wedi US5000001 Especificación

Marca: wedi

Modelo: US5000001

Tipo: Especificación

Este manual también es adecuado para

Shower & Spa

System Solutions

Innovation. System. Quality.

Your local wedi distributor:

US www.wedicorp.com

Bryan Baeumler

Did you know?

Great quality installation results depend on not only having great products to use – the Know-How and Experience in

how to use them is key too. wedi trained and certified all Baeumler Quality Construction installers in my team and now

they fully know and appreciate what they can achieve with wedi.

This educational service is offered to all professional contractors of all trades and wedi‘s local Technical Sales Support

Managers come out on site and install with you when you do your first wedi shower installation. Your peace of mind

– at no charge. Just a call away!

D 03/17 K 03/17 Subject to technical modications.

wedi is a proud member of:

Be sure to ask for:Ask your wedi Representative about our

15 and 20 year extended PRO Warranty Program.

wedi Corporation

Telephone: 877-933-WEDI (9334)

Fax: 847-357-9819

[email protected]

www.wedicorp.com

Made in

Germany

Made

in USA

PRO

2 3

“ My reputation is built on quality installations, zero call backs, clean and predictable professional work. My customer‘s depend

on my word, that‘s why I rely on wedi waterproof shower systems which offer the only complete, reliable, cost-efﬁcient

solution for constructing 100 % waterproof and mold proof showers. These systems are easy to install, ready to tile the

same day and open up a whole new world of custom design possibilities for showers, wet areas and baths. And to be sure:

I contacted wedi to enjoy their on-site training and certiﬁcation program.“

Bryan Baeumler

Owner of Baeumler Construction and

Host of HGTV’s “Leave it to Bryan”

Toronto, Canada

100% waterproof – with

manufacturer‘s guarantee

Multiple customizable

products sizes

Easy and safe modular

installation

Natural protection

against mold

Fastest Installation of waterproof,

custom tiled showers in the industry

Ready to tile upon installation –

Any size or type tile & stone

Table of contents

wedi Fundo Primo Kit 10

wedi Fundo Riolito neo Kit 11

wedi Fundo Primo 12

wedi Fundo Primo installation 14

wedi Fundo Ligno 18

wedi Fundo Ligno installation 20

wedi Fundo Riolito neo 24

wedi Fundo Riolito neo installtion 26

wedi Fundo Riolito neo Modular 28

wedi Fundo Riolito neo Modular installation 30

Installation instructions Drain Cover 32

wedi Sanoasa Benches 34

wedi Prefabricated Shower Seats and Benches 35

Specialty Applications 36

Technical Properties 38

wedi PRO Certification and 15 / 20 Year Warranty Program 39

Article data 40

wedi Custom Wellness & Spa Design Solutions 50

4 5

wedi Prefabricated Modules

wedi Prefabricated Modules open up a whole new world of design pos-

sibilities for showers, wet areas and baths.



Curbs



Recessed Niches



Benches and Seats



Sloped Shower Ramps

Installation Accessories & Tools

wedi Installation Accessories & Tools offer additional products you need

for the installation and guarantee maximum safety and easy handling.



Joint Sealant and Accessories



Vapor Barrier for Steam Rooms



Fastener Systems (metal washer, screws)

wedi Building Panel

wedi Building Panels are the ultimate and complete wet room tile

backer board and often used within the range of wedi shower systems

as well as on walls, floors, countertops and many more applications.



For Shower, Tub & Steam Room Walls and Ceilings



Over Wood and Concrete Subfloors –

With or Without Floor Warming Systems



In Countertops Applications



Constructing Individual Tileable Furniture

wedi Shower System Solutions

wedi Waterproof Shower Systems offer reliable, cost-efficient solutions

for constructing 100 % waterproof and mold proof showers and are

easy to install.



Fundo Primo, Shower Base and Accessories



Fundo Ligno, Barrier Free Shower Base



Fundo Riolito neo, Shower Base with linear drain



Shower Base Extensions



Fundo Riolito Discreto, Tileable vertical drain cover system

wedi Fundo Primo

The original wedi Fundo: Robust,

pre sloped, waterproof, shower floor

bases with 4“x 4“ drain cover.

Customizable on site.

wedi Fundo Riolito neo /

Riolito neo Modular

Fully factory integrated linear

drainage. Models include one-way,

two-way and four-way slope designs.

wedi Fundo Ligno

Our newest Fundo model: Floor level

3/4“ profile designed especially for

suspended wood subfloors. Like all

wedi shower bases it is pre sloped,

and waterproof. Comes with 4“x 4“

drain cover. Customizable on site.

6 7

wedi Fundo Discreto

Wall drain module for integration in

seats or false walls. Installs over select

Riolito neo linear drain models.

Cover is tileable on one side and pol-

ished stainless steel on reverse side.

wedi Building Panels

Perfect substrate for practically any

wall or floor application.

wedi Fundo Primo Drains & Covers

The perfectly easy to use compres-

sion fit black PVC drain is always

included with a standard Drain

Cover Set.

wedi Shower Benches

Prefabricated, slightly sloped bench

options or simply built on site to fit

using wedi 2“ or 1 1/2“ Building

Panel

wedi Wall Mounted Triangle Seat

Suspended seat solution, equipped

with mounting bracket system for

installation into existing framing

wedi Niches

The perfect fit for all shower

necessities

8 9

wedi Curbs

For shower entry design where safe

and sound transitions are required

wedi Sloped Shower Ramps

Where wheelchair accessible or ADA

compliant entries are required

wedi Shower Base Extension

Extend any wedi shower floor base

type using pre-sloped extension

modules featuring pre-made con-

nections to any base.

wedi Fundo Shower Kits



Available as wedi Fundo Primo Kit (point drain) and

Fundo Riolito neo Kit (linear drain)



Easy to install and blending the traditional values of design

flexibility and robustness while offering the added benefits

that come with state of the art material and manufacturing

technologies



No more presloping, pan liner cracks or membrane pin

holes, clogged drain weepholes and mold growth



Reducing the traditional installation time and down times

for a full shower floor preparation for tiling from 2 – 3 days

to now 30 minutes

wedi Fundo Primo Kit

wedi Fundo Primo

offers a point drainage

shower system

wedi Building Panel,

the perfect tiling

substructure for walls

Subliner Dry Flexi Collars

for pipes and valves

wedi Full Foam Shower

Curb included

10 11

wedi Fundo Riolito neo KitThe total shower solution



All you need to build a shower system ready for tile in one

Kit box – selectively with point or linear drain



Entire System is 100% waterproof and moldproof



Very low weight, but extremely durable



For a safe modular installation with option to field modify

system components for custom tiled showers



Installers and builders save time and money and are

protected under wedi system warranty covering the entire

shower substrate

Drain unit

wedi Building Panel

wedi joint sealant, perma-

nently flexible, waterproof

and a strong adhesive

wedi Full Foam Curb Lean

wedi Fundo Riolito neo

linear drain system

(optional cover plate

available in three designs)

wedi Niche

(optional)

Subliner Dry Flexi

Collars for pipes

and valves

wedi Fundo Primo

The wedi Fundo Primo Shower System features a square drain cover point drainage solution for fast and safe renovation and new construction installations.

Primo is internally waterproof due to its wedi XPS foam‘s closed cell structure and naturally protect against mold or mildew like every wedi XPS foam based

product. It is fast and clean to cut to fit custom designs while the level of prefabrication reduces installation time significantly. The shower floor units feature

a strong and pre-sloped surface which can be tiled over immediately whether you choose mosaic size or large format tile. Drain unit and drain cover set is

always included with each Primo shower floor unit while further optional drain cover designs are available. Pre-sloped extension panels are available so that

virtually no limit exists for making any size or shape for custom shower designs happen. The added values offered by Fundo Primo come in form of many

more performance advantages. Naturally, Fundo Primo is insulating keeping surfaces warmer. Especially when compared to traditional mortar bed installations

or other currently known methods for building showers such as those including use of sheet – or liquid waterproofing membranes used in an attempt to

manage water exposure – wedi Fundo Primo‘s simplicity and high performance shows. The installation combines many manual and separate installation steps

and materials usually needed into very few. Fundo Primo adds speed, safety and consistency to your installation: Measure, possibly cut, thinset to subfloor,

connect drain – done. The most unique advantage, however, is the complete and natural core waterproofness of the wedi product and it’s completeness and

range of components that will form an entire assembly system with Fundo Primo engineered to fit and last. A true system with full warranty coverage. These

added values and its detail perfections eliminate the technical concerns in shower installations. But this is not where wedi shower systems stop offering it’s

added values: The wedi Fundo shower system adds to your productivity and enables you to provide real value to your customers: Our wedi Fundo Shower

systems reduce the installation time for just the shower floor from a 2 – 3 day process (includes drying times) to only 30 minutes when compared to traditional

methods built with pre slope, vinyl liner and final mortar bed. wedi helps you to turn showers into service quicker, cleaner, safer. Especially for our contractors,

Fundo Primo helps to get to setting tile faster and on a much more consistent and tile friendly surface. Customers will appreciate the "no noise and no dirt

and dust" installation. The wedi products do not contain harmful ingredients providing peace of mind to contractors and end users.

12 13

Point Drain Shower Floor Solutions

Drain to Base Assembly

Caulking nut

Rubber caulking gasket

Drain body

wedi Fundo Primo unit

Fiber gasket

2“

Rubber gasket

wedi sealant

Locking nut

Exactly uniform

predefined gradient

Huge variety of design,

function and format

Advantages for the user

save time and money

01 02 04

Cut the 2” pipe flush (or max. 1/8“ above) to the floor construction. Make

sure that the cut out fits to the Fundo panel drain. Cut out a 5 inch diameter

hole around the 2 inch pipe to allow for the wedi drain to be inserted into

the subfloor while the cut out area must remain free of deflection. The

drain and trap have to be sturdily fastened to the sub floor.

Assemble the

drain unit follow ing the instruction drawing.

Set up a continuous 1/4” bead

of wedi sealant along the top

side of the wedi Fundos’ valve

groove profile.

Drop the drain body firmly into

the sealant.

05 06 08

Turn the Fundo base upside

down and apply the rubber

and the fiber gasket.

Tighten the gaskets firmly to

the bases‘ steel ring using the

locking nut. Make sure the

drain body is still safely received

in the valve-bead of sealant.

Skim coat the thinset ANSI 118.4 and comb through with a 1/4” × 1/4”

notched trowel. Channels pointing to the en trance. Trowel the thinset

on the rear side of the Fundo again using a 1/4” × 1/4” notched trowel.

There are different ways to ensure good bond of the wedi base to the

subfloor. Required is a setting bed thickness of min. 3/16“ and max. of

5/16“ (compressed). Applying thinset on both, wedi base and subfloor, is

a best practice recommended to achieve full surface coverage adhesion.

wedi Fundo Primo Installation*

Before Installation:



Have extra 2 × 4 blocking installed over bottom plate between studs

along to support wedi building panel to shower base transition area.



Subfloor is stable, even and loadbearing, and meets deflection criteria

of maximum L/360 and requirements as per IRC. Wooden or concrete

structural substrates are dry and sufficiently loadbearing considering

live and dead load. Wood and Steel framing is sufficiently loadbear-

ing, plum and square.



Floor drain assembly below floor is stabilized, fixed and supported in

position, and will not sink under water load.



Only wedi products (Building Panels, Curb, Joint Sealant and Fasteners)

are used for wedi Fundo Shower System assembly.



Installer has received instructions from wedi technical sales staff or is

informed about proper installation methods as described.



wedi shower bases can be cut to size using a skilsaw. The Z notch

channel must be remade and cleaned from sawdust or other possible

contamination.

* Installations in Australia & New Zealand: Please refer to Installation manuals featuring the applicable job site requirements and wedi drains.

14 15

09 10 12

Press the Fundo firmly into

the thinset bed, ensuring that

the installation is level and

void free. Apply some weight

equally and for at least 30 min-

utes (thinset bags or tile boxes).

Set up the rubber caulking

gasket (with the bevelled side

up) around the 2” pipe in the

subfloor. The rubber gasket

must be flush with the upper

end of the 2” ABS or PVC

pipe.

Do Not use any Lubricants.

Tighten (squeeze) the rubber

caulking gasket firmly with the

caulking nut (use a flat headed

screwdriver) and finally insert

the plastic frame and strainer

on top (without adhesive). The

frame and strainer will be held

in a grout joint only once tiling

commences.

Set up a continuous 1/2” bead

of wedi Joint Sealant along

the pans channel on the outer

perimeter and only in areas

where you can immediately

install a building panel into the

fresh sealant.

13 14

15 16 17 18

Push the wedi panel all the way into the channel of the shower base

channel and its bead of sealant. Smooth out any pushed out sealant on

inside seam using a putty knife. Fasten the panels directly to the studs

starting 1 ft above the base and at a rate of 1 fastener per 1ft. One

extra fastener is set into the seam to the next panel to create a flush

transition.

Apply continuous 1/2” beads of sealant between all connections of panels

and install with thigthly butted seams. Excess sealant must be spread

flat with a putty knife. All seams and fastener heads in the assembly

are covered with a secondary 1/2” bead of sealant and spread flat.

The seams should be covered 1” on either side of seam. All fastener/

washers are covered with sealant stretching 1” over the washer edges.

A continuous 1/2” bead of sealant is set into the channel and along the vertical

curb notch part. A circle of 1/2” sealant bead is set against the wall panels (and)

or the curb sides where the curb attaches. A 1/2” × 1/2” bed of thinset mortar

is applied to the subfloor and a skim coat on the bottom surface of th

e curb

as a best practice. The tightly fitting curb is pressed into the connection

area.

Weight is applied on and against the curb (from outside) and another

1/2” bead of sealant is applied over all curb seams and spread flat. The

seams must be covered 1” either side of a seam.

wedi Niches are installed in a cut out in the wedi wall and attached with

it‘s flange right into the center of 16 o.c. studs. wedi Joint Sealant is set

along the connection of wall to niche. 2 Fasteners each side of the niche

are set to create a flush transition to the wall panels. Another 1/2” bead

of wedi Joint Seal ant is spread over fasteners and seams.

Curb connection notches must be cut to fit select Primo bases

with perimeter thickness higher than 1 1/2”.

For the installation to properly work it is critical to waterproof all

penetrations of the wedi product such as shower valves and shower

heads using the appropriate sealing gaskets for the application. The

wedi Mixing Valve Flexi Collar and wedi Flexi Collar (for 1/2” – 3/4”

shower pipe protrusions) are used for these applications and are

part of the wedi System complete warranty.

wedi Drain Cover Assembly / Insertion

Insert Cover frame into base hole (no glue / no screws). You may caulk between part and tile to create a flexible grout joint. The optional Extension

Collar can be cut to height if part is needed. The caulk joint must not create a water barrier damming up the water draining through the thinset bed

into the drain from below the tile. Therefore the thinset layer must be continuous toward the drain. Use the black plastic extension collar if you need to

raise the wedi frame and cover. Cut extension collar to size and insert below the frame/cover. If not needed, the extension collar may be disposed of as

it is not necessary for the functioning of the wedi installation. Use the black plastic extension collar if you need to raise the wedi frame and cover. Cut

extension collar to size and insert below the frame/cover. If not needed, the extension collar may be disposed of as it is not necessary for the functioning

of the wedi installation.

Cover frame

Optional Extension Collar

wedi Cover

After Installation

All visible joints or seams in the installation are visibly covered and reinforced with wedi joint sealant applied flat over the seams. Coverage of wedi joint

sealant over all seams should be at least 3/4-1 inch on either side of the seam. The joint sealant should be no less than 1/16“ thick for strength. Do not

add mesh tape into the wedi joint sealant. This may only put the waterproof performance at risk and will not strengthen the system‘s resistance against

movement related stresses. Once wedi joint sealant application over all shower system seams has been completed, a water flood test may be performed

as early as 2 hours later. No premixed organic mastic adhesives are used with wedi systems when installed in wet areas. Ceramic tile smaller than 2 x 2“

square may be adhered using a modified thinset mortar and may be grouted using polymer modified cement based grout. Ceramic tiles smaller 1 x 1“

square require adhesion in epoxy thinset mortar and grouting using epoxy grout. Non square tiles must be set accordingly and the shortest side of the

tile determines the appropriate setting materials. Pebble Stones may be set and grouted using both, modified cement based thinset mortars and grouts

or epoxy thinset mortar and grout, or a combination. Larger format tile > 4 inches square may be used on wedi Fundo. They have to be cut for their

grout joints aligning with the wedi shower base slope lines (where slope fields meet).

16 17

Screws and

Washers

Drain unit and

Cover Set

Subliner Dry

Flexi Collars

for pipes and

valves

wedi Full Foam

Curb Lean

wedi Triangle

Corner Seat

(optional)

wedi Building Panel

wedi Fundo Primo

Shower Base

wedi Niche (optional)

Fundo Primo Shower Kit – Full Shower System in a Box

All products needed to build a wedi shower are included and provide a single manufacturer warranty. Safe transportation in one box, easy estimating of

product quantities needed.

wedi Fundo Ligno

Homeowners and builders increasingly favor shower spaces which can function without a curb or would not require any build up over existing floor

areas resulting in a step up into the shower. One important reason for this trend is: easier and safer access to the shower for older and/ or physically

disabled persons. While this trend offers great design and business opportunities it also presents technical challenges which cannot be overcome by many

conventional shower installation methods or products. Main challenges are safe recessing of a sloped shower base into an existing structural floor for a

flush transition and the extension of waterproofing from shower area into surrounding floor areas no longer protected by a curb keeping water inside

the shower area. To address all challenges for tile professionals, wedi engineered Fundo Ligno, a sloped shower base ¾ inches thin at its perimeter and

available in various sizes. Ligno can be field modified. The installation within a ¾” plywood structure requires no cutting into joists. Loadbearing plywood

is simply re-installed between floor joists and over 2 × 6 blocking then attached to the joists. This guarantees a full support and protection of the tiled

surface. The wedi typical strong cement based, reinforced surface is pre-sloped, directly tileable with large or small format tile. Ligno interlocks with

wedi Building Panel used as waterproof backer board on walls as well as on the surrounding floor. Optionally, wedi‘s Subliner Dry Sheet Waterproofing

membrane can be used. Both options offer a complete and professional system installation. wedi Fundo Ligno is designed to provide for a low profile

base thickness of only 3/4”. This allows for a fast and flush installation into a subfloor assembly without cutting into floor joists. The system is designed

to work without a curb. Enjoy the ease of installation without creating a structural hazard because you maintain the structural subfloor panels installed

between floor joists under the wedi Fundo Ligno. Because barrier free showers may be exposed to heavy point loads (e.g. wheel chair), you can confi-

dently rely on the structural strength of the wedi base and subfloor as well as the wedi Fundo's traditional strong cement based surface for ideal tile bond

using any suitable cement based tile adhesives or grouts. As applied to all wedi Fundo Shower Systems, wedi Fundo Ligno is designed to interlock and

work with wedi Building Panels, wedi Joint Sealant, wedi Fasteners, wedi Seats and Benches, wedi Niches and many more accessories, that truly com-

plete your shower installation and waterproofing system. The installation is fast, modular but customizable, and covered by wedi's full system warranty.

Fundo Ligno

recessed

shower base

Under Floor Tile:

wedi Building Panel

or Subliner Sheet

Membrane con-

nected and sealed

to shower base and

wall units

18 19

Caulking nut

Rubber caulking gasket

Drain body

wedi Fundo Ligno

Fiber gasket

2“

Rubber gasket

wedi sealant

Locking nut

Drain to Base Assembly

Point Drain Shower Floor Solutions

Can be combined with

all Fundo drains

Especially for timber

joist floors

Decoupling

effect

01 03

Cut 3/4” Plywood base out fitting the space of wedi Fundo Ligno. Safely

install 2 x 6 blocking along floor joists and in betwen floor joists where

the perimeter of the Ligno base will be located, install 2 x 6 blocking

3/4“ below the top of the floor joists. Adjust for thinset thickness under

wedi Fundo Ligno base and / or the flooring underlayment installation

adjacent to shower area to create a flush transition for waterproofing

and tile between floor and shower area. Re-install 3/4” plywood over

blocking to have the plywood flush with the floor joists and fill with fur-

ring strips on top of floor joists in case the blocking / joist that carry the

plywood under wedi base is installed higher than 3/4” deep from top

of floor joists. Make sure the entire perimeter of the wedi Fundo Ligno

base is supported by floor joists or adequate blocking. Make sure the

plywood base shows no seams where close to the cut out for the wedi

Fundo Ligno drain. The cutout around the center of the 2” floor pipe

must be 6 1/2” (max 7”) in diameter to allow drain recess and must not

create any subfloor deflection. The pipe is cut square and even at 5/8”

below the recessed subfloor top surface.

Assemble the drain unit follow-

ing the instruction drawing.

Set up a continuous 1/4” bead

of wedi Joint Sealant along the

top side of the wedi Fundos’

valve groove profile.

wedi Fundo Ligno Installation*

Before Installation:



Have extra 2 × 4 blocking installed over bottom plate between studs

along to support wedi building panel to shower base transition area.



After recessing or when system is installed over regular subfloor, sub-

floor is stable, even and loadbearing, and meets deflection criteria of

maximum L/360 and requirements as per IRC. Wooden or concrete

structural substrates are dry and sufficiently loadbearing considering

live and dead load. Wood and Steel framing is sufficiently loadbearing,

plum and square.



Floor drain assembly below floor is stabilized , fixed and supported in

position, and will not sink under water load.



Only wedi products (Building Panels, Curb, Joint Sealant and Fasteners)

are used for wedi Fundo Shower System assembly.



Installer has received instructions from wedi technical sales staff or is

informed about proper installation methods as described.



wedi shower bases can be cut to size using a skilsaw. The Z notch

channel must be remade and cleaned from sawdust or other possible

contamination.

* Installations in Australia & New Zealand: Please refer to Installation manuals featuring the applicable job site requirements and wedi drains.

20 21

04 05 07

Drop the drain body firmly into

the sealant.

Turn the Fundo base upside

down and apply the rubber

and the fiber gasket.

Tighten the gaskets firmly to

the bases‘ steel ring using the

locking nut. Make sure the

drain body is still safely received

in the valve-bead of sealant.

Skim coat the thinset ANSI

118.4 and comb through with

a 1/4” × 1/4” notched trowel

channels pointing to the entrance.

08 10 1109

Trowel the thinset on the rear side of the Fundo again using a 1/4” ×

1/4” notched trowel. There are different ways to ensure good bond of

the wedi base to the subfloor. Required is a setting bed thickness of

min. 3/16“ and max. of 5/16“ (compressed). Applying thinset on both,

wedi base and subfloor, is a best practice recommended to achieve full

surface coverage adhesion. Press the wedi Fundo Ligno firmly into the

thinset bed, ensuring that the installation is level and void free. Apply

some weight equally and for at least 30 minutes (thinset bags).

Set up the rubber caulking gas-

ket (with the bevelled side up)

around the 2” pipe in the sub-

floor. The rubber gasket must

be flush with the upper end of

the 2” ABS or PVC pipe.

Do Not use any Lubricants.

Apply continuous 1/2” beads of sealant between all connections of panels

and install with thigthly butted seams. Excess sealant must be spread

flat with a putty knife. All seams and fastener heads in the assembly

are covered with a secondary 1/2” bead of sealant and spread fl

at. The

seams should be covered 1” on either side of seam. All fastener / washers are

covered with sealant stretching 1” over the washer

edges.

Push the wedi panel all the way

into the channel of the shower

base channel and its bead

of sealant. Smooth out any

pushed out sealant on inside

seam using a putty knife. Fasten

the panels directly to the studs

starting 1 ft above the base and

at a rate of 1 fastener per 1ft.

One extra fastener is set into

the seam to the next panel to

crate a flush transition.

Tighten (squeeze) the rubber

caulking gasket firmly with the

caulking nut (use a flat headed

screwdriver) and finally insert

the plastic frame and strainer

on top (without adhesive). The

frame and drain cover will be

held in a grout joint only once

tiling commences.

Set up a continuous 1/2” bead

of wedi Joint Sealant along

the pans channel on the outer

perimeter and only in areas

where you can immediately

install a building panel into the

fresh sealant.

For the installation to properly work it is critical to waterproof all

penetrations of the wedi product such as shower valves and shower

ads using the appropriate sealing gaskets for the application. The

wedi Mixing Valve Flexi Collar and wedi Flexi Collar (for 1/2” – 3/4”

shower pipe protrusions) are used for these applications and are

part of the wedi System complete warranty.

15 16

wedi Niches are installed in a

cut out in the wedi wall and

attached with it‘s flange right

into the center of 16 o.c.

studs. wedi Joint Sealant is set

along the connection of wall

to niche.

2 Fasteners each side of the

niche are set to create a flush

transition to the wall panels.

Another 1/2” bead of wedi Joint

Seal ant is spread over fasteners

and seams.

Apply thinset mortar over wood subfloor and reaching 4” into the wedi

Fundo Ligno shower base. Fill the wedi Fundo Ligno channel with thinset

or a strip of sealed on wedi Building Panel and apply thinset mortar to the

lower corner of the wedi wall panels left and right of any entrance using

1/4” × 1/4” notch trowel.

Apply a modified thinset (ANSI 118.4 or equivalent) across the wood

or cement board floor surface and now apply wedi Subliner Dry Sheet

waterproofing membrane overlapping into the Ligno base for 4 inches.

Apply wedi‘s prefabricated outside or inside sealing tape corners and

sealing tape or Subliner Dry folds as a flashing to the wedi wall panels/

Ligno and Subliner dry sheets as applicable. Install this waterproofing

system over the floor substrate outside the shower. All areas subject to

water splashes and spray must be waterproofed. wedi recommends to

waterproof the entire bathroom floor (including a flashing up into the

wall at least to the height of a regular base board or 2“ high) in spaces

where curbless showers are being installed.

All seams and ends of the Subliner Dry sheets are covered with a 1/2”

bead of wedi Joint Sealant and spread flat using a putty knife. Your

shower is ready for tile once the thinset mortar has hardened! Alter-

natively to Subliner Dry sheet membrane system wedi building panels

in 1/4” or 1/2” thickness can be used as the floor tile underlayment in

lieu of cement board and Subliner waterproofing. wedi Building Panel

would be installed over plywood subfloor and overlap and seal into the

Ligno channel. In such application the Ligno base must be raised to

allow its channel to fully stick out from the recessed area so wedi floor

building panels can be interlocked with its channel. All seams to wedi

walls or Ligno base are sealed internally with wedi Joint Sealant, and are

covered with an external 1/2” bead of wedi Joint Sealant spread flat.

Your shower is ready for tiling once thinset under wedi Subliner Dry or

wedi Building Panels on floor has cured.

22 23

wedi Drain Cover Assembly / Insertion

Insert Cover frame into base hole (no glue / no screws). You may caulk between part and tile to create a flexible grout joint. Optional Extension Collar

can be cut to height if part is needed. The caulk joint must not create a water barrier damming up the water draining through the thinset bed into the

drain from below the tile. Therefore the thinset layer must be continuous toward the drain. Use the black plastic extension collar if you need to raise

the wedi frame and cover. Cut extension collar to size and insert below the frame/cover. If not needed, the extension collar may be disposed of as it

is not necessary for the functioning of the wedi installation. Use the black plastic extension collar if you need to raise the wedi frame and cover. Cut

extension collar to size and insert below the frame/cover. If not needed, the extension collar may be disposed of as it is not necessary for the functioning

of the wedi installation.

Cover frame

Optional Extension Collar

wedi Cover

After Installation

All visible joints or seams in the installation are visibly covered and reinforced with wedi joint sealant applied flat over the seams. Coverage of wedi joint

sealant over all seams should be at least 3/4-1 inch on either side of the seam. The joint sealant should be no less than 1/16“ thick for strength. Do not add

mesh tape into the wedi joint sealant. This may only put the waterproof performance at risk and will not strengthen the system‘s resistance against movement

related stresses. Once wedi joint sealant application over all shower system seams has been completed, a water flood test may be performed as early as

2 hours later, provided a temporary dam has been built for this curbless shower. No premixed organic mastic adhesives are used with wedi systems when

installed in wet areas. Ceramic tile smaller than 2 x 2“ are not used within wedi Fundom Ligno. Tiles in Ligno showers used for wheel chair accessibility

require adhesion in epoxy thinset mortar and grouting using epoxy grout. Non square tiles must be set accordingly and the shortest side of the tile

determines the appropriate setting materials. Larger format tile > 4 inches square may be used on wedi Fundo but have to be cut. They have to be cut

for their grout joints aligning with the wedi shower base slope lines (where slope fields meet).

wedi Fundo Riolito neo

wedi’s pre-sloped shower bases Riolito neo feature fully factory sealed and integrated linear drainage systems. The base itself is naturally waterproof as

well as mold proof, due to its closed cell XPS foam core. The Riolito neo bases come with the wedi typical strong and ready for tiling surface coating. All

Riolito neo shower bases can be field modified. They can be cut to size or extended using wedi‘s pre-sloped Fundo extensions.

The integrated drain in Riolito neo ensures your installation is not exposed to the risk commonly associated with bonding flange design/surface water

proofing installation-type, single drain products. The unique wedi Fundo Riolito neo bases allow water to drain away through a narrow gap between their

drains cover plate and the tile surface finish. wedi Fundo Riolito neo is always equipped with the drain unit but covers are ordered separately. Options for

covers include a polished stainless steel version, a double plated brushed stainless steel version, and a tileable version.

Available in 4-way and 2-way or single slope designs with close to the wall drains, wedi Riolito neo features the industries only factory sealed drain for use

in custom shower configurations. What is more, the Fundo Riolito neo is available in one piece shower base panels or as a modular system offering a

separate drain module and an extension module to combine and configure custom layouts even easier.

Several models with 4 way slope fields provide for a perfect installation when recessing the base into a subfloor where a flush to the floor entry is required.

The second option includes models with a true one way slope towards the linear drain. This latter option is especially designed to accommodate tub to

shower conversions without the need to ever move the floor drain pipe.

24 25

Linear Drain Shower Floor Solutions

wedi’s Fundo Riolito neo linear drain shower bases feature the only fully sealed and factory integrated waterproof drain assembly available in the market

of customizable shower floor systems with linear drainage.

100 % internally waterproof,

mold proof, insulating wedi

XPS closed cell foam core

Multiple sizes with different

sloped designs, bases are

customizable in the field

Fundo Riolito neo employs different drain and drain cover assembly parts. Please refer to the installation manual in the actual product box.

In this section Fundo Riolito neo we are showing the Fundo Riolito neo Drain and Drain Cover parts and assembly.

Several Riolito neo models naturally feature different perimeter height or thickness at the edge. Therefore, pre-made standard notch connections of

wedi curbs must be modified in the field for a tight fit to the bases. Ramps and Extension panels can naturally not fit to all models and might be

modified in the field as well.

Drain to Base Assembly

Sealing collar

Drain body

Curb

Building

Panel

wedi Fundo Riolito neo

Screws

wedi Fundo Riolito neo Installation*

Before Installation:



Have extra 2 × 4 blocking installed over bottom plate between studs

along to support wedi building panel to shower base transition area.



Subfloor is stable, even and loadbearing, and meets deflection criteria

of maximum L/360 and requirements as per IRC. Wooden or concrete

structural substrates are dry and sufficiently loadbearing considering

live and dead load. Wood and Steel framing is sufficiently loadbearing,

plum and square.



Floor drain assembly below floor is stabilized, fixed and supported in

position, and will not sink under water load.



Only wedi products (Building Panels, Curb, Joint Sealant and Fasteners)

are used for wedi Fundo Shower System assembly.



Installer has received instructions from wedi technical sales staff or is

informed about proper installation methods as described.



wedi shower bases can be cut to size using a skilsaw. The Z notch

channel must be remade and cleaned from sawdust or other possible

contamination.

01 02 04

Cut the 2” pipe 1 1/4” below

the top of the Subfloor. Use

the oval shape cutting template

to cut subfloor using a jigsaw

to allow wedi drain trap to

be inserted and connected to

floor pipe using appropriate

ABS compatible or multipur-

pose cement glue. Please also

check cement glue compat-

ibility to floor pipe material.

The drain and trap have to be

secured to the subfloor. Drain

recess cut out must not add

deflection to subfloor. Please

be careful to use the oval

cutting template where your

shower base has it's drain po-

sition. While the template fea-

tures a straight side for easy

aligning with a wall, not all

Riolito's drains have the same

distance to wall framing.

Assemble the drain unit follow-

ing the instruction drawing.

wedi‘s Riolito neo bases can be

cut to size on all sides making

drain positions close to the wall

possible. Please do not cut into

the linear drains plastic flange

integrated into the coated

foam part of the base. Once

cut the 1/2” × 1/2” channels at

the new base perimeter must

be re-established. When cut-

ting close to the drain channel

always leave enough wedi

foam for re-making the

needed 1/2“ × 1/2“ channel.

Glue and seal the wedi drain

trap to the 2” pipe using ap-

propriate solvent cement glue

for the plastics involved. Do

not screw drain body/trap to

floor. Secure with some dabs of

wedi joint sealant under flange

instead. Mount the sealing

collar to the wedi Riolito neo

underside counterpart using

a manual phillips screwdriver.

Apply a skim coat and finally

a combed through bed of a

thinset using modified thin-

set ANSI 118.4 and 1/4” ×

1/4” notch trowel. There are

different ways to ensure good

bond of the wedi base to the

subfloor. Required is a setting

bed thickness of min. 3/16“

and max. of 5/16“ (com-

pressed). Applying thinset on

both, wedi base and subfloor,

is a best practice recommended

to achieve full surface coverage

adhesion.

* Installations in Australia & New Zealand: Please refer to Installation manuals featuring the applicable job site requirements and wedi drains.

26 27

05 06 08

Trowel the thinset on the rear

side of the Fundo again using a

1/4” × 1/4” notch trowel.

Press the Fundo firmly into the

thinset bed, ensuring that the

installation is level and void

free. Ensure wedi drain‘s seal-

ing gasket is firmly inserted in

the wedi trap with no chance

that thinset could have pushed

into this connection area.

Apply some weight equally

and for at least 30 minutes

(thinset bags). Do NOT step on

the drain module to push /con-

nect to drain body or thinset.

Set up a continuous 1/2” bead

of wedi Joint Sealant at the

perimeter channel and only

in areas where you can imme-

diately install a wedi Building

Panel into the fresh sealant.

Push the wedi panel all the way

into the channel of the shower

base channel and its bead of

sealant. Smooth out any pushed

out sealant on inside seam using

a putty knife. Fasten the panels

directly to the studs starting 1

ft above the base and at a rate

of 1 fastener per 1ft. One extra

fastener is set into the seam to

the next panel to crate a flush

transition.

09 10 11

ply continuous 1/2” beads of sealant between all connections of panel

and install with tightly butted seams. Excess sealant must be spread flat

with a putty knife. All seams and fastener heads in the assembly are

covered with a secondary 1/2” bead of sealant and spread flat. The

seams should be covered 3/4” to 1” on either side of seam. All fastener/

washers are covered with sealant stretching 1” over the washer edges.

wedi Niches are installed in

a cut out in the wedi wall

and attached with it‘s flange

right into the center of 16

o.c. studs. wedi sealant is set

along the connection of wall

to niche.

2 Fasteners each side of the

niche are set to create a flush

transition to the wall panels.

Another 1/2” bead of wedi

seal ant is spread over fasteners

and seams.

A continuous 1/2” bead of sealant is set into the channel and along the

vertical curb notch part. A circle of 1/2” sealant bead is set against the

wall panels (and) or the curb sides where the curb attaches. A 1/2” × 1/2”

bed of thinset mortar is applied to the subfloor and just a skimcoat on the

foam bottom part of the curb as a best practice. The tightly cut to fit curb is

pressed into the connection. Weight is applied on and against the curb (from

outside) and another 1/2” bead of sealant is applied over all curb seams and

spread flat. The seams must be covered 3/4” to 1” either side of a seam.

Curb connection notches must be cut to fit select Riolito neo

bases with perimeter thickness higher than 1 1/2“.

For the installation to properly work it is critical to waterproof all

penetrations of the wedi product such as shower valves and shower

heads using the appropriate sealing gaskets for the application. The

wedi Mixing Valve Flexi Collar and wedi Flexi Collar (for 1/2” – 3/4”

shower pipe protrusions) are used for these applications and are

part of the wedi System complete warranty.

See important considerations „After Installation“ in wedi Fundo

Riolito neo Modular manual on the following pages.

wedi Fundo Riolito neo Modular

wedi‘s Fundo Riolito neo System feature the only fully sealed and factory integrated waterproof drain assembly available in the market of customizable

shower floor systems with linear drainage.

They are available in two design options. The first option includes models featuring a one-piece shower base including the drain trench. These provide

1-way or 4-way slopes. The second option, Riolito neo Modular is designed to offer more flexibility as it consists of two basic elements: one module

including the line module which is a trench drain integrate in a wedi base module, the other being a sloped extension panel. Drainage can be installed

close to the wall or two extension models leading away from either side of an i.e. centered drain. The line modules may also be used with mortar bed

shower applications (to be topically waterproofed using wedi Subliner Dry, connecting to the Riolito neo line module).

28 29

Sealing collar

wedi Fundo Riolito neo Modular

Curb

Drain body

Building

Panel

Screws

Linear Drain Shower Floor Solutions

Component 2:

Fundo Riolito neo Extension

Module – 100 % internally

waterproof, mold proof,

insulating wedi XPS closed

cell foam core

Component 1: Fundo Riolito

neo Line Module – Multi-

functional and customizable

to the user‘s demands

Drain to Base Assembly

Cut the 2” pipe 1 1/4” below

the top of the Subfloor. Use

the oval shape cutting template

to cut subfloor using a jigsaw

to allow wedi drain trap to

be inserted and connected to

floor pipe using appropriate

ABS compatible or multipur-

pose cement glue. Please also

check cement glue compat-

ibility to floor pipe material.

The drain and trap have to be

secured to the subfloor. Drain

recess cut out must not add

deflection to subfloor. Please

be careful to use the oval

cutting template where your

shower base has it's drain po-

sition. While the template fea-

tures a straight side for easy

aligning with a wall, not all

Riolito's drains have the same

distance to wall framing.

Assemble the drain unit follow-

ing the instruction drawing.

wedi‘s Riolito neo bases can be

cut to size on all sides making

drain positions close to the wall

possible. Please do not cut into

the linear drains plastic flange

integrated into the coated

foam part of the base. Once

cut the 1/2” × 1/2” channels at

the new base perimeter must

be re-established. When cut-

ting close to the drain channel

always leave enough wedi

foam for re-making the

needed 1/2“ × 1/2“ channel.

Glue and seal the wedi drain

trap to the 2” pipe using ap-

propriate solvent cement glue

for the plastics involved. Do

not screw drain body/trap to

floor. Secure with some dabs of

wedi joint sealant under flange

instead. Mount the sealing collar

to the wedi Riolito neo Modular

underside counterpart using a

manual phillips screwdriver.

wedi Fundo Riolito neo Modular Installation*

Before Installation:



Have extra 2 × 4 blocking installed over bottom plate between studs

along to support wedi building panel to shower base transition area.



Subfloor is stable, even and loadbearing, and meets deflection criteria

of maximum L/360 and requirements as per IRC. Wooden or concrete

structural substrates are dry and sufficiently loadbearing considering

live and dead load. Wood and Steel framing is sufficiently loadbear-

ing, plum and square.



Floor drain assembly below floor is stabilized, fixed and supported in

position, and will not sink under water load.



Only wedi products (Building Panels, Curb, Joint Sealant and Fasten-

ers) are used for wedi Fundo Shower System assembly.



Installer has received instructions from wedi technical sales staff or is

informed about proper installation methods as described.



wedi shower bases can be cut to size using a skilsaw. The Z notch

channel must be remade and cleaned from sawdust or other possible

contamination.

01 02 0403

Apply a skim coat and finally

combed through bed of a thins

using modified thinset ANSI

118.4 and 1/4” × 1/4” (6 mm

× 6 mm) notch trowel. There

are different ways to ensure

good bond of the wedi base

to the subfloor. Required is a

setting bed thickness of min.

3/16“ and max. of 5/16“ (com-

pressed). Applying thinset on

both, wedi base and subfloor,

is a best practice recommended

to achieve full surface coverage

adhesion. wedi recommends

to cut and dry fit both floor

modules to shower stall size

and drain location.

* Installations in Australia & New Zealand: Please refer to Installation manuals featuring the applicable job site requirements and wedi drains.

30 31

05 06 08

Trowel the thinset on the rear side of the Fundo Riolitio neo Module

“Drain” again using a 1/4” × 1/4” (6 mm × 6 mm) notch trowel.

Press the

Fundo Riolito neo Module „Line Drain“ into the thinset so that the sealing

gasket moves smoothly into the drain body without contamination through

thinset. Make sure the entire wedi cement coated underside of the drain

module will have thinset support/coverage. Do NOT step on the drain mod

ule to push /connect to drain body or thinset. Apply a 1/2” (13 mm) bead

of wedi Joint Sealant to the module‘s Z notch channel and insert the second

module, the “Extension”. The Module “Extension”, once cut to length, is

also installed using thinset mortar and using the same technique as shown

under 4. Apply a 1/2” (13 mm) bead of wedi joint sealant over the seam

between both modules and spread flat using a putty knife. Apply weights.

Set up a continuous 1/2” (13 mm)

bead of wedi Joint Sealant

the perimeter channel and

only in areas where you can

immediately install a wedi

Building Panel into the fresh

sealant.

Push the wedi Building Panel

all the way into the channel of

the shower base channel and

its bead of sealant. Smooth

out any pushed out sealant on

inside seam using a putty knife.

Fasten the panels directly to the

studs starting 1 ft (300 mm)

above the base and at a rate

of 1 fastener per 1ft (300 mm).

One extra fastener is set into the

seam to the next panel to crate

a flush transition.

09 10 11

Apply continuous 1/2” (13 mm) bead of sealant between all connections

of panels and install with tightly butted seams. Excess sealant must be

spread flat with a putty knife. All seams and fastener heads in the assembly

are covered with a secondary 1/2” (13 mm) bead of sealant and spread

flat. The seams should be covered 3/4” to 1” (19 mm to 25 mm) on either

side of seam. All fastener/washers are covered with sealant stretching 1”

(25 mm) over the washer edges.

wedi Niches are installed in a

cut out in the wedi wall and

attached with it‘s flange right

into the center of 16 o.c.

(406 mm) studs. wedi Joint

Sealant is set along the con-

nection of wall to niche.

2 Fasteners each side of the

niche are set to create a flush

transition to the wall panels.

Another 1/2” (13 mm) bead

of wedi seal ant is spread over

fasteners and seams.

A continuous 1/2” (13 mm) bead of sealant is set into the channel and

along the vertical curb notch part. A circle of 1/2” (13 mm) sealant bead is

set against the wall panels (and) or the curb sides where the curb attaches.

A 1/2” × 1/2” (13 mm × 13 mm) bed of thinset mortar is applied to the

subfloor. The tightly cut to fit curb is pressed into the connection. Weight

is applied on and against the curb ( from the outside) and another 1/2”

(13 mm) bead of sealant is applied over all curb seams and spread flat. The

seams must be covered 3/4” to 1” (19 mm to 25 mm) either side of a seam.

Curb connection notches must be cut to tightly fit

select Riolito neo bases.

For the installation to properly work it is critical to waterproof all

penetrations of the wedi product such as shower valves and shower

heads using the appropriate sealing gaskets for the application. The

wedi Mixing Valve Flexi Collar and wedi Flexi Collar (for 1/2” – 3/4”

shower pipe protrusions) are used for these applications and are

part of the wedi System complete warranty.

Installation instructions wedi Fundo Riolito neo / Riolito neo Modular Drain Cover

After Installation

All visible joints or seams in the installation are visibly covered anmd reinforced with wedi joint sealant applied flat over the seams. Coverage of wedi

joint sealant over all seams should be at least 3/4-1 inch on either side of the seam. The joint sealant should be no less than 1/16“ thick for strength.

Do not add mesh tape into the wedi joint sealant. This may only put the waterproof performance at risk and will not strengthen the system‘s resistance

against movement related stresses. Once wedi joint sealant application over all shower system seams has been completed, a water flood test may be

performed as early as 2 hours later. No premixed organic mastic adhesives are used with wedi systems when installed in wet areas. Ceramic tile smaller

than 2 x 2 „ square may be adhered using a modified thinset mortar and may be grouted using polymer modified cement based grout. Ceramic tiles

smaller 1 x 1“ square require adhesion in epoxy thinset mortar and grouting using epoxy grout. Non square tiles must be set accordingly and the shortest

side of the tile determines the appropriate setting materials. Pebble Stones may be set and grouted using both, modified cement based thinset mortars

and grouts or epoxy thinset mortar and grout, or a combination. Larger format tile > 2 inches square may be used on wedi Fundo Riolito neo. They

may have to be cut for their grout joints aligning with the wedi shower base slope lines if present, depending on model used (where slope fields meet).

Drain Cover Fundo Riolito neo stan-

dard: High Grade Polished Stainless

Steel Standard Version

Drain Cover Fundo Riolito neo exclu-

sive: High Grade Double Plated Stain-

less Steel Version

Drain Cover Fundo Riolito neo

tileable: Can be tiled with epoxy glue/

adhesive or wedi joint sealant. Can be

used for 1/4” and 1/2” tile / stone (re-

verse cover)

Drain cover can be adjusted from

+ 5 mm to + 25 mm from Riolito neo

base surface. The cover supports may

be extended out to needed height

using the allen key included in box.

The supports may also be cut shorter

along prefabricated cutting lines be-

fore assembly with allen key.

Linear channel cover standard and exclusive

01 02 0403

CLICK!

5 – 25 mm

32 33

X+1 mm

5 – 25 mm

CLICK!

05 06 0807

09 10 11

X+1 mm

Linear channel cover tileable

01 02 0403

05 06 0807

09 10 11

wedi Sanoasa Benches

Comfort means something different to each person. The feeling of quiet and relaxation when sitting in the shower, though, is a very pleasant expe-

rience for everyone. The wedi Sanoasa benches provide plenty of space to comfortably relax, pampering both your body and mind in your own small

wellness temple. The smart construction enables an unequalled freedom of visual design; both the seating areas and the carrier elements can not only

be positioned the way you like, but also their shapes and sizes can be modified to suit. The benches attach to shower wall and floor surfaces using wedi

Joint Sealant or, where a gap opens to the floor due to a sloped shower floor, thinset is used to fill the gap and mesh tape is applied over the thinset

application or floor to bench seam.

Highly stable carrier element,

available in two widths

Bench element

with slopes

100% waterproof XPS core

34 35

More wedi Prefabricated Shower Seats and Benches

wedi prefabricated shower seats and benches install much quicker and easier than metal tray or concrete seats. Plus, they bond well to thinset mortar

and are 100 % waterproof due to the extruded polystyrene closed cell foam core which is manufactured without the use of CFC and contains no HBCD.

They will not cause efflorescence or discolorations or waterproofing issues as frequently observed with products including those requiring mortar fills.

Create the perfect waterproof seating solution for your shower. wedi Prefabricated Suspended Corner Seats do not require additional blocking installed

in the framing. Their mounting brackets are fastened into existing wall studs.

Very strong: handles

loads up to 350 lbs

Specialty Applications – the wedi building panel as solution

Round and curved walls

Create a series of cuts into the wedi Building Panels 1/2 the thickness of

the panel deep. The distance between cuts depends on the tightness of

the radius needed later. Use a circular saw for these cuts. A wide range

of other shapes are possible using the wedi Building Panel. All you need

is a template shaped to suit your needs. A template may not be needed

for simpler shaping.

Cut the wedi Building Panel using a utility knife and straight edge. This

way wave shape constructions can be produced. For a small radius –

cut out wedges from the building panel or cut the wedi Building Panel

using a hand-held circular saw and bend it into a curve.

A01 B02

Installation of wedi Vapor Barrier in wedi steam room applications

01 0302 04

approximately 30 minutes in between the two coats is required. Each

coat should be 8 mils thick (wet thickness=dry thickness) for a total of

16 mils (wet thickness = dry thickness) for the complete application.

The surface is ready for tiling using an epoxy mortar according to ANSI

118.3 or a cement based , modified thinset mortar according to ANSI

118.4 (must be recommended for extreme wet areas with frequent and

strong temperature changes) only 3 1/2 hours after final application of

the second wedi vapor barrier coat. Tiling must be completed within 5

days maximum after application of the final, second coat has been left

to cure for 3 ½ hours. If tiling must commence later, the surface has to

be roughened for best adhesion using fine sandpaper and cleaning off

the dust later. A new surface coat of the wedi vapor barrier must be

installed as a primer surface up to 8 mil thick. The primer coat must be

allowed to dry for 3 1/2 hours and again can be tiled over within 5 days.

Apply over all wedi inside surfaces in steam rooms prior to tiling. Vapor

Barrier Components A and B are supplied in pre-measured quantities.

Add Comp. B to Comp. A by piercing a hole through the top (rubber

membrane) and the bottom of Component B. Assure that Component

B completely flows out of the container. Always mix a complete kit in

the proportions supplied. Do not alter mixing ratios. Only mix what

you can apply within pot life. Stir mixture for approx. 5 minutes to

a homogenous, streak free consistency, using a slow speed drill (ap-

prox. 300 rpm) with a clean Polished Steel Jiffy blade. Avoid entrap-

ping air. Ensure that the material at the bottom and sides of the pail

is agitated well. After mixing, pour it into a clean metal container and

carefully mix it again for additional 30 seconds. Make sure not to mix

too fast to avoid trapping air. Pour fully mixed product into a metal

painters tray .Apply to the clean wedi substrate, by non-shed roller or

notched squeegee. A thorough 2-Coat Application with a dry time of

36 37

Specialty Applications – the wedi building panel as solution

Building Custom Seats and Benches Using 1 1/2" or 2" thick wedi Building Panels

wedi offers prefabricated suspended or wall mounted seats and floor

standing seats. Both may also be constructed on site using wedi Buil-

ding Panels. This is an ideal option that will perfectly accommodate your

individual tile and design layout.

01 02 03

Installation on tub walls

Measure and cut wedi Building Panel to fit the 16 inch o.c. framework

(wood or metal). Notch out all panels if installed around the perimeter

of a flange tub to integrate the flange and achieve a plumb wall with

square and tight corners.

Attach a notched panel to the framework with a 1/2” bead of wedi

Joint Sealant between the notch and flange. Attach the panel to the

framework using wedi Washers and Screws at a rate of 1 every 12 in-

ches along the studs. Leave a gap of 1/8" between tub edge and wedi

panel bottom end to allow for movement of the tub. Alternatively apply

a bead of wedi Joint Sealant in between both materials.

Apply a continuous 1/2" bead of wedi Joint Sealant on the top blue

foam edge of the wedi Building Panel before installing the next panel,

butting tightly into the sealant. Set another wedi Washer and Screw

into the seam to create a flush transition between panels and smooth

over excess sealant. When installing a wedi side panel against the al-

ready fixed wedi back wall, apply a continuous 1/2" bead of wedi Joint

Sealant vertically on the back wall wedi panel where both panels will

meet. Apply compression to the wedi Joint Sealant when moving the

wedi side panel into position before fastening it. Finally and after all

wedi Building Panels are installed a second 1/2” bead of wedi Joint

Sealant is applied over all seams and fastener points and spread flat

using a putty knife.

01 02

Properties & Test Methods Value (wedi Building Panel and Fundo Shower System Components)

Thermal Conductivity 75°F (25°C) – ASTM C518 0.23 Bbtu in/hr F

Tensile Strength ASTM C297 65 psi

Shear Strength Under conditions required in ANSI A118.10-1999 54 psi

Waterproof ASTM D4068 / ANSI A118.10-1999 Passed

Capillarity 0

R-Value 75°F (25°) – ASTM C518 4.3hr ft. 2 F/Btu/in (R Value for 1” wedi = 4.3)

Flexural Strength ASTM C947 627 psi

Robinson Floor Test ASTM C627 Heavy duty commercial use, passed

Fastener Pull Through ASTM C473 Wet 131.8 psi/Dry 196.2 psi

Temperature Limits -58 / +175° F

Freeze & Thaw ASTM C666 – 25 Cycles No disintegration/change

Waterproofness of Assembly ASTM E331

Passed, wedi Fundo Kit assembly (complete sytsem)

Fungus / Bacteria Resistance ASTM G21 Passed, No Growth

Accelerated Aging AC 71 – 25 Cycles No disintegration

UL 1715 Fire Test of interior Finish Material Passed, ame spread <10

Linear Variation AC 159 / ASTM 1037-39 Passed, less than 0.07%

Surface Burning Characteristics ASTM E 84-04 Flame Spread of 10 or less

Smoke Developed Index of 95

Floor and Trench Drain Compliance ASME A112.18.2 Passed, Compliant (ICC PMG 1189)

Weight for wedi Building Panels Width Length Thickness Weight

3’ 5’ 1/4” 8.07 lb.

3’ 5’ 1/2” 8.67 lb.

Technical Properties  wedi Systems

WEDI FUNDO SHOWER SYSTEM AND TILE BACKER BOARD UNDERLAYMENTS

Compliance with the

following codes

2015, 2012 and 2009 International Plumbing Code

(IPC)

2015, 2012 and 2009 International Residential Code

(IRC)

2015, 2012 and 2009 International Building Code

(IBC)

2015, 2012 and 2009 National Standard Plumbing Code

(NSPC)

2015, 2012 and 2009 Uniform Plumbing Code

(UPC)*

2015, 2010 and 2005 National Plumbing Code of Canada**

* Uniform Plumbing Code is a copyrighted publication

if the International Association of Plumbing and Mechanical Ofcials

** National Plumbing Code of Canada is a copyrighted publication

of National Research Council Canada

Compliance with the

following standards

ANSI A 118.10-2014, Load Bearing, Bonded, Waterproof Membranes

for Thin-Set Ceramic Tile and Dimension Stone Installations

ASME A 112.6.3-2016, Floor and Trench Drains

ICC-ES EG 159, Evaluation Guideline for Composite Backer Board (Approved Dec 2004)

ICC-ES AC 71, Acceptance Criteria for Foam Plastic Sheathing Panels Used as Water Resistive

Barriers (Approved Feb 2003, Ed Revised Nov 2013)

IAPMO PS 46-2012, Field-Fabricated Tiling Kits

IAPMO PS 106-2015e1, Tileable Shower Receptors and Shower Kits

ICC-PMG 1189 Report  National Building Code Compliances

38 39

PRO

20 years warranty for a

wedi bathroom system

wedi PRO Certification and 15 / 20 Year Warranty Program

In certain circumstances, in lieu of the foregoing 10-Year Limited Warranty, wedi offers a 15-Year Limited Warranty and 20-Year Limited Warranty, pur-

suant to which wedi warrants the Products shall be free of manufacturing defects and conform to wedi’s published specifications for a total of either

15 years or 20 years when installed as part of a “15-Year Warranty Installation” or “20-Year Warranty Installation,” by a “PRO Certified Installer,” in a

“Registered Installation”. Find Details on wedi’s 15/20 Year Warranty Options on www.wedicorp.com.

 wedi’s performance shower systems and its

unprecedented warranty coverage and service

meet great wedi installers

 Sign up for the wedi Pro Certification Classes

– and enjoy wedi’s 15 or 20 year full package

warranty options

15 years warranty for

a wedi shower system

Description Width x Length x Thickness Unit/Palette Item #

Retail Price

wedi Building Panel

3’ x 5’ x 1/4” (914 x 1524 x 6 mm)

50 panels = 750 sq. ft. 010718006 $ 53.07

wedi Building Panel

3’ x 5’ x 1/2” (914 x 1524 x 12.7 mm)

50 panels = 750 sq. ft. 010717064 $ 55.46

wedi Building Panel

2’ x 4’ x 1/8” (600 x 1200 x 4 mm)

136 panels = 1,088 sq. ft.

010000004 $ 28.01

wedi Building Panel

3’ x 5’ x 5/8” (914 x 1524 x 15.8 mm)

50 panels = 750 sq. ft. 010716316 $ 68.56

wedi Building Panel

2’ x 8’ x 1” (600 x 2500 x 25.4 mm)

56 panels = 896 sq. ft. 010719325 $ 77.87

wedi Building Panel

2’ x 8’ x 3/4” (600 x 2500 x 20 mm)

50 panels = 800 sq. ft. 010000020 $ 70.45

wedi Building Panel

2’ x 8’ x 1 1/4” (600 x 2500 x 30 mm)

36 panels = 576 sq. ft. 010000030 $ 79.31

wedi Building Panel

2’ x 8’ x 1 1/2” (600 x 2500 x 40 mm)

36 panels = 576 sq. ft. 010000040 $ 93.83

wedi Building Panel

2’ x 8’ x 2” (600 x 2500 x 50 mm)

24 panels = 384 sq. ft. 010000050 $ 99.00

wedi Building Panel

2’ × 8’ × 3 1/15” (600 × 2500 × 80 mm)

12 panels = 192 sq. ft.

010710080

(special order only)

$ 119.36

wedi Building Panel

2’ × 8’ × 3 9/10” (600 × 2500 × 100 mm)

20 panels = 320 sq. ft.

010710199

(special order only)

$ 151.72

wedi Building Panel

Description Width x Length x Thickness Unit/Palette Item #

Retail Price

wedi Building Panel XL

3’ x 8’ x 1/2” (900 x 2500 x 12.5 mm) 26 panels = 624 sq. ft.

010000912 $ 92.60

wedi Building Panel XXL

4’ x 8’ x 1/2” (1200 x 2600 x 12.5 mm) 26 panels = 858 sq. ft.

010001612 $ 138.63

wedi Building Panel XXL

4’ x 8’ x 2” (1200 x 2500 x 50 mm) 12 panels = 396 sq. ft.

010001250 $ 239.52

wedi Building Panel XL & XXL

Description Dimensions Unit Item #

Retail Price

wedi Fundo Primo, square 36” × 36” incl. drain (914 × 914 mm) 1 pc 073735507 $ 460.76

wedi Fundo Primo, square 48” x 48” incl. drain (1220 × 1220 mm) 1 pc 073735505 $ 638.60

wedi Fundo Primo, square 60” x 60” incl. drain (1524 × 1524 mm) 1 pc 073735518 $ 1,116.52

wedi Fundo Primo, square 72” x 72” incl. drain (1830 × 1830 mm) 1 pc 073735524 $ 1,639.76

wedi Fundo Primo, rectangular

36” x 48” incl. drain (914 × 1220 mm) 1 pc 073735516 $ 587.10

wedi Fundo Primo, rectangular

36” x 60” incl. drain (914 × 1524 mm) 1 pc 073735506 $ 627.27

wedi Fundo Primo, rectangular

48” x 60” incl. drain (1220 × 1524 mm) 1 pc 073735509 $ 831.21

wedi Fundo Primo, rectangular

48” x 72” incl. drain (1220 × 1830 mm) 1 pc 073735508 $ 983.65

wedi Fundo Primo, rectangular

60” x 72” incl. drain (1524 × 1830 mm) 1 pc 073735519 $ 1,322.52

wedi Fundo Primo, rectangular

48” x 84” incl. drain (1220 × 2134 mm) 1 pc 073735522 $ 1,268.96

wedi Fundo Primo, rectangular

60” x 84” incl. drain (1524 × 2134 mm) 1 pc 073735523 $ 1,586.20

wedi Fundo Primo, rectangular

36” x 72” incl. drain (914 × 1830 mm) 1 pc 073735525 $ 667.44

wedi Fundo Primo | Square and Rectangular Shower Bases, Center Drain

wedi Fundo elements vary in thickness from 1 1/2” to 2” at the perimeter. When working with modular wedi curbs

or ramps the connection notch might need to be adjusted in the field.

Equipped with Drain Unit and Cover Set Brushed Stainless Steel.

40 41

Description Dimensions Unit Item #

Retail Price

wedi Fundo Primo,

rectangular, offset drain 36” x 72” incl. drain (914 × 1830 mm) 1 pc 073735521 $ 667.44

wedi Fundo Primo | Rectangular Shower Base, Offset Drain

For tub replacement installations.

Cut unit to always meet drain and shower size.

Equipped with Drain Unit and Cover Set Brushed Stainless Steel.

Description Dimensions Unit Item #

Retail Price

wedi Fundo Ligno, square 48“ x 48“ x 3/4“ (1220 × 1220 × 19 mm) 1 pc 073732015 $ 772.50

wedi Fundo Ligno, square 60“ x 60“ x 3/4“ (1524 × 1524 × 19 mm) 1 pc 073732018 $ 1,336.94

wedi Fundo Ligno, rectangular

36“ x 48“ x 3/4“ (914 × 1220 × 19 mm) 1 pc 073732014 $ 716.88

wedi Fundo Ligno, rectangular

36“ x 60“ x 3/4“ (914 × 1524 × 19 mm) 1 pc 073732016 $ 762.20

wedi Fundo Ligno, rectangular

48“ x 60“ x 3/4“ (1220 × 1524 × 19 mm) 1 pc 073732017 $ 1,019.70

wedi Fundo Ligno | Square and Rectangular Shower Bases, Center Drain

wedi Fundo Primo Shower Kit

Description Dimension Unit Item #

Retail Price

wedi Fundo Primo Shower Kit 36” x 36” center drain (914 × 914 mm) 1 pc US2000002 $ 881.02

wedi Fundo Primo Shower Kit 36” x 48” center drain (914 × 1220 mm) 1 pc US2000007 $ 1,124.76

wedi Fundo Primo Shower Kit 48” x 48” center drain (1220 × 1220 mm) 1 pc US2000004 $ 1,231.88

wedi Fundo Primo Shower Kit 36” x 60” center drain (914 × 1524 mm) 1 pc US2000003 $ 1,165.96

wedi Fundo Primo Shower Kit 36” x 72” center drain (914 × 1830 mm) 1 pc US2000001 $ 1,205.10

wedi Fundo Primo Shower Kit 36” x 72” offset drain (914 × 1830 mm) 1 pc US2000008 $ 1,205.10

wedi Fundo Primo Shower Kit 48” x 60” center drain (1220 × 1524 mm) 1 pc US2000005 $ 1,435.82

wedi Fundo Primo Shower Kit 48” x 72” center drain (1220 × 1830 mm) 1 pc US2000006 $ 1,645.94



Wall height 80”



1 wedi Fundo Pan



wedi Building Panels to cover up to (3) 80” walls



1 drain assembly



1 Full Foam Curb Lean



wedi Joint Sealant



Fasteners



wedi putty knife



wedi Flexi Collar



wedi Mixing Valve Flexi Collar



Slope extends over 24” or 12” direction of either extension panel and pre-grooved



Extension panels are designed to interlock with Fundo Primo bases and 4 way slope Fundo Riolito neo bases. The

installation height must be increased if connected to Fundo and Ligno shower bases thicker than 1 1/2” at perimeter.

wedi Fundo / Pre-Sloped Extension Panels

Description Width x Length x Thickness Unit Item #

Retail Price

wedi Shower Base Extension 24” x 48”, sloped 1/4”/ft.

(609.8 × 1219.2 mm, sloped 6 mm in 30 mm)

sheet

073783528 $ 229.78

wedi Shower Base Extension

Lean

12” x 72”, sloped 1/4”/ft.

(304.8 × 1828.8 mm, sloped 6 mm in 30 mm)

sheet

073783523 $ 158.00

wedi Fundo Ligno Extension

Panel

12” x 60”, sloped 1/4”/ft.

(304.8 x 1524 mm, sloped 6 mm in 30 mm)

sheet

073732030 $ 176.18



For use in Compression Fit Drain units



Specialty Gaskets available upon request

Description Unit Item #

Retail Price

Special Rubber Caulking Gasket for Cast Iron Pipe Connection 1 pc US5000030 $ 18.09

Special Rubber Caulking Gasket for Copper Pipe Connection 1 pc US5000031 $ 18.09

wedi Fundo Drain Accessories | 2” Sealing Gasket



For this drain cover, the height of your tiling must be at least 1/4”.



For use with wedi Fundo Primo, Ligno, Trollo, Nautilo bases.



The Standard Drain Cover included in Fundo Systems Primo/Ligno/Trollo/Nautilo is US1000009



1 drain cover, stainless steel



1 frame, stainless steel

wedi Fundo Standard | Drain Cover, Stainless Steel Base

Description Width x Length Unit Item #

Retail Price

wedi Fundo Drain Cover Set,

Brushed Stainless Steel 4” x 4” (102 × 102 mm) 1 pc US1000009 $ 64.27

wedi Fundo Drain Cover Set,

Brushed Stainless Steel with Screws 4” x 4” (102 × 102 mm) 1 pc US1000029 $ 64.27

wedi Fundo Drain Cover Set,

Oil Rubbed Bronze 4” x 4” (102 × 102 mm) 1 pc US1000008 $ 70.97

Description Unit Item #

Retail Price

Heavy Duty Drain Wrench 1 pc US5000032 $ 16.07

wedi Fundo Drain Wrench

Support tool used to tighten wedi Fundo Primo compression fit rubber gaskets

Description Unit Item #

Retail Price

wedi Fundo Drain Kit Standard, ABS, Compression Fit 1 pc US1000003 $ 77.66

wedi Fundo Drain Kit ; Brass, Compression Fit 1 pc US1000004 $ 92.39

wedi Fundo Glue Drain Kit, ABS 1 pc US1000007 $ 77.66

wedi Fundo Compression Fit Drain Unit 1 pc US1000012 $ 10.71

wedi Fundo Brass Compression Fit Drain Unit 1 pc US1000011 $ 32.96

wedi Fundo Glue Drain, ABS 1 pc US1000010 $ 13.39

wedi Angle Drain 1 pc US1000027 $ 117.34

wedi Fundo Drain Units & Kits Standard | Drain, PVC, ABS and Brass



Drain Units connect to Schedule 40 pipe



Compression Fit Drain units can be used with ABS/PVC pipe



Glue Drain units can be used with ABS floor pipe



Items sold as Kit contain Drain unit, extension collar and Cover Set standard



For Fundo Primo and Ligno

42 43

Description Unit Item #

Retail Price

wedi Fundo Fino Cover Set 1.1,

square 4“ x 4“ (102 × 102 mm) (Daisy Design)

1 pc

US1000021

$ 110.00

wedi Fundo Fino Cover Set 1.1.2,

round (Daisy Design)

1 pc

US1000023

$ 110.00

wedi Fundo Fino Cover Set 1.3,

square 4“ x 4“ (

102 × 102 mm

)

w. Screws (Daisy Design)

1 pc

US1000022

$ 110.00

wedi Fundo Fino Cover Set 3.1,

square 4“ x 4“ (102 × 102 mm) (Pebbles Design)

1 pc

US1000024

$ 110.00

wedi Fundo Fino Cover Set 3.1.2,

round (Pebbles Design)

1 pc

US1000026

$ 110.00

wedi Fundo Fino Cover Set 3.3,

square 4“ x 4“ (

102 × 102 mm

)

w. Screws (Pebbles Design)

1 pc

US1000025

$ 110.00

wedi Fundo Fino Tileable Cover Plate,

square 4“ x 4“ (102 × 102 mm)

1 pc

US1000020

$ 110.00

wedi Fundo Fino Stainless Steel Cover,

4" x 4" (102 × 102 mm)

/ w. Screws

1 pc

US1000029

$ 64.27

wedi Fundo Fino | Optional Design Covers, Stainless Steel Brushed

Set 1.1

Set 3.1

Set 3.1.2

Set 1.1.2

wedi Fundo Fino

Tileable Cover Plate

Description External Dimensions

Length x Width x Height

Channel

Length

Item #

Retail Price

wedi Fundo Riolito neo, oor

base, with channel drain

36” x 60” x 2 3/8“ incl. drain,

four-way slope (914 × 1524 × 51 mm)

43 5/16”

(1100 mm) 075100016 $ 819.00

wedi Fundo Riolito neo, oor

base, with channel drain

48” x 60” x 2 1/2“ incl. drain,

four-way slope (1220 × 1524 × 63 mm)

27 1/2”

(700 mm) 075100012 $ 1,038.70

wedi Fundo Riolito neo, oor

base, with channel drain

48” x 72” x 2” incl. drain,

four-way slope (1220 × 1830 × 51 mm)

43 5/16”

(1100 mm) 075100014 $ 1,168.70

wedi Fundo Riolito neo, oor

base, with channel drain

32” x 72” x (2 3/4” – 1 3/8”)

incl. drain, single slope (one-way slope)

(813 × 1830 × 63 – 35.4 mm)

27 1/2”

(700 mm) 075100015 $ 830.00

wedi Fundo Riolito neo, oor

base, with channel drain

32” x 72” x 2 3/4” incl. drain,

two-way slope, drain 12” offset

27 1/2”

(700 mm) 075100035 $ 830.00

wedi Fundo Riolito neo | Shower Base, with Integrated Channel Drain



For use with wedi Fundo Primo, Ligno, Trollo, Nautilo bases.



Tileable cover plate surface is elevated 1/16“ over tile surface of a Fundo base. For a flush tile installation,

wedi joint sealant spot bonding may be used to install the tile inside the cover so height is reduced versus

the thinset bed build up under the tile on the shower base.



1 drain cover, stainless steel



1 Frame, stainless steel

Description External Dimensions

Length x Width x Height

Channel

Length

Item #

Retail Price

wedi Fundo Riolito neo

Modular, line module

32” × 5 3/4” (813 × 146 mm)

Height Line Module: 1 3/8“ (35.4 mm)

27 1/2“

(700 mm) 075100052 $ 300.00

wedi Fundo Riolito neo

Modular, line module

48” × 5 3/4” (1220 × 146 mm)

Height Line Module: 1 3/8” (35.4 mm)

43 5/16“

(1100 mm) 075100053 $ 360.00

wedi Fundo Riolito neo

Modular, extension module

32” × 66 3/4” (813 × 1700 mm)

Height Line Module:

1 3/8” (35.4 mm) – 2 3/16” (55.6 mm)

–

075100050 $ 510.00

wedi Fundo Riolito neo

Modular, extension module

48” × 66 3/4” (1200 × 1700 mm)

Height Line Module:

1 3/8” (35.4 mm) – 2 3/16” (55.6 mm)

–

075100051 $ 680.00

wedi Fundo Riolito neo Modular | Shower Base, with Integrated Channel Drain

Description Width x Length x Height Unit Item #

Retail Price

wedi Fundo Riolito neo Tileable drain cover for

36” x 60” and 48” x 72“ Riolito neo base (914

× 1524 mm and 1220 × 1830 mm)

1 5/8” × 43 1/4” × 3/4”

(41 × 1100 × 19 mm) 1 pc 676797047 $ 388.70

wedi Fundo Riolito neo Tileable drain cover

for 48” x 60” and 32” x 72” Riolito neo base

(1220 × 1524 mm and 813 × 1830 mm)

1 5/8” × 27 5/8” × 3/4”

(41 × 700 × 19 mm) 1 pc 676797050 $ 357.50

wedi Fundo Riolito neo Tileable | Cover Plate, Stainless Steel

For tile installation heights of between 3/16” to 1”.

Reverse for thinner or thicker tile.

For Fundo Bases Riolito neo and Riolito neo Modular.

Description Width x Length x Height Unit Item #

Retail Price

wedi Fundo Riolito neo Exclusive drain cover for

36” x 60” and 48” x 72“ Riolito neo base (914

× 1524 mm and 1220 × 1830 mm)

1 5/8” × 43 1/4” × 3/4”

(41 × 1100 × 19 mm) 1 pc 676797046 $ 388.70

wedi Fundo Riolito neo Exclusive drain cover

for 48” x 60” and 32” x 72” Riolito neo base

(1220 × 1524 mm and 813 × 1830 mm)

1 5/8” × 27 5/8” × 3/4”

(41 × 700 × 19 mm) 1 pc 676797049 $ 357.50

wedi Fundo Riolito neo Exclusive | Cover Plate, Stainless Steel

For tile installation heights of between 3/16” to 1”

For Fundo Bases Riolito neo and Riolito neo Modular.

Description Width x Length x Height Unit Item #

Retail Price

wedi Fundo Riolito neo Standard drain cover

for 36” x 60” and 48” x 72“ Riolito neo base

(914 × 1524 mm and 1220 × 1830 mm)

1 5/8” × 43 1/4” × 3/4”

(41 × 1100 × 19 mm) 1 pc 676797045 $ 190.00

wedi Fundo Riolito neo Standard drain cover

for 48” x 60” and 32” x 72” Riolito neo base

(1220 × 1524 mm and 813 × 1830 mm)

1 5/8” × 27 5/8” × 3/4”

(41 × 700 × 19 mm) 1 pc 676797048 $ 146.00

wedi Fundo Riolito neo Standard | Cover Plate, Stainless Steel

For tile installation heights of between 3/16” to 1”

For Fundo Bases Riolito neo and Riolito neo Modular.

wedi Fundo Riolito neo Shower Kit

Description Dimension Unit Item #

Retail Price

wedi Fundo Riolito neo

Shower Kit

32” x 72” One-Sided Slope

(660 × 1830 mm)

1 pc

US4000010

$ 1,498.00



Wall height 80”



Riolito Standard Drain Cover Plate included



1 wedi Fundo Shower Pan



wedi Building Panels to cover up to (3) 80” walls



1 drain assembly



1 Full Foam Curb Lean



Fasteners



wedi Joint Sealant



wedi Flexi Collar



wedi Mixing Valve Flexi Collar



wedi Riolito Standard Cover Plate

44 45

Description External Dimensions

Length × Width × Height

Unit Item #

Retail Price

wedi OneStep Shower Base 36” × 36” × 4”, center drain

(914 × 914 × 102 mm) 1 pc US4000004 $ 698.00

wedi OneStep Shower Base 36” × 48” × 4”, center drain

(914 × 1220 × 102 mm) 1 pc US4000005 $ 752.00

wedi OneStep Shower Base 32” × 60” × 4”, center drain

(813 × 1524 × 102 mm) 1 pc US4000008 $ 856.00

wedi OneStep Shower Base 36” × 60” × 4”, center drain

(914 × 1524 × 102 mm) 1 pc US4000003 $ 860.00

wedi OneStep Shower / Tub Replacement Base

36” × 60” × 4”, left drain

(914 × 1524 × 102 mm) 1 pc US4000006 $ 860.00

wedi OneStep Shower / Tub Replacement Base

36” × 60” × 4”, right drain

(914 × 1524 × 102 mm) 1 pc US4000007 $ 860.00

wedi OneStep Shower System

Custom Sizes available on request

Description Width x Length x Height Unit Item #

Retail Price

wedi Curb Over (Square Edges)

5” x 5’ x 4 1/2” (127 × 1524 × 114 mm) 1 pc US3000008 $ 76.01

wedi Curb Over (Square Edges)

5” x 8’ x 4 1/2” (127 × 2500 × 114 mm) 1 pc US3000010 $ 109.18

wedi Curb Over

Installation over 2” x 4”’s construction. CAUTION: Do not allow Glass Door Assembly to penetrate Curb Over.

Description Width x Length x Height Unit Item #

Retail Price

wedi Curb Full Foam (Square Edges) 5” x 3’ x 4 1/2”

(127 × 914 × 114 mm) 1 pc US3000011 $ 57.68

wedi Curb Full Foam (Square Edges) 5” x 5’ x 4 1/2”

(127 × 1524 × 114 mm) 1 pc 074319002 $ 93.28

wedi Curb Full Foam (Square Edges) 5” x 8’ x 4 1/2”

(127 × 2500 × 114 mm) 1 pc 074319001 $ 136.78

wedi Full Foam Curb

Sloped on top surface

wedi Fundo Discreto | System Component, for Creating Vertical Wall Drainage

For installation over wedi Fundo Riolito neo 48” x 60” or 32” x 60” bases

Description External Dimensions

Length x Width x Height

Unit Item #

Retail Price

wedi Fundo Discreto

System Component Integrates into

wedi seats, tileable cover included

31.5” × 2”

(800 × 51 mm) 1 pc 073738200 $ 998.00

Description Width x Length x Height Unit Item #

Retail Price

wedi Shower Ramp * 12” x 5’, sloped 1 1/2” to 1/4”

(305 × 1524 mm, sloped 38.1 to 6.35 mm)

1 pc

073736517

$ 220.42

wedi Shower Ramp

* ADA compliant

Description Width x Length x Height Unit Item #

Retail Price

wedi Seat M, Suspended Seat

17” x 17” (wall sides) x 4”

(432 × 432 × 102 mm)

1 pc

US3000001

$ 139.00

wedi Seat L, Suspended Seat 24” x 24” (wall sides) x 4”

(610 × 610 × 102 mm)

1 pc

US3000002

$ 159.00

wedi Shower Seat M&L

Installation over 2” x 4”’s construction, 16” o.c. framework.

Dimensions are outside dimensions.

Description Dimension Unit Item #

Retail Price

wedi Niche Square Edges 16” × 8” (406 × 203 mm) 1 pc US3000003 $ 51.50

wedi Niche Square Edges 16” × 12” (406 × 305 mm) 1 pc US3000004 $ 63.92

wedi Niche Square Edges 16” × 16” (406 × 406 mm) 1 pc US3000005 $ 65.92

wedi Niche Square Edges 16” × 22” (406 × 559 mm)

incl. removable shelf

1 pc

US3000007

$ 82.19

wedi Lean Combo Niche 16” × 42” (406 × 1067 mm)

incl. 2 removable shelves

1 pc

US3000006

$ 141.93

wedi Cathedral Niche 16” × 30” (406 × 762 mm)

incl. removable shelf

1 pc

US3000016

$ 99.00

wedi Niche | Square Edges

Sloped on top surface

Description Width x Length x Height Unit Item #

Retail Price

wedi Full Foam Curb “LEAN“ (Square Edges) 2” x 5’ x 3 1/2”

(51 × 1524 × 89 mm) 1 pc 074319007 $ 49.44

wedi Full Foam Curb “LEAN“ (Square Edges) 2” x 8’ x 3 1/2”

(51 × 2438 × 89 mm) 1 pc 074319008 $ 79.10

wedi Full Foam Curb “LEAN“

46 47

Description Width x Length x Height Unit Item #

Retail Price

wedi Bench,

Rectangular

16” × 32” × 20” sloped

(406 × 813 × 508 mm)

1 pc

073784100

$ 320.00

wedi Full Foam

Corner Seat

23” × 23” (wall sides) × 20” sloped

(584 × 584 × 508 mm)

1 pc

073784101

$ 270.00

wedi Bench | Rectangular and Full Foam Triangular Seats

Rectangular bench made with 2” wedi Building Panel, full foam corner seat made of solid XPS foam.

These units are pre-made and ready for thinset installation against walls and feature a 1/8“ slope to the front.

Description Length x Height x Depth Unit Item #

Retail Price

wedi Sanoasa Bench 1 M

approx. 35” × 18” × 15” (900 × 454 × 380 mm)

1 pc 076447030 $ 498.00

wedi Sanoasa Bench 1 L

approx. 47” × 18” × 15” (1200 × 454 × 380 mm)

1 pc 076447031 $ 598.00

wedi Sanoasa Bench 1



The bench is delivered in four parts: Bench element, substructure element and 2 side elements



wedi Joint Sealant is included for adhesion



wedi Fiberglass Mesh Tape is included for the wall/floor connection

Description Length x Height x Depth Unit Item #

Retail Price

wedi Sanoasa Bench 3 M

approx. 35” × 18” × 15” (900 × 454 × 380 mm)

1 pc 076447034 $ 498.00

wedi Sanoasa Bench 3 L

approx. 47” × 18” × 15” (1200 × 454 × 380 mm)

1 pc 076447035 $ 598.00

wedi Sanoasa Bench 3



The bench is delivered in four parts: Bench element, substructure element and 2 side elements



wedi Joint Sealant is included for adhesion



wedi Fiberglass Mesh Tape is included for the wall/floor connection

Description Length x Height x Depth Unit Item #

Retail Price

wedi Sanoasa Bench 2 M

approx. 35” × 18” × 15” (900 × 454 × 380 mm)

1 pc 076447032 $ 498.00

wedi Sanoasa Bench 2 L

approx. 47” × 18” × 15” (1200 × 454 × 380 mm)

1 pc 076447033 $ 598.00

wedi Sanoasa Bench 2



The bench is delivered in four parts: Bench element, substructure element and 2 side elements



wedi Joint Sealant is included for adhesion



wedi Fiberglass Mesh Tape is included for the wall/floor connection

Description Length × Depth × Height Unit Item #

Retail Price

wedi Sanoasa Shower

Bench 4, straight

47 1/4 × 15 × 3 1/8”

(1200 × 380 × 80 mm) 1 pc US3000000 $ 338.00

wedi Sanoasa Shower Bench 4

Flexible waterproofing membrane for medium and high exposure wet areas – for interior walls / showers and steam showers.

Description Width × Roll Length Unit Item #

Retail Price

wedi Subliner Dry Mat

(waterproong / Crack Iso)

39” × 16’

(1 × 5 m) 1 roll US5000001 $ 90.64

wedi Subliner Dry Mat

(waterproong / Crack Iso)

39” × 98’

(1 × 30 m) 1 roll US5000005 $ 508.13

wedi Subliner Dry

Waterproof Sealing Tape

5“ × 32.8’

(127 mm × 10 m) 1 roll US5000002 $ 43.49

wedi Mixing Valve

Flexi Collar

Ø 5“

(Ø 127 mm) 1 piece US5000000 $ 15.13

wedi Flexi Collar, for sealing around

1/2“ to 3/4“ shower pipe protrusions

4 3/4“ × 4 3/4“

(115 × 115 mm) 1 piece US5000033 $ 12.47

Subliner Dry Sealing Tape

Inside Corner

4 3/4“ × 4 3/4“ × 2 1/4“

(115 × 115 × 57.15 mm) 1 roll US5000007 $ 15.00

Subliner Dry Sealing Tape

Outside Corner

4 3/4“ × 4 3/4“ × 2 1/4“

(115 × 115 × 57.15 mm) 1 roll US5000008 $ 15.00

wedi Subliner Dry | Waterproofing and Crack-bridging Sheet Membrane

Description Contents Unit Item #

Retail Price

wedi Joint Sealant,

MS polymer sealant 10 oz. ( 310 ml) 1 Cartridge US5000013 $ 15.00

wedi Joint Sealant,

MS polymer sealant 20 oz. (519.5 ml) 1 Sausage US5000010 $ 24.94

wedi Joint Sealant | MS Polymer Sealant and Adhesive

Permanently flexible, waterproof sealant and adhesive for joint treatment.

Description Unit Item #

Retail Price

wedi Sausage Gun, gun for wedi joint MS polymer sealant sausages 1 piece US5000019 $ 74.16

wedi Sausage Gun Replacement Tip per piece US5000020 $ 1.03

wedi Sausage Gun | Gun for MS Polymer Sealant Sausages and Replacement Tips

48 49

wedi Accessories | Coarse Thread Screws, Ceramic Coating

Phillips head for wood studs, premium ceramic coating (ACQ Compliant)

Description Length Unit/Box Item #

Retail Price

Fine thread self-tapping

inc coated 1 1/4” (31.75 mm) 100 pcs US5000018 $ 20.76

Fine thread self-tapping

ceramic coated 2 1/2“ (63 mm) 100 pcs US5000049 $ 22.66

wedi Accessories | Fine Thread Self Tapping Screws

For metal framework with no risk of electric/galvanic corrosion. Phillips head.

Description Unit Item #

Retail Price

wedi Vapor Barrier 24 gallons US5000051 $ 59.74

wedi Accessories | Vapor Barrier

For use on building panel in steam room applications prior to tiling

0.24 gallon unit = 25 sq ft with a 20 mil (dry) thickness/film, (2 coats,10 mil dry each)

Description Diameter Unit/Box Item #

Retail Price

Tab Steel Washers,

Galvanized 1 1/4” (31.75 mm) 100 pcs US5000014 $ 17.41

Tab Steel Washers,

Galvanized 1 1/4” (31.75 mm) 1000 pcs US5000009 $ 132.87

Washer, without tabs

for ooring 1 1/4” (31.75 mm) 100 pcs US5000015 $ 17.41

wedi Accessories | Tab Steel Washers, Galvanized

Tabbed washers provide four tabs for fast and secure placement. wedi Washers provide a solid gauge according to

ISO standards and less potential for deformation. Load capabilities are independently tested.

Description Length Unit/Box Item #

Retail Price

Coarse thread screws,

ceramic coating,

for US markets only 1 5/8” (41.5 mm) 100 pcs US5000016 $ 15.04

Coarse thread screws,

ceramic coating,

for US markets only 1 5/8” (41.5 mm) 1000 pcs US5000012 $ 87.02

Coarse thread screws, zinc

coating, for wood and metal

studs 20 gauge and lighter 3 1/2” (88.9 mm), for US markets only 100 pcs US5000050 $ 35.00

• Hospitality

• Health Care

• Universities

• Dormitories

wedi Custom Wellness & Spa Design Solutions

Starting a new custom project, residential or commercial steam room? Do you need custom loungers? From idea to

installation, you have our promise wedi will support you right from the start. The moment you contact us, our team

springs into action. We generate custom CAD drawings based upon your ideas and plans. We produce custom products

fabricated from impermeable extruded polystyrene foam material exclusively for steam showers and wetrooms. We test

all the assemblies to ensure everything works flawlessly before we supply you with all the components, ready to install.

We understand products are just part of the project. That’s why we create and work in tandem with your lighting con

cepts, heating systems and preferred shower technologies.

wedi is at your side – in all areas, at all times.

 Your idea – As you envision your wellness concept, contact wedi and we can help bring your idea to life.

 We plan together – wedi provides integrated project planning to ensure all components, shower technologies,

drains and supply pipes are incorporated into your vision and unified for proper performance.

 Made-to-measure products – With your approval, we produce solutions that fit your specifications and require

ments perfectly. Then we assure the system measures up in terms of performance through trial assemblies at our

factory all prior to shipping.

 On time delivery – We deliver all prefabricated components on time and in their entirety, with complete step-by-step

assembly instructions so you can take your idea and bring it to life!

50 51

01 02

wedi Shower & Spa System Solutions

Spanish

Turning

Point

wedi Soluciones de sistemas de ducha y spa

Inglés

Elemento de

Giro

50 51

01 02

• Hotelería

• Centros médicos

• Universidades

• Dormitorios

Soluciones de diseño personalizado

wedi para espacios de bienestar y spa

¿Va a iniciar un nuevo proyecto de sauna residencial o comercial personalizado? ¿Necesita tumbonas personalizadas? Desde

la concepción hasta la instalación, le prometemos que wedi le apoyará desde el principio. Desde el momento en que contacte

con nosotros, nuestro equipo entrará en acción. Generamos diseños asistidos por computadora en función de sus ideas y

planes. Fa

bricamos productos personalizados a partir de espuma de poliestireno extruido exclusivamente para duchas de vapor y

estancias

húmedas. Comprobamos todos los ensamblajes para verificar que todo funcione a la perfección antes de entregarles

todos los componentes, listos para instalar. Comprendemos que los productos son solo parte del proyecto. Es por ello que

creamos y trabajamos en conjunto con sus conceptos de iluminación, sistemas de calefacción y tecnologías de ducha preferidas.

wedi está a su lado en todas las áreas, en todo momento.

 Su idea – Cuando visualice su concepto de bienestar, póngase en contacto con wedi para que podamos ayudarle

a materializar su idea.

 Planificamos juntos – wedi ofrece una planificación integral del proyecto para garantizar que todos los compo-

nentes, tecnologías de ducha, desagües y tuberías de suministro se integren a su visión y se fusionen para lograr un

funcionamiento armonioso.

 Productos hechos a medida – Con su aprobación, fabricamos soluciones que se ajustan perfectamente a sus

especificaciones y requisitos. Después, nos cercioramos de que el sistema dé la talla mediante ensamblajes de prueba

en nuestra fábrica todo antes de enviarlo.

 Entrega puntual – Entregamos todos los componentes prefabricados en su totalidad y a tiempo, junto con instruc-

ciones de montaje completas y detalladas para que sus ideas cobren vida en sus manos!

48 49

Accesorios wedi | Tornillos de rosca gruesa con revestimiento cerámico

Punta phillips para montantes de madera, revestimiento cerámico de primera calidad (cumple con la norma ACQ)

Descripción Longitud Unidad/caja N.º de artículo Precio

Autorroscante de rosca na y

revestimiento cerámico 31.75 mm 100 piezas US5000018 $ 20,76

Autorroscante de rosca na y

revestimiento cerámico 63 mm 100 piezas US5000049 $ 22,66

Accesorios wedi | Tornillos autorroscantes de rosca fina y revestimiento cerámico

Para estructuras metálicas sin riesgo de corrosión eléctrica o galvánica. Punta Phillips.

Descripción Unidad N.º de artículo Precio

Barrera de vapor wedi 24 galón US5000051 $ 59,74

Accesorios wedi | Barrera de vapor

Para usar en paneles de construcción en aplicaciones de salas de vapor antes de enlosarse

Unidad de galón de 0.24 = 0.908 litros, 3.22 metros2 con espesor de película de 20 mils (seco),

(2 capas de 10 mils secas cada una)

Descripción Diámetro Unidad/caja N.º de artículo Precio

Arandelas con saliente de acero,

galvanizadas 31.75 mm 100 piezas US5000014 $ 17,41

Arandelas con saliente de acero,

galvanizadas 31.75 mm 1000 piezas US5000009 $ 132,87

Arandela,

sin saliente para el piso 31.75 mm 100 piezas US5000015 $ 17,41

Accesorios wedi | Arandelas con saliente de acero, galvanizadas

Las arandelas con saliente ofrecen cuatro salientes para agilizar y asegurar la instalación. Las arandelas wedi tienen

un resistente espesor que cumple con las normas ISO y están menos sujetos a deformación. Las capacidades de carga

se comprueban de forma independiente.

Descripción Longitud Unidad/Box N.º de artículo Precio

Tornillos de rosca gruesa

con revestimiento cerámico

(mercados estadounidenses solamente) 41.5 mm 100 piezas US5000016 $ 15.04

Tornillos de rosca gruesa

con revestimiento cerámico

(mercados estadounidenses solamente)

41.5 mm 1000 piezas US5000012 $ 87,02

Tornillos de rosca gruesa con

revestimiento de cinc para

montantes de madera y metal

de espesor 20 y más livianos

88.9 mm

(mercados estadouni-

denses solamente)

100 piezas

US5000050 $ 35.00

Descripción Índice Unidad N.º de artículo Precio

Sellador de juntas wedi,

sellador de polímero MS 310 ml 1 cartucho US5000013 $ 15,00

Sellador de juntas wedi,

sellador de polímero MS 519.5 ml 1 tubo US5000010 $ 24,94

Sellador de juntas wedi | Sellador y adhesivo de polímero MS

Sellador y adhesivo permanentemente flexible e impermeable para tratamiento de juntas

Descripción Unidad N.º de artículo Precio

Pistola de tubo wedi, pistola para tubos de sellador

de polímero MS para juntas wedi

1 pieza

US5000019

$ 74,16

Boquilla de repuesto para pistola de tubo wedi por tubo US5000020 $ 1,03

Pistola de tubo wedi | Pistola para tubos de sellador de polímero MS y boquillas de repuesto

Descripción Ancho × rollo Longitud Unidad N.º de artículo Precio

wedi Subliner Dry,

lámina de impermeabilización 1 × 5 m 1 rollo US5000001 $ 90,64

wedi Subliner Dry,

lámina de impermeabilización 1 × 30 m 1 rollo US5000005 $ 508,13

wedi Subliner Dry

Cinta impermeable de sellado 127 mm × 10 m 1 rollo US5000002 $ 43,49

Collarín wedi Flexi Collar para válvula

mezcladora

Ø 127 mm 1 pieza US5000000 $ 15,13

Collarín wedi Flexi Collar para sellar

alrededor de salientes de tubería de

ducha de 0.5 in a 0.75 in (13 mm a

19 mm)

115 × 115 mm

1 pieza

US5000033

$ 12,47

Cinta adhesiva Subliner Dry,

esquina interior

115 × 115 × 57.15 mm 1 rollo US5000007 $ 15,00

Cinta adhesiva Subliner Dry,

esquina exterior

115 × 115 × 57.15 mm 1 rollo US5000008 $ 15,00

wedi Subliner Dry | lámina de impermeabilización

Membrana impermeabilizante flexible para espacios húmedos de exposición moderada y extrema: para paredes y

duchas interiores y duchas de vapor.

46 47

Descripción Ancho x Longitud x Altura Unidad N.º de artículo Precio

wedi Bench, Rectangular

406 x 813 x 508 mm con pendiente 1 pieza 073784100 $ 320,00

Asiento esquinero de

espuma completo wedi

584 × 584 × 508 mm con pendiente

1 pieza

073784101

$ 270,00

Banco wedi | Asientos rectangulares y asientos triangulares de espuma completos

Banco rectangular hecho de paneles de construcción wedi de 5.08 cm, asiento esquinero de espuma completo

hecho de espuma de XPS sólida. Estas unidades son preformadas, están listas para instalar con mortero cola en

las paredes y tienen una pendiente de 3.18 mm en la parte frontal.

Descripción Longitud x Altura x Altura Unidad N.º de artículo Precio

wedi Sanoasa Bench 1 M

aproximadamente 900 × 454 × 380 mm

1 pieza 076447030 $ 498,00

wedi Sanoasa Bench 1 L

aproximadamente 1200 × 454 × 380 mm

1 pieza 076447031 $ 598,00

Banco wedi Sanoasa 1



El banco se entrega en cuatro partes: elemento de banco, elemento de subestructura y 2 elementos



Se incluye sellador de juntas wedi para adhesión



Se incluye cinta de malla de fibra de vidrio para la conexión de la pared

Descripción Longitud x Altura x Altura Unidad N.º de artículo Precio

wedi Sanoasa Bench 3 M

aproximadamente 900 × 454 × 380 mm

1 pieza 076447034 $ 498,00

wedi Sanoasa Bench 3 L

aproximadamente 1200 × 454 × 380 mm

1 pieza 076447035 $ 598,00

Banco wedi Sanoasa 3



El banco se entrega en cuatro partes: elemento de banco, elemento de subestructura y 2 elementos



Se incluye sellador de juntas wedi para adhesión



Se incluye cinta de malla de fibra de vidrio para la conexión de la pared

Descripción Longitud x Altura x Altura Unidad N.º de artículo Precio

wedi Sanoasa Bench 2 M

aproximadamente 900 × 454 × 380 mm

1 pieza 076447032 $ 498,00

wedi Sanoasa Bench 2 L

aproximadamente 1200 × 454 × 380 mm

1 pieza 076447033 $ 598,00

Banco wedi Sanoasa 2



El banco se entrega en cuatro partes: elemento de banco, elemento de subestructura y 2 elementos



Se incluye sellador de juntas wedi para adhesión



Se incluye cinta de malla de fibra de vidrio para la conexión de la pared

Descripción Longitud × Altura × Altura Unidad N.º de artículo Precio

wedi Sanoasa Shower

Bench 4, recto

1200 × 380 × 80 mm 1 pc US3000000 $ 338.00

Banco wedi Sanoasa 4

Descripción Ancho x Longitud x Altura Unidad N.º de artículo Precio

Rampa de ducha wedi *

1524 x 305 mm,

con pendiente de 38.1 x 6.35 mm

1 pieza 073736517

$ 220,42

wedi Rampa de ducha

* Cumple con la ley estadounidense para ciudadanos con discapacidades (ADA)

Descripción Ancho x Longitud x Altura Unidad N.º de artículo Precio

Asiento wedi M,

asiento colgante

432 × 432 × 102 mm

(los lados de la pared)

1 pieza

US3000001

$ 139,00

Asiento wedi L,

asiento colgante

610 × 610 × 102 mm

(los lados de la pared)

1 pieza

US3000002

$ 159,00

Asiento de ducha wedi M&L

Para instalar sobre una estructura de 5.08 x 10.16 cm y 40.64 cm de centro a centro

Las dimensiones son externas.

Descripción Dimension Unidad N.º de artículo Precio

Perles cuadrados

para nicho wedi

406 × 203 mm

1 pieza

US3000003

$ 51,50

Perles cuadrados

para nicho wedi

406 × 305 mm

1 pieza

US3000004

$ 63,92

Perles cuadrados

para nicho wedi

406 × 406 mm

1 pieza

US3000005

$ 65,92

Perles cuadrados

para nicho wedi

406 × 559 mm

incluida una repisa desmontable

1 pieza

US3000007

$ 82,19

Nicho combinado wedi Lean 406 × 1067 mm

incluidas 2 repisas desmontables

1 pieza

US3000006

$ 141,93

Nicho wedi Cathedral 406 × 762 mm

incluida una repisa desmontable

1 pieza

US3000016

$ 99,00

Nicho wedi | Perfiles cuadrados

Con pendiente en la superficie superior

Descripción Ancho x Longitud x Altura Unidad N.º de artículo Precio

Sardinel de espuma completo

wedi “LEAN“ (perles cuadrados) 127 x 1524 x 63.5 mm 1 pieza 074319007 $ 49,44

Sardinel de espuma completo

wedi “LEAN“ (perles cuadrados) 127 x 2438 x 63.5 mm 1 pieza 074319008 $ 79,10

wedi Sardinel de espuma completo “LEAN“

44 45

Descripción Dimensiones externas

Longitud x Ancho x Altura

Unidad N.º de artículo Precio

Base de ducha wedi OneStep 914 × 914 × 102 mm

(drenaje centrado) 1 pieza US4000004 $ 698,00

Base de ducha wedi OneStep 914 × 1220 × 102 mm

(drenaje centrado) 1 pieza US4000005 $ 752,00

Base de ducha wedi OneStep 813 × 1524 × 102 mm

(drenaje centrado) 1 pieza US4000008 $ 856,00

Base de ducha wedi OneStep (914 × 1524 × 102 mm

(drenaje centrado) 1 pieza US4000003 $ 860,00

Base de reemplazo para ducha o bañera

wedi OneStep

914 × 1524 × 102 mm

(drenaje a la izquierda) 1 pieza US4000006 $ 860,00

Base de reemplazo para ducha o bañera

wedi OneStep

914 × 1524 × 102 mm

(drenaje a la derecha) 1 pieza US4000007 $ 860,00

Sistema de ducha wedi OneStep

Tamaños personalizados disponibles por encargo

Descripción Ancho x Longitud x Altura Unidad N.º de artículo Precio

Revestimiento de sardinel wedi

(perles cuadrados)

127 x 1524 x 114 mm

1 pieza US3000008 76,01

Revestimiento de sardinel wedi

(perles cuadrados)

127 x 2438 x 114 mm

1 pieza US3000010 109,18

wedi Revestimiento de sardinel

Se instala sobre estructuras de 5.08 x 10.16 cm.

PRECAUCIÓN: No permita que el ensamblaje de puerta de cristal penetre el recubrimiento del sardinel

Descripción Ancho x Longitud x Altura Unidad N.º de artículo Precio

Sardinel de espuma completo wedi

(perles cuadrados) 127 x 914,4 x 114 mm 1 pieza US3000011 $ 57,68

Sardinel de espuma completo wedi

(perles cuadrados) 127 x 1524 x 114 mm 1 pieza 074319002 $ 93,28

Sardinel de espuma completo wedi

(perles cuadrados) 127 x 2438 x 114 mm 1 pieza 074319001 $ 136,78

wedi Sardinel de espuma completo

Con pendiente en la superficie superior

wedi Fundo Discreto | Componente del sistema, para crear un desagüe de pared vertical

Para instalar sobre bases wedi Fundo Riolito de 121.92 cm x 152.4 cm o 81.28 cm x 152.4 cm

Descripción Dimensiones externas

Longitud x Ancho x Altura

Unidad N.º de artículo Precio

El componente del sistema Fundo

Discreto se integra a los asientos

wedi, incluida la tapa enlosable 800 x 51 mm 1 pieza 073738200 $ 998,00

Descripción Ancho x Longitud x Altura Unidad N.º de artículo Precio

Tapa de desagüe enlosable Fundo Riolito

para bases Riolito de 91.44 x 152.4 cm

y 121.92 x 182.88 cm 41 x 1100 x 19 mm 1 pieza 676797047 $ 388,70

Tapa de desagüe enlosable Fundo Riolito

para bases Riolito de 121.92 x 152.4 cm

y 81.28 x 182.88 cm 41 x 700 x 19 mm 1 pieza 676797050 $ 357,50

wedi Fundo Riolito neo Tileable | Chapa de recubrimiento de acero inoxidable

Para instalaciones de losetas de 4.76 x 25.4 mm de altura.

Invierta para losetas más nas o más gruesas.

Para bases Fundo Riolito neo y Riolito neo Modular.

Descripción Ancho x Longitud x Altura Unidad N.º de artículo Precio

Tapa de desagüe Fundo Riolito Exclusive

para bases Riolito de 91.44 x 152.4 cm

y 121.92 x 182.88 cm 41 x 1100 x 19 mm 1 pieza 676797046 $ 388,70

Tapa de desagüe Fundo Riolito Exclusive

para bases Riolito de 121.92 x 152.4 cm

y 81.28 x 182.88 cm 41 x 700 x 19 mm 1 pieza 676797049 $ 357,50

wedi Fundo Riolito neo Exclusive | Chapa de recubrimiento de acero inoxidable

Para instalaciones de losetas de 4.76 x 25.4 mm de altura.

Para bases Fundo Riolito neo y Riolito neo Modular.

Descripción Ancho x Longitud x Altura Unidad N.º de artículo Precio

Tapa de desagüe Fundo Riolito Standard

para bases Riolito de 91.44 x 152.4 cm

y 121.92 x 182.88 cm 41 x 1100 x 19 mm 1 pieza 676797045 $ 190,00

Tapa de desagüe Fundo Riolito Standard

para bases Riolito de 121.92 x 152.4 cm

y 81.28 x 182.88 cm 41 x 700 x 19 mm 1 pieza 676797048 $ 146,00

wedi Fundo Riolito neo Standard | Chapa de recubrimiento de acero inoxidable

Para instalaciones de losetas de 4.76 x 25.4 mm de altura.

Para bases Fundo Riolito neo y Riolito neo Modular.

Kit de ducha wedi Fundo Riolito

Descripción Dimension Unidad N.º de artículo Precio

Kit de ducha wedi Fundo Riolito

660 x 1830 mm pendiente unilateral 1 pieza US4000010 $ 1.498,00



Altura de la pared 203.2 cm



Incluye chapa de recubrimiento Riolito Standard



1 bandeja de ducha wedi Fundo



Paneles de construcción wedi para abarcar

hasta tres (3) paredes de 203.2 cm



1 ensamblaje de desagüe



1 sardinel íntegro de espuma Lean



Afianzadores



Sellador de juntas wedi



Collarín wedi Flexi Collar



Collarín wedi Flexi Collar para válvula mezcladora



wedi Riolito Standard Cover Plate

42 43

Descripción Unidad N.º de artículo Precio

Set de tapa wedi Fundo Fino 1.1, cuadrada de 4 in × 4 in

(102 mm × 102 mm) (diseño de margarita)

1 pc

US1000021

$ 110,00

Set de tapa wedi Fundo Fino 1.1.2, redonda

(diseño de margarita)

1 pc

US1000023

$ 110,00

Set de tapa wedi Fundo Fino 1.3, cuadrada de 4 in × 4 in

(102 mm × 102 mm) con tornillos (diseño de margarita)

1 pc

US1000022

$ 110,00

Set de tapa wedi Fundo Fino 3.1, cuadrada de 4 in × 4 in

(102 mm × 102 mm) (diseño de guijarros)

1 pc

US1000024

$ 110,00

Set de tapa wedi Fundo Fino 3.1.2, redonda

(diseño de guijarros)

1 pc

US1000026

$ 110,00

Set de tapa wedi Fundo Fino 3.3, cuadrada de 4 in × 4 in

(102 mm × 102 mm) con tornillos (diseño de guijarros)

1 pc

US1000025

$ 110,00

Chapa de recubrimiento enlosable wedi Fundo Fino,

cuadrada de 4 in × 4 in (102 mm × 102 mm)

1 pc

US1000020

$ 110,00

Tapa de acero inoxidable wedi Fundo Fino, 4 in × 4 in

(102 mm × 102 mm) con tornillos

1 pc

US1000029

$ 64,27

wedi Fundo Fino | Tapas de diseño opcionales, acero inoxidable pulido

Set 1.1

Set 3.1

Set 3.1.2

Set 1.1.2

Chapa de recubrimiento

enlosable Fundo Fino

Descripción Dimensiones externas

Longitud x Ancho x Altura

Longitud

de la canal

N.º de artículo Precio

Fundo Riolito, base de piso

con desagüe de canal

914 x 1524 x 51 mm incluidos el

desagüe y la pendiente tetradireccional 1100 mm 075100016 $ 819,00

Fundo Riolito, base de piso

con desagüe de canal

1220 x 1524 x 63 mm incluidos el

desagüe y la pendiente tetradireccional 700 mm 075100012 $ 1.038,70

Fundo Riolito, base de piso

con desagüe de canal

1220 x 1830 x 51 mm incluidos el

desagüe y la pendiente tetradireccional 1100 mm 075100014 $ 1.168,70

Fundo Riolito, base de piso

con desagüe de canal

813 x 1830 x (63 mm – 34 mm)

incluidos el desagüe y la pendiente

sencilla (monodireccional)

700 mm 075100015 $ 830,00

Fundo Riolito, base de piso

con desagüe de canal

813 x 1830 x 63 mm incluidos desagüe,

pendiente bidireccional, desagüe de

30.48 cm descentrado

700 mm 075100035 $ 830,00

wedi Fundo Riolito neo | Base de ducha con desagüe de canal integrado



Para usar con bases wedi Fundo Primo, Ligno, Trollo y Nautilo



La superficie de la chapa de recubrimiento enlosable se alza 1.59 mm sobre una base Fundo. Para una

instalación a ras de suelo, puede usarse el sellador de juntas wedi como adhesivo puntual para instalar la

loseta dentro del recubrimiento de manera de reducir la altura en lugar de la acumulación de lecho de

mortero cola por debajo de la loseta de la base de ducha.



1 tapa de desagüe de acero inoxidable



1 marco de acero inoxidable

Descripción Dimensiones externas

Longitud x Ancho x Altura

Longitud

de la canal

N.º de artículo Precio

Fundo Riolito neo,

módulo lineal

813 x 146 mm 700 mm 075100052 $ 300,00

Fundo Riolito neo,

módulo lineal

1220 x 146 mm 1100 mm 075100053 $ 360,00

Fundo Riolito neo,

módulo de extensión

813 x 1700 mm

– 075100050 $ 510,00

Fundo Riolito neo,

módulo de extensión

1220 x 1700 mm

– 075100051 $ 680,00

wedi Fundo Riolito neo Modular | Base de ducha con desagüe de canal integrado



Para usar con unidades de desagüe de instalación a presión



Se ofrecen juntas especiales a pedido

Descripción Unidad N.º de artículo Precio

Junta de calafateo de goma especial para conexión de tubo de hierro fundido

1 pieza US5000030 $ 18,09

Junta de calafateo de goma especial para conexión de tubo de cobre 1 pieza US5000031 $ 18,09

Accesorios de desagüe wedi Fundo | Junta de estanqueidad de 5.08 cm



Para instalar esta tapa de desagüe, la altura del enlosado debe ser al menos de 6.35 mm



Para usar con bases wedi Fundo Primo, Ligno, Trollo y Nautilo



La tapa de desagüe estándar que incluyen los sistemas Fundo Primo, Ligno, Trollo y Nautilo es US1000009



1 tapa de desagüe de acero inoxidable



Marco de acero inoxidable

wedi Fundo Standard | Tapa de desagüe, base de acero inoxidable

Descripción Ancho x Longitud Unidad N.º de artículo Precio

Set de tapa de desagüe

wedi Fundo, acero inoxidable pulido 100 x 100 mm 1 pieza US1000009 $ 64,27

Set de tapa de desagüe wedi Fundo,

acero inoxidable pulido con tornillos 100 x 100 mm 1 pieza US1000029 $ 64,27

Set de tapa de desagüe wedi Fundo,

bronce bruñido con aceite 100 x 100 mm 1 pieza US1000008 $ 70,97

Descripción Unidad N.º de artículo Precio

Llave reforzada para desagües 1 pieza US5000032 $ 16,07

Llave para desagües wedi Fundo

Herramienta de apoyo utilizada para apretar las juntas de goma de ajuste por compresión wedi Fundo Primo

Descripción Unidad N.º de artículo Precio

Kit de desagüe Fundo Standard, ABS, instalación a presión 1 pieza US1000003 $ 77,66

Kit de desagüe Fundo, latón, instalación a presión 1 pieza US1000004 $ 92,39

Kit de desagüe Fundo Glue, ABS, instalación con pegamento 1 pieza US1000007 $ 77,66

Unidad de desagüe de instalación a presión Fundo 1 pieza US1000012 $ 10,71

Unidad de desagüe de latón e instalación a presión Fundo 1 pieza US1000011 $ 32,96

Desagüe Fundo Glue, ABS, instalación con pegamento 1 pieza US1000010 $ 13,39

Drenaje angular wedi 1 pieza US1000027 $ 117,34

Kits y unidades de desagüe wedi Fundo Standard | Desagüe de PVC, ABS y latón



Unidades de desagüe conectadas a tubería de cédula 40



Las unidades de desagüe de instalación a presión pueden usarse con tubos de ABS o PVC



Las unidades de desagüe Glue (de instalación con pegamento) pueden usarse con tubería de piso de ABS



Los artículos vendidos como kit tienen una unidad de drenaje, collar de extension y juego de cubierta estándar



Para Fundo Primo y Ligno

40 41

Descripción Dimensiones Unidad N.º de artículo Precio

Fundo Primo, rectangular,

desagüe descentrado 914 x 1830 mm incluido el desagüe 1 pieza 073735521 $ 667,44

wedi Fundo Primo | Base de ducha rectangular, desagüe descentrado

Para instalaciones de reemplazo de tina.

Recorte la unidad de manera que siempre se ajuste al tamaño del desagüe y la ducha.

Cuenta con una unidad desagüe y un set de tapa de acero inoxidable pulido.

Descripción Dimensiones Unidad N.º de artículo Precio

Fundo Ligno, cuadrada 1220 x 1220 x 19 mm 1 pieza 073732015 $ 772,50

Fundo Ligno, cuadrada 1524 x 1524 x 19 mm 1 pieza 073732018 $ 1.336,94

Fundo Ligno, rectangular 914 x 1220 x 19 mm 1 pieza 073732014 $ 716,88

Fundo Ligno, rectangular 914 x 1524 x 19 mm 1 pieza 073732016 $ 762,20

Fundo Ligno, rectangular 1220 x 1524 x 19 mm 1 pieza 073732017 $ 1.019,70

wedi Fundo Ligno | Bases de ducha cuadradas y rectangulares, desagüe centrado

Kit de ducha wedi Fundo Primo

Descripción Dimension Unidad N.º de artículo Precio

Kit de ducha wedi Fundo Primo 914 x 914 mm desagüe centrado 1 pieza US2000002 $ 881,02

Kit de ducha wedi Fundo Primo 914 x 1220 mm desagüe centrado 1 pieza US2000007 $ 1.124,76

Kit de ducha wedi Fundo Primo 1220 x 1220 mm desagüe centrado 1 pieza US2000004 $ 1.231,88

Kit de ducha wedi Fundo Primo 914 x 1524 mm desagüe centrado 1 pieza US2000003 $ 1.165,96

Kit de ducha wedi Fundo Primo 914 x 1830 mm desagüe centrado 1 pieza US2000001 $ 1.205,10

Kit de ducha wedi Fundo Primo 914 x 1830 mm desagüe descentrado 1 pieza US2000008 $ 1.205,10

Kit de ducha wedi Fundo Primo 1220 x 1524 mm desagüe centrado 1 pieza US2000005 $ 1.435,82

Kit de ducha wedi Fundo Primo 1220 x 1830 mm desagüe centrado 1 pieza US2000006 $ 1.645,94



Altura de la pared 203.2 cm



1 bandeja wedi Fundo



Paneles de construcción wedi para abarcar hasta

tres (3) paredes de 203.2 cm



1 ensamblaje de desagüe



1 sardinel íntegro de espuma Lean



Sellador de juntas wedi



Afianzadores



Espátula wedi



Collarín wedi Flexi Collar



Collarín wedi Flexi Collar para válvula mezcladora



La pendiente se extiende 60.96 cm o 30.48 cm en la dirección del panel de extensión o la dirección del surco predeterminado.



Los paneles de extensión están diseñados para encajar con las bases Fundo Primo y las bases Fundo Riolito de

pendiente tetradireccional. La altura de instalación debe incrementarse si se conecta con bases de ducha Fundo

y Ligno cuyo espesor de contorno supere las 38.1 mm.

wedi Fundo / Paneles de extensión con pendiente predeterminada

Descripción Ancho x Longitud x Altura Unidad N.º de artículo Precio

Extensión para base de ducha

660 x 1220 mm, pendiente de 20 mm/m

lámina 073783528 $ 229,78

Extensión para base de ducha

Lean (modelo más delgado)

12” x 1830 mm, pendiente de 20 mm/m

lámina

073783523 $ 158,00

Panel de extensión Ligno

12” x 1524 mm, pendiente de 20 mm/m

lámina 073732030 $ 176,18

Descripción

Ancho x Longitud x Altura

Unidad/plataforma N.º de artículo

Precio

Panel de construcción wedi

914 x 1524 x 6 mm 50 paneles = 69,7 m

010718006 $ 53,07

Panel de construcción wedi

914 x 1524 x 12.7 mm 50 paneles = 69,7 m

010717064 $ 55,46

Panel de construcción wedi

600 x 1200 x 4 mm 136 paneles = 101,0 m

010000004 $ 28,01

Panel de construcción wedi

600 x 2500 x 15.8 mm 50 paneles = 69,7 m

010716316 $ 68,56

Panel de construcción wedi

600 x 2500 x 25.4 mm 56 paneles = 83,2 m

010719325 $ 77,87

Panel de construcción wedi

600 x 2500 x 20 mm 50 paneles = 74,3 m

010000020 $ 70,45

Panel de construcción wedi

600 x 2500 x 30 mm 36 paneles = 53,5 m

010000030 $ 79,31

Panel de construcción wedi

600 x 2500 x 40 mm 36 paneles = 53,5 m

010000040 $ 93,83

Panel de construcción wedi

600 x 2500 x 50 mm 24 paneles = 35,7 m

010000050 $ 99,00

Panel de construcción wedi

600 × 2500 × 80 mm

12 paneles = 17,8 m

010710080

(solo por pedido especial)

$ 119,36

Panel de construcción wedi

600 × 2500 × 100 mm

20 paneles = 29,0 m

010710199

(solo por pedido especial)

$ 151,72

Panel de construcción wedi

Descripción

Ancho x Longitud x Altura

Unidad/plataforma

N.º de artículo Precio

Panel de construcción wedi XL 900 x 2500 x 12.5 mm 26 paneles = 58,0 m

010000912 $ 92,60

Panel de construcción wedi XXL 1200 x 2600 x 12.5 mm 26 paneles = 79,7 m

010001612 $ 138,63

Panel de construcción wedi XXL 1200 x 2500 x 50 mm 12 paneles = 36,8 m

010001250 $ 239,52

Panel de construcción wedi XL & XXL

Descripción Dimensiones Unidad N.º de artículo Precio

Fundo Primo, cuadrada 914 x 914 mm incluido el desagüe 1 pieza 073735507 $ 460,76

Fundo Primo, cuadrada 1220 x 1220 mm incluido el desagüe 1 pieza 073735505 $ 638,60

Fundo Primo, cuadrada 1524 x 1524 mm incluido el desagüe 1 pieza 073735518 $ 1.116,52

Fundo Primo, cuadrada 1830 x 1830 mm incluido el desagüe 1 pieza 073735524 $ 1.639,76

Fundo Primo, rectangular 914 x 1220 mm incluido el desagüe 1 pieza 073735516 $ 587,10

Fundo Primo, rectangular 914 x 1524 mm incluido el desagüe 1 pieza 073735506 $ 627,27

Fundo Primo, rectangular 1220 x 1524 mm incluido el desagüe 1 pieza 073735509 $ 831,21

Fundo Primo, rectangular 1220 x 1830 mm incluido el desagüe 1 pieza 073735508 $ 983,65

Fundo Primo, rectangular 1524 x 1830 mm incluido el desagüe 1 pieza 073735519 $ 1.322,52

Fundo Primo, rectangular 1220 x 2134 mm incluido el desagüe 1 pieza 073735522 $ 1.268,96

Fundo Primo, rectangular 1524 x 2134 mm incluido el desagüe 1 pieza 073735523 $ 1.586,20

Fundo Primo, rectangular 914 x 1830 mm incluido el desagüe 1 pieza 073735525 $ 667,44

wedi Fundo Primo | Bases de ducha cuadradas y rectangulares, desagüe centrado

Los elementos wedi Fundo varían en espesor de 38.1 x 50.8 mm en el contorno. Cuando se trabaja con rampas o

sardineles modulares wedi, puede que sea necesario ajustar la muesca de conexión en obra.

Cuenta con una unidad desagüe y un set de tapa de acero inoxidable pulido.

38 39

PRO

Garantía de 20 años

de un sistema de

cuarto de baño wedi

Certificación y programa de garantía de 15 o 20 años PRO de wedi

En ciertas circunstancias, en lugar de la garantía limitada de 10 años anterior, wedi ofrece una garantía limitada de 15 años y una garantía limitada de

20 años, de acuerdo con las cuales wedi garantiza que los productos no tendrán defectos de fabricación y cumplirán con las especificaciones publicadas

de wedi por un período total de 15 años o 20 años si son instalados por un instalador con certificación PRO en una instalación registrada como parte

de una instalación garantizada por 15 años o una instalación garantizada por 20 años. Detalles de las opciones de garantía de 15 o 20 años de

wedi en www.wedicorp.com.

Garantía de 15 años de un

sistema de ducha wedi

 Los sistemas de ducha de wedi y su cobertura y

servicio de garantía sin precedentes se suman a

los formidables instaladores de wedi

 Inscríbase en las clases de certificación PRO de

wedi y disfrute de las opciones del paquete

integral de garantía de 15 o 20 años que le

ofrece wedi

Propiedades y valor de los métodos de prueba (panel de construcción wedi y elementos del sistema de ducha Fundo)

Conductividad térmica 75°F (25°C) – ASTM C518 0.23 Bbtu in/hr F

Resistencia a la tracción ASTM C297 65 psi

Resistencia al corte

Bajo las condiciones estipuladas

en ANSI A118.10-1999

54 psi

Impermeabilización ASTM D4068 / ANSI A118.10-1999 Aprobado

Capilaridad 0

Valor R 75°F (25°) – ASTM C518

4.3 h ft 2 F/Btu/in

(valor R para wedi de 1 in = 4.3)

Resistencia a la exión ASTM C947 627 psi

Prueba Robinson de pisos ASTM C627 Uso comercial para servicio pesado, aprobado

Rigidez longitudinal del aanzador ASTM C473 Húmedo: 131.8 lb/in

; seco: 196.2 lb/in

Límites de temperatura -58 / +175° F

Resistencia a la congelación-desconge-

lación

ASTM C666: 25 ciclos Sin desintegración ni cambios

Impermeabilización del montaje ASTM E331

Aprobado, montaje del kit wedi Fundo Kit

(sistema completo)

Resistencia a hongos y bacterias ASTM G21 Aprobado, sin proliferación

Envejecimiento acelerado AC 71: 25 ciclos Sin desintegración

UL 1715

Prueba de inamabilidad del material

de acabado interior

Aprobado, propagación de las llamas <10

Variación lineal AC 159 / ASTM 1037-39 Aprobado, menos de 0.07 %

Características de combustión

de la supercie

ASTM E 84-04 Propagación de las llamas de 10 o menos

Índice de desprendimiento de humo de 95

Cumplimento normativo de los

drenajes de piso y de zanja

ASME A112.18.2 Aprobado, cumple (ICC PMG 1189)

Peso de los paneles de construcción wedi Ancho Longitud Altura Peso

914 mm 1524 mm 6 mm 3.66 kg

914 mm 1524 mm 12,7 mm 3.93 kg

Propiedades técnicas  Sistemas wedi

CAPAS BASE DE TABLEROS DE REFUERZO DE LOSETAS Y SISTEMA DE DUCHA WEDI FUNDO

Cumplimiento de los

siguientes códigos

International Plumbing Code

(IPC) de 2015, 2012 y 2009

International Residential Code

(IRC) de 2015, 2012 and 2009

International Building Code

(IBC) de 2015, 2012 and 2009

National Standard Plumbing Code

(NSPC) de 2015, 2012 and 2009

Uniform Plumbing Code

(UPC) de 2015, 2012 and 2009*

National Plumbing Code of Canada

de 2015, 2010 and 2005**

* El código Uniform Plumbing Code

es una publicación sujeta a derechos de autor de la

Asociación Internacional de Ociales de Plomería y Mecánica

** El código National Plumbing Code of Canada

es una publicación sujeta a derechos de

autor del Consejo Nacional de Investigaciones de Canadá

Cumplimiento de las

siguientes normas

ANSI A 118.10-2014: Membranas impermeables, adheridas y portantes para instalaciones de

losetas cerámicas y piedras dimensionadas con mortero cola

ASME A 112.6.3-2016: Drenajes de piso y de zanja

ICC-ES EG 159: Guía de evaluación de tableros de refuerzo rechapados (aprobadas en 12/2004)

ICC-ES AC 71, Criterios de aceptación de paneles de revestimiento de plástico alveolar

empleados como barreras resistentes al agua (aprobados en 2/2003, Ed. revisada en 11/2013)

IAPMO PS 46-2012: Kits de enlosado fabricados en obra

IAPMO PS 106-2015e1: Colectores de ducha y kits de ducha enlosables

Informe ICC-PMG 1189  Cumplimento del Código de Edificación Nacional

36 37

Aplicaciones especiales: el panel de construcción wedi como solución

Construcción de asientos y bancos personalizados mediante paneles de construcción

wedi de 1.5 in (38 mm) o 2 in (51 mm) de espesor

wedi ofrece asientos suspendidos o empotrados y asientos verticales de

piso prefabricados También pueden construirse in situ mediante paneles

de construcción wedi Esta es un opción ideal que se ajusta perfecta-

mente a su configuración de losetas y diseños.

01 02 03

Instalación en paredes de bañera

Mida y recorte el panel de construcción wedi para ajustarlo a la estruc-

tura (de madera o metal) de 16 in (406 mm) de centro a centro. Haga

una ranura en todos los paneles, si se han instalado en el contorno de

una bañera con brida, para incorporar la brida y lograr una pared a

plomo con esquinas cerradas y perpendiculares.

Fije un panel ranurado a la estructura con un cordón de sellador de

juntas wedi de 0.5 in (13 mm) entre la ranura y la brida. Fije el panel a

la estructura instalando arandelas y tornillos wedi a razón de 1 por cada

30 centímetros a lo largo de los montantes. Deje un espacio de 0.125 in

(3 mm) entre el borde de la bañera y el extremo inferior del panel wedi

para permitir el movimiento de la bañera. Aplique alternadamente un

cordón de sellador de juntas wedi entre ambos materiales.

Aplique un cordón continuo de sellador de juntas wedi de 0.5 in (13

mm) en el borde de espuma azul superior del panel de construcción

wedi antes de instalar el siguiente panel y presiónelo fuertemente con-

tra el sellador. Coloque otro conjunto de arandela y tornillo wedi en la

unión para crear una transición nivelada entre los paneles y allane para

eliminar el exceso de sellador. Cuando instale un panel lateral wedi

en la pared posterior wedi ya fijada, aplique verticalmente un cordón

continuo de sellador de juntas wedi de 0.5 in (13 mm) en el panel wedi

que sirve de pared posterior, en la zona donde se encuentran ambos

paneles. Presione el sellador de juntas wedi cuando lleve el panel lateral

wedi a su lugar antes de sujetar con afianzadores. Por último, después

de haber instalado todos los paneles de construcción wedi, aplique un

segundo cordón de sellador de juntas wedi de 0.5 in (13 mm) en todas

las uniones y afianzadores y allane con una espátula.

01 02

Aplicaciones especiales: el panel de construcción wedi como solución

Paredes redondeadas y curvas

En los paneles de construcción wedi, haga una serie de cortes cuyo

espesor sea la mitad de la profundidad del panel. La distancia entre los

cortes dependerá de la estrechez del radio que se necesitará después.

Use una sierra circular para hacer estos cortes. Cuando se usa el panel

de construcción wedi, se dispone de una amplia gama de otras formas

posibles. Todo lo que necesita es un patrón que tenga la forma que

mejor satisfaga sus necesidades. Para formas más sencillas, puede que

no sea necesario usar un patrón.

Recorte el panel de construcción wedi con un cuchillo para uso gene-

ral y una regla. Así pueden hacerse estructuras de formas onduladas.

Para radios pequeños: haga cortes en forma de cuña en el panel de

construcción o recorte el panel de construcción wedi con una sierra

circular de mano y cúrvelo.

A01 B02

Instalación de la barrera de vapor wedi en aplicaciones de sauna wedi

Cada capa debe tener 8 milésimas de pulgada (203 micras) de espesor

(el espesor de la capa húmeda es igual al de la capa seca), para una

aplicación total de 16 milésimas de pulgada (406 micras) (el espesor de

la capa húmeda es igual al de la capa seca). La superficie está lista para

enlosarse con mortero epóxico compatible con ANSI 118.3 o mortero

cola modificado a base de cemento compatible con ANSI 118.4 (debe

recomendarse para zonas sumamente húmedas que sufran variaciones

de temperatura marcadas y frecuentes) solamente 3.5 horas después

de la última aplicación de la segunda capa de barrera de vapor wedi.

Debe enlosarse no más de 5 días después de que se haya aplicado la

segunda y última capa y se haya dejado endurecer durante 3.5 horas.

Si es necesario esperar más tiempo para empezar a enlosar, debe darse

a la superficie una textura más áspera mediante una lija fina para lograr

una mejor adhesión y, posteriormente, debe eliminarse el polvo. Debe

instalarse una nueva capa superficial de la barrera de vapor wedi como

superficie de imprimación de 8 milésimas de pulgada (203 micras) de

espesor máximo. La capa de imprimación debe dejarse secar 3.5 horas

y puede enlosarse nuevamente en un lapso de 5 días.

Antes de enlosar, aplique en todas las superficies interiores wedi de

las saunas. Los componentes A y B de la barrera de vapor se sumi-

nistran en cantidades medidas previamente. Agregue el componente B

al componente A perforando la parte superior (membrana de goma) y

la parte inferior del componente B. Asegúrese de sacar completamente

el componente B del recipiente. Siempre mezcle un kit completo en las

proporciones indicadas. No intente cambiar las proporciones de mezcla.

Mezcle solo la cantidad que pueda aplicar durante el tiempo de empleo

útil. Revuelva la mezcla unos 5 minutos hasta lograr una consisten-

cia homogénea, uniforme, valiéndose de un taladro de baja velocidad

(aprox. 300 r/min) con una cuchilla de acero pulido Jiffy limpia. Evite

atrapar aire. Asegúrese de revolver bien el material del fondo y de los

lados del cubo. Tras mezclar, transfiéralo a un recipiente metálico limpio

y vuela a mezclarlo cuidadosamente unos 30 segundos más. No mezcle

demasiado rápido para evitar atrapar aire. Vierta completamente el pro-

ducto mezclado en una charola metálica para pintar. Utilice un rodillo

que no deje pelusa o una espátula dentada de goma para aplicar en el

sustrato wedi limpio. Es necesaria una aplicación minuciosa de 2 capas

con un tiempo de secado entre capas de aproximadamente 30 minutos.

01 0302 04

34 35

Más asientos y bancos de ducha prefabricados wedi

Los asientos y los bancos de ducha prefabricados wedi se instalan mucho más rápida y fácilmente que los asientos de concreto o charola de metal.

Además, se adhieren correctamente al mortero cola y son 100 % impermeables gracias a su núcleo de espuma de celdas cerradas de poliestireno

extruido, que se fabrica sin CFC y no contiene HBCD. No producen eflorescencia o decoloración ni presentan problemas de impermeabilización, como

sí se observan frecuentemente en algunos productos, entre ellos, los que requieren relleno de mortero. Constituyen la solución de asiento impermeable

perfecta para su ducha. Los asientos esquineros suspendidos prefabricados wedi no requieren que se instale entramado adicional en la estructura. Sus

soportes de montaje se sujetan a los montantes ya existentes.

Muy resistentes:

soportan cargas de

hasta 150 kg (350 lb)

Bancos wedi Sanoasa

Cada quien tiene su propio concepto de comodidad. Sin embargo, todos disfrutan la muy placentera experiencia de relajarse tranquilamente sentados

en la ducha. Los bancos wedi Sanoasa ofrecen abundante espacio donde relajarse cómodamente y mimar cuerpo y mente en su propio templo de

bienestar. Esta inteligente estructura permite una libertad de diseño visual inigualable; tanto las áreas de asiento como los elementos portantes no solo

pueden ubicarse como se prefiera, sino que también permiten modificar a conveniencia sus formas y tamaños. Los bancos se fijan a las superficies de

las paredes y el piso de la ducha mediante el sellador de juntas wedi o, si se ha abierto un espacio en el piso por tratarse de un piso de ducha inclinado,

se usa mortero cola para rellenar el espacio y se aplica cinta de malla sobre el mortero cola o la unión del piso y el banco.

Elemento portante muy

estable, disponible en

dos anchuras

Banco con

pendientes

Núcleo de poliestireno extruido

100 % impermeable

32 33

X+1 mm

5 – 25 mm

CLICK!

05 06 0807

09 10 11

X+1 mm

Cubierta de canal lineal versión enlosable

01 02 0403

05 06 0807

09 10 11

Después de instalar

Todas las juntas o uniones visibles de la instalación deben cubrirse y reforzarse de manera evidente aplicando y allanando sellador de juntas wedi sobre

las uniones. El sellador de juntas wedi debe cubrir todas las uniones al menos de 0.75 in (19 mm) a 1 in (25 mm) por cada lado de la junta. Para garan-

tizar su resistencia, el sellador de juntas no debe tener menos de 0.0625 in (2 mm) de espesor. No añada cinta de malla al sellador de juntas wedi. Solo

comprometería el efecto impermeabilizante y no reforzaría la resistencia del sistema frente a los esfuerzos relacionados con el movimiento. El sistema

de ducha puede someterse a una prueba de inundación una vez transcurridas 2 horas de haber terminado de aplicar el sellador de juntas wedi en todas

sus uniones. No deben emplearse adhesivos orgánicos premezclados en los sistemas wedi que vayan a instalarse en espacios húmedos. Las losetas de

cerámica menores de 2 in x 2 in (51 mm x 51 mm) pueden pegarse con mortero cola modificado y compactarse con lechada de cemento modificada

con polímeros. Las losetas de cerámica menores de 1 in x 1 in (25 mm x 25 mm) deben pegarse con mortero cola epóxico y compactarse con lechada

epóxica. Las losetas que no estén en ángulo recto deben colocarse correspondientemente; el lado más corto de la loseta determinará la disposición

correcta de los materiales. Los cantos rodados pueden colocarse y compactarse mediante morteros cola y lechadas de cemento modificado o mediante

mortero cola y lechada epóxicos o mediante una combinación de ellos. El sistema wedi Fundo Riolito neo puede llevar losetas de formato mayor de

2 in

(13 cm

). Deben recortarse para que sus juntas de colocación se alineen respecto a las pendientes de la base de ducha wedi (donde se encuentran

los planos de las pendientes).

Cubierta de canal lineal versiones estándar y exclusiva

01 02 0403

CLICK!

5 – 25 mm

Instrucciones de instalación de la tapa de drenaje wedi Fundo Riolito neo

Tapa de drenaje estándar Fundo Riolito

neo: Versión estándar de acero inoxi

dable pulido de alta calidad

Tapa de drenaje exclusiva Fundo

Riolito neo: Versión enchapada en

acero inoxidable de doble espesor de

alta calidad

Tapa de drenaje enlosable Fundo

Riolito neo: Puede enlosarse con ad-

hesivo o pegamento epóxicos o sella-

dor de juntas wedi. Puede usarse con

losetas o piedras de 0.25 in (6 mm)

y 0.5 in (13 mm) (cubierta opuesta)

La tapa de drenaje puede ajustarse de

+5 mm a +25 mm respecto a la su-

perficie de la base Riolito neo. Los so-

portes de la tapa pueden extenderse

hasta la altura necesaria mediante la

llave allen incluida en la caja. Además,

los soportes pueden recortarse por las

líneas de corte prefabricadas antes de

montar con la llave allen.

30 31

05 06

Extienda nuevamente el mortero cola sobre el lado posterior del módulo "Dre-

naje" de Fundo Riolito neo con una llana ranurada de 0.25 in x 0.25 in (6 mm x

6 mm). Presione el módulo "Drenaje Lineal" de Fundo Riolito neo en el mort

ero

cola de modo que la junta de estanqueidad pase suavemente al interior del

cuerpo del drenaje sin contaminación a través del mortero cola. Asegúrese de

que toda la contraparte inferior cementada del módulo de drenaje wedi esté

soportada o recubierta de mortero cola. NO pise el módulo de drenaje con la

intención de presionarlo o conectarlo al cuerpo del drenaje o el mortero. Apli

que un cordón de sellador de juntas de 0.5 in (13 mm) en la canal de ranura

en Z del módulo e introduzca el segundo módulo, es decir, la "extensión".

Una vez recortado de acuerdo con la longitud que interese, instale también el

módulo de "extensión" con mortero cola mediante la misma técnica que se

indica en 4. Aplique un cordón de sellador de juntas wedi de 0.5 in (13 mm)

sobre la unión de los dos módulos y allane con una espátula. Aplique peso.

Extienda un cordón continuo de 0.5 in (13 mm) de sellador de juntas

wedi por la canal de contorno y solo en aquellas zonas que le permitan

colocar inmediatamente un panel de construcción wedi en el sellador

fresco. Introduzca completamente el panel wedi en la canal de la base

de ducha y su cordón de sellador. Use la espátula para allanar todo

resto de sellador que se haya salido en la unión interior. Fije los paneles

directamente sobre los montantes comenzando a un pie (300 mm) por

encima de la base e instalando un afianzador cada pie (300 mm) de

distancia. Debe instalarse un afianzador adicional en la unión con el

siguiente panel para lograr una transición pareja.

09 10 11

Aplique cordones continuos de 0.5 in (13 mm) de sellador entre todas

las conexiones de los paneles e instale de manera que queden uniones

perfectamente juntas. El exceso de sellador debe allanarse con una es

pátula. Debe aplicarse y allanarse un segundo cordón de 0.5 in (13 mm)

de sellador en todas las uniones y las cabezas de los afianzadores. Debe

cubrirse de 0.75 in a 1 in (19 mm a 25 mm) por cada lado de las uniones.

Todos los afianzadores y arandelas deben cubrirse con sellador de manera

que se extienda una pulgada (25 mm) sobre los bordes de las arandelas.

Instale los nichos wedi en cor-

tes de la pared wedi y fíjelos

colocando la brida en el cen-

tro de los montantes de 16 in

(406 mm) de centro a centro.

Coloque el sellador wedi a lo

largo de la conexión entre la

pared y el nicho.

Coloque 2 afianzadores a cada

lado del nicho para lograr una

transición nivelada entre los

paneles de pared. Extienda

otro cordón de 0.5 in (13 mm)

de sellador wedi sobre afianza-

dores y juntas.

Aplique un cordón continuo de sellador de 0.5 in (13 mm) en el interior

de la canal y a lo largo de la parte ranurada de sardinel vertical. Aplique un

círculo de 0.5 in (13 mm) de sellador sobre los paneles de pared a los que

se fija el sardinel (y) o sobre los correspondientes lados del sardinel. Aplique

en el contrapiso un lecho de mortero cola alisado con una llana ranurada de

0.5 in x 0.5 in (13 mm x 13 mm). Presione el sardinel —recortado precisa-

mente a la medida— en la conexión. Aplique peso sobre el sardinel y sus

lados (por fuera) y aplique y allane otro cordón de 0.5 in (13 mm) de sellador

en todas las uniones del sardinel. Deben cubrirse de 0.75 in a 1 in (19 mm

a 25 mm) por cada lado de las uniones.

0807

Las muescas de conexión del sardinel deben recortarse precisa-

mente de modo que queden a la medida de las bases Riolito neo.

Para que la instalación funcione correctamente, es imprescindible im

permeabilizar todos los puntos de infiltración de líquido de los produc-

tos wedi, p. ej., válvulas y alcachofas de ducha, mediante las juntas de

estanqueidad adecuadas para la aplicación. El collarín wedi Flexi Collar

para válvula mezcladora y el collarín wedi Flexi Collar (para salientes

de tubería de ducha de 0.5 in – 0.75 in [13 mm – 19 mm]) se emplean

en estas aplicaciones y están amparados por la garantía completa del

sistema wedi.

01 0302 04

Recorte la tubería de 2 in (51 mm) 1.25 in (32 mm) por debajo de la

superficie del contrapiso. Use el patrón de corte ovalado para recor-

tar el contrapiso con una sierra de vaivén y permitir la instalación del

sifón de drenaje wedi y su conexión a la tubería del piso mediante un

adecuado cemento cola compatible con tubería de ABS o multiusos.

Recomendamos verificar también la compatibilidad del cemento cola

con el material de la tubería del piso. El drenaje y el sifón deben fijarse

firmemente al contrapiso. El recorte de empotramiento del drenaje no

debe deformar el contrapiso. Monte la unidad de drenaje de acuerdo

con el plano de instrucciones. Las bases Riolito neo de wedi pueden

recortarse por todos sus lados al tamaño que interese para acercar los

drenajes a la pared tanto como sea posible. No perfore la brida plástica

de drenaje lineal integrada a la parte revestida de espuma de la base.

Una vez recortadas las canales de 0.5 in x 0.5 in (13 mm x 13 mm),

debe restablecerse el nuevo contorno de la base. Cuando recorte cerca

de la canal de drenaje, siempre debe dejar espuma wedi suficiente para

rehacer la canal de 0.5 in × 0.5 in (13 mm x 13 mm) que se requiere.

Pegue y selle el sifón de drenaje wedi a la tubería de 2 in (51 mm) apli-

cando un cemento cola disolvente adecuado a los elementos plásticos

correspondientes. Monte el collarín de estanqueidad en la contraparte

inferior de la unidad wedi Fundo Riolito neo Modular valiéndose de un

desarmador manual phillips.

Aplique una capa fina de mortero cola y finalmente un lecho de mor-

tero cola alisado usando mortero cola modificado (ANSI 118.4) y una

llana ranurada de 0.25 in x 0.25 in (6 mm x 6 mm). Hay varias formas

de garantizar una adhesión efectiva de la base wedi al contrapiso. Es

necesario que el lecho de asiento tenga un espesor mínimo de 0.19 in

(5 mm) y máximo de 0.31 in (8 mm) (comprimido). Los mejores procedi-

mientos recomiendan aplicar mortero cola tanto en la base wedi como

en el contrapiso para garantizar la adhesión de toda la superficie. wedi

recomienda recortar ambos módulos de piso y ajustarlos en seco a las

dimensiones del cuarto de ducha y la posición del drenaje.

*Instalaciones en Australia y Nueva Zelanda: Consulte los manuales de instalación que indiquen los correspondientes requisitos en cuanto a la obra y los drenajes wedi.

Instalación de wedi Fundo

Riolito neo Modular*

Antes de instalar:



Haga instalar entramados de 2 in × 4 in (51 mm x 102 mm) adiciona-

les sobre la chapa inferior entre los montantes para soportar el panel

de construcción wedi en el área de transición de la base de ducha.



El contrapiso debe ser estable, nivelado y capaz de soportar carga,

y debe cumplir con los límites de deformación máximos de L/360 y

los requisitos que dicta el Código Residencial Internacional. Los sus-

tratos estructurales de madera o concreto deben estar secos y tener

la capacidad suficiente para soportar cargas dinámicas y estáticas. La

estructura de madera y acero debe tener la capacidad de carga sufi-

ciente y debe estar a plomo y en ángulo recto. El montaje de drenaje

por debajo del piso debe estar estabilizado, fijo y apoyado en su lugar,

y no deberá hundirse por acción de la carga de agua.



Solo deben utilizarse productos wedi (paneles de construcción, sar-

dinel, sellador de juntas y afianzadores) para el montaje del sistema

de ducha wedi Fundo.



El instalador debe haber recibido instrucciones del personal técnico

de ventas de wedi o haber sido informado de los procedimientos de

instalación correctos según se han descrito.



Las bases de ducha wedi pueden recortarse del tamaño que interese

con una sierra circular eléctrica. Se debe rehacer la canal de la muesca

en Z y eliminar los restos de aserrín o cualquier otra materia conta-

minante posible.

28 29

Collarín de

estanqueidad

wedi Fundo Riolito neo Modular

Sardinel

Cuerpo de drenaje

Panel de

construcción

Tornillos

Soluciones de piso para duchas de drenaje lineal

Componente 2:

Módulo de extensión

Fundo Riolito neo: Núcleo

de espuma de poliestireno

extruido de celdas cerradas

wedi de interior 100 %

impermeable, a prueba de

moho y aislante

Componente 1: Módulo de línea

Fundo Riolito neo: Multifuncional

y personalizable de acuerdo con

las exigencias del usuario

Montaje del drenaje en la base

wedi Fundo Riolito neo Modular

El sistema Fundo Riolito neo de wedi cuenta con el único montaje de drenaje impermeable completamente sellado e integrado en fábrica que ofrece el

mercado de sistemas de piso de ducha personalizables con drenaje lineal.

Se ofrecen dos opciones de diseño. La primera comprende modelos con una base de ducha de una pieza que incluye la zanja de drenaje. Estos modelos

tienen pendientes unidireccionales o cuatridireccionales. La segunda opción, Riolito neo Modular, está diseñada para ofrecer mayor flexibilidad, pues

consta de dos elementos básicos: un módulo lineal que consiste en un drenaje de zanja integrado a un módulo de base wedi, y el otro, que consiste

en un panel de extensión inclinado. El drenaje puede instalarse cerca de la pared, o dos módulos de extensión parten de cualquiera de los lados de un

drenaje central. Los módulos lineales también pueden usarse en aplicaciones de ducha con lecho de mortero (que debe impermeabilizarse localmente

mediante la membrana Subliner Dry conectada al módulo lineal Riolito neo).

26 27

Extienda nuevamente el mortero cola sobre el lado posterior de la unidad

Fundo con una llana ranurada de 0.25 in x 0.25 in (6 mm x 6 mm). Pre-

sione la unidad Fundo firmemente en el lecho de mortero cola y verifique

que la instalación esté nivelada y no tenga espacios vacíos. Asegúrese de

que la junta de estanqueidad del drenaje wedi se introduzca firmemente

en el sifón wedi sin posibilidad alguna de que el mortero haya sido pre-

sionado al interior de esta área de conexión. Aplique un poco de peso

uniformemente durante al menos 30 minutos (bolsas de mortero cola).

NO pise el módulo de drenaje con la intención de presionarlo o conec-

tarlo al cuerpo del drenaje o al mortero.