Sanyo FWBP706F Setup Manual
- Categoría
- Reproductores de Blu-Ray
- Tipo
- Setup Manual
No Yes
Next
Previous
Español
Next
Page: 1/4 Easy Setup
NextPrevious
Not now
NextPrevious
On
This Wizard will go through the initial set up of this
BD Player. For detail settings,
please visit the Home Menu after this set up
is completed.
Choose OSD language for all OSD windows,
menu, etc...
Welcome to the Set up Wizard!
English
Français
Language Setting
Page: 2/4 Easy Setup
Page: 3/4 Easy Setup
Off
Set up HDMI CEC function.
For details, please check the owner’s manual.
HDMI CEC Setting
By connecting this unit to the Internet,
the following functions are available :
To use the above functions,
please setup with Network Settings.
Network Connection Set up
Page: 4/4 Easy Setup
Set up now
USB Setup
Netflix VUDU YouTube
Disc
Setup
WPA2-PSK
Exit
Network
Language
Streaming Co...
Security
System
EthernetInterface
Language
Streaming Co...
Security
System
Setup
Wireless Setting
Network Status
Connection Test
IP Setting
Network
Language
Streaming Co...
Security
System
Setup
Network
Wireless Setting
Scan
Manual
Auto
Scanning...
Setup
SSID Security Signal Strength
Setup
abc de123
fghij456
klmno789
pqr s
t
.@0
uvwxyz
Back Space Enter Clear
|
ABC
Setup
WPA2-PSK
Exit
**********
Setup
Waiting...
Language
Streaming Co...
Security
System
Network
PBC
PIN
Please press Push Button on the Access Point within
120 seconds after you select the "Next" Button below.
Language
Streaming Co...
Security
System
Wireless Setting
Network Status
IP Setting
MoreNetwork Interface
Connection Test
Setup
Connection Failed.
Setup
Connection success and IP is obtained.
Wireless
Exit Next
WPS(Wi-Fi Protected Setup)
PreviousRefresh Next
Cancel
Network
Language
Streaming Co...
Security
System
Network
Language
Streaming Co...
Security
System
WPA2-PSK
WPA-PSK
WPA2-PSK
WPA2-PSK
WPA-PSK
WPA2-PSK
100%
100%
100%
100%
100%
100%
access_point_
access_poi...
access_poi...
access_poi...
access_poi...
access_poi...
Next
Previous
Network
Language
Streaming Co...
Security
System
Cancel
Previous
Next
Network
Language
Streaming Co...
Security
System
Network
Language
Streaming Co...
Security
System
Network
Language
Streaming Co...
Security
System
OK
OK
Setup
Setup
Scan
Auto
Please verify your settings and try again.
For detailed instructions, refer to the Online Owner's manual.
sanyo-av.com
Wired
Wireless network setting is completed.
You are ready to enjoy network features over Wirelessly!
Wireless
_
Please push PBC button
on your access point.
Select “Enter”,
then press
Select “Enter”,
then press
PBC
For product recycling information, please visit -
sanyo-av.com
y
Click on
© 2016 Funai Electric Co., Ltd.
Printed in China
ECR01UH
2VMN00250
★★★★★
INSERT BATTERIES
Install 2 AAA (1.5V) batteries
(not supplied)
1. POWER-ON
Press to turn On the unit, or to
switch the unit into Standby
mode. (To completely turn Off
the unit, you must unplug the
AC power cord.)
2. CURSOR
Press to select items or
settings.
3. OK
Press to confi rm or select
menu items.
4. MODE
During playback, press to
display the Play Menu to
confi gure playback functions
such as Search, Repeat, Angle,
etc.
5. PLAY/PAUSE
Press to start playback or
resume playback.
Press to Pause playback.
6. SUBTITLE/AUDIO
Press to select Subtitles or
Audio Channel (such as audio
languages) on a disc.
7. OPEN/CLOSE
Press to Open or Close the disc
tray.
8. HOME
Press to display the Home
Menu.
9. RETURN
Press to Return to the
previously displayed menu or
screen function.
10. YouTube/NETFLIX/VUDU
Press to Launch VOD.
1 2 3
2
1
3
8
7
9
10
4
5
6
*2VMN00250*
Internet
Wired Connection
Modem or
Router
Wireless Connection
Wireless broadband
router
HDMI cable
(not supplied)
or
LAN cable (not supplied)
AC plug
Active Internet connection is required to your
modem or broadband router. If there is
trouble connecting to the Internet, refer to
relevant topics in TROUBLESHOOTING.
1
2
Wireless and Wired Connections
You need to confi gure network settings in order to use Internet services.
Problem Tip
No power.
•
Check if the AC power cord is properly connected.
•
Unplug the AC power cord, and wait for about 5-10 seconds. Plug
it back in and attempt to Power On the unit.
No sound or
picture.
•
Make sure both the TV and Blu-ray Disc™ player are turned On.
•
Confi rm the connections to the TV are made properly as shown in
CONNECTIONS, then select the input on your TV.
No reaction
to the remote
control.
•
Confi rm that the player’s AC power cord is plugged into a power outlet.
•
Check the batteries in the remote control, and make sure they are
inserted properly by + or - symbols.
No sound
or distorted
sound.
•
Adjust the volume.
•
Make sure the HDMI cable is not plugged into an HDMI-DVI
adapter which does not handle Digital sound.
Cannot play
back a disc.
•
Make sure that the product supports the disc.
•
Check the region code of the disc. This unit supports the following
region codes.
-
Blu-ray Disc™: “A”
-
DVD: “ALL” or “1”
•
Clean the disc.
Cannot
connect to
the network.
•
Check to see if the modem / router has Power turned On.
•
Confi rm, if the Internet light is showing activity (light blinking) on
the modem / router.
•
Turn Off this unit and the modem/router (if it has a Power button),
then unplug their AC cords. After 30 seconds, plug them back in
and turn the devices back On. If you have a telephone / Internet
modem with your cable service, then you may have to use its reset
button or remove the backup battery to reset this type of modem.
Now wait for the lights to show activity and try reconnecting.
•
Check the cable connections to the router when connecting with a
LAN cable.
•
Confi rm the security protocol of the router. WPS (Wi-Fi Proteced
Setup) cannot be used if the security protocol is set to “WEP”.
•
If none of the above suggestions fi x the issue, please contact your
ISP (Internet Service Provider) for further assistance.
•
Once you have activated the wireless connection, please wait 30
seconds for the connection to be established after turning On the
unit, before trying to access network features such as BD-Live™
and the third-party network services.
If you do not find a solution above, please visit our website
sanyo-av.com
for the Online Owner’s Manual.
Please download it and then refer to “TROUBLESHOOTING” section
for more information.
SANYO is a registered trademark of SANYO Electric Co., Ltd. and is used by Funai Electric
Co., Ltd. and Funai Corporation, Inc. under license from SANYO Electric Co., Ltd.
Any liability related to SANYO products, including design and quality, is the sole
responsibility of Funai Electric Co., Ltd. and Funai Corporation, Inc.
Please contact Funai Corporation, Inc. for any questions or claims related to SANYO
products: sanyo av.com
products: sanyo-av com
P706F
FW
BP
Turn On the unit and your TV, then select the input on your TV.
Welcome
HDMI CEC Setting
HOME MENU
Language Selection
Network Setting
DISC USB Setup
NETFLIX VUDU YouTube
If your router has a PBC* (Push Button Configuration)
button, you can use “PBC” which is the easiest way to set
up a wireless connection.
If your router does not have it, please use the “Scan” setup.
* PBC button may be called WPS button on your wireless
router.
The unit automatically searches for The unit automatically searches for
nearby wireless access points.
nearby wireless access points.
Wireless connection process now
ss connection process
s connection process
s
ss connection process no
connection proce
ele
t
e
e
Wireless connection process
t
Wireless connection process now
starts.starts.
Connection failure message appears.Connection failure message appears.
Connection success message appears.Connection success message appears.
Select the SSID (wireless
Select the SSID (wireless
access point) to connect to.access point) to connect to.
Password entry screen
Password entry screen
appears.appears.
work”
e
et
Select “Ne
o
elect Ne
tw
S
Select “Ne
etwor
Select “Ne
S
k
S
Select “Network”
AA
e
”
“Interface
“Interface”
AA
“Wireless”.“Wireless”.
Select “Network”Select “Network”
A
“Interface”
A
”Ethernet”.
Connect a LAN cable, and then confi guration
Connect a LAN cable, and then confi guration
will automatically be performed.will automatically be performed.
How to check the connection
Select “Network”
A
“Connection Test”.
esired wireless
he d
d
Select the
desired wireless
Select the
S
Select th
esired wirele
elect the
sired wireless
es
S
Select the desired wireless
setup method.
setup method
d
setup met
setup method.
Select the desired wireless
Select the desired wireless
setup method.setup method.
Enter the password of your Enter the password of your
wireless router.wireless router.
At the confi rmation screen,
At the confi rmation screen,
select select
[Next]
[Next]
to move on.
to move on.
Register Online at
sanyo-av.com/support/
today to get the most benefits from your purchase.
Registering your model with SANYO makes you eligible for all of the valuable benefits such
as software upgrades and important product notifications.
Register Online at
sanyo-av.com/support/
ypp
Setup Manual
Blu-ray Disc™ /
DVD Player
C
onnections
I
nitial
S
etup
R
emote
C
ontrol
N
etwork
S
etup
N
etwork
S
etup
T
roubleshooting
NOTE(
S
):
•
If you are experiencing signal issues
with
y
our wireless connection,
p
lease
con
f
irm that your wireless router is
placed close enou
g
h to the unit
.
1 2
3
3
See the Online Owner’s Manual for details:
sanyo-av.com
1
Please visit website
sanyo-av.com
2
Select Download.
3
3
Type in the Model #
“FWBP706F”
and click
“Search”
.
4
Select the Manual and click on
“Download”
.
S
afety
I
nstructions
Th
e Model and Serial Numbers of this Unit may be found on the cabinet.
You should Record and Retain those Letters / Numbers for future reference.
Please refer to the LIMITED WARRANTY for more information.
Model No.:
Serial No.:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL
NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The important note and rating are located on the rear or bottom of the cabinet.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of suffi cient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
The symbol for CLASS ll (Double Insulation)
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifi ers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fi t into your outlet, consult an electrician for replacement of
the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11.
Only use attachments/accessories specifi ed by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table
specifi ed by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart /
apparatus combination to avoid injury from tip-over.
13.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.
Refer all servicing to qualifi ed service personnel. Servicing
is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the manual.
The user could lose the authority to operate this equipment if an
unauthorized change or modifi cation is made.
Disconnect the mains (AC) plug to shut the unit Off when trouble is found or
when not in use. The mains (AC) plug shall remain readily available.
To completely turn Off the unit, you must unplug the mains (AC) power cord.
CAUTION:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING:
Batteries (Battery pack or battery installed) shall not be
exposed to excessive heat such as sunshine, fi re or the like.
Do not place the unit on the furniture that is capable of being tilted by a
child and an adult leaning, pulling, standing or climbing on it. A falling
unit can cause serious injury or even death.
L
imited
W
arranty
NINETY (90) DAY LABOR / ONE (1) YEAR PARTS
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or the person receiving the
product as a gift against defects in materials and workmanship as based on the date of
original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt
showing the product name and the purchase date from an authorized retailer is considered
such proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material or workmanship occurs and a valid
claim is received within the Warranty Period. At its option, the company will either (1) repair
the product at no charge, using new or refurbished replacement parts, or (2) exchange the
product with a product that is new or which has been manufactured from new, or serviceable
used parts and is at least functionally equivalent or most comparable to the original product
in current inventory, or (3) refund the original purchase price of the product.
Replacement products or parts provided under this warranty are covered against defects in
materials and workmanship from the date of the replacement or repair for ninety (90) days
or for the remaining portion of the original product’s warranty, whichever provides longer
coverage for you. When a product or part is exchanged, any replacement item becomes
your property and the replaced item becomes company property. When a refund is given,
your product becomes company property.
Note: Any product sold and identifi ed as refurbished or renewed carries a ninety (90) day
limited warranty.
Replacement product can only be sent if all warranty requirements are met. Failure to follow
all requirements can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company manufactured products that can be
identifi ed by the trademark, trade name, or logo affi xed to it. This Limited Warranty does
not apply to any hardware product or any software, even if packaged or sold with the
product, as manufacturers, suppliers, or publishers may provide a separate warranty for
their own products packaged with the bundled product.
The company is not liable for any damage to or loss of any programs, data, or other
information stored on any media contained within the product, or other additional product
or part not covered by this warranty. Recovery or reinstallation of programs, data or other
information is not covered under this Limited Warranty.
This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect,
misapplication, or non-supplied product, (b) to damage caused by service performed by
anyone other than company approved Authorized Service Location, (c) to a product or
a part that has been modifi ed without written company permission, or (d) if any serial
number has been removed or defaced, or (e) product, accessories or consumables sold “AS
IS” without warranty of any kind by including refurbished product sold “AS IS” by some
retailers.
This Limited Warranty does not cover:
•
Shipping charges to return defective product.
•
Labor charges for installation or setup of the product, adjustment of customer controls
on the product, and installation or repair of antenna/signal source systems outside of the
product.
•
Product repair and/or part replacement because of improper installation or maintenance,
connections to improper voltage supply, power line surge, lightning damage, retained
images or screen markings resulting from viewing fi xed stationary content for extended
periods, product cosmetic appearance items due to normal wear and tear, unauthorized
repair or other cause not within the control of the company.
•
Damage or claims for products not being available for use, or for lost data or lost
software.
•
Damage from mishandled shipments or transit accidents when returning product.
•
A product that requires modifi cation or adaptation to enable it to operate in any country
other than the country for which it was designed, manufactured, approved and/or
authorized, or repair of products damaged by these modifi cations.
•
A product used for commercial or institutional purposes (including but not limited to
rental purposes).
•
Product lost in shipment and no signature verifi cation receipt can be provided.
•
Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at: 1 866 212 0436
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY FOR THE CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION
OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential
damages, or allow limitations on how long an implied warranty lasts, so the above
limitations or exclusions may not apply to you.
This warranty gives you specifi c legal rights. You may have other rights which vary from
state/province to state/province.
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501
P
layable
M
edia and
F
ormat
Media
•
BD-video
•
BD-RE/-R
•
DVD-video
•
DVD-RW/-R
•
CD-DA
•
CD-RW/-R
•
DTS-CD
•
USB Memory Stick
Disc and USB Memory Stick Playable Format
•
AVCHD (only for DVD)
•
MP3
•
JPEG
•
PNG
•
AAC
•
FLAC
L
icense
This product includes some open source software that is subject to the GNU General
Public License (GPL), GNU Lesser General Public License (LGPL) and/or copyright
licenses, disclaims and notices. You can confi rm further information about these in the
“Copyright” section in “Setup” of this product. If you are interested in obtaining GPL
source code used in this product, please contact
FUNAI SERVICE CORPORATION
2425 Spiegel Drive, Groveport, OH 43125
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1.
Reorient or relocate the receiving antenna.
2.
Increase the separation between the equipment and receiver.
3.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4.
Consult the dealer or an experienced radio / TV technician for help.
LASER SAFETY
This apparatus is classifi ed as a CLASS 1 LASER PRODUCT
This apparatus employs a laser. Only a qualifi ed service
person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION:
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous
radiation exposure.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of
discs are prohibited. This item incorporates copy protection technology that
is protected by U.S. patents and other intellectual property rights of Rovi
Corporation. Reverse engineering and disassembly are prohibited.
This apparatus should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided. Make sure to leave a
space of 5.9 inches (15 cm) or more around this apparatus.
Never use a gas duster on this unit.
The gas trapped inside of this unit may cause ignition and explosion.
®
is a joint program of the U.S. Environmental
®
Protection Agency and the U.S. Department of Energy helping
us all save money and protect the environment through
energy effi cient products and practices.
S
upplied
A
ccessories
•
Remote Control (NC450UH)
•
Setup Manual
S
ervicing
•
If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no User-serviceable Parts
inside. Eject the disc (if possible), disconnect the USB Memory
Stick (if connected), place the Unit into Standby mode, Unplug
the Power Plug, and then please visit:
sanyo-av.com
T
rademark
I
nformation
“Blu-ray Disc™”, “Blu-ray” and “Blu-ray
Disc™” logo are trademarks of the Blu-
ray Disc Association.
“BD-Live™” and “BD-Live™” logo are
trademarks of the Blu-ray Disc Association.
Logo Licensing Corporation.
For DTS patents, see http://patents.dts.
com. Manufactured under license from
DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and
DTS 2.0+Digital Out is a trademark of
DTS, Inc.
© DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-
Defi nition Multimedia Interface, and the
HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the
United States and other countries.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, and the
double-D symbol are trademarks of Dolby
Laboratories.
AUDIO
™
“AVCHD” and the “AVCHD” logo are
trademarks of Panasonic Corporation and
Sony Corporation.
Java and all Java based
trademarks and logos are
trademarks or registered
trademarks of Oracle and/
or its affi liates.
certifi cation mark of the Wi-Fi Alliance.
sanyo-av.com
I
nstrucciones de
S
eguridad
El modelo y el número de serie de esta unidad se pueden encontrar en la caja.
Deberá anotar y guardar el modelo y el número de seriepara consultarlos,
si los necesita, en el futuro. Por favor consulte la LIMITED WARRANTY para
mayor información.
Número de modelo:
Número de serie:
ADVERTENCIA:
PARA REDUCIR EL RIESGO DE QUE SE PRODUZCA UN INCENDIO O SE
RECIBA UNA DESCARGA ELÉCTRICA, NO EXPONGA ESTE APARATO A
LA LLUVIA NI A LA HUMEDAD. NO SE DEBERÁ EXPONER EL APARATO
,
NI A GOTERAS NI A SALPICADURAS, Y NO DEBERÁ COLOCARSE
NINGÚN OBJETO QUE CONTENGA LÍQUIDOS SOBRE EL APARATO,
,
COMO POR EJEMPLO JARRONES.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVISO:
PARA REDUCIR EL RIESGO DE SUFRIR UNA DESCARGA ELÉCTRICA
NO QUITE LA CUBIERTA (O EL PANEL POSTERIOR). EN EL INTERIOR
DEL APARATO NO HAY PIEZAS QUE DEBA MANIPULAR EL USUARIO.
SOLICITE EL SERVICIO DE REPARACIONES AL PERSONAL DE
SERVICIO CUALIFICADO.
Las notas importantes y la califi cación se encuentran ubicadas en la parte
posterior o inferior del gabinete.
El símbolo del rayo con punta de fl echa, en el interior de un
triángulo equilátero, tiene la fi nalidad de avisar al usuario
de la presencia de “tensión peligrosa” dentro de la caja del
aparato que podría ser de sufi ciente intensidad como para
constituir un riesgo para las personas en caso de que éstas
recibiesen una descarga eléctrica.
El signo de exclamación dentro de un triángulo equilátero
tiene la finalidad de avisar al usuario de la presencia de
instrucciones de utilización y mantenimiento (servicio) en el
material impreso que acompaña al aparato.
Símbolo de CLASE ll (doble aislamiento)
IMPORTANTES INSTRUCCIONES
DE SEGURIDAD
1.
Lea estas instrucciones.
2.
Conserve estas in
strucciones.
3.
Preste atención a las advertencias.
4.
Siga todas las instrucciones.
5.
No utilice este aparato cerca del agua.
6.
Limpie el aparato sólo con un paño seco.
7.
No obstruya ninguna de las ranuras de ventilación. Realice la instalación
según las instrucciones del fabricante.
8.
No instale el equipo cerca de elementos para calefaccionar tales como
radiadores, rejillas de calefacción, estufas eléctricas u otros aparatos
(incluidos amplifi cadores).
9.
No desarme el dispositivo de seguridad del enchufe polarizado o con
conexión a tierra. Un enchufe polarizado contiene dos clavijas, una más
ancha que otra. Un enchufe con conexión a tierra contiene dos clavijas
y una tercera clavija con conexión a tierra. La clavija ancha del enchufe
polarizado o la clavija de conexión a tierra representan dispositivos
de seguridad. Si el enchufe del aparato no entra en el tomacorriente,
consulte con un electricista para reemplazar sus antiguos tomacorrientes.
10.
Asegúrese de proteger el cable de alimentación de las pisadas o
torsiones especialmente en la zona de la clavija, en el receptáculo y en el
punto donde el cable sale del aparato.
11.
Utilice únicamente los accesorios que especifi ca el fabricante.
12.
Utilice únicamente el carro, atril, trípode,soporte o la mesa
que especifica el fabricante o que se vendió junto con el
aparato. Cuando utilice un carro, sea cuidadoso al trasladar
el conjunto carro/aparato para evitar daños por caídas de
objetos.
13.
Desenchufe este aparato si hay tormentas eléctricas o
durante largos períodos de inactividad.
14.
Confíe el servicio técnico sólo a personal calificado. El servicio técnico
es necesario cuando el aparato sufre algún tipo de daño, por ejemplo
cuando se dañan los cables de suministro eléctrico o la clavija, cuando se
derrama líquido o se caen objetos sobre el aparato, cuando se lo expone
a la lluvia o a humedad, cuando no funciona adecuadamente o cuando
se ca
e.
No coloque la unidad sobre un mueble que pueda volcar si algún niño
o adulto lo inclina, empuja, se coloca encima o trepa por él. La caída de
la unidad puede provocar lesiones graves e incluso la muerte.
El aparato no debe colocarse en una instalación empotrada (por
ejemplo: una biblioteca o un estante) a menos que cuente con la
adecuada ventilación. Asegúrese de dejar un espacio de 5,9 pulgadas (15
cm), o más, alrededor del aparato.
Nunca use un desempolvador a gas en esta unidad.
El gas del interior de la unidad puede infl amarse y explotar.
-
1
-
2
Sanyo FWBP706F Setup Manual
- Categoría
- Reproductores de Blu-Ray
- Tipo
- Setup Manual
en otros idiomas
- English: Sanyo FWBP706F