Yamaha SH2 El manual del propietario

Marca: Yamaha

Modelo: SH2

Tipo: El manual del propietario

SH2

Owner’s Manual

Mode d’emploi

Manual de instrucciones

Bedienungsanleitung

Manuale di istruzioni

툲󻼰튪찋튢

Before using the instrument, be sure to read “PRECAUTIONS” on pages 7-8.

Avant d’utiliser cet instrument, lisez attentivement la section « PRÉCAUTIONS D’USAGE » aux pages 7-8.

Antes de utilizar el instrumento, lea la sección “PRECAUCIONES”, en las páginas 7-8.

Achten Sie darauf, vor Einsatz dieses Instruments die „VORSICHTSMASSNAHMEN“ auf Seiten 7-8 durchzulesen.

Prima di utilizzare lo strumento, assicurarsi di leggere la sezione “PRECAUZIONI”, alle pagine 7 - 8.

훋뾶쬂툲󻼰뾶󼂋흖ˊ󻿻󼉇󻿟훎󼂋󼆃󻿟툲󻿋삳󼀄󻿃푳푢힪

SH2 Owner’s Manual

For the instrument

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply

(adapter). DO NOT connect this product to any power supply or

adapter other than one described in the manual, on the name

plate, or specifically recommended by Yamaha.

WARNING: Do not place this product in a position where

anyone could walk on, trip over, or roll anything over power or

connecting cords of any kind. The use of an extension cord is

not recommended! If you must use an extension cord, the mini-

mum wire size for a 25’ cord (or less) is 18 AWG. NOTE: The

smaller the AWG number, the larger the current handling capac-

ity. For longer extension cords, consult a local electrician.

This product should be used only with the components supplied

or; a cart, rack, or stand that is recommended by Yamaha. If a

cart, etc., is used, please observe all safety markings and

instructions that accompany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be cor-

rect at the time of printing. However, Yamaha reserves the right

to change or modify any of the specifications without notice or

obligation to update existing units.

This product, either alone or in combination with an amplifier and

headphones or speaker/s, may be capable of producing sound

levels that could cause permanent hearing loss. DO NOT oper-

ate for long periods of time at a high volume level or at a level

that is uncomfortable. If you experience any hearing loss or ring-

ing in the ears, you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period

before damage occurs.

Some Yamaha products may have benches and / or accessory

mounting fixtures that are either supplied with the product or as

optional accessories. Some of these items are designed to be

dealer assembled or installed. Please make sure that benches

are stable and any optional fixtures (where applicable) are well

secured BEFORE using.

Benches supplied by Yamaha are designed for seating only. No

other uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to

how a function or effect works (when the unit is operating as

designed) are not covered by the manufacturer’s warranty, and

are therefore the owners responsibility. Please study this manual

carefully and consult your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and

environmentally friendly. We sincerely believe that our products

and the production methods used to produce them, meet these

goals. In keeping with both the letter and the spirit of the law, we

want you to be aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery

which (if applicable) is soldered in place. The average life span

of this type of battery is approximately five years. When replace-

ment becomes necessary, contact a qualified service represen-

tative to perform the replacement.

This product may also use “household” type batteries. Some of

these may be rechargeable. Make sure that the battery being

charged is a rechargeable type and that the charger is intended

for the battery being charged.

When installing batteries, never mix old batteries with new ones,

and never mix different types of batteries. Batteries MUST be

installed correctly. Mismatches or incorrect installation may

result in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep

all batteries away from children. Dispose of used batteries

promptly and as regulated by the laws in your area. Note: Check

with any retailer of household type batteries in your area for bat-

tery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for

some reason its useful life is considered to be at an end, please

observe all local, state, and federal regulations that relate to the

disposal of products that contain lead, batteries, plastics, etc. If

your dealer is unable to assist you, please contact Yamaha

directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The

model number, power requirements, etc., are located on this

plate. The serial number is located behind the control unit. You

should record the model number, serial number, and the date of

purchase in the spaces provided below and retain this manual

as a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom_silent)

SH2 Owner’s Manual

For the instrument

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

COMPLIANCE INFORMATION STATEMENT(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party: Yamaha Corporation of America

Address: 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone: 714-522-9011

Type of Equipment: Silent Piano

Model Name: C1XSH2, C2XSH2, C3XSH2, C5XSH2, C6XSH2, C7XSH2,

GC1MSH2, GC2SH2, S3XSH2, S5XSH2, S6XSH2, S7XSH2,

U1SH2, U3SH2, YUS1SH2, YUS3SH2, YUS5SH2

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including interference that may cause undesired operation.

See user manual instructions if interference to radio reception is suspected.

(FCC DoC)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifica-

tions not expressly approved by Yamaha may void your

authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could

void your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15 for

Class “B” digital devices. Compliance with these require-

ments provides a reasonable level of assurance that your

use of this product in a residential environment will not result

in harmful interference with other electronic devices. This

equipment generates/uses radio frequencies and, if not

installed and used according to the instructions found in the

users manual, may cause interference harmful to the opera-

tion of other electronic devices. Compliance with FCC regula-

tions does not guarantee that interference will not occur in all

installations. If this product is found to be the source of inter-

ference, which can be determined by turning the unit “OFF”

and “ON”, please try to eliminate the problem by using one of

the following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to distrib-

ute this type of product. If you can not locate the appropriate

retailer, please contact Yamaha Corporation of America,

Electronic Service Division, 6600 Orangethorpe Ave, Buena

Park, CA90620

The above statements apply ONLY to those products distrib-

uted by Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

For the AC adaptor and the instrument

SH2 Owner’s Manual

The model number, power requirements, etc., are located on the

name plate, which is at the bottom of the control unit. The serial num-

ber is located behind the control unit. You should note this serial num-

ber in the space provided below and retain this manual as a

permanent record of your purchase to aid identification in the event of

theft.

Model No.

Serial No.

(bottom_en_silent)

The name plate is located on the bottom of the unit.

La plaque signalétique de ce produit se trouve dans le bas de l'unité.

La placa del nombre se encuentra en la parte inferior de la unidad.

Das Namensschild befindet sich an der Unterseite des Produkts.

La targhetta del nome si trova sul fondo dell'unità.

명판은 제품 밑면에 부착되어 있습니다 .

Le numéro de modèle de l'appareil, ses besoins en alimentation ainsi

que d'autres informations le concernant figurent sur sa plaque

signalétique, qui se trouve en bas de l'unité de commande. Le numéro

de série est indiqué à l’arrière de l’unité de commande. Notez ce

numéro de série dans l'espace fourni ci-dessous et conservez le

présent manuel comme preuve permanente de votre achat afin de

faciliter l'identification du produit en cas de vol.

N° de modèle

N° de série

(bottom_fr_silent)

El número de modelo, los requisitos de alimentación, etc. se

encuentran en la placa de denominación, que está en la parte inferior

de la unidad de control. El número de serie se encuentra detrás de la

unidad de control. Debe anotar este número de serie en el espacio

que se proporciona a continuación y conservar este manual como un

registro permanente de su compra para facilitar la identificación en

caso de robo.

Nº de modelo

Nº de serie

(bottom_es_silent)

Modellnummer, Leistungsbedarf usw. sind auf dem Namensschild

aufgeführt, das sich an der Unterseite der Steuereinheit befindet. Die

Seriennummer befindet sich an der Rückseite der Steuereinheit. Für

den Fall eines Diebstahls sollten Sie diese Seriennummer im unten

vorgesehenen Feld eintragen und diese Anleitung als dauerhaften

Kaufnachweis aufbewahren.

Modell Nr.

Seriennr.

(bottom_de_silent)

Il numero del modello, i requisiti di alimentazione, ecc… si trovano

sulla piastrina posizionata nella parte inferiore dell'unità di controllo. Il

numero di serie si trova dietro l'unità di controllo. Si consiglia di

riportare il numero di serie nell'apposito spazio di seguito e di

conservare questo manuale come prova di acquisto permanente, al

fine di consentire l'identificazione in caso di furto.

Numero del modello

Numero di serie

(bottom_it_silent)

본 제품의 모델 번호 , 전원 규격 등은 기기 밑면에 있는

명판에서 확인할 수 있습니다 . 일련 번호는 기기 후면에

있습니다 . 도난 시 확인할 수 있도록 일련 번호를 아래 공란에

기입하고 본 사용설명서를 구매 기록으로 영구 보관해야

합니다 .

모델 번호

일련 번호

(bottom_ko_silent)

SH2 Owner’s Manual

English

Table of Contents

PRECAUTIONS...........................................................7

NOTICE ........................................................................9

About the Manuals ....................................................10

Included Accessories .................................................10

Features........................................................................11

Chapter 1 Getting Started ................... 12

Part names and functions .........................................12

Turning the power on/off .........................................15

Using headphones......................................................16

Chapter 2 Playing with the Silent Piano™

Function.............................. 17

Using the Silent Piano™ function .............................17

Selecting Voices..........................................................18

Chapter 3 Playing Back and Recording

Songs................................... 20

Playing back Songs.....................................................20

Recording your performance ...................................24

Handling User Song files...........................................27

Chapter 4 Using Convenient Functions

(UTILITY) .......................... 30

Enhancing the sound with Reverb...........................30

Using the metronome................................................32

Customizing with the various Function parameters

(Function settings).....................................................34

Chapter 5 Connecting to Other Devices

............................................. 45

Connecting USB devices...........................................45

Connecting to external audio devices ..................... 47

Connecting to external MIDI devices.....................49

Connecting to a computer/smart device ................50

Chapter 6 Using Other Functions....... 54

Backup data and initialization..................................54

Setting the Character Code for file names..............55

Chapter 7 Appendix ............................ 56

Message List................................................................56

Troubleshooting.........................................................58

Voice List.....................................................................60

Song List......................................................................62

Playback sequence of Song files in a USB flash drive

......................................................................................64

Specifications..............................................................65

Index ............................................................................67

SH2

Owner’s Manual

SH2 Owner’s Manual

(weee_eu_en_02)

Information for users on collection and disposal of old equipment:

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should

not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your

national legislation.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human

health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service

or the point of sale where you purchased the items.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and

ask for the correct method of disposal.

For the AC adaptor

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

(can_b_02)

CAN ICES-3 (B)/NMB-3(B)

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol within

an equilateral triangle is intended to alert the user

to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the presence

of important operating and maintenance

(servicing) instructions in the literature

accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has

two blades and a third grounding prong. The wide blade

or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use caution

when moving the cart/apparatus

combination to avoid injury from

tip-over.

13 Unplug this apparatus during lightning storms or when

unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally,

or has been dropped.

(UL60065_03)

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

SH2 Owner’s Manual

English

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

• This AC adaptor is designed for use with only Yamaha electronic

devices. Do not use for any other purpose.

• Indoor use only. Do not use in any wet environments.

CAUTION

• When setting up, make sure that the AC outlet is easily accessible. If

some trouble or malfunction occurs, immediately turn off the power

switch of the instrument and disconnect the AC adaptor from the

outlet. When the AC adaptor is connected to the AC outlet, keep in

mind that electricity is flowing at the minimum level, even if the

power switch is turned off. When you are not using the instrument

for a long time, make sure to unplug the power cord from the wall

AC outlet.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or

radiators. Also, do not excessively bend or otherwise damage the

cord, or place heavy objects on it.

• Only use the voltage specified as correct for the instrument. The

required voltage is printed on the name plate of the instrument.

• Use the specified adaptor (page 66) only. Using the wrong adaptor

can result in damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust

which may have accumulated on it.

• Unplug the power cord from the AC outlet when cleaning the

instrument.

• This instrument contains no user-serviceable parts. Do not open the

instrument or attempt to disassemble or modify the internal

components in any way. If it should appear to be malfunctioning,

discontinue use immediately and have it inspected by qualified

Yamaha service personnel.

• Radio waves may affect electro-medical devices.

- Do not use this product near medical devices or inside areas in

which the use of radio waves is restricted.

- Do not use this product within 15cm (6 in.) of persons with a heart

pacemaker implant.

• Do not expose the instrument to rain, use it near water or in damp or

wet conditions, or place on it any containers (such as vases, bottles

or glasses) containing liquids which might spill into any openings.

If any liquid such as water seeps into the instrument, turn off the

power immediately and unplug the power cord from the AC outlet.

Then have the instrument inspected by qualified Yamaha service

personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a fire.

• When one of the following problems occur, immediately turn off the

power switch and disconnect the electric plug from the outlet. Then

have the device inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

For the AC adaptor

For the instrument

Power supply/AC adaptor

Do not open

Location

Water warning

Fire warning

If you notice any abnormality

DMI-5 1/2

SH2 Owner’s Manual

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a

multiple-connector. Doing so can result in lower sound quality, or

possibly cause overheating in the outlet.

• When removing the electric plug from the instrument or an outlet,

always hold the plug itself and not the cord. Pulling by the cord can

damage it.

• Remove the electric plug from the outlet when the instrument is not

to be used for extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might

accidentally fall over.

• Before moving the instrument, remove all connected cables, to

prevent damage to the cables or injury to anyone who might trip

over them.

• When moving the instrument, be careful to avoid catching your

hands or feet on the instrument.

• Move the instrument slowly with extra care to keep the instrument

from falling over, or bumping against the surroundings. We

recommend that you consult a qualified carrier to transport or move

the instrument.

• When setting up the product, make sure that the AC outlet you are

using is easily accessible. If some trouble or malfunction occurs,

immediately turn off the power switch and disconnect the plug from

the outlet. Even when the power switch is turned off, electricity is

still flowing to the product at the minimum level. When you are not

using the product for a long time, make sure to unplug the power

cord from the wall AC outlet.

• Before connecting the instrument to other electronic components,

turn off the power for all components. Before turning the power on

or off for all components, set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum

levels and gradually raise the volume controls while playing the

instrument to set the desired listening level.

• Do not insert a finger or hand in any gaps on the fallboard or

instrument. Also take care that the fallboard does not pinch your

finger.

• Never insert or drop paper, metallic, or other objects into the gaps or

opening on the main unit, fallboard, or keyboard. This could cause

physical injury to you or others, damage to the instrument or other

property, or operational failure.

• Do not rest your weight on, or place heavy objects on the

instrument, and do not use excessive force on the buttons, switches

or connectors.

• Do not use the instrument/device or headphones for a long period of

time at a high or uncomfortable volume level, since this can cause

permanent hearing loss. If you experience any hearing loss or

ringing in the ears, consult a physician.

• Close the fallboard when the instrument is not in use. Hold the

fallboard with both hands when opening or closing it. Be careful to

avoid catching fingers (yours or others) between the fallboard and

the main unit.

• Do not go near the instrument during an earthquake. Strong shaking

during an earthquake could cause the instrument to move or tip

over, resulting in damage to the instrument or its parts, and possibly

causing injury.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

Power supply/AC adaptor

Location

Connections

Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

DMI-5 2/2

SH2 Owner’s Manual

English

NOTICE

To avoid the possibility of malfunction/ damage to

the product, damage to data, or damage to other

property, follow the notices below.

 Handling

• Do not connect this product to public Wi-Fi and/or

Internet directly. Only connect this product to the

Internet through a router with strong password-

protections. Consult your router manufacturer for

information on security best practices.

• Do not use the instrument in the vicinity of a TV, radio,

stereo equipment, mobile phone, or other electric

devices. Otherwise, the instrument, TV, or radio may

generate noise. When you use the instrument along with

a smart device, such as an iPhone, iPad, etc., we

recommend that you set that device’s “Airplane Mode” to

on and then the Wi-Fi/Bluetooth setting to on in order

to avoid noise caused by communication.

• Do not expose the instrument to excessive dust or

vibrations, or extreme cold or heat (such as in direct

sunlight, near a heater, or in a car during the day) to

prevent the possibility of panel disfiguration, damage to

the internal components or unstable operation.

• Do not place vinyl, plastic or rubber objects on the

instrument, since this might discolor the panel or

keyboard.

• Bumping the surface of the instrument with metal,

porcelain, or other hard objects can cause the finish to

crack or peel. Use caution.

• Do not drag the instrument when moving it. Doing so

may damage the floor.

 Maintenance

• When cleaning the instrument, use a soft and dry cloth.

Do not use paint thinners, solvents, alcohol, cleaning

fluids, or chemical-impregnated wiping cloths.

• Gently remove dust and dirt with a soft cloth. Do not

wipe too hard since small particles of dirt can scratch the

instrument’s finish.

• During extreme changes in temperature or humidity,

condensation may occur and water may collect on the

surface of the instrument. If water is left, the wooden

parts may absorb the water and be damaged. Make sure

to wipe any water off immediately with a soft cloth.

 Saving data

• The MIDI Song recorded to this instrument (page 20)

are retained when the power is turned off. However, the

saved data may be lost due to some failure, an operation

mistake, etc. Save your important data onto an external

device such as a computer (page 50).

• To protect against data loss through USB flash drive

damage, we recommend that you save your important

data onto spare USB flash drive or an external device

such as a computer as backup data.

Information

 About copyrights

• Copying of the commercially available musical data

including but not limited to MIDI data and/or audio

data is strictly prohibited except for your personal use.

• This product incorporates and bundles contents in

which Yamaha owns copyrights or with respect to which

Yamaha has license to use others' copyrights. Due to

allowed to distribute media in which these contents are

saved or recorded and remain virtually the same or very

similar to those in the product.

* The contents described above include a computer

program, Accompaniment Style data, MIDI data,

WAVE data, voice recording data, a score, score data,

etc.

* You are allowed to distribute medium in which your

performance or music production using these contents

is recorded, and the permission of Yamaha

Corporation is not required in such cases.

 About functions/data bundled with

the instrument

• Some of the preset songs have been edited for length or

arrangement, and may not be exactly the same as the

original.

 About this manual

• The illustrations as shown in this manual are for

instructional purposes only, and may appear somewhat

different from those on your instrument.

• Windows is a registered trademark of Microsoft®

Corporation in the United States and other countries.

• iPhone, iPad and iPod touch are trademarks of Apple

Inc., registered in the U.S. and other countries.

• The Bluetooth® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Yamaha Corporation is under license.

• The company names and product names in this manual

are the trademarks or registered trademarks of their

respective companies.

 About Bluetooth communications

• The 2.4 GHz band used by Bluetooth compatible devices

is a radio band shared by many types of equipment.

While Bluetooth compatible devices use a technology

minimizing the influence of other components using the

same radio band, such influence may reduce the speed

or distance of communications and in some cases

interrupt communications.

• The speed of signal transfer and the distance at which

communication is possible differs according to the

distance between the communicating devices, the

presence of obstacles, radio wave conditions and the

type of equipment.

• Yamaha does not guarantee all wireless connections

between this unit and devices compatible with Bluetooth

function.

SH2 Owner’s Manual

Thank you for choosing the Yamaha Silent Piano™. This instrument is equipped with the same keyboard

mechanisms as an acoustic piano. However, you can play with the sound muted, and use various functions not

available on an acoustic piano, such as changing Voices or recording your performance. This manual mainly

explains these functions as a Silent Piano. In order to make the most of the performance potential and features

of the instrument, please read the manuals thoroughly, and keep them in a handy place for later reference.

About the Manuals

This instrument has the following documents and instructional materials.

 Included Documents

Owner’s Manual (this book)

This manual mainly describes how to use

the particular functions for the Silent

Piano™ which can be used when the power

is turned on. For information on handling

as an acoustic piano, refer to the separate

manual for the piano.

 Online Materials (downloadable

from the website)

iPhone/iPad Connection Manual

(only in English, French, German

and Spanish)

Explains how to connect the instrument to

smart devices, such as an iPhone, iPad, etc.

Computer-related Operations

Includes instructions on connecting this

instrument to a computer, and operations

related to transferring data.

MIDI Reference

Contains MIDI related information.

To obtain these manuals, access the Yamaha Downloads, enter the model name for searching the desired files.

Included Accessories

• Owner’s Manual (this book) x 1

•AC adaptor* x 1

•Power cord* x 1

•Headphones x 1

•Headphone hanger x 1

• Attachment screws for headphone hanger x 2

•

“50 Classical Music Masterpieces” music book

x 1

*May not be included depending on your area. Check with your Yamaha dealer.

Yamaha Downloads

http://download.yamaha.com/

SH2 Owner’s Manual

English

Features

• Silencing System enables you play in any situation, at any time you want

Yamaha’s innovative silencing system brings you superior performance, yet with virtually complete silence.

Enjoy your performance just as if you were playing an acoustic piano—but without the need to worry about

bothering people around you.

• Non-contact sensors for maximum expressiveness

The non-contact optical sensors faithfully detect subtle movement of the keys without affecting the touch of

the keys. They catch keystroke information precisely, enabling you to perform with rich nuance and

extraordinarily subtle expression.

• Elegant, integrated design

The control unit has been given a graceful design that unobtrusively blends with the piano itself. Moreover, the

simple controllers allow you to operate the instrument easily.

• Realistic ambience of the Voices enhances your performance

This instrument puts the sound of 20 luxurious, authentic Voices at your fingertips. These include Yamaha’s

flagship CFX piano—which delivers dynamic sound, from a brilliant high-range to powerful bass—and the

Bösendorfer* Imperial, a world-class piano renowned for its subtle and warm sound. The instrument also

features advanced technologies such as Binaural Sampling. Listening with headphones to a piano Voice

enhanced through these methods gives the impression of being thoroughly immersed in the sound, as if it was

actually emanating from the piano.

Altogether, it delivers real sound faithful to that of an actual acoustic piano, such as the quick attack and the

graceful resonance of a sustained piano tone, as well as how the sound responds to your playing strength, and

the resonance effect when the damper pedal is pressed.

* Bösendorfer is a subsidiary company of Yamaha.

• Playback and recording functions for aid in learning and practice

You can record your performance to this instrument and a USB flash drive, and improve your performance by

listening back to the recording. This instrument also features a Bluetooth audio function, which allows you to

play along on this instrument with audio from a Bluetooth-equipped device, and even record the audio as an

audio Song.

Smart Device App “Smart Pianist”

The smart device app “Smart Pianist” (available as a free download) enables you to use the functions such

as selecting Voices, controlling the metronome intuitively with the visualized interface, or display the score

on your smart device.

For information about this app, access the following web page:

https://www.yamaha.com/kbdapps/

The connection wizard of the Smart Pianist helps you to connect this unit to your smart device properly. To

start connection wizard, tap [ ] (Menu) located upper left on the Smart Pianist screen to open the menu,

then tap “Instrument” followed by “Start Connection Wizard.”

Chapter

SH2 Owner’s Manual

1 Getting Started

Part names and functions

 Piano

DC IN jack

For connecting the supplied AC adaptor

(page 15).

Silencing lever

Activates the Silent Piano™ function.

 Pedals

Soft pedal

Reduces the volume and slightly changes the

timbre of the notes. The notes played before

this pedal is pressed are not affected.

Silencing pedal (for models not equipped

with a sostenuto pedal)

Activates the Silent Piano™ function by pressing

and sliding to the left.

Sostenuto pedal (for models equipped with a

sostenuto pedal)

Sustains the notes that are being played at that

time even after you release the keys.

Subsequently played notes are not affected.

Damper pedal

Sustains notes even after you release the keys.

When the Silent Piano™ function is enabled and

a piano Voice is selected, pressing this pedal

reproduces the complicated interaction of both

strings and soundboard resonance by the VRM

technology (page 40), and makes the sound

more like a real acoustic piano.

The damper pedal features an expressive half-

pedal function, and allows you to set the degree

to which pressing the damper pedal applies the

half-pedal effect (page 39) when using the

Silent Piano™ function.

Control unit

(page 13)

(on the rear of

the piano)

Control unit

(page 13)

Upright Piano Grand Piano

(for models

equipped with a

sostenuto pedal)

1 2 3

Upright Piano Grand Piano

English

SH2 Owner’s Manual

 Control unit

[PHONES] jacks

For connecting a pair of headphones with

stereo mini plug (page 16). Up to two

headphones can be connected.

USB [TO DEVICE] terminal

For connecting a USB flash drive or an optional

USB wireless LAN adaptor (page 45).

[Aco.] lamp (only for grand pianos)

When the lamp is lit, the sound is produced by

using the acoustic piano mechanics (page 17).

[] (Standby/On) switch

For turning the power on or setting to standby

(page 15).

Mode button

Each time you press this button, the mode

changes in the following order, and the lamp of

the selected mode lights up in orange.

• VOICE mode

For controlling the Voice (page 18).

•SONG mode

For recording your performance or playing

back preset Songs, recorded Songs, etc.

(page 20).

•UTILITY mode

For setting various convenient functions, such

as the metronome (page 30).

Button 1, Button 2, Button 3

Depending on the selected mode, different

functions are assigned and can be controlled by

pressing each button.

(Bluetooth) lamp

Lights up when the Bluetooth function is on

(page52). It lights up in blue when the

instrument is connected with a Bluetooth-

equipped device, and it lights up in white when

no Bluetooth-equipped device is connected

and while in the UTILITY mode.

Display

Indicates various setting values, such as Voice

number, Song number and other parameter

values.

1716

13 14

1 2 3

5 6

Front panel

Bottom panel

These buttons (and switch) are

pressed upward from the bottom.

(only for grand pianos)

SH2 Owner’s Manual

[VOICE/VALUE] control

Rotating this allows you to select desired Voices

or adjust the setting values. Depending on

particular functions, you may need to press this

to control the function.

[VOLUME] control

For adjusting the volume of the entire sound

output via the [PHONES] jack, AUX OUT

jacks, USB [TO HOST] terminal or Bluetooth.

(Only grand pianos) Pressing the control can

activate or deactivate the Silent Piano™

function (page 17).

AUX OUT [R]/[L/L+R] jacks

For connecting an external audio device and

output the sound of this unit to the device

(page 47).

MIDI [IN]/[OUT] terminals

For connecting an external MIDI device

(page 49).

[DC IN 16V] jack

(Upright piano) For connecting the power

cord. This is connected to the DC IN jack on

the rear of the piano when the instrument is

shipped.

(Grand piano) For connecting the supplied AC

adaptor (page 15).

[SENSOR] jack/ [MD/AMP] jack

(For qualified Yamaha personnel only.) These

connect to the sensor and to the internal unit.

The plugs are already connected when the

instrument is shipped.

[AUX IN] jack

For connecting an audio device such as a

portable music player and input the sound to

this unit (page 48).

USB [TO HOST] jack

For connecting to a computer or a smart device

(page 50).

Display

Indicates various values such as Song number

and Parameter value.

This display also indicates various messages

with the three characters. For details, refer to

page 56.

Song number Parameter value

English

SH2 Owner’s Manual

Turning the power on/off

CAUTION

Even when the instrument is turned off, electricity is still flowing to the instrument at the minimum level. When you

are not using the instrument for a long time or during electrical storms, make sure you unplug the AC power plug

from the wall AC outlet.

Connect the plugs of the AC adaptor in the order shown in the illustration.

Make sure to loop the power cord through the metal hook attached to the rear (for upright pianos) or

the bottom (for grand pianos) of the piano.

WARNING

Use the specified adaptor (page 66) only. Use of other adaptors may result in irreparable damage to both the

adaptor and the instrument.

CAUTION

When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble

or malfunction occurs, immediately turn the power off and disconnect the plug from the outlet.

NOTE

When disconnecting the AC adaptor, first turn the power off, and then follow the order shown above in reverse.

Press the [] (Standby/On) switch to turn the

power on.

The [ ] (Standby/On) lamp lights up.

To turn the power off, press the switch again.

NOTE

The sound will not be properly output if a key was pressed when the power was turned on. Do not touch any keys

when turning the power on.

1-2

1-1

1-4

1-2

1-1

1-3

1-4

Upright piano

Grand piano

DC IN jack

Hook is located on

the rear of the piano.

adaptor

Power cord

AC plug

AC outlet

[DC IN 16V] jack

AC outlet

AC plug

Power cord

adaptor

Hooks are located on the

bottom of the piano,

behind the control unit.

The shape of the plug and outlet differ depending on your locale.

SH2 Owner’s Manual

Using headphones

Connect a pair of headphones to the [PHONES] jack. Since this

instrument is equipped with two [PHONES] jacks, you can connect

two pairs of headphones. If you are using only one pair, insert the

plug into either of these jacks.

Even when listening through headphones, you can enjoy

exceptionally realistic, natural sound by Yamaha’s advanced

technologies, Binaural Sampling and Stereophonic Optimizer. For

details, refer to page 19.

CAUTION

• Do not use the headphones for a long period of time at a high or

uncomfortable volume level, since this can cause permanent hearing

loss.

• Be careful not to catch your foot on the headphone cord.

NOTICE

Do not pull the cord of the headphones or apply excessive force on the plug. This can damage the headphones and

result in sound degradation.

 Attaching the headphone hanger

Attach the headphone hanger to the bottom of the control unit with

the supplied two screws.

NOTICE

Do not hang anything other than the headphones on the hanger.

Otherwise, the instrument or the hanger may be damaged.

Auto Power Off function

To prevent unnecessary power consumption, this unit features an Auto Power Off function that

automatically turns the power off if the instrument is not operated for 30 minutes.

NOTICE

When the instrument is communicating with other devices or the Songs are played back, the power will not be

turned off automatically. Make sure to turn off the power by pressing the [] (Standby/On) switch when the

instrument is not in use.

Disabling Auto Power Off

Turn the power on while holding down the

lowest key (A-1). “PoF” appears on the display

and the unit starts up with the Auto Power Off

function disabled.

To turn the Auto Power Off function on or off

while the power is on, refer to page 43.

Lowest key (A-1)

Phone plug

(stereo mini)

Phillips-head (+) screwdriver

Chapter

English

SH2 Owner’s Manual

2 Playing with the Silent Piano™

Function

This instrument can be played both as a normal acoustic piano, and also as a Silent Piano™. Enabling the Silent

Piano™ function lets you take advantage of a variety of powerful functions—such as playing preset Voices built

into unit and recording your performances. Try out the Silent Piano™ function and explore the possibilities.

Using the Silent Piano™ function

Plug the headphones into the [PHONES] jack (page 16).

Rotate the [VOLUME] control to the far-left

position to set the volume to minimum.

Press the [] (Standby/On) switch to turn the power on.

Activate the Silent Piano™ function by one of the following operations.

These operations prevent the hammers from actually striking the strings.

(For upright pianos equipped with a sostenuto pedal)

• Pull the silencing lever towards you until you

hear a click and feel the mechanism catch.

(For upright pianos not equipped with a sostenuto pedal)

• Press the center pedal and slide it to the left.

(For grand pianos)

• Make sure that the [Aco.] lamp is

turned off.

If the lamp is lit, press the [VOLUME] control

to turn it off.

NOTE

For grand pianos, the Silent Piano™ function is activated (the [Aco.] lamp is off) automatically, when the power of the

unit is turned on. If you want to play an acoustic piano, turn the [Aco.] lamp on by pressing the [VOLUME] control.

Off

SH2 Owner’s Manual

Selecting Voices

When the Silent Piano™ function is enabled, you can select and play the various built-in preset Voices from the

keyboard. By default, the CFX Grand is always selected when the power is turned on. For the available Voices,

refer to the “Voice List” on page 19.

NOTE

• To hear and experience the characteristics of the Voices, listen to the Demo Songs for each Voice (page 20).

• You can change various settings such as sound effect, Touch Sensitivity, tuning, etc. in the Function Settings (page 34).

• Changing the Voice while pressing the keyboard may cause a sudden large change in the volume.

While playing the keyboard, adjust the volume level by rotating the [VOLUME]

control.

Rotating to the right increases the volume, while rotating to the left decreases it.

NOTE

The physical sound of the keyboard mechanism remains even when the Silent Piano™ function is active.

Press the Mode button several times

until the [VOICE] lamp lights up in

orange.

The currently selected Voice number is shown

on the display.

Use the [VOICE/VALUE] control or

one of Buttons 1 – 3 to select the

desired Voice.

The selected Voice can be confirmed by the

lamp and the display.

• [VOICE/VALUE] control

Rotating the control one by one switches the Voice to the next or previous one in the order of the Voice

List. Pressing this control instantly selects the CFX Grand (PF1) Voice.

• Button 1 [CFX]

Pressing this button selects the CFX Grand (PF1) Voice.

• Button 2 [Bösendorfer]

Pressing this button selects the Bösendorfer Imperial (PF2) Voice.

• Button 3 [Others]

Pressing this button selects the first Voice in each category (PF3, EP1, HS1, Or1, Pd1, Ly1) in order.

While the power is on, the Voice selected by Button 3 [Others] is retained. Pressing Button 3 [Others]

can calls up the last selected Voice instantly. When the power is turned off, the Voice for Button 3

resets to the Upright Piano (PF3) Voice.

Lights up in orange

Current Voice

number

The lamp of the selected button lights up in orange.

Press one of these buttons.

English

SH2 Owner’s Manual

Voi ce L ist

NOTE

For details on each Voice, refer to page 60.

 Reproducing a natural sound distance sensation (even when using

headphones)—Binaural Sampling and Stereophonic Optimizer

This instrument features two advanced technologies that allow you to enjoy exceptionally realistic, natural

sound, even though listening on headphones. These functions can be turned on or off as desired (page 40).

Binaural Sampling (CFX Grand Voice only)

Binaural Sampling is a method that uses two special microphones set at the ear position of a performer and

records the sound from a piano as it would actually be heard. Listening to the sound with this effect through

headphones gives the impression of being immersed in the sound, as if it was actually emanating from the

piano. When the CFX Grand Voice is selected, binaural sampled sound is produced.

Stereophonic Optimizer (Piano Voices other than CFX Grand)

Stereophonic Optimizer is an effect which reproduces the natural sound distance, like with the sound of

Binaural Sampling, even though you are listening to it on headphones. When one of the Piano Voices other

than CFX Grand (page 60) is selected, the Stereophonic Optimizer is enabled.

Button Display Voice Name Button Display Voice Name

1 Binaural CFX Grand 3 Celesta

CFX Grand

2 Bösendorfer Imperial Organ Principal

3 Upright Piano Organ Tutti

Pop Grand Jazz Organ

Ballad Grand Strings

Stage E.Piano Choir

DX E.Piano Synth Pad

Vintage E.Piano Piano + Strings

Harpsichord 8' Piano + Pad

Harpsichord 8'+4' Piano + DX E.Piano

Chapter

SH2 Owner’s Manual

Playing Back and Recording Songs

The preset songs, your recorded performances, and commercially available songs are referred to as “Songs” in

this manual. This instrument can play or record MIDI Songs and Audio Songs.

Available Song format

Playing back Songs

Songs that can be played (Song Category)

* The Song categories for USB flash drive are shown only when the USB flash drive is connected.

** The External Song categories are shown only when the data exist.

For information about the playback sequence of Song files in the USB flash drive, refer to page 64.

Songs Data formats Extension

MIDI

Songs

In a MIDI song, the information of your keyboard

performance (such as keystroke and velocity) is

recorded. This is not a recording of the actual sound.

Based on the performance information, the tone

generator outputs the sound.

A MIDI Song uses a small amount of data capacity in

comparison to an Audio song, and allows you to

easily change aspects of the sound, such as Voices

used, etc.

SMF format 0

Standard MIDI File format 0 for

playback and recording. MIDI songs

recorded with this unit are saved in

this format.

SMF format 1

Standard MIDI File format 1 for

playback only.

.MID

Audio

Songs

An Audio Song is a recording of the performed sound

itself.

This data is recorded in the same way as that used in

recording cassette tapes, or with voice recorders, etc.

This data can be played with a portable music player,

etc., allowing you to easily let other people hear your

performance.

WAV

Audio file format commonly used by

computers. This instrument can play

44.1kHz/16bit stereo WAV files. Audio

Songs recorded on this instrument

are saved in this format.

.WAV

Song Category Song Number Description

Voice Demo Song (MIDI) d.01 – d.20

Demo Songs which effectively demonstrates each

Voice (page 62) on this unit.

Preset Song (MIDI) P.01 – P.50

50 classical piano preset Songs (page 62) stored to

this unit. These Songs correspond to the score in the

music book “50 Classical Music Masterpieces,”

included with this unit.

USB flash

drive*

User Song

(Audio)

A.00 – A.99

Audio Songs which have been recorded with this unit

and saved to a USB flash drive (page 24).

External Song

(Audio)**

C.00 – C.99,

100 – 399

External Audio Songs, commercially available or which

have been recorded on a computer, etc. and saved to a

USB flash drive.

User Song

(MIDI)

S.00 – S.99

MIDI Songs which have been recorded with this unit

and saved to a USB flash drive (page 24).

External Song

(MIDI)**

F.00 – F.99,

100 – 399

External MIDI Songs, commercially available or which

have been recorded on a computer, etc. and saved to a

USB flash drive.

Internal

memory

User Song

(MIDI)

U.01 – U.10

MIDI Songs which have been recorded to internal

memory of this unit (page 24).

External Song

(MIDI)**

L.01 – L.99

External MIDI Songs (commercially available or which

have been recorded on a computer, etc.) transferred

from a computer to this unit.

English

SH2 Owner’s Manual

NOTE

• Songs recorded by this instrument are called “User Songs” while Songs created in other ways or on other devices are

called “External Songs.” When you record a Song to a USB flash drive, a “USER FILES” folder is created automatically and

the resulting User Song will be saved in this folder. Songs in the “USER FILES” folder are handled as User Songs while

Songs in a location other than the “USER FILES” folder are handled as External Songs.

• You can also play back the music software for Disklavier purchased from the “Yamaha MusicSoft” website. For further

information, refer to the following website:

Yamaha MusicSoft: http://www.yamahamusicsoft.com/

(Only when you play the Song in a USB flash drive)

Connect the USB flash drive to the USB [TO DEVICE] terminal at the front of the

control unit.

Before using the USB flash drive, be sure to read “Connecting USB devices” on page 45.

Press the Mode button several times

until the [SONG] lamp lights up in

orange.

Press Button 1 [Select] several times

to select the Song category (page 20).

NOTE

The category (L.) for External Songs in internal

memory cannot be selected by this operation above.

First, select the category (U.) for the User Songs in

the internal memory, then go on to step 4. It is shown between the Song “U.10” and “U.rd.”

Rotate the [VOICE/VALUE] control

to select the desired Song.

When you call up one of the following

displays, all Songs in the category are played

back continuously until you stop playback. When you call up others, the selected Song is played back

and playback stops automatically when the end of the Song is reached.

• *rd (Random Playback)................ Continuously plays back all Songs in the selected category in

random order.

• *AL (All-repeat Playback)............ Continuously plays back all Songs in the selected category in

number order.

The asterisk (*) indicates one of the Song categories. For example, selecting “P.rd” can play all Preset Songs in

random order.

NOTE

• Pressing the [VOICE/VALUE] control can select the first Song in the selected Song category.

• Continuous playback is not available for Demo Songs.

• When “U.rd” or “U.AL” is selected, External Songs in the internal memory are also played back as well as User

Songs.

Lights up in orange

SH2 Owner’s Manual

 Operations during playback

Playback continues even when you change the mode during playing the Song. Only when the instrument is in

the SONG mode, the following operations are available.

•Pause

During playback, press Button 3 [ / ] (Play/Pause) to pause playback. The display will also pause and the

[ /] (Play/Pause) lamp flashes will flash. Pressing the button again resumes Song playback from the

current position.

•Stop

During playback, press Button 1 [Select] to stop playback. When the end of the current Song is reached,

playback stops automatically.

When the Song is played back next time by pressing Button 3 [ /] (Play/Pause), it starts from the

beginning.

• Rewind/Fast forward

During playback or pausing, rotate the [VOICE/VALUE] control. Rotate the control to the left to rewind,

rotate it to the right to fast forward.

MIDI Songs are moved one measure back or forward, while Audio Songs are moved one second.

NOTE

Rewind and fast forward operations are not available for Demo Songs.

• Returning to the Song Top

During playback, press the [VOICE/VALUE] control to jump to the top of the Song.

NOTE

During playback of a Demo Song, this operation selects the Demo Song “d.01.”

Press Button 3 [ /] (Play/Pause) to start playback.

The [ /] (Play/Pause) lamp lights up and the current position (measure number or elapsed time) will

appear in the display.

The dot at the lower right of the display will flash at the MIDI Song tempo (or the metronome tempo

when playing back an Audio Song).

For operations during playback, see the next section.

NOTE

The current position is not displayed when playing back Demo Songs.

MIDI Song Audio Song

Current measure

number

Elapsed time

sec.

min. (In case of

10 minutes or more,

only the lowest digit

is shown).

Button 1 [Select] Button 3 [ /] (Play/Pause)

[VOICE/VALUE] control

English

SH2 Owner’s Manual

• Adjusting the Playback Tempo

You can change the tempo of MIDI Song or the speed of Audio Song during playback. It can

be adjusted in the same operation as the metronome tempo. For details, refer to page 32.

MIDI Songs: The tempo can be adjusted from 5 to 500 beats per minutes. It can also be

adjusted while the Song is paused. When the Song stops, it reset to the default setting.

Audio Songs: Compared to an original speed of 100%, it can be adjusted over the range of

75% – 125%. The setting value is maintained until another Song is selected.

NOTE

• For MIDI Songs having tempo changes in the middle of the Song, changing the tempo alters entire tempo relatively. For

example, in a Song that is set to a tempo of 100 at the start and changes midway during the Song to 120, changing the

starting tempo to 110 (10% faster) will result in a midway tempo of 132 (10% faster).

• When the MIDI Song tempo is changed, the metronome tempo is also changed to the same tempo. The Audio Song

speed does not affect the metronome tempo.

• While the Audio Song is paused and the metronome is played back, this operation changes only the metronome tempo

and the Audio Song speed is not changed.

Tem po

Speed (%)

SH2 Owner’s Manual

Recording your performance

You can record your performance on this instrument as a MIDI Song (SMF format 0) or an Audio Song (WAV

format). Up to 10 MIDI Songs can be saved (at 500KB/Song max.) to internal memory and up to 100 to a USB

flash drive. Up to 100 Audio Songs can be saved (at 80 minutes/Song max.) to a USB flash drive.

When the Song is recorded to a USB flash drive, a MIDI Song will be named “USERSONG**.MID” (**: 00 –99)

and an Audio Song will be named “AUDIOSONG**.WAV”, and saved to the “USER FILES” folder.

NOTE

You cannot start recording during Song playback. Make sure to stop playback beforehand.

(Only when you record a Song to a USB flash drive)

Connect a USB flash drive to the USB [TO DEVICE] terminal at the front of the

control unit.

Before using the USB flash drive, be sure to read “Connecting USB devices” on page 45.

Make necessary settings such as selecting a Voice (page 18).

Press the Mode button several times

until the [SONG] lamp lights up in

orange.

Press Button 1 [Select] to select the

recording format (Song category).

• For MIDI recording to internal memory.................. U. (U.01 – U.10)

• For MIDI recording to a USB flash drive ................. S. (S.00 – S.99)

• For Audio recording to a USB flash drive................. A. (A.00 – A.99)

Lights up in orange

English

SH2 Owner’s Manual

Rotate the [VOICE/VALUE] control

to select the Song number for

recording.

• When the selected Song contains already-recorded data:

You can confirm it by checking the display.

NOTICE

When the selected Song contains data, keep in mind that recording new data will erase the existing data.

If you want to play along with the metronome sound, turn the metronome on here.

NOTE

The metronome sound will not be recorded.

Press Button 2 [Rec] to put recording

in standby.

The [Rec] lamp lights in red, and the [ / ]

(Play/Pause) lamp flashes in orange.

NOTE

• To cancel recording standby status, press Button 2 [Rec] again.

• When an “EnP” or “FUL” message appears on the display, the memory capacity of the internal memory or the USB

flash drive is nearly full. We recommend that you first remove any unnecessary User Songs (page 28) to ensure

sufficient memory capacity. If “Enp” appears, you can start recording, but your performance data may not be

correctly saved or recording may stop automatically. If “FUL” appears, you cannot start recording.

Play the keyboard to start recording.

When you wish to record an empty section at the start of the Song, press Button 3 [ / ] (Play/Pause)

to start recording.

The [ /] lamp turns to be lit, and the current position (measure number or elapsed time) is shown on

the display while recording.

NOTICE

If “FUL” appears on the display while or after recording, it indicates the internal memory or USB flash drive

capacity becomes full and all or the part of the data will not be saved. We recommend that you first delete any

unnecessary User Songs (page 28) to ensure sufficient memory capacity.

NOTE

In case of Audio recording, the audio input from external device such as a computer or smart device (via the [AUX IN]

jack, USB [TO HOST] terminal, wireless LAN, or Bluetooth) can also be recorded. For connection with these devices,

refer to page 47.

When Song contains data: When Song does not contain data:

Three dots light up. Only the left-most dot lights up.

Measure number

Elapsed time (Min./Sec.)

Min.: Indicates minutes. In case of 10 minutes or more,

only the lowest digit is shown.

Sec.: Indicates seconds.

MIDI recording

Audio recording

SH2 Owner’s Manual

NOTICE

While dashes appear on the display in succession, never turn off the power. Doing so may corrupt the data or

damage the internal memory or USB flash drive.

NOTE

• If you stop recording without playing the keyboard, the selected Song data is deleted for MIDI recording, while a blank

(silent) Song is saved for Audio recording.

• The recorded User Song in the internal memory can be copied to a USB flash drive (page 27).

When your performance is finished,

press Button 2 [Rec] or Button 3

[ /] (Play/Pause) to stop

recording

Dashes appear on the display in succession,

indicating that the recorded data is being

saved. After the data is saved, an “End” message appears, and the recorded Song number will appear.

Pressing Button 3 [ /] (Play/Pause) plays back the recorded Song.

English

SH2 Owner’s Manual

Handling User Song files

You can copy the User Song saved in the internal memory to a USB flash drive. Also, you can delete the User

Songs in the internal memory or a USB flash drive.

NOTE

• Before using the USB flash drive, be sure to read “Connecting USB devices” on page 45.

• While a Song is being recorded, played back or paused, you cannot start these operations. Make sure to stop the Song

beforehand.

 Copying User Songs in the internal memory to a USB flash drive

You can copy the User Song in the internal memory to the connected USB flash drive. We recommend to copy

your important Song to the USB flash drive. The copied Song is saved as SMF format 0 to the “USER FILES”

folder in the USB flash drive, and the file is automatically named as “USERSONG**.MID” (**: numerals).

NOTE

Demo Songs and Preset Songs cannot be copied.

Connect a USB flash drive to the USB [TO DEVICE] terminal at the front of the

control unit.

Press the Mode button several times

until the [SONG] lamp lights up in

orange.

Press Button 1 [Select] to select the

Song category “U.” (User Song).

Rotate the [VOICE/VALUE] control

to select the Song number (U.01 –

U.10) to copy.

Press the Mode button several times

until the [UTILITY] lamp lights up

in orange.

Press Button 3 [Func.] to enter the

Function Settings.

Lights up in orange

SH2 Owner’s Manual

NOTICE

While dashes appear on the display in succession, never turn off the power. Doing so may corrupt the data or

damage the internal memory or USB flash drive.

 Deleting User Songs

You can delete the User Songs saved in the internal memory or the USB flash drive.

NOTE

The Songs other than the User Songs cannot be deleted.

Rotate the [VOICE/VALUE] control

to select “F7.1.”

Press Button 3 [Func.] to call up

“SAv” in the display.

The smallest MIDI Song number which has no

data in the USB flash drive is automatically

selected as the copy destination and the

number is shown in the display.

NOTE

• To cancel the copying operation, press any button other than Button 3 while the Song number is shown.

• If there is no empty MIDI Song number in the USB flash drive, “FUL” appears on the display and the copying

operation cannot be completed. Delete any unnecessary User Songs (page 28), then execute the copy operation

again.

Press Button 3 [Func.] again to start

copying.

Dashes appears in succession on the display,

indicating that the copy operation is in

progress. When the operation is completed,

“End” appears on the display.

Connect a USB flash drive to the USB [TO DEVICE] terminal at the front of the

control unit.

Press the Mode button several times

until the [SONG] lamp lights up in

orange.

English

SH2 Owner’s Manual

NOTICE

While dashes appear on the display in succession, never turn off the power. Doing so may corrupt the data or

damage the internal memory or USB flash drive.

Press Button 1 [Select] to select the

category of the Song to be deleted.

• U. (U.01 – U.10).................User Songs in internal memory (MIDI)

• S. (S.00 – S.99) ...................User Songs in a USB flash drive (MIDI)

• A. (A.00 – A.99).................User Songs in a USB flash drive (Audio)

Rotate the [VOICE/VALUE] control

to select the Song number to delete.

Press the Mode button several times

until the [UTILITY] lamp lights up

in orange.

Press Button 3 [Func.] to enter the

Function Settings.

Rotate the [VOICE/VALUE] control

to select “F7.2.”

Press Button 3 [Func.] to call up

“dEL” in the display.

After that, “n y” appears on the display.

NOTE

To cancel the copying operation, press any button

other than Button 3 [Func.] while “n y” is shown.

Press Button 3 [Func.] again to start

deleting.

Dashes appears in succession on the display,

indicating that the delete operation is in

progress. When the operation is completed,

“End” appears on the display.

Chapter

SH2 Owner’s Manual

4 Using Convenient Functions

(UTILITY)

This section include the operations in the UTILITY mode. The UTILITY mode allows you to apply the Reverb

effect, use the metronome, and use other various convenient functions.

Enhancing the sound with Reverb

An actual piano sounds differently depending on the size of the room, or the material of the building in which

it is played. The reverberation is the major reason for this difference. Using the Reverb effect and simulating

the reverberation in a concert hall, etc. gives you the feeling of the being at a live performance.

Although selecting a Voice will call up the optimum Reverb type and depth for the selected Voice, you can

change these settings as desired.

Press the Mode button several times

until the [UTILITY] lamp lights up

in orange.

Press Button 2 [Reverb].

The current Reverb depth appears on the

display.

Make the desired settings as follows.

• Adjusting the Reverb depth

Rotate the [VOICE/VALUE] control to

adjust the depth in the range of 1 – 20.

Pressing the [VOICE/VALUE] control can

restore the default setting of the selected

Voic e.

• Turning off the Reverb

While the Reverb depth is shown in the

display, press Button 2 [Reverb]. “OFF”

appears on the display and the Reverb effect

for the keyboard performance is turned off.

NOTE

You can also turn off the Reverb effect by setting the Reverb type to “OFF” (page 31). In this case, Reverb is not

applied to Song playback, nor to the keyboard performance.

Lights up in orange

English

SH2 Owner’s Manual

Reverb Type List

NOTE

• The Reverb settings are reset to the default values automatically when the power is turned off.

• When an external Song (page 20) is played back, or when the MIDI data is received (from a computer, etc.; page 50),

dashes may appear on the display. This indicates that the data uses a Reverb type which is not available on this unit.

• Selecting a Reverb type

3-1 Hold down Button 2 [Reverb] for three

seconds to show the current Reverb type

on the display.

3-2 Rotate the [VOICE/VALUE] control to

select a Reverb type. Pressing the

[VOICE/VALUE] control can restore the default setting of the selected Voice.

For the list of the available types, refer to “Reverb Type List” bellow.

3-3 Press Button 2 [Reverb] again or wait for a while without performing any operation to return to the

Reverb depth display.

Reverb Type Description

Off No effect is applied.

Recital Hall Simulates clear reverberation in a mid-sized hall suitable for piano recital.

Concert Hall Simulates brilliant reverberation in a large hall for public orchestra performances.

Chamber Simulates the elegant reverberation in a small room suitable for chamber music.

Cathedral Simulates the solemn reverberation in a high-ceiling stone-made cathedral.

Club Simulates the lively reverberation in a jazz club or a small bar.

Plate Simulates the bright sound of vintage reverb equipment used in recording studios.

Hold down for three seconds.

SH2 Owner’s Manual

Using the metronome

The unit features a built-in metronome that helps you to practice and play with accurate tempo.

NOTE

• When a MIDI Song (page 20) is played back, the metronome plays according to the Song tempo and time signature.

• The metronome tempo and beat restore to the default settings when the power is turned off.

• The metronome volume can be adjusted via Button 3 [Func.] in the UTILITY mode (page 38).

 Turning on/off the metronome

 Adjusting the Tempo

Press the Mode button several times

until the [UTILITY] lamp lights up

in orange.

Press Button 1 [Metronome] to turn

on the metronome.

The current tempo appears on the display.

While the metronome sounds, a dot at the

lower right of the display flashes at the current

tempo. Even when another Mode is selected,

the dot keeps flashing while the metronome is playing.

NOTE

When Button 2 [Reverb] or 3 [Func.] is selected in the UTILITY mode, you need to press Button 1 [Metronome] to

switch the function before operating step 2 above.

To stop the metronome, press Button 1 [Metronome] once again.

Press Button 1 [Metronome] in the UTILITY mode to call up the current tempo on

the display.

Rotate the [VOICE/VALUE] control

to adjust the tempo.

The metronome tempo can be set from 5 to

500 beats per minute. Pressing the [VOICE/

VALUE] control restores the default setting (120).

NOTE

When an Audio Song is being played back, this operation changes the playback speed (page 23). The metronome

tempo does not change.

Lights up in orange

English

SH2 Owner’s Manual

 Selecting the time signature (Beat)

Press Button 1 [Metronome] in the UTILITY mode.

Hold down Button 1 [Metronome]

for three seconds to call up the beat

setting value on the display.

Rotate the [VOICE/VALUE] control

to select the beat.

The beat can be selected from 0 and 2 – 6. For

values other than 0, the first beat is accented

with a bell sound to signal the start of a

measure.

Pressing the [VOICE/VALUE] control can restore the default setting (0; no 1st beat accent).

Pressing Button 1 [Metronome] displays the tempo value.

NOTE

One beat is equal to a quarter note on this unit. When playing a song written in non- quarter-note units, change the

setting accordingly (for example, when playing a song in 3/2 time, set Beat to 6).

Hold down for three seconds.

SH2 Owner’s Manual

Customizing with the various Function parameters

(Function settings)

In the Function settings, you can tune the instrument, adjust the metronome volume, and make a wide range of

other convenient settings to customize your piano to suit your performance.

 Function List

Function parameter values indicated by “*” are maintained even when the power is turned off.

Function Function No. Page

Brilliance* F1.1 page 36

Touch Touch Sensitivity* F2.1 page 36

Fixed Velocity F2.2 page 36

Keyboard Transpose F3.1 page 36

Master Tune* F3.2 page 37

Scale Tune Scale Type (Temperament) F3.3 page 37

Base Note F3.4 page 38

Metronome Volume* F4.1 page 38

Song MIDI Song/Keyboard Volume Balance* F4.2 page 38

MIDI Song Transpose F4.3 page 39

Audio Song Volume* F4.4 page 39

Sound Half Pedal Point* F5.1 page 39

Binaural On/Off* F5.2 page 40

VRM On/Off* F5.3 page 40

Damper Resonance Depth F5.4 page 41

String Resonance Depth F5.5 page 41

Aliquot Resonance Depth F5.6 page 41

Body Resonance Depth F5.7 page 42

Key-off Sample Volume F5.8 page 42

MIDI MIDI Transmit Channel* F6.1 page 42

Local Control On/Off F6.2 page 42

File Control Copying User Songs F7.1 page 43

Deleting User Songs F7.2 page 43

Formatting a USB flash drive F7.3 page 43

Auto Power Off F8.1 page 43

AUX IN Noise Gate* F8.2 page 43

Version F8.3 page 44

Audio Loop Back* F8.4 page 44

Bluetooth Bluetooth On/Off* F8.5 page 44

Pairing* F8.6 page 44

English

SH2 Owner’s Manual

 Basic Function-parameter operations

To exit from the Function Settings, select another mode.

Press the Mode button several times

until the [UTILITY] lamp lights up

in orange.

Press Button 3 [Func.] to enter the

Function Settings.

Rotate the [VOICE/VALUE] control

to select the desired Function

number.

Press Button 3 [Func.] to display the

parameter value.

Rotate the [VOICE/VALUE] control

to change the parameter value.

To continue to set other Functions, repeat the

operation from step 2 above.

Lights up in orange

SH2 Owner’s Manual

 Brilliance

Adjusts the timbre brilliance of the entire keyboard sound from mellow to bright.

 Touch S en sitiv ity

Determines how the sound responds to your playing strength.

NOTE

When “OFF” (Fixed) is selected, the velocity can be set in F2.2 (Fixed Velocity).

 Fixed Velocity

Determines the velocity with which the sound responds when Touch Sensitivity is set to “OFF” (Fixed).

 Keyboard Transpose

Shifts the pitch of the entire keyboard up or down in semitone intervals to facilitate playing in difficult key

signatures, and to let you easily match the pitch of the keyboard to the range of a singer or other instruments.

For example, if you set this parameter to “5,” playing key C produces pitch F. In this way, you can play the F

major song as if it were in C major.

Setting range

-2 (Mellow) – 0 (Normal) – +2 (Bright)

Default setting

0 (Normal)

Setting range

-2 (Soft) Produces relatively high volume even with light playing strength.

-1 (Soft/Medium) Produces high volume with moderate playing strength.

0 (Medium) Standard Touch Sensitivity.

1 (Medium/Hard) Requires moderately strong playing for high volume.

2 (Hard) Requires strong playing to produce high volume.

OFF (Fixed) No touch response. The volume level will be the same regardless of

how hard you play the keys.

Default setting

0 (Medium)

Setting range

1 – 127

Default setting

Setting range

-12 – 0 – +12

Default setting

English

SH2 Owner’s Manual

NOTE

Your keyboard performance data will be transmitted with the transposed note numbers while MIDI note numbers received from

an external MIDI device or computer will not be affected by the Transpose setting.

 Master Tune

Fine tunes the pitch of the entire instrument in 0.2 Hz steps. This lets you accurately match the keyboard pitch

to that of other instruments or music on a portable music player.

NOTE

The hundreds digit is omitted for the value shown in the display (e.g., “40.2” stands for 440.2 Hz).

 Scale Type (Temperament)

Modern acoustic pianos are tuned almost exclusively in equal temperaments. Likewise, this unit employs equal

temperament, but you can select one of various scales for playing in custom tunings for specific historical

periods or music genres.

Setting range

A3 = 414.8 Hz – 466.8 Hz

Default setting

A3 = 440.0 Hz

Setting range

1 (Equal) The pitch range of each octave is divided equally into twelve parts,

with each half-step evenly spaced in pitch. This is the most commonly

used tuning in music today.

2 (Pure Major) These tunings preserve the pure mathematical intervals of each scale,

especially for triad chords (root, third, fifth). You can hear this best in

actual vocal harmonies — such as choirs and a cappella singing.

3 (Pure Minor)

4 (Pythagorean) This scale was devised by the famous Greek philosopher and is

created from a series of perfect fifths, which are collapsed into a single

octave. The 3rd in this tuning are slightly unstable, but the 4th and 5th

are beautiful and suitable for some leads.

5 (Mean-Tone) This scale was created as an improvement on the Pythagorean scale,

by making the major third interval more “in tune.” It was especially

popular from the 16th century to the 18th century. Handel, among

others, used this scale.

6 (Werckmeister)

This composite scale combines the Werckmeister and Kirnberger

systems, which were themselves improvements on the mean-tone and

Pythagorean scales. The main feature of this scale is that each key

has its own unique character. The scale was used extensively during

the time of Bach and Beethoven, and even now it is often used when

performing period music on the harpsichord.

7 (Kirnberger)

Default setting

1 (Equal)

SH2 Owner’s Manual

 Base Note

Determines the base note for the Scale selected above. When the base note is changed, the pitch of the

keyboard is transposed, yet maintains the original pitch relationship between the notes. This setting is

necessary when Scale Tune is set to something other than “Equal Temperament.”

NOTE

In the display, the note is followed by a high bar if sharp, and the note is followed by a low bar if flat.

 Metronome Volume

Adjusts the metronome volume.

 MIDI Song/Keyboard Volume Balance

Adjusts the volume balance between the keyboard performance and the MIDI Song playback. The higher the

value, the Song playback volume decreases, the lower the value, the keyboard performance volume decreases.

To adjust the balance with Audio Song, adjust the Audio Song volume in F4.4 (page 39).

NOTE

Some PianoSoft Songs have their own volume balance settings. These settings take priority to the balance setting here.

Setting range

C, C#, D, Eb, E, F, F#, G, Ab, A, Bb, B

Default setting

Setting range

1 – 20

Default setting

Setting range

-64 – 0 – +64

Default setting

English

SH2 Owner’s Manual

 Song Transpose

Shifts the pitch of the MIDI Song or Audio Song up or down in semitone intervals. For example, if you set this

parameter to “5,” the note of key C is played back in pitch F. In this way, the F major song is played back as if it

were in C major.

NOTE

• MIDI note numbers received from an external MIDI device or computer will not be affected by the Transpose setting.

• Applying transpose to an Audio Song may change its tonal characteristics.

 Audio Song Volume

Adjusts the volume of Audio Song playback.

 Half Pedal Point

You can sets the degree to which pressing the damper pedal applies the half-pedal effect. The larger the value,

the wider the half-pedal range. Larger values give you greater leeway in controlling the half-pedal effect.

Setting range

-12 – 0 – +12

Default setting

Setting range

1 – 20

Default setting

Setting range

-2 – 0 – +4

Default setting

Half-pedal function

This function allows the sustain length to vary depending on how far the pedal is pressed. The farther you

press the pedal, the more the sound sustains. For example, if you press the damper pedal and all notes you

are playing sound a bit murky and loud with too much sustain, you can release the pedal half way to

subdue the sustain (murkiness).

SH2 Owner’s Manual

 Binaural On/Off

Turns the Binaural function on or off. When this function is on, the sound from this instrument changes to the

sound of Binaural Sampling or the sound enhanced with the Stereophonic Optimizer (page 19), allowing you

to enjoy more realistic sound even when listening with headphones.

 VRM On/Off

Turns the VRM effect (see below) on/off. When set to on, the VRM effect is applied only to piano Voices (PF.1

– PF.5). Damper Resonance, String Resonance and Aliquot Resonance produced by VRM can be adjusted

separately in F5.4 – F5.7.

Setting range

On, OFF

Default setting

Since the sound of Binaural Sampling and the sound enhanced with the Stereophonic Optimizer are

optimized for listening with headphones, we recommend that you set this function to “OFF” in the

following situation.

You should turn these functions off when:

• Playing the sound of this instrument with an external powered speaker system or a mixer, while

monitoring the sound output from this instrument on connected headphones.

• Making an Audio Recording (page 24) and then playing the recorded Audio Song through speakers. (If

you want to play the Audio Song recorded on this instrument through speakers, make sure to turn these

functions off before using Audio Recording.)

NOTE

Before connecting an external audio device, be sure to read “Connecting to external audio devices” (page 47).

Setting range

On, OFF

Default setting

VRM (Virtual Resonance Modeling) technology

On an actual acoustic piano, if you press the damper pedal and play a key, not only does the string of the

pressed key vibrate, it also causes other strings and the soundboard to vibrate, with each influencing the

rest, creating a rich and brilliant resonance that sustains and spreads. The VRM (Virtual Resonance

Modeling) technology featured in this unit reproduces the complicated interaction of both string and

soundboard resonance faithfully using a virtual musical instrument (physical modeling), and makes the

sound more like a real acoustic piano. Since instantaneous resonance is made at the moment according to

the state of the keyboard or pedal, you can vary the sound expressively by changing the timing of your

pressing the keys, and the timing and depth of your pressing the pedal.

English

SH2 Owner’s Manual

 Damper Resonance Depth

Determines the depth of the resonance effect produced by VRM which is applied when the damper pedal is

pressed. This parameter is effective only when VRM is on (page 40) and one of the piano Voice is selected.

 String Resonance Depth

Determines the depth of the string resonance effect produced by VRM which is applied when a note on the

keyboard is pressed. This parameter is effective only when VRM is on (page 40) and one of the piano Voice is

selected.

 Aliquot Resonance Depth

Determines the depth of the Aliquot resonance effect produced by VRM which is applied when you release

your hands from the keyboard. This parameter is effective only when VRM is on (page 40) and one of the

piano Voice is selected.

Setting range

0 – 10

Default setting

Setting range

0 – 10

Default setting

Setting range

0 – 10

Default setting

What is Aliquot?

Aliquot is a stringing method for pianos that uses extra, un-struck strings in the upper octaves to enhance

the tone. These strings sympathetically vibrate with other strings in an acoustic piano, resonating with

overtones, and adding richness, brilliance and complex color to the sound. Since they do not have a

damper, they will continue sounding even after you release your hands from the keyboard.

SH2 Owner’s Manual

 Body Resonance Depth

Determines the depth of the Body resonance effect which simulates the resonance of the piano itself, i.e.

soundboard, the sides, the frame and so on. This parameter is effective only when VRM is on (page 40) and

one of the piano Voice is selected.

 Key-off Sampling Volume

Determines the volume of the key-off sampling sound (simulated the subtle sound that occurs when you

release a key) which is available for some Voices. For Voices to which this effect is applied, refer to the Voice

List (page 60).

 MIDI Transmit Channel

Determines the MIDI channel with which the MIDI data of the keyboard performance will be transmitted to

the external MIDI devices. When this parameter is set to “OFF,” MIDI data is not transmitted.

 Local Control

Determines whether the sound played on the keyboard is produced from the tone generator of this instrument

or not.

Setting range

0 – 10

Default setting

Setting range

0 – 10

Default setting

Setting range

1 – 16, OFF

Default setting

Setting range

On The keyboard performance data is transmitted to the internal tone

generator of this instrument and it produces the sound.

OFF The keyboard performance data is not transmitted to the internal tone

generator of this instrument. This means that even if you play the

keyboard, this instrument will produce no sound. Instead, the keyboard

data can be transmitted via MIDI to a connected external MIDI device,

which can produce the sound.

Default setting

English

SH2 Owner’s Manual

 Copying User Songs

Copies the User Songs saved in the internal memory to the connected USB flash drive. For details, refer to

“Copying User Songs in the internal memory to a USB flash drive” on page 27.

 Deleting User Songs

Delete the User Songs in the internal memory or the connected USB flash drive. For details, refer to “Deleting

User Songs” on page 28.

 Formatting a USB Flash Drive

Formats or initialize the USB flash drive connected to the USB [TO DEVICE] terminal. For details, refer to

“Formatting a USB flash drive” on page 46.

NOTICE

Executing the Format operation will delete all data saved in the USB flash drive. Save important data to a computer

or another storage device.

 Auto Power Off

Disables or enables the Auto Power Off function (page 16).

NOTICE

When the instrument is communicating with other devices or the Songs are played back, the power will not be

turned off automatically. Make sure to turn off the power by pressing the [ ] (Standby/On) switch when the

instrument is not in use.

 AUX IN Noise Gate

The AUX IN Noise Gate function conveniently cuts unwanted noise from the sound input via the [AUX IN]

jack. By default, this is set to on, however, this may result in necessary sounds also being cut, such as the soft

decay sound of a piano. To avoid this, set this function to off.

Setting range

On Enables the Auto Power Off function. The power is automatically

turned off if the instrument is not operated for approximately

30 minutes.

OFF Disables the Auto Power Off function. Turn off the power by pressing

the [ ] (Standby/On) switch.

Default setting

Setting range

On, OFF

Default setting

SH2 Owner’s Manual

 Versi on

The firmware version of this unit is shown in the display.

Example: version 1.00

 Audio Loop Back

Determines whether audio sound input from the connected computer or smart device (via the USB Audio

Interface function, wireless connection or Bluetooth Audio function; page 50) is output to a computer or a

smart device or not, along with the performance played on the instrument. To output the audio input sound,

set Audio Loop Back to “On.”

For example, if you want to record the audio input sound as well as the sound played on the instrument to a

computer or the smart device, set this to “On.” If you intend to record only the sound played on the instrument

to a computer or smart device, set this to “OFF.”

NOTICE

If you are using a DAW (digital audio workstation) application with this instrument, set the Audio Loop Back to off.

Otherwise, a loud sound may occur, depending on the settings of the computer or the application software.

NOTE

• The playback sound of an Audio Song on this instrument is also output to a computer or smart device when this is set to

“On,” while the sound is not output when this is set to “OFF.”

• With Audio Recording on this instrument, the audio input sound from the connected computer or smart device is recorded

when this is set to “On,” while the sound is not recorded when this is set to “OFF.”

 Bluetooth On/Off

Turns on or off the Bluetooth function. For details, refer to “Turning the Bluetooth function on/off ” on

page 53.

 Pairing

Button 3 [Func.] to enable the Pairing mode on the instrument. After that, make settings on the Bluetooth

equipped-device. For detailed instructions, refer to step 3 in “Pairing with Bluetooth-equipped devices” on

page 52.

Setting range

On, OFF

Default setting

Chapter

English

SH2 Owner’s Manual

5 Connecting to Other Devices

CAUTION

Before connecting the instrument to other electronic components, turn off the power to all the components. Also,

before turning any components on or off, set all volume levels to minimum (0). Otherwise, damage to the

components, electrical shock, or even permanent hearing loss may occur.

Connecting USB devices

You can connect a USB flash drive or a USB wireless LAN adaptor (sold separately) to the USB [TO DEVICE]

terminal. You can record your performance to the USB flash drive (page 24), or you can connect the

instrument to a smart device via wireless LAN (page 51).

Precautions when using the USB [TO

DEVICE] terminal

This instrument features a built-in USB [TO DEVICE]

terminal. When connecting a USB device to the

terminal, be sure to handle the USB device with care.

Follow the important precautions below.

NOTE

For more information about the handling of USB devices, refer to

the owner’s manual of the USB device.

 Compatible USB devices

•USB flash drive

•USB hub

• USB wireless LAN adaptor (UD-WL01; may not be

available depending on your area)

Other USB devices such as a USB hub, computer

keyboard or mouse cannot be used.

The instrument does not necessarily support all

commercially available USB devices. Yamaha cannot

guarantee operation of USB devices that you purchase.

Before purchasing a USB device for use with this

instrument, please visit the following web page:

http://download.yamaha.com/

Although USB devices 2.0 to 3.0 can be used on this

instrument, the amount of time for saving to or loading

from the USB device may differ depending on the type

of data or the status of the instrument. USB 1.1 devices

cannot be used on this instrument.

NOTICE

The rating of the USB [TO DEVICE] terminal is a maximum

of 5V/500mA. Do not connect USB devices having a rating

above this, since this can cause damage to the instrument

itself.

 Connecting a USB device

When connecting a USB

device to the USB [TO

DEVICE] terminal, make

sure that the connector on

the device is appropriate

and that it is connected in

the proper direction.

NOTICE

• Avoid connecting or disconnecting the USB device

during playback/recording, or when accessing the USB

device. Failure to observe this may result in “freezing” of

the operation of the instrument or corruption of the USB

device and the data.

• When connecting then disconnecting the USB device

(and vice versa), make sure to wait a few seconds

between the two operations.

NOTE

• If you intend to connect two or three devices at the same time

to a terminal, you should use a bus-powered USB hub. Only

one USB hub can be used. If an error message appears while

using the USB hub, disconnect the hub from the instrument,

then turn on the power of the instrument and re-connect the

USB hub.

• Do not use an extension cable when connecting a USB device.

Using USB Flash Drives

By connecting the instrument to a USB flash drive, you

can save data you’ve recorded to the connected device,

as well as read data from the connected USB flash drive.

 Number of USB flash drives that can be used

Only one USB flash drive can be connected to the USB

[TO DEVICE] terminal. (If necessary, use a USB hub.

The number of USB flash drives that can be used

simultaneously with musical instruments even when a

USB hub is used is only one.)

 Formatting a USB flash drive

You should format the USB flash drive only with this

instrument (page 46). A USB flash drive formatted on

another device may not operate properly.

NOTICE

The format operation overwrites any previously existing

data. Make sure that the USB flash drive you are formatting

does not contain important data.

 To protect your data (write-protect)

To prevent important data from being inadvertently

erased, apply the write-protect provided with each USB

flash drive. If you are saving data to the USB flash

drive, make sure to disable write-protect.

 Turning off the instrument

When turning off the instrument, make sure that the

instrument is NOT accessing the USB flash drive by

playback/recording. Failure to do so may corrupt the

USB flash drive and the data.

SH2 Owner’s Manual

 Formatting a USB flash drive

Formats or initialize the USB flash drive connected to this instrument. When a “UnF” appear on the display,

indicating that the USB flash drive has not been formatted, format the drive.

NOTICE

Executing the Format operation will delete all data saved in the USB flash drive. Save important data to a computer

or another storage device.

NOTICE

While dashes appear in succession on the display, never turn off the power or disconnect the USB flash drive. Doing

so may corrupt the data on the USB flash drive, and the Format operation will not be executed properly.

Connect the USB flash drive to the USB [TO DEVICE] terminal.

Press the Mode button several times

until the [UTILITY] lamp lights up

in orange.

Press Button 3 [Func.] to enter the

Function Settings.

Rotate the [VOICE/VALUE] control

to select the function number “F7.3.”

Press Button 3 [Func.] to call up

“For” (Format) in the display.

“n y” will appear subsequently.

NOTE

While “n y” is shown in the display, you can cancel

the Format operation by pressing a button other than

Button 3 [Func.].

When “n y” appears, press Button 3

[Func.] to execute the Format

operation.

Dashes appear in succession on the display,

indicating that Formatting is in progress.

When the operation is completed, “End”

appears on the display

Lights up in orange

English

SH2 Owner’s Manual

Connecting to external audio devices

By connecting the AUX OUT jacks or the [AUX IN] jack to other audio devices, the keyboard performance on

this instrument can be output to the external device, or the audio sound played on the external device can be

input to this instrument.

NOTE

Use audio cables and adaptor plugs having no (zero) resistance.

 Connecting to the AUX OUT [R]/[L/L+R] jacks

The AUX OUT [R]/[L/L+R] jacks are the standard phone jacks.

When connected to an audio recorder (such as a mini stereo system or IC recorder):

You can record performances played using the Silent Piano™ function.

When connected to powered speakers or a stereo system:

You can listen to performances played using the Silent Piano™ function on the speaker. The signal output from

this jack is the same sound as that heard when listening through headphones.

NOTICE

To avoid damage to the devices, first turn on the power to the instrument, then to the external device. When turning

off the power, first turn off the power to the external device, then to the instrument.

NOTE

• You can use the [VOLUME] control on this unit to adjust the output volume from the AUX OUT jacks.

• Use only the AUX OUT [L/L+R] jack for connection with a mono device.

• We recommend that you turn the Binaural (or Stereophonic Optimizer) function off when you monitor the sound output from

this instrument on connected headphones (pages 19 and 40).

Control unit bottom panel

AUX OUT

Stereo phone plug

(standard)

Audio cable

Audio recorder (mini stereo

system, IC recorder, etc.)

Powered speakers

Stereo system

Audio signal

SH2 Owner’s Manual

 Example of using the [AUX IN] jack

The [AUX IN] jack is a stereo mini jack.

By connecting the [AUX IN] jack to other sound modules or playback devices (such as portable music players),

you can use the Silent Piano™ function together with the sound received from the connected devices.

You can use the [VOLUME] control on this unit to simultaneously adjust the volume of its electronic sound

and the sound received through its [AUX IN] jack. To set a proper balance of the levels, adjust the output

volume on the connected device.

NOTICE

Do not route the output from the AUX OUT jacks to the AUX IN jack. If you make this connection, the signal input at

the [AUX IN] jack is output from the AUX OUT jacks. These connections could result in a feedback loop that will

make normal performance impossible, and may even damage the equipment.

NOTE

By default, this instrument uses a convenient Noise Gate effect to cut unwanted noise from the sound input via the [AUX IN]

jack. However, this may result in necessary sounds also being cut, such as the soft decay sound of a piano. To avoid this, set

the Noise Gate to off (page 43).

Control unit bottom panel

[AUX IN]

stereo mini jack

Audio cable

Other sound modules

Portable music player, etc.

Audio signal

English

SH2 Owner’s Manual

Connecting to external MIDI devices

By connecting a MIDI device, you can control the external MIDI device from this unit or vice versa. Use the

MIDI terminals and standard MIDI cables to connect external MIDI devices (keyboard, synthesizer,

sequencer, etc.).

NOTE

• Demo Song data and Preset Song data cannot be transmitted.

• Since MIDI data that can be transmitted or received varies depending on the type of MIDI device, check the “MIDI

Reference” on the website to find out what MIDI data and commands your devices can transmit or receive.

 Connecting to the MIDI [OUT] jack

When connected to another MIDI device:

You can reproduce the Silent Piano™ performances using sound modules such as synthesizers and other MIDI

devices.

 Connecting to the MIDI [IN] jack

When connected to a sequencer:

You can use the sound module of this unit to reproduce performance data received from connected devices.

Control unit bottom panel

MIDI [OUT]

Other MIDI device

MIDI cable

Performance data

Control unit bottom panel

MIDI [IN]

Sequencer

MIDI cable

Performance data

SH2 Owner’s Manual

Connecting to a computer/smart device

Connecting this instrument to a computer or a smart device expands the possibility.

Connection example

For details on connecting to a computer or transferring the MIDI Song to the computer, refer to the

“Computer-related Operations” on the website (page 10).

NOTICE

• Do not connect this product to public Wi-Fi and/or Internet directly. Only connect this product to the Internet

through a router with strong password-protections. Consult your router manufacturer for information on security

best practices.

• Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used.

• If you are using a DAW (digital audio workstation) application with this instrument, set the Audio Loop Back

(page 44) to off. Otherwise, a loud sound may occur, depending on the settings of the computer or the application

software.

• Do not place your computer or smart device in an unstable position. Doing so may cause the device to fall and

result in damage.

NOTE

• When using a USB cable to connect the instrument to your computer or smart device, make the connection directly without

passing through a USB hub.

• For information on setting up your sequence software, refer to the owner’s manual of the relevant software.

• When transmitting or receiving audio signals by using the computer operated by Windows, the Yamaha Steinberg USB

Driver should be installed to the computer. For details, refer to the “Computer-related Operations” on the website.

• Before using the USB [TO DEVICE] terminal, be sure to read “Connecting USB devices” on page 45.

• When you use the instrument along with an application on your smart device, we recommend that you set your device to

not emit radio waves (for example, by setting “Airplane Mode” to on).

• The instrument will begin transmission a short time after the computer or smart device is connected.

What you can do by connecting to a computer/smart device:

• Transmitting and receiving audio data (USB Audio Interface function, page 51)

• Using a smart device app (page 51)

• Listening to the audio data in the smart device through this instrument (Bluetooth Audio function,

page 52)

• Transmitting and receiving MIDI data

• Saving the Song recorded on this instrument to the computer

NOTE

For details on transmitting/receiving MIDI data or saving the Song to a computer, refer to the “Computer-related

Operations” on the website.

USB [TO DEVICE]

terminal

Computer

USB cable

USB terminal

USB [TO HOST]

terminal

USB wireless

LAN adaptor

Wireless LAN

Smart device

English

SH2 Owner’s Manual

 Transmitting/receiving audio data (USB Audio Interface function)

By connecting a computer or a smart device to the USB [TO HOST] terminal via a USB cable, digital audio

data can be transmitted/received, giving you the following advantages:

• Playing back audio data with high sound quality

This gives you direct, clear sound in which the sound quality has less noise and deterioration than that

from the [AUX IN] jack.

• Recording performance on the instrument as audio data by using a recording

software or a music production software

The recorded audio data can be played back on the computer or smart device.

NOTE

• The volume of the audio sound input can be adjusted from a computer or smart device.

• You can set whether audio sound input from the connected computer or smart device is output to a computer or smart

device or not, along with the performance played on the instrument. For details, refer to “Audio Loop Back” on page 44.

 Using a smart device app

By using the compatible smart device app, you can take advantage of convenient functions and get more

enjoyment out of this instrument. Especially, “Smart Pianist” (available as a free download) enables you to

conveniently control the various functions of this instrument from the smart device. For information about the

compatible apps and smart devices, access the web page of the respective apps on the following page:

http://www.yamaha.com/kbdapps/

This section explains how to connect a smart device by using the separately sold USB wireless LAN adaptor

UD-WL01. For connections with other methods, refer to the “iPhone/iPad Connection Manual” on the

website.

Connection with the USB wireless LAN adaptor (UD-WL01*)

*UD-WL01 (sold separately) may not be available depending on your area.

There are two types of connections with the USB wireless LAN adaptor (UD-WL01) described below.

• Connecting by the Access Point mode

The Access Point mode allows you to directly connect the

USB wireless LAN adaptor and a smart device, without

the need for using an access point. You can use this mode

when there is not any access point available for connection

to the instrument, or when it is unnecessary to connect to

another network while a smart device is connected to the

instrument.

Access point

An “access point” refers to a device which acts as a base

station when data is transmitted/received via a USB

wireless LAN adaptor. Some access points are combined

with router or modem functions.

NOTE

When you change the Infrastructure mode (see the right

column) to the Access Point mode, initialize the instrument

(page 54).

• Connecting by the Infrastructure mode

(automatic setup by WPS)

The Infrastructure mode uses an access point for data

communication between a USB wireless LAN adaptor and

a network. You can use this mode when you connect to

another network while a smart device is connected to the

instrument.

NOTE

Once you connect by the Infrastructure mode, you can

connect to a network automatically without executing steps

2 and 3.

Initialize the instrument

(if necessary; see page 54).

Connect the UD-WL01 to the USB [TO

DEVICE] terminal.

Connect a smart device to the

instrument (as an access point).

Connect the UD-WL01 to the USB [TO

DEVICE] terminal.

Hold down the WPS button on the UD-

WL01 for three seconds.

The message as follows appears

on the display, indicating the

instrument is in standby for the

connection.

Press the WPS button on your access

point within two minutes after step 2.

SH2 Owner’s Manual

 Listening to audio data from a smart device through this instrument

(Bluetooth Audio function)

This instrument is equipped with Bluetooth functionality. You can input the sound of the audio data saved in a

Bluetooth-equipped device, such as a smart phone, to this instrument and listen to it through the built-in

speaker of the instrument.

*Bluetooth

Bluetooth is a technology for wireless communication between devices within an area of about 10 meters (33 ft.) employing

the 2.4 GHz frequency band. In this manual, “Bluetooth-equipped device” means a device that can transmit the audio data

saved in it to the instrument using the Bluetooth function via wireless communication; for example, smart phone, digital audio

player, etc. For proper operation, the device must be compatible with A2DP (Advanced Audio Distribution Profile).

Pairing with Bluetooth-equipped devices

If you wish to connect your Bluetooth-equipped device to the instrument via Bluetooth, the device needs to be

paired with the instrument first. Once the Bluetooth-equipped device has been paired with this instrument,

there is no need to perform pairing again.

Pairing

“Pairing” means to register Bluetooth-equipped devices on this instrument, and establish the mutual recognition for wireless

communication between the two.

NOTE

• Only one Bluetooth-equipped device can be connected to this instrument at a time (although up to 8 devices can be paired

to this instrument). When pairing with the 9th Bluetooth-equipped device has succeeded, pairing data for the device with

the oldest connection date will be deleted.

• Paring can also be operated in the Function “F8.6” (page 44).

Before using the Bluetooth function, be sure to read “About Bluetooth communications” on page 9.

Press the Mode button several times

until the [UTILITY] lamp lights up

in orange.

NOTE

• When the Bluetooth function of this instrument is

set to off ( Bluetooth lamp is off), paring cannot

be established when executing the paring operation. Make sure to set the Bluetooth function to on (page 53), and

then start pairing.

• When no Bluetooth-equipped device is connected, the (Bluetooth) lamp lights up in white in the UTILITY mode,

and turns off in other modes.

Hold down Button 3 [Func.] for three

seconds.

The instrument will enter into Pairing mode.

At the same time the (Bluetooth) lamp will

flash and a “bt” message will appear on the

display.

NOTE

To cancel the pairing, press Button 3 [Func.] while “bt” is shown in the display.

On your Bluetooth-equipped device, set the Bluetooth function to on and select

“YAMAHA_SH2_TA2” from the connection list.

For details, refer to the Bluetooth-equipped device owner’s manual.

After pairing is completed, the (Bluetooth) lamp will light up in blue and the “bt” message will

disappear.

NOTE

• Make sure to complete the settings on the Bluetooth-equipped device within 5 minutes. After 5 minutes elapses, the

Pairing mode ends automatically and the (Bluetooth) lamp turns off.

• If you are required to enter a passkey, enter the numerals “0000.”

Lights up in orange

Hold down for three seconds.

English

SH2 Owner’s Manual

 Turning the Bluetooth function on/off

By default, the Bluetooth function will be set to on right after turning the instrument’s power on. However, you

can set the function to off when you want to disconnect the connection between the instrument and the

Bluetooth-equipped device, or when you want to try to connect the device to the instrument again, etc.

To exit from the Function Settings, select another mode.

Play back audio data on your Bluetooth-equipped device to confirm that the built-

in speakers of this unit can output the audio sound.

When you turn on this unit the next time, the last connected Bluetooth-equipped device will be

connected to this instrument automatically, if the Bluetooth function of the device and the instrument is

set to on. If it is not connected automatically, select the model name of the instrument from the

connections list on the device.

NOTE

You can adjust the volume of the sound input via Bluetooth by the [VOLUME] control on this instrument. To adjust the

volume balance between your keyboard performance and the input sound via Bluetooth, adjust the volume on the

Bluetooth-equipped device.

Press the Mode button several times

until the [UTILITY] lamp lights up

in orange.

Press Button 3 [Func.] to enter the

Function Settings.

Rotate the [VOICE/VALUE] control

to select the Function number “F8.5.”

Press Button 3 [Func.] to display the

parameter value.

Rotate the [VOICE/VALUE] control

to select “On” or “OFF.”

Chapter

SH2 Owner’s Manual

6 Using Other Functions

Backup data and initialization

The following settings, referred to as Backup data, are automatically saved to the internal memory of this unit.

The Backup data and the User Song and External Song data will be maintained even if the power is turned off.

• Brilliance..........................................................................................page 36

• Touch Sensitivity ............................................................................page 36

• Master Tune ....................................................................................page 37

• Metronome Volume.......................................................................page 38

• MIDI Song/Keyboard Volume Balance.......................................page 38

• Audio Song Volume .......................................................................page 39

• Half Pedal Point..............................................................................page 39

• Binaural on/off................................................................................page 40

• VRM on/off ....................................................................................page 40

• MIDI Transmit Channel................................................................page 42

• AUX IN Noise Gate on/off............................................................page 43

• Audio Loop Back on/off ................................................................page 44

• Auto Power Off on/off ...................................................................page 43

• Bluetooth function on/off .............................................................page 44

• Bluetooth Pairing information .....................................................page 44

• Character Code...............................................................................page 55

 Initializing the instrument (Clearing the Backup data)

While holding down the C7 key, turn on the power by pressing the [] (Standby/On) switch. “CLr” appears on

the display and the Backup data (with the exception of “Character Code” and “Bluetooth Paring information”)

will be initialized. Note that User Songs and External Songs are not erased.

NOTICE

While “CLr” is shown in the display, never turn off the power. Doing so may delete the User Song and External Song

data, or corrupt the Backup data.

NOTE

If this instrument somehow becomes disabled or malfunctions, turn off the power to the instrument, then perform the

initialization procedure.

C7: Highest key

English

SH2 Owner’s Manual

Setting the Character Code for file names

If the Song cannot be called up, you may need to select the appropriate Character Code which is compatible

with the file/folder name from the following two settings.

 To set to International

While holding down Button 2, turn on the power by pressing the [ ] (Standby/On) switch.

International is selected, and “Int” appears on the display.

 To set to Japanese

While holding down the Mode button and Button 2, turn on the power by pressing the [] (Standby/On)

switch.

Japanese is selected, and “JA” appears on the display.

NOTE

The setting here is maintained even when the power is turned off.

Setting range

Int (International) For playing back Songs with names using western European

characters (including umlaut or diacritic marks).

JA (Japanese) For playing back Songs with names using Japanese characters and

alphabets (excluding umlaut or diacritic marks).

Default setting

Int

Chapter

SH2 Owner’s Manual

7 Appendix

Message List

Message Descriptions

The instrument is standing by for Bluetooth pairing. While this message is shown, you cannot operate

the instrument.

Displayed while the instrument is initialized. Do not turn the power off while this message is shown.

Displayed when Musicsoft Downloader is used on the connected computer, or when an app such as

Smart Pianist is used on the connected smart device such as an iPhone and iPad. While this message

is shown, you cannot operate the instrument.

Displayed when the Character Code setting (page 55) is not appropriate for the file name of the Song

which you are selecting. Change the Character Code setting.

Displayed when the data format is not compatible with this instrument, or the data has some other

problems. This Song cannot be selected.

Displayed when no USB flash drive can be found, or a problem has occurred in the USB flash drive.

Disconnect and connect the device again, then execute the operation. If this message appears

repeatedly even when there aren’t any other likely problems, the USB flash drive may be damaged.

The Song you have selected cannot be copied or deleted on this instrument. Copy or delete these

types of Songs on a computer.

The memory or the number of the files in the copy destination USB flash drive is full. Remove any

unnecessary files in the USB flash drive.

Indicates that the USB flash drive is protected.

Displayed when the memory of the USB flash drive becomes full, or the number of files and folders

exceeds the system limit.

Displayed when Audio Song playback or recording has failed. If you are using a USB flash drive to

which data has already been stored or deleted a number of times, first make sure that the device does

not contain important data, then format it (page 46) and connect to the instrument again.

A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized

distributor.

A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized

distributor.

Displayed when the current operation is completed.

The memory of the instrument or the USB flash drive is running out. We recommend that you remove

any unnecessary User Songs (page 28) to ensure sufficient memory capacity before start recording.

The operation could not be completed because the instrument’s internal memory or the USB flash

drive is nearly full. If this message is shown while recording, your performance data may not be

correctly saved.

Confirms whether each operation is executed or not.

Displayed when you try to overwrite or delete a protected Song or read-only file.

Displayed when an unformatted USB flash drive is connected. First make sure that the device does not

contain important data, then format it (page 46).

Communication with the USB flash drive has been shut down because of overcurrent to the USB flash

drive. Disconnect the USB flash drive from the [USB TO DEVICE] terminal, then turn on the power of

the instrument again.

English

SH2 Owner’s Manual

* When an operation (such as saving or data transfer) is in progress, the display shows a sequence of flashing dashes.

* Press any button to exit from these message displays.

Communication with the USB flash drive has failed. Remove the USB flash drive and make the

connection again. If the message appears even when the USB flash drive is connected properly, the

USB flash drive may be damaged.

This USB flash drive is not supported on this instrument, or too many USB flash drives may have been

connected. Refer to “Connecting USB devices” (page 45) for information on the USB flash drive

connection.

The instrument is in Access Point mode and standing by for connection to an access point by WPS

(page 51). While this message is shown, you cannot operate the instrument.

A malfunction occurred in the instrument while it was standing by for connection to an access point by

WPS (page 51). Reconnect the UD-WL01 (sold separately) to the instrument and try to connect to the

access point by WPS again.

Message Descriptions

SH2 Owner’s Manual

Troubleshooting

If you have problems with the unit, here are a few troubleshooting tips. If you cannot solve the problem easily

yourself, consult your Yamaha piano dealer. DO NOT attempt to repair the piano or the AC adaptor yourself.

Problem Cause Solution

The power does not turn on. The AC adaptor may not be plugged in

correctly.

Insert the AC adaptor firmly into the

[DCIN 16V] jack and AC outlet (page 15).

The power is automatically turned

off.

This is normal and due to the Auto Power

Off function.

If necessary, disable the Auto Power Off

function (pages 16 and 43).

The overall volume is low, or no

sound is heard.

The [VOLUME] control may be turned to

the far left position.

Adjust the volume to an optimal level

(page 17).

Local Control is set to off. Make sure that Local Control (page 42) is

on.

The acoustic piano emits sound

when playing with the Silent

Piano™ function active.

Playing with extreme force may result in

sound being emitted from the acoustic

piano.

Moderate the strength of your playing.

The balance or volume varies

between the included

headphones and the

commercially available

headphones.

Headphone properties differ depending

on their type, so different headphones

may have different balance or volume

characteristics.

Use the same type of headphones for

optimum performance.

A rattling sound from the piano

body can be heard when playing

with the Silent Piano™ function.

This is not a fault. It is the sound of the acoustic piano’s keystroke.

When playing a rapid series of

notes with the Silent Piano™

function, a sound louder than

expected (considering playing

strength) occurs.

This is not a fault. The structure of the Silent Piano™ causes this to occur in some

cases.

Sound is not output properly or

evenly.

Since the keyboard was pressed when

the power is turned on, the keyboard

position is detected incorrectly.

Turn off the power and turn it on again to

reset the function. Do not touch any keys

when turning the power on.

No Reverb effect is applied to the

sound.

The Reverb depth may be set to

minimum.

Increase the Reverb Depth to apply an

appropriate amount of Reverb (page 30).

The sound lingers excessively. The Reverb depth or the Damper

Resonance effect depth may be set to an

excessive level.

Set these parameters to an appropriate

level (pages 30 and 41).

Noise is heard from the

headphones or speakers.

The noise may be due to interference

caused by the use of a mobile phone in

close proximity to the instrument.

Turn the mobile phone off, or use it away

from the instrument.

The headphones or speakers may not be

connected correctly.

Connect the headphones or speakers to

the corresponding jacks firmly (pages 16

and 47).

Noise can be heard when you use the

instrument along with the application on

your smart device, such as an iPhone and

iPad.

When you use the instrument along with a

smart device, we recommend that you set

“Airplane Mode” to on and then the Wi-Fi/

Bluetooth setting to on in order to avoid

noise caused by communication.

The pitch of this instrument is

different from that of other

instruments.

The pitch is different depending on the

instrument.

You can adjust the pitch of this instrument

to match that of other instruments

(page 37).

English

SH2 Owner’s Manual

*The message list (page 56) is also provided for your reference.

The Bluetooth-equipped device

cannot be paired with nor

connected to this instrument.

The Bluetooth function of this instrument

is off.

Make sure that the Bluetooth function is

turned on (page 53).

The Bluetooth-equipped device is not

paired with this instrument.

The device and this instrument need to be

paired to each other via Bluetooth

(page 52).

The Bluetooth function of the Bluetooth-

equipped device is not activated.

Make sure that the function is activated.

This instrument and the Bluetooth-

equipped device are too far apart.

Use the device in close proximity to this

instrument.

There is a device (microwave oven,

wireless LAN device, etc.) that outputs

signals in the 2.4 GHz frequency band

nearby.

Move the instrument away from any

devices that might be emitting radio-

frequency signals.

Sound input via Bluetooth is

interrupted.

The output volume of the Bluetooth-

equipped device connected to this

instrument is too low, resulting in the

sound being cut off via the Noise Gate

after it is input to this instrument.

Increase the output volume of the device.

The volume level reproduced via this

instrument can be adjusted by using the

[VOLUME] control.

Sound input to the [AUX IN] jacks

is interrupted.

The output volume of the external device

connected to this instrument is too low,

resulting in the sound being cut off via the

Noise Gate after it is input to this

instrument.

Increase the output volume of the external

device. The volume level reproduced via

this instrument can be adjusted by using

the [VOLUME] control.

Set the Noise Gate to off (page 43).

Problem Cause Solution

SH2 Owner’s Manual

Voice L ist

The cells marked by “” indicate the available characteristics (which are explained below) for the Voice.

• Stereo Sampling: Stereo sampling is used for the Voice.

• Touch Sensitivity: The volume responds to your playing strength.

• Key-off Sampling: The key-off sound (the subtle sound that occurs when you release a key) is sampled for

the Voice.

• VRM: Simulated string resonance sound with physical modeling when the damper pedal is pressed or keys

are pressed. This can be turned on or off. For details, refer to page 40.

Display Voice N ame Description

Stereo

Sam-

pling

Touch

Sensi-

tivity

Key-off

Sam-

pling

VRM

Piano

Binaural CFX

Grand

Yamaha’s CFX concert grand piano sound

sampled by Binaural Sampling, the method

optimized for headphone use. Listening this

through headphones gives the impression of

being immersed in the sound, as if it was

actually emanating from the piano. This is

available when the Binaural setting is turned on

(page 40).



CFX Grand Yamaha’s CFX concert grand piano sound with

a wide dynamic range for maximum expressive

control. Suitable for playing in any music genre

and style. This is available when the Binaural

setting is turned off (page 40).



Bösendorfer

Imperial

The famed sound of the Vienna-made

Bösendorfer Imperial concert grand piano. Its

spacious sound evokes the size of the

instrument, and is ideal for expressing

tenderness in compositions.



Upright Piano The sound sampled from an upright piano, the

Yamaha SU7. Enjoy the unique tonal character

and a lighter, more casual feel.

 – 

Pop Grand A slightly brighter piano sound. Good for popular

styles.



Ballad Grand Grand piano sound with a soft and warm tone.

Good for playing ballads.



E. Piano

Stage E.Piano The sound of an electric piano using hammer-

struck metallic “tines.” A soft tone results when

played lightly, and an aggressive tone when

played hard.

–  –

DX E.Piano An electronic piano sound produced by an FM

synthesizer. The tone will change as you vary

your playing touch. Ideal for popular music.

–  – –

Vintage E.Piano A different type of electric piano sound than

Stage E. piano. Widely used in rock and popular

music.

–  –

English

SH2 Owner’s Manual

Harpsichord

Harpsichord 8' The sound of an instrument frequently used in

baroque music. Variations in playing touch will

not affect the volume, and a characteristic sound

will be heard when you release the key.

 –  –

Harpsichord

8'+4'

A harpsichord with an added upper octave.

Produces a more brilliant sound.

 –  –

Celesta The sound of a celesta (a percussion instrument

in which hammers strike tuned metal bars).This

instrument is well-known for its appearance in

“Dance of the Sugarplum Fairies” from

Tchaikovsky’s “Nutcracker Suite.”

 – –

Organ

Organ Principal This Voice features the combination of pipes

(8'+4'+2') of a principal (brass instrument) organ.

It is suitable for Baroque church music.

 – – –

Organ Tutti This Voice features a full coupler of a pipe organ,

famous for the sound used in Toccata and Fugue

by Bach.

 – – –

Jazz Organ The sound of a “tonewheel” type electric organ.

Sampled with a Rotary SP effect, its rotation

speed is slow. Often heard in jazz and rock

idioms.

– – – –

Pad

Strings Stereo-sampled, large-scale strings ensemble

with realistic reverb. Try combining this Voice

with piano in the Dual mode.

 – –

Choir A large, spacious choir Voice. Perfect for

creating rich harmonies in slow pieces.

 – –

Synth Pad A warm, mellow, and spacious synth sound.

Ideal for sustained parts in the background of an

ensemble.

–  – –

Layer

Piano + Strings Combination of piano and strings ensemble

Voices, giving you a richly textured sound as if

you were playing the piano with orchestral

accompaniment.

 –

Piano + Pad Combination of piano and Synth Pad Voices.  –

Piano

+ DX E.Piano

Combination of piano and DX E. Piano Voices.  –

Display Voice Name Description

Stereo

Sam-

pling

Touch

Sensi-

tivity

Key-off

Sam-

pling

VRM

SH2 Owner’s Manual

Song List

 Voice Demo Songs

 Preset Songs (50 Classical Music Masterpieces)

No. Voice Name Song Name Composer

d.01

CFX Grand

Widmung S.566 R.253 F. Liszt / R. Schumann

Binaural CFX Grand

d.02

Bösendorfer Imperial Mädchens Wunsch (6 Chants polonaise S.480 R.145) F. Liszt / F. F. Chopin

d.03

Upright Piano Italienisches Konzert, BWV 971 1st mov. J. S. Bach

d.04

Pop Grand Original —

d.05

Ballad Grand Original —

d.06

Stage E.Piano Original —

d.07

DX E.Piano Original —

d.08

Vintage E.Piano Original —

d.09

Harpsichord 8'

Concerto a cembalo obbligato, 2 violini, viola e continuo

No.7, BWV 1058

J. S. Bach

d.10

Harpsichord 8'+4' Gigue, Französische Suiten No.5, BWV 816 J. S. Bach

d.11

Celesta Danse de la Fée Dragée P. I. Tchaikovsky

d.12

Organ Principal Herr Christ, der ein'ge Gottes-Sohn, BWV 601 J. S. Bach

d.13

Organ Tutti Original —

d.14

Jazz Organ Original —

d.15

Strings Original —

d.16

Choir Original —

d.17

Synth Pad Original —

d.18

Piano + Strings Original —

d.19

Piano + Pad Original —

d.20

Piano + DX E.Piano Original —

No. Song Name Composer

Arrangements

P.0 1

Canon D dur J. Pachelbel

P.0 2

Air On the G Strings J. S. Bach

P.0 3

Jesus, Joy of Man’s Desiring J. S. Bach

P.0 4

Twinkle, Twinkle, Little Star Traditional

P.0 5

Piano Sonate op.31-2 “Tempest” 3rd mov. L. v. Beethoven

P.0 6

Ode to Joy L. v. Beethoven

P.0 7

Wiegenlied op.98-2 F. P. Schubert

P.0 8

Grande Valse Brillante F. F. Chopin

P.0 9

Polonaise op.53 “Héroïque” F. F. Chopin

P.1 0

La Campanella F. Liszt

P.11

Salut d’amour op.12 E. Elgar

P.1 2

From the New World A. Dvořák

P.1 3

Sicilienne G. U. Fauré

P.1 4

Clair de lune C. A. Debussy

P.1 5

Jupiter (The Planets) G. Holst

English

SH2 Owner’s Manual

Duets

P. 1 6

Menuett (Eine kleine Nachtmusik K.525) W. A. Mozart

P. 1 7

Menuett G dur L. v. Beethoven

P. 1 8

Marcia alla Turca L. v. Beethoven

P. 1 9

Piano Concerto No.1 op.11 2nd mov. F. F. Chopin

P. 2 0

The Nutcracker Medley P. I. Tchaikovsky

Original Compositions

P. 2 1

Prelude (Wohltemperierte Klavier I No.1) J. S. Bach

P. 2 2

Menuett G dur BWV Anh.114 J. S. Bach

P. 2 3

Piano Sonate No.15 K.545 1st mov. W. A. Mozart

P. 2 4

Turkish March W. A. Mozart

P. 2 5

Piano Sonate op.13 “Pathétique” 2nd mov. L. v. Beethoven

P. 2 6

Für Elise L. v. Beethoven

P. 2 7

Piano Sonate op.27-2 “Mondschein” 1st mov. L. v. Beethoven

P. 2 8

Impromptu op.90-2 F. P. Schubert

P. 2 9

Frühlingslied op.62-6 J. L. F. Mendelssohn

P. 3 0

Fantaisie-Impromptu F. F. Chopin

P. 3 1

Etude op.10-3 “Chanson de l’adieu” F. F. Chopin

P. 3 2

Etude op.10-12 “Revolutionary” F. F. Chopin

P. 3 3

Valse op.64-1 “Petit chien” F. F. Chopin

P. 3 4

Nocturne op.9-2 F. F. Chopin

P. 3 5

Nocturne KK4a-16/BI 49 [Posth.] F. F. Chopin

P. 3 6

Träumerei R. Schumann

P. 3 7

Barcarolle P. I. Tchaikovsky

P. 3 8

La prière d'une Vierge T. Badarzewska

P. 3 9

Liebesträume No.3 F. Liszt

P. 4 0

Blumenlied G. Lange

P. 4 1

Humoresque A. Dvořák

P. 4 2

Arietta E. H. Grieg

P. 4 3

Tango (España) I. Albéniz

P. 4 4

The Entertainer S. Joplin

P. 4 5

Maple Leaf Rag S. Joplin

P. 4 6

La Fille aux Cheveux de Lin C. A. Debussy

P. 4 7

Arabesque No.1 C. A. Debussy

P. 4 8

Cakewalk C. A. Debussy

P. 4 9

Je te veux E. Satie

P. 5 0

Gymnopédies No.1 E. Satie

No. Song Name Composer

SH2 Owner’s Manual

Playback sequence of Song files in a USB flash drive

The illustration below shows the playback sequence of Song files stored on the USB flash drive.

 Playback sequence of User Songs

User Songs are named as follows, and saved in the USER FILES folder.

The “**” section indicates the Song number. Songs are played back in order of the number in the “**” section.

• USERSONG**.MID (MIDI Song)

•USERAUDIO**.WAV (Audio Song)

 Playback sequence of External Songs

NOTE

This unit cannot recognize Song files saved in a folder lower than the third level. If you manage Song files in a USB flash drive

with a computer, make sure to save them to the first, second or third level folder.

Priority Folder/File

1 Root folder Songs are played back first in numeric order, and then in alphabetical

order.

2 General folders

BBB.mid

AAA.mid

BBB.mid

AAA.mid

BBB.mid

AAA.mid

USB flash drive

First level Second level Third level Fourth level

Cannot be played.

General folders

Can be played.

Root folder

USER FILES

Folder A

Folder B Sub Folder B

Sub Folder A Sub Folder A Sub Folder A

English

SH2 Owner’s Manual

Specifications

Upright Piano Grand Piano

Control

Interface

Keyboard Touch Response Hard, Medium/Hard, Medium, Soft/Medium, Soft, Fixed

Pedal Damper, Silencing/Sostenuto

Soft

Damper, Sostenuto

, Soft

Sensor

System

Key Sensors Non-contact continuous detection optical sensor

Hammer Sensors

–

Non-contact 2-point

optical fiber sensor

Damper Pedal Continuous detection sensor

Sostenuto Pedal On/Off detection sensor

Soft Pedal On/Off detection sensor

Silencing

System

Mechanism Hammer shank stopper operated

by silencing pedal/silencing

lever

Hammer shank stopper operated

by motor drive

Action – Quick Escape mechanism

Voices Tone

Generation

Piano Sound Yamaha CFX, Bösendorfer Imperial

Binaural Sampling Yes (CFX Grand Voice only)

Piano Effect VRM Ye s

Key-off Samples Ye s

Smooth Release Ye s

Polyphony (max.) 256

Preset Number of Voices 20

Voices for Song Playback 480 XG Voices + 12 Drum/SFX Kits

Effects Types Reverb Ye s

Brilliance Ye s

Stereophonic Optimizer Ye s

Songs (MIDI) Preset Number of Preset Songs 20 Voice Demo Songs, 50 Classics

Recording Number of Songs 10

Data Capacity approx. 500 KB/Song

Format Playback SMF (Format 0, Format 1)

Recording SMF (Format 0)

Recording/

Playback

(Audio)

Recording Time (max.) 80 minutes/Song

Format Playback WAV (44.1 kHz, 16 bit, stereo)

Recording WAV (44.1 kHz, 16 bit, stereo)

Functions Overall

Controls

Metronome Ye s

Tempo Range 5 – 500

Transpose -12 – 0 – +12

Tuning 414.8 – 440.0 – 466.8 Hz

(approx. 0.2 Hz increments)

USB Audio Interface 44.1 kHz, 16 bit, stereo

Bluetooth Bluetooth version 4.1

Supported profile A2DP

Compatible codec SBC

Wireless output Bluetooth class 2

Maximum

communication distance

approx. 10 m (33 ft)

Range of transmit

frequency

2,402 – 2,480 MHz

Maximum RF output

Power

4 dBm

SH2 Owner’s Manual

*1 For models equipped with a sostenuto pedal.

The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the

Yamaha website then download the manual file. Since specifications, equipment or separately sold accessories may not be

the same in every locale, please check with your Yamaha dealer.

Storage and

Connectivity

Storage Internal Memory approx. 1.3 MB

External Drives USB flash drive

Connectivity DC IN 16 V

Headphones Stereo mini jack (x2)

MIDI IN/OUT

AUX IN Stereo mini jack

AUX OUT [L/L+R] [R] (Standard phone jack)

USB TO DEVICE Ye s

USB TO HOST Ye s

Power Supply AC Adaptor PA-300C (or an equivalent recommended by Yamaha)

Power Consumption 12W (When using PA-300C AC adaptor)

Auto Power Off Ye s

Weight

(excluding the weight of the piano body)

4 kg (8 lb, 13 oz) 9 kg (19 lb, 13 oz)

Included Accessories AC adaptor*, power cord*, headphones, headphone hanger,

attachment screws for headphone hanger,

“50 Classical Music Masterpieces” music book, Owner’s Manual

*May not be included depending on your area. Check with your Yamaha dealer.

Separately Sold Accessories

(May not be available depending on your area.)

USB wireless LAN adaptor (UD-WL01),

wireless MIDI adaptor (UD-BT01/MD-BT01)

Upright Piano Grand Piano

SH2 Owner’s Manual

English

Index

Access Point mode ..................... 51

Accessories .................................. 10

Aliquot Resonance ..................... 41

All-repeat playback .................... 21

Audio Loop Back ........................ 44

Audio recording ......................... 24

Audio Song .................................. 20

Auto Power Off .................... 16, 43

[AUX IN] jack ............................ 48

AUX IN Noise Gate ................... 43

AUX OUT jacks ......................... 47

Backup data ................................. 54

Base note ...................................... 38

Beat ............................................... 33

Binaural ....................................... 40

Binaural Sampling ...................... 19

Bluetooth ..................................... 53

Bluetooth Audio ......................... 52

Body Resonance ......................... 42

Brilliance ...................................... 36

Character Code ........................... 55

Computer .................................... 50

Computer-related Operations .. 10

Continuous playback ................. 21

Control unit ................................ 13

Copy (User Song) ....................... 27

Damper Resonance .................... 41

Delete (User Song) ..................... 28

Demo Song ............................ 20, 62

Display ......................................... 14

External Song .............................. 20

Fast forward ................................ 22

Fixed velocity .............................. 36

Format (USB flash drive) .......... 46

Function settings ........................ 34

Half Pedal .................................... 39

Headphone hanger ..................... 16

Headphones ................................ 16

Included Accessories ..................10

Infrastructure mode ...................51

Initialization ................................54

Keyboard transpose ....................36

Key-off Sampling ........................42

Local Control ...............................42

Master Tune ................................37

Message List .................................56

Metronome ..................................32

MIDI jacks ...................................49

MIDI recording ...........................24

MIDI Song ...................................20

MIDI transmit channel ..............42

Noise Gate ...................................43

Pairing ....................................44, 52

Pause .............................................22

Pedal .............................................12

Playback .......................................20

Playback sequence (Song) .........64

Power ............................................15

Preset Song ............................20, 62

Random playback .......................21

Recording .....................................24

Reverb ...........................................30

Rewind .........................................22

Scale type ......................................37

Silencing lever .......................12, 17

Silent Piano function ..................17

Smart device ................................50

Smart Pianist ...............................11

Song (playback sequence) ..........64

Song Category .............................20

Song List .......................................62

SONG mode ..........................13, 20

Song transpose ............................39

Specifications ...............................65

Stereophonic Optimizer ............19

Stop ...............................................22

String Resonance ........................41

Temperament ............................. 37

Tempo (metronome) ................. 32

Tempo (Song) ............................. 23

Time signature ............................ 33

Touch Sensitivity (Touch

Responce) .................................... 36

Transpose (keyboard) ................ 36

Transpose (Song) ....................... 39

Troubleshooting ......................... 58

Tuning ......................................... 37

USB Audio Interface .................. 51

USB device .................................. 45

USB flash drive ........................... 45

USB [TO DEVICE] terminal .... 45

USB wireless LAN ...................... 51

User Song .............................. 20, 27

UTILITY mode ..................... 13, 30

Version ........................................ 44

Voice ............................................ 18

Voice Demo Song ................ 20, 62

Voice List ............................... 19, 60

VOICE mode ........................ 13, 18

Volume (Audio Song) ............... 39

Volume (master volume) .......... 18

Volume (metronome) ............... 38

Volume (MIDI Song) ................ 38

VRM (Virtual Resonance

Modeling) .................................... 40

SH2 Owner’s Manual

MEMO

SH2 Owner’s Manual

For U.S.A.

For CANADA

For U.S.A. and CANADA

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2)

l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en

compromettre le fonctionnement.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the

FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption rate (SAR).

Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé

et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d’exposition et d’exposition aux fréquences

radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme

sans évaluation du débit d’absorption spécifique (DAS).

SH2 Owner’s Manual

For EU countries

BG Bulgarian

ОПРОСТЕНА ЕС ДЕКЛАРАЦИЯ ЗА СЪОТВЕТСТВИЕ

С настоящото Yamaha Music Europe GmbH декларира, че този тип

радиосъоръжение [SH2] е в съответствие с Директива 2014/53/ЕС.

Цялостният текст на ЕС декларацията за съответствие може да се

намери на следния интернет адрес:

https://europe.yamaha.com/en/support/compliance/doc.html

ES Spanish

DECLARACIÓN UE DE CONFORMIDAD SIMPLIFICADA

Por la presente, Yamaha Music Europe GmbH declara que el tipo de equipo

radioeléctrico [SH2] es conforme con la Directiva 2014/53/UE. El texto com-

pleto de la declaración UE de conformidad está disponible en la dirección

Internet siguiente:

https://europe.yamaha.com/en/support/compliance/doc.html

CS Czech

ZJEDNODUŠENÉ EU PROHLÁŠENÍ O SHODĚ

Tímto Yamaha Music Europe GmbH prohlašuje, že typ rádiového zařízení

[SH2] je v souladu se směrnicí 2014/53/EU. Úplné znění EU prohlášení o

shodě je k dispozici na této internetové adrese:

https://europe.yamaha.com/en/support/compliance/doc.html

DA Danish

FORENKLET EU-OVERENSSTEMMELSESERKLÆRING

Hermed erklærer Yamaha Music Europe GmbH, at radioudstyrstypen [SH2]

er i overensstemmelse med direktiv 2014/53/EU. EU-overensstemmelseser-

klæringens fulde tekst kan findes på følgende internetadresse:

https://europe.yamaha.com/en/support/compliance/doc.html

DE German

VEREINFACHTE EU-KONFORMITÄTSERKLÄRUNG

Hiermit erklärt Yamaha Music Europe GmbH, dass der Funkanlagentyp [SH2]

der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-

Konformitätserklärung ist unter der folgenden Internetadresse verfügbar:

https://europe.yamaha.com/en/support/compliance/doc.html

ET Estonian

LIHTSUSTATUD ELI VASTAVUSDEKLARATSIOON

Käesolevaga deklareerib Yamaha Music Europe GmbH, et käesolev raadio-

seadme tüüp [SH2] vastab direktiivi 2014/53/EL nõuetele. ELi vastavusdekla-

ratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil:

https://europe.yamaha.com/en/support/compliance/doc.html

EL Greek

ΑΠΛΟΥΣΤΕΥΜΕΝΗ ΔΗΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ ΕΕ

Με την παρούσα ο/η Yamaha Music Europe GmbH, δηλώνει ότι ο ραδιοεξο-

πλισμός [SH2] πληροί την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλω-

σης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο:

https://europe.yamaha.com/en/support/compliance/doc.html

EN English

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Yamaha Music Europe GmbH declares that the radio equipment type

[SH2] is in compliance with Directive 2014/53/EU. The full text of the EU dec-

laration of conformity is available at the following internet address:

https://europe.yamaha.com/en/support/compliance/doc.html

FR French

DECLARATION UE DE CONFORMITE SIMPLIFIEE

Le soussigné, Yamaha Music Europe GmbH, déclare que l'équipement

radioélectrique du type [SH2] est conforme à la directive 2014/53/UE. Le texte

complet de la déclaration UE de conformité est disponible à l'adresse internet

https://europe.yamaha.com/en/support/compliance/doc.html

HR Croatian

POJEDNOSTAVLJENA EU IZJAVA O SUKLADNOSTI

Yamaha Music Europe GmbH ovime izjavljuje da je radijska oprema tipa

[SH2] u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o

sukladnosti dostupan je na sljedećoj internetskoj adresi:

https://europe.yamaha.com/en/support/compliance/doc.html

IT Italian

DICHIARAZIONE DI CONFORMITÀ UE SEMPLIFICATA

Il fabbricante, Yamaha Music Europe GmbH, dichiara che il tipo di apparec-

chiatura radio [SH2] è conforme alla direttiva 2014/53/UE. Il testo completo

della dichiarazione di conformità UE è disponibile al seguente indirizzo Inter-

net:

https://europe.yamaha.com/en/support/compliance/doc.html

LV Latvian

VIENKĀRŠOTA ES ATBILSTĪBAS DEKLARĀCIJA

Ar šo Yamaha Music Europe GmbH deklarē, ka radioiekārta [SH2] atbilst

Direktīvai 2014/53/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams

šādā interneta vietnē:

https://europe.yamaha.com/en/support/compliance/doc.html

LT Lithuanian

SUPAPRASTINTA ES ATITIKTIES DEKLARACIJA

Aš, Yamaha Music Europe GmbH, patvirtinu, kad radijo įrenginių tipas [SH2]

atitinka Direktyvą 2014/53/ES. Visas ES atitikties deklaracijos tekstas

prieinamas šiuo interneto adresu:

https://europe.yamaha.com/en/support/compliance/doc.html

HU Hungarian

EGYSZERŰSÍTETT EU-MEGFELELŐSÉGI NYILATKOZAT

Yamaha Music Europe GmbH igazolja, hogy a [SH2] típusú rádióberendezés

megfelel a 2014/53/EU irányelvnek. Az EU-megfelelőségi nyilatkozat teljes

szövege elérhető a következő internetes címen:

https://europe.yamaha.com/en/support/compliance/doc.html

NL Dutch

VEREENVOUDIGDE EU-CONFORMITEITSVERKLARING

Hierbij verklaar ik, Yamaha Music Europe GmbH, dat het type radioapparatuur

[SH2] conform is met Richtlijn 2014/53/EU. De volledige tekst van de EU-con-

formiteitsverklaring kan worden geraadpleegd op het volgende internetadres:

https://europe.yamaha.com/en/support/compliance/doc.html

PL Polish

UPROSZCZONA DEKLARACJA ZGODNOŚCI UE

Yamaha Music Europe GmbH niniejszym oświadcza, że typ urządzenia radio-

wego [SH2] jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgod-

ności UE jest dostępny pod następującym adresem internetowym:

https://europe.yamaha.com/en/support/compliance/doc.html

PT Portuguese

DECLARAÇÃO UE DE CONFORMIDADE SIMPLIFICADA

O(a) abaixo assinado(a) Yamaha Music Europe GmbH declara que o pre-

sente tipo de equipamento de rádio [SH2] está em conformidade com a Dire-

tiva 2014/53/UE. O texto integral da declaração de conformidade está

disponível no seguinte endereço de Internet:

https://europe.yamaha.com/en/support/compliance/doc.html

RO Romanian

DECLARAȚIA UE DE CONFORMITATE SIMPLIFICATĂ

Prin prezenta, Yamaha Music Europe GmbH declară că tipul de echipamente

radio [SH2] este în conformitate cu Directiva 2014/53/UE. Textul integral al

declarației UE de conformitate este disponibil la următoarea adresă internet:

https://europe.yamaha.com/en/support/compliance/doc.html

SK Slovak

ZJEDNODUŠENÉ EÚ VYHLÁSENIE O ZHODE

Yamaha Music Europe GmbH týmto vyhlasuje, že rádiové zariadenie typu

[SH2] je v súlade so smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o zhode je

k dispozícii na tejto internetovej adrese:

https://europe.yamaha.com/en/support/compliance/doc.html

SL Slovenian

POENOSTAVLJENA IZJAVA EU O SKLADNOSTI

Yamaha Music Europe GmbH potrjuje, da je tip radijske opreme [SH2]

skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na

voljo na naslednjem spletnem naslovu:

https://europe.yamaha.com/en/support/compliance/doc.html

FI Finnish

YKSINKERTAISTETTU EU-VAATIMUSTENMUKAISUUSVAKUUTUS

Yamaha Music Europe GmbH vakuuttaa, että radiolaitetyyppi [SH2] on

direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen

täysimittainen teksti on saatavilla seuraavassa internetosoitteessa:

https://europe.yamaha.com/en/support/compliance/doc.html

SV Swedish

FÖRENKLAD EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE

Härmed försäkrar Yamaha Music Europe GmbH att denna typ av radioutrust-

ning [SH2] överensstämmer med direktiv 2014/53/EU. Den fullständiga texten

till EU-försäkran om överensstämmelse finns på följande webbadress:

https://europe.yamaha.com/en/support/compliance/doc.html

TR Turkey

BASİTLEŞTİRİLMİŞ AVRUPA BİRLİĞİ UYGUNLUK BİLDİRİMİ

İşbu belge ile, Yamaha Music Europe GmbH, radyo cihaz tipinin [SH2],

Direktif 2014/53/AB'ye uygunluğunu beyan eder. AB uyumu beyanının tam

metni aşağıdaki internet adresinden edinilebilir:

https://europe.yamaha.com/en/support/compliance/doc.html

Yamaha Music Europe GmbH

Siemensstr. 22-34 25462 Rellingen, Germany

Tel: +49-4101-303-0

SH2 Owner’s Manual

Manual Development Group

Published 10/2019 MW-B0

YJ843B0

10-1, Naka-ku, Hamamatsu, 430-8650 JAPAN

Yamaha SH2 El manual del propietario

Marca: Yamaha

Modelo: SH2

Tipo: El manual del propietario

Descargar PDF

informe

En otros idiomas

français: Yamaha SH2 Le manuel du propriétaire
italiano: Yamaha SH2 Manuale del proprietario
English: Yamaha SH2 Owner's manual
Deutsch: Yamaha SH2 Bedienungsanleitung
русский: Yamaha SH2 Инструкция по применению
Nederlands: Yamaha SH2 de handleiding
português: Yamaha SH2 Manual do proprietário
dansk: Yamaha SH2 Brugervejledning
polski: Yamaha SH2 Instrukcja obsługi
čeština: Yamaha SH2 Návod k obsluze
svenska: Yamaha SH2 Bruksanvisning
Türkçe: Yamaha SH2 El kitabı
suomi: Yamaha SH2 Omistajan opas
română: Yamaha SH2 Manualul proprietarului

Yamaha SH2 El manual del propietario

Yamaha SH2 El manual del propietario

En otros idiomas

Documentos relacionados

Otros documentos