm (5q) 4.7 GB,

12 cm (5q) 9.4 GB,

8 cm (3q) 2.8 GB

DVD-R: 12 cm (5q) 4.7 GB, 8 cm (3q) 1.4 GB

(for General Ver. 2.0)

12 cm (5q) 4.7 GB

(for General Ver. 2.0/4k-SPEED

DVD-R Revision 1.0)

DVD-Video, DVD-Audio, Video CD,

CD-Audio (CD-DA), CD-R/RW (MP3, CD-DA,

Video CD formatted discs)

Video interface

Output:

RCA: CVBS: 1 Vp-p Zout: 75 ohm

S-Video: Y: 1 Vp-p, C: 0.286 Vp-p

Zout: 75 ohm

RCA (YP

BPR): Y: 1 Vp-p, PB: 0.7 Vp-p, PR: 0.7 Vp-p

Zout: 75 ohm

Audio interface

Input:

L1:

RCA: Standard: 309 mVrms, FS: 2 Vrms at 1 kHz

Zin: 22 k≠

L2:

RCA: Standard: 309 mVrms, FS: 2 Vrms at 1 kHz

Zin: 22 k≠

Output:

RCA: Standard: 309 mVrms, FS: 2 Vrms at 1 kHz

Zout: less than 1 k≠

Digital Audio: Optical Output connector

(PCM, Dolby Digital, DTS)

Video data:

Horizontal resolution: More than

XP: 500 lines SP: 400 lines

LP: 200 lines EP: 200 lines

Signal to Noise Ratio: More than 45 dB

Frequency Response: XP, SP: 0±3 dB at 4 MHz (0 dB at 0.1 MHz),

(Fine mode)

LP, EP: 0±3 dB at 2 MHz (0 dB at 0.1 MHz),

(Fine mode)

Audio data:

Dynamic Range: Rec/PB: more than 90 dB

DVD-Video PB (with LPCM): more than 99 dB

CD PB: more than 97 dB

Frequency Response: XP, SP, LP, EP (6H mode):

20 Hz–20 kHz (0±3 dB)

EP (8H mode): 20 Hz–12 kHz (0±3 dB)

Cross Talk: More than 60 dB at 1 kHz

LASER Specification

Class 1 LASER Product

Wave Length: 795 nm, 658 nm

Laser Power: No hazardous radiation is emitted with safety

protection

VHS

Recording format: VHS Video Cassette System Standard with FM

audio

Heads: 4 helical scan heads for video

2 helical scan heads for FM audio

1 fixed head for Normal audio

Recording modes/

recording time:

NTSC SP: 33.35 mm/s, 120 min

NTSC EP: 11.12 mm/s, 360 min

(with T-120 cassette)

others: FF/REW: approx. 54 s,

Jet REW: approx. 36 s (with T-120 cassette)

Audio interface

Input:

L1:

RCA: 309 mVrms Zin: 22 k≠

L2:

RCA: 309 mVrms Zin: 22 k≠

Video data:

Horizontal resolution: More than 200 lines

Signal to Noise Ratio: More than SP: 40 dB

EP: 40 dB

Frequency Response: SP, EP: -4.5–4.0 dB at 2 MHz (0 dB at 0.1 MHz)

Audio data:

Dynamic Range: HiFi: more than 90 dB

Frequency Response: HiFi: 20 Hz–20 kHz (0±3 dB)

Normal SP: 80 Hz–8 kHz (0±4 dB)

Normal EP: 80 Hz–4 kHz (-1±5 dB)

Signal to Noise Ratio: HiFi: more than 65 dB

Normal SP: more than 43 dB

Normal EP: more than 41 dB

Cross Talk: More than 50 dB at 1 kHz (HiFi)

Wow and Flutter: HiFi: less than 0.005%

Normal SP: 0.2% ma x

Normal EP: 0.4% ma x

DVD/VHS Common

Video interface:

TV system: NTSC

Input:

L1:

RCA: CVBS: 1 Vp-p Zin: 75 ohm

S-Video: Y: 1 Vp-p, C: 0.286 Vp-p

Zin: 75 ohm

L2:

RCA: CVBS: 1 Vp-p Zin: 75 ohm

S-Video: Y: 1 Vp-p, C: 0.286 Vp-p

Zin: 75 ohm

Output:

RCA: CVBS: 1 Vp-p Zout: 75 ohm

Audio interface:

Output:

RCA:

DVD: Standard: 309 mVrms, FS: 2 Vrms at 1 kHz

Zout: less than 1 k≠

VHS 309 mVrms Zout: less than 1 k≠

Tuner RF:

Tuner system/

Channel coverage:

NTSC-M

VHF: 2 ch–13 ch 75 ohm

UHF: 14 ch–69 ch 75 ohm

CATV: 5A & A-5 ch–EEE ch 75 ohm

One tuner (DVD and VCR common use)

RF converter: Not provided

Dimensions: Approx. 430 mm (W)k89 mm (H)k352 mm (D)

[Approx. 16

q (W)k3

q (H)k13

q (D)]

Mass: Approx. 5.8 kg (12.79 lbs.)

Operating Temperature: 5oC–40oC (41oF–104oF)

Operating Humidity: 35%–80% RH (no condensation)

VHSDVD

PP-Sample.book 73 ページ２００４年３月８日　月曜日　午後６時３分

Helpful Hints

COMMON

Antenna System ............................................................................14

Channel

adding, deleting ..........................................................................14

audio (DVD) ................................................................................40

Auto Channel Setting..................................................................14

captions ......................................................................................16

guide channel VCR Plus_ system .............................................15

Cleaning

disc, lens, main unit ....................................................................19

video heads ................................................................................48

Clock setting ..................................................................................46

Connection

amplifier, system component ......................................................12

antenna.......................................................................................11

antenna, television.................................................................9

, 10

cable TV box/satellite receiver....................................................11

external device............................................................................62

TV Type .........................................................................................17

VCR Plus_ system

guide channel .............................................................................15

timer recording (DVD).................................................................28

timer recording (VHS) .................................................................52

DVD

Angle..............................................................................................40

Audio

attributes.....................................................................................40

playback......................................................................................23

receiving, recording ....................................................................27

Change Thumbnail ........................................................................34

Chasing play..................................................................................25

CM Skip .........................................................................................22

Copy (play list)...............................................................................38

CPRM system.........................................................................18

, 63

Create chapters .............................................................................23

Create play lists .............................................................................36

Dialog Enhancer ............................................................................41

Direct Navigator......................................................................33

, 54

Display menus ...............................................................................40

DVD-RAM, DVD-R.........................................................................18

Enter Name

disc .............................................................................................30

operation.....................................................................................32

play list........................................................................................38

title .......................................................................................28

, 34

Erase

chapter........................................................................................35

chapter in play list.......................................................................39

play list........................................................................................37

title .......................................................................................23

, 33

Finalize ...................................................................................31

, 63

Flexible Recording.........................................................................27

Format disc....................................................................................31

FUNCTIONS window.....................................................................47

Language

audio ...........................................................................................43

code list.......................................................................................45

on-screen....................................................................................45

sound track .................................................................................40

subtitle .................................................................................40

, 43

Manual Transfer (Dubbing)............................................................59

MP3 ...............................................................................................24

MPEG-DNR ...................................................................................41

One Touch Transfer (Dubbing)......................................................58

PCM Down Conversion .................................................................44

Picture............................................................................................ 41

Play list ..........................................................................................36

Progressive......................................................................17

, 41, 63

Properties

play list ....................................................................................... 37

title.............................................................................................. 33

Protection

cartridge ..................................................................................... 18

disc............................................................................................. 30

title.............................................................................................. 34

Quick View .................................................................................... 21

Ratings ................................................................................... 42

, 43

Re-initialize Settings...................................................................... 43

Recording modes .......................................................................... 27

Repeat play ................................................................................... 41

Resume function ........................................................................... 21

SETUP menu ................................................................................ 42

Shorten (titles)............................................................................... 34

Simultaneous recording and play .................................................. 25

Sound track ................................................................................... 40

Status displays .............................................................................. 47

Subtitle ................................................................................... 40

, 43

Time Slip ................................................................................ 23

, 25

Timer recording ............................................................................. 28

Transfer......................................................................................... 41

TV Type......................................................................................... 17

V.S.S. ............................................................................................ 41

VHS

Audio ............................................................................................. 57

Auto Bilingual Choice .................................................................... 57

Auto SP/EP mode ......................................................................... 53

Category........................................................................................ 55

Direct Navigator............................................................................. 54

Intact erasure prevention tab......................................................... 48

Jet Rewind..................................................................................... 49

Manual Transfer (Dubbing) ........................................................... 61

On-screen display ......................................................................... 57

One Touch Transfer (Dubbing) ..................................................... 60

Remaining tape time ..................................................................... 57

Repeat Playback ........................................................................... 50

SQPB ............................................................................................ 50

Time Stamp................................................................................... 55

Timer recording ............................................................................. 52

Tracking......................................................................................... 50

VHS menu..................................................................................... 56

VISS .............................................................................................. 55

VP mode........................................................................................ 51

Index

PP-Sample.book 74 ページ２００４年３月８日　月曜日　午後６時３分

Español

Antes de uso

≥Las conexiones del equipo descritas sirven en concepto de ejemplo.

≥Antes de conectar, apague todo equipo y lea las instrucciones correspondientes de funcionamiento.

≥Los equipos periféricos y los cables correspondientes y los cables opcionales se venden por separado si no está indicado de otro modo.

∫75 ≠ cable coaxial

≥La imagen y el sonido desde esta unidad no pasa a través del

cable coaxial 75 ≠ al televisor. Tenga cuidado de conectar uno de

los siguientes terminales en esta unidad al televisor: el terminal

AUDIO/VIDEO OUT, el terminal S-VIDEO OUT o el terminal

COMPONENT VIDEO OUT. Si el televisor no tiene ninguno de

estos terminales, consulte a su proveedor local.

∫Cuando la unidad no ha de ser usada durante un largo

tiempo

Para ahorrar energía, desenchúfela de la toma doméstica CA. Esta

unidad consuma una pequeña cantidad de corriente aun cuando

está apagada (aproximadamente 2 W).

∫No conecte la unidad a través de la grabadora del

cassette de vídeo

Las señales de vídeo alimentadas a través de las grabadoras de

cassette de vídeo se afectarán por los sistemas de protección de los

derechos de autor y la imagen no se verá correctamente en el televisor.

≥Cuando se conecte a un televisor teniendo un VCR incorporado,

conéctelo a los terminales de entrada por el lado del televisor y no

por el lado del VCR.

∫ Conexión a un televisor o a un VCR

RF IN

RF OUT

VHF/UHF

R - AUDIO - L

VIDEO

S-VIDEO

IN 1 (L1)

OPTICAL

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COMPONENT VIDEO OUT

(480P/480I)

YPB PR

R - AUDIO - L

VIDEO

R - AUDIO - L

VIDEO

S-VIDEO

DVD OUT

DVD/VHS COMMON OUT

VHF/UHF

RF IN

VIDEO

OUT

VHF/UHF

RF IN

R L

AUDIO OUT

COMPONENT

VIDEO IN

S VIDEO IN

AUDIO IN

R L

VIDEO IN

2 1

A la

antena

Antena al aire

libre

Cable del

televisor

Antena interior

Cable

Audio/

Vídeo

Cable de la

antena

A la toma doméstica CA

Grabadora de cassette de

vídeo

Ventilador de

refrigeración

Cable de vídeo

del

componente

75 ≠ cable coaxial

(l abajo)

Cable de alimentación CA

Sólo conecte después de terminar

todas las demás conexiones.

Esta unidad

75 ≠ cable coaxial

Cable Audio/Vídeo

Partidor

indica los accesorios incluidos.

indica los accesorios no incluidos.

son conexiones necesarias. Conecte según el orden numérico.

Al L1

Cuando hace una conexión,

tenga cuidado de conectar en

el televisor los cables de audio

a los correspondientes

terminales de entrada audio.

Terminal COMPONENT VIDEO OUT

Estos terminales pueden ser usados para la salida sea entrelazada sea

progresiva y para proporcionar una imagen más nítida que el terminal de

S-VIDEO OUT.

≥Conecte a los terminales del mismo color.

Cable

S-Vídeo

Terminal S-VIDEO OUT

El terminal S-VIDEO OUT hace conseguir una imagen más nítida que el

terminal VIDEO OUT. (Los resultados reales dependen del televisor.)

Rojo

Blanco

Amarillo

Utilice un partidor si quiere

también conectar la antena a su

VCR.

TV TV

Esta unidad

VCR

Esta unidad

ESPAÑOL

PP-Sample.book 75 ページ２００４年３月８日　月曜日　午後６時３分

Antes de uso

[[DVD]]

Operaciones preliminares

≥Encienda el televisor y seleccione la entrada de vídeo

correspondiente para conformar las conexiones a esta unidad.

≥Si conecta la unidad a una caja de televisor de cable o a un

receptor de satélite, sintonice su PBS local para que funcione el

“Ajuste automático del reloj”.

Si no hay PBS local, ajuste el reloj manualmente (“Ajuste manual

del reloj”).

≥Pulse [DVD].

[1] Pulse [Í, DVD/VHS POWER].

[2] Utilice [3, 4] para seleccionar el idioma del

menú y oprima [ENTER].

[3] Oprima [ENTER] para iniciar la sintonización

automática por enchufe.

Luego, la unidad procede al ajuste automático del reloj. El

temporizador se visualiza cuando finaliza.

[4] Pulse [ENTER].

∫Si el reloj adelanta o atrasa una hora respecto a la hora

actual

[1] Mientras el disco está detenido, pulse [FUNCTIONS].

[2] Seleccione “SETUP” con [3, 4, 2, 1] y pulse [ENTER].

[3] Ajuste “j1” o “i1” en “Ajuste del huso horario” en el menú

“Configuración” usando [3, 4, 2, 1] y [ENTER].

[4] Pulse [RETURN] para salir.

∫Si la unidad no puede ajustar automáticamente el reloj

Pulse [ENTER] para visualizar la pantalla “Ajuste manual del reloj”.

Ajuste la hora manualmente.

Ajuste estos canales de guía de manera que se pueda usar el

sistema VCR Plusi para la grabación temporizada. Antes de

proceder a los ajustes, prepare el papel que muestra los canales, los

nombres de las estaciones y los canales de guía.

por ej.,

° Mire en los canales de guía para las estaciones en revistas.

°° Apunte todas las estaciones que puede recibir.

≥Si ha conectado una caja TV de cable o un receptor de satélite, el

sistema VCR Plus_ no funciona como no ha ajustado los canales

de la guía.

Operaciones preliminares

≥Pulse [DVD].

[1] Mientras el disco está detenido

Pulse [FUNCTIONS].

[2] Seleccione “SETUP” con [3, 4, 2, 1] y pulse

[ENTER].

[3] Seleccione “Canal” con [3, 4] y pulse [2, 1].

[4] Seleccione “VCR Plusr Ajuste canal” con

[3, 4], luego pulse [ENTER].

[5] Utilice [3, 4] para seleccionar el canal de guía

que quiere ajustar y pulse [1].

[6] Utilice [3, 4] para seleccionar el canal

correspondiente al de guía y pulse [2].

≥Para borrar un número, pulse [CANCEL/RESET, ¢].

≥Repita los pasos 5 y 6 para introducir otros canales.

[7] Pulse [ENTER].

No debe cambiar el ajuste cuando está conectado a un televisor que tiene

el aspecto estándar de 4:3 y no es compatible con la salida progresiva.

Operaciones preliminares

≥Pulse [DVD].

[1] Mientras el disco está detenido

Pulse [FUNCTIONS].

[2] Seleccione “SETUP” con [3, 4, 2, 1] y pulse

[ENTER].

[3] Seleccione “Pantalla TV” con [3, 4] y pulse

[2, 1].

[4]

Seleccione “Tipo TV” con [

] y pulse [ENTER].

≥Aspecto 4:3/Aspecto 16:9:

≥480P/480I:

Seleccione “480P” si el televisor es compatible con la salida

progresiva.

[5] Utilice [3, 4] para seleccionar el detalle, luego

pulse [ENTER].

∫Para volver a la pantalla anterior

Pulse [RETURN].

∫Para salir de la pantalla

Pulse [RETURN].

Sintonización automática por enchufe

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

POWER

TIME SLIP

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

VCR Plus+

OUTPUT

3, 4, 2, 1

ENTER

DVD

6, 5

;

∫

Teclas

numéricas

English

Español

Français

Press ENTER

Pulse ENTER

Appuyer sur ENTER

Select Language

Seleccione la Lengua

Sélection de Langue

Ajustes del canal de guía para el sistema

VCR Plus+

Nombre de

la estación

Canal

de guía°

Número

del

canal°°

Ajuste del canal

(En el paso 5)

CBS 04 04 Innecesario

HBO 33 15

Introduzca el canal 15

sucesivo al canal de guía 33.

Nickelodeon 38 20

Introduzca el canal 20

sucesivo al canal de guía 38.

Selección del tipo de televisor

4:3

16:9

Televisor de aspecto

estándar 4:3

Televisor de pantalla

panorámica 16:9

DVD

PP-Sample.book 76 ページ２００４年３月８日　月曜日　午後６時３分

Reproducción

[1] Pulse [<, OPEN/CLOSE] en la unidad principal

para abrir la bandeja.

Puede Ud. insertar un disco de cartucho o sin cartucho.

[2] Pulse [<OPEN/CLOSE] en la unidad principal

para cerrar la bandeja.

≥Al introducir un DVD-RAM con la lengüeta de protección de

escritura ajuste a “PROTECT (PROTEGER)”, la reproducción

comienza automáticamente.

Nota

≥Cargue los discos de dos caras de manera que la etiqueta de la

cara que quiere grabar/reproducir mire hacia arriba.

≥

No es posible grabar continuamente de un lado de un disco de doble

cara al otro. Es necesario que se expulse el disco y se lo revuelva.

≥Cuando utiliza un DVD-RAM de 8 cm (3q), quite el disco del

cartucho e insértelo, teniendo cuidado de alinearlo con la ranura.

[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]

Operaciones preliminares

≥Pulse [DVD].

[1] Pulse [Í, DVD/VHS POWER] para encender la

unidad.

[2] Inserte un disco.

(l arriba)

[3] Pulse [1, PLAY].

La bandeja se cierra y comienza la reproducción.

(La unidad emplea un tiempo para la adquisición de los datos

del disco antes de comenzar la reproducción.)

≥La reproducción inicia desde el último título grabado.

[RAM] [DVD-R]

≥La reproducción inicia a partir del comienzo del disco.

[DVD-A] [DVD-V] [VCD] [CD] [MP3]

∫Para detener la reproducción

Pulse [∫, STOP]. (lderecha, “Función

Resume”)

≥Cuando se detiene la reproducción es

posible que aparezca una pantalla como a

la derecha. Pulsando otra vez [∫, STOP]

es posible utilizar el sintonizador de la

unidad para ver la televisión.

[DVD-A] [DVD-V] [VCD] [CD] [MP3]

∫Para interrumpir provisionalmente la reproducción

Pulse [;, PAUSE]. (Pulse nuevamente la tecla para reanudar la

reproducción.)

[VCD]

Pulse las teclas numéricas para seleccionar un detalle.

por ej.: “5”: [0] )[5]

“15”: [1] )[5]

[DVD-A] [DVD-V]

Pulse [3, 4, 2, 1] para seleccionar un detalle, luego pulse

[ENTER].

≥Para seleccionar un detalle es posible también utilizar las teclas

numéricas.

Otros botones usados para hacer funcionar los menús

Lea las instrucciones del disco para más información acerca del

funcionamiento.

Nota

≥Si aparece “ ” en el televisor, la unidad o el disco prohiben la

operación.

[RAM] (Solo con Dolby Digital)

Puede ser aumentada la velocidad de

reproducción sin distorsionar el audio.

Durante la reproducción

Pulse y mantenga [1, PLAY].

∫Para volver a la velocidad normal

Pulse [1, PLAY].

[RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]

[1] Durante la reproducción

Pulse [∫, STOP].

≥“PB” destella en el

visualizador de la unidad

(solo reproducción

normal). La unidad

memoriza la posición.

[2] Pulse [1, PLAY].

≥La reproducción vuelve a comenzar de donde se interrumpió.

∫

Para cancelar la función de reanudación

(solo reproducción normal)

Pulse [∫, STOP] mientras la unidad recuerda la

posición.

(La posición se borra también cuando se apaga

la unidad.)

[RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]

Durante la reproducción

Pulse [6, SLOW/SEARCH] o

[5, SLOW/SEARCH].

≥En la unidad principal, mantenga pulsado [:/6] o [5/9].

≥Hay 5 velocidades de búsqueda. Cada vez que se pulsa la tecla la

velocidad de búsqueda aumenta.

≥Pulse [1, PLAY] para volver a iniciar la reproducción.

[RAM] [DVD-R] [DVD-A]

(Sólo partes de imagen en movimiento)

[DVD-V] [VCD]

Durante la pausa

Pulse [

, SLOW/SEARCH] o [

, SLOW/SEARCH].

≥En la unidad principal, mantenga pulsado [:/6] o [5/9].

≥Cuando la reproducción de movimiento lenta dura más de

5 minutos, se detiene automáticamente.

≥La velocidad aumenta hasta 5 pasos.

≥Pulse [1, PLAY] para volver a iniciar la reproducción.

≥Sólo dirección en avance ([5], [5/9]). [VCD]

Introducción de discos

(2)

(3)

(1)

Disco sin cartucho

Disco de cartucho

(1) Inserte etiqueta arriba.

(2) Insertar el disco en la parte inferior de las guías de la bandeja.

(3) Insertar el disco con la etiqueta hacia arriba y la flecha hacia

el interior.

Reproducción de los discos

∫ Cuando en el televisor aparece la pantalla

de un menú

Vista rápida (Reproducción t1.3)

Continuación de la reproducción

(Función Resume)

Avance rápido y rebobinado—SEARCH

Reproducción de cámara lenta

REPR.

DVD-RAM

REPR. x1.3

DVD-RAM

por ejemplo:

Reproducción

normal

L R

DVD-RAM

••••

DVD

PP-Sample.book 77 ページ２００４年３月８日　月曜日　午後６時３分

Reproducción

[RAM] [DVD-R] [DVD-A]

(Sólo partes de imagen en movimiento)

[DVD-V] [VCD]

Durante la pausa

Pulse [2;], [;1], [2] o [1].

≥Cada vez que se pulsa aparece el cuadro siguiente o el anterior.

≥Pulse [1, PLAY] para volver a iniciar la reproducción.

≥Solo dirección en avance ([;1], [1]). [VCD]

[RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]

Durante la reproducción o la pausa

Pulse [:, SKIP] o [9, SKIP].

≥En la unidad principal, pulse [:/6] o [5/9].

≥Cada presión hace aumentar el número de saltos.

[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]

Inicio de la reproducción desde un título, capítulo o una pista

seleccionados.

Durante la reproducción

Pulse las teclas numéricas para seleccionar el

detalle.

por ej.: “5”: [0] )[5] [MP3] “5”: [0] )[0] )[5]

“15”: [1] )[5] “15”: [0] )[1] )[5]

[DVD-A]

Mientras que está visualizado el salva

pantalla puede ser especificado un número

de grupo.

por ej.: “5”: [5]

≥Éste sólo funciona cuando está parada

(está visualizado el salva pantalla) con

algunos discos.

≥Reproducir grupos adicionales

Unos discos contienen grupos adicionales. Si aparece una pantalla

de contraseña después de seleccionar un grupo, introduzca la

contraseña con los botones numéricos, luego pulse [ENTER]. Se

refiera también a la envoltura del disco.

[RAM] [DVD-R]

Puede saltar por cerca de 1 minuto por cada vez que se pulsa.

Durante la reproducción

Pulse [CM SKIP].

[RAM] [DVD-R]

Salta al tiempo especificado.

Visualiza la imagen TV a ser recibida como imagen en imagen.

[1] Durante la reproducción

Pulse [TIME SLIP]. (Vuelva a pulsar para suprimir.)

≥Escuchará el audio de la reproducción.

≥El fondo azul no aparece en la pantalla de recepción.

[2] Pulse [3, 4] para introducir el tiempo y pulse

[ENTER].

≥El indicador del tiempo se apagará después de 5 segundos

aproximadamente, pero ajustando de nuevo el indicador

volverá a encenderse.

≥La reproducción saltará el tiempo especificado.

≥Pulse para cambiar por unidades de 1 minuto. Pulse y

mantenga pulsado para cambiar por unidades de 10 minutos.

(1)Imágenes reproducidas

(2)Imágenes actuales en recepción

≥Puede cambiar el canal a ser recibido pulsando [CH, W, X].

≥No puede cambiar el canal a ser recibido mientras va

grabando.

∫Para visualizar completamente las imágenes de

reproducción

Pulse [TIME SLIP].

[RAM] [DVD-R]

Puede borrar los títulos mientras va reproduciendo.

≥Una vez borrado el título no puede ser restablecido. Asegúrese

antes de proceder.

[1] Durante la

reproducción

Pulse

[DVD ERASE].

[2] Seleccione

“Borrar” con [2]

y pulse [ENTER].

[RAM]

[1] Durante la reproducción

Pulse [CHAPTER].

≥Pulse [:, SKIP] o [9, SKIP] para saltar al comienzo del

capítulo.

≥No puede activar esta función cuando graba y reproduce al

mismo tiempo.

Operaciones preliminares

≥Pulse [DVD].

Visión cuadro por cuadro

Salto

Reproducción directa

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

POWER

TIME SLIP

CHAPTER

JET REW

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

DVD ERASE

VCR Plus+

OUTPUT

3, 4, 2, 1

2;, ;1

ENTER

DVD

CM SKIP

TIME SLIP

CHAPTER

DVD ERASE

6, 5

:, 9

;

∫

DIRECT NAVIGATOR

TV/VIDEO

CH, W, X

REC MODE

Teclas

numéricas

Salva pantalla

Salto CM

Visualización de la imagen TV como

imagen en imagen/

Selección de la cantidad de tiempo a

saltar—Time Slip

Borrado de un título que se está

reproduciendo

Crear capítulos

0 min

–5 min

(1)

(2)

REPR.

Canal8

REPR.

Canal8

Borrar

Borrar Cancelar

0 : 58(SP)

Se borrará el respectivo capítulo

de la LISTA DE REPRODUCCION.

Tiempo grabación restante

DVD

PP-Sample.book 78 ページ２００４年３月８日　月曜日　午後６時３分

Grabación

[RAM]

Operaciones preliminares

≥Pulse [DVD].

Sugerencia

≥El sonido no funciona durante el avance rápido.

Es posible empezar la reproducción desde el comienzo de un título

mientras lo sigue grabando.

Durante la grabación o la grabación temporizada

Pulse [1, PLAY].

Se enciende el indicador Time Slip en la unidad principal.

Es posible comenzar la reproducción del título que se está grabando

o reproducir un título grabado anteriormente.

Durante la grabación o la grabación temporizada

[1] Pulse [DIRECT NAVIGATOR].

[2] Utilice [3, 4, 2, 1] para seleccionar el título,

luego pulse [ENTER].

≥Se enciende el indicador Time Slip en la unidad principal.

≥Para salir de la visión del título, pulse [DIRECT NAVIGATOR].

Es posible reproducir el título que se está grabando para controlar

su correcta grabación. Es también posible controlar las partes

grabadas anteriormente.

Durante la grabación o la grabación temporizada

[1] Pulse [TIME SLIP].

[2] Pulse [3, 4] para seleccionar el tiempo, luego

pulse [ENTER].

≥El indicador del tiempo se apagará después de 5 segundos

aproximadamente, pero ajustando de nuevo el indicador

volverá a encenderse.

≥

Pulse [

] para cambiar por unidades de 1 minuto. Pulse y

mantenga pulsado [

] para cambiar por unidades de 10 minutos.

∫Para visualizar completamente las imágenes de

reproducción

Pulse [TIME SLIP].

≥Pulse [TIME SLIP] para volver a la pantalla de imagen a imagen.

Referencia

≥Según la escena, la imagen de la pantalla pequeña puede resultar

distorsionada o bien parpadear. Sin embargo, esto no afecta la

imagen grabada.

[1] Pulse [TV/VIDEO] para cambiar el modo de

entrada en “TV”.

[2] Pulse [CH, W, X] del televisor para seleccionar

los canales TV deseados.

Referencia

≥Es posible hacerlo también si la unidad está efectuando una

grabación temporizada.

≥La grabación no se ve afectada.

[RAM] [DVD-R]

≥Puede grabar hasta 99 títulos en un disco.

≥DVD-RAM/DVD-R tiene restricciones en la grabación.

≥La grabación tendrá lugar en un espacio abierto en el disco duro o

en el disco. Los datos no se sobrescribirán.

≥

Si no se deja espacio en el disco de grabación, será menester que

se borren los títulos innecesarios (

l 78

) o se utilice un nuevo disco.

Operaciones preliminares

≥Quite la protección. [RAM]

≥Pulse [DVD].

[1]

Pulse [

, DVD/VHS POWER] para encender la unidad.

[2] Inserte un disco. (l 77)

≥Cuando con esta unidad utiliza un DVD-RAM por la primera

vez, formatéelo para garantizar una esmerada grabación.

[3] Pulse [CH, W, X] para seleccionar el canal.

Para seleccionar con las teclas numéricas:

Modo TV (Ondas hertzianas)

por ej., “5”: [0] )[5]

“15”: [1] )[5]

Modo CATV (Cable)

por ej., “5”: [0] )[0] )[5]

“15”: [0] )[1] )[5]

“115”: [1] )[1] )[5]

[4] Pulse [REC MODE] para seleccionar el modo de

grabación.

[5] Pulse [¥, DVD REC] para iniciar la grabación.

≥

No es posible cambiar de canal o el modo durante la grabación.

Es posible cambiarlos cuando la grabación se encuentra en

pausa, pero el material se grabará como un título separado.

∫Para detener temporalmente la grabación

Pulse [

;

, PAUSE]. (Pulse nuevamente la tecla para reanudar la grabación.)

≥El título no puede dividirse en un título separado.

∫Para detener la grabación

Pulse [∫, STOP].

≥Grabado como 1 título hasta donde se detiene la posición.

≥Después de terminar la grabación, el DVD-R lleva más o menos 30

segundos para que la unidad finalice su información de gestión.

∫Para especificar un tiempo para detener la grabación

Durante la grabación

Pulse [

, DVD REC] para seleccionar el tiempo de grabación.

≥En la unidad principal, pulse [¥, REC].

Visualización de la unidad

Cada vez que pulsa la tecla:

Contador (suprimir) # 0:30 # 1:00 # 1:30

^------- 4:00 ! 3:00 ! 2:00 !--------}

Según el contenido a ser grabado, los tiempos de grabación pueden

salir más cortos que los señalados.

(Unidad: hora)

° Cuando en el menú SETUP se ha ajustado a “EP (6H)” el “Tiempo

de grab. en el modo EP”.

La calidad del sonido se baja, en comparación con otros modos

de grabación, cuando se usa “EP (8H)”.

Nota

Cuando se graba en DVD-RAM usando el modo EP (8H), la

reproducción puede no ser posible en unidades DVD que sean

compatibles con DVD-RAM. En este caso utilice el modo EP (6H).

Reproducción durante la grabación

∫ Reproducción seguida

∫ Grabación y reproducción simultáneas

∫ TIME SLIP

∫Para detener la reproducción y la grabación

[1] Pulse [∫, STOP]. La reproducción se detiene.

(Espere 2 segundos o más)

[2] Pulse [∫, STOP]. La grabación se detiene.

≥

No es posible detener la grabación con [

∫

, STOP] durante la

grabación temporizada. Para detener la grabación temporizada

pulse [

∫

, STOP], luego [ENTER] dentro de 5 segundos.

- Puede también seguir pulsando [

∫

] en la unidad principal durante

más de 3 segundos para detener la grabación temporizada.

Recepción de las transmisiones

televisivas durante la grabación

Grabación de programas televisivos

∫ Modos de grabación y tiempo aproximado

de grabación

DVD-RAM

DVD-R

(4,7 GB)

De un solo lado

(4,7 GB)

Doble lado

(9,4 GB)

XP (Alta calidad) 1 2 1

SP (Normal) 2 4 2

LP (Larga duración) 4 8 4

EP (Reproducción de

muy larga duración)

8 (6°) 16 (12°)8 (6°)

DVD

PP-Sample.book 79 ページ２００４年３月８日　月曜日　午後６時３分

Ejecución de grabaciones temporizadas

[RAM] [DVD-R]

Puede introducir hasta 16 programas con un adelanto de un mes.

Operaciones preliminares

≥Quite la protección. [RAM]

≥Inserte un disco (l 77) y asegúrese de que haya bastante espacio

vacío para grabarle encima.

≥Pulse [DVD].

[1] Pulse [VCR Plus_].

[2] Pulse las teclas numéricas para introducir el

número PlusCode

≥Pulse [2] para volver a la cifra correcta.

[3] Pulse [ENTER].

Cerciórese del programa y, si lo necesita, corrija usando [3, 4,

2, 1]. (l abajo, paso 3)

[4] Si el programa es correcto

Pulse [ENTER].

≥“ ” se enciende en el visualizador de la unidad.

≥Repita los pasos 1–4 para programar otras grabaciones.

[5] Pulse [RETURN].

[1] Pulse [PROG/CHECK].

≥Cerciórese de que esté seleccionado “Nuevo programa”.

[2] Pulse [ENTER].

[3] Utilice [1] para desplazar y cambiar los detalles

con [3, 4].

≥Pueden usarse las teclas numéricas para introducir “CANAL”,

“FECHA”, “ACT” y “DES”.

≥CANAL (Posición del programa/Nombre de la estación de TV)

≥FECHA

Puede crear usted un programa diario o semanal.

Todos los programas diarios o semanales se cuentan como un

solo programa.

≥ACT (hora de encendido)/DES (hora final)

Si mantiene pulsado el botón, el tiempo aumentará o

disminuirá en incrementos de 30 minutos.

≥MODO (Modo de grabación)

Para cambiar el modo de grabación, puede pulsar también

[REC MODE].

XP,.SP,.LP,.EP,.FR,.XP... (l 79)

≥Intr.ir nomb.

Pulse [2, 1] para seleccionar “Intr.ir nomb.” luego pulse

[ENTER].

[4] Al terminar las correcciones pulse [ENTER].

≥“ ” se enciende en el visualizador de la unidad.

≥Para continuar programando:

Seleccione “Nuevo programa” y repita los pasos 2–4.

[5] Pulse [RETURN].

∫Para detener la grabación mientras un programa está

trabajando

Pulse [∫, STOP], luego [ENTER] dentro de 5 segundos.

≥Puede también seguir pulsando [∫] en la unidad principal durante

más de 3 segundos para detener la grabación.

[1] Pulse [PROG/CHECK].

[2] Pulse [3, 4] para seleccionar el programa.

≥Puede seleccionarse el programa introduciendo un número de

2 cifras utilizando las teclas numéricas.

por ej.: “5”: [0] )[5]

“15”: [1] )[5]

≥Utilice [2, 1] para desplazarse a la página que antecede o

sigue la visualizada.

[3] Pulse [CANCEL/RESET, ¢] para eliminar,

No es posible eliminar programas en fase de grabación.

o pulse [ENTER] para cambiar.

Se visualiza la pantalla de ajuste de la grabación temporizada.

[4] Si pulsa [ENTER] en el paso 3,

Utilice [3, 4, 2, 1] para cambiar luego pulse

[ENTER].

[5] Pulse [RETURN].

Referencia

≥Los programas cuya grabación no tuvo éxito no se borran

inmediatamente de la lista (destacados en gris), pero se borran

automáticamente a las 4 de la mañana dos día después.

≥Durante la grabación temporizada puede cambiar el tiempo final

mientras el modo de grabación no es “FR”.

La grabación temporizada de programas TV no puede ejecutarse en

DVD y VHS conjuntamente.

Verifique si el tiempo inicial de la grabación temporizada no se

superpone en la pantalla de programación temporizada tanto del

DVD (l arriba) como del VHS (l 83).

Cuando se superponen los ajustes de la grabación temporizada:

≥Cuando el tiempo inicial de las dos grabaciones temporizadas es el

mismo, la del DVD tiene la prioridad.

≥Cuando están especificados los canales del sintonizador en la

grabación temporizada tanto en el VHS como en el DVD, sólo

podrá tener comienzo una grabación temporizada.

≥Cuando el intervalo entre la primera grabación temporizada y la

segunda en el DVD es de 1 minuto o menos como señalado a

continuación, la segunda grabación temporizada en el DVD tiene la

prioridad sobre la en el VHS aunque su tiempo inicial sea posterior

a la grabación temporizada del VHS.

∫Precauciones en la grabación temporizada

Cuando llega el tiempo que se definió, la grabación temporizada

inicia automáticamente.

≥La grabación temporizada puede iniciar mientras la unidad está

tanto apagada como encendida. Cuando la unidad está

apagada, el sonido y el vídeo no salen en el televisor.

Uso del sistema VCR Plus+

Programación manual

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

POWER

TIME SLIP

CHAPTER

JET REW

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

DVD ERASE

VCR Plus+

OUTPUT

3, 4, 2, 1

ENTER

DVD

VCR Plusi

RETURN

REC MODE

PROG/CHECK

;

∫

JET REW

VHS

6, 5

Teclas

numéricas

Controle, cambie o borre el programa

Precauciones al usar la grabación

temporizada en DVD y VHS

1 minuto

4 CANAL

10 CANAL

2 CANAL

VHS

DVD

PP-Sample.book 80 ページ２００４年３月８日　月曜日　午後６時３分

[[VHS]]

Reproducción

Poniendo hacia arriba la superficie desde la que puede ver el rollo de la

cinta,

Inserte un cassette de vídeo.

≥Esta unidad se enciende automáticamente.

∫Para expulsar el cassette de vídeo

≥

Puede expulsar el cassette de vídeo cuando la unidad está en el modo de

espera. Ésta vuelve en espera una vez que haya expulsado el cassette de vídeo.

Por lo que respecta a la unidad principal.

≥Pulse [<, EJECT] en la unidad principal.

Por lo que respecta al mando a distancia.

≥Pulse [VHS], luego mantenga pulsado [∫, STOP] durante 3 segundos o más.

≥Haga disparar la lengüeta del cassette de vídeo para evitar un borrado accidental. Cubra el orificio con

una doble capa de cinta adhesiva para cuando quiere usar el cassette de vídeo para una nueva

grabación.

≥Puede usar los cassettes de vídeo con las marcas VHS y S-VHS, pero esta unidad no permite disfrutar

plenamente las características de los cassette de vídeo S-VHS.

Operaciones preliminares

≥

Seleccione ha unidad que ve el canal (o la entrada AV) en el televisor.

≥Pulse [VHS].

[1] Pulse [Í, DVD/VHS POWER] para encender la

unidad.

[2] Inserte un cassette de vídeo grabado.

(larriba)

[3] Pulse [1, PLAY].

≥La reproducción inicia automáticamente si inserta un cassette

de vídeo al que se ha quitado su lengüeta.

∫Para reproducir todavía

Pulse [;, PAUSE]. (Pulse nuevamente la tecla para reanudar la

reproducción.)

∫Para detener la reproducción

Pulse [∫, STOP].

Nota:

≥Cuando está apagada la unidad, un cassette de vídeo insertado

puede ser reproducido pulsando [1, PLAY].

≥Cuando la cinta llega al fin, esta unidad la rebobina

automáticamente hasta el comienzo. Esta función no obra durante

la grabación temporizada, el avance rápido y la grabación con

parada especificada.

≥La búsqueda Jet, la localización progresiva, el rebobinado o la

reproducción lenta se quitan automáticamente a los 10 minutos, y

la reproducción de imagen fija a los 5 minutos.

≥Cuando ve una imagen fija o una reproducción lenta, la imagen

que aparece en el modo VP puede resultar distorsionada.

≥

Cuando reproduce una cinta que fue grabada en otro VCR, puede ser

necesario ajustar la pista. En algunos casos, la calidad de la imagen

podría resultar todavía inferior. Esto se debe al formato limitado.

Mientras el disco está detenido

Pulse [6] (atrás)/[5] (en avance).

Durante la reproducción

Dé un ligero golpe en o mantenga pulsado [6]

(atrás)/[5] (en avance).

≥Si mantiene pulsadas estas teclas, la reproducción vuelve a iniciar

soltándolas.

≥Pulse [1, PLAY] para volver a iniciar la reproducción.

Durante la reproducción

Dé un ligero golpe en [6] (atrás)/[5] (en

avance) dos veces. Puede aumentar la localización

progresiva/velocidad de búsqueda en rebobinado.

≥Pulse [1, PLAY] para volver a iniciar la reproducción.

≥Seleccione la velocidad de búsqueda para ver la imagen grabada.

≥

La imagen que aparece en el modo EP o VP a una velocidad

aproximada de 35 veces puede resultar distorsionada. Puede ocurrir un

desplazamiento vertical. Esto no es un funcionamiento defectuoso pero

puede tener lugar, cambie a una velocidad aproximada de 27 veces.

≥La imagen podría ser incolora o podría resultar distorsionada

según el televisor.

Durante la reproducción

Pulse y mantenga [

;

, PAUSE] durante 2 segundos o más.

≥Pulse [1, PLAY] para volver a iniciar la reproducción.

Para lograr un rebobinado más rápido

Pulse [JET REW6].

La indicación “J. REW” aparece en la pantalla del televisor (salvo

cuando aparece la indicación del tiempo que queda en la cinta).

≥Según la cinta o la condición de funcionamiento, la velocidad de

rebobinado puede variar un poco.

≥El contador de la cinta se repone a “0:00.00” cuando la cinta se

rebobina desde el comienzo.

≥Según la cinta, esta función podría no obrar.

Es también posible reproducir cintas grabadas en el sistema S-VHS.

≥Pueden tener lugar algunos ruidos según el tipo de cinta utilizada.

≥No es posible conseguir plenamente una resolución más alta que

la que es capaz el S-VHS.

No es posible grabar en el sistema S-VHS con esta unidad.

Durante la reproducción o mientras que está detenida

Mantenga pulsado [1, PLAY] durante

5 segundos o más.

≥En el visualizador aparece la indicación “RP”.

≥Al terminar el programa, la cinta se rebobina hasta

el comienzo y la reproduce nuevamente (esto sólo

funciona si destella al menos 5 segundos al fin del programa). Esto

se repite hasta que se suprime.

∫Para borrar

Pulse [∫, STOP].

Introducción de un cassette de vídeo

Cassette de vídeo

Reproducción de un cassette de vídeo

Lengüeta

Operaciones preliminares

≥Pulse [VHS].

Avance rápido / Rebobinado

Localización progresiva / Rebobinado

Búsqueda Jet

Lento

Rebobinado Jet

Cuasi reproducción S-VHS (SQPB)

Reproducción repetida

VHS

PP-Sample.book 81 ページ２００４年３月８日　月曜日　午後６時３分

Grabación

Operaciones preliminares

≥Seleccione ha unidad que ve el canal (o la entrada AV) en el

televisor.

≥Compruebe que el reloj esté ajustado al tiempo justo.

≥Pulse [VHS].

[1] Inserte un cassette de vídeo que tenga la

lengüeta intacta de protección contra el borrado

accidental.

(l 81)

[2] Pulse [CH, W, X] para seleccionar la estación

TV.

≥Es también posible seleccionar los canales con las teclas

numéricas.

Modo TV (Ondas hertzianas)

por ej., “5”: [0] )[5]

“15”: [1] )[5]

Modo CATV (Cable)

por ej., “5”: [0] )[0] )[5]

“15”: [0] )[1] )[5]

“115”: [1] )[1] )[5]

[3] Pulse [RECMODE] para seleccionar la velocidad

de la cinta.

Cada vez que pulsa la tecla:

SP>EP>VP>SP

[4] Pulse [¥, VHS REC] para iniciar la grabación.

∫Para detener temporalmente la grabación

Pulse [;, PAUSE]. (Pulse nuevamente la tecla para reanudar la

grabación.)

∫Para detener la grabación

Pulse [∫, STOP].

Nota:

≥Aunque el cassette que usa tenga la etiqueta “S-VHS”, no es

posible grabar en el sistema S-VHS con esta unidad. Ésta se

graba en el normal sistema VHS.

≥No puede reproducir grabaciones VP en otro equipo.

≥No puede cambiar canales mientras graba. Puede cambiar

canales mientras está en el modo de pausa.

≥Cuando la grabación está en pausa durante más de 5 minutos, la

unidad vuelve al modo de parada.

∫Para visualizar el tiempo aproximado que queda en la

cinta

[1] Pulse [VHS MENU].

[2] Seleccione “SELECCIONAR CINTA” con [3, 4].

[3] Utilice[2, 1] para seleccionar la correspondiente longitud de la

cinta.

[4] Pulse [STATUS].

El visualizador cambia tan pronto como se pulsa cada vez

[STATUS].

Reloj )Contador )Tiempo que queda en la cinta )Reloj

≥El tiempo que queda en la cinta podría no visualizarse

correctamente según la cinta usada.

∫Para especificar un tiempo para detener la grabación

Durante la grabación

Pulse [¥, VHS REC] para seleccionar el tiempo de

grabación.

≥En la unidad principal, pulse [¥, REC].

Visualización de la unidad

Cada vez que pulsa la tecla:

Contador (suprimir) # 0:30 # 1:00 # 1:30

^------- 4:00 ! 3:00 ! 2:00 !--------}

Referencia

≥Esto no funciona durante las grabaciones temporizadas.

≥Pulsando [∫, STOP] la grabación se detiene y el horario

configurado se borra.

≥El tiempo ajustado se va a borrar si cambia Ud. el modo de

grabación o bien el canal mientras que la grabación está en pausa.

≥l 79

Grabación de programas televisivos

SKIP/INDEX

SLOW/

REW

PLAY

PROG/CHECK

DVD RECVHS REC

REC MODE

ADD/DLT

DUBBING

VHS DVD

POWER

TIME SLIP

CHAPTER

JET REW

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

VHS MENU

RETURN

CM SKIP

CANCEL/RESET

VOLUME

INPUT SELECT

STATUSDISPLAY

AUDIO

TV/VIDEO

DVD/VHS

VHS

DVD

TRACKING/V-LOCK

SUB MENU

DVD/VHS POWER

DVD ERASE

VCR Plus+

OUTPUT

VHS

VHS MENU

REC MODE

;

∫

CH, W, X

3, 4, 2, 1

ENTER

RETURN

STATUS

PROG/CHECK

Teclas

numéricas

Velocidad de la cinta

SP: Puede grabar la longitud señalada en la cinta.

EP: Tres veces la longitud del modo SP.

VP: Cinco veces la longitud del modo SP.

≥Para conseguir una duración de grabación más larga, seleccione

“EP” o “VP”.

≥Si la calidad de la imagen es importante para Ud. o bien si quiere

almacenar la cinta durante un largo período, seleccione “SP”.

≥Esta unidad puede reproducir cintas grabadas con el modo LP en

otro equipo (se enciende “LP” en el visualizador).

Modo VP:

≥“VP” destella en el visualizador de la unidad durante 8 segundos

después de iniciar la grabación.

≥Una cinta grabada en el modo VP por esta unidad no puede

ser reproducida por otro modo VCR. Se recomienda que se la

distingue de otra cinta indicando “VP” en su etiqueta, etc.

≥Lleva más tiempo para que funcione la pista automática cuando

se reproducen cintas en el modo VP y, en algunas cintas, podría

no funcionar de ninguna manera.

Recepción de las transmisiones

televisivas durante la grabación

VHS

PP-Sample.book 82 ページ２００４年３月８日　月曜日　午後６時３分

Ejecución de grabaciones temporizadas

Puede introducir hasta 16 programas con un adelanto de un mes.

Operaciones preliminares

≥Seleccione ha unidad que ve el canal (o la entrada AV) en el

televisor.

≥Compruebe que el reloj esté ajustado al tiempo justo.

≥Inserte un cassette de vídeo que tenga la lengüeta de protección

contra el borrado accidental intacta. (l 81)

≥Pulse [VHS].

Se refiera a “Uso del sistema VCR Plus+”, paso 1–5. (l 80)

≥Cuando se conecte una caja TV de cable o un receptor de satélite,

seleccione el canal en la caja TV de cable o receptor de satélite

antes de que comience la grabación temporizada.

[1] Pulse [PROG/CHECK].

≥Cerciórese de que esté seleccionado “NUEVO PROGRAMA”.

[2] Pulse [ENTER].

[3] Utilice [1] para desplazar y cambiar los detalles

con [3, 4].

≥Pueden usarse las teclas numéricas para introducir “CA”,

“FECHA”, “ACT” y “DES”.

≥CA (Posición del programa/Nombre de la estación de TV)

≥FECHA

Puede crear usted un programa diario o semanal.

≥ACT (hora de encendido)/DES (hora final)

Si mantiene pulsado el botón, el tiempo aumentará o

disminuirá en incrementos de 30 minutos.

≥Velocidad de la cinta

Para cambiar el modo de grabación, puede pulsar también

[REC MODE].

SP,.EP,.VP,.A°,.SP... (l 82)

° Modo SP/EP automático (lderecha)

[4] Al terminar las correcciones pulse [ENTER].

≥“ ” se enciende en el visualizador de la unidad.

≥Para continuar programando:

Seleccione “NUEVO PROGRAMA” y repita los pasos 2–4.

[5] Pulse [RETURN].

Nota

≥“ ” y “1” destella cuando la unidad no puede alcanzar la

grabación temporizada (por ejemplo, el cassette de vídeo sin

lengüeta de protección o bien un cassette de vídeo en su

respectivo compartimento).

≥El tiempo real grabado podría alargarse más allá del programa

mismo cuando los programas TV se graban usando el sistema

VCR Plus_.

≥Si ajusta “HL” (Tiempo de ahorro de la luz del día) a “ACT” cuando

ajusta manualmente el reloj, la grabación temporizada podría no

funcionar cuando del verano cambia al invierno y viceversa.

∫Para detener la grabación mientras un programa está

trabajando

Pulse [∫, STOP], luego [ENTER] dentro de 5 segundos.

≥Puede también seguir pulsando [∫] en la unidad principal durante

más de 3 segundos para detener la grabación.

Si, al comienzo del programa temporizado, no hay cinta bastante

para terminarlo, la función SP/EP hará marchar automáticamente la

cinta a la velocidad EP. Esto garantiza que será grabado el entero

programa. Si el modo EP no es bastante para alargar la cinta que

queda, no será posible grabar todo el programa TV.

≥No es posible activar automáticamente el modo VP.

≥La longitud de la cinta ha de ser ajustada correctamente.

≥Algunas cintas podrían no funcionar correctamente.

≥Si cambia el modo de grabación de SP a EP durante la grabación

temporizada, en aquel punto podría tener lugar una breve

distorsión de la imagen.

Se refiera a “Controle, cambie o borre el programa”, paso 1–5.

(l 80)

≥l 80

∫Precauciones en la grabación temporizada

Cuando llega el tiempo que se definió, la grabación

temporizada inicia automáticamente.

≥La grabación temporizada puede iniciar mientras la unidad

está tanto apagada como encendida. Cuando la unidad está

apagada, el sonido y el vídeo no salen en el televisor.

Uso del sistema VCR Plus+

Programación manual

Modo SP/EP automático

Controle, cambie o borre el programa

Precauciones al usar la grabación

temporizada en DVD y VHS

Programación temporizada

Cinta de vídeo

Primer programa

(30 min.)

30 min. en SP

Segundo programa (60 min.)

15 min.

en SP

45min.

en EP

VHS

PP-Sample.book 83 ページ２００４年３月８日　月曜日　午後６時３分

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby

Laboratories.

“DTS” and “DTS 2.0iDigital Out” are trademarks of Digital

Theater Systems, Inc.

Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and

4,819,098, licensed for limited viewing uses only.

This product incorporates copyright protection technology that is

protected by method claims of certain U.S. patents and other

intellectual property rights owned by Macrovision Corporation and

other rights owners. Use of this copyright protection technology

must be authorized by Macrovision Corporation, and is intended

for home and other limited viewing uses only unless otherwise

authorized by Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

VCR Plus+ and PlusCode are registered trademarks of Gemstar

Development Corporation.

The VCR Plus+ system is manufactured under license from

Gemstar Development Corporation.

Pats. 5,307,173; 5,335,079; 4,908,713; 4,751,578; and 4,706,121

MPEG Layer-3 audio decoding technology licensed from

Fraunhofer IIS and Thomson multimedia.

Panasonic Consumer Electronics

Company, Division of Matsushita

Electric Corporation of America

One Panasonic Way Secaucus,

New Jersey 07094

http://www.panasonic.com

Panasonic Sales Company,

Division of Matsushita Electric of

Puerto Rico, Inc. (“PSC”)

Ave. 65 de Infantería, Km. 9.5

San Gabriel Industrial Park, Carolina,

Puerto Rico 00985

Panasonic Canada Inc.

5770 Ambler Drive

Mississauga, Ontario

L4W 2T3

www.panasonic.ca

C 2004 Matsushita Electric Industrial Co., Ltd.

VQT0H76

F0304Fa0 ( 18000 A )

PP-Sample.book 84 ページ２００４年３月８日　月曜日　午後６時３分

Panasonic DVD Recorder DMR-E75V Manual de usuario

Marca: Panasonic

Modelo: DVD Recorder DMR-E75V

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Este manual también es adecuado para

Descargar PDF

informe

en otros idiomas

English: Panasonic DVD Recorder DMR-E75V User manual

Panasonic DVD Recorder DMR-E75V Manual de usuario

Este manual también es adecuado para

Panasonic DVD Recorder DMR-E75V Manual de usuario

en otros idiomas

Artículos relacionados

Otros documentos