DAS ARTEC-508-W Manual de usuario
- Categoría
- Altavoces
- Tipo
- Manual de usuario
Este manual también es adecuado para
ARTEC-506 / ARTEC-508 / ARTEC-526
ARTEC-510 / ARTEC-S15
User's Manual
Antes de utilizar el equipo, lea la sección
“Precauciones de seguridad” de este manual.
Conserve este manual para futuras consultas.
Before operating the device, please read the
“Safety precautions” section of this manual.
Retain this manual for future reference.
CONTENTS
6 - 7
8 - 11
4x ARTEC-508 + 2x ARTEC-S15
4x ARTEC-506 + 1x ARTEC-S15
4x ARTEC-510 + 2x ARTEC-S15
4x ARTEC-526 + 2x ARTEC-S15
INTRODUCTION
LINE DRAWINGS
3
4
5
12
14
ACCESSORIES
CONFIGURATIONS
SAFETY PRECAUTIONS
WARRANTY
DECLARATION OF CONFORMITY
13
SPECIFICATIONS
Manual del Usuario / artec 500 series / User’s Manual
3
artec 500 series
Precauciones de Seguridad
Safety Precautions
Cajas acústicas pasivas / Passive loudspeaker enclosures
Conserve y lea todas estas instrucciones.
Siga todas las advertencias.
El signo de exclamación dentro de un triángulo indica la
existencia de componentes internos cuyo reemplazo puede
afectar a la seguridad.
Keep these instructions.
Heed all warnings. Follow all instructions.
The exclamation point inside an equilateral triangle indicates the
existence of internal components whose substitution may affect
safety.
El doble cuadrado indica equipo de Clase II. The double square indicates Class II device.
Limpie con un paño seco. No use limpiadores con disolventes.
Las especificaciones se encuentran en la etiqueta de la parte
posterior del producto.
The specifications can be found on the rear label of the product.
Clean only with a dry cloth. Do not use any solvent based
cleaners.
No existen partes ajustables por el usuario en el interior de este
equipo. Cualquier operación de mantenimiento o reparación
debe ser realizada por personal cualificado. Es necesario el
servicio técnico cuando el aparato se haya dañado de alguna
forma, tal como que haya caído líquido o algún objeto en el
interior del aparato, haya sido expuesto a lluvia o humedad, no
funcione correctamente o haya recibido un golpe.
No user serviceable parts inside. Refer all servicing to qualified
service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally or has been dropped.
ARTEC-506 -------------> 135 cm
ARTEC-526 -------------> 130 cm
ARTEC-508 -------------> 135 cm
ARTEC-510 -------------> 125 cm
ARTEC-506 -------------> 135 cm
ARTEC-526 -------------> 130 cm
ARTEC-508 -------------> 135 cm
ARTEC-510 -------------> 125 cm
Equipo diseñado para funcionar entre 15ºC y 35ºC con una
humedad relativa máxima del 75%.
Working temperature ranges from 15ºC to 35ºC with a relative
humidity of 75%.
No exponga este equipo a la lluvia o humedad. No exponga el
equipo a salpicaduras ni coloque sobre él objetos que
contengan líquidos, tales como vasos y botellas. Equipo IP-20.
Do not expose this device to rain or moisture. Do not place any
objects containing liquids, such as bottles or glasses, on the top
of the unit. Do not splash liquids on the unit. IP-20 equipment.
No emplace altavoces en proximidad a equipos sensibles a
campos magnéticos, tales como monitores de televisión o
material magnético de almacenamiento de datos.
Do not place loudspeakers in proximity to devices sensitive to
magnetic fields such as television monitors or data storage
magnetic material.
Este símbolo indica que el presente producto no puede ser
tratado como residuo doméstico normal, sino que debe
entregarse en el correspondiente punto de recogida de equipos
eléctricos y electrónicos.
This symbol on the product indicates that this product should
not be treated as household waste. Instead it shall be handed
over to the appicable collection point for the recycling of
electrical and electronic equipment.
El cableado exterior conectado al equipo requiere de su
instalación por una persona instruida o el uso de cables flexibles
ya preparados.
The outer wiring connected to the device requires installation by
an instructed person or the use of a flexible cable already
prepared.
El equipo cuenta con dos conectores de entrada en paralelo
para facilitar la conexión de varias cajas en paralelo.
Note that the two Speakon input connectors are wired in parallel
to provide easy parallel connection of several enclosures.
El colgado del equipo sólo debe realizarse utilizando los herrajes
de colgado recomendados y por personal cualificado. No
cuelgue la caja de las asas.
The appliance should be flown only from the rigging points and
by qualified personnel. Do not suspend the box from the
handles.
Para montaje sobre trípode (las cajas ARTEC-506 y ARTEC-526
precisan accesorio AXC-ZT, no incluído), la altura máxima de
seguridad desde el suelo a la base de la caja montada sobre
trípode modelo TRD-2, con pies a 55 cm del eje del trípode, es:
For mounting on tripod (enclosures ARTEC-506 and ARTEC-526 is
needed AXC-ZT accessory wich is not included), the maximum
safety height from floor to bottom of enclosure when mounting
on a TRD-2 tripod, with legs spread 55cm from the central pole,
is:
55 cm
Manual del Usuario / artec 500 series / User’s Manual
4
GARANTÍA
WARRANTY
Todos nuestros productos están garantizados por un periodo de 24
meses desde la fecha de compra.
Las garantías sólo serán válidas si son por un defecto de
fabricación y en ningún caso por un uso incorrecto del producto.
Las reparaciones en garantía pueden ser realizadas,
exclusivamente, por el fabricante o el servicio de asistencia técnica
autorizado.
Otros cargos como portes y seguros, son a cargo del comprador
en todos los casos.
Para solicitar reparación en garantía es imprescindible que el
producto no haya sido previamente manipulado e incluir una
fotocopia de la factura de compra.
All our products are warrantied against any manufacturing defect
for a period of 2 years from date of purchase.
The warranty excludes damage from incorrect use of the product.
All warranty repairs must be exclusively undertaken by the factory
or any of its authorised service centers.
To claim a warranty repair, do not open or intend to repair the
product.
Return the damaged unit, at shippers risk and freight prepaid, to
the nearest service center with a copy of the purchase invoice.
Manual del Usuario / artec 500 series / User’s Manual
5
DECLARACIÓN DE CONFORMIDAD
DECLARATION OF CONFORMITY
DAS Audio Group, S.L.
C/ Islas Baleares, 24 - 46988 - Pol. Fuente del Jarro - Valencia. España
(Spain).
Declara que la serie artec 500:
Declares that artec 500 series:
Y es conforme a las siguientes Normas Armonizadas Europeas:
In accordance with Harmonized European Norms:
l EN 60065:2014.- Audio, video and similar electronic apparatus. Safety
requirements.
l EN 50581:2012.- Technical documentation for the assessment of
electrical and electronic products with respect to the restriction of
hazardous substances.
Cumple con los objetivos esenciales de las Directivas:
Abide by essential objectives relating Directives:
l De Baja Tensión / Low Voltage 2014/35/UE
l RoHS 2011/65/UE
l RAEE (WEEE) 2012/19/UE
Manual del Usuario / artec 500 series / User’s Manual
INTRODUCTION
ARTEC-508
- Single 8” loudspeaker
- M-34 compression driver
- Vertical or horizontal positioning
- Threaded fixing points for wall mounts
- Pole mount socket
The ARTEC-508 employs a single 8C woofer for low
frequency reproduction. The M-34 compression driver
provides brilliant highs. The birch plywood cabinet
construction offers an ultra-compact design which is available
in black or white. Precise coverage and control in either the
horizontal and vertical position is possible thanks to the
symmetrical 80º horn geometry. The cabinets can be
permanently installed by way os the optional “U” brackets
and accessories which allow for multiple configurations. Four
threaded fixing points for the AXW-1 adjustable wall mount
and a pole mount socket augment adaptability. A robust steel
grille internally lined with acoustically transparent filter cloth
protects components.
ARTEC-510
- Single 10” loudspeaker
- 1” compression driver
- Threaded fixing points for wall mounts
- Pole mount socket
The ARTEC-510 employs a single 10P woofer for low
frequency reproduction. The M-60N compression driver with
neodymium magnet assembly provides brilliant highs. The
birch plywood cabinet construction offers an ultra-compact
design which is available in black or white. Precise coverage
and control with its 110º x 50º horn geometry. The cabinets
can be permanently installed by way of the optional “U”
brackets and accesories which allow for multiple
configurations. Four threaded fixing points for the AXW-1
adjustable wall mount and a pole mount socket augment
adaptability. A robust steel grille internally lined with
acoustically transparent filter cloth protects components.
Settings
The artec 500 series full range systems have been designed to provide wide bandwidth and high SPL in a
visually discrete package. The artec 500 products can be installed on walls, ceilings or columns thanks to an
extensive selection of optional mounting accessories. The ideal choice for under balcony, area fill and near
field applications, their reduced dimensions and sleek styling fits perfectly into multiple surrounding including
hotels, restaurants and karaoke.
6
ARTEC-506
- Single 6” loudspeaker
- M-34 compression driver
- Vertical or horizontal positioning
- Threaded fixing points for wall mounts
- Pole mount accesories
The ARTEC-506 employs a single 6P woofer for low
frequency reproduction. The M-34 compression driver
provides brilliant highs. The birch plywood cabinet
construction offers an ultra-compact design which is available
in black or white. Precise coverage and control in either the
horizontal and vertical position is possible thanks to the
symmetrical 80º horn geometry. The cabinets can be
permanently installed by way of the optional “U” brackets and
accessories which allow for multiple configurations. Four
threaded fixing points for the AXW-1 adjustable wall mount
and stand mounting accessories augment adaptability. A
robust steel grille internally lined with acoustically transparent
filter cloth protects components.
Manual del Usuario / artec 500 series / User’s Manual
7
ARTEC-526
- Twin 6” loudspeakers
- M-34 compression driver
- Vertical or horizontal positioning
- Threaded fixing points for wall mounts
- Pole mount accessories
The ARTEC-526 employs twin 6P woofers for low frequency
reproduction. The M-34 comression driver provides brilliant
highs. The birch plywood cabinet construction offers an ultra-
compact design which is available in black or white. Precise
coverage and control in either the horizontal and vertical
position is possible thank to the symmetrical 80º horn
geometry. The cabinets can be permanently installed by way
of the optical “U” brackets and accessories which allow for
multiple configurations. Four threaded fixing points for the
AXW-1 adjustable wall mount and stand mounting
accessories augment adaptability. A robust steel grille
internally lined with acoustically transparent filter cloth
protects components.
ARTEC-S15
- Bass-reflex subwoofer system
- 15” low frequency transducer
- Precise and powerful bass reproduction
- Top located pole mount socket
The ARTEC-S15 band-pass bass system incorporates a
15LXN low frequency transducer with a 4” voice coil. The
loudspeaker ir protected by a perforated steel grille, sealed
against corrosion using a powder coat finish. The ARTEC-S15
is designed for use in biamped systems. A top located pole-
mount socket permits mounting full-range systems above the
ARTEC-S15 and two bar handles makes moving easy.
Manual del Usuario / artec 500 series / User’s Manual
CONFIGURATIONS
88
4 x ARTEC-506
1 x ARTEC-S15
Standard Configuration
DSP-2040
D10
LINK
D10
LINK
From mixer
Bridge mode
Manual del Usuario / artec 500 series / User’s Manual
CONFIGURATIONS (cont´d)
9
4 x ARTEC-508
2 x ARTEC-S15
Standard Configuration
DSP-2040
D10
LINK
D10
From mixer
LINK
Manual del Usuario / artec 500 series / User’s Manual
CONFIGURATIONS (cont´d)
10
4 x ARTEC-510
2 x ARTEC-S15
Standard Configuration
DSP-2040
D10
LINK
From mixer
D20
LINK
Manual del Usuario / artec 500 series / User’s Manual
CONFIGURATIONS (cont´d)
11
4 x ARTEC-526
2 x ARTEC-S15
Standard Configuration
DSP-2040
D10
LINK
From mixer
D20
LINK
Manual del Usuario / artec 500 series / User’s Manual
LINE DRAWINGS
ALL DIMENSIONS IN MILLIMETERS
12
ARTEC-506ARTEC-510ARTEC-526ARTEC-S15 ARTEC-508
Bottom View
Right ViewFront View Rear View
Rear View
Bottom View
Right ViewFront View
Rear View
Top View
Right View
Front View
Bottom View
Right View
Front View
Rear View
Top View
Right View
Front View
Rear View
286
242
244
Manual del Usuario / artec 500 series / User’s Manual
SPECIFICATIONS
13
1
Based on a 2 hour test continuously applying 6 dB crest factor pink noise (IEC shaped).
Model
Peak Power Handling (-10 dB)
Program Power Handling
RMS Power Handling (1)
Frequency Range (-10 dB)
HF Horn Coverage Angles (-6 dB)
Nominal Impedance
Maximum Peak SPL at 1m
On-axis Sensitivity 1W / 1m
Transducers/ Replacement Parts
Enclosure Material
Color/Finish
Connectors
Dimensions (H x W x D)
Weight
Accessories
ARTEC-508
1200 W
600 W
300 W
55 Hz - 20 kHz
80º x 80º
122 dB
LF: 8C / GM-8C
HF: M-34 / GM-M34
Birch Plywood
44.5 x 24.5 x 28.5 cm
17.5 x 9.6 x 11.2 in
7.9 kg (17.4 lb)
TRD-2
TRD-6
ANL-2
AXW-1
AXU-AR508
AXF-AR508
AXR-AR5
ARTEC-506
800 W
400 W
200 W
65 Hz - 20 kHz
8 Ohms 8 Ohms 8 Ohms 16 Ohms 8 Ohms
80º x 80º
122 dB
90 dB SPL 91 dB SPL 96 dB SPL 93 dB SPL 99 dB SPL
LF: 6P
HF: M-34 / GM-M34
Birch Plywood
Isoflex Black Paint Isoflex Black Paint Isoflex Black Paint Isoflex Black Paint Isoflex Black Paint
2 x NL4 Speakon 2 x NL4 Speakon 2 x NL4 Speakon 2 x NL4 Speakon 2 x NL4 Speakon
38 x 19.5 x 25.5 cm
15 x 7.7 x 10 in
7 kg (15.4 lb)
TRD-2+AXC-ZT
TRD-6+AXC-ZT
ANL-2
AXW-1
AXU-AR506
AXR-AR5
ARTEC-510
1600 W
800 W
400 W
45 Hz - 20 kHz
110º x 50º
128 dB
LF: 10P / GM-10P
HF: M-60N / GM-M60
Birch Plywood
60.5 x 29 x 34.5 cm
23.8 x 11.4 x 13.6 in
11 kg (24.2 lb)
TRD-2
TRD-6
ANL-2
AXW-3
AXU-AR510
AXF-AR510
AXR-AR5
ARTEC-526
1600 W
800 W
400 W
60 Hz - 20 kHz
80º x 80º
125 dB
LF: 2x 6P
HF: M-34 / GM-M34
Birch Plywood
45 x 19.5 x 25.5 cm
21.3 x 7.7 x 10 in
9 kg (19.8 lb)
ANL-2
TRD-2+AXC-ZT
TRD-6+AXC-ZT
AXW-1
AXU-AR526
AXR-AR5
ARTEC-S15
3200 W
1600 W
800 W
45 Hz - 138 Hz
---
137 dB
LF: 15LXN / GM-15LX
Birch Plywood
51 x 46 x 58 cm
20 x 10.1 x 22.8 in
28 kg (61.7 lb)
ANL-2
TRD-6
Manual del Usuario / artec 500 series / User’s Manual
DAS Audio Group, S.L. continuously strives to enhance its products through investigation and development. All
specifications are subject to change without prior notice.
Mounting AXU
Mounting AXF (only for ARTEC-508 & ARTEC-510 enclosures)
14
Introduction
The AXU series are designed for enclosures ARTEC-506, ARTEC-508,
ARTEC-510, ARTEC-526 and different versions.
Introduction
The AXF series are designed for enclosures ARTEC-508, ARTEC-510
and different versions.
Safety Precautions
Wall plugs provided are to be used in brick walls only. For other wall materials, source the suitable wall
plug before use.
DAS Audio Group, S.L., is not responsible for use other than the recommended or whether it be the
result of insufficient strength of the support structure. Use only the screws and wall plugs supplied on
surfaces that will provide sufficient support. Do not use on surfaces such as plaster, and gypsum. It is highly
recommended and in most parts of the world mandatory, that a safety cable be used to secure the enclosure
to the structure.
To ensure optimum safety, the installation should be checked thoroughly at regular intervals replacing all
deteriorated elements.
Loosen the screws before reorienting the speaker. Never force the rigging elements.
Contact a licensed rigger if there is any doubt.
Mounting instructions
You can consult the AXU mounting instructions for artec 500 series on
the web: www.dasaudio.com
Mounting instructions
You can consult the AXF mounting instructions for enclosures ARTEC-
508 and ARTEC-510 on the web: www.dasaudio.com
Manual del Usuario / artec 500 series / User’s Manual
UM_AR5-P_02_EN
www.dasaudio.com
DAS Audio of America, INC.
6900 NW 52th Street
Miami, FL. 33166 - U.S.A.
TOLL FREE: 1 888 DAS 4 USA
DAS Audio Asia PTE. LTD.
3 Temasek Avenue, Centennial
Tower #34-36
Singapore 039190
Tel. +65 6549 7760
DAS Audio Group, S.L.
C/. Islas Baleares, 24
46988 Fuente del Jarro
Valencia, SPAIN
Tel. +34 96 134 0860
DAS do Brasil LTDA.
Rua Dos Andradas, 382 SL
Santa Efigênia, São Paulo
Brasil. CEP: 01208-000
Tel. +551133330764
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
DAS ARTEC-508-W Manual de usuario
- Categoría
- Altavoces
- Tipo
- Manual de usuario
- Este manual también es adecuado para
En otros idiomas
- English: DAS ARTEC-508-W User manual
Documentos relacionados
Otros documentos
-
Crest Audio LQ10P LOUDSPEAKER - S Manual de usuario
-
Optimus C-2040 Manual de usuario
-
-
Intermec AR5 Guía de instalación
-
-
RCA RCR804BR Manual de usuario
-
Sony RM-VZ320 Manual de usuario
-
One For All OARC03G Manual de usuario
-
GE 25020 Manual de usuario
