Omcan 45599 Manual de usuario

Revised - 05/29/2018

^Only 45599 is

QPS approved.

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: [email protected]

www.omcan.com

Convection Ovens

Models CE-CN-0021, 0047, 0066

Items 43217*, 43218

+, 45599

♦

Instruction Manual

*

+

♦

^

2

Page

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 6

-------------------------------------------------------------------------- 6

----------------------------------------------------------------------------------------- 6 - 8

----------------------------------------------------------------------------------------- 8

-------------------------------------------------------------------------------- 8 - 9

------------------------------------------------------------------------------ 9 - 11

---------------------------------------------------------------------------- 12

------------------------------------------------------------------------------------------- 13 - 14

---------------------------------------------------------------------------- 15

Table of Contents

Section

General Information

Safety and Warranty

Technical Specications

Operation

Maintenance

Troubleshooting

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

Model CE-CN-0021 / Model CE-CN-0047 / Model CE-CN-0066

3

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan

and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or

negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct

operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the

machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of

the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the

external packaging, open carton to ensure all ordered items are within the box, and there is no concealed

damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),

please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may

initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save

these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et

Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne

ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour

utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine

ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises

manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents

d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

4

General Information

Safety and Warranty

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. READ ALL INFORMATION BEFORE USE.

2. For commercial use only.

3. Do not touch hot surfaces.

4. Protect against electrical shock by keeping all cords, plugs, and other electrical components away from

water or other liquids.

5. Unplug this unit when not in use and before cleaning.

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations

et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba

Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona

inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido

entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.

Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la

caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre

los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se

muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre leer y familiarizarse con todas las instrucciones de

operación y seguridad.

Omcan quisiera darles las gracias por la compra de esta máquina. Es de la máxima importancia para

guardar estas instrucciones para referencias en el futuro. También guarde la caja original y el embalaje

para envío del equipo si el mantenimiento o la devolución de la máquina es necesaria.

5

Safety and Warranty

6. Allow the unit to cool before putting on or taking off parts.

7. Do not operate this or any appliance with a damaged electrical cord or plug.

8. Do not operate this or any appliance after it has malfunctioned or been damaged in any way.

9. Do not use outdoors.

10. Do not place on or near a hot gas or electric burner.

11. Attach plug to appliance rst, then plug electrical cord into the wall outlet.

12. Disconnect the unit by turning the temperature and timer control to “OFF” and “0”, then removing the

electrical plug from the wall outlet.

13. Do not use appliance for any application other than intended use.

14. Do not insert metal utensils or oversized foods into this unit as they may cause a re and heighten the risk

of electrical shock.

15. Do not store any item on top of this unit when in operation.

16. Do not allow this oven to touch or be covered by ammable material, such as curtains, draperies, walls,

etc., when in operation.

17. Do not clean with metal scouring pads as pieces can break off and touch electrical components,

heightening the risk of electrical shock.

18. Never place materials such as paper, cardboard, plastic, etc. in this oven.

19. Do not cover interior of this unit with metal foil as it may cause the oven to overheat.

20. Avoid scratching the surface or nicking the edges of this unit’s tempered, safety glass door. If the oven door

has a scratch or nick, contact customer service before use.

21. Turn the appliance off by turning the temperature and timer control to the “OFF” and “0” position.

22. Note that the use of accessories not recommended by the manufacturer may result in injury.

23. This appliance can be used by children aged from 8 years old and above and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been given

supervision or instruction concerning use of the appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by

children without supervision.

24. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly

qualied persons in order to avoid a hazard. The bread may burn, therefore do not use the toaster near or

below combustible material, such as curtains.

25. When using the appliance in shops, snack bars, hotels etc., check the voltage and outlet to make sure the

appliance is correctly connected with power.

26. Place unit on a at surface that is well ventilated. The appliances must be supervised during operation, DO

NOT leave appliance without powering off.

27. The connector must be removed before the appliance is cleaned and that the appliance inlet must be dried

before the appliance is used again.

28. The door or outer surface may get hot when the appliance is operating.

1 YEAR PARTS AND LABOR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

6

Operation

BEFORE USING YOUR OVEN

Before cooking anything in your oven for the rst time, please follow these simple instructions:

Using a small amount of detergent, wash the handle and roasting racks with soapy water. (NOTE: Do not use a

spray or abrasive polishing agent.) Gently wipe down interior walls with a damp cloth. While washing this unit,

do not to touch the electric heating element. Do not soak the inside of the oven with water.

After washing and thoroughly drying the surfaces noted above, place the roasting racks back inside the oven.

Close the oven door and preheat the oven to its highest temperature setting for 5 minutes.

Technical Specications

Model CE-CN-0021 CE-CN-0047 CE-CN-0066

Power 1440W 1600W 2800W

Number of Racks 3 4

Temperature Range 65 - 250°C / 150 - 500°F

Capacity 21L / 0.74 cu. ft. 47L / 1.65 cu. ft. 66L / 2.33 cu. ft.

Electrical 120V / 60Hz / 1 220V / 60Hz / 1

Adjustable Timer 0 - 120 mins

Weight 32.4 lbs. / 14.7 kgs. 43.4 lbs. / 19.7 kgs. 52 lbs. / 23.6 kgs.

Dimensions 20” x 18.7” x 15”

503 x 475 x 380mm

22.8” x 22.4” x 16”

580 x 570 x 406mm

22.8” x 22” x 20”

580 x 570 x 510mm

Item Number 43217 43218 45599

Safety and Warranty

Please see www.omcan.com/warranty.html for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of

without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

7

Operation

Turn off the heating elements and open the oven door in order to remove any smoky residue from inside the

oven. The heating elements are well lubricated and this initial use will help burn off the extra grease. A light

amount of smoke is normal during this process.

USING YOUR OVEN

To start your oven, you need to turn on the temperature dial to set your desired cooking temperature, and turn

on the timer dial to set the cooking time.

This appliance is intended to be operated by means of an external timer or separate remote-control system.

CAUTION: During the baking process, make sure that no metal accessory comes in contact with the

electric heating elements.

CAUTION: Foods baked in this oven will be hot. Wear protective hand coverings when reaching into

oven to retrieve food.

TYPICAL OPERATION SEQUENCE

ACTION RESULT

Plug in your oven. Power is connected but power light will go on after

turning the temperature dial.

Adjust temperature control knob. Heating indicator light comes on; heating elements

begin to heat up.

Temperature light shuts off. Oven has reached desired temperature.

Load product into oven. Product will begin to cook.

Set timer to desired cook time between 0-120 min. Timer starts timing down.

Timer reaches zero. Timer chimes.

Unload oven. Product will be cooked/hot; use caution removing it

from the oven.

TIMER

The range of the timer on this unit is 0-120 minutes. Turning the timer to the “0” position, the cooking time is

over and the timer will “ding” to alert.

If you need to reset the baking time while the oven is in operation, simply turn the timer to a new position. The

oven will reset the time according to the revised requirement without needing to be turned off.

When the set baking time has been reached, the oven will chime.

TEMPERATURE CONTROL KNOB

The temperature range of this unit is 150 - 500 Fahrenheit Degree for all models. This thermostatic switch

8

Operation

Maintenance

Troubleshooting

controls the temperature inside the oven and helps to maintain the proper temperature during various heating,

roasting, and baking applications.

POWER AND TEMPERATURE INDICATOR LIGHT

Anytime this appliance is connected to the power supply with the temperature knob turned on, the power and

heating indicator light will be on and the fan motor will begin to operate.

PROTECTION COMPONENT

If the temperature of this oven reaches an unsafe limit, the electrical components will shut off and it will stop

operating in order to prevent overheating.

CLEANING AND MAINTAINING YOUR OVEN

To clean, rst remove the power cord’s plug from the wall outlet. Wait for the oven to cool. Use a damp cloth

or sponge to gently wipe down the inside of the oven. Avoid soaking the inside of the oven or washing it in

running water as this will cause serious damage to the unit.

The food racks and food trays are good for dish washer machine, or just clean with soft cloth after

every use, then clean with dry cloth before putting back into the oven.

Problem Possible Solutions

The oven does not become hot after being switched

on.

Be sure that the timer switch is set.

Be sure that the temperature control knob is set.

There is a metallic sound when the oven is in use. Do not attempt to dismantle the oven.

Contact your service agent right away to examine the

fan.

Food is often overcooked or burned, even when

cooked according to the recipe.

Check that the fan motor is operating normally.

Contact your service agent to examine the

temperature control knob.

9

Troubleshooting

REFERENCE

Item Number Model Number Description Manufacturer Model

Number

43217 CE-CN-0021

Convection Oven 120V/60HZ/1PH

1.4KW with 3 Chrome Shelve Manual

Control cETLus

FD-21

43218 CE-CN-0047

Convection Oven 120V/60HZ/1PH

1.6KW with 4 Chrome Shelve Manual

Control cETLus

FD-47

45599 CE-CN-0066

Convection Oven 220V/60HZ/1PH

2.8KW with 4 Chrome Shelve Manual

Control CE QPS

FD-66

Parts Breakdown

Model CE-CN-0021 43217

Item No. Description Position Item No. Description Position Item No. Description Position

62243 Shell for FD-21 1 62257 Middle Board for FD-21 18 62272 Inner Glass for FD-21 33

62244 Hinge Wheels for FD-21 2 62258 Heating Element for FD-21 19 62273 Hinge Assembly for FD-21 34

62245 Insulation for FD-21 3 62259 Fan Blade for FD-21 20 62274 Outer Glass for FD-21 35

62246 Exhaust Pipe for FD-21 4 62260 Connection Pole for FD-21 21 62275 Front Door Frame for FD-21 36

62247 Power Cord for FD-21 5 62261 Wind Board for FD-21 22 62276 Handle for FD-21 37

62248 Terminal for FD-21 6 62262 Sensor Fixture for FD-21 23 62277 Timer for FD-21 38

66166 Heat Insulation Board for FD-21 7 62263 Interior for FD-21 24 62278 Thermostat for FD-21 39

62249 Space Holder for FD-21 8 62264 Grid Screws for FD-21 25 62279 Control Panel for FD-21 40

62250 Wire Buckle for FD-21 9 62265 Feet for FD-21 26 62280 Heating Light for FD-21 41

62251 Rear Board for FD-21 11 62266 Bottom Board for FD-21 27 62281 Knob Spring Plate for FD-21 42

62252 Temperature Cut-Out for FD-21 12 62267 Up and Bottom Door Clip for FD-21 28 62282 Thermostat Knob for FD-21 43

62253 Motor for FD-21 13 62268 Door Seal for FD-21 29 62283 Power Light for FD-21 44

62254 Motor Base for FD-21 14 62269 Tray for FD-21 30 62284 Timer Knob for FD-21 45

62255 Motor Insulation for FD-21 16 62270 Tray Grid for FD-21 31 62285 Insulation Ties for FD-21 46

62256 Connection Plate for FD-21 17 62271 Left and Right Door Trim for FD-21 32 62286 Switch for FD-21 47

10

Parts Breakdown

Model CE-CN-0047 43218

Item No. Description Position Item No. Description Position Item No. Description Position

62287 Shell for FD-47 1 62292 Middle Board for FD-47 18 62300 Inner Glass for FD-47 33

62288 Hinge Wheels for FD-47 2 62293 Heating Element for FD-47 19 62301 Hinge Assembly for FD-47 34

62289 Insulation for FD-47 3 62259 Fan Blade for FD-47 20 62302 Outer Glass for FD-47 35

62246 Exhaust Pipe for FD-47 4 62260 Connection Pole for FD-47 21 62303 Front Door Frame for FD-47 36

62290 Power Cord for FD-47 5 62261 Wind Board for FD-47 22 66169 Handle for FD-47 37

62248 Terminal for FD-47 6 62262 Sensor Fixture for FD-47 23 62277 Timer for FD-47 38

66166 Heat Insulation Board for FD-47 7 62295 Interior for FD-47 24 62278 Thermostat for FD-47 39

62249 Space Holder for FD-47 8 62264 Grid Screws for FD-47 25 62304 Control Panel for FD-47 40

62250 Wire Buckle for FD-47 9 62265 Feet for FD-47 26 62280 Heating Light for FD-47 41

62291 Rear Board for FD-47 11 62296 Bottom Board for FD-47 27 62281 Knob Spring Plate for FD-47 42

62252 Temperature Cut-Out for FD-47 12 66167 Up and Bottom Door Clip for FD-47 28 62282 Thermostat Knob for FD-47 43

62253 Motor for FD-47 13 62297 Door Seal for FD-47 29 62283 Power Light for FD-47 44

62254 Motor Base for FD-47 14 66168 Tray for FD-47 30 62284 Timer Knob for FD-47 45

62255 Motor Insulation for FD-47 16 62298 Tray Grid for FD-47 31 62285 Insulation Ties for FD-47 46

62256 Connection Plate for FD-47 17 62299 Left and Right Door Trim for FD-47 32 62286 Switch for FD-47 47

Model CE-CN-0066 45599

Item No. Description Position Item No. Description Position Item No. Description Position

63901 Shell for FD-66 1 63915 Middle Board for FD-66 18 63930 Inner Glass for FD-66 33

63902 Hinge Wheels for FD-66 2 63916 Heating Element for FD-66 19 63931 Hinge Assembly for FD-66 34

63903 Insulation for FD-66 3 62259 Fan Blade for FD-66 20 63932 Outer Glass for FD-66 35

62246 Exhaust Pipe for FD-66 4 63918 Connection Pole for FD-66 21 63933 Front Door Frame for FD-66 36

63905 Power Cord for FD-66 5 62261 Wind Board for FD-66 22 66169 Handle for FD-66 37

62248 Terminal for FD-66 6 62262 Sensor Fixture for FD-66 23 62277 Timer for FD-66 38

66166 Heat Insulation Board for FD-66 7 63921 Interior for FD-66 24 62278 Thermostat for FD-66 39

62249 Space Holder for FD-66 8 62264 Grid Screws for FD-66 25 62304 Control Panel for FD-66 40

62250 Wire Buckle for FD-66 9 62265 Feet for FD-66 26 63938 Heating Light for FD-66 41

63909 Rear Board for FD-66 11 63924 Bottom Board for FD-66 27 62281 Knob Spring Plate for FD-66 42

62252 Temperature Cut-Out for FD-66 12 66167 Up and Bottom Door Clip for FD-66 28 62282 Thermostat Knob for FD-66 43

63911 Motor for FD-66 13 63926 Door Seal for FD-66 29 63941 Power Light for FD-66 44

62254 Motor Base for FD-66 14 66168 Tray for FD-66 30 62284 Timer Knob for FD-66 45

62255 Motor Insulation for FD-66 16 62298 Tray Grid for FD-66 31 62285 Insulation Ties for FD-66 46

62256 Connection Plate for FD-66 17 63929 Left and Right Door Trim for FD-66 32 62286 Switch for FD-66 47

11

Model CE-CN-0021 43217

Model CE-CN-0047 43218

Model CE-CN-0066 45599

Parts Breakdown

12

Model CE-CN-0021 43217

Model CE-CN-0047 43218

Model CE-CN-0066 45599

Electrical Schematics

13

Notes

________________________________________________________________________________________

14

Notes

________________________________________________________________________________________

15

Warranty Registration

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,

cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at

the perforation and then send to the address specied below. You can also register online by visiting:

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

www.omcan.com/warrantyregistration.html

or email to: [email protected]

Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No



Por correo en Canadá

Pour postale au Canada

For mailing in Canada

Por correo en los EE.UU.

Pour diffusion aux États-Unis

For mailing in the US

OMCAN

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

Niagara Falls, New York

USA, 14305

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North

American food service industry. Our success over these many years can be attributed to our commitment

to strengthen and develop new and existing relationships with our valued customers and manufacturers.

Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 3,500 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et

matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces

nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles

et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en

Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et

développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 3500

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros

de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir

a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos

clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan

continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor

excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un

fácil acceso a más de 3,500 productos con origen a nivel mundial.

Omcan 45599 Manual de usuario

Omcan 45599 Manual de usuario

en otros idiomas

Artículos relacionados

Otros documentos