Yamaha DVDC900 Manual de usuario

Marca: Yamaha

Modelo: DVDC900

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Este manual también es adecuado para

DVD-C900

OWNER’S MANUAL

MODE D’EMPLOI

NATURAL SOUND DVD PLAYER

LECTEUR DVD

NATURAL SOUND DVD PLAYER DVD

C900

POWER

PLAYXCHANGE

OPEN/CLOSE

SKIP/

DVD

VIDEO CD

AUTO

DISPLAY OFF

12345

DISC

1 Read Instructions – All the safety and operating instructions

should be read before the appliance is operated.

2 Retain Instructions – The safety and operating instructions

should be retained for future reference.

3 Heed Warnings – All warnings on the appliance and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and use instructions should

be followed.

5 Cleaning — Unplug this video product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

Exception: A product that is meant for uninterrupted service

and that for some specific reason, such as the possibility of

the loss of an authorization code for a CATV converter, is not

intended to be unplugged by the user for cleaning or any

other purpose, may exclude the reference to unplugging the

appliance in the cleaning description otherwise required in

item 5.

6 Attachments — Do not use attachments not recommended by

the video product manufacturer as they may cause hazards.

7 Water and Moisture – Do not use this video product near

water – for example, near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool, and

the like.

8 Accessories — Do not place this video product on an unstable

cart, stand, tripod, bracket, or table. The video product may

fall, causing serious injury to a child or adult, and serious

damage to the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or sold

with the video product. Any mounting of the appliance should

follow the manufacturer’s instructions, and should use a

mounting accessory recommended

by the manufacturer.

8A An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

9 Ventilation — Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the video

product and to protect it from overheating, and these

openings must not be blocked or covered. The openings

should never be blocked by placing the video product on a

bed, sofa, rug, or other similar surface. This video product

should never be placed near or over a radiator or heat

installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s instructions have

been adhered to.

10 Power Sources — This video product should be operated only

from the type of power source indicated on the marking label.

If you are not sure of the type of power supply to your home,

consult your appliance dealer or local power company. For

video products intended to operate from battery power, or

other sources, refer to the operating instructions.

11 Grounding or Polarization — This video product is equipped

with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing the

plug. If the plug should still fail to fit, contact your electrician to

replace your obsolete outlet. Do not defeat the safety purpose

of the polarized plug.

Alternate Warnings —This video product is equipped with a 3-

wire grounding-type plug, a plug having a third (grounding)

pin. This plug will only fit into a grounding-type power outlet.

This is a safety feature. If you are unable to insert the plug

into the outlet, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of the

grounding-type plug.

12 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the appliance.

SAFETY INSTRUCTIONS

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert you to the

presence of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

you to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

•

Explanation of Graphical Symbols

CAUTION

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

IMPORTANT

Please record the serial number of your unit

in the space below.

Model:

Serial No.:

The serial number is located on the rear of

the unit.

Retain this Owner’s Manual in a safe place

for future reference.

English

1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to

use the product.

2. IMPORTANT : When connecting this product to

accessories and/or another product use only high quality

shielded cables. Cable/s supplied with this product

MUST be used. Follow all installation instructions.

Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE : This product has been tested and found to

comply with the requirements listed in FCC Regulations,

Part 15 for Class “B” digital devices. Compliance with

these requirements provides a reasonable level of

assurance that your use of this product in a residential

environment will not result in harmful interference with

other electronic devices.

This equipment generates/uses radio frequencies and, if

not installed and used according to the instructions

found in the users manual, may cause interference

harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that

interference will not occur in all installations. If this product

is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try

to eliminate the problem by using one of the following

measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to

distribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

FCC INFORMATION (for US customers only)

13 Outdoor Antenna Grounding — If an outside antenna or cable

system is connected to the video product, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA No.

70, provides information with regard to proper grounding of

the mast and supporting structure, grounding of the lead-in

wire to an antenna discharge unit, size of grounding

conductors, location of antenna-discharge unit, connection to

grounding electrodes, and requirements for the grounding

electrode. See the figure below.

14 Lightning — For added protection for this video product

receiver during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will

prevent damage to the video product due to lightning and

power-line surges.

15 Power Lines — An outside antenna system should not be

located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

16 Overloading — Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17 Object and Liquid Entry — Never push objects of any kind

into this video product through openings as they may touch

dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind on the

video product.

18 Servicing — Do not attempt to service this video product

yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19 Damage Requiring Service — Unplug this video product from

the wall outlet and refer servicing to qualified service

personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the

video product.

c. If the video product has been exposed to rain or water.

d. If the video product does not operate normally by following

the operating instructions. Adjust only those controls that

are covered by the operating instructions as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the video product to its normal operation.

e. If the video product has been dropped or the cabinet has

been damaged.

f. When the video product exhibits a distinct change in

performance — this indicates a need for service.

20 Replacement Parts — When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer or have the same

characteristics as the original part. Unauthorized substitutions

may result in fire, electric shock or other hazards.

21 Safety Check — Upon completion of any service or repairs to

this video product, ask the service technician to perform

safety checks to determine that the video product is in proper

operating condition.

EXAMPLE OF ANTENNA GROUNDING

MAST

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810–20)

GROUNDING CONDUCTORS

(NEC SECTION 810–21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

ELECTRIC

SERVICE

EQUIPMENT

NEC – NATIONAL ELECTRICAL CODE

Thank you for selecting this YAMAHA DVD player

CONTENTS

SAFETY INSTRUCTIONS ......Inside of the front cover

Features ....................................................................1

Caution ......................................................................2

Getting started ..........................................................4

Unpacking ..............................................................................4

Installing batteries in the remote controller ............................5

Notes about the remote controller ..........................................5

Names of parts and their functions ........................6

Connections .............................................................9

Speaker setup ........................................................................9

n Speaker configuration .....................................................9

n Placing speakers .............................................................9

Audio connections ................................................................10

n Connecting to an AV amplifier (or receiver) equipped with

a Dolby Digital, MPEG or DTS decoder, or connecting to

a Dolby Digital, MPEG or DTS decoder ........................10

n Connecting to an AV amplifier (or receiver) equipped

with 6 channel input terminals

<For China and General models only>.........................12

n Connecting to a stereo amplifier that has neither

6 channel audio signal input terminals nor Dolby Digital

decoder ..........................................................................13

Video connections ................................................................14

n Connecting to an amplifier equipped with an RCA type

video signal input terminal (including an S-video input

terminal) .........................................................................14

n Connecting to a TV equipped with component

video input terminals ......................................................15

Basic operation ......................................................16

Basic playback .....................................................................16

Playing back a preferred scene or track ...............................19

n Beginning playback from a preferred chapter (or track)

.......................................................................................19

n Skipping to a preferred chapter (or track) on the disc

(Skip search)..................................................................19

n Beginning playback from a preferred title (for DVDs)

or index number (for Video CDs/CDs)............................20

n Beginning playback from a preferred time point

on the disc......................................................................21

Other ways of playback ........................................................22

n To advance or reverse playback rapidly

(Rapid search)................................................................22

n To still picture (or suspend playback).............................22

n Frame advance [ and only].................................22

n To advance or reverse playback in a preferred speed

(Multi-speed playback) [ and only]......................23

n Operations unique for a Video CD in the Playback

Control mode [ only].................................................25

n Changing the audio output mode (to enjoy using a

multisound disc etc.) [ and only].........................26

Displaying various information ............................27

Switching the time display.....................................................27

On Screen Display ...............................................................29

Advanced operation ...............................................32

Repeat play ..........................................................................32

Repeat play between specified two points (A-B repeat play)

..............................................................................................33

Program play ........................................................................34

Random play ........................................................................37

Changing subtitle language [ only]..................................38

Changing audio sound track language [ only].................39

Using a title menu [ only].................................................40

Using a DVD menu [ only]...............................................41

Viewing from another angle [ only]..................................42

Initial settings (on the SET UP menu) ..................43

Items ....................................................................................43

Common procedure for setting change ................................44

Item description and setting change ....................................45

DVD Settings

TV Type .........................................................................45

Display Mode .................................................................46

Menu Language ............................................................47

Subtitle Language .........................................................48

Audio Language ............................................................49

Rating Level ..................................................................50

VCD Settings

Playback Control ...........................................................52

Display Settings

Guide Display ................................................................53

OSD Language ..............................................................54

Background Screen .......................................................55

Screen Saver .................................................................56

FL Dimmer .....................................................................57

Signal System Conversion [ and only]

<For China and General models only> ........................58

Audio Settings

Digital Output .................................................................59

Dynamic Range Control

<For China and General models only> ........................61

Speaker [ only]

<For China and General models only> ........................62

Appendix .................................................................64

Troubleshooting ...................................................................64

Definition of terms.................................................................66

Language code list ...............................................................67

Region management information .........................................68

Notes about handling discs ..................................................68

Specifications .......................................................................69

DVD

VCD

DVD

VCD

DVD

VCD

DVD

English

●

5-Disc Carousel Auto-Changer (for

Playing DVDs, Video CDs and Compact

Discs)

●

Full Opening Disc Table for Changing

5 Discs at a Time

●

Compatible with Almost of All Utility

Functions of DVD Discs

●

PLAYXCHANGE; Disc Changing

Capability while Playing Another

●

Program Play

●

Random Play

●

Single Track/Full Disc Repeat Play and

A-B Repeat Play for Repeating a Section

between Two Specified Points

●

Multi-Speed Playback Capability

●

On Screen Display Function (Displays

This Unit’s Operation Status and Disc

Information on the TV Monitor)

●

SET UP Menu Which Provides You with

Various Changeable or Adjustable Items

for Using This Unit in the Most Suitable

Condition

●

1 OPTICAL and 1 COAXIAL Digital

Terminals to Output Digital Audio Signals

Encoded with Dolby Digital, DTS, MPEG

or Linear PCM

●

S VIDEO and COMPONENT VIDEO

Outputs for High-Quality Picture

Reproduction

●

Remote Control Capability

China and General models only

●

Built-in Dolby Digital Decoder to Provide

You with High-quality 5.1-channel

Surround Sound of Sources Encoded

with Dolby Digital

Features

About the symbols used in this manual

A section whose title has one of the following symbols is

applicable only to the disc represented by the symbol.

.............DVD

.............Video CD

.............CD

* A section with no symbol is applicable to all discs.

DVD

VCD

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby

Laboratories. Confidential Unpublished Works.

1 To ensure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 The voltage to be used must be the same as that specified

on this unit. Using this unit with a higher voltage than that

which is specified is dangerous and may result in a fire or

other type of accident causing damage. YAMAHA will not

be held responsible for any damage resulting from use of

this unit with a voltage other than that which is specified.

3 Install your unit in a cool, dry, clean place – away from

windows, heat sources, and too much vibration, dust,

moisture or cold. Avoid sources of hum (transformers,

motors). To prevent fire or electrical shock, do not expose

to rain or water.

4 This unit should not be placed on appliances, such as

amplifiers, that produce heat, or placed in a cabinet that

impedes the flow of air. This may result in a failure in this

unit. Install this unit in a well ventilated place. In addition, do

not place objects on this unit.

5 The generated digital signals may interfere with other

equipment such as tuners or receivers. Move the system

farther away from such equipment if interference is

observed.

6 Sudden temperature changes and storage or operation in

an extremely humid environment may cause condensation

inside the cabinet.

Condensation can cause the unit to malfunction.

To eliminate condensation, leave the power on with no disc

in the unit until normal playback becomes possible (about 1

hour).

7 Do not operate the unit upside-down. It may overheat,

possibly causing damage.

8 Never open the cabinet. If a foreign object drops into the

unit, contact your dealer.

9 To prevent lightning damage, unplug the power cord and

remove the antenna cable during electrical storms.

10Do not attempt to clean the unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

11Do not use force on switches, knobs or cords. When

moving the set, first turn the unit off. Then gently

disconnect the power plug and the cords connecting to

other equipment. Never pull the cord itself.

12Always set the volume control on the amplifier to minimum

before starting a disc play: increase the volume gradually to

an appropriate level after play has started.

13Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that your unit is

faulty.

This unit can play discs of the following types only.

Video CDs are classified into two types, version 1.1 and 2.0. This unit can play not only discs of version 1.1, but also version

2.0 on which a Playback Control can be made.

Never attempt to play back a disc other than above with this unit because it may cause a damage to this unit and/or other units

connected to this unit.

Examples of disc types which this unit cannot play back:

CD-R, CD-EXTRA, CD-ROM, CD-G, PHOTO CD, DVD-ROM, VSD, CDV, etc.

Note

DVDs and Video CDs can only utilize the features with which they were designed by the software creators. Depending

on the contents of each disc, some operations described in this manual may become inoperative. Be sure to refer to

the instruction for each respective disc.

Type of disc

DVD

Video CD

Mark printed

on the disc

Type of signal

recorded

Sound

Picture (Movie)

Sound

Picture (Movie)

Sound only

Size (Dimension)

12 cm

8 cm (Single type)

12 cm

8 cm (Single type)

12 cm

8 cm (Single type)

Maximum possible

play time

Approx. 4 hours (One side only)

Approx. 8 hours (Both sides)

Approx. 80 minutes (One side only)

Approx. 160 minutes (Both sides)

74 minutes

20 minutes

74 minutes

20 minutes

Caution: Read this before operating your unit.

English

Caution

To prevent a malfunction of this unit:

● Do not use any nonstandard shaped

disc (heart etc.) available on the

market, because it may damage the

unit.

● Do not use a disc with tape, seals, or paste on it, because

damage to the unit may result.

Some nonstandard discs are available on the market though

they look the same as the standard ones. This unit may not

be able to play back such discs in the ways described on this

owner’s manual.

This unit is designed for home use only. Do not use this

unit for business purposes.

Be sure to place this unit on a level surface. If not so, this

unit will fail to work normally at the PLAYXCHANGE operation

and cause damage to the disc(s) and this unit itself.

Caution for moving this unit

● When moving this unit, first remove all discs from the disc

table and close the table by pressing the OPEN/CLOSE

button, and then switch off the power after you confirm

that the front panel display indicates as follows.

Never switch off the power if the front panel display is not

pictured as above, otherwise the unit will break down

during moving because the internal mechanism is not

locked.

● Be sure not to lift or tip the unit with discs remaining in it.

FOR CANADIAN CUSTOMERS

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

OF PLUG TO WIDE SLOT AND FULLY INSERT.

THIS CLASS B DIGITAL APPARATUS MEETS ALL

REQUIREMENTS OF THE CANADIAN INTERFERENCE-

CAUSING EQUIPMENT REGULATIONS.

WARNING

To reduce the risk of fire or electric shock, do not expose this

unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer

servicing to qualified personnel only.

DANGER

Invisible laser radiation when open and interlock failed or

defeated.

Avoid direct exposure to beam.

CAUTION

DVD/VIDEO CD/CD PLAYER IS A CLASS 1 LASER

PRODUCT. HOWEVER THIS DVD/VIDEO CD/CD

PLAYER USES A VISIBLE LASER BEAM WHICH

COULD CAUSE HAZARDOUS RADIATION EXPOSURE

IF DIRECTED. BE SURE TO OPERATE THE DVD/VIDEO

CD/CD PLAYER CORRECTLY AS INSTRUCTED.

WHEN THIS DVD/VIDEO CD/CD PLAYER IS PLUGGED

TO THE WALL OUTLET, DO NOT PLACE YOUR EYES

CLOSE TO THE OPENING OF THE DISC TRAY AND

OTHER OPENINGS TO LOOK INTO THE INSIDE OF

THIS PLAYER.

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR

YOURSELF. REFER SERVICING TO QUALIFIED

PERSONNEL.

Laser component in this product is capable of emitting

radiation exceeding the limit for Class 1.

DISC

(Inside of product)

YAMAHA and the Electronic Industries Association’s

Consumer Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that lets the

sound come through loud and clear without annoying blaring or

distortion – and, most importantly, without affecting your

sensitive hearing.

Since hearing damage from loud sounds is often

undetectable until it is too late, YAMAHA and the

Electronic Industries Association’s Consumer

Electronics Group recommend you to avoid

prolonged exposure from excessive volume levels.

We Want You Listening For A Lifetime

Unpacking

Carefully take this unit and accessories out of the box. You should find the unit itself and the following accessories.

Remote controller Batteries (size AA, R6, UM-3)

Audio/Video connection cord

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

Getting started

English

Getting started

Installing batteries in the remote

controller

Since the remote controller will be used for many of this unit’s

control operations, you should begin by installing the supplied

batteries.

1. Turn the remote controller over and slide the battery

compartment cover in the direction of the arrow.

2. Insert the batteries (R6, AA, UM-3 type) according to the

polarity markings on the inside of the battery compartment.

3. Close the battery compartment cover.

Notes about the remote controller

Battery replacement

If you find that the remote controller must be used closer to the

main unit, the batteries are weak. Replace both batteries with

new ones.

Notes

●

Use only AA, R6, UM-3 batteries.

●

Be sure the polarities are correct. (See the illustration

inside the battery compartment.)

●

Remove the batteries if the remote controller is not used for

an extended period of time.

●

If batteries leak, dispose of them immediately. Avoid

touching the leaked material and contact with clothing, etc.

Clean the battery compartment thoroughly before installing

new batteries.

Remote controller operation range

Notes

●

The area between the remote controller and the main unit

must be clear of large obstacles.

●

Do not expose the remote control sensor to strong lighting,

in particular, an inverter type fluorescent lamp. Otherwise,

the remote controller may not work properly. If necessary,

position the main unit away from direct lighting.

DISC

30°

Remote control

sensor

Within apprxoimately

6 m (19.7 feet)

Front panel

1 POWER switch (p. 16, 17)

Press this switch to turn on the power. Press this switch again

to turn off the power.

2 Disc table (p. 16)

Up to 5 discs can be loaded on the disc table. Five disc-setting

positions on the disc table are numbered from 1 to 5.

3 PLAYXCHANGE button (p. 18)

Press this button to open and close the disc table while playing

a disc. This function enables you to exchange discs other than

the one being played.

4 OPEN/CLOSE button (p. 16)

Opens and closes the disc table.

5 AUTO DISPLAY OFF Indicator (p. 57)

Lights up when “5 FL Dimmer” on the SET UP menu is set to

“OFF”.

6 Remote control sensor

Receives signals from the remote controller.

7 Display panel

See page 8.

8 DISC (1, 2, 3, 4, 5) buttons and indicators

(p. 16, 18, 34)

Pressing a button selects the corresponding number of disc.

The illumination of an indicator shows that the corresponding

number of tray has a disc which this unit can play back.

9 / (PLAY/PAUSE) button

(p. 16, 21, 22, 32, 34, 36, 37)

Pressing this button starts playback. If this button is pressed

during playback, playback is suspended or a picture is kept

still, and if this button is pressed again, normal playback

resumes.

Remote controller

See the pages in parenthesis for details regarding operation.

NATURAL SOUND DVD PLAYER DVD

C900

POWER

AUTO

DISPLAY OFF

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

DVD

VIDEO CD

12 34

A098765

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

KLM

Names of parts and their functions

English

Names of parts and their functions

0 SKIP/SEARCH buttons (p. 19, 22, 24, 25)

SKIP :

Press this button to locate the beginning of the next

chapter or next track.

SKIP :

Press this button to locate the beginning of the

currently playing chapter or track, or the previous

chapter or track.

SEARCH :

Press and hold this button to advance the playback

rapidly.

SEARCH :

Press and hold this button to reverse the playback

rapidly.

A STOP ( ) button (p. 17, 36, 37)

Stops playback.

B DISC SKIP button (p. 16, 34, 37)

Whenever this button is pressed, the selected disc changes.

C CANCEL button (p. 36)

Used to cancel some specific mode or setting of this unit. See

the pages for operating methods for details.

D Numeric buttons

(p. 17–21, 24, 34, 36, 40, 41, 44, 47, 50)

Used to select a title number, chapter number, track number,

etc.

E TITLE button (p. 40)

Press this button to display the title menu of a DVD disc on

the monitor screen. For a disc which has no title menu,

pressing this button is ineffective. For Video CDs and CDs,

pressing this button is ineffective.

F ANGLE button (p. 42)

Whenever pressed, the viewing angle of the picture changes.

This button is effective only for scenes (on a DVD) which have

some angles of view.

G MENU button (p. 41)

Press this button to display the DVD menu of a DVD disc on

the monitor screen. For a disc which has no DVD menu,

pressing this button is ineffective.

H SET UP button (p. 44)

Press this button to display the SET UP menu on the monitor

screen.

I ON SCREEN button (p. 29)

Press this button to turn on and off the OSD (On Screen

Display) screen on the TV monitor. It gives you information

about the current status of this unit and the selected disc.

J S/F REPEAT button (p. 32)

Whenever you press this button, repeat play mode changes.

The selected mode is shown on the front panel display for

single or full repeat. This button also allows you to turn off the

mode.

A/B REPEAT button (p. 33)

Makes this unit repeatedly play a section between 2 points (A

and B) you designate on the disc.

K DISC MODE button (p. 16, 37)

Changes the disc play mode between the single-disc play

mode and the all-disc play mode. In the single-disc play

mode, only a selected disc is played back. In the all-disc play

mode, all discs on the disc table are played back sequentially.

L TIME button (p. 27, 28, 34, 35)

Switches the time display mode.

M RANDOM button (p. 37)

Press this button to play back titles or tracks on a designated

disc or all discs on the disc table in a random order.

N PROG button (p. 34)

Used for programming titles, tracks or a mixture of them in

your desired order.

O TITLE/INDEX button (p. 20, 21)

Whenever you press this button, search mode changes. The

selected mode is shown on the monitor screen for title (or

index) search or time search. This button also allows you to

turn off the mode.

P RETURN button (p. 17, 25, 44, 62)

Press this button to show the previous menu on the monitor

screen.

Q AUDIO button

For DVDs (p. 39)

Changes the audio sound track language if the selected DVD

has two or more audio sound track languages.

For Video CDs and CDs (p. 26)

Changes the output mode of the audio signal output terminals.

Every time this button is pressed, the output mode changes to

“left channel only”, “right channel only”, “left and right

channels”, and repeated.

R /// (p. 17, 23, 40, 41, 44–62)

Move cursors or change selections on the monitor screen.

S SUBTITLE button (p. 38)

Changes the subtitle language if the selected DVD has two or

more subtitle languages.

T (SUBTITLE) OFF/ON button (p. 38)

Turns on and off the showing of subtitles on the monitor

screen.

U MULTI SPEED button (p. 23)

Makes this unit enter into the multi-speed mode during

playback. When this unit is stopped, pressing this button is

ineffective.

V SELECT button (p. 17, 40, 41, 44–62)

Activates the selected menu item or input value.

W PLAY button (p. 16, 21, 22, 32, 34, 36, 37)

Starts playback.

X STILL/PAUSE button (p. 21, 22)

Suspends playback temporarily or keep a picture still. Press

the PLAY or

/ button to return to the standard speed

playback.

Names of parts and their functions

Front panel display

1 PBC

Lights up when this unit is in the Playback Control mode for

playing a Video CD, version 2.0.

2 DVD

Lights up when the selected disc is a DVD.

3 PGM

Lights up when this unit is in the program play mode.

4 VCD

Lights up when the selected disc is a Video CD.

5 CD

Lights up when the selected disc is a compact disc.

6 RDM

Lights up when this unit is in the random play mode.

Lights up during playback.

Lights up while playback is paused.

9 PCM

Lights up when a source recorded in Linear PCM is played

back.

0 DOLBY DIGITAL

Lights up when a source encoded with Dolby Digital is played

back.

A MPEG

Lights up when a source encoded with MPEG 1 or MPEG 2 is

played back.

B DTS

Lights up when a source encoded with DTS is played back.

C DISC 1

Lights up when this unit is in the single-disc play mode.

DISC 5

Lights up when this unit is in the all-disc play mode.

D REP S

Lights up when this unit is in the single-repeat play mode.

REP F

Lights up when this unit is in the full-repeat play mode.

REP A B

Lights up or flashes when this unit is in the A-B repeat play

mode.

E Tray numbers with discs only light up.

The circle enclosing the currently selected tray number lights

up.

F TITLE

Lights up with the selected title number.

TRACK

Lights up with the selected track number.

G CHP

Lights up with the selected chapter number.

INDEX

Lights up with the selected index number.

H Shows a playing time, for example the elapsed time of a

playing chapter and the remaining time (REMAIN) of a

playing chapter.

DVD VCD CD

PBCPGMRDM

TRACK

TITLE

PCM

INDEX

CHP

DTS

TIME

DISC

REP

MPEG

TOTAL

REMAIN

DOLBY

DIGITAL

234 56 7 89 0 AB C D

EF G H

English

Speaker setup

We recommend you to set up a multi-speaker system to enjoy the 5.1 channel surround sound of sources encoded with Dolby

Digital, MPEG or DTS.

m Speaker configuration

The most recommended speaker configuration is the 6 speaker

configuration: 2 main speakers, 2 effect speakers, a center

speaker and a subwoofer.

The main speakers are used for the main source sound. The

effect speakers are used for the effect and surround sounds,

and the center speaker is for the center sounds (dialog etc.).

The subwoofer is for reinforcing low frequencies on your audio

system and low frequency effect sounds of the subwoofer-

channel.

For China and General models only

This unit is designed to output signals of 5.1 channels

efficiently according to your speaker system if you cannot set

up a full 6 speaker configuration. It depends on the setting of “3

Speaker” on the SET UP menu. Refer to pages 62 to 63 for

details. However, this setting is effective only on audio signals

output from the 6CH DISCRETE terminals.

m Placing speakers

Main speakers: On both sides of the TV and almost the

same height as the TV.

Effect speakers: Behind your listening position, facing

slightly inward. Nearly 1.8 m (approx. 6

feet) up from the floor.

Center speaker: Precisely between the main speakers.

(To avoid interference with TV sets, use a

magnetically shielded speaker.)

Subwoofer: The position of the subwoofer is not so

critical because low bass tones are not

highly directional.

Main L Center Main R

Effect L Effect R

Subwoofer

TV set

Subwoofer

Effect L

Effect R

Main L

Main R

Center

Connections

COAXIAL

OPTICAL

MIXED 2CH

VIDEO

COMPONENT VIDEO

VIDEO OUT

S VIDEO

DIGITAL

VIDEO OUT SELECT

VIDEO/

S VIDEO

COMPONENT

VIDEO OUT

MPEG

DTS

COAXIAL OPTICAL

PCM

DIGITAL

AUDIO OUT

REMOTE

CONTROL

OUT IN

Connections

When you connect this unit to an AV amplifier or receiver

equipped with a Dolby Digital, MPEG or DTS decoder, connect

this unit’s OPTICAL (or COAXIAL) terminal to the amplifier’s

optical (or coaxial) digital signal input terminal.

* If the amplifier and Dolby Digital (or MPEG or DTS) decoder

are separated, connect this unit’s OPTICAL (or COAXIAL)

terminal to the decoder’s optical (or coaxial) digital signal

input terminal.

* When you use the Dolby Digital, MPEG or DTS decoder, be

sure to use “1 Digital Output” on the SET UP menu of this

unit to select the “Disc Original” mode for “Dolby Digital”,

“MPEG” or “DTS”. (Refer to page 59 for details.)

Also, connect this unit’s MIXED 2CH AUDIO OUT terminals to

the amplifier’s analog signal input terminals regardless of

making the digital terminal connection. This is necessary for

playing back a source in 2 channel stereo or with Dolby Pro

Logic decoded.

A digital terminal connection is necessary between this

unit and the amplifier (or decoder) for sending the

playback signals of a source encoded with Dolby Digital,

MPEG or DTS to the amplifier (or decoder). This

connection allows you to enjoy a theater-like surround

sound in your home.

Caution: Plug in this unit and other components after all connections are completed.

All connections must be correct, observing the color coding of terminals between this unit and other components.

Audio connections

m Connecting to an AV amplifier (or receiver) equipped with a Dolby Digital,

MPEG or DTS decoder, or connecting to a Dolby Digital, MPEG or DTS

decoder

Connection cord

(not included)

Main

speaker

(Left)

Center

speaker

Main

speaker

(Right)

Subwoofer

To AC

outlet

Rear (surround) speaker

(Left)

Rear (surround) speaker

(Right)

Optical fiber cable

(not included)

Connection cord

(included)

Refer to pages 14-15 for VIDEO

OUT terminal connections.

Refer to pages 14-15 for VIDEO

OUT terminal connections.

AV amplifier or receiver equipped with

a Dolby Digital, MPEG or DTS decoder

Analog audio

input terminals

This unit (U.S.A. model)

English

Connections

Notes on connecting to this unit’s OPTICAL terminal

●

Before using this terminal, remove the terminal’s cover by

pulling it.

●

Make the connection from this terminal to the optical input

terminal of an amplifier by using a commercially available

optical fiber cable.

* Use an optical fiber cable that conforms to EIAJ

standards. Other cables might not function correctly.

●

Be sure to attach the terminal’s cover when this terminal is

not being used, in order to protect the terminal from dust.

When you connect this unit’s OPTICAL or COAXIAL

terminal to the optical or coaxial digital input

terminal of the amplifier which does not include a

Dolby Digital, MPEG or DTS decoder

Use “1 Digital Output” on the SET UP menu to select the

“PCM” mode for “Dolby Digital” and “MPEG”, and select the

“OFF” mode for “DTS”. (Refer to page 59 for details.)

Digital signal output from this unit

For a DVD disc only, the format of digital signal output from this

unit can be selected by the setting of “1 Digital Output” on the

SET UP menu. (See page 59.)

For your reference:

●

Linear PCM is a signal recording format used in CDs. While

CDs are recorded in 44.1 kHz/16 bit, DVDs are recorded in

48 kHz/16 bit up to 96 kHz/24 bit.

●

If you have a Dolby Pro Logic Surround decoder or your AV

amplifier includes a Dolby Pro Logic Surround decoder, you

will obtain the full benefit of Dolby Pro Logic from the same

DVD movies that provide full 5.1-channel Dolby Digital

sound tracks, as well as from titles with the Dolby Surround

mark.

●

Digital signal for linear PCM (48 kHz 20/24 bit) will be

converted into 48 kHz 16 bit and will be output if a DVD you

play back is formatted with code scramble system

(copyright-protection).

Disc

format

Audio

format

Digital signal output from the

OPTICAL and COAXIAL

terminals of this unit

DVD

Dolby Digital

When “Disc

Original” is

selected on “1

Digital Output”

Dolby Digital

bitstream

(2–5.1ch)

PCM (2 ch)

(48 kHz/16 bit)

Video

MPEG 1

audio

PCM (2 ch)

(44.1 kHz/16 bit)

CD Linear PCM PCM (2 ch)

(44.1 kHz/16 bit)

Linear PCM

(48 kHz

16/20/24 bit)

Linear PCM (2 ch)

(48 kHz 16/20/24 bit)

Linear PCM

(96 kHz)

MPEG

(2 or 1)

audio

MPEG (2 or 1)

audio

bitstream

PCM (2 ch)

(48 kHz/16 bit)

When “PCM” is

selected on “1

Digital Output”

When “Disc

Original” is

selected on “1

Digital Output”

When “PCM” is

selected on “1

Digital Output”

DTS

DTS bitstream

No output

When “Disc

Original” is

selected on “1

Digital Output”

When “OFF” is

selected on “1

Digital Output”

Linear PCM

(2 ch) (48 kHz)

No output

When “48kHz

PCM” is

selected on “1

Digital Output”

When “OFF” is

selected on “1

Digital Output”

Terminal’s cover

Connections

This unit includes a Dolby Digital decoder. This enables the

playback of DVDs encoded with Dolby Digital without the need

for an external Dolby Digital decoder. When this unit is

connected to an AV amplifier with 6 channel input terminals,

you can enjoy theater-like surround sounds in your home when

playing back discs encoded with Dolby Digital.

Notes

•

After connections are completed, change the settings of “3

Speaker” on the SET UP menu according to your speaker

system. (See page 62.)

•

When you play back a disc recorded in 2 channel stereo, the

signals are output from the 6CH DISCRETE MAIN terminals

only.

•

You can also connect the OPTICAL or COAXIAL DIGITAL

AUDIO OUT terminal to the amplifier if the amplifier has the

corresponding digital input terminal(s).

If either of those terminals is connected to the amplifier

which does not include a Dolby Digital, MPEG or DTS

decoder, use “1 Digital Output” on the SET UP menu to

select the “PCM” mode for “Dolby Digital” and “MPEG”, and

select the “OFF” mode for “DTS”. (Refer to page 59 for

details.)

m Connecting to an AV amplifier (or receiver) equipped with 6 channel input

terminals

For China and General models only

MAIN

MIXED 2CH

VIDEO

COMPONENT VIDEO

VIDEO OUT

MODE SELECT

PAL NTSC

S VIDEO

SUB

WOOFER

CENTER

SURROUND

6CH DISCRETE

DIGITAL

VIDEO OUT SELECT

VIDEO/

S VIDEO

COMPONENT

VIDEO OUT

MPEG

DTS

COAXIAL

OPTICAL

PCM

DIGITAL

AUDIO OUT

GND

MONITOR OUT

DVD/LD TV/DBS

IN OUT

VCR

IN OUT

VCR

PHONO

DVD/LD TV/DBS

TAPE

REC

OUT

3 4

DVD/LD

TV/DBS

MAIN

R L

SURROUND

R L

CENTER

SUB

WOOFER

6CH

DISCRETE

INPUT

VIDEO

SIGNAL

TAPE

/MD

This unit (General model)

To AC outlet

AV amplifier or receiver equipped

with 6 channel input terminals

Main speaker

(Left)

Center speaker

Main speaker

(Right)

Subwoofer

Rear (surround) speaker

(Left)

Rear (surround) speaker

(Right)

Refer to pages 14-15 for VIDEO

OUT terminal connections.

English

DVD

MIXED 2CH

VIDEO

COMPONENT VIDEO

VIDEO OUT

S VIDEO

DIGITAL

VIDEO OUT SELECT

VIDEO/

S VIDEO

COMPONENT

VIDEO OUT

MPEG

DTS

COAXIAL OPTICAL

PCM

DIGITAL

AUDIO OUT

REMOTE

CONTROL

OUT IN

Amplifier

Connections

Connecting to a stereo amplifier that has neither 6 channel audio signal

input terminals nor Dolby Digital decoder

Connect this unit’s MIXED 2CH AUDIO OUT terminals to the amplifier’s audio signal input terminal printed as “DVD”, “VIDEO”,

“AUX”, etc.

6 channel audio signals encoded with Dolby Digital are mixed down into 2 channels and output from the MIXED 2CH AUDIO OUT

terminals.

Note

If you have no stereo amplifier available, you can connect this unit’s MIXED 2CH AUDIO OUT terminals to your TV’s audio signal

input terminals (if your TV is equipped with RCA type audio signal input terminals).

Refer to pages 14-15 for VIDEO

OUT terminal connections.

Refer to pages 14-15 for VIDEO

OUT terminal connections.

This unit (U.S.A. model)

For Custom Installer

For U.S.A. model only

REMOTE CONTROL (IN, OUT) terminals

These terminals are used for custom installation system.

When this unit is connected to the components for custom

installation system, you can operate this unit with the

system remote control.

Connect the REMOTE CONTROL IN terminal of this unit to

the output terminal of the central controller for custom

installation system.

By connecting the REMOTE CONTROL OUT terminal of

this unit to the REMOTE CONTROL IN terminal of the other

component, you can also operate it with the system remote

control. In this way, up to 6 components can be connected

in series.

REMOTE

CONTROL

OUT IN

Connection cord

(included)

Connections

Video connections

Connecting to an amplifier equipped with an RCA type video signal input

terminal (including an S-video input terminal)

Connect this unit’s VIDEO 1 (or 2) terminal to the amplifier’s RCA type video signal input terminal (labeled “DVD/LD” etc.).

If your amplifier has an S-video input terminal, you can connect this unit’s S VIDEO terminal to the amplifier’s S-video input terminal

by using a commercially available S-connector cable.

When the connection is made in one of these ways, be sure to set the VIDEO OUT SELECT switch to the “VIDEO/S VIDEO”

side.

This unit has two VIDEO terminals. The other terminal can be connected to another amplifier or TV.

Notes

● If your TV has an RCA type video signal input terminal

(including an S-video input terminal), this unit can be

connected to the TV directly.

● Do not connect this unit to the TV through a video cassette

recorder. Otherwise, the picture may not be played back

normally with some DVDs. This is because the copyright

protection circuit built-in this unit operates.

•

Be sure to change the setting of the VIDEO OUT

SELECT switch only when this unit is turned off or the

power cord of this unit is disconnected from the AC

outlet.

S VIDEO terminal

This unit provides you with a S VIDEO terminal in addition to

standard type VIDEO terminals.

The S VIDEO terminal transmits video signals separated into

luminance (Y) signals and color (C) signals. High quality

pictures are obtained from this terminal. In comparison with

the S VIDEO terminal, standard type VIDEO terminals

transmit “composite” video signals.

MIXED 2CH

VIDEO

COMPONENT VIDEO

S VIDEO

DIGITAL

VIDEO OUT SELECT

VIDEO/

S VIDEO

COMPONENT

VIDEO OUT

MPEG

DTS

COAXIAL OPTICAL

PCM

DIGITAL

AUDIO OUT

VIDEO OUT

VIDEO IN

S-VIDEO IN

S VIDEO

MONITOR

OUT

VIDEO

MONITOR

OUT

VIDEO IN S VIDEO IN

VIDEO OUT SELECT

VIDEO/

S VIDEO

COMPONENT

VIDEO OUT

S-video cable (not included)

TV monitor

Amplifier

TV monitor

Refer to pages 10-13

for AUDIO OUT

terminal connections.

Refer to pages 10-13

for AUDIO OUT

terminal connections.

This unit (U.S.A. model)

Connection cord

(not included)

Connection cord (included)

English

MIXED 2CH

VIDEO

COMPONENT VIDEO

S VIDEO

B PR

DIGITAL

VIDEO OUT SELECT

VIDEO/

S VIDEO

COMPONENT

VIDEO OUT

MPEG

DTS

COAXIAL OPTICAL

PCM

DIGITAL

AUDIO OUT

VIDEO OUT

VIDEO OUT SELECT

VIDEO/

S VIDEO

COMPONENT

VIDEO OUT

Connections

Connecting to a TV equipped with component video input terminals

You can connect this unit’s COMPONENT VIDEO OUT

terminals to your TV or projector, if your TV or projector has

component video signal input terminals.

The COMPONENT VIDEO OUT terminals output three types of

chrominance signals separately. By this connection, you can

enjoy high quality pictures with vivid colors.

If you make this connection, be sure to set the VIDEO OUT

SELECT switch to the “COMPONENT VIDEO OUT”

position.

Note

Do not connect this unit’s COMPONENT VIDEO OUT

terminals to component video input terminals special for HD

(High-Definition) TV.

Video connection

cords (not included)

This unit is designed for use with the NTSC and PAL

television formats. Set this switch to the position for the

format your TV monitor employs.

PAL: Set to this position if your TV monitor employs the

PAL format.

NTSC: Set to this position if your TV monitor employs the

NTSC format.

Notes

•

Be sure to change the setting of this switch only when

this unit is turned off or the power cord of this unit is

disconnected from the AC outlet.

•

If “6 Signal System Conversion” on the SET UP menu is set

to “Disc”, the setting of this switch becomes ineffective when

a DVD or Video CD disc is played back. The format

employed on the disc currently played back is automatically

selected.

MODE SELECT (PAL/NTSC) switch <China and General models only>

COMPONENT VIDEO

VIDEO OUT

MODE SELECT

PAL NTSC

S VIDEO

TV monitor

Refer to pages 10-13

for AUDIO OUT

terminal connections.

This unit (U.S.A. model)

NATURAL SOUND DVD PLAYER DVD

C900

POWER

AUTO

DISPLAY OFF

DVD

VIDEO CD

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

The On-Screen Display language of your model has been

factory preset as follows:

U.S.A. and General models: English

China model: Chinese

If you would like to change the On-Screen Display language to

another language, please refer to “OSD Language” on the

SET UP menu on page 54.

Preparations

•

If you play back a DVD or a Video CD, turn the TV on and

make some setting changes on the TV if necessary.

•

Turn on the power of your stereo system if this unit is

connected to the stereo system.

Basic playback

1 Press POWER to turn on the power.

2 Press OPEN/CLOSE to open the disc table.

3 Place discs on the trays, label side upward.

* Up to five discs can be loaded on the trays.

The trays are numbered 1 to 5.

* 8 cm (3”) discs can be played back without an adaptor.

4 Press OPEN/CLOSE to close the disc table.

* The disc on the tray 1 is ready to be played back.

Playback may begin automatically depending on some

DVDs.

* If no disc is loaded on the disc tray 1, select another

disc by following step 6.

5 If necessary, change the disc play mode (to “DISC

1” or “DISC 5”) by pressing DISC MODE on the

remote controller confirming it on the front panel

display.

When “DISC 1” is illuminated: Only a designated disc

is played back.

When “DISC 5” is illuminated: All discs on the disc

table are played back sequentially.

6 If you want to select another disc, press DISC

SKIP on the remote controller once or more, or

press DISC (1, 2, 3, 4 or 5) on the front panel.

7 Press PLAY on the remote controller

or / on the front panel to begin playback.

* Playback begins.

* You can skip this step if the disc is already played

back automatically.

When a screen menu appears on the monitor

screen, go on to step 8.

In case of DVDs with menu or Video CDs with Playback

Control, a screen menu appears on the monitor screen.

Example)

1 Sights

TITLE MENU

3 Foods

Souvenirs

2 Hotels

Basic operation

2, 4

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

Basic operation

English

8 Select the preferred item by using / / / and

then press SELECT, or select the item simply by

pressing the corresponding numeric button(s).

* Refer to page 18 for how to use the numeric buttons.

Playback of the selected

item begins.

Note

For Video CDs, only the numeric buttons can be used to

select the preferred item.

To stop playback and return to the screen menu

•

For DVDs

Press TITLE, MENU or RETURN.

(The button to be used differs depending on the disc

used.)

•

For Video CDs

Press RETURN.

To stop playback

Press STOP ( ).

* When playback is stopped, the unit memorizes the point

where STOP ( ) was pressed (Playback Resumption).

Press PLAY again, and playback will resume from this

point. When the table is opened or STOP ( ) is pressed

again, the memory will be cleared.

The Playback Resumption works only with discs for which

playing time appears on the front panel display during

playback.

This feature will not be cleared when the power is turned

off.

Note

There may be a case that the Playback Resumption does

not work depending on a part of the disc played back.

Souvenirs

1 Sights

TITLE MENU

3 Foods

Souvenirs

2 Hotels

STOP ( )

Direct playback

•

Pressing DISC (1, 2, 3, 4 or 5) on the front panel will select

the disc directly (even if the disc table is open), and

playback will begin automatically.

•

Even if the disc table is open, pressing PLAY will close the

disc table and begin playback of the disc 1.

PLAYXCHANGE

During playback, you can open the disc table by pressing

PLAYXCHANGE without interrupting playback. While

PLAYXCHANGE is working, pressing DISC SKIP has no

effect.

Note

You can load or replace discs on the trays when the disc

table is opening, however, never load a disc on the tray

hidden inside the unit. In doing so, the disc and the unit

may be damaged, because the tray already has a disc

which is being played back.

Automatic playback-starting function (for DVDs only)

If you load a disc which includes the information for automatic

playback-starting, playback starts automatically without an

operation of starting playback.

How to use the numeric buttons to select a number

(Example)

•

To select number 8.

Press “8”.

•

To select number 10

Press “+10” and “0” in succession.

•

To select number 15

Press “+10” and “5” in succession.

•

To select number 26.

Press “+10” twice, then press “6”.

Notes

•

There may be a case that appears on the monitor

screen when a button is pressed. It means that the

corresponding operation is prohibited by this unit or the disc

currently played back.

•

For DVDs and Video CDs:

The disc continues to rotate while the menu is displayed on

the monitor screen even after the playback of an item is

finished. If no further selection is to be played back, be sure

to press STOP ( ) to clear the menu.

Precautions

•

Subjecting the unit to shock or vibration can cause

mistracking.

•

Do not pull open the disc table forcibly with your hands.

•

Do not push the disc table while it is moving.

•

The temperature range for playing back discs is

recommended to be 5°C (41°F) – 35°C (95°F).

Basic operation

Front panel display information at basic playback

1 Type of the selected disc

2 Lights up the tray numbers with discs only.

3 “ ” lights up during playback and “ ” lights up when the

playback is paused.

4 Audio format of the played disc

5 Disc play mode

6 Encloses the tray number of the selected disc.

7 Shows the selected title (or track) number.

8 Shows the selected chapter (or index) number.

9 Shows the time displays. (Refer to “Switching the time

display” on pages 27 to 28.)

DVD VCD CD

PBCPGMRDM

TITLE

CHP

TIME

DISC

DOLBY

DIGITAL

678 9

23 4 5

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

English

Basic operation

m Beginning playback from a

preferred chapter (or track)

You can select and play back a preferred chapter (for a DVD)

or track (for a Video CD or CD) simply by entering its number

with the numeric buttons.

* Refer to page 18 for how to use the numeric buttons.

Note

For Video CDs only:

This operation is ineffective when this unit is in the Playback

Control mode.

For DVDs only:

Pressing “+10” may be ineffective when a title is changing. In

this case, press CANCEL and try again.

Numeric

buttons

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

m Skipping to a preferred chapter

(or track) on the disc (Skip search)

The beginning of any chapter (for DVDs) or track (for Video

CDs or CDs) can be found easily.

1 Select a disc and begin playback.

2 Press to advance or to reverse through

the title (or disc).

Press once for each chapter (or track) to be

advanced or reversed.

• Press once to advance to the next chapter (or

track).

• Press once to return to the start of the current

chapter (or track).

• Press once at the beginning of the current chapter

(or track) to return to the chapter (or track) before the

current chapter (or track).

Notes

• This function can also be performed while this unit is

stopped. Press PLAY when your desired chapter (or track)

number appears on the front panel display. Playback will

begin from the beginning of the chapter (or track).

• This function will be performed forward or backward from

any point on the title (or disc). However, it will not move

forward during playback of the final chapter (or track).

• For Video CDs only:

* This operation is ineffective when this unit is in the

Playback Control mode.

* and are used in the Playback Control mode as

the functions of “PREV” and “NEXT” respectively.

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

Playing back a preferred scene or track

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

Basic operation

m Beginning playback from a

preferred title (for DVDs) or index

number (for Video CDs/CDs)

For DVDs:

You can select any preferred title on the disc.

For Video CDs/CDs:

You can select any index number if the disc has index

numbers.

1 Press TITLE/INDEX to select the title (index) search

mode.

* “TITLE

_ _

” (or “INDEX

_ _ _

”) appears on the monitor

screen.

* Every time TITLE/INDEX is pressed, the search mode

changes as follows.

2 Enter the preferred title (or index) number with the

numeric button(s).

Playback begins from the selected number.

Note

For DVDs only:

Depending on the disc used, it may not be possible to perform

this search operation.

How to use the numeric buttons to select a number

(Example)

•

To select number 8.

Press “8”.

•

To select number 10

Press “+10” and “0” in succession.

•

To select number 15

Press “+10” and “5” in succession.

•

To select number 26.

Press “+10” twice, then press “6”.

Title (index) search

[TITLE

_ _

(INDEX

_ _ _

)]

Time search

[TIME

_ _

]

The search mode

is turned off.

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

English

Basic operation

m Beginning playback from a

preferred time point on the title (or

disc)

You can locate a preferred time point on the title (or disc) by

designating the time, and begin playback from the point or

suspend playback at the point.

1 Press TITLE/INDEX once or more to select the time

search mode.

* “TIME

_ _

” appears on the monitor screen.

* Every time TITLE/INDEX is pressed, the search mode

changes as follows.

2 Enter the preferred time with the numeric button(s).

3 Press PLAY to begin playback from the time point.

Press STILL/PAUSE to suspend playback at the

time point.

Notes

•

If the time longer than the total play time of the title (or disc)

is entered, the operation will be canceled.

•

For DVDs only:

* Depending on the disc used, it may not be possible to

perform this search operation.

* Depending on the disc used, playback may not begin from

the specified time point even when the operation have

been performed correctly.

* This search operation may be ineffective when a title is

changing. In this case, press CANCEL and try again.

•

For Video CDs only:

This search operation cannot be made when this unit is in

the Playback Control mode.

How to use the numeric buttons to enter the time

(Example)

•

To enter 45 minutes and 23 seconds

Press “4”, “5”, “2” and “3” sequentially.

•

To enter 2 hours, 15 minutes and 10 seconds

Press “2”, “1”, “5”, “1” and “0” sequentially.

Title (index) search

[TITLE

_ _

(INDEX

_ _ _

)]

Time search

[TIME

_ _

]

The search mode

is turned off.

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

Basic operation

m To advance or reverse playback

rapidly (Rapid search)

During playback, press and hold to advance

playback rapidly, and to reverse playback rapidly.

Notes

• The rapid search can also be performed while playback is

paused.

• When using or :

Be careful not to release the button just after it is pressed,

otherwise the play is skipped to the beginning of the next

chapter (or track) or returned to the beginning of the current

chapter (or track).

•

For Video CDs and CDs only:

The sound can be heard (although slightly garbled) during

the rapid search in either direction. This is convenient for

locating a precise position within the disc, or for reviewing

the contents quickly. However, no sound will be heard if the

rapid search is performed while playback is paused.

m To still picture (or suspend

playback)

Press STILL/PAUSE (or / ) during playback.

•

For DVDs/Video CDs:

This unit turns into the still picture mode.

* This operation is ineffective when playing back a still

picture which is originally contained in the disc.

•

For CDs:

This unit turns into the pause mode.

To restore normal playback

Press PLAY (or / ).

m Frame advance [ and only]

Press STILL/PAUSE repeatedly in the still picture

mode.

Picture is advanced by one frame every time the button is

pressed.

To restore normal playback

Press PLAY (or / ).

VCD

DVD

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

STILL/PAUSE

Other ways of playback

m To advance or reverse playback in

a preferred speed (Multi-speed

playback) [

and only]

You can change the playback speed in 6 steps (slowly or

rapidly).

1 Press MULTI SPEED during playback.

* This unit turns into the still picture mode.

2 If you want to reverse playback, press .

3 Press or once or more to select the desired

speed.

* Every time a button is pressed, the speed changes as

follows:

For DVDs

•

When playback is advanced

FAST 2 (The fastest advance)

FAST 1 (Fast advance)

(Standard speed)

SLOW 2 (Slow advance)

SLOW 1 (The slowest advance)

(Still)

•

When playback is reversed

FAST 2 (The fastest reverse)

FAST 1 (Fast reverse)

SLOW 1 (Slow reverse)

(Still)

For Video CDs

•

When playback is advanced

FAST 2 (The fastest advance)

FAST 1 (Fast advance)

(Standard speed)

SLOW 2 (Slow advance)

SLOW 1 (The slowest advance)

(Still)

•

When playback is reversed

FAST 2 (The fastest reverse)

FAST 1 (Fast reverse)

(Still)

Note

In the still mode, pressing advances and

reverses playback by one frame.

VCD

DVD

English

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

Basic operation

If you want to change the playback direction during

playback in a slow or rapid speed

1. Press to advance playback, or to reverse

playback.

2. Press or to select the desired speed.

To cancel the multi-speed playback mode.

Press one of the following buttons.

•

On the remote controller:

PLAY, MULTI SPEED, STILL/PAUSE,,

•

On the front panel:

/ , ,

•

Press STOP ( ).

Notes

•

No sound will be heard during this operation.

•

For Video CDs, reverse playback cannot be made in slow

speed and also by one frame.

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

STILL/PAUSE

PLAY

MULTI SPEED

STOP ( )

English

Basic operation

m Operations unique for a Video CD

in the Playback Control mode

[

only]

If “PBC” is illuminated on the front panel display when a Video

CD is played back, this unit is in the Playback Control mode. In

this mode, a screen menu appears on the monitor screen after

the playback begins.

To select the preferred item on a screen menu

Press the corresponding numeric button(s). The

Playback of the item begins.

* Refer to page 18 for how to use the numeric buttons.

If the disc has two or more menus;

Press to go on to the next menu.

(Press to return to the previous menu.)

* For some discs, the next screen menu may appear before

beginning playback. In that case, select the preferred item

again.

To skip to the preferred item (or screen menu)

during playback (or being paused)

•

Pressing locates the beginning of the next item or the

next screen menu.

•

Pressing locates the beginning of the previous item or

the previous screen menu.

To return to the previous screen menu

Press RETURN.

* To return to the first screen menu, press RETURN

repeatedly until the first menu appears.

Note

Disc play in the Playback Control mode depends on the data

of the disc used. So, depending on the contents of disc, the

above operating method may not be applied to the disc.

Be sure to refer to the instruction manual for the disc.

To enjoy Video CDs with the Playback Control

turned off

•

Change the setting of “1 Playback Control” on the SET UP

menu to “OFF”. Refer to page 52 for details.

Video CDs can be played back in normal playback mode.

•

When playback is stopped in the Playback Control mode,

making a track search operation cancels the Playback

Control mode.

VCD

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

Numeric

buttons

RETURN

5 Roma

4 Paris

3 London

2 Los Angeles

1 New York

10 Tokyo

9 Sydney

8 Peking

7 Hong Kong

6 Montreal

m Changing the audio output mode

(to enjoy using a multisound disc

etc.) [

and only]

You can change the output mode of the MIXED 2CH left and

right audio output terminals of this unit. This operation is useful

when playing back a multisound karaoke disc etc.

This setting also applies to the 6CH DISCRETE MAIN left

and right audio output terminals.

Press AUDIO once or more.

* Every time AUDIO is pressed, the output mode changes.

The current output mode is displayed on the monitor screen

and the mode changes among “L”, “R” and “Stereo”.

L Outputs sound signals of the left channel

only from both left and right terminals.

R Outputs sound signals of the right channel

only from both left and right terminals.

Stereo Outputs sound signals of the left channel

from the left terminal, and outputs sound

signals of the right channel from the right

terminal.

Factory default setting: Stereo

Notes

●

This operation also applies to the output mode of the

OPTICAL and COAXIAL DIGITAL output terminals of this

unit.

●

This operation is only effective when playing back a Video

CD or CD.

●

The output mode is always returned to “Stereo” when you

turn on this unit.

VCD

Basic operation

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

AUDIO

English

Switching the time display

DVD VCD CD

PBC RDM

TITLE

PCM

CHP

TIME

DISC

DVD VCD CD

PBC RDM

TITLE

PCM

CHP

TIME

DISC

REMAIN

DVD VCD CD

PBC RDM

TITLE

PCM

CHP

TIME

DISC

TOTAL

DVD VCD CD

PBC RDM

TITLE

PCM

CHP

TIME

DISC

TOTAL

REMAIN

Every time TIME is pressed, the front panel display

changes as described below.

For DVDs:

[Example]

When the second chapter of the first title is being played back.

(Refer to the illustration on the left.)

➀ The elapsed play time for the chapter being played back

will be displayed.

* 8 seconds have passed from the beginning of the

second chapter.

➁ The remaining play time for the current chapter will be

displayed.

* 10 minutes and 58 seconds remain to the end of the

second chapter.

➂ The elapsed play time of the title being played back will be

displayed.

(If the unit is in the program play mode, the total elapsed

play time of the programmed selections will be displayed.)

* 1 hour, 23 minutes and 45 seconds have passed from

the beginning of the title.

➃ The remaining play time for the current title will be

displayed. (If the unit is in the program play mode, the total

remaining play time of programmed selections will be

displayed.)

* 1 hour and 41 seconds remain to the end of the title.

Note

During random play, only the elapsed play time and remaining

play time of the current title will be displayed.

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

SKIP/SEARCH

TIME

Displaying various information

For Video CDs/CDs:

[Example]

When the second track is being played back. (Refer to the

illustration on the left.)

➀ The elapsed play time for the track being played back will

be displayed.

* 8 seconds have passed from the beginning of the

second track.

➁ The remaining play time for the current track will be

displayed.

* 2 minutes and 58 seconds remain to the end of the

second track.

➂ The elapsed play time of the disc being played back will be

displayed.

(If the unit is in the program play mode, the total elapsed

play time of the programmed selections will be displayed.)

* 45 minutes and 23 seconds have passed from the

beginning of the disc 2.

➃ The remaining play time for the current disc will be

displayed. (If the unit is in the program play mode, the total

remaining play time of programmed selections will be

displayed.)

* 41 minutes remain to the end of the disc 2.

Notes

● During random play, only the elapsed play time and

remaining play time of the current track will be displayed.

● When the selected Video CD is in the Playback Control

mode (“PBC” is illuminated on the display), only the elapsed

play time of the current track will be displayed.

VCD CD

PBC RDM

TRACK

PCM

INDEX

TIME

DISC

VCD CD

PBC RDM

TRACK

PCM

INDEX

TIME

DISC

REMAIN

VCD CD

PBC RDM

TRACK

PCM

INDEX

TIME

DISC

TOTAL

VCD CD

PBC RDM

TRACK

PCM

INDEX

TIME

DISC

TOTAL

REMAIN

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

SKIP/SEARCH

TIME

English

This unit features the OSD (On Screen Display) function to

show various information about the current status of this unit

and the selected disc on the monitor screen.

To call the OSD screen

Press ON SCREEN.

* Every time this button is pressed, the display type changes

as shown below.

Type 1 Type 1 and 2 Type 1 and 3

OSD is canceled.

Notes

● The OSD screen cannot be called when the monitor shows

the program sequence setting mode.

● This unit may not identify some information on the disc

depending on the disc or the mode of this unit. Such

information is shown by “–” or a blank.

→→

→

Displaying various information

On Screen Display

1 The currently selected disc number

2 The type of the current disc (DVD, VCD or CD)

3 The current title number or track number

4 The current chapter number (C00) or index number (I00)

5 The angle icon is shown during playing back a scene of a

DVD source which includes two or more angles of view.

6 Time display

The time display mode selected by pressing TIME is

shown.

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

ON SCREEN

DVD PROGRAMD3 T99 C 99 1 : 2 3 : 4 5

1 2 3 4 5 6

Type 1

CHAPTER 0:00:00

The current chapter’s elapsed time

CHAPTER – 0:00:00

The current chapter’s remaining time

TRACK 0:00:00

The current

track’s elapsed time

TRACK – 0:00:00

The current

track’s remaining time

TITLE 0:00:00

The current

title’s elapsed time

TITLE – 0:00:00

The current

title’s remaining time

DISC 0:00:00

The current

disc’s elapsed time

DISC – 0:00:00

The current

disc’s remaining time

PROGRAM 0:00:00 Program’s elapsed time

PROGRAM – 0:00:00 Program’s remaining time

Display description

1 The total playing time of the current disc.

2 Shows whether the analog AUDIO OUT terminals output

signals (Output) or not (Muted).

3 The audio format A and the format of the digital signals B

output to the OPTICAL and COAXIAL DIGITAL AUDIO

OUT terminals

4 The output mode of the left and right channels is shown.

Stereo........Left and right channels

L.................Left channel only

R................Right channel only

5 For Video CDs only:

The version of the current video CD (2.0 or 1.1)

6 For Video CDs only:

Shows whether the Playback Control is ON or OFF.

For Video CDs/CDs

Disc Total Time 1 : 11 : 23

Analog Audio Output Output

VCD Version 2.0

Digital Audio Output PCM

L/R Mode Stereo

Playback Control ON

44.1 kHz 16 bit

Displaying various information

1 The total playing time of the current title.

2 Shows whether the analog AUDIO OUT terminals output

signals (Output) or not (Muted).

3 The audio format A and the format of the digital signals

B output to the OPTICAL and COAXIAL DIGITAL AUDIO

OUT terminals

4 The current audio language and its number

5 The audio format of the source

6 The current subtitle language and its number, and the

setting of subtitle (ON or OFF)

7 The current angle number is shown during playing back a

scene of a DVD source which includes two or more angles

of view.

* If the scene has only one angle of view, “--” is shown.

For DVDs

Title Total Time 1 : 2 3 : 4 5

Analog Audio Output Output

Audio Format Dolby Digital 5.1 ch

OFF

Digital Audio Output PCM

Audio Language 1 English

Subtitle Language

Angle

2 English

48 kHz 16 bit

Type 2

English

The types of discs on the disc table are shown for each tray number.

*1: Shows that this unit has not identified the type of the disc on the tray 2

because the disc had never been selected before.

Displaying various information

Disc 1 DVD

Disc 2 Unidentified

Disc 5 CD

Disc 3 VCD

Disc 4 No Disc

Type 3

Repeat play

Advanced operation

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

All discs, an entire disc, a single title or track, a sequence of

programmed selections, or a sequence of random play

selections can be continuously repeated.

Depending on some discs, the designated repeat play may not

be performed

1 Press S/F REPEAT once or more to select the

desired repeat play mode (REP S or REP F).

2 Press PLAY.

Repeat play modes

SINGLE REPEAT (REP S)

A single title or track is played back repeatedly.

* This is also available in the program play mode and the

random play mode. (If the repeat play mode is switched off,

the program play mode or the random play mode will be

resumed.)

FULL REPEAT (REP F)

When “DISC 1” is illuminated on the front panel display:

A designated disc is played back repeatedly.

* In the random play mode, the selected disc is repeatedly

played back, but the order of titles or tracks is different every

time.

When “DISC 5” is illuminated on the front panel display:

All discs on the disc table are played back repeatedly.

* In the random play mode, the random play is performed

among all discs and repeated with a different order of titles or

tracks every time.

Note

In the program play mode, a sequence of programmed titles or

tracks is played back repeatedly.

To cancel the repeat play

Press S/F REPEAT once or more so that “REP (S, F)”

goes off from the front panel display.

REP

(off)

English

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

The section between two points you specify on a disc is

repeatedly played back.

1 During playback, press A-B at the point where you

want to begin the repeat play.

2 Press A-B again at the point where you want to end

the repeat play.

To cancel the A-B repeat play mode

Press A-B again.

* Pressing some other buttons may cancel the A-B repeat play

mode.

Notes

• In the program play mode, the A-B repeat play can be made

within a programmed title or track.

• For DVDs;

The A-B repeat play is effective only while playing back a

moving picture. On some titles, the A-B repeat play may not

work.

• For Video CDs;

When this unit is in the Playback Control mode, the A-B

repeat play is effective only while playing back a moving

picture.

Flashes.Lights up.

Lights up.

Advanced operation

REP

1, 2

Repeat play between specified two points (A-B repeat play)

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

Advanced operation

You can program desired titles of DVDs and tracks of Video

CDs/CDs on the disc table in any desired order. Any title or

track can be programmed as one selection.

Up to 40 selections can be programmed in a sequence.

1 Press PROG when this unit is stopped.

* “PGM” and “P-01” will light up on the front panel display.

2 If necessary, select the desired disc by pressing

DISC SKIP (or DISC 1–5).

3 Use the numeric buttons to select the preferred title

or track number.

* The selected title (or track) number, the total play time

of the programmed titles (or tracks) etc. can be checked

on the monitor screen and the front panel display.

4 Repeat steps 2 and 3 for any other title or track. Up

to 40 selections can be programmed.

5 Press PLAY to start playback of the programmed

selections.

When playback of all the programmed selections is

completed

This unit stops with the program play mode uncanceled.

• Press PROG to cancel the program play mode.

• Press PLAY to begin playing back the same programmed

selections again.

To delete a title or track already programmed

1. If during playback, press STOP ( ).

* If during programming, skip to step 4.

2. Press STOP ( ) again.

* The program play mode is canceled.

3. Press PROG.

* The list of the program data is shown on the monitor

screen. (Refer to page 35 for details.)

4. Select the title or track you want to delete by pressing

/// .

5. Press CANCEL.

How to use the numeric buttons to select a number

(Example)

•

To select number 8.

Press “8”.

•

To select number 10

Press “+10” and “0” in succession.

•

To select number 15

Press “+10” and “5” in succession.

•

To select number 26.

Press “+10” twice, then press “6”.

Program play

CANCEL

STOP ( )

English

Advanced operation

Notes

• You can program a whole disc by pressing “0”, instead of

one title or one track. At that time, “AL” flashes on the front

panel display.

• If you program a track of a Video CD (ver. 2.0), the Playback

Control is canceled during the program play.

• Programming is possible only when this unit is stopped.

• There may be some cases that this unit cannot display the

total time of the programmed selections.

• Skip search can be performed during playback.

* Pressing once locates the beginning of the title (or

track) of the next program sequence number.

* Pressing once locates the beginning of the current

title (or track), and pressing twice locates the

beginning of the title (or track) of the previous program

sequence number.

• If you program a title or track which does not exist or

unavailable on the disc, or you program a title or track on an

unavailable disc, the title or track will be skipped during

program play.

• If a button which does not work in the program play mode is

pressed, appears on the monitor screen and the

operation is invalid.

DVD VCD CD

PBCPGMRDM

TRACK

TITLE

DISC

TOTAL

TIME

DISC

TOTAL

Display information during programming

Every time you program a title or track, the total playing time is shown for about one second in place of the program sequence

number.

Front panel display

Monitor screen

Selected title or track number

Lights up either indicator depending

on the type of the selected disc.

Program sequence numberSelected disc number Total playing time

Program Sequence

1 - 1

1 - 2

1 - 3

1 - 4

1 - 5

1 - 6

2 - 3

2 - 4

2 - 5

2 - 6

4 -AL

2 - 8

2 - 9

2 - 10

3 - 5

Quit

No. 1 Total Time 1 : 2 3 : 4 5

Play DeletePROG PLAY CANCEL

4321 5 6

1 Disc number of the selected title or

track.

2 Title or track number

3 “AL” is displayed when “0” is entered to

select all titles or tracks on the disc as

one selection.

4 Program sequence number of the

currently selected title or track.

5 Only “–” is displayed for a program

sequence number to which no selection

is programmed.

6 Total play time of the programmed

selections

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

To stop program play

Press STOP ( ).

* This unit memorizes the point where STOP ( ) was

pressed (Playback Resumption).

Press PLAY to resume playback from that point.

To cancel the program play mode (and restore the

normal play mode)

There are several methods. The following are some of them.

• Press STOP ( ) or PROG when the program play is

stopped with the point to resume playback memorized.

• Press DISC SKIP or DISC (1–5).

Note: These operations will not delete the program data.

Press PROG again to restore the program play mode.

To check and correct program data

1. If during playback, press STOP ( ).

* This unit memorizes the point where STOP ( ) was

pressed.

2. Press STOP ( ) again.

* The program play mode is canceled.

3. Press PROG.

* The list of the program data is shown on the monitor

screen. (Refer to page 35 for details.)

4. If you want to correct an already programmed selection,

select it by pressing

/// .

5. Select a new title (or track) you want to reprogram.

* Select the disc number by using DISC SKIP or DISC

(1–5) and select the title (or track) number by using the

numeric buttons.

* The already programmed title (or track) will be cleared

from the memory and the new one will be programmed.

6. If you correct more selections, repeat step 5.

7. When the check or correction is finished, press PLAY.

To clear all program data

• Open the disc table by pressing OPEN/CLOSE or

PLAYXCHANGE.

• Follow steps 1 to 3 of “To check and correct program data”

described above, and then press and hold CANCEL for

more than 3 seconds.

/ (PLAY)

CANCEL

DISC SKIP

Numeric

buttons

PROG

OPEN/CLOSE

PLAYSTOP ( )

Advanced operation

///

PLAYXCHANGE

DISC (1–5)

OPEN/CLOSE

12345

DISC

PLAYXCHANGE

OPEN/CLOSE

SKIP/

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

English

Advanced operation

Titles or tracks of a designated disc or all discs on the disc

table are played back in a random order.

1 If necessary, switch the disc play mode (to “DISC 1”

or “DISC 5”) by pressing DISC MODE confirming it

on the front panel display.

When “DISC 1” is illuminated: Titles or tracks of the

selected disc are played back in a random order.

When “DISC 5” is illuminated: Titles and tracks of all

discs on the disc table are played back in a random

order.

* If “DISC 1” is selected, select the desired disc by

pressing DISC SKIP or DISC (1–5).

2 Press RANDOM to begin the random play.

* The “RDM” indicator lights up.

When playback of all the random selections is completed

This unit stops and returns to the normal playback mode.

To stop random play

1. Press STOP ( ).

* This unit memorizes the point where STOP ( ) was

pressed (Playback Resumption).

Press PLAY, and playback will resume from that point.

2. Press STOP ( ) again. The random play mode is

canceled.

To cancel the random play mode (and restore the

normal play mode)

There are several methods as described below.

● Press RANDOM.

● Press STOP ( ) while the random play is stopped with

the point to resume playback memorized.

● Press OPEN/CLOSE.

● Perform the title (or track) or time search operation.

* When the search is successfully executed, the random

play mode will be canceled.

Notes

● This feature will not function in the program play mode.

● If a track of a Video CD (ver. 2.0) is selected, the Playback

Control mode is canceled.

● Skip search, rapid advance and rapid reverse operations

can be performed during random play (or while random

play is paused) within the range of the random selections.

● Pressing PLAYXCHANGE will not disturb the random play

mode if the disc play mode is in “DISC 1”.

In “DISC 5” mode, however, pressing PLAYXCHANGE will

clear the random selections from discs other than the

currently selected disc. If the disc table is closed, the

random play continues with the selections from those discs

renewed.

PLAY

STOP ( )

/ (PLAY)

Random play

Advanced operation

When you play back a disc on which subtitles are recorded,

you can turn on or off displaying subtitles on the monitor

screen as you prefer.

Moreover, if subtitles are recorded in two or more languages

on the disc, you can select the preferred subtitle language.

To turn on/off the display of subtitles

Every time ON/OFF is pressed, the display of subtitles

turns on and off alternately.

To change the subtitle language

Press SUBTITLE during playback repeatedly until the

preferred language is displayed.

(Example)

Notes

● Subtitles cannot be displayed on the monitor screen if

subtitles are not recorded on the disc being played back.

● Some discs are recorded with subtitles which cannot be

turned off.

● Depending on some discs, the subtitle language cannot be

changed though two or more languages are recorded on the

disc.

● Recorded subtitle languages differ with disc. Refer to the

jacket of the disc for the information about subtitle

languages etc.

Changing subtitle language [ only]

DVD

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

SUBTITLE

ON/OFF

I love you.

Je t’aime

English French

......

SUBTITLE 1 English ON

SUBTITLE 2 French ON

Shows the

number of the

subtitle

language being

selected for

about 3

seconds.

English

Advanced operation

When you play back a disc on which two or more audio sound

track languages are recorded, you can select the desired audio

sound track language.

Press AUDIO during playback repeatedly until the

preferred language is selected.

(Example)

Notes

● Depending on some discs, the audio sound track language

cannot be changed though two or more languages are

recorded on the disc.

● Recorded audio sound track languages differ with discs.

Refer to the jacket of the disc for the information about audio

sound track languages etc.

Changing audio sound track language [ only]

DVD

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

AUDIO

Hello

Bon jour

AUDIO 1 English DolbyDigital

AUDIO 2 French DolbyDigital

Shows the

number of the

audio sound

track language

being selected

for about 3

seconds.

Advanced operation

Some discs with movies, for example, may be available with

two or more titles. If the disc has a title menu recorded on it,

you can select the preferred movie title.

(The details of operation differ depending on the disc used.)

1 Press TITLE during playback.

* A list of the titles on the disc is displayed on the monitor

screen.

2 Select the preferred title by pressing ///,

and then press SELECT [or simply by pressing the

numeric button(s)].

To clear the title menu

Press TITLE again.

* Playback resumes from the scene when TITLE was first

pressed.

(Example)

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

Using a title menu [ only]

DVD

1 Sights

TITLE MENU

3 Foods

Souvenirs

2 Hotels

Souvenirs

1 Sights

TITLE MENU

3 Foods

Souvenirs

2 Hotels

Playback begins

from the selected

title.

English

Some DVDs have unique menus called DVD menus. For

example, DVDs programmed with complex contents provide

guide menus, and those recorded with various languages

provide menus for audio and subtitle languages. DVD menu’s

contents and operation differ depending on the disc used. The

following explains basic operation when this feature is used.

1 Press MENU during playback.

* The DVD menu available on the disc is displayed on the

monitor screen.

2 Select the preferred item by pressing ///,

and then press SELECT [or simply by pressing the

numeric button(s)].

Playback begins from the selected item.

When the menu continues onto another screen.

Repeat step 2.

To clear the menu

Press MENU again.

* Playback resumes from the scene when MENU was first

pressed.

(Example)

Advanced operation

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

Using a DVD menu [ only]

DVD

3. ANGLE

2. AUDIO

1. SUBTITLE

DVD MENU

3. ANGLE

2. AUDIO

1. SUBTITLE

DVD MENU

Advanced operation

Some DVDs may contain scenes which have been shot from

two or more angles simultaneously. For these discs, the same

scene can be viewed from each of these different angles using

the ANGLE button. (The recorded angles differ depending on

the disc used.)

Press ANGLE during playback repeatedly until the

preferred angle is selected.

(Example)

Notes

● This function works only for discs which have scenes shot

from two or more angles.

● Scenes recorded in two or more angles, the number of

angles etc. differ with discs.

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

Viewing from another angle [ only]

DVD

ANGLE

ANGLE 1

ANGLE 2

ANGLE 3

Shows the

number of the

angle currently

selected.

English

DVD

TV Type Normal 4:31

Display Mode Letter Box2

Menu Language English3

Subtitle Language Auto

Quit

Audio Language English5

Rating Level OFF6

VCD Settings Display Audio

Set

DVD

SETUP SELECT

This unit provides you with the following items to determine the initial status of this unit.

When you first use this unit, check the factory default settings of all the items. If the settings of some items are not suitable for using

this unit in your Audio/Video system, change the settings of them.

Once the settings are changed, this unit can always be operated under the same conditions.

The settings will be retained in the memory until the settings are changed even if the power is turned off.

Initial settings (on the SET UP menu)

: Provided only for China and General models.

SET UP groups

* The currently selected SET UP group is highlighted.

The currently selected SET UP

group is shown here.

Items

Item

1 TV type

2 Display Mode

3 Menu Language

4 Subtitle Language

5 Audio Language

6 Rating Level

1 Playback Control

1 Guide Display

2 OSD Language

3 Background Screen

4 Screen Saver

5 FL Dimmer

6 Signal System Conversion*

1 Digital Output

2 Dynamic Range Control*

3 Speaker*

SET UP group

DVD Settings

VCD Settings

Display Settings

Audio Settings

SET UP menu on the monitor screen

Check and change the settings on the monitor screen.

The current settings

Items

Initial settings (on the SET UP menu)

1 Turn on this unit and the TV monitor, and load discs.

2 Press SET UP when this unit is stopped.

* The SET UP menu appears on the monitor screen.

3 Press or to select the preferred SET UP

group.

4 Press or to select the preferred item, and then

press SELECT.

The display on the monitor screen changes to the mode

for setting change.

The current selection is indicated by “

” at the head.

5 Press or to change the selection, and then

press SELECT.

* Some items require additional steps. (See the

respective pages.)

6 When the setting change is finished, press RETURN

(or ) once or more to return to the previous

display.

7 Repeat steps 3 to 6 for other items.

To return to the previous display

Press RETURN or .

To clear the SET UP menu

Press SET UP.

To restore the factory default settings for all items

While holding CANCEL on the remote controller

pressed, press and hold on the front panel for more

than 5 seconds.

For your reference:

The numeric buttons can also be used for a setting change

instead of

or . In this case, pressing SELECT is not

necessary.

Note

If the SET UP menu is displayed during playback, you may not

be able to change settings on some items. To change them,

stop this unit.

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

Common procedure for setting change

4, 5

English

Initial settings (on the SET UP menu)

DVD Settings

The items in this group are only applicable when playing back

a DVD.

1 TV Type

Select the appropriate screen type according to your TV

monitor; conventional size screen (Normal 4:3) or wide-screen

(Wide 16:9).

1 When the SET UP group “DVD Settings” is selected,

press or to select “1 TV Type” and then press

SELECT.

2 Press or to select the preferred type (1 or 2)

and then press SELECT.

1 Normal 4:3 Select this type when a conventional

TV monitor is connected.

* When this type is selected, the

setting of the next item “2 Display

Mode” also becomes important.

(Refer to the next page.)

2 Wide 16:9 Select this type when a wide-screen

TV monitor is connected.

* A video source of wide-screen type

is played in full size. (The TV must

also be set to the full size display

mode.)

Factory default setting: Normal 4:3

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

Item description and setting change

1, 2

DVD

TV Type Normal 4:31

Display Mode Letter Box2

Menu Language English3

Subtitle Language Auto4

Audio Language English5

Rating Level OFF6

VCD Settings Display AudioDVD

DVD

Normal 4:31

Wide 16:92

Settings TV Type

2 Display Mode

If “Normal 4:3” is selected on the item “1 TV Type”, select the

display mode (Letter box or Pan & Scan) for a video source of

wide screen type.

1 When the SET UP group “DVD Settings” is selected,

press or to select “2 Display Mode” and then

press SELECT.

2 Press or to select the preferred mode (1 or 2),

and then press SELECT.

1 Letter Box A video source is played back in the

letter box style. (Black bands appear

at the top and bottom of the screen.)

2 Pan Scan A video source formatted in the Pan

& Scan style is played back in that

style. (The left and right edges are cut

off.)

* A video source not formatted in the

Pan & Scan style will be played back

in the letter box style.

Factory default setting: Letter Box

Initial settings (on the SET UP menu)

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2

DVD

TV Type Normal 4:31

Display Mode Letter Box2

Menu Language English3

Subtitle Language Auto4

Audio Language English5

Rating Level OFF6

VCD Display Audio

Settings DVD

DVD

Letter Box1

Pan Scan2

Settings Display Mode

English

3 Menu Language

Select the language which is used to show title menus or DVD

menus when playing back a DVD.

1 When the SET UP group “DVD Settings” is selected,

press or to select “3 Menu Language” and

then press SELECT.

2 Press or to select the preferred language and

then press SELECT.

Factory default setting

U.S.A. and General models: English

China model: Chinese

Note

If you play back a disc which does not have the selected

language, the priority language on the disc is used.

Initial settings (on the SET UP menu)

DVD

TV Type Normal 4:31

Display Mode Letter Box2

Menu Language English3

Subtitle Language Auto4

Audio Language English5

Rating Level OFF 6

VCD Settings Display Audio

DVD

Disc1 Others9

English2

Japanese3

Chinese4

Spanish5

French6

German7

Italian8

Settings Menu Language

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2

1 Disc:

2 English

3 Japanese

4 Chinese

5 Spanish

6 French

7 German

8 Italian

9 Others:

The priority language on the disc.

Another language can be selected by

entering the code number for the

language. (See the left for details.)

Entering a language code number

After you select “Others”, press SELECT.

*“Language Code” appears on the monitor screen.

2 Enter a 4-digit number by using the numeric buttons.

(Refer to “Language code list” on page 67 for the

number of the desired language.

(Example: “8084”)

3 Press SELECT.

Note: In step 1, if a language code is already set, it is

shown as “Others 6565 (for example)”. If you wish to

change the code number, follow steps 2 and 3.

Language Code 8 0 8 4

4 Subtitle Language

Select the language which is used to show subtitles when

playing back a DVD.

1 When the SET UP group “DVD Settings” is selected,

press or to select “4 Subtitle Language” and

then press SELECT.

2 Press or to select the preferred language and

then press SELECT.

Factory default setting: Auto

Notes

● If you play back a disc which does not have the selected

language, the priority language on the disc is used.

● You can also change the subtitle language, or turn off or on

subtitles by using SUBTITLE and OFF/ON only while playing

back a disc on which two or more subtitle languages are

recorded. (Refer to page 38 for details.)

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2

Initial settings (on the SET UP menu)

DVD

TV Type Normal 4:31

Display Mode Letter Box2

Menu Language English3

Subtitle Language Auto4

Audio Language English5

Rating Level OFF6

VCD Settings Display Audio

DVD

Auto1 Italian9

Others10

OFF2

English3

Japanese4

Chinese5

Spanish6

French7

German8

Settings Subtitle Language

1 Auto:

2 OFF:

3 English

4 Japanese

5 Chinese

6 Spanish

7 French

8 German

9 Italian

10 Others:

The language is automatically selected

according to the setting on the item “5

Audio Language” (on page 49).

(See the left for details.)

Subtitles are not displayed.

Another language can be selected by

entering the code number for the

language. (Refer to “Entering a language

code number” on page 47 for details.)

When “1 Auto” is selected in step 2, the subtitle

language is automatically selected as follows.

● When the disc is played back with the audio language

selected on the item “5 Audio Language” (on page 49),

the subtitles of the same language are selected and the

display of them is turned off.

● When the disc is not played back with the audio language

selected on the item “5 Audio Language” (on page 49)

because the language is not recorded on the disc:

* If the disc has the subtitles of the same language, the

subtitles are displayed.

* If the disc does not have the subtitles of the same

language, the subtitles are displayed with the priority

language on the disc.

English

5 Audio Language

Select the language which is used for audio sound track when

playing back a DVD.

1 When the SET UP group “DVD Settings” is selected,

press or to select “5 Audio Language” and

then press SELECT.

2 Press or to select the preferred language, and

then press SELECT.

Factory default setting

U.S.A. and General models: English

China model: Chinese

Notes

● If you play back a disc which does not have the selected

language, the priority language on the disc is used.

● You can also change the audio sound track language by

using AUDIO only while playing back a disc on which two or

more audio sound track languages are recorded. (Refer to

page 39 for details.)

Initial settings (on the SET UP menu)

DVD

TV Type Normal 4:31

Display Mode Letter Box2

Menu Language English3

Subtitle Language Auto4

Audio Language English5

Rating Level OFF6

VCD Settings Display AudioDVD

DVD

Italian

Others

English

Japanese

Chinese

Spanish

French

German

Settings Audio Language

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2

1 English

2 Japanese

3 Chinese

4 Spanish

5 French

6 German

7 Italian

8 Others:

Another language can be selected by

entering the code number for the

language. (Refer to “Entering a language

code number” on page 47 for details.)

6 Rating Level

Some DVDs are encoded with restriction of playback for

scenes unsuitable for children. The level of restriction (rating

level) differs depending on the contents of discs. On this item,

you can set the rating level to the desired level. When you play

back a DVD encoded with the rating level, only the picture

which conforms to the level set on this item is played back.

The level you set on this item is locked and unchangeable

without entering the password you designate. This is for

preventing the level from being changed by someone other

than you.

1 When the SET UP group “DVD Settings” is selected,

press or to select “6 Rating Level”, and then

press SELECT.

2 Enter a 4-digit number as the password by using the

numeric button(s), and then press SELECT.

(Example: “4343”)

Note

Do not forget your password.

In the future, if you want to change the rating level, you

must enter the password correctly in this step, otherwise

you cannot go on to the next step.

* In this case, the password you enter is shown as “

****

”.

Initial settings (on the SET UP menu)

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2

DVD

TV Type Normal 4:31

Display Mode Letter Box2

Menu Language English3

Subtitle Language Auto4

Audio Language English5

Rating Level OFF6

VCD Settings Display Audio

DVD

To set Rating Level, choose an entry password.

Password

––––

Password 4343

English

3 Press or to select the preferred level, and then

press SELECT.

Factory default setting: OFF

4 Press SELECT.

To change the rating level

Follow the procedure above. However, it cannot be changed

unless the password you designated is not entered correctly in

Step 2.

To clear the password and unlock this item

Holding CANCEL pressed, press STOP ( ) 3 times

continuously.

Notes

●

In the following cases, the display on the monitor screen

changes to allow you to change the level temporarily for

playing back the currently selected disc.

The selected disc cannot be played back in the current

rating level.

The selected disc demands to change the level.

●

For discs encoded with no rating level information, the rating

level set on this item has no effect.

Initial settings (on the SET UP menu)

DVD

Level 11 OFF9

Level 22

Level 33

Level 44

Level 55

Level 66

Level 77

Level 88

Settings Rating Level

1 Level 1

2 Level 2

3 Level 3

4 Level 4

5 Level 5

6 Level 6

7 Level 7

8 Level 8

9 OFF

Restriction is the severest.

Restriction becomes easier.

Restriction is the easiest.

All DVDs can be played back.

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

3, 4

Note for US customers

The restrictions applied to movies in U.S.A. correspond to the

following rating levels.

Restriction Rating level

G Level 1

PG Level 3

PG-13 Level 4

R Level 6

NC-17 Level 7

VCD Settings

The item in this group is only effective when playing back a

Video CD.

1 Playback Control

Select whether the Playback Control works or not when

playing back a Video-CD, ver. 2.0.

1 When the SET UP group “VCD Settings” is selected,

press or to select “1 Playback Control”, and

then press SELECT.

2 Press or to select ON or OFF, and then press

SELECT.

1 ON The Playback Control works when a Video-

CD, ver. 2.0 is played back.

2 OFF The Playback Control does not work even

when a Video-CD, ver. 2.0 is played back.

Factory default setting: ON

Initial settings (on the SET UP menu)

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2

VCD

Playback Control ON1

VCD Settings Display AudioDVD

VCD

ON1

OFF 2

Settings Playback Control

English

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2

Display Settings

The items in this group controls the ways of displaying

information on the monitor screen and the front panel display.

1 Guide Display

Select whether or not the monitor screen shows the operation

guide information or other messages.

1 When the SET UP group “Display Settings” is

selected, press or to select “1 Guide Display”,

and then press SELECT.

2 Press or to select the preferred mode, and

then press SELECT.

1 ON Select this to show the operation guide

information and other messages.

2 Brief Select this to show the following icons only.

: Means that the current operation is

prohibited by the disc or this unit, so

the operation is invalid.

: Means “Warning”.

3 OFF Select this to show no operation guide

information and no message on the monitor

screen.

Factory default setting: ON

Initial settings (on the SET UP menu)

Display VCD Settings Display AudioDVD

Guide Display ON1

OSD Language English2

Background Screen Picture 13

Screen Saver ON4

FL Dimmer Normal5

Display

ON1

Brief2

OFF3

Settings Guide Display

2 OSD Language

Select the language for displaying the OSD (On Screen

Display) information.

1 When the SET UP group “Display Settings” is

selected, press or to select “2 OSD

Language”, and then press SELECT.

2 Press or to select the preferred language, and

then press SELECT.

1 English

2 Japanese

3 Chinese

Factory default setting

U.S.A. and General models: English

China model: Chinese

Initial settings (on the SET UP menu)

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2

Display VCD Settings Display AudioDVD

Guide Display ON1

OSD Language English2

Background Screen Picture 13

Screen Saver ON4

FL Dimmer Normal5

Display

English1

Japanese2

Chinese3

Settings OSD Language

English

3 Background Screen

Select a background image or color to be shown on the

monitor screen when no video source is reproduced on the

monitor.

1 When the SET UP group “Display Settings” is

selected, press or to select “3 Background

Screen” and then press SELECT.

2 Press or to select the preferred type, and then

press SELECT.

1 Picture 1 Wallpaper type 1

2 Picture 2 Wallpaper type 2

3 Blue Blue background

4 Black Black background

Factory default setting: Picture 1

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2

Initial settings (on the SET UP menu)

Display VCD Settings Display AudioDVD

Guide Display ON1

OSD Language English2

Background Screen Picture 13

Screen Saver ON4

FL Dimmer Normal5

Display

Picture 11

Picture 22

Blue3

Black4

Settings Background Screen

4 Screen Saver

You can select whether to use the built-in screen saver or not.

1 When the SET UP group “Display Settings” is

selected, press or to select “4 Screen Saver”,

and then press SELECT.

2 Press or to select ON or OFF, and then press

SELECT.

1 ON The screen saver will activate automatically

after five minutes laps with this unit stopped.

2 OFF The screen saver will not activate in any

status of this unit.

Factory default setting: ON

Note

When the screen saver is working on the TV monitor, pressing

any button on the front panel or remote controller cancels the

operation of the screen saver.

A button pressed in this case will not execute its original

function.

Initial settings (on the SET UP menu)

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2

Display VCD Settings Display AudioDVD

Guide Display ON1

OSD Language English2

Background Screen Picture 13

Screen Saver ON4

FL Dimmer Normal5

Display

ON1

OFF2

Settings Screen Saver

English

5 FL Dimmer

Select the brightness of the front panel display.

1 When the SET UP group “Display Settings” is

selected, press or to select “5 FL Dimmer”,

and then press SELECT.

2 Press or to select the preferred mode, and

then press SELECT.

1 Normal Normal brightness

2 Dim Dim

3 OFF No illumination while playing back a disc.

Dim when this unit is not playing back a

disc.

* The AUTO DISPLAY OFF indicator on

the front panel lights up.

Factory default setting: Normal

Initial settings (on the SET UP menu)

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2

AUTO

DISPLAY OFF

Display VCD Settings Display AudioDVD

Guide Display ON1

OSD Language English2

Background Screen Picture 13

Screen Saver ON4

FL Dimmer Normal5

Display

Normal1

Dim2

OFF3

Settings FL Dimmer

6 Signal System Conversion

[ and only]

(for China and General models only)

This unit is designed for use with the NTSC and PAL televison

formats. You have already selected the format your TV

monitor employs with the MODE SELECT (PAL/NTSC) switch

on the rear panel.

However, if you prefer, you can change the setting so that this

unit outputs video signals in the same format with the disc

being played back.

1 When the SET UP group “Display Settings” is

selected, press or to select “6 Signal System

Conversion”, and then press SELECT.

2 Press or to select the preferred format, and

then press SELECT.

1 Switch Generally select this.

Video signals are output from this unit in the

format selected with the MODE SELECT

(PAL/NTSC) switch on the rear of this unit.

(Refer to page 15.)

2 Disc Select this if your TV monitor employs both

PAL and NTSC formats.

* This unit outputs signals in the same

format with the disc currently played back.

Factory default setting: Switch

VCD

DVD

Initial settings (on the SET UP menu)

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2

Display VCD Settings Display AudioDVD

Guide Display ON1

OSD Language English2

Background Screen Picture 13

Screen Saver ON4

FL Dimmer Normal5

Signal System Conversion Switch6

Display

Switch1

Disc2

Settings Signal System Conversion

English

Audio Settings

The items in this group control audio signals output from the

AUDIO OUT terminals on the rear of this unit.

Note: The item No. 2 “Dynamic Range Control” and No. 3

“Speaker” are available for China and General models only.

1 Digital Output

On this item, you can select the format of digital signal to be

output from the OPTICAL and COAXIAL DIGITAL output

terminals of this unit for respective formats recorded on DVD

discs.

Depending on the format of digital signal, you can make this

unit convert the disc’s original format of digital signal into PCM

(48 kHz) format for outputting signals, or you can make this

unit output no signal from the OPTICAL and COAXIAL

DIGITAL output terminals of this unit.

1 When the SET UP group “Audio Settings” is

selected, press or to select “1 Digital Output”,

and then press SELECT.

2 Press or to select the format of digital signal

for which you will change the current setting, and

then press SELECT.

3 Press or to select the preferred mode, and

then press SELECT.

Note

The settings on this item are only applicable when playing

back a DVD.

Initial settings (on the SET UP menu)

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2, 3

Audio VCD Settings Display AudioDVD

Digital Output1

Audio Settings Digital Output

96kHz LPCM 48kHz PCM1

Dolby Digital Disc Original2

DTS Disc Original3

MPEG PCM4

Audio

48kHz PCM1

OFF2

Settings 96kHz LPCM

Initial settings (on the SET UP menu)

Format recorded on the disc

1 96kHz LPCM

[Linear PCM (96 kHz)]

2 Dolby Digital

3 DTS

4 MPEG (2 or 1)

Format of signals output from the OPTICAL and

COAXIAL DIGITAL terminals

PCM (2 ch) (48 kHz)

No output

Dolby Digital bitstream

(In this mode, the analog audio output terminals

output no signal.)

PCM (2 ch) (48 kHz/16 bit)

DTS bitstream

(In this mode, the analog audio output terminals

output no signal.)

No output

(In this mode, the analog audio output terminals

output no signal.)

MPEG (2 or 1) bitstream

(In this mode, the analog audio output terminals

output no signal.)

PCM (2 ch) (48 kHz/16 bit)

Selectable modes

1 48kHz PCM

2 OFF

1 Disc Original

2 PCM

1 Disc Original

2 OFF

1 Disc Original

2 PCM

Selectable modes for respective formats of digital signals recorded on DVDs

Factory default setting

1 96kHz LPCM: 48kHz PCM

2 Dolby Digital: Disc Original

3 DTS: Disc Original

4 MPEG: PCM

English

2 Dynamic Range Control

(for China and General models only)

If you prefer, you can reduce dynamic range of sound source

encoded with Dolby Digital. Dynamic range can be reduced in

two steps with this unit.

Notes

●

The settings on this item are only applicable when playing

back a DVD encoded with Dolby Digital.

●

The settings on this item are only effective when the “PCM”

mode is selected for “Dolby Digital” of the item “1 Digital

Output” on pages 59 and 60.

1 When the SET UP group “Audio Settings” is

selected, press or to select “2 Dynamic Range

Control”, and then press SELECT.

2 Press or to select the preferred mode, and

then press SELECT.

1 Maximum

A source is played back in the original sound

track’s wide dynamic range providing you with

powerful sounds like a movie theater.

Selecting this mode will be more ideal if you can

listen to a source in a high output level in a room

specially soundproofed for audio/video enjoyment.

2 Standard

A source is played back in the “compressed”

dynamic range of the source suitable for low level

listening.

3 Minimum

Dynamic range is more reduced than in the

“Standard” position. Selecting this mode will be

effective when you must listen to a source in an

extremely low level.

* In this mode, it may happen that sound is output

faintly or not output normally depending on a

source. In that case, select “Maximum” or

“Standard”.

Factory default setting: Maximum

Initial settings (on the SET UP menu)

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2

Audio VCD Settings Display AudioDVD

Digital Output1

Dynamic Range Control Maximum2

Speaker3

Audio

Maximum1

Standard2

Minimum3

Settings Dynamic Range Control

Dynamic range

“Dynamic range” is the difference between the maximum

level and the minimum level of sounds. Sounds on a movie

originally designed for movie theaters feature very wide

dynamic range.

Dolby Digital technology can bring the original sound track

into a home audio format with this wide dynamic range

unchanged.

Powerful sounds of extremely wide dynamic range are not

always suitable for home use. Depending upon the

condition of your listening environment, it may not be

possible to increase the sound output level as high as a

movie theater. However, in a level suitable for listening in

your room, the low level parts of source sound cannot be

heard well because they will be lost among noises in your

environment.

Dolby Digital technology also made it possible to reduce an

original sound track’s dynamic range for a home audio

format by “compressing” the data of sound.

3 Speaker [ only]

(for China and General models only)

Make this unit memorize what types of speakers are used in

your speaker system. In doing so, this unit automatically

decides the most efficient output mode of the 6CH DISCRETE

terminals to maximize the performance of your speaker

system.

1 When the SET UP group “Audio Settings” is

selected, press or to select “3 Speaker”, and

then press SELECT.

2 Press or to select the speaker(s) whose setting

you want to change, and then press SELECT.

1 Main Speaker

2 Center Speaker

3 Surround Speaker

4 Subwoofer

3 Press or to select the proper mode, and then

press SELECT.

(In case of “1 Main Speaker”)

1 Large

2 Small

* Refer to the table on the next page for details about the

selectable modes for respective speaker(s).

4 Press RETURN to return to the previous display

mode.

5 Repeat steps 2 to 4 to change the setting for other

speaker(s).

DVD

Initial settings (on the SET UP menu)

12345

+10

7890

FCANCEL

ANGLE

SELECT

TITLE AUDIO

SUBTITLE

SET UP

ON SCREEN

OFF

MULTI SPEED

RETURN

TITLE

INDEX

REPEAT

DISC SKIP

PROG

RANDOM

DISC MODE

TIME

OPEN

STOP

STILL

PAUSE

SKIP/SEARCH

PLAY

1, 2, 3

Audio VCD Settings Display AudioDVD

Digital Output1

Dynamic Range Control Maximum2

Speaker3

Audio

Main Speaker1

Center Speaker2

Surround Speaker3

Subwoofer

Large

Small

Yes4

Settings Speaker

Audio

Large1

Small2

Settings Main Speaker

English

Initial settings (on the SET UP menu)

Selectable modes for respective speakers

Speaker(s)

1 Main Speaker

2 Center Speaker

3 Surround Speaker

4 Subwoofer

Mode

1 Large

2 Small

1 Large

2 Small

3 None

1 Large

2 Small

3 None

1 Yes

2No

Description

Select this mode if your main speakers have a high ability for bass reproduction.

Select this mode if your main speakers do not have a high ability for bass

reproduction.

Select this mode if your center speaker has a high ability for bass reproduction.

Select this mode if you use a center speaker that is smaller than the main speakers.

Select this mode if you do not have a center speaker.

Select this mode if your surround speakers have a high ability for bass reproduction.

Select this mode if your surround speakers do not have a high ability for bass

reproduction.

Select this mode if you do not have surround speakers.

Select this mode if your system includes a subwoofer.

Select this mode if your system does not include a subwoofer.

Factory default setting

1 Main Speaker: Large

2 Center Speaker: Small

3 Surround Speaker: Small

4 Subwoofer: Yes

Notes

●

The settings on this item are only applicable when playing

back a DVD encoded with Dolby Digital.

●

The settings on this item are only effective when the “PCM”

mode is selected for “Dolby Digital” of the item “1 Digital

Output” on pages 59 and 60.

Appendix

Problem

This unit does not turn on when the

POWER switch is pressed.

This unit does not work normally.

The disc table does not close completely.

Play does not begin.

Play is delayed, or begins at the wrong

place.

No sound.

Sound “skips”.

Sound “hums”.

Noise from a nearby tuner.

Noise from inside of the disc table.

The remote controller does not work.

Cause

The power cord is not connected or not

completely connected.

There is an influence of strong external noise

(lightning, excessive static electricity, etc.) or

a misoperation on this unit while using this

unit.

A foreign object is obstructing the table.

The disc is damaged.

There is moisture on the laser pickup.

The disc has been loaded upside down.

The disc is dirty.

The disc may be scratched or damaged.

Improper output cable connections.

Improper amplifier operation.

This unit is being subjected to vibrations or

impacts.

The disc is dirty.

Improper cable connections.

The tuner is too close to this unit.

A warped disc may be loaded.

The batteries of this remote controller are too

weak.

Direct sunlight or lighting (of an inverter type

of fluorescent lamp etc.) is striking the remote

control sensor of the main unit.

What to Do

Securely connect the power cord.

Turn off this unit and disconnect the AC power

cord from the AC outlet. After about 30

seconds have passed, connect the power and

operate this unit again.

Carefully check the disc table and remove the

foreign object.

Check the disc carefully; replace it if

necessary.

Wait 20 to 30 minutes after switching the unit

ON before trying to play a disc.

Reload the disc with the label side up.

Clean the disc.

Check the disc carefully; replace it if

necessary.

Connect the cables properly. If the problem

persists, the cables may be defective.

Set the amplifier controls to the correct input

selection.

Relocate this unit.

Clean the disc.

Securely connect the audio cables. If the

problem persists, the cables may be

defective.

Move the tuner and this unit farther apart.

Replace the disc.

Replace the batteries with new ones.

Reposition the main unit.

Troubleshooting

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the

instruction below does not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center.

Common

English

Appendix

Problem

The screen type (4:3 or 16:9) does not

match your TV monitor.

Audio sound track and/or subtitle

language is not the one selected on the

SET UP menu.

No subtitles.

Angle cannot be changed.

Playback is not possible.

Picture is lightened and darkened

alternately.

No sound when digital signals from this

unit is selected as the input source on the

amplifier (or receiver).

A loud hissing noise is heard when playing

back a disc encoded with DTS.

A loud hissing noise is heard when playing

back a disc encoded with MPEG.

No sound when playing back a disc

encoded with DTS.

Cause

The setting of “TV Type” on the SET UP menu

is not proper.

If the audio sound track and/or subtitle

language you selected does not exist on the

disc, the priority language on the disc is used.

The disc does not have subtitles.

The display of subtitles is turned off.

The scene (or the entire disc) currently played

back has only one angle of view.

The rating level you set is lower than the level

of the disc.

A disc recoded with copyright protection is

played back when this unit is connected to the

TV by way of a video cassette recorder.

The setting of “Digital Output” on the SET UP

menu is not suitable for the digital terminal

connections between this unit and the

amplifier (or receiver).

This unit is not connected to a DTS decoder

or an amplifier (or receiver) equipped with a

DTS decoder.

This unit is not connected to a MPEG decoder

or an amplifier (or receiver) equipped with a

MPEG decoder.

Only analog terminal connections are made

between this unit and the amplifier (or

receiver).

What to Do

Make a proper setting on “TV Type”. (See

page 45.)

Press the SUBTITLE OFF/ON button to turn

on the display of subtitles.

Change the setting of “Rating Level” on the

SET UP menu to a higher level. (See pages

50 to 51.)

Connect this unit to the TV directly or by way

of an AV amplifier (or receiver).

Change the setting of “Digital Output” on the

SET UP menu to the suitable setting. (See

page 59.)

Use “Digital Output” on the SET UP menu to

select the “OFF” mode for “DTS”.

Use “Digital Output” on the SET UP menu to

select the “PCM” mode for “MPEG”.

No sound signals are output from the analog

audio signal output terminals of this unit when

playing back a disc encoded with DTS.

Problem

No menu appears.

Cause

The setting of “Playback Control” on the SET

UP menu is set to “OFF”.

The disc does not have a playback control

function.

What to Do

Change the setting of “Playback Control” on

the SET UP menu to “ON”. (See page 52.)

For DVDs only

For Video CDs only

Appendix

Title

“Title” is a unit to divide the contents on a DVD disc. Normally,

one title is assigned to one movie. When a disc has two or

more titles, they are numbered in sequence as title 1, title 2,

etc.

Chapter

A title on a DVD is subdivided into smaller divisions. They are

refered as “chapters” and numbered in sequence. They are

useful for quick location of the desired scene on a movie etc.

Track

Tunes (or pictures) recorded on a CD or Video CD are refered

as “tracks”. Tracks are numbered in sequence as track 1, track

2, etc. They are useful for quick search for the desired tune (or

picture).

Index

Some track on a Video CD or CD is subdivided into smaller

divisions (such as, for example, the movements within

classical symphonies) for easier location of those parts.

They are refered as “indexes” and numbered in sequence.

Dolby Digital

Dolby Digital is a digital audio format which mainly provides

high-quality multi-channel audio for sound tracks of movies. It

provides us up to independent 6 channels compatible with the

6 speaker configuration: Left main, right main, center, left

surround, right surround and subwoofer. It stores a large

volume of digital sound signals (as data) into a laserdisc, DVD,

etc. with a high level data-compression technology.

DTS

DTS (Digital Theater Systems) is also a multi-channel digital

audio format. It provides us up to 6 channels. DTS encodes

high-quality, 20-bit audio onto laserdiscs, compact discs and

DVDs with less data-compression.

Linear PCM

A basic digital audio format used in CDs. It is based on Pulse

Code Modulation (PCM), an analog-to-digital conversion

technology. No compression is applied to the data.

MPEG 1 audio

A digital audio format mainly used in Video CDs. It is based on

the MPEG (Moving Picture Expert Group) 1 format, a data

compression technology.

MPEG 2 audio

A digital audio format mainly used in Europe, Australia, etc. It

provides us high-quality multi-channel audio up to 8 channels

in the same way as Dolby Digital and DTS. It is based on the

MPEG 2 format, a data compression technology improved

more than MPEG 1.

Playback control

This function is recorded on a Video CD, version 2.0. Pictures,

music and information you want to play back can be selected

on a screen menu shown on the TV monitor.

Definition of terms

English

Appendix

Language code list

Enter the appropriate code number for “Menu Language”, “Subtitle Language” and/or “Audio Language” on the SET UP menu.

(See pages 47 to 49.)

Code

6565

6566

6570

6577

6582

6583

6589

6590

6665

6669

6671

6672

6673

6678

6679

6682

6765

6779

6783

6789

6865

6869

6890

6976

6978

6979

6983

6984

6985

7065

7073

7074

7079

7082

Code

7089

7165

7168

7176

7178

7185

7265

7273

7282

7285

7289

7365

7375

7378

7383

7384

7387

7465

7473

7487

7565

7575

7576

7577

7578

7579

7583

7585

7589

7665

7678

7679

7684

7686

Code

7771

7773

7775

7776

7778

7779

7782

7783

7784

7789

7865

7869

7876

7879

7967

7977

7982

8065

8076

8083

8084

8185

8277

8278

8279

8285

8287

8365

8368

8731

8372

8373

8375

8376

Code

8377

8378

8379

8381

8382

8383

8384

8385

8386

8387

8465

8469

8471

8472

8473

8475

8476

8478

8479

8482

8483

8484

8487

8575

8582

8590

8673

8679

8779

8872

8979

9072

9085

Language Name

Afar

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bislama

Bengali; Bangla

Tibetan

Breton

Catalan

Corsican

Czech

Welsh

Danish

German

Bhutani

Greek

English

Esperanto

Spanish

Estonian

Basque

Persian

Finnish

Fiji

Faeroese

French

Language Name

Frisian

Irish

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Hindi

Croatian

Hungarian

Armenian

Interlingua

Inupiaq

Indonesian

Icelandic

Italian

Hebrew

Japanese

Yiddish

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Korean

Kashmiri

Kurdish

Kirghiz

Latin

Lingala

Laotian

Lithuanian

Latvian, Lettish

Language Name

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

Maltese

Burmese

Nauru

Nepali

Dutch

Norwegian

Occitan

(Afan) Oromo

Oriya

Punjabi

Polish

Pashto, Pushto

Portuguese

Quechua

Rhaeto-Romance

Kirundi

Romanian

Russian

Kinyarwanda

Sanskrit

Sindhi

Sango

Serbo-Croatian

Singhalese

Slovak

Slovenian

Language Name

Samoan

Shona

Somali

Albanian

Serbian

Siswati

Sesotho

Sudanese

Swedish

Swahili

Tamil

Telugu

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Setswana

Tonga

Turkish

Tsonga

Tatar

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Wolof

Xhosa

Yoruba

Chinese

Zulu

Model

U.S.A. model

China model

General model

Region number of this

player

Region Management Information (for DVDs only)

This DVD/Video CD/CD combi-player is designed and manufactured to conform to the Region Management Information that is

recorded on a DVD disc. If the Region number of the DVD disc does not correspond to the Region number of this player, this player

cannot play back the disc.

ALL

Appendix

Region number or mark of discs which

this player can play back

•

To remove a disc from its storage case, open the case and

then press down at the center; with a finger through the

center hole and the outer edges held as shown in the

illustration, lift the disc out carefully.

•

Always handle the disc with care so that its surface is not

scratched.

•

Discs are not subjected to wear during play, but damage to

the disc surface when the disc is being handled can

adversely affect the disc’s play.

•

Discs are not affected by small particles of dust or

fingerprints on their playing surface, but even so they should

be kept clean. Wipe by using a clean, dry cloth. Do not wipe

with a circular motion; wipe straight outward from the center.

•

Do not try to clean the disc’s surface by using any type of

disc cleaner, record spray, anti-static spray or liquid, or any

other chemical-based liquid, because such substances might

irreparably damage the disc’s surface.

•

Do not expose discs to direct sunlight, high temperature or

high humidity for a long period of time, because these might

warp or otherwise damage the disc.

No!

Notes about handling discs

or a mark which includes

the region number

“1”.

ALL

or a mark which includes

the region number

“6”.

ALL

or a mark which includes

the region number

“3”.

English

Appendix

Specifications

AUDIO SECTION

Frequency response

DVD (48 kHz Sampling) ................................. 2 Hz to 22 kHz

DVD (96 kHz Sampling) ................................. 2 Hz to 44 kHz

CD, Video CD.................................................. 2 Hz to 20 kHz

Harmonic distortion + noise (1 kHz) .............. 0.002% or less

S/N ratio......................................... 115 dB or more (Weighted)

Dynamic range

DVD (48 kHz, 24 bit)...................................... 104 dB or more

CD, Video CD................................................. 100 dB or more

Output level (1 kHz, 0 dB) ......................................... 2 50.3V

VIDEO SECTION

VIDEO output ............................................... 1 Vp-p (75 ohms)

S VIDEO output

Y output ...................................................... 1 Vp-p (75 ohms)

C output

U.S.A. model ..................................... 0.286 Vp-p (75 ohms)

China and General models.................. 0.3 Vp-p (75 ohms)

COMPONENT VIDEO output

Y output ...................................................... 1 Vp-p (75 ohms)

Pb output

U.S.A. model ..................................... 0.648 Vp-p (75 ohms)

China and General models.................. 0.7 Vp-p (75 ohms)

Pr output

U.S.A. model ..................................... 0.648 Vp-p (75 ohms)

China and General models.................. 0.7 Vp-p (75 ohms)

GENERAL

Power requirements

U.S.A. model .................................................... 120V, 60 Hz

China model ......................................................220V, 50 Hz

General model .................................. 110 to 240V, 50/60 Hz

Power consumption ........................................................ 30W

Dimensions (W x H x D)

(Without side panels) ......................... 435 x 116 x 404 mm

(17-1/8” x 4-9/16” x 15-7/8”)

(With side panels) ............................... 473 x 116 x 404 mm

(18-5/8” x 4-9/16” x 15-7/8”)

Weight

(Without side panels) ....................... 6.2 kg (13 lbs. 10 oz.)

(With side panels) ............................. 7.2 kg (15 lbs. 13 oz.)

Accessories ................................ Audio/video connection cord

Remote controller

Batteries (size AA, R6, UM-3)

Please note that all specifications are subject to change

without notice.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other

intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection

technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in Japan

V267970-1

Yamaha DVDC900 Manual de usuario

Marca: Yamaha

Modelo: DVDC900

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Este manual también es adecuado para

DVD-C900

Descargar PDF

informe

En otros idiomas

français: Yamaha DVDC900 Manuel utilisateur
italiano: Yamaha DVDC900 Manuale utente
English: Yamaha DVDC900 User manual
Deutsch: Yamaha DVDC900 Benutzerhandbuch
русский: Yamaha DVDC900 Руководство пользователя
Nederlands: Yamaha DVDC900 Handleiding
português: Yamaha DVDC900 Manual do usuário
dansk: Yamaha DVDC900 Brugermanual
polski: Yamaha DVDC900 Instrukcja obsługi
čeština: Yamaha DVDC900 Uživatelský manuál
svenska: Yamaha DVDC900 Användarmanual
Türkçe: Yamaha DVDC900 Kullanım kılavuzu
suomi: Yamaha DVDC900 Ohjekirja
română: Yamaha DVDC900 Manual de utilizare

Yamaha DVDC900 Manual de usuario

Este manual también es adecuado para

Yamaha DVDC900 Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos