Omcan PT-CN-0390 Refrigerated Prep Tables Manual de usuario

Revised - 03/21/2022

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: [email protected]

www.omcan.com

Refrigerated Prep Tables

Models PT-CN-0390, 0580

Items 39592, 41145

Instruction Manual

2

Page

-------------------------------------------------------------------------------------------- 3

--------------------------------------------------------------------------- 4 - 5

--------------------------------------------------------------------------- 5 - 7

-------------------------------------------------------------------------- 7

-------------------------------------------------------------------------------------------- 8

--------------------------------------------------------------------------------------------- 8

----------------------------------------------------------------------------------------- 9

------------------------------------------------------------------------------- 9 - 10

---------------------------------------------------------------------------- 11 - 14

---------------------------------------------------------------------------- 15

------------------------------------------------------------------------------------------- 16 - 18

---------------------------------------------------------------------------- 19

Table of Contents

Section

Disclaimer

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Maintenance

Troubleshooting

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

Model PT-CN-0390 / Model PT-CN-0580

3

Disclaimer

OMCAN IS NOT RESPONSIBLE FOR

DIMINISHED COOLING OR ANY DAMAGES

DUE TO WATER LEAKS. WARRANTY IS VOID

IF THE AMBIENT ROOM TEMPERATURE

EXCEEDS 75°F AND 55% RELATIVE

HUMIDITY, AND THE APPLIANCE DRAIN IS

NOT CONNECTED DIRECTLY TO A FLOOR

DRAIN.

4

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan

and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or

negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct

operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the

machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of

the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the

external packaging, open carton to ensure all ordered items are within the box, and there is no concealed

damage to the machine. If the package has suered rough handling, bumps or damage (visible or concealed),

please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may

initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save

these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et

Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne

ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour

utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine

ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises

manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents

d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

5

General Information

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations

et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba

Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona

inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido

entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.

Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la

caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre

los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se

muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para

salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

Safety and Warranty

Position on a at, stable surface. A service agent/qualied technician should carry out installation and any

repairs if required. Do not remove any components or service panels on this product. Consult Local and

National Standards to comply with the following:

• Health and Safety at Work Legislation.

• Fire Precautions.

• IEE Wiring Regulations.

• Building Regulations.

6

Safety and Warranty

The appliance is intended for commercial use.

• DO NOT attempt to service the item yourself.

• DO NOT use damaged appliances. If you are in any doubt, consult Omcan.

• DO NOT use electrical appliances inside the appliance (e.g. heaters, ice-cream makers etc.), unless they

are of the type recommended by the manufacturer.

• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

• DO NOT use mechanical device or other means to accelerate the defrosting process, other than those

recommended by the manufacturer.

• DO NOT damage the refrigerant circuit.

• DO NOT stand or support yourself on the appliance or glass panel.

• DO NOT allow oil or fat to come into contact with the plastic components. Clean immediately if contact

occurs.

• DO NOT place combustion, explosive or volatile article, corrosive acid or alkali, or liquid into the unit.

• DO NOT use this appliance to store medical supplies.

• DO NOT use jet/pressure washers to clean the appliance.

• DO NOT allow children to play with the packaging, and destroy plastic bags safely.

• Always carry, store and handle the appliance in a vertical position and move by holding the base of the

appliance.

• Always switch o and disconnect the power supply to the unit before cleaning.

• Keep all packaging away from children. Dispose of the packaging in accordance with the regulations of

local authorities.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly

qualied persons in order to avoid a hazard.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• For indoor used only. Not suitable for installation in an area where a water jet could be used. Must not be

cleaned by a water jet.

• To guarantee safe operation, ensure that the appliance is set up and connected as described in the

instruction manual.

• Any repairs and work on the appliance should only be carried out by the customer service department.

• Do not store explosive substances such as aerosol cans with a ammable propellant in this appliance.

OMCAN IS NOT RESPONSIBLE FOR DIMINISHED COOLING OR ANY DAMAGES DUE TO WATER

LEAKS. WARRANTY FOR WATER LEAKS IS VOID IF THE AMBIENT ROOM TEMPERATURE EXCEEDS

75°F AND 55% RELATIVE HUMIDITY, AND THE APPLIANCE DRAIN IS NOT CONNECTED DIRECTLY TO

A FLOOR DRAIN.

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure

or other damages resulting from installation in non-commercial or residential applications. The right

is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as

possible.

1 YEAR PARTS AND LABOUR WARRANTY

7

Model PT-CN-0390 PT-CN-0580

Temperature -2 to 8°C / 28.4 to 46.4°F

Electrical 110V / 60Hz / 1

Capacity Power 190 W 290 W

Input Power 170 W 210 W

Refrigerant R134a, 230g

Consumption 2 kW/h

Capacity 390 L / 13.8 cu.ft. 580 L / 20.5 cu.ft.

Granite Thickness 1.2” / 30mm

Weight 216 lbs. / 98 kgs. 335 lbs. / 152 kgs.

Packaging Weight 249 lbs. / 113 kgs. 374.8 lbs. / 170 kgs.

Overall Dimensions 59.4” x 31.5” x 39”

1510 x 800 x 1000mm

79.7” x 31.5” x 39”

2025 x 800 x 1000mm

Interior Dimensions 41.4” x 24.8” x 23.2”

1052 x 630 x 589mm

61.5” x 24.8” x 28.7”

1562 x 630 x 729mm

Item Number 39592 41145

Technical Specications

Safety and Warranty

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of

without diculty.

In any case, for suitable recycling, we suggest disposing of the products separately (dierentiated

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

8

Operation

Installation

Turn on the unit by the switch, the control panel will display the current temperature inside the cabinet.

SETTING THE TEMPERATURE

By pressing the “SEL” button for one second, you will be able to read the set temperature. To change the

temperature, press “SEL” and then press the “UP” or “DOWN” arrows to either increase or decrease the

temperature as desired, conrm the new temperature by pressing “SEL”.

STORAGE OF FOODSTUFFS

In order to obtain the best possible function of the cabinet, it is necessary to observe the following:

• Place the merchandise into the unit only after it has achieved the desired operating temperature on the

display.

• Do not place uncovered hot foods or liquids inside the unit.

• Package or protect foods when possible.

• Do not block the air circulation with the foodstus.

• Avoid opening the doors/drawers for extended periods.

• Wait a few moments before reopening the doors/drawers once they have been opened.

• While stocking, only open and ll one drawer at a time to eliminate the risk of over balancing.

DEFROSTING

DEFROST TIMER

The electronic control panel automatically defrosts 4 times every 24 hours. The timer will reset to the time

of the initial start up. To modify the start time, press “DEF” for more than 5 seconds and the cycle will begin

immediately and continue 4 times every 24 hours.

POSITIONING

Ensure that in respect of the unit dimensions, the space around the unit is suitable for both operation and easy

maintenance. Place the cabinet on a at and level surface with it’s adjustable legs. If the unit has been placed

on its side, please keep the machine inactive for 2 hours so the condenser uid can settle. Do not position

close to any heat source, explosives or in the path of direct sunlight. Air circulation must be freely maintained

around the condensing unit. Failure to follow the above will cause damage to the unit and void the warranty.

ELECTRICAL CONNECTION

Check that the supply conforms to the requirements shown on the rating label. The connection must be

grounded. The supply cable should never be stretched or pinched, keep the cable away from contact with

liquids or heat sources. In the even of damage it must be replaced by Omcan.

9

Troubleshooting

Often, the malfunction of the unit is due to a simple cause and can be easily xed without contacting Omcan

for technical support. Please check the following:

If the cabinet does not operate, make sure that:

• The plug has been correctly inserted into the socket.

• The supply cord is not damaged.

If the required temperature is not reached, make sure that:

• The command switch is turned on.

• The electronic control panel is correctly regulated.

• The cabinet is not in the defrosting phase or the post defrosting phase.

Maintenance

INITIAL CLEANING

Before use, all parts of the cabinet should be cleaned.

For the walls and all the internal parts: use an antibacterial detergent.

For the plastic parts: use a moistened cloth.

Dry with a soft, clean cloth. Use little to no water.

Do not use harsh or abrasive solvents or detergent.

Always wear protective gloves when cleaning.

PERIODIC CLEANING

For hygienic reasons and for improved performance, clean the internal basin at least once a week. To do so,

perform a defrost timer reset, when the defrost has completed, turn o the power and unplug the unit. Clean

the unit as stated in “Initial Cleaning”.

CLEANING OF CONDENSER

For improved performance, clean the condenser at least once a week. Before cleaning, turn o the machine

and disconnect from the power supply.

• Unscrew, rotate and remove the protective grill.

• Remove the dust on the front surface by using a brush and a vacuum cleaner, then reattach the protective

grill.

PERIODS OF INACTIVITY

During periods of inactivity, remove all products from inside the cabinet and follow these instructions.

• Remove the plug from the power supply and carefully clean the unit as stated in “Periodic Cleaning”.

• Cover the cabinet with a cloth that allows air circulation in the interior.

10

Troubleshooting

• The evaporator is not covered with frost.

• The condenser is not blocked with dust.

• The cabinet is not located near heat sources or its condensing unit has uninterrupted air ow.

• The stored foods or other objects do not inhibit the proper closing of the unit.

• The cabinet is not working in proper working conditions (overloaded, hot food, blocked circulation, ect.).

If the cabinet leaks water, make sure that:

• The collecting container, or the device for condensing water elimination are not damaged.

• The discharge outlets are not blocked or obstructed.

• The cabinet has been properly levelled.

• The door seal heater is operating.

If the cabinet is unusually noisy, make sure that:

• The frame does not have any loose screws or bolts.

• The cabinet has been place in a at, stable position.

If after all the above has been followed that the malfunction continues, it is advised that you call Omcan for

service. Be prepared to supply the following information:

• The model name.

• The item number.

• The serial number.

• The error code being displayed on the control panel.

All spare parts must be replaced by Omcan or an Omcan authorised service company

11

Parts Breakdown

Model PT-CN-0390 39592

12

Parts Breakdown

Model PT-CN-0390 39592

Item No. Description Position Item No. Description Position Item No. Description Position

AF205 Body for 39592 1 AF221 Front Support Right for 39592 17 AF235 Filter Drier for 39592 33

AF206 Door Right for 39592 2 AF222 Back Support Right for 39592 18 AF236 Capillary for 39592 34

AF207 Door Left for 39592 3 AF223 Evaporator Cover for 39592 19 AF237 Filter for 39592 35

AF208 Gasket for 39592 4 AF224 Top for 39592 20 AF238 Unit Board for 39592 36

AF209 Up Hinge Right for 39592 5 AF225 Sensor for 39592 21 AD819 Power Cord for 39592 37

AF210 Door Spring for 39592 6 AF226 Probe Padding for 39592 22 AF239 Water Box for 39592 38

AF211 Down Hinge Right for 39592 7 AF227 Fan Support for 39592 23 AF240 Front Panel Up Hinge for 39592 39

AF212 Down Hinge Left for 39592 8 AD825 Condenser Fan for 39592 24 AF241 Water Box Protector for 39592 40

AF213 Up Hinge Left for 39592 9 AF228 Evaporator for 39592 25 AF242 Clip for 39592 41

AF214 Fixed Front Panel for 39592 10 AE752 Grill for 39592 26 AF243 Front Panel Down Hinge for 39592 42

AF215 Air Flow Conduct Board for 39592 11 AF229 Compressor for 39592 27 AF244 Front Panel for 39592 43

AF216 Set Guide Left for 39592 12 AF230 Hot Pipe for 39592 28 AD829 Main Switch for 39592 44

AF217 Shelf for 39592 13 AF231 Condenser Fan for 39592 29 AD818 Thermostat for 39592 45

AF218 Set Guide Right for 39592 14 AF232 Condenser Fan Blade for 39592 30 AF245 Lock for 39592 46

AF219 Front Support Left for 39592 15 AF233 Basket Guard Grills for 39592 31 AF246 Foot for 39592 47

AF220 Back Support Left for 39592 16 AF234 Condenser for 39592 32 AF247 Water Box for 39592 48

13

Parts Breakdown

Model PT-CN-0580 41145

14

Parts Breakdown

Model PT-CN-0580 41145

Item No. Description Position Item No. Description Position Item No. Description Position

AF248 Body for 41145 1 AF221 Front Support Right for 41145 17 AF235 Filter Drier for 41145 33

AF249 Door Right for 41145 2 AF222 Back Support Right for 41145 18 AF236 Capillary for 41145 34

AF250 Door Left for 41145 3 AF223 Evaporator Cover for 41145 19 AF237 Filter for 41145 35

AF208 Gasket for 41145 4 AE751 Marble Countertop for 41145 20 AF238 Unit Board for 41145 36

AF209 Up Hinge Right for 41145 5 AF225 Sensor for 41145 21 AD819 Power Cord for 41145 37

AF210 Door Spring for 41145 6 AF226 Probe Padding for 41145 22 AF239 Water Box for 41145 38

AF211 Down Hinge Right for 41145 7 AF227 Fan Support for 41145 23 AF240 Front Panel Up Hinge for 41145 39

AF212 Down Hinge Left for 41145 8 AD825 Condenser Fan for 41145 24 AF241 Water Box Protector for 41145 40

AF213 Up Hinge Left for 41145 9 AF228 Evaporator for 41145 25 AF242 Clip for 41145 41

AF214 Fixed Front Panel for 41145 10 AE752 Grill for 41145 26 AF243 Front Panel Down Hinge for 41145 42

AF251 Air Flow Conduct Board for 41145 11 AF252 Compressor for 41145 27 AF244 Front Panel for 41145 43

AF216 Set Guide Left for 41145 12 AF230 Hot Pipe for 41145 28 AD829 Main Switch for 41145 44

AF217 Shelf for 41145 13 AF231 Condenser Fan for 41145 29 AD818 Thermostat for 41145 45

AF218 Set Guide Right for 41145 14 AF232 Condenser Fan Blade for 41145 30 AF245 Lock for 41145 46

AF219 Front Support Left for 41145 15 AF233 Basket Guard Grills for 41145 31 AF246 Foot for 41145 47

AF220 Back Support Left for 41145 16 AF234 Condenser for 41145 32 AF247 Water Box for 41145 48

15

Electrical Schematics

Model PT-CN-0390 39592

Model PT-CN-0580 41145

16

Notes

________________________________________________________________________________________

17

Notes

________________________________________________________________________________________

18

Notes

________________________________________________________________________________________

19

Warranty Registration

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,

cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear o the card at

the perforation and then send to the address specied below. You can also register online by visiting:

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

https://omcan.com/warranty-registration/

or email to: [email protected]

Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No



Por correo en Canadá

Pour postale au Canada

For mailing in Canada

Por correo en los EE.UU.

Pour diusion aux États-Unis

For mailing in the US

OMCAN

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

Niagara Falls, New York

USA, 14305

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North

American food service industry. Our success over these many years can be attributed to our commitment

to strengthen and develop new and existing relationships with our valued customers and manufacturers.

Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 6,500 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et

matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces

nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles

et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en

Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et

développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 6500

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros

de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir

a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos

clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan

continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor

excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un

fácil acceso a más de 6,500 productos con origen a nivel mundial.

Omcan PT-CN-0390 Refrigerated Prep Tables Manual de usuario

Omcan PT-CN-0390 Refrigerated Prep Tables Manual de usuario

en otros idiomas

Artículos relacionados

Otros documentos