Sylvania LC420SS8 El manual del propietario

Marca: Sylvania

Modelo: LC420SS8

Categoría: Equipo de música suplementario

Tipo: El manual del propietario

42"Digital LCD

NEED HELP?

PLEASE CALL TOLL FREE[

1-800-968-3429

OR VISIT OUR WEB SITE AT

www.SylvaniaConsumerElectronics.com

Owner's Manu

....LC420SS

•YlY_

The model and serial numbers of this unit may be found on the cabinet.

You should record and retain those numbers for future reference.

Model No.:

Serial No.:

[] Precautions

WARNING: TO REDUCETHE RISKOF FIREOR ELECTRICSHOCK, DO NOT EXPOSETHIS APPARATUS

TO RAIN ORMOISTURE.

APPARATUS SHALL NOT BEEXPOSEDTO DRIPPINGOR SPLASHING AND NO OBJECTS

FILLED WITH LIQUIDS, SUCH AS VASES,SHALL BEPLACED ON THE APPARATUS.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFERSERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage"within the

apparatus's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the apparatus.

The caution marking is located on the rear or bottom of the cabinet.

Important Safety Instructions

1. Read these instructions. 10. Protect the power cord from being walked on or

2. Keep these instructions.

3. Heed all warnings.

4, Followall instructions.

5. Do not use this apparatus near water.

6, Clean onlywith drycloth.

7, Do not block any ventilation openings. Install in

accordance with the manufacture's instructions.

8, Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9, Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12, Useonly with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or _'_

sold with the apparatus. When a cart is used, _ _ m

use caution when moving the cart/apparatus _ _

combination to avoid injury from tip-over.

1:3. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

FCC WARNING

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause

harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to

operate this apparatus if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This apparatus has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful interference to

radio or television reception, which can be determined by turning the apparatus off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the apparatus and receiver.

3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-O03.

Cet appareil num_rique de la classe B est conforme _ la norme NMB-O03 du Canada.

Thisapparatusshouldnotbeplacedinabuilt-ininstallationsuchasabookcaseorrack unless proper ventilation is provided.

Make sure to eave a space of 3.2 inches (8cm) or more around this apparatus.

Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 1

WARN NG: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

(_) LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW.

WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the instructions. ]

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

• Do not handle the power cord with wet hands.

• Do not remove this unit cabinet. Touching parts inside the cabinet could result in electric shock and/or damage to this

unit. For service and adjustment inside the cabinet, call a qualified dealer or an authorized service center.

• Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.

• Do not put your fingers or objects into the unit.

LOCATION AND HANDLING

• The openings should not be blocked by placing the unit on a bed, sofa, carpet, rug, or other similar surface.

• Do not install the unit near or over a radiator or heat register.

• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.

• Avoid a place with drastic temperature changes.

• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.

Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is

placed too close to them. In this case, please ensure enough space between the external devices and the unit.

• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

NOTE ABOUT RECYCLING

• This unit's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance

with your local recycling regulations.

• Batteries should never be thrown away or incinerated but disposed of in accordance with your local

regulations concerning chemical wastes.

WHEN CARRYING THIS UNIT

• At least two people are required when carrying this unit.

• Make sure to hold the upper and bottom frames of the unit firmly as illustrated.

ii!ii_!!_

iiiii:_il

ii !!ii_iii

i i ¸

iiiii!i_

iTJ

ii:!!ili

[] Supplied Accessories

owner's manual quick start guide

(1EMN22312) (1EMN22313)

remote control batteries

(NFO2OUD) (AA x 2)

Phillips pan screw for

attaching the stand x 4

(FPH34100)

• If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free

customer support line found on the cover of this manual,

• Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters),

Contact your local electronics store for these items.

[]Attaching the Stand

You must attach the stand to the unit to display upright. Be sure the front and rear of the stand match the proper direction,

Spread a thick and soft cloth over

a table,

Place the main unit face down

onto it,

Make sure not to damage the

screen, At least two people are

required at this step.

2 Insert the stand all the way to the 3

main unit slowly,

Make sure not to put the AC cord

between the stand and the unit.

Drive Phillips pan screws in the

4 threaded holes at the bottom

of the stand with a screwdriver

tightly,

No re:

• When attaching the stand, ensure that oil screwsare tightly fastened. If the stand isnot properly attached, it could causethe unit to fall,

resulting in injuries as well as damage to theunit.

•Make sure to usea table which can support the weight of this unit and is larger than this unit.

•Make sure the table is in astable location.

•Ifyou removed thestand shafts from this unit for wall mounting, make surethatyou attach them before attaching thestand.

[] Symbols Used in this Manual

The following is the description for the symbols used in this manual,

Description refers to:

: Digital TV operation : Analog TV operation

• If neither symbol appears under the function heading, operation is applicable to both,

[] Trademark Information

• HDMI, the HDMI logo and High-Definition Muhimedia interface are trademarks or registered trademarks of HDMI

Licensing LLC,

• Manufactured under license from Dolby Laboratories/'Dolby"and the double-D symbol are trademarks of Dolby

Laboratories.

• Product that have earned ENERGY STAR®are designed to protect the environment through superior energy efficiency.

_Features [] Contents

• DTV/TV/CATV

- You can use your remote control to select

channels which are broadcast in digital format and

conventional analog format. Also, cable subscribers

can access their cable TV channels.

• Information Display (DTV only)

- You can display the title, contents and other

information of the current DTV program on the TV

screen.

• Auto Channel Scan

- This unit automatically scans and memorizes

channels available in your area, eliminating difficult

setup procedures.

• V-chip

- This feature allows you to block children's access to

inappropriate programs.

• Closed Caption Decoder

- Built-in closed caption decoder displays text for

closed caption supported programming.

• MTS/SAP Tuner

- Audio can be selected from the remote control.

• Auto Shut Off Function

- If there is no signal input from the antenna terminal

and no operation for 15 minutes, the unit will turn

off automatically.

• Sleep Timer

- This feature will automatically turned off the power

of the unit at a specific time.

• Choices for On-screen Language

- Select your on-screen language:

English, Spanish or French.

• Stereo Sound Function

• PLL Frequency Synthesized Tuning

- Provides free and easy channel selection and lets

you tune directly to any channel using the channel

number buttons on the remote control.

• Resume

- This unit automatically rnemorizes settings ifa

power failure occurs.

HDMI Input

PC Input

Component Video Input

S-video Input

AV Input

Digital Audio Coaxial Output

/N FRODUC FON

Precautions...................................................... 2

SuppliedAccessories.............................................. 4

AttachingtheStand............................................... 4

SymbolsUsedinthisManual....................................... 4

TrademarkInformation........................................... 4

Features......................................................... 5

Buttonsonthe RemoteControl..................................... 6

Installingthe Batteries............................................ 6

ControlPanel..................................................... 7

RearPanel....................................................... 7

_iiii_!ill

iill!ill

PREPARAT ON

BasicConnection.................................................. 8

ExternalDeviceConnection........................................ 9

AttachingaWallMount Bracket(s01dseparately)................... 12

/NTAL SETTING

Initial Setup..................................................... 13

MainMenu...................................................... 14

AutoChannelScan............................................... 14

LanguageSelection.............................................. 15

WATCH NG TV

ChannelSelection................................................ 16

VolumeAdjustment.............................................. 16

SleepTimer..................................................... 16

StillMode....................................................... 17

SwitchingEachMode............................................. 17

SwitchingAudioMode ........................................... 17

ScreenInformation.............................................. 18

1]/ScreenDisplayMode........................................... 19

OPTIONAL SETT NG

ChannelList..................................................... 20

ManualRegister................................................. 20

AntennaConfirmation............................................ 21

PictureAdjustment.............................................. 22

SoundAdjustment............................................... 23

ClosedCaption................................................... 24

DTVClosedCaption............................................... 25

CCStyle......................................................... 26

V-chip.......................................................... 28

PCSettings...................................................... 31

HDMIAudio..................................................... 32

TROUBLESHOOT NG

TroubleshootingGuide........................................... 33

/NFORMAT ON

Glossary........................................................ 35

Maintenance.................................................... 35

CableChannelDesignations....................................... 36

GeneralSpecifications............................................ 36

ElectricalSpecifkation............................................ 36

OtherSpecifications......................................... 36

ii iiii:il

_ii'iii!ii

ilili!i;

iiii_i:i

Limited Warranty ..................................... Backcover

any storage medium, in any form or for any purpose without the express prior written consent of Funai.

Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves tile right to change tile content herein without the

obligation to notify any person or organization of such changes.

I_UNAI with the _'_ design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written

consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this

manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein.

Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property

rights to tile fullest extent of the law.

[] Buttons on the Remote Control

7--

1. POWER (p13)

Press to turn the unit on and off

2. Number buttons (p16)

• Press to select channels.

-- (hyphen)

• Press to shift the minor channel

from the major channel.

3. SETUP (p14)

Press to display the main menu.

4. <II_IAIV(p13)

Press to move left/right/up/

down through the items.

5. ENTER (p13)

Press to decide the command of

setting when the main menu is

displayed.

6. BACK (p18)

Press to return to previous menu

operation.

7. CN. RECALL (p16)

Press to return to previous

channel.

8. VOk. /_(p16)

Press to adjust the volume.

9. MUTE D_:(p16)

Press to turn the sound on and off.

10, INPUT SELECT (pl 7)

Press to access connected

external devices like a DVD player

orVCR.

11. SLEEP (p16)

Press to activate the sleep timer.

12. AUDIO (p17)

Digital Mode (DTV)

• Press to select the audio

language.

Analog Mode (TV)

• Press to select the audio mode.

13. STILL (p17)

Press to pause screen image.

14. SCREEN MODE _ (pl 9)

Press to select aspect ratio

available for the TV screen.

15. INFO (p18)

Digital Mode (DTV)

• Press to display the channel

information, signal type and TV

setting.

Analog Mode (TV)

• Press to display the channel

number, signal type and TV

setting,

External Input Mode

• Press to display the external

input modes, signal type and TV

setting.

16. CN A/V (p16)

Press to select channels and the

external input modes.

[] Installing the Batteries

Install the batteries (AA x 2) matching tile polarity indicated inside battery compartment of the remote control,

Battery Precautions:

• Be sure to follow the correct polarity as indicated in the battery coropartment. Reversed batteries may cause damage to tbe device.

• Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries; they can overheat and rupture.

[] Control Panel

[] Rear Panel

rear of this unit

side of this unit

rear of this unit

1. POWER (p13)

Press to turn the unit on and off.

2. INPUT SELECT (p17)

• Press to access connected external devices like a

1 DVD player or VCR.

• Press to decide the command of setting when the

'2 menu is displayed.

3. CHANNELA/V (p16)

'3 Press to select channels or move up/down through the

main menu items.

•4 4, VOLUME /_(p16)

Press to adjust the volume or move right (_)/left (_)

5 through the main menu items.

5. SETUP (p14)

6 Press to display the main menu,

6. infrared sensor window

•_7 Receives infrared rays transmitted from the remote

control.

7. standby indicator

Lights up in standby mode.

side of this unit

ii!ii_!!_

ii:i:il

1. PCinputjack(p12)

VGA cable connection for PC,

2. audio input jack for PC connection (pl 2)

Mini-plug audio cable connection for PC.

3. antenna input jack (p8)

RF coaxial cable connection for your antenna or

cable/satellite box.

4. HDMlinputjack (p9)

HDMI connection for HDMI devices.

5. audio inputjack(p9)

RCA audio connection for DVI devices.

(For HDMI1 input jack only)

6. AC power cord

Connect to a standard AC outlet to supply power to

this unit.

1. coaxial digital audio output jack (pl 1)

Coa× ald g talaod oconnectionforddecoderoran

audio receiver.

8. audio input jack (plO)

RCA audio connection for external devices,

9. video input jack (pl 1)

RCA video connection for external devices,

10. S-video input jack (p 1O)

S-video connection for external devices.

11. audio output jack (pl 1)

RCA audio connection for external devices.

12. component video and audio input jack (plO)

Component video and RCA audio connection for

external devices.

[] Basic Connection

Thissectiondescribeshowto connectthe unittoanantenna,cable/satellitebox,etc.

I Note:

• Besurey_urantenr_a_r_therdeviceisc_nr_ectedpr_per_ybef_rep_ugging_nthep_werc_rd.

[Antenna Connection]

Connect the RFcoaxial cable on your home outlet to the antenna input jack of this unit.

e.g.)

antenna _

rear of this unit

RFcoaxial cable

cableTV

company

Once connections are completed, turn on the unit and begin initial setup.

Channel scanning is necessary for the unit to memorize all available channels in your area.

(Refer to "Initial Setup" on page 13.)

Note:

• Foryour safety and to avoid damage to this unit, pleaseunplug the RFcoaxial cable from the antenna input jack before moving the

unit.

• Ifyou usean antenna to receiveanalog TV,it should also work for DTVreception. Outdoor or attic antennas will be more effective than

settop versions.

• Toeasilyswitch your reception source between antenna and cable,instafl an antenne selector.

• Ifyou connect to thecable system directly, contact the CATVinstaller.

[Connection to Cable Box or Satellite Box]

Use an RF coaxial cable to connect the antenna input jack of the unit to the antenna output jack of the cable/satellite box.

e.g.)

satellite dish

rear of this unit

ANTIN ANTOUT RF coaxial cable

cableTV

company

cable/satellite box

* Required cables and connecting methods differ depending on the cable/satellite box.

For more information, please contact your cable/satellite provider.

[] External Device Connection

[HDMI Connection]

HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio through

a single cable. It ensures that the content sent from the source to the unit is of the highest possible resolution.

e.g.) rear of this unit

HDMI cable

DVD player with the HDMI output jack

Note:

• This unit accepts 480i/480p/720p/1080i/1080p video signals, end 32kHz/44. lkHz/48kHz audio signals.

• This unit accepts only 2 channel audio signal (LPCM).

• You need to select "PCM" for the digital audio output of the device connected or the HDMI audio setting.

There may be no audio output ifyou select "Bitstream', etc.

• This unit only accepts signals compliant with EIA861.

[HDMI-DVI Connection]

If your video device has a DVI output jack, use an HDMI-DVI conversion cable for this connection,

e.g.)

HDMI-DVI To HDMI1 input jack only

conversion cable

rear of this unit

cable box or satellite box

with the DVl output jack

i ill!ill

ii!ii_!,!_

}i!iiiiii

iTJ

ii:_!!ili

Note:

• This unitoccepts 480i/480p/720p/I080i/1080p video signals.

• HDMI-DVI connection requires separate RCA audio connection as well.

• Audio signals ore converted from digital to analog for this connection.

• DVI does not display 480i image that is not compliant with EIA/CEA-861/861B.

iiiziii:ii

[Component Video Connection]

Component video connection offers better picture quality for video devices connected to the unit.

Use a component video cable to connect the unit to external video devices equipped with component video output

jacks.

If you connect to the unit's COMPONENTI or COMPONENT2 video input jacks, connect an RCA audio cable to the audio

L/R jacks of COMPONENTI or COMPONENT2 accordingly.

e.g.)

DVD player with _

the component video output jacks _:_,

F AUDIO OUTq

_ L R

RCA audio cable

rear of this unit

Note:

• Thisunit accepts 480i/480p/720p/1080i/1080p video signals.

• When the noiseappears on the TVscreen, disconnecting the VGAcablemay reduce it.

[S-video Connection]

S-video connection offers good picture quality for video devices connected to the unit.

Use an S-video cable to connect the unit to external video devices equipped with S-video output jack.

If you connect to the unit's VIDEOI S-video or VIDEO2 S-video input jack, connect an RCA audio cable to the audio L/R

jacks ofVIDEOI orVIDEO2 accordingly.

e.g.)

DVD player with

the S-video output jack

AUDIO OUT S-VIDEO

L R _ OUT rear of this unit

Note:• Ifyou connect to the S-videoinput jack and the video inputjack at thesame time, the S-videoconnection will have priority. ]

[Video Connection]

RCA video connection offers standard picture quality for video devices connected to the unit.

If you connect to the unit's VIDEO1 or VIDEO2 video input jack, connect an RCA audio cable to the audio L/R jacks of

VIDEO 1 orVlDEO 2 accordingly.

When the audio jack of the video device is monaural, connect an RCA audio cable to the audio L input jack.

e.g.) rear of this unit

camcorder video c

VCR

AUDIO OUT VIDEO

/ L R OUT

Note:

• Ifyou connect to the S-videoinput jack and the video input jack at thesame time, the S-video connection will have priority.

[Audio Output Connection]

Digital (for digital broadcasting only)

If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital

broadcasting sound.

Analog

Ifyou connect this unit to an external analog audio device, you can enjoy stereo (2channel) audio.

e.g.)

Dolby Digital

decoder

stereo system

DIGITAL AUDIO

COAXIAL IN

digital audio coaxial cable

rear of this unit

RCA audio cable

_iiii!i!_i

i¸i¸i¸¸¸11

ii!ii_!.!_

!;b

ii iiii:i

ii !!ii_ill

i i ¸

iiiii!i_

ii:_!!ii_i

[PCConnection]

This unit is equipped with a PCinput jack, If you connect this unit to your PC,you can use this unit as a computer

monitor.

e.g.) VGA cable should be rear of this unit

with ferrite core.

VGA cable

mini-plug audio cable

personal computer

Note:

• Pleasepurchase the VGAcable that has aferrite core.

[]Attaching a Wall Mount Bracket (sold separately)

Thefollowingisadescriptionofthemethodforattachingawallmountto thisunit,

Whenperformingthisoperation,refertothe instructionmanualincludedwith thewall mountkit.

You need the following wall mount kit for this unit

Flat panel TV wall mount

Modelnumber:VMPL

For more information,

please visit SANUSSYSTEMSwebsite at www.sanUSoCOm

* ,_l_,and,(2_indicate the position of the screw holes on this unit.

rear of this unit

-'_ stand shafts

1 Spread a thick and soft cloth over a table. Place the

main unit face clown onto it. Make sure not to damage

the screen. At least two people are required at this step.

Note:

• Make sure to usea table which can support the weight of

this unit and islarger than this unit.

• Make sure thetable is in a stable location.

2 Remove the stand shafts from this

unit.

Unscrew the M5 screws indicated by 0_and remove the

stand shafts. Please be careful with the unit after you

remove the stand shafts.

Note:

• TheM5screws and stand shafts you have removed are

necessaryfor reattachment at a later date. Make sure to

keep them in asafe place.

Attach the monitor brackets to this unit using the

M6 screws included with the wall mount kit.

Note:

• Only use the screwholes indicated by _ for mounting this

unit.

• For instructions on how toattach the monitor plate, refer

to the instruction manual included with the wall mount kit.

Attach this unit to the wall. At least two people are

required at this step.

Note:

• Referto the instruction manual included with the wall

mount kit when securing this unit to the wall.

[] Initial Setup

Thissectionwill guideyouthroughtheunit'sinitialsettingwhichincludes

selectingalanguageforyouron-screenmenuandautochannelscan,

whichautomaticallyscansandmemorizesviewablechannels,

Before you begin:

Makesureifthe unitisconnectedto antenna orcable.

After making all the necessary connections, press

[POWER] to turn on the unit.

_'OWER

• This operation maytake a few moments.

2 Use [Cursor l/Y] to select the on-screen language

from the choices on the right side of the TV screen.

(English / Espa_ol / Fran_ais)

V ¸

• "Initial Setup" menu on step 3 will be displayed in the

selected language after you press [ENTER].

3 Use [Cursor l/V] to select "Air" for TV channels or

"Cable" for CATV channels, then press [ENTER].

• Scanning and memorizing of channels start

automatically.

Note:

• Ifyou connect the cablesystem directly, contact the CATV

installer.

• Ifyou press[POWER] or [SETUP]during auto channel

scan,this setting will be canceled.

• Theinitial auto channel scanfunction can be executed

for either "Air"or "Cable"only once. Whenyou change the

connection (Air/Cable), set auto channel scan again. (Refer

to page 14.)

• Youcan cancelor exit the initial auto channel scanmenu

bypressing [SETUP].

• If thereis no signal input from theantenna terminal and

no operation for severalsecondsafter you turn on the unit,

"Helpful Hints" appears. Follow the instructions listed on

the TVscreen.

!,,7_

ii !!i,i_]i

i 7 ¸

ii111!7

! i71::

ii:_!!ii_i

• When the scanning and memorizing are completed,

the lowest memorized channel in the broadcasting

will be displayed.

iiTiii:ii

[] Main Menu

Thissectiondescribestheoverviewofthe mainmenudisplayedwhenyou

press[SETUP].Formoredetails,seethereferencepageforeachitem.

Themainmenuconsistsofthe functionsetting itemsbelow.

Press [SETUP].

• EXIT

To exit settings.

• PICTURE

You can adjust the picture quality.

(Refer to "Picture Adjustment" on page 22.)

• SOUND

You can adjust the sound quality.

(Refer to "Sound Adjustment" on page 23.)

• CHANNEL

You can automatically scan the viewable channels

and remove those that are undesired.

(Refer to "Auto Channel Scan" on page 14.)

• DETAIL

You can change the display format for closed

caption, which displays the dialogue ofa TV program

or other information across the TV screen.

(Refer to "Closed Caption" on page 24.)

Set the viewing limitations.

(Refer to "V-chip" on page 28.)

Adjust the position, stability and clarity of the PC

screen.

(Refer to "PC Settings" on page 31.)

And select the sound input for the HDMI1 input jack

if your unit is connected to an HDMI device.

(Refer to "HDMI Audio" on page 32.)

• LANGUAGE

You can change the language (English, Spanish,

French) displayed on the main menu.

(Refer to "Language Selection" on page 15.)

[]Auto Channel Scan

If youswitchwires(e.g.,betweenantennaandCATV)or ifyou movethe

unit to adifferent areaafter the initial setting, or if you restorethe DTV

channelyoudeleted,youwill needto performauto channelscan.

Beforeyou begin:

Makesureifthe unitisconnectedto antennaorcable.

Press [SETUP] to display the main menu.

2 Use [Cursor AIr] to select "CHANNEL", then press

[ENTER].

3 Use [Cursor A/r] to select "Autoscan", then press

[ENTER].

Use [Cursor A/r] to select an appropriate option, then

press [ENTER].

• When aerial antenna is connected, select "Air".

• When connected to CATV, select "Cable".

• Scanning and memorizing of channels start

automatically.

• When the scanning and memorizing are completed,

the lowest memorized channel will be displayed.

Note:

• lfyou connect the cable system directly, contact the CATV

installer.

• Ifyou press [POWER] or [SETUP] during auto channel

scan, the setting will be canceled.

• Channel settings will be saved even if the power fails.

• Ifyou need the English menus instead of the Spanish or

French men us you are having, press [SETUP]. Use

[Cursor A/V] to select "IDIOMA" or "LANGUE" then press

[ENTER]. Use [Cursor A/V] to select "English", then press

[ENTER]. Press [SETUP] to exit the main menu.

• With regard only to the digital channel, even after the

scanning is complete if you unplug the AC power cord

before turning off the unit by pressing [POWER], the

channel setting may be lost.

[] Language Selection

Youcan choose English, Spanish, or French as your on-screen language.

Press [SETUP] to display the main menu.

2 Use [Cursor A/V] to select "LANGUAGE", then press

[ENTER].

3 Use [Cursor A/V] to select "English", "Espa_ol" or

"Fran_ais", then press [ENTER].

i,?i_

ii!ii_!.!_

iiiii:_il

Press [SETUP] to exit.

i i ¸

iiiii!i_

jC ¸

iTJ

ii:_!!ii_i

[] Channel Selection

Selectchannelsbypressing[CH•/V] or[theNumberbuttons].

[] Volume Adjustment

Thissectiondescribeshowto adjustthevolume.Themutefunction,which

turnsthesoundoffandon,isalsodescribed.

• To select the memorized channels, use [CH •Iv] or

[the Number buttons].

• To select the non-memorized channels, use

[the Number buttons].

To Use [the Number buttons]

When selecting analog channel 12

- When selecting digital channel 12-1

Be sure to press [-] before entering the minor

channel number.

• Press [CH. RECALL] to return to the previously

viewed channel.

About digital TV broadcasting:

With its high definition broadcast, digital broadcasting

far surpasses analog broadcasting in both its picture

and sound quality.

What is the minor channel?

By using high compression technology, digital

broadcasting offers a service that enables multiple

signals to send simultaneously,

Therefore, you can select more than one program per

major channel since digital broadcasting technology

distinguishes between multiple channels broadcast by

a single network,

NTSC(analog mode) [Air Time] ATSC(digital mode)

18:00

18:30

19:00

19:30

20:00

20:30

major cha_nel

,,_ :change automatically

_:> :change manually by using [CH •Iv]

• I

minor channel

Note:

• "No Signal" will appear on the TVscreenafter the minor

channel broadcast is over.

Use [VOL. I ] to adjust the audio volume,

• The volume bar will be displayed at the bottom of

the TV screen when adjusting the volume,

• The volume bar display will automatically disappear

in a few seconds,

Press [MUTE D_] to turn off and on the sound,

MU;_

• "Mute" is displayed on the TV screen for a few

seconds,

Press [MUTE D_:]again or [VOL. _I ] to recover the

original volume,

[] Sleep Timer

Thesleeptimer canbeset toautomatically turn offthe unit after an

incrementalperiodoftime.

1 Press [SLEEP] to set the sleep timer.

• Sleep timer display appears on the %/screen,

2 Press [SLEEP] repeatedly to change the amount of time

until shut off,

i,i :

• You can set your unit to turn off after a set period of

time (from 30 to 120 minutes),

• Each press of [SLEEP] will increase the time by 30

minutes.

• After set up, the sleep timer display can be called up

for checking by pressing [SLEEP],

To Cancel the Sleep Timer

Press [SLEEP] repeatedly until "Sleep Off" is displayed

on the TV screen,

Note:

• Thesleeptimer setting display will automatically

disappear in a few seconds.

• Whenyou disconnect the unit from theACoutlet or when

apower failure occurs,the sleeptimer setting will be

canceled.

[] Still Mode

Youcanfreezethe imageshownontheTVscreen,

Press [STILL] to pause the image shown on the screen.

S_iLi

• The sound output will not be paused.

• If no signal isdetected or protected signal is received

during still mode, the image remains paused and the

sound output will be muted.

• The still function will be released after 5 minutes.

To cancel still mode, press any button except [POWER].

[] Switching Each Mode

Youcaneasilyswitchwiththe remotecontrolto the DTV(ATSC)andTV

(NTSC)ortoaccessexternaldeviceswhentheyareconnectedto theunit,

Press [INPUT SELECT] or [CH A] repeatedly to cycle

through the input modes.

',:U

TV/DTVchannel

• Pressing [CH Y] reverses the direction of the mode.

To use the video or S-video input jack of VIDEO1 on

the unit, select "Video1 ".

To use the video or S-video input jack of VIDEO2 on

the unit, select "Video2".

To use the component video input jacks of

COMPONENT1 on the unit, select "Component1".

To use the component video input jacks of

COMPONENT2 on the unit, select "Component2".

To use the HDMI1 input jack on the unit, select

"HDMI1 ".

To use the HDMI2 input jack on the unit, select

"HDMI2".

To use the PC input jack on the unit, select "PC".

[] Switching Audio Mode

Thissectiondescribeshowto switchthe audiolanguage,

i,71_

Press [AUDIO] to display the currently selected

audio mode. While receiving an MTS broadcast,

press repeatedly to cycle through the available audio

channel.

AUBiO

When all audio are available

When stereo and monaural audio are available

When SAP and monaural audio are available

When only monaural audio is available

STEREO

SAP

MONO

(Cannot be switched)

: Outputs stereo-audio

: Outputs second audio program

: Outputs mono-audio

• The information display will automatically disappear

in a few seconds.

Press [AUDIO] to display the currently selected

language and the number of available languages.

2 Press [AUDIO] repeatedly to cycle through the

available audio languages.

Ai Z_iiO

ii:iii!

i i ¸

iiiii!i_

iTJ

ii:!!ii_i

• Available languages differ depending on the

broadcast. "Other" is displayed when the audio

language cannot be acquired, or the acquired

languages are other than English, Spanish or French.

• The information display will automatically disappear

in a few seconds.

Note:

• Pressing[AUDIO] does not control external audio devices.

[] Screen Information

Youcandisplaythecurrentlyselectedchannelorotherinformationsuchas

the audiomodeonthe TVscreen.

Intheanalogmode,the currentchannelnumberandtheaudiomodeare

displayed.

Inthe digital mode,thedetailedbroadcastinginformation for the current

channelsuchas programtitle, programguidesare displayed.

Press [INFO].

Press [INFO] to display the details of the currently

selected program.

• The current channel number, audio mode, type of

resolutions for video signal, TV aspect ratio, CC and

TV rating are displayed at the top-right corner of the

TV screen.

To clear the display, press [INFO] again.

You can also press [BACK].

[Broadcasting Information]

• The following information is displayed.

1 program title

2 broadcast station

3 program guide

(The program guide added to broadcasting

information is displayed. Maximum display of 4

lines.)

4 channel number

5 audio language

(Refer to"Switching Audio Mode" on page 17.)

6 effective scanning lines and scan mode

7 program format

8 program aspect ratio

9 program rating

10 CC (not available if CC is set to "Off")

9 lO

Note:

• When the program guide consists of more than 4 lines, use

[CursorA/V] to scroll

• "No description provided" isdisplayed when the program

guide is not provided.

• While theprogram guide isdisplayed, the dosed caption

function isinterrupted.

• Inexternalinput mode, thefollowing screenis displayed;

e.g.)When an external device isconnected to VIDEO1input

jack.

• Theinformation display will automatically disappear in

1minute.

[]TV Screen Display Mode

4typesofdisplaymodescanbeselectedwhen the broadcastingstation

issending4:3or16:9videosignal.And3typesofdisplaymodescanbe

selectedfor PCinputsignal.

Press [SCREEN MODE _] repeatedly to switch the TV

aspect ratio.

For 4:3 video signal

Sidebar

(normal)

Wide

Full

Cinema

[Sidebar]

Display a 4:3 picture at its original size. Sidebars appear

on both edges of the screen.

[Full]

Display a 4:3 picture at a 16:9 size; the picture is

stretched horizontally to fill the screen.

[Cinema]

Display a 4:3 picture at a 16:9 size; the picture is

stretched horizontally and vertically to fill the screen,

This crops out the top and bottom of the picture.

[Wide]

Display the picture with its center at the original size

and the edges stretched horizontally.

For 16:9 video signal

Full Zoom

(normal)

Expand Cinema

[Full]

Display a 16:9 picture at its original size,

[Zoom]

Display a 16:9 picture at its maximum size without

changing its horizontal and vertical ratio.

[Cinema]

Display a vertically stretched picture.

[Expand]

Display a horizontally stretched picture.

For PC input signal

Sidebar Full

Dot By Dot

(normal)

[Sidebar]

Display a proportionately stretched picture. Sidebars

appear on both edges of the screen,

[Full]

Display a picture that isstretched out of proportion to

fill the screen.

[Dot By Dot]

Display a picture in its original size,

Note:

• Youmay not switch the display mode depending on the

program.

• For PCinput signal "Sidebor" may not be setectable

depending on the aspectratio of the input signal.

i,i'i_

i111;

ii:iii!

i 'ii'i'

iiiii!}_

iTJ

ii:_!!ii_i

[] Channel List

Thechannellistfunctionletsyouremoveundesiredchannelsfromthe

channelregistrationlist,

Press [SETUP] to display the main menu.

[] Manual Register

Themanualregisterfunctionletsyouaddthechannelsthatwerenotadded

bytheautochannelscanduetothereceptionconditionatthe initialsetting,

Press [SETUP] to display the main menu.

2 Use [Cursor A/Y] to select "CHANNEL", then press

[ENTER].

Use [Cursor A/V] to select "CHANNEL", then press

[ENTER].

3 Use [CursorA/V] to select "Channel List", then press

[ENTER].

Use [Cursor A/V] to select "Manual Register", then

press [ENTER].

Use [Cursor A/V] to select the channel you want to

remove, then press [ENTER].

Use [the Number buttons] to enter the number of the

channel you want to add, then press [ENTER].

@@@

• The channel display for the removed channel

darkens. You will not be able to select the channel

again using [CH A/V].

• To reactivate a removed channel, highlight it using

[Cursor A/V] and press [ENTER]. The channel

display lightens.

• When you remove a major channel, its minor

channels are removed as well.

Note:

• Thechannel with the "DTV"indicated on the display is

ATSC.Otherwise the channel isNTSC.

Press [SETUP] to exit.

!!;i! i iii _

Note:

• Ifset up completes successfully,

"Registered to the Channel List" is displayed.

• Ifexternalinputis used,itis notpossible to register the

channel and "Unavailable" will be displayed on theTV

screen.

[] Antenna Confirmation

Thisfunctionletsyoucheckthe signalstrengthofeachchannel,

Press [SETUP] to display the main menu.

2 Use [Cursor A/V] to select "CHANNEL", then press

[ENTER].

3 Use [Cursor A/Y] to select "Antenna", then press

[ENTER].

i,?i_

ii!ii_!,!_

ii:i:_il

Use [the Number buttons] or [CH A/V] to select the

channel for which you want to check the signal strength.

0@@

@00

ii !!i,i_iii

i i ¸

iiiii!i_

ii:_!!ii_i

• If the channel is set to external input, you cannot

confirm the antenna condition.

Press [SETUP] to exit,

[] Picture Adjustment

Youcanadjust brightness,contrast,color,tint andsharpness.

1 Press [SETUP] to display the main menu.

2 Use [Cursor A/V] to select "PICTURE", then press

[ENTER].

Brightness

Contrast

Color

Tint

Cursor_

to decrease

brightness

to decrease

contrast

to decrease

color

Cursorl_

to increase

brightness

to increase

contrast

to brighten

color

to add red to add green

Sharpness

to make soft to make clear

Use [Cursor A/Y] to select the item you want to adjust,

then press [ENTER].

Reset Settings

Use [Cursor A/V] to select "Reset", then press [ENTER]

to restore the "Picture Mode" setting to default.

Adjust the picture quality.

Picture Mode

Use [Cursor A/V] to select the desired setting, then

press [ENTER]. (Standard, Dynamic, Movie and News)

Brightness, Contrast, Color, Tint, Sharpness

Use [Cursor _/1_] to adjust.

41o

Color Temp•

Use [Cursor A/V] to select the desired setting, then

press [ENTER]. (Cool, Neutral and Warm)

Energy Saving

Use [Cursor _/1_] to adjust the brightness of the backlight.

:To brighten

:To darken

Note:

• Tocancel picture adjustment, press[SETUP].

Press [SETUP] to exit.

[] Sound Adjustment

Youcanadjusttreble,bassandsurround,

1 Press [SETUP] to display the main menu.

2 Use [Cursor A/r] to select "SOUND", then press

[ENTER].

3 Use [Cursor A/r] to select the sound type you want to

adjust, then press [ENTER].

Surround

Use [Cursor A/r] to turn on or off the surround

function, then press [ENTER].

Reset Settings Z

Use [Cursor A/r] to select "Reset", then press [ENTER]

to restore the sound settings to default.

Note:

• Tocancel sound adjustment, press[SETUP].

Press [SETUP] to exit.

!;b

Adjust the sound setting.

Treble, Bass

Use [Cursor </1!_] to adjust.

Cursor< Cursorl_

Treble to decrease to increase

_ higher-pitched higher-pitched

, sounds sounds

Bass to decrease to increase

lower=pitched lower=pitched

sounds sounds

ii !!i,i_iii

i i ¸

iiiii!i_

iTJ

ii:_!!ii_i

.........

[] Closed Caption

Youcanviewclosedcaptioning(co)forTVprograms,moviesandnews.

Closedcaptionreferto text ofdialogueordescriptionsdisplayedon-screen

f0rthe hearingimpaired.

1 Press [SETUP] to display the main menu.

2 Use (Cursor A/V] to select "DETAIL", then press

[ENTER].

3 Use (Cursor A/V] to select "Closed Caption", then

press [ENTER].

Use (Cursor A/Y] to select "Conventional CC", then

press [ENTER].

Use [Cursor A/V] to select the desired closed caption,

then press [ENTER].

[Caption Mode]

CC1 and Text1;

are the primary caption and text services.

The captioning or text is displayed in the same

language as the program's dialogue

(up to 4 lines of script on the TV screen, where it

does not obstruct relevant parts of the picture).

CC3 and Text3;

serve as the preferred data channels.

The captioning or text is often a secondary language.

CC2, CC4, Text2 and Text4;

are rarely available and broadcasters use them only

in special conditions, such as when "CC1" and "CC3"

or "Text1" and "Text3" are not available.

• There are 3 display modes according to programs:

Paint-on mode:

Displays input characters on the TV screen

immediately.

Pop-on mode:

Once characters are stored in memory, they are

displayed all at once.

Roll-up mode:

Displays the characters continuously by scrolling

(max. 4 lines).

Press [SETUP] to exit.

Note:

• Toshow theclosed caption on your TVscreen,broadcast

signal must contain the dosed caption data.

• Not all TVprograms and commercials have the closed

caption or all typesof the dosed caption.

• Captions and texts may not match the TVvoice exactly.

• Changing channels may delay the dosed caption for afew

seconds.

• Adjusting or muting the volume may delay thedosed

caption for a few seconds.

• Abbreviations, symbols and other grammatical shortcuts

may be usedin order to keeppace with theon-screen

action. Thisisnot aproblem with the unit.

• Thecaption or text characters will not bedisplayed while

the main menu or functions display is shown.

• Ifa black boxappears on the TVscreen, this means that

the closed caption is set to the text mode. Todear the box,

select "CC1'_"CC2""CC3","CC4"or ,,Off,,.

• If the unit receivespoor quality television signals, the

captions may contain errors,or theremight be no captions

at alL Somepossible causesof poor quality signals are:

- Automobile ignition noise

- Electricmotor noise

- Weaksignal reception

- Multiplex signal reception (ghosts or screenflutter)

• Theunitretains thedosedcaptionsettingifthepower

fails.

• Closedcaption will not bedisplayed whenyou are using

an HDMI connection.

• When the unit receivesa special effects playback signal

(i.e.,Search,Slow and Still) from a VCR'svideo output

channel (CH3or CH4),the unit may not display the correct

caption or text.

[] DTV Closed Caption

Inaddition tothe basicclosedcaptiondescribedonpage24,DTVhasits

own closedcaptioncalledDW CCUsethis menuto changethesettings for

DTVCC.

Press [SETUP] to display the main menu.

Sii iiii_

2 Use [Cursor A/V] to select "DETAIL", then press

[ENTER].

3 Use [Cursor A/V] to select "Closed Caption", then

press [ENTER].

i,?i_

Use [Cursor A/r] to select the desired DTV closed

caption, then press [ENTER].

DTV CC

off

ServicelN6

Select if you do not want

DTV CC.This is the default.

Select one of these before

changing any other item

in "Closed Caption" menu.

Choose"Service1" under

normal circumstances.

Press [SETUP] to exit.

Note:

• "DTVCC" thatyou con switch differs depending on the

broadcast description.

ii!iiii!i

Use [CursorA/V] to select "DTV CC", then press

[ENTER].

[] CC Style

Youcanchangethe style ofCCsuchasfont,colororsize,etc.

Press [SETUP] to display the main menu.

2 Use [Cursor A/V] to select "DETAIL", then press

[ENTER].

Use [Cursor A/Y] to select "On", then press [ENTER].

7 Use [Cursor A/V] to select an item, then press

[ENTER]. Then use [Cursor A/V] to select the desired

setting and press [ENTER].

Picture display

Use [Cursor A/V] to select "Closed Caption", then

press [ENTER].

Use [Cursor A/V] to select "CC Style", then press

[ENTER].

Use [Cursor A/V] to select "User Setting", then press

[ENTER].

Edge

(Edge Color and EdgeType)

Font

(Font Style, Font Size, Font Color and Font Opacity)

Back

(Back Color and Back Opacity)

• The setting description for each item is shown below.

[Font Style]

Closed Captioning font style can be changed as below.

[Font Size]

Font size of the displayed caption can be switched as

below.

[Font Color]

Font color of the displayed caption can be switched as

below.

[Edge Type]

Edge type of the displayed caption can be switched as

below.

[Font Opacity]

Font opacity of the displayed caption can be switched

as below.

[Back Color]

Background color of the displayed caption can be

switched as below.

8 Press [SETUP] to exit.

ii ,,

i iiiiiill

ii!;i_!,!_

iiiii:_il

[Back Opacity]

Background opacity of the displayed caption can be

switched as below.

[Edge Color]

Edge color of the displayed caption can be switched as

below.

ii !!i{ii

i i ¸

iiiii!i_

ii:_!!ii_i

[] V-chij

V-chip reads the ratings for programs, then denies accessto the programs

which exceed the rating level you set. With this function, you can block

certain programming inappropriate for children.

1 Press [SETUP] to display the main menu.

2 Use [Cursor A/Y] to select "DETAIL", then press

[ENTER].

3 Use [Cursor A/V] to select "V-chip", then press

[ENTER].

Use [the Number buttons] to enter the 4-digit

numbers for your password.

@@@

See the following description for setting each item.

A-."A. MPAA Rating" _ page 29

B-."B. TV Rating" _ page 29

C-."C. New Password" =I>page 30

Note:

• When you select a rating and set it to "Block", the higher

ratings will be blocked autornatically. The lower ratings

will be available for viewing.

• When you set the highest rating to "View", all ratings turn

to "View" automatically.

• To block any inappropriate programming, setyour limits in

"MPAA Rating", "TV Rating" and "Downloodable Rating"

• The V-chip setting will be retained after a power failure

(except the access code reverts to 0000).

• If the rating is blocked, will appear.

• "Downloadable Rating" will be available when the unit

receives a digital broadcast using the new rating system.

• If the broadcasting signal does not have the downloadable

rating information, "Downloadable Rating is currently not

available." will appear.

This message will also appear when you try to access

"Downloadable Rating" after you have cleared the

downloadable rating information, and the new

information has not been downloaded since.

• To clear the downloadable rating information andits

setting, select "Clear Downloadable Rating"

• When you have not set up your password, enter

0000.

• When the password is correct, the "V-chip" menu is

displayed.

MPAARatingistheratingsystemcreatedbyMPAA(Motion Picture

AssociationofAmerica).

Use [Cursor AIr] to select "MPAA Rating", then press

[ENTER].

Use [Cursor A/r] to select the desired rating, then

press [ENTER] repeatedly to switch between "View"

and "Block".

'_ _ _j_._,_ ...................

Use [Cursor AIr] to select "TV Rating", then press

[ENTER].

,,<_y

Use [Cursor A/V/</I_] to select the desired rating,

then press [ENTER] repeatedly to switch between

"View" and "Block".

i,?i_

Rating Category

X Mature audience only

NC-17 No one under 17 admitted

R Restricted; under 17requires accompanying

parent or adult guardian

PG-13 Unsuitable for children under 13

PG Parental guidance suggested

G General audience

NR No rating

7 Press [SETUP] to exit.

Note:

• Changing the category to "Block" or "View" automatically

changes all itssub ratings to the same ("Block" or "View").

Press [SETUP] to exit.

[To Set the Sub Ratings]

As for TV-MA, TV-14, TV-PG, or TV-Y7, you can further

set the sub ratings to block specific elements of

i i!i

programming. To set the sub ratings, follow the step

below.

Use [Cursor A/V/'</I_] to select the desired rating,

then press [ENTER] repeatedly to switch between

"View" and "Block".

ii !!i,i_iii

iTJ

Rating Category

TV-MA Mature audience only higher

TV-14 Unsuitable for children under 14 _

TV-PG Parental guidance suggested

TV-G General audience

TV-Y7 Appropriate for all children 7 and I

older _

TV-Y Appropriate for all children lower

Sub Rating

Category

FantasyViolence

Violence

Sexual Situation

Coarse Language

Suggestive Dialogue

Rating

TV-Y7

TV-PG

TV-14

TV-MA

TV-PG,TV-14

Note:

• Blockedsub rating will appear beside the main rating

category in "TVRating" menu.

• You cannot block asub radng (D,L,Sor V)if the main

rating isset to ,View,

• Changing the category to "Block" or "View" automatically

changes all itssub ratings to the same ("Block" or "View").

Althoughthe default code"0000"issuppliedwith the unit,youcanset

yourownpassword.

Use [Cursor A/V] to select "New Password", then press

[ENTER].

Press [the Number buttons] to enter the new 4-digit

password.

• Enter password again in "Confirm password." entry

field.

@@@

0OO

@@@

7 Press [SETUP] to exit.

Note:

• Make sure newpassword and confirm password must be

exactly the same. If tbey are different, the space is cleared

for reentering.

• Yourpasswordwillbeerasedandreturn to thedefault

(0000) when apower failure occurs.Ifyou forget the

password, unplug the power cord for 10seconds to restore

the password to 0000.

[] PC Settings

Thisfunctionletsyouadjustthe PCscreenposition,clockand phaseduring

PCinput,

Press [SETUP] to display the main menu.

2 Use [Cursor A/V] to select "DETAIL", then press

[ENTER].

3 Use [Cursor A/r] to select "PC settings", then press

[ENTER].

Use [Cursor A/r] to select the setting you want to

adjust, then press [ENTER].

Adjust the setting.

Auto Adjustment

Use [Cursor A/r] to select "Adjust", then press

[ENTER].

• The Horizontal/Vertical position, clock and phase of

the PC screen are automatically adjusted.

Horizontal Position, Vertical Position

Use [Cursor<l•] to adjust.

Cursor 'd Cursor•

Horizontal Position

to move PC to move PC

screen left screen right

Vertical Position

to move PC to move PC

screen down screen up

Clock, Phase

Use [Cursor _/•] to adjust the "Clock" setting to

stabilize the PC screen and the "Phase" setting to

improve the clarity of the PCscreen.

Cursor _ Cursor•

Clock

Phase

to decrease

setting value

to increase

setting value

i,71_

i L¸

ii!iiii_!i

ii !!i,i_iii

i i ¸

iiiii!i_

IZ!

6 Press [SETUP] to exit.

Note:

• Adjust the "Phase"setting after the "Clock"setting has

beenproperly adjusted.

• Youmay not obtain an appropriate screenwith auto

adjustment for some signals. In this case,adjust the

settings manually.

[]HDMI Audio

Youcansetthemethodofsoundinputfor the HDMI1inputjack,

Press [SETUP] to display the main menu.

2 Use [Cursor A/V] to select "DETAIL", then press

[ENTER].

3 Use [Cursor A/V] to select "HDMI1 Audio", then press

[ENTER].

Use [Cursor A/V] to select the desired sound input,

then press [ENTER].

Select if you have connected both

digital device to the HDMI1 input

Auto jack and analog device to the

audio sources. Digital audio input

signal will have priority.

HDMI1

Audio Select if you have connected a

Digital digital device to the HDMI1 input

jack for digital audio input signal.

Select if you have connected an

Analog analog device to the analog audio

jacks for analog audio input signal.

5 Press [SETUP] to exit,

[]Troubleshooting Guide

If the unit does not perform properly when operated as instructed in this owner's manual, check the following chart once

before calling for service.

No power

No picture or sound

No color

Sound OK, picture poor

Picture distorted

Weak picture

Lines or streaks in picture

Picture blurred

Ghosts in picture

Bars on TV screen

Picture rolls vertically

Different color marks on

TV screen

Poor reception on some

channels

Picture OK, sound poor

No reception of digital signals

Be sure the power cord is plugged in.

If a power failure occurs, unplug the power cord for 30 minutes to allow the unit to

reset itself.

• Check if the power is on.

• Check the outlet connection.

• Check the antenna or cable connection to the main unit.

• When the outside antenna is used, check the wire condition and connection.