Magnavox MWC20T6 Manual de usuario

Marca: Magnavox

Modelo: MWC20T6

Categoría: Reproductores de casete

Tipo: Manual de usuario

Este manual también es adecuado para

Owner’s Manual

6719DG

IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING

AFTER READING OWNER’S MANUAL,

PLEASE CALL

TOLL FREE 1-800-968-3429 OR VISIT OUR WEB SITE AT

http://www.SylvaniaConsumerElectronics.com

19 inch DVD TRIPLE COMBO

INSTRUCCIONES EN ESPAÑOL INCLUDAS

FEATURES

• Auto Channel Programming

• Timer Recording

1 year 8 events programmable

Daily/Weekly recording

• One Touch Recording

• Auto Clock Setting

• Screen Saver

• Auto Power On and Off

• Parental Lock

• Resume Play (DVD)

• Closed Caption Decoder

• Virtual Surround

PLEASE READ BEFORE USING THIS EQUIPMENT

P Owner's Manual

(1EMN21493)

P Remote Control

(NF101UD)

P AA batteries x 2

Owner's Manual

SUPPLIED ACCESSORIES

This unit comes with the following accessories. Please confirm that

all the accessories are included.

T0200UA(EN).QX3 06.1.25 6:25 PM Page 1

RECAUTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT

DANGEROUS VOLTAGE CONSTITUTING

A RISK OF ELECTRIC SHOCK IS

PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT

THERE ARE IMPORTANT OPERATING

AND MAINTENANCE INSTRUCTIONS

IN THE LITERATURE ACCOMPANYING

THE APPLIANCE.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

The caution marking is located on the rear of the cabinet.

MPORTANT SAFEGUARDS

1. Read instructions - All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions

should be followed.

Cleaning - Unplug the unit from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted ser-

vice and, that for some specific reason, such as the possibili-

ty of the loss of an authorization code for a CATV converter,

is not intended to be unplugged by the user for cleaning or

any other purpose, may exclude the reference to unplugging

the appliance in the cleaning description otherwise required

in item 5.

6. Attachments - Do not use attachments not recommended

by the unit manufacturer as they may cause hazards.

7. Water and Moisture - Do not use this unit near water - for

example, near a bath tub, wash bowl, kitchen sink, or laun-

dry tub, in a wet basement, or near a swimming pool, and

the like.

8. Accessories - Do not place this unit on an

unstable cart, stand, tripod, bracket, or table.

The unit may fall, causing serious injury to

someone, and serious damage to the appli-

ance. Use only with a cart, stand, tripod, brack-

et, or table recommended by the manufacturer,

or sold with the unit. Any mounting of the appli-

ance should follow the manufacturer’s instructions and

should use a mounting accessory recommended by the

manufacturer. An appliance and cart combination should be

moved with care. Quick stops, excessive force, and uneven

surfaces may cause the appliance and cart combination to

overturn.

Ameubles - Cet appareil ne doit être placé

que sur un meuble (avec ou sans roulettes)

recommandé par le fabricant. Si vous l’installez

sur un meuble à roulettes, déplacez les deux

ensembles avec précaution. Un arrêt brusque,

l’utilisation d’une force excessive et des sur-

faces irrégulières risquent de déstabiliser l’ensemble et de le

renverser.

9. Ventilation - Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reliable

operation of the unit and to protect it from overheating, and

these openings must not be blocked or covered. The open-

ings should never be blocked by placing the unit on a bed,

sofa, rug, or other similar surface. This unit should never be

placed near or over a radiator or heat register. This unit

should not be placed in a built-in installation such as a book-

case or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

10. Power Sources - This unit should be operated only from the

type of power source indicated on the marking label. If you

are not sure of the type of power supply to your home, con-

sult your appliance dealer or local power company. For the

units intended to operate from battery power, or other

sources, refer to the operating instructions.

11. Grounding or Polarization - This unit is equipped with a

polarized alternating-current line plug (a plug having one

blade wider than the other). This plug will fit into the power

outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing

the plug. If the plug should still fail to fit, contact your elec-

trician to replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

12. Power-Cord Protection - Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the appliance.

13. Outdoor Antenna grounding - If an outside antenna or

cable system is connected to the unit, be sure the antenna

or cable system is grounded so as to provide some protec-

tion against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA No.

70, provides information with respect to proper grounding of

the mast and supporting structure, grounding of the lead-in

wire to an antenna discharge unit, size of grounding conduc-

tors, location of antenna-discharge unit, connection to

grounding electrodes, and requirements for the grounding

electrode. (Fig. A)

PORTABLE CART WARNING

S3126A

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC - NATIONAL ELECTRICAL CODE

S2898A

SYMBOLE D'AVERTISSEMENT POUR

LES COMPOSANTES

APPAREIL ET MEUBLE A ROULETTES

S3126A

T0200UA(EN).QX3 06.2.3 11:13 AM Page 2

PRECAUTIONS

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellec-

tual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is

intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-

nications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

FCC WARNING-

This equipment may generate or use radio frequency energy. Changes or modifications to

this equipment may cause harmful interference unless the modifications are expressly approved in the

owner’s manual. The user could lose the authority to operate this equipment if an unauthorized change or

modification is made.

14. Lightning - For added protection for this unit receiver during

a lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the unit due to lightning and power-line surges.

15. Power Lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other elec-

tric light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

16. Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind

into this unit through openings as they may touch dangerous

voltage points or short out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the unit.

18. Servicing - Do not attempt to service this unit yourself as

opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified ser-

vice personnel.

19. Damage Requiring Service - Unplug this unit from the wall

outlet and refer servicing to qualified service personnel

under the following conditions:

a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the operat-

ing instructions. Adjust only those controls that are covered

by the operating instructions, as improper adjustment of

other controls may result in damage and will often require

extensive work by a qualified technician to restore the unit to

its normal operation.

e. If the unit has been dropped or damaged in any way.

f. When the unit exhibits a distinct change in performance, this

indicates a need for service.

20. Replacement Parts - When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock, injury to persons or other haz-

ards.

21. Safety Check - Upon completion of any service or repairs to

this unit, ask the service technician to perform routine safety

checks to determine that the unit is in proper operating con-

dition.

22. Heat - This unit product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

T0200UA(EN).QX3 06.2.3 11:13 AM Page 3

The serial number of this product may be found on the back of the unit. No other unit has the same serial

number as yours. You should record the number and other vital information here and retain this book as a

permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

NOTE ABOUT RECYCLING

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-

tions concerning chemical wastes.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE

LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQU'AU FOND.

LOCATION

For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place

for its installation:

• Shield it from direct sunlight and keep it away from sources of intense heat.

• Avoid dusty or humid places.

• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the

top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.

• Install unit in a horizontal position.

• Avoid locations subject to strong vibration.

• Do not place the unit near strong magnetic fields.

• Avoid moving unit to locations where temperature differences are extreme.

• Be sure to remove disc and unplug the AC power cord from the outlet before carrying the unit.

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our

Authorized Service Center for servicing.

• Do not put your fingers or objects into the unit disc loading tray.

• Do not place anything directly on top of the unit.

MOISTURE WARNING

• Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or

after heating a cold room or under conditions of high humidity. If you play a videotape or DVD in a moist

unit, it may damage the tape or DVD and the unit. When the condensation occurs inside the unit, turn the

unit on and leave it at least 2 hours to dry out.

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guide-

lines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system

of the building as close to the point of cable entry as practical.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service

this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.

DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

T0200UA(EN).QX3 06.2.3 11:13 AM Page 4

ABLE OF CONTENTS

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . .2

TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . .5

SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . .5

PREPARATION FOR USE . . . . . . . . . . . . . . . . . .6

ANTENNA/CABLE CONNECTIONS . . . . . . . . . . . .6

CONNECTING TO AN EXTERNAL DEVICE (FRONT)

. .6

CONNECTING TO A DIGITAL AUDIO DEVICE (REAR)

INSTALLING THE BATTERIES IN REMOTE CONTROL

OPERATING CONTROLS AND FUNCTIONS . . .8

TV/VCR SECTION

TV OPERATION AND SETTINGS . . . . . . . . . . . .9

WATCHING A TV PROGRAM . . . . . . . . . . . . . . . . .9

SLEEP TIMER / PICTURE CONTROL . . . . . . . . . . .9

CLOCK SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .10

DAYLIGHT-SAVING TIME . . . . . . . . . . . . . . . . . . .11

ON-SCREEN MENU LANGUAGE . . . . . . . . . . . . .11

CLOSED CAPTION SYSTEM . . . . . . . . . . . . . . . .11

V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .12

CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . . . . .13

ON-SCREEN DISPLAY . . . . . . . . . . . . . . . . . . .14

STATUS DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . .14

CHECKING THE STATUS . . . . . . . . . . . . . . . . . . .14

VIDEO CASSETTE . . . . . . . . . . . . . . . . . . . . . .15

PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .15

SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . .16

RENTAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . .16

AUTO REPEAT PLAYBACK . . . . . . . . . . . . . . . . . .16

SEARCH FUNCTION . . . . . . . . . . . . . . . . . . . .16

ZERO RETURN . . . . . . . . . . . . . . . . . . . . . . . . . . .16

PICTURE SEARCH . . . . . . . . . . . . . . . . . . . . . . . .17

TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . .17

INDEX SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . .17

RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . .18

NORMAL RECORDING . . . . . . . . . . . . . . . . . . . . .18

OTR (One Touch Recording) . . . . . . . . . . . . . . . . .18

AUTOMATIC TIMER RECORDING . . . . . . . . . . . .19

AUTO RETURN . . . . . . . . . . . . . . . . . . . . . . . . . . .21

AUTO REWIND-EJECT . . . . . . . . . . . . . . . . . . . . .21

COPYING A VIDEO CASSETTE (from another source)

.21

DVD SECTION

ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . .22

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . . .22

UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . .22

PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . .23

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .23

DISC MENU / TITLE MENU . . . . . . . . . . . . . . . . . .23

SPECIAL PLAYBACK FUNCTIONS & SETTINGS . . .

FUNCTION TABLE . . . . . . . . . . . . . . . . . . . . . . . .24

AUDIO MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . . . . . .25

ANGLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

BLACK LEVEL MENU . . . . . . . . . . . . . . . . . . . . . .26

V. S.S (Virtual Surround System) . . . . . . . . . . . . . .26

SEARCH MENU . . . . . . . . . . . . . . . . . . . . . . . . . .26

REPEAT PLAYBACK . . . . . . . . . . . . . . . . . . . . . . .27

PROGRAMMED PLAYBACK . . . . . . . . . . . . . . . . .28

RANDOM PLAYBACK . . . . . . . . . . . . . . . . . . . . . .28

ON-SCREEN INFORMATION . . . . . . . . . . . . . .28

CHANGING THE DVD SET UP ITEMS . . . . . . .29

CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . . . . . .29

INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

TROUBLESHOOTING GUIDE . . . . . . . . . . . . . .32

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . .34

APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

CABLE CHANNEL DESIGNATIONS . . . . . . . . . . .35

LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . .35

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . .36

ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . .37

WARRANTY . . . . . . . . . . . . . . . . . .BACK COVER

IMPORTANT SAFEGUARDS / TABLE OF CONTENTS

TV/VCRTV/VCR

QUICK

SYMBOLS USED IN THIS MANUAL

The following symbols below appear in some headings and notes in this manual, with the following meanings.

Description refers to TV/VCR

operation (in the TV/VCR mode).

Description refers to playback of

DVD video discs (in the DVD mode).

Description refers to playback of

audio CDs (in the DVD mode).

Description refers to the items

to be set by the QUICK mode

(in the DVD mode).

T0200UA(EN).QX3 06.2.3 11:13 AM Page 5

REPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

AUDIO OUT

COAXIAL

ANT.

Cable

TV signal

Antenna

ANT.

OUT

Rear of the unit

*NOTE

(DO NOT DISCONNECT FROM BOX)

Some cable TV systems use scrambled

signals and require a special converter to

receive these channels. Consult your local

cable company.

Incoming cable from home

Antenna / Cable Company

(No Cable Box)

Incoming cable from Cable Company

or Satellite Antenna

Cable Box or Satellite Box*

NOTE:

Before plugging the antenna into

the ANT. jack of the unit, check

that the pin is not bent. If it is bent,

straighten the pin as illustrated,

then plug the pin into the ANT. jack

of the unit.

Bent pin

Cable

Plug

(Needs to be

straightened)

(Straight pin)

For your safety and to

avoid damages to the unit,

unplug the antenna cable

from the ANT. jack before

moving the unit.

When you watch a program recorded on another source (VCR or video camera), use the

AUDIO/VIDEO input jacks on the front of the unit.

Connect the Audio/Video output jacks of another source to the AUDIO L/R and VIDEO

jacks of this unit.

Then use [SELECT] or [CH.

] until "AUX" appears on the screen.

HEADPHONE

VIDEO

AUDIOLR

DVD TV/VCR

SELECT

CHANNEL

REW

PLAY

F.FW D

STOP/EJECT

HEADPHONE

VIDEO

AUDIO

L R

VOLUME

POWER

REC/OTR

OPEN/CLOSESTOP

SKIP SKIP

PLAY

ex.

VCR or video

camera

, etc.

Front of the unit

Audio Cable (commercially available)

To the Audio output jacks

To the Video output jack

Video Cable (commercially available)

NOTE:

When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the monaural VCR

(another source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equally.

AUX

(OUT)

(IN)

(OUT)

(IN)

CONNECTING TO AN EXTERNAL DEVICE (FRONT)

Plug the incoming cable into the ANT. jack on the rear of the unit.

If your cable service supplies you with a converter box or if you use a satellite system, connect the box with

this unit as shown below.

T0200UA(EN).QX3 06.1.25 6:25 PM Page 6

AUDIO OUT

COAXIAL

ANT.

To Coaxial digital

Audio input jack

Audio coaxial digital cable

(commercially available)

To AUDIO OUT

COAXIAL jack

(DVD AUDIO OUT Only)

Dolby Digital

decoder

AUDIO OUT

COAXIAL

MD deck,

DAT deck, etc.

To Coaxial digital

Audio input jack

You can connect this unit to a digital audio device to enjoy the digital audio of DVD. Connect to an amplifier

equipped with digital input jacks, such as MD deck or DAT deck. To play a DVD disc in a Dolby Digital Multi-

channel surround format in this unit, connect to a Dolby Digital decoder.

Use an audio coaxial digital cable (commercially available) for the audio connections.

CONNECTING TO A DIGITAL AUDIO DEVICE (REAR)

(OUT)

(IN)

NOTES:

• The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an

MD or DAT deck.

• Be sure to turn off the power to all devices in the system before connecting another device.

• Refer to the Owner's Manuals for the devices to be connected to the unit.

• To connect to a MD or DAT deck, set "DOLBY DIGITAL" to "PCM" for the audio output in the setup mode, and to con-

nect to a Dolby Digital decoder, set to "BITSTREAM" (Refer to "AUDIO SETTING" on page 30). Playing a unit using

incorrect settings may generate noise distortion and may also damage the speakers.

21 3

INSTALLING THE BATTERIES IN REMOTE CONTROL

1) Open the battery compartment cover by pressing

the cover on the remote unit in the direction of

the arrow.

2) Insert 2 “AA” penlight batteries into the battery

compartment in the direction indicated by the

polarity (+/-) markings.

3) Replace the cover.

[BATTERY PRECAUTIONS]

•

Be sure to follow the correct polarity as indicat-

ed in the battery compartment. Reversed batter-

ies may cause damage to the device.

•

Do not mix different types of batteries together

(e.g. Alkaline and Carbon-Zinc) or old batteries

with fresh ones.

•

If the device is not to be used for a long period

of time, remove the batteries to prevent damage

or injury from possible battery leakage.

•

Do not try to recharge batteries not intended to

be recharged; they can overheat and rupture.

PREPARATION FOR USE

T0200UA(EN).QX3 06.1.25 6:25 PM Page 7

＊

[FRONT PANEL]

POWER Button

[TV/VCR P.9 / DVD P.23]

VOLUME

Buttons

[P.9]

SKIP H / G Buttons

[DVD P.26]

SEARCH E / D Buttons

[DVD P.23]

PLAY B Button

[TV/VCR P.15 / DVD P.23]

STOP C Button

[DVD P.23]

OPEN/CLOSE A Button

[DVD P.23]

Disc loading tray

DVD Indicator

SELECT Button

[TV/VCR P.9]

TV/VCR Indicator

CHANNEL

Buttons

[TV/VCR P.9]

Recording Indicator

REC/OTR Button

[TV/VCR P.18]

REW E Button

[TV/VCR P.15]

F.FWD D Button

[TV/VCR P.15]

STOP/EJECT C A Button

[TV/VCR P.15]

Remote sensor window

HEADPHONE Jack

VIDEO input Jack

[P.6]

AUDIO L/R input Jacks

[P.6]

Cassette compartment

[REMOTE CONTROL]

POWER Button

[TV/VCR P.9 / DVD P.23]

PICTURE/SLEEP Button

[TV/VCR P.9]

Number Buttons

[TV/VCR P.9 / DVD P.26]

DISPLAY Button

[TV/VCR P.14 / DVD P.28]

SPEED Button

[TV/VCR P.18]

PLAY B Button

[TV/VCR P.15 / DVD P.23]

REV E Button

[TV/VCR P.15 / DVD P.23]

SKIP H Button

[DVD P.26]

PAUSE F Button

[TV/VCR P.15 / DVD P.23]

TITLE Button

[DVD P.23]

CLEAR Button

[TV/VCR P.9 / DVD P.26]

MODE Button

[DVD P.24]

REC Button

[TV/VCR P16]

SELECT Button

[TV/VCR P.9]

CH.

Buttons

[TV/VCR P.9]

VOL.

Buttons

[TV/VCR P.9]

MUTE Button

[TV/VCR P.9]

SET-UP Button

[TV/VCR P.10 / DVD P.29]

FWD D Button

[TV/VCR P.15 / DVD P.23]

SKIP G Button

[DVD P.26]

STOP C Button

[TV/VCR P.15 / DVD P.23]

DISC MENU Button

[DVD P.23]

ENTER Button

[TV/VCR P.10 / DVD P.23]

/{ / B Buttons

[TV/VCR P.9 / DVD P.23]

RETURN Button

[TV/VCR P.10 / DVD P.25]

This button is not available on this model.

NOTES:

• We do not recommend the use of universal remote con-

trols as it does not control all the functions. Note that the

code number given by universal remote controls may

not program with this unit. For more details, contact the

manufacturer of the universal remote control.

• Unless stated, all operations described are based on

remote control use. Some operations can be carried

out using the menu bar on the TV screen.

PERATING CONTROLS AND FUNCTIONS

DVD TV/VCR

SELECT

CHANNEL

REW

PLAY

F.F WD

STOP/EJECT

HEADPHONE

VIDEO

AUDI O

L R

VOLUME

POWER

REC/OTR

OPEN/CLOSESTOP

SKIP SKIP

PLAY

12 4 5 6 107 1514983 3 412

21201918

1711 16

DVD buttonsDVD buttons TV/VCR buttonsTV/VCR buttons

POWER

PICTURE/

SLEEP

SELECT

REC

DISPLAY

+100

VOL.

SET-UP MUTE

SPEED

TV/VCR Audio

CH.

SLOW

PAUSE TITLE

CLEAR

MODE

ENTER

DISC MENU

RETURN

REV

PLAY

STOP

FWD

7 8 9

+10

＊

- REMOTE CONTROL -

- FRONT PANEL -

T0200UA(EN).QX3 06.1.25 6:25 PM Page 8

BRIGHT

–

PP PP PP PP PP PP PP CC PP PP PP PP PP PP PP

SLEEP 0 MINUTE

SLEEP TIMER SETTING

The Sleep Timer function is used to turn off the

unit without pressing

[POWER] after a desired time.

1 Press [PICTURE / SLEEP] to

display the Sleep Timer menu.

2 Within 5 seconds, set your desired sleep time

using

[s / B].

• [B]...Increase by 30 min. (Up to 120 min.)

•

[s]...Decrease by 30 min.

NOTE:

•To cancel the Sleep Timer, use [CLEAR] or [s / B]

to set the time to "0".

3 To confirm the remainder time to shutdown,

press

[PICTURE / SLEEP].

PICTURE CONTROL

1 Press [PICTURE / SLEEP]

repeatedly until desired control

is displayed.

2 Use [s / B] to adjust to your desired level within

5 seconds.

• Even if any power failure occurs, the unit will

retain its memory for this feature.

COLOR

TINT

SHARPNESS

BRIGHT

CONTRAST

to pale

to purple

to soft

to decrease brightness

to decrease contrast

to brilliant

to green

to clear

to increase brightness

to increase contrast

VOLUME 20

C C C C C C C C C C C C C C C C

1 After antenna or cable connection is

completed, connect the power cord into

a standard AC outlet.

2 Press [POWER] to turn on the unit.

3 Use [CH.

] or the Number buttons to

select your desired channel number.

4 Use [VOL.

] to adjust the volume.

Press

[MUTE] to instantly

mute the sound. Press it again

to restore the previous sound

level.

NOTE:

•Even if you turn off the unit in the DVD mode, the unit

will be in the TV/VCR mode when you turn it on again.

TO WATCH CABLE OR SATELLITE CHANNEL

If the unit is connected to a cable box or satellite

box, use

[CH. K / L] to select CH3 or CH4 accord-

ing to the output channel setting of the device and

select desired channel on that device.

TO WATCH EXTERNAL INPUT

When an external equipment is

connected to the front AUDIO/

VIDEO input jacks, press

[SELECT] or [CH. K / L] repeat-

edly until "AUX" appears on the

screen.

NOTE:

• If there is no signal input from the antenna terminal

and no operation for 15 minutes, the unit will turn

itself off automatically.

AUX

TV/VCRTV/VCR

V OPERATION AND SETTINGS

TV/VCR SECTION

WATCHING A TV PROGRAM

TV/VCRTV/VCR

OPERATING CONTROLS AND FUNCTIONS / TV OPERATION AND SETTINGS

TV/VCR SECTION

SLEEP TIMER / PICTURE CONTROL

You can set Sleep Timer and picture

adjustment with

[PICTURE / SLEEP].

• The menu changes as described below every time

you press [PICTURE / SLEEP].

Sleep Timer

BRIGHT

CONTRAST

COLOR

TINTSHARPNESS

To use the number buttons

•Single digit channels: (Ex. 02, 03, 04 and so on)

Press [0] first to select a single digit channel.

•Two digit channels: (Ex. 12, 38, 95 ...)

Press two digits directly.

•Tree digit channels: (Ex. 115, 125 ...)

Press

[+100] first, then press the last two digits.

T0200UA(EN).QX3 06.1.25 6:25 PM Page 9

- TV/VCR SETUP -

TIMER PROGRAMMING

B SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– SETTING CLOCK –

B AUTO CLOCK [ON]

AUTO CLOCK CH SEARCH

AUTO CLOCK CH [ 02 ]

MANUAL CLOCK SET

– SETTING CLOCK –

AUTO CLOCK [ON]

B AUTO CLOCK CH SEARCH

AUTO CLOCK CH [ 02 ]

MANUAL CLOCK SET

D.S.T. [OFF]

AUTOMATIC CLOCK SETTING

NOTES:

• If a cable converter box is being used, make sure it is

turned on.

•You must use the remote control for the clock setting.

• If the unit is connected directly to a cable converter

box or satellite box, the local PBS station must be

selected on the cable box itself and the unit must be

set to the output channel of the cable converter box

or satellite box (usually channel 3 or 4), to enable to

set up or correct the clock automatically.

1 Press [SET-UP].

Using

[

] select "SETTING

CLOCK", then press

[ENTER].

2 Press [ENTER] to select "ON".

3 Press [

] to select

"AUTO CLOCK CH SEARCH".

Then press

[ENTER].

• The unit begins searching for

the station which contains the

auto clock set signal. The

search for a signal may take up

to 20 seconds per channel.

• When the search has finished,

"_ _" appears at the lower left of

the screen.

NOTES:

• During AUTO CLOCK CH SEARCH, the picture may

be distorted.

• If no number appears on the TV screen, there are no

stations in your area which contain the Auto Clock

signal. Auto Clock Setting is not possible. Please use

Manual Clock Setting on this page.

4 Write down the numbers that appear on the

screen. They are the auto clock stations in your

area.

5 Press [RETURN] to go back to

"SETTING CLOCK" menu.

Press [

] to select

"AUTO CLOCK CH".

Use

[s / B] until you locate an

auto clock station number.

6 Press [SET-UP] to exit the menu.

NOTE:

• Once the unit is turned off, it will periodically check

and set the correct date and time.

– AUTO CLOCK CH SEARCH –

08 10 13

_ _

- TV/VCR SETUP -

TIMER PROGRAMMING

B SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

5:40 PM

CLOCK SET UP

Set the unit clock correctly for VCR timer

recording. We suggest that you should

set the clock manually when you first set up the

unit, then set the auto clock setting to "ON" to cor-

rect the time periodically.

NOTE:

• If you cannot receive a station with time signals, auto

clock setting is not available. Use manual setting only.

MANUAL CLOCK SETTING

In the example below, the clock is to be set to:

DATE: May 5th, 2006

SETTING TIME: 5:40PM

1 Press [SET-UP].

Use

[

] to point to

"SETTING CLOCK", then

press

[ENTER].

2 Use [

] to point to

"MANUAL CLOCK SET", then

press

[ENTER].

• If there is no local PBS station in

your area or on your cable sys-

tem, select "AUTO CLOCK" and press

[ENTER]

to turn "OFF" the function before this step.

3 Use [

] to set your

desired month, day, year, hour

and minute.

Use

[s / B] to move to

another item.

4 Press [SET-UP].

Although seconds are not

displayed, they begin counting

from 00 when you press

[SET-UP]. Use this feature to

synchronize the clock with the correct time.

NOTE:

• When unplugging the AC cord or if there is a power

failure for more than 3 seconds, you may have to

reset the clock.

TO CHANGE CLOCK SETTING

1 Follow steps 1 to 2 above.

2 Select the item you want to change using [

3 Enter correct numbers using [

4 Press [SET-UP] to start the clock.

TV/VCR SECTION

TV OPERATION AND SETTINGS

TV/VCRTV/VCR

– SETTING CLOCK –

AUTO CLOCK [ON]

AUTO CLOCK CH SEARCH

AUTO CLOCK CH [ 02 ]

B MANUAL CLOCK SET

D.S.T. [OFF]

– MANUAL CLOCK SET –

MONTH DAY YEAR

0 5 / 0 5 FRI 2 0 0 6

HOUR MINUTE

0 5 : 4 0 PM

– SETTING CLOCK –

AUTO CLOCK [ON]

AUTO CLOCK CH SEARCH

B AUTO CLOCK CH [ 08 ]

MANUAL CLOCK SET

D.S.T. [OFF]

T0200UA(EN).QX3 06.1.25 6:25 PM Page 10

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

B CAPTION [CAPTION1]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

B CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

CLOSED CAPTION SYSTEM

You can view specially labeled (cc) TV

programs, movies, news and pre-recorded

tapes with either a dialogue caption or text display.

1 Press [SET-UP].

Use

[

] to point to

"CAPTION".

2 Press [ENTER] repeatedly to

select your desired caption

mode.

•

CAPTION mode: You can watch dramas, movies and

news while captioning the dialogues and the contents

of news.

• TEXT mode: You can watch half screen text informa-

tion if you want.

*"CAPTION2" is usually used for a second language (if

available).

Press [SET-UP] to exit the menu.

NOTES:

•Even if any power failure, the unit will retain its mem-

ory for this feature.

• Some programs are not broadcasted with closed

captions. The unit is designed to provide error-free

closed captions with high quality antenna, cable and

VCR signals. Conversely, poor quality signals are

likely to result in caption errors or no captions at all.

• Common signal conditions which may cause caption

errors are listed below:

- Electric motor brush noise

- Weak snowy reception on TV screen

- Multiplex signal reception displaying picture

ghosts or airplane flutter

- Playback of poorly recorded or

worn VCR tapes

• If the unit displays a black box on

the TV screen, this means that

the unit is set to the TEXT mode.

To clear screen, select "CAP-

TION1", "CAPTION2" or "OFF".

TO CANCEL THE CLOSED CAPTION SYSTEM

1 Press [SET-UP]. Use [

] to point to

"CAPTION".

2 Press [ENTER] repeatedly to select "OFF".

3 Press [SET-UP] to exit the menu.

- TV/VCR SETUP -

TIMER PROGRAMMING

B SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

DAYLIGHT-SAVING TIME

TV/VCRTV/VCR

– SETTING CLOCK –

AUTO CLOCK [ON]

AUTO CLOCK CH SEARCH

AUTO CLOCK CH [ 02 ]

MANUAL CLOCK SET

B D.S.T. [ON]

Select this feature and the unit clock will

automatically advance one hour in April,

then reverse one hour in October.

•

First Sunday of April : At 2 AM, the clock imme-

diately changes to 3 AM. Any timer programming

you have set to occur between 2 AM and 3 AM will

be canceled.

•

Last Sunday of October : At 2 AM, the clock

immediately changes to 1 AM.

1 Press [SET-UP].

Use

[

] to point to

"SETTING CLOCK", then

press

[ENTER].

2 Use [

] to point to "D.S.T.".

3 Press [ENTER] to select "ON".

NOTE:

•To cancel the setting, select "OFF".

4 Press [SET-UP] to exit the menu.

TV OPERATION AND SETTINGS

TV/VCR SECTION

TV/VCRTV/VCR

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

B LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

ON-SCREEN MENU LANGUAGE

You can select the language of on-screen

menu among English, Spanish and French.

1 Press [SET-UP].

Use

[

] to point to

"LANGUAGE".

2 Press [ENTER] repeatedly to select "ENGLISH",

"ESPAÑOL" or "FRANÇAIS".

3 Press [SET-UP] to exit the menu.

NOTES:

• This function effects only the language on the screen

menu and not the audio source.

• If for some reason the menu is already in Spanish or

French, press [SET-UP], using [

] point to

"IDIOMA [ESPAÑOL]" or "LANGAGE [FRANÇAIS]",

then press

[ENTER] repeatedly to select desired lan-

guage, then press

[SET-UP].

TV/VCRTV/VCR

T0200UA(EN).QX3 06.1.25 6:26 PM Page 11

TV–PG [BLOCK]

B D [BLOCK]

L [BLOCK]

S [BLOCK]

V [BLOCK]

TV–Y [VIEW]

TV–Y7 ( ) [VIEW]

TV–G [VIEW]

B TV–PG (DLSV) [BLOCK]

TV–14 (DLSV) [BLOCK]

TV–MA ( LSV) [BLOCK]

TV–Y [VIEW]

B TV–Y7 ( ) [VIEW]

TV–G [VIEW]

TV–PG ( ) [VIEW]

TV–14 ( ) [VIEW]

TV–MA ( ) [VIEW]

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

B V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

ACCESS CODE

_ _ _ _

TV RATING SET UP

4 Use [

] to select a rating

that you wish to block.

Press [ENTER] repeatedly to

set it to "BLOCK" or "VIEW".

NOTES:

• When you select a rating and set

it to "BLOCK", the higher ratings

will be blocked automatically.

The lower ratings will be avail-

able for viewing.

• When you set the lowest rating to

"VIEW", all other ratings will be automatically avail-

able for viewing.

5 The TV-Y7, TV-PG, TV-14 and

TV-MA ratings have the option

of sub rating categories.

Use

[

] to select a rating

with sub-ratings, then press

[ENTER] twice.

6 Use [

] to select a sub-

rating, then press

[ENTER] to

set it to "BLOCK" or "VIEW".

NOTE:

•The blocked sub-ratings will

appear next to the rating cate-

gory in the "TV RATING" menu.

7 Press [SET-UP] to exit the menu.

Selection Rating Category Explanations

TV-Y7

FV Fantasy Violence

TV-PG, TV-14, TV-MA

Suggestive Dialog (TV-PG, TV-14 only)

L Coarse Language

S Sexual Situation

V Violence

Selection Rating Category Explanations

TV-Y Appropriate for all children

TV-Y7

Appropriate for children seven and older

TV-G General Audience

TV-PG Parental Guidance suggested

TV-14 Unsuitable for children under 14

TV-MA Mature audience only

V-CHIP SET UP

This feature enables parents to prevent

their children from watching inappropriate

material on TV. When you try to access a blocked

program, “PROTECTED PROGRAM by ...” mes-

sage appears on the TV screen.

NOTE:

•To change the rating, the TV

must be turned to an unprotect-

ed program. If the screen on the

right is displayed, change the

channel to a station that is not

protected.

1 Press [SET-UP].

Use

[

] to select

"V-CHIP SET UP", then press

[ENTER].

2 Use the Number buttons to

enter the access code.

•For the first time set-up or in

the event the unit has lost

power, enter the default code of 0000.

3 Use [

] to select "TV RATING", "MPAA

RATING" or "CHANGE CODE", then press

[ENTER].

Refer to the pages below to set up each item.

B TV–Y [VIEW]

TV–Y7 ( ) [VIEW]

TV–G [VIEW]

TV–PG ( ) [VIEW]

TV–14 ( ) [VIEW]

TV–MA ( ) [VIEW]

TV/VCRTV/VCR

PROTECTED PROGRAM

by TV-Y

TV/VCR SECTION

TV OPERATION AND SETTINGS

TV–Y [VIEW]

TV–Y7 ( ) [VIEW]

B TV–G [BLOCK]

TV–PG (DLSV) [BLOCK]

TV–14 (DLSV) [BLOCK]

TV–MA ( LSV) [BLOCK]

– V-CHIP SET UP –

B TV RATING

MPAA RATING

CHANGE CODE

P 12

P 13

T0200UA(EN).QX3 06.1.25 6:26 PM Page 12

CH 15

G [VIEW]

PG [VIEW]

PG–13 [VIEW]

B R [BLOCK]

NC–17 [BLOCK]

X [BLOCK]

NO TV SIGNALS

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

B CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

CHANGE ACCESS CODE

4 Use the Number buttons to

enter your desired access

code in the "NEW CODE",

then enter the same code in

the "CONFIRM CODE". When

completed, the menu will

return to "V-CHIP SET UP".

5 Press [SET-UP] to exit the menu.

NOTE:

•Your personal access code will be erased and will

return to the default (0000) when a power failure

occurs or when you turn off the power using a wall

switch. If you forget the code, unplug the power cord

for 10 seconds to restore the access code to 0000.

NEW CODE

X X X X

CONFIRM CODE

_ _ _ _

– CHANNEL SET UP –

ADD / DELETE CH (CATV)

B AUTO CH PROGRAMMING

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

B CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– CHANNEL SET UP –

B ADD / DELETE CH (CATV)

AUTO CH PROGRAMMING

ADDING/DELETING CHANNELS

You can add channels that was not memorized due

to the bad reception status and also delete chan-

nels you no longer receive or seldom watch.

1 Press [SET-UP].

Use

[

] to point to

"CHANNEL SET UP", then

press

[ENTER].

2 Use [

] to point to

"ADD/DELETE CH", then

press

[ENTER].

3 Use the Number buttons or

[CH.

] to select your

desired channel number.

(You can also use

[

] to

enter it.)

• Refer to page 9 on how to use

the Number buttons.

4 Press [ENTER] repeatedly. The channel number

changes to

red (deleted) or blue (added) every

time you press the button.

•To delete another channel, repeat steps 3 to 4.

5 Press [SET-UP] to exit the menu.

NOTE:

•To confirm that channel(s) has been deleted or

added, select it (them) using [CH.

ADD / DELETE

(Example: CH8)

MPAA RATING SET UP

4 Use [

] to point to your

desired item, then press

[ENTER] to select "BLOCK"

or "VIEW".

5 Press [SET-UP] to exit the menu.

Selection Rating Category Explanations

G General Audience

PG Parental Guidance suggested.

PG-13 Unsuitable for children under 13

R Restricted; under 17 requires acco-

mpanying parent or adult guardian

NC-17 No one under 17 admitted

X Mature audience only

CHANNEL SET UP

Channel presetting is necessary at the start or in case you moved the TV to a different area.

TV OPERATION AND SETTINGS

TV/VCR SECTION

TV/VCRTV/VCR

AUTO CHANNEL PROGRAMMING

1 Press [SET-UP].

Use

[

] to point to

"CHANNEL SET UP", then

press

[ENTER].

2 Use [

] to point to "AUTO

CH PROGRAMMING", then

press

[ENTER].

The tuner scans and memorizes all the active

channels in your area.

3 When the scanning is comple-

ted, the lowest memorized

channel is displayed.

If "NO TV SIGNALS" appears

on the TV screen, check the

antenna connection and try

again.

NOTES:

• The unit may recognize CATV channels to be TV

channels if reception condition is poor. In this case,

check the antenna connection and try "AUTO CH

PROGRAMMING" again.

•

Auto channel programming is NOT necessary

when connected to a cable box or satellite box.

Just select the channel for cable box or satellite

input (ex. CH3 or CH4) on the unit, then select

your desired channel on the cable box or satellite

box.

T0200UA(EN).QX3 06.1.25 6:26 PM Page 13

N-SCREEN DISPLAY

STATUS DISPLAY

TV/VCRTV/VCR

On screen display examples are shown

below.

1. VCR status

Displays the current VCR motion:

PLAY / STOP / REC / OTR / PAUSE / FF / REW

2. Tape speed (during recording)

Displays the tape speed: SP / SLP

3. Clock

4. Channel number

(in TV mode)

Displays the current channel number.

"AUX" is displayed in external input mode.

5. Tape counter (during playback or recording)

Shows the elapsed recording or playback time.

(Not available for a blank tape or blank portions

on the tape.) You can reset the counter by press-

ing

[CLEAR].

PLAY B 12:00AM

CH 123

SP COUNT 0:00:00

CHECKING THE STATUS

While receiving a broadcast or playing a

VHS tape, you can check the status dis-

played on the screen by pressing

[DISPLAY]. The

display will change as shown below each time you

press

[DISPLAY].

WHEN THE CLOSED CAPTION IS OFF

The display switches among VCR counter and clock.

WHEN THE CLOSED CAPTION IS ON

The display switches among VCR counter and clock.

STOP

SP COUNT 0:12:34

5:40PM

CH2

Display OFF CLOCK/COUNTER

display

*The display will disappear

after 5 seconds

STOP

COUNT 0:12:34

5:40PM

CH2

5:40PM

CH2

After 5 seconds

Display OFF

COUNTER display CLOCK display

TV/VCRTV/VCR

TV/VCR SECTION

T0200UA(EN).QX3 06.1.25 6:26 PM Page 14

IDEO CASSETTE

This unit will operate with any cassette that has the

mark. For best results, we recommend the

use of high-quality tapes. Do not use poor quality or

damaged tapes.

SELECTING TAPE SPEEDS

Before recording, select the tape speed from : SP

mode

(Standard Play) or SLP mode (Super Long

Play). You can also play a tape recorded in

LP mode

(Long Play).

ERASE PREVENTION

Break off the tab on the

back edge of the cassette

to prevent accidental eras-

ing of recording.

Cover the hole with plastic

tape to record on the tape

again.

NOTES:

• In the TV/VCR mode, if the cassette without tab is insert-

ed, playback will start automatically.

• If you press [REC/OTR] or [REC] when a cassette with-

out tab is inserted, the unit will eject it automatically.

Tab

Plastic Tape

ON SCREEN DISPLAY / VIDEO CASSETTE / PLAYBACK

TV/VCR SECTION

Tape Speed Recording/Playback time

T120 T160T60Type of tape

2 hours 2-2/3 hours1 hourSP mode

6 hours 8 hours3 hoursSLP mode

PLAY

STOP

REW

LAYBACK

BASIC PLAYBACK

TV/VCRTV/VCR

EJECT

TRACKING ADJUSTMENT

•Tracking adjustment will be set automatically when

you start playback (Digital tracking function).

• If noise lines (black and white streaks) appear on

the playback picture, use

[CH.

] until the

streaks disappear (Manual tracking adjustment).

This is available in Pause/Still/Slow mode, too.

•To release manual tracking mode, stop the tape

once and start playback again.

STILL PICTURE

• During playback, press [PAUSE F] to freeze the

picture.

You can advance the picture frame by frame by

pressing

[PAUSE F] repeatedly.

•To release the Still mode, press

[PLAY

SLOW MOTION

• During playback, press [PAUSE F] then press

[FWDD].

•To release the Slow mode, press

[PLAY

NOTE:

• If the unit keeps the slow mode or still mode for more

than 5 minutes, it will automatically enter the stop mode.

1 Insert a pre-recorded tape so that the

unit turns on automatically (Auto

Power On).

2 Select TV/VCR mode by pressing [SELECT].

NOTE:

• If the erase-prevention tab has been removed, the

unit will change the VCR mode and starts playbak

automatically.

3 To start playback,

press

[PLAY

NOTE:

•Even in the DVD mode, you can start the VCR play-

back if you press [PLAY

] on the front panel (of

the TV/VCR side).

4 To stop the playback,

press

[STOP

5 To rewind the tape,

press

[REVE].

To forward the tape,

press

[FWDD].

To stop winding, press

[STOP

6 To eject the tape from the unit,

press

[STOP/EJECT C A]

on the front panel.

T0200UA(EN).QX3 06.1.25 6:26 PM Page 15

COUNT 0:00:00

REPEAT PLAY B

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

–

USER’S SET UP

–

B RENTAL [ON]

REPEAT PLAY [OFF]

AUTO RETURN [OFF]

RENTAL PLAY B

PECIAL PLAYBACK

–

USER’S SET UP

–

RENTAL [OFF]

B REPEAT PLAY [ALL]

AUTO RETURN [OFF]

RENTAL PLAYBACK

TV/VCRTV/VCR

AUTO REPEAT PLAYBACK

TV/VCRTV/VCR

This function allows you to repeat a tape

indefinitely.

1 Press [SET-UP].

Use

[

] to point to

"USER’S SET UP", then press

[ENTER].

2 Use [

] to point to "REPEAT PLAY".

Press

[ENTER] repeatedly

until your desired selection

"ALL" or "BLANK" appears.

•

ALL: Repeat playback from the

beginning to the end of the tape.

• BLANK: Repeat playback from the beginning to a part,

which is blank for more than 10 seconds.

• OFF: Cancel repeat playback.

3 Press [SET-UP] to exit the menu.

4 Press [PLAY B] to start the

Repeat Play.

NOTES:

• If the rental mode is set to "ON", “RENTAL PLAY B”

display has priority.

• This setting will not change even if you turn off the

unit.

EARCH FUNCTION

ZERO RETURN

TV/VCRTV/VCR

This function allows you to search easily

a beginning point that you want to review

by rewinding or fast forwarding.

NOTE:

• Zero Return WILL NOT work on a blank tape or a blank

portion of a tape.

1 Rewind or forward the tape to the beginning

point at which you want to review.

2 Press [CLEAR] repeatedly to

set the counter to "0:00:00".

3 Press [PLAY B] for playback or [REC] for

recording.

Press

[STOP

] when playback or recording is

completed.

4 Press [SET-UP].

Use

[

] to point to "ZERO

RETURN", then press

[ENTER].

The unit will begin rewinding

and the counter will appear on the TV screen.

The tape will automatically stop when the

counter returns to 0:00:00 (approx.).

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

B ZERO RETURN

TIME SEARCH

INDEX SEARCH

TV/VCR SECTION

This function enables you to improve the

picture quality when playing back worn

cassettes such as rented tapes.

1 Press [SET-UP].

Use

[

] to point to

"USER’S SET UP", then press

[ENTER].

2 Use [

] to point to

"RENTAL".

Press

[ENTER] to select "ON".

NOTE:

•To cancel the setting, select "OFF" at this step.

3 Press [SET-UP] to exit the menu.

4 Press [PLAY B] to start

playback.

NOTE:

• This setting will not change even if you turn off the

unit.

T0200UA(EN).QX3 06.1.25 6:26 PM Page 16

INDEX SEARCH

0 3

TIME SEARCH

2 : 50

TIME SEARCH

TV/VCRTV/VCR

This function allows you to quickly

advance the tape to your desired posi-

tion simply by entering the exact amount of playback

time you want to skip.

In the example below: To watch a program before/

after 2 hour 50 minutes from the present position,

in either direction.

1 Press [SET-UP].

Use

[

] to point to "TIME

SEARCH", then press

[ENTER].

2 Use [

] until your desired

time appears.

To cancel the Time Search at

this point, press

[SET-UP].

NOTE:

• Time Search can be set up to a maximum of 9 hours

50 minutes (9:50) by 10 minutes at a time.

3 Use [

] to rewind or fast forward to the

specified point.

The time counts down during the search. When

the counter reaches "0:00:00", the tape will start

playback automatically.

TO CANCEL DURING TIME SEARCH

Press [STOP/EJECT C A] on the unit or [STOP

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

B TIME SEARCH

INDEX SEARCH

TV/VCRTV/VCR

This function allows you to index the

starting point to make it easy to reach

the point in either fast forward or rewind mode.

•Every time you start recording

, an index is marked

automatically. The index mark also works as the

starting point of Timer recording and OTR.

• The index mark will not be recorded if

[PAUSE

]

is used during recording.

• The time gap between making the index marks on

the tape should be greater than 1 minute for SP

recording, 2 minutes for LP recording and 3 min-

utes for SLP recording.

• In some cases, the index mark at the beginning of

video tape cannot be detected.

Example: You are watching program number 4 and

want to fast forward to program number 7. Skip

three programs.

Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 Pro.6 Pro.7

4321123

End of

the tape

Beginning of

the tape

CURRENT PLAYBACK PROGRAM

INDEX MARK

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

B INDEX SEARCH

1 Press [SET-UP].

Use

[

] to point to

"INDEX SEARCH", then press

[ENTER].

2 Use [

] until the number

of programs that you want to

skip appears.

3 Use [

]. The unit begins rewinding or fast

forwarding to the beginning of desired program.

4 When the search is completed, the unit will start

playback automatically.

• The numbers of Index Search can be set up to

20.

• This function is not available during recording.

TO CANCEL DURING INDEX SEARCH

Press [STOP/EJECT C A] on the unit or [STOP

PICTURE SEARCH

TV/VCRTV/VCR

This function is useful in finding or

skipping over a particular scene on a

tape. In this mode, the sound will be muted.

1 During playback, press [REV

] or [FWD

]

to view at a high speed (in forward/reverse).

2 Press [REV

] or [FWD

] again to view at

super high speed (in LP/SLP modes only).

NOTE:

•Tapes recorded in the SP or LP mode will normally

display a noise bar on the TV screen and the picture

may revert to black and white.

3 Press [PLAY

] to return to normal playback.

SPECIAL PLAYBACK / SEARCH FUNCTION

TV/VCR SECTION

T0200UA(EN).QX3 06.1.25 6:26 PM Page 17

ECORDING

NOTES:

• Insert a cassette tape with its erase-prevention tab in place.

• This unit cannot record the contents from the built-in DVD.

•You can ONLY watch the same TV program that is being

recorded.

NORMAL RECORDING

TV/VCRTV/VCR

1 Use [CH.

] or the Number

buttons

to select the channel to

be recorded.

NOTE:

• If the unit is connected to a cable box or satellite

box, the unit must be on CH3 or CH4. Select the

channel to be recorded on the cable box or satellite

box.

2 Press [SPEED] to select the

desired tape speed (SP/ SLP).

(Refer to "SELECTING TAPE

SPEEDS" on page 15.)

3 Press [REC] to start recording.

4 Press [PAUSE

] to tempo-

rarily stop recording unwanted

scenes.

Press

[PAUSE

] again or

[REC] to resume recording.

NOTE:

• If the recording is paused for more than 5 minutes,

the unit will automatically switch to the recording

mode to prevent tape damage.

5 Press [STOP

] to stop recording.

OTR (One Touch Recording)

TV/VCRTV/VCR

This function enables you to start record-

ing for specified length simply by press-

ing

[REC/OTR] on the unit.

1 Use [CH.

] or the Number buttons to

select the channel to be recorded.

NOTE:

• If the unit is connected to a cable box or satellite

box, the unit must be on CH3 or CH4. Select the

channel to be recorded on the cable box or satellite

box.

2 Press [SPEED] to select the desired tape speed

(SP/SLP).

(Refer to "SELECTING TAPE SPEEDS" on page 15.)

3 Press [REC/OTR] on the unit

repeatedly until your desired

length appears on the screen.

The recording time will increase

by 30 minutes up to 8 hours.

Recording starts immediately when you press

[REC/OTR].

NOTE:

• If you press [REC/OTR] when "8:00" is displayed,

the unit returns to the normal recording mode.

NOTES:

•Even if you press [POWER] during OTR, the unit

continues recording.

•You

cannot start OTR with the remote control.

• In the SLP mode, maximum recording time, assum-

ing the tape starts at the beginning, is 8 hours using

T-160 (or 6 hours using T-120).

• If the tape runs out before the end time, the unit will

switch to the stop mode immediately, eject the tape

and turn itself off.

•To show the remaining time of OTR, press

[DISPLAY]

on the remote control to display "OTR" on the TV

screen. (It will show up momentarily then disappear.)

TO CANCEL OTR IN PROGRESS

Press [STOP/EJECT C A] on the unit or [STOP

Time(s) Display Recording length

1 time (normal recording)

2 times 0:30 30 minutes

3 times 1:00 60 minutes

↓↓ ↓

17 times 8:00 480 minutes

CH 10

REC

PAUSE

OTR (2 : 30)

TV/VCR SECTION

T0200UA(EN).QX3 06.1.25 6:26 PM Page 18

TIMER REC STANDBY

– TIMER PROGRAMMING –

CH DATE BEGIN END

61 7/03 MON 7:30

8:50

- -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

61 7/03 MON 7:30

8:50

- - -/- - - - - -:- - -:- - - -

- TV/VCR SETUP -

B TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

RECORDING

TV/VCR SECTION

AUTOMATIC TIMER RECORDING

TV/VCRTV/VCR

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

61 -/- - - - - -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

5 Use [

] to set the desired

begin/end hour and minute.

Press

[

] to move to next item.

6 Use [

] until the desired

tape speed appears.

(Refer to "SELECTING TAPE

SPEEDS" on page 15.)

7 Press [ENTER] to complete setting.

•

To set another program, repeat steps 2 to 7.

•To correct the program while setting, press

[

]

to go back one step and use [

] to enter

the correct numbers.

• Press

[SET-UP] to exit the menu.

8 Press [POWER] to set automatic timer recording.

The recording indicator lights up.

NOTES:

•You MUST turn off the unit to activate automatic

timer recording.

• If power is not turned off and

you continue watching TV,

"TIMER REC STANDBY" starts

flashing on the TV screen 2 min-

utes before the programmed

start time.

• Make sure a cassette with erase-prevention tab is

inserted before turning off the unit. If the cassette does

not have the tab, it will be ejected when you press

[POWER] to turn off.

9 At the programmed start time, the unit begins

recording.

NOTES:

• The recording starts without turning on the TV screen.

• During recording, you can watch only currently being

recorded TV program or DVD playback.

Press

[POWER] and [SELECT] to select the desired

mode.

• If the tape runs out before the end time, the recording

stops immediately and the cassette will be ejected.

TO CONFIRM THE PROGRAM

1 Press [POWER] to turn on the unit.

(The Recording indicator turns off.)

2 Press [SET-UP].

Use

[

] to select "TIMER PROGRAMMING",

then press

[ENTER].

3 Confirm the details of programs that appear on

the TV screen.

4 Press [SET-UP] to exit the menu.

– TIMER PROGRAMMING –

CH DATE BEGIN END

61 EVRY MON -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

61 7/03 MON -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

You can set 8 programs to record on

specific days, daily or weekly within

1 year period.

In the example below, the timer is being set to record:

DATE: July 3rd, 2006

SETTING TIME: from 7:30PM to 8:50PM

CHANNEL: CH61

TAPE SPEED: SP

1 Press [SET-UP].

Use

[

] to select

"TIMER PROGRAMMING",

then press

[ENTER].

NOTE:

• If you have not yet set the clock, "MANUAL CLOCK

SET" menu appears. Set to the present time and

date (refer to "MANUAL CLOCK SETTING" on page

10) then start setting the timer recording.

2 Use [

] to select the

desired program position, then

press

[

3 Use [

] until the desired

channel number appears, then

press

[

NOTE:

•If the unit is connected to a cable box or satellite box,

the unit must be on CH3 or CH4. Select the channel

to be recorded on the cable box or satellite box.

4 Set the starting date.

For once recording :

Press [

] until the desired

date appears. Then press

[

For every day recording :

To record the same channel

at the same time every day.

Press [

] until "EVRY DAY"

appears, then press

[

For weekly recording :

To record the same channel

at the same time every week.

Press [

] until "EVRY" and

your desired day of the week

(Ex. Every Monday) appear,

then press

[

– TIMER PROGRAMMING –

CH DATE BEGIN END

61 EVRY DAY -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

T0200UA(EN).QX3 06.1.25 6:26 PM Page 19

– TIMER PROGRAMMING –

CH DATE BEGIN END

61 7/03 MON 7:30

8:50

- - -/- - - - - -:- - -:- - - -

RECORDING

TV/VCR SECTION

TO CORRECT A PROGRAM AFTERWARD

1 Press [POWER] to turn on the unit.

2 Repeat steps 1 to 2 of "AUTOMATIC TIMER

RECORDING" on page 19.

3 Press [

] (or press [

] to go back one step)

until the part you want to correct begins flashing,

then use

[

] to make the changes.

Press

[ENTER] to confirm.

4 Press [POWER] to set automatic timer recording.

TO CANCEL A PROGRAM

1 Press [POWER] to turn on the unit.

2 If recording is in progress, press

[STOP/EJECT C A] on the unit.

3 Press [SET-UP].

Use

[

] to select "TIMER PROGRAMMING",

then press

[ENTER].

4 Use [

] to select a program you want to

cancel and press

[CLEAR].

5 Press [SET-UP] to exit the menu.

TIMER PROGRAM EXTENSION

You can shift the time schedule of an automatic timer

recording after programming or during recording.

1 Press [POWER] to turn on the unit.

2 Press [SET-UP].

Use

[

] to select "TIMER PROGRAMMING",

then press

[ENTER].

3 Press [REC] and use

[

] to select the desired

program.

4 Press [REC] repeatedly until your desired

begin/end time appears.

Each press will shift forward the begin/end time

for recording by 10 minutes.

NOTES:

• When the recording is already in progress, each press

will shift forward the end time only.

• If you want to cancel while setting, press

[PAUSE

]

on the remote control. The recording time returns to

the original time.

• When you shift forward the time schedule during

recording, the recording speed will be automatically

set to the SLP mode.

5 Press [ENTER] to complete the setting. Then

press

[SET-UP] to exit the menu.

ABOUT OVERLAP OF PROGRAMS

When programs overlap, a program may not be

recorded.

• The program with an earlier start has priority.

• Once the earliest program finishes, the overlapping pro-

grams will begin recording in sequence.

• When the starting time is the same, the program set on

the highest position in the program list has priority.

• The illustration below demonstrates the sequence of

recordings.

9:00AM 10:00AM 12:00PM

Program 1

10:00AM-11:00AM

Program 2

9:00AM-10:00AM

Program 3

9:30AM-12:00PM

11:00AM

Recording Sequence

*Recording period is SHADED

T0200UA(EN).QX3 06.1.25 6:26 PM Page 20

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

–

USER’S SET UP

–

RENTAL [OFF]

REPEAT PLAY [OFF]

B AUTO RETURN [ON]

AUTO RETURN

TV/VCRTV/VCR

This function allows you to automatically

search the beginning of the recorded

program(s) after timer recording finishes.

1 Press [SET-UP].

Use

[

] to point to

"USER’S SET UP",

then press

[ENTER].

2 Use [

] to point to

"AUTO RETURN", then press

[ENTER] to select "ON".

3 When all the timer recordings are completed, the

unit will rewind to the beginning of the recorded

program(s) and then turn itself off.

NOTE:

• If you turn off the unit while rewinding the tape, the

AUTO RETURN will stop.

TO CANCEL THE AUTO RETURN MODE

Repeat steps 1 to 2 and press [ENTER] to select

"OFF".

• Even if any power failure occurs, the unit will

retain its memory for this feature.

RECORDING

TV/VCR SECTION

AUX

COPYING A VIDEO CASSETTE

(from another source)

You can make copies of video tapes for

your enjoyment.

You CANNOT copy a DVD to a videotape.

Connect the unit and a source (for playing) device

as shown the following diagram.

WARNING: Unauthorized recordings of copyrighted

video tapes may be an infringement of copyright

laws.

1 Insert a pre-recorded video cassette into the

source device (VCR, camcorder, etc.).

2 Insert a video cassette to record into this unit’s

cassette compartment.

3 Press [SPEED] to select the

desired recording speed

(SP/SLP).

4 Press [SELECT] until "AUX"

appears on the screen.

5 Press [REC/OTR] on the unit.

6 Begin playback of the tape

in the source device.

NOTE:

•For best results during copying, use the front panel con-

trols whenever possible. The remote control might affect

the operation of the source device.

7 To stop copying, press [STOP/EJECT C A] on

the unit, then stop the playback on the source

device.

HEADPHONE

VIDEO

AUDIO

L R

VIDEO

OUT

AUDIO

OUT

[Ex: Jacks of

source device]

Audio/Video

cables

(not supplied)

[This unit]

TV/VCRTV/VCR

AUTO REWIND-EJECT

TV/VCRTV/VCR

• When the end of a tape is reached

during recording, playback, or fast-

forward, the tape will automatically rewind to the

beginning. After rewinding finishes, the unit will

eject the tape and turn itself off.

• This function is operative when REPEAT PLAY is

set to "OFF".

• The tape will not auto-rewind during timer record-

ing or One Touch Recording (OTR).

T0200UA(EN).QX3 06.1.25 6:26 PM Page 21

BOUT THE DISCS

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot

be played back.

*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc's producers.

*3: Discs recorded in the VR (Video Recording) format cannot be played back.

*4: Scratched or stained discs may not be played back.

*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the

recorder or special properties of discs.

*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may

not play them back. Even if they are played back, the sound or video quality will be compromised.

*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand's DVD

recorder. However, depending on the recording status of a disc, the disc may not be played back at all

or normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc

with the DVD recorder. Refer to the manual accompanying the DVD recorder.

*8: Only the discs recorded in the video format and finalized can be played back.

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not

be played back at all or normally (the picture or sound may not be smooth, etc.).

*9: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may

not play back properly.

*10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read

it correctly.

*11: The number inside the symbol refers to a region of the world and a disc encoded in a specific region

format can only be played back on unit with the same region code.

DVD-Video

* 1,2,4,6,

10,11

* 4,6,10

* 4,5,6,9,10

* 1,3,4,5,

6,7,9,10

DVD-RW

DVD-R

* 1,3,4,5,6,8,9,10

DVD+RW

DVD+R

Audio CD

CD-RW

CD-R

Digital

video

(MPEG2)

Digital

audio

Region

code

Mark (logo)

Playable

discs

Recorded

signals

Disc

size

Disc types

12 cm

8 cm

12 cm

8 cm

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1

Chapter 2

Chapter 3 Chapter 4

Example

Tr ack 1

Tr ack 2

Tr ack 5

Tr ack 6

Tr ack 3

Tr ack 4

• NEVER play back the following discs. Otherwise, malfunction may result!

DVD-RAM / CD-i / Photo CD / Video CD / DVD-Audio / DVD with region codes other than 1 or ALL /

DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3

• The sound MAY NOT be heard: Super Audio CD

NOTE:

Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density Super Audio

CD layer cannot be delivered.

• Any other discs without compatibility indications

is a trademark of DVD Format/Logo Licensing Corporation.

PLAYABLE DISCS

UNPLAYABLE DISCS

DVD SECTION

T0200UA(EN).QX3 06.1.25 6:26 PM Page 22

ABOUT THE DISCS / PLAYING A DISC

DVD SECTION

LAYING A DISC

1 Press [POWER] to turn on the

unit.

2 Press [OPEN/CLOSE

] on the unit.

3 Place the disc in the tray, with

the label facing up.

4 Press [PLAY

• The tray will close automatically and playback will

start. When you play back a DVD which features a

title menu, it may appear on the screen.

NOTES:

• Closing the disc tray manually or by pressing

[OPEN/CLOSE

] also starts playback.

• With DVDs that use titles for playback program signals,

playback may start from the second title or it may skip

these titles.

5 To freeze the picture, press [PAUSE

] during

playback.

NOTE:

• The sound will be muted in pause mode.

6 Press [STOP

] to stop

playback temporarily.

• Press [PLAY

] to resume

the playback.

• To cancel resume and stop the

disc,

[STOP

] again.

NOTES:

• The resume information stays on even if the unit is

turned off.

•A "prohibited icon" may appear

at the top-right on the TV screen

during operation. This means

that the operation is not available on the disc.

STEP BY STEP PLAYBACK

• During playback, press [PAUSE F].

You can advance the picture frame by

frame by pressing

[PAUSE F] repeatedly.

•To return to normal playback, press

[PLAY

BASIC PLAYBACK

DVD may contain menus to navigate the

disc and access special features.

1 Press [DISC MENU] or [TITLE].

• The DVD main menu / the title menu will appear.

• You can call up the menu even during playback.

2 Use [

] to select an item, and press

[ENTER].

NOTES:

• If disc menu is available on the disc, audio language,

subtitle options, chapters for the title and other

options will appear for selection.

• Contents of menu and corresponding menu opera-

tions may vary between discs. Refer to the manual

accompanying the disc for details.

DISC MENU / TITLE MENU

Press 'PLAY' to play from here.

To play the beginning,

press 'STOP' first and then 'PLAY'.

Resume ON

FAST FORWARD / FAST REVERSE

• During playback, press and hold

[FWD

] for fast forward or

[REV

] for fast reverse.

•Every time you press and hold

the button, playback speeds up

and the level of the speed

appears on the screen.

NOTES:

•For DVDs, fast forward/reverse speed is different

depending on the disc. Approximate speed is 1 (×2),

2 (×8), 3 (×20), 4 (×50) and 5 (×100).

•For Audio CDs approximate speed is 1 (

×2), 2 (×8)

and 3 (×30).

• When you use buttons on the front panel, use

[SEARCH

•To return to normal playback, press [PLAY

SLOW FORWARD / SLOW REVERSE

• During playback, press [PAUSE

• Press and hold

[FWD

] for slow for-

ward or

[REV

] for slow reverse.

•Every time you press and hold

the button, playback is slowed

down and the level of the speed

appears on the screen.

NOTES:

• Slow forward / reverse speed varies with the disc.

Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2).

• When you use buttons on the main unit, use

[SEARCH

•To return to normal playback, press [PLAY

T0200UA(EN).QX3 06.1.25 6:26 PM Page 23

(If available)

Press [MODE]

AUDIO MENU (p25)

V. S.S MENU (p26)

SEARCH MENU (p26)

REPEAT MENU (p27)

A-B REPEAT MENU (p27)

MENU OFF

AUDIO STREAM 1

...

AUDIO STREAM 8

ANGLE 1

....

ANGLE 8

OFF

SUBTITLE STREAM 1

....

SUBTITLE STREAM 32

OFF

CHAPTER SEARCH

TITLE SEARCH

TIME SEARCH

MARKER SEARCH

OFF

CHAPTER

TITLE

OFF

A-

A-B

OFF

ZOOM 1 (×1.3)

ZOOM 2 (×2.0)

ZOOM 3 (×4.0)

STEREO

L-ch

R-ch

OFF

TRACK SEARCH

TIME SEARCH

MARKER SEARCH

OFF

TRACK

ALL

OFF

A-

A-B

DVD-V

Press [MODE]

AUDIO MENU (p25)

SUBTITLE MENU (p25)

ANGLE MENU (p25)

ZOOM MENU (p25)

BLACK LEVEL MENU (p26)

V. S.S MENU (p26)

SEARCH MENU (p26)

REPEAT MENU (p27)

A-B REPEAT MENU (p27)

MENU OFF

PECIAL PLAYBACK FUNCTIONS & SETTINGS

DVD SECTION

FUNCTION TABLE

Setting menu switches as below every time you press [MODE] during playback.

See the reference page for how to set each menu. Some functions are not available in specific

modes, but this is not a malfunction.

T0200UA(EN).QX3 06.1.25 6:26 PM Page 24

The Zoom function allows you to enlarge

the video image and to pan through the

enlarged image.

1 During playback, press

[MODE] repeatedly until

ZOOM menu appears.

2 Press [ENTER] repeatedly to select the required

zoom factor.

OFF ZOOM1(×1.3) ZOOM2(×2.0) ZOOM3(×4.0)

3 Use [

] to move the zoomed picture

across the screen.

4 Press [RETURN] to exit.

• The zoomed position guide

appears on the right corner

of the TV screen in the zoom mode.

NOTES:

• Zooming function does not work while disc menu is shown.

• Zooming function is not available on some discs.

•It may take several seconds to slide the zoomed picture.

• The picture may be distorted if you operate other

functions (ex. pause, fast forward etc.) repeatedly in

the zoom mode.

•To cancel the zoom mode, repeat steps 1-2 and

press

[ENTER] until "OFF" appears.

OFF (ZOOM)

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

DVD SECTION

ZOOM

AUDIO LANGUAGE

You can select audio language during DVD playback

(if multi languages are available).

1 Press [MODE] during playback.

2 Use [

] to select your desired language.

NOTES:

• This function may not work on some DVDs with mul-

tiple audio languages. In this case, set it on the disc

menu. (Operation varies depending on discs. Refer to

the manual of the disc.)

• When "NOT AVAILABLE" appears

on the TV screen, it means this

function is not available on the

disc.

3 Press [RETURN] to exit the menu.

STEREO SOUND MODE

You can select sound output mode.

1 Press [MODE] during

playback.

2 Use [

] to select the sound mode.

• STEREO: stereo sound with left and right channels

L-ch: left channel sound only

R-ch: right channel sound only

3 Press [RETURN] to exit the menu.

AUDIO MENU

1.ENG Dolby D 3/2.1ch 48k/3

STEREO (AUDIO)

You can select a language for subtitles

during DVD playback (if available).

1 During playback, press

[MODE] repeatedly until

SUBTITLE menu appears.

2 Use [

] to select your desired subtitle lan-

guage. To cancel subtitles, select "OFF".

3 Press [RETURN] to exit the menu.

NOTES:

• This function may not work on some DVDs with mul-

tiple subtitle languages. In this case, set it on the disc

menu. (Operation varies depending on discs. Refer to

the manual of the disc.)

• If the selected language does not have 3-letter code,

"---" will be displayed on the screen. (Refer to

LANGUAGE CODE LIST on page 35.)

SUBTITLE LANGUAGE

1.ENG/6

(SUBTITLE)

NOT AVAILABLE

(

AUDIO

)

Some DVD discs contain scenes which

have been shot from various angles and

you can change them as you like.

1 During playback, press

[MODE] repeatedly until

ANGLE menu appears.

2 Use [

] to select your desired angle.

3 Press [RETURN] to exit the menu.

NOTE:

• If multiple angle function is not available, this menu

does not appear on the screen.

1 / 8 (ANGLE)

ANGLE MENU

ZOOM2OFF (ZOOM) ZOOM1 ZOOM3

T0200UA(EN).QX3 06.1.25 6:26 PM Page 25

You can adjust the Black Level to make the

black parts of the picture brighter.

1 During playback, press

[MODE] repeatedly until

BLACK LEVEL menu

appears.

2 Use [

] to select "ON" or "OFF".

• ON: Makes the dark parts brighter.

OFF: Shows the original picture as recorded.

(Initial setting)

3 Press [RETURN] to exit the menu.

NOTE:

• The setting will be saved even if the unit is turned off.

OFF (BLACK LEVEL)

BLACK LEVEL MENU

You can enjoy surround-sound effect

over two speakers on this unit.

1 During playback, press

[MODE] repeatedly until

V.S.S menu appears.

2 Use [

] to select the desired sound effect.

• 1: Natural effect

2: Emphasized effect

OFF: No effect (Initial setting)

3 Press [RETURN] to exit the menu.

NOTES:

• When playing back 96kHz with Virtual Surround func-

tion, the sound will be down sampled at 48kHz and

output as digital audio.

(for CD play only)

• Virtual Surround System will be effective only when

you set the sound mode to "STEREO". (Refer to

"STEREO SOUND MODE" on page 25.)

OFF (V.S.S.)

V.S.S (Virtual Surround System)

DVD SECTION

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

You can begin playback at a specific track, title,

chapter or from a specific point on a disc.

TRACK SEARCH

1 During playback, press [MODE]

repeatedly until SEARCH

menu appears.

2 Within 60 seconds, use the Number buttons to

select the desired track number. Playback will

start from the selected track.

NOTES:

•For single digit press [0] first, if the total track of the

disc is 10 tracks or more.

• During playback or pause, you can also select tracks

by skipping with

[H / G ] (or [SKIP H / G ] on

the front panel), or entering the desired track number

with the Number Buttons.

3 Press [RETURN] to exit the menu.

CHAPTER SEARCH

1 During playback, press

[MODE] repeatedly until

SEARCH menu appears.

2 Use the Number buttons to enter the desired

chapter number. Playback will start at the selected

chapter.

• Press

[CLEAR] to erase the incorrect input.

• For single digit press

[0] first, if the total number of

chapters of the disc is 10 or more.

3 Press [RETURN] to exit the menu.

TITLE SEARCH

1 During playback, press [MODE] repeatedly until

SEARCH menu appears.

2 Use [

] to display

TITLE SEARCH menu.

3 Use the Number buttons to enter the desired title

number. Playback will start at the selected title.

• Press

[CLEAR] to erase the incorrect input.

• For single digit press

[0] first, if the total number of

titles of the disc is 10 or more.

4 Press [RETURN] to exit the menu.

SEARCH MENU

_/2 (SEARCH)

__/12 (SEARCH)

_ _/21 (SEARCH)

T0200UA(EN).QX3 06.1.25 6:26 PM Page 26

TIME SEARCH

1 During playback, press [MODE] repeatedly until

SEARCH menu appears.

2 Use [

] repeatedly to

display TIME SEARCH menu.

3 Within 60 seconds, use the Number buttons to

enter a desired disc time. Playback will start at

the specified time.

• Press

[CLEAR] to erase the incorrect input.

• When there is no need to enter a number, "0"

appears automatically.

4 Press [RETURN] to exit.

MARKER SEARCH

You can set markers to memorize your favorite

places on a disc.

1 During playback, press [MODE] repeatedly until

SEARCH menu appears.

2 Use [

] repeatedly to

display MARKER SEARCH

menu.

3 Use [

] to select a marker number among

1 to 10.

4 When the track (or title) reaches your desired

point, press

[ENTER] to set a marker.

• The track (or title) number and

elapsed playing time will appear

on the TV screen.

5 You can play from the desired point by selecting

the marker number by using

[

] and then

pressing

[ENTER].

6 To clear a marker, select the marker number and

press

[CLEAR].To clear all markers at once,

select "AC" with

[

] and press [ENTER].

NOTE:

• The following operation will also erase all markers:

– Opening the disc tray

– Turning off the power

– Pressing

[SELECT]

7 Press [RETURN] to exit the menu.

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

DVD SECTION

0:0 _:_ _ 0:04:23

TOTAL

REPEAT PLAYBACK

REPEAT TRACK

1 During playback, press

[MODE] repeatedly until

REPEAT menu appears.

2 Use [

] to select your desired repeat mode.

• OFF: Repeat function off

TRACK: Current track repeat

ALL: All track repeat

NOTE:

• Repeat Track setting will be cleared when moving to

other track.

3 Press [RETURN] to exit the menu.

REPEAT TITLE / CHAPTER

1 During playback, press

[MODE] repeatedly until

REPEAT menu appears.

2 Use [

] to select your desired repeat mode.

• OFF: Repeat function off

CHAPTER: Current chapter repeat

TITLE: Current title repeat

NOTES:

• Repeat Title/Chapter is not available in some scenes.

• The REPEAT setting will be cleared when moving to

other title or chapter.

3 Press [RETURN] to exit the menu.

REPEAT A-B

1 Press [MODE] repeatedly until

A-B REPEAT menu appears.

2 Press [ENTER] at your desired

starting point (A).

To cancel it, press

[CLEAR].

3 Press [ENTER] again at your

desired ending point (B).

The repeat sequence begins.

4 To exit the sequence, follow step1 and press

[ENTER] repeatedly until "OFF" appears and

press

[RETURN] to exit the menu.

NOTES:

• The A-B repeat section can be set only within the cur-

rent title (for DVDs) or current track (for Audio CDs).

• A-B repeat is not available with some scenes in DVD.

• A-B repeat playback is not available during other

repeat playback.

_ _ _ _:_ _:_ _

1 23456789

1 00:15:30

23456789

OFF (REPEAT)

A-B (A-B REPEAT)

A- (A-B REPEAT)

OFF (REPEAT)

OFF (A-B REPEAT)

<Example: CD>

T0200UA(EN).QX3 06.1.25 6:26 PM Page 27

You can determine the playing order of tracks.

1 In the stop mode, press [MODE].

• The PROGRAM screen appears.

2 Use [

] to select a track,

then press

[ENTER].

NOTES:

• Up to 99 tracks can be entered.

• Press

[CLEAR] to erase the

most recently entered track.

• If you enter more than 8 tracks, you can change pages

of the program list with

[H / G ].

•To erase all tracks in the program at once, select "ALL

CLEAR" at the bottom of the track list.

3 Repeat step 2 until you select all the tracks you

want to play in the program.

4 Press [PLAY

] to play the programmed tracks.

This function shuffles the playing order of

tracks.

1 In the stop mode, press

[MODE] twice.

• The RANDOM screen appears.

2 Press [PLAY

] to start random playback.

NOTE:

• REPEAT setting is available during random playback.

(Refer to "REPEAT TRACK" on page 27.)

3 Press [STOP

] to stop random playback.

PLAY

CD-DA TOTAL 0:45:55

RANDOM PROGRAM

- - no indication - -

RANDOM

PROGRAMMED PLAYBACK

RANDOM PLAYBACK

You can check the information about the current disc by pressing [DISPLAY].

For DVD-Videos

1 Press [DISPLAY] during playback to show cur-

rent Chapter.

• The elapsed and remaining

playing time of the current

chapter will be displayed.

2 Press [DISPLAY] again to show current Title.

• The elapsed and remaining

playing time of the current title

will be displayed.

Press [DISPLAY] again.

• The bit rate and the current

repeat setting will be displayed.

• If you are playing a dual layered disc, the layer

number will also be displayed.

(L0: Layer 0 is playing. L1: Layer 1 is playing).

Press [DISPLAY] again to exit.

9/49 0:00:00 -0:03:30

1/3 0:00:00 - 1:23:45

TL1

For Audio CDs

1 Press [DISPLAY] during playback to show the

current Track.

• The elapsed and remaining

playing time of the current

track will be displayed.

2 Press [DISPLAY] again to show current Total

Tra ck.

• The elapsed and remaining

playing time of the total track

will be displayed.

3 Press [DISPLAY] again to exit.

4/12 0:03:21 - 0:02:15

4/12 0:13:45 - 0:45:40

PROGRAM B

When in the PROGRAM

mode or RANDOM

mode.

PROGRAM

TOTAL 0:14:25

1/1

1/4

6 1:30

CD-DA

ENTER

CLEAR

PLAY

2 4:30

1 3:40 1 3:40

3 5:00

4 3:10

5 5:10

6 1:30

3 5:00

10 1:30

12 2:45

6 1:30

7 2:30

PROGRAM

TOTAL 0:00:00

1/1

1/4

1 3:40

CD-DA

ENTER

CLEAR

PLAY

2 4:30

1 3:40

3 5:00

4 3:10

5 5:10

6 1:30

7 2:30

DVD SECTION

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

5 Press [STOP

] to temporarily stop the playback.

You can resume the playback by pressing

[PLAY

Press

[STOP

] twice to cancel the pro-

grammed playback.

NOTE:

• REPEAT setting is available during programmed

playback. (Refer to "REPEAT TRACK" on page 27.)

N-SCREEN INFORMATION

T0200UA(EN).QX3 06.1.25 6:26 PM Page 28

HANGING THE DVD SET UP ITEMS

ON-SCREEN INFORMATION / CHANGING THE DVD SET UP ITEMS

DVD SECTION

1 In the stop mode, press

[SET-UP] twice to display the

DVD SETUP menu.

NOTES:

• Pressing [SET-UP] once will

show TV/VCR SETUP menu partly.

• If the menu does not appear, press [STOP

] first.

Make sure the unit is in DVD mode before setting.

2 Use [

] to select "CUSTOM", then press

[ENTER].

3 Use [

] to select the

desired item, then press

[ENTER].

Refer to the pages below for

continuation to set up each item.

• LANGUAGE setting: P29

• DISPLAY setting: P30

• AUDIO setting: P30

• PARENTAL setting: P30

• OTHERS setting: P31

SETUP CUSTOM

LANGUAGE

DISPLAY

AUDIO

PARENTAL

OTHERS

CUSTOM MENU

You can change the DVD player’s settings by pressing [SET-UP] in DVD mode.

The set up items are shown in the diagram below.

AUDIO

SUBTITLE

DISC MENU

DRC

DOWN SAMPLING

DOLBY DIGITAL

TV MODE

STILL MODE

TV MODE

DOLBY DIGITAL

ANGLE ICON

AUTO POWER OFF

PARENTAL LEVEL

PASSWORD CHANGE

LANGUAGE (p29)

DISPLAY (p30)

AUDIO (p30)

PARENTAL (p30)

OTHERS (p31)

CUSTOMQUICK INITIALIZE

Press [SET-UP] twice

LANGUAGE SETTING

4 Use [

] to select the

desired item, then press

[ENTER].

• AUDIO: Sets the audio language.

• SUBTITLE: Sets the subtitle language.

• DISC MENU: Sets the language for DVD menu.

5 Use [

] to select your desired language

from the list, then press

[ENTER].

6 Press [SET-UP] to exit the menu.

NOTES:

• If your desired language is not

on the list, select "OTHER" and

enter the code of the language.

(Refer to "LANGUAGE CODE

LIST" on page 35.)

• This feature may not be valid due to default setting

of the disc. In this case, press

[MODE] to select the

language. (Refer to "AUDIO MENU" on page 25.)

• If you select a language that is not supported by the

disc, subtitle will be "OFF" automatically and the

default language of the disc will be selected.

•To change the language for the on-screen menus,

call up the TV/VCR SETUP menu by pressing

[SET-UP] once and set the language. (Refer to "ON-

SCREEN MENU LANGUAGE" on page 11.)

SETUP

QUICK

CUSTOM

INITIALIZE

SELECT:

L SET:ENTER

EXIT:SETUP CANCEL:RETURN

AUDIO ORIGINAL

SUBTITLE

OFF

DISC MENU

ENGLISH

SETUP LANGUAGE

LANGUAGE CODE

Please enter a 4-digit language code.

T0200UA(EN).QX3 06.1.25 6:26 PM Page 29

DISPLAY SETTING

4 Use [

] to select an item,

then press

[ENTER].

• TV MODE:

You can change certain aspects of the DVD display

screens and on-screen messages on the TV screen.

• 4:3 LETTER BOX (default):

To show black bars on top and

bottom of the screen.

• 4:3 PAN & SCAN:

To show a full height picture with both sides

trimmed.

NOTE:

•You can access this setting directly by selecting

"QUICK" at step 2 on page 29.

• STILL MODE:

This function allows you to adjust picture resolution

and quality in the still mode.

•AUTO (default):

Automatically select the best

resolution setting (FRAME or FIELD) based on

the data characteristics of the pictures.

• FIELD:

Select "FIELD" when the pictures are still unstable

even if "AUTO" is selected. FIELD stabilizes the

pictures, although the picture quality may become

coarse due to the limited amount of data.

• FRAME:

Select "FRAME" to display relatively motionless

pictures in higher resolution. FRAME improves

the picture quality, although it may unstabilize the

pictures due to simultaneous output of two field

data.

5 Press [SET-UP] to exit the menu.

QUICK

TV MODE

4:3 LETTER BOX

STILL MODE AUTO

SETUP DISPLAY

AUDIO SETTING

Choose the appropriate Audio settings for your

equipment as it only affects during the playback of

DVD discs.

4 Use [

] to select an item,

then press

[ENTER] repeated-

ly until your desired setting

appears.

• DRC (Dynamic Range Control):

• ON :To compress the range of soft to loud sound.

(default)

• OFF : Output the original sound.

• DOWN SAMPLING:

• ON : Output in 48kHz. (default)

• OFF : Output the original sound.

NOTE:

• When playing a disc with copyright protection, the

sound will be output at 48kHz even if the setting is

"OFF".

• DOLBY DIGITAL:

• BITSTREAM: Output a Dolby Digital signal.

(default)

• PCM: Convert the Dolby Digital to PCM.

(2 channel stereo)

NOTE:

•You can access this setting directly by selecting

"QUICK" at step 2 on page 29.

• Set to "BITSTREAM" when the unit is connected to

a Dolby Digital Decoder.

5 Press [SET-UP] to exit the menu.

QUICK

DRC

DOWN SAMPLING

DOLBY DIGITAL

SETUP AUDIO

BITSTREAM

DVD SECTION

PARENTAL SETTING

This feature allows you to set the rating level of your

DVD discs. Playback will stop if the disc ratings

exceed the level you set.

PARENTAL LEVEL

4 Enter four-digit password with

the Number buttons, then

press

[ENTER].

NOTE:

• Enter any 4 digits (except for 4737) to set the pass-

word for the first time, and record it for your memory.

5 Use [

] to select

"PARENTAL LEVEL", then

press

[ENTER].

SETUP PARENTAL

PASSWORD

Please enter a 4-digit password.

PARENTAL LEVEL ALL

PASSWORD CHANGE

SETUP PARENTAL

CHANGING THE DVD SET UP ITEMS

4:3 LETTER BOX

4:3 PAN & SCAN

SETUP DISPLAY

TV MODE

AUTO

FIELD

FRAME

SETUP DISPLAY

STILL MODE

T0200UA(EN).QX3 06.1.25 6:26 PM Page 30

OTHERS SETTING

4 Use [

] to select an item,

then press

[ENTER] repeated-

ly to set the feature "ON" or

"OFF".

• ANGLE ICON:

• ON: To show the angle icon when multiple

camera angles are available during DVD

playback. (default)

• OFF: To keep angle icon from the display.

• AUTO POWER OFF:

• ON: To activate screen saver program and turn

off the unit automatically. (default)

• OFF: To deactivate Auto Power Off function.

NOTE:

• The screen saver program starts when there is no

input from the unit for 5 minutes in the stop mode.

After the screen saver program is activated for 15

minutes, the power is automatically turned off.

5 Press [SET-UP] to exit the menu.

6 Use [

] to select the

desired level, then press

[ENTER].

7 Press [SET-UP] to exit the menu.

CONTROL LEVELS

• ALL: All parental locks are cancelled.

•

8 [ADULT]: DVD software of any grade

(adult/general/children) can be played back.

• 7 to 2: Only DVD software intended for general

use and children can be played back.

•

1 [KID SAFE]: Only DVD software intended for

children can be played back, with those intended

for adult and general use prohibited.

NOTE:

• With some DVDs, it may be difficult to find if they are

compatible with parental lock. Be sure to check if the

parental lock function operates in the way that you

have set.

PASSWORD CHANGE

4 Enter current password with

the Number buttons, then

press

[ENTER].

5 Use [

] to select

"PASSWORD CHANGE", then

press

[ENTER].

6 Enter four-digit password with

the Number buttons, then

press

[ENTER].

7 Press [SET-UP] to exit the menu.

NOTE:

• If you forget the current password, enter 4737 first,

then enter your new password.

The former password will be cleared and parental

level will be set to "ALL" (default).

CHANGING THE DVD SET UP ITEMS

DVD SECTION

This allows you to return all items of

SETUP menu (except for

PARENTAL

setting

and menu language) to their default settings.

1 In the stop mode, press [SET-UP] twice to

display the DVD SETUP menu.

2 Use [

] to select

"INITIALIZE", then press

[ENTER].

3 Use [

] to select "YES",

then press

[ENTER] twice.

• To cancel the initialization,

select "NO".

4 Press [SET-UP] to exit the menu.

PARENTAL LEVEL

ALL

8 [ADULT]

7 [NC-17]

6 [R]

SETUP PARENTAL

SETUP OTHERS

ANGLE ICON

AUTO POWER OFF

SETUP

QUICK

CUSTOM

INITIALIZE

SETUP INITIALIZE

Initialize?

YES

INITIALIZE

SETUP PARENTAL

PASSWORD

Enter current password.

PARENTAL LEVEL ALL

PASSWORD CHANGE

SETUP PARENTAL

PASSWORD

Please enter a 4-digit password.

Don't forget the password.

Press 'ENTER' to activate password.

2 3 4

T0200UA(EN).QX3 06.1.25 6:26 PM Page 31

ROUBLESHOOTING GUIDE

If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following

guide for the possible remedy of a problem before contacting the Customer Service. Sometimes a perfor-

mance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. It

could save your time and money.

No power

No operation by remote control

Poor or no picture

Poor or no picture in playback

Poor or no sound

Cannot go into recording mode

Timer recording does not work

or results in failure

Picture or color fades in and out

when copying a videotape

SYMPTOM POSSIBLE REMEDY

PAGE

•

Make sure the power plug is connected to an AC outlet.

•

(In case of power failure) Check the breaker.

•

Check if the batteries are weak or inserted incorrectly.

Replace weak batteries and insert with their polarities (+/-

signs) as indicated.

•

Aim the remote control at the remote sensor and operate

within 23 feet (7m) of the unit.

•

Remove all obstacles to clear the path of the infrared signal.

•

Check the infrared signal output.

•

Select the correct mode to operate by pressing [

SELECT].

•

The operable range from the unit is 10 feet (3m) within 15˚.

•

Check if antenna or cable is connected properly.

•

Check for the broken pin or wire of antenna cable.

•

Check for source of reception disturbance.

•

Press

[SELECT] to select the correct mode.

•

Perform channel scanning to memorize available TV channels.

•

Tr y another channel. If OK, then possible station problem.

•

Adjust picture control (COLOR/CONTRAST/BRIGHT etc.).

•

Check for magnetism from nearby appliances and try

degaussing.

•

Adjust tracking control.

•

Tr y video head cleaning.

•

The videotape may be old or worn. Replace with new one.

•

Adjust volume control using

[VOL.

•

Tr y another channel. If OK, then possible station problem.

•

Check if the unit is in Still mode or Slow motion playback.

If so, press

[PLAY B] to return to normal playback.

•

Make sure the cassette has an erase-prevention tab. If neces-

sary, cover the hole with plastic tape.

•

Make sure the begin/end time is set correctly.

•

Make sure the power is off to activate timer recording.

•

Check if the unit’s clock is set to current time and date.

•

The program may contain copy protection signals that restricts

copying.

•

The timer setting overlapped with another setting has priority.

•

Check if the tape reached the end during recording.

•

Check if the power failure during recording.

•

You cannot copy a copyrighted videotape. You are experienc-

ing copy guard protection.

TV/VCR mode

General

T0200UA(EN).QX3 06.1.25 6:26 PM Page 32

TROUBLESHOOTING GUIDE

Misspelling in captions

Text is not shown in its entirety

or a delay occurs from what is

being said

Captions scrambled with white

boxes

No captions in a program which

must contain closed caption

No captions in a pre-recorded

videotape with indicated closed

captions included

Black box in the TV screen

No picture

Disc cannot be played

No sound

No DTS audio is output

Distorted picture

Audio or subtitle language does

not match the setting

The camera angle cannot be

changed

Audio or subtitle language can-

not be changed

"Prohibited icon" appears on the

screen

CD/DVD sound dropout

No CD/DVD reproduction

DVD picture poor

SYMPTOM POSSIBLE REMEDY

PAGE

•

Error committed by the closed captioning production company.

•

Possible in a live broadcast. Not in case of a prerecorded pro-

gram.

•

A few seconds of delay is common for live broadcast.

If a dialogue exceeds the display capacity (220 words per

minute), selective editing is used so that the captions remain

up-to-date with the current TV screen dialogue.

•

Caused by interferences of building, power lines, thunder-

storms, etc.

•

The broadcast may use a time compression process to speed

up the program. The decoder cannot read the compressed

information and captions will be lost.

•

Possibility of a illegal copy or an erroneous copying process

accidentally performed by the fabricator.

•

You are in TEXT mode. Select CAPTION mode or "OFF".

•

This unit cannot play DVD-RAM/CD-i/Photo CD/Video

CD/DVD with region codes other than "1" and "ALL".

•

Clean the disc.

•

Place the disc correctly, with the label side up.

•

Cancel the parental setting or change the control level.

•

Correct the audio output settings.

•

Confirm the power and audio settings of external audio com-

ponent.

•

This unit does not support DTS audio. This is not a malfunc-

tion.

•

During the playback of a 2-layered disc, pictures may stop for

a moment. This happens while the 1st layer is being switched

to the 2nd layer. This is not a malfunction.

•

This happens right after fast forwarding or rewinding.

•

The selected language is not available for audio or subtitle on

the DVD.

•

The DVD does not contain sequences recorded from different

camera angles.

•

The DVD does not contain audio source or subtitles in the

selected language.

•

That operation is not available by the unit or the disc.

•

Scratched disc. Replace with an unscratched one.

TV/VCR mode DVD mode

NOTES:

• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s

Manual for details on correct operations.

• Playback from a desired track and random playback are not available during playback.

T0200UA(EN).QX3 06.1.25 6:26 PM Page 33

DISC HANDLING

• Handle the discs so that fingerprints and dust do

not adhere to the surfaces of the discs.

• Always store the disc in its protective case when it

is not used.

•To clean-off, use a soft cloth.

• Do not use a hard cloth since this

will mar the disc.

• Wipe the disc in a straight line from center to edge.

•Never wipe with a circular motion.

• Do not use detergent or abrasive clean-

ing agents.

AINTENANCE

DEGAUSSING

A degaussing circuit in this unit clears up color

errors on the TV screen. Color errors occur when

there is any excess magnetism close to the unit.

This circuit is designed to operate once when the

unit is first plugged in.

If you see minor color

errors on the screen, unplug the unit for approx-

imately 30 minutes.

When you plug the unit again,

the degaussing circuit will operate to clear errors.

Take this step any time the TV screen is accidental-

ly magnetized or when you move the unit.

AUTO HEAD CLEANING

•Automatically cleans video heads as you insert or

remove a cassette, so you can see a clearer pic-

ture.

• Playback picture may become blurred or interrupt-

ed while the TV program reception is clear. Dirt

accumulated on the video heads after long peri-

ods of use or the usage of rental or worn tapes

can cause this problem.

If a streaky or snowy picture appears during play-

back, the video heads in your unit may need to be

cleaned.

1. Please visit your local Audio/Video store and pur-

chase a good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the prob-

lem, please call our help line mentioned on the

front page, to locate an Authorized Service

Center.

NOTES:

• Remember to read the instructions included with the

video head cleaner before use.

• Clean video heads only when problems occur.

IF THE LASER OPTICAL PICKUP UNIT IS

DIRTY

• If the unit still does not perform properly when it is

operated, while referring to the relevant sections

and to “TROUBLESHOOTING GUIDE” in this

Owner’s Manual, the laser optical pickup unit may

be dirty. Consult your dealer or an Authorized

Service Center for inspection and cleaning of the

laser optical pickup unit.

CABINET CLEANING

• Wipe the front panel and other exterior surfaces of

the unit with a soft cloth immersed in lukewarm

water and wrung dry.

•Never use a solvent or alcohol. Do not spray

insecticide liquid near the unit. Such chemicals

may cause damage and discoloration to the

exposed surfaces.

SERVICING

• Should your unit become inoperative, do not try to

correct the problem by yourself. There are no

user-serviceable parts inside. Turn off, unplug the

power cord and

please call our help line men-

tioned on the front page,

to locate an Authorized

Service Center.

IR SIGNAL CHECK

Use the AM radio or the digital camera to check if

the remote control properly sends out the infrared

signal. It will help to define the cause of malfunction.

Using AM radio

•Tune the AM radio to no broadcasting band.

Press any button on remote control toward

the radio. If the radio receives the signal from

remote control properly, the sound will flutter.

Using digital camera

(including built-in camera of cellu-

lar phone)

• Press and hold any button on remote control

toward a digital camera. The remote control is

working if you confirm infrared light through the

digital camera.

T0200UA(EN).QX3 06.1.25 6:26 PM Page 34

LANGUAGE CODE LIST

Language Code

Mongolian 5960

Nauru 6047

Nepali 6051

Norwegian [NOR] 6061

O-R

Occitan 6149

Oriya 6164

Oromo(Afan) 6159

Panjabi 6247

Pashto;Pushto 6265

Persian 5247

Polish [POL] 6258

Portuguese [POR] 6266

Quechua 6367

Rhaeto-Romance 6459

Romanian [RUM] 6461

Russian [RUS] 6467

Samoan 6559

Sangho 6553

Sanskrit 6547

Scots Gaelic 5350

Serbian 6564

Serbo-Croatian 6554

Sesotho 6566

Setswana 6660

Shona 6560

Sindhi 6550

Singhalese 6555

Siswat 6565

Slovak 6557

Slovenian 6558

Language Code

Somali 6561

Spanish [SPA] 5165

Sundanese 6567

Swahili 6569

Swedish [SWE] 6568

Tagalog 6658

Tajik 6653

Tamil 6647

Tatar 6666

Telugu 6651

Thai 6654

Tibetan 4861

Tigrinya 6655

Tonga 6661

Tsonga 6665

Tu rkish [TUR] 6664

Tu rkmen 6657

Tw i 6669

U-Z

Ukrainian 6757

Urdu 6764

Uzbek 6772

Vietnamese 6855

Volapuk 6861

Welsh 4971

Wolof 6961

Xhosa 7054

Yiddish 5655

Yo r uba 7161

Zulu 7267

MAINTENANCE / APPENDIX

If you choose a language that has a 3 letter language

code, the code will be displayed every time you change

the AUDIO or SUBTITLE language setting. If you

choose any other languages, '---' will be displayed

instead. (3 letter language code is written in bracket.)

Language Code

A-B

Abkhazian 4748

Afar 4747

Afrikaans 4752

Albanian 6563

Amharic 4759

Arabic 4764

Armenian 5471

Assamese 4765

Aymara 4771

Azerbaijani 4772

Bashkir 4847

Basque 5167

Bengali;Bangla 4860

Bhutani 5072

Bihari 4854

Bislama 4855

Breton 4864

Bulgarian 4853

Burmese 5971

Byelorussian 4851

C-E

Cambodian 5759

Catalan 4947

Chinese [CHI] 7254

Corsican 4961

Croatian 5464

Czech [CZE] 4965

Danish [DAN] 5047

Dutch [DUT] 6058

English [ENG] 5160

Esperanto 5161

Estonian 5166

F-H

Faroese 5261

Fiji 5256

Finnish [FIN] 5255

French [FRE] 5264

Frisian 5271

Galician 5358

Georgian 5747

Language Code

German [GER] 5051

Greek [GRE] 5158

Greenlandic 5758

Guarani 5360

Gujarati 5367

Hausa 5447

Hebrew 5569

Hindi 5455

Hungarian [HUN] 5467

I-K

Icelandic [ICE] 5565

Indonesian 5560

Interlingua 5547

Interlingue 5551

Inupiak 5557

Irish [IRI] 5347

Italian [ITA] 5566

Japanese [JPN] 5647

Javanese 5669

Kannada 5760

Kashmiri 5765

Kazakh 5757

Kinyarwanda 6469

Kirghiz 5771

Kirundi 6460

Korean [KOR] 5761

Kurdish 5767

L-N

Laothian 5861

Latin 5847

Latvian;Lettish 5868

Lingala 5860

Lithuanian 5866

Macedonian 5957

Malagasy 5953

Malay 5965

Malayalam 5958

Maltese 5966

Maori 5955

Marathi 5964

Moldavian 5961

PPENDIX

CABLE CHANNEL DESIGNATIONS

TV Display

CATV channel

TV Display

W+80 W+81 W+82 W+83 W+84

W+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79

W+55 W+56 W+57 W+58 A-4 A-3 A-2 A-1 W+59 W+60 W+61 W+62 W+63 W+64

W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54

W+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39

W+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24

A-5

RSTUVWW+1 W+2 W+3 W+4 W+5 W+6 W+7 W+8 W+9

CDE FGH I JK LMNOPQ

5A 2 3 4 5 6 7 8 9 10 11 12 13 A B

123456789101112131415

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

91 92 93 94 95 96 97 98 99 100 101 102 103 104 105

106 107 108 109 110 111 112 113 114 115 116 117 118 119 120

121 122 123 124 125

CATV channel

If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels

with letters or letter-number combinations. Please check with your local cable company. The following is a

chart of common cable channel designations.

T0200UA(EN).QX3 06.1.25 6:26 PM Page 35

GENERAL SPECIFICATIONS

TV/VCR

ELECTRICAL SPECIFICATIONS

CRT: 19 inch in-line gun,

90˚ deflection tube

Television system: NTSC-M

Closed caption system: §15.119/FCC

Video Heads: Rotary four-head

Tape width: 1/2 inch

Tape speed

SP: 33.40 mm/sec.

LP: 16.67 mm/sec.

SLP: 11.12 mm/sec.

Tuner channel

TV VHF Low: #2~#6

TV VHF High: #7~#13

TV UHF: #14~#69

CATV

VHF: 5A

MID band: A5~A1, A~I

SUPER band: J~W

HYPER band: W+1~W+84

DVD

Product type: DVD Player

Discs:

DVD video, Audio CD

Output signal format: NTSC color

Sound output:

2 speakers, 1W, 8 ohm

OTHER SPECIFICATIONS

Ter minals

Antenna input: VHF/UHF/CATV

75 ohm unbalanced

(F-type)

Video input: RCA connector

× 1

Audio L/R input: RCA connector

× 2

Headphone: 1/8" stereo (3.5 mm)

Coaxial digital

audio output: One pin jack,

500 m Vpp (75 ohm)

Remote control: Digital encoded

infrared light system

Operating temperature: 5°C to 40°C

(41°F~104°F)

Power requirements: AC 120 V, 60 Hz

Power consumption 90 W

(Maximum):

Picture tube: 19"

Dimensions: H: 19-11/16" (500 mm)

: 21-7/8" (556 mm)

D: 18-3/4" (477 mm)

Weight: 43.2 lbs. (19.6 kg)

•Designs and specifications are subject to change without notice.

• If there is a discrepancy between languages, the default language will be English.

PECIFICATIONS

T0200UA(EN).QX3 06.1.25 6:26 PM Page 36

CONEXIONES DE ANTENA/CABLE

ÍNDICE DE CONTENIDO / PREPARATIVOS PARA EL USO

ANT.

OUT

AUDIO OUT

COAXIAL

ANT.

Parte trasera de la

unidad

*NOTA

(NO DESCONECTAR DE LA CAJA)

Algunos sistemas de TV por cable utilizan

señales cifradas y requieren un convertidor

especial para recibir estos canales.

Consulte con su empresa de cable local.

Cable entrante desde antena

casera/empresa de cable (sin

caja de cable)

Cable entrante desde empresa de cable

o antena de satélite

Caja de cable o caja de satélite*

Enchufe el cable entrante en la toma ANT., en la parte trasera de la unidad.

Si su servicio de cable le suministra una caja convertidora o si usted utiliza un sistema de satélite, conecte

la caja con esta unidad, como se indica a continuación.

NOTA:

Antes de enchufar la antena en la

toma ANT. de la unidad, compruebe

que la patilla no está doblada. Si

está doblada, enderece la patilla

como se indica en la ilustración y

enchufe la patilla a la toma ANT. de

la unidad.

(Debe ser

enderezada)

(Patilla recta)

Patilla doblada

Cable

Enchufe

NDICE DE CONTENIDO

PREPARATIVOS PARA EL USO . . . . . . . . . . . .37

CONEXIONES DE ANTENA/CABLE . . . . . . . . . . .37

CONEXIÓN A UN DISPOSITIVO EXTERNO

(FRONTAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

CONEXIÓN A UN DISPOSITIVO DE AUDIO DIGITAL

(TRASERA) . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

SECCIÓN TV/VCR

FUNCIONAMIENTO Y AJUSTES DEL

TELEVISOR . . . . . . . . . . . . . . . . . . . . . . . . . .39

PARA VER UN PROGRAMA DE TELEVISIÓN . . . .39

AJUSTE DEL RELOJ . . . . . . . . . . . . . . . . . . . . . .39

AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . .40

IDIOMA DE MENÚ DE PANTALLA . . . . . . . . . . . . .40

REPRODUCCIÓN . . . . . . . . . . . . . . . . . . . . . . .41

REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . .41

GRABACIÓN . . . . . . . . . . . . . . . . . . . . . . . . . . .41

GRABACIÓN NORMAL . . . . . . . . . . . . . . . . . . . . .41

GRABACIÓN CON TEMPORIZADOR

AUTOMÁTICO . . . . . . . . . . . . . . . . . . . . . . . . . .42

SECCIÓN DVD

REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . .43

MENÚ DE DISCO/MENÚ DE TÍTULO . . . . . . . . . .43

Para su seguridad y

para evitar daños en la

unidad, desenchufe el

cable de la antena de la

toma ANT. antes de

mover la unidad.

REPARATIVOS PARA EL USO

Antena

Cable

Señal de TV

T0200UA(ES).QX3 06.1.25 6:34 PM Page 37

Cuando vea un programa grabado en otra fuente (videograbadora o videocámara), utilice

las tomas de entrada AUDIO/VIDEO en la parte frontal de la unidad.

Conecte las tomas de salida de Audio/Vídeo de otra fuente a las tomas AUDIO L/R y

VIDEO de esta unidad.

A continuación, utilice [SELECT] o [CH.

] hasta que aparezca "AUX" en la pantalla.

DVD TV/VCR

SELECT

CHANNEL

REW

PLAY

F.FWD

STOP/EJECT

HEADPHONE

VIDEO

AUDIO

L R

VOLUME

POWER

REC/OTR

OPEN/CLOSESTOP

SKIP SKIP

PLAY

HEADPHONE

VIDEO

AUDIOLR

Parte frontal de la

unidad

Cable de audio

(disponible en el mercado)

A las tomas de salida de audio

A la toma de salida de vídeo

Cable de vídeo (disponible en el mercado)

NOTA:

Cuando conecte una VIDEOGRABADORA monoaural (otra fuente) a esta unidad, conecte la toma de salida de audio de

la videograbadora monoaural (otra fuente) a la toma AUDIO L de esta unidad. El sonido saldrá igualmente por ambos

canales L y R (izquierdo y derecho).

AUX

(SALIDA)

(ENTRADA)

(SALIDA)

(ENTRADA)

CONEXIÓN A UN DISPOSITIVO EXTERNO (FRONTAL)

AUDIO OUT

COAXIAL

ANT.

AUDIO OUT

COAXIAL

Puede conectar esta unidad a un dispositivo de audio digital para disfrutar del sonido digital de DVD.

Conecte a un amplificador equipado con tomas de entrada digital, tales como una platina MD o DAT. Para

reproducir un disco DVD en un formato ambiental multicanal Dolby Digital en esta unidad, conéctela a un

decodificador Dolby Digital.

Utilice un cable coaxial digital de audio (disponible en el mercado) para las conexiones de audio.

CONEXIÓN A UN DISPOSITIVO DE AUDIO DIGITAL (TRASERA)

(ENTRADA)

NOTAS:

• La fuente de audio de un disco en formato ambiental multicanal Dolby Digital no puede ser grabado como sonido digital

por una platina MD o DAT.

• Asegúrese de apagar todos los dispositivos del sistema antes de conectar otro dispositivo.

• Consulte los manuales del usuario de los dispositivos que van a conectarse a la unidad.

• Para conectar a una platina MD o DAT, ajuste "DOLBY DIGITAL" en "PCM" para la salida de audio en el modo de

ajuste, y para conectar a un decodificador Dolby Digital, ajuste en "BITSTREAM" (consulte "AUDIO SETTING" en

página 30). Utilizar una unidad con unos ajustes incorrectos puede generar distorsión de ruido y puede asimismo dañar

los altavoces.

Por ejemplo,

videograbadora o

videocámara, etc.

Decodificador

Dolby Digital

Platina MD,

platina DAT, etc.

A la toma de entrada de

audio coaxial digital

A la toma de entrada de

audio coaxial digital

A la toma AUDIO OUT

COAXIAL

(Solamente DVD AUDIO

OUT)

Cable de audio coaxial digital

(disponible en el mercado)

(ENTRADA)

(SALIDA)

PREPARATIVOS PARA EL USO

T0200UA(ES).QX3 06.1.25 6:34 PM Page 38

FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR

AUX

VOLUMEN 20

C C C C C C C C C C C C C C C C

SECCIÓN TV/VCR

PARA VER UN PROGRAMA DE TELEVISIÓN

TV/VCRTV/VCR

1 Después de finalizar la conexión de la

antena o del cable, conecte el cable de

alimentación a una toma estándar de

CA.

2 Presione [POWER] para encender la unidad.

3 Utilice [CH.

] o los botones numéricos

para seleccionar el número de canal deseado.

4 Utilice [VOL. X / Y] para ajustar el volumen.

Presione

[MUTE] para

silenciar al instante el sonido.

Presione de nuevo para

restaurar el nivel de sonido

anterior.

NOTA:

• Incluso aunque apague la unidad en el modo DVD,

la unidad estará en el modo TV/VCR cuando vuelva

a encenderse.

PARA VER UN CANAL DE CABLE O SATÉLITE

Si la unidad está conectada a una caja de cable o

de satélite, utilice

[CH. K / L] para seleccionar

CA3 o CA4 según el ajuste de canal de salida del

dispositivo y seleccionar el canal deseado en dicho

dispositivo.

PARA VER UNA ENTRADA EXTERNA

Cuando un equipo externo esté

conectado a las tomas de entrada

frontales AUDIO/VIDEO, presione

[SELECT] o [CH. K / L]

repetidamente hasta que

aparezca "AUX" en la pantalla.

NOTA:

• Si no hay entrada de señal del terminal de antena ni

se hace funcionar durante 15 minutos, el TV se

apagará automáticamente.

Para utilizar los botones numéricos

•Canales de un dígito: (Ej.: 02, 03, 04, etc.)

Presione primero [0] para seleccionar un canal de un

dígito.

•Canales de dos dígitos: (Ej.: 12, 38, 95 ...)

Presione dos dígitos directamente.

•Canales de tres dígitos: (Ej. 115, 125 ...)

Presione primero

[+100], y luego presione los últimos

dos dígitos.

- TV/VCR PREP. -

COMO PROGRAMAR

B AJUSTE RELOJ

AJUSTE DE CANAL

AJUSTE DE USER

AJUSTE DE V-CHIP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

5:40 PM

Ajuste correctamente el reloj de la

unidad para grabación con temporizador

para videograbadora. Se sugiere ajustar el reloj

manualmente cuando se configure por primera vez

la unidad, y luego fijar el ajuste automático del reloj

en "ON" para corregir la hora periódicamente.

NOTA:

• Si no pude recibir una emisora con las señales

horarias, el ajuste automático del reloj no estará

disponible. Utilice únicamente el ajuste manual.

AJUSTE MANUAL DEL RELOJ

En el siguiente ejemplo, el reloj está ajustado en:

FECHA: 5 de mayo de 2006

HORA DE AJUSTE: 5:40PM

1 Presione [SET-UP].

Utilice

[

] para ir hasta

"AJUSTE RELOJ", y presione

[ENTER].

2 Utilice [

] para ir hasta

"AJUSTE MANUAL RELOJ", y

presione

[ENTER].

• Si no hay ninguna emisora local

PBS en su zona o en su sistema

de cable, seleccione "RELOJ AUT." y presione

[ENTER] para desactivar la función antes de este

paso.

3 Utilice [

] para ajustar los

datos deseados de mes, día,

año, hora y minuto.

Utilice

[s / B] para pasar a

otro elemento.

4 Presione [SET-UP].

Aunque los segundos no se

muestran, se comienzan a

contar desde 00 cuando se

presiona

[SET-UP]. Utilice esta función para

sincronizar el reloj con la hora correcta.

NOTA:

• Cuando desenchufe el cable de CA o si hay un corte

del suministro eléctrico durante más de 3 segundos,

es posible que tenga que reajustar el reloj.

– AJUSTE RELOJ –

RELOJ AUT. [ON]

BUSQ. AUTO RELOJ CA.

CAN. RELOJ AUT. [ 02 ]

B AJUSTE MANUAL RELOJ

HORA VER. [OFF]

SECCIÓN TV/VCR

UNCIONAMIENTO Y AJUSTES DEL TELEVISOR

AJUSTE DEL RELOJ

TV/VCRTV/VCR

– AJUSTE MANUAL RELOJ –

MES DIA AÑO

0 5 / 0 5 VIE 2 0 0 6

HORA MINUTO

0 5 : 4 0 PM

T0200UA(ES).QX3 06.1.25 6:34 PM Page 39

- TV/VCR PREP. -

COMO PROGRAMAR

AJUSTE RELOJ

B AJUSTE DE CANAL

AJUSTE DE USER

AJUSTE DE V-CHIP

IDIOMA [ESPAÑOL

TÍTULO [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

CA 15

NO HAY SEÑAL DE TV

– AJUSTE DE CANAL –

AGREGAR / BORRAR (CATV)

AUTOPROGRAMACIÓN DE CA.

AJUSTE DE CANAL

TV/VCRTV/VCR

IDIOMA DE MENÚ DE PANTALLA

TV/VCRTV/VCR

FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR

SECCIÓN TV/VCR

- TV/VCR PREP. -

COMO PROGRAMAR

AJUSTE RELOJ

AJUSTE DE CANAL

AJUSTE DE USER

AJUSTE DE V-CHIP

B IDIOMA [ESPAÑOL

TÍTULO [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Es necesario preseleccionar el canal al

principio o en caso de haber movido el

televisor a una zona distinta.

AUTOPROGRAMACIÓN DEL CANAL

1 Presione [SET-UP].

Utilice

[

] para ir hasta

"AJUSTE DE CANAL", y

presione

[ENTER].

2 Utilice [

] para ir hasta

"AUTOPROGRAMACIÓN DE

CA.", y presione

[ENTER].

El sintonizador explora y memoriza todos los

canales activos de su zona.

3 Cuando la exploración ha

finalizado, se muestra el canal

memorizado más bajo.

Si en la pantalla del televisor

aparece "NO HAY SEÑAL DE

TV", compruebe la conexión

de la antena y vuelva a

intentar.

NOTAS:

• La unidad puede reconocer canales de CATV como

canales de TV si el estado de la recepción es

deficiente. En tal caso, compruebe la conexión de la

antena y vuelva a intentar "AUTOPROGRAMACIÓN

DE CA.".

•

La autoprogramación del canal NO es necesaria

cuando está conectado a una caja de cable o de

satélite. Simplemente seleccione el canal para

entrada de caja de cable o de satélite (ej. CA3 o

CA4) en la unidad, y seleccione el canal deseado

en la caja de cable o de satélite.

Puede seleccionar el idioma del menú

de pantalla entre inglés, español y

francés.

1 Presione [SET-UP].

Utilice

[

] para ir hasta

"IDIOMA".

2 Presione [ENTER] repetidamente para

seleccionar "ENGLISH", "ESPAÑOL" o

"FRANÇAIS".

3 Presione [SET-UP] para salir del menú.

NOTAS:

• Esta función afecta solamente al idioma del menú de

pantalla y no a la fuente de sonido.

• Si por alguna razón el menú ya está en inglés o en

francés, presione [SET-UP] y mediante [

] vaya

a "LANGUAGE [ENGLISH]" o "LANGAGE

[FRANÇAIS]", y presione [ENTER] repetidamente

para seleccionar el idioma deseado, y presione

[SET-UP].

T0200UA(ES).QX3 06.1.25 6:34 PM Page 40

GRABACIÓN NORMAL

TV/VCRTV/VCR

1 Utilice [CH.

] o los

botones numéricos

para

seleccionar el canal donde se

va a grabar.

NOTA:

• Si la unidad está conectada a una caja de cable o

de satélite, deberá estar en CA3 o CA4. Seleccione

en la caja de cable o de satélite el canal donde se

va a grabar.

2 Presione [SPEED] para

seleccionar la velocidad de

cinta deseada (SP/SLP).

(Consulte "SELECTING TAPE

SPEEDS" en página 15.)

3 Presione [REC] para iniciar la

grabación.

4 Presione [PAUSE

] para

interrumpir temporalmente la

grabación de escenas no

deseadas.

Presione

[PAUSE

] de

nuevo o

[REC] para reanudar

la grabación.

NOTA:

• Si la grabación se mantiene en pausa durante más

de 5 minutos, la unidad pasará automáticamente al

modo de grabación para que la cinta no sufra daños.

5 Presione [STOP

] para interrumpir la

grabación.

PARAR

REBOBINAR

AV RAPIDO

EXPULSAR

REPRODUCCIÓN / GRABACIÓN

NOTAS:

• Inserte una cinta de casete con la lengüeta de

protección contra borrado sin quitar.

• Esta unidad no puede grabar el contenido del DVD

incorporado.

• SOLAMENTE podrá ver el mismo programa de

televisión que se esté grabando.

CA 10

GRABAR

PAUSA

SECCIÓN TV/VCR

REPRODUCIR

REPRODUCCIÓN BÁSICA

TV/VCRTV/VCR

EPRODUCCIÓN

RABACIÓN

Inserte una cinta pregrabada. Si se ha

quitado la lengüeta de protección contra

borrado, la unidad empezará la

reproducción automáticamente.

2 Seleccione el modo TV/VCR

presionando

[SELECT].

3 Para iniciar la reproducción,

presione

[PLAY

NOTA:

•

Incluso en el modo DVD, puede iniciar la reproducción

en videograbadora si presiona [PLAY

] en el panel

frontal (del lateral de TV/VCR).

Para interrumpir la reproducción,

presione

[STOP

Para rebobinar la cinta, presione

[REV

Para hacer avanzar la cinta,

presione

[FWD

Para interrumpir el movimiento de

la cinta, presione

[STOP

Para expulsar la cinta de la unidad,

presione

[STOP/EJECT

C A

] en el

panel frontal.

AJUSTE DE SEGUIMIENTO

•

El ajuste de seguimiento se establecerá automáticamente

al iniciar la reproducción (función de seguimiento digital).

•

Si aparecen líneas de ruido (rayas negras y blancas) en la

imagen de reproducción, utilice

[CH.

] hasta que las rayas

desaparezcan (ajuste de seguimiento manual). Esto también

está disponible en el modo Pausa/Imagen fija/Cámara lenta.

•

Para desactivar el modo de seguimiento manual, pare

la cinta una vez e inicie de nuevo la reproducción.

IMAGEN FIJA

• Durante la reproducción, presione [PAUSE F]

para congelar la imagen.

Puede avanzar la imagen fotograma a fotograma

presionando repetidamente

[PAUSE F].

•

Para desactivar el modo de imagen fija, presione [PLAY

CÁMARA LENTA

• Durante la reproducción, presione [PAUSE F] y, a

continuación presione

[FWDD].

•

Para desactivar el modo de cámara lenta, presione [PLAY

NOTA:

•

Si la unidad se mantiene en el modo cámara lenta o imagen fija durante

más de 5 minutos, entrará automáticamente en el modo de parada.

T0200UA(ES).QX3 06.1.25 6:34 PM Page 41

- TV/VCR PREP. -

B COMO PROGRAMAR

AJUSTE RELOJ

AJUSTE DE CANAL

AJUSTE DE USER

AJUSTE DE V-CHIP

IDIOMA [ESPAÑOL]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

PRG. ESTAR LISTO

– COMO PROGRAMAR –

CA FECHA INICIO FINAL

61 7/03 LUN 7:30

8:50

- -

- - -/- - - - - -:- - -:- - - -

– COMO PROGRAMAR –

CA FECHA INICIO FINAL

61 7/03 LUN 7:30

8:50

- - -/- - - - - -:- - -:- - - -

Utilice [

] para ajustar la hora

y el minuto de inicio/fin deseados.

Presione

[

] para pasar al

siguiente elemento.

Utilice [

] hasta que aparezca la

velocidad de cinta deseada.

(Consulte "SELECTING TAPE SPEEDS"

en página 15.)

7 Presione [ENTER] para finalizar el ajuste.

•

Para ajustar otro programa, repita los pasos 2 a 7.

•Para corregir el programa durante el ajuste,

presione

[

] para retroceder un paso y utilice

[

] para introducir los números correctos.

• Presione

[SET-UP] para salir del menú.

8 Presione [POWER] para ajustar la grabación

con temporizador automático.

El indicador de grabación se enciende.

NOTAS:

• DEBE apagar la unidad para activar la grabación

con temporizador automático.

•

Si no se apaga la unidad y sigue

usted viendo la televisión, "PRG.

ESTAR LISTO" empieza a parpadear

en la pantalla del televisor 2 minutos

antes de la hora de inicio programada.

•

Asegúrese de insertar una cinta con lengüeta de

protección contra borrado antes de apagar la unidad.

Si la cinta no tiene la lengüeta, será expulsada

cuando se presione [POWER] para apagar.

9 En la hora de inicio programada, la unidad

empieza a grabar.

NOTAS:

• La grabación comienza sin encenderse la pantalla

del televisor.

• Durante la grabación, puede ver solamente el

programa de televisión que se esté grabando

actualmente o una reproducción de DVD.

Presione

[POWER] y [SELECT] para seleccionar el

modo deseado.

•

Si la cinta se acaba antes de la hora de finalización, la grabación

se interrumpe inmediatamente y la cinta es expulsada.

PARA CONFIRMAR EL PROGRAMA

1 Presione [POWER] para encender la unidad.

(El indicador de grabación se apaga.)

2 Presione [SET-UP].

Utilice

[

] para seleccionar "CÓMO

PROGRAMAR", y presione

[ENTER].

3 Confirme los detalles de los programas que

aparecen en la pantalla del televisor.

4 Presione [SET-UP] para salir del menú.

– COMO PROGRAMAR –

CA FECHA INICIO FINAL

- - -/- - - - - -:- - -:- - - -

– COMO PROGRAMAR –

CA FECHA INICIO FINAL

61 -/- - - - - -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

– COMO PROGRAMAR –

CA FECHA INICIO FINAL

61 CADA LUN -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

– COMO PROGRAMAR –

CA FECHA INICIO FINAL

61 7/03 LUN -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

– COMO PROGRAMAR –

CA FECHA INICIO FINAL

61 CADA DIA -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

Puede ajustar ocho programas para grabar en

días concretos, diariamente o semanalmente,

dentro de un periodo de un año.

En el siguiente ejemplo, el temporizador está

ajustado para grabar:

FECHA: 3 de julio de 2006

HORA DE AJUSTE: de7:30PM a 8:50PM

CANAL: CA61

VELOCIDAD DE CINTA: SP

1 Presione [SET-UP].

Utilice

[

] para seleccionar

"CÓMO PROGRAMAR", y

presione

[ENTER].

NOTA:

• Si todavía no ha ajustado el reloj, aparece el menú

"AJUSTE MANUAL RELOJ". Ajuste la hora y la

fecha actuales (consulte "AJUSTE MANUAL DEL

RELOJ" en página 39) e inicie el ajuste de la

grabación con temporizador.

2 Utilice [

] para seleccionar

la posición del programa

deseado y presione

[

3 Utilice [

] hasta que

aparezca el número del canal

deseado y presione

[

NOTA:

•

Si la unidad está conectada a una caja de cable o de

satélite, deberá estar en CA3 o CA4. Seleccione en la

caja de cable o de satélite el canal donde se va a grabar.

4 Ajuste la fecha de inicio.

Para una única grabación :

Presione [

] hasta que

aparezca la fecha deseada. A

continuación, presione

[

Para una grabación cada día

Para grabar el mismo canal a la

misma hora cada día.

Presione [

] hasta que

aparezca "CADA DÍA", y

presione

[

Para una grabación semanal

Para grabar el mismo canal a la

misma hora cada semana.

Presione [

] hasta que aparezca "CADA" y su

día deseado de la semana (por ejemplo, "Cada

lunes"), y presione

[

GRABACIÓN CON TEMPORIZADOR AUTOMÁTICO

TV/VCRTV/VCR

GRABACIÓN

SECCIÓN TV/VCR

T0200UA(ES).QX3 06.1.25 6:34 PM Page 42

SECCIÓN DVD

1 Presione [POWER] para

encender la unidad.

2 Presione [OPEN/CLOSE

] en la unidad.

3 Coloque el disco en la

bandeja, con la etiqueta hacia

arriba.

4 Presione [PLAY

• La bandeja se cerrará automáticamente y se

empezará la reproducción. Cuando reproduzca un

DVD que incluya un menú de títulos, este menú

puede aparecer en pantalla.

NOTAS:

• Cerrar la bandeja del disco manualmente o

presionando [OPEN/CLOSE

] también inicia la

reproducción.

• Con discos DVD que utilicen títulos para señales de

programa de reproducción, la reproducción puede

comenzar desde el segundo título o puede omitir

dichos títulos.

5 Para congelar la imagen, presione [PAUSE

]

durante la reproducción.

NOTA:

• El sonido se silenciará en modo de pausa.

6 Presione [STOP

] para

interrumpir temporalmente la

reproducción.

• Presione

[PLAY

] para

reanudar la reproducción.

• Para cancelar la reanudación y

parar el disco, presione

[STOP

] de nuevo.

NOTAS:

• La información de reanudación se conserva aunque

se apague la unidad.

• Puede aparecer un "icono

prohibido" en la zona superior

derecha de la pantalla del

televisor durante la operación. Esto significa que la

operación no está disponible en el disco.

REPRODUCCIÓN PASO A PASO

• Durante la reproducción, presione

[PAUSE F].

Puede avanzar la imagen fotograma a fotograma

presionando repetidamente

[PAUSE F].

•Para volver a la reproducción normal, presione

[PLAY

REPRODUCCIÓN BÁSICA

Un DVD puede contener menús para explorar

el disco y acceder a funciones especiales.

1 Presione [DISC MENU] o [TITLE].

•

Aparecerá el menú principal/menú de título del DVD.

•

Puede activar el menú incluso durante la reproducción.

2 Utilice [

] para seleccionar un

elemento y presione

[ENTER].

NOTAS:

• SI el disco tiene un menú de disco, aparecerán

distintas opciones de selección: idioma de sonido,

subtítulos, capítulos del título y otras.

• El contenido del menú y las correspondientes

operaciones de menú pueden variar según los

discos. Para más detalles, consulte el manual que

acompaña el disco.

MENÚ DE DISCO/MENÚ DE TÍTULO

Presione 'PLAY' para reproducir

desde aquí.

Para reproducir desde el inicio,

primero presione 'STOP' y luego

'PLAY'.

REANUDACIÓN ACTIVADA

AVANCE RÁPIDO / RETROCESO RÁPIDO

• Durante la reproducción, mantenga

presionado

[FWD

] para avance

rápido o

[REV

] para retroceso rápido.

• Cada vez que mantenga

presionado el botón, la

reproducción se acelera y el

nivel de velocidad aparece en la pantalla.

NOTAS:

•

En los discos DVD, la velocidad de avance/retroceso

rápido es diferente según el disco. La velocidad

aproximada es 1 (×2), 2 (×8), 3 (×20), 4 (×50) y 5 (×100).

• En discos de CD de audio la velocidad aproximada

es 1 (×2), 2 (×8) y 3 (×30).

• Cuando utilice los botones del panel frontal, utilice

[SEARCH

•

Para volver a la reproducción normal, presione [PLAY

AVANCE LENTO / RETROCESO LENTO

•

Durante la reproducción, presione [PAUSE

• Mantenga presionado [FWD

] para

avance lento o

[REV

] para retroceso lento.

• Cada vez que mantenga

presionado el botón, la

reproducción se ralentiza y el

nivel de velocidad aparece en la pantalla.

NOTAS:

• La velocidad de avance/retroceso lento varía según

el disco. La velocidad aproximada es 1 (1/16), 2

(1/8) y 3 (1/2).

• Cuando utilice los botones de la unidad principal,

utilice [SEARCH

•Para volver a la reproducción normal, presione

[PLAY

SECCIÓN DVD

T0200UA(ES).QX3 06.1.25 6:34 PM Page 43

Printed in Thailand 1EMN21493

T0200UA

★★★★★

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or work-

manship as follows:

DURATION:

PARTS:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year

from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are

excluded from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the

date of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE

RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER

WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,

missing or if service was attempted by an unauthorized service center. This limited warranty does not

apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal

use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alter-

ations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse,

mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as

hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of

God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR

ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED

BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU

OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE

PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS

REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SER-

VICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHO-

RIZED SERVICE CENTER.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT

FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITH-

OUT PRIOR NOTICE.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,

please contact us at:

FUNAI CORPORATION

Customer Service

Tel :1-800-968-3429

http://www.SylvaniaConsumerElectronics.com

19900 Van Ness Avenue, Torrance, CA 90501

T0200UA(EN).QX3 06.1.25 6:26 PM Page 37

Magnavox MWC20T6 Manual de usuario

Marca: Magnavox

Modelo: MWC20T6

Categoría: Reproductores de casete

Tipo: Manual de usuario

Este manual también es adecuado para

Descargar PDF

informe

En otros idiomas

English: Magnavox MWC20T6 User manual

Magnavox MWC20T6 Manual de usuario

Este manual también es adecuado para

Magnavox MWC20T6 Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos