Panasonic DMRE75VS Manual de usuario

Categoría
Reproductores de DVD
Tipo
Manual de usuario

Este manual también es adecuado para

P PC
Operating Instructions
DVD Video Recorder
Model No. DMR-E75V
Dear Customer
Thank you for purchasing this product. For optimum performance
and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read
these instructions completely.
Please keep this manual for future reference.
VQT0H76
For U.S.A. only
The warranty can be found on page 71.
For Canada only
The warranty can be found on page 72.
La guía rápida en español se encuentra en la página 75–83.
PP-Sample.book 1 ページ 2004年3月8日 月曜日 午後6時3分
2
Before Use
THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
(Inside of product)
Warning and Important Information
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
FCC Caution: To assure continued compliance, follow the
attached installation instructions and use only shielded interface
cables when connecting to peripheral devices.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
RQLS0233
VARNING
SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL
ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.
VORSICHT
SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG
GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.
ATTENTION
RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D’OUVERTURE.
EXPOSITION DANGEREUSE AU FAISCEAU.
DANGER
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM.
(FDA 21 CFR)
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM.
(IEC60825-1)
ADVARSEL
SYNLIG OG USYNLIG LASERSTR
Å
LING VED
ÅBNING.
UNDG
Å UDSÆTTELSE FOR STRÅLING.
VARO!
AVATTAESSA OLET ALTTIINA N
ÄKYVÄÄ JA
N
ÄKYMÄTÖN
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
ADVARSEL
SYNLIG OG USYNLIG LASERSTR
Å
LING
NÅR
DEKSEL
ÅPNES.
UNNG
Å EKSPONERING FOR STRÅLEN.
PP-Sample.book 2 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
3
Read these operating instructions carefully before using the unit.
Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy for
future reference.
(1) Read these instructions.
(2) Keep these instructions.
(3) Heed all warnings.
(4) Follow all instructions.
(5) Do not use this apparatus near water.
(6) Clean only with dry cloth.
(7) Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
(8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
(9) Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
(10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
(11) Only use attachments/accessories specified by the
manufacturer.
(12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
(13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
(14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Pages to be referred to are indicated as (l ±±).
The explanations concerning discs are indicated by [DVD], those
concerning video are indicated by [VHS].
(U.S.A. only)
Product Registration Card
Please complete and return the included product registration card, or
register via the Internet at: http://www.prodreg.com/panasonic/
You can enjoy both VHS and DVD with this unit.
This DVD Video recorder records high quality images to rapid
random access capable DVD-RAM media. This has resulted in many
new features that outperform older tape formats. The following
information summarizes a few of these features.
Instant play (l 21, 33)
There is no need to rewind or search forward. Direct Navigator
guides you to the beginning of the recorded video immediately.
Instant recording (l 26)
You no longer need to search for empty disc space. By pressing the
recording button, the unit finds available recording space and begins
recording right away. There is no need to worry about overwriting
already recorded content.
Chasing playback (l 25)
There is no need to wait until recording is complete. Without stopping
recording, you can play the video currently being recorded from its
beginning.
Simultaneous Recording and Play (l 25)
While recording, you can play another video program that was
recorded previously.
Time Slip (l 23, 25)
During play and also while recording, you can jump to the scene you
wish to view by specifying the skip time.
One touch dubbing (l 58, 60)
Memorable contents on VHS can be easily dubbed onto DVD. “One
touch 2-way Transfer/Dubbing” enables you to copy from VHS to
DVD and vice versa.
IMPORTANT SAFETY INSTRUCTIONS
The manufacturer accepts no responsibility and offers no
compensation for loss of recorded or edited material due to a
problem with the unit or recordable media, and accepts no
responsibility and offers no compensation for any
subsequent damage caused by such loss.
Examples of causes of such losses are
A disc recorded and edited with this unit is played in a DVD
recorder or computer disc drive manufactured by another
company.
A disc used as described above and then played again in this
unit.
A disc recorded and edited with a DVD recorder or computer
disc drive manufactured by another company is played in this
unit.
About descriptions in these Operating
Instructions
Accessories
Please check and identify the supplied
accessories. Use numbers indicated in
parentheses when asking for replacement parts.
Only for U.S.A.: To order accessories, refer to
“Accessory Purchases” on page 71.
Only for Canada: To order accessories, call the dealer from
whom you have made your purchase.
1 AC power supply cord
(K2CB2CB00006)
For use with this unit only. Do not use it
with other equipment.
1 75 coaxial cable
(K1TXAAA00001)
1 Audio/Video Cable
(K2KA6CA00001)
2 Batteries for the Remote
Control
R6 size
1 Remote Control
(EUR7721X10)
Useful features
ENGLISH
PP-Sample.book 3 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
4
Before Use
Warning and Important Information ..................................................2
IMPORTANT SAFETY INSTRUCTIONS..........................................3
About descriptions in these Operating Instructions ..........................3
Accessories ......................................................................................3
Useful features..................................................................................3
Contents ...........................................................................................4
Control reference guide ....................................................................6
Remote control...........................................................................6
Batteries .....................................................................................7
Use.............................................................................................7
Main unit.....................................................................................7
The unit’s display........................................................................8
STEP 1 Connection .........................................................................9
Connecting a TV and VCR.......................................................10
Connecting a cable TV box/satellite receiver ...........................11
If the antenna connector doesn’t match..........................................11
Other antenna connections to the unit .....................................11
Other antenna connections from the unit to the TV..................11
Connecting amplifier or system component....................................12
To enjoy multi-channel surround sound on DVD-Video
(digital connection).................................................................12
Connection to a stereo amplifier (analog connection) ..............12
DVD output and DVD/VHS output ..................................................12
STEP 2 Plug-in Auto Tuning..........................................................13
If Plug-in Auto Tuning fails .......................................................14
Adding and deleting channels ..................................................14
STEP 3 Channel settings...............................................................15
Guide channel settings for VCR Plusi system........................15
Channel captions......................................................................16
- Preset Channel Captions.......................................................16
- Manual Channel Captions......................................................16
STEP 4 Set up to match your TV and remote control....................17
Selecting TV type .....................................................................17
TV operation.............................................................................17
When other Panasonic products respond to
this remote control .................................................................17
( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [[DVD]] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ )
Discs...............................................................................................18
Discs you can use ....................................................................18
More about DVD-RAM and DVD-R ..........................................18
Discs that cannot be played............................................................19
Maintenance ...................................................................................19
Disc handling ..................................................................................19
Inserting discs.................................................................................20
Playback
Playing discs...................................................................................21
When a menu screen appears on the TV.................................21
Quick View (Play t1.3) ..................................................................21
Starting play from where you stopped it (Resume Function)..........21
Fast forward and rewind—SEARCH...............................................22
Slow-motion play ............................................................................22
Frame-by-frame viewing.................................................................22
Skipping..........................................................................................22
Direct Play ......................................................................................22
CM Skip ..........................................................................................22
Displaying the TV image as a picture-in-picture/
Selecting an amount of time to skip—Time Slip...........................23
Erasing a title that is being played..................................................23
Create chapters ..............................................................................23
Changing audio during play ............................................................23
Using menus to play MP3 discs......................................................24
Using the tree screen to find a group .......................................24
Recording
Playing while you are recording .....................................................25
Chasing play ............................................................................25
Simultaneous recording and play.............................................25
TIME SLIP................................................................................25
Watching the TV while recording....................................................25
Recording TV programs .................................................................26
Playing/Recording VHS while recording.........................................26
Recording modes and approximate recording times ...............27
Selecting audio to record................................................................27
Flexible Recording mode (FR) .......................................................27
Timer Recording
Using VCR Plus_ system .............................................................. 28
Manual programming .....................................................................28
Check, change or delete programs ................................................29
Cautions for using timer recording on DVD and VHS ....................29
Advanced Operations
DISC SETTING ..............................................................................30
- Disc Name.............................................................................30
- Disc Protection ......................................................................30
- Format disc............................................................................31
- Select First play.....................................................................31
- Finalize ..................................................................................31
Entering text ...................................................................................32
Using the Direct Navigator .............................................................33
Selecting recorded titles to play ...............................................33
Direct Navigator .......................................................................33
- Erase .....................................................................................33
- Properties ..............................................................................33
- Edit ........................................................................................34
- Chapter View.........................................................................35
Using play list .................................................................................36
Creating play lists.....................................................................36
Playing play lists ......................................................................37
Using play list to edit play lists/chapters ..................................37
- Erase .....................................................................................37
- Properties ..............................................................................37
- Edit ........................................................................................38
- Chapter View.........................................................................39
Using DISPLAY menus ..................................................................40
Common procedures ...............................................................40
- Disc menu .............................................................................40
- Play menu .............................................................................41
- Video menu ...........................................................................41
- Audio menu ...........................................................................41
Various Settings
Changing the unit’s settings ...........................................................42
Common procedures ...............................................................42
Entering a password (Ratings).......................................................42
Summary of settings.......................................................................43
Clock Settings ................................................................................46
- Auto Clock Setting.................................................................46
- Time Zone Adjust ..................................................................46
- Manual Clock Setting ............................................................46
FUNCTIONS window .....................................................................47
Status displays ...............................................................................47
Changing the information displayed.........................................47
Display examples.....................................................................47
(^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^[[VHS]]^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^)
Before Use
Inserting video cassette..................................................................48
Video cassette information.............................................................48
Video cassettes........................................................................48
Video cassette care .................................................................48
Maintenance ............................................................................48
Contents
PP-Sample.book 4 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
5
Playback
Playing a video cassette .................................................................49
Fast-forward / Rewind.....................................................................49
Cue / Review ..................................................................................49
Jet Search.......................................................................................49
Slow................................................................................................49
Jet Rewind......................................................................................49
S-VHS Quasi Playback (SQPB) .....................................................50
Repeat Playback.............................................................................50
Adjusting the playback picture........................................................50
Manual tracking........................................................................50
Vertical locking adjustment.......................................................50
Recording
Recording TV programs..................................................................51
Watching the TV while recording....................................................51
Playing/Recording DVD while recording.........................................51
Timer Recording
Using VCR Plus_ system...............................................................52
Manual programming......................................................................52
Auto SP/EP mode...........................................................................53
Check, change or delete programs.................................................53
Cautions for using timer recording on DVD and VHS.....................53
Advanced Operations
Direct Navigator..............................................................................54
To save Direct Navigator data..................................................54
Selecting programs to play.......................................................54
Set the category .......................................................................55
To Check the Recorded Programming Data
(Time Stamp Function).................................................................55
VHS Index Search System (VISS)..................................................55
Various Settings
Changing the unit’s settings............................................................56
Common procedures................................................................56
Summary of settings.......................................................................56
Various on-screen display indications ............................................57
Changing audio...............................................................................57
Auto Bilingual Choice Function.......................................................57
(^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^[[DVD/VHS]]^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^)
Advanced Operations
Transfer (Dubbing) from VHS .........................................................58
One Touch Transfer (Dubbing) (VHS l DVD).........................58
Manual Transfer (Dubbing) ......................................................59
Transfer (Dubbing) from DVD.........................................................60
One Touch Transfer (Dubbing) (DVD l VHS).........................60
Manual Transfer (Dubbing) ......................................................61
Recording from an external device.................................................62
- DVD .......................................................................................62
- VHS .......................................................................................62
Helpful Hints
Glossary..........................................................................................63
Frequently asked questions............................................................64
Error messages ..............................................................................65
Common...................................................................................65
DVD..........................................................................................65
VHS ..........................................................................................65
Troubleshooting guide ....................................................................66
Common...................................................................................66
DVD..........................................................................................68
VHS ..........................................................................................69
Product Service ..............................................................................70
Product information ..................................................................70
Limited Warranty (ONLY FOR U.S.A.) ...........................................71
Limited Warranty (ONLY FOR CANADA).......................................72
Specifications..................................................................................73
Index...............................................................................................74
Español
Antes de uso
Conexión a un televisor o a un VCR ...................................................... 75
( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [[DVD]] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ )
Sintonización automática por enchufe ...........................................76
Ajustes del canal de guía para el sistema VCR Plus+ ...................76
Selección del tipo de televisor........................................................76
Reproducción
Introducción de discos....................................................................77
Reproducción de los discos ...........................................................77
Cuando en el televisor aparece la pantalla de un menú ........................ 77
Vista rápida (Reproducción t1.3)..................................................77
Continuación de la reproducción (Función Resume) .....................77
Avance rápido y rebobinado—SEARCH ........................................77
Reproducción de cámara lenta ......................................................77
Visión cuadro por cuadro ...............................................................78
Salto ...............................................................................................78
Reproducción directa .....................................................................78
Salto CM.........................................................................................78
Visualización de la imagen TV como imagen en imagen/
Selección de la cantidad de tiempo a saltar—Time Slip..............78
Borrado de un título que se está reproduciendo ............................78
Crear capítulos...............................................................................78
Grabación
Reproducción durante la grabación ...............................................79
Reproducción seguida............................................................................ 79
Grabación y reproducción simultáneas .................................................. 79
TIME SLIP.............................................................................................. 79
Recepción de las transmisiones televisivas
durante la grabación ....................................................................79
Grabación de programas televisivos..............................................79
Modos de grabación y tiempo aproximado de grabación....................... 79
Ejecución de grabaciones temporizadas
Uso del sistema VCR Plus+ ........................................................... 80
Programación manual ....................................................................80
Controle, cambie o borre el programa............................................80
Precauciones al usar la grabación temporizada en
DVD y VHS..................................................................................80
(^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^[[VHS]]^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^)
Reproducción
Introducción de un cassette de vídeo.............................................81
Cassette de vídeo ..........................................................................81
Reproducción de un cassette de vídeo..........................................81
Avance rápido / Rebobinado..........................................................81
Localización progresiva / Rebobinado ...........................................81
Búsqueda Jet .................................................................................81
Lento ..............................................................................................81
Rebobinado Jet ..............................................................................81
Cuasi reproducción S-VHS (SQPB)...............................................81
Reproducción repetida ...................................................................81
Grabación
Grabación de programas televisivos..............................................82
Recepción de las transmisiones televisivas
durante la grabación ....................................................................82
Ejecución de grabaciones temporizadas
Uso del sistema VCR Plus+ ........................................................... 83
Programación manual ....................................................................83
Modo SP/EP automático ................................................................83
Controle, cambie o borre el programa............................................83
Precauciones al usar la grabación temporizada en
DVD y VHS..................................................................................83
PP-Sample.book 5 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
6
(1) DVD/VHS POWER on/off button (Í, DVD/VHS POWER)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 13
(2) Input select button (INPUT SELECT) . . . . . . . . . . . . . . .l 62
(3) DVD/VHS output button (OUTPUT, DVD/VHS) . . . . . . . .l 12
(4) Numeric buttons (0–9)
(5) Cancel/Reset and asterisk button (CANCEL/RESET, ¢)
(6) Skip/Index buttons (:, 9, SKIP/INDEX)
(7) Stop button (, STOP)
(8) Top menu and Direct Navigator button
(TOP MENU, DIRECT NAVIGATOR)
(9) Cursor buttons (3, 4, 2, 1)/Frame buttons (2;, ;1)/
Enter button (ENTER)
(10)Sub menu button (SUB MENU)
(11)Manual programming and check button (PROG/CHECK)
(12)Display button (DISPLAY) . . . . . . . . . . . . . . . . . . . . . . . .l 40
(13)VHS recording button (¥, VHS REC) . . . . . . . . . . . .l 51, 61
(14)Recording mode button (REC MODE). . . . . . . . . . . .l 26, 51
(15)Chapter button (CHAPTER)/
Jet rewind button (6 JET REW). . . . . . . . . . . . . . .l 23, 49
(16)DVD erase button (DVD ERASE) . . . . . . . . . . . . . . . . . . .l 23
(17)VHS dubbing button (VHS , DUBBING). . . . . . . . . . . . .l 60
(18)DVD dubbing button (DVD, DUBBING). . . . . . . . . . . . .l 58
(19)DVD recording button (¥, DVD REC) . . . . . . . . . . . .l 26, 59
(20)Add/Delete button (ADD/DLT) . . . . . . . . . . . . . . . . . . . . .l 14
(21)Status display button (STATUS) . . . . . . . . . . . . . . . .l 47, 57
(22)Time slip button (TIME SLIP) . . . . . . . . . . . . . . . . . . .l 23, 25
(23)Return button (RETURN)
(24)Functions (FUNCTIONS)/
VHS menu (VHS MENU) button . . . . . . . . . . . . . . . . .l 47, 56
(25)Pause button (;, PAUSE)
(26)Play button (1, PLAY)
(27)Slow/Search, rewind, forward buttons
(6, 5, SLOW/SEARCH, REW, FF)
(28)CM skip button (CM SKIP) . . . . . . . . . . . . . . . . . . . . . . . .l 22
(29)VCR Plus+ button (VCR Plus+) . . . . . . . . . . . . . . . . .l 28, 52
(30)Audio button (AUDIO). . . . . . . . . . . . . . . . . . . . . .l 23, 27, 57
(31)TRACKING/V-LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 50
/Channel up/down buttons (CH, W, X)
(32)DVD select button (DVD) . . . . . . . . . . . . . . . . . . . . . l above
(33)VHS select button (VHS) . . . . . . . . . . . . . . . . . . . . . l above
(34)TV operation buttons
POWER on/off button (POWER, Í). . . . . . . . . . . . . . . . .l 17
TV/VIDEO input mode select button (TV/VIDEO) . . .l 25, 51
Channel up/down buttons (CH, W, X) . . . . . . . . . . . .l 25, 51
Volume up/down buttons (VOLUME, r, s)
Control reference guide
Remote control
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
POWER
TIME SLIP
CHAPTER
JET REW
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
DVD ERASE
VCR Plus+
OUTPUT
(1)
(34)
(33)
(32)
(31)
(30)
(29)
(28)
(27)
(26)
(25)
(24)
(23)
(22)
(21)
(20)
(18)
(19)
(17)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
[VHS] and [DVD] button
[DVD]
Switch the remote control mode to DVD. Make sure you press
before performing DVD operations. When in DVD mode, the
[DVD] button lights each time you press one of the buttons on
the remote control.
[VHS]
Switch the remote control mode to VHS. Make sure you press
before performing VHS operations. When in VHS mode, the
[VHS] button lights each time you press one of the buttons on
the remote control.
When you press this button in the DVD remote control mode,
it is automatically switched to the VHS remote control mode.
When you press this button in the VHS remote control mode,
it is automatically switched to the DVD remote control mode.
PP-Sample.book 6 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
7
Insert so the poles (i and j) match those in the remote control.
Do not use rechargeable type batteries.
Do not:
mix old and new batteries.
use different types at the same time.
heat or expose to flame.
take apart or short circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may
cause a fire.
Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.
Note
If you cannot operate the unit or TV using the remote control after changing the batteries, please re-enter the codes (l 17).
Aim at the sensor, avoiding obstacles, at a maximum range of
7 m (23 feet) directly in front of the unit.
Keep the transmission window and the unit’s sensor free from
dust.
Operation can be affected by strong light sources, such as
direct sunlight, and the glass doors on cabinets.
Common to DVD/VHS
[A] DVD/VHS POWER on/off button (Í/I, POWER) . . . . . . . l 13
To switch the unit from on to standby mode or vice versa. In
the standby mode, the unit is still consuming a small amount
of power.
[B] Remote control signal sensor. . . . . . . . . . . . . . . . . .l above
[C] S-Video input terminal (S-VIDEO IN) . . . . . . . . . . . . . . . l 62
[D] L2 input terminals (L2). . . . . . . . . . . . . . . . . . . . . . . . . . . l 62
[E] Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 8
[F] One Touch Transfer (Dubbing) operation button
From VHS to DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 58
From DVD to VHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 60
VHS
(1) VHS Search buttons (V/6, 5/W)
(2) Cassette eject button (<, EJECT) . . . . . . . . . . . . . . . . . l 48
(3) VHS Stop button () . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 49
(4) VHS Play button (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 49
(5) Cassette compartment
(6) VHS Channel up/down buttons (CH, W, X) . . . . . . . . . . l 50
(7) VHS Recording button (¥, REC). . . . . . . . . . . . . . . . . . . l 51
DVD
(1) DVD Skip/Slow/Search buttons (:/6, 5/9)
(2) Disc tray open/close button (<, OPEN/CLOSE) . . . . . .l 20
(3) Disc tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 20
(4) Time slip indicator (TIME SLIP) . . . . . . . . . . . . . . . . . . . .l 25
While both recording and play are activated, this indicator
lights up.
(5) DVD Stop button ()
(6) DVD Play/t1.3 button (1/t1.3) . . . . . . . . . . . . . . . . . . . .l 21
(7) DVD Channel up/down buttons (CH, W, X)
(8) DVD Recording button (¥, REC) . . . . . . . . . . . . . . . . . . .l 26
Batteries
Use
R6, AA, UM-3
30
30
20
20
Remote control signal sensor
7 m (23 feet) directly in front of the unit
Main unit
POWER
CH
REC
ᒁ㐿
Í/I
EJECT
OPEN/CLOSE
TIME SLIP
WX
CH
REC
DUBBING
WX
VHS DVD
/k1.3
S-VIDEO IN
VIDEO IN
AUDIO IN
RL/MONO
L2
VHS DVD
[A] [B] [C]
(2) (3) (4) (5) (6)(1)
(1) (3) (4) (5)
(2)
[D] [E] [F](6)(7)
(7) (8)
Off Timer
The unit switches to standby when it is not being used about 6
hours.
You can turn this feature off or change the time to 2 hours.
(l 43, “Off Timer”)
PP-Sample.book 7 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
8
Common to DVD/VHS
[A] Main display
Current time
VHS recording and play counter
Timer recording start time
Miscellaneous messages, etc.
[B] Transfer (Dubbing) direction indicator
[C] Main display
Disc play counter
Timer recording end time
Miscellaneous messages, etc.
VHS
(1) Tape speed indicator (l 51)
SP: When recording or playing in Normal mode.
LP: When playing in Long play mode.
EP: When recording or playing in Extra long play mode.
VP: When recording or playing in five-time (Long play) mode.
(2) VHS output indicator
(3) Remaining tape time indicator
(4) Tape operation status
The operation status of this unit, such as playback,
fast forward, etc.
(5) Channel
(6) Timer program display ( ) (l 52)
On:
When a timer program is registered and recordable tape is
inserted.
Flashes:
When the unit cannot record the registered program (e.g. there
is no tape, etc.) from 2 minutes before starting a timer program
to the end of the timer program.
(7) Tape indicator
DVD
(1) Disc operation status
(2) Disc type
(3) DVD output indicator
(4) Recording mode (l 27)
XP SP LP EP (all on): FR mode (l 27)
(5) Disc indicator
(6) Timer program display ( ) (l 28)
On:
When a timer program is registered and recordable disc is
inserted.
Flashes:
When the unit cannot record the registered program (e.g. there
is no disc, etc.) from 2 minutes before starting a timer program
to the end of the timer program.
(7) Channel position indicator
TRK: track number
GRP: group number
TTL: title number
CHP: chapter number
CH: channel
PL: play list number
Note
A half mirror is used for the unit’s display so the display may
occasionally be difficult to see depending on surrounding
conditions.
The unit’s display
PP-Sample.book 8 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
9
Examples of equipment you can connect to this unit’s terminals
When the unit is not to be used for a long time
To save power, unplug it from the household AC outlet. This unit
consumes a small amount of power even when it is turned off
(approx. 2 W).
Do not connect the unit through a video cassette
recorder
Video signals fed through video cassette recorders will be affected
by copyright protection systems and the picture will not be shown
correctly on the TV.
When connecting to a TV with a built in VCR, connect to the input
terminals on the TV side, not the VCR side.
STEP 1 Connection
TV
Amplifier
This unit
From AUDIO OUT terminals or
DIGITAL AUDIO OUT terminal
From AUDIO/VIDEO OUT terminals
To L1 input terminals (rear) To L2 input terminals (front)
CamcorderVideo cassette recorder
Other equipment
Before moving the unit, ensure the disc tray is empty.
Failure to do so will risk severely damaging the disc and the
unit.
Do not place the unit on
amplifiers or equipment
that may become hot.
The heat can damage the unit.
TV TV
This unit
VCR
VCR
This unit
PP-Sample.book 9 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
10
The equipment connections described are examples.
Before connection, turn off all equipment and read the appropriate operating instructions.
Peripheral equipment and optional cables sold separately unless otherwise indicated.
75 coaxial cable
The picture and sound signal from this unit does not go through the
75 coaxial cable to the TV. Make sure you connect one of the
following terminals on this unit to the TV: the AUDIO/VIDEO OUT
terminal, the S-VIDEO OUT terminal or the COMPONENT VIDEO
OUT terminal. If the TV has none of these terminals, consult your
local dealer.
Refer to page 11 to if the antenna connector doesn’t match.
Connecting a TV and VCR
RF IN
RF OUT
VHF/UHF
R - AUDIO - L
VIDEO
S-VIDEO
IN 1 (L1)
OPTICAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COMPONENT VIDEO OUT
(480P/480I)
YPB PR
R - AUDIO - L
VIDEO
R - AUDIO - L
VIDEO
S-VIDEO
DVD OUT
DVD/VHS COMMON OUT
VHF/UHF
RF IN
VIDEO
OUT
VHF/UHF
RF IN
R L
AUDIO OUT
COMPONENT
VIDEO IN
S VIDEO IN
AUDIO IN
R L
VIDEO IN
4
3
2 1
14
To the
antenna
Outdoor antenna
Cable TV
Indoor antenna
TV
Audio/
Video
cable
Antenna cable
To household AC outlet
Video cassette recorder
Cooling fan
Component
video cable
75coaxial cable
(l below)
AC power supply cord
Connect only after all other
connections are complete.
This unit
75coaxial cable
Audio/Video cable
Splitter
indicates included accessories.
indicates accessories not included.
are required connections. Connect in the numbered order.
To L1
When making this connection,
ensure you connect the audio
cables to the corresponding
audio input terminals on the TV.
COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or progressive output
(l 63) and provide a purer picture than the S-VIDEO OUT terminal.
Connect to terminals of the same color.
S-Video
cable
S-VIDEO OUT terminal
The S-VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT
terminal. (Actual results depend on the TV.)
Red
White
Yellow
Use a splitter if you also
want to connect the
antenna to your VCR.
PP-Sample.book 10 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
11
You need to subscribe to a cable TV or satellite TV service to enjoy viewing their programming.
Consult your service provider regarding appropriate cable TV box or satellite receiver.
You can record and view simultaneously scrambled and
unscrambled channels if connections are made as shown in the
diagram below.
¢ For more information on connections (l 10)
Use one of the following connections to suit the antenna lead.
If your TV has both lead and coaxial VHF terminals, use the lead
connection to minimize signal loss.
A single twin lead
A twin lead and a coaxial cable
Two twin leads
Use one of the following connections to suit the antenna terminals on
your TV. Refer to the TV’s operating instructions.
A twin lead and coaxial plug terminal
A twin lead terminal
Two twin lead terminals
Multiple antenna terminals
Connect to one of the ANT terminals, then change the TV’s setting
as necessary.
Connecting a cable TV box/satellite receiver
RF IN
RF OUT
VHF/UHF
R - AUDIO - L
VIDEO
S-VIDEO
IN 1 (L1)
OPTICAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COMPONENT VIDEO OUT
(480P/480I)
YP
B
P
R
R - AUDIO - L
VIDEO
R - AUDIO - L
VIDEO
S-VIDEO
DVD OUT
DVD/VHS COMMON OUT
OUT
IN
OUT
IN IN
Satellite receiver
75 coaxial cable
This unit
From antenna or
cable TV jack
Cable TV box
From satellite
dish antenna
Audio/Video cable
TV
To AUDIO/VIDEO IN To VHF/VHF RF IN
or
RF IN
RF OUT
VHF/UHF
R - AUDIO - L
VIDEO
S-VIDEO
IN 1 (L1)
OPTICAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COMPONENT VIDEO OUT
(480P/480I)
YP
B
P
R
R - AUDIO - L
VIDEO
R - AUDIO - L
VIDEO
S-VIDEO
DVD OUT
DVD/VHS COMMON OUT
OUT
IN
OUT
IN
OUT2 OUT1
IN
2-way
splitter
Cable TV box
This unit
From cable TV jack
75 coaxial cable
Audio/Video cable
TV
Cable TV
box
To AUDIO/VIDEO IN To VHF/VHF RF IN
If the antenna connector doesn’t match
Other antenna connections to the unit
300–75 transformer
from the antenna
(Flat) Twin lead
300 cable
To this unit’s
RF IN terminal
from the antenna
(Flat) Twin lead 300 cable
To this unit’s
RF IN terminal(Round)
75 coaxial cable
VHF/UHF band mixer
from the antenna
To this unit’s
RF IN terminal
300–75 transformer
(Flat) Twin lead
300 cable
VHF/UHF band mixer
Other antenna connections from the unit
to the TV
VHF/UHF band separator
TV
75 coaxial cable
VHF
UHF
75 coaxial cable
75–300 transformer
TV
VHF or
UHF
75 coaxial cable
VHF/UHF band separator
TV
VHF
UHF
ANT 2
ANT 1
Split out
TV
75 coaxial cable
PP-Sample.book 11 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
12
Connect an amplifier with a built-in decoder
with these logo marks.
Use an optical digital audio cable.
Change the settings in “Digital Audio Output” (l 44).
You cannot use DTS Digital Surround decoders not suited to DVD.
Even if using this connection, output will be only 2 channels when
playing DVD-Audio
This unit has DVD/VHS COMMON output terminals which are
common to both DVD and VHS, and DVD output terminals which are
exclusively used for DVD.
For DVD/VHS COMMON output terminals, both DVD and VHS
outputs can be switched.
The DVD output terminals can only output the DVD signal.
Preparation
Press [DVD].
[1] While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “SETUP” with [3, 4, 2, 1] and press
[ENTER].
[3] Select “Set Up” with [3, 4] and press [2, 1].
[4] Select “DVD/VHS Output” with [3, 4] and press
[ENTER].
[5] Select “Automatic” or “Manual” with [3, 4] and
press [ENTER].
Connecting amplifier or system component
To enjoy multi-channel surround sound on
DVD-Video (digital connection)
OPTICAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COMPONENT VIDEO OUT
(480P/480I)
YP
B
P
R
R - AUD
R - AUD
DVD OUT
OPTICAL IN
(1)
(3)
(4)
(5)
(2)
(1) Rear panel of this unit
(2) Insert fully, with this side
facing up. (Do not bend when
connecting.)
(3) Optical digital audio cable
(not supplied)
(4) To optical digital input
(5) Amplifier’s rear panel
Dolby Digital (l 44)
This is a method of coding digital signals developed
by Dolby Laboratories. Not only stereo (2 channel)
audio, these signals can also be 5.1-channel audio.
A large amount of audio information can be
recorded on one disc by this method.
DTS Digital Surround (l 44)
This surround system is used in many movie
theatres around the world. The separation between
channels is good and the compression ratio is low,
so realistic sound effects are possible.
DTS sound tracks are produced with the assumption
that all channels will be used.
Connection to a stereo amplifier
(analog connection)
OPTICAL
ITAL AUDIO OUT
CM/BITSTREAM)
COMPONENT VIDEO OUT
(480P/480I)
P
B
P
R
R - AUDIO - L
VIDEO
R - AUDIO - L
VIDEO
S-VIDEO
DVD OUT
DVD/VHS COMMON OUT
R L
AUDIO IN
(4)
(5)
(2)
(3)
(1)
(1) Rear panel of this unit
(2) To AUDIO OUT (L/R)
(3) Audio cable (not supplied)
A Red (R)
B White (L)
(4) Audio input (L/R)
(5) Amplifier’s rear panel
DVD output and DVD/VHS output
Even if “Automatic” is selected in “DVD/VHS Output” on
“Set Up” Menu (l 43), the desired output may not be selected
depending on the operation. In this case, press [DVD/VHS
OUTPUT] on the remote controller to switch manually.
When the Video is switched from DVD to VHS or vice versa,
the audio volume may suddenly increase or decrease. This is
because when the audio output of this unit is connected to the
TV or other, the audio output of the DVD is generally lower.
When you increase the volume level of the TV or the amplifier
to play back DVD audio, reduce it when playback is finished.
R - AUDIO
OPTICAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COMPONENT VIDEO OUT
(480P/480I)
YPB PR
R - AUDIO - L
VIDEO
S-VIDEO
DVD OUT
R - AUDIO - L
VIDEO
DVD/VHS COMMON OUT
DVD/VHS COMMON output
DVD output
PP-Sample.book 12 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
13
After plugging the unit into your household AC outlet and pressing
[Í, DVD/VHS POWER] to turn the unit on for the first time, the unit
assists you to set the on-screen language, and automatically tunes in
all the channels it can receive and sets the clock.
The unit automatically determines the type of transmission (airwaves
or cable) and puts them into channels as follows.
Preparation
Turn on the TV and select the appropriate video input to suit the
connections to this unit.
If you connect the unit through a cable TV box or satellite receiver
(l 11), tune to your local PBS for “Auto Clock Setting” to work.
If there is no local PBS, set the clock manually (l 46, “Manual
Clock Setting”).
Press [DVD].
[1] Press [Í, DVD/VHS POWER].
[2] Use [3, 4] to select the language and press
[ENTER].
[3] Press [ENTER] to start Plug-in Auto Tuning.
The unit then proceeds with Auto Clock Setting. The time is
displayed when finished.
DST, Daylight Saving Time, shows the summertime setting.
TIME ZONE shows the time difference from Greenwich mean
time (GMT).
EST (Eastern Standard Time) l GMT j5
CST (Central Standard Time) l GMT j6
MST (Mountain Standard Time) l GMT j7
PST (Pacific Standard Time) l GMT j8
AST (Alaska Standard Time) l GMT j9
HST (Hawaii Standard Time) l GMT j10
For other areas: xx hr
[4] Press [ENTER].
If the clock is an hour slower or faster than the actual
time
Select “j1” ori1” in “Time Zone Adjust” in the SETUP menu
(l 46).
If the unit couldn’t set the clock automatically
Set the time manually (l 46, “Manual Clock Setting”).
To start Plug-in Auto Tuning again (after relocation, for
example)
When the unit is on and stopped
[1] Press and hold [CH, W] and [CH, X] on DVD of the main unit for
about 5 seconds.
The unit turns off.
[2] Press [Í, DVD/VHS POWER] to turn the unit on.
STEP 2 Plug-in Auto Tuning
Band Channel
TV Mode
(Airwaves)
VHF 2–13
UHF 14–69
CATV Mode
(Cable)
VHF 2–13
CATV LOW BAND 95–99
CATV MID/SUPER BAND 14–36
CATV HYPER BAND 37–65
ULTRA BAND
66–94
100–125
SPECIAL CATV CHANNEL 1
3, 4, 2, 1
ENTER
Í
DVD
FUNCTIONS
OUTPUT
POWER
VOLUME
CH
INPUT SELECT
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
OUTPUT
PLAY
PROG/CHECK
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
STATUSDISPLAY
SUB MENU
English
Español
Français
Press ENTER
Pulse ENTER
Appuyer sur ENTER
Select Language
Seleccione la Lengua
Sélection de Langue
Antenna system, channel caption, and guide channel
settings for VCR Plusi system all revert to the default
values when you perform the procedure below. Timer
recording settings are also cleared.
Auto Channel Setting
CH.
Auto Channel Setting
Proceeding . . .
1 1 1
1
Auto Clock Setting
Auto Clock Setting is complete.
4/4/2004 12:15 AM
DST............. ON
TIME ZONE.... CST
PP-Sample.book 13 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
14
Preparation
Press [DVD].
[1]
While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “SETUP” with [3, 4, 2, 1] and press
[ENTER].
[3] Select “Channel” with [3, 4] and press [2, 1].
[4] Select “Antenna System” with [3, 4] and press
[ENTER].
[5] Select “TV” or “CATV” with [3, 4] and press
[ENTER].
[6] Select “Auto Channel Setting” with [3, 4] and
press [ENTER].
[7] Press [ENTER].
Auto Channel Setting starts. This takes a few minutes.
[8] Press [ENTER].
To cancel partway
Press [RETURN].
When you are finished
Press [RETURN].
Add or delete channels if necessary channels are not set or
unnecessary channels are set.
[1] Press the numeric buttons to select a channel.
TV Mode (Airwaves)
e.g., “5”: [0] )[5]
“15”: [1] )[5]
CATV Mode (Cable)
e.g., “5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
“115”: [1] )[1] )[5]
You can also use [CH, W, X] when you are going to delete a
channel.
[2] Press [ADD/DLT].
e.g., the channel is deleted.
If Plug-in Auto Tuning fails
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
TIME SLIP
CHAPTER
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
STATUSDISPLAY
SUB MENU
DVD ERASE
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
POWER
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
VCR Plus+
OUTPUT
3, 4, 2, 1
ENTER
DVD
FUNCTIONS
RETURN
ADD/DLT
CH, W, X
Numeric
Buttons
Manual Channel Captions
VCR Plusi CH Setting
Antenna System
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
Auto Channel Setting
Channel Captions
Preset Channel Captions
CATV
SETUP
SETUP
Adding and deleting channels
Unit’s display
CHANNEL 15 DELETED
PP-Sample.book 14 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
15
Set these guide channels so you can use VCR Plusi system for
timer recording. Before starting the settings, prepare a chart showing
the channels, station names, and guide channels.
e.g.,
° Look up the guide channels for the stations in magazines.
°° Write down all the stations you can receive.
If you have connected a cable TV box or satellite receiver, the
VCR Plus_ system does not work so you do not have to set the
guide channels.
Preparation
Press [DVD].
[1] While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “SETUP” with [3, 4, 2, 1] and press
[ENTER].
[3] Select “Channel” with [3, 4] and press [2, 1].
[4] Select “VCR Plusr CH Setting” with [3, 4] and
press [ENTER].
e.g., “Antenna System” is set to “CATV”.
[5] Use [3, 4] to select the guide channel you want
to set and press [1].
When selecting the guide channel, press and hold [3, 4] to
scroll up and down the screen.
[6] Use [3, 4] to select the channel corresponding
to the guide channel and press [2].
To delete a number, press [CANCEL/RESET, ¢].
Repeat steps 5 and 6 to enter other channels.
[7] Press [ENTER].
To return to the previous screen
Press [RETURN].
When you are finished
Press [RETURN].
STEP 3 Channel settings
Guide channel settings for VCR Plusi
system
Station name
Guide
channel°
Channel
number°°
Channel setting
CBS 04 04 Unnecessary
HBO 33 15
Enter channel 15 next to
Guide Channel 33.
Nickelodeon 38 20
Enter channel 20 next to
Guide Channel 38.
Manual Channel Captions
VCR Plusi CH Setting
Antenna System
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
Auto Channel Setting
Channel Captions
Preset Channel Captions
CATV
SETUP
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
VCR Plusi CH Setting
Guide Channel CATV Channel
---
---
125
1
---
---
2
3
SETUP
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
VCR Plusi CH Setting
Guide Channel CATV Channel
---
4
5
6
---
---
7
8
---
---
SETUP
PP-Sample.book 15 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
16
You can use the preset captions, or manually enter new ones
yourself.
The captions you enter are displayed when the channel is displayed
and in the Direct Navigator screen.
Preparation
Press [DVD].
[1] While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “SETUP” with [3, 4, 2, 1] and press
[ENTER].
[3] Select “Channel” with [3, 4] and press [2, 1].
[4] Select “Preset Channel Captions” with [3, 4]
and press [ENTER].
[5] Use [3, 4] to select the caption and press [1].
You can choose from the following captions.
ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E, AMC,
FAM, MAX, MTV, SHOW, TBS, USA, TNT, CBC, UPN, CTV,
WB, TSN, DSC, GLOB
When selecting the caption, press and hold [3, 4] to scroll up
and down the screen.
[6] Use [3, 4] to select the channel corresponding
to the caption and press [2].
Channels are only displayed if they contain a station and if
captions have not been added manually.
To delete the channel number, press [CANCEL/RESET, ¢].
Repeat steps 5 and 6 as necessary.
[7] Press [ENTER].
[4] Select “Manual Channel Captions” with [3, 4]
and press [ENTER].
[5] Use [3, 4] to select the channel and press [1].
Channels are only displayed if they contain a station and if
preset captions have not been added.
[6] Use [3, 4] to select the first character and
press [1].
You can choose from the following characters:
A–Z, 0–9, -, &, !, /, (space)
To delete the caption, press [CANCEL/RESET, ¢].
Repeat this step to enter the other characters.
[7] Use [2, 1] to return to the “Channel Number”
column.
Repeat steps 5–7 to enter other channels.
[8] Press [ENTER].
Channel captions
PLAY
PROG/CHECK
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
STATUSDISPLAY
SUB MENU
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
POWER
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
VCR Plus+
OUTPUT
3, 4, 2, 1
ENTER
TV, Í
DVD
FUNCTIONS
RETURN
Numeric
Buttons
Manual Channel Captions
VCR Plusi CH Setting
Antenna System
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
Auto Channel Setting
Channel Captions
Preset Channel Captions
CATV
SETUP
1 Preset Channel Captions
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
Preset Captions
Caption Channel Number
---
---
GLOB
ABC
---
---
PBS
CBS
SETUP
1 Manual Channel Captions
To return to the previous screen
Press [RETURN].
When you are finished
Press [RETURN].
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
Manual Captions
Channel Number Caption
AAAA
---
6
---
8
10
---
---
12
23
SETUP
PP-Sample.book 16 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
17
You do not have to change the setting when connected to a 4:3
standard aspect TV that is not compatible with progressive output.
(l 63)
Preparation
Press [DVD].
[1] While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “SETUP” with [3, 4, 2, 1] and press
[ENTER].
[3] Select “TV Screen” with [3, 4] and press
[2, 1].
[4] Select “TV Type” with [3, 4] and press
[ENTER].
Aspect 4:3/Aspect 16:9:
480P/480I:
Select “480P” if the TV is compatible with progressive output.
[5] Use [3, 4] to select the item and press
[ENTER].
You can configure the remote control TV operation buttons to turn
the TV on/off, change the TV input mode, select the TV channel and
change the TV volume.
Point the remote control at the TV
While pressing [Í POWER TV], enter the code
using the numeric buttons.
e.g., 01: press [0] ) [1].
Manufacturer and Code No.
Test by turning on the TV and changing channels. Repeat the
procedure until you find the code that allows correct operation.
If your TV brand is not listed or if the code listed for your TV does
not allow control of your TV, this remote control is not compatible
with your TV.
Change the remote control code on the main unit and on the remote
control (the two must match) if you place other Panasonic products
close together.
Use “1”, the factory set code, under normal circumstances.
Preparation
Press [DVD].
[1] While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “SETUP” with [3, 4, 2, 1] and press
[ENTER].
[3] Select “Set Up” with [3, 4] and press [2, 1].
[4] Select “Remote Control Code” with [3, 4] and
press [ENTER].
[5] Use [3, 4] to select the code (1, 2, or 3) and
press [ENTER].
The code on the unit has been set.
[6] While pressing [ENTER], press and hold for
about 2 seconds the numeric button ([1], [2] or
[3]) corresponding to the code you selected in
step 5.
The code on the remote control has been set.
[7] Press [ENTER].
When the following indicator appears on the unit’s
display
The unit’s remote control code
Change the code on the remote control to match the main unit’s
(l step 6).
STEP 4 Set up to match your TV and remote control
Selecting TV type
TV operation
Panasonic
National
QUASAR
01, 02
PHILIPS (RC-5) 03
RCA 05
SAMSUNG 14, 18, 19
FISHER 10 SANYO 10
GE 05 SHARP 06, 07
GOLDSTAR 15, 16, 17 SONY 08
HITACHI 12 SYLVANIA 03
JVC 11 THOMSON 05
LG 15, 16, 17 TOSHIBA 09
MAGNAVOX 03 ZENITH 04
MITSUBISHI 13
Aspect 4:3 & 480I
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
Aspect 4:3 & 480P
Aspect 16:9 & 480I
Aspect 16:9 & 480P
TV Type
SETUP
4:3
16:9
4:3 standard aspect TV 16:9 widescreen TV
When other Panasonic products respond
to this remote control
To return to the previous screen
Press [RETURN].
When you are finished
Press [RETURN].
PP-Sample.book 17 ページ 2004年3月8日 月曜日 午後6時3分
18
Before Use
[[DVD]]
On DVD-Audio, DVD-Video and Video CD, the producer of the material can control how these discs are played. This means that you may
not be able to control play of a disc with some operations described in these operating instructions. Read the disc’s information for details.
The features you can use with the different types of disc are as follows.
° Possible operations (: enable t: disable)
°° The remaining capacity of the disc will not be increased even if erased.
DVD-RAM
This unit is compatible with the Content Protection for Recordable
Media (CPRM) system so you can record broadcasts that allow
one copy, such as some CATV broadcasts, onto 4.7 GB/9.4 GB
DVD-RAM (these are CPRM compatible). It is not possible to
record onto DVD-R or 2.8 GB DVD-RAM.
DVD-RAMs recorded on this unit cannot be played on incompatible
players.
We recommend using Panasonic’s DVD-RAM, which has
confirmed compatibility with this unit.
The aspect ratio of the recorded images will be the same as that of
the originals.
Protection of cartridge disc
You can protect the contents of your discs.
With the write-protect tab in the protect
position, you cannot record to, edit, or erase
from the disc.
DVD-R
You can play DVD-R on compatible DVD players by finalizing it on
this unit.
The aspect ratio of the recorded images will be 4:3.
DVD-R can be recorded only in either of these audio types (Main or
SAP). Select the desired audio type in “Select MTS” (l 44).
Some broadcasts carry signals that allow you to copy once, but you
cannot record them with DVD-R. Use DVD-RAM to record these
kinds of broadcast.
Before finalizing, erasing titles will not increase the disc’s available
time.
After finalizing, these DVD-R can no longer be recorded on or
edited.
This unit may not be able to play back DVD-Rs other than
Panasonic’s product depending on the recording condition. We
recommend using Panasonic’s DVD-R, which has confirmed
compatibility with this unit.
DVD-R recorded by this unit cannot be reproduced by other
Panasonic DVD recorders in some cases.
Discs
Discs you can use
Disc type Logo
Indication in
these
instructions
Possible operations°
Features
A B C D E
DVD-RAM
4.7 GB / 9.4 GB, 12 cm (5z)
2.8 GB 8 cm (3z)
[RAM] ≤≤≤≤≤
This disc is able to be rewritten and edited. There are
2 types of DVD-RAM, single-sided and double-sided.
The capacity of the double-sided disc is 9.4 GB.
(l below)
DVD-R
4.7 GB 12 cm (5z), 1.4 GB 8 cm (3z)
for General Ver.2.0
4.7 GB 12 cm (5z)
for General Ver.2.0/4k-SPEED
DVD-R Revision 1.0
[DVD-R]
Not finalized
≤≤°°t t
This is a recordable disc with high compatibility and
storage stability. (You cannot rewrite it.) This unit is
capable of recording DVD-R from 1k speed to
4k speed. (l below)
[DVD-V]
Finalized
t≤ttt
DVD-Audio
(Play is in stereo only.)
[DVD-A] t≤tt≤
This is a disc for music with high sound quality.
In this unit, it is played with 2 channels (stereo).
DVD-Video [DVD-V] t≤tt≤
This is marketed software with high picture
quality which already includes movies or
music.
This unit can play discs with symbols
(region number) shown on the right.
Video CD [VCD] t≤tt≤
This is marketed software which already includes
music or video.
Audio CD
(Including discs recorded with
MP3.)
[CD] t≤ttt
This is marketed software which already includes
music or audio. This can be a CD-R or a CD-RW
including music recorded in MP3 compression
technology.
This unit can play finalized CD-R/CD-RW (audio
recording disc) recorded in CD-DA (digital audio),
Video CD or MP3 format. Some CD-R or CD-RW
may not be played due to the condition of the
recording.
[MP3] t≤ttt
ARecording BPlayback CTitle erase/Entering text DCreating play lists ESelecting audio
Visit Panasonic’s homepage for more information about DVDs. http://www.panasonic.com/playDVD-R
More about DVD-RAM and DVD-R
1
ALL
2
4
1
PROTECT
DVD
PP-Sample.book 18 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
19
2.6 and 5.2 GB DVD-RAM, 12 cm (5z)
3.95 and 4.7 GB DVD-R for Authoring
Unfinalized DVD-R recorded on other equipment
PAL discs (you can still play the audio on DVD-Audio)
DVD-Video with a region number other than “1” or “ALL”,
DVD-ROM, DVD-RW, iR, iRW, CD-ROM, CDV, CD-G, Photo CD,
CVD, SVCD, SACD, MV-Disc, PD, Divx Video Disc, etc.
The precision parts in this unit are readily affected by the
environment, especially temperature, humidity, and dust.
Cigarette smoke also can cause malfunction or breakdown.
To clean this unit, wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this unit.
Before using chemically treated cloth, read the instructions for the
cloth carefully.
Observe the following points to ensure continued listening and
viewing pleasure.
Dust and dirt may adhere to the unit’s lenses over time, possibly
making it impossible to record or play discs.
Use the recommended DVD-RAM/PD Lens cleaner
(LF-K123LCA1) about once every year, depending on frequency of
use and the operating environment.
Read the lens cleaner’s instructions carefully before use.
How to hold a disc
Do not touch the recorded surface.
If there is dirt or condensation on the disc
[RAM] [DVD-R]
Clean with an optional DVD-RAM/PD Disc cleaner (LF-K200DCA1,
where available).
Do not use cleaners for CDs or cloths.
[DVD-A] [DVD-V] [VCD] [CD]
Wipe with a damp cloth and then wipe dry.
Handling precautions
Do not attach labels or stickers to discs. (This may cause disc
warping and un-balanced rotation, rendering it unusable.)
Do not write on the label side with a ball-point pen or other writing
instrument.
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
Do not use scratch-proof protectors or covers.
Do not use the following discs:
-
Disc with exposed adhesive from removed stickers or labels
(rented discs, etc.).
-
Discs that are badly warped or cracked.
-
Irregularly shaped discs, such as heart shapes.
Do not place in the following areas:
-
In direct sunlight.
-
In very dusty or humid areas.
-
Near a heater.
Discs that cannot be played
Maintenance
Disc handling
DVD
PP-Sample.book 19 ページ 2004年3月8日 月曜日 午後6時3分
Before Use
20
[1] Press [<, OPEN/CLOSE] on the main unit to
open the tray.
You can insert a cartridge or non-cartridge disc.
[2] Press [<, OPEN/CLOSE] on the main unit to
close the tray.
If you insert a DVD-RAM with the write-protect tab set to
“PROTECT” (l 18), play starts automatically.
Note
Load double-sided discs so the label for the side you want to
record/play is facing up.
It is not possible to record continuously from one side of a double
sided disc to the other. You will need to eject the disc and turn it
over.
When using 8 cm (3q) DVD-RAM, remove the disc from the
cartridge and insert it, making sure you align it with the groove.
Inserting discs
(2)
(3)
(1)
Non-cartridge disc
Cartridge disc
(1) Insert label-up.
(2) Insert inside the tray’s guides.
(3) Insert label-up with the arrow facing in.
DVD
PP-Sample.book 20 ページ 2004年3月8日 月曜日 午後6時3分
21
Playback
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
[1] Press [Í, DVD/VHS POWER] to turn the unit on.
[2] Insert a disc.
(l 20)
[3] Press [1, PLAY].
The disc tray closes and play begins.
(The unit takes some time to read the disc before play starts.)
Playback starts from the most recently recorded title.
[RAM] [DVD-R]
Playback starts from the beginning of the disc.
[DVD-A] [DVD-V] [VCD] [CD] [MP3]
To stop play
Press [, STOP]. (l right, “Resume
Function”)
A screen similar to the one on the right
may appear when you stop play. Press
[, STOP] again and you can use this
unit’s tuner to watch TV. [DVD-A] [DVD-V]
[VCD] [CD] [MP3]
To pause play
Press [;, PAUSE]. (Press again to restart play.)
[DVD-A] [DVD-V] [VCD]
[VCD]
Press the numeric buttons to select an item.
e.g.: “5”: [0] )[5]
“15”: [1] )[5]
[DVD-A] [DVD-V]
Press [3, 4, 2, 1] to select an item and press [ENTER].
You can also use the numeric buttons to select an item.
Other buttons used to operate menus
Read the disc’s instructions for further details about operation.
Note
If “ ” appears on the TV, the operation is prohibited by the unit or
disc.
[RAM] (Only with Dolby Digital)
The play speed can be increased
without distorting the audio.
During Play
Press and hold [1, PLAY].
To return to normal speed
Press [1, PLAY].
Note
Output is in PCM when using a digital connection (l 12).
This is cancelled when you perform skip, pause, or when play
reaches a point where a program recorded in sound other than
Dolby Digital starts.
This does not work if the setting is “Off” in “Search Audio & PLAY
t1.3” (l 44).
This does not work when recording is in XP or FR mode during
simultaneous recording and play (l 25). [RAM]
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
[1] During play
Press [, STOP].
“PB” flashes on the unit’s display (Normal play only). The unit
memorizes the position.
[2] Press [1, PLAY].
Play starts from where you stopped it.
To cancel the resume function (Normal play only)
Press [, STOP] while the unit remembers the
position.
(The position is also cleared when you turn the
unit off.)
Playing discs
Preparation
Press [DVD].
1
;
3, 4, 2, 1
ENTER
Í
DVD
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
POWER
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
VCR Plus+
OUTPUT
Numeric
Buttons
When a menu screen appears on the TV
Quick View (Play t1.3)
Starting play from where you stopped it
(Resume Function)
PLAY
DVD-RAM
PLAY x1.3
DVD-RAM
e.g.: Normal play
DVD
PP-Sample.book 21 ページ 2004年3月8日 月曜日 午後6時3分
Playback
22
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
During play
Press [6, SLOW/SEARCH] or [5,
SLOW/SEARCH].
On the main unit, press and hold [:/6] or [5/9].
There are 5 search speeds. Each press increases the search
speed.
Press [1, PLAY] to restart playback.
Sound is output only in the first level of fast forward. In the case of
DVD-A (except moving picture parts), CD and MP3, it is output in
all levels.
You can turn this sound off if you want to (l 44, “Audio”—“Search
Audio & PLAY t1.3”).
[RAM] [DVD-R] [DVD-A] (Motion picture parts only) [DVD-V] [VCD]
While paused
Press [6, SLOW/SEARCH] or [5, SLOW/
SEARCH].
On the main unit, press and hold [:/6] or [5/9].
When slow motion play is continued for about 5 minutes it pauses
automatically.
The speed increases up to 5 steps.
Press [1, PLAY] to restart playback.
Forward direction ([5], [5/9]) only. [VCD]
[RAM] [DVD-R] [DVD-A] (Motion picture parts only) [DVD-V] [VCD]
While paused
Press [2;], [;1], [2] or [1].
Each press shows the next or previous frame.
Press [1, PLAY] to restart playback.
Forward direction ([;1], [1]) only. [VCD]
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
During play or while paused
Press [:, SKIP] or [9, SKIP].
On the main unit, press [:/6] or [5/9].
Each press increases the number of skips.
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
Starting play from a selected title, chapter or track.
During play
Press the numeric buttons to select the item.
e.g.: “5”: [0] )[5] [MP3] “5”: [0] )[0] )[5]
“15”: [1] )[5] “15”: [0] )[1] )[5]
[DVD-A]
A group number can be specified while the
screen saver is displayed.
e.g.: “5”: [5]
This works only when stopped (screen
saver is displayed) with some discs.
Playing bonus groups
Some discs contain bonus groups. If a
password screen appears after selecting a group, enter the
password with the numeric buttons and press [ENTER]. Refer also
to the disc’s jacket.
[RAM] [DVD-R]
You can skip approximately 1 minute with one press.
During play
Press [CM SKIP].
Preparation
Press [DVD].
Fast forward and rewind—SEARCH
Slow-motion play
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
POWER
TIME SLIP
CHAPTER
JET REW
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
DVD ERASE
VCR Plus+
OUTPUT
1
2, 1
2;, ;1
ENTER
DVD
AUDIO
CM SKIP
TIME SLIP
CHAPTER
DVD ERASE
6, 5
:, 9
Numeric
Buttons
L R
t2
DVD-RAM
••••
Frame-by-frame viewing
Skipping
Direct Play
CM Skip
Screen saver
DVD
PP-Sample.book 22 ページ 2004年3月8日 月曜日 午後6時3分
Playback
23
[RAM] [DVD-R]
Skips the specified time.
Displays the TV image being received as a picture-in-picture.
[1] During play
Press [TIME SLIP]. (Press again to cancel.)
You will hear the playback audio.
The blue background does not appear on the receiving screen
even if you select “On” from “Blue Background” in the SETUP
menu (l 45).
[2] Press [3, 4] to enter the time and press
[ENTER].
The time indicator will go off after about 5 seconds, but will turn
on again when you set the indicator.
Play skips the amount of time you entered.
Press to alter in 1-minute units. Press and hold to alter in
10-minute units.
(1)Play images
(2)Current receiving images
You can change the channel being received by pressing
[CH, W, X].
You cannot change the channel being received while
recording.
To show the play images in full
Press [TIME SLIP].
[RAM] [DVD-R]
You can erase titles while playing.
A title cannot be restored once it is erased. Make certain before
proceeding.
[1] During play
Press
[DVD ERASE].
[2] Select “Erase”
with [2] and
press [ENTER].
For your reference
It is not possible to erase a title when you are carrying out
simultaneous recording and play (l 25). [RAM]
It is not possible to erase a title that is in the process of being
recorded.
The available recording time on DVD-R does not increase when
you erase titles.
[RAM]
[1] During play
Press [CHAPTER].
Press [:, SKIP] or [9, SKIP] to skip to the start of a
chapter.
You cannot activate this function when recording and playing at
the same time.
[RAM] [DVD-A] [DVD-V] [VCD]
You can change the audio being played.
Press [AUDIO] to select the audio type.
[RAM] [VCD] (l 47)
LR#L#R
^--------------}
When playing an SAP
broadcast recorded in
DVD-RAM:
MAIN ()SAP
[DVD-A] [DVD-V] (l 40)
You can change the audio channel number by pressing [AUDIO].
This allows you to change items like the sound track language.
e.g.: [DVD-V] English is the selected language.
Note
If you cannot change the audio type when you have used only an
optical digital cable for connection, set “Dolby Digital” to “PCM”
(l 44). Alternatively, you may connect to an amplifier with an Audio/
Video cable and change the input on the amplifier to suit the
connection.
Displaying the TV image as a picture-in-
picture/
Selecting an amount of time to skip
Time Slip
Erasing a title that is being played
0 min
–5 min
(1)
(2)
PLAY
CH8
PLAY
CH8
Erase
Erase Cancel
0 : 58(SP)
Corresponding play list chapters will be erased.
Time remaining after erase
Create chapters
Changing audio during play
PLAY
L R
DVD-RAM
e.g.: [RAM]
“L R” is selected
Sound track
1 ENG Î Digital 3/2.1ch
DVD
PP-Sample.book 23 ページ 2004年3月8日 月曜日 午後6時3分
Playback
24
[MP3]
This unit plays MP3 files recorded on CD-R/RW designed for audio
recording that are finalized (l 63) on a computer. Files are treated
as tracks and folders are treated as groups.
[1] During stop or play
Press [TOP MENU].
The file list appears.
[2] Press [3, 4] to select the track and press
[ENTER].
Play continues to the last track in the last group.
” indicates the track currently playing.
You can also directly select the track with the numeric buttons.
e.g.: The track “006.mp3” of Group “002” in the illustration on
the right,
“6”: [0] )[0] )[6]
The track “010.mp3” of Group “003” in the illustration on
the right,
“10”: [0] )[1] )[0]
To show other pages
Select2 Prev.” or “Next 1” with [3, 4, 2, 1] and press [ENTER].
After listing all the tracks in one group, the list for the next group
appears.
To exit the file list
Press [TOP MENU] or [RETURN].
[1] While the file list is displayed
Press [1] while a track is highlighted to display
the tree screen.
A folder which has no MP3 files is indicated in black. You
cannot select groups with no MP3 files.
[2] Press [3, 4] to select a group and press
[ENTER].
The file list for the group appears.
For your reference
Press [2, 1] to jump layers in the tree screen.
To return to the file list
Press [RETURN].
Tips for making MP3 discs
Discs must conform to ISO9660 level 1 or 2 (except for extended
formats).
Compatible compression rate: from 32 kbps to 320 kbps
Compatible sampling rate:16 kHz, 22.05 kHz, 24 kHz, 32 kHz,
44.1 kHz, 48 kHz
Maximum number of tracks and groups recognizable: 999 tracks
and 99 groups
This unit is compatible with multi-session.
This unit is not compatible with ID3 tags or packet writing.
Depending on recording, some items may not be playable.
Reading or play of the disc may take time if there are a lot of still
pictures or sessions.
The display order may differ from how the order is displayed on a
computer.
Naming folders and files
At the time of recording, give folder and file names a 3-digit numeric
prefix in the order you want them to play (this may not work at times).
MP3 files must have the extension “.MP3” or “.mp3”.
English alphabet and Arabic numerals are displayed properly.
Other characters may not be displayed properly.
Preparation
Press [DVD].
Using menus to play MP3 discs
1
DVD
RETURN
TIME SLIP
TV/VIDEO
DIRECT NAVIGATOR
TOP MENU
3, 4, 2, 1
ENTER
CH, W, X
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
POWER
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
VCR Plus+
OUTPUT
Numeric
Buttons
MENU
0 9
No.
No. GROUP
TOTAL TRACK TREE
1
001 Both Ends Freezing
1
: MP3_MUSIC
Prev. Next
G 1
T 1
TOTAL
1/ 24
G:
The Group Number
T:
Track Number in the Group
TOTAL:
Selected Track Number/
Total Track Number
Selected Group No. and Name
Using the tree screen to find a group
MENU
0 9
No.
G 1
T 1
TOTAL
1/ 24
3
3
MP3_MUSIC
001 My favorite
001 Brazillian pops
002 Chinese pops
003 Czech pops
004 PC Files
005 Japanese pops
006 Swedish pops
001 Momoko
002 Standard Number
001 Piano solo
002 Vocal
G 1/ 15
TREE
Selected Group Number/Total
Group Number
If the group has no track, “– –”
is displayed as group number.
002
001001
008.mp3
009.mp3
010.mp3
003
001.mp3
002.mp3
003.mp3
004.mp3
005.mp3
006.mp3
007.mp3
Folder = Group
Track total = Total
File = Track
DVD
PP-Sample.book 24 ページ 2004年3月8日 月曜日 午後6時3分
25
Recording
[RAM]
Preparation
Press [DVD].
Hint
Sound is not output while fast-forwarding.
You can start play from the beginning of the title while continuing to
record it.
While recording or timer recording
Press [1, PLAY].
Time Slip indicator on the main unit lights.
For your reference
Play cannot be started until at least 2 seconds after recording
starts.
You can start play of the title you are recording or play a title
previously recorded.
While recording or timer recording
[1] Press [DIRECT NAVIGATOR].
[2] Use [3, 4, 2, 1] to select a title and press
[ENTER].
Time Slip indicator on the main unit lights.
To exit the Direct Navigator screen
Press [DIRECT NAVIGATOR].
For your reference
During simultaneous recording and play, you cannot edit or erase
with the Direct Navigator or play lists.
If you start play while the unit is on standby for timer recording,
recording starts when the time you set is reached.
You can play the title being recorded to check that it is being
recorded correctly. You can also check parts that were recorded
previously.
While recording or timer recording
[1] Press [TIME SLIP].
Time Slip indicator on the
main unit lights. Play
starts from 30 seconds
previous to that moment.
What is currently being
recorded appears as a
picture-in-picture and you
will hear the playback
audio.
(1) Play images
(30 seconds before)
(2) Current recording
[2] Press [3, 4] to
select the time
and press
[ENTER].
The time indicator will go
off after about
5 seconds, but will turn
on again when you set
the indicator.
Press [3, 4] to alter in
1-minute units. Press
and hold [3, 4] to alter in 10-minute units.
To show the play images in full
Press [TIME SLIP].
Press [TIME SLIP] to return to the picture-in-picture screen.
For your reference
The image on the small screen may be distorted or flicker
depending on the scene. However, this does not affect the image
recorded.
[1] Press [TV/VIDEO] to change the input mode to
“TV”.
[2] Press TV’s [CH, W, X] to select the desired TV
channel.
For your reference
You can also do this if the unit is making a timer recording.
The recording is unaffected.
Playing while you are recording
Chasing play
Simultaneous recording and play
- -
DIRECT NAVIGATOR TITLE VIEW
DVD-RAM
09
- -- -- -
0807
10 10/25 MON 8 10/25 MON 8 10/26 TUE
e.g.:
You want to watch the
movie you recorded
yesterday (title 08)
while recording sport
(title 09).
Title 08 is played back
while title 09 is being
recorded.
¥: Currently recording
Selecting title 08
TIME SLIP
To stop play and recording
[1] Press [, STOP]. Play stops.
(Wait 2 or more seconds)
[2] Press [, STOP]. Recording stops.
You cannot stop recording with [, STOP] during timer
recording. To stop timer recording, press [, STOP], then
[ENTER] within 5 seconds.
- You can also press and hold [] on the main unit for more
than 3 seconds to stop timer recording.
Watching the TV while recording
PLAY
0 min
REC
(2)
(1)
PLAY
–5 min
REC
DVD
PP-Sample.book 25 ページ 2004年3月8日 月曜日 午後6時3分
Recording
26
[RAM] [DVD-R]
You can record up to 99 titles on a disc.
DVD-RAM/DVD-R have limitations on recording (l 18).
Recording will take place on open space on the disc. Data will not
be overwritten.
If there is no space left on the recording disc, you will need to erase
unwanted titles (l 23, 33) or use a new disc.
Preparation
Release protection (disc l 30, cartridge l 18). [RAM]
Press [DVD].
[1] Press [Í, DVD/VHS POWER] to turn the unit on.
[2] Insert a disc.
(l 20)
When using a DVD-RAM for the first time with this unit, format
it to ensure accurate recording (l 31, “Format disc”).
[3] Press [CH, W, X] to select the channel.
To select with the numeric
buttons:
TV Mode (Airwaves)
e.g., “5”: [0] )[5]
“15”: [1] )[5]
CATV Mode (Cable)
e.g., “5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
“115”: [1] )[1] )[5]
[4] Press [REC MODE] to select the recording
mode.
Remaining time on the disc
[5] Press [¥, DVD REC] to start recording.
You cannot change the channel or recording mode during
recording. You can change them while recording is paused, but
the material is recorded as a separate title.
To pause recording
Press [;, PAUSE]. (Press again to restart recording.)
Title is not split into a separate title.
To stop recording
Press [, STOP].
Recorded as 1 title until the position where stopped.
DVD-R takes about 30 seconds for the unit to complete recording
management information after recording finishes.
To specify a time to stop recording
While recording
Press [¥, DVD REC] to select the recording time.
On the main unit, press [¥, REC].
Unit’s Display
Each time you press the button:
Counter (cancel) # 0:30 # 1:00 # 1:30
^------- 4:00 ! 3:00 ! 2:00 !--------}
For your reference
This does not work during timer recordings or Flexible Recording.
Recording stops and the set time is cleared if you press [,STOP].
The set time is cleared if you change the recording mode or
channel while recording is paused.
You can watch play or record tapes while recording. The recording
will not be affected.
VHS playback (l 49)
VHS recording (l 51)
-
When a tuner channel is being recorded on DVD, you can only
record the same channel on VHS.
Preparation
Press [DVD].
Recording TV programs
Í
DVD
RETURN
AUDIO
FUNCTIONS
STATUS
REC MODE
3, 4, 2, 1
ENTER
CH, W, X
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
POWER
TIME SLIP
CHAPTER
JET REW
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
DVD ERASE
VCR Plus+
OUTPUT
;
µ
Numeric
Buttons
Playing/Recording VHS while recording
DVD
PP-Sample.book 26 ページ 2004年3月8日 月曜日 午後6時3分
Recording
27
Depending on the content being recorded, the recording times may
become shorter than indicated.
(Unit: hour)
° When “Recording Time in EP Mode” has been set to “EP (6H)” in
the SETUP menu (l 43).
The sound quality is lower compared to other recording modes
when using “EP (8H)”.
Note
When recording to DVD-RAM using EP (8H) mode, play may not be
possible on DVD players that are compatible with DVD-RAM. In this
case use EP (6H) mode.
FR (Flexible Recording mode):
The unit automatically selects a recording rate between XP and
EP (8H) that will enable the recordings to fit in the available
recording time on the disc with the best possible recording quality.
You can use this function in manual transfer (l 59) or timer
recording (l 28).
All recording mode indicators on the unit’s display are lit during FR.
[RAM]
Preparation
Press [DVD].
Press [AUDIO].
If you change the sound setting while recording, the recorded
sound will also change.
[DVD-R]
Select the audio (Main or SAP) in “Select MTS” in
the SETUP menu
(l 44).
[RAM] [DVD-R]
The unit calculates a recording rate that enables the recording to fit
in the time you set (within the remaining time on the disc) with the
best picture quality.
Preparation
Press [DVD].
Select the channel to record.
[1] While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “FLEXIBLE RECORDING” with [3, 4, 2,
1] and press [ENTER].
[3] Press [3, 4, 2, 1] to set the recording time.
You can also set the recording time with the numeric buttons.
Maximum recording time is 8 hours.
[4] Select “Start” with [3, 4, 2, 1] and press
[ENTER].
Recording starts.
For your reference
It is not possible to change channel or recording mode while
Flexible Recording is paused.
To exit the FLEXIBLE REC window without recording
Press [RETURN].
To stop recording partway
Press [, STOP].
To show the time
remaining until recording
finishes
Press [STATUS] several times.
It is displayed in units of minutes.
Recording modes and approximate
recording times
DVD-RAM
DVD-R
(4.7 GB)
Single-sided
(4.7 GB)
Double-sided
(9.4 GB)
XP (High quality) 1 2 1
SP (Normal) 2 4 2
LP (Long play) 4 8 4
EP (Extra long play) 8 (6°) 16 (12°)8 (6°)
Selecting audio to record
[.
l
l
l
l
l
l
{-
Stereo:
v
Main audio (stereo)
If the broadcast is “Mono_SAP”, audio will be
monaural even if you select Stereo mode.
SAP:
v
Secondary audio program (SAP)
If recorded in SAP mode, main audio is also
recorded.
Mono: Main audio (monaural)
Select “Mono” if reception is poor during a
stereo broadcast.
EP (6H)°
EP (8H)
LP
SP
XP
Picture quality
Recording time
CH12
No Disc
((Stereo
e.g., “Stereo” is selected.
“((” appears when the unit is receiving
the audio type you selected.
Flexible Recording mode (FR)
e.g.: disc is DVD-RAM
ARecorded
BRemained (45 min.)
Recordable for 45 minutes in SP mode
CProgram to be recorded
(The program is 60-minute long.)
DThe recording mode automatically switches from SP to LP
according to the remaining time.
EThe program exactly fits into the remaining time.
Before FR
After FR
FLEXIBLE REC
Start Cancel
Record in FR mode
Set recording time
1 Hour 23 Min.Maximum rec time
1 Hour 23 Min.
CH12
REC 1:22
Stereo
DVD-RAM
Remaining
time
DVD
PP-Sample.book 27 ページ 2004年3月8日 月曜日 午後6時3分
28
Timer Recording
[RAM] [DVD-R]
You can enter up to 16 programs up to a month in advance.
Preparation
Release protection (disc l 30, cartridge l 18). [RAM]
Insert a disc (l 20) and confirm there is sufficient empty space for
recording on it (l 47).
Press [DVD].
Entering the PlusCode numbers is an easy way of timer recording.
You can find these codes in TV listings in newspapers and
magazines.
When connecting a cable TV box or satellite receiver, the VCR
Plusi system does not work. Program the timer recording
manually (l right).
[1] Press [VCR Plus_].
[2] Press the numeric buttons to enter the
PlusCode number.
Press [2] to move back to correct a digit.
[3] Press [ENTER].
Confirm the program
and correct it if
necessary using [3,
4, 2, 1] (l right,
step 3).
When “XP” is
displayed in the unit’s display, the recording mode
automatically changes to “FR” in order to prevent loss of
recording when there is not enough space. Change to “XP”
mode if you want to set timer recording using “XP” mode.
“Invalid Entry” is displayed when you enter the wrong PlusCode
number. Reenter the PlusCode number.
To enter the title of the program
Press [2, 1] to select “Enter Name” and press [ENTER]
(l 32).
[4] If the program is
correct
Press [ENTER].
” lights on the
unit’s display.
Repeat steps 1–4 to
program other
recordings.
[5] Press [RETURN].
When connecting a cable TV box or satellite receiver, select the
channel on the cable TV box or satellite receiver before timer
recording starts.
[1] Press [PROG/CHECK].
Make sure “New Timer Program” is selected.
[2] Press [ENTER].
[3] Use [1] to move and change the items with
[3, 4].
You may use the numeric buttons to enter “CHANNEL”,
“DATE”, “ON” and “OFF”.
CHANNEL (Program Position/TV Station Name)
DATE
You can also make a daily or weekly program.
Each daily or weekly program is counted as one program.
ON (start time)/OFF (finish time)
The time increases or decreases in 30-minute increments if
you hold down the button.
MODE (Recording mode)
You can also press [REC MODE] to change the recording
mode.
XP,.SP,.LP,.EP,.FR,.XP... (l 27)
Enter Name
Press [2, 1] to select “Enter Name” and press [ENTER]
(l 32).
[4] Press [ENTER]
when you have
finished making
changes.
” lights on the
unit’s display.
To continue
programming:
Select “New Timer Program” and repeat steps 2–4.
[5] Press [RETURN].
Caution for Timer recording
Timer recording automatically starts at the set time.
Timer recording can be started whether the unit is turned on or
off. When the unit is turned off, the sound and the video cannot
be outputted to the TV.
Using VCR Plus_ system
DVD
RETURN
VCR Plusi
PROG/CHECK
REC MODE
3, 4, 2, 1
ENTER
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
POWER
TIME SLIP
CHAPTER
JET REW
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
DVD ERASE
VCR Plus+
OUTPUT
Numeric
Buttons
VCR Plus+
Remaining Recording Time
4:00 LP
12:53 PM7/13 TUE
MODE
OFFON
CHANNEL
DATE
TIMER
RECORDING
Remaining Recording Time
4:00 LP
39 7/ 6 TUE 21:00 PM20:00 PM SP
Enter Name
12:53 PM7/13 TUE
Manual programming
TIMER
RECORDING
Remaining Recording Time
4:00 LP
SP
OK
21:00 PM20:00 PM39 7/ 6 TUE01
MODE CHECK
OFFONNo
CHANNEL
DATE
New Timer Program
12:57 PM7/13 TUE
Check to make sure “OK” is displayed.
TIMER
RECORDING
Remaining Recording Time
4:00 LP
MODE CHECK
OFFONNo
CHANNEL
DATE
New Timer Program
12:57 PM7/13 TUE
7/ 6 TUE01 SP
OK
21:00 PM20:00 PM39
Highlighted line
is ready for
programming.
MODE
OFFON
CHANNEL
DATE
TIMER
RECORDING
Remaining Recording Time
4:00 LP
Enter Name
12:53 PM7/13 TUE
: :
TIMER
RECORDING
Remaining Recording Time
4:00 LP
MODE CHECK
OFFONNo
CHANNEL
DATE
New Timer Program
12:57 PM7/13 TUE
7/ 6 TUE01 SP
OK
21:00 PM20:00 PM39
7/24 SAT02 SP
OK
3:00 PM 2:30 PM64 ABC
Check to make sure “OK” is displayed.
DVD
PP-Sample.book 28 ページ 2004年3月8日 月曜日 午後6時3分
Timer Recording
29
Note
” flashes when the unit cannot perform timer recording (non-
recordable disc or protected disc, etc.). Check the disc carefully.
The actual time recorded may be longer than the program itself
when TV programs are recorded using VCR Plus_ system.
When recording more than one program in a row, for DVD-RAM the
first few seconds, and for DVD-R about the first 30 seconds of all
programs from the second one onwards will not be recorded.
If you set “DST” (Daylight Saving Time) to “ON” when manually
setting the clock (l 46), timer recording may not work when
summer switches to winter and vice versa.
When the unit is carrying out a timer recording:
-
You may utilize playback.
When the disc is not inserted, the disc is full or a non-recordable
disc is inserted, the warning message appears because Timer
Recording is disabled.
To stop recording while a program is working
Press [, STOP], then [ENTER] within 5 seconds.
You can also press and hold [] on the main unit for more than 3
seconds to stop recording.
Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Preparation
Press [DVD].
[1] Press [PROG/CHECK].
Icon explanations (A)
¥ Now recording
W Programs are overlapped. Recording of the program with the
later start time starts before the earlier program finishes
recording.
n You stopped a weekly or daily timer recording. The icon
disappears the next time the timer starts recording.
F The disc was full. (no enough space)
The TV program is not allowed to record by copy-guard.
X Recording stopped (Dirty disc, etc.)
CHECK (B)
OK: Recordable
# (Date): The last day of daily or weeky recording.
!: Recording stopped (no disc or protected disc, etc.)
[2] Press [3, 4] to select the program.
You may also select program by inputting a 2-digit number
using the numeric buttons.
e.g.: “5”: [0] )[5]
“15”: [1] )[5]
Use [2, 1] to move to the preceding or following page.
[3] Press [CANCEL/RESET, ¢] to delete,
You cannot delete programs that are currently recording.
or press [ENTER] to change.
The timer recording setting screen appears.
[4] If you pressed [ENTER] in step 3,
Use [3, 4, 2, 1] to change and press [ENTER].
[5] Press [RETURN].
For your reference
Programs that failed to record are not deleted from the list
immediately (indicated in gray), but are deleted from the list
automatically at 4 a.m. two days later.
During timer recording, you can change the end time as long as the
recording mode is not “FR”.
Timer recording for TV programs cannot be executed on both DVD
and VHS at the same time.
Make sure the timer recording start times do not overlap on both
DVD (l left) and VHS (l 53) timer-programming screens.
When the timer recording settings overlap:
When the start time of both timer recordings is the same, the timer
recording of DVD has priority.
When tuner channels are specified in timer recordings on both VHS
and DVD, only one timer recording can be started.
When the interval between the first timer recording and the second
timer recording on DVD is 1 minute or less as shown below, the
second timer recording on DVD has priority over the timer
recording on VHS even if its start time is later than the timer
recording on VHS.
Preparation
Press [DVD].
Check, change or delete programs
W
F
X
TIMER
RECORDING
Remaining Recording Time
4:00 LP
MODE CHECK
OFFONNo
CHANNEL
DATE
New Timer Program
12:57 PM7/13 TUE
A
B
Cautions for using timer recording on
DVD and VHS
1 minute
4 CH
10 CH
2 CH
VHS
DVD
DVD
PP-Sample.book 29 ページ 2004年3月8日 月曜日 午後6時3分
30
Advanced Operations
[RAM] [DVD-R]
Preparation
Release protection (disc l below, cartridge l 18). [RAM]
Press [DVD].
[1] While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “DISC SETTING” with [3, 4, 2, 1] and
press [ENTER].
[3] Use [3, 4] to select a desired item and press
[ENTER].
After this operation, follow the desired operation.
[RAM] [DVD-R]
Refer to “Entering text”. (l 32)
The disc name is displayed in the FUNCTIONS window.
Note
You cannot give DVD-R titles once they have been finalized.
[RAM]
This allows you to protect discs from accidental erasure.
This allows you to release disc protection.
[4] Select “Yes” with [2] and press [ENTER].
To protect To release protection
DISC SETTING
DVD
RETURN
FUNCTIONS
3, 4, 2, 1
ENTER
PLAY
PROG/CHECK
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
STATUSDISPLAY
SUB MENU
POWER
VOLUME
CH
INPUT SELECT
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
OUTPUT
To stop partway
Press [RETURN].
DVD
DVD-RAM
DIRECT NAVIGATOR
TIMER RECORDING
PLAY LIST
SETUP
FLEXIBLE RECORDING
DISC SETTING
Record
Dubbing
/ Edit
Set up
Play back
DISC PROTECTION OFF
CARTRIDGE PROTECTION OFF
e.g., DVD-RAM
Titles 7
DISC SETTING
Disc Name
Format disc
Used 0 : 58
Free 0 : 42 (SP)
Disc Protection
Off
Titles 7
DISC SETTING
Disc Name
Finalize
Used 0 : 58
Free 0 : 42 (SP)
Top Menu
Select First play
DVD-RAM DVD-R
e.g., DVD-RAM e.g., DVD-R
1 Disc Name
1 Disc Protection
DVD
DVD-RAM
DIRECT NAVIGATOR
Pla
y
back
DISC PROTECTI
123
CARTRIDGE PR
O
Titles 7
DISC SETTING
Disc Name
Format disc
Used 0 : 58
Free 0 : 42 (SP)
Disc Protection
DVD-RAM
Disc Protection
Set up Disc Protection.
Yes No
On
Titles 7
DISC SETTING
Disc Name
Format disc
Used 0 : 58
Free 0 : 42 (SP)
Disc Protection
Off
DVD-RAM
Disc Protection
Cancel Disc Protection.
Yes No
DVD
PP-Sample.book 30 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
31
[RAM]
Some DVD-RAM are unformatted. You must format these discs before using them in this unit.
Formatting also allows you to erase the entire contents of a disc.
[4] Select “Yes” with [2] and press [ENTER].
[5] Select “Start” with [2] and press [ENTER].
Formatting starts.
A message appears when formatting is finished.
[6] Press [ENTER].
Once the disc has been formatted, the contents cannot be restored. Check carefully before
proceeding. The contents on the disc are erased when you format it even if you have set title or
disc protection.
Note
Do not turn the unit off or disconnect the AC power supply cord while the message
“Formatting the disc” is on the TV. This can render the disc unusable.
(This can take up to max. 70 minutes (DVD-RAM). If it takes more than 2 minutes, you can cancel
formatting by pressing [RETURN]. The disc must be reformatted if you do this.)
All data on the disc is erased when it is formatted, including recordings made with this unit. Data written to the disc by a computer is also
erased.
The disc cannot be formatted if the write protect tab (l 18) is switched to “PROTECT”. Release the protection to continue.
The message “Unable to format” appears when trying to format discs this unit cannot use.
For your reference
DVD-R and CD-R/RW cannot be formatted.
[DVD-R]
Select whether to show the top menu after finalizing the disc. Do this before finalizing the disc.
[4] Use [3, 4] to select a desired item and press [ENTER].
Top Menu: The top menu appears first.
Title 1: The disc content is played without displaying the top menu.
[DVD-R]
You can play DVD-R on compatible DVD players by finalizing them on this unit, effectively making
them into DVD-Video that complies with DVD-Video standards.
The menu you create with this unit can also be used on the player.
[4] Select “Yes” with [2] and press [ENTER].
[5] Select “Start” with [2] and press [ENTER].
Finalizing starts.
A message appears when finalizing is finished.
[6] Press [ENTER].
Note
Do not turn the unit off or disconnect the AC power supply cord while the message
“Finalizing the Disc” is on the TV. This can render the disc unusable.
Finalizing takes up to about 15 minutes.
You can only finalize DVD-R that were recorded on this unit.
You cannot record on DVD-R that have been finalized.
After finalizing
-
The disc becomes play-only and you can no longer record or edit it.
-
DVD-R finalized on this unit may not be playable on other players due to the condition of the recording.
-
There is a pause of several seconds between titles.
-
Titles are divided into about 5-minute° chapters.
° This time varies greatly depending on the condition and mode of recording.
Visit Panasonic’s homepage for more information about DVDs.
For U.S.A.: http://www.panasonic.com/playDVD-R
For Canada: http://www.panasonic.ca
1 Format disc
1 Select First play
1 Finalize
Format disc
Formatting the disc will erase all contents.
This will take approximately 1 minute.
Are you sure you want to continue?
Yes No
Format disc
All contents of this disc will be
completely erased.
Do you want to continue?
Start Cancel
Select First play
Top Menu
Title 1
Finalize
This will take approximately
minutes.
Do you want to continue?
Yes No
Finalize
You will be unable to record on this disc
one it is finalized.
Are you sure you want to continue?
Start Cancel
DVD
PP-Sample.book 31 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
32
[RAM] [DVD-R]
You can give names to recorded titles, etc.
The maximum number of characters:
[RAM] Characters
Title 64
Title (timer recording) 44
Play list 64
Disc 64
[DVD-R] Characters
Title 44
Disc 40
If a name is long, parts of it may not be shown on some screens.
Preparation
Insert a recorded disc.
Release protection.
-
Disc (l 30), title (l 34), cartridge (l 18) [RAM]
Press [DVD].
[1] After the Enter Name screen appears
Use [3, 4, 2, 1] to select the character you
want to enter and press [ENTER].
You can enter the following characters.
(1) This window shows the text you have entered. (Name field)
(2) ERASE [;, PAUSE]
(3) SET (when you have finished entering text) [, STOP]
(4) SPACE
(5) The title displayed on the menu screen after finalizing the
DVD-R appears. [DVD-R] (l 34)
To enter other characters
Repeat step 1.
[2] Press [, STOP].
The title is entered and the screen disappears.
You can also finish entering the title by selecting “SET” with [3,
4, 2, 1] and pressing [ENTER].
Regarding entering characters
To erase characters
Press [;, PAUSE]. (You can also erase characters by selecting
“ERASE” with [3, 4, 2, 1] and pressing [ENTER].)
To enter a space
You may enter a space by pressing [¢] and then press
[ENTER].
Using the numeric buttons to enter characters
e.g., entering the letter “R”
[1] Press [7] to move to the 7th row.
[2] Press [7] twice to highlight “R”.
[3] Press [ENTER].
To correct a character
[1] Use [3, 4, 2, 1] to select the character you want to correct in
the name field.
[2] Press [;, PAUSE]. (You can also erase characters by using [3,
4, 2, 1] to select “ERASE” and pressing [ENTER].)
[3] Use [3, 4, 2, 1] to select the correct character and press
[ENTER].
Note
If you enter a long name, it is partially shown in the title list (l 33)
and play list screen (l 37).
To cancel partway
Press [RETURN].
Text is not saved.
Entering text
Refer to the following pages regarding display of the Enter Name
Screen.
Title (l 34).
Title (timer recording) (l 28).
Disc (l 30).
Play list (l 38).
DVD
RETURN
DIRECT NAVIGATOR
SUB MENU
3, 4, 2, 1
ENTER
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
POWER
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
VCR Plus+
OUTPUT
:, 9
;
Numeric
Buttons
_
Enter Name
SPACE
SET
0
––
ERASE
(1)
(2)
(3)
(4)
11
2
3
4
5
6
7
8
9
0
2345
ABC a
DEF d
GH I
NO
g
JKL j
M
m
67890
bcij
ef /l %
hi $&
klON@
n ]
_
o[
PQRSp
TUV t
WX Y Zw
qrs
()
uv
{}
-
xyz
^
!?
\
.
,
"
'
:;
|
DVD-R_
Enter Name
Display in DVD-R
TOP MENU
DVD-R
(5)
5
6
7
8
NO
JKL
M
PQR
S
TUV
7
7 7
DVD
PP-Sample.book 32 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
33
[RAM] [DVD-R]
The maximum number of items on a disc:
-
Titles: 99
-
Chapters: Approximately 1000 (Depends on disc contents.)
Note
Once erased or shortened, the title cannot be restored to its original
state. Make certain before proceeding.
You cannot edit during recording.
Preparation
Insert a disc that has been recorded on.
Press [DVD].
[1] Press [DIRECT NAVIGATOR].
[2] Use [3, 4, 2, 1] to select the title you want to
watch and press [ENTER].
You can also select titles by entering a 2-digit number with the
numeric buttons.
e.g.: “5”: [0] )[5]
“15”: [1] )[5]
If you enter a number larger than the total number of titles, the
last title is selected.
For your reference
The Direct Navigator works while stopped, playing or recording.
Preparation
Release protection (disc l 30, cartridge l 18). [RAM]
When the title is protected (l 34), you can only access
“Properties” and “Cancel Protection”. Release the protection to
access other items. [RAM]
Press [DVD].
[1] Press [DIRECT NAVIGATOR].
[2] Use [3, 4, 2, 1] to select a desired title.
“To show other pages”, l above
[3] Press [SUB MENU].
[4] Use [3, 4] to select a desired item
and press [ENTER].
[RAM] [DVD-R] (Multiple editing is possible.)
The title is irretrievably erased when you use this procedure and cannot be retrieved. Check the title
carefully before erasing to ensure it isn’t one you want to keep.
[5] Select “Erase” with [2] and press [ENTER].
For your reference
The disc’s available recording time may not increase after erasing short titles.
The available recording time on DVD-R does not increase when you erase titles.
[RAM] [DVD-R]
You can check the contents of a selected title.
Using the Direct Navigator
Direct Navigator screen icons
: Title protected
: Copy-protected so it was not recorded.
t: Unable to play
¥: Currently recording
Title/Chapter
Programs are recorded as a single title consisting of one chapter.
Title
Chapter
You can divide a title into multiple chapters. [RAM]
(l 23, “Create chapters”, l 35, “Divide Chapter”)
Title
Chapter Chapter Chapter Chapter
You can change the order of chapters and create a play list. [RAM]
Titles are divided into about 5-minute chapters after finalizing
(l 31). [DVD-R]
Start End
Selecting recorded titles to play
To show other pages
Press [3, 4, 2, 1] to select “Previous” or “Next” and press
[ENTER].
You can also press [:, SKIP] or [9, SKIP] to show other
pages.
To clear the title list
Press [RETURN].
- -
DIRECT NAVIGATOR Title View
Previous 02/02 Next
DVD-RAM
- -
- -- -- -
08
07
Select
Play
SUB MENU
10 10/25 Mon 8 10/25 Mon
Direct Navigator
Multiple editing
Select with [3, 4, 2, 1] and press [;, PAUSE]. (Repeat)
A check mark appears. Press [;, PAUSE] again to cancel.
To stop partway
Press [RETURN].
Properties
Edit
Chapter View
Erase
1 Erase
1 Properties
Erase
Erase Cancel
0 : 58(SP)
Corresponding play list chapters will be erased.
Time remaining after erase
No. 01
Date 13/ 7/2004 Tue
CH 12
Start 1:02 PM
Rec time 0:01
(
SP
)
Football
Properties
DVD
PP-Sample.book 33 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
34
Edit Sub menu displayed.
[5] Use [3, 4] to select
the desired item and
press [ENTER].
[RAM] [DVD-R]
Refer to “Entering text”. (l 32)
For your reference
The full name is shown in the “Properties” screen, but if you enter a
long name, only part of it is shown in the title list.
[RAM] (Multiple editing is possible.)
You can prevent accidental erasure of titles by write-protecting them.
[6] Select “Yes” with [2] and press [ENTER].
For your reference
Titles will be erased even if they are protected if you format the disc
with DISC SETTING (l 31).
[RAM] (Multiple editing is possible.)
[6] Select “Yes” with [2] and press [ENTER].
[RAM]
You can remove unnecessary parts of the recording such as
commercials.
[6] Press [ENTER]
at the start point
and end point of
the section you
want to erase.
(l 35, “For quicker
editing”)
[7] Select “Exit”
with [3, 4] and
press [ENTER].
[8] Select “Erase”
with [2] and
press [ENTER].
To erase another part of the same title
After storing the point in “Start” and “End”, select “Next” in step 6 and
perform step 8, then repeat steps 6–8.
For your reference
You may not be able to specify start and end points within
3 seconds of each other.
You cannot specify start and end points if the picture recorded is
stilled.
The unit pauses when the title reaches its end during this
procedure.
The disc’s available recording time may not increase after erasing
short parts of titles.
[RAM] [DVD-R]
You can change the image to be shown as a thumbnail picture in the Title View.
[6] Press [1, PLAY] to play.
[7] Press [ENTER] at the point you want to display.
(l 35, “For quicker editing”)
To change to another point in the same title:
- Select “Change” with [3, 4] and press [1, PLAY], and then repeat steps 7–8.
[8] Select “Exit” with [3, 4] and press [ENTER].
The displayed scene is changed at this point.
For your reference
You cannot select the top and end of the title.
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
STATUSDISPLAY
SUB MENU
VCR Plus+
DVD
RETURN
DIRECT NAVIGATOR
SUB MENU
3, 4, 2, 1
ENTER
:, 9
1
POWER
VOLUME
CH
INPUT SELECT
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
OUTPUT
Preparation
Release protection (disc l 30, cartridge l 18). [RAM]
Press [DVD].
[1] Press [DIRECT NAVIGATOR].
[2] Use [3, 4, 2, 1] to select a desired title.
“To show other pages”, l 33
“Multiple editing”, l 33
[3] Press [SUB MENU].
[4] Use [3, 4] to select a desired
item and press [ENTER].
To stop partway
Press [RETURN].
1 Edit
Properties
Edit
Chapter View
Erase
Set up Protection
Cancel Protection
Shorten
Change Thumbnail
Divide Title
Enter Name
e.g.: DVD-RAM
11 Enter Name
11 Set up Protection
11 Cancel Protection
DIRECT NAVIGATOR Title View
DVD-RAM
----
08
07
10 10/25 Mon 8 10/
2
Set up Protection
Set title protection.
Yes No
The
p
adlock mark a
pp
ears.
DIRECT NAVIGATOR Title View
DVD-RAM
----
08
07
10 10/25 Mon 8 10/
2
Cancel Protection
Cancel title protection.
Yes No
The padlock mark disappears.
11 Shorten
DIRECT NAVIGATOR Shorten
DVD-RAM
Start
Next
Exit
0:43.21
PLAY
08
End
- -:- -.- - - -:- -.- -
Start End
Shorten
Erase Cancel
0 : 58(SP)
Corresponding play list chapters will be erased.
Time remaining after erase
11 Change Thumbnail
DIRECT NAVIGATOR Change Thumbnail
DVD-RAM
Change
Exit
0:00.00
0:00.00
Change
08
;
DVD
PP-Sample.book 34 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
35
[RAM]
You can divide a selected title into two. You must make sure when
dividing a title because it cannot be recovered after the procedure.
[6] Press [ENTER]
at the point you
want to divide
the title.
(l below,
“For quicker editing”)
To change the point
to divide:
- Select “Divide” with
[3, 4] and press
[1, PLAY], and
then repeat steps 6–8.
[7] Select “Exit” with [3, 4] and press [ENTER].
[8] Select “Divide”
with [2] and
press [ENTER].
The title is divided at
the point.
To check the
division point
By selecting “Preview” in step 6 and pressing [ENTER], play will
begin from 10 seconds prior to the division point to 10 seconds after
the division point. You can make sure that the division point is
appropriate.
For your reference
The divided titles retain the name of the original title. They also
retain the CPRM property (l 18) of the original.
Use search and slow-motion to find the points.
It is not possible to carry out “Divide” in the following cases:
-
When the resulting part(s) are extremely short.
-
When the total number of titles is more than 99.
[5] Use [3, 4, 2, 1] to select the desired chapter.
To start play l Press [ENTER].
To edit l Follow the steps below.
[6] Press [SUB MENU]
[7] Use [3, 4] to select a desired item and press [ENTER].
[RAM] (Multiple editing is possible.)
[8] Select “Erase” with [2] and press [ENTER].
[RAM]
[8] Press [ENTER]
at the point you
want to divide.
(l below, “For
quicker editing”)
Repeat this step to
divide at other
points.
[9] Select “Exit” with [4] and press [ENTER].
Note
A little portion of the recording directly preceding the division point
may be lost.
For your reference
The divided titles retain the name of the original title. They also
retain the CPRM property (l 18) of the original.
It is not possible to carry out “Divide”, when the resulting part(s) are
extremely short.
[RAM]
[8] Select “Combine” with [2] and press [ENTER].
The selected chapter and next chapter are combined.
[RAM] [DVD-R]
Go back to Title View.
11 Divide Title
DIRECT NAVIGATOR Divide Title
DVD-RAM
Preview
Divide
Exit
0:00.05
0:00.05
Divide
08
;
Divide Title
Divide Cancel
Once divided, this title cannot be
recombined.
1 Chapter View
08 4 10/25 Mon
DIRECT NAVIGATOR Chapter View
DVD-RAM
001
Back 02/02 Next
Divide Chapter
Combine Chapters
Title View
Erase Chapter
Divide Chapter
Combine Chapters
Title View
Erase Chapter
e.g.: DVD-RAM
11 Erase Chapter
11 Divide Chapter
Erase Chapter
Erase Cancel
Corresponding play list chapters will be erased.
DIRECT NAVIGATOR Divide Chapter
DVD-RAM
Divide
Exit
0:43.21
PLAY
08
11 Combine Chapters
11 Title View
For quicker editing
Use search (l 22), Time Slip (l 23) or slow-motion (l 22) to
find the desired point.
Press [:, SKIP] or [9, SKIP] to skip to the end of a title.
Combine Chapters
Combine Cancel
Combine chapters.
Selected Chapter Following Chapter
001 002
- -
DIRECT NAVIGATOR Title View
Previous 02/02 Next
DVD-RAM
- -
- -- -- -
08
07
Select
Play
SUB MENU
10 10/25 Mon 8 10/25 Mon
DVD
PP-Sample.book 35 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
36
[RAM]
The maximum number of items on a disc:
-
Titles: 99
-
Chapters: Approximately 1000 (Depends on disc contents.)
Preparation
Release protection (disc l 30, cartridge l 18).
Press [DVD].
[1] While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “PLAY LIST” with [3, 4, 2, 1] and
press [ENTER].
[3] Select “Create” with [3, 4, 2, 1] and press
[ENTER].
[4] Use [2, 1] to select the source title and press
[4].
[5] Use [2, 1] to select the chapter you want to
add to a play list and press [ENTER].
Press [3] to cancel.
You can also create a new chapter from the source title.
Press [SUB MENU] to select “Divide Chapter” and press
[ENTER] (l 35, “Divide Chapter”).
[6] Use [2, 1] to select the position to insert the
chapter and press [ENTER].
Repeat steps 5–6 to add other chapters.
Press [3] to select other source titles.
[7] Press [RETURN].
To stop partway through
Press [RETURN].
To clear the play list screen
Press [RETURN].
For your reference
You may not be able to specify start and end points if the material
is still pictures recorded on other equipment.
Using play list
You can create a play list by gathering your favourite chapters
(l 33) from your recordings. You can also edit the created play
list.
Editing play lists doesn’t modify the recorded data.
Play lists are not recorded separately so this doesn’t use much
capacity.
Creating play lists
DVD
RETURN
FUNCTIONS
SUB MENU
DVD ERASE
3, 4, 2, 1
ENTER
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
POWER
TIME SLIP
CHAPTER
JET REW
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
DVD ERASE
VCR Plus+
OUTPUT
:, 9
;
Numeric
Buttons
Title Title
Chapter Chapter Chapter Chapter Chapter
Chapter ChapterPlay list
DVD
DVD-RAM
DIRECT NAVIGATOR
TIMER RECORDING
PLAY LIST
SETUP
FLEXIBLE RECORDING
DISC SETTING
Record
Dubbing
/ Edit
Set up
Play back
DISC PROTECTION OFF
CARTRIDGE PROTECTION OFF
When you want to select all chapters in the title:
Use [2, 1] to select the source title and press [ENTER], then
skip to step 6.
Repeat 4-6 to add other titles or chapters.
- -
PLAY LIST Play List View
Previous 01/01 Next
DVD-RAM
- -
- -- -- -
- -- -
Create
01 4 10/25 Mon
Source Title
Source Chapter
01/01
001/001
003
0201
001 002
PLAY LIST Create
DVD-RAM
Source Chapter
Insert position
001/001
001/001
003001 002
Chapters in PLAY LIST
Press RETURN to exit.
001/001
Chapters in PLAY LIST
SUB MENU
Press RETURN to exit.
001/001
001
DVD
PP-Sample.book 36 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
37
[RAM]
Preparation
Create play list first (l 36).
Press [DVD].
[1] While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “PLAY LIST” with [3, 4, 2, 1] and
press [ENTER].
[3] Press [3, 4, 2, 1] to select the play list and
press [ENTER].
You can also select a playlist from the chapter view by entering
a 2-digit number with the numeric buttons.
e.g.: “5”: [0] )[5]
“15”: [1] )[5]
If you enter a number larger than the total number of play lists,
the last play list is selected.
To stop play list play
Press [, STOP]. (The play list appears.)
To erase a play list during play
[1] Press [DVD ERASE].
A confirmation message will be displayed.
[2] Use [2] to select “Erase” and press [ENTER].
[RAM]
Preparation
Create play lists first (l 36).
Release protection (disc l 30, cartridge l 18).
Press [DVD].
For your reference
You can use fast-forward, rewind, pause, and slow-motion while
playing chapters just as you can during normal play.
[1] While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “PLAY LIST” with [3, 4, 2, 1] and
press [ENTER].
Chapters are not displayed if you have not yet created a play
list with the disc.
[3] Press [3, 4, 2, 1] to select the play list.
“To show other pages”, l above
[4] Press [SUB MENU], then use [3, 4]
to select the operation and press
[ENTER].
(Multiple editing is possible.)
[5] Select “Erase” with [2] and press [ENTER].
The play list is
erased.
Once a play list has
been erased, it is
irretrievable. Check
carefully before
proceeding.
Even if you erase the play list, the original title is not erased.
Play list information (e.g., time and date) is shown.
Playing play lists
To show other pages
Press [3, 4, 2, 1] to select “Previous” or “Next” and press
[ENTER].
You can also press [:, SKIP] or [9, SKIP] to show other
pages.
Using play list to edit play lists/chapters
Multiple editing
Select with [3, 4, 2, 1] and press [;, PAUSE]. (Repeat)
A check mark appears. Press [;, PAUSE] again to cancel.
To clear the play list screen
Press [RETURN].
To stop partway
Press [RETURN].
Properties
Edit
Chapter View
Erase
1 Erase
Erase
Erase Cancel
Erase Play List?
1 Properties
No. 03
Chapters 004
Date 13/ 7/2004 Tue
Time 0:05.51
Dinosaur
Properties
DVD
PP-Sample.book 37 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
38
Edit Sub menu displayed.
[5] Use [3, 4] to select the desired item and press [ENTER].
Refer to “Creating play lists”. (l 36)
(Multiple editing is possible.)
[6] Select “Copy” with [2] and press [ENTER].
Refer to “Entering text”. (l 32)
For your reference
The full name is shown in the “Properties” screen, but if you enter a
long name, only part of it is shown in the play list screen.
You can change the image to be shown as a thumbnail picture in the
Play List View.
[6] Press [1, PLAY]
to play.
[7] Press [ENTER]
at the point you
want to display.
(l 35, “For quicker
editing”)
To change to
another point in the
same title:
- Select “Change” with [3, 4] and press [1, PLAY], and then
repeat steps 7–8.
[8] Select “Exit” with [3, 4] and press [ENTER].
The displayed scene is changed at this point.
For your reference
You cannot select the top and end of the title.
DVD
RETURN
FUNCTIONS
SUB MENU
DVD ERASE
3, 4, 2, 1
ENTER
1
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
POWER
TIME SLIP
CHAPTER
JET REW
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
DVD ERASE
VCR Plus+
OUTPUT
:, 9
Numeric
Buttons
[RAM]
Preparation
Create play lists first (l 36).
Release protection (disc l 30, cartridge l 18).
Press [DVD].
For your reference
You can use fast-forward, rewind, pause, and slow-motion while
playing chapters just as you can during normal play.
[1] Press [FUNCTIONS]. (l 47)
[2] Select “PLAY LIST” with [3, 4,
2, 1] and press [ENTER].
Chapters are not displayed if you have not
yet created a play list with the disc.
[3] Press [3, 4, 2, 1] to select the
play list.
“To show other pages”, l 37
“Multiple editing”, l 37
[4] Press [SUB MENU], then [3, 4] to select the
operation and press [ENTER].
To clear the play list screen
Press [RETURN].
To stop partway
Press [RETURN].
Properties
Edit
Chapter View
Erase
1 Edit
Copy
Enter Name
Change Thumbnail
Create
11 Create
11 Copy
11 Enter Name
Copy
Copy Cancel
Copy this Play List?
11 Change Thumbnail
PLAY LIST Change Thumbnail
DVD-RAM
Change
Exit
0:00.00
0:00.00
Change
08
;
DVD
PP-Sample.book 38 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
39
[5] Use [3, 4, 2, 1] to select a desired chapter.
You can also select a chapter from the chapter view by
entering a 3-digit number with the numeric buttons.
e.g.: “5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
If you enter a number larger than the total number of chapters,
the last chapter is selected.
To edit l Follow the steps below.
Editing chapters in a play list does not modify the source titles
and source chapters.
[6] Press [SUB MENU]
[7] Use [3, 4] to select a desired item and press
[ENTER].
Refer to “Creating play lists”, step 4–7. (l 36)
[8] Use [3, 4, 2, 1] to select the position to insert
the chapter and press [ENTER].
The chapter is
moved and inserted
before the
highlighted chapter.
[8] Press [ENTER]
at the point you
want to divide.
(l 35, “For quicker
editing”)
Repeat this step to
divide at other points.
[9] Select “Exit”
with [4] and
press [ENTER].
Note
A little portion of the recording directly preceding the division point
may be lost.
For your reference
The divided titles retain the name of the original title. They also
retain the CPRM property (l 18) of the original.
It is not possible to carry out “Divide”, when the resulting part(s) are
extremely short.
[8] Select “Combine” with [2] and press [ENTER].
The selected chapter and next chapter are combined.
(Multiple editing is possible.)
[8] Select “Erase” with [2] and press [ENTER].
Even if you erase the chapter, the original title is not erased.
Go back to Play List View.
1 Chapter View
08 10/25 Mon 0:01
PLAY LIST Chapter View
DVD-RAM
001
Back 02/02 Next
Move Chapter
Divide Chapter
Add Chapter
Combine Chapters
Erase Chapter
Play List View
sss
sss
sss sss
sss sss
sss sss
Move Chapter
Divide Chapte
Add Chapter
Combine Chapters
Erase Chapter
Play List View
To show other pages
Press [3, 4, 2, 1] to select “Previous” or “Next” and press
[ENTER].
You can also press [:, SKIP] or [9, SKIP] to show other
pages.
To play a chapter
Press [ENTER] after step 5.
To stop chapter play
Press [, STOP]. (The chapter view appears.)
To erase a chapter during play
[1] Press [DVD ERASE].
A confirmation message will be displayed.
[2] Use [2] to select “Erase” and press [ENTER].
11 Add Chapter
11 Move Chapter
11 Divide Chapter
08 10/25 Mon 0:01
PLAY LIST Move Chapter
DVD-RAM
001
Previous 02/02 Next
002 003
sss
sss sss sss
sss sss sss
sss
sss
PLAY LIST Divide Chapter
DVD-RAM
Divide
Exit
0:43.21
PLAY
08
11 Combine Chapters
11 Erase Chapter
11 Play List View
Combine Chapters
Combine Cancel
Combine chapters.
Selected Chapter Following Chapter
001 002
Erase Chapter
Erase Cancel
Erase play list chapter?
- -
PLAY LIST Play List View
Previous 02/02 Next
DVD-RAM
- -
- -- -- -
08
07
Select
Play
SUB MENU
10/25 Mon 0:30 10/25 Mon 0:01
Create
DVD
PP-Sample.book 39 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
40
[RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]
Remote control only
DISPLAY menus contain information about the disc or unit. These
menus allow you to perform the following operations:
You can change the subtitles and the angle when using
DVD-Video.
You can enjoy repeat play.
You can change picture and sound settings when playing back a
DVD.
Preparation
Press [DVD].
[1] Press [DISPLAY].
[2] Select the menu with [3, 4] and press [1].
[3] Select the item with [3, 4] and press [1].
[4] Select the setting with [3, 4].
Some options require different operations. Follow the on-
screen instructions and the instructions described later.
When you are finished
Press [DISPLAY].
For your reference
The screens depend on the disc contents.
Depending on the condition of the unit (playing, stopped, etc.) and
the type of software you are playing, there are some items that you
cannot select or change.
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD]
Sound track
Sound track language [DVD-A] [DVD-V]
(See [A] Sound track/Subtitle language)
Change the number to select a sound track.
Audio attribute [RAM] [DVD-R] [DVD-A] [DVD-V]
(See [B] Audio attributes)
Karaoke vocals, on and off (Karaoke [DVD-V] only)
Solo: ON()OFF
Duet: OFF()V1iV2()V1()V2()OFF...
Subtitle
Subtitle language [DVD-A] [DVD-V]
(See [A] Sound track/Subtitle language)
Change the number to select a subtitle language.
Subtitles ON/OFF [RAM] [DVD-R] [DVD-A] [DVD-V]
Turn the subtitles ON or OFF.
Angle
[DVD-A] [DVD-V]
Change the number to select an angle.
STILL-P
[DVD-A]
Page
Still picture number
When “Return” is displayed, select it and press [ENTER] to
return to the default page.
When “RANDOM” is displayed, select it and press [ENTER].
The picture changes randomly each time you press
[ENTER].
Slide show (Display only)
Audio channel
[RAM] [VCD]
Select the audio channel. (l 23)
PBC
[VCD] (l 63)
Playback control on/off
Indicates whether menu play (playback control) is on or off.
[A] Sound track/Subtitle language
[B] Audio attributes
LPCM/PPCM/
Î Digital/DTS/MPEG: Signal type
k (kHz): Sampling frequency
b (bit): Number of bits
ch (channel): Number of channels
For your reference
When playing back recordings of bilingual broadcasts, “1_1 ch” will
be displayed.
You can only select subtitles, sound tracks, and angles if they are
recorded on the disc.
Some discs allow changes to sound tracks, subtitles, and angles
only by using the disc’s menus.
If the subtitles overlap closed captions recorded on discs, turn the
subtitles off.
Using DISPLAY menus
POWER
VOLUME
CH
INPUT SELECT
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
OUTPUT
DVD
DISPLAY
3, 4, 1
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
TIME SLIP
CHAPTER
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
STATUSDISPLAY
SUB MENU
DVD ERASE
Common procedures
Disc
Video
Audio
Play
Sound track
Subtitle
Audio channel
OFF
1
Î Digital 2/0ch
L R
ItemMenu Setting
1 Disc menu
Disc
Video
Audio
Play
Sound track
Subtitle
Audio channel
1
OFF
L R
Î Digital 2/0ch
ENG:
FRA:
DEU:
ITA:
ESP:
NLD:
English
French
German
Italian
Spanish
Dutch
SVE:
NOR:
DAN:
POR:
RUS:
JPN:
Swedish
Norwegian
Danish
Portuguese
Russian
Japanese
CHI:
KOR:
MAL:
VIE:
THA:
¢:
Chinese
Korean
Malay
Vietnamese
Thai
Others
DVD
PP-Sample.book 40 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
41
[RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]
Repeat play
This function works only when the elapsed play time is displayed.
[RAM] [DVD-R] [DVD-V]
Title,.Chapter,.OFF
^--------------------------J
[CD] [VCD]
Track,.All,.OFF
^-------------------J
[DVD-A] [MP3]
Track,.Group,.OFF
^--------------------------J
While playing a play list
[RAM]
PL (play list),.OFF
^---------------------------J
Note
Repeat play may not work as desired with some discs.
You cannot use repeat play for an entire DVD-Audio, DVD-Video,
MP3 discs or all the play lists on a DVD-RAM.
While playing back, you can set repeat play. When stopped, the
repeat play operation is cancelled.
[DUBBING] or [DVD ERASE] does not work while in repeat play
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD]
Picture
To select the picture mode during play
Normal: Default setting
Soft: Soft picture with fewer video artifacts
Fine: Details are sharper
Cinema: Mellow movies, enhances detail in dark scenes.
MPEG-DNR
Reduces noise and picture degradation.
You can turn the recommended settings for DNR on and off.
ON()OFF
°
Progressive
(l 63)
Select “ON” to enable progressive output.
Select “OFF” if the picture is stretched horizontally.
When progressive output is on, closed captions cannot be
displayed.
ON()OFF
°
Transfer
(When “Progressive” is set to “ON”)
Select the method of conversion for progressive output to suit
the type of material being played (l 63, Film and video).
Auto1 (normal):
Detects 24 frame-per-second film content and
appropriately converts it.
Auto2: Compatible with 30 frame-per-second film content in
addition to 24 frame-per-second film content.
Video: Select when using Auto1 and Auto2, and the video
content is distorted.
° Only when you have selected “480P” in “TV Type” (l 17).
[RAM] [DVD-R] [DVD-A] [DVD-V]
V.S.S.
[RAM] [DVD-R] [DVD-V]
(Only for Dolby Digital with 2 or more channels)
Enjoy a surround-like effect if you are using 2 front speakers
only. The effect is broadened and sound seems to come from
virtual speakers on either side if the disc has surround signals
recorded on it.
Natural()Emphasis()OFF()Natural...
Note
V.S.S. will not work, or will have less effect, with some discs, even
if you select “Natural” or “Emphasis”.
Turn V.S.S. off if it causes distortion.
V.S.S. does not work for SAP recordings.
Dialog Enhancer
[DVD-A] [DVD-V]
(Dolby Digital, 3-channel or over only, including a center channel)
The volume of the center channel is raised to make dialog easier
to hear.
ON()OFF
1 Play menu
Disc
Video
Audio
Play
Repeat Play
OFF
1 Video menu
Disc
Video
Audio
Play
Picture
MPEG-DNR
ON
Progressive Transfer
Auto 1ON
Normal
1 Audio menu
Disc
Video
Audio
Play
V.S .S .
Dialog Enhancer
OFF
OFF
DVD
PP-Sample.book 41 ページ 2004年3月8日 月曜日 午後6時3分
42
Various Settings
Preparation
Press [DVD].
Use the following procedure to change the settings if necessary.
[1] While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “SETUP” with [3, 4, 2, 1] and press
[ENTER].
[3] Use [3, 4] to select the menu’s tab and press
[2, 1].
[4] Use [3, 4] to select the item to be changed and
press [ENTER].
[5] Use [3, 4] to select an option and press
[ENTER].
Some options require different operations. Follow the displayed
instructions.
To return to the previous screen
Press [RETURN]. Even if you have changed an option, the change is
not activated until you press [ENTER].
To exit the screen
Press [RETURN] several times.
For your reference
The settings remain intact even if you switch the unit to standby.
You can limit play of DVDs unsuitable for some audiences (children,
for example). Play and changes to the settings are not possible
unless you enter a password. (l 43)
Preparation
Press [DVD].
When setting ratings
The password screen is shown when you select levels 0 to 7.
[1] Input a 4-digit password with the numeric buttons.
If you enter a wrong number, press [2] to erase it before you
press [ENTER].
Do not forget your password.
[2] Press [ENTER].
[3] Press [ENTER].
The password is entered and the unit is locked.
Now, when you insert a DVD-Video that exceeds the ratings limit you
set, a message appears on the TV.
Follow the on-screen instructions.
When changing ratings
The password screen is shown when you select “Ratings”.
[1] Input a 4-digit password with the numeric buttons and press
[ENTER].
Unlock Recorder: To unlock the unit and return the rating to 8
Change Password: To change your password
Change Level: To change the rating level
Temporary Unlock: To temporarily unlock the unit (the unit locks
again if you switch it to standby or open the
disc tray)
[2] Select the item with [3, 4] and press [ENTER].
Actual screens depend on the operation. Follow the on-screen
instructions.
Changing the unit’s settings
Common procedures
DVD
RETURN
FUNCTIONS
3, 4, 2, 1
ENTER
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
POWER
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
VCR Plus+
OUTPUT
Numeric
Buttons
Off Timer
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
Remote Control Code
DVD/VHS Output
6 hr
Automatic
Set Code 1
Time Zone Adjust
Re-initialize Settings
0
Auto Clock Setting
Manual Clock Setting
(1) (2) (3)
SETUP
(1) Menus
(2) Items
(3) Options
Entering a password (Ratings)
DVD
PP-Sample.book 42 ページ 2004年3月8日 月曜日 午後6時3分
Various Settings
43
This description shows the initial settings for this unit. For
details on menu operation (l 42).
Underlined items are the factory presets.
Channel
Antenna System
(l 14)
[TV] [CATV
]
Auto Channel Setting (l 14)
Preset Channel Captions (l 16)
Manual Channel Captions (l 16)
VCR Plus+ CH Setting (l 15)
Set Up
Off Timer
Select how long the unit remains on when it is not being used.
[2 hr] [6 hr
] [Off]
Remote Control Code (l 17)
[Set Code 1
] [Set Code 2] [Set Code 3]
DVD / VHS Output (l 12)
Select how to switch the output from the DVD/VHS COMMON output
terminal on the back of this unit.
[Automatic
] [Manual]
Auto Clock Setting (l 46)
Manual Clock Setting (l 46)
Time Zone Adjust (l 46)
This corrects the time set in Auto Clock Setting.
The status is not displayed on the Set Up menu when the Auto Clock
Setting is not set.
[j1] [0
][i1]
Re-initialize Settings
This returns all values in the SETUP menus, except for the clock,
channel settings, ratings level, and on-screen language, to the
default settings.
[Yes] [No
]
Disc
Languages
Choose the language for audio, subtitle and disc menus. [DVD-V]
Press [ENTER] to display the menu.
Some discs are designed to start in a certain language despite any
changes made here.
If a language which is not recorded is selected, or if languages are
already fixed on the disc, the language set as the default on the
disc will be played instead.
Audio Language
[English
] [French] [Spanish] [Original] [Other ¢¢¢¢]
Subtitle Language
[Automatic
] [English] [French] [Spanish] [Other ¢¢¢¢]
Menu Language
[English
] [French] [Spanish] [Other ¢¢¢¢]
Original
The original language of each disc will be selected.
Other ¢¢¢¢
This is the language code setting.
Input a code number with the numeric buttons. (l 45,
“Language code list”.)
Automatic
If the language selected for “Audio Language” is not available,
subtitles of that language will automatically appear if available on
that disc.
Ratings (l 42)
Set a ratings level to limit DVD-Video play.
Setting ratings (When level 8 is selected)
[8 No Limit]
: All DVD-Video can be played.
[1] to [7]: Prohibits play of DVD-Video with corresponding
ratings recorded on them.
[0 Lock All]: Prohibits play of all DVD-Video.
Changing ratings (When level 0–7 is selected)
[Unlock Recorder] [Change Password]
[Change Level] [Temporary Unlock]
Recording Time in EP Mode
Select the maximum number of hours for recording in EP mode
(l 27, “Recording modes and approximate recording times”).
[EP (6H)] [EP (8H)
]
Play DVD-Audio in Video Mode
Select “Video (On)” to play DVD-Video content on DVD-Audio.
[Video (On)] [Audio (Off)
]
Summary of settings
Automatic Select this when you want to switch the output
automatically according to the operation or action of
this unit.
You can also switch the output by pressing [DVD/
VHS OUTPUT].
Manual Select this when you want to switch the output
between DVD and VHS manually.
The output is switched alternately by pressing [DVD/
VHS OUTPUT].
EP (6H) You can record for 6 hours on an unused 4.7 GB disc.
EP (8H) You can record for 8 hours on an unused 4.7 GB disc.
Video (On) The setting returns to “Audio (Off)” when you change
the disc or turn the unit off.
DVD
PP-Sample.book 43 ページ 2004年3月8日 月曜日 午後6時3分
Various Settings
44
Underlined items are the factory presets.
Video
3-D Y/C Separation
[On] [Off]
Hybrid VBR Resolution (l 63, “VBR”) [RAM]
[Automatic] [Fixed
]
Still Mode
Select the type of picture shown when you pause play.
(l 63, “Frame and field”)
[Automatic
] [Field] [Frame]
Line-in NR
Reduces video tape noise while transferring (dubbing).
When noise reduction is on, “3-D Y/C Separation” (l above) does
not work regardless of the setting.
[Automatic
] [On] [Off]
Black Level Control
Select normal, lighter or darker for adjusting the black level control to
the desired setting for picture enhancement.
Input Level
Adjusts the black level of the input signal.
[Lighter] [Darker
]
Output Level (Composite/S Video)
Adjusts the black level of the output signal from the VIDEO OUT
and S-VIDEO OUT terminal.
[Lighter
][Darker]
Output Level (Component)
Adjusts the black level of the output signal from the COMPONENT
VIDEO OUT (Y/P
B/PR) terminals.
[Lighter] [Normal
][Darker]
Audio
Search Audio & PLAY t1.3
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] (l 21)
Choose whether to operate the Quick View (Play k1.3) or not and
whether to have sound during search.
[On
] [Off]
[DVD-A]
You may hear sound regardless of this setting with some discs.
D. Range Compression
[DVD-V] (Dolby Digital only)
Change the dynamic range for late night viewing.
[On] [Off
]
Select MTS
Select whether to record the main or secondary audio type (SAP)
when recording or transferring (dubbing) to DVD-R. (You cannot
change secondary audio when recording audio to DVD-R from an
external source.)
When recording/transferring (dubbing) to DVD-R
[Main
] [SAP]
Digital Audio Output
Change the settings when you have connected equipment through
this unit’s DIGITAL AUDIO OUT terminal (l 12).
Press [ENTER] to display the menu.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or
88.2 kHz.
Signals are converted to 48 kHz or 44.1 kHz despite the above
settings if the signals have a sampling frequency of over 96 kHz
or 88.2 kHz, or the disc has copy protection.
[On] [Off
]
Dolby Digital
Choose whether to output Dolby Digital bitstream signals for
decoding on other equipment or to convert them to PCM signals
for 2-channel output.
[Bitstream
][PCM]
DTS
Choose whether to output DTS bitstream signals for decoding on
other equipment or to not.
[Bitstream] [PCM
]
° Set “Dolby Digital” to “PCM” and “DTS” to “PCM” if the other
equipment doesn’t have decoders. Incorrect settings can cause
noise to be output which can be harmful to your ears and
speakers, and audio will not be recorded properly to digital
recording equipment.
On Reduces noise by separating the luminance (Y) and
color (C) signals when recording.
Off Reduces the ghosting that occurs when recording fast
moving images.
Automatic The resolution is automated to provide efficient
recording with less block-shaped noise.
Fixed The resolution is fixed to ensure there is no loss of
source picture resolution while recording.
Field Select if jittering occurs when “Automatic” is selected.
Frame Select if small text or fine patterns cannot be seen
clearly when “Automatic” is selected.
Automatic Noise reduction only works on picture input from a
video tape.
On Noise reduction works for any video input.
Off Noise reduction is off. Select when you want to record
input as is.
On Signals are converted to 48 kHz or 44.1 kHz. (Choose
when the connected equipment cannot process
signals with sampling frequency of 96 kHz or
88.2 kHz.)
Off Signals are output as 96 kHz or 88.2 kHz. (Choose
when the connected equipment can process signals
with sampling frequency of 96 kHz or 88.2 kHz.)
Bitstream When you have connected a unit with a built-in Dolby
Digital decoder.
PCM When you have connected a unit that doesn’t have a
built-in Dolby Digital decoder.°
Bitstream When you have connected a unit with a built-in DTS
decoder.
PCM When you have connected a unit that doesn’t have a
built-in DTS decoder.°
DVD
PP-Sample.book 44 ページ 2004年3月8日 月曜日 午後6時3分
Various Settings
45
Underlined items are the factory presets.
ªDisplay
Status Messages
Choose whether to show status messages automatically or not.
[Automatic
] [Off]
On-screen Language
Choose the language for these menus and the on-screen messages.
[English
] [Español] [Français]
Blue Background
Select whether to show the blue background, normally shown when
TV reception is poor.
[On
] [Off]
Front Display
Changes the brightness of the unit’s display.
[Bright
][Dim][Automatic]
TV Screen
TV Type
(l 17)
Choose the setting to suit your TV and preference.
[Aspect 4:3 & 480I
] [Aspect 4:3 & 480P]
[Aspect 16:9 & 480I] [Aspect 16:9 & 480P]
4:3 TV Settings for DVD-Video
You can select how to display the image on the TV when you watch
16:9 images (DVD-Video) on a 4:3 standard aspect TV.
[Pan & Scan
] [Letterbox]
4:3 TV Settings for DVD-RAM
You can select how to display the image on the TV when you watch
16:9 images (DVD-RAM) on a 4:3 standard aspect TV.
[4:3
] [Pan & Scan] [Letterbox]
Automatic The display turns dark during play, and reappears
momentarily if a button is pressed. When the unit is
turned off all displays disappear. While using this
mode the standby power consumption can be
reduced.
Pan & Scan Video recorded for a widescreen is played with
the sides cut off if Pan & Scan was specified by
the producer of the disc. If 16:9 software
prohibits Pan & Scan, the image will appear in
the letterbox style (with black bands above and
below the picture) despite the setting here.
Letterbox Video recorded for a widescreen is played in
the letterbox style.
4:3 Titles played as recorded.
Pan & Scan Video recorded for a widescreen is played with the
sides cut off if the Pan & Scan format is specified at
the time of recording.
Letterbox Video recorded for a widescreen is played in the
letterbox style.
Language code list
Abkhazian: 6566
Afar: 6565
Afrikaans: 6570
Albanian: 8381
Ameharic: 6577
Arabic: 6582
Armenian: 7289
Assamese: 6583
Aymara: 6588
Azerbaijani: 6590
Bashkir: 6665
Basque: 6985
Bengali, Bangla: 6678
Bhutani: 6890
Bihari: 6672
Breton: 6682
Bulgarian: 6671
Burmese: 7789
Byelorussian: 6669
Cambodian: 7577
Catalan: 6765
Chinese: 9072
Corsican: 6779
Croatian: 7282
Czech: 6783
Danish: 6865
Dutch: 7876
English: 6978
Esperanto: 6979
Estonian: 6984
Faroese: 7079
Fiji: 7074
Finnish: 7073
French: 7082
Frisian: 7089
Galician: 7176
Georgian: 7565
German: 6869
Greek: 6976
Greenlandic: 7576
Guarani: 7178
Gujarati: 7185
Hausa: 7265
Hebrew: 7387
Hindi: 7273
Hungarian: 7285
Icelandic: 7383
Indonesian: 7378
Interlingua: 7365
Irish: 7165
Italian: 7384
Japanese: 7465
Javanese: 7487
Kannada: 7578
Kashmiri: 7583
Kazakh: 7575
Kirghiz: 7589
Korean: 7579
Kurdish: 7585
Laotian: 7679
Latin: 7665
Latvian, Lettish: 7686
Lingala: 7678
Lithuanian: 7684
Macedonian: 7775
Malagasy: 7771
Malay: 7783
Malayalam: 7776
Maltese: 7784
Maori: 7773
Marathi: 7782
Moldavian: 7779
Mongolian: 7778
Nauru: 7865
Nepali: 7869
Norwegian: 7879
Oriya: 7982
Pashto, Pushto: 8083
Persian: 7065
Polish: 8076
Portuguese: 8084
Punjabi: 8065
Quechua: 8185
Rhaeto-Romance: 8277
Romanian: 8279
Russian: 8285
Samoan: 8377
Sanskrit: 8365
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian: 8372
Shona: 8378
Sindhi: 8368
Singhalese: 8373
Slovak: 8375
Slovenian: 8376
Somali: 8379
Spanish: 6983
Sundanese: 8385
Swahili: 8387
Swedish: 8386
Tagalog: 8476
Tajik: 8471
Tamil: 8465
Tatar: 8484
Telugu: 8469
Thai: 8472
Tibetan: 6679
Tigrinya: 8473
Tonga: 8479
Turkish: 8482
Turkmen: 8475
Twi: 8487
Ukrainian: 8575
Urdu: 8582
Uzbek: 8590
Vietnamese: 8673
Volapük: 8679
Welsh: 6789
Wolof: 8779
Xhosa: 8872
Yiddish: 7473
Yoruba: 8979
Zulu: 9085
DVD
PP-Sample.book 45 ページ 2004年3月8日 月曜日 午後6時3分
Various Settings
46
Preparation
Press [DVD].
[1] While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “SETUP” with [3, 4, 2, 1] and press
[ENTER].
[3] Select “Set Up”
tab with [3, 4]
and press [2,
1].
[4] Select “Auto Clock Setting” with [3, 4] and
press [ENTER].
[5] Press [ENTER].
Auto setting starts. This can take some time, up to a few hours in
some cases. The following screen appears when setting is
complete.
If the time was not set correctly, use manual clock setting or
time zone adjust.
DST, Daylight Saving Time, shows the summertime setting.
TIME ZONE shows the time difference from Greenwich mean
time (GMT).
EST (Eastern Standard Time) l GMT j5
CST (Central Standard Time) l GMT j6
MST (Mountain Standard Time) l GMT j7
PST (Pacific Standard Time) l GMT j8
AST (Alaska Standard Time) l GMT j9
HST (Hawaii Standard Time) l GMT j10
For other areas: xx hr
[6] Press [ENTER].
To cancel partway
Press [RETURN].
Adjust the time zone (j1 or i1) if it was not set correctly with auto
clock setting.
You cannot change this setting if you set the clock manually.
[4] Select “Time Zone Adjust” with [3, 4] and
press [ENTER].
[5] Select “j1” or “i1” with [3, 4] and press
[ENTER].
[4] Select “Manual
Clock Setting”
with [3, 4] and
press [ENTER].
[5] Use [2, 1] to
select the item
you want to
change and
press [3, 4] to change the setting.
DST (Daylight Saving Time): ON or OFF
If you select “ON”, the clock is advanced one hour starting at
2 a.m. on the first Sunday in April and ending at 2 a.m. on the
last Sunday in October.
TIME ZONE (l above)
[6] Press [ENTER].
The clock starts.
When you change the time zone, the recording times for titles
recorded before the time zone was changed also change to
correspond to the new time zone.
Clock Settings
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
STATUSDISPLAY
SUB MENU
DVD
STATUS
RETURN
FUNCTIONS
3, 4, 2, 1
ENTER
POWER
VOLUME
CH
INPUT SELECT
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
OUTPUT
Off Timer
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
Remote Control Code
DVD/VHS Output
6 hr
Automatic
Set Code 1
Time Zone Adjust
Re-initialize Settings
0
Auto Clock Setting
Manual Clock Setting
SETUP
1 Auto Clock Setting
Auto Clock Setting
Auto Clock Setting is complete.
7/15/2004 11:15 AM
DST................... ON
TIME ZONE..... CST
1 Time Zone Adjust
1 Manual Clock Setting
To return to the previous screen
Press [RETURN].
Time Zone Adjust
0
j1
i1
Manual Clock Setting
/ :
/
SAT PM
MONTH DAY YEAR
HOUR MINUTE
1
1
12 00
2000
DST TIME ZONE
OFF
EST
DVD
PP-Sample.book 46 ページ 2004年3月8日 月曜日 午後6時3分
Various Settings
47
By using the FUNCTIONS window you can access the main
functions quickly and easily.
Preparation
Press [DVD].
[1] While stopped
Press [FUNCTIONS].
Functions displayed depend on the type of disc.
[2] Press [3, 4, 2, 1] to select an item and press
[ENTER].
To exit the FUNCTIONS window
Press [FUNCTIONS].
Preparation
Press [DVD].
Status messages appear on the TV when operating the unit to show
you what operation was performed and what condition the unit is in.
Press [STATUS] to change the information
displayed.
The display changes each time you press the button.
For example, DVD-RAM
(1) Current medium
(2) Current recording or play status, input
channel
Shows the current state of the unit and
the input channel.
REC: Recording
PAUSE: Recording paused
PLAY: Playing
PLAY t1.3: Quick Viewing (Play k1.3)
;: Playing Paused
5: Fast forwarding (5 speeds)
6: Rewinding (5 speeds)
F: Slow-motion (5 speeds)
G: Reverse slow-motion (5 speeds)
OPEN/CLOSE: Indicates the status of the disc tray
(3) Audio type (l 23, 27)
(4) Available recording time and recording mode
(e.g.: “2:34 XP” indicates 2 hours and 34 minutes in XP mode)
(5) The current date and time
(6) Recording time
Shows recording time, recording mode and a rough guide to
how much space has been used for recording on the disc.
(7) Elapsed play time
(8) Play position
(9) Amount of recording space used
FUNCTIONS window
Status displays
Changing the information displayed
DVD
DVD-RAM
DIRECT NAVIGATOR
TIMER RECORDING
PLAY LIST
SETUP
FLEXIBLE RECORDING
DISC SETTING
Record
Dubbing
/ Edit
Set up
Play back
DISC PROTECTION OFF
CARTRIDGE PROTECTION OFF
2:34 XP6/8 10:15 PM
T2 0:05.14 XP
T1 0:00.10 SP
Remain
π
π
π
REC
PLAY
DVD-RAM
L R
REC
PLAY
DVD-RAM
L R
No display
Display examples
REC
PLAY
DVD-RAM
L R
(1)
(2)
(3)
2:34 XP6/8 10:15 PM
T2 0:05.14 XP
T1 0:00.10 SP
Remain
π
π
π
(5)
(6)
(7)
(8)
(9)
(4)
DVD
PP-Sample.book 47 ページ 2004年3月8日 月曜日 午後6時3分
48
[[VHS]]
Before Use
The surface from which you can see a roll of tape should face up,
Insert a video cassette.
This unit is automatically turned on.
To eject a video cassette
You can eject a video cassette when the unit is in standby mode. It switches
back to standby once it ejects the video cassette.
For main unit.
Press [<, EJECT] on the main unit.
For remote control.
Press [VHS] and then press and hold [, STOP] for about 3 or more seconds.
Break out the video cassette’s tab to prevent accidental erasure. Cover the hole with a double layer of
adhesive tape when you want to use the video cassette for recording again.
You can use video cassettes with the VHS and S-VHS marks, but this unit is unable to make full use of the
characteristics of S-VHS video cassettes.
Poor quality or damaged video cassettes can cause the heads to become dirty and malfunction. Store your video cassettes carefully and
discard them when they become dirty or damaged.
Never use video cassettes on which juice has been spilt or those that are extremely damaged since this will not only cause the heads to
become dirty, but will also make the unit malfunction.
Cleaning the video heads
Dirt on the video heads can cause poor recording and play.
If the picture does not improve, use an optional head-cleaning cassette (part number NV-TCL30PT). If the problem persists, seek advice from
a qualified service person.
Inserting video cassette
Video cassette information
Video cassettes
Video cassette care
Maintenance
Tab
VHS
PP-Sample.book 48 ページ 2004年3月8日 月曜日 午後6時3分
49
Playback
Preparation
Select the unit viewing channel (or the AV input) on the TV.
Press [VHS].
[1] Press [Í, DVD/VHS POWER] to turn the unit on.
[2] Insert a recorded video cassette.
(l 48)
[3] Press [1, PLAY].
Play starts automatically if you insert a video cassette that has
had its tab removed.
To still playback
Press [;, PAUSE]. (Press again to restart play.)
To stop play
Press [, STOP].
Note:
When the unit is off, an inserted video cassette can be played back
by pressing [1, PLAY].
When the tape reaches its end, this unit automatically rewinds it to
the beginning. This function does not work during timer recording,
fast-forwarding and specified stop recording.
Jet Search, cue, review or slow playback will be automatically
released after 10 minutes, and still playback, after 5 minutes.
When viewing a still picture or slow playback, the picture that
appears in VP mode may be distorted.
When playing back a tape which was recorded on another VCR, it
may be necessary to adjust tracking (l 50). In some cases the
picture quality may still be inferior. This is due to format constraints.
While stopped
Press [6] (backward)/[5] (forward).
During play
Tap or keep pressing [6] (backward)/[5]
(forward).
If you keep pressing these buttons, playback restarts by releasing
them.
Press [1, PLAY] to restart playback.
During play
Tap [6] (backward)/[5] (forward) twice. You
can increase Cue/Review search speed.
Press [1, PLAY] to restart playback.
Select search speed to view the recorded picture. (l 56)
The picture that appears in EP or VP mode at approx. 35 times
speed may be distorted. A vertical scroll may occur. It is not a
malfunction but if it happens, change to approx. 27 times speed.
The picture may not be in colour or may be distorted depending on
the TV.
During play
Press and hold [;, PAUSE] for 2 seconds or more.
Press [1, PLAY] to restart playback.
To perform a Higher Speed Rewind
Press [JET REW6].
The “J. REW” indication appears on the TV screen (except when the
remaining tape time indication appears).
Depending on the tape or an operating condition, the rewind speed
may change somewhat.
The tape counter is reset to “0:00.00” when the tape is rewound to
the beginning.
Depending on the tape, this function may not work.
Playing a video cassette
Í
VHS
POWER
VOLUME
CH
INPUT SELECT
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
OUTPUT
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
CM SKIP
CANCEL/RESET
AUDIO
VCR Plus+
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
CHAPTER
JET REW
DVD ERASE
6 JET REW
1
;
6, 5
Preparation
Press [VHS].
Fast-forward / Rewind
Cue / Review
Jet Search
Slow
Jet Rewind
VHS
PP-Sample.book 49 ページ 2004年3月8日 月曜日 午後6時3分
Playback
50
It is also possible to play back tapes recorded in the S-VHS system.
Some picture noise may occur depending on the type of tape used.
It is not possible to fully obtain the high resolution that S-VHS is
capable of.
It is not possible to record in the S-VHS system with this unit.
During play or while stopped
Keep pressing [1, PLAY] for 5 or more
seconds.
The “RP” indication appears on the display.
At the end of the program, the tape rewinds to the
beginning of the program and plays it again (it only
works if there is at least 5 seconds blank at the end of the
program). This repeats until you cancel it.
To cancel
Press [, STOP].
The unit usually makes tracking adjustments, but you may need to
do it manually if noise appears on a tape recorded on other
equipment.
During play
Press [TRACKING/V-LOCK, r] or
[TRACKING/V-LOCK, s].
Repeat until the noise disappears.
Adjust the vertical to stop the picture from jiggling while paused.
While paused
Press [TRACKING/V-LOCK, r] or
[TRACKING/V-LOCK, s].
Repeat until the jiggling stops.
To return to auto tracking
Press both [TRACKING/V-LOCK, r] and [TRACKING/V-LOCK, s]
simultaneously.
To remove the noise from a paused picture
Start slow play, then adjust the tracking.
Note:
This may not work with some TV models and tapes.
You can also adjust the tracking and vertical with [CH, W, X] on the
unit.
Preparation
Press [VHS].
S-VHS Quasi Playback (SQPB)
Repeat Playback
REC MODE
VHS
STATUS
TV/VIDEO
1
;
CH, W, X
TRACKING/
V-LOCK, r, s
µ
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
POWER
TIME SLIP
CHAPTER
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
DVD ERASE
VCR Plus+
OUTPUT
Numeric
Buttons
Adjusting the playback picture
Manual tracking
Vertical locking adjustment
VHS
PP-Sample.book 50 ページ 2004年3月8日 月曜日 午後6時3分
51
Recording
Preparation
Select the unit viewing channel (or the AV input) on the TV.
Check that the clock is set to the correct time. If it has not been set,
refer to page 46.
Press [VHS].
[1] Insert a video cassette with an intact erasure
prevention tab.
(l 48)
[2] Press [CH, W, X] to select the TV station.
If you keep pressing these buttons, the channels change
quickly.
You can also select channels with the numeric buttons.
TV Mode (Airwaves)
e.g., “5”: [0] )[5]
“15”: [1] )[5]
CATV Mode (Cable)
e.g., “5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
“115”: [1] )[1] )[5]
[3] Press [REC MODE] to select the tape speed.
Each time you press the button:
SP>EP>VP>SP
[4] Press [¥, VHS REC] to start recording.
To pause Recording
Press [;, PAUSE]. (Press it again to restart recording.)
To stop recording
Press [, STOP].
Note:
Even if the video cassette you use is labeled “S-VHS”, it is not
possible to record in the S-VHS system with this unit. It
records in normal VHS system.
You cannot play VP recording on other equipment.
You cannot change channels while recording. You can change
channels while in pause mode.
When recording is paused for more than 5 minutes, the unit returns
to stop mode.
To Display the Approximate Remaining Tape Time
[1] Select “TAPE SELECT” from the on screen display and select the
corresponding tape length. (l 56)
[2] Press [STATUS].
The display changes as follows each time [STATUS] is pressed.
Clock )Counter )Remaining Tape Time )Clock
The remaining tape time may not be displayed correctly depending
on the tape used.
To specify a time to stop recording
While recording
Press [¥, VHS REC] to select the recording time.
On the main unit, press [¥, REC].
Unit’s Display
Each time you press the button:
Counter (cancel) # 0:30 # 1:00 # 1:30
^------- 4:00 ! 3:00 ! 2:00 !--------}
For your reference
This does not work during timer recording.
Recording stops and the set time is cleared if you press [,STOP].
The set time is cleared if you change the recording mode or
channel while recording is paused.
[1] Press [TV/VIDEO] to change the input mode to
“TV”.
[2] Press TV’s [CH, W, X] to select the desired TV
channel.
For your reference
You can also do this if the unit is making a timer recording.
The recording is unaffected.
You can watch play or record discs while recording. The recording
will not be affected.
DVD playback (l 21)
DVD recording (l 26)
-
When a tuner channel is being recorded on VHS, you can only
record the same channel on DVD.
Recording TV programs
Tape speed
SP: You can record the length shown on the tape.
EP: Three times the length of SP mode.
VP: Five times the length of SP mode.
To have a longer recording capacity, select “EP” or “VP”.
If the image quality is important to you or if you wish to store the
tape for a long period, select “SP”.
This unit can play tapes recorded with LP mode on other
equipment (“LP” lights on the display).
VP mode:
“VP” flashes on the unit’s display for 8 seconds after recording
has started.
A tape recorded in VP mode by this unit cannot be played
back by other VCRs. It is recommended to distinguish it from
other tapes by indicating “VP” on the tape label, etc.
It takes more time for automatic tracking to work when playing
tapes recorded with VP mode, and it may not work at all with
some tapes. Do tracking manually if this is the case (l 50).
Watching the TV while recording
Playing/Recording DVD while recording
VHS
PP-Sample.book 51 ページ 2004年3月8日 月曜日 午後6時3分
52
Timer Recording
You can enter up to 16 programs up to a month in advance.
Preparation
Select the unit viewing channel (or the AV input) on the TV.
Check that the clock is set to the correct time. If it has not been set,
refer to page 46.
Insert a video cassette with an intact erasure prevention tab.
(l 48)
Press [VHS].
Entering the PlusCode numbers is an easy way of timer recording.
You can find these codes in TV listings in newspapers and
magazines.
When connecting a cable TV box or satellite receiver, the VCR
Plusi system does not work. Program the timer recording
manually (l right).
[1] Press [VCR Plus_].
[2] Press the numeric buttons to enter the
PlusCode
number.
Press [2] to move back to correct a digit.
[3] Press [ENTER].
Confirm the program
and correct it if
necessary using [3,
4, 2, 1]. (l right,
step 3).
“INVALID ENTRY” is displayed when you enter the wrong
PlusCode number. Reenter the PlusCode number.
[4] If the program is correct
Press [ENTER].
” lights on the unit’s display.
[5] Press [RETURN].
When connecting a cable TV box or satellite receiver, select the
channel on the cable TV box or satellite receiver before timer
recording starts.
[1] Press [PROG/CHECK].
Make sure “NEW TIMER PROGRAM” is selected.
[2] Press [ENTER].
[3] Use [1] to move
and change the
items with
[3, 4].
You may use the
numeric buttons to
enter “CH”, “DATE”, “ON” and “OFF”.
CH (Program Position/TV Station Name)
DATE
You can also make a daily or weekly program.
ON (start time)/OFF (finish time)
The time increases or decreases in 30-minute increments if
you hold down the button.
Tape speed
You can also press [REC MODE] to change the recording
mode.
SP,.EP,.VP,.A°,.SP... (l 51)
° Auto SP/EP mode (l 53)
[4] Press [ENTER] when you have finished making
changes.
” lights on the unit’s display.
To continue programming:
Select “NEW TIMER PROGRAM” and repeat steps 2–4.
[5] Press [RETURN].
Note
” and “1” flashes when the unit cannot perform timer
recording (e.g., video cassette with no prevention tab or no video
casette in the cassette compartment).
The actual time recorded may be longer than the program itself
when TV programs are recorded using VCR Plus_ system.
If you set “DST” (Daylight Saving Time) to “ON” when manually
setting the clock (l 46), timer recording may not work when
summer switches to winter and vice versa.
To stop recording while a program is working
Press [, STOP], then [ENTER] within 5 seconds.
You can also press and hold [] on the main unit for more than 3
seconds to stop recording.
Caution for Timer recording
Timer recording automatically starts at the set time.
Timer recording can be started whether the unit is turned on or
off. When the unit is turned off, the sound and the video cannot
be outputted to the TV.
Using VCR Plus_ system
VHS
RETURN
VCR Plusi
PROG/CHECK
REC MODE
3, 4, 2, 1
ENTER
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
POWER
TIME SLIP
CHAPTER
JET REW
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
DVD ERASE
VCR Plus+
OUTPUT
Numeric
Buttons
VCR Plus+
R 2 : 00 SP
10/13 WE 10:12 AM
s s s s s s s s
TIMER
PROGRAM
R 2 : 00 SP
10/13 WE 10:12 AM
CH DATE ON OFF
25
13WE
10:12 AM
10:30 AM
S
P
Manual programming
CH DATE ON OFF
25 13WE 10:12 AM 10:30 AM S P
NEW TIMER PROGRAM
Highlighted line
is ready for
programming.
TIMER
PROGRAM
R 2 : 00 SP
10/13 WE 10:12 AM
CH DATE ON OFF
ss
ssss
s : ss
s : ss
s s
TIMER
PROGRAM
R 2 : 00 SP
10/13 WE 10:12 AM
CH DATE ON OFF
6
SA
6:00 PM
7:00 PM
S
P
VHS
PP-Sample.book 52 ページ 2004年3月8日 月曜日 午後6時3分
Timer Recording
53
If, at the beginning of a timer program, there is not enough tape
remaining to complete the recording, the SP/EP function will
automatically run the tape at EP speed. This ensures that the entire
program will be recorded. If EP mode is not enough to stretch the
remaining tape to fit the whole program you will not be able to record
all of the TV program.
It is not possible to automatically activate VP mode.
The tape length must be set correctly. (l 56)
Some tapes may not work correctly.
If the tape speed changes from SP to EP during a timer recording,
some brief picture distortion occurs at that point.
Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Preparation
Press [VHS].
[1] Press [PROG/CHECK].
[2] Press [3, 4] to select the program.
[3] Press [CANCEL/RESET, ¢] to delete,
You cannot delete programs that are currently recording.
or press [ENTER] to change.
The timer recording setting screen appears.
[4] If you pressed [ENTER] in step 3,
Use [3, 4, 2, 1] to change and press [ENTER].
[5] Press [RETURN].
For your reference
Programs that failed to record are not deleted from the list
immediately, but are deleted from the list automatically at 4 a.m.
two days later.
Timer recording for TV programs cannot be executed on both DVD
and VHS at the same time.
Make sure the timer recording start times do not overlap on both
DVD (l 29) and VHS (l left) timer-programming screens.
When the timer recording settings overlap:
When the start time of both timer recordings is the same, the timer
recording of DVD has priority.
When tuner channels are specified in timer recordings on both VHS
and DVD, only one timer recording can be started.
When the interval between the first timer recording and the second
timer recording on DVD is 1 minute or less as shown below, the
second timer recording on DVD has priority over the timer
recording on VHS even if its start time is later than the timer
recording on VHS.
Auto SP/EP mode
Check, change or delete programs
Timer programming
Video tape
1st program
(30 min.)
30 min. at SP
2nd program (60 min.)
15 min.
at SP
45min.
at EP
CH DATE ON OFF
6 SA 6:00 PM 7:00 PM S P
25 13WE 10:12 AM 10:30 AM S P
NEW TIMER PROGRAM
Cautions for using timer recording on
DVD and VHS
1 minute
4 CH
10 CH
2 CH
VHS
DVD
VHS
PP-Sample.book 53 ページ 2004年3月8日 月曜日 午後6時3分
54
Advanced Operations
Preparation
Select the unit viewing channel (or the AV input) on the TV.
Press [VHS].
This unit can display a list of the recorded programs on the inserted
tape on the TV screen. You can then select the desired program, and
this unit will quickly reach its beginning and start playback.
Preparation
The tape length of the inserted tape must be set correctly. (l 56)
The unit must not be in timer recording.
A program of at least 15 minutes must be recorded on the tape.
[1] Press [VHS MENU] to display the VHS MENU.
[2] Press [3, 4] to select “DIRECT NAVIGATOR”
and then select “ON” with [2, 1].
[3] Record programs
(l 51, 52).
The unit makes the list as you record.
[1] Press [DIRECT
NAVIGATOR].
When [DIRECT
NAVIGATOR] is
pressed during play,
playback stops and
the Direct Navigator
list appears.
[2] Press [DIRECT NAVIGATOR] several times to
select the program.
Every time you press [DIRECT NAVIGATOR], the highlight
moves upwards.
After 3 seconds, the unit starts to search for the beginning of
the selected program and playback will start automatically.
To cancel the Direct Navigator list
Press [VHS MENU].
To delete the Direct Navigator data of a single video
cassette tape
Keep [CANCEL/RESET, ¢] pressed for more than 5 seconds while
the Direct Navigator list appears.
“- -” appears on the list.
To delete all the Direct Navigator data stored in the
unit’s memory
(l 56)
To Demonstrate the Direct Navigator Function
Keep [DIRECT NAVIGATOR] pressed for more than 5 seconds
without inserting a video cassette.
Direct Navigator
To save Direct Navigator data
VHS
VHS MENU
DIRECT NAVIGATOR
3, 4, 2, 1
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
POWER
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
VCR Plus+
OUTPUT
:, 9
VHS MENU
OSD ¥ ON OFF
TAPE SELECT
¥ T120 T160 T180
BLUE BACK
¥ ON OFF
DIRECT NAVIGATOR
¥ ON OFF
DELETE NAVIDATA
¥ NO YES
JET SEARCH t 27
¥ t 35
SELECT
END
: j/i
: MENU
Selecting programs to play
DIRECT NAVIGATOR
1 10/18 10:30 PM MUSIC
124 10/19 3:00 PM SPORT
5 10/21 10:15 AM
A2 10/25 8:30 PM
3 10/27 9:30 AM EDUCA
CH DATE ON CATEGORY
VHS
PP-Sample.book 54 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
55
You can find what kind of
programs are recorded
with the character and the
icon indicators.
Preparation
Press [VHS].
[1] Press [DIRECT
NAVIGATOR].
[2] Press [DIRECT
NAVIGATOR]
several times to
select the program and press [1].
[3] Press [3, 4, 2, 1]
to select the desired
category.
[4] Press [VHS MENU].
Note:
The Direct Navigator list is stored on each tape. Up to 20 tapes and
50 programs can be registered.
The Direct Navigator program list displays up to 14 programs. If you
have already stored 14 programs on a tape and then store another
one, the oldest item is replaced.
Signals approximately 10 seconds before and after the current tape
position are checked. During checking, “CHECKING DIRECT
NAVIGATOR DATA.” is displayed on the TV screen.
Checking cannot be performed properly where there are no
signals, such as unrecorded portions of the tape. In this case, press
[DIRECT NAVIGATOR] at a portion of the tape where a program
has been recorded on this unit. When a signal still cannot be found,
the message “CAN NOT FIND DIRECT NAVIGATOR DATA.”
appears on the TV.
“REMAINING PROGRAM 0 DELETE DIRECT NAVIGATOR
DATA.” appears when you try to store more than 50 programs. The
new item is added and the oldest item is deleted.
“REMAINING CASSETTE 0 FOR DIRECT NAVIGATOR DELETE
DIRECT NAVIGATOR DATA.” appears when you try to store items
for more than 20 tapes. Programs recorded without deleting data
as instructed are not registered in the list.
The list does not appear when playing tapes recorded on other
equipment.
When recording over the same location on a tape, it may not work
correctly.
When playback starts after searching with the Direct Navigator
function or the index search function, recorded programming data
(called Time Stamp) appears on the TV screen for approx.
5 seconds.
Preparation
Display the unit’s picture on the TV.
Press [VHS].
Be sure to set “OSD” in the “VHS MENU” to “ON”. (l 56)
On Screen Display
Note:
Time Stamp may not appear if the beginning of the Direct Navigator
data is not recorded 25 minutes before and after the current tape
position even when index signals are recorded.
This unit automatically records special index signals on the tape
every time a recording is started. The index search function makes
use of these index signals to let you find the beginning of a desired
program quickly and easily.
Preparation
Display the unit’s picture on the TV.
Press [VHS].
Insert a recorded video cassette.
While stopped or during normal play
Press [: ] or [ 9].
Each press increases the number of skips.
To cancel the Index Search or to stop playback
Press [, STOP].
Note:
Up to 20 index signals can be searched for in both directions.
When you press either one of the button too much, you can control
the number of skips by pressing the opposite button.
The figure on the display decreases by 1 each time an index signal
is located.
This feature may not work correctly if the marks are too close
together. Make recordings of at least 5 minutes.
Set the category
Category Indicator Icon
MOVIE MOVIE
MUSIC MUSIC
DRAMA DRAMA
EDUCATION EDUCA
DOCUMENTARY DOCUM
SPORTS SPORT
CHILDREN CHILD
NEWS NEWS
OTHERS OTHER
END : MENU
CATEGORY SETTING
MOVIE
MUSIC
DRAMA
EDUCA
DOCUM
SPORT
CHILD
NEWS
OTHER
–––––
SELECT:
To Check the Recorded Programming
Data (Time Stamp Function)
VHS Index Search System (VISS)
Index signals are recorded in the following cases.
When a recording is started by pressing [¥, VHS REC].
When timer recording is activated.
CH 2
10/26. TH ON
8:02
PM
VHS
PP-Sample.book 55 ページ 2004年3月8日 月曜日 午後6時3分
56
Various Settings
Preparation
Press [VHS].
[1] While stopped
Press [VHS MENU].
[2] Use [3, 4] to select a desired item.
[3] Use [2, 1] to change the setting.
To exit the settings screen
Press [VHS MENU]
This description shows the initial settings for this unit. For
details on menu operation (l left).
Underlined items are the factory presets.
VHS MENU
OSD
(l 57)
[ON
] [OFF]
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time.
[T120
] [T160] [T180]
[T120
]: T30, T60, T90 and T120 tapes
[T160]: T140 and T160 tapes
[T180]: T180 tapes
BLUE BACK
[ON] [OFF]
DIRECT NAVIGATOR (l 54)
[ON] [OFF
]
DELETE NAVIDATA
Delete all the Navigation data registered in the unit.
To delete data on a single tape (l 54).
[NO
] [YES]
[YES]: Then press [ENTER] when you want to delete all the
Direct Navigator data.
JET SEARCH (l 49)
Set the speed for JET SEARCH when playing EP and VP tapes.
It is possible to view the picture recorded in EP or VP mode at
approx. 27 or 35 times speed.
[k27] [k
35]
[k27]: Select [k27] if the picture is poor at [k35]
Changing the unit’s settings
Common procedures
VHS
VHS MENU
AUDIO
RETURN
3, 4, 2, 1
ENTER
STATUS
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
POWER
TIME SLIP
CHAPTER
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
DVD ERASE
VCR Plus+
OUTPUT
VHS MENU
SELECT
END
: j/i
: MENU
OSD ¥ ON OFF
TAPE SELECT
¥ T120 T160 T180
BLUE BACK
¥ ON OFF
DIRECT NAVIGATOR ON
¥ OFF
DELETE NAVIDATA
¥ NO YES
JET SEARCH t 27
¥ t 35
Summary of settings
ON Messages appear on the TV for about 5 seconds after
you perform operations.
The on screen display will always appear on the TV
screen during rewind, Jet Rewind and fast forward.
OFF Messages do not appear.
ON The screen shows a blue background when you play
unrecorded portions.
Off The blue background function is deactivated.
ON Direct Navigator data automatically registered.
OFF Data not registered.
VHS
PP-Sample.book 56 ページ 2004年3月8日 月曜日 午後6時3分
Various Settings
57
To see these displays, set the “OSD” item in the “VHS MENU” to
“ON” (l 56).
Press [STATUS].
The time and operation details appear on the screen for about 5
seconds.
Note:
These displays do not appear when paused or during slow play.
The on-screen display may be distorted depending on the playback
tape or the input signal.
When a stereo and/or SAP broadcast is received, “STEREO” or
“SAP” light to show the type of broadcast.
When playing a tape:
To change the audio, press [AUDIO].
The audio changes as follows:
Stereo>L>R>Normal audio track>Stereo
While watching TV:
You cannot change audio.
When a stereo broadcast or SAP broadcast is recorded and played
back on this unit, stereo sound will be automatically selected in the
case of a stereo broadcast and SAP sound will be automatically
selected in the case of a dual-sound broadcast (Mono and SAP or
Stereo and SAP).
The wrong choice may be made if the program is played back from
an interim point. (In a case like this, press [AUDIO] and select the
right sound only in playback.)
The function will not work with a cassette which has been recorded
using external equipment.
Preparation
Press [VHS].
Various on-screen display indications
1 Channel display
2 STEREO/SAP indication
Indicates when a program is broadcast in stereo or SAP.
3 L and R indicators (appears only in playback)
The Left (L) and Right (R) indicators show which sound mode
is selected as follows:
Stereo: Both the L and R indicators appear.
L: The L indicator appears.
R: The R indicator appears.
Normal: Neither the L nor R indicator appears.
4 Operation status display
5 Shows the time and tape counter
Pressing [STATUS] once makes the on-screen display
appear. After that, press the button repeatedly to change the
display as follows:
Present time>Tape counter>Remaining tape
time>Present time
during Index search: S 01” to “S 20” is displayed.
during Jet Rewind: “J. REW” is displayed.
Press [CANCEL/RESET, ¢] to reset the tape counter
(elapsed time) to “0:00.00”.
The tape counter is automatically reset to “0:00.00” when
inserting a video cassette.
The remaining time is approximate. It will be incorrect if you
set the wrong tape time in the “TAPE SELECT” item in the
“VHS MENU” and if the tape is of poor quality.
6 Cassette-in indicator
Shows whether you have loaded a video cassette.
7 Tape speed indicator (l 51)
CH 1
STEREO
L R
0:00.22
SP 1
123 4 5
6
7
Changing audio
Auto Bilingual Choice Function
VHS
PP-Sample.book 57 ページ 2004年3月8日 月曜日 午後6時3分
58
[[DVD/VHS]]
Advanced Operations
[RAM] [DVD-R]
You can transfer (dubbing) programs recorded on a tape onto a disc°
with one stroke of the button.
In One-Touch Dubbing, programs are automatically dubbed onto the
disc from the location of playback on the tape.
° Available discs for transfer (dubbing) from tape are DVD-RAM and
non-finalized DVD-R.
Preparation
Select the unit viewing channel (or the AV input) on the TV.
DVD
Release protection (disc l 30, cartridge l 18). [RAM]
Insert a disc and confirm there is sufficient empty space for
recording on it. (l 20, 47)
Select the recording mode.
When SAP broadcast program is played back on VHS, the audio
on DVD is recorded according to the settings in “Select MTS” in the
initial settings. (l 44) [DVD-R]
VHS
Insert the video cassette containing the program to be copied
(l 48).
[1] While both DVD/VHS are stopped,
Press and hold [ DVD, DUBBING] for 3 seconds
or more.
On the main unit, press [ DVD].
Check if transfer (dubbing) starts properly.
The “DUBBING” indicator on the main unit lights.
Dubbing is automatically completed when the tape reaches its
end or the disc becomes full.
To stop transfer (dubbing) halfway through
Press [, STOP].
When transfer (dubbing) is completed, a message indicating the
end of transfer (dubbing) appears on the TV screen and then
disappears a few seconds later.
When transfer (dubbing) is started, the following
operations also start automatically
“OSD” on VHS MENU ) “OFF” (l 56)
Recording channel indicator on DVD ) “TP”
Output to TV ) DVD output
Only the following operations are allowed while
transfer (dubbing)
Stopping transfer (dubbing) by pressing [, STOP].
Note:
While One Touch Transfer (Dubbing) is activated, a timer recording
cannot be started.
When “DVD/VHS Output” is set to “Manual” (l 43), or when VHS
output is selected in starting transfer (dubbing), the output is
switched to DVD automatically at the time when transfer (dubbing)
is started.
-
When the transfer (dubbing) is already started, you cannot switch
the output manually.
When the transfer (dubbing) is not started or not executed, the
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
When a Copy-guarded tape is inserted, a message appears on the
display and the recording stops on the spot.
If a part of the tape recorded in VP mode is dubbed to disc, noises
may appear at the beginning of the dubbed part.
Transfer (Dubbing) from VHS
VHS
DVD
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
TIME SLIP
CHAPTER
JET REW
STATUSDISPLAY
DVD ERASE
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
POWER
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
VCR Plus+
OUTPUT
REC MODE
1
;
CH, W, X
µ, DVD REC
DVD
OPEN/CLOSE
TIME SLIP
REC
CH
/k1.3
DUBBING
VHS
DVD
DUBBING indicator
One Touch Transfer (Dubbing) (VHS l DVD)
Dividing a title to be dubbed
In One-Touch Transfer (Dubbing) from VHS to DVD, the title is
divided by index signal detected and then recorded. You can
search desired titles with Direct Navigator’s Title View (l 33)
after transfer (dubbing) to DVD.
Titles recorded within 15 minutes (25 minutes in VP mode) of
each other may not be divided properly.
The recording time may become longer than the original title
depending on the number of index signals.
VHSDVD
PP-Sample.book 58 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
59
[RAM] [DVD-R]
You can specify the position to start transfer (dubbing) of the
program recorded on the tape to the disc.
Available discs for transfer (dubbing) from tape are DVD-RAM and
non-finalized DVD-R.
Copy-guarded video tapes cannot be dubbed. Most video tapes are
copy-guarded to prevent illegal reproduction and they cannot be
recorded with the following procedure.
Preparation
Select the unit viewing channel (or the AV input) on the TV.
DVD
Release protection (disc l 30, cartridge l 18). [RAM]
Insert a disc and confirm there is sufficient empty space for
recording on it. (l 20, 47)
VHS
Insert the video cassette containing the program to be copied
(l 48).
Check the channel. If “DC” channel is selected, transfer (dubbing)
does not work properly.
-
When the “DC” channel is selected on VHS, you cannot select the
“TP” channel.
[1] Press [VHS] and press [1, PLAY].
Start playing the video cassette and find the recording start point.
Select the audio to be played (the audio to be recorded)
beforehand.
[2] Press [;, PAUSE] at the start point of the
recording.
[3] Press [DVD].
[4] Select “TP” channel with [CH, W, X].
The VHS picture is displayed on the TV.
[5] Press [REC MODE] to select the recording
mode.
[6] Press [¥, DVD REC].
Disc recording and VHS play start at the same time.
When transfer (dubbing) is started, the following
operations also start automatically
“OSD” on VHS MENU ) “OFF” (l 56)
Only the following operations are allowed while
transferring (dubbing)
Turning the unit off/on
Stopping transfer (dubbing) by pressing [STOP]
Note:
When the transfer (dubbing) is already started, you can switch the
output manually.
When a Copy-guarded tape is inserted, the message appears on
the display and the recording stops on the spot.
If a part of the tape recorded in VP mode is dubbed to disc, noises
may appear on the beginning of the dubbed part.
Manual Transfer (Dubbing)
To pause or stop Manual Transfer (Dubbing)
You cannot stop or pause on DVD and VHS at the same time
To pause or stop recording
Press [DVD] and press [;, PAUSE] or [, STOP].
To pause or stop play
Press [VHS] and press [;, PAUSE] or [, STOP].
About TP channel
(TP: Dubbing input channel)
TP channel can be recorded only when the DVD input channel
is set to “TP”.
When you play back a tape turning the channel to “TP”, the
picture on VHS is displayed on the TV screen.
VHSDVD
PP-Sample.book 59 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
60
You can transfer (dubbing) programs recorded on a disc° onto a tape
with one stroke of the button.
In One-Touch Dubbing, all contents on the disc are automatically
dubbed onto the tapes.
° Available discs for transfer (dubbing) onto tape are DVD-RAM and
non-finalized DVD-R. Most DVD videos cannot be dubbed
because they are copy-guarded.
Preparation
Select the unit viewing channel (or the AV input) on the TV.
DVD
Insert the disc containing the program to be copied (l 20).
VHS
Insert a video cassette with an intact erasure prevention tab.
(l 48)
Confirm that the remaining tape time is sufficient for recording.
(l 57)
Select the recording mode.
[1] While both DVD/VHS are stopped,
Press and hold [VHS , DUBBING] for 3 seconds
or more.
On the main unit, press [VHS ].
Check if transfer (dubbing) starts properly.
The [DUBBING] indicator on the main unit lights.
Dubbing is automatically completed when playback of the disc
is finished or the tape reaches its end.
To stop transfer (dubbing) halfway through
Press [, STOP].
When transfer (dubbing) is completed, a message indicating the
end of transfer (dubbing) appears on the TV screen and then
disappears a few seconds later.
When transfer (dubbing) is started, the following
operations also start automatically:
“Status Messages” on Display ) “Off” (l 45)
Recording channel indication on VHS ) “DC”
Output to TV ) VHS output
Audio output when playing back DVD ) Stereo (L R) [RAM]
Only the following operations are allowed while
transfer (dubbing):
Stopping transfer (dubbing) by pressing [, STOP].
Note:
While One Touch Transfer (Dubbing) is activated, timer recording
cannot be started.
When “DVD/VHS Output” is set to “Manual” (l 43), or when DVD
output is selected in starting transfer (dubbing), the output is
switched to VHS automatically at the time when transfer (dubbing)
is started.
-
When the transfer (dubbing) is already started, you cannot switch
the output manually.
When the transfer (dubbing) is not started or not executed, the
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
If you start transfer (dubbing) when “PB” is blinking on the unit’s
display, the DVD is dubbed from the beginning of the title which
you stopped.
Transfer (Dubbing) from DVD
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
TIME SLIP
CHAPTER
JET REW
STATUSDISPLAY
DVD ERASE
VHS
DVD
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
POWER
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
VCR Plus+
OUTPUT
REC MODE
1
;
CH, W, X
µ, VHS REC
VHS
:, 9
OPEN/CLOSE
TIME SLIP
REC
CH
/k1.3
DUBBING
VHS
DVD
DUBBING indicator
One Touch Transfer (Dubbing) (DVD l VHS)
About Recording VISS (l 55)
In One-Touch Dubbing from DVD to VHS, the index signal is
automatically recorded for each title. You can search desired
titles with [: ] or [ 9].
VHSDVD
PP-Sample.book 60 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
61
You can specify the position to start transfer (dubbing) of the
program recorded on the disc to the tape.
Copy-guarded discs cannot be dubbed. Most discs are copy-
guarded to prevent illegal reproduction and they cannot be
recorded with the following procedure.
Preparation
Select the unit viewing channel (or the AV input) on the TV.
DVD
Insert the disc containing the program to be copied (l 20).
Check the channel. If “TP” channel is selected, transfer (dubbing)
does not work properly.
-
When the “TP” channel is selected on DVD, you cannot select the
“DC” channel.
VHS
Insert a video cassette with an intact erasure prevention tab.
(l 48)
Confirm that the remaining tape time is sufficient for recording.
(l 57)
[1] Press [DVD] and press [1, PLAY].
Start playing the disc and find the recording start point.
Select the audio to be played (the audio to be recorded)
beforehand. [RAM]
When the DVD-R is inserted, you cannot select the audio.
[2] Press [;, PAUSE] at the start point of the
recording.
[3] Press [VHS].
[4] Select “DC” channel with [CH, W, X].
The DVD picture is displayed on the TV.
[5] Press [1, PLAY].
Start playing the video cassette and find the recording start point.
[6] Press [;, PAUSE] at the start point of the
recording, then press [¥, VHS REC] to pause.
Put the unit in the recording standby mode.
[7] Press [REC MODE] to select the recording
mode.
[8] Press [;, PAUSE].
VHS recording and disc play start at the same time.
When transfer (dubbing) is started, the following
operations also start automatically:
“Status Messages” on Display ) “Off” (l 45)
Audio output when playing back DVD ) Stereo (L R)
Only the following operations are allowed while
transfer (dubbing):
Turning the unit off/on
Stopping transfer (dubbing) by pressing [STOP]
Note:
When the transfer (dubbing) is already started, you can switch the
output manually.
Manual Transfer (Dubbing)
To pause or stop Manual Transfer (Dubbing)
You cannot stop or pause on DVD and VHS at the same time
To pause or stop recording
Press [VHS] and press [;, PAUSE] or [, STOP].
To pause or stop play
Press [DVD] and press [;, PAUSE] or [, STOP].
About DC channel
(DC: Dubbing input channel)
DC channel can be recorded only when the VHS input
channel is set to “DC”.
When you play back a tape with the channel set to “DC”, the
DVD picture is displayed on the TV screen.
VHSDVD
PP-Sample.book 61 ページ 2004年3月8日 月曜日 午後6時3分
Advanced Operations
62
When connecting to the L2 input terminals on the front of the unit
You can also connect to the L1 input terminals on the rear of the unit.
Before connecting any cables, first make sure that the power for
both units is off. Then, after connecting cables, turn on both units.
Note
When recording using this unit’s input terminals, only the sound
received at the time of recording will be recorded. As long as
secondary audio that is recorded on the media in the external device
is not output to the unit in play, it is not recorded.
If the audio output of the other equipment is monaural, connect to L/
MONO. (Both left and right channels are recorded when connected
through L/MONO.)
The S-VIDEO terminal achieves a more vivid picture than the VIDEO
terminal.
Preparation
DVD [RAM] [DVD-R]
Release protection (disc l 30, cartridge l 18). [RAM]
Press [DVD].
VHS
Insert a video cassette with an intact erasure prevention tab. (l 48)
Press [VHS].
[1] Press [REC MODE] to select the recording mode.
(DVDl 27, VHSl 51)
DVD [RAM] [DVD-R]
- It is also possible to perform Flexible Recording (FR). (l 27)
[2] While stopped
Press [CH, W, X] or [INPUT SELECT] to select the
input channel.
Select L1 or L2.
[3] Start play on the other equipment.
[4] Press [¥, DVD REC] at the point where you want
to start recording.
[3] Press [1, PLAY].
Start playing the video cassette and find the recording start point.
[4] Press [;, PAUSE], then press [¥, VHS REC].
Put the unit in recording standby mode.
[5] Start play on the other equipment.
[6] Press [;, PAUSE] at the point where you want
to start recording.
To skip unwanted parts
Press [;, PAUSE] to pause recording. (Press again to restart recording.)
To stop recording
Press [, STOP].
For your reference
Almost all videos and DVD software on sale have been treated to prevent illegal copying. Such software cannot be recorded.
Recording from an external device
PULL OPEN
EJECT
POWER
Í/I
L2
VIDEO IN L/MONO
AUDIO IN
R
S-VIDEO IN
VHS DVD
CH
(2)
(1)
(3)
(1) Audio/Video cable (not supplied)
A Yellow (VIDEO)
B White (L)
C Red (R)
(2) S video cable (not supplied)
(3) Other playback equipment
VHS
DVD
REC MODE
INPUT SELECT
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
TIME SLIP
CHAPTER
JET REW
STATUSDISPLAY
DVD ERASE
POWER
CANCEL/RESET
VOLUME
CH
INPUT SELECT
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
VCR Pl
OUTPUT
1
;
CH, W, X
µ, VHS REC
µ, DVD REC
1 DVD 1 VHS
VHSDVD
PP-Sample.book 62 ページ 2004年3月8日 月曜日 午後6時3分
63
Helpful Hints
Bitstream
This is the digital form of multi-channel audio data (e.g., 5.1 channel)
before it is decoded into its various channels.
CPRM (Content Protection for Recordable Media)
CPRM is technology used to protect broadcasts that are allowed to
be recorded only once. Such broadcasts can be recorded only with
CPRM compatible recorders and discs.
Dynamic range
Dynamic range is the difference between the lowest level of sound
that can be heard above the noise of the equipment and the highest
level of sound before distortion occurs. Dynamic range compression
means reducing the gap between the loudest and softest sounds.
This means you can listen at low volumes but still hear dialog clearly.
Film and video
DVD-Videos are recorded using either film or video. This unit can
determine which type has been used, then uses the most suitable
method of progressive output.
Film is 24 or 30 frames per second, with motion picture film
generally being 24 frames per second.
Video is 60 fields per second (two fields making up one frame).
Finalize
A process that makes play of a recorded CD-R, CD-RW, DVD-R etc.
possible on equipment that can play such media. You can finalize
DVD-R on this unit.
Formatting
Formatting is the process of making media such as DVD-RAM
recordable on recording equipment.
You can format DVD-RAM on this unit.
Formatting irrevocably erases all recordings on the disc.
Frame and field
Frame refers to the single images that constitute the video you see
on your TV. Each frame consists of two fields.
Frame Field Field
A frame still shows two fields, so there may be some blurring, but
picture quality is generally better.
A field still shows less picture information so it may be rougher, but
there is no blurring.
Linear PCM (LPCM)
These are uncompressed digital signals. CDs are recorded with 44.1
kHz/16 bit PCM, while DVDs use PCM between 48 kHz/16 bit and 96
kHz/24 bit, allowing playback with greater quality sound.
The linear PCM signals output from the DIGITAL AUDIO OUT
OPTICAL terminal are stereo (2 channel).
LPCM sound is available when recording in XP mode.
MP3 (MPEG Audio Layer 3)
An audio compression method that compresses audio to
approximately one tenth of its size without any considerable loss of
audio quality. You can play MP3s you have recorded onto CD-R and
CD-RW.
Pan & Scan/Letterbox
In general, DVD-Video are produced with the intention that they be
viewed on a widescreen TV (16:9 aspect ratio), so images often
don’t fit regular (4:3 aspect ratio) TVs. Two styles of picture,
“Pan & Scan” and “Letterbox”, deal with this problem.
Pan & Scan: The sides are cut off so the picture fills the screen.
Letterbox: Black bands appear at the top and bottom of the
picture so the picture itself appears in an aspect ratio
of 16:9.
Playback control (PBC)
If a Video CD has playback control, you can select scenes and
information with menus.
(This unit is compatible with version 2.0 and 1.1.)
Progressive/Interlace
NTSC, the video signal standard, has 480 interlaced (I) scan lines,
whereas progressive scanning uses twice the number of scan lines.
This is called 480P.
Using progressive output, you can enjoy the high-resolution video
recorded on media such as DVD-Video.
Your TV must be compatible to enjoy progressive video.
Protection
You can prevent accidental erasure by setting writing protection or
erasure protection.
Sampling frequency
Sampling is the process of converting the heights of sound wave
(analog signal) samples taken at set periods into digits (digital
encoding). Sampling frequency is the number of samples taken per
second, so larger numbers mean more faithful reproduction of the
original sound.
VBR (Variable Bitrate)
This is a method of video recording that adjusts the bit rate according
to video signal.
Title/Chapter (DVD-Video)
DVD-Video are divided into large sections (titles) and smaller
sections (chapters). The numbers allocated to these sections are
called title numbers and chapter numbers.
Example
(1) Title 1
(2) Title 2
(3) Chapter 1
(4) Chapter 2
(5) Chapter 3
Track
This is the smallest division on CD and Video CD.
Example
(1) Track 1
(2) Track 2
(3) Track 3
(4) Track 4
(5) Track 5
Glossary
=
+
(1)
(2)
(3)
(4)
(3)
(4)(5)
(1) (2) (3) (4) (5)
VHSDVD
PP-Sample.book 63 ページ 2004年3月8日 月曜日 午後6時3分
Helpful Hints
64
Set up Page
Disc Page
Recording Page
Frequently asked questions
What equipment is necessary to
play multi channel surround
sound?
DVD-Video:
You can play DVD-Video multi channel surround by digitally connecting an amplifier
equipped with a Dolby Digital and a DTS decoder.
DVD-Audio:
This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound.
12
Are the headphones and speakers
directly connected to the unit?
You cannot directly connect to the unit. Connect through the amplifier etc.
12
The TV has both S-VIDEO IN
terminal and COMPONENT VIDEO
IN terminals. Which terminal should
I connect with?
We recommend the COMPONENT VIDEO IN terminal. Component signal outputs the
color difference signals (P
B/PR) and luminance signal (Y) separately in order to achieve
high fidelity in reproducing colors. If the TV is compatible with progressive output, a high
quality picture can be output because this unit’s component video output terminal outputs
a progressive output signal.
10
Is my TV progressive output
compatible?
All Panasonic TV that have 480P input terminals are compatible. Consult the
manufacturer if you have another brand of TV.
Can I play DVD-Video, DVD-Audio
and Video CDs bought in another
country?
You can play them if the video standard is NTSC.
However, you cannot play DVD-Video if their region number does not include “1” or
“ALL”.
18
Can a DVD-Video that does not
have a region number be played?
The DVD-Video region number indicates the disc conforms to a standard. You cannot
play discs that do not have a region number.
Please tell me about DVD-R and
DVD-RW compatibility with this
unit.
This unit records and plays DVD-R. However, you cannot record onto DVD-R discs that
are finalized.
This unit also records and plays 1k–4k recording speed DVD-R discs.
This unit does not record or play DVD-RW.
18
18
18
Please tell me about CD-R and CD-
RW compatibility with this unit.
You can play CD-R and CD-RW on this unit that are created using a compatible format.
You cannot write to a CD-R or CD-RW with this unit.
18, 24
18
Can I record from a commercially
purchased video cassette or DVD?
Most commercially sold video cassettes and DVD are copy protected; therefore,
recording is usually not possible.
Can a DVD-R recorded on this unit
be played on other equipment?
You can play on DVD-R compatible players after finalizing the disc on this unit; however,
due to the condition of the recording, play may not be possible.
31
How many times can I write to a
DVD-RAM disc?
You can write to the disc approximately 100,000 times depending upon the conditions of
use.
Can I record digital audio signals
using this unit?
You cannot record digital signals. The digital audio terminals on this unit are for output
only.
Can a digital audio signal from this
unit be recorded to other
equipment?
You can record if using the PCM signal. When recording DVD, change the “Digital Audio
Output” settings to the following from the SETUP menu.
-
PCM Down Conversion “ON”
-
Dolby Digital “PCM”
-
DTS “PCM”
However, only
-
As long as digital recording from the disc is permitted.
-
As long as the recording equipment is compatible with a sampling frequency of 48 kHz.
You cannot record MP3 signals.
44
Can I switch to MTS during
recording?
With DVD-RAM, you can, and the audio recorded also changes. Just press [AUDIO].
With DVD-R, you cannot. Change before recording with the “Select MTS” in the SETUP
menu.
27
44
VHSDVD
PP-Sample.book 64 ページ 2004年3月8日 月曜日 午後6時3分
Helpful Hints
65
On the unit’s display Page
On the TV Page
On the unit’s display Page
On the TV Page
Error messages
Common
H, F
(“” stands for a number.)
An error has occurred. The number following “H” or “F” depends on the status of the
unit.
Reset procedure:
Press [POWER Í/I] to switch the unit to standby mode and then back to ON.
Alternatively, press [POWER Í/I] to switch the unit to standby mode, disconnect the
AC power supply cord, and then reconnect it.
If the service numbers fail to clear, note the service numbers and contact a qualified
service person.
DVD
Cannot finish recording completely. The program was copy-guarded.
The disc may be full.
Cannot play. You inserted an incompatible disc (Discs recorded in PAL video, etc.).
Cannot record on the disc. The disc may be dirty or scratched.
19Unable to format.
Please check the disc.
Cannot record. Disc is full. Create space by erasing any unwanted titles. [RAM]
Use a new disc. [RAM] [DVD-R]
23, 33, 37
Cannot record. Maximum number
of titles exceeded.
Error has occurred. Please press
ENTER.
Press [ENTER] to start recovery process. You cannot operate the unit while it is
recovering (“SLF CHECK” appears on the unit’s display).
No disc. You haven’t inserted a disc. Correctly insert a disc that this unit can play.
The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.
18, 20
20
Please change the disc. There may be a problem with the disc. Press [<, OPEN/CLOSE] to remove it and
check it for scratches or dirt. (The unit turns off automatically after you open the tray.)
19
This is a non-recordable disc. The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized
DVD-R.
You inserted an unformatted DVD-RAM. Format the disc with this unit.
31
This disc is not formatted properly.
The operation is prohibited by the unit or disc.
21
CHK REMOTE
(“” stands for a number.)
The remote control and main unit are using different codes. Change the code on the
remote control or main unit.
17
HARD ERR If there is no change after turning the unit on and off, consult the dealer where the unit
was purchased.
NO READ The disc is dirty or badly scratched. The unit cannot record, play, or edit.
You have used a DVD-RAM/PD lens cleaner and it has finished. Press [<,OPEN/
CLOSE] to eject the disc.
19
19
PROG FULL There are already 16 timer programs. Delete unnecessary timer programs. 29, 53
SLF CHECK There was a power failure or the AC plug was disconnected while the unit was on. The
unit is carrying out its recovery process. Wait until the message disappears.
UNSUPPORT You have inserted a disc the unit cannot play or record on. 19
U14 The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until the
message disappears.
Select a position with good ventilation when installing the unit. Do not block the cooling
fan on the rear of the unit.
U99 The unit fails to operate properly. Press [POWER Í/I] on the main unit to switch the
unit to standby. Now press [POWER Í/I] again to turn the unit on.
VHS
PLEASE PUT IN A VIDEO
CASSETTE.
A video cassette is not inserted when recording programs or setting the timer
recording. Insert a video cassette with an intact erasure prevention tab.
48
PLEASE SET THE CLOCK The clock is not set when recording programs or setting the timer recording. Set the
clock.
46
PLEASE USE A CASSETTE WITH
TAB.
A video cassette without the intact erasure prevention tab is inserted when recording
programs or setting the timer recording. Use a video cassette with an intact erasure
prevention tab.
48
VHSDVD
PP-Sample.book 65 ページ 2004年3月8日 月曜日 午後6時3分
Helpful Hints
66
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the
chart do not solve the problem, refer to the “Customer Services Directory” on page 71 if you reside in the U.S.A., or refer to “Product
information” on page 70 if you reside in Canada. In other areas, consult your dealer.
Power Page
Displays Page
Operation Page
Troubleshooting guide
The following do not indicate a problem with this unit:
Regular disc rotating sound. The sound of the disc rotating may become louder especially when finalizing a DVD-R.
Poor reception due to atmospheric condition.
Image disturbance during search.
Interruptions to reception due to periodic satellite broadcasting breaks.
Common
No power Insert the AC power supply cord securely into a known active AC outlet. 10
The unit switches to the
standby mode.
This is a power saving feature. Change “Off Timer” in the SETUP menu, if you would prefer.
One of the unit’s safety devices is activated. Press [POWER Í/I] on the main unit to turn the
unit on.
43
The display is dim. Change “Front Display” in the SETUP menu. 45
“12:00” is flashing on the unit’s
display.
Set the clock.
46
The recording time display, the
transfer (dubbing) process
display and the displayed
recording time of MP3 are
different from the actual time.
The time on the unit’s display and the remaining recording time on the screen may be
indicated less or more than the actual value.
In DVD-R, the remaining capacity does not increase even if programs are erased.
If you repeat recording or editing 200 times or more, the remaining capacity of the DVD-R is
reduced and then recording or editing may be disabled.
The time during fast forward and rewind, or the process during transfer (dubbing) may not be
displayed accurately.
Compared to the actual
recorded time, the remaining
time displayed is less.
The displayed recording/play time is converted from the number of frames at 29.97 frames
(equal to 0.999 seconds) to one second. There will be a slight difference between the time
displayed and the actual elapsed time (e.g., actual one-hour elapsed time may display as
approximately 59 minutes 56 seconds). This does not affect the recording.
The tape counter isn’t
changing.
The tape counter does not change while playing unrecorded parts.
The display also appears like this if the tape is dirty or damaged. Consult your dealer if this is
the case.
Cannot operate the TV. Change manufacturer code. Some TVs cannot be operated even if you change the code.
Press [TV/VIDEO] to change the input mode to “TV”.
17
25, 51
Cannot operate the DVD. Press [DVD] when operating DVD. 6
Cannot operate the VHS. Press [VHS] when operating VHS. 6
The remote control doesn’t
work.
The remote control code is wrong. Change to the correct code.
The batteries are depleted. Replace them with new ones.
Point the remote control at the remote control sensor on the main unit.
Remove obstacles between the remote control and main unit.
If you repeatedly insert discs or turn this unit on and off 50 times or more, the recording or
editing of DVD-R may be disabled.
17
7
7
The unit is on but cannot be
operated.
Recording drive or playback drive have not been selected properly.
Some operations may be prohibited by the disc.
The unit is hot (“U14” appears on the display). Wait until “U14” disappears.
One of the unit’s safety devices may have been activated.
Reset the unit as follows:
(1) Press [POWER Í/I] on the main unit to switch to standby.
If the unit doesn’t switch to standby, press and hold [POWER Í/I] on the main unit for
about 10 seconds. The unit is forcibly switched to standby.
Alternatively, disconnect the AC power supply cord, wait 1 minute, then reconnect it.
(2) Press [POWER Í/I] to turn the unit on.
Cannot eject a disc. The unit may have a problem. While the unit is off, hold down [, STOP] and [CH, W] on the
main unit simultaneously for about 5 seconds. Remove the disc and consult the dealer.
VHSDVD
PP-Sample.book 66 ページ 2004年3月8日 月曜日 午後6時3分
Helpful Hints
67
Picture Page
Recording, Timer recording, Transfer (dubbing), External input Page
TV reception worsens after
connecting the unit.
This can occur because the signals are being divided between the unit and other equipment.
It can be solved by using a signal booster, available from audio-visual suppliers.
The images from this unit do
not appear on the TV.
Picture is distorted.
Make sure that the TV is connected to the VIDEO OUT terminal, S-VIDEO OUT terminal or
COMPONENT VIDEO OUT terminals on this unit.
Make sure that the TV’s input setting (e.g., VIDEO 1) is correct.
The TV isn’t compatible with progressive signals. Press and hold [, STOP] and
[ DVD, DUBBING] on DVD of the main unit at the same time for about 5 seconds. The
setting will change to interlace.
10
Timer recording does not work
properly.
VCR Plus_ system does not
work properly.
When connected to cable TV box or satellite receiver, the VCR Plus_ system does not work.
The timer program is incorrect or different timer program times overlap. Correct the program.
The clock is not correct. Set the clock.
Correct the guide channels with “VCR Plus_ CH Setting” in the SETUP menu.
The same guide channel is set to 2 or more channel positions. Set the guide channel correctly
or delete unnecessary channels.
Timer recording will not be activated during formatting, transfer (dubbing) and other such
operations which should not be interrupted when they are being carried out.
29, 53
46
15
15
Timer recording does not stop
even when [, STOP] is
pressed.
Press [, STOP] and then [ENTER] within 5 seconds to turn “ ” off. Recording stops.
29, 52
The timer program remains
even after recording finishes.
The timer program remains if set to daily or weekly.
28, 52
Cannot transfer (dub) VHS to a
disc.
“TP” channel is not selected when recording from a video tape to a disc.
Some video tapes on the market (including rental videos) are copy-guarded to prevent illegal
reproductions. Copy-guarded video tapes cannot be properly recorded.
59
Cannot record video or sound
from a disc.
“DC” channel is not selected when recording from a disc to a video tape.
Most DVDs on the market (including rental DVDs) are copy-guarded to prevent illegal
reproductions. Copy-guarded DVDs cannot be properly recorded.
61
The sound level after editing is
not equal on DVD and on VHS.
The sound level on DVD and VHS may not match depending on the disc. When the sound
level in a particular part of the sound source is soft or loud, the sound may be recorded loudly
or softly on a video tape.
Strip-shaped black noise is
recorded.
The device in playback is interfered with by the TV because the device is too close to the TV.
Move the device away from the TV.
Cannot record video or sound
from the external device.
The external device is not correctly connected.
The proper external input channel (L1 or L2) is not selected.
62
62
VHSDVD
PP-Sample.book 67 ページ 2004年3月8日 月曜日 午後6時3分
Helpful Hints
68
DVD Picture Page
DVD Sound Page
DVD Play Page
DVD
Status messages do not
appear.
Select “Automatic” in “Status Messages” in the SETUP menu.
45
The blue background does not
appear.
Select “On” in “Blue Background” in the SETUP menu.
45
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
Use the TV to change the aspect. If your TV does not have that function, set “Progressive” in
the Video menu to “OFF”.
Check the settings for “TV Type”, “4:3 TV Settings for DVD-Video” or “4:3 TV Settings for
DVD-RAM” in the SETUP menu.
41
45
There is a lot of after-image
when playing video.
Set “MPEG-DNR” in the Video menu to “OFF”.
41
When playing DVD-Video using
progressive output, one part of
the picture momentarily
appears to be doubled up.
Set “Progressive” in the Video menu to “OFF”. This problem is caused by the editing method
or material used on DVD-Video, but should be corrected if you use interlace output.
41
There is no apparent change in
picture quality when adjusted
with the Video menu in the on-
screen menus.
The effect is less perceivable with some types of video.
41
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio
type.
Check the connections and settings. Check the input mode on the amplifier if you have
connected one.
Press [AUDIO] to select the audio.
Turn off V.S.S. in the following cases.
-
When using discs that do not have surround sound effects such as Karaoke discs.
-
When playing MTS broadcast programs.
10–12,
44
23, 27
41
Cannot switch audio. You cannot change the audio type when a DVD-R is in the disc tray.
You cannot change the audio type when playing a DVD-R. (You can select “Main” or “SAP” in
“Select MTS” in the SETUP menu before recording.)
You have used a digital connection. Set “Dolby Digital” to “PCM” or connect using audio
cables (analog connection).
There are discs which audio cannot be changed because of how the disc was created.
44
12, 44
Play fails to start even when
[1,PLAY] is pressed.
Play starts but then stops
immediately.
Insert the disc correctly with the label facing up.
You tried to play a blank DVD-RAM/DVD-R, or discs unplayable on this unit.
When recording to DVD-RAM using EP (8H) mode, play may not be possible on
DVD players that are compatible with DVD-RAM. In this case use EP (6H) mode.
20
19
43
DVD-Video is not played. Some DVD-Video cannot be played when you change the ratings level. 43
Alternative sound track and
subtitles cannot be selected.
The languages are not recorded on the disc.
You may have to use the disc’s own menus to select languages.
No subtitles. When progressive output is on, closed captions cannot be displayed.
Subtitles are not recorded on the disc.
Turn the Subtitles ON.
40
Angle cannot be changed. This function depends on software availability. Angles can only be changed during
scenes where different angles are recorded.
You have forgotten your ratings
password.
With the tray open, keep pressing [:/6] and [5/9] on the main unit
simultaneously for 5 or more seconds.
Quick View does not work. This does not work if the setting is “Off” in “Search Audio & PLAY t1.3”.
This does not work when audio is other than Dolby Digital.
This does not work when recording is in XP or FR mode.
44
The resume play function does not
work.
This function only works when “PB” is flashing in the unit’s display.
Memorized positions are canceled when the unit is turned off or when the tray is opened.
The memorized position on the play list is also canceled when the play list and title are
edited.
21
VHSDVD
PP-Sample.book 68 ページ 2004年3月8日 月曜日 午後6時3分
Helpful Hints
69
DVD Recording, timer recording Page
DVD Edit Page
VHS Picture Page
VHS Sound Page
VHS Play Page
VHS Recording, timer recording Page
Cannot record. You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the
unit can record onto.
The disc is unformatted. Format the disc. [RAM]
The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with “DISC
SETTING”.
Some programs have limitations on the number of times they can be recorded (CPRM).
The disc is full or nearly full. Erase unneeded titles or use another disc.
You cannot record on finalized DVD-R discs.
If you repeatedly insert discs or turn this unit on and off 50 times or more, the recording or
editing of DVD-R may be disabled.
The material you are trying to record is copy-guarded.
Timer recording will not be activated when in editing or transfer (dubbing). Timer recording will
begin after the editing/transfer (dubbing) is finished.
19
31
18, 30
18, 63
23, 33, 37
18
A part or whole of a recorded
title has been lost.
If the power shuts down or the plug is disconnected from the household AC outlet while
recording or editing, the program may be lost or the disc may become unusable.
#We cannot offer any guarantee regarding lost titles or discs. You will have to format the disc
([RAM]) or use a new disc.
Cannot format. The disc is dirty. Use a special cleaner and wipe clean.
You tried formatting a disc that is not compatible with this unit.
19
19
Cannot create chapters.
Cannot mark the start point
or the end point during
“Shorten” operation.
The unit writes the chapter division information to the disc when you turn it off or remove the
disc. The information is not written if there is an interruption in the power before this.
These operations are not possible with still pictures.
You cannot set points if they are too close to each other. You cannot set an end point before
a start point.
Cannot erase chapters. When the chapter is too short to erase, use “Combine Chapters” to make the chapter longer. 35
The available recording time
doesn’t increase even after
erasing recordings on the
disc.
Available recording space on the DVD-R does not increase even after erasing previously
recorded titles.
Cannot create a play list. You cannot select all the chapters at once in a title if the title also includes still pictures. Select
them individually.
VHS
OSD messages do not appear. Go to VHS MENU and select “ON” in “OSD”.
Press [STATUS] to show the on-screen messages constantly.
56
57
The blue back appears during
play.
You are playing a blank or poor quality part of the tape.
You can damage the unit if you play dirty or damaged tapes and this can cause the blue back
to appear. Consult your dealer.
Cannot hear the desired audio
type.
Press [AUDIO] to select the audio.
57
There is noise when playing a
video tape.
Adjust the tracking.
The tape is old or damaged.
50
Cannot play. Tapes recorded under a TV system other than NTSC (PAL, SECAM, etc.) cannot be played.
The playback screen flickers. The video head is dirty.
The tape is too old or damaged.
1” flashes when I try to start
recording.
Cannot record.
The erasure prevention tab has been removed. Cover the hole with adhesive tape.
48
Cannot record TV program. The desired channel is not selected. Select the desired TV program.
VHSDVD
PP-Sample.book 69 ページ 2004年3月8日 月曜日 午後6時3分
Helpful Hints
70
1. Damage requiring service — The unit should be serviced by qualified service personnel if:
(a)The AC power supply cord or AC adaptor has been damaged; or
(b)Objects or liquids have gotten into the unit; or
(c)The unit has been exposed to rain; or
(d)The unit does not operate normally or exhibits a marked change in performance; or
(e)The unit has been dropped or the cabinet damaged.
2. Servicing — Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized
servicing personnel.
3. Replacement parts — When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the
same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4. Safety check — After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.
For product information or assistance with product operation:
In the U.S.A., refer to “Customer Services Directory” on page 71.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or an
authorized Servicentre closest to you.
User memo:
Product Service
Product information
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for future
reference.
MODEL NUMBER DMR-E75V
SERIAL NUMBER
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
VHSDVD
PP-Sample.book 70 ページ 2004年3月8日 月曜日 午後6時3分
Helpful Hints
71
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094
Panasonic Sales Company, Division of Matsushita Electric
of Puerto Rico, Inc.,
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Panasonic DVD Recorder
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively
referred to as “the warrantor”) will, for the length of the period indicated on the chart below,
which starts with the date of original purchase (“warranty period”), at its option either (a)
repair your product with new or refurbished parts, or (b) replace it with a new or a
refurbished product. The decision to repair or replace will be made by the warrantor.
During the “Labor” warranty period there will be no charge for labor. During the “Parts”
warranty period, there will be no charge for parts. You must carry-in or mail-in your product
during the warranty period. If non-rechargeable batteries are included, they are not
warranted. This warranty only applies to products purchased and serviced in the United
States or Puerto Rico. This warranty is extended only to the original purchaser of a new
product which was not sold “as is”. A purchase receipt or other proof of the original purchase
date is required for warranty service.
Carry-In or Mail-In Service
For Carry-In or Mail-In Service in the United States call 1-800-211-PANA (7262) or visit
Panasonic Web Site: http://www.panasonic.com
For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax
(787)-768-2910.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and
DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES
NOT COVER damages which occurred in shipment, or failures which are caused by
products not supplied by the warrantor, or failures which result from accidents, misuse,
abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, misadjustment of consumer controls, improper maintenance, power line surge,
lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or
other business), rental use of the product, service by anyone other than a Factory
Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS WARRANTY. (As examples, this excludes damages for lost time, travel
to and from the servicer, loss of media or images, data or other recorded
content. The items listed are not exclusive, but are for illustration only.) ALL
EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts,
so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state. If a problem with this product develops
during or after the warranty period, you may contact your dealer or Servicenter.
If the problem is not handled to your satisfaction, then write to the warrantor’s
Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY ARE YOUR RESPONSIBILITY.
F1003
Limited Warranty (ONLY FOR U.S.A.)
Product or Part Name Parts Labor
DVD Recorder One (1) Year One (1) Year
Rechargeable Batteries,
DVD-RAM Disc (in
exchange for defective
item)
Ten (10) Days Not Applicable
Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts
and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/support
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
For hearing or speech impaired TTY users, TTY : 1-877-833-8855
Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
http://www.pasc.panasonic.com
or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday – Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
For hearing or speech impaired TTY users, TTY : 1-866-605-1277
Service in Puerto Rico
Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company
Factory Servicenter:
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Phone (787)750-4300, Fax (787)768-2910
VHSDVD
PP-Sample.book 71 ページ 2004年3月8日 月曜日 午後6時3分
Helpful Hints
72
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC/TECHNICS PRODUCT—LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a
period as stated below from the date of original purchase.
Panasonic DVD Recorder One (1) year, parts and labour
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed, subjected to
usage for which the product was not designed, misused or abused, damaged during shipping, or which has been altered or repaired in any
way that affects the reliability or detracts from the performance, nor does it cover any product which is used commercially. Dry cell batteries
are also excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is required
before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, EXCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of
implied warranties, so the above limitations and exclusions may not be applicable.
WARRANTY SERVICE
For product operation and information assistance, please contact your Dealer or our Customer Care Centre at:
Telephone #: (905) 624-5505 Fax #: (905) 238-2360 Web: www.panasonic.ca
For product repairs, please contact one of the following:
Your Dealer who will inform you of an authorized Servicentre nearest you.
Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca
A Panasonic Factory Servicentre listed below:
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
Limited Warranty (ONLY FOR CANADA)
Richmond,
British Columbia
Calgary, Alberta Mississauga, Ontario Lachine, Québec
Panasonic Canada Inc.
12111 Riverside Way
Richmond, BC
V6W 1K8
Tel: (604) 278-4211
Fax: (604) 278-5627
Panasonic Canada Inc.
6835-8
th
St. N. E.
Calgary, AB
T2E 7H7
Tel: (403) 295-3955
Fax: (403) 274-5493
Panasonic Canada Inc.
5770 Ambler Dr.
Mississauga, ON
L4W 2T3
Tel: (905) 624-8447
Fax: (905) 238-2418
Panasonic Canada Inc.
3075, rue Louis A. Amos
Lachine, QC
H8T 1C4
Tel: (514) 633-8684
Fax: (514) 633-8020
VHSDVD
PP-Sample.book 72 ページ 2004年3月8日 月曜日 午後6時3分
Helpful Hints
73
Note
Mass and dimensions shown are approximate.
Specifications are subject to change without notice.
Specifications
Power Supply: AC 120 V ±10%, 50/60 Hz ±10%
Power Consumption: 32 W (Approx. 2 W in power save mode)
DVD
Recording format: DVD-RAM: DVD Video Recording format
DVD-R: DVD Video format
Audio: Dolby Digital 2 CH
Optical pickup System with 1 lens, 2 integration units
(wavelength: 658 nm for DVD, 795 nm for CD)
Recording disc: DVD-RAM: 12 cm (5q) 4.7 GB,
12 cm (5q) 9.4 GB,
8 cm (3q) 2.8 GB
DVD-R: 12 cm (5q) 4.7 GB, 8 cm (3q) 1.4 GB
(for General Ver. 2.0)
12 cm (5q) 4.7 GB
(for General Ver. 2.0/4k-SPEED
DVD-R Revision 1.0)
Recording mode/
recording time:
XP: approx. 10 Mbps/ approx. 60 min
SP: approx. 5 Mbps/ approx. 120 min
LP: approx. 2.5 Mbps/ approx. 240 min
EP: approx. 1.7/1.2 Mbps/approx. 360/480 min
(with 4.7 GB disc)
Playable discs: DVD-RAM: 12 cm (5q) 4.7 GB,
12 cm (5q) 9.4 GB,
8 cm (3q) 2.8 GB
DVD-R: 12 cm (5q) 4.7 GB, 8 cm (3q) 1.4 GB
(for General Ver. 2.0)
12 cm (5q) 4.7 GB
(for General Ver. 2.0/4k-SPEED
DVD-R Revision 1.0)
DVD-Video, DVD-Audio, Video CD,
CD-Audio (CD-DA), CD-R/RW (MP3, CD-DA,
Video CD formatted discs)
Video interface
Output:
RCA: CVBS: 1 Vp-p Zout: 75 ohm
S-Video: Y: 1 Vp-p, C: 0.286 Vp-p
Zout: 75 ohm
RCA (YP
BPR): Y: 1 Vp-p, PB: 0.7 Vp-p, PR: 0.7 Vp-p
Zout: 75 ohm
Audio interface
Input:
L1:
RCA: Standard: 309 mVrms, FS: 2 Vrms at 1 kHz
Zin: 22 k
L2:
RCA: Standard: 309 mVrms, FS: 2 Vrms at 1 kHz
Zin: 22 k
Output:
RCA: Standard: 309 mVrms, FS: 2 Vrms at 1 kHz
Zout: less than 1 k
Digital Audio: Optical Output connector
(PCM, Dolby Digital, DTS)
Video data:
Horizontal resolution: More than
XP: 500 lines SP: 400 lines
LP: 200 lines EP: 200 lines
Signal to Noise Ratio: More than 45 dB
Frequency Response: XP, SP: 0±3 dB at 4 MHz (0 dB at 0.1 MHz),
(Fine mode)
LP, EP: 0±3 dB at 2 MHz (0 dB at 0.1 MHz),
(Fine mode)
Audio data:
Dynamic Range: Rec/PB: more than 90 dB
DVD-Video PB (with LPCM): more than 99 dB
CD PB: more than 97 dB
Frequency Response: XP, SP, LP, EP (6H mode):
20 Hz–20 kHz (0±3 dB)
EP (8H mode): 20 Hz–12 kHz (0±3 dB)
Cross Talk: More than 60 dB at 1 kHz
LASER Specification
Class 1 LASER Product
Wave Length: 795 nm, 658 nm
Laser Power: No hazardous radiation is emitted with safety
protection
VHS
Recording format: VHS Video Cassette System Standard with FM
audio
Heads: 4 helical scan heads for video
2 helical scan heads for FM audio
1 fixed head for Normal audio
Recording modes/
recording time:
NTSC SP: 33.35 mm/s, 120 min
NTSC EP: 11.12 mm/s, 360 min
(with T-120 cassette)
others: FF/REW: approx. 54 s,
Jet REW: approx. 36 s (with T-120 cassette)
Audio interface
Input:
L1:
RCA: 309 mVrms Zin: 22 k
L2:
RCA: 309 mVrms Zin: 22 k
Video data:
Horizontal resolution: More than 200 lines
Signal to Noise Ratio: More than SP: 40 dB
EP: 40 dB
Frequency Response: SP, EP: -4.5–4.0 dB at 2 MHz (0 dB at 0.1 MHz)
Audio data:
Dynamic Range: HiFi: more than 90 dB
Frequency Response: HiFi: 20 Hz–20 kHz (0±3 dB)
Normal SP: 80 Hz–8 kHz (0±4 dB)
Normal EP: 80 Hz–4 kHz (-1±5 dB)
Signal to Noise Ratio: HiFi: more than 65 dB
Normal SP: more than 43 dB
Normal EP: more than 41 dB
Cross Talk: More than 50 dB at 1 kHz (HiFi)
Wow and Flutter: HiFi: less than 0.005%
Normal SP: 0.2% ma x
Normal EP: 0.4% ma x
DVD/VHS Common
Video interface:
TV system: NTSC
Input:
L1:
RCA: CVBS: 1 Vp-p Zin: 75 ohm
S-Video: Y: 1 Vp-p, C: 0.286 Vp-p
Zin: 75 ohm
L2:
RCA: CVBS: 1 Vp-p Zin: 75 ohm
S-Video: Y: 1 Vp-p, C: 0.286 Vp-p
Zin: 75 ohm
Output:
RCA: CVBS: 1 Vp-p Zout: 75 ohm
Audio interface:
Output:
RCA:
DVD: Standard: 309 mVrms, FS: 2 Vrms at 1 kHz
Zout: less than 1 k
VHS 309 mVrms Zout: less than 1 k
Tuner RF:
Tuner system/
Channel coverage:
NTSC-M
VHF: 2 ch–13 ch 75 ohm
UHF: 14 ch–69 ch 75 ohm
CATV: 5A & A-5 ch–EEE ch 75 ohm
One tuner (DVD and VCR common use)
RF converter: Not provided
Dimensions: Approx. 430 mm (W)k89 mm (H)k352 mm (D)
[Approx. 16
15
/
16
q (W)k3
1
/
2
q (H)k13
7
/
8
q (D)]
Mass: Approx. 5.8 kg (12.79 lbs.)
Operating Temperature: 5oC–40oC (41oF–104oF)
Operating Humidity: 35%80% RH (no condensation)
VHSDVD
PP-Sample.book 73 ページ 2004年3月8日 月曜日 午後6時3分
Helpful Hints
74
COMMON
Antenna System ............................................................................14
Channel
adding, deleting ..........................................................................14
audio (DVD) ................................................................................40
Auto Channel Setting..................................................................14
captions ......................................................................................16
guide channel VCR Plus_ system .............................................15
Cleaning
disc, lens, main unit ....................................................................19
video heads ................................................................................48
Clock setting ..................................................................................46
Connection
amplifier, system component ......................................................12
antenna.......................................................................................11
antenna, television.................................................................9
, 10
cable TV box/satellite receiver....................................................11
external device............................................................................62
TV Type .........................................................................................17
VCR Plus_ system
guide channel .............................................................................15
timer recording (DVD).................................................................28
timer recording (VHS) .................................................................52
DVD
Angle..............................................................................................40
Audio
attributes.....................................................................................40
playback......................................................................................23
receiving, recording ....................................................................27
Change Thumbnail ........................................................................34
Chasing play..................................................................................25
CM Skip .........................................................................................22
Copy (play list)...............................................................................38
CPRM system.........................................................................18
, 63
Create chapters .............................................................................23
Create play lists .............................................................................36
Dialog Enhancer ............................................................................41
Direct Navigator......................................................................33
, 54
Display menus ...............................................................................40
DVD-RAM, DVD-R.........................................................................18
Enter Name
disc .............................................................................................30
operation.....................................................................................32
play list........................................................................................38
title .......................................................................................28
, 34
Erase
chapter........................................................................................35
chapter in play list.......................................................................39
play list........................................................................................37
title .......................................................................................23
, 33
Finalize ...................................................................................31
, 63
Flexible Recording.........................................................................27
Format disc....................................................................................31
FUNCTIONS window.....................................................................47
Language
audio ...........................................................................................43
code list.......................................................................................45
on-screen....................................................................................45
sound track .................................................................................40
subtitle .................................................................................40
, 43
Manual Transfer (Dubbing)............................................................59
MP3 ...............................................................................................24
MPEG-DNR ...................................................................................41
One Touch Transfer (Dubbing)......................................................58
PCM Down Conversion .................................................................44
Picture............................................................................................ 41
Play list ..........................................................................................36
Progressive......................................................................17
, 41, 63
Properties
play list ....................................................................................... 37
title.............................................................................................. 33
Protection
cartridge ..................................................................................... 18
disc............................................................................................. 30
title.............................................................................................. 34
Quick View .................................................................................... 21
Ratings ................................................................................... 42
, 43
Re-initialize Settings...................................................................... 43
Recording modes .......................................................................... 27
Repeat play ................................................................................... 41
Resume function ........................................................................... 21
SETUP menu ................................................................................ 42
Shorten (titles)............................................................................... 34
Simultaneous recording and play .................................................. 25
Sound track ................................................................................... 40
Status displays .............................................................................. 47
Subtitle ................................................................................... 40
, 43
Time Slip ................................................................................ 23
, 25
Timer recording ............................................................................. 28
Transfer......................................................................................... 41
TV Type......................................................................................... 17
V.S.S. ............................................................................................ 41
VHS
Audio ............................................................................................. 57
Auto Bilingual Choice .................................................................... 57
Auto SP/EP mode ......................................................................... 53
Category........................................................................................ 55
Direct Navigator............................................................................. 54
Intact erasure prevention tab......................................................... 48
Jet Rewind..................................................................................... 49
Manual Transfer (Dubbing) ........................................................... 61
On-screen display ......................................................................... 57
One Touch Transfer (Dubbing) ..................................................... 60
Remaining tape time ..................................................................... 57
Repeat Playback ........................................................................... 50
SQPB ............................................................................................ 50
Time Stamp................................................................................... 55
Timer recording ............................................................................. 52
Tracking......................................................................................... 50
VHS menu..................................................................................... 56
VISS .............................................................................................. 55
VP mode........................................................................................ 51
Index
PP-Sample.book 74 ページ 2004年3月8日 月曜日 午後6時3分
75
Español
Antes de uso
Las conexiones del equipo descritas sirven en concepto de ejemplo.
Antes de conectar, apague todo equipo y lea las instrucciones correspondientes de funcionamiento.
Los equipos periféricos y los cables correspondientes y los cables opcionales se venden por separado si no está indicado de otro modo.
75 cable coaxial
La imagen y el sonido desde esta unidad no pasa a través del
cable coaxial 75 al televisor. Tenga cuidado de conectar uno de
los siguientes terminales en esta unidad al televisor: el terminal
AUDIO/VIDEO OUT, el terminal S-VIDEO OUT o el terminal
COMPONENT VIDEO OUT. Si el televisor no tiene ninguno de
estos terminales, consulte a su proveedor local.
Cuando la unidad no ha de ser usada durante un largo
tiempo
Para ahorrar energía, desenchúfela de la toma doméstica CA. Esta
unidad consuma una pequeña cantidad de corriente aun cuando
está apagada (aproximadamente 2 W).
No conecte la unidad a través de la grabadora del
cassette de vídeo
Las señales de vídeo alimentadas a través de las grabadoras de
cassette de vídeo se afectarán por los sistemas de protección de los
derechos de autor y la imagen no se verá correctamente en el televisor.
Cuando se conecte a un televisor teniendo un VCR incorporado,
conéctelo a los terminales de entrada por el lado del televisor y no
por el lado del VCR.
Conexión a un televisor o a un VCR
RF IN
RF OUT
VHF/UHF
R - AUDIO - L
VIDEO
S-VIDEO
IN 1 (L1)
OPTICAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COMPONENT VIDEO OUT
(480P/480I)
YPB PR
R - AUDIO - L
VIDEO
R - AUDIO - L
VIDEO
S-VIDEO
DVD OUT
DVD/VHS COMMON OUT
VHF/UHF
RF IN
VIDEO
OUT
VHF/UHF
RF IN
R L
AUDIO OUT
COMPONENT
VIDEO IN
S VIDEO IN
AUDIO IN
R L
VIDEO IN
4
3
2 1
14
A la
antena
Antena al aire
libre
Cable del
televisor
Antena interior
TV
Cable
Audio/
Vídeo
Cable de la
antena
A la toma doméstica CA
Grabadora de cassette de
vídeo
Ventilador de
refrigeración
Cable de vídeo
del
componente
75 cable coaxial
(l abajo)
Cable de alimentación CA
Sólo conecte después de terminar
todas las demás conexiones.
Esta unidad
75cable coaxial
Cable Audio/Vídeo
Partidor
indica los accesorios incluidos.
indica los accesorios no incluidos.
son conexiones necesarias. Conecte según el orden numérico.
Al L1
Cuando hace una conexión,
tenga cuidado de conectar en
el televisor los cables de audio
a los correspondientes
terminales de entrada audio.
Terminal COMPONENT VIDEO OUT
Estos terminales pueden ser usados para la salida sea entrelazada sea
progresiva y para proporcionar una imagen más nítida que el terminal de
S-VIDEO OUT.
Conecte a los terminales del mismo color.
Cable
S-Vídeo
Terminal S-VIDEO OUT
El terminal S-VIDEO OUT hace conseguir una imagen más nítida que el
terminal VIDEO OUT. (Los resultados reales dependen del televisor.)
Rojo
Blanco
Amarillo
Utilice un partidor si quiere
también conectar la antena a su
VCR.
TV TV
Esta unidad
VCR
VCR
Esta unidad
ESPAÑOL
PP-Sample.book 75 ページ 2004年3月8日 月曜日 午後6時3分
Antes de uso
76
[[DVD]]
Operaciones preliminares
Encienda el televisor y seleccione la entrada de vídeo
correspondiente para conformar las conexiones a esta unidad.
Si conecta la unidad a una caja de televisor de cable o a un
receptor de satélite, sintonice su PBS local para que funcione el
“Ajuste automático del reloj”.
Si no hay PBS local, ajuste el reloj manualmente (“Ajuste manual
del reloj”).
Pulse [DVD].
[1] Pulse [Í, DVD/VHS POWER].
[2] Utilice [3, 4] para seleccionar el idioma del
menú y oprima [ENTER].
[3] Oprima [ENTER] para iniciar la sintonización
automática por enchufe.
Luego, la unidad procede al ajuste automático del reloj. El
temporizador se visualiza cuando finaliza.
[4] Pulse [ENTER].
Si el reloj adelanta o atrasa una hora respecto a la hora
actual
[1] Mientras el disco está detenido, pulse [FUNCTIONS].
[2] Seleccione “SETUP” con [3, 4, 2, 1] y pulse [ENTER].
[3] Ajustej1” o “i1” en “Ajuste del huso horario” en el menú
“Configuración” usando [3, 4, 2, 1] y [ENTER].
[4] Pulse [RETURN] para salir.
Si la unidad no puede ajustar automáticamente el reloj
Pulse [ENTER] para visualizar la pantalla “Ajuste manual del reloj”.
Ajuste la hora manualmente.
Ajuste estos canales de guía de manera que se pueda usar el
sistema VCR Plusi para la grabación temporizada. Antes de
proceder a los ajustes, prepare el papel que muestra los canales, los
nombres de las estaciones y los canales de guía.
por ej.,
° Mire en los canales de guía para las estaciones en revistas.
°° Apunte todas las estaciones que puede recibir.
Si ha conectado una caja TV de cable o un receptor de satélite, el
sistema VCR Plus_ no funciona como no ha ajustado los canales
de la guía.
Operaciones preliminares
Pulse [DVD].
[1] Mientras el disco está detenido
Pulse [FUNCTIONS].
[2] Seleccione “SETUP” con [3, 4, 2, 1] y pulse
[ENTER].
[3] Seleccione “Canal” con [3, 4] y pulse [2, 1].
[4] Seleccione “VCR Plusr Ajuste canal” con
[3, 4], luego pulse [ENTER].
[5] Utilice [3, 4] para seleccionar el canal de guía
que quiere ajustar y pulse [1].
[6] Utilice [3, 4] para seleccionar el canal
correspondiente al de guía y pulse [2].
Para borrar un número, pulse [CANCEL/RESET, ¢].
Repita los pasos 5 y 6 para introducir otros canales.
[7] Pulse [ENTER].
No debe cambiar el ajuste cuando está conectado a un televisor que tiene
el aspecto estándar de 4:3 y no es compatible con la salida progresiva.
Operaciones preliminares
Pulse [DVD].
[1] Mientras el disco está detenido
Pulse [FUNCTIONS].
[2] Seleccione “SETUP” con [3, 4, 2, 1] y pulse
[ENTER].
[3] Seleccione “Pantalla TV” con [3, 4] y pulse
[2, 1].
[4]
Seleccione “Tipo TV” con [
3
,
4
] y pulse [ENTER].
Aspecto 4:3/Aspecto 16:9:
480P/480I:
Seleccione “480P” si el televisor es compatible con la salida
progresiva.
[5] Utilice [3, 4] para seleccionar el detalle, luego
pulse [ENTER].
Para volver a la pantalla anterior
Pulse [RETURN].
Para salir de la pantalla
Pulse [RETURN].
Sintonización automática por enchufe
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
POWER
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
VCR Plus+
OUTPUT
1
3, 4, 2, 1
ENTER
Í
DVD
6, 5
;
Teclas
numéricas
English
Español
Français
Press ENTER
Pulse ENTER
Appuyer sur ENTER
Select Language
Seleccione la Lengua
Sélection de Langue
Ajustes del canal de guía para el sistema
VCR Plus+
Nombre de
la estación
Canal
de guía°
Número
del
canal°°
Ajuste del canal
(En el paso 5)
CBS 04 04 Innecesario
HBO 33 15
Introduzca el canal 15
sucesivo al canal de guía 33.
Nickelodeon 38 20
Introduzca el canal 20
sucesivo al canal de guía 38.
Selección del tipo de televisor
4:3
16:9
Televisor de aspecto
estándar 4:3
Televisor de pantalla
panorámica 16:9
DVD
PP-Sample.book 76 ページ 2004年3月8日 月曜日 午後6時3分
77
Reproducción
[1] Pulse [<, OPEN/CLOSE] en la unidad principal
para abrir la bandeja.
Puede Ud. insertar un disco de cartucho o sin cartucho.
[2] Pulse [<OPEN/CLOSE] en la unidad principal
para cerrar la bandeja.
Al introducir un DVD-RAM con la lengüeta de protección de
escritura ajuste a “PROTECT (PROTEGER)”, la reproducción
comienza automáticamente.
Nota
Cargue los discos de dos caras de manera que la etiqueta de la
cara que quiere grabar/reproducir mire hacia arriba.
No es posible grabar continuamente de un lado de un disco de doble
cara al otro. Es necesario que se expulse el disco y se lo revuelva.
Cuando utiliza un DVD-RAM de 8 cm (3q), quite el disco del
cartucho e insértelo, teniendo cuidado de alinearlo con la ranura.
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
Operaciones preliminares
Pulse [DVD].
[1] Pulse [Í, DVD/VHS POWER] para encender la
unidad.
[2] Inserte un disco.
(l arriba)
[3] Pulse [1, PLAY].
La bandeja se cierra y comienza la reproducción.
(La unidad emplea un tiempo para la adquisición de los datos
del disco antes de comenzar la reproducción.)
La reproducción inicia desde el último título grabado.
[RAM] [DVD-R]
La reproducción inicia a partir del comienzo del disco.
[DVD-A] [DVD-V] [VCD] [CD] [MP3]
Para detener la reproducción
Pulse [, STOP]. (lderecha, “Función
Resume”)
Cuando se detiene la reproducción es
posible que aparezca una pantalla como a
la derecha. Pulsando otra vez [, STOP]
es posible utilizar el sintonizador de la
unidad para ver la televisión.
[DVD-A] [DVD-V] [VCD] [CD] [MP3]
Para interrumpir provisionalmente la reproducción
Pulse [;, PAUSE]. (Pulse nuevamente la tecla para reanudar la
reproducción.)
[VCD]
Pulse las teclas numéricas para seleccionar un detalle.
por ej.: “5”: [0] )[5]
“15”: [1] )[5]
[DVD-A] [DVD-V]
Pulse [3, 4, 2, 1] para seleccionar un detalle, luego pulse
[ENTER].
Para seleccionar un detalle es posible también utilizar las teclas
numéricas.
Otros botones usados para hacer funcionar los menús
Lea las instrucciones del disco para más información acerca del
funcionamiento.
Nota
Si aparece “ ” en el televisor, la unidad o el disco prohiben la
operación.
[RAM] (Solo con Dolby Digital)
Puede ser aumentada la velocidad de
reproducción sin distorsionar el audio.
Durante la reproducción
Pulse y mantenga [1, PLAY].
Para volver a la velocidad normal
Pulse [1, PLAY].
[RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]
[1] Durante la reproducción
Pulse [, STOP].
“PB” destella en el
visualizador de la unidad
(solo reproducción
normal). La unidad
memoriza la posición.
[2] Pulse [1, PLAY].
La reproducción vuelve a comenzar de donde se interrumpió.
Para cancelar la función de reanudación
(solo reproducción normal)
Pulse [, STOP] mientras la unidad recuerda la
posición.
(La posición se borra también cuando se apaga
la unidad.)
[RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]
Durante la reproducción
Pulse [6, SLOW/SEARCH] o
[5, SLOW/SEARCH].
En la unidad principal, mantenga pulsado [:/6] o [5/9].
Hay 5 velocidades de búsqueda. Cada vez que se pulsa la tecla la
velocidad de búsqueda aumenta.
Pulse [1, PLAY] para volver a iniciar la reproducción.
[RAM] [DVD-R] [DVD-A]
(Sólo partes de imagen en movimiento)
[DVD-V] [VCD]
Durante la pausa
Pulse [
6
, SLOW/SEARCH] o [
5
, SLOW/SEARCH].
En la unidad principal, mantenga pulsado [:/6] o [5/9].
Cuando la reproducción de movimiento lenta dura más de
5 minutos, se detiene automáticamente.
La velocidad aumenta hasta 5 pasos.
Pulse [1, PLAY] para volver a iniciar la reproducción.
Sólo dirección en avance ([5], [5/9]). [VCD]
Introducción de discos
(2)
(3)
(1)
Disco sin cartucho
Disco de cartucho
(1) Inserte etiqueta arriba.
(2) Insertar el disco en la parte inferior de las guías de la bandeja.
(3) Insertar el disco con la etiqueta hacia arriba y la flecha hacia
el interior.
Reproducción de los discos
Cuando en el televisor aparece la pantalla
de un menú
Vista rápida (Reproducción t1.3)
Continuación de la reproducción
(Función Resume)
Avance rápido y rebobinado—SEARCH
Reproducción de cámara lenta
REPR.
DVD-RAM
REPR. x1.3
DVD-RAM
por ejemplo:
Reproducción
normal
L R
t2
DVD-RAM
••••
DVD
PP-Sample.book 77 ページ 2004年3月8日 月曜日 午後6時3分
Reproducción
78
[RAM] [DVD-R] [DVD-A]
(Sólo partes de imagen en movimiento)
[DVD-V] [VCD]
Durante la pausa
Pulse [2;], [;1], [2] o [1].
Cada vez que se pulsa aparece el cuadro siguiente o el anterior.
Pulse [1, PLAY] para volver a iniciar la reproducción.
Solo dirección en avance ([;1], [1]). [VCD]
[RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]
Durante la reproducción o la pausa
Pulse [:, SKIP] o [9, SKIP].
En la unidad principal, pulse [:/6] o [5/9].
Cada presión hace aumentar el número de saltos.
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
Inicio de la reproducción desde un título, capítulo o una pista
seleccionados.
Durante la reproducción
Pulse las teclas numéricas para seleccionar el
detalle.
por ej.: “5”: [0] )[5] [MP3] “5”: [0] )[0] )[5]
“15”: [1] )[5] “15”: [0] )[1] )[5]
[DVD-A]
Mientras que está visualizado el salva
pantalla puede ser especificado un número
de grupo.
por ej.: “5”: [5]
Éste sólo funciona cuando está parada
(está visualizado el salva pantalla) con
algunos discos.
Reproducir grupos adicionales
Unos discos contienen grupos adicionales. Si aparece una pantalla
de contraseña después de seleccionar un grupo, introduzca la
contraseña con los botones numéricos, luego pulse [ENTER]. Se
refiera también a la envoltura del disco.
[RAM] [DVD-R]
Puede saltar por cerca de 1 minuto por cada vez que se pulsa.
Durante la reproducción
Pulse [CM SKIP].
[RAM] [DVD-R]
Salta al tiempo especificado.
Visualiza la imagen TV a ser recibida como imagen en imagen.
[1] Durante la reproducción
Pulse [TIME SLIP]. (Vuelva a pulsar para suprimir.)
Escuchará el audio de la reproducción.
El fondo azul no aparece en la pantalla de recepción.
[2] Pulse [3, 4] para introducir el tiempo y pulse
[ENTER].
El indicador del tiempo se apagará después de 5 segundos
aproximadamente, pero ajustando de nuevo el indicador
volverá a encenderse.
La reproducción saltará el tiempo especificado.
Pulse para cambiar por unidades de 1 minuto. Pulse y
mantenga pulsado para cambiar por unidades de 10 minutos.
(1)Imágenes reproducidas
(2)Imágenes actuales en recepción
Puede cambiar el canal a ser recibido pulsando [CH, W, X].
No puede cambiar el canal a ser recibido mientras va
grabando.
Para visualizar completamente las imágenes de
reproducción
Pulse [TIME SLIP].
[RAM] [DVD-R]
Puede borrar los títulos mientras va reproduciendo.
Una vez borrado el título no puede ser restablecido. Asegúrese
antes de proceder.
[1] Durante la
reproducción
Pulse
[DVD ERASE].
[2] Seleccione
“Borrar” con [2]
y pulse [ENTER].
[RAM]
[1] Durante la reproducción
Pulse [CHAPTER].
Pulse [:, SKIP] o [9, SKIP] para saltar al comienzo del
capítulo.
No puede activar esta función cuando graba y reproduce al
mismo tiempo.
Operaciones preliminares
Pulse [DVD].
Visión cuadro por cuadro
Salto
Reproducción directa
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
POWER
TIME SLIP
CHAPTER
JET REW
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
DVD ERASE
VCR Plus+
OUTPUT
1
3, 4, 2, 1
2;, ;1
ENTER
Í
DVD
CM SKIP
TIME SLIP
CHAPTER
DVD ERASE
6, 5
:, 9
;
DIRECT NAVIGATOR
TV/VIDEO
CH, W, X
CH, W, X
REC MODE
µ
Teclas
numéricas
Salva pantalla
Salto CM
Visualización de la imagen TV como
imagen en imagen/
Selección de la cantidad de tiempo a
saltar—Time Slip
Borrado de un título que se está
reproduciendo
Crear capítulos
0 min
–5 min
(1)
(2)
REPR.
Canal8
REPR.
Canal8
Borrar
Borrar Cancelar
0 : 58(SP)
Se borrará el respectivo capítulo
de la LISTA DE REPRODUCCION.
Tiempo grabación restante
DVD
PP-Sample.book 78 ページ 2004年3月8日 月曜日 午後6時3分
79
Grabación
[RAM]
Operaciones preliminares
Pulse [DVD].
Sugerencia
El sonido no funciona durante el avance rápido.
Es posible empezar la reproducción desde el comienzo de un título
mientras lo sigue grabando.
Durante la grabación o la grabación temporizada
Pulse [1, PLAY].
Se enciende el indicador Time Slip en la unidad principal.
Es posible comenzar la reproducción del título que se está grabando
o reproducir un título grabado anteriormente.
Durante la grabación o la grabación temporizada
[1] Pulse [DIRECT NAVIGATOR].
[2] Utilice [3, 4, 2, 1] para seleccionar el título,
luego pulse [ENTER].
Se enciende el indicador Time Slip en la unidad principal.
Para salir de la visión del título, pulse [DIRECT NAVIGATOR].
Es posible reproducir el título que se está grabando para controlar
su correcta grabación. Es también posible controlar las partes
grabadas anteriormente.
Durante la grabación o la grabación temporizada
[1] Pulse [TIME SLIP].
[2] Pulse [3, 4] para seleccionar el tiempo, luego
pulse [ENTER].
El indicador del tiempo se apagará después de 5 segundos
aproximadamente, pero ajustando de nuevo el indicador
volverá a encenderse.
Pulse [
3
,
4
] para cambiar por unidades de 1 minuto. Pulse y
mantenga pulsado [
3
,
4
] para cambiar por unidades de 10 minutos.
Para visualizar completamente las imágenes de
reproducción
Pulse [TIME SLIP].
Pulse [TIME SLIP] para volver a la pantalla de imagen a imagen.
Referencia
Según la escena, la imagen de la pantalla pequeña puede resultar
distorsionada o bien parpadear. Sin embargo, esto no afecta la
imagen grabada.
[1] Pulse [TV/VIDEO] para cambiar el modo de
entrada en “TV”.
[2] Pulse [CH, W, X] del televisor para seleccionar
los canales TV deseados.
Referencia
Es posible hacerlo también si la unidad está efectuando una
grabación temporizada.
La grabación no se ve afectada.
[RAM] [DVD-R]
Puede grabar hasta 99 títulos en un disco.
DVD-RAM/DVD-R tiene restricciones en la grabación.
La grabación tendrá lugar en un espacio abierto en el disco duro o
en el disco. Los datos no se sobrescribirán.
Si no se deja espacio en el disco de grabación, será menester que
se borren los títulos innecesarios (
l 78
) o se utilice un nuevo disco.
Operaciones preliminares
Quite la protección. [RAM]
Pulse [DVD].
[1]
Pulse [
Í
, DVD/VHS POWER] para encender la unidad.
[2] Inserte un disco. (l 77)
Cuando con esta unidad utiliza un DVD-RAM por la primera
vez, formatéelo para garantizar una esmerada grabación.
[3] Pulse [CH, W, X] para seleccionar el canal.
Para seleccionar con las teclas numéricas:
Modo TV (Ondas hertzianas)
por ej., “5”: [0] )[5]
“15”: [1] )[5]
Modo CATV (Cable)
por ej., “5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
“115”: [1] )[1] )[5]
[4] Pulse [REC MODE] para seleccionar el modo de
grabación.
[5] Pulse [¥, DVD REC] para iniciar la grabación.
No es posible cambiar de canal o el modo durante la grabación.
Es posible cambiarlos cuando la grabación se encuentra en
pausa, pero el material se grabará como un título separado.
Para detener temporalmente la grabación
Pulse [
;
, PAUSE]. (Pulse nuevamente la tecla para reanudar la grabación.)
El título no puede dividirse en un título separado.
Para detener la grabación
Pulse [, STOP].
Grabado como 1 título hasta donde se detiene la posición.
Después de terminar la grabación, el DVD-R lleva más o menos 30
segundos para que la unidad finalice su información de gestión.
Para especificar un tiempo para detener la grabación
Durante la grabación
Pulse [
¥
, DVD REC] para seleccionar el tiempo de grabación.
En la unidad principal, pulse [¥, REC].
Visualización de la unidad
Cada vez que pulsa la tecla:
Contador (suprimir) # 0:30 # 1:00 # 1:30
^------- 4:00 ! 3:00 ! 2:00 !--------}
Según el contenido a ser grabado, los tiempos de grabación pueden
salir más cortos que los señalados.
(Unidad: hora)
° Cuando en el menú SETUP se ha ajustado a “EP (6H)” el “Tiempo
de grab. en el modo EP”.
La calidad del sonido se baja, en comparación con otros modos
de grabación, cuando se usa “EP (8H)”.
Nota
Cuando se graba en DVD-RAM usando el modo EP (8H), la
reproducción puede no ser posible en unidades DVD que sean
compatibles con DVD-RAM. En este caso utilice el modo EP (6H).
Reproducción durante la grabación
Reproducción seguida
Grabación y reproducción simultáneas
TIME SLIP
Para detener la reproducción y la grabación
[1] Pulse [, STOP]. La reproducción se detiene.
(Espere 2 segundos o más)
[2] Pulse [, STOP]. La grabación se detiene.
No es posible detener la grabación con [
, STOP] durante la
grabación temporizada. Para detener la grabación temporizada
pulse [
, STOP], luego [ENTER] dentro de 5 segundos.
- Puede también seguir pulsando [
] en la unidad principal durante
más de 3 segundos para detener la grabación temporizada.
Recepción de las transmisiones
televisivas durante la grabación
Grabación de programas televisivos
Modos de grabación y tiempo aproximado
de grabación
DVD-RAM
DVD-R
(4,7 GB)
De un solo lado
(4,7 GB)
Doble lado
(9,4 GB)
XP (Alta calidad) 1 2 1
SP (Normal) 2 4 2
LP (Larga duración) 4 8 4
EP (Reproducción de
muy larga duración)
8 (6°) 16 (12°)8 (6°)
DVD
PP-Sample.book 79 ページ 2004年3月8日 月曜日 午後6時3分
80
Ejecución de grabaciones temporizadas
[RAM] [DVD-R]
Puede introducir hasta 16 programas con un adelanto de un mes.
Operaciones preliminares
Quite la protección. [RAM]
Inserte un disco (l 77) y asegúrese de que haya bastante espacio
vacío para grabarle encima.
Pulse [DVD].
[1] Pulse [VCR Plus_].
[2] Pulse las teclas numéricas para introducir el
número PlusCode
.
Pulse [2] para volver a la cifra correcta.
[3] Pulse [ENTER].
Cerciórese del programa y, si lo necesita, corrija usando [3, 4,
2, 1]. (l abajo, paso 3)
[4] Si el programa es correcto
Pulse [ENTER].
” se enciende en el visualizador de la unidad.
Repita los pasos 1–4 para programar otras grabaciones.
[5] Pulse [RETURN].
[1] Pulse [PROG/CHECK].
Cerciórese de que esté seleccionado “Nuevo programa”.
[2] Pulse [ENTER].
[3] Utilice [1] para desplazar y cambiar los detalles
con [3, 4].
Pueden usarse las teclas numéricas para introducir “CANAL”,
“FECHA”, “ACT” y “DES”.
CANAL (Posición del programa/Nombre de la estación de TV)
FECHA
Puede crear usted un programa diario o semanal.
Todos los programas diarios o semanales se cuentan como un
solo programa.
ACT (hora de encendido)/DES (hora final)
Si mantiene pulsado el botón, el tiempo aumentará o
disminuirá en incrementos de 30 minutos.
MODO (Modo de grabación)
Para cambiar el modo de grabación, puede pulsar también
[REC MODE].
XP,.SP,.LP,.EP,.FR,.XP... (l 79)
Intr.ir nomb.
Pulse [2, 1] para seleccionar “Intr.ir nomb.” luego pulse
[ENTER].
[4] Al terminar las correcciones pulse [ENTER].
” se enciende en el visualizador de la unidad.
Para continuar programando:
Seleccione “Nuevo programa” y repita los pasos 2–4.
[5] Pulse [RETURN].
Para detener la grabación mientras un programa está
trabajando
Pulse [, STOP], luego [ENTER] dentro de 5 segundos.
Puede también seguir pulsando [] en la unidad principal durante
más de 3 segundos para detener la grabación.
[1] Pulse [PROG/CHECK].
[2] Pulse [3, 4] para seleccionar el programa.
Puede seleccionarse el programa introduciendo un número de
2 cifras utilizando las teclas numéricas.
por ej.: “5”: [0] )[5]
“15”: [1] )[5]
Utilice [2, 1] para desplazarse a la página que antecede o
sigue la visualizada.
[3] Pulse [CANCEL/RESET, ¢] para eliminar,
No es posible eliminar programas en fase de grabación.
o pulse [ENTER] para cambiar.
Se visualiza la pantalla de ajuste de la grabación temporizada.
[4] Si pulsa [ENTER] en el paso 3,
Utilice [3, 4, 2, 1] para cambiar luego pulse
[ENTER].
[5] Pulse [RETURN].
Referencia
Los programas cuya grabación no tuvo éxito no se borran
inmediatamente de la lista (destacados en gris), pero se borran
automáticamente a las 4 de la mañana dos día después.
Durante la grabación temporizada puede cambiar el tiempo final
mientras el modo de grabación no es “FR”.
La grabación temporizada de programas TV no puede ejecutarse en
DVD y VHS conjuntamente.
Verifique si el tiempo inicial de la grabación temporizada no se
superpone en la pantalla de programación temporizada tanto del
DVD (l arriba) como del VHS (l 83).
Cuando se superponen los ajustes de la grabación temporizada:
Cuando el tiempo inicial de las dos grabaciones temporizadas es el
mismo, la del DVD tiene la prioridad.
Cuando están especificados los canales del sintonizador en la
grabación temporizada tanto en el VHS como en el DVD, sólo
podrá tener comienzo una grabación temporizada.
Cuando el intervalo entre la primera grabación temporizada y la
segunda en el DVD es de 1 minuto o menos como señalado a
continuación, la segunda grabación temporizada en el DVD tiene la
prioridad sobre la en el VHS aunque su tiempo inicial sea posterior
a la grabación temporizada del VHS.
Precauciones en la grabación temporizada
Cuando llega el tiempo que se definió, la grabación temporizada
inicia automáticamente.
La grabación temporizada puede iniciar mientras la unidad está
tanto apagada como encendida. Cuando la unidad está
apagada, el sonido y el vídeo no salen en el televisor.
Uso del sistema VCR Plus+
Programación manual
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
POWER
TIME SLIP
CHAPTER
JET REW
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
DVD ERASE
VCR Plus+
OUTPUT
1
3, 4, 2, 1
ENTER
Í
DVD
VCR Plusi
RETURN
REC MODE
PROG/CHECK
;
6
JET REW
VHS
6, 5
Teclas
numéricas
Controle, cambie o borre el programa
Precauciones al usar la grabación
temporizada en DVD y VHS
1 minuto
4 CANAL
10 CANAL
2 CANAL
VHS
DVD
DVD
PP-Sample.book 80 ページ 2004年3月8日 月曜日 午後6時3分
81
[[VHS]]
Reproducción
Poniendo hacia arriba la superficie desde la que puede ver el rollo de la
cinta,
Inserte un cassette de vídeo.
Esta unidad se enciende automáticamente.
Para expulsar el cassette de vídeo
Puede expulsar el cassette de vídeo cuando la unidad está en el modo de
espera. Ésta vuelve en espera una vez que haya expulsado el cassette de vídeo.
Por lo que respecta a la unidad principal.
Pulse [<, EJECT] en la unidad principal.
Por lo que respecta al mando a distancia.
Pulse [VHS], luego mantenga pulsado [, STOP] durante 3 segundos o más.
Haga disparar la lengüeta del cassette de vídeo para evitar un borrado accidental. Cubra el orificio con
una doble capa de cinta adhesiva para cuando quiere usar el cassette de vídeo para una nueva
grabación.
Puede usar los cassettes de vídeo con las marcas VHS y S-VHS, pero esta unidad no permite disfrutar
plenamente las características de los cassette de vídeo S-VHS.
Operaciones preliminares
Seleccione ha unidad que ve el canal (o la entrada AV) en el televisor.
Pulse [VHS].
[1] Pulse [Í, DVD/VHS POWER] para encender la
unidad.
[2] Inserte un cassette de vídeo grabado.
(larriba)
[3] Pulse [1, PLAY].
La reproducción inicia automáticamente si inserta un cassette
de vídeo al que se ha quitado su lengüeta.
Para reproducir todavía
Pulse [;, PAUSE]. (Pulse nuevamente la tecla para reanudar la
reproducción.)
Para detener la reproducción
Pulse [, STOP].
Nota:
Cuando está apagada la unidad, un cassette de vídeo insertado
puede ser reproducido pulsando [1, PLAY].
Cuando la cinta llega al fin, esta unidad la rebobina
automáticamente hasta el comienzo. Esta función no obra durante
la grabación temporizada, el avance rápido y la grabación con
parada especificada.
La búsqueda Jet, la localización progresiva, el rebobinado o la
reproducción lenta se quitan automáticamente a los 10 minutos, y
la reproducción de imagen fija a los 5 minutos.
Cuando ve una imagen fija o una reproducción lenta, la imagen
que aparece en el modo VP puede resultar distorsionada.
Cuando reproduce una cinta que fue grabada en otro VCR, puede ser
necesario ajustar la pista. En algunos casos, la calidad de la imagen
podría resultar todavía inferior. Esto se debe al formato limitado.
Mientras el disco está detenido
Pulse [6] (atrás)/[5] (en avance).
Durante la reproducción
Dé un ligero golpe en o mantenga pulsado [6]
(atrás)/[5] (en avance).
Si mantiene pulsadas estas teclas, la reproducción vuelve a iniciar
soltándolas.
Pulse [1, PLAY] para volver a iniciar la reproducción.
Durante la reproducción
Dé un ligero golpe en [6] (atrás)/[5] (en
avance) dos veces. Puede aumentar la localización
progresiva/velocidad de búsqueda en rebobinado.
Pulse [1, PLAY] para volver a iniciar la reproducción.
Seleccione la velocidad de búsqueda para ver la imagen grabada.
La imagen que aparece en el modo EP o VP a una velocidad
aproximada de 35 veces puede resultar distorsionada. Puede ocurrir un
desplazamiento vertical. Esto no es un funcionamiento defectuoso pero
puede tener lugar, cambie a una velocidad aproximada de 27 veces.
La imagen podría ser incolora o podría resultar distorsionada
según el televisor.
Durante la reproducción
Pulse y mantenga [
;
, PAUSE] durante 2 segundos o más.
Pulse [1, PLAY] para volver a iniciar la reproducción.
Para lograr un rebobinado más rápido
Pulse [JET REW6].
La indicación “J. REW” aparece en la pantalla del televisor (salvo
cuando aparece la indicación del tiempo que queda en la cinta).
Según la cinta o la condición de funcionamiento, la velocidad de
rebobinado puede variar un poco.
El contador de la cinta se repone a “0:00.00” cuando la cinta se
rebobina desde el comienzo.
Según la cinta, esta función podría no obrar.
Es también posible reproducir cintas grabadas en el sistema S-VHS.
Pueden tener lugar algunos ruidos según el tipo de cinta utilizada.
No es posible conseguir plenamente una resolución más alta que
la que es capaz el S-VHS.
No es posible grabar en el sistema S-VHS con esta unidad.
Durante la reproducción o mientras que está detenida
Mantenga pulsado [1, PLAY] durante
5 segundos o más.
En el visualizador aparece la indicación “RP”.
Al terminar el programa, la cinta se rebobina hasta
el comienzo y la reproduce nuevamente (esto sólo
funciona si destella al menos 5 segundos al fin del programa). Esto
se repite hasta que se suprime.
Para borrar
Pulse [, STOP].
Introducción de un cassette de vídeo
Cassette de vídeo
Reproducción de un cassette de vídeo
Lengüeta
Operaciones preliminares
Pulse [VHS].
Avance rápido / Rebobinado
Localización progresiva / Rebobinado
Búsqueda Jet
Lento
Rebobinado Jet
Cuasi reproducción S-VHS (SQPB)
Reproducción repetida
VHS
PP-Sample.book 81 ページ 2004年3月8日 月曜日 午後6時3分
82
Grabación
Operaciones preliminares
Seleccione ha unidad que ve el canal (o la entrada AV) en el
televisor.
Compruebe que el reloj esté ajustado al tiempo justo.
Pulse [VHS].
[1] Inserte un cassette de vídeo que tenga la
lengüeta intacta de protección contra el borrado
accidental.
(l 81)
[2] Pulse [CH, W, X] para seleccionar la estación
TV.
Es también posible seleccionar los canales con las teclas
numéricas.
Modo TV (Ondas hertzianas)
por ej., “5”: [0] )[5]
“15”: [1] )[5]
Modo CATV (Cable)
por ej., “5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
“115”: [1] )[1] )[5]
[3] Pulse [RECMODE] para seleccionar la velocidad
de la cinta.
Cada vez que pulsa la tecla:
SP>EP>VP>SP
[4] Pulse [¥, VHS REC] para iniciar la grabación.
Para detener temporalmente la grabación
Pulse [;, PAUSE]. (Pulse nuevamente la tecla para reanudar la
grabación.)
Para detener la grabación
Pulse [, STOP].
Nota:
Aunque el cassette que usa tenga la etiqueta “S-VHS”, no es
posible grabar en el sistema S-VHS con esta unidad. Ésta se
graba en el normal sistema VHS.
No puede reproducir grabaciones VP en otro equipo.
No puede cambiar canales mientras graba. Puede cambiar
canales mientras está en el modo de pausa.
Cuando la grabación está en pausa durante más de 5 minutos, la
unidad vuelve al modo de parada.
Para visualizar el tiempo aproximado que queda en la
cinta
[1] Pulse [VHS MENU].
[2] Seleccione “SELECCIONAR CINTA” con [3, 4].
[3] Utilice[2, 1] para seleccionar la correspondiente longitud de la
cinta.
[4] Pulse [STATUS].
El visualizador cambia tan pronto como se pulsa cada vez
[STATUS].
Reloj )Contador )Tiempo que queda en la cinta )Reloj
El tiempo que queda en la cinta podría no visualizarse
correctamente según la cinta usada.
Para especificar un tiempo para detener la grabación
Durante la grabación
Pulse [¥, VHS REC] para seleccionar el tiempo de
grabación.
En la unidad principal, pulse [¥, REC].
Visualización de la unidad
Cada vez que pulsa la tecla:
Contador (suprimir) # 0:30 # 1:00 # 1:30
^------- 4:00 ! 3:00 ! 2:00 !--------}
Referencia
Esto no funciona durante las grabaciones temporizadas.
Pulsando [, STOP] la grabación se detiene y el horario
configurado se borra.
El tiempo ajustado se va a borrar si cambia Ud. el modo de
grabación o bien el canal mientras que la grabación está en pausa.
l 79
Grabación de programas televisivos
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
POWER
TIME SLIP
CHAPTER
JET REW
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
DVD ERASE
VCR Plus+
OUTPUT
VHS
VHS MENU
REC MODE
;
CH, W, X
µ
3, 4, 2, 1
ENTER
RETURN
STATUS
PROG/CHECK
Teclas
numéricas
Velocidad de la cinta
SP: Puede grabar la longitud señalada en la cinta.
EP: Tres veces la longitud del modo SP.
VP: Cinco veces la longitud del modo SP.
Para conseguir una duración de grabación más larga, seleccione
“EP” o “VP”.
Si la calidad de la imagen es importante para Ud. o bien si quiere
almacenar la cinta durante un largo período, seleccione “SP”.
Esta unidad puede reproducir cintas grabadas con el modo LP en
otro equipo (se enciende “LP” en el visualizador).
Modo VP:
“VP” destella en el visualizador de la unidad durante 8 segundos
después de iniciar la grabación.
Una cinta grabada en el modo VP por esta unidad no puede
ser reproducida por otro modo VCR. Se recomienda que se la
distingue de otra cinta indicando “VP” en su etiqueta, etc.
Lleva más tiempo para que funcione la pista automática cuando
se reproducen cintas en el modo VP y, en algunas cintas, podría
no funcionar de ninguna manera.
Recepción de las transmisiones
televisivas durante la grabación
VHS
PP-Sample.book 82 ページ 2004年3月8日 月曜日 午後6時3分
83
Ejecución de grabaciones temporizadas
Puede introducir hasta 16 programas con un adelanto de un mes.
Operaciones preliminares
Seleccione ha unidad que ve el canal (o la entrada AV) en el
televisor.
Compruebe que el reloj esté ajustado al tiempo justo.
Inserte un cassette de vídeo que tenga la lengüeta de protección
contra el borrado accidental intacta. (l 81)
Pulse [VHS].
Se refiera a “Uso del sistema VCR Plus+”, paso 1–5. (l 80)
Cuando se conecte una caja TV de cable o un receptor de satélite,
seleccione el canal en la caja TV de cable o receptor de satélite
antes de que comience la grabación temporizada.
[1] Pulse [PROG/CHECK].
Cerciórese de que esté seleccionado “NUEVO PROGRAMA”.
[2] Pulse [ENTER].
[3] Utilice [1] para desplazar y cambiar los detalles
con [3, 4].
Pueden usarse las teclas numéricas para introducir “CA”,
“FECHA”, “ACT” y “DES”.
CA (Posición del programa/Nombre de la estación de TV)
FECHA
Puede crear usted un programa diario o semanal.
ACT (hora de encendido)/DES (hora final)
Si mantiene pulsado el botón, el tiempo aumentará o
disminuirá en incrementos de 30 minutos.
Velocidad de la cinta
Para cambiar el modo de grabación, puede pulsar también
[REC MODE].
SP,.EP,.VP,.A°,.SP... (l 82)
° Modo SP/EP automático (lderecha)
[4] Al terminar las correcciones pulse [ENTER].
” se enciende en el visualizador de la unidad.
Para continuar programando:
Seleccione “NUEVO PROGRAMA” y repita los pasos 2–4.
[5] Pulse [RETURN].
Nota
” y “1” destella cuando la unidad no puede alcanzar la
grabación temporizada (por ejemplo, el cassette de vídeo sin
lengüeta de protección o bien un cassette de vídeo en su
respectivo compartimento).
El tiempo real grabado podría alargarse más allá del programa
mismo cuando los programas TV se graban usando el sistema
VCR Plus_.
Si ajusta “HL” (Tiempo de ahorro de la luz del día) a “ACT” cuando
ajusta manualmente el reloj, la grabación temporizada podría no
funcionar cuando del verano cambia al invierno y viceversa.
Para detener la grabación mientras un programa está
trabajando
Pulse [, STOP], luego [ENTER] dentro de 5 segundos.
Puede también seguir pulsando [] en la unidad principal durante
más de 3 segundos para detener la grabación.
Si, al comienzo del programa temporizado, no hay cinta bastante
para terminarlo, la función SP/EP hará marchar automáticamente la
cinta a la velocidad EP. Esto garantiza que será grabado el entero
programa. Si el modo EP no es bastante para alargar la cinta que
queda, no será posible grabar todo el programa TV.
No es posible activar automáticamente el modo VP.
La longitud de la cinta ha de ser ajustada correctamente.
Algunas cintas podrían no funcionar correctamente.
Si cambia el modo de grabación de SP a EP durante la grabación
temporizada, en aquel punto podría tener lugar una breve
distorsión de la imagen.
Se refiera a “Controle, cambie o borre el programa”, paso 1–5.
(l 80)
l 80
Precauciones en la grabación temporizada
Cuando llega el tiempo que se definió, la grabación
temporizada inicia automáticamente.
La grabación temporizada puede iniciar mientras la unidad
está tanto apagada como encendida. Cuando la unidad está
apagada, el sonido y el vídeo no salen en el televisor.
Uso del sistema VCR Plus+
Programación manual
Modo SP/EP automático
Controle, cambie o borre el programa
Precauciones al usar la grabación
temporizada en DVD y VHS
Programación temporizada
Cinta de vídeo
Primer programa
(30 min.)
30 min. en SP
Segundo programa (60 min.)
15 min.
en SP
45min.
en EP
VHS
PP-Sample.book 83 ページ 2004年3月8日 月曜日 午後6時3分
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS 2.0iDigital Out” are trademarks of Digital
Theater Systems, Inc.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and
4,819,098, licensed for limited viewing uses only.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
VCR Plus+ and PlusCode are registered trademarks of Gemstar
Development Corporation.
The VCR Plus+ system is manufactured under license from
Gemstar Development Corporation.
Pats. 5,307,173; 5,335,079; 4,908,713; 4,751,578; and 4,706,121
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Sales Company,
Division of Matsushita Electric of
Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
www.panasonic.ca
C 2004 Matsushita Electric Industrial Co., Ltd.
VQT0H76
F0304Fa0 ( 18000 A )
PP-Sample.book 84 ページ 2004年3月8日 月曜日 午後6時3分
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84

Panasonic DMRE75VS Manual de usuario

Categoría
Reproductores de DVD
Tipo
Manual de usuario
Este manual también es adecuado para

En otros idiomas