Sanyo FWBP706F Guía de inicio rápido
- Categoría
- Reproductores de Blu-Ray
- Tipo
- Guía de inicio rápido
No
Yes
OK
OK
OK
Previous
Previous
OK
Previous
OK
Previous
By connecting this unit to the Internet,
the following functions are available :
To use the above functions,
please setup with Network Settings.
USB Setup
Netflix VUDU YouTube
Disc
Next
Off
Page: 2/5
Switch Voice Guide On or Off.
Sets On the Voice Guide, "Audio Output/HDMI"
setting will set to "PCM" automatically. Some audio
will be output in 2ch format. If Voice Guide is ON, it
will not be able to set the "Audio Output/HDMI".
Easy Setup
Next
Page: 1/5
Language Setting
Please select your language for on-screen
display. If you want to use the Voice Guide
function, please set to "English" or
"Español".
Easy Setup
Español
English
Français
Next
Page: 3/5
HDMI CEC Setting
Set up HDMI CEC function.
For details, please check the owner’s manual.
Easy Setup
Off
Next
Page: 4/5
Automatically check for latest software
When connected to the internet, the unit
will automatically check for the latest
software.
Easy Setup
Off
Next
Page: 5/5
Network Connection Set up
Easy Setup
Not now
SSID Security Signal Strength
WPA2-PSK
WPA-PSK
WPA2-PSK
WPA2-PSK
WPA-PSK
WPA2-PSK
100%
100%
100%
100%
100%
100%
access_point_
access_poi...
access_poi...
access_poi...
access_poi...
access_poi...
WPA2-PSK
Exit
Next
Previous
_
Connection Failed.
OK
Scanning...
Cancel
abcde123
f
g
hi j456
klmno789
pq r s
t
.
@0
uvwxy z
Back Space Enter Clear
Connection success and IP is obtained.
OK
PBC
PIN
Please press Push Button on the Access Point within
120 seconds after you select the "Next" Button below.
WPS(Wi-Fi Protected Setup)
PreviousRefresh Next
Setup
EthernetInterface
Language
Streaming Co...
Security
System
Wireless Setting
Network Status
Connection Test
IP Setting
Network
Wireless
Setup
Language
Streaming Co...
Security
System
Network
Wireless Setting
Scan
Manual
Auto
Exit Next
Setup
Language
Streaming Co...
Security
System
Wireless Setting
Network Status
IP Setting
MoreNetwork Interface
Connection Test
Waiting
...
Cancel
ABC
Scan
rear
bottom
cover
Check
SSID and
KEY information (Password)
for your router.
example:
SSID : XXXXXXXXXXXX
KEY : XXXXXXXXXXXX
PIN : XXXXXXXXXXXX
Auto
Please verify your settings and try again.
For detailed instructions, refer to the Online
Owner's manual.
www.sanyo-av.com
Wired
Wireless
Wireless network setting is
completed.You are ready to enjoy
network features over Wirelessly!
PBC
Please push PBC button
on your access point.
WPA2-PSK
Exit
**********
Previous
Next
Select “Enter”,
then press
Select “Enter”,
then press
For product recycling information, please visit -
www.sanyo-av.com
y
Click on
© 2017 Funai Electric Co., Ltd.
Printed in Philippines
ECT0AUL
2VMN00367
★★★★★
INSERT BATTERIES
Install 2 AAA (1.5V) batteries (not included)
1. POWER-ON
Press to turn On the unit, or to
switch the unit into Standby
mode. (To completely turn Off
the unit, you must unplug the
AC power cord.)
2. CURSOR
Press to select items or
settings.
3. OK
Press to confi rm or select
menu items.
4. MODE
During playback, press to
display the Play Menu to
confi gure playback functions
such as Search, Repeat, Angle,
etc.
5. PLAY/PAUSE
Press to start playback or
resume playback.
Press to Pause playback.
6. SUBTITLE/AUDIO
Press to select Subtitles or
Audio Channel (such as audio
languages) on a disc.
7. OPEN/CLOSE
Press to Open or Close the disc
tray.
8. HOME
Press to display the Home
Menu.
9. RETURN
Press to Return to the
previously displayed menu or
screen function.
10. YouTube/NETFLIX/VUDU
Press to Launch VOD.
1 2 3
2
1
3
8
7
9
10
4
5
6
HDMI1
Internet
Wired Connection
Modem or
Router
Wireless Connection
Wireless broadband
router
HDMI cable
(not included)
or
LAN cable (not included)
AC
plug
POWER INPUT / SOURCE
Active Internet connection is required to your
modem or broadband router. If there is
trouble connecting to the Internet, refer to
relevant topics in TROUBLESHOOTING.
1
2
3 4
Wireless and Wired Connections
You need to confi gure network settings in order to use Internet services.
Problem Tip
No power.
•
Check if the AC power cord is properly connected.
•
Unplug the AC power cord, and wait for about 5-10 seconds. Plug
it back in and attempt to Power On the unit.
No sound or
picture.
•
Make sure both the TV and Blu-ray Disc™ player are turned On.
•
Confi rm the connections to the TV are made properly as shown in
CONNECTIONS, then select the input on your TV.
No reaction
to the remote
control.
•
Confi rm that the player’s AC power cord is plugged into a power outlet.
•
Check the batteries in the remote control, and make sure they are
inserted properly by + or - symbols.
No sound
or distorted
sound.
•
Adjust the volume.
•
Make sure the HDMI cable is not plugged into an HDMI-DVI
adapter which does not handle Digital sound.
Cannot play
back a disc.
•
Make sure that the product supports the disc.
•
Check the region code of the disc. This unit supports the following
region codes.
-
Blu-ray Disc™: “A”
-
DVD: “ALL” or “1”
•
Clean the disc.
Cannot
connect to
the network.
•
Check to see if the modem / router has Power turned On.
•
Confi rm, if the Internet light is showing activity (light blinking) on
the modem / router.
•
Turn Off this unit and the modem/router (if it has a Power button),
then unplug their AC cords. After 30 seconds, plug them back in
and turn the devices back On. If you have a telephone / Internet
modem with your cable service, then you may have to use its reset
button or remove the backup battery to reset this type of modem.
Now wait for the lights to show activity and try reconnecting.
•
Check the cable connections to the router when connecting with a
LAN cable.
•
Confi rm the security protocol of the router. WPS (Wi-Fi Proteced
Setup) cannot be used if the security protocol is set to “WEP”.
•
If none of the above suggestions fi x the issue, please contact your
ISP (Internet Service Provider) for further assistance.
•
Once you have activated the wireless connection, please wait 30
seconds for the connection to be established after turning On the
unit, before trying to access network features such as BD-Live™
and the third-party network services.
If you do not find a solution above, please visit our website
www.sanyo-av.com
for the Online Owner’s Manual.
Please download it and then refer to “TROUBLESHOOTING” section
for more information.
SANYO is a registered trademark of SANYO Electric Co., Ltd. and is used by Funai Electric Co., Ltd. and Funai Corporation, Inc. under license
from SANYO Electric Co., Ltd. Any liability related to SANYO products, including design and quality, is the sole responsibility of Funai Electric
Co., Ltd. and Funai Corporation, Inc. Please contact Funai Corporation, Inc. for any questions or claims related to SANYO products:
www.sanyo-av.com
www sanyo-av com
FWBP706F
FW
BP
Turn On the unit and your TV, then select the input on your TV.
Language Selection
HDMI CEC Setting
HOME MENU
Voice Guide Setting
Automatically Check Software
Network Setting
DISC USB Setup
NETFLIX VUDU YouTube
If your router has a PBC* (Push Button Confi guration) button, you can use “PBC” which is the easiest way to set
up a wireless connection.
If your router does not have it, please use the “Scan” setup.
* PBC button may be called WPS button on your wireless router.
The unit automatically searches
The unit automatically searches
for nearby wireless access points.for nearby wireless access points.
Wireless connection process Wireless connection process
now starts.now starts.
Connection failure message
Connection failure message
appears.appears.
Connection success message
Connection success message
appears.appears.
Select the
Select the
SSID
SSID
(wireless access point)(wireless access point)
to connect to.
to connect to.
Password entry screen
Password entry screen
appears.appears.
etwork”
Select “Ne
o
elect Ne
tw
S
S
twor
Select “Ne
t
Select
k
S
Select “Network”
AA
e
”
“Interface
“Interface”
AA
“Wireless”.“Wireless”.
Select “Network”Select “Network”
A
“Interface”
A
”Etherne
et”.
Connect a LAN cable, and then confi guratio
on
guratio
o
Connect a LAN cable, and then confi gurat
n
nnect a LAN cable, and then confi gurati
o
onnect a LAN cable, and then configurati
Connect a LAN cable, and then confi guration
will automatically be performed.
will automatically be performed.
How to check the connection
Select “Network”
A
“Connection Test
t”.
Select the desired wireless Select the desired wireless
setup method.setup method.
Select the desired
Select the desired
wireless setup method.wireless setup method.
Enter the
Enter the
password of
password of
your wireless router.
your wireless router.
At the confirmationAt the confirmation
screen, select
screen, select
[Next]
[Next]
to
to
move on.move on.
Register Online at www.sanyo-av.com/support/ today to get the most benefits from your purchase.
Registering your model with SANYO makes you eligible for all of the valuable benefits such
as software upgrades and important product notifications.
Register Online at
www.sanyo-av.com/support/
Quick Start Guide
Blu-ray Disc™ & DVD Player with Built-in Wi-Fi
C
onnections
I
nitial
S
etup
R
emote
C
ontrol
N
etwork
S
etup
T
roubleshooting
NOTE(
S
):
• If you are experiencing signal issues with
your wireless connection, please confirm
that your wireless router is placed close
enough to the unit.
NOTE(
S
):
• Do not mix old and new batteries.
• Do not mix alkaline, standard
(carbon-zinc) or rechargeable (ni-cad,
ni-mh, Li-ion, etc.) batteries.
1 2
3
N
etwork
S
etup
3
See the Online Owner’s Manual for details:
www.sanyo-av.com
1
Please visit website
www.sanyo-av.com
2
Select Download.
3
Type in the Model #
“FWBP706F”
and click
“Search”
.
4
Select the Manual and click on
“Download”
.
S
afety
I
nstructions
The Model and Serial Numbers of this Unit may be found on the cabinet. You
should Record and Retain those Letters / Numbers for future reference. Please
refer to the LIMITED WARRANTY for more information.
Model No.:
Serial No.:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO
DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The important note and rating are located on the rear or bottom of the cabinet.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
The symbol for CLASS ll (Double Insulation)
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart /
apparatus combination to avoid injury from tip-over.
13.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the manual. The user could lose the authority
to operate this equipment if an unauthorized change or modification is made.
Disconnect the mains (AC) plug to shut the unit Off when trouble is found or when not
in use. The mains (AC) plug shall remain readily available.
To completely turn Off the unit, you must unplug the mains (AC) power cord.
CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
WARNING:
Batteries (Battery pack or battery installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
Do not place the unit on the furniture that is capable of being tilted by a child and
an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious
injury or even death.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1.
Reorient or relocate the receiving antenna.
2.
Increase the separation between the equipment and receiver.
3.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
4.
Consult the dealer or an experienced radio / TV technician for help.
L
imited
W
arranty
NINETY (90) DAY LABOR / ONE (1) YEAR PARTS
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or the person receiving the product
as a gift against defects in materials and workmanship as based on the date of original
purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing
the product name and the purchase date from an authorized retailer is considered such proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material or workmanship occurs and a valid
claim is received within the Warranty Period. At its option, the company will either (1) repair
the product at no charge, using new or refurbished replacement parts, or (2) exchange the
product with a product that is new or which has been manufactured from new, or serviceable
used parts and is at least functionally equivalent or most comparable to the original product
in current inventory, or (3) refund the original purchase price of the product.
Replacement products or parts provided under this warranty are covered against defects in
materials and workmanship from the date of the replacement or repair for ninety (90) days
or for the remaining portion of the original product’s warranty, whichever provides longer
coverage for you. When a product or part is exchanged, any replacement item becomes
your property and the replaced item becomes company property. When a refund is given,
your product becomes company property.
Note: Any product sold and identifi ed as refurbished or renewed carries a ninety (90) day
limited warranty.
Replacement product can only be sent if all warranty requirements are met. Failure to follow
all requirements can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company manufactured products that can be
identifi ed by the trademark, trade name, or logo affi xed to it. This Limited Warranty does
not apply to any hardware product or any software, even if packaged or sold with the
product, as manufacturers, suppliers, or publishers may provide a separate warranty for
their own products packaged with the bundled product.
The company is not liable for any damage to or loss of any programs, data, or other
information stored on any media contained within the product, or other additional product
or part not covered by this warranty. Recovery or reinstallation of programs, data or other
information is not covered under this Limited Warranty.
This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect,
misapplication, or non-supplied product, (b) to damage caused by service performed by
anyone other than company approved Authorized Service Location, (c) to a product or a part
that has been modifi ed without written company permission, or (d) if any serial number has
been removed or defaced, or (e) product, accessories or consumables sold “AS IS” without
warranty of any kind by including refurbished product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
•
Shipping charges to return defective product.
•
Labor charges for installation or setup of the product, adjustment of customer controls
on the product, and installation or repair of antenna/signal source systems outside of the
product.
•
Product repair and/or part replacement because of improper installation or maintenance,
connections to improper voltage supply, power line surge, lightning damage, retained
images or screen markings resulting from viewing fi xed stationary content for extended
periods, product cosmetic appearance items due to normal wear and tear, unauthorized
repair or other cause not within the control of the company.
•
Damage or claims for products not being available for use, or for lost data or lost
software.
•
Damage from mishandled shipments or transit accidents when returning product.
•
A product that requires modifi cation or adaptation to enable it to operate in any country
other than the country for which it was designed, manufactured, approved and/or
authorized, or repair of products damaged by these modifi cations.
•
A product used for commercial or institutional purposes (including but not limited to
rental purposes).
•
Product lost in shipment and no signature verifi cation receipt can be provided.
•
Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at: 1 866 212 0436
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY FOR THE CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION
OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential
damages, or allow limitations on how long an implied warranty lasts, so the above
limitations or exclusions may not apply to you.
This warranty gives you specifi c legal rights. You may have other rights which vary from
state/province to state/province.
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501
I
ncluded
A
ccessories
•
Remote Control (NC453UL)
•
Quick Start Guide
P
layable
M
edia and
F
ormat
Media
•
BD-video
•
BD-RE/-R
•
DVD-video
•
DVD-RW/-R
•
CD-DA
•
CD-RW/-R
•
DTS-CD
•
USB Memory Stick
Disc and USB Memory Stick Playable Format
•
AVCHD (only for DVD)
•
AAC
•
FLAC
•
MP3
•
WAV
•
JPEG
•
PNG
L
icense
This product includes some open source software that is subject to the GNU General
Public License (GPL), GNU Lesser General Public License (LGPL) and/or copyright
licenses, disclaims and notices. You can confi rm further information about these in the
“Copyright” section in “Setup” of this product. If you are interested in obtaining GPL
source code used in this product, please contact
FUNAI SERVICE CORPORATION
2425 Spiegel Drive, Groveport, OH 43125
LASER SAFETY
This apparatus is classified as a CLASS 1 LASER PRODUCT
This apparatus employs a laser. Only a qualified service person
should remove the cover or attempt to service this apparatus,
due to possible eye injury.
CAUTION:
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are
prohibited. This item incorporates copy protection technology that is protected by
U.S. patents and other intellectual property rights of Rovi Corporation. Reverse
engineering and disassembly are prohibited.
In order to avoid interruption of ventilation, this unit should not be placed in built-in
equipment such as a book cabinet, rack, etc., and the vents of this unit should not
be covered with anything such as a tablecloth, curtain, newspaper, etc. Make sure
to leave a space of 5.9 inches (15 cm) or more around this apparatus.
Never use a gas duster on this unit.
The gas trapped inside of this unit may cause ignition and explosion.
When installing this unit in a temperate environment, avoid a place with rapid
temperature changes.
This unit should not be used in a tropical environment as it has not been evaluated
under such conditions.
No objects should be placed directly on or under this unit, especially lighted
candles or other flaming objects.
®
is a joint program of the U.S. Environmental
Protection Agency and the U.S. Department of Energy helping us all
save money and protect the environment through energy efficient
products and practices.
The following FCC/IC RSS is description of Wireless LAN adapter.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Country Code Statement
For product available in the USA market, only channel 1~11 can be operated. Selection
of other channels is not possible.
To maintain compliance with FCC RF exposure requirements, use only belt-clips,
holsters or similar accessories that do not contain metallic components in its
assembly. The use of accessories that do not satisfy these requirements may not
comply with FCC RF exposure requirements and should be avoided.
This device complies with Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
D
isposal of
U
sed
B
atteries
•
In many areas Batteries may not be disposed of with your household
waste. Please ensure you dispose of Batteries according to local
Regulations.
S
ervicing
•
If this unit becomes inoperative, do not try to correct the problem by
yourself. There are no User-serviceable Parts inside. Eject the disc (if
possible), disconnect the USB Memory Stick (if connected), place the
Unit into Standby mode, Unplug the Power Plug, and then please visit:
www.sanyo-av.com
T
rademark
I
nformation
“Blu-ray Disc™”, “Blu-ray” and “Blu-ray
Disc™” logo are trademarks of the Blu-ray
Disc Association.
“BD-Live™” and “BD-Live™” logo are
trademarks of the Blu-ray Disc Association.
Logo Licensing Corporation.
For DTS patents, see
http://patents.dts.com.
Manufactured under license from DTS
Licensing Limited.
DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and
DTS 2.0+Digital Out is a trademark of DTS,
Inc.
© DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-
Defi nition Multimedia Interface, and the
HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the
United States and other countries.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, and the
double-D symbol are trademarks of Dolby
Laboratories.
“AVCHD” and the “AVCHD” logo are
trademarks of Panasonic Corporation and
Sony Corporation.
Java and all Java based
trademarks and logos are
trademarks or registered
trademarks of Oracle
and/or its affi liates.
Logo is a certifi cation
mark of the Wi-Fi
Alliance.
I
nstrucciones de
S
eguridad
El modelo y el número de serie de esta unidad se pueden encontrar en la caja.
Deberá anotar y guardar el modelo y el número de seriepara consultarlos, si los
necesita, en el futuro. Por favor consulte la LIMITED WARRANTY para mayor
información.
Número de modelo:
Número de serie:
ADVERTENCIA:
PARA REDUCIR EL RIESGO DE QUE SE PRODUZCA UN INCENDIO O SE RECIBA
UNA DESCARGA ELÉCTRICA, NO EXPONGA ESTE APARATO A LA LLUVIA NI
A LA HUMEDAD. NO SE DEBERÁ EXPONER EL APARATO NI A GOTERAS NI A
,
SALPICADURAS, Y NO DEBERÁ COLOCARSE NINGÚN OBJETO QUE CONTENGA
LÍQUIDOS SOBRE EL APARATO, COMO POR EJEMPLO JARRONES.
,
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVISO:
PARA REDUCIR EL RIESGO DE SUFRIR UNA DESCARGA ELÉCTRICA NO QUITE
LA CUBIERTA (O EL PANEL POSTERIOR). EN EL INTERIOR DEL APARATO NO
HAY PIEZAS QUE DEBA MANIPULAR EL USUARIO. SOLICITE EL SERVICIO DE
REPARACIONES AL PERSONAL DE SERVICIO CUALIFICADO.
Las notas importantes y la califi cación se encuentran ubicadas en la parte posterior
o inferior del gabinete.
El símbolo del rayo con punta de flecha, en el interior de un triángulo
equilátero, tiene la finalidad de avisar al usuario de la presencia de
“tensión peligrosa” dentro de la caja del aparato que podría ser
de suficiente intensidad como para constituir un riesgo para las
personas en caso de que éstas recibiesen una descarga eléctrica.
El signo de exclamación dentro de un triángulo equilátero tiene la
finalidad de avisar al usuario de la presencia de instrucciones de
utilización y mantenimiento (servicio) en el material impreso que
acompaña al aparato.
Símbolo de CLASE ll (doble aislamiento)
IMPORTANTES INSTRUCCIONES DE SEGURIDAD
1.
Lea estas instrucciones.
2.
Conserve estas instrucciones.
3.
Preste atención a las advertencias.
4.
Siga todas las instrucciones.
5.
No utilice este aparato cerca del agua.
6.
Limpie el aparato sólo con un paño seco.
7.
No obstruya ninguna de las ranuras de ventilación. Realice la instalación
según las instrucciones del fabricante.
8.
No instale el equipo cerca de elementos para calefaccionar tales como
radiadores, rejillas de calefacción, estufas eléctricas u otros aparatos
(incluidos amplificadores).
9.
No desarme el dispositivo de seguridad del enchufe polarizado o con
conexión a tierra. Un enchufe polarizado contiene dos clavijas, una más
ancha que otra. Un enchufe con conexión a tierra contiene dos clavijas y una
tercera clavija con conexión a tierra. La clavija ancha del enchufe polarizado
o la clavija de conexión a tierra representan dispositivos de seguridad. Si el
enchufe del aparato no entra en el tomacorriente, consulte con un electricista
para reemplazar sus antiguos tomacorrientes.
10.
Asegúrese de proteger el cable de alimentación de las pisadas o torsiones
especialmente en la zona de la clavija, en el receptáculo y en el punto donde
el cable sale del aparato.
11.
Utilice únicamente los accesorios que especifica el fabricante.
12.
Utilice únicamente el carro, atril, trípode,soporte o la mesa que
especifica el fabricante o que se vendió junto con el aparato.
Cuando utilice un carro, sea cuidadoso al trasladar el conjunto
carro/aparato para evitar daños por caídas de objetos.
13.
Desenchufe este aparato si hay tormentas eléctricas o durante
largos períodos de inactividad.
14.
Confíe el servicio técnico sólo a personal calificado. El servicio
técnico es necesario cuando el aparato sufre algún tipo de daño, por ejemplo
cuando se dañan los cables de suministro eléctrico o la clavija, cuando se
derrama líquido o se caen objetos sobre el aparato, cuando se lo expone a la
lluvia o a humedad, cuando no funciona adecuadamente o cuando se cae.
No coloque la unidad sobre un mueble que pueda volcar si algún niño o adulto
lo inclina, empuja, se coloca encima o trepa por él. La caída de la unidad puede
provocar lesiones graves e incluso la muerte.
Para evitar la interrupción de ventilación, esta unidad no se debe colocar en equipo
integrado tal como un gabinete de libros, bastidor, etc., y las ventilas de esta unidad
no se deben cubrir con nada como una tela, cortina, periódico, etc. Asegúrese de
dejar un espacio de 5,9 pulgadas (15 cm), o más, alrededor del aparato.
Nunca use un desempolvador a gas en esta unidad.
El gas del interior de la unidad puede inflamarse y explotar.
Cuando instale esta unidad en un ambiente templado, evite un lugar con cambios
rápidos de temperatura.
Esta unidad no se debe usar en una ambiente tropical ya que no se evaluó bajo
tales condiciones.
No se deben colocar objetos directamente sobre o debajo de esta unidad, en
especial velas encendidas o otros objetos con flama.
E
liminación de
B
aterías
U
sadas
•
En muchas áreas no se pueden eliminar baterías junto con los desechos
domésticos. Asegúrese de eliminar las baterías según las normativas
locales.
-
1
-
2
Sanyo FWBP706F Guía de inicio rápido
- Categoría
- Reproductores de Blu-Ray
- Tipo
- Guía de inicio rápido
en otros idiomas
- English: Sanyo FWBP706F Quick start guide
