Gemini UZ-9128 H Manual de usuario

Marca: Gemini

Modelo: UZ-9128 H

Categoría: Micrófonos

Tipo: Manual de usuario

(1)(1)

(1)

MULTI LANGUAGE INSTRUCTIONS:

English...............................................................................................................Page 2

Deutsch.............................................................................................................Page 7

Español............................................................................................................Page 10

Francais..........................................................................................................Page 13

OPERATIONS MANUAL

BEDIENUNGSHANDBUCH

MANUAL DEL OPERADOR

MANUEL D’INSTRUCTIONS

UZ-II28 M, H & L

UZ-9I28 M, H & L

PROFESSIONAL DIVERSITY MICROPHONES

PROFESSIONELLE DIVERSITY-MIKROFONSYSTEME

MICRÓFONOS PROFESIONALES DE LA DIVERSIDAD

MICROPHONES PROFESSIONNELS DE DIVERSITÉ

(2)(2)

(2)

PLEASE READ BEFORE USING APPLIANCE,

IMPORTANT WARNING & SAFETY INSTRUCTIONS!

CAUTION

RISK OF ELECTRICAL SHOCK

DO NOT OPEN!

READ INSTRUCTIONS: All the safety and operating instructions should be read

before the product is operated.

RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for

future reference.

HEED WARNINGS: All warnings on the product and in the operating instructions

should be adhered to.

FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.

CLEANING: The product should be cleaned only with a polishing cloth or a soft dry

cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids

since they may corrode the cabinet.

ATTACHMENTS: Do not use attachments not recommended by the product

manufacturer as they may cause hazards.

WATER AND MOISTURE: Do not use this product near water, for example, near a

bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a

swimming pool; and the like.

ACCESSORIES: Do not place this product on an unstable cart, stand, tripod, bracket,

or table. The product may fall, causing serious injury to a child or adult, and serious

damage to the product. Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the product. Any mounting of the

product should follow the manufacturer’s instructions, and should use a mounting

accessory recommended by the manufacturer.

CART: A product and cart combination should be moved with care. Quick stops, excessive

force, and uneven surfaces may cause the product and cart combination to overturn.

See Figure A.

VENTILATION: Slots and openings in the cabinet are provided for ventilation and to

ensure reliable operation of the product and to protect it from overheating, and

these openings must not be blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug, or other similar surface. This product

should not be placed in a built-in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s instructions have been adhered to.

POWER SOURCES: This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the type of power

supply to your home, consult your product dealer or local power company.

LOCATION: The appliance should be installed in a stable location.

NON-USE PERIODS: The power cord of the appliance should be unplugged from the

outlet when left unused for a long period of time.

GROUNDING OR POLARIZATION:

• If this product is equipped with a polarized alternating current line plug (a plug

having one blade wider than the other), it will fit into the outlet only one way. This is

a safety feature. If you are unable to insert the plug fully into the outlet, try reversing

the plug. If the plug should still fail to fit, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of the polarized plug.

• If this product is equipped with a three-wire grounding type plug, a plug having a

third (grounding) pin, it will only fit into a grounding type power outlet. This is a

safety feature. If you are unable to insert the plug into the outlet, contact your

electrician to replace your obsolete outlet. Do not defeat the safety purpose of the

grounding type plug.

POWER-CORD PROTECTION: Power-supply cords should be routed so that they are

not likely to be walked on or pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience receptacles, and the point where

they exit from the product.

OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is

connected to the product, be sure the antenna or cable system is grounded so as

to provide some protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information

with regard to proper grounding of the mast and supporting structure, grounding of

the lead-in wire to an antenna discharge unit, size of grounding conductors, location

of antenna-discharge unit, connection to grounding electrodes, and requirements for

the grounding electrode. See Figure B.

LIGHTNING: For added protection for this product during a lightning storm, or when it

is left unattended and unused for long periods of time, unplug it from the wall outlet

and disconnect the antenna or cable system. This will prevent damage to the

product due to lightning and power-line surges.

POWER LINES: An outside antenna system should not be located in the vicinity of

overhead power lines or other electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside antenna system, extreme

care should be taken to keep from touching such power lines or circuits as contact

with them might be fatal.

OVERLOADING: Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of fire or electric shock.

OBJECT AND LIQUID ENTRY: Never push objects of any kind into this product

through openings as they may touch dangerous voltage points or short-out parts

that could result in a fire or electric shock. Never spill liquid of any kind on the product.

SERVICING: Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all servicing

to qualified service personnel.

DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the following conditions:

• When the power-supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the product.

• If the product has been exposed to rain or water.

• If the product does not operate normally by following the operating instructions. Adjust only

those controls that are covered by the operating instructions as an improper adjustment of

other controls may result in damage and will often require extensive work by a qualified

technician to restore the product to its normal operation.

• If the product has been dropped or damaged in any way.

• When the product exhibits a distinct change in performance, this indicates a need for service.

REPLACEMENT PARTS: When replacement parts are required, be sure the service

technician has used replacement parts specified by the manufacturer or have the

same characteristics as the original part. Unauthorized substitutions may result in

fire, electric shock, or other hazards.

SAFETY CHECK: Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks to determine that the product is in

proper operating condition.

WALL OR CEILING MOUNTING: The product should not be mounted to a wall or ceiling.

HEAT: The product should be situated away from heat sources such as radiators,

heat registers, stoves, or other products (including amplifiers) that produce heat.

CAUTION: THIS PRODUCT SATISFIES FCC REGULATIONS WHEN SHIELDED CABLES AND

CONNECTORS ARE USED TO CONNECT THE UNIT TO OTHER EQUIPMENT. TO PREVENT

ELECTROMAGNETIC INTERFERENCE WITH ELECTRIC APPLIANCES SUCH AS RADIOS AND

TELEVISIONS, USE SHIELDED CABLES AND CONNECTORS FOR CONNECTIONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT

THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE

(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL

TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED

“DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF

SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

(3)(3)

(3)

UZ-ii28/UZ-9128UZ-ii28/UZ-9128

UZ-ii28/UZ-9128

ZM-128 HANDHELD MICROPHONE ZB-128 BODYPACK

UZ-1128 RECEIVER UZ-9128 RECEIVER

(4)(4)

(4)

• Before setting up, make sure that the transmitter and receiver are tuned

to the same frequency.

• Do not use two transmitters in the same frequency. Use good quality

batteries to avoid the damage resulting from a defective leaking battery.

• Turn the volume control on the receiver to adjust receiver output level to

match input level requirements of an audio mixer or amplifier.

• While checking sound, move the transmitter around the area where you

use the system to look for dead spots. If you find any dead spot, change

the receiver position. If it does not work, avoid such places.

• To avoid interference, do not put the receiver too near metal object and

avoid obstructions between transmitter and receiver.

• Avoid the interference from TV, radio, other wireless appliances and etc.

FUNCTION DESCRIPTIONS:

UZ-1128 & UZ-9128 RECEIVERS:

(1) HEADPHONE MONITOR VOLUME CONTROL: Rotate this knob to

control headphone volume level.

(2)HEADPHONE INPUT CONNECTOR: Plug headphone into this 1/4” jack

connector to monitor receiver audio.

NOTE: NUMBERS (3)-(11) APPLY TO BOTH UZ-1128 & UZ-9128 RECIEVERS.

(3)POWER: Pushes the receiver on and off.

(4)CHANNEL + BUTTON: Press this button to change channel forward.

(5)CHANNEL - BUTTON: Press this button to change channel backward.

(6)PROGRAMMABLE DISPLAY: Displays channel number, frequency and

volume level.

(7)RF LEVEL INDICATORS: Five LEDs per RF antenna channel glow to

indicate RF signal strength. The more LEDs that glow, the stronger the

received signal. If none of these LEDs glow, no signal is being received.

(8) AF LEVEL INDICATORS: Five LEDs glow to indicate audio signal

strength. Green indicates normal operation. RED indicates approaching

overload condition.

(9)VOLUME + BUTTON: Press this button to increase the receiver output

level to match the input sensitivity of an audio mixer or an amplifier.

(10) VOLUME - BUTTON: Press this button to decrease the receiver output

level to match the input sensitivity of an audio mixer or an amplifier.

(11) DC OUT: Connect the supplied cable to the receiver and the microphone,

and it takes around 10 hours to charge.

(12) ANTENNA INPUT CONNECTOR: TNC-type connectors provide

connection to the supplied antennas or to coaxial cable used with an

antenna divider, antenna boosters or remote antennas.

(13) ANTENNA: Fixed-length UHF antenna permanently mounted on rear panel.

NOTE: NUMBERS (14)-(17) APPLY TO BOTH UZ-1128 & UZ-9128 RECIEVERS.

(14) BALANCED OUTPUT: 3-pin XLR connector provides balanced low-

impedance output

(15) UNBALANCED OUTPUT: 1/4” phone jack provides unbalanced low-

impedance output

(16) SQUELCH: The squelch adjusts the output level to suppress the noise.

The higher squelch control, the lower the sensitivity of the receiver and

decrease the service area of the system. Set the squelch to minimum

before turning the receiver on.

(17) DC IN: Input connector for the supplied AC adapter.

To combine two receivers in a 19" standard rack by using 2 short L type plastic

racks (L2) and 2 metal connecting plates (C1).

INTRODUCTION:

Congratulations on your purchase of a GEMINI wireless system. This

state of the art unit includes all the latest features backed by a three

year limited warranty. Prior to use, we suggest that you carefully read

the instructions.

SYSTEM FEATURES:

• UZ-1128 M includes UZ-1128 diversity receiver & ZM-128 handheld microphone

• UZ-1128 H includes UZ-1128 diversity receiver, HSM-X4 headset mic with mini XLR

& ZB-128 belt pack transmitter with mic/line switch

• UZ-1128 L includes UZ-1128 diversity receiver, LAV-X4 lavalier mic with mini XLR

& ZB-128 belt pack transmitter with mic/line switch

• UZ-9128 M includes UZ-9128 true diversity receiver & ZM-128 handheld microphone

• UZ-9128 H includes UZ-9128 true diversity receiver, HSM-X4 headset mic with mini XLR

& ZB-128 belt pack transmitter with mic/line switch

• UZ-9128 L includes UZ-9128 true diversity receiver, LAV-X4 lavalier mic with mini XLR

& ZB-128 belt pack transmitter with mic/line switch

• Balanced & unbalanced outputs

• 128 band UHF synthesizer controlled frequencies

• Phase locked loop (PLL) circuitry

• Super high sensitivity with extremely low noise transmission & reception

• Stable & quality SMT assembled PCB module

• LCD display screen

• RF & AF LED meters

• Squelch control

• ¼” earphone output for UZ-1128

• ZM-128 has a uni-directional condenser unit microphone

• HSM-X4 has an electret condenser unit microphone

• LAV-X4 has an electret condenser unit microphone

• ZM-128 has a rechargeable input for battery recharging

CAUTIONS:

1. In the UK Some wireless microphone systems require a license. This

depends on the frequency of the system and the country in which it is

to be used. It is the responsibility of the user to establish if a license is

required. As a guide, for the UK and Europe, VHF radio microphones

between 173.800 and 175.000 MHz, or UHF microphones between 863

MHz and 865 MHz do not need a license. This is for microphones work

ing at normal power (10mW ERP hand-held or 50mW ERP if body

worn). All other use on alternative frequencies needs a license. More

information on this can be found at :www.jfmg.co.uk/jfmgecom/

default.aspx If in any doubt, users are advised to investigate the

licensing requirements for their region.

2. All operating instructions should be read before using this equipment.

3. To reduce the risk of electrical shock, do not open the unit. THERE ARE

NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a

qualified service technician.

4. Do not expose this unit to direct sunlight or to a heat source such as a

radiator or stove.

5. Dust, dirt and debris can interfere with the performance of this unit. Make

an effort to keep the unit away from dusty, dirty environments, and cover

the unit when it is not in use. Dust it regularly with a soft, clean brush.

6. When moving this equipment, it should be placed in its original carton

and packaging. This will reduce the risk of damage during transit.

7. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

8. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY

CONTROLS OR SWITCHES.

9. REMEMBER, ANY CHANGES MADE TO THE UNIT WITHOUT

AUTHORIZATION FROM GEMINI WILL VOID YOUR WARRANTY.

FCC RULES AND REGULATIONS:

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions: (1)This device may not cause harmful

interference and (2) This device must accept any interference received,

including interference that may cause undesired operation

NOTICE: THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY

RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE

THE EQUIPMENT.

IMPORTANT NOTE, TO COMPLY WITH THE FCC RF EXPOSURE COMPLIANCE REQUIREMENTS, NO

CHANGE TO THE ANTENNA OR THE DEVICE IS PERMITTED. ANY CHANGE TO THE ANTENNA

OR THE DEVICE COULD RESULT IN THE DEVICE EXCEEDING THE RF EXPOSURE

REQUIREMENTS AND VOID USER’S AUTHORITY TO OPERATE THE DEVICE.

UZ-1128 WIRELESS SYSTEM:

The UZ-1128 & UZ-9128 wireless systems are high quality audio products

that provide excellent performance under most operating conditions. The

receivers are used with our 700 selectable channels transmitters. The

receiver operates in UHF band frequency with PLL synthesized control.

controlled. The wireless microphone system with 700 selectable

frequencies via Phase Locked Loop (PLL) circuitry makes it easy to choose

non-interfered channels. Super high sensitivity, extremely low noise

transmission and reception. Diversity technology ensures the reception

quality.

WIRELESS NOTES:

(5)(5)

(5)

To mount a receiver in a 19" standard rack by using 2 long L type metal

racks (L1).

CHARGING CONNECTING DIAGRAM:

Connect the supplied DC cable to the receiver and the microphone, and it takes

around 10 hours to charge and the LED of transmitter is flashing all the time.

ZM-128 HANDHELD MICROPHONE:

The handheld microphone operates in UHF band frequency with PLL

synthesized control. UHF 700 preprogrammed selectable frequencies to

avoid interference. Uni-directional dynamic or uni-directional electret

condenser cartridges feature different characters for various choices. Use

1.5V x 2 AA size dry or rechargeable batteries for cost saving and

environmental protection.

(1)GRILLE: Protects the microphone capsule and helps reduce breath

sounds and wind noise.

(2) PROGRAMMABLE DISPLAY: Displays channel number and battery power level

(3) ON/OFF SWITCH: Turns transmitter power on and off.

(4) BATTERY COMPARTMENT: Insert 2 x1.5V AA dry or rechargeable batteries

into the compartment and make sure that the polarity of batteries is correct.

(5) CHANNEL + BUTTON: Press this button to change channel forward.

(6) CHANNEL BUTTON: Press this button to change channel backward.

(7) BATTERY COVER: Unscrew to expose battery compartment and

channel buttons.

(8) COLOR CLIP: This color clip helps to identify the frequency for multi-

channel operation.

(9) CHARGING INPUT: The inserted rechargeable batteries are charged by

using the supplied DC-plug cable connection to DC Out on the receiver.

It takes up to 10 hours for charging.

ZB-128 BODYPACK TRANSMITTER:

The bodypack transmitter operates in UHF band frequency with PLL

synthesized control. UHF 700 preprogrammed selectable frequencies to

avoid interference. Various uni-directional electret condenser cartridge

options. Use 1.5V x 2 AA size dry or rechargeable batteries for low

operating cost.

(1)ON/OFF SWITCH: Turns transmitter power on and off.

(2)3-PIN MINI XLR CONNECTOR: The included electret lapel microphone

is inserted into the connector on transmitter.

(3)PROGRAMMABLE DISPLAY: Displays channel number and battery power level

(4)CHANNEL + BUTTON: Press this button to change channel forward.

(5)CHANNEL BUTTON: Press this button to change channel backward.

(6)MIC/LINE SELECTOR: The switch sets the audio input either to

microphone level or line level.

(7)GAIN: The rotary control adjusts the sensitivity of the transmitter’s audio

to the level of the connected lapel microphone or instrument.

(8)BATTERY COMPARTMENT: Insert 2 X 1.5V AA dry or rechargeable batteries

into the compartment and make sure that the polarity of batteries is correct.

(9)MIC UNIT: The uni-directional electret condenser unit features the wide

frequency response for warm, rich bass and clear sound.

(10) TIE CLIP: To clip on the tie or lapel for free-movement.

(11) CABLE: With 3-pin mini XLR connector cable to connect the transmitter.

(12) ANTENNA: Permanently connected, helical antenna.

(13) CHARGING INPUT: The inserted rechargeable batteries are charged by

using the supplied DC-plug cable connection to DC Out on the receiver.

It takes up to 10 hours for charging.

SETTING UP:

Prior to setting up, check that the transmitter and receiver are tuned to

the same frequency. Two or above transmitters operating in the same

frequency can not be used at the same time and area, so please select

the different frequencies which can be used simultaneously at local area.

BASIC CONNECTIONS:

Connect the receiver output to the audio mixer or amplifier input, using a

standard audio cable with 3-pin XLR connectors or 1/4” phone plugs.

Never use the balanced and unbalanced audio outputs at the same time!

This may cause signal loss or increased noise.

AB-8A, the antenna booster is highly recommended for long-distance

purpose, such as in stadium or in auditorium. By means of antenna

holder, the antenna and booster can put wherever you want. It is an ideal

design for multi-channel application. Antenna boosters are applied to the

receivers, which have detachable antennas.

AH-1 Antenna holder makes it easy to fix wherever for connection antenna and

booster. AH-1 can be assembled on the mic stand or on the wall.

(6)(6)

(6)

CONNECTING THE RECEIVER TO POWER:

Plug the antennas into the TNC socket on the receiver, if the antennas

are detachable. Point the antennas upward. Check that the voltage of

the supplied AC adapter conforms to the voltage available (AC110 or

AC220) in local area. Using the wrong AC adapter may cause irreparable

damage to the unit. Plug the feeder cable of the supplied AC adapter

into DC IN socket on the receiver. Then plug the AC adapter into a

power outlet.

TO A RECEIVER TO AN AUDIO MIXER OR

AN AMPLIFIER:

When using a standard audio cable with 3-pin XLR connectors or 1/8th”

phone plugs to plug into the MIC IN on the audio mixer or on the

amplifier, please push the Volume Button on the receiver to 20 (approx.) ,

the output level for balanced and unbalanced output is around at 77mV.

When using a standard audio cable with 3-pin XLR connectors or 1/8th”

phone plugs to plug into the LINE IN on the audio mixer or on the

amplifier, please push the Volume Button on the receiver to 32, the

output level for unbalanced and balanced output is about at 770mV.

Never use the balanced and unbalanced audio outputs at the same time!

This may cause signal loss or increased noise.

INSERTING BATTERIES INTO THE HANDHELD /

BODYPACK TRANSMITTER:

Open the battery cover and insert batteries into the battery compartment

conforming to the polarity (+)(-) marks. The transmitter can not work with

incorrectly inserted batteries. When push the ON/OFF switch to “ON” to

switch the power on, LCD shows battery power level. If it displays

insufficient power, the inserted rechargeable batteries can be charged

by using the supplied DC 1.5 plug cable directly connection to DC Out

on the receiver and charging input on the transmitter. It should take up to

10 hours for charging. Close the battery cover.

SETTING UP THE HANDHELD MICROPHONE TRANSMITTER:

Switch the receiver power on and check the frequency and volume level.

Switch the transmitter and hi-fi appliance (amplifier, tape deck etc.) power on.

Test the microphone and adjust the levels on your audio mixer or amplifier.

SETTING UP THE BODYPACK TRANSMITTER

A. CONNECTING A MICROPHONE:

Open the battery cover. Push the MIC/LINE switch to “MIC” and use the

supplied screwdriver to adjust the GAIN at appropriate position.

Plug the 3-pin mini XLR connector end of the microphone cable into the

audio input connector on the bodypack transmitter. Switch the transmitter

and hi-fi appliance (amplifier, tape deck etc.) power on. Test the

microphone and adjust the levels on your audio mixer or amplifier.

B. CONNECTING AN INSTRUMENT:

Open the battery cover. Push the MIC/LINE switch to “LINE” and use the

supplied screwdriver to adjust the GAIN at appropriate position.

Plug the 1/4th” phone plug of the optional guitar cable to the output jack

on the instrument and the 3-pin mini XLR into audio input connector on

the bodypack transmitter. Switch the transmitter and hi-fi appliance (amplifier,

tape deck etc.) power on. Play the instrument for testing and adjust

the levels on your audio mixer or amplifier.

TROUBLE-SHOOTING:

NO SOUND:

Check the power supply of the microphone and receiver.

Check that the transmitter and receiver are tuned to the same frequency.

Check whether the hi-fi appliance is switched on and the receiver output

is connected to mixer or amplifier input.

Check whether transmitter is too far away from receiver or SQUELCH

control set too high.

Check whether receiver is located too near metal object or there are

obstructions between transmitter and receiver.

SOUND INTERFERENCE:

Check the antenna location.

When using 2 or above microphone sets simultaneously, make sure

that the chosen frequencies are not interfered.

Check whether the interference comes from other wireless microphones,

TV, radio and etc.

DISTORTION:

Check the volume level of the receiver is set too high or too low.

Check whether the interference comes from other wireless microphones,

TV, radio and etc.

SPECIFICASPECIFICA

SPECIFICA

TIONS:TIONS:

TIONS:

RECEIVERS:RECEIVERS:

RECEIVERS:

UZ-1128:UZ-1128:

UZ-1128:

Frequency range....................................................................................USA-740-770MHz = 700CH

.........................Europe A-France/Spain: 740-770MHz = 700CH B-UK/Germany: 840 - 870MHz = 700CH

Case.....................................................................................................................Half 19" EIA Case

Receiving System...................................................................................................PLL synthesized

Receiving Mode.........................................................................Single Channel, Switching diversity

Frequency Stability............................................................................................................+/- 0.05%

Receiving Sensitivity..........................................................................At 8 dBuV over 80dB S/N ratio

Image & Spurious Rej...............................................................................................80 dB minimum

Selectivity..............................................................................................................................> 50dB

Modulation Mode.........................................................................................................................FM

IF Frequency............................................................................................1st: 56MHz 2nd: 10.7MHz

Dynamic Range......................................................................................................................>96dB

Tone Signal.....................................................................................................................32.768KHz

S/N Response........................................Over 94dB, at 48KHz deviation and 60dBuV antenna input

AF Response................................................................................................50Hz to 15KHz(+/-3dB)

T.H.D. ........................................................................................................................<1%(at 1KHz)

Power Supply................................................................................................................DC 12 ~ 18V

Audio Output.....................................................................................Balanced & unbalanced output

Current Consumption..............................................................................................260mA +/- 10mA

Dimension(mm)WxHxD..............................................................................................210 x 44 x 165

UZ-9128:UZ-9128:

UZ-9128:

Frequency range.................................................................................USA: 740 - 770MHz = 700CH

......................Europe A-France/Spain: 740 - 770MHz = 700CH B-UK/Germany: 840 - 870MHz = 700CH

Case...................................................................................................................19" EIA Metal Case

Receiving System...................................................................................................PLL synthesized

Receiving Mode.................................................................................Single Channel, True-diversity