Avanti WBV19DZ Manual de usuario

Marca: Avanti

Modelo: WBV19DZ

Categoría: Enfriadores de bebidas

Tipo: Manual de usuario

Este manual también es adecuado para

WCV38DZ

El Avanti WBV19DZ es un versátil enfriador de vinos y bebidas con dos zonas independientes que permite almacenar y enfriar diferentes tipos de bebidas a temperaturas óptimas. Con su elegante diseño y características prácticas, este enfriador es una excelente opción para cualquier hogar u oficina.

INSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

Model Numbers / Nos. de Modelos:

WBV19DZ

WCV38DZ

Wine and Beverage Center

Vinera / Enfriador de Bebidas

Dual Zone Wine Chiller

Vinera de Dos Zonas

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING

INSTRUCTIONS.

La sección en español empieza en la página 21.

Avanti Products has a policy of continuous improvement on its products and reserves the right to change materials and

specifications without notice.

Avanti Products, A Division of The Mackle Co., Inc.

P.O. Box 520604 - Miami, Florida 33152

www.avantiproducts.com

TABLE OF CONTENTS

Appliance Safety

Important Safeguides

Help Us Help You …

Parts and Features - Model WBV19DZ

Parts and Features - Model WCV38DZ

Important Safety Instructions

Electrical Connection

Extension Cord

Installation Instructions

Before Using Your Appliance

Installation of Your Appliance

Built-in Cabinet Instructions

Installing Stainless Steel Handle

Operating Your Appliance - WBV19DZ

Control Panel Lock

ON/OFF Power

Setting the Temperature Control

13 - 14

Storage

Interior Light

Door Lock

Operating Your Appliance - WCV38DZ

Control Panel Lock

ON/OFF Power

Setting the Temperature Control

15 - 16

Storage

Interior Light

Door Lock

Care and Maintenance

Cleaning Your Appliance

Power Failure

Moving Your Appliance

Energy Saving Tips

Charcoal Filtration System

Troubleshooting Guide

Service for Your Appliance

Wiring Diagram

Your Avanti Products Warranty

Instrucciones en Español

21 - 25

Registration Information and Registration Card

Last Page

APPLIANCE SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always

read and obey all safety messages.

This is the Safety Alert Symbol. This symbol alerts you to potential hazards that

can kill or injure you and others. All safety messages will follow the Safety

Alert Symbol and either the words “DANGER”, “WARNING” or “CAUTION”.

Danger means that failure to heed this

safety statement may result in severe

personal injury or death.

Warning means that failure to heed this

safety statement may result in extensive

product damage, serious personal injury, or

death.

Caution means that failure to heed this

safety statement may result in minor or

moderate personal injury, or property or

equipment damage.

All safety messages will alert you do what the potential hazard is, tell you how to reduce the chance of

injury, and let you know what can happen if the instructions are not followed.

IMPORTANT SAFEGUIDES

Before the appliance is used, it must be properly positioned and installed as

described in this manual, so read the manual carefully. To reduce the risk of fire,

electrical shock or injury when using the appliance, follow basic precaution,

including the following:

• Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and

do not use an extension cord.

• Replace all panels before operating.

• It is recommended that a separate circuit, serving only your appliance be provided. Use

receptacles that cannot be turned off by a switch or pull chain.

• Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or

explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of

this or any other appliance. The fumes can create a fire hazard or explosion.

• Before proceeding with cleaning and maintenance operations, make sure the power line of the

unit is disconnected.

• Do not connect or disconnect the electric plug when your hands are wet.

• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result

in electrical shock or death.

• Do not attempt to repair or replace any part of your appliance unless it is specifically

recommended in this material. All other servicing should be referred to a qualified technician.

FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

• Use two or more people to move and install appliance. Failure to do so can result in back or other

injury.

• To ensure proper ventilation for your appliance, the front of the unit must be completely

unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below

90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain,

water spray or drips.

• The appliance should not be located next to ovens, grills or other sources of high heat.

• The appliance must be installed with all electrical, water and drain connections in accordance with

state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in

accordance with the National Electrical Code and local codes and ordinances is required.

• Do not kink or pinch the power supply cord of appliance.

• The fuse (or circuit breaker) size should be 15 amperes.

• It is important for the appliance to be leveled in order to work properly. You may need to make

several adjustments to level it.

• Never allow children to operate, play with or crawl inside the appliance.

• Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may

damage or discolor the interior.

• Do not use this apparatus for other than its intended purpose.

HELP US HELP YOU...

Read this guide carefully.

It is intended to help you operate and maintain

your new unit properly.

Keep it handy to answer your questions.

If you don't understand something or you

need more assistance, please call:

Avanti Customer Service

800-220-5570

Keep proof of original purchase date (such as

your sales slip) with this guide to establish the

warranty period.

Write down the model and serial numbers.

You'll find them on a plate located on the rear

outside wall of unit.

Please write these numbers here:

____________________________________

Date of Purchase

____________________________________

Model Number

____________________________________

Serial Number

Use these numbers in any correspondence or

service calls concerning your unit.

If you received a damaged unit, immediately

contact the dealer (or builder) that sold you the

unit.

Save time and money. Before you call for

service, check the Troubleshooting Guide. It

lists causes of minor operating problems that

you can correct yourself.

IF YOU NEED SERVICE

We're proud of our service and want you to be

pleased. If for some reason you are not happy

with the service you receive, here are some

steps to follow for further assistance.

FIRST, contact the people who serviced your

unit. Explain why you are not pleased. In most

cases, this will solve the problem.

NEXT, if you are still not pleased, write all the

details, including your telephone number, and

send it to:

Customer Service

Avanti Products

10880 NW 30 Street

Miami, FL 33172 USA

CAUTION:

THESE UNITS ARE NOT

DESIGNED FOR THE STORAGE

OF MEDICINE OR OTHER

MEDICAL PRODUCTS.

PARTS & FEATURES

WBV19DZ – Wine & Beverage Center

Left Zone

Wine Chiller

Temperature Control

Interior Fan

Wine Bottle Shelves – Large – Total (5)

Wine Basket – Total (1)

Security Lock

Front Grille

Left Leveling Leg

Right Zone

Beverage

Cooler

Temperature Control

Interior Fan

Beverage Shelves – Total (3)

Beverage Basket – Total (1)

Security Lock

Right Leveling Leg

Door Handle – Right Zone

Door Handle – Left Zone

PARTS & FEATURES

WCV38DZ – Dual Zone Wine Chiller

Left Zone

Wine Chiller

Temperature Control

Interior Fan

Wine Bottle Shelves – Large – Total (5)

Wine Basket – Total (1)

Security Lock

Front Grille

Left Leveling Leg

Right Zone

Wine Chiller

Temperature Control

Interior Fan

Wine Bottle Shelves – Large – Total (5)

Wine Basket – Total (1)

Security Lock

Right Leveling Leg

Door Handle – Right Zone

Door Handle – Left Zone

IMPORTANT SAFETY INSTRUCTIONS



WARNING



To reduce the risk of fire, electrical shock,

or injury when using your appliance, follow

these basic precautions:

• Read all instructions before using the appliance.

• DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned

appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

• Before you throw away your old appliance: Take off the door. Leave the shelves

in place so that children may not easily climb inside.

• Never allow children to operate, play with, or crawl inside the appliance.

• Never clean appliance parts with flammable fluids. The fumes can create a fire

hazard or explosion.

• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity

of this or any other appliance. The fumes can create a fire hazard or explosion.

-Save these instructions-

 ELECTRICAL CONNECTION

This appliance should be properly grounded for your safety. The power cord of this appliance is

equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the

possibility of electrical shock.

Do not under any circumstances cut or remove the third ground prong from the power cord supplied.

For personal safety, this appliance must be properly grounded.

This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly

grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation

to have it replaced with a properly grounded 3-prong wall outlet.

The cord should be secured behind the appliance and not left exposed or dangling to prevent

accidental injury.

The appliance should always be plugged into its own individual electrical outlet which has a voltage

rating that matches the rating label on the appliance. This provides the best performance and also

prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never

unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from

the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise

damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the appliance, be careful not to damage the power cord.

 EXTENSION CORD

Because of potential safety hazards under certain conditions, it is strongly recommended that you do

not use an extension cord with this appliance. However, if you must use an extension cord it is

absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord

having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at

least 10 amperes.

Warning

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is

damaged, have it replaced by an authorized Avanti Products service center.

INSTALLATION INSTRUCTIONS

 BEFORE USING YOUR APPLIANCE

• Remove the exterior and interior packing.

• Check to be sure you have all of the following parts:

Model WBV19DZ

Wine / Beverage Center

Model WCV38DZ

Dual Zone Wine Chiller

Instruction Manual

Wine Bottle Shelves (Wire)

Wine Bottle Small Shelf (Wire)

Wine Bottle Shelf / Basket (Wire)

Beverage Shelves (Glass)

Keys

Storage Basket (Wire)

Keys

• Before connecting this appliance to the power source, let it stand upright for approximately 2

hours. This will reduce the possibility of a malfunction in the cooling system from handling

during transportation.

• Clean the interior surface with lukewarm water using a soft cloth.

 INSTALLATION OF YOUR APPLIANCE

• This appliance is designed to be for free standing installation or built-in (fully recessed).

• Place your appliance on a floor that is strong enough to support it when it is fully loaded. To

level your appliance, adjust the front leveling legs at the bottom of the appliance.

• Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator,

etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical

consumption. Extreme cold ambient temperatures may also cause the unit not to perform

properly.

• Avoid locating the unit in moist areas.

• Plug the appliance into an exclusive, properly installed-grounded wall outlet. Do not under

any circumstances cut or remove the third (ground) prong from the power cord. Any questions

concerning power and/or grounding should be directed toward a certified electrician or an

authorized Avanti Products service center.

 BUILT – IN CABINET INSTRUCTIONS

This unit is designed for both built-in or free standing installation. If you plan to use this unit in a built-

in application please follow the requirements shown to the right.

Cabinet Opening Dimensions

IN (min)

CM (min)

Width

24”

61 cm

Depth

24”

61 cm

Height

34 ½”

87.6 cm

 INSTALLING STAINLESS STEEL HANDLE

This wine chiller includes a stainless steel handle that is not required to operate this unit. To install the

handle please follow the below instructions:

1. Pull away the door gasket in the area where the handle is to be installed as shown below in

Illustration # 1. The gasket is easily displaced by hand, no tools are necessary.

2. Align the handle with the screws pre-installed on the backside of the door. Tighten the

screws using a Phillips head screwdriver until the handle sets both flush and secured tightly

against the door frame. (DO NOT overtighten as this will cause damage to the handle

assembly).

3. Replace the door gasket to its original position.

① Gasket ② Scre wdriver ③S/S Handle

MODEL WBV19DZ

OPERATING YOUR APPLIANCE

It is recommended you install the appliance in a place where the ambient temperature is between 72-

78 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures,

the performance of the unit may be affected. For example, placing your unit in extreme cold or hot

conditions may cause interior temperatures to fluctuate. The range of 40-65 degrees Fahrenheit may

not be reached.

Recommended Temperatures for Chilling Wine.

Red Wines

58 - 65 ºF

15 - 18 ºC

Dry / White Wines

48 - 57 ºF

10 - 14 ºC

Rose Wines

49 - 51 ºF

9 – 11 ºC

Sparkling Wines

40 - 47 ºF

5 - 8 ºC

Wine Chiller (Left Side / Zone) Control Panel

RED

WHITE

SPARKL

Beverage Center (Right Side / Zone) Control Panel

F/ C

 CONTROL PANEL LOCK

• Your appliance is equipped with an automatic Control panel lock function. This function will

prevent any unwanted changes to your temperature or power settings.

• The lock function will activate automatically 12 seconds after the last time a button is pushed on

the control panel.

• To unlock the control panel lock press and hold the (UP) and the (DOWN) buttons for 3 seconds

the control panel will beep and blink once indicating that the control panel is active and the

settings can be changed.

 ON/OFF POWER

To turn ON or OFF the appliance, press the button/mark and hold for 3 seconds.

Temperature Ranges by Side / Zone

WINE Chiller (LEFT SIDE)

40º - 65º F

5º - 18º C

BEVERAGE COOLER (RIGHT SIDE)

39º - 55º F

4º - 13º C

You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC

button/mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature

display window for each zone.

 SETTING THE TEMPERATURE CONTROL

You can control the internal temperature of each side/zone independently by using the control panel

for that side.

You can press the left side UP and DOWN buttons/marks to control the internal temperature of each

respective side / zone.

The degrees indicators will appear in the display window.

• The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button/mark

once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN

button/mark once.

NOTE:

• If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting

the unit. If you attempt to restart before this time delay, the appliance will not start.

• When you use the appliance for the first time or restart the appliance after having been shut off for

a long time, there could be a few degrees variance between the temperature you select and the

one indicated on the LED readout. This is normal and it is due to the length of the activation time.

Once the appliance is running for a few hours everything will be back to normal.

 STORAGE

Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able

to store may vary.

NOTE:

Capacity:

Wine Chiller / LEFT SIDE / ZONE: 19 Standard bottles

Beverage Center / RIGHT SIDE / ZONE: 66 Standard Cans

(54 Cans on the shelves / 12 Cans in the basket)

Bottle capacities are approximate maximums when storing traditional Bordeaux 750 ML bottles and

include bulk storage.

 INTERIOR LIGHT

• Interior lights are available in both zones.

• You can turn the interior light on in each zone by pushing the button marked with the “bulb”

symbol

or touch the mark .

The lights will turn off automatically if it remains ON for 10 minutes or more. You have to push the

button marked with the “bulb” symbol

or touch the mark again and the light will turn

back on.

 DOOR LOCK

Your unit is provided with a lock and key combination on each side..

The keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock

and turn it counterclockwise to unlock the door. To lock the door do the reverse operation making

sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.

MODEL WCV38DZ

OPERATING YOUR APPLIANCE

It is recommended you install the appliance in a place where the ambient temperature is between 72-

78 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures,

the performance of the unit may be affected. For example, placing your unit in extreme cold or hot

conditions may cause interior temperatures to fluctuate. The range of 40-65 degrees Fahrenheit may

not be reached.

Recommended Temperatures for Chilling Wine.

Red Wines

58 - 65 ºF

15 - 18 ºC

Dry / White Wines

48 - 57 ºF

10 – 14 ºC

Rose Wines

49 - 51 ºF

9 – 11 ºC

Sparkling Wines

40 - 47 ºF

5 - 8 ºC

Left Side / Zone Control Panel

RED

WHITE

SPARKL

Right Side / Zone Control Panel

SPARKL

WHITE

RED

F/ C

 CONTROL PANEL LOCK

• Your appliance is equipped with an automatic Control panel lock function. This function will

prevent any unwanted changes to your temperature or power settings.

• The lock function will activate automatically 12 seconds after the last time a button is pushed on

the control panel.

• To unlock the control panel lock press and hold the (UP) and the (DOWN) buttons for 3 seconds

the control panel will beep and blink once indicating that the control panel is active and the

settings can be changed.

 ON/OFF POWER

To turn ON or OFF the appliance, press the button/mark and hold for 3 seconds.

Temperature Ranges by Side / Zone

LEFT SIDE

40º - 65º F

5º - 18º C

RIGHT SIDE

40º - 65º F

5º - 18º C

You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC

button/mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature

display window for each zone.

 SETTING THE TEMPERATURE CONTROL

You can control the internal temperature of each side/zone independently by using the control panel

for that side.

You can press the left side UP and DOWN buttons/marks to control the internal temperature of each

respective side / zone.

The degrees indicators will appear in the display window.

• The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button/mark

once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN

button/mark once.

NOTE:

• If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting

the unit. If you attempt to restart before this time delay, the appliance will not start.

• When you use the appliance for the first time or restart the appliance after having been shut off for

a long time, there could be a few degrees variance between the temperature you select and the

one indicated on the LED readout. This is normal and it is due to the length of the activation time.

Once the appliance is running for a few hours everything will be back to normal.

 STORAGE

Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able

to store may vary.

NOTE:

LEFT SIDE / ZONE: 19 Standard bottles

RIGHT SIDE / ZONE: 19 Standard bottles

TOTAL 38 Standard bottles

Bottle capacities are approximate maximums when storing traditional Bordeaux 750 ML bottles and

include bulk storage.

 INTERIOR LIGHT

• Interior lights are available in both zones.

• You can turn the interior light on in each zone by pushing the button marked with the “bulb”

symbol

or touch the mark .

The lights will turn off automatically if it remains ON for 10 minutes or more. You have to push the

button marked with the “bulb” symbol

or touch the mark again and the light will turn

back on.

 DOOR LOCK

Your unit is provided with a lock and key combination on each side..

The keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock

and turn it counterclockwise to unlock the door. To lock the door do the reverse operation making

sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.

CARE AND MAINTENANCE

 CLEANING YOUR APPLIANCE

• Turn off the power, unplug the appliance, and remove all items including shelves.

• Wash the inside surfaces with a warm water and baking soda solution. The solution should be

about 2 tablespoons of baking soda to a quart of water.

• Wash the shelves with a mild detergent solution.

• Wring excess water out of the sponge or cloth when cleaning area of the controls, or any

electrical parts.

• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with

a clean soft cloth.

• Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless

steel with steel particles and rusting may occur.

 POWER FAILURE

• Most power failures are corrected within a few hours and should not affect the temperature of

your appliance if you minimize the number of times the door is opened. If the power is going to be

off for a longer period of time, you need to take the proper steps to protect your contents.

 MOVING YOUR APPLIANCE

• Remove all items.

• Securely tape down all loose items (shelves) inside your appliance.

• Tape the door shut.

• Be sure the appliance stays secure in the upright position during transportation. Also protect

outside of appliance with a blanket, or similar item.

 ENERGY SAVING TIPS

• The appliance should be located in the coolest area of the room, away from heat producing

appliances, and out of the direct sunlight.

 CHARCOAL FILTRATION SYSTEM

Your wine is a living object that breathes through the cork of its bottle. In order to preserve the quality

and taste of your fine wines, they must be stored at the ideal temperature and ambient

conditions.Your cellar is equipped with an active charcoal filtration system to ensure air purity, cooling

efficiency, and to maintain an odor free cabinet for the storage of your fine wines. The filter assembly

is located at the rear panel inside your cellar.

Keep in mind, that this filter must be changed every 12 months.

To replace your filter:

Remove the bottles / cans stored on the two (2)

shelves in front of the filter.

Remove the shelves and set aside to be replaced

once you have changed the filter

Hold the filter and turn it at 90 degrees in the anti-

clockwise direction and then pull it out.

Remove the existing filter and replace with a new

one.

Put the new filter into the hole and then turn the filter

at 90 degrees in clockwise direction..

PROBLEMS WITH YOUR APPLIANCE?

You can solve many common problems easily, saving you the cost of a possible service call. Try the

suggestions below to see if you can solve the problem before calling the servicer.

TROUBLESHOOTING GUIDE

PROBLEM

POSSIBLE CAUSE

Appliance does not operate.

Not plugged in.

The appliance is turned off.

The circuit breaker tripped or a blown fuse.

Appliance is not cold enough.

Check the temperature control setting.

External environment may require a higher

setting.

The door is opened too often.

The door is not closed completely.

The door gasket does not seal properly.

Turns on and off frequently.

The room temperature is hotter than normal.

A large amount of contents has been added to

the unit.

The door is opened too often.

The door is not closed completely.

The temperature control is not set correctly.

The door gasket does not seal properly.

The light does not work.

Not plugged in.

The circuit breaker tripped or a blown fuse.

The light button is “OFF”.

Vibrations.

Check to assure that the appliance is level.

The appliance seems to make too much noise.

The rattling noise may come from the flow of the

refrigerant, which is normal.

As each cycle ends, you may hear gurgling

sounds caused by the flow of refrigerant in your

appliance.

Contraction and expansion of the inside walls

may cause popping and crackling noises.

The appliance is not level.

The door will not close properly.

The appliance is not level.

The gasket is dirty.

The shelves are out of position.

Display flashes Error message “E0”

Connection failure – there is a wire or component

that is not connected correctly.

Contact the Avanti Service Department –

1 – 800 – 220 – 5570

Display flashes Error message “E1”

Temperature sensor failure.

Contact the Avanti Service Department –

1 - 800 – 220 - 5570

Display flashes Error message “E2”

Defrost sensor (Coil Sensor) failure.

Contact the Avanti Service Department –

1 - 800 – 220 - 5570

SERVICE FOR YOUR APPLIANCE

We are proud of our customer service organization and the network of professional service

technicians that provide service on your Avanti appliances. With the purchase of your Avanti

appliance, you can have the confidence that if you ever need additional information or assistance, the

Avanti Products Customer Service team will be here for you. Just call us toll-free.

AVANTI PRODUCTS CUSTOMER SERVICES

Product Information

800-323-5029

Whatever your questions are about our products,

help is available.

Part Orders

800-220-5570

You may order parts and accessories that will be

delivered directly to your home by personal

check, money order, Master Card, or Visa.

In-Home Repair Service

800-220-5570

An Avanti Products authorized service center will

provide expert repair service, scheduled at a time

that is convenient for you. Our trained servicers

know your appliance inside and out.

WIRING DIAGRAM

YOUR AVANTI PRODUCTS

WARRANTY

Staple your sales receipt here. Proof of original

purchase date is needed to obtain service under

warranty.

WHAT IS COVERED – LIMITED ONE-YEAR WARRANTY

Avanti Products warrants that the product is free from defects in materials and/or workmanship for a period of

twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run upon

the date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason whatsoever unless

described in detail in the warranty document. For one year from the date of purchase by the original owner,

Avanti products will, at its option, repair or replace any part of the product which proves to be defective in

material or workmanship under normal use. Avanti Products will provide you with a reasonably similar product

that is either new or factory refurbished. During this period Avanti Products will provide all parts and labor

necessary to correct such defects free of charge, so long as the product has been installed and operated in

accordance with the written instructions in this manual. In rental or commercial use, the warranty period is 90

days. All Avanti appliances of 4.2 cubic feet capacity or less must be brought/sent to the appliance service

center for repair.

LIMITED SECOND THROUGH FIFTH YEAR WARRANTY

For the second through the fifth year from the date of original purchase, Avanti Products will provide a

replacement compressor free of charge due to a failure. You are responsible for the service labor and freight

charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Costs

involved to move the product to the service center and back to the user’s home, as maybe required, are the

user’s responsibility.

WARRANTY EXCLUSIONS / WHAT IS NOT COVERED:

The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti

Products, including without limitation, one or more of the following:

•

A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes,

regulations, or laws, including failure to install the product in strict conformity with local fire and building codes

and regulations.

• Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand,

floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity,

lightning, power surges, structural failures surrounding the appliance, and acts of God.

•

Content losses of food or other content due to

spoilage.

• Incidental or consequential damages

• Parts and labor costs for the following will not be

considered as warranty:

•

Evaporator doors, door springs, and/or frames.

• Inner door panels, door shelves, door rails,

and/or door supports.

•

Chest freezer lid liners.

• Vegetable crispers.

•

Light bulbs and/or plastic housing.

•

Plastic cabinet liners.

• Punctured evaporator that voids the warranty on

the complete sealed system.

• Shipping and handling costs associated with the

replacement of the unit.

• Repairs performed by unauthorized servicers.

• Service calls that are related to external problems,

such as abuse, misuse, inadequate electrical

power, accidents, fire, floods, or any other acts of

God.

• Failure of the product if it is used for other than it

intended purpose.

• The warranty does not apply outside the

Continental USA.

• Surcharges including but not limited to, any after

hour, weekend, or holiday service calls, tolls, ferry

trip charges, or mileage expense for service calls to

remote areas.

In no event shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding

property, including cabinetry, floors, ceilings, and other structures and/or objects around the product. Also

excluded from this warranty are scratches, nicks, minor dents, and other cosmetic damages on external surfaces

and exposed parts; Products on which the serial numbers have been altered, defaced or removed; service visits

for customer education, or visits where there is nothing wrong with the product; correction of installation problems

(you are solely responsible for any structure and setting for the product, including all electrical, plumbing and/or

other connecting facilities, for proper foundation/flooring, and for any alterations including without limitation

cabinetry, walls, floors, shelving etc., as well as the resetting of breakers or fuses.

OUT OF WARRANTY PRODUCT

Avanti Products is under no obligation, at law or otherwise, to provide you with any concessions, including

repairs, pro-rates, or product replacement, once this warranty has expired.

WARRANTY – REFRIGERATION - COMPRESSOR

INSTRUCCIONES DE SEGURIDAD

ATENCION

INSTRUCCIONES PARA

LA CONEXION A TIERRA

Este aparato electrodoméstico debe estar conectado a tierra. En caso de un cortocircuito eléctrico, la

conexión a tierra reduce el riesgo de choque eléctrico proporcionando un cable a tierra con una

enchufe de conexión a tierra. Este enchufe debe estar conectado en un tomacorriente instalado

correctamente y conectado a tierra.

ADVERTENCIA – El uso inadecuado del enchufe de conexión a tierra puede resultar en un riesgo de

choque eléctrico. Consulte con un electricista o persona de reparaciones competente si no

comprenden bien las instrucciones de conexión a tierra o si existe alguna duda sobre si el aparato

esta conectado a tierra correctamente.

NO USE UN CORDON DE PROLONGACION ELECTRICA

Use un tomacorriente de pared exclusivo. No conecte su electrodoméstico a cordones de

prolongación eléctrica o junto a cualquier otro electrodoméstico en el mismo tomacorriente de pared.

ADVERTENCIA IMPORTANTE:

Un electrodoméstico vacío es una atracción muy peligrosa para los niños. Saque todas las

juntas, pestillos, tapas o puerta de todo electrodoméstico que no esté en uso, o tome alguna

medida para asegurar que no presente peligro.

INSTRUCCIONES DE INSTALACION

Saque los embalajes exteriores, limpie bien el exterior con un paño suave seco, y el interior con un

paño húmedo y tibio. Evite colocar el electrodoméstico cerca de una fuente de calor, luz de sol

directa, o lugar húmedo.

Ubicación

1. Seleccione un lugar con su piso fuerte y nivelado.

2. Evite la luz directa del sol o calor. La luz directa del sol puede afectar la capa de acrílico.

Las fuentes de calor en su proximidad provocarán un consumo mayor de electricidad.

OPERACION

Para evitar vibraciones, el compartimiento interior debe estar bien nivelado. La temperatura variará

dependiendo de la cantidad de botellas almacenadas y la frecuencia con que se abre la puerta.

Cuando el electrodoméstico no se use por un período largo, desconecte el enchufe y deje la puerta

entreabierta.

Nota: Espere entre 3 a 5 minutos antes de volver a encender si el funcionamiento ha sido

interrumpido.

Se recomienda que Ud coloque el electrodoméstico en un lugar donde la temperatura ambiental se

mantenga entre 23-25 grados centígrados.

Si la temperatura ambiental oscila afuera de esos límites, pueda afectar la temperatura de la caja.

Por ejemplo, si su unidad está situada en lugares donde hay temperaturas muy frías o calientes

también puede afectar la temperatura de la caja.

COMO INSTALAR LA MANIJA

Su unidad viene equipada con una manija de acero inoxidable que no es necesario instalar

para operar la unidad.

Para instalarla, separe el sello del posterior de la puerta.

Coloque la manija en su lugar designado utilizando los tornillos Phillips instalados

previamente en la factoria. Apriete los tornillos utilizando un destornillador Phillips (+).

Vuelve el sello a su posición original.

Temperaturas recomendadas para enfriar vinos:

Vinos tintos

15º - 18º C

58 – 65º F

Vinos blanco/seco

9º - 14º C

48 – 57º F

Vinos rosé/Zinfandel

10º - 11º C

49 – 51º F

Vinos blanco/espumante

5º - 8º C

40 – 47º F

Modelo: WBV19DZ – Vinera / Enfriador de Bebidas.

CONTROL – ZONA IZQUIERDA – VINERA

RED

WHITE

SPARKL

CONTROL – ZONA DERECHA – ENFRIADOR DE BEBIDAS

F/ C

ENCENDIDO/APAGADO

Para apagar el electrodoméstico, presione el botón (

) y manténgalo presionado por un mínimo de

3 segundos.

PANEL DE CONTROL DE SEGURIDAD

• El electrodoméstico está equipada con un Panel de Control de Seguridad de función

automática. Esta función previene cualquier cambio no deseado en el control de

temperatura.

• La función de seguridad se activará automáticamente 12 segundos después de la última vez

que cualquier botón del Panel de Control sea presionado.

• Para poder hacer cambios en el Panel de Control, presione y mantenga presionados los

botones (

↑ ) y (↓ ) por 3 segundos, el Panel del Control emitirá un sonido de “Beep” y

parpadeará una vez, indicando que el Panel de Control ha sido activado y que puede

efectuar cambios en los controles.

Operación

Oprima los botones marcado “↑ “ y “↓ “ localizados en el panel de controles para programar la

temperatura. Al presionar los botones marcados “

↑ “ o “↓ “ por primera vez, el indicador en la

pantalla mostrará la temperatura programada de fábrica o la más reciente.

Oprima el botón marcado (

↑) una vez y la temperatura aumentará un grado. Si Ud oprime el botón

marcado (

↓) una vez la temperatura bajará un grado.

Luz interior

La luz interior se controla manualmente y no funciona al abrir ni cerrar la puerta. Para prender o

apagar la luz, presione el boton marcado (

) de la luz ubicado en el panel de control. Si la luz

está prendida, por más de 10 minutos, se apagará automáticamente.

Rangos de temperature por zona

Vinera (Zona Izquierda)

40º - 65º F

5º - 18º C

Enfriador de bebidas (Zona Derecha)

39º - 55º F

4º - 13º C

Ud puede cambiar de grados Centígrados a Fahrenheit o viceversa, oprimiendo el boton marcado

ºF/C. En la pantalla digital para cada zona aparecerán los grados en color azul.

Modelo: WCV38DZ – Vinera de Dos Zonas

CONTROL – ZONA IZQUIERDA

RED

WHITE

SPARKL

CONTROL – ZONA DERECHA

SPARKL

WHITE

RED

F/ C

ENCENDIDO/APAGADO

Para apagar el electrodoméstico, presione el botón (

) y manténgalo presionado por un mínimo de

3 segundos.

PANEL DE CONTROL DE SEGURIDAD

• El electrodoméstico está equipada con un Panel de Control de Seguridad de función

automática. Esta función previene cualquier cambio no deseado en el control de

temperatura.

• La función de seguridad se activará automáticamente 12 segundos después de la última vez

que cualquier botón del Panel de Control sea presionado.

• Para poder hacer cambios en el Panel de Control, presione y mantenga presionados los

botones (

↑ ) y (↓ ) por 3 segundos, el Panel del Control emitirá un sonido de “Beep” y

parpadeará una vez, indicando que el Panel de Control ha sido activado y que puede

efectuar cambios en los controles.

Operación

Oprima los botones marcado “↑ “ y “↓ “ localizados en el panel de controles para programar la

temperatura. Al presionar los botones marcados “

↑ “ o “↓ “ por primera vez, el indicador en la

pantalla mostrará la temperatura programada de fábrica o la más reciente.

Oprima el botón marcado (

↑) una vez y la temperatura aumentará un grado. Si Ud oprime el botón

marcado (

↓) una vez la temperatura bajará un grado.

Luz interior

La luz interior se controla manualmente y no funciona al abrir ni cerrar la puerta. Para prender o

apagar la luz, presione el boton marcado (

) de la luz ubicado en el panel de control. Si la luz

está prendida, por más de 10 minutos, se apagará automáticamente.

COMO INSTALAR LA MANIJA

Su unidad viene equipada con una manija de acero inoxidable que no es necesario instalar

para operar la unidad.

Para instalarla, separe el sello del posterior de la puerta.

Coloque la manija en su lugar designado utilizando los tornillos Phillips instalados

previamente en la factoria. Apriete los tornillos utilizando un destornillador Phillips (+).

Vuelve el sello a su posición original.

Rangos de temperatura por zona

Zona Izquierda

40º - 65º F

5º - 18º C

Zona Derecha

40º - 65º F

5º - 18º C

Ud puede cambiar de grados Centígrados a Fahrenheit o viceversa, oprimiendo el boton marcado

ºF/C. En la pantalla digital para cada zona aparecerán los grados en color azul.

Cerradura de la puerta

Su unidad viene equipada con una combinación de cerradura y llave.

Las llaves (2) están dentro de la bolsa plástica junto al manual de instrucciones.

Introduzca la llave en la cerradura y gírela hacia la izquierda para abrir la puerta.

Para cerrarla, gire la llave hacia la derecha.

Quite la llave y colóquela en un lugar seguro para evitar que se pierda.

Descongelación

Su refrigerador para vinos ha sido diseñado con un sistema de descongelación de “ciclo automático”.

Las superficies refrigeradas del compartimiento para vinos se descongela automáticamente, durante

el ciclo “apagado” del control de enfriamiento (termostato). El agua descongelada del compartimiento

es eliminada automáticamente, encauzándola hacia una bandeja de goteo ubicado en el compresor.

La transferencia de calor del compresor evapora el agua.

NOTA:

Para remover las repisas corredizas, vacíe las repisas antes de sacarlas. Hálelas aproximadamente

un tercio hacia afuera hasta que la marca en el raíl se alinee con el poste plástico en ambos lados.

Levante cada repisa y sáquela suavemente de la unidad. Para reemplazar de nuevo la repisa, repita

los pasos anteriores en dirección opuesta.

CUIDADO Y MANTENIMIENTO

Limpieza

Para limpiar el interior, use un paño suave con una solución de una cucharada de bicarbonato de

sodio por cada cuarto de agua, o una solución de espuma de jabón suave, o un detergente suave.

Para lavar las rejillas, sáquelas deslizándolas con cuidado, y use una solución de detergente suave;

luego séquelas con un paño suave. Limpie el exterior con un paño húmedo suave y un poco de

detergente suave o productos de limpieza para electrodomésticos.

Período de vacaciones

Para períodos cortos de vacaciones, deje los controles en la posición normal. Durante ausencias

más largas;

(a) saque todo el contenido,

(b) desconecte el electrodoméstico del tomacorriente,

(d) deje la puerta abierta para evitar la formación de condensación, moho u olores.

Corte de corriente

La mayoría de los cortes de corriente se corrigen en una o dos horas y no afectarán las temperaturas

del electrodoméstico. Sin embargo, Ud. deberá reducir la cantidad de veces que abra la puerta

cuando la corriente esté apagada.

Si Ud. se muda

Saque o asegure todos los artículos dentro del electrodoméstico. Para evitar que los tornillos

nivelantes se averíen, gírelos completamente hacia la base.

ADVERTENCIA

Asegúrese de tener la puerta abierta completamente se Ud desea remover las repisas o moverlas

hacia adelante para extraer una botella.

Algunas reglas importantes para el uso correcto del electrodoméstico.

• Las bebidas se deben guardar en botellas cerradas.

• No sobrecargue el compartimiento interior.

• No abra la puerta a menos que sea necesario.

• Si el electrodoméstico se guardará sin uso por períodos largos, se sugiere que, luego de una

limpieza cuidadosa, se deje la puerta entreabierta para permitir que el aire circule dentro de la

caja y evitar una posible formación de condensación, moho u olores.

• Nunca cubra los estantes de los compartimientos refrigerados con papel de aluminio o cualquier

otro material para cubrir estantes que puedan obstruir la circulación del aire.

 SISTEMA DE FILTRACION DE CARBON

El vino es un objeto viviente y respira a través del corcho de la botella. Para conservar el sabor y

calidad de sus vinos, deben ser almacenados en la temperatura y las condiciones ambientales

ideales. Su vinera está equipada con un sistema de filtración de carbón para asegurar la pureza del

aire, la eficiencia del enfriamiento, y mantener el interior de la unidad libre de olores. El filtro está

localizado en el panel trasero del interior de la unidad.

Recuerde que el filtro necesita cambiarse cada 12 meses.

Como reemplazar el filtro de su vinera.

Remueva las botellas de las (2) repisas que cubren

el filtro.

Figura / Imagen para referencia

solamente.

Remueva las repisas y guárdelas hacia un lado

para reponerlas después de reemplazar el filtro.

Sujete el filtro y gírelo aproximadamente 90 grados

hacia la izquierda. Retire el filtro hacia fuera.

Remueva el filtro existente y reemplácelo con uno

nuevo.

Coloque el filtro en posición y gírelo

aproximadamente 90 grados hacia la derecha.

Registration Information

Thank you for purchasing this fine Avanti product. Please fill out this form and return it to the

following address within 100 days from the date of purchase and receive these important benefits:

Avanti Products, A Division of The Mackle Co., Inc.

P.O.Box 520604 – Miami, Florida 33152

 Protect your product:

We will keep the model number and date of purchase of your new Avanti product on file to

help you refer to this information in the event of an insurance claim such as fire or theft.

 Promote better products:

We value your input. Your responses will help us develop products designed to best meet

your future needs.

-------------------------------------------------------(detach here)-------------------------------------------------------------

Avanti Registration Card

Name

Model # Serial #

Address

Date Purchased Store / Dealer Name

City State Zip

E-mail Address

Area Code Phone Number

Occupation

Did You Purchase An Additional Warranty

As your Primary Residence, Do You:

 Extended

 Own  Rent

 None

Your Age:

Reason for Choosing This Avanti Product:

Please indicate the most important factors

That influenced your decision to purchase

this product:



under 18



18-25



26-30

 31-35  36-50  over 50

Marital Status:

 Married  Single



Price

 Product Features

 Avanti Reputation

 Product Quality

 Salesperson Recommendation

 Other: ___________________

 Friend / Relative Recommendation

 Warranty

 Other: ___________________

Is This Product Used In The:

 Home  Business

How Did You Learn About This Product:

 Advertising

 In-Store Demo

 Personal Demo

Comments:

WBV19DZ/WCV38DZ – VER4.0 08142012

PRINTED IN CHINA

Avanti WBV19DZ Manual de usuario

Marca: Avanti

Modelo: WBV19DZ

Categoría: Enfriadores de bebidas

Tipo: Manual de usuario

Este manual también es adecuado para

WCV38DZ

Descargar PDF

informe

En otros idiomas

English: Avanti WBV19DZ User manual

Avanti WBV19DZ Manual de usuario

Este manual también es adecuado para

Avanti WBV19DZ Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos