Yamaha DVD-S1200 El manual del propietario

Marca: Yamaha

Modelo: DVD-S1200

Categoría: Reproductores de DVD

Tipo: El manual del propietario

NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200

PROGRESSIVE ON

VIDEO OFF

GROUP

LEVEL

010

PHONES

STANDBY

/ON

AUDIO

VIDEO

CANCEL

OPEN/CLOSE

MARKER

TEX

ENTER

VIDEO OFF

PLAY MODE

SLOW

SUBTITLE

DVD

V739700

DIO

REPEAT

HP-V.S.S.

SP-V.S.S.

TOP MENU

ON SCREEN RETURN

PLAY LIST

DIRECT NAVI

T U

AUDIO

VIDEO

PLA

STO

AUDIO

VIDEO

DVD AUDIO/VIDEO PLAYER

Owners manual

Before connecting, operating or adjusting this product,

please read these instructions completely.

Please keep this manual for future reference.

RQT5938-W

Getting started

Dear customer

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EX-

POSURE.

DO NOT OPEN COVERS AND DO NOT RE-

PAIR YOURSELF. REFER SERVICING TO

QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK OR PRODUCT DAMAGE, DO NOT EX-

POSE THIS APPLIANCE TO RAIN, SPLASH-

ING, DRIPPING OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FUL-

LY INSERT.

This Class B digital apparatus complies with

Canadian ICES-003.

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user

to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of suffi-

cient magnitude to constitute a risk of electric shock

to persons.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE SCREWS.

NO USER-SERVICEABLE PARTS

INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the ap-

pliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

(Inside of product)

RQLS0233

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

AVOID DIRECT EXPOSURE TO BEAM.

DANGER

(FDA 21 CFR)

(IEC60825-1)

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

AVOID EXPOSURE TO BEAM.

CAUTION

RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D’OUVERTURE.

EXPOSITION DANGEREUSE AU FAISCEAU.

ATTENTION

SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.

UNDGÅ UDSÆTTELSE FOR STRÅLING.

ADVARSEL

AVATTAESSA OLET ALTTIINA NÄKYVÄÄ JA NÄKYMÄTÖN

LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.

VARO!

SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL

ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.

VARNING

SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES.

UNNGÅ EKSPONERING FOR STRÅLEN.

ADVARSEL

SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG

GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.

VORSICHT

FCC INFORMATION (for US customers only)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This

product, when installed as indicated in the instructions contained

in this manual, meets FCC requirements. Modifications not ex-

pressly approved by Yamaha may void your authority, granted

by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all in-

stallation instructions. Failure to follow instructions could void

your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with

the requirements listed in FCC Regulations, Part 15 for Class “B”

digital devices. Compliance with these requirements provides a

reasonable level of assurance that your use of this product in a

residential environment will not result in harmful interference with

other electronic devices.

This equipment generates/uses radio frequencies and, if not in-

stalled and used according to the instructions found in the users

manual, may cause interference harmful to the operation of other

electronic devices.

Compliance with FCC regulations does not guarantee that inter-

ference will not occur in all installations. If this product is found to

be the source of interference, which can be determined by turn-

ing the unit “OFF” and “ON”, please try to eliminate the problem

by using one of the following measures:

Relocate either this product or the device that is being affected

by the interference.

Utilize power outlets that are on different branch (circuit breaker

or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the an-

tenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type

of product. If you can not locate the appropriate retailer, please

contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe

Ave, Buena Park, CA 90620

The above statements apply ONLY to those products distributed

by Yamaha Corporation of America or its subsidiaries.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s

Consumer Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that lets the

sound come through loud and clear without annoying blaring

or distortion—and, most importantly, without affecting your

sensitive hearing. Since hearing damage from

loud sounds is often undetectable until it is too

late, YAMAHA and the Electronic Industries

Association’s Consumer Electronics Group

recommend you to avoid prolonged exposure

from excessive volume levels.

Getting started

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Disc information . . . . . . . . . . . . . . . . . . . . . . . . . 15

Disc handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

The remote control . . . . . . . . . . . . . . . . . . . . . . . 16

Control reference guide . . . . . . . . . . . . . . . . . . . 17

Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting an AV amplifier with a built-in decoder . . . . . . . . . 09

Connection to digital audio equipment without a decoder . . . . 09

Connecting an AV amplifier with 5.1-channel audio input

terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Analog connection to a 2-channel amplifier or system

component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connections using the S video or component video

terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Recording to MDs or cassette tapes . . . . . . . . . . . . . . . . . . . . 11

Basic operations

Basic play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Resume function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Starting play from a selected program, title, or track . . . . . . . . 13

Skipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Frame-by-frame viewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Fast forward and rewind—SEARCH . . . . . . . . . . . . . . . . . . . . 14

Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Selecting still pictures—Page Skip . . . . . . . . . . . . . . . . . . . . . 15

Selecting groups to play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

To enjoy even higher quality sound—VIDEO OFF . . . . . . . . . 15

To enjoy even higher quality picture—PROGRESSIVE ON . . 15

Advanced operations

Marking places to play again—MARKER . . . . . 16

Changing the play sequence . . . . . . . . . . . . . . . 17

All group play/Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Playing the programs on DVD-RAM . . . . . . . . . . 19

Selecting programs to play—DIRECT NAVIGATOR . . . . . . . . 19

Using the play list menu to play specific scenes . . . . . . . . . . . 20

Table of contents

Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Repeat play/A-B repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Increasing your enjoyment of movies and

music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Enjoying virtual surround effects with 2 speakers or

headphones (VIRTUAL SURROUND (V.S.S.)) . . . . . . . . . . 22

Using headphones . . . . . . . . . . . . . . . . . . . . . . . 22

Changing soundtracks, subtitle languages

and angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Using On-Screen Menu Icons . . . . . . . . . . . . . . . 24

Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Icons for disc information/Shuttle screen . . . . . . . . . . . . . . . . . 25

Icons for unit information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Changing settings . . . . . . . . . . . . . . . . . . . . . . . . 28

Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Summary of settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Entering a password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Television settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Speaker setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Reference

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Troubleshooting guide . . . . . . . . . . . . . . . . . . . . 35

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Accessories

Please check and identify the supplied accessories.

¸ AC power supply

cord . . . . . . . . . . . . . . . . . . 1

¸ Remote control . . . . . . . . 1 ¸ Batteries . . . . . . . . . . . . . . 2

for remote control

¸ Audio/Video cable . . . . . . 1

Note

The included AC power supply cord is for use with this unit only.

Be sure to use the included AC power supply cord with this unit.

Getting started

Before using this unit please read these operating instructions carefully. Take special care to follow the warnings indicated on the unit itself as

well as the safety suggestions listed below.

Afterwards keep them handy for future reference.

Do not place the unit

on amplifiers or equip-

ment that may become

hot.

The heat can damage the unit.

PRECAUTIONS

Placement

1. Ventilation—The unit should be situated so that its location or

position does not interfere with its proper ventilation. Allow

10 cm (4q) clearance from the rear of the unit.

2. Foreign Material—Care should be taken so that objects do not

fall into and liquids are not spilled into the unit. Do not subject

this unit to excessive smoke, dust, mechanical vibration, or

shock.

3. Carts and Stands—The unit should be used

only with a cart or stand that is recommended by

the manufacturer. The unit and cart combination

should be moved with care. Quick stops, exces-

sive force, and

uneven surfaces may cause the unit and cart combination to

overturn.

4. Mounting—Any mounting of the appliance should follow the

manufacturer’s instructions, and should use a mounting acces-

sory recommended by the manufacturer.

Maintenance

Disconnect this unit from the AC outlet before cleaning.

Clean the cabinet, panel and controls with a soft cloth lightly moist-

ened with a mild detergent solution.

Do not use any type of abrasive pad, scouring powder or solvent

such as alcohol or benzine.

The model number and serial number of this product can be

found on either the back or the bottom of the unit.

Please note them in the space provided below and keep for

future reference.

MODEL NUMBER! DVD-S1200

SERIAL NUMBER

Safety

1. Power Source—The unit should be connected to a power

supply only of the type described in the operating instructions or

as marked on the unit. If you are not sure of the type of power

supply to your home, consult your appliance dealer or local pow-

company.

2. Polarization—If the unit is equipped with a polarized AC power

plug (a plug having one blade wider than the other), that plug will

fit into the AC outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try reversing the

plug. If the plug should still fail to fit, contact your electrician to

replace your obsolete outlet. Do not defeat the safety purpose of

the polarized plug.

3. Power Cord Protection—AC power supply cords should be

routed so that they are not likely to be walked on or pinched by

items placed upon or against them. Never take hold of the plug

or cord if your hand is wet, and always grasp the plug body when

connecting or disconnecting it.

4. Overloading—Do not overload wall outlets and extension cords

as this can result in a risk of fire or electric shock.

5. Nonuse Periods—When the unit is not being used, turn the

power off. When left unused for a long time, the unit should be

unplugged from the household AC outlet.

6. Attachments—Do not use attachments not recommended by

the unit manufacturer as they may cause hazards.

Installation

Environment

1. Water and Moisture—Do not use this unit near water—for

example, near a bathtub, washbowl, swimming pool, or the like.

Damp basements should also be avoided.

2. Condensation—Moisture may form on the lens in the following

conditions…

³immediately after a heater has been turned on.

³in a steamy or very humid room.

³when the unit is suddenly moved from a cold environment to a

warm one.

If moisture forms inside this unit, it may not operate properly. To

correct this problem, turn on the power and wait about one hour

for the moisture to evaporate.

3. Heat—The unit should be situated away from heat sources such

as radiators and the like. It also should not be placed in tempera-

tures less than 5 oC (41 oF) or greater than 35 oC (95 oF).

Getting started

º Discs that can be played

Video

system

NTSC

(and PAL,

but audio

only)

NTSC

—

Disc information

LogoDisc type

DVD-RAM

(4.7 GB)

DVD-

Audio

DVD-Video

Video CD

Audio CD

Indication

used in

instructions

[RAM]

[DVD-A]

[DVD-V]

[VCD]

[CD]

Region

number

—

º Region Management Information

(DVD-Video only)

This unit responds to the Region Management Information recorded

on DVD-Video. This unit’s region number is “1”. You cannot play the

disc if the region number on the DVD-Video does not correspond to

the region number on the unit.

You can play discs with labels containing the region number “1” and

“ALL”. Read the disc’s instructions carefully.

º Playing DVDs and Video CDs

The producer of the material can control how these discs are

played. This means that you may not be able to control play of a disc

with some operations described in these operating instructions.

Read the disc’s instructions carefully.

º DVD-RAM discs

DVD-RAM discs must meet the following conditions for this unit to

be able to play them. It may not be possible to play some discs due

to the condition of the recording.

ALL

³Structure of the disc (example)

³Starting play from a selected chapter

Press the numeric buttons and press [ENTER].

Example: Chapter 23: [2] ➡ [3] ➡ [ENTER]

(Pressing [S10] is unnecessary.)

³Repeat play

You can use chapter repeat or title repeat.

³Program play, random play

You cannot use program play or random play.

MP3 playback

You can use this unit to play MP3 format audio recorded for personal use with a computer etc. onto CD-R or CD-RW. Play may not be

possible in some cases due to the condition of the recording. Discs recorded using MP3 differ to CDs in the following ways.

³Display during play

³On-Screen Menu Icons for disc information during play

1 2 3 4 5 6 7 8 9

Title

(Album)

Title

(Album)

PGM

GROUP

TITLE

TRACK

CHAP

D.MIX P.PCM

MLT.CH

V.S.S.

RMTR

DVD

VIDEO

AUDIO

VCD

RNDA B

Type

Capacity

Recording format

4.7 GB TYPE 2 disc

Note

³Remove TYPE 2 discs from their cartridges before use. Read the

instructions for the disc carefully.

³Do not allow the disc to become dirty or scratched.

³Store discs in their cartridges. Be sure the label of the disc and the

cartridge both face up when replacing the disc.

For your reference

Some parts of the disc, for example where one program ends and

another begins, may not play smoothly.

Current chapter

Chapter (Track)

1/ 59

0 : 01

Note

³Not compatible with multi-session recordings

If you record MP3 onto CD-R/CD-RW over a number of sessions, this unit can play only the recordings made in the first session.

³Recordings will not necessarily be played in the order you recorded them. The recordings will be reordered according to their titles:

numbers in numerical order first, upper case in alphabetical order next, and lower case in alphabetical order last.

³If you play an MP3 track that includes still picture data, it will take some time before the music itself starts playing and the elapsed time

will not be displayed during this time. Even after the track starts, the correct play time will not be displayed.

º Discs that cannot be played

PAL discs (the audio on DVD-Audio can be played), DVD-RAM

(2.6 GB, TYPE 1), DVD-ROM, DVD-R (some DVD-R can be

played), CD-ROM, CDV, CD-G, iRW, DVD-RW, CVD, SVCD,

SACD, Divx Video Discs and Photo CD.

º DVDs that can be played

This unit has a Dolby Digital decoder so you can play

DVDs with this mark.

This unit has a DTS decoder so you can play DVDs

with this mark.

Non-cartridge 4.7 GB

Total number of chapters

Elapsed play time

(display only, cannot be changed)

Non-cartridge discs

Discs that can be removed from their

cartridges (TYPE 2)

12 cm 4.7 GB and 8 cm 2.8 GB

Discs recorded with DVD video

recorders, DVD video cameras,

personal computers, etc., using Version

1.1 of the Video Recording Format (a

unified video recording standard).

Getting started

30°30°

The remote control

Batteries

³Insert so the poles (i and j) match those in the remote control.

³Do not use rechargeable type batteries.

Do not;

³mix old and new batteries.

³use different types at the same time.

³heat or expose to flame.

³take apart or short circuit.

³attempt to recharge alkaline or manganese batteries.

³use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can

damage items the fluid contacts and may cause a fire.

If electrolyte leaks from the batteries, consult your dealer.

Wash thoroughly with water if electrolyte comes in contact with any

part of your body.

Remove if the remote control is not going to be used for a long peri-

od of time. Store in a cool, dark place.

Replace if the unit does not respond to the remote control even

when held close to the front panel.

Use

Aim at the sensor, avoiding obstacles, at a maximum range of

7 m (23 feet) directly in front of the unit.

³Keep the transmission window and the unit’s sensor free from

dust.

³Operation can be affected by strong light sources, such as direct

sunlight, and the glass doors on cabinets.

Do not;

³put heavy objects on the remote control.

³take the remote control apart.

³spill liquids onto the remote control.

Remote control signal sensor

7 m (23 feet)

Disc handling

Do not use irregularly shaped discs, such as heart-shaped.

(These can damage the unit.)

R6, AA

º How to hold a disc

Do not touch the recorded surface.

º If the surface is dirty

DVD-Audio, DVD-Video, Video CD, CD

Wipe it with a damp cloth and then wipe dry.

Do not wipe with a circular motion; wipe straight outward from the

center.

DVD-RAM

³Clean DVD-RAM only with the DVD-RAM/PD disc cleaner availa-

ble as an optional accessory.

³Never use cloths or cleaners for CDs, etc.

º Condensation

Moisture may condense on discs after being brought inside from the

cold.

If the disc is a DVD-RAM, use the DVD-RAM/PD disc cleaner avail-

able as an optional accessory to wipe it dry.

With other discs, wipe with a soft, dry, lint-free cloth.

º Handling precautions

³Do not write on the label side with a ball-point pen or other writing

instrument.

³Do not use record cleaning sprays, benzine, thinner, static electric-

ity prevention liquids or any other solvent.

³Do not attach labels or stickers to discs. (Do not use discs with

exposed adhesive from tape or left over peeled-off stickers.)

³Do not use scratch-proof protectors or covers.

³Do not use discs printed with label printers available on the

market.

º Do not place or store discs in the following

places

³Locations exposed to direct sunlight

³Humid or dusty locations

³Locations directly exposed to a heat vent or heating appliance

Getting started

1234

5678

CANCEL

OPEN/CLOSE

POWER

MARKER

PAG EGROUP

ENTER

VIDEO OFF

PLAY MODE

SKIP

SLOW

SUBTITLE

PLAYPAU SESTOP

DVD

V756260

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

SET UP

Í/I

AUDIO

VIDEO

TEXT

PLAY LIST

DIRECT NAVI

NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200

PROGRESSIVE ON

VIDEO OFF

GROUP

LEVEL

010

PHONES

STANDBY

/ON

AUDIO

VIDEO

PROGRESSIVE ON

VIDEO OFF

GROUP

STANDBY

/ON

AUDIO

VIDEO

1 3 4 5 6

789:;<

>=?@

Main unit

Page

1 Standby indicator (STANDBY)

When the unit is connected to the household AC outlet, this indi-

cator lights up in standby mode and goes out when the unit is

turned on.

2 PROGRESSIVE ON indicator (PROGRESSIVE ON) . . . . . 15

3 VIDEO OFF indicator (VIDEO OFF) . . . . . . . . . . . . . . . . . . . 15

4 Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5 GROUP button (GROUP) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

6 Skip/Search buttons (,,-) . . . . . . . . . . . . . 14

7 Stop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

8 Pause button (;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

9 Play button (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

: Disc tray open/close button (<) . . . . . . . . . . . . . . . . . . . . . 12

; Display

< VIDEO OFF button (VIDEO OFF) . . . . . . . . . . . . . . . . . . . . . 15

= Headphone level control (LEVEL) . . . . . . . . . . . . . . . . . . . . 22

> PROGRESSIVE ON button (PROGRESSIVE ON) . . . . . . . 15

? Headphone jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

@ Standby/on switch (STANDBY/ON) . . . . . . . . . . . . . . . . . . . 12

Press to switch the unit from on to standby mode or vice versa.

In standby mode, the unit is still consuming a small amount of

power.

Buttons such as # function the same

as the controls on the unit.

Control reference guide

Remote control

Page

A Numeric buttons (1–9, 0, S10) . . . . . . . . . . . . . . . . . . . . . . 13

B Set up button (SET UP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

C Top menu and Direct Navigator button

(TOP MENU, DIRECT NAVI) . . . . . . . . . . . . . . . . . . . . . . 13, 19

D Cursor buttons (3, 4, 2, 1)/Enter button (ENTER) . . . . 13

E On screen button (ON SCREEN) . . . . . . . . . . . . . . . . . . . . . 24

F Play mode button (PLAY MODE) . . . . . . . . . . . . . . . . . . . . . 17

G Subtitle button (SUBTITLE) . . . . . . . . . . . . . . . . . . . . . . . . . 23

H Repeat mode button (REPEAT) . . . . . . . . . . . . . . . . . . . . . . 21

I A-B repeat button (A-B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

J Skip buttons (:, 9SKIP) . . . . . . . . . . . . . . . . . . . . . . . 14

K Cancel button (CANCEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

L Marker button (MARKER) . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

M Page button (PAGE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

N Text button (TEXT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

O Menu and Play List button (MENU, PLAY LIST) . . . . . 13, 20

P Return button (RETURN) . . . . . . . . . . . . . . . . . . . . . . . . 24, 28

Q Angle button (ANGLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

R Audio button (AUDIO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

S Headphone and Speaker V.S.S. buttons

(HP-V.S.S./SP-V.S.S.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

T Slow/Search buttons (6, 5SLOW/SEARCH) . . . . . . . 14

Getting started

As this unit has built-in Dolby Digital and DTS decoders (➡ page 34), you can enjoy discs recorded with these systems by connecting this unit to

the 6-channel input terminals on an AV amplifier (connection [B] below). However, to enjoy the special sound effects available with AV amplifiers

that can make you feel like you were in a cinema or hall, connect this unit digitally to the AV amplifier (connection [A] below).

Use analog connection [B] to enjoy the high quality audio (sampling frequencies of 192 kHz and 96 kHz) and multi-channel audio found

on DVD-Audio. If the disc is copyright-protected, the audio can only be output through the digital output terminal if it is converted to 48

kHz.

What you want to do

º Other uses

Recording to MDs or cassette tapes (➡ page 11).

Note

³The equipment connections described are examples.

³Peripheral equipment and optional cables sold separately unless otherwise indicated.

³Before connection, turn off all equipment and read the appropriate operating instructions.

To enjoy 5.1-channel surround

sound

To enjoy stereo

10 [B]

Settings

Reference

page

Speaker Setting

Select “Multi-channel”.

[Digital\connection]

Connect to an amplifier with

built-in decoder or a separate

decoder-amplifier combination.

9 [A] Digital Audio Output

Select “On”.

PCM Down Conversion

Dolby Digital

DTS Digital Surround

Change the settings to suit

the equipment you connect.

Make the speaker settings on

the amplifier or decoder.

—

[Analog\connection]

Connect to an amplifier or

system component with analog

input terminals.

10 [D]

9 [C][Digital\connection]

Connect to an amplifier with a

digital input terminal.

Digital Audio Output

Select “On”.

PCM Down Conversion

Change the settings to suit

the equipment you connect.

Dolby Digital and DTS

Digital Surround

Select “PCM”.

Reference

page

How to do it

Connection

Manufactured under license from Digital Theater Systems,

Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762

and other world-wide patents issued and pending. “DTS” and

“DTS Digital Surround” are registered trademarks of Digital

Theater Systems, Inc. + 1996, 2000 Digital Theater Sys-

[Analog\connection]

Connect to an amplifier with

5.1-channel audio input

terminals.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic” and the double-D symbol are trademarks

of Dolby Laboratories. Confidential unpublished works.

Getting started

Before connection

³Disconnect the AC power supply cord.

³Refer to the amplifier’s operating instructions.

STANDBY

/ON

NATURAL SOUND AV RECEIVER RX–V3000

INPUT MODE

INPUT

VOLUME

SILENT

PHONES

SPEAKERS

PROCESSOR

DIRECT

BASS

EXTENSION

BASS TREBLE REC OUT/ZONE 2

VIDEO AUX

VCR 1

SAT

CABLE

D-TV/LD

DVD

SOURCE

/REMOTE

MD/TAPE

CD-R

TUNER

PHONO

VCR 2/DVR

EFFECT

6CH

INPUT

TUNING

MODE

MEMORY

S VIDEO VIDEO L R OPTICALAUDIO

MAN'L/AUTO FM AUTO/NAN'L MONO

FM/AM

PRESET

/TUNING

DSP

PROGRAM

EDIT

VIDEO AUX

AC IN

COMPONENT

VIDEO OUT

(480p / 480l)

MIXED 2CH

COAXIALOPTICAL

PCM / DIGITAL

DTS

AUDIO OUT

6CH DISCRETE

SURROUND MAINCENTER

SUBWOOFER

S VIDEO

VIDEO

VIDEO OUT

VIDEO

Connecting an AV amplifier with a built-in decoder

Speakers

You can enjoy surround sound by connecting from

three to six speakers.

Example: Six speakers

If you do not connect a subwoofer, it is advisable

to connect main speakers (L/R) capable of

producing bass of less than 100 Hz.

Do not connect the unit’s

video output through a vid-

eo cassette recorder

The video from this unit may

not be played correctly due to

copy-guards if you connect

a video cassette recorder

between the unit and your

television.

MONITOR OUT

terminal

Television

Video cable

AV amplifier

VIDEO INPUT

terminal

Audio/video

cable

To household

AC outlet

(AC 120V, 60 Hz)

Back of the unit

AC power

supply cord

(included)

Audio/video cable (included)

Yellow (VIDEO)

White (L)

Red (R)

Change PCM Down Conversion, Dolby Digital, and DTS

Digital Surround to suit the equipment (➡ pages 29

and 33).

Conserving power

This unit consumes a small amount of power, even when it is turned

off (approx. 2 W ). To save power when the unit is not to be used for

a long time, unplug it from the household AC outlet.

Note

You cannot use DTS Digital Surround decoders not suited to

DVD-Video.

Connection to digital audio

equipment without a decoder

You can still enjoy audio using the connections described above.

Make the following settings (➡ pages 29 and 33).

³Digital Audio Output ➡ On

³PCM Down Conversion ➡ Yes

³Dolby Digital and DTS Digital Surround ➡ PCM

Note when connecting the

optical digital audio cable

Remove the

dust cap

Align the plug with

the terminal

Note

Keep the dust cap and reattach

when not using the terminal.

DIGITAL

INPUT

(COAXIAL)

terminal

DIGITAL

INPUT (OPTICAL)

terminal

Optical

digital

audio cable

Do not bend

when

connecting.

Coaxial

cable

Getting started

STANDBY

/ON

NATURAL SOUND AV RECEIVER RX–V3000

INPUT MODE

INPUT

VOLUME

SILENT

PHONES

SPEAKERS

PROCESSOR

DIRECT

BASS

EXTENSION

BASS TREBLE REC OUT/ZONE 2

VIDEO AUX

VCR 1

SAT

CABLE

D-TV/LD

DVD

SOURCE

/REMOTE

MD/TAPE

CD-R

TUNER

PHONO

VCR 2/DVR

EFFECT

6CH

INPUT

TUNING

MODE

MEMORY

S VIDEO VIDEO L R OPTICALAUDIO

MAN'L/AUTO FM AUTO/NAN'L MONO

FM/AM

PRESET

/TUNING

DSP

PROGRAM

EDIT

VIDEO AUX

COMPONENT

VIDEO OUT

(480p / 480l)

MIXED 2CH

COAXIALOPTICAL

PCM / DIGITAL

DTS

AUDIO OUT

6CH DISCRETE

SURROUND MAINCENTER

SUBWOOFER

S VIDEO

VIDEO

VIDEO OUT

Connecting an AV amplifier with 5.1-channel audio input terminals

Be sure to switch the amplifier to ANALOG input.

Connection

³Speaker connections (➡ page 9)

³Television connections (➡ pages 9 and 11)

Change “Speaker setting” (➡ page 32).

Note

³Turn speaker and headphone V.S.S. (➡ page 22) off when you connect through the 6CH DISCRETE terminals. The unit does not output the

signals for channels other than the front speakers when V.S.S. is on.

Analog connection to a 2-channel amplifier or system component

To enjoy Dolby Pro Logic

³If you connect an amplifier that can decode Dolby Pro Logic, you will also need to connect center and surround speakers to enjoy

surround sound. Read the instructions for the equipment for connection details.

³Turn Virtual Surround off (➡ page 22). Dolby Pro Logic will not function correctly if Virtual Surround is on.

AC IN

COMPONENT

VIDEO OUT

(480p / 480l)

MIXED 2CH

COAXIALOPTICAL

PCM / DIGITAL

DTS

AUDIO OUT

6CH DISCRETE

SURROUND MAINCENTER

SUBWOOFER

S VIDEO

VIDEO

VIDEO OUT

AUX IN

VIDEO

AV amplifier

Back of the unit

2-channel amplifier or system component

Audio cable

Video cable

Television

Audio cable

6CH

INPUT

terminals

Getting started

STANDBY

/ON

NATURAL SOUND AV RECEIVER RX–V3000

INPUT MODE

INPUT

VOLUME

SILENT

PHONES

SPEAKERS

PROCESSOR

DIRECT

BASS

EXTENSION

BASS TREBLE REC OUT/ZONE 2

VIDEO AUX

VCR 1

SAT

CABLE

D-TV/LD

DVD

SOURCE

/REMOTE

MD/TAPE

CD-R

TUNER

PHONO

VCR 2/DVR

EFFECT

6CH

INPUT

TUNING

MODE

MEMORY

S VIDEO VIDEO L R OPTICALAUDIO

MAN'L/AUTO FM AUTO/NAN'L MONO

FM/AM

PRESET

/TUNING

DSP

PROGRAM

EDIT

VIDEO AUX

COMPONENT

VIDEO OUT

(480p / 480l)

MIXED 2CH

COAXIALOPTICAL

PCM / DIGITAL

DTS

AUDIO OUT

6CH DISCRETE

SURROUND MAINCENTER

SUBWOOFER

S VIDEO

VIDEO

VIDEO OUT

A B

Connections using the S video or component video terminals

Audio connections (➡ pages 9 and 10)

[A] S VIDEO OUT terminal

The S VIDEO terminal achieves a more vivid picture than the

VIDEO terminal by separating the chrominance (C) and luminance

(Y) signals. (Actual results depend on the television.)

[B] COMPONENT VIDEO OUT terminal

These terminals can be used for either interlace or progressive out-

put and provide a purer picture than the S VIDEO terminal.

Connection using these terminals outputs the color difference sig-

nals (P

B/PR) and luminance signal (Y) separately in order to achieve

high fidelity in reproducing colors.

³The description of the component video input terminals depends

on the television or monitor (e.g. Y/P

B/PR, Y/B-Y/R-Y, Y/CB/CR).

Connect to terminals of the same color.

³After making this connection, change the black level for a better

picture (➡ page 29, Video—Black Level Control).

To enjoy progressive video

1. Connect to the component video (480p) input terminals on

a television compatible with this unit’s copy guard system.

Video will not be displayed correctly if you connect to a

television that is incompatible with this unit’s copy guard

system.

2. Press [PROGRESSIVE ON] on the front panel so the

indicator lights (➡ page 15).

Recording to MDs or cassette tapes

To make a digital recording

1. Connect the recording equipment with an optical or coaxial digit-

al audio cable (➡ page 9 [A]).

2. When recording DVDs, make the following settings.

VIRTUAL SURROUND (V.S.S.): OFF (➡ page 22)

Digital Audio Output: On (➡ page 29)

PCM Down Conversion: Yes (➡ page 29)

Dolby Digital and DTS Digital Surround: PCM (➡ page 29)

Note

³With CDs, wait for the total play time to appear before turning on

your recording unit’s synchro recording feature. The beginning

may be cut off if you turn it on while “READING” is displayed.

³With DVDs, recording may be interrupted when a new chapter be-

gins. Use analog recording if this persists.

These phenomena occur because DVD players must first deter-

mine the audio format and sampling frequency before switching

digital output.

º Analog recording

You can record to an MD or cassette deck. Using analog connection

means sound will be unaffected by the copy guards found on DVDs.

To make an analog recording

Connect the recording equipment with an audio cable

(➡ page 10 [D]).

º Digital recording

You can record the digital signal directly onto an MD.

The signals on DVDs will be converted to 48 kHz/16 bit linear PCM.

Ensure the following conditions are met.

³There is no copy guard recorded on the disc.

³The recording equipment can handle a sampling frequency of

48 kHz/16 bit.

Back of the unitAV amplifier

S video cable

Television

Video cable

VIDEO

INPUT

terminal

MONITOR OUT

terminal

VIDEO, S VIDEO

or COMPONENT

VIDEO INPUT

terminal

Basic operations

Reading

Open

TITLE

CHAP

DVD

VIDEO

TITLE

DVD

VIDEO

CHAP

POWER

OPEN/CLOSE

PLAY

PAUSE

NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200

PROGRESSIVE ON

VIDEO OFF

GROUP

LEVEL

010

PHONES

STANDBY

/ON

AUDIO

VIDEO

PROGRESSIVE ON

GROUP

STANDBY

/ON

1234

5678

CANCEL

OPEN/CLOSE

POWER

MARKER

TEXTTEXTPAG EGROUP

ENTER

VIDEO OFF

PLAY MODE

SKIP

SLOW

SUBTITLE

DVD

V739700

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

PLAY LISTDIRECT NAVI

SET UP

AUDIO

VIDEO

PLAYPAUSESTOP

OPEN/CLOSE

POWER

STOP PLAYPAUSE

TEXT

∫

;

123

∫;PROGRESSIVE ON

Label must face upward.

(With double-sided discs,

load so the label for the side

you want to play is facing up.)

Unit’s display (e.g. DVD-Video is loaded)

Basic play

[RAM] [DVD-A] [DVD-V] [VCD] [CD]

Preparation

Turn on the television and select the appropriate video input on the

television to suit the connections for the player.

1 Press [ê/I, POWER] to turn on the

unit.

For progressive output

Press [PROGRESSIVE ON] so the indicator lights.

2 Press [OPEN/CLOSE] to open the disc

tray.

3 Place the disc on the disc tray.

Remove TYPE 2 discs from their cartridges before use.

4 Press [1] (PLAY).

The disc tray closes and play begins.

º To stop play

Press [º] (➡ page 13, Resume function).

º To pause play [A]

Press [;] during play.

Press [1] (PLAY) to restart play.

º Displaying the text information on discs

[DVD-A] [DVD-V] [CD]

Remote control only

You can display the disc title, artist name, and track titles on the

television if this information is recorded on the disc.

Press [TEXT].

The text display is turned on and off each time you press the button.

Some text information also scrolls across the unit’s display.

³The unit cannot display the text on some discs.

Note

³If “” appears on the television

The operation is prohibited by the unit or disc.

³The disc continues to rotate while the menu is displayed even after

you finish playing an item. Press [º] when you finish to preserve

the unit’s motor and your television screen.

³Volume may be lower when playing DVDs than when playing other

discs or during television broadcasts.

If you turn the volume up on the television or amplifier, ensure you

reduce the volume again before playing other sources so that a

sudden increase in output does not occur.

º Auto standby

The unit switches to the standby mode after about 30 minutes in the

stop mode.

Playing CD-R and CD-RW

This unit can play CD-DA (digital audio) and Video CD format

audio CD-R and CD-RW that have been finalized

upon com-

pletion of recording.

It may not be able to play some CD-R or CD-RW due to the

condition of the recording.

Finalizing is a process that enables CD-R/CD-RW players to

play audio CD-R and CD-RW.

Basic operations

Basic play

When a menu screen appears on the

television

[DVD-A] [DVD-V] [VCD]

Remote control only

Press the numeric buttons to select an

item.

To select a 2-digit number

Example: To select item 23, press [S10] ➡ [2] ➡ [3].

³When playing DVDs, you can also use the cursor buttons

[3, 4, 2, 1] to select items. Press [ENTER] to confirm your

selection.

Play of the selected item now begins.

Other buttons used to operate menus

Read the disc’s instructions for further details about operation.

[9] or [-]: Shows the next menu.

[:] or [,]: Shows the previous menu.

[RETURN]: Shows the menu screen. [VCD]

[TOP MENU]: Shows the first menu screen. [DVD-A] [DVD-V]

[MENU]: Shows the menu screen. [DVD-V]

]A\ DVD menus

DVD-Video can have several menus. The menu displayed when you

press [TOP MENU] may be different from the menu displayed when

you press [MENU].

Resume function

[RAM] [DVD-A] [DVD-V] [VCD] [CD]

The position you stopped play at is recorded by the unit when “!” is

flashing on the unit’s display.

While “!” is flashing on the unit’s display, press [1] (PLAY) to start

play from where you stopped it.

If you are playing DVD-Video, the illustrated message also appears.

Press [1] (PLAY) while the message is displayed and the beginning

portions of each chapter up to the current one are played. Full play

resumes from the point where you stopped play.

(This feature works only within a title.)

If you do not press [1] (PLAY), the message disappears and play

starts from where you stopped it.

To cancel

Press [º] until “!” disappears from the unit’s display.

Note

³The resume function does not work if the disc’s play time is not

displayed.

³The position is cleared when the disc tray is opened.

³The unit saves the position even when you switch the unit to stand-

by except when playing a play list (➡ page 20).

Starting play from a selected

program, title, or track

[RAM] [DVD-A] [DVD-V] [VCD] [CD]

Remote control only

Press the numeric buttons to select the

item.

To select a 2-digit number

Example: To select track 23, press [S10] ➡ [2] ➡ [3].

Play starts from the selected item.

Note

³This works only when stopped with some discs.

³This may not work with some discs.

³When playing DVD-Audio and you want to start play from a track in

a different group, select the group first (➡ page 15).

Press PLAY to Chapter Review

DVD

VIDEO

TRACK

VCD

TOP MENU

NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200

PROGRESSIVE ON

VIDEO OFF

GROUP

LEVEL

010

PHONES

STANDBY

/ON

AUDIO

VIDEO

1234

5678

CANCEL

OPEN/CLOSE

POWER

MARKER

TEXTPAG EGROUP

ENTER

VIDEO OFF

PLAY MODE

SKIP

SLOW

SUBTITLE

DVD

V739700

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

PLAY LISTDIRECT NAVI

SET UP

AUDIO

VIDEO

PLAYPAUSESTOP

PLAY LIST

1 2 3 4

5 6 7 8

9 0

STOP PLAY

SKIP

RETURN

TOP MENU

DIRECT NAVI

∫1

∫

RETURN

TOP MENU

:, 9

ENTER

Title Title Title

MenuMenu

The disc’s

top menu

Numeric

buttons

e.g. Video CD

Cursor buttons/

ENTER

Basic operations

[

][

]

[

/6][5/

]

SKIP

SLOW

NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200

PROGRESSIVE ON

VIDEO OFF

GROUP

LEVEL

010

PHONES

STANDBY

/ON

AUDIO

VIDEO

;

MARKER

TEXTPAG EGROUP

ENTER

VIDEO OFF

PLAY MODE

SKIP

SLOW

SUBTITLE

DVD

V739700

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

PLAY LISTDIRECT NAVI

SET UP

PLAYPAUSESTOP PLAY

SLOW

PAUSE

SKIP

6, 5

:, 9

;

Basic play

Skipping

[RAM] [DVD-A] [DVD-V] [VCD] [CD]

You can skip chapters on DVD-Video, tracks on DVD-Audio, CDs,

and Video CDs, and on DVD-RAM you can skip to the start of a

program, scene in a play list, or to a marker.

During play or while paused

Press [:] or [9].

³Each press increases the number of skips.

³Press ["] or [#] on the main unit.

Frame-by-frame viewing

[RAM] [DVD-A] [DVD-V] [VCD]

Remote control only

While paused

Press the cursor buttons [2] or [1].

The frame changes each time you press the cursor buttons.

³The frames change in succession if you press and hold the button.

³Pressing [;] also activates forward frame-by-frame.

Fast forward and rewind—SEARCH

[RAM] [DVD-A] [DVD-V] [VCD] [CD]

During play

Press [6] or [5].

Press and hold ["] or [#] on the main unit.

For your reference

Audio will be heard during search for most discs. You can turn this

audio off if you want to (➡ page 29, Audio—Audio during Search).

Slow-motion play

[RAM] [DVD-A] [DVD-V] [VCD]

While paused

Press [6] or [5].

Press and hold ["] or [#] on the main unit.

Notes

³The speed of search and slow-motion increases up to

5 steps.

³Press [1] (PLAY) to restart play.

³You cannot move backwards with Video CD during frame-

by-frame and slow-motion.

³Frame-by-frame and slow motion only work on the moving

picture parts of DVD-Audio.

³[,], [2] or [6]: Backward

[-], [1] or [5]: Forward

When playing Video CDs with playback control

Pressing buttons to perform skipping, search, or slow-motion

may take you to a menu screen.

twice once

Chapter/Track Chapter/Track Chapter/Track

once

twice

Play position

Cursor buttons

Program Program Program

twice once

once

twice three times

Play position

Marker

[RAM]

[DVD-A] [DVD-V] [VCD] [CD]

Basic operations

PAGE 1

PAG E

GROUP

VIDEO OFF

GROUP

NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200

PROGRESSIVE ON

VIDEO OFF

GROUP

LEVEL

010

PHONES

STANDBY

/ON

AUDIO

VIDEO

VIDEO OFF

GROUP

PROGRESSIVE ON

1234

5678

CANCEL

OPEN/CLOSE

POWER

MARKER

TEXTPAG EGROUP

ENTER

VIDEO OFF

PLAY MODE

SKIP

SLOW

SUBTITLE

DVD

V739700

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

PLAY LISTDIRECT NAVI

SET UP

AUDIO

VIDEO

PLAYPAUSESTOP

1 2 3 4

5 6 7 8

9 0

CANCEL

PAG EGROUP

ENTER

VIDEO OFF

PLAY

GROUPVIDEO OFF

PROGRESSIVE ON

CANCEL

PAGE

VIDEO OFF

2·3

Basic play

Selecting still pictures—Page Skip

[DVD-A]

Remote control only

During play

Press [PAGE].

The page changes each time you press the button.

Selecting groups to play

[DVD-A]

The tracks on DVD-Audio are divided into groups. How these

groups are played differs with the disc so read the instructions that

came with the disc for further details.

1 Press [GROUP].

The group and track icons are displayed.

2 Press the cursor buttons [3, 4] to

select the group number and press

[ENTER].

3 Press the cursor buttons [3, 4] to

select the track number and press

[ENTER].

The selected group and track begin to play.

³You can also select groups with the remote control’s numeric but-

tons or [GROUP] on the main unit. Press [1] (play) to start playing

the selected group.

³Selection may not be allowed in some situations.

Playing all the groups in succession (➡ page 17)

Playing bonus groups

Some discs contain bonus groups. To enjoy these groups you may

have to enter a password. Refer to the disc’s jacket.

1. While stopped press [GROUP].

2. Press the cursor buttons [3, 4] to select the bonus group and

press [ENTER] or [1] (PLAY).

3. Enter the 4-digit password with the remote control’s numeric

buttons and press [ENTER].

4. Press the cursor buttons [3, 4] to select a track and press

[ENTER] to start play.

³Some discs will show a menu screen for you to enter your pass-

word. Follow the instructions on the screen.

³The bonus group can be played as many times as you like after the

password has been entered until the disc is removed from the unit.

Note

If you enter the wrong password, the previous screen will be

displayed. Start again from the beginning. You can erase it by

pressing [CANCEL].

To enjoy even higher quality

sound—VIDEO OFF

[RAM] [DVD-A] [DVD-V] [VCD] [CD]

You can enjoy higher quality audio by stopping the video signal.

Press [VIDEO OFF].

³The light above the button on the main unit lights.

³VIDEO OFF is canceled if you press the button again or turn the

unit off. The light goes out.

Note

Video signals are output while the disc is stopped and when opera-

tions such as searching are performed. The television can appear

unusual while video signals are not being output.

To enjoy even higher quality

picture—PROGRESSIVE ON

[RAM] [DVD-A] [DVD-V] [VCD]

The component video output terminals (Y, P

B/CB, PR/CR) can output

progressive signals. You can obtain a sharp and smooth high-

quality picture with less flicker using a television that can receive

progressive signals. (➡ page 11)

Press [PROGRESSIVE ON].

³The PROGRESSIVE ON indicator lights.

³PROGRESSIVE ON is canceled if you press the button again. The

indicator goes out.

e.g. Page 1

Numeric

buttons

Advanced operations

Marking places to play

again—MARKER

Remote control only

You can mark specific points on a disc to return to later. This feature

only works if the elapsed playing time of the disc is shown on the

unit’s display.

[DVD-A] [DVD-V] [VCD] [CD]

 Press [MARKER].

The marker icon appears.

Press [MARKER] at the point you want

to mark.

To select another marker, press the cursor button [1].

You can mark up to 5 points.

[RAM]

You can mark up to 999 points.

1 Press [MARKER].

The marker icon appears and if the disc already has markers,

they are displayed.

2 Press the cursor button [1] to high-

light the first marker, then press

[MARKER] at the point you want to

mark.

To mark the eleventh point and beyond

Select the next group of 10 as follows.

1. Press the cursor button [2, 1] to highlight the marker pin icon.

2. Press the cursor button [3] to select “11–20”.

You can select the next group of 10 when the current group is full.

To clear the marker display

Press [RETURN].

To play from a marked position

Press the cursor button [2, 1] to select a marker number and press

[ENTER].

To clear a marker

Press the cursor button [2, 1] to select a marker number and press

[CANCEL].

³You can clear existing markers, but they are restored when you

open the disc tray or switch the unit to standby.

Note

³All the markers added with this unit are cleared when the unit is

switched to standby or the disc tray is opened.

[RAM]

³This feature doesn’t work while using a play list.

³The markers are ordered by time. This means that the marker

numbers can change when you add and erase markers.

✱ ✱✱✱✱

1 ✱✱✱✱

1–10

✱ ✱✱✱✱✱✱✱✱✱

1–10

1 ✱✱✱✱✱✱✱✱✱

1–10

✱✱✱✱✱✱✱✱✱✱

MARKER

1234

5678

CANCEL

OPEN/CLOSE

POWER

MARKER

TEXTPAG EGROUP

ENTER

VIDEO OFF

PLAY MODE

SKIP

SLOW

SUBTITLE

DVD

V739700

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

PLAY LISTDIRECT NAVI

SET UP

AUDIO

VIDEO

PLAYPAUSESTOP

RETURN

CANCEL

MARKER

ENTER

RETURN

1·2

CANCEL

1–10

123456789

11–20

✱✱✱✱✱✱✱✱✱✱

Marker pin icon

Advanced operations

DVD

AUDIO

RND

DVD

AUDIO

RND

Press PLAY to start

All Group Playback

Choose a group or groups

Random Playback

0 Press PLAY to start

RETURN

SELECT

ENTER

ALL 1 2 3

Choose a group or groups

All 1 2 3

Random Playback

0 Press PLAY to start

RETURN

SELECT

ENTER

1234

5678

CANCEL

OPEN/CLOSE

POWER

MARKER

PAG EGROUP

ENTERENTER

VIDEO OFF

PLAY MODE

SKIP

SLOW

SUBTITLE

PLAYPAUSESTOP

DVD

V756260

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

SET UP

Í/I

AUDIO

VIDEO

PLAY

PLAY MODE

PLAY

ENTER

CANCEL

1·1

2·3

Changing the play sequence

Remote control only

All group play

[DVD-A]

The unit plays the tracks in all the groups on a disc.

1 While stopped

Press [PLAY MODE] until the all group

play screen appears.

2 Press [1] (PLAY).

Random play

[DVD-A] [VCD] [CD]

The unit plays the tracks on a disc in random order.

 While stopped

Press [PLAY MODE] until the random

play screen appears.

[DVD-Audio\only]

Press the cursor buttons [2, 1] to se-

lect a group and press [ENTER].

³You can select more than one group.

³You can also select groups with the numeric buttons.

! Press [1] (PLAY).

Play now begins in random order.

To clear a group [DVD-A]

1. Press the cursor buttons [2, 1] to select the group you want to

clear.

2. Press [CANCEL] or [ENTER].

³Groups can also be erased by entering the group number with the

numeric buttons.

To exit random mode

Press [PLAY MODE] while stopped until the random play screen

disappears.

Note

If you select bonus groups on DVD-Audio during random play, you

will have to enter a 4-digit password (➡ page 15).

e.g. DVD-Audio (three groups)

Numeric

buttons

Advanced operations

3·4

PLAY MODE

ENTER

RETURN

∫ 1

Choose a group and track, then press ENTER.

No Time

Total Time

0 Press PLAY to start

Play

Clear

Clear all

0:00

PLAY MODE

RETURN

∫ 1

Choose a group and track, then press ENTER.

Time

Total Time

0 Press PLAY to start

Play

Clear

Clear all

2:02

PLAY MODE

RETURN

6 ∫ 1

Choose a group and track, then press ENTER.

Time

Total Time

0 Press PLAY to start

Play

Clear

Clear all

PGM

GROUP

TRACK

DVD

AUDIO

PGM

GROUP

TRACK

DVD

AUDIO

SELECT

ENTER

0:00

SELECT

ENTER

PLAY MODE

ENTER

PLAY

1234

5678

CANCEL

OPEN/CLOSE

POWER

MARKER

TEXTPAG EGROUP

ENTER

VIDEO OFF

PLAY MODE

SKIP

SLOW

SUBTITLE

DVD

V739700

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

PLAY LISTDIRECT NAVI

SET UP

AUDIO

VIDEO

PLAYPAUSESTOP

1 2 3 4

5 6 7 8

9 0

CANCEL

ENTER

PLAY

SLOW

PLAY MODE

CANCEL

6, 5

2·3·4

Changing the play sequence

[DVD-A] [VCD] [CD]

Remote control only

Program play

You can select up to 32 tracks to play in the order you choose.

1 While stopped

Press [PLAY MODE] until the program

play screen appears.

2 Press [ENTER].

3 [DVD-Audio\only]

Press the cursor buttons [3, 4] to se-

lect a group and press [ENTER].

4 Press the cursor buttons [3, 4] to se-

lect a track and press [ENTER].

Each time you press the cursor button,

1()2<- - - - - - ->ALL

^---------------------------------------J

³Repeat steps 2, 3 and 4 to program other tracks.

³You can also select a group or track with the numeric but-

tons.

³“Total Time” tells you the total time of the programmed

tracks.

³All the tracks on a disc are selected when you select “ALL”

(all the tracks in the selected group with DVD-Audio).

5 Press [1] (PLAY).

Play now begins in the programmed sequence.

To add or change tracks

1. Press the cursor buttons [3, 4] to select an available item.

2. Repeat steps 2–4 to make the changes.

To move to the page before or after the one shown

Press [6] or [5].

To clear the programmed tracks one by one

Press the cursor buttons [3, 4] to select the item number (No) and

press [CANCEL]. Alternatively, press the cursor buttons [3, 4, 2,

1] to select “Clear” and press [ENTER].

To clear the whole program

Press the cursor buttons [3, 4, 2, 1] to select “Clear all” and

press

[ENTER].

The whole program is also cleared when the unit is turned off, or the

disc tray is opened.

To exit the program mode

Press [PLAY MODE] while stopped until the program play screen

disappears.

³The program is retained in memory.

Note

If you select bonus groups on DVD-Audio during program play, you

will have to enter a 4-digit password (➡ page 15).

Track No.

Program No.

e.g. DVD-Audio

Group No.

Numeric

buttons

Advanced operations

DIRECT NAVIGATOR

No DATE CH

Program Title

Contents

12/23(SAT)

12/26(TUE)

1/12(FRI)

1/24(WED)

2/20(TUE)

21:02

14:35

20:00

19:30

19:05

Saturday feature

Auto action

Sunday Cinema

Music

Baseball

SELECT

ENTER

RETURN

DIRECT NAVIGATOR

DATE CH

Program Title

Contents

12/26(TUE)

1/12(FRI)

1/24(WED)

2/20(TUE)

14:35

20:00

19:30

19:05

Saturday feature

Auto action

Sunday Cinema

Music

Baseball

SELECT

ENTER

RETURN

12/23(SAT)

21:02

TOP MENU

PLAY

1234

5678

CANCEL

OPEN/CLOSE

POWER

MARKER

TEXTPAG EGROUP

ENTER

VIDEO OFF

PLAY MODE

SKIP

SLOW

SUBTITLE

DVD

V739700

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

PLAY LISTDIRECT NAVI

SET UP

AUDIO

VIDEO

PLAYPAUSESTOP

1 2 3 4

5 6 7 8

9 0

ENTER

TOP MENU

DIRECT NAVI

PLAY

2·3

DIRECT NAVI

Playing the programs on

DVD-RAM

[RAM]

Remote control only

Selecting programs to play—

DIRECT NAVIGATOR

When a program list is recorded on the disc, you can use it to find

programs you want to watch and start play.

1 Press [DIRECT NAVI].

The program list is displayed and the program currently

selected plays in the background.

2 Press the cursor buttons [3, 4] to

select the program you want to watch.

You can also select a program with the numeric buttons.

Step 3 is unnecessary.

To enter a 2-digit number

Example: 17, press, [S10] ➡ [1] ➡ [7].

3 Press [1] (PLAY) or [ENTER].

Play of the program that was playing in the background

continues.

To clear the program list

Press [DIRECT NAVI].

(The unit returns to the condition it was in before you called up the

program list.)

To display information about a selected program

1. Do steps 1 and 2 to select the program, then press the cursor

button [1] to select “Contents” on the right side of the list.

2. Press [ENTER].

The background picture pauses. Press [ENTER] to return to the pro-

gram list.

If there are 6 or more programs

Press the cursor button [4] while program 5 is highlighted.

The programs not currently shown are displayed each time you

press the cursor button.

For your reference

³Program and disc titles are displayed only if they have been

entered.

³You cannot change program and disc titles.

e.g. when program 2 has been selected.

Numeric

buttons

Advanced operations

PLAYLIST

Date Length

Title

Contents

Memory lane

Auto action

A weekend in Paris

Soccer

0:46:35

0:09:15

0:12:32

0:07:30

SELECT

ENTER

RETURN

10/17

10/24

11/29

12/22

World

Best Hit

PLAYLIST

SELECT

ENTER

RETURN

View

Scene List

Program contents

World

Best Hit

PLAYLIST

SELECT

ENTER

RETURN

1 10/17 0:46:35 028 Memory lane

456

789

1/004

0:00:19

World

Best Hit

PLAY LIST

ENTER

1234

5678

CANCEL

OPEN/CLOSE

POWER

MARKER

TEXTPAG EGROUP

ENTER

VIDEO OFF

PLAY MODE

SKIP

SLOW

SUBTITLE

DVD

V739700

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

PLAY LISTDIRECT NAVI

SET UP

PLAYPAUSESTOP

RETURN

PLAY LIST

1 2 3 4

5 6 7 8

9 0

ENTER

STOP

∫

2·3·4·5

RETURN

Playing the programs on DVD-RAM

[RAM]

Remote control only

Using the play list menu to play

specific scenes

Finding and playing particular scenes is simple if the disc has play

lists recorded on it.

1 Press [PLAY LIST].

The play list screen is displayed.

2 Press the cursor buttons [3, 4] to

select the play list you want to watch.

³If you press [ENTER] or select a play list with the numeric

buttons, all the scenes in the play list are played from the

beginning.

3 Press the cursor button [1] to select

“Contents” on the right side of the list

and press [ENTER].

4 Press the cursor buttons [3, 4] to

select “Scene List” and press

[ENTER].

5 Press the cursor buttons [3, 4, 2,

1] to select the scene you want to

watch and press [ENTER].

The scene starts playing.

³You cannot move the highlighting to places where a scene

is not displayed.

³If there are more than 9 scenes in the play list, press the

cursor buttons [3, 4, 2, 1] to select “Next” and press

[ENTER]. You can move back to the previous page by se-

lecting “Prev”.

To display information about a selected play list

1. Do steps 1 and 2 to select the play list.

2. Press the cursor button [1] to select “Contents” on the right side

of the list and press [ENTER].

3. Press the cursor buttons [3, 4] to select “Program contents”

and press [ENTER].

When play finishes

³After playing a play list: the play list selection screen appears.

³After playing a scene: the scene selection screen appears.

To return to the previous screen

Press [RETURN].

To clear the play list screen

Press [PLAY LIST].

The unit returns to the condition it was in before you called up the

play list.

To stop play list play

Press [º] until the screens clear.

PLAYLIST

SELECT

ENTER

RETURN

Program contents

Memory lane

2000/10/17

(TUE)

028

Date

Length

:46:35

Scene

World

Best Hit

Numeric

buttons

Advanced operations

PGMRND

DVD VCD

A-B

V.S.S. BASS

VIDEO

✱

A B

OFF

PGMRND

DVD VCD

A-B

V.S.S. BASS

VIDEO

REPEAT

1234

5678

CANCEL

OPEN/CLOSE

POWER

MARKER

TEXTPAG EGROUP

ENTER

VIDEO OFF

PLAY MODE

SKIP

SLOW

SUBTITLE

DVD

V739700

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

PLAY LISTDIRECT NAVI

SET UP

AUDIO

VIDEO

PLAYPAUSESTOP

PLAY LIST

1 2 3 4

5 6 7 8

9 0

REPEAT

STOP PLAY

1·2

∫

REPEAT

Repeat play

[RAM] [DVD-A] [DVD-V] [VCD] [CD]

Remote control only

Repeat play

During play

Press [REPEAT].

The display changes as illustrated.

³DVD-RAM

Program (PG)>Entire disc (A)>OFF

^----------------------------------------------------------}

While playing a playlist

Scene (S)>Play list (PL)>OFF

^------------------------------------------------}

“PL” is not displayed while playing a specific play list scene.

³DVD-Audio

Track (T)>Whole group (G)>OFF

^------------------------------------------------------}

During All group, Program, or Random play modes, “A” is dis-

played instead of “G”.

³DVD-Video

Chapter (C)>Title (T)>OFF

^------------------------------------------}

³Video CD/CD

Track (T)>Entire disc (A)>OFF

^--------------------------------------------------}

If the Video CD has playback control

Cancel menu play first.

1. Press [º] during play until “PBC Play” is cleared from the unit’s

display.

2. Press the numeric buttons to select a track to start play.

3. Press [REPEAT] (➡ above).

To return to menu play, press [º] and press [MENU].

Note

³Repeat play may not work as desired with some DVDs.

³Repeat play does not work if the disc’s elapsed play time is not

shown on the unit’s display.

³You cannot use repeat play to repeat an entire DVD-Video or to

repeat all the play lists on a DVD-RAM.

º To repeat only your favorite tracks

[DVD-A] [VCD] [CD]

1. Program the tracks you want (➡ page 18).

2. Press [1] (PLAY). Play will start.

3. Press [REPEAT] to display “ T” or “ A”.

A-B repeat play

You can repeat a section between points A and B within a program,

title, or track.

1 During play

Press [A-B] at the starting point (A).

2 Press [A-B] at the finishing point (B).

To cancel

Press [A-B] until “” is displayed.

Note

³A-B repeat does not work if the DVD’s elapsed play time is not

shown on the unit’s display.

³Some subtitles recorded around point A or B may fail to appear.

³The unit automatically determines the end of a program/title/track

as point B when the end of the program/title/track is reached.

e.g. DVD-Video

Numeric

buttons

✱✱

Advanced operations

TITLE

CHAP SP

V.S.S.

DVD

VIDEO

HP-V.S.S. SP-V.S.S.

LEVEL

010

PHONES

LEVEL

010

PHONES

NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200

PROGRESSIVE ON

VIDEO OFF

GROUP

LEVEL

010

PHONES

STANDBY

/ON

AUDIO

VIDEO

1234

5678

CANCEL

OPEN/CLOSE

POWER

MARKER

TEXTPAG EGROUP

ENTER

VIDEO OFF

PLAY MODE

KIP

EAR

SUBTITLE

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

PLAY LISTDIRECT NAVI

SET UP

AUDIO

VIDEO

HP-V.S.S. SP-V.S.S.

LEVEL

HP.-V.S.S.

SP.-V.S.S.

Speaker Speaker

3 to 4 times distance

Seating position

Optimum seating position

Increasing your enjoyment of

movies and music

Enjoying virtual surround effects

with 2 speakers or headphones

(VIRTUAL SURROUND(V.S.S.))

[RAM] [DVD-V] [VCD]

SP-V.S.S.: Dolby Digital, DTS, MPEG, LPCM, 2-channel or over

only

HP-V.S.S.: Dolby Digital, MPEG, LPCM, 2-channel or over only

Remote control only

Use VIRTUAL SURROUND (V.S.S.) (Virtual Surround Sound) to en-

joy a surround-like effect if you are using two front speakers or

headphones.

If you are playing a disc with surround effects recorded on it, the

effect is broadened and sound seems to come from virtual speakers

on either side.

During play

Press [SP-V.S.S.] or [HP-V.S.S.].

Each time you press the button:

SP 1/HP 1: Natural effect>SP 2/HP 2: Emphasized effect

^--------=SP OFF/HP OFF: Cancel(--------b

Note

³Virtual Surround will not work, or will have less effect, with some

discs, even if you select “1” or “2”.

³Turn off the surround sound effects on the equipment you have

connected when using this effect.

³Turn Virtual Surround off if it causes distortion.

³Output from this unit will be in stereo (two channels) when V.S.S.

is on.

Using headphones

1 Set [LEVEL] to “0” and connect the

headphones (not included).

2 Adjust headphone volume with

[LEVEL].

Note

Avoid listening for prolonged periods of time to prevent hearing

damage.

<When using the

television’s

speakers>

Distance Al

Television’s width

Advanced operations

1234

5678

CANCEL

OPEN/CLOSE

POWER

MARKER

TEXTPAG EGROUP

ENTER

VIDEO OFF

PLAY MODE SUBTITLE

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

PLAY LISTDIRECT NAVI

SET UP

AUDIO

VIDEO

1 2 3 4

5 6 7 8

9 0

SUBTITLE

AUDIO ANGLE

ANGLE

AUDIO

SUBTITLE

I love you

Je t’aime

ENG

FRA

192k24b 2ch

LPCM

1 ENG 3/2.1 ch

Digital

TITLE

CHAP

DVD

VIDEO

D.MIX

MLT.CH

SUBTITLE

AUDIO

ANGLE

Changing soundtracks,

subtitle languages and

angles

Remote control only

Some DVDs have multiple soundtracks, subtitle languages and

camera angles, and you can change these during play.

Soundtracks

[RAM] [DVD-A] [DVD-V]

During play

Press [AUDIO].

The number changes each time you press the button.

³Play restarts from the beginning of the soundtrack when playing

DVD-Audio and DVD-RAM soundtracks that are accompanied by

still pictures.

³Even if a second soundtrack isn’t recorded on a DVD-Audio, two

soundtrack numbers will normally be shown when you press

[AUDIO]. The soundtrack currently playing is number 1.

³You can also use this button to turn the vocals on and off on kara-

oke discs. Read the disc’s instructions for details.

Subtitles

[RAM] [DVD-A] [DVD-V]

With DVD-Audio and DVD-Video you can change the subtitle lan-

guage and turn the subtitles on and off. With DVD-RAM you can turn

the subtitles on and off.

During play

Press [SUBTITLE].

The number changes each time you press the button.

To clear/display the subtitles

1. Press [SUBTITLE].

2. Press the cursor button [1]. (DVD-Audio and DVD-Video only)

3. Press the cursor button [3, 4] to select “ON” or “OFF”.

Angles

[DVD-A] [DVD-V]

During play

Press [ANGLE].

The number changes each time you press the button.

Notes regarding soundtracks, subtitle languages

and angles

³You can also press the cursor button [3, 4] or use the nu-

meric buttons to change the soundtracks, subtitle languag-

es and angles.

³Some discs allow changes to soundtracks, subtitle lan-

guages and angles only by using the disc’s menus.

³Soundtrack and subtitle languages can be set before play

(➡ page 29, Disc—Audio and Subtitle).

³“–” or “––” is displayed instead of the language number in

circumstances such as when no language is recorded on

the disc.

³Some discs allow you to set angles before multi-angle

scenes are played. Read the instructions that come with the

DVD.

³In some cases, the subtitle language is not changed to the

selected one immediately.

³If the subtitles overlap closed captions recorded on discs,

turn the subtitles off.

e.g. DVD-Video

Subtitle language number

Angle number

Indicates that a multi-

channel soundtrack

can be down-mixed.

Lights when a multi-

channel soundtrack is

playing.

DVD-Audio DVD-Video

Soundtrack playing

Soundtrack selected

DVD-Video

Numeric

buttons

Cursor

buttons

Advanced operations

100

- - - 1 2 3 ✱✱

OFF

- - - 1 2 3 ✱✱

OFF

1 : 46 : 50

1 ENG 3/2.1 ch

Digital

ENG

OFF BRIGHT

ON SCREEN

1234

5678

CANCEL

OPEN/CLOSE

POWER

MARKER

TEXTPAG EGROUP

ENTER

VIDEO OFF

PLAY MODE

SKIP

SLOW

SUBTITLE

DVD

V739700

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

PLAY LISTDIRECT NAVI

SET UP

AUDIO

VIDEO

PLAYPAUSESTOP

RETURN

1 2 3 4

5 6 7 8

9 0

ENTER

ON SCREEN

2·3·4

RETURN

OFF

SP OFF

Using On-Screen Menu Icons

[RAM] [DVD-A] [DVD-V] [VCD] [CD]

Remote control only

On-Screen Menu Icons are menus that contain information about

the disc or unit. These menus allow you to perform operations by

changing this information.

Common procedures

1 Press [ON SCREEN].

Each time you press the button:

[>Icons for disc information (=)

l>Icons for unit information (>)

l>Shuttle screen (?)

{=Original display (@)

³The screens depend on the disc contents.

2 [Icons\for\unit\information\only]

While the leftmost icon is highlighted

Press the cursor buttons [3, 4] to

select the menu.

Each time you press the button:

[>Play menu (A)

l;:

l>Display menu (B)

l;:

l>Audio menu (C)

l;:

{>Video menu (D)

3 Press the cursor buttons [2, 1] to

select the item.

4 Press the cursor buttons [3, 4] to

select the setting.

³Items with “3” or “4” above and below can be changed by

[3, 4].

³Press [ENTER] if the setting does not change after pressing

the cursor button [3, 4].

³Some items require different operations. Read the explana-

tions on the following pages.

For your reference

³Depending on the condition of the unit (playing, stopped, etc.) and

the type of disc you are playing, there are some items that you

cannot select or change.

³When numbers are displayed (e.g. title No.), the numeric buttons

are also effective for setting. When numbers are entered with the

numeric buttons, press [ENTER] to register the setting.

To clear the icons

Press [RETURN] until the menus disappear.

º To change the position of the icons

You can lower the position of the icons on the screen if they are cut

off for some reason. There are 5 positions to choose from.

1. Press the cursor buttons [2, 1] to select the rightmost icon.

2. Press the cursor buttons [3, 4] to move the icons.

Example: DVD-Video

Numeric

buttons

Advanced operations

Icon Content

[RAM]

Program number

[RAM]

Play list number

[DVD-A]

Group number

[DVD-V]

Title number

[DVD-A] [VCD] [CD]

Track number

[DVD-V]

Chapter number

[DVD-A] [DVD-V]

Time

[RAM]

Elapsed play time of the

program

Select a position to start play by

specifying a time with the numeric

buttons.

[DVD-A] [VCD] [CD]

Changing the time display

[>Track elapsed time

l:;

l>Track remaining time

l:;

{>Disc remaining time

[RAM] [VCD]

Audio mode

LR()L()R

^---------------------J

[DVD-A] [DVD-V]

Soundtrack language

(See [A] at rightfor language

abbreviations.)

[RAM] [DVD-A] [DVD-V]

Audio signal type

(See [B] at rightfor details.)

Icons for disc information

Icon

[A] Audio/Subtitle language

ENG: English

FRA: French

DEU: German

ITA: Italian

ESP: Spanish

NLD: Dutch

SVE: Swedish

NOR: Norwegian

DAN: Danish

POR: Portuguese

RUS: Russian

JPN: Japanese

CHI: Chinese

KOR: Korean

MAL: Malay

VIE: Vietnamese

THA: Thai

¢: Others

.1: Subwoofer signal

(not displayed if there is no subwoofer signal)

0: No rear

1: Mono rear

2: Stereo rear (left/right)

1: Center

2: Main leftiMain right

3: Main leftiMain rightiCenter

1 : 46 : 50

1 ENG 3/2.1 ch

Digital

1 ENG 3/2.1 ch

Digital

1 ✱

Vocal

OFF

ENG

L R

P B C

Content

[DVD-A] [DVD-V]

Karaoke vocal on/off

(Karaoke DVD only)

Solo: OFF or ON

Duet: OFF, V1iV2, V1 or V2

[DVD-A] [DVD-V]

Subtitle language

(See [A] belowfor language

abbreviations.)

[RAM] [DVD-A] [DVD-V]

Subtitles on/off

ON()OFF

[DVD-A] [DVD-V]

Angle number

[VCD] (with playback control only)

Menu play

Indicates whether menu play

(playback control) is on or off.

[DVD-A]

Still picture number

Selected picture is shown during

play

1 : 46 : 50

1 ENG 3/2.1 ch

Digital

ENG

Page

[B] Signal type/data

LPCM/PPCM/ëDigital/DTS/MPEG: Signal type

k (kHz): Sampling frequency

b (bit): Number of bits

ch (channel): Number of channels

Example:

3/2 .1ch

e.g. DVD-Video

Shuttle screen

100

Slow-motion play

E: Backward [RAM] [DVD-A] [DVD-V]

Slow-motion play

D: Forward [RAM] [DVD-A] [DVD-V] [VCD]

Pause

PlaySearch

6: Backward

5: Forward

Note

³There are five speeds for both backward and forward slow-motion and search.

³The numbers on either side of the shuttle screen indicate the maximum speeds of the search.

³Slow-motion only works on the moving picture parts of DVD-Audio.

Advanced operations

Using On-Screen Menu Icons

Icons for unit information

Play menu

Content

A-B repeat (➡ page 21)

[ENTER] (start point) ➡ [ENTER] (finish point)

To cancel

[ENTER]

Repeat play (➡ page 21)

[RAM]

PG (Program)()A (All)()OFF

^--------------------------------------------------J

During play list play

S (Scene)()PL (Play list)()OFF

^------------------------------------------------------J

[DVD-V]

C (Chapter)()T (Title)()OFF

^-------------------------------------------------J

[DVD-A] [VCD] [CD]

T (Track)()A (All)/G (Group)()OFF

^------------------------------------------------------------J

[DVD-A] [VCD] [CD]

Play mode display

---: Normal play

PGM: Program play

RND: Random play

ALL: All group play ([DVD-A])

Marker (➡ page 16)

[DVD-A] [DVD-V] [VCD] [CD]

You can mark up to 5 positions to play again.

[RAM]

You can mark up to 999 positions to play

again.

[ENTER] (The unit is now ready to accept

markers.)

To mark a position

[ENTER] (at the desired point)

To mark multiple positions

[1] ➡ [ENTER]

([RAM] ➡ page 16)

To recall a marker

[2, 1] ➡ [ENTER]

To erase a marker

[2, 1] ➡ [CANCEL]

Icon

[DVD-A]

[DVD-V] [VCD]

[CD]

[RAM]

––– 1 2 3 ✱✱

OFF

–––

1 2 3 ✱✱

Audio menu

Content

[RAM] [DVD-V] [VCD]

VIRTUAL SURROUND (V.S.S.) mode

(➡ page 22)

³SP-V.S.S.

(Dolby Digital, DTS, MPEG, LPCM,

2-channel or over only)

³HP-V.S.S.

(Dolby Digital, MPEG, LPCM, 2-channel or

over only)

V.S.S. level (➡ page 22)

SP 1/HP 1(-------------)SP 2/HP 2

^)SP OFF/HP OFF(J

[DVD-V]

(Dolby Digital/DTS, 3-channel or over only)

Dialogue Enhancer

ON()OFF

The volume of the dialogue from the center

channel is raised when you select “ON”.

Display menu

Icon Content

[RAM] [DVD-V] [VCD]

Bit-rate display

ON()OFF

Displays the bit rate and type of picture

(approximate values)

During play: Shows the average bit rate of

the video being played

While paused: Shows the type of the frame

and its data volume

Display dimmer

Changes the brightness of the unit’s display.

BRIGHT()DIM()AUTO

^----------------------------------J

The display dims and any indicators that were

on turn off during play. The display brightens

and the indicators light temporarily when you

perform an operation.

SP OFF

OFF

SP OFF

OFF

OFF BRIGHT

e.g. DVD-Video

Marker

BRIGHT

e.g. DVD-Video

Icon

Note

³The marker function does not work during play list play.

³“PL” is not displayed while playing a specific play list scene.

SP OFF

Advanced operations

Icons for unit information

Video menu

Icon ContentIcon Content

[RAM] [DVD-A] [DVD-V] [VCD]

Digital picture mode

To select the picture mode: [3, 4]

N: Normal mode

S: Soft mode

(Soft picture with fewer video artifacts)

F: Fine mode (Details are sharper)

C: Cinema mode (Picture for viewing movies)

U1/U2/U3

/U4

: User mode

These settings are only possible when the

PROGRESSIVE ON indicator is on

(➡ page 15).

³U4 settings are shown along with the N, S, F,

and C modes when the progressive output

indicator is on.

To change the user mode

1. Select User mode and press the cursor

button [1].

2. Press the cursor buttons [3, 4] to select

U1, U2, U3, or U4.

3. Press the cursor buttons [2, 1] to select

the item you want to change.

4. Press the cursor buttons [3, 4] to change

the setting.

0 0 0 0

Contrast (j7 to i7)

Increases the contrast between light

and dark parts of the picture.

Brightness (0 to i15)

Brightens the picture.

Sharpness (j6 to i6)

Adjust the horizontal resolution of the

picture.

Color (j7 to i7)

Adjust the shade of the picture’s color.

Gamma (0 to i5)

Increases the brightness of the center

ranges to improve detail and contrast in

dark scenes.

3D-NR (0 to i4)

Reduces overall noise.

Block NR (0 to i3)

Smoothes block noise.

Mosquito NR (0 to i3)

Reduces the smudging that appears

around contrasting sections of the

picture.

High sharpness (j6 to i6)

Finely adjusts the sharpness of the

picture horizontally.

V sharpness (j1 to i2)

Increases the sharpness of the picture

vertically.

Edge (j3 to 0)

Improves edges in the background to reduce

fuzziness and improve the sense of depth.

TINT (j15 to i15)

Change the overall tint of the picture.

Transfer MODE

Select the method of conversion for

progressive output to suit the type of

material being played (➡ page 34,

“Film and video”).

Auto 1 (normal):

for viewing film material

Auto 2:

for viewing film material (the same as

Auto 1, but able to convert 30-frame

per second progressive video)

Auto 3:

for animated material (also able to

convert 30-frame per second

progressive video)

Video: for video material

4:3 ASPECT

Select how to show video on a

widescreen (16:9) television that is

compatible with progressive output.

Nor. (normal): The picture fills the

whole screen.

Auto: Letterbox format 4:3 aspect

video expands to fill the screen

or is shown in the center of the

screen with black bands

either side.

Shr. (shrink): The picture is shown in

the 4:3 aspect in the

center of the television.

Zoom: Select if video with an aspect of

4:3 recorded in the letterbox

format is not expanded when

“Nor.” or “Auto” is selected.

Shift Position (0 to i15)

Shift the picture to show subtitles.

(Works when the picture fills the screen

when 4:3 ASPECT is set to “Auto” or

“Zoom”.)

Output

Change the tone of the picture.

Nor. (normal): normal output

Sepia: sepia toning

Mono (monochrome): black and white

Nega: brightness and tone are

reversed

Auto1

Nor.

e.g. U1

Note

The unit saves the settings you make with the user mode for each disc so when you play a disc again and select a user mode, the same settings

are selected. Discs you play for the first time use the previous settings. The unit can save settings for up to 200 discs. The settings for a disc are

not saved if you switch to normal, soft, fine, or cinema mode before opening the disc tray or switching the unit to standby.

Advanced operations

Changing settings

Remote control only

Change the settings to suit your preferences and to suit the unit to

the environment in which it is being used.

These settings are retained in memory until they are changed, even

if the unit is turned off.

Common procedures

See page 29 for menu and option details.

1 Press [SET UP] to show the menus.

The screen shows the disc settings menu (=) first.

2 Press the cursor buttons [2, 1] to se-

lect the menu’s tab.

The screen changes to display the menu.

[>Disc menu (=)

l>Video menu (>)

l>Audio menu (?)

l>Display menu (@)

{-)Others menu (A)

3 Press the cursor buttons [3, 4] to se-

lect the item you want to change and

press [ENTER].

4 Press the cursor buttons [3, 4] to se-

lect the option and press [ENTER].

The screen now shows the menu again.

To return to the previous screen

Press [RETURN].

When you are finished

Press [SET UP].

3·4

Display

Menu Language

On-Screen Messages

English

SET UP

SELECT

Disc

SET UP

SELECT

ENTER

RETURN

Audio

Subtitle

Menus

Ratings

English

Automatic

Level 8

Audio

PCM Down Conversion

Dolby Digital

DTS Digital Surround

D. Range Compression

Audio during Search

Bitstream

PCM

Off

Multi-channelSpeaker Setting

SET UP

SELECT

ENTER RETURN

Others

Demo

SET UP

SELECT

Off

On(RE-MASTER Off)

Digital Audio Output

ENTER

MARKER

TEXTPAG EGROUP

ENTER

VIDEO OFF

PLAY MODE

SKIP

SLOW

SUBTITLE

DVD

V739700

AUDIO ANGLE

REPEAT

HP-V.S.S. SP-V.S.S.

TOP MENU

ON SCREEN RETURN

PLAY LISTDIRECT NAVI

SET UP

PLAYPAUSESTOP

RETURN

ENTER

ON SCREEN

2·3·4

RETURN

SET UP

SELECT

Still Mode

Black Level Control

Automatic

Lighter

Video

TV Aspect

4:3 Pan&Scan

TV Type

Standard (Direct V...

Advanced operations

Summary of settings

This chart shows the settings for this unit. See page 28 for details on menu operation.

³Underlined items are the factory preset.

³The menu and on-screen message language has been factory preset to English. You can change the language by going to “Menu Language” in

the Display menu.

Options

English French Spanish

Original Other ¢¢¢¢

Automatic English French Spanish

Other ¢¢¢¢

English French Spanish Other

¢¢¢¢

Setting ratings (When level 8 is selected)

8 No Limit : All DVD-Video can be played.

1 to 7: Prohibits play of DVD-Video with

corresponding ratings recorded

on them.

0 Lock All: Prohibits play of all DVD-Video.

Changing ratings

(When level 0–7 is selected)

Unlock Player Change Level

Change Password Temporary Unlock

4:3 Pan&Scan 4:3 Letterbox 16:9

Standard (Direct View TV) CRT Projector

LCD Projector ProjectionTV

Automatic Field Frame

Lighter: when connected to a TV through the

VIDEO OUT or S VIDEO OUT

terminal.

Darker: when connected to a TV through the

COMPONENT VIDEO OUT

(Y/PB/PR) terminals.

Multi-channel:

when 3 or more speakers are connected.

³Speaker presence and size

³Delay time ³Channel balance

2-channel:

when 2 speakers or an amplifier with a Dolby

Pro Logic decoder is connected.

On: Digital signals are output.

Off: Digital signals are not output

(improves sound quality when using

analog connection)

No Yes

Bitstream PCM

PCM Bitstream

Off On

On Off

English Français Español

On Off

Off On

Items

Audio [DVD-A] [DVD-V]

Choose the preferred audio language.

Subtitle [DVD-A] [DVD-V]

Choose the preferred subtitle language.

Menus [DVD-A] [DVD-V]

Choose the preferred language for disc menus.

Ratings [DVD-V]

Set a ratings level to limit DVD-Video play.

³The password screen is shown if you choose levels 0 to 7 or if you

choose “ Ratings” when levels 0 to 7 have been selected

(➡ page 30).

³Select “Level 0” to prevent play of discs that do not have ratings levels

recorded on them.

TV Aspect

Choose the setting to suit your television and preference (➡ page 31).

TV Type

Change the setting to suit your television (

➡➡

➡

page 31).

Still Mode (➡ [Remarks] page 30)

Specify the type of picture shown when paused.

Black Level Control

Change the black level of the picture if you connected a television

through the COMPONENT VIDEO OUT terminals.

Speaker Setting [DVD-A] [DVD-V]

Choose the settings to suit your audio system and the listening

environment (➡ page 32).

Digital Audio Output

Select whether to output digital signals or not.

PCM Down Conversion [DVD-A] [DVD-V]

Select how to output the audio signals on discs that do not have copyright

protection (➡ page 33).

Dolby Digital [DVD-A] [DVD-V]

Digital output of Dolby Digital signals (➡ page 33).

DTS Digital Surround [DVD-A] [DVD-V]

Digital output of DTS Digital Surround signals (➡ page 33).

D. Range Compression [RAM] [DVD-A] [DVD-V] (Dolby Digital only)

Change the dynamic range for late night viewing.

Audio during Search [RAM] [DVD-A] [DVD-V] [VCD] (➡ [Remarks] page 30)

Choose whether to have sound during search.

Menu Language

Choose the preferred language for these menus and the on-screen messages.

On-Screen Messages

Choose whether to show on-screen messages or not.

Demo

A demonstration of the unit’s on-screen displays starts when you select “On”. The

demonstration stops when you press a button and the setting reverts to “Off”.

Menus

Disc

(➡ [Remarks]

page 30)

Video

Audio

Display

Others

Advanced operations

When changing ratings (When the level is 0 to 7)

The password screen is shown when you select “Ratings”.

1. Input your 4-digit password with the numeric buttons and press

[ENTER].

2. Select the item with the cursor buttons [3,4] and press [EN-

TER], and follow the on-screen instructions .

When setting ratings (When the level is 8)

The password screen is shown when you select levels 0 to 7.

1. Input a 4-digit password with the numeric buttons and press

[ENTER].

³If you enter a wrong number, press [CANCEL] to erase it before

you press [ENTER].

The lock symbol appears closed to show the rating is locked.

Do not forget your password.

2. Press [ENTER] to confirm the 4 digits.

Now, when you insert a DVD-Video that exceeds the ratings

limit you set, a message appears on the television.

Follow the on-screen instructions.

SET UP

ENTER RETURN

Enter a 4-digit password,

then press ENTER.

Ratings

✱✱✱✱

Password

SELECT

SET UP

SELECT

ENTER RETURN

Ratings

Unlock Player

Change Password

Change Level

Temporary Unlock

Changing settings

Summary of settings

Remarks

º Disc—Audio, Subtitle and Menus

Original: The original language of each disc will be selected.

Other ¢¢¢¢: Input a code number with the numeric buttons (➡ see below).

Automatic: If the language selected for “Audio” is not available, subtitles of that language will automatically appear if available on that disc.

³Some discs are designed to start in a certain language despite any changes you make here.

º Video—Still Mode

Automatic: The unit automatically selects field still or frame still.

Field: Less blurred field stills are shown. Select if jittering occurs when “Automatic” is selected.

Frame: Sharper frame stills are shown. Select if small text or fine patterns cannot be seen clearly when “Automatic” is selected.

º Audio—Audio during Search

Select “Off” if sound is interrupted when playing Dolby Digital 5.1-channel and DTS bitstream signals.

Audio will be heard when playing some DVD-Audio despite the settings you make here.

Entering a password

[DVD-V]

Refer also to Common procedures (➡ page 28) and the Disc section in Summary of settings (➡ page 29).

Language code list

Abkhazian: 6566

Afar: 6565

Afrikaans: 6570

Albanian: 8381

Ameharic: 6577

Arabic: 6582

Armenian: 7289

Assamese: 6583

Aymara: 6588

Azerbaijani: 6590

Bashkir: 6665

Basque: 6985

Bengali; Bangla: 6678

Bhutani: 6890

Bihari: 6672

Breton: 6682

Bulgarian: 6671

Burmese: 7789

Byelorussian: 6669

Cambodian: 7577

Catalan: 6765

Chinese: 9072

Corsican: 6779

Croatian: 7282

Czech: 6783

Danish: 6865

Dutch: 7876

English: 6978

Esperanto: 6979

Estonian: 6984

Faroese: 7079

Fiji: 7074

Finnish: 7073

French: 7082

Frisian: 7089

Galician: 7176

Georgian: 7565

German: 6869

Greek: 6976

Greenlandic: 7576

Guarani: 7178

Gujarati: 7185

Hausa: 7265

Hebrew: 7387

Hindi: 7273

Hungarian: 7285

Icelandic: 7383

Indonesian: 7378

Interlingua: 7365

Irish: 7165

Italian: 7384

Japanese: 7465

Javanese: 7487

Kannada: 7578

Kashmiri: 7583

Kazakh: 7575

Kirghiz: 7589

Korean: 7579

Kurdish: 7585

Laotian: 7679

Latin: 7665

Latvian, Lettish: 7686

Lingala: 7678

Lithuanian: 7684

Macedonian: 7775

Malagasy: 7771

Malay: 7783

Malayalam: 7776

Maltese: 7784

Maori: 7773

Marathi: 7782

Moldavian: 7779

Mongolian: 7778

Nauru: 7865

Nepali: 7869

Norwegian: 7879

Oriya: 7982

Pashto, Pushto: 8083

Persian: 7065

Polish: 8076

Portuguese: 8084

Punjabi: 8065

Quechua: 8185

Rhaeto-Romance: 8277

Telugu: 8469

Thai: 8472

Tibetan: 6679

Tigrinya: 8473

Tonga: 8479

Turkish: 8482

Turkmen: 8475

Twi: 8487

Ukrainian: 8575

Urdu: 8582

Uzbek: 8590

Vietnamese: 8673

Volapük: 8679

Welsh: 6789

Wolof: 8779

Xhosa: 8872

Yiddish: 7473

Yoruba: 8979

Zulu: 9085

Romanian: 8279

Russian: 8285

Samoan: 8377

Sanskrit: 8365

Scots Gaelic: 7168

Serbian: 8382

Serbo-Croatian: 8372

Shona: 8378

Sindhi: 8368

Singhalese: 8373

Slovak: 8375

Slovenian: 8376

Somali: 8379

Spanish: 6983

Sundanese: 8385

Swahili: 8387

Swedish: 8386

Tagalog: 8476

Tajik: 8471

Tamil: 8465

Tatar: 8484

Advanced operations

Changing settings

Television settings

Change the settings to suit your television and your preference.

Refer also to Common Procedures (➡ page 28) and the Video sec-

tion in Summary of settings (➡ page 29).

TV Aspect

4:3 Pan&Scan (Factory preset)

Select if you have a regular television and to view 16:9 software in

the pan and scan style.

16:9 software prohibited from being shown in the pan and scan style

will appear in the letterbox style despite the setting here.

4:3 Letterbox

Select if you have a regular television and to view 16:9 software

the letterbox style.

16:9

Select if you have a widescreen television.

For your reference

DVDs are recorded in a variety of aspect ratios and how these

appear depend on these settings, the on-screen menu settings, and

the television’s screen modes.

³When connected to a regular 4:3 aspect television, use these

settings.

³When connected to a widescreen 16:9 aspect television using

progressive output, use the on-screen menu icons (➡ page 27

“4:3 ASPECT”).

³When connected to a widescreen 16:9 aspect television using

interlace output, use the television’s screen modes.

TV Type

Standard (Direct View TV) (Factory preset)

Select if you have a standard television, widescreen television, wi-

descreen plasma television, etc.

CRT Projector

Select if you have a DLP Projector or a CRT Projector.

LCD Projector

Select if you have an LCD Projector.

Projection TV

Select if you have a Projection TV.

The optimum settings for your television may differ.

Advanced operations

SETUP

SELECT

ENTER RETURN

dBdB

Exit

Test

acaba

(L)

aca

(R) (R)

1234

5678

CANCEL

OPEN/CLOSE

POWER

MARKER

TEXTPAG EGROUP

ENTER

VIDEO OFF

PLAY MODE SUBTITLE

AUDIO ANGLE

TOP MENU

ON SCREEN RETURN

PLAY LISTDIRECT NAVI

SET UP

AUDIO

VIDEO

ENTER

Changing settings

Speaker setting

[DVD-A] [DVD-V]

Change speaker size and presence =, delay time >, and channel

balance ? to suit the speakers you have connected.

These settings are not necessary when you select “2-channel”

(only two speakers are connected).

Speaker presence and size (=)

1. Press the cursor buttons [3, 4, 2, 1] to select the item and

press [ENTER].

2. Press the cursor buttons [3, 4] to select the setting and

press [ENTER].

Icon examples: Rear speaker (L) [A]

Large: When the speaker supports low-frequency (under 100 Hz)

reproduction.

Small: Select when the speaker does not support low-frequency

reproduction.

The size setting for the main speakers is automatically determined

by the setting for the subwoofer.

Delay time (>)

[DVD-V] (Dolby Digital, center and rear speakers only)

For optimum listening with 5.1-channel sound, all the speakers, ex-

cept for the subwoofer, should be the same distance from the seat-

ing position. If you have to place the center or rear speakers closer

to the seating position, adjust the delay time to make up for the dif-

ference.

If distance @ (from the center speaker) and B (from the rear speak-

ers) are the same as or greater than A (from the main speakers),

leave the delay time as “0”, the factory preset.

If either distance @ or B is less than A, find the difference in the

relevant table and change to the recommended setting.

Changing the delay time

1. Press the cursor buttons [3, 4, 2, 1] to select the delay

time box and press [ENTER].

2. Press the cursor buttons [3, 4] to adjust the delay time and

press [ENTER].

Speaker balance (?)

1. Press the cursor buttons [3, 4, 2, 1] to select “Test” and

press [ENTER].

A test signal is output from one speaker at a time, starting with

the main left speaker and proceeding clockwise.

MAIN (L)>CENTER>MAIN (R)

REAR (L)(-----------==REAR (R)

2. While listening to the test signal, press the cursor buttons

[3, 4] to adjust the volume of the center and rear speakers

so they are the same apparent volume as the main speakers

(s6 dB to r6 dB).

(The main speakers cannot be adjusted here.)

3. Press [ENTER].

The test signal stops.

Note

³Test signal is effective only when you made analog connection.

When you make digital connection, make adjustment using the

test tone on the amplifier.

³No signal is output for the subwoofer. To adjust its volume, play

something, then return to this screen to adjust to suit your taste.

When you are finished

Press the cursor buttons [3, 4, 2, 1] to select “Exit” and press

[ENTER].

Note

The unit may be unable to output as set here due to limitations im-

posed by the unit itself or the disc being played. (The FL display’s

“P.PCM” indicator lights or “D.MIX” indicator goes out in these

cases.)

No Small

Difference

Approx. 200 cm (6 feet)

Approx. 400 cm (12 feet)

Approx. 600 cm (18 feet)

Setting

5.3 ms

10.6 ms

15.9 ms

Difference

Approx. 50 cm (1

/2 feet)

Approx. 100 cm (3 feet)

Approx. 150 cm (5 feet)

Approx. 200 cm (6 feet)

Setting

1.3 ms

2.6 ms

3.9 ms

5.3 ms

³Center speaker

³Rear speakers

Main (L)

Center

Main (R)

Test

signal

Exit

Rear

Subwoofer

Large

Cursor

buttons/ENTER

Advanced operations

Changing settings

[DVD-A] [DVD-V]

Digital output

Change these settings when you have connected equipment

through this unit’s DIGITAL AUDIO OUT terminals (OPTICAL or

COAXIAL).

Refer also to Common procedures (➡ page 28) and the Audio sec-

tion in Summary of settings (➡ page 29).

PCM Down Conversion

Select how to output the high-quality audio signals (sampling fre-

quencies of 96 kHz and 88.2 kHz) on discs that do not have copy-

right

protection. Choose the settings to suit the equipment you have con-

nected.

Setting

¤1

Yes

Equipment

(Able to handle

88.2 kHz or more)

Yes

Audio output

Output as is

Down-sampled to

48 kHz or 44.1 kHz

¤1

The equipment cannot output signals of 88.2 kHz or more if the

setting is “No” and the equipment is unable to handle these sig-

nals.

Note

Signals are down-sampled to either 48 kHz or 44.1 kHz despite the

above settings if they have a sampling frequency of 176.4 kHz or

more or are copyright protected.

Dolby Digital

Bitstream (Factory preset):

When you have connected a unit with a built-in Dolby Digital decod-

er.

PCM:

When you have connected a unit that doesn’t have a built-in Dolby

Digital decoder.

DTS Digital Surround

PCM (Factory preset):

When you have connected a unit that doesn’t have a built-in DTS

decoder.

Bitstream:

When you have connected a unit with a built-in DTS decoder.

These changes to digital audio output must be made, other-

wise bitstream signals the decoder cannot handle will be out-

put. If these signals are output, “noise” will be output which

can cause harm to your ears and speakers.

Reference

I/P/B

MPEG, the video compression standard adopted for use with

DVD-Video, codes frames using these 3 picture types.

I: Intra coded picture (I-picture)

This is the standard picture and is a complete picture in itself.

This means it has the best picture quality and is the best to

use when adjusting the picture.

P: Predictive coded picture (P-picture)

This picture is calculated based on past I or P-pictures.

B: Bidirectionally-predictive coded picture (B-picture)

This picture is calculated by comparing past and future I and

P-pictures so it has the lowest volume of information.

Linear PCM (pulse code modulation)

PCM is the usual digital method used for music CDs. DVDs have a

greater volume so they use linear PCM, which has a higher sam-

pling rate. Compressed PCM signals are called packed PCM

(PPCM).

Optical digital audio cable

This cable carries optical digital signals to the amplifier to reduce

noise caused by electronic interference.

Pan&Scan/Letterbox

In general, DVD-Video are produced with the intention that they be

viewed on a widescreen television with an aspect ratio of 16:9. This

means you can view most material with the intended aspect ratio on

a widescreen television.

Material with this ratio will not fit onto a standard television with an

aspect ratio of 4:3. Two styles of picture, “Pan&Scan” and “Letter-

box”, deal with this problem.

Pan&Scan: The sides are cut off so the picture fills the screen.

Letterbox: Black bands appear at the top and bottom of the picture

so the picture itself appears in an aspect ratio of 16:9.

Playback control (PBC)

If a Video CD has “playback control” written on it or its jacket, it

means that particular scenes or information can be selected for

viewing interactively with the television using the menu screen. This

unit can play Video CDs with playback control.

Using menus to control play of a Video CD is called “menu play” in

these operating instructions.

Play list

This is a collection of scenes. It enables you to play these scenes in

succession or to select specific ones to play.

Program

This is a division on DVD-RAM.

Direct navigator

This is a list of programs you have recorded. You can select pro-

grams from the list to view. The list also shows the date and time of

recording, the channel, and the titles of titled programs. The select-

ed program is played in the background, making selection even sim-

pler.

Sampling rate

This is the number of samples of sound taken per second during

conversion to a digital signal. Sampling frequency is expressed in

kilohertz (kHz). A high sampling frequency results in a sound close

to the original when played back.

Title/Chapter

DVD-Video are divided up into large sections, titles, and smaller

sections, chapters. The numbers allocated to these sections are

called title numbers and chapter numbers.

Track

This is the smallest division on DVD-Audio, CD, and Video CD, and

usually equates to a single song.

Bitstream

This is the digital form of multiple channel audio data (e.g., 5.1 chan-

nel) before it is decoded into its various channels.

Decoder

A decoder restores the coded signals on DVDs to normal. This is

called decoding.

Dolby Digital

This is a method of coding digital signals developed by Dolby Labo-

ratories. Apart from stereo (2-channel) audio, these signals can also

be 5.1-channel audio. A large amount of audio information can be

recorded on one disc using this method.

Dolby Pro Logic

A surround system where a 4-channel audio track is recorded as

2 channels and then is restored to 4 channels for play. The surround

channel is monaural and can reproduce up to 7 kHz.

DTS (Digital Theater Systems)

This surround system is used in many movie theaters around the

world. There is good separation between the channels, so realistic

sound effects are possible.

Dynamic range

Dynamic range is the difference between the lowest level of sound

that can be heard above the noise of the equipment and the highest

level of sound before distortion occurs.

Film and video

DVDs are recorded using either film or video. Film is recorded at

24 frames per second, the rate movies are filmed at, although some

recent progressive material is recorded at 30 frames per second.

Video is recorded at 30 frames per second.

Frame still and field still

A still is shown when you pause a moving picture. A frame still is

made up of two alternating fields, so the picture may appear blurred,

but overall quality is high.

A field still is not blurred, but it has only half the information of a

frame still so picture quality is lower.

Frames are the still pictures that go together to make a moving pic-

ture. There are about 30 frames shown each second.

One frame is made up of two fields. A regular television shows these

fields one after the other to create frames.

Interlace and progressive output

NTSC, the video signal standard, has 480 interlaced (i) scan lines,

whereas progressive scanning uses twice the number of scan lines.

This is called 480p. The 480i video signals output from this unit’s

COMPONENT VIDEO OUT terminals (Y, P

B/CB, PR/CR) allow you to

enjoy higher quality pictures than if the signals were output from the

video output terminal or S VIDEO OUT terminal. The COMPONENT

VIDEO OUT terminals are also able to handle 480p (progressive)

video signals which are of even greater resolution.

Glossary

Reference

No sound.

Distorted sound.

Piercing noise comes from the

speakers.

³Check the connections. 9 : ;

³Check the volume on the equipment you have connected.

³Ensure that the input settings for the television and stereo system are correct.

³If you have connected this unit to an amplifier through the AUDIO OUT terminals, go to the Audio

menu in the SET UP menus, and change “Speaker Setting” to suit your speakers. Select the

large or small icon for all the speakers you have connected. P

³Turn Virtual Surround off if it causes distortion. F

³Output from this unit will be in stereo (two channels) when Virtual Surround is on. Turn Virtual

Surround off if you are using three or more speakers. F

³Due to the specifications on some types of televisions, both video and audio may be cut off when

you turn the VIDEO OFF feature on. ?

³If the “D.MIX” indicator on the FL display goes out while playing a multi-channel DVD-Audio disc,

sound will only be output from speakers specified by the disc. Read the disc’s instructions for

details.

³If you have connected this unit to other equipment through the DIGITAL AUDIO OUT terminal,

ensure you have selected the correct settings for “Dolby Digital” and “DTS Digital Surround”

in the SET UP menu’s Audio menu. Q

No response when buttons

pressed.

No operations can be performed

with the remote control.

Play fails to start even when

[1] (PLAY) is pressed.

Play starts but then stops

immediately.

Alternative languages fail to be

selected.

No subtitles.

Soundtrack and/or subtitle

language is not the one selected

with the SET UP menus.

Angle cannot be changed.

You have forgotten your ratings

password.

Reset all the settings to Factory

Preset.

Troubleshooting guide

Before requesting service for this player, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or

a minor adjustment on your part may eliminate the problem and restore proper operation.

If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, contact your authorized

YAMAHA dealer or service center for instructions.

Reference pages are shown as black circled numbers 9.

Power

³Some operations may be prohibited by the disc.

³The unit may not be operating properly due to lightning, static electricity or some other external

factor.

Reset procedure:

Press [STANDBY/ON] to switch the unit to the standby mode and then back to ON.

Alternatively, press [STANDBY/ON] to switch the unit to the standby mode, disconnect the AC

power supply cord, and then reconnect it.

³Check the batteries are installed correctly. 6

³The batteries are depleted: Replace them with new ones. 6

³Point the remote control at the remote control sensor and operate. 6

³Condensation has formed: Wait 1 to 2 hours for it to evaporate.

³This unit cannot play discs other than DVD-RAM, DVD-Audio, DVD-Video, Video CD and CD. 5

³This unit cannot play DVD-Video with a region number other than “1”, “ALL” or multiple region

numbers including “1”. 5

³The disc may be dirty and may require cleaning. 6

³Ensure that the disc is installed with the label of the side to be played facing upwards. <

³Check that the DVD-RAM has something recorded on it.

³An alternative language is not selected with discs which do not contain more than one language.

³In the case of some discs, the alternative language cannot be selected with [AUDIO] or

[SUBTITLE]. Try selecting it from the disc’s menu if one is available. =

³Subtitles appear only with discs that contain them.

³Subtitles are cleared from the television. Display the subtitles. G

³Some subtitles recorded around point A or B may fail to appear. E

³The language is not recorded on the disc.

³This function is dependent on software availability. Even if a disc has a number of angles

recorded, these angles may be recorded for specific scenes only. G

³While stopped, press and hold [,] and [;] on the unit and then also press and hold [<]

on the unit until “Initialized” disappears from the television. Turn the unit off and on

again.

All settings will return to the default values.

³Insert the AC power supply cord securely into the household AC outlet. 9

³To conserve power, the unit automatically switches to standby after approximately 30 minutes in

the stop mode. Turn the power back to ON.

Operation

No power.

The unit is automatically switched

to the standby mode.

Sound

Reference

Maintenance

To clean this unit, wipe with a soft, dry cloth.

³Never use alcohol, paint thinner or benzine to clean this unit.

³Before using chemically treated cloth, read the instructions that came with the cloth carefully.

Troubleshooting guide

Picture

Displays

Picture distorted.

No picture.

The picture shown on the

television is not normal.

(The sides of the picture are cut

off or black bands appear at the

top and bottom of the screen.)

There is ghosting when

progressive output is on.

Colors are strange.

Picture quality is poor.

There is a lot of ghosting.

³Some distortion is normal during SEARCH.

³The screen may be disrupted briefly when you turn off the VIDEO OFF feature. ?

³Ensure that the equipment is connected properly. 9 ;

³Make sure the television is on.

³Ensure the television’s video input setting (e.g., VIDEO 1) is correct.

³If “This disc is PAL system. The output is sound only.” is on the television, then you have loaded

a PAL system DVD-Audio and only the audio portion of the disc can be played.

³Go to the Video menu in the SET UP menus, and change “TV Aspect” to suit your television. You

may also need to change the screen mode on the television itself. O

³If you are using progressive output, try changing 4:3 ASPECT and Shift Position with the on-

screen menu icons. K

³Ensure that the unit is not connected through a video cassette recorder. 9

³You cannot view progressive video if your television is not designed to receive progressive

signals. Press [PROGRESSIVE ON] to turn PROGRESSIVE ON off. ?

³Turn PROGRESSIVE ON off. This problem is caused by the editing method or material used on

the DVD, but should be corrected if you use interlace output. ?

³Check the setting for output with the on-screen menu icons. K

³Check the settings in the on-screen menu’s video menu. K

³Use the on-screen menu icons to adjust the picture quality. K

“No Play” appears on the unit’s

display.

No on-screen display.

On-Screen Menu Icons not

displayed or only partially

displayed on the television.

The disc’s menu is displayed in a

different language.

No menu play.

“Check The Disc” appears on the

unit’s display.

“Error” appears on the unit’s

display.

“H··” appears on the unit’s

display.

·· stands for a number.

“No Disc” appears on the unit’s

display.

³You inserted a disc the unit cannot play; insert one it can. 5

³You inserted a blank DVD-RAM.

³Go to Display in the SET UP menus, and select “On” for “On-Screen Messages”. M

³Press the cursor buttons [3, 4] while the rightmost icon is highlighted to move them down. H

³Go to Disc in the SET UP menus, and select the preferred language for “Menus”. M

³Menus are only displayed if they are recorded on the disc.

³Disc is dirty. Wipe the disc clean. 6

³The track playing has been recorded with a nonstandard system.

³Trouble is likely to have occurred. The number following “H” depends on the status of the unit.

Reset procedure:

Press [STANDBY/ON] to switch the unit to the standby mode and then back to ON.

Alternatively, press [STANDBY/ON] to switch the unit to the standby mode, disconnect the AC

power supply cord, and then reconnect it.

³If the service numbers fail to clear, note the service number and contact a qualified service

person.

³You haven’t inserted a disc; insert one.

³You haven’t inserted the disc correctly; insert it correctly. <

Reference

Power supply: AC 120 V, 60 Hz

Power consumption: 16 W

Power consumption in standby

mode: approx. 2 W

Dimensions: 449 (W)k281 (D)k99 (H) mm

[17

/16q (W)k11

/16q (D)k

/32q (H)]

(excluding protrusions)

Weight: 3.5 kC (7.72 lb.)

Signal system: NTSC

Operating temperature range: i5 to i35 oC (i41 to i90 oF)

Operating humidity range: 5–90 % RH (no condensation)

Discs played:

(1) DVD-RAM (DVD-VR compatible)

(2) DVD-Video

(3) DVD-Audio

(4) CD-Audio (CD-DA)

(5) Video CD

(6) CD-R/CD-RW (CD-DA, Video CD formatted discs)

Video output:

Output level: 1 Vp-p (75 )

Output connector: Pin jack

Number of connectors: 2 systems

S video output:

Y output level: 1 Vp-p (75 )

C output level: 0.286 Vp-p (75 )

Output connector: S terminal

Number of connectors: 1 system

Component video output (480P/480I):

Y output level: 1 Vp-p (75 )

B output level: 0.7 Vp-p (75 )

R output level: 0.7 Vp-p (75 )

Output connector: Pin jack

(Y: green, P

B: blue, PR: red)

Number of connectors: 1 system

Audio output:

Output level: 2 Vrms (1 kHz, 0 dB)

Output connector: Pin jack

Number of connectors:

2CH: 1 system

5ch discrete output (5.1ch): 1 system

Audio signal output characteristics:

(1) Frequency response:

³DVD (linear audio): 2 Hz–22 kHz (48 kHz sampling)

2 Hz–44 kHz (96 kHz sampling)

³DVD-Audio: 2 Hz–88 kHz (192 kHz

sampling)

³CD audio: 2 Hz–20 kHz

(2) S/N ratio:

³CD audio: 115 dB

(3) Dynamic range:

³DVD (linear audio): 103 dB

³CD audio: 99 dB

(4) Total harmonic distortion:

³CD audio: 0.002 %

Digital audio output:

Optical digital output: Optical terminal

Coaxial digital output: Pin jack

Phones jack: Stereo, 6.3 mm (

/4q) jack

Pickup: Wave length: 658 nm/790 nm

Laser power: CLASS IIa/CLASS I

Note

Specifications are subject to change without notice.

Weight and dimensions are approximate.

Specifications

Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing uses only.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual

property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized

by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is prohibited.

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. PA PARIS-EST RUE AMBROISE CROIZAT CROISSY-BEAUBOURG BP70-77312 MARNE LAVALLEE, CEDEX 2 FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in Japan

Transcripción de documentos

U NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200 PROGRESSIVE ON GROUP VIDEO OFF AUDIO/VIDEO PHONES STANDBY LEVEL STANDBY /ON 0 10 AU DIO/ VIDE POW ER Í/ O I OPE 1 N/CLO SE 2 3 5 4 6 7 9 VIDEO TOP OFF 8 0 SET UP CAN S10 GR OU P MEN CEL MAR KER PAG E TEX T U DVD AUDIO/VIDEO PLAYER DIRE CT NA VI ME NU ON SC REEN PLAY ENTE MOD E SU B REPEA T SKIP DV A-B E RN AUD IO HP-V .S.S SLO W/S STO P LIST RETU TITL V739 D 700 PLAY R PAU SE ANG LE . S P-V.S .S EAR CH PLA Y . Owners manual Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. AUDIO/ VIDEO RQT5938-W Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. FCC INFORMATION Getting started CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPLIANCE TO RAIN, SPLASHING, DRIPPING OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. This Class B digital apparatus complies with Canadian ICES-003. (for US customers only) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion—and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels. - VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. (FDA 21 CFR) AVOID DIRECT EXPOSURE TO BEAM. CAUTION - VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. (IEC60825-1) ATTENTION - RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D’OUVERTURE. EXPOSITION DANGEREUSE AU FAISCEAU. ADVARSEL - SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING. UNDGÅ UDSÆTTELSE FOR STRÅLING. DANGER VARO! - AVATTAESSA OLET ALTTIINA NÄKYVÄÄ JA NÄKYMÄTÖN LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN. VARNING - SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN. ADVARSEL - SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES. UNNGÅ EKSPONERING FOR STRÅLEN. VORSICHT - SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET. NICHT DEM STRAHL AUSSETZEN. - RQLS0233 2 (Inside of product) Table of contents Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Getting started Connecting an AV amplifier with a built-in decoder . . . . . . . . . Connection to digital audio equipment without a decoder . . . . Connecting an AV amplifier with 5.1-channel audio input terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Analog connection to a 2-channel amplifier or system component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connections using the S video or component video terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Recording to MDs or cassette tapes . . . . . . . . . . . . . . . . . . . . 13 14 15 16 16 17 18 09 09 Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Icons for disc information/Shuttle screen . . . . . . . . . . . . . . . . . 25 Icons for unit information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 10 10 11 11 Enjoying virtual surround effects with 2 speakers or headphones (VIRTUAL SURROUND (V.S.S.)) . . . . . . . . . . 22 Using headphones . . . . . . . . . . . . . . . . . . . . . . . 22 Changing soundtracks, subtitle languages and angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Using On-Screen Menu Icons . . . . . . . . . . . . . . . 24 Changing settings . . . . . . . . . . . . . . . . . . . . . . . . 28 Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Summary of settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Entering a password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Television settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Speaker setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 29 30 31 32 33 Getting started Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . Disc information . . . . . . . . . . . . . . . . . . . . . . . . . Disc handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . The remote control . . . . . . . . . . . . . . . . . . . . . . . Control reference guide . . . . . . . . . . . . . . . . . . . Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repeat play/A-B repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Increasing your enjoyment of movies and music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Basic operations Basic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Resume function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Starting play from a selected program, title, or track . . . . . . . . Skipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frame-by-frame viewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fast forward and rewind—SEARCH . . . . . . . . . . . . . . . . . . . . Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting still pictures—Page Skip . . . . . . . . . . . . . . . . . . . . . Selecting groups to play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . To enjoy even higher quality sound—VIDEO OFF . . . . . . . . . To enjoy even higher quality picture—PROGRESSIVE ON . . 13 13 14 14 14 14 15 15 15 15 Reference Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Troubleshooting guide . . . . . . . . . . . . . . . . . . . . Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 35 36 37 Advanced operations Marking places to play again—MARKER . . . . . 16 Changing the play sequence . . . . . . . . . . . . . . . 17 All group play/Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Playing the programs on DVD-RAM . . . . . . . . . . 19 Selecting programs to play—DIRECT NAVIGATOR . . . . . . . . 19 Using the play list menu to play specific scenes . . . . . . . . . . . 20 Accessories Please check and identify the supplied accessories. ¸ Remote control . . . . . . . . 1 ¸ Batteries . . . . . . . . . . . . . . 2 ¸ AC power supply ¸ Audio/Video cable . . . . . . 1 for remote control cord . . . . . . . . . . . . . . . . . . 1 Note The included AC power supply cord is for use with this unit only. Be sure to use the included AC power supply cord with this unit. 3 PRECAUTIONS Before using this unit please read these operating instructions carefully. Take special care to follow the warnings indicated on the unit itself as well as the safety suggestions listed below. Afterwards keep them handy for future reference. Getting started Safety 1. Power Source—The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. If you are not sure of the type of power supply to your home, consult your appliance dealer or local powe r company. 2. Polarization—If the unit is equipped with a polarized AC power plug (a plug having one blade wider than the other), that plug will fit into the AC outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 3. Power Cord Protection—AC power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Never take hold of the plug or cord if your hand is wet, and always grasp the plug body when connecting or disconnecting it. 4. Overloading—Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 5. Nonuse Periods—When the unit is not being used, turn the power off. When left unused for a long time, the unit should be unplugged from the household AC outlet. 6. Attachments—Do not use attachments not recommended by the unit manufacturer as they may cause hazards. Placement 1. Ventilation—The unit should be situated so that its location or position does not interfere with its proper ventilation. Allow 10 cm (4q) clearance from the rear of the unit. 2. Foreign Material—Care should be taken so that objects do not fall into and liquids are not spilled into the unit. Do not subject this unit to excessive smoke, dust, mechanical vibration, or shock. 3. Carts and Stands—The unit should be used only with a cart or stand that is recommended by the manufacturer. The unit and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn. 4. Mounting—Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. Maintenance Disconnect this unit from the AC outlet before cleaning. Clean the cabinet, panel and controls with a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. Installation Environment 1. Water and Moisture—Do not use this unit near water—for example, near a bathtub, washbowl, swimming pool, or the like. Damp basements should also be avoided. 2. Condensation—Moisture may form on the lens in the following conditions… ³immediately after a heater has been turned on. ³in a steamy or very humid room. ³when the unit is suddenly moved from a cold environment to a warm one. If moisture forms inside this unit, it may not operate properly. To correct this problem, turn on the power and wait about one hour for the moisture to evaporate. 3. Heat—The unit should be situated away from heat sources such as radiators and the like. It also should not be placed in temperatures less than 5 oC (41 oF) or greater than 35 oC (95 oF). Do not place the unit on amplifiers or equipment that may become hot. The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. The heat can damage the unit. MODEL NUMBER! SERIAL NUMBER 4 DVD-S1200 Disc information Disc type Logo Region number Video system Indication used in instructions DVD-RAM (4.7 GB) — NTSC [RAM] DVDAudio — NTSC (and PAL, but audio only) [DVD-A] NTSC [DVD-V] 1 DVD-Video ALL — NTSC [VCD] º Region Management Information (DVD-Video only) This unit responds to the Region Management Information recorded on DVD-Video. This unit’s region number is “1”. You cannot play the disc if the region number on the DVD-Video does not correspond to the region number on the unit. You can play discs with labels containing the region number “1” and “ALL”. Read the disc’s instructions carefully. º Playing DVDs and Video CDs The producer of the material can control how these discs are played. This means that you may not be able to control play of a disc with some operations described in these operating instructions. Read the disc’s instructions carefully. º DVD-RAM discs DVD-RAM discs must meet the following conditions for this unit to be able to play them. It may not be possible to play some discs due to the condition of the recording. Type Non-cartridge discs Discs that can be removed from their cartridges (TYPE 2) Capacity 12 cm 4.7 GB and 8 cm 2.8 GB Recording format Discs recorded with DVD video recorders, DVD video cameras, personal computers, etc., using Version 1.1 of the Video Recording Format (a unified video recording standard). Getting started º Discs that can be played Video CD — — [CD] Audio CD º Discs that cannot be played PAL discs (the audio on DVD-Audio can be played), DVD-RAM (2.6 GB, TYPE 1), DVD-ROM, DVD-R (some DVD-R can be played), CD-ROM, CDV, CD-G, iRW, DVD-RW, CVD, SVCD, SACD, Divx Video Discs and Photo CD. º DVDs that can be played This unit has a Dolby Digital decoder so you can play DVDs with this mark. This unit has a DTS decoder so you can play DVDs with this mark. Note ³Remove TYPE 2 discs from their cartridges before use. Read the instructions for the disc carefully. ³Do not allow the disc to become dirty or scratched. ³Store discs in their cartridges. Be sure the label of the disc and the cartridge both face up when replacing the disc. For your reference Some parts of the disc, for example where one program ends and another begins, may not play smoothly. Non-cartridge 4.7 GB 4.7 GB TYPE 2 disc MP3 playback You can use this unit to play MP3 format audio recorded for personal use with a computer etc. onto CD-R or CD-RW. Play may not be possible in some cases due to the condition of the recording. Discs recorded using MP3 differ to CDs in the following ways. ³Structure of the disc (example) ³Display during play Title Title SP V.S.S. RMTR PGM RNDA- B GROUP TITLE TRACK CHAP PG D.MIX P.PCM MLT.CH HP DVD V CD (Album) (Album) 1 2 3 4 5 6 7 8 9 Chapter (Track) ³Starting play from a selected chapter Press the numeric buttons and press [ENTER]. Example: Chapter 23: [2] ➡ [3] ➡ [ENTER] (Pressing [S10] is unnecessary.) ³Repeat play You can use chapter repeat or title repeat. ³Program play, random play You cannot use program play or random play. VIDEO VR AUDIO ³On-Screen Menu Icons for disc information during play Total number of chapters C 1/ 59 0 : 01 Current chapter Elapsed play time (display only, cannot be changed) Note ³Not compatible with multi-session recordings If you record MP3 onto CD-R/CD-RW over a number of sessions, this unit can play only the recordings made in the first session. ³Recordings will not necessarily be played in the order you recorded them. The recordings will be reordered according to their titles: numbers in numerical order first, upper case in alphabetical order next, and lower case in alphabetical order last. ³If you play an MP3 track that includes still picture data, it will take some time before the music itself starts playing and the elapsed time will not be displayed during this time. Even after the track starts, the correct play time will not be displayed. 5 Disc handling Do not use irregularly shaped discs, such as heart-shaped. (These can damage the unit.) The remote control Batteries R6, AA 1 Getting started 2 º How to hold a disc Do not touch the recorded surface. ³Insert so the poles (i and j) match those in the remote control. ³Do not use rechargeable type batteries. º If the surface is dirty DVD-Audio, DVD-Video, Video CD, CD Wipe it with a damp cloth and then wipe dry. Do not wipe with a circular motion; wipe straight outward from the center. DVD-RAM ³Clean DVD-RAM only with the DVD-RAM/PD disc cleaner available as an optional accessory. ³Never use cloths or cleaners for CDs, etc. Do not; ³mix old and new batteries. ³use different types at the same time. ³heat or expose to flame. ³take apart or short circuit. ³attempt to recharge alkaline or manganese batteries. ³use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body. Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. Replace if the unit does not respond to the remote control even when held close to the front panel. º Condensation Moisture may condense on discs after being brought inside from the cold. If the disc is a DVD-RAM, use the DVD-RAM/PD disc cleaner available as an optional accessory to wipe it dry. With other discs, wipe with a soft, dry, lint-free cloth. Use Remote control signal sensor º Handling precautions ³Do not write on the label side with a ball-point pen or other writing instrument. ³Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. ³Do not attach labels or stickers to discs. (Do not use discs with exposed adhesive from tape or left over peeled-off stickers.) ³Do not use scratch-proof protectors or covers. ³Do not use discs printed with label printers available on the market. 7 m (23 feet) 30° 30° º Do not place or store discs in the following places ³Locations exposed to direct sunlight ³Humid or dusty locations ³Locations directly exposed to a heat vent or heating appliance Aim at the sensor, avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit. ³Keep the transmission window and the unit’s sensor free from dust. ³Operation can be affected by strong light sources, such as direct sunlight, and the glass doors on cabinets. Do not; ³put heavy objects on the remote control. ³take the remote control apart. ³spill liquids onto the remote control. 6 Control reference guide AUDIO/VIDEO @ 1 2 3 4 5 6 OPEN/CLOSE Í/ I A 1 2 3 5 6 7 NATURAL SOUND PROGRESSIVE ON GROUP VIDEO OFF 8 S10 0 SET UP B < DVD AUDIO / VIDEO PLAYER DVD-S1200 4 CANCEL 9 MARKER VIDEO OFF GROUP PAGE TEXT AUDIO/ VIDEO STANDBY LEVEL PHONES STANDBY /ON 0 10 @ ?>= < ; : 9 8 7 C D E F G H TOP MENU MENU PLAY LIST DIRECT NAVI ENTER ON SCREEN RETURN PLAY MODE SUBTITLE REPEAT A-B SKIP I J 7 STOP DVD V756260 AUDIO ANGLE HP-V.S.S. SP-V.S.S. SLOW/SEARCH PAUSE : PLAY K L 5 M N O Getting started POWER P Q R S T 9 8 Buttons such as # function the same as the controls on the unit. Main unit Remote control Page Page 1 Standby indicator (STANDBY) When the unit is connected to the household AC outlet, this indicator lights up in standby mode and goes out when the unit is turned on. 2 PROGRESSIVE ON indicator (PROGRESSIVE ON) . . . . . 15 3 VIDEO OFF indicator (VIDEO OFF) . . . . . . . . . . . . . . . . . . . 15 4 Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 5 GROUP button (GROUP) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 Skip/Search buttons (,,-) . . . . . . . . . . . . . 14 7 Stop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 8 Pause button (;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 9 Play button (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 : Disc tray open/close button (<) . . . . . . . . . . . . . . . . . . . . . 12 ; Display < VIDEO OFF button (VIDEO OFF) . . . . . . . . . . . . . . . . . . . . . 15 = Headphone level control (LEVEL) . . . . . . . . . . . . . . . . . . . . 22 > PROGRESSIVE ON button (PROGRESSIVE ON) . . . . . . . 15 ? Headphone jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 @ Standby/on switch (STANDBY/ON) . . . . . . . . . . . . . . . . . . . 12 Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. A Numeric buttons (1–9, 0, S10) . . . . . . . . . . . . . . . . . . . . . . 13 B Set up button (SET UP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 C Top menu and Direct Navigator button (TOP MENU, DIRECT NAVI) . . . . . . . . . . . . . . . . . . . . . . 13, 19 D Cursor buttons (3, 4, 2, 1)/Enter button (ENTER) . . . . 13 E On screen button (ON SCREEN) . . . . . . . . . . . . . . . . . . . . . 24 F Play mode button (PLAY MODE) . . . . . . . . . . . . . . . . . . . . . 17 G Subtitle button (SUBTITLE) . . . . . . . . . . . . . . . . . . . . . . . . . 23 H Repeat mode button (REPEAT) . . . . . . . . . . . . . . . . . . . . . . 21 I A-B repeat button (A-B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 J Skip buttons (:, 9SKIP) . . . . . . . . . . . . . . . . . . . . . . . 14 K Cancel button (CANCEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 L Marker button (MARKER) . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 M Page button (PAGE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 N Text button (TEXT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 O Menu and Play List button (MENU, PLAY LIST) . . . . . 13, 20 P Return button (RETURN) . . . . . . . . . . . . . . . . . . . . . . . . 24, 28 Q Angle button (ANGLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 R Audio button (AUDIO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 S Headphone and Speaker V.S.S. buttons (HP-V.S.S./SP-V.S.S.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 T Slow/Search buttons (6, 5SLOW/SEARCH) . . . . . . . 14 7 Connection As this unit has built-in Dolby Digital and DTS decoders (➡ page 34), you can enjoy discs recorded with these systems by connecting this unit to the 6-channel input terminals on an AV amplifier (connection [B] below). However, to enjoy the special sound effects available with AV amplifiers that can make you feel like you were in a cinema or hall, connect this unit digitally to the AV amplifier (connection [A] below). Use analog connection [B] to enjoy the high quality audio (sampling frequencies of 192 kHz and 96 kHz) and multi-channel audio found on DVD-Audio. If the disc is copyright-protected, the audio can only be output through the digital output terminal if it is converted to 48 kHz. Getting started What you want to do To enjoy 5.1-channel surround sound How to do it [Digital\connection] Reference page 9 [A] 29 PCM Down Conversion Dolby Digital DTS Digital Surround Change the settings to suit the equipment you connect. 33 Make the speaker settings on the amplifier or decoder. — 10 [B] Speaker Setting Select “Multi-channel”. 32 9 [C] Digital Audio Output Select “On”. 29 PCM Down Conversion Change the settings to suit the equipment you connect. Dolby Digital and DTS Digital Surround Select “PCM”. 33 Connect to an amplifier with 5.1-channel audio input terminals. To enjoy stereo [Digital\connection] Connect to an amplifier with a digital input terminal. [Analog\connection] Reference page Digital Audio Output Select “On”. Connect to an amplifier with built-in decoder or a separate decoder-amplifier combination. [Analog\connection] Settings 10 [D] Connect to an amplifier or system component with analog input terminals. º Other uses Recording to MDs or cassette tapes (➡ page 11). Note ³The equipment connections described are examples. ³Peripheral equipment and optional cables sold separately unless otherwise indicated. ³Before connection, turn off all equipment and read the appropriate operating instructions. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. + 1992–1997 Dolby Laboratories. All rights reserved. 8 Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other world-wide patents issued and pending. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. + 1996, 2000 Digital Theater Systems, Inc. All rights reserved. A » Connecting an AV amplifier with a built-in decoder Before connection Audio/video cable (included) Yellow (VIDEO) ³Disconnect the AC power supply cord. ³Refer to the amplifier’s operating instructions. White (L) Television MONITOR OUT terminal VIDEO IN Speakers You can enjoy surround sound by connecting from three to six speakers. Example: Six speakers If you do not connect a subwoofer, it is advisable to connect main speakers (L/R) capable of producing bass of less than 100 Hz. Video cable VOLUME INPUT INPUT MODE NATURAL SOUND AV RECEIVER RX–V3000 STANDBY /ON SPEAKERS A B SOURCE /REMOTE DVD D-TV/LD SILENT TREBLE PRESET /TUNING FM/AM EDIT TUNER SAT VCR 1 VCR 2/DVR VIDEO AUX BASS EFFECT MEMORY TUNING MODE MD/TAPE CD-R CABLE BASS PROCESSOR EXTENSION DIRECT PHONES MAN'L/AUTO FM AUTO/NAN'L MONO S VIDEO CD 6CH PHONO INPUT VIDEO L AUDIO R OPTICAL DSP PROGRAM VIDEO AUX REC OUT/ZONE 2 AV amplifier DIGITAL INPUT (OPTICAL) terminal Note when connecting the optical digital audio cable Remove the dust cap DIGITAL INPUT (COAXIAL) terminal Optical digital audio cable Do not bend when connecting. Audio/video cable OR Note Keep the dust cap and reattach when not using the terminal. PCM / DTS Do not connect the unit’s video output through a video cassette recorder The video from this unit may not be played correctly due to copy-guards if you connect a video cassette recorder between the unit and your television. VIDEO INPUT terminal Coaxial cable To household AC outlet (AC 120V, 60 Hz) AC power supply cord (included) AUDIO OUT Align the plug with the terminal Getting started Red (R) DIGITAL VIDEO OUT 6CH DISCRETE CENTER SURROUND L OPTICAL COAXIAL MAIN MIXED 2CH VIDEO L 1 COMPONENT VIDEO OUT (480p / 480l) Y AC IN L S VIDEO Pa PR R SUBWOOFER R R 2 Back of the unit Change PCM Down Conversion, Dolby Digital, and DTS Digital Surround to suit the equipment (➡ pages 29 and 33). C » Conserving power You can still enjoy audio using the connections described above. Make the following settings (➡ pages 29 and 33). ³Digital Audio Output ➡ On ³PCM Down Conversion ➡ Yes ³Dolby Digital and DTS Digital Surround ➡ PCM This unit consumes a small amount of power, even when it is turned off (approx. 2 W ). To save power when the unit is not to be used for a long time, unplug it from the household AC outlet. Connection to digital audio equipment without a decoder Note You cannot use DTS Digital Surround decoders not suited to DVD-Video. 9 Connection B » Connecting an AV amplifier with 5.1-channel audio input terminals Be sure to switch the amplifier to ANALOG input. ³Speaker connections (➡ page 9) ³Television connections (➡ pages 9 and 11) Getting started AV amplifier VOLUME INPUT R INPUT MODE NATURAL SOUND AV RECEIVER RX–V3000 L STANDBY /ON SPEAKERS A B SOURCE /REMOTE DVD D-TV/LD SILENT SAT VCR 1 VCR 2/DVR VIDEO AUX BASS TREBLE EFFECT PRESET /TUNING FM/AM MEMORY TUNING MODE MD/TAPE CD-R TUNER CABLE BASS PROCESSOR EXTENSION DIRECT PHONES CD 6CH PHONO INPUT REC OUT/ZONE 2 EDIT MAN'L/AUTO FM AUTO/NAN'L MONO S VIDEO VIDEO L AUDIO R OPTICAL DSP PROGRAM VIDEO AUX 6CH INPUT terminals Audio cable Audio cable AUDIO OUT PCM / DTS DIGITAL VIDEO OUT 6CH DISCRETE CENTER SURROUND L OPTICAL COAXIAL MAIN MIXED 2CH VIDEO L 1 COMPONENT VIDEO OUT (480p / 480l) Y L S VIDEO Pa PR R R SUBWOOFER R 2 Back of the unit Change “Speaker setting” (➡ page 32). Note ³Turn speaker and headphone V.S.S. (➡ page 22) off when you connect through the 6CH DISCRETE terminals. The unit does not output the signals for channels other than the front speakers when V.S.S. is on. D » Analog connection to a 2-channel amplifier or system component Television Audio cable L VIDEO IN Video cable R AUX IN 2-channel amplifier or system component Back of the unit AUDIO OUT PCM / DTS DIGITAL VIDEO OUT 6CH DISCRETE CENTER SURROUND L OPTICAL COAXIAL MAIN MIXED 2CH VIDEO L 1 COMPONENT VIDEO OUT (480p / 480l) Y AC IN L S VIDEO Pa PR R SUBWOOFER R R 2 To enjoy Dolby Pro Logic ³If you connect an amplifier that can decode Dolby Pro Logic, you will also need to connect center and surround speakers to enjoy surround sound. Read the instructions for the equipment for connection details. ³Turn Virtual Surround off (➡ page 22). Dolby Pro Logic will not function correctly if Virtual Surround is on. 10 Connections using the S video or component video terminals Audio connections (➡ pages 9 and 10) Television AV amplifier Back of the unit VOLUME INPUT INPUT MODE NATURAL SOUND AV RECEIVER RX–V3000 STANDBY /ON SOURCE /REMOTE DVD D-TV/LD SAT VCR 1 VCR 2/DVR VIDEO AUX BASS TREBLE EFFECT PRESET /TUNING FM/AM MEMORY EDIT CD 6CH PHONO INPUT AUDIO OUT MAN'L/AUTO FM AUTO/NAN'L MONO S VIDEO VIDEO L AUDIO R VIDEO OUT OPTICAL DSP PROGRAM PCM / DTS VIDEO AUX REC OUT/ZONE 2 COMPONENT VIDEO OUT (480p / 480l) TUNING MODE MD/TAPE CD-R TUNER CABLE BASS PROCESSOR EXTENSION DIRECT DIGITAL 6CH DISCRETE CENTER SURROUND L OPTICAL COAXIAL MAIN MIXED 2CH VIDEO L 1 Y L S VIDEO Pa PR R SUBWOOFER R R 2 A VIDEO, S VIDEO or COMPONENT VIDEO INPUT terminal B Getting started SPEAKERS A B SILENT PHONES Video cable Video cable S video cable VIDEO INPUT terminal MONITOR OUT terminal [A] S VIDEO OUT terminal The S VIDEO terminal achieves a more vivid picture than the VIDEO terminal by separating the chrominance (C) and luminance (Y) signals. (Actual results depend on the television.) [B] COMPONENT VIDEO OUT terminal These terminals can be used for either interlace or progressive output and provide a purer picture than the S VIDEO terminal. Connection using these terminals outputs the color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors. ³The description of the component video input terminals depends on the television or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR). Connect to terminals of the same color. ³After making this connection, change the black level for a better picture (➡ page 29, Video—Black Level Control). To enjoy progressive video 1. Connect to the component video (480p) input terminals on a television compatible with this unit’s copy guard system. Video will not be displayed correctly if you connect to a television that is incompatible with this unit’s copy guard system. 2. Press [PROGRESSIVE ON] on the front panel so the indicator lights (➡ page 15). Recording to MDs or cassette tapes º Analog recording You can record to an MD or cassette deck. Using analog connection means sound will be unaffected by the copy guards found on DVDs. To make an analog recording Connect the recording equipment (➡ page 10 [D]). with an audio cable º Digital recording You can record the digital signal directly onto an MD. The signals on DVDs will be converted to 48 kHz/16 bit linear PCM. Ensure the following conditions are met. ³There is no copy guard recorded on the disc. ³The recording equipment can handle a sampling frequency of 48 kHz/16 bit. To make a digital recording 1. Connect the recording equipment with an optical or coaxial digital audio cable (➡ page 9 [A]). 2. When recording DVDs, make the following settings. VIRTUAL SURROUND (V.S.S.): OFF (➡ page 22) Digital Audio Output: On (➡ page 29) PCM Down Conversion: Yes (➡ page 29) Dolby Digital and DTS Digital Surround: PCM (➡ page 29) Note ³With CDs, wait for the total play time to appear before turning on your recording unit’s synchro recording feature. The beginning may be cut off if you turn it on while “READING” is displayed. ³With DVDs, recording may be interrupted when a new chapter begins. Use analog recording if this persists. These phenomena occur because DVD players must first determine the audio format and sampling frequency before switching digital output. 11 Basic play 1 3 NATURAL SOUND 2 [RAM] [DVD-A] [DVD-V] [VCD] [CD] Preparation Turn on the television and select the appropriate video input on the television to suit the connections for the player. DVD AUDIO / VIDEO PLAYER DVD-S1200 PROGRESSIVE ON GROUP VIDEO OFF AUDIO/ VIDEO LEVEL PHONES STANDBY STANDBY /ON 0 10 4;∫ PROGRESSIVE ON 1 Press [ê/I, POWER] to turn on the unit. For progressive output Press [PROGRESSIVE ON] so the indicator lights. 2 Press [OPEN/CLOSE] to open the disc tray. 3 Place the disc on the disc tray. AUDIO/VIDEO 1 POWER 2 OPEN/CLOSE Basic operations Í/ I 1 2 3 5 6 7 4 Remove TYPE 2 discs from their cartridges before use. 8 4 CANCEL 9 0 S10 SET UP MARKER VIDEO OFF GROUP PAGE The disc tray closes and play begins. TEXT TOP MENU TEXT MENU DIRECT NAVI º To stop play PLAY LIST ENTER ON SCREEN Press [º] (➡ page 13, Resume function). RETURN PLAY MODE SUBTITLE REPEAT A-B SKIP AUDIO º To pause play [A] ANGLE HP-V.S.S. SP-V.S.S. Press [;] during play. Press [1] (PLAY) to restart play. SLOW/SEARCH STOP PAUSE 4 PLAY DVD ∫ ; Press [1] (PLAY). V739700 º Displaying the text information on discs [DVD-A] [DVD-V] [CD] Remote control only 1 2 You can display the disc title, artist name, and track titles on the television if this information is recorded on the disc. Press [TEXT]. The text display is turned on and off each time you press the button. Some text information also scrolls across the unit’s display. ³The unit cannot display the text on some discs. POWER Í/ I OPEN/CLOSE Open 3 4 Label must face upward. (With double-sided discs, load so the label for the side you want to play is facing up.) Reading Close PLAY CHAP The unit switches to the standby mode after about 30 minutes in the stop mode. DVD VIDEO A 12 PAUSE TITLE DVD VIDEO Note ³If “” appears on the television The operation is prohibited by the unit or disc. ³The disc continues to rotate while the menu is displayed even after you finish playing an item. Press [º] when you finish to preserve the unit’s motor and your television screen. ³Volume may be lower when playing DVDs than when playing other discs or during television broadcasts. If you turn the volume up on the television or amplifier, ensure you reduce the volume again before playing other sources so that a sudden increase in output does not occur. º Auto standby Unit’s display (e.g. DVD-Video is loaded) TITLE Playing CD-R and CD-RW This unit can play CD-DA (digital audio) and Video CD format audio CD-R and CD-RW that have been finalized¤ upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording. ¤ Finalizing is a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW. CHAP Basic play When a menu screen appears on the television NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200 PROGRESSIVE ON GROUP VIDEO OFF [DVD-A] [DVD-V] [VCD] AUDIO/VIDEO LEVEL PHONES STANDBY STANDBY /ON Remote control only 10 1 ∫ To select a 2-digit number Example: To select item 23, press [S10] ➡ [2] ➡ [3]. ³When playing DVDs, you can also use the cursor buttons [3, 4, 2, 1] to select items. Press [ENTER] to confirm your selection. Play of the selected item now begins. AUDIO/VIDEO POWER OPEN/CLOSE Í/ I 1 2 3 4 5 6 7 8 9 0 S10 SET UP MARKER VIDEO OFF GROUP PAGE TOP MENU TOP MENU TEXT MENU DIRECT NAVI Cursor buttons/ ENTER Other buttons used to operate menus Read the disc’s instructions for further details about operation. [9] or [-]: Shows the next menu. [:] or [,]: Shows the previous menu. [RETURN]: Shows the menu screen. [VCD] [TOP MENU]: Shows the first menu screen. [DVD-A] [DVD-V] [MENU]: Shows the menu screen. [DVD-V] Numeric buttons CANCEL PLAY LIST MENU ]A\ DVD menus DVD-Video can have several menus. The menu displayed when you press [TOP MENU] may be different from the menu displayed when you press [MENU]. ENTER ON SCREEN RETURN RETURN PLAY MODE SUBTITLE REPEAT A-B SKIP AUDIO ANGLE HP-V.S.S. SP-V.S.S. B » SLOW/SEARCH :, 9 STOP PAUSE PLAY DVD ∫ 1 V739700 Press the numeric buttons to select an item. Basic operations 0 Resume function [RAM] [DVD-A] [DVD-V] [VCD] [CD] The position you stopped play at is recorded by the unit when “!” is flashing on the unit’s display. While “!” is flashing on the unit’s display, press [1] (PLAY) to start play from where you stopped it. A Title The disc’s top menu Menu Title Menu Title Menu MENU TOP MENU If you are playing DVD-Video, the illustrated message also appears. Press [1] (PLAY) while the message is displayed and the beginning portions of each chapter up to the current one are played. Full play resumes from the point where you stopped play. (This feature works only within a title.) If you do not press [1] (PLAY), the message disappears and play starts from where you stopped it. To cancel Press [º] until “!” disappears from the unit’s display. B DVD VIDEO Press PLAY to Chapter Review Note ³The resume function does not work if the disc’s play time is not displayed. ³The position is cleared when the disc tray is opened. ³The unit saves the position even when you switch the unit to standby except when playing a play list (➡ page 20). C » C Starting play from a selected program, title, or track [RAM] [DVD-A] [DVD-V] [VCD] [CD] 1 2 3 4 Remote control only 5 6 7 8 Press the numeric buttons to select the item. 9 0 S10 To select a 2-digit number Example: To select track 23, press [S10] ➡ [2] ➡ [3]. e.g. Video CD TRACK Play starts from the selected item. V CD Note ³This works only when stopped with some discs. ³This may not work with some discs. ³When playing DVD-Audio and you want to start play from a track in a different group, select the group first (➡ page 15). 13 Basic play A » NATURAL SOUND PROGRESSIVE ON [RAM] [DVD-A] [DVD-V] [VCD] [CD] GROUP VIDEO OFF AUDIO/ VIDEO LEVEL PHONES STANDBY Skipping DVD AUDIO / VIDEO PLAYER DVD-S1200 STANDBY /ON 0 You can skip chapters on DVD-Video, tracks on DVD-Audio, CDs, and Video CDs, and on DVD-RAM you can skip to the start of a program, scene in a play list, or to a marker. 10 1 ; During play or while paused Press [:] or [9]. SET UP MARKER VIDEO OFF GROUP PAGE TOP MENU TEXT B » MENU DIRECT NAVI Basic operations ³Each press increases the number of skips. ³Press ["] or [#] on the main unit. Cursor buttons ON SCREEN [RAM] [DVD-A] [DVD-V] [VCD] RETURN PLAY MODE SUBTITLE REPEAT A-B SKIP :, 9 Frame-by-frame viewing PLAY LIST ENTER AUDIO ANGLE Remote control only HP-V.S.S. SP-V.S.S. SLOW/SEARCH 6, 5 STOP PAUSE PLAY DVD V739700 ; While paused Press the cursor buttons [2] or [1]. The frame changes each time you press the cursor buttons. 1 ³The frames change in succession if you press and hold the button. ³Pressing [;] also activates forward frame-by-frame. A C » SKIP [RAM] [DVD-A] [DVD-V] [VCD] [CD] or Play position [DVD-A] [DVD-V] [VCD] [CD] once twice once Chapter/Track once [RAM] twice [9] [5/9] Program twice During play Press [6] or [5]. Press and hold ["] or [#] on the main unit. Chapter/Track Chapter/Track [:] [:/6] Program Fast forward and rewind—SEARCH once For your reference Audio will be heard during search for most discs. You can turn this audio off if you want to (➡ page 29, Audio—Audio during Search). Program twice three times Play position Marker D » Slow-motion play [RAM] [DVD-A] [DVD-V] [VCD] While paused B Press [6] or [5]. Press and hold ["] or [#] on the main unit. Notes C SLOW/SEARCH or D When playing Video CDs with playback control SLOW/SEARCH or 14 ³The speed of search and slow-motion increases up to 5 steps. ³Press [1] (PLAY) to restart play. ³You cannot move backwards with Video CD during frameby-frame and slow-motion. ³Frame-by-frame and slow motion only work on the moving picture parts of DVD-Audio. ³[,], [2] or [6]: Backward [-], [1] or [5]: Forward Pressing buttons to perform skipping, search, or slow-motion may take you to a menu screen. VIDEO OFF NATURAL SOUND A » DVD AUDIO / VIDEO PLAYER DVD-S1200 PROGRESSIVE ON GROUP VIDEO OFF LEVEL PHONES STANDBY /ON 0 Selecting still pictures—Page Skip [DVD-A] Remote control only During play AUDIO/VIDEO STANDBY Basic play GROUP 10 Press [PAGE]. PROGRESSIVE ON 1 The page changes each time you press the button. B » Selecting groups to play [DVD-A] The tracks on DVD-Audio are divided into groups. How these groups are played differs with the disc so read the instructions that came with the disc for further details. OPEN/CLOSE Í/ I Numeric buttons 1 2 3 5 6 7 9 0 S10 4 8 CANCEL 1 SET UP VIDEO OFF GROUP VIDEO OFF CANCEL MARKER PAGE TEXT 3 PAGE TOP MENU 2·3 MENU DIRECT NAVI PLAY LIST ENTER ON SCREEN REPEAT A-B SKIP STOP DVD V739700 AUDIO Press the cursor buttons select the group number [ENTER]. Press the cursor buttons select the track number [ENTER]. [3, 4] to and press [3, 4] to and press ³You can also select groups with the remote control’s numeric buttons or [GROUP] on the main unit. Press [1] (play) to start playing the selected group. ³Selection may not be allowed in some situations. ANGLE HP-V.S.S. SP-V.S.S. SLOW/SEARCH PAUSE The group and track icons are displayed. The selected group and track begin to play. RETURN PLAY MODE SUBTITLE Press [GROUP]. Basic operations 1 2 AUDIO/VIDEO POWER PLAY Playing all the groups in succession (➡ page 17) 1 Playing bonus groups A e.g. Page 1 PAGE PAGE 1 B ³Some discs will show a menu screen for you to enter your password. Follow the instructions on the screen. ³The bonus group can be played as many times as you like after the password has been entered until the disc is removed from the unit. GROUP GROUP or G 1 Some discs contain bonus groups. To enjoy these groups you may have to enter a password. Refer to the disc’s jacket. 1. While stopped press [GROUP]. 2. Press the cursor buttons [3, 4] to select the bonus group and press [ENTER] or [1] (PLAY). 3. Enter the 4-digit password with the remote control’s numeric buttons and press [ENTER]. 4. Press the cursor buttons [3, 4] to select a track and press [ENTER] to start play. Note If you enter the wrong password, the previous screen will be displayed. Start again from the beginning. You can erase it by pressing [CANCEL]. C » T 1 To enjoy even higher quality sound—VIDEO OFF [RAM] [DVD-A] [DVD-V] [VCD] [CD] You can enjoy higher quality audio by stopping the video signal. Press [VIDEO OFF]. C VIDEO OFF VIDEO OFF or ³The light above the button on the main unit lights. ³VIDEO OFF is canceled if you press the button again or turn the unit off. The light goes out. Note Video signals are output while the disc is stopped and when operations such as searching are performed. The television can appear unusual while video signals are not being output. D » D PROGRESSIVE ON To enjoy even higher quality picture—PROGRESSIVE ON [RAM] [DVD-A] [DVD-V] [VCD] The component video output terminals (Y, PB/CB, PR/CR) can output progressive signals. You can obtain a sharp and smooth highquality picture with less flicker using a television that can receive progressive signals. (➡ page 11) Press [PROGRESSIVE ON]. ³The PROGRESSIVE ON indicator lights. ³PROGRESSIVE ON is canceled if you press the button again. The indicator goes out. 15 Marking places to play again—MARKER Remote control only You can mark specific points on a disc to return to later. This feature only works if the elapsed playing time of the disc is shown on the unit’s display. AUDIO/VIDEO POWER OPEN/CLOSE Í/ I 1 2 3 5 6 7 9 0 S10 SET UP VIDEO OFF GROUP PAGE TOP MENU 4 CANCEL MARKER 1·2 1·2 2 TEXT MENU DIRECT NAVI PLAY LIST ENTER ON SCREEN RETURN PLAY MODE SUBTITLE REPEAT A-B SKIP STOP AUDIO [DVD-A] [DVD-V] [VCD] [CD] 8 CANCEL ANGLE The marker icon appears. Press [MARKER] at the point you want to mark. RETURN To select another marker, press the cursor button [1]. You can mark up to 5 points. HP-V.S.S. SP-V.S.S. [RAM] SLOW/SEARCH PAUSE PLAY DVD You can mark up to 999 points. V739700 1 Advanced operations Press [MARKER]. Press [MARKER]. The marker icon appears and if the disc already has markers, they are displayed. 2 1 MARKER 2 MARKER ✱✱✱✱✱ 1 ✱✱✱✱ Press the cursor button [1] to highlight the first marker, then press [MARKER] at the point you want to mark. To mark the eleventh point and beyond Select the next group of 10 as follows. 1. Press the cursor button [2, 1] to highlight the marker pin icon. Marker pin icon 1 MARKER 1–10 1–10 ✱✱✱✱✱✱✱✱✱✱ 2. Press the cursor button [3] to select “11–20”. 11–20 2 1 2 3 4 5 6 7 8 9 10 ✱✱✱✱✱✱✱✱✱✱ You can select the next group of 10 when the current group is full. 1–10 ✱✱✱✱✱✱✱✱✱✱ MARKER 1–10 1✱✱✱✱✱✱✱✱✱ To clear the marker display Press [RETURN]. To play from a marked position Press the cursor button [2, 1] to select a marker number and press [ENTER]. To clear a marker Press the cursor button [2, 1] to select a marker number and press [CANCEL]. ³You can clear existing markers, but they are restored when you open the disc tray or switch the unit to standby. Note ³All the markers added with this unit are cleared when the unit is switched to standby or the disc tray is opened. [RAM] ³This feature doesn’t work while using a play list. ³The markers are ordered by time. This means that the marker numbers can change when you add and erase markers. 16 Changing the play sequence Remote control only AUDIO/VIDEO POWER A » OPEN/CLOSE Í/ I 2 3 5 6 7 4 [DVD-A] 8 CANCEL 9 0 CANCEL S10 SET UP 1 PAGE TOP MENU ON SCREEN 2 RETURN PLAY MODE SUBTITLE REPEAT A-B AUDIO ANGLE SLOW/SEARCH STOP PAUSE 2·3 PLAY DVD V756260 1 2 Press [1] (PLAY). B » Random play HP-V.S.S. SP-V.S.S. SKIP PLAY MODE While stopped Press [PLAY MODE] until the all group play screen appears. MENU ENTER A The unit plays the tracks in all the groups on a disc. MARKER VIDEO OFF GROUP 1·1 All group play All Group Playback [DVD-A] [VCD] [CD] The unit plays the tracks on a disc in random order. While stopped Press [PLAY MODE] until the random play screen appears. Press PLAY to start [DVD-Audio\only] 2 Press the cursor buttons [2, 1] to select a group and press [ENTER]. PLAY ³You can select more than one group. ³You can also select groups with the numeric buttons. ! B Advanced operations Numeric buttons 1 Press [1] (PLAY). Play now begins in random order. e.g. DVD-Audio (three groups) PLAY MODE 1 Random Playback Choose a group or groups All 1 2 3 SELECT ENTER To clear a group [DVD-A] 1. Press the cursor buttons [2, 1] to select the group you want to clear. 2. Press [CANCEL] or [ENTER]. ³Groups can also be erased by entering the group number with the numeric buttons. RETURN 0 Press PLAY to start RND DVD AUDIO To exit random mode Press [PLAY MODE] while stopped until the random play screen disappears. Note If you select bonus groups on DVD-Audio during random play, you will have to enter a 4-digit password (➡ page 15). 2 Random Playback Choose a group or groups ALL 1 ¢ 2 3 SELECT ENTER ENTER RETURN 0 Press PLAY to start RND DVD AUDIO 3 PLAY 17 Changing the play sequence [DVD-A] [VCD] [CD] AUDIO/VIDEO POWER Remote control only OPEN/CLOSE Í/ I Numeric buttons 1 2 3 5 6 7 9 0 S10 4 Program play 8 CANCEL SET UP CANCEL PAGE TOP MENU 1 TEXT MENU DIRECT NAVI PLAY LIST RETURN PLAY MODE SUBTITLE REPEAT A-B AUDIO ANGLE HP-V.S.S. SP-V.S.S. SKIP SLOW/SEARCH 6, 5 STOP PAUSE PLAY V739700 Advanced operations PLAY MODE Choose a group and track, then press ENTER. 1 No PLAY MODE G T Press [ENTER]. 4 Press the cursor buttons [3, 4] to select a track and press [ENTER]. Time Play 1 6∫ 2 3 5 DVD 15 SELECT Total Time RETURN e.g. DVD-Audio PGM DVD GROUP 0:00 0 Press PLAY to start TRACK 5 AUDIO [DVD-Audio\only] Press the cursor buttons [3, 4] to select a group and press [ENTER]. Each time you press the cursor button, 1()2<- - - - - - ->ALL ^---------------------------------------J ³Repeat steps 2, 3 and 4 to program other tracks. ³You can also select a group or track with the numeric buttons. ³“Total Time” tells you the total time of the programmed tracks. ³All the tracks on a disc are selected when you select “ALL” (all the tracks in the selected group with DVD-Audio). Clear Clear all ENTER While stopped Press [PLAY MODE] until the program play screen appears. 2·3·4 ENTER ON SCREEN 1 You can select up to 32 tracks to play in the order you choose. MARKER VIDEO OFF GROUP Press [1] (PLAY). Play now begins in the programmed sequence. 2 ENTER PLAY MODE Choose a group and track, then press ENTER. 6∫ No G 1 1 T Time Play 15 Clear Clear all To move to the page before or after the one shown Press [6] or [5]. SELECT Total Time RETURN ENTER 3·4 0:00 To clear the programmed tracks one by one Press the cursor buttons [3, 4] to select the item number (No) and press [CANCEL]. Alternatively, press the cursor buttons [3, 4, 2, 1] to select “Clear” and press [ENTER]. 0 Press PLAY to start PLAY MODE Choose a group and track, then press ENTER. 6 To add or change tracks 1. Press the cursor buttons [3, 4] to select an available item. 2. Repeat steps 2–4 to make the changes. ∫15 No G T Time 1 1 5 2:02 2 Play Clear Clear all To clear the whole program Press the cursor buttons [3, 4, 2, 1] to select “Clear all” and p r e s s [ENTER]. The whole program is also cleared when the unit is turned off, or the disc tray is opened. SELECT Total Time ENTER ENTER PGM DVD GROUP 18 0 Press PLAY to start TRACK AUDIO Group No. 5 RETURN 2:02 PLAY Track No. Program No. To exit the program mode Press [PLAY MODE] while stopped until the program play screen disappears. ³The program is retained in memory. Note If you select bonus groups on DVD-Audio during program play, you will have to enter a 4-digit password (➡ page 15). Playing the programs on DVD-RAM [RAM] AUDIO/VIDEO POWER OPEN/CLOSE Í/ I Numeric buttons 1 2 3 4 5 6 7 8 9 0 S10 CANCEL SET UP Selecting programs to play— DIRECT NAVIGATOR MARKER VIDEO OFF GROUP 1 Remote control only PAGE TOP MENU TEXT MENU DIRECT NAVI ON SCREEN RETURN PLAY MODE SUBTITLE REPEAT A-B SKIP AUDIO When a program list is recorded on the disc, you can use it to find programs you want to watch and start play. 2·3 PLAY LIST ENTER 1 ANGLE SLOW/SEARCH STOP PAUSE Press [DIRECT NAVI]. The program list is displayed and the program currently selected plays in the background. HP-V.S.S. SP-V.S.S. 2 3 PLAY DVD V739700 Press the cursor buttons [3, 4] to select the program you want to watch. To enter a 2-digit number Example: 17, press, [S10] ➡ [1] ➡ [7]. 3 1 Press [1] (PLAY) or [ENTER]. Play of the program that was playing in the background continues. TOP MENU DIRECT NAVI DIRECT NAVIGATOR No DATE CH On Program Title 1 12/23(SAT) 10 21:02 Saturday feature 2 12/26(TUE) 4 14:35 Auto action 3 1/12(FRI) 2 20:00 Sunday Cinema 4 1/24(WED) 5 19:30 Music 5 2/20(TUE) 12 19:05 Baseball Contents To display information about a selected program 1. Do steps 1 and 2 to select the program, then press the cursor button [1] to select “Contents” on the right side of the list. 2. Press [ENTER]. The background picture pauses. Press [ENTER] to return to the program list. SELECT RETURN ENTER 2 e.g. when program 2 has been selected. DIRECT NAVIGATOR No DATE CH On Program Title 1 12/23(SAT) 10 21:02 Saturday feature 2 12/26(TUE) 4 14:35 Auto action 3 1/12(FRI) 2 20:00 Sunday Cinema 4 1/24(WED) 5 19:30 Music 5 2/20(TUE) 12 19:05 Baseball To clear the program list Press [DIRECT NAVI]. (The unit returns to the condition it was in before you called up the program list.) Advanced operations You can also select a program with the numeric buttons. Step 3 is unnecessary. If there are 6 or more programs Press the cursor button [4] while program 5 is highlighted. The programs not currently shown are displayed each time you press the cursor button. Contents For your reference ³Program and disc titles are displayed only if they have been entered. ³You cannot change program and disc titles. SELECT RETURN ENTER 3 PLAY 19 Playing the programs on DVD-RAM POWER [RAM] OPEN/CLOSE Í/ I 1 2 3 Remote control only 4 5 6 7 9 0 S10 Numeric buttons 8 CANCEL SET UP VIDEO OFF GROUP PAGE TEXT TOP MENU 2·3·4·5 PLAY LIST ENTER ON SCREEN 1 2 RETURN RETURN REPEAT A-B AUDIO ANGLE HP-V.S.S. SP-V.S.S. SKIP STOP 1 Finding and playing particular scenes is simple if the disc has play lists recorded on it. 1 MENU DIRECT NAVI PLAY MODE SUBTITLE ∫ Using the play list menu to play specific scenes MARKER SLOW/SEARCH PAUSE PLAY V739700 3 PLAYLIST 2 1 3 Advanced operations World Best Hit 4 PLAY LIST 5 4 6 No Date Length Contents Title 1 10/17 0:46:35 Memory lane 2 10/24 0:09:15 Auto action SELECT ENTER The play list screen is displayed. Press the cursor buttons [3, 4] to select the play list you want to watch. ³If you press [ENTER] or select a play list with the numeric buttons, all the scenes in the play list are played from the beginning. DVD MENU Press [PLAY LIST]. 3 11/29 0:12:32 A weekend in Paris 4 12/22 0:07:30 Soccer RETURN 5 Press the cursor button [1] to select “Contents” on the right side of the list and press [ENTER]. Press the cursor buttons [3, 4] to select “Scene List” and press [ENTER]. Press the cursor buttons [3, 4, 2, 1] to select the scene you want to watch and press [ENTER]. The scene starts playing. ³You cannot move the highlighting to places where a scene is not displayed. ³If there are more than 9 scenes in the play list, press the cursor buttons [3, 4, 2, 1] to select “Next” and press [ENTER]. You can move back to the previous page by selecting “Prev”. 2 3 To display information about a selected play list 1. Do steps 1 and 2 to select the play list. 2. Press the cursor button [1] to select “Contents” on the right side of the list and press [ENTER]. 3. Press the cursor buttons [3, 4] to select “Program contents” and press [ENTER]. PLAYLIST 2 1 3 World Best Hit 4 5 6 View PLAYLIST SELECT ENTER ENTER 2 1 Scene List RETURN 3 World Best Hit Program contents 4 5 6 Program contents 4 SELECT PLAYLIST 1 10/17 0:46:35 028 Memory lane ENTER 1 0:00:19 2 3 5 6 7 8 9 1 2000/10/17(TUE) Length Scene 0:46:35 028 When play finishes ³After playing a play list: the play list selection screen appears. ³After playing a scene: the scene selection screen appears. World Best Hit 4 RETURN Memory lane No Date SELECT ENTER ENTER RETURN 1/004 To clear the play list screen Press [PLAY LIST]. The unit returns to the condition it was in before you called up the play list. 5 To stop play list play Press [º] until the screens clear. ENTER 20 Next To return to the previous screen Press [RETURN]. Repeat play [RAM] [DVD-A] [DVD-V] [VCD] [CD] Remote control only AUDIO/VIDEO POWER A » OPEN/CLOSE Í/ I 1 2 3 5 6 7 Numeric buttons 8 CANCEL 0 S10 SET UP VIDEO OFF GROUP PAGE TOP MENU DIRECT NAVI The display changes as illustrated. TEXT ³DVD-RAM Program (PG)>Entire disc (A)>OFF ^----------------------------------------------------------} While playing a playlist Scene (S)>Play list (PL)>OFF ^------------------------------------------------} “PL” is not displayed while playing a specific play list scene. PLAY LIST MENU ENTER RETURN PLAY MODE SUBTITLE REPEAT REPEAT A-B AUDIO 1·2 SLOW/SEARCH STOP ∫ ANGLE HP-V.S.S. SP-V.S.S. SKIP Press [REPEAT]. MARKER MENU ON SCREEN During play PAUSE ³DVD-Audio Track (T)>Whole group (G)>OFF ^------------------------------------------------------} During All group, Program, or Random play modes, “A” is displayed instead of “G”. PLAY 1 DVD V739700 ³DVD-Video Chapter (C)>Title (T)>OFF ^------------------------------------------} A ³Video CD/CD Track (T)>Entire disc (A)>OFF ^--------------------------------------------------} REPEAT If the Video CD has playback control Cancel menu play first. 1. Press [º] during play until “PBC Play” is cleared from the unit’s display. V.S.S. BASS 2. Press the numeric buttons to select a track to start play. 3. Press [REPEAT] (➡ above). To return to menu play, press [º] and press [MENU]. e.g. DVD-Video PGM RNDA-B DVD V CD VIDEO C Advanced operations 9 Repeat play 4 Note ³Repeat play may not work as desired with some DVDs. ³Repeat play does not work if the disc’s elapsed play time is not shown on the unit’s display. ³You cannot use repeat play to repeat an entire DVD-Video or to repeat all the play lists on a DVD-RAM. T OFF º To repeat only your favorite tracks B [DVD-A] [VCD] [CD] 1. Program the tracks you want (➡ page 18). 2. Press [1] (PLAY). Play will start. 3. Press [REPEAT] to display “ T” or “ A”. A-B 1 A✱ B » A-B repeat play You can repeat a section between points A and B within a program, title, or track. 2 A-B AB PGM RNDA-B DVD V CD VIDEO 1 During play 2 Press [A-B] at the starting point (A). Press [A-B] at the finishing point (B). To cancel Press [A-B] until “ V.S.S. ✱✱ BASS ” is displayed. Note ³A-B repeat does not work if the DVD’s elapsed play time is not shown on the unit’s display. ³Some subtitles recorded around point A or B may fail to appear. ³The unit automatically determines the end of a program/title/track as point B when the end of the program/title/track is reached. 21 Increasing your enjoyment of movies and music NATURAL SOUND A » DVD AUDIO / VIDEO PLAYER DVD-S1200 PROGRESSIVE ON GROUP VIDEO OFF AUDIO/ VIDEO STANDBY LEVEL PHONES STANDBY /ON 0 Enjoying virtual surround effects with 2 speakers or headphones (VIRTUAL SURROUND(V.S.S.)) 10 [RAM] [DVD-V] [VCD] LEVEL SP-V.S.S.: Dolby Digital, DTS, MPEG, LPCM, 2-channel or over only HP-V.S.S.: Dolby Digital, MPEG, LPCM, 2-channel or over only AUDIO/VIDEO POWER OPEN/CLOSE Í/ I Remote control only 1 2 3 5 6 7 9 0 S10 4 Use VIRTUAL SURROUND (V.S.S.) (Virtual Surround Sound) to enjoy a surround-like effect if you are using two front speakers or headphones. If you are playing a disc with surround effects recorded on it, the effect is broadened and sound seems to come from virtual speakers on either side. 8 CANCEL SET UP MARKER VIDEO OFF GROUP PAGE TOP MENU TEXT MENU DIRECT NAVI PLAY LIST ENTER ON SCREEN RETURN Advanced operations PLAY MODE SUBTITLE HP.-V.S.S. REPEAT SP.-V.S.S. A HP-V.S.S. SKIP A-B AUDIO During play Press [SP-V.S.S.] or [HP-V.S.S.]. ANGLE Each time you press the button: SP 1/HP 1: Natural effect>SP 2/HP 2: Emphasized effect ^--------=SP OFF/HP OFF: Cancel(--------b HP-V.S.S. SP-V.S.S. SLOW/SEARCH SP-V.S.S. SP 1 TITLE CHAP SP V.S.S. DVD VIDEO Optimum seating position Speaker <When using the television’s speakers> Distance Al Television’s width A Speaker 3 to 4 times distance A Seating position B PHONES 1 LEVEL 1 2 2 0 PHONES LEVEL 0 22 10 10 Note ³Virtual Surround will not work, or will have less effect, with some discs, even if you select “1” or “2”. ³Turn off the surround sound effects on the equipment you have connected when using this effect. ³Turn Virtual Surround off if it causes distortion. ³Output from this unit will be in stereo (two channels) when V.S.S. is on. B Using headphones » 1 Set [LEVEL] to “0” and connect the headphones (not included). 2 Adjust headphone [LEVEL]. volume with Note Avoid listening for prolonged periods of time to prevent hearing damage. Changing soundtracks, subtitle languages and angles AUDIO/VIDEO POWER OPEN/CLOSE Í/ I 1 2 3 5 6 7 4 Numeric buttons 8 CANCEL 9 0 S10 SET UP MARKER VIDEO OFF GROUP PAGE TOP MENU PLAY LIST Cursor buttons ENTER ON SCREEN SUBTITLE AUDIO RETURN PLAY MODE SUBTITLE REPEAT A-B AUDIO Some DVDs have multiple soundtracks, subtitle languages and camera angles, and you can change these during play. TEXT MENU DIRECT NAVI Remote control only ANGLE A » Soundtracks [RAM] [DVD-A] [DVD-V] ANGLE HP-V.S.S. SP-V.S.S. During play A AUDIO DVD-Audio DVD-Video 1 LPCM 1 192k24b 2ch Î Digital 1 ENG 3/2.1 ch B » Soundtrack selected Indicates that a multi- Lights when a multichannel soundtrack channel soundtrack is can be down-mixed. playing. e.g. DVD-Video TITLE Subtitles [RAM] [DVD-A] [DVD-V] Soundtrack playing CHAP D.MIX MLT.CH With DVD-Audio and DVD-Video you can change the subtitle language and turn the subtitles on and off. With DVD-RAM you can turn the subtitles on and off. During play Press [SUBTITLE]. The number changes each time you press the button. DVD VIDEO B The number changes each time you press the button. ³Play restarts from the beginning of the soundtrack when playing DVD-Audio and DVD-RAM soundtracks that are accompanied by still pictures. ³Even if a second soundtrack isn’t recorded on a DVD-Audio, two soundtrack numbers will normally be shown when you press [AUDIO]. The soundtrack currently playing is number 1. ³You can also use this button to turn the vocals on and off on karaoke discs. Read the disc’s instructions for details. Advanced operations Press [AUDIO]. To clear/display the subtitles 1. Press [SUBTITLE]. 2. Press the cursor button [1]. (DVD-Audio and DVD-Video only) 3. Press the cursor button [3, 4] to select “ON” or “OFF”. SUBTITLE DVD-Video ON 1 ENG ON 2 FRA C » Angles [DVD-A] [DVD-V] During play I love you Je t’aime Press [ANGLE]. The number changes each time you press the button. Subtitle language number Notes regarding soundtracks, subtitle languages and angles C ANGLE 1 Angle number 2 ³You can also press the cursor button [3, 4] or use the numeric buttons to change the soundtracks, subtitle languages and angles. ³Some discs allow changes to soundtracks, subtitle languages and angles only by using the disc’s menus. ³Soundtrack and subtitle languages can be set before play (➡ page 29, Disc—Audio and Subtitle). ³“–” or “– –” is displayed instead of the language number in circumstances such as when no language is recorded on the disc. ³Some discs allow you to set angles before multi-angle scenes are played. Read the instructions that come with the DVD. ³In some cases, the subtitle language is not changed to the selected one immediately. ³If the subtitles overlap closed captions recorded on discs, turn the subtitles off. 23 Using On-Screen Menu Icons [RAM] [DVD-A] [DVD-V] [VCD] [CD] AUDIO/VIDEO POWER OPEN/CLOSE Í/ I Remote control only 1 2 3 5 6 7 9 0 S10 4 Numeric buttons 8 CANCEL SET UP On-Screen Menu Icons are menus that contain information about the disc or unit. These menus allow you to perform operations by changing this information. MARKER VIDEO OFF GROUP PAGE TEXT TOP MENU 2·3·4 MENU DIRECT NAVI PLAY LIST Common procedures ENTER 1 ON SCREEN 1 RETURN PLAY MODE SUBTITLE REPEAT A-B SKIP AUDIO RETURN ANGLE Each time you press the button: [>Icons for disc information (=) l ; l>Icons for unit information (>) l ; l>Shuttle screen (?) l ; {=Original display (@) ³The screens depend on the disc contents. HP-V.S.S. SP-V.S.S. SLOW/SEARCH STOP PAUSE PLAY DVD V739700 Advanced operations 2 1 Press the cursor buttons [3, 4] to select the menu. Each time you press the button: [>Play menu (A) l ;: l>Display menu (B) l ;: l>Audio menu (C) l ;: {>Video menu (D) Example: DVD-Video b c 1 : 46 : 50 AB OFF --- Î Digital 1 ENG 3/2.1 ch ON 1 ENG 1 1 2 3 ✱✱ r100 j100 d 2 [Icons\for\unit\information\only] While the leftmost icon is highlighted ON SCREEN a T2 C2 Press [ON SCREEN]. e AB OFF --- f OFF BRIGHT g SP OFF OFF h 3 Press the cursor buttons [2, 1] to select the item. 4 Press the cursor buttons [3, 4] to select the setting. ³Items with “3” or “4” above and below can be changed by [3, 4]. ³Press [ENTER] if the setting does not change after pressing the cursor button [3, 4]. ³Some items require different operations. Read the explanations on the following pages. 1 2 3 ✱✱ For your reference ³Depending on the condition of the unit (playing, stopped, etc.) and the type of disc you are playing, there are some items that you cannot select or change. ³When numbers are displayed (e.g. title No.), the numeric buttons are also effective for setting. When numbers are entered with the numeric buttons, press [ENTER] to register the setting. N 3 To clear the icons Press [RETURN] until the menus disappear. º To change the position of the icons You can lower the position of the icons on the screen if they are cut off for some reason. There are 5 positions to choose from. 1. Press the cursor buttons [2, 1] to select the rightmost icon. 2. Press the cursor buttons [3, 4] to move the icons. 4 T 2 24 Icons for disc information e.g. DVD-Video C 2 2 1 : 46 : 50 Î Digital 1 ENG 3/2.1 ch Icon ON 1 ENG 1 Content Icon [RAM] Program number PG 2 Vocal 1 ✱ [RAM] Play list number PL 2 G 2 T 2 2 [DVD-A] [DVD-V] Subtitle language (See [A] belowfor language abbreviations.) [DVD-V] Title number [DVD-A] [VCD] [CD] Track number ON 1 ENG [RAM] [DVD-A] [DVD-V] Subtitles on/off ON()OFF [DVD-A] [DVD-V] Angle number 1 [DVD-A] [VCD] [CD] Changing the time display [>Track elapsed time l :; l>Track remaining time l :; {>Disc remaining time Î Digital 1 ENG 3/2.1 ch [DVD-A] [DVD-V] Soundtrack language (See [A] at rightfor language abbreviations.) Î Digital 1 ENG 3/2.1 ch [RAM] [DVD-A] [DVD-V] Audio signal type (See [B] at rightfor details.) [VCD] (with playback control only) Menu play Indicates whether menu play (playback control) is on or off. PBC ON [DVD-A] Still picture number Selected picture is shown during play Page 1 [A] Audio/Subtitle language ENG: FRA: DEU: ITA: ESP: NLD: [RAM] [VCD] Audio mode LR()L()R ^---------------------J L R OFF ON 1 ENG [DVD-A] [DVD-V] Time [RAM] Elapsed play time of the program Select a position to start play by specifying a time with the numeric buttons. 1 : 46 : 50 [DVD-A] [DVD-V] Karaoke vocal on/off (Karaoke DVD only) Solo: OFF or ON Duet: OFF, V1iV2, V1 or V2 [DVD-A] Group number [DVD-V] Chapter number C Content English French German Italian Spanish Dutch SVE: NOR: DAN: POR: RUS: JPN: Swedish Norwegian Danish Portuguese Russian Japanese CHI: KOR: MAL: VIE: THA: ¢: Advanced operations T Chinese Korean Malay Vietnamese Thai Others [B] Signal type/data LPCM/PPCM/ëDigital/DTS/MPEG: Signal type k (kHz): Sampling frequency b (bit): Number of bits ch (channel): Number of channels Example: 3/2 .1ch .1: Subwoofer signal (not displayed if there is no subwoofer signal) 0: No rear 1: Mono rear 2: Stereo rear (left/right) 1: Center 2: Main leftiMain right 3: Main leftiMain rightiCenter Shuttle screen Slow-motion play E: Backward [RAM] [DVD-A] [DVD-V] Pause Slow-motion play D: Forward [RAM] [DVD-A] [DVD-V] [VCD] r100 j100 Search Play 6: Backward Search 5: Forward Note ³There are five speeds for both backward and forward slow-motion and search. ³The numbers on either side of the shuttle screen indicate the maximum speeds of the search. ³Slow-motion only works on the moving picture parts of DVD-Audio. 25 Using On-Screen Menu Icons Icons for unit information Play menu Audio menu e.g. DVD-Video e.g. DVD-Video AB Icon AB Advanced operations OFF ––– [DVD-A] [DVD-V] [VCD] [CD] 1 2 3 ✱✱ [RAM] Marker OFF ––– 1 2 3 ✱✱ Content A-B repeat (➡ page 21) [ENTER] (start point) ➡ [ENTER] (finish point) To cancel [ENTER] Repeat play (➡ page 21) [RAM] PG (Program)()A (All)()OFF ^--------------------------------------------------J During play list play S (Scene)()PL (Play list)()OFF ^------------------------------------------------------J [DVD-V] C (Chapter)()T (Title)()OFF ^-------------------------------------------------J [DVD-A] [VCD] [CD] T (Track)()A (All)/G (Group)()OFF ^------------------------------------------------------------J [DVD-A] [VCD] [CD] Play mode display ---: Normal play PGM: Program play RND: Random play ALL: All group play ([DVD-A]) Marker (➡ page 16) [DVD-A] [DVD-V] [VCD] [CD] You can mark up to 5 positions to play again. [RAM] You can mark up to 999 positions to play again. [ENTER] (The unit is now ready to accept markers.) To mark a position [ENTER] (at the desired point) SP OFF Icon 26 [RAM] [DVD-V] [VCD] VIRTUAL SURROUND (V.S.S.) mode (➡ page 22) ³SP-V.S.S. (Dolby Digital, DTS, MPEG, LPCM, 2-channel or over only) ³HP-V.S.S. (Dolby Digital, MPEG, LPCM, 2-channel or over only) V.S.S. level (➡ page 22) SP 1/HP 1(-------------)SP 2/HP 2 ^)SP OFF/HP OFF(J SP OFF [DVD-V] (Dolby Digital/DTS, 3-channel or over only) Dialogue Enhancer ON()OFF The volume of the dialogue from the center channel is raised when you select “ON”. OFF Display menu e.g. DVD-Video OFF Icon OFF To recall a marker [2, 1] ➡ [ENTER] Note ³The marker function does not work during play list play. ³“PL” is not displayed while playing a specific play list scene. Content SP OFF To mark multiple positions [1] ➡ [ENTER] ([RAM] ➡ page 16) To erase a marker [2, 1] ➡ [CANCEL] OFF BRIGHT BRIGHT Content [RAM] [DVD-V] [VCD] Bit-rate display ON()OFF Displays the bit rate and type of picture (approximate values) During play: Shows the average bit rate of the video being played While paused: Shows the type of the frame and its data volume Display dimmer Changes the brightness of the unit’s display. BRIGHT()DIM()AUTO¤ ^----------------------------------J ¤The display dims and any indicators that were on turn off during play. The display brightens and the indicators light temporarily when you perform an operation. Icons for unit information Video menu e.g. U1 Icon N 0 0 Icon 0 U4¤ Nor. Gamma (0 to i5) Increases the brightness of the center ranges to improve detail and contrast in dark scenes. 0 U2 3D-NR (0 to i4) Reduces overall noise. Block NR (0 to i3) Smoothes block noise. Mosquito NR (0 to i3) Reduces the smudging that appears around contrasting sections of the picture. TINT (j15 to i15) Change the overall tint of the picture. 0 Color (j7 to i7) Adjust the shade of the picture’s color. 0 Edge (j3 to 0) Improves edges in the background to reduce fuzziness and improve the sense of depth. 0 Auto1 0 Nor. High sharpness (j6 to i6) Finely adjusts the sharpness of the picture horizontally. V sharpness (j1 to i2) Increases the sharpness of the picture vertically. 0 Sharpness (j6 to i6) Adjust the horizontal resolution of the picture. 0 Content U3¤ Contrast (j7 to i7) Increases the contrast between light and dark parts of the picture. Brightness (0 to i15) Brightens the picture. 0 0 0 [RAM] [DVD-A] [DVD-V] [VCD] Digital picture mode To select the picture mode: [3, 4] N: Normal mode S: Soft mode (Soft picture with fewer video artifacts) F: Fine mode (Details are sharper) C: Cinema mode (Picture for viewing movies) U1/U2/U3¤/U4¤: User mode ¤These settings are only possible when the PROGRESSIVE ON indicator is on (➡ page 15). ³U4 settings are shown along with the N, S, F, and C modes when the progressive output indicator is on. To change the user mode 1. Select User mode and press the cursor button [1]. 2. Press the cursor buttons [3, 4] to select U1, U2, U3, or U4. 3. Press the cursor buttons [2, 1] to select the item you want to change. 4. Press the cursor buttons [3, 4] to change the setting. 0 0 0 Content U1 0 0 Transfer MODE Select the method of conversion for progressive output to suit the type of material being played (➡ page 34, “Film and video”). Auto 1 (normal): for viewing film material Auto 2: for viewing film material (the same as Auto 1, but able to convert 30-frame per second progressive video) Auto 3: for animated material (also able to convert 30-frame per second progressive video) Video: for video material Advanced operations U1 4:3 ASPECT Select how to show video on a widescreen (16:9) television that is compatible with progressive output. Nor. (normal): The picture fills the whole screen. Auto: Letterbox format 4:3 aspect video expands to fill the screen or is shown in the center of the screen with black bands either side. Shr. (shrink): The picture is shown in the 4:3 aspect in the center of the television. Zoom: Select if video with an aspect of 4:3 recorded in the letterbox format is not expanded when “Nor.” or “Auto” is selected. Shift Position (0 to i15) Shift the picture to show subtitles. (Works when the picture fills the screen when 4:3 ASPECT is set to “Auto” or “Zoom”.) Output Change the tone of the picture. Nor. (normal): normal output Sepia: sepia toning Mono (monochrome): black and white Nega: brightness and tone are reversed Note The unit saves the settings you make with the user mode for each disc so when you play a disc again and select a user mode, the same settings are selected. Discs you play for the first time use the previous settings. The unit can save settings for up to 200 discs. The settings for a disc are not saved if you switch to normal, soft, fine, or cinema mode before opening the disc tray or switching the unit to standby. 27 Changing settings 1 SET UP MARKER VIDEO OFF GROUP PAGE TEXT Remote control only TOP MENU MENU DIRECT NAVI PLAY LIST ENTER ON SCREEN 2·3·4 RETURN RETURN PLAY MODE SUBTITLE REPEAT A-B SKIP STOP AUDIO ANGLE HP-V.S.S. SP-V.S.S. Change the settings to suit your preferences and to suit the unit to the environment in which it is being used. These settings are retained in memory until they are changed, even if the unit is turned off. SLOW/SEARCH PAUSE PLAY Common procedures DVD V739700 See page 29 for menu and option details. 1 1 The screen shows the disc settings menu (=) first. SET UP 2 2 Disc English Audio Subtitle Menus Automatic English Ratings Level 8 SELECT ENTER RETURN b SET UP Video TV Aspect 4:3 Pan&Scan 3 Press the cursor buttons [3, 4] to select the item you want to change and press [ENTER]. 4 Press the cursor buttons [3, 4] to select the option and press [ENTER]. Standard (Direct V... TV Type Still Mode Automatic Black Level Control Lighter SELECT c SET UP Audio Press the cursor buttons [2, 1] to select the menu’s tab. The screen changes to display the menu. [>Disc menu (=) l e l u l>Video menu (>) l e l u l>Audio menu (?) l e l u l>Display menu (@) l e l u {-)Others menu (A) a SET UP Advanced operations Press [SET UP] to show the menus. The screen now shows the menu again. Speaker Setting Multi-channel Digital Audio Output On(RE-MASTER Off) PCM Down Conversion Dolby Digital SELECT ENTER RETURN DTS Digital Surround D. Range Compression Audio during Search No Bitstream PCM Off On d SET UP Display Menu Language On-Screen Messages English On SELECT e SET UP Others Demo SELECT 3·4 ENTER 28 Off To return to the previous screen Press [RETURN]. When you are finished Press [SET UP]. Summary of settings This chart shows the settings for this unit. See page 28 for details on menu operation. ³Underlined items are the factory preset. ³The menu and on-screen message language has been factory preset to English. You can change the language by going to “Menu Language” in the Display menu. Disc (➡ [Remarks] page 30) Items Options Audio [DVD-A] [DVD-V] Choose the preferred audio language. English Original Subtitle [DVD-A] [DVD-V] Choose the preferred subtitle language. Automatic English Other ¢¢¢¢ French Menus [DVD-A] [DVD-V] Choose the preferred language for disc menus. English ¢¢¢¢ Spanish Other Ratings [DVD-V] Set a ratings level to limit DVD-Video play. ³The password screen is shown if you choose levels 0 to 7 or if you choose “ Ratings” when levels 0 to 7 have been selected (➡ page 30). ³Select “Level 0” to prevent play of discs that do not have ratings levels recorded on them. Setting ratings (When level 8 is selected) 8 No Limit : All DVD-Video can be played. 1 to 7: Prohibits play of DVD-Video with corresponding ratings recorded on them. 0 Lock All: Prohibits play of all DVD-Video. French Spanish Other ¢¢¢¢ French Spanish Changing ratings (When level 0–7 is selected) Unlock Player Change Level Change Password Temporary Unlock Video TV Aspect Choose the setting to suit your television and preference (➡ page 31). 4:3 Pan&Scan TV Type Change the setting to suit your television (➡ ➡ page 31). Standard (Direct View TV) CRT Projector LCD Projector ProjectionTV Still Mode (➡ [Remarks] page 30) Specify the type of picture shown when paused. Automatic Black Level Control Change the black level of the picture if you connected a television through the COMPONENT VIDEO OUT terminals. Lighter: when connected to a TV through the VIDEO OUT or S VIDEO OUT terminal. Darker: when connected to a TV through the COMPONENT VIDEO OUT (Y/PB/PR) terminals. Speaker Setting [DVD-A] [DVD-V] Choose the settings to suit your audio system and the listening environment (➡ page 32). Multi-channel: when 3 or more speakers are connected. ³Speaker presence and size ³Delay time ³Channel balance Audio 4:3 Letterbox Field 16:9 Frame Advanced operations Menus 2-channel: when 2 speakers or an amplifier with a Dolby Pro Logic decoder is connected. Display Others Digital Audio Output Select whether to output digital signals or not. On: Digital signals are output. Off: Digital signals are not output (improves sound quality when using analog connection) PCM Down Conversion [DVD-A] [DVD-V] Select how to output the audio signals on discs that do not have copyright protection (➡ page 33). No Dolby Digital [DVD-A] [DVD-V] Digital output of Dolby Digital signals (➡ page 33). Bitstream PCM DTS Digital Surround [DVD-A] [DVD-V] Digital output of DTS Digital Surround signals (➡ page 33). PCM Bitstream D. Range Compression [RAM] [DVD-A] [DVD-V] (Dolby Digital only) Change the dynamic range for late night viewing. Off On Audio during Search [RAM] [DVD-A] [DVD-V] [VCD] (➡ [Remarks] page 30) Choose whether to have sound during search. On Off Menu Language Choose the preferred language for these menus and the on-screen messages. English On-Screen Messages Choose whether to show on-screen messages or not. On Off Demo A demonstration of the unit’s on-screen displays starts when you select “On”. The demonstration stops when you press a button and the setting reverts to “Off”. Off On Yes Français Español 29 Changing settings Summary of settings Remarks º Disc—Audio, Subtitle and Menus Original: The original language of each disc will be selected. Other ¢¢¢¢: Input a code number with the numeric buttons (➡ see below). Automatic: If the language selected for “Audio” is not available, subtitles of that language will automatically appear if available on that disc. ³Some discs are designed to start in a certain language despite any changes you make here. º Video—Still Mode Automatic: The unit automatically selects field still or frame still. Field: Less blurred field stills are shown. Select if jittering occurs when “Automatic” is selected. Frame: Sharper frame stills are shown. Select if small text or fine patterns cannot be seen clearly when “Automatic” is selected. º Audio—Audio during Search Select “Off” if sound is interrupted when playing Dolby Digital 5.1-channel and DTS bitstream signals. Audio will be heard when playing some DVD-Audio despite the settings you make here. Entering a password Advanced operations [DVD-V] Refer also to Common procedures (➡ page 28) and the Disc section in Summary of settings (➡ page 29). When setting ratings (When the level is 8) When changing ratings (When the level is 0 to 7) The password screen is shown when you select levels 0 to 7. 1. Input a 4-digit password with the numeric buttons and press [ENTER]. ³If you enter a wrong number, press [CANCEL] to erase it before you press [ENTER]. SET UP The password screen is shown when you select “Ratings”. 1. Input your 4-digit password with the numeric buttons and press [ENTER]. SET UP Ratings Ratings Enter a 4-digit password, then press ENTER. Unlock Player Change Password Change Level Temporary Unlock SELECT ENTER RETURN SELECT Password ✱✱✱✱ 2. Select the item with the cursor buttons [3,4] and press [ENTER], and follow the on-screen instructions . ENTER RETURN The lock symbol appears closed to show the rating is locked. Do not forget your password. 2. Press [ENTER] to confirm the 4 digits. Now, when you insert a DVD-Video that exceeds the ratings limit you set, a message appears on the television. Follow the on-screen instructions. Language code list Abkhazian: Afar: Afrikaans: Albanian: Ameharic: Arabic: Armenian: Assamese: Aymara: Azerbaijani: Bashkir: Basque: Bengali; Bangla: Bhutani: Bihari: Breton: Bulgarian: Burmese: Byelorussian: Cambodian: Catalan: 30 6566 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 7577 6765 Chinese: Corsican: Croatian: Czech: Danish: Dutch: English: Esperanto: Estonian: Faroese: Fiji: Finnish: French: Frisian: Galician: Georgian: German: Greek: Greenlandic: Guarani: Gujarati: 9072 6779 7282 6783 6865 7876 6978 6979 6984 7079 7074 7073 7082 7089 7176 7565 6869 6976 7576 7178 7185 Hausa: Hebrew: Hindi: Hungarian: Icelandic: Indonesian: Interlingua: Irish: Italian: Japanese: Javanese: Kannada: Kashmiri: Kazakh: Kirghiz: Korean: Kurdish: Laotian: Latin: Latvian, Lettish: Lingala: 7265 7387 7273 7285 7383 7378 7365 7165 7384 7465 7487 7578 7583 7575 7589 7579 7585 7679 7665 7686 7678 Lithuanian: Macedonian: Malagasy: Malay: Malayalam: Maltese: Maori: Marathi: Moldavian: Mongolian: Nauru: Nepali: Norwegian: Oriya: Pashto, Pushto: Persian: Polish: Portuguese: Punjabi: Quechua: Rhaeto-Romance: 7684 7775 7771 7783 7776 7784 7773 7782 7779 7778 7865 7869 7879 7982 8083 7065 8076 8084 8065 8185 8277 Romanian: Russian: Samoan: Sanskrit: Scots Gaelic: Serbian: Serbo-Croatian: Shona: Sindhi: Singhalese: Slovak: Slovenian: Somali: Spanish: Sundanese: Swahili: Swedish: Tagalog: Tajik: Tamil: Tatar: 8279 8285 8377 8365 7168 8382 8372 8378 8368 8373 8375 8376 8379 6983 8385 8387 8386 8476 8471 8465 8484 Telugu: Thai: Tibetan: Tigrinya: Tonga: Turkish: Turkmen: Twi: Ukrainian: Urdu: Uzbek: Vietnamese: Volapük: Welsh: Wolof: Xhosa: Yiddish: Yoruba: Zulu: 8469 8472 6679 8473 8479 8482 8475 8487 8575 8582 8590 8673 8679 6789 8779 8872 7473 8979 9085 Changing settings Television settings Change the settings to suit your television and your preference. Refer also to Common Procedures (➡ page 28) and the Video section in Summary of settings (➡ page 29). TV Aspect 4:3 Pan&Scan (Factory preset) Select if you have a regular television and to view 16:9 software in the pan and scan style. 16:9 software prohibited from being shown in the pan and scan style will appear in the letterbox style despite the setting here. 16:9 Select if you have a widescreen television. For your reference DVDs are recorded in a variety of aspect ratios and how these appear depend on these settings, the on-screen menu settings, and the television’s screen modes. ³When connected to a regular 4:3 aspect television, use these settings. ³When connected to a widescreen 16:9 aspect television using progressive output, use the on-screen menu icons (➡ page 27 “4:3 ASPECT”). ³When connected to a widescreen 16:9 aspect television using interlace output, use the television’s screen modes. Advanced operations 4:3 Letterbox Select if you have a regular television and to view 16:9 software in the letterbox style. TV Type Standard (Direct View TV) (Factory preset) Select if you have a standard television, widescreen television, widescreen plasma television, etc. CRT Projector Select if you have a DLP Projector or a CRT Projector. LCD Projector Select if you have an LCD Projector. Projection TV Select if you have a Projection TV. The optimum settings for your television may differ. 31 Changing settings Speaker setting [DVD-A] [DVD-V] Change speaker size and presence =, delay time >, and channel balance ? to suit the speakers you have connected. These settings are not necessary when you select “2-channel” (only two speakers are connected). AUDIO/VIDEO POWER OPEN/CLOSE Í/ I 1 2 3 5 6 7 9 0 S10 4 8 CANCEL SET UP Speaker presence and size (=) MARKER VIDEO OFF GROUP PAGE TEXT TOP MENU MENU DIRECT NAVI PLAY LIST Cursor buttons/ENTER ENTER ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE Main (L) Center Main (R) a b a c a SETUP L Advanced operations Exit ms 0 C Exit Test R dB 0 dB 0 SW dB 0 RS SELECT Test signal dB 0 LS ENTER RETURN ms 0 Rear Subwoofer (L) a (L) c b (R) c (R) a c a A No LS LS Large Small B L R C d e SW f LS RS ³Center speaker Difference 1 2 Setting Approx. 50 cm (1 / feet) 1.3 ms Approx. 100 cm (3 feet) 2.6 ms Approx. 150 cm (5 feet) 3.9 ms Approx. 200 cm (6 feet) 5.3 ms ³Rear speakers Difference 32 Setting Approx. 200 cm (6 feet) 5.3 ms Approx. 400 cm (12 feet) 10.6 ms Approx. 600 cm (18 feet) 15.9 ms 1. Press the cursor buttons [3, 4, 2, 1] to select the item and press [ENTER]. 2. Press the cursor buttons [3, 4] to select the setting and press [ENTER]. Icon examples: Rear speaker (L)[A] Large: When the speaker supports low-frequency (under 100 Hz) reproduction. Small: Select when the speaker does not support low-frequency reproduction. The size setting for the main speakers is automatically determined by the setting for the subwoofer. B » Delay time (>) [DVD-V] (Dolby Digital, center and rear speakers only) For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If you have to place the center or rear speakers closer to the seating position, adjust the delay time to make up for the difference. If distance @ (from the center speaker) and B (from the rear speakers) are the same as or greater than A (from the main speakers), leave the delay time as “0”, the factory preset. If either distance @ or B is less than A, find the difference in the relevant table and change to the recommended setting. Changing the delay time 1. Press the cursor buttons [3, 4, 2, 1] to select the delay time box and press [ENTER]. 2. Press the cursor buttons [3, 4] to adjust the delay time and press [ENTER]. Speaker balance (?) 1. Press the cursor buttons [3, 4, 2, 1] to select “Test” and press [ENTER]. A test signal is output from one speaker at a time, starting with the main left speaker and proceeding clockwise. MAIN (L)>CENTER>MAIN (R) : ; REAR (L)(-----------==REAR (R) 2. While listening to the test signal, press the cursor buttons [3, 4] to adjust the volume of the center and rear speakers so they are the same apparent volume as the main speakers (s6 dB to r6 dB). (The main speakers cannot be adjusted here.) 3. Press [ENTER]. The test signal stops. Note ³Test signal is effective only when you made analog connection. When you make digital connection, make adjustment using the test tone on the amplifier. ³No signal is output for the subwoofer. To adjust its volume, play something, then return to this screen to adjust to suit your taste. When you are finished Press the cursor buttons [3, 4, 2, 1] to select “Exit” and press [ENTER]. Note The unit may be unable to output as set here due to limitations imposed by the unit itself or the disc being played. (The FL display’s “P.PCM” indicator lights or “D.MIX” indicator goes out in these cases.) Changing settings [DVD-A] [DVD-V] Digital output Change these settings when you have connected equipment through this unit’s DIGITAL AUDIO OUT terminals (OPTICAL or COAXIAL). Refer also to Common procedures (➡ page 28) and the Audio section in Summary of settings (➡ page 29). PCM Down Conversion Setting (Able to handle 88.2 kHz or more) Audio output No¤1 Yes Output as is Yes No Down-sampled to 48 kHz or 44.1 kHz ¤1 The equipment cannot output signals of 88.2 kHz or more if the setting is “No” and the equipment is unable to handle these signals. Note Signals are down-sampled to either 48 kHz or 44.1 kHz despite the above settings if they have a sampling frequency of 176.4 kHz or more or are copyright protected. Advanced operations Select how to output the high-quality audio signals (sampling frequencies of 96 kHz and 88.2 kHz) on discs that do not have copyr i g h t protection. Choose the settings to suit the equipment you have connected. Equipment Dolby Digital Bitstream (Factory preset): When you have connected a unit with a built-in Dolby Digital decoder. PCM: When you have connected a unit that doesn’t have a built-in Dolby Digital decoder.¢ DTS Digital Surround PCM (Factory preset): When you have connected a unit that doesn’t have a built-in DTS decoder.¢ Bitstream: When you have connected a unit with a built-in DTS decoder. ¢ These changes to digital audio output must be made, otherwise bitstream signals the decoder cannot handle will be output. If these signals are output, “noise” will be output which can cause harm to your ears and speakers. 33 Glossary Bitstream I/P/B This is the digital form of multiple channel audio data (e.g., 5.1 channel) before it is decoded into its various channels. MPEG, the video compression standard adopted for use with DVD-Video, codes frames using these 3 picture types. I: Intra coded picture (I-picture) This is the standard picture and is a complete picture in itself. This means it has the best picture quality and is the best to use when adjusting the picture. P: Predictive coded picture (P-picture) This picture is calculated based on past I or P-pictures. B: Bidirectionally-predictive coded picture (B-picture) This picture is calculated by comparing past and future I and P-pictures so it has the lowest volume of information. Decoder A decoder restores the coded signals on DVDs to normal. This is called decoding. Dolby Digital This is a method of coding digital signals developed by Dolby Laboratories. Apart from stereo (2-channel) audio, these signals can also be 5.1-channel audio. A large amount of audio information can be recorded on one disc using this method. Linear PCM (pulse code modulation) Dolby Pro Logic A surround system where a 4-channel audio track is recorded as 2 channels and then is restored to 4 channels for play. The surround channel is monaural and can reproduce up to 7 kHz. PCM is the usual digital method used for music CDs. DVDs have a greater volume so they use linear PCM, which has a higher sampling rate. Compressed PCM signals are called packed PCM (PPCM). DTS (Digital Theater Systems) Optical digital audio cable This surround system is used in many movie theaters around the world. There is good separation between the channels, so realistic sound effects are possible. This cable carries optical digital signals to the amplifier to reduce noise caused by electronic interference. Pan&Scan/Letterbox Dynamic range DVDs are recorded using either film or video. Film is recorded at 24 frames per second, the rate movies are filmed at, although some recent progressive material is recorded at 30 frames per second. Video is recorded at 30 frames per second. In general, DVD-Video are produced with the intention that they be viewed on a widescreen television with an aspect ratio of 16:9. This means you can view most material with the intended aspect ratio on a widescreen television. Material with this ratio will not fit onto a standard television with an aspect ratio of 4:3. Two styles of picture, “Pan&Scan” and “Letterbox”, deal with this problem. Pan&Scan: The sides are cut off so the picture fills the screen. Letterbox: Black bands appear at the top and bottom of the picture so the picture itself appears in an aspect ratio of 16:9. Frame still and field still Playback control (PBC) A still is shown when you pause a moving picture. A frame still is made up of two alternating fields, so the picture may appear blurred, but overall quality is high. A field still is not blurred, but it has only half the information of a frame still so picture quality is lower. Frames are the still pictures that go together to make a moving picture. There are about 30 frames shown each second. One frame is made up of two fields. A regular television shows these fields one after the other to create frames. If a Video CD has “playback control” written on it or its jacket, it means that particular scenes or information can be selected for viewing interactively with the television using the menu screen. This unit can play Video CDs with playback control. Using menus to control play of a Video CD is called “menu play” in these operating instructions. Dynamic range is the difference between the lowest level of sound that can be heard above the noise of the equipment and the highest level of sound before distortion occurs. Reference Film and video Play list This is a collection of scenes. It enables you to play these scenes in succession or to select specific ones to play. Interlace and progressive output NTSC, the video signal standard, has 480 interlaced (i) scan lines, whereas progressive scanning uses twice the number of scan lines. This is called 480p. The 480i video signals output from this unit’s COMPONENT VIDEO OUT terminals (Y, PB/CB, PR/CR) allow you to enjoy higher quality pictures than if the signals were output from the video output terminal or S VIDEO OUT terminal. The COMPONENT VIDEO OUT terminals are also able to handle 480p (progressive) video signals which are of even greater resolution. Program This is a division on DVD-RAM. Direct navigator This is a list of programs you have recorded. You can select programs from the list to view. The list also shows the date and time of recording, the channel, and the titles of titled programs. The selected program is played in the background, making selection even simpler. Sampling rate This is the number of samples of sound taken per second during conversion to a digital signal. Sampling frequency is expressed in kilohertz (kHz). A high sampling frequency results in a sound close to the original when played back. Title/Chapter DVD-Video are divided up into large sections, titles, and smaller sections, chapters. The numbers allocated to these sections are called title numbers and chapter numbers. Track This is the smallest division on DVD-Audio, CD, and Video CD, and usually equates to a single song. 34 Troubleshooting guide Before requesting service for this player, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, contact your authorized YAMAHA dealer or service center for instructions. Reference pages are shown as black circled numbers 9. Power No power. ³Insert the AC power supply cord securely into the household AC outlet. 9 The unit is automatically switched to the standby mode. ³To conserve power, the unit automatically switches to standby after approximately 30 minutes in the stop mode. Turn the power back to ON. No response when buttons pressed. ³Some operations may be prohibited by the disc. ³The unit may not be operating properly due to lightning, static electricity or some other external factor. Reset procedure: Press [STANDBY/ON] to switch the unit to the standby mode and then back to ON. Alternatively, press [STANDBY/ON] to switch the unit to the standby mode, disconnect the AC power supply cord, and then reconnect it. No operations can be performed with the remote control. ³Check the batteries are installed correctly. 6 ³The batteries are depleted: Replace them with new ones. 6 ³Point the remote control at the remote control sensor and operate. 6 Play fails to start even when [1] (PLAY) is pressed. Play starts but then stops immediately. ³Condensation has formed: Wait 1 to 2 hours for it to evaporate. ³This unit cannot play discs other than DVD-RAM, DVD-Audio, DVD-Video, Video CD and CD. 5 ³This unit cannot play DVD-Video with a region number other than “1”, “ALL” or multiple region numbers including “1”. 5 ³The disc may be dirty and may require cleaning. 6 ³Ensure that the disc is installed with the label of the side to be played facing upwards. < ³Check that the DVD-RAM has something recorded on it. Alternative languages fail to be selected. ³An alternative language is not selected with discs which do not contain more than one language. ³In the case of some discs, the alternative language cannot be selected with [AUDIO] or [SUBTITLE]. Try selecting it from the disc’s menu if one is available. = No subtitles. ³Subtitles appear only with discs that contain them. ³Subtitles are cleared from the television. Display the subtitles. G ³Some subtitles recorded around point A or B may fail to appear. E Soundtrack and/or subtitle language is not the one selected with the SET UP menus. ³The language is not recorded on the disc. Angle cannot be changed. ³This function is dependent on software availability. Even if a disc has a number of angles recorded, these angles may be recorded for specific scenes only. G You have forgotten your ratings password. Reset all the settings to Factory Preset. ³While stopped, press and hold [,] and [;] on the unit and then also press and hold [<] on the unit until “Initialized” disappears from the television. Turn the unit off and on again. All settings will return to the default values. Reference Operation Sound No sound. Distorted sound. Piercing noise comes from the speakers. ³Check the connections. 9 : ; ³Check the volume on the equipment you have connected. ³Ensure that the input settings for the television and stereo system are correct. ³If you have connected this unit to an amplifier through the AUDIO OUT terminals, go to the Audio menu in the SET UP menus, and change “Speaker Setting” to suit your speakers. Select the large or small icon for all the speakers you have connected. P ³Turn Virtual Surround off if it causes distortion. F ³Output from this unit will be in stereo (two channels) when Virtual Surround is on. Turn Virtual Surround off if you are using three or more speakers. F ³Due to the specifications on some types of televisions, both video and audio may be cut off when you turn the VIDEO OFF feature on. ? ³If the “D.MIX” indicator on the FL display goes out while playing a multi-channel DVD-Audio disc, sound will only be output from speakers specified by the disc. Read the disc’s instructions for details. ³If you have connected this unit to other equipment through the DIGITAL AUDIO OUT terminal, ensure you have selected the correct settings for “Dolby Digital” and “DTS Digital Surround” in the SET UP menu’s Audio menu. Q 35 Troubleshooting guide Picture Picture distorted. ³Some distortion is normal during SEARCH. ³The screen may be disrupted briefly when you turn off the VIDEO OFF feature. ? No picture. ³Ensure that the equipment is connected properly. 9 ; ³Make sure the television is on. ³Ensure the television’s video input setting (e.g., VIDEO 1) is correct. ³If “This disc is PAL system. The output is sound only.” is on the television, then you have loaded a PAL system DVD-Audio and only the audio portion of the disc can be played. The picture shown on the television is not normal. (The sides of the picture are cut off or black bands appear at the top and bottom of the screen.) ³Go to the Video menu in the SET UP menus, and change “TV Aspect” to suit your television. You may also need to change the screen mode on the television itself. O ³If you are using progressive output, try changing 4:3 ASPECT and Shift Position with the onscreen menu icons. K ³Ensure that the unit is not connected through a video cassette recorder. 9 ³You cannot view progressive video if your television is not designed to receive progressive signals. Press [PROGRESSIVE ON] to turn PROGRESSIVE ON off. ? There is ghosting when progressive output is on. ³Turn PROGRESSIVE ON off. This problem is caused by the editing method or material used on the DVD, but should be corrected if you use interlace output. ? Colors are strange. ³Check the setting for output with the on-screen menu icons. K Picture quality is poor. ³Check the settings in the on-screen menu’s video menu. K There is a lot of ghosting. ³Use the on-screen menu icons to adjust the picture quality. K Reference Displays “No Play” appears on the unit’s display. ³You inserted a disc the unit cannot play; insert one it can. 5 ³You inserted a blank DVD-RAM. No on-screen display. ³Go to Display in the SET UP menus, and select “On” for “On-Screen Messages”. M On-Screen Menu Icons not displayed or only partially displayed on the television. ³Press the cursor buttons [3, 4] while the rightmost icon is highlighted to move them down. H The disc’s menu is displayed in a different language. ³Go to Disc in the SET UP menus, and select the preferred language for “Menus”. M No menu play. ³Menus are only displayed if they are recorded on the disc. “Check The Disc” appears on the unit’s display. ³Disc is dirty. Wipe the disc clean. 6 “Error” appears on the unit’s display. ³The track playing has been recorded with a nonstandard system. “H··” appears on the unit’s display. ³Trouble is likely to have occurred. The number following “H” depends on the status of the unit. Reset procedure: Press [STANDBY/ON] to switch the unit to the standby mode and then back to ON. Alternatively, press [STANDBY/ON] to switch the unit to the standby mode, disconnect the AC power supply cord, and then reconnect it. ³If the service numbers fail to clear, note the service number and contact a qualified service person. ·· stands for a number. “No Disc” appears on the unit’s display. ³You haven’t inserted a disc; insert one. ³You haven’t inserted the disc correctly; insert it correctly. < Maintenance To clean this unit, wipe with a soft, dry cloth. ³Never use alcohol, paint thinner or benzine to clean this unit. ³Before using chemically treated cloth, read the instructions that came with the cloth carefully. 36 Specifications Audio output: Output level: 2 Vrms (1 kHz, 0 dB) Output connector: Pin jack Number of connectors: 2CH: 1 system 5ch discrete output (5.1ch): 1 system Audio signal output characteristics: (1) Frequency response: ³DVD (linear audio): 2 Hz–22 kHz (48 kHz sampling) 2 Hz–44 kHz (96 kHz sampling) ³DVD-Audio: 2 Hz–88 kHz (192 kHz sampling) ³CD audio: 2 Hz–20 kHz (2) S/N ratio: ³CD audio: 115 dB (3) Dynamic range: ³DVD (linear audio): 103 dB ³CD audio: 99 dB (4) Total harmonic distortion: ³CD audio: 0.002 % Digital audio output: Optical digital output: Optical terminal Coaxial digital output: Pin jack Phones jack: Stereo, 6.3 mm (1/4q) jack Pickup: Wave length: 658 nm/790 nm Laser power: CLASS IIa/CLASS I Note Specifications are subject to change without notice. Weight and dimensions are approximate. Reference Power supply: AC 120 V, 60 Hz Power consumption: 16 W Power consumption in standby mode: approx. 2 W Dimensions: 449 (W)k281 (D)k99 (H) mm [1711/16q (W)k111/16q (D)k 329/32q (H)] (excluding protrusions) Weight: 3.5 kC (7.72 lb.) Signal system: NTSC Operating temperature range: i5 to i35 oC (i41 to i90 oF) Operating humidity range: 5–90 % RH (no condensation) Discs played: (1) DVD-RAM (DVD-VR compatible) (2) DVD-Video (3) DVD-Audio (4) CD-Audio (CD-DA) (5) Video CD (6) CD-R/CD-RW (CD-DA, Video CD formatted discs) Video output: Output level: 1 Vp-p (75 ) Output connector: Pin jack Number of connectors: 2 systems S video output: Y output level: 1 Vp-p (75 ) C output level: 0.286 Vp-p (75 ) Output connector: S terminal Number of connectors: 1 system Component video output (480P/480I): Y output level: 1 Vp-p (75 ) PB output level: 0.7 Vp-p (75 ) PR output level: 0.7 Vp-p (75 ) Output connector: Pin jack (Y: green, PB: blue, PR: red) Number of connectors: 1 system Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing uses only. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 37 YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. PA PARIS-EST RUE AMBROISE CROIZAT CROISSY-BEAUBOURG BP70-77312 MARNE LAVALLEE, CEDEX 2 FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA Printed in Japan