Color Television
32AX60/36AX60
Owner’s Manual
Reference
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
© 2000 TOSHIBA CORPORATION
All Rights Reserved
SAFETY PRECAUTIONS
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ADVERTENCIA RIESGO DE
DESCARGA ELÉCTRICIA - NO ABRIR
The lightning symbol in the triangle tells you that the
voltage inside this product may be strong enough to
cause an electric shock. DO NOT TRY TO SERVICE
THIS PRODUCT YOURSELF.
The exclamation mark in the triangle tells you that
important operating and maintenance instructions
follow this symbol.
CAUTIONS
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS
POLARIZED PLUG WITH AN EXTENSION CORD RECEP-
TACLE OR OTHER OUTLET UNLESS THE PRONGS CAN BE
FULLY INSERTED INTO THE OUTLET TO PREVENT ANY
EXPOSURE OF THE PRONGS ON THE POLARIZED PLUG.
PRECAUCIONES
PARA EVITAR DESCARGAS ELÉCTRICAS, NO UTILICE ESTE
ENCHUFE POLARIZADO CON UN RECEPTÁCULO DE
CABLE DE EXTENSIÓN U OTRA TOMA SALVO QUE LA
CLAVIJA ESTÉ COMPLETAMENTE INSERTADA EN LA
TOMA PARA EVITAR CUALQUIER EXPOSICIÓN DE LOS
VÁSTAGOS DEL ENCHUFE POLARIZADO.
WARNING
To avoid personal injury:
• Do not stand or climb on the TV.
• Do not put a VCR or any heavy object on top of the TV.
ADVERTENCIA
Para evitar daños personales:
• No se ponga de pie en el TV ni suba a él.
• No coloque el vídeo (p. ej. VCR) ni otro objeto pesado en la parte
superior del TV.
Avoid displaying stationary images on your TV screen for extended
periods of time. Stationary patterns generated by a picture-in-picture
(PIP) display, computer displays, video games, stock market reports,
etc., can become permanently engrained on the picture tube. This
damage is not protected by your warranty because it is the result of
misuse. If you wish to use your TV to display still images, reduce
brightness and contrast settings. Never leave a PIP, computer, or video
game display unattended.
This TV set should be used with the Toshiba stand listed on page 33.
Use with other stands may result in instability, causing possible injury.
Note to CATV system installers in the USA
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC, which provides guidelines
for proper grounding, and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.
IMPORTANT SAFETY
INSTRUCTIONS
INSTRUCCIONES DE
SEGURIDAD
CAUTION
PLEASE READ AND OBSERVE ALL WARNINGS AND
INSTRUCTIONS CONTAINED IN THIS SECTION AND
THOSE ON YOUR TV SET.
RETAIN THIS SECTION FOR REFERENCE.
PRECAUCIÓN
LEA Y TENGA EN CUENTA TODAS LAS ADVERTENCIAS E
INSTRUCCIONES QUE SE ENCUENTRAN EN ESTE
PANFLETO Y LAS DE LOS APARATOS DE TELEVISIÓN.
MANTENGA ESTE PANFLETO PARA FUTURAS
REFERENCIAS.
Electrical energy can perform many useful functions. This TV set has
been engineered and manufactured to assure your personal safety.
However, improper use can result in potential electrical shock or fire
hazards. In order not to defeat the safeguards incorporated in this TV
set, observe the following basic rules for antenna/TV installation, use
and servicing.
Do not remove the cabinet cover. This may expose you to dangerous
voltages. Refer all servicing to qualified service personnel.
La energía eléctrica puede realizar funciones muy útiles. Este televisor
ha sido diseñado y fabricado para asegurar su seguridad personal. Sin
embargo, la utilización inadecuada del mismo puede resultar en
descargas eléctricas o en el riesgo de incendios. Para no anular las
protecciones incorporadas en este televisor, tenga en cuenta las reglas
básicas de instalación de la antena/televisor, y en caso de proplemas
póngase en contacto con un centro de reparaciones.
No extraiga de la cubierta de la caja. Esto podría dejarle expuesto a
tensiones peligrosas. En caso de averia, consulte los servicios de
personal cualificado.
INSTALLATION / INSTALACIÓN
Power Sources — The TV set should be operated only from the type of
power source indicated on the TV set or as indicated in the Owner’s
Manual. If you are not sure of the type of power supply in your home,
consult your sales person or your local power company. For TV sets
designed to operate from battery power, refer to the operating
instructions.
Fuentes de alimentación — Este televisor solamente deberá alimentarse
con la fuente de alimentación indicada en la etiqueta de características.
Si no está seguro del tipo de fuente de alimentación de su hogar,
consulte al proveedor de su televisor o a la compañia eléctrica local.
Para productos destinados a alimentarse con pilas, u otras fuentes,
consulte las instrucciones de operación.
Grounding or Polarization — The TV set is equipped with one of the
following type plugs. If the plug should fail to fit the power outlet,
contact your electrician to replace your obsolete outlet. DO NOT
defeat the safety purpose of the type plug on the TV set.
Puesta a tierra o polarización — Este televisor puede poseer un enchufe
de los tipos siguinetes. Si el enchufe no entra en la toma de la red, póngase
en contacto con un electricista para que le cambie
la toma anticuada. NO
anule el fin de seguirdad de sete tipo de enchufe del televisor.
ii
A product and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the product
and cart combination to overturn.
La combinación de un producto y
un carrito deberá moverse con
cuidado. Las paradas repentinas,
la fuerza excesiva, y las superficies
desiguales pondrían hacer que
volcase la combinación del carrito
y del producto.
USE / UTILIZACIÓN
Overloading — Do not overload wall outlets, extension cords or
convenience receptacles beyond their capacity, since this can result in
fire or electric shock.
Sobrecarga — No sobrecargue las tomas de la red, los cables
prolongadores, ni los adaptadores para múltiples tomas, ya que esto
supondría el riesgo de incendios o de descargas eléctricas.
During lightning storms, or when the TV set will be left unattended
and unused for a long period of time, unplug the power cord from the
wall outlet and disconnect the antenna or cable system. This will
prevent damage to the TV set due to lightning and power-line surges.
Durante tormentas eléctricas, o cuando no vaya a utilizar el televisor
durante mucho tiempo, desenchufe el cable de alimentación de la toma
de la red y desconecte la antena o el sistema de cablevisión. Esto evitará
que se dañe el televisor debido a rayos y a sobretensiones repentinas en
la red.
Object and Liquid Entry — Never push objects of any kind into the
TV set through the cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the TV set.
Entrada de objetos y líquidos — No introduzca nunca objetos de
ningún tipo en este televisor a través de las aberturas, ya que podrían
tocar puntos de tensión peligrosa o cortocircuitar piezas, lo que podría
resultar en incendio o descarga eléctrica. No vierta nunca liquidos de
ningún tipo sobre este televisor.
Cleaning — Unplug the TV set from the wall outlet before cleaning or
polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth
lightly dampened with water for cleaning the exterior of the TV set.
Limpieza — Desenchufe el televisor de la toma de la red antes de
limpiarlo. No utilice limpiadores líquidos ni aerosoles. Para limpiar el
exterior del televisor, utilice un paño ligeramente humedecido en agua.
Attachments — Never add accessories that have not been specifically
designed for the TV set. Never remodel the TV set by yourself as this
can result in a fire hazard or electric shock.
Aditamentos — No utilice aditamentos no recomendados por el
fabricante del televisor, ya que podrían suponer un peligro. No
remodele nunca el televisor usted mismo, ya que esto podría causar el
riesgo de incendios o descargas eléctricas.
If a snapping or popping sound from a TV set is heard continuously or
frequently while the TV set is operated, unplug the TV set and consult
your dealer or service technician. It is normal for some TV sets to make
occasional snapping or popping sounds, particularly when being turned
on or off.
Si se oye un sonido seco de un televisor continuo o frecuente mientras
el televisor esté funcionando, desenchúfelo y consulte a su proveedor o
a un técnico de servicio. Es normal que algunos televisores produzcan
sonidos secos, particularmente cuando conecte o desconecte su
alimentación.
A polarized alternating current line plug — having one blade wider
than the other. This plug will fit into the power outlet only one way. If
you are unable to insert the plug into the outlet, try reversing the plug.
Un enchufe de línea de corriente alterna polarizado — posee una
cuchilla más ancha que la otra. Este enchufe entrará en la toma de la
red de una sola forma. Si no puede inertar el enchufe en la toma de la
red, trate de invertirlo.
Alternate Warnings — A three-wire grounding-type plug — a plug
having a third (grounding) pin. This plug will only fit into grounding-
type power outlet.
Advertencias alternativas — Enchufe de tippo puesta a tierra de tres
conductores — enchufe que posee un tercer terminal (de puesta a
tierra). Este enchufe solamente encajará en una toma de la red de tipo
puesta a tierra.
Water and Moisture — Do not use the TV set near water — for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
Agua y humedad — No utilice el televisor cerca del agua — por
ejemplo, cerca de una bañera, un lavabo, un fregadero, una lavadora, en
un sótano húmedo, cerca de una piscina, ni lugares por el estilo.
Ventilation — The slots and openings in the cabinet and in the back or
bottom are provided for necessary ventilation. Never block or cover
these slots and openings to ensure reliable operation of the TV set and
to protect it from overheating.
Ventilación — Las ranuras y aberturas de la caja y de la parte posterior
o de la base son para proporcionar la ventilación necesaria. Para
asegurar la operación fiable del televisor para protegerlo contra el
recalentamiento. No bloquee ni cubra nunca estas ranuras y aberturas.
a. Never cover the slots and openings with a cloth or other materials.
a. No cubra nunca las ranuras ni las aberturas con paños ni otros
materiales.
b. Never block the slots and openings by placing the TV set on a bed,
sofa, rug or other similar surface.
b. No bloquee nunca las ranuras ni las aberturas colocando el televisor
sobre una cama, un sofá, una alfombra, ni demás superficies similares.
c. Never place the TV set in a confined space such as a bookcase, built-
in cabinet, or any other place of poor ventilation.
c. No coloque nunca el televisor en un espacio cubierto, como una
librería o un estante empotrados, nien un lugar de mala ventilación.
Heat — Do not place the TV set near or over a radiator or heat
register, or where it is exposed to direct sunlight.
Calor — No coloque el televisor cerca ni sobre un radiador ni un
registro de calor, ni expuesto a la luz solar directa.
Power-Cord Protection — Do not allow anything to rest on or roll
over the power cord, and do not place the TV set where the power cord
is subject to wear or abuse.
Protección del cable de alimentación — No coloque ni pase sobre el
cable de alimentación, ni coloque el telivisor donde su cable de
alimentación pueda sufir cualquier tipo de daños.
Accessories — Do not place the TV set on an unstable cart, stand,
tripod, bracket, or table. The TV set may fall, causing serious injury to
a child or adult, and serious damage to the TV set. Use only with a cart,
stand, tripod, bracket, or table recommended by the manufacturer, or
sold with the TV set, and should use a mounting accessory recom-
mended by the manufacturer.
Accesorios — No coloque el televisor sobre un carrito, una base, un
trípode, un soporte ni una mesea inestable. El televisor podría caerse,
causando serios daños a niños o adultos, o al propio televisor. Utilice
solamente el carrito, la base, el trípode, el soporte, o la mesa que
recomiende el fabricante, o que se venda con el televisor, y utilice un
accesorio de montaje recomendado por el fabricante.
iii
SERVICE / SERVICIO DE REPARACIÓN
Damage Requiring Service — Unplug the TV set from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
Daños que requieren el servicio de reparación — En los casos
siguientes, desenchufe el televisor de la toma de la red y solicite los
servicios de personal de reparación especializado:
a. When the power cord or plug is damaged or frayed.
a. Cuando se haya dañado el cable de alimentación o el enchufe.
b. When liquid has been spilled into the TV set.
b. Cuando se haya vertido líquido dentro del televisor.
c. When the TV set has been exposed to rain or water.
c. Cuando el televisor haya estado expuesto a la lluvia o al agua.
d. When the TV set has been subject to excessive shock by being
dropped, or the cabinet has been damaged.
d. Cuando el televisor haya estado expuesto a golpes excesivos o haya
caído, o su caja se haya dañado.
e. When the TV set does not operate normally even though you follow
the operating instructions. Adjust only those controls that are
specified in the operating instructions. Improper adjustment of
other controls may result in damage and will often require extensive
work by a qualified technician to restore the TV set to normal
operation.
When the TV set exhibits a distinct change in performance. This
indicates a need for service.
e. Cuando el televisor no funcione normalmente incluso al seguir las
instrucciones de operación. Ajuste solamente los controles indicados
en las instrucciones de operación, ya que un ajuste inadecuado de
otros controles podría resultar en daños y a menudo requerirán un
trabajo difícil por un técnico cualificado para devolver el televisor a
su funcionamiento normal.
Cuando el funcionamiento del televisor haya cambiado
notablemente — esto indica la necesidad del servicio de reparación.
Servicing — Do not attempt to service the TV set yourself. To open or
remove the covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
Reparación — No intente nunca reparar el televisor por sí mismo. La
apertura o extracción de cubiertas podría exponerle a tensiones
peligrosas u otros peligros. En caso de avería solicite los servicios de
personal de reparación cualificado.
Replacement Parts — When replacement parts are required, be sure
the service technician certifies in writing that he has used replacement
parts specified by the manufacturer that have the same characteristics as
the original parts. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
Reemplazo de piezas — Cuando sea necesario reemplazar piezas,
cerciórese de que el técnico de reparación utilice las piezas de reemplazo
especificadas por el fabricante u otras que posean las mismas
características que las originales. Las substituciones no autorizadas
podrían resultar en incendios, descargas eléctricas, u otros peligros.
Safety Check — Upon completion of any service or repairs to the TV
set, ask the service technician to perform routine safety checks (as
specified by the manufacturer) to determine that the TV set is in safe
operating condition, and to so certify.
Comprobación de seguridad — Al finalizar cualquier reparación de
este televisor, solicite al técnico de reparación que realice las
comprobaciones de sguridad (especificadas por el fabricante) para
determinar y certificar si el producto se encuentra en las condiciones de
operación apropiadas.
When the TV set reaches the end of its useful life, improper disposal
could result in a picture tube implosion. Ask a qualified service
technician to dispose of the TV set.
Cuando el televisor llegue al final de su vida útil, si se deshace de él de
forma inapropiada, el tubo de imagen puede explotar. Cuando desee
deshacerse de un televisor, solicite este servicio a un técnico de
reparación especializado.
ANTENNA / ANTENA
Outdoor Antenna Grounding — If an outdoor antenna is installed,
follow the precautions below.
An outdoor antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where
it can come in contact with such power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR CIRCUITS AS
CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.
Be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section
810 of the National Electrical Code in the USA and Section 54 of the
Canadian Electrical Code in Canada provides information with respect
to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
Puesta a tierra de la antena exterior — Cuando instale una antena
exterior, tenga en cuenta las precauciones siguientes.
Un sistema de antena esterior no deberá colocarse cerca de líneas de alta
tensión ni otros circuitos de iluminación o alimentación, ni donde
pueda entrar en contacto con tales líneas o circuitos.
CUANDO INSTALE UN SISTEMA DE ANTENA EXTERIOR,
TENGA EXTREMADO CUIDADO PARA EVITAR QUE ENTRE
EN CONTACTO CON TALES LÍNEAS DE ALIMENTACIÓN O
CIRCUITOS, YA QUE TAL CONTACTO PODRÍA RESULTAR
INVARIABLEMENTE FATAL.
Cerciórese de que el sistema de antena esté puesto a tierra a fin de que
proporcione cierta protección contra sobretensiones y cargas estáticas.
La Sección 810 del Código Eléctrico Nacional (NEC) de EE.UU. y la
Sección 54 del Código Eléctrico Canadiense ofrecen informacón con
respecto a la puesta a tierra adecuada de una unidad de descarga de
antena, el tamaño de los conductores de puesta a tierra, la ubicación de
la unidad de descarga de la antena, la conexión de los electrodos de
puesta a tierra, y los requisitos de tales electrodos.
iv
v
Welcome to Toshiba ..............................................................................................................................1
Exploring your new TV...............................................................................................................................1
Selecting a location for the TV ....................................................................................................................1
Connecting your TV...............................................................................................................................2
Connecting a VCR......................................................................................................................................2
Connecting a cable converter box................................................................................................................3
Connecting a cable converter box and VCR................................................................................................ 3
Connecting a DVD/satellite receiver and VCR ........................................................................................... 4
Connecting a DVD with ColorStream™ and a VCR .................................................................................4
Connecting two VCRs ................................................................................................................................5
Connecting a camcorder ............................................................................................................................. 6
Connecting an audio amplifier....................................................................................................................6
Using the remote control .....................................................................................................................7
Preparing the remote control for use ...........................................................................................................7
Installing the remote control batteries .........................................................................................................7
Using the remote control with a VCR or cable TV converter ...................................................................... 7
Programming the remote control for use with a VCR or cable TV converter ...............................................8
VCR code table.....................................................................................................................................8
Cable TV converter code table .............................................................................................................. 9
Learning about the remote control ............................................................................................................ 10
Setting up your TV .............................................................................................................................. 11
Changing the on-screen display language ..................................................................................................11
Selecting the antenna input.......................................................................................................................11
Using the TV/VIDEO button on the TV............................................................................................12
Adding channels to the TV’s memory .......................................................................................................12
Programming channels automatically ..................................................................................................12
Adding and erasing channels manually................................................................................................ 13
Changing channels.................................................................................................................................... 13
Using the TV’s features...................................................................................................................... 13
Adjusting the channel settings................................................................................................................... 13
Switching between two channels .........................................................................................................13
Programming your favorite channels ................................................................................................... 14
Using the V-Chip...................................................................................................................................... 15
Selecting a PIN code ...........................................................................................................................15
Blocking programs by ratings .............................................................................................................. 17
Ratings definitions (MPAA, Youth TV, TV) ........................................................................................17
Blocking unrated movies and programs ...............................................................................................19
Blocking channels ...............................................................................................................................20
vi
Video Lock ............................................................................................................................................... 21
Channel labels........................................................................................................................................... 22
Video labels............................................................................................................................................... 23
Watching picture-in-picture (PIP) .............................................................................................................24
Switching the main and small pictures ................................................................................................ 24
Changing the position of the small picture.......................................................................................... 25
Freezing the small picture.................................................................................................................... 25
Watching multi-window PIP..................................................................................................................... 25
Adjusting the picture................................................................................................................................. 26
Adjusting the picture quality ............................................................................................................... 26
Selecting the color temperature ........................................................................................................... 26
Adjusting the picture preference..........................................................................................................27
Watching video input................................................................................................................................ 27
Displaying on-screen information ............................................................................................................. 27
Setting the off-timer.................................................................................................................................. 27
Auto power off ..........................................................................................................................................27
Using the closed caption feature ................................................................................................................ 28
Adjusting the sound .................................................................................................................................. 29
Muting the sound ............................................................................................................................... 29
Selecting stereo/SAP broadcasts........................................................................................................... 29
Adjusting the sound quality................................................................................................................. 30
Using the surround sound feature ....................................................................................................... 30
Using the sub-bass system (SBS) ......................................................................................................... 31
Viewing the demonstration (DEMO) mode..............................................................................................31
Understanding the last mode memory feature ........................................................................................... 31
Appendix............................................................................................................................................... 32
Cleaning and care......................................................................................................................................32
Troubleshooting ........................................................................................................................................ 32
Specifications ............................................................................................................................................ 33
Limited United States warranty................................................................................................................. 34
Attention Canadian customers ............................................................................................................ 35
Index ...................................................................................................................................................... 36
1
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Welcome to Toshiba
Congratulations! You have purchased one of the finest color TVs on
the market. The goal of this manual is to guide you through setting up
and operating your Toshiba TV as quickly as possible. Please make sure
you have received the following items: TV, remote control, batteries,
manual, registration card, and extended service plan literature. If you
did not receive all of the items or if any of the items are damaged or
broken, please contact your Toshiba dealer. In addition, you may need
to purchase other audio or video cables to connect your equipment.
See “Connecting your TV” on page 2 for more information.
Please read all safety and operating instructions carefully before you
begin.
Exploring your new TV
You can operate your TV using the buttons on the front panel or the
remote control. The back panel provides all the terminal connections
you will need to connect other equipment to your TV.
Selecting a location for the TV
• Place the TV on the floor or on a sturdy platform in a location
where light does not directly hit the screen.
• Place the TV far enough from the walls to allow proper ventila-
tion. Inadequate ventilation may cause overheating, which may
damage the TV.
The model number and serial number are on the back of your TV.
Record these numbers in the spaces below. Refer to these numbers
whenever you communicate with your Toshiba dealer about this TV.
Model number: ________________________
Serial number: ________________________
wide prong
Caution:
The plug has one prong wider than the other
and will fit only one way into a standard
electrical outlet (120 volt AC, 60 Hz). If the
plug does not fit into the outlet, try turning it
around. If the plug still does not fit, the outlet
is probably non-standard and must be
replaced by a qualified electrician. Do not
tamper with the plug or try to force it
into a non-standard outlet.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIP
REC
STILL LOCATE SWAP
TV/VCR REW FF
STOP SOURCE
FAV
FAV
C.CAPT
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
MENU
POWER
Channel
36AX60
TV/VIDEO
TV/Video
Volume
Power Indicator (Red)
Remote Sensor
POWER
VOLUME CHANNEL
Video 3
VIDEO
L/MONO
R
VIDEO-3 IN
AUDIO
Video 3
MENU TV/VIDEO VOLUME CHANNEL
Menu POWER
POWER
Power Indicator (Red)
TV/Video
32AX60
Volume Channel
Remote Sensor
VIDEO
L/MONO
R
VIDEO-3 IN
AUDIO
ANT (75Ω)
INOUTDVD IN
VIDEO
ANT-1 OUT ANT-2
COLOR
STREAM
INPUT
VIDEO 2 VIDEO 1
MONO
L/MONO
VIDEO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
ANT-1 OUT
ANT (75Ω)
ANT-2
INOUTDVD IN
VIDEO
COLOR
SYSTEM
INPUT
VIDEO 2 VIDEO 1
MONO
L/MONO
VIDEO
L
R
AUDIOAUDIO
S VIDEO
R
AUDIO
Y
Cr
Cb
2
Reference
Connecting
your TV
Connecting your TV
If you have not connected electronic equipment before, or you have
been frustrated in the past, you may wish to read this section.
Note: Cables are not supplied.
• A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use “F” connectors.
• Audio and video cables are usually color coded according to use:
yellow for video; red and white for audio. The red audio cable is
for the stereo right channel; the white audio cable is for the stereo
(or mono) left channel. If you look at the rear panel of the TV,
you will see that the terminals are color coded in the same manner
as the cables.
• S-video cables provide better picture performance. S-video cables
can be used only with S-video compatible components.
• ColorStream
TM
cables come in sets of three and provide the best
picture performance. ColorStream cables can be used only with
ColorStream compatible components.
ANTENNA
Coaxial Cable
AUDIO
Cable
VIDEO
Cable
ColorStream
Cable
S-Video
Cable
Connecting a VCR
This connection allows you to watch local channels and video pro-
grams, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
• one coaxial cable
• one pair of audio cables (only one cable for a mono VCR)
• one video cable
Stereo VCR
VIDEO AUDIO
OUT
IN from ANT
CH 3
CH 4
OUT to TV
LR
IN
ANT-1 OUT
ANT (75Ω)
ANT-2
INOUTDVD IN
VIDEO
COLOR
STREAM
INPUT
VIDEO 2 VIDEO 1
MONO
L/MONO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
TV
Cable Lead-in from Cable Box
or Antenna
VIDEO
Caution:
Do not plug in the TV power cord until
you have finished connecting all of your
equipment.
Caution:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have an S-VHS VCR, use the S-video
connections and omit the video cable.
Do not connect the video cable and the
S-video cable to Video-1 simultaneously.
3
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Connecting a cable converter box
This connection allows you to watch cable and premium channels.
To use the TV features (such as PIP swap, Channel
y z, channel
block, favorite channels, or channel labels ), select ANT-1. To view
premium channels, select ANT-2, tune the TV to channel 3 or 4
(whichever channel is vacant in your area), and use the converter box
to change channels.
You will need:
• two coaxial cables
ANT-1 OUT
ANT (75Ω)
ANT-2
INOUTDVD IN
VIDEO
COLOR
STREAM
INPUT
VIDEO 2 VIDEO 1
MONO
L/MONO
VIDEO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
From Cable
cable converter box
IN OUT
Connecting a cable converter box and VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Change the TV to Video
mode. Tune the VCR to channel 3 or 4 (the same channel as the
converter box output switch). Use the cable converter box to change
channels. Set the PIP source to TV mode (see page 24).
You will need:
• three coaxial cables
• one pair of audio cables (one single cable for a mono VCR)
• one video cable
• one cable splitter
ANT-1 OUT
ANT (75Ω)
ANT-2
INOUTDVD IN
VIDEO
COLOR
STREAM
INPUT
VIDEO 2 VIDEO 1
MONO
L/MONO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
Stereo VCR
VIDEO AUDIO
OUT
IN from ANT
CH 3
CH 4
OUT to TV
LR
IN
TV
VIDEO
cable converter box
IN OUT
cable splitter
IN
OUT
OUT
From Cable
Note:
When you use a converter box with your TV,
there may be features you will not be able to
program using the remote control, such as
such as PIP swap, Channel y z, channel
block, favorite channels, or channel labels.
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have an S-VHS VCR, use the S-video
connections and omit the video cable.
Caution:
Do not connect the video cable and the
S-video cable to Video-1 simultaneously.
4
Reference
Connecting
your TV
Connecting a DVD/satellite receiver and VCR
This connection allows you to watch DVD/satellite, video, or TV
programs. You can record from the DVD/satellite receiver and TV, as
well as record one TV channel while watching another channel.
You will need:
• one coaxial cable
• three pairs of audio cables (one pair and two single cables for a
mono VCR)
• two video cables
• one S-video cable
Stereo VCR
VIDEO AUDIO
OUT
IN from ANT
CH 3
CH 4
OUT to TV
LR
IN
ANT-1 OUT
ANT (75Ω)
ANT-2
INOUTDVD IN
VIDEO
COLOR
STREAM
INPUT
VIDEO 2 VIDEO 1
MONO
L/MONO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
TV
DVD / Satellite Receiver
AUDIO
OUT
VIDEO
OUT
S VIDEO
L
R
To Satellite
Satellite IN
To Antenna
VIDEO
Connecting a DVD with ColorStream™ and a VCR
This connection allows you to watch DVD, video, or TV programs,
and record DVD or TV programs. You can record from one source
and watch a program from another source. Your TV is capable of using
ColorStream (color difference). Connecting your TV to a ColorStream
compatible DVD, such as a Toshiba DVD, can greatly enhance
picture quality and performance.
You will need:
• one coaxial cable
• three pairs of audio cables (one pair and two single cables for a
mono VCR)
• two video cables
• one set of ColorStream video cables
Note:
You can use a video cable instead of the
S-video cable, but the picture quality will
decrease.
If you use an S-video cable between the TV
and DVD/satellite receiver, make the audio
connections only and omit the video
connection.
Caution:
Do not connect the video cable and the
S-video cable to Video-1 simultaneously.
5
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Stereo VCR
VIDEO AUDIO
OUT
IN from ANT
CH 3
CH 4
OUT to TV
LR
IN
ANT-1 OUT
ANT (75Ω)
ANT-2
INOUTDVD IN
VIDEO
COLOR
STREAM
INPUT
VIDEO 2 VIDEO 1
MONO
L/MONO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
TV
DVD Player with ColorStream
TM
AUDIO
OUT
VIDEO
OUT
S VIDEO
L
R
L
R
To Antenna
COLORSTREAM
TM
YCb Cr
VIDEO
Connecting two VCRs
This connection allows you to record from one VCR to another VCR
while watching a video program. You also will be able to record from
one TV channel while watching another channel.
You will need:
• one coaxial cable
• two pairs of audio cables (two single cables for mono VCRs)
• two video cables
Stereo VCR / Playback
VIDEO AUDIO
OUT
IN from ANT
CH 3
CH 4
OUT to TV
LR
IN
Stereo VCR / Recording
VIDEO AUDIO
OUT
IN from ANT
CH 3
CH 4
OUT to TV
LR
IN
ANT-1 OUT
ANT (75Ω)
ANT-2
INOUTDVD IN
VIDEO
COLOR
STREAM
INPUT
VIDEO 2 VIDEO 1
MONO
L/MONO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
TV
To Antenna
VIDEO
Note:
To play from the DVD, the DVD and TV must
use ColorStream connections. To record from
the DVD, the DVD and TV must select Video.
Note:
If you are using an S-VHS VCR, use the
S-video connections and omit the video
cable.
Caution:
Do not connect one VCR to the output and
input jacks on the TV at the same time.
Do not connect the video cable and the
S-video cable to Video-1 simultaneously.
6
Reference
Connecting
your TV
Connecting a camcorder
This connection allows you to watch videos recorded on a camcorder.
You will need:
• one pair of audio cables
• one video cable
Camcorder
AUDIOVIDEO
OUT
L
R
ANT-1 OUT
ANT (75Ω)
ANT-2
INOUTDVD IN
VIDEO
COLOR
STREAM
INPUT
VIDEO 2 VIDEO 1
MONO
L/MONO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
TV Back
VIDEO
Connecting an audio amplifier
This connection allows you to use an audio amplifier to adjust the
audio level. This connection also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier.
You will need:
• one pair of audio cables
ANT-1 OUT
ANT (75Ω)
ANT-2
INOUTDVD IN
VIDEO
COLOR
STREAM
INPUT
VIDEO 2 VIDEO 1
MONO
L/MONO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
TV
Audio Amplifier
To Cable, Cable Box
or Antenna
AUDIO
LR
IN
OUT
VIDEO
Note:
If you are using an S-VHS camcorder with an
S-video output, connect this to the S-video
input on the TV and omit the video cable.
Caution:
Do not connect the video cable and the
S-video cable to Video-1 simultaneously.
AUDIO
MENU TV/VIDEO VOLUME
AUDIOVIDEO
OUT
L
R
TV Front
Camcorder
VIDEO L/MONO R
VIDEO 3
7
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Using the remote control
Preparing the remote control for use
The remote control will operate your TV, most VCR models, and
most cable TV converters together, even if they are different brands. If
you will be using your TV with a Toshiba VCR, your remote control
is already programmed and ready to use. If you own different brands
of VCRs and/or converters, you will need to program your remote
control (see “Programming the remote control for use with a VCR or
cable TV converter” on page 8).
Installing the remote control batteries
To install the batteries:
1. Slide the battery cover off the back of the remote control.
2. Install two “AA” size batteries. Match the + and – symbols on the
batteries to the symbols on the battery compartment.
3. Slide the battery cover back onto the remote control until the
lock snaps.
Using the remote control with a VCR
or cable TV converter
To control a Toshiba VCR:
Set the TV/CABLE/VCR switch to the VCR position. The
shaded buttons in the illustration at right will then control the
VCR. The unshaded buttons will operate the TV as usual.
To control a cable TV converter:
Program the remote control to recognize the brand of your
converter (see “Programming the remote control for use with a
VCR or cable TV converter” on page 8). Set the TV/CABLE/
VCR switch to the CABLE position. The shaded buttons in the
top portion of the illustration at right will then control the cable
TV converter.
Note:
The remote control provided with your TV
may or may not operate certain features on
your VCR, cable TV converter, or other
electronic components. Refer to the owner’s
manuals provided with your other
components to see which features are
available. In addition, the other remote
controls may have buttons not available on
your TV’s remote control. If you would like to
use those features or buttons, you may need
to use the original remote controls for your
other components.
Caution:
• Dispose of batteries in a designated
disposal area. Do not throw batteries
into a fire.
• Do not mix battery types or combine used
batteries with new ones.
• Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartment.
• If you do not intend to use the remote
control for a long time, remove the
batteries.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
Channel
Number
POWER
ENT
ENTER
PLAY PIP
REC
STILL LOCATE SWAP
TV/VCR REW FF
STOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
TV/Cable/VCR
switch
Enter
Play
Stop
Fast Forward
Rewind
TV/VCR
Record
C.CAPT
8
Using the
Remote Control
VCR code table
Brand Code
Adventura 019
Aiko 297
Aiwa 019
Akai 060, 068, 080, 125,
261
American High 054
Asha 259
Audiovox 056
Beaumark 259
Bell & Howell 123
Brandt 206
Broksonic 140, 203, 230, 314,
380
Calix 056
Canon 054
Capehart 039
Carver 100
CCE 091, 297
Citizen 056, 297
Colt 091
Craig 056, 066, 091, 259
Curtis Mathes 054, 060, 079
Cybernex 259
Daewoo 039, 064, 297
Daytron 039
Dynatech 019
Electrohome 056
Electrophonic 056
Emerex 051
Emerson 019, 021, 056, 062,
080, 087, 140, 203,
227, 228, 230, 231,
297, 313, 314, 380,
498
Fisher 066, 073, 085, 123
Fuji 052, 054
Funai 019, 344
Garrard 019, 344
GE 054, 079, 084, 221
Go Video 251, 298
Goldstar 037, 056, 057
Gradiente 019
Harley Davidson 019
Harman/Kardon 057, 094
Harwood 087, 091
Headquarter 065
HI-Q 066
Hitachi 060, 061, 084, 124,
185, 254
Jensen 060
JVC 027, 060, 086
Kenwood 057, 060, 086
Programming the remote control for use
with a VCR or cable TV converter
The remote control provided with your Toshiba TV is preprogrammed
to operate Toshiba VCRs also.
To operate non-Toshiba components using
the remote control provided with your TV:
1. Refer to the VCR and cable TV converter code table below to
find the corresponding code for your VCR or cable TV converter
brand.
If more than one code is listed, try each one separately until you
find the one that works.
2. If you are reprogramming the remote control to operate your:
• VCR: Set the TV/CABLE/VCR switch on the remote control
to VCR.
• Cable TV converter: Set the TV/CABLE/VCR switch on the
remote control to CABLE.
3. Hold down the RECALL button while using the Channel
Number buttons to enter the three-digit code of your VCR or
cable TV converter brand.
4. Point the remote control at the VCR or converter and press
POWER to test the code.
• If the VCR or converter turns on, you have entered the
correct code.
• If the VCR or converter does not respond to the remote
control, you may have entered the incorrect code.
Repeat steps 1–4 using another code.
5. Reset the TV/CABLE/VCR switch to TV to control the TV.
For future reference, write down the codes you used:
VCR code _____________________
Cable TV converter code _____________________
Note:
• Every time you replace the batteries, you
will need to reprogram the remote control.
• Some newer VCRs are capable of working
on either of two remote codes. These
VCRs have a switch labeled “VCR1/VCR2.”
If your VCR has this kind of switch, it may
not respond to any of the codes for your
VCR brand. In this case, set the switch to
the other position (VCR1 or VCR2) and
reprogram the remote control.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
Channel
Number
POWER
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
C.CAPT
Recall
TV/Cable/VCR
switch
9
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
VCR code table (cont.)
Brand Code
KLH 091
Kodak 054, 056
Lloyd 019, 227
Logik 091
LXI 056
Magnavox 054, 058, 100, 129,
168
Magnin 259
Marantz 054, 100
Marta 056
Matsushita 054
MEI 054
Memorex 019, 054, 056, 058,
065, 066, 067, 123,
259
MGA 062, 080
MGN Technology 259
Minolta 061, 124
Mitsubishi 062, 080, 086, 094,
192, 233, 261
Motorola 054, 067
MTC 019, 259
Multitech 019, 091
NAD 077
NEC 057, 059, 060, 069,
086
Nikko 056
Noblex 259
Olympus 054
Optimus 056, 067, 077, 123
Optonica 081
Orion 498
Panasonic 054, 096, 181, 244,
473
Penney 054, 056, 057, 059,
061, 073, 259
Pentax 061, 084, 124
Philco 054
Philips 054, 081, 100, 129
Pilot 056
Pioneer 077, 086
Portland 039
Protec 091
Pulsar 058
Quarter 065
Quartz 065
Quasar 054, 096
Radio Shack 019, 056, 344
Radix 056
Randex 056
RCA 061, 079, 084, 096,
124, 125, 168, 221
Realistic 019, 054, 056, 065,
066, 067, 081, 085,
123, 259
Ricoh 053
Runco 058
Samsung 064, 259
Sanky 058, 067
Sansui 060, 086
Sanyo 065, 066, 123, 259
Scott 062, 064, 140, 203,
229, 230, 231
Sears 054, 056, 061, 065,
066, 073, 085, 123,
124
Sharp 067, 081
Shintom 091
Shogun 259
Singer 091
Sony 051, 052, 053, 054
STS 061
Sylvania 019, 054, 062, 100,
129
Symphonic 019, 344
Tatung 060
Teac 019, 060
Technics 054, 181
Teknika 019, 054, 056, 071
Telefunken 206
TMK 227, 259
Toshiba 062, 064, 085, 229,
231, 385
Totevision 056, 259
Unitech 259
Vector 064
Vector Research 057, 059
Video Concepts 059, 064, 080
Videosonic 259
Wards 019, 054, 061, 066,
067, 081, 091, 168,
231, 259
XR-1000 019, 054, 091
Yamaha 057
Zenith 052, 053, 058
Cable TV converter
code table
Brand Code
ABC 020, 022, 027, 030,
032, 033, 036, 066
Antronix 041
Archer 041, 058, 172
Belcor 075
Cable Star 075
Cabletenna 041
Cableview 041
Century 172
Citizen 172
Colour Voice 044, 050
Comtronics 059, 079
Contec 038
Dae Ryung 027
Eastern 021
Focus 419
Garrard 172
CG Electronics 075
Gemini 034, 089
General Instrument 030, 295
Gold Star 059, 163
Hamlin 028, 039, 053, 278,
292
Hitachi 030
Hytex 026
Jasco 172
Jerrold 022, 030, 031, 033,
034, 066, 295
Macom 052
Magnavox 046
Memorex 019
Movietime 175
NSC 089, 175
Oak 026, 038, 267
Panasonic 019, 040, 126
Paragon 019
Philips 044, 046, 047, 048,
049, 050, 172
Pioneer 042, 163, 552
Popular Mechanics 419
Pulsar 019
RCA 040
Regal 039, 278, 292
Recoton 419
Regency 021
Rembrandt 030, 089
Runco 019
Samsung 059, 163
Scientific Atlanta 025, 027, 036, 296
Signal 034, 059
Signature 030
SL Marx 059
Sprucer 040
Standard
Components 174
Starcom 022, 034, 066
Stargate 034, 059
Starquest 034
Sylvania 020
Teleview 059
Texscan 020
Tocom 031, 032, 078
Toshiba 019
Tusa 034
Unika 041, 172
United Artists 026
United Cable 022
Universal 041, 058, 075, 096,
172, 210
Viewstar 046, 079, 230
Zenith 019
Zentek 419
10
Using the
Remote Control
Learning about the remote control
POWER turns the TV on and off (page 8)
TV/VIDEO selects input source (page 12)
Channel y z cycles through programmed channels
(page 12)
TV/Cable/VCR switch switches between TV, Cable, and VCR
(page 7)
Channel Numbers allow direct access to channels (page 13)
Volume y z adjusts the volume level (page 29)
Channel Return returns to the last viewed channel
(page 13)
MENU allows access to programming menus (page 11)
Favorite Channels y z cycles through channels programmed
as favorite channels (page 14)
ENTER sets programmed menu information (page 13)
EXIT exits programming menus (page 11)
PIP Buttons allow access to PIP functions (pages 24–25)
STILL freezes the small PIP
SOURCE selects the PIP input source
PIP selects the picture-in-picture (PIP) mode
PIP CH yz changes the small PIP channel
LOCATE changes the position of the small PIP
SWAP switches the main picture and small PIP
STOP stops a videotape
REC starts recording a videotape
PLAY plays a videotape
FF fast forwards a videotape
REW rewinds a videotape
TV/VCR toggles between TV and VCR when viewing
while recording
MUTE mutes the sound (page 29)
RECALL displays on-screen information (page 27)
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIP
REC
STILL LOCATE SWAP
TV/VCR REW FF
STOP SOURCE
FAV
FAV
C.CAPT
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Channel
Numbers
Closed
Caption
Enter
Reset
Mute
TV/Cable/VCR
switch
Light
PIP Buttons
Exit
Channel
Return
Menu
PIP Channel
Favorite Channels
Volume
Channel
Timer
POWER
Recall
TV/Video
11
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Setting up your TV
After you have installed the batteries and programmed the remote
control, you will need to use the menu to set some preferences on
your TV. You can access the menu using the buttons on your TV or
remote control.
• When you make a menu selection, your changes occur immediately.
You do not have to press MENU or EXIT to save your changes.
• When you are finished programming the menus, you can press
EXIT to clear the on-screen display, or wait 15 seconds and the
on-screen display will disappear automatically. Your changes are
automatically saved either way.
Changing the on-screen display language
You can choose from three different languages (English, French, and
Spanish) for the on-screen displays. Menus and messages will appear in
the language you select.
To select an on-screen display language:
1. Press MENU.
2. Press
x or • until the SET UP menu appears.
3. Press
y or z to highlight LANGUAGE.
4. Press
x or • to highlight your desired language.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
MOVE SELECT
[ENGLISH]FRANCAIS
ESPANOL
[ANT1]ANT2
[TV]CABLE
[ADD]ERASE
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
LANGUE:
ANT1/2:
TV/CABLE:
PROGRAMME CAN
ADD/EFF:
MORE
BOUGER CHOISIR
ENGLISH[FRANCAIS]
ESPANOL
[ANT1]ANT2
[TV]CABLE
[ADD]EFF
Selecting the antenna input
You can connect to one of two different antenna input sources using
the antenna input (ANT 1 or ANT 2).
To select the antenna input:
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight ANT 1/2.
4. Press
x or • to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
MOVE SELECT
[ENGLISH]FRANCAIS
ESPANOL
[ANT1]ANT2
[TV]CABLE
[ADD]ERASE
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Exit
C.CAPT
TV/Video
MENU TV/VIDEO VOLUME CHANNEL
Menu
TV/Video
12
Setting up
your TV
Using the TV/VIDEO button on the TV
Use the TV/VIDEO button on the TV to monitor or change the signal
source connected to your TV.
To select the signal source:
Press the TV/VIDEO button on the TV to select either VIDEO 1,
VIDEO 2, VIDEO 3, ColorStream, ANT 1, or ANT 2.
Repeatedly press the TV/VIDEO button on the TV until the
signal source you wish to use displays in purple.
TO SELECT PUSH TV/VIDEO
ANT 2
VIDEO 2
COLOR
STREAM
VIDEO 1
ANT 1
VIDEO 3
Adding channels to the TV’s memory
When you press Channel ▲ or ▼ on the TV or remote control,
the TV stops only on the channels stored in the TV’s memory.
Note: To tune the TV to a channel not programmed in the TV’s
memory, use the Channel Number buttons on the remote control.
Follow the steps below and on the next page to program channels into
the TV’s memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in the TV’s memory. After the channels are stored auto-
matically, you can manually add or erase individual channels (see page
13. If you use both ANT-1 and ANT-2 terminals, you will need to
program channels for each input source.
To program channels automatically:
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight TV/CABLE.
4. Press
x or • to highlight either TV or CABLE, depending on
which you use. If you use an antenna, highlight TV. If you use
cable, highlight CABLE.
5. Press
z to highlight CH PROGRAM.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
MOVE SELECT
[ENGLISH]FRANCAIS
ESPANOL
[ANT1]ANT2
[TV]CABLE
[ADD]ERASE
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
MOVE START
[ENGLISH]FRANCAIS
ESPANOL
[ANT1]ANT2
[TV]CABLE
[ADD]ERASE
6. Press x or • to start automatic channel programming. The TV
automatically cycles through every TV or cable channel
(depending on which you selected), and stores all active channels
in the TV’s memory.
7. When automatic channel programming is complete, the message
“CH Programming Completed” appears.
8. Press Channel
▲ or ▼ to view the programmed channels.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Exit
Channel
C.CAPT
TV/Video
Menu
TV/VIDEO VOLUME CHANNEL
TV/Video
MENU
13
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Adding and erasing channels manually
After you have automatically programmed the channels into the TV’s
memory, you can manually add and erase individual channels.
To add a channel to or erase a channel from the TV’s memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the Channel Number
buttons to select the channel.
2. Press MENU.
3. Press
x or • to highlight the SET UP menu.
4. Press
y or z to highlight ADD/ERASE.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
MOVE SELECT
[ENGLISH]FRANCAIS
ESPANOL
[ANT1]ANT2
[TV]CABLE
[ADD]ERASE
5. Press x or • to highlight ADD or ERASE, whichever function
you want to perform.
6. Press ENTER.
7. Press EXIT to return to normal TV viewing.
8. Repeat steps 1–7 for other channels you want to add or erase.
Changing channels
To change to the next programmed channel:
Press Channel
y or z on the TV, or CH y or z on the remote
control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100). Note:For
channels 100 and higher, press the 100 button, then the next
two channel numbers (for example, to select channel 100, press
100–0–0; to select channel 125, press 100–2–5).
Using the TV’s features
Adjusting the channel settings
Switching between two channels
You can switch between two channels without entering an actual
channel number each time.
To switch between two channels:
1. Select the first channel you want to view.
2. Select a second channel using the Channel Number buttons
(0–9 and 100).
3. Press CH RTN. The previous channel will display.
Every time you press CH RTN, the TV will switch back and forth
between the last two channels you tuned the TV to.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
Channel
Number
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Exit
Channel
C.CAPT
TV/VIDEO VOLUME CHANNEL
Menu
MENU
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Channel
Return
Channel
Number
C.CAPT
14
Using the TV’s
Features
Programming your favorite channels
The Favorite Channel feature allows you to use the FAV y z buttons
on the remote control to cycle through your favorite channels and
skip over channels you do not normally watch. You can program a
maximum of 12 favorite channels.
Note: You can still use Channel
▲▼ to cycle through all the channels
you programmed into the TV’s memory.
To program your favorite channels:
1. Tune the TV to a channel you want to program as a favorite
channel.
2. Press MENU.
3. Press
x or • to highlight the SET UP menu.
4. Press
y or z to highlight FAVORITE CH.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER:
DEMO:
MOVE START
0 MIN
[START]STOP
5. Press x or • to display the FAVORITE CH menu. SET/CLEAR
will be highlighted.
6. Press
x or • to highlight SET.
7. Press
z to add the current channel to the list.
8. Press ENTER.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
FAVORITE CH
[SET]CLEAR
2 5 6 11
0 0 0 0
0 0 0 0
[TV:CYAN, CABLE:BLUE]
SELECT SET
9. Press EXIT to close the on-screen display.
10. Repeat steps 1–9 for a maximum of 12 channels.
To select your favorite channels:
Press FAV
y or z on the remote control to cycle through the
favorite channels you programmed.
Note: The Favorite Channel feature will not work unless you
program at least one favorite channel.
To clear a favorite channel:
1. Tune the TV to the channel you want to clear from your favorite
channel list.
2. Press MENU.
3. Press
x or • to highlight the SET UP menu.
4. Press
y or z to highlight FAVORITE CH.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Channel
Number
Exit
Enter
C.CAPT
Channel
Favorite
Channel
15
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
5. Press x or • to display the FAVORITE CH menu. SET/CLEAR
will be highlighted.
6. Press
x or • to highlight CLEAR.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
FAVORITE CH
SET[CLEAR]
2 5 6 0
0 0 0 0
0 0 0 0
[TV:CYAN, CABLE:BLUE]
SELECT CLEAR
7. Press z, which clears the current channel number from the list.
8. Press ENTER.
9. Press EXIT to close the on-screen display.
10. Repeat steps 1–9 for other channels you want to clear from your
favorite channel list.
Using the V-Chip
You can use the V-Chip feature to block certain programs or channels,
thereby preventing others from viewing them.
Selecting a PIN code
Before you can block programs and channels, you need to select a
personal identification number (PIN) code. The PIN code you select
allows you to access the V-Chip menu and prevents others from
changing the rating and blocking limits you set.
To select your PIN code and access the V-Chip menu:
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight V-CHIP CONTROL.
4. Press
x or • to display the Enter PIN Code screen.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER:
DEMO:
MOVE START
0 MIN
[START]STOP
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
– – – –
AUDIO
PREFER
SET UP
C.CAPT
SELECT [0-9] END[EXIT]
PICTURE
5. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, select a
four-digit number to be your PIN code. After the code is entered,
the V-Chip Control menu appears.
6. Press
y or z to highlight ENABLE BLOCKING.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Channel
Number
Exit
Enter
C.CAPT
Channel
Favorite
Channel
16
Using the TV’s
Features
Note:
If you forget your PIN code, follow steps 1–4
under “To change your PIN code” at left, then
press RECALL four times within five seconds.
This allows you to proceed to the
V-Chip Control menu and reset your PIN code.
7. Press x or • to highlight “Y,” which enables all blocking by
activating the V-Chip. See “Blocking programs by ratings” on
page 17, “Blocking unrated movies or programs” on page 19,
and “Blocking channels” on page 20.
(Note: Highlight “N” to deactivate the V-Chip and disable
blocking.)
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
ENABLE BLOCKING [Y]
N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK OFF
MOVE SELECT
[ ]
[ ]
To change your PIN code:
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight V-CHIP CONTROL.
4. Press
x or • to display the Enter PIN Code screen.
5. Use the Channel Number buttons (0–9) to enter your existing
PIN code. After the code is entered, the V-Chip Control menu
appears.
6. Press
y or z to highlight NEW PIN CODE.
7. Press
x or • to display the New PIN Code screen.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
ENABLE BLOCKING [Y]
N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK OFF
MOVE SELECT
[ ]
[ ]
PLEASE ENTER NEW PIN CODE
– – – –
AUDIO
PREFER
SET UP
C.CAPT
SELECT [0-9] END[EXIT]
PICTURE
8. Use the Channel Number buttons (0–9) to enter a new code.
After the new code is entered, the V-Chip Control menu appears.
9. Press EXIT to return to normal TV viewing.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Channel
Number
Exit
Enter
C.CAPT
17
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Blocking programs by ratings
The Motion Picture Association of America (MPAA) uses a rating
system to qualify motion picture content. Television broadcasters
employ a similar rating system to qualify the content of television
programs. The MPAA, Youth TV, and TV ratings work with the
V-Chip feature to allow you to block access to programs that exceed
the rating limits you set.
Ratings definitions
MPAA Ratings
X For adults only.
NC17 Not intended for anyone 17 or under.
R Restricted. Under 17 requires an accompanying parent or adult
guardian.
PG13 Parents strongly cautioned. Some material may not be appropriate
for children under 13.
PG Parental guidance suggested. Some material may not be appropri-
ate for children.
G General audience. Appropriate for all ages.
Youth TV Ratings
Y7, Y7FV Directed to older children. Programs rated Y7 are designed for
children 7 and above. Programs in which fantasy violence may be
more intense or combative than other programs in this category
are rated Y7FV.
Y For all children. Programs rated Y are designed to be appropriate
for all children.
TV Ratings
MA Mature audience only. This program is specifically designed to be
viewed by adults and therefore may be unsuitable for children
under 17.
Language Crude or indecent language.
Sex Explicit sexual activity.
Violence Graphic violence.
14 Parents strongly cautioned. This program contains some material
that many parents would find unsuitable for children under 14
years of age.
Dialog Intensely suggestive dialog.
Language Strong, coarse language.
Sex Intense sexual situations.
Violence Intense violence.
PG Parental guidance suggested. This program contains material that
parents may find unsuitable for younger children.
Dialog Some suggestive dialog.
Language Infrequent coarse language.
Sex Some sexual situations.
Violence Moderate violence
G General audience. Most parents would find this program suitable
for all ages.
No DLSV Programs without any Dialog, Language, Sex, or
Violence ratings.
Note:
Press RECALL to see the rating of the program
you are viewing.
18
Using the TV’s
Features
Note:
Not all programs are rated. To block programs
or movies that are unrated, see “Blocking
unrated movies and programs” on page 19.
To use the V-Chip to block programs by rating:
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press y or z to highlight V-CHIP CONTROL.
4. Press
x or • to display the Enter PIN Code screen.
5. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, select a
four-digit number to be your PIN code. After the code is entered,
the V-Chip Control menu appears.
6. Press
y or z to highlight ENABLE BLOCKING.
7. Press
x or • to highlight “Y,” which enables all blocking by
activating the V-Chip.
(Note: Highlight “N” to deactivate the V-Chip and disable
blocking.)
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
ENABLE BLOCKING [Y]
N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK OFF
MOVE SELECT
[ ]
[ ]
8. Press y or z to highlight SET RATING.
9. Press x or • to display the Set Rating menu.
10. Press
y or z to highlight MPAA Rating, Youth TV Rating, or
TV Rating.
11. Press
• to select (or x to deselect) the ratings to be blocked.
Blocked ratings are signified with the symbol “x.” Unblocked
ratings are signified with the symbol “✔.” As you block ratings,
all ratings higher than the ones you select are blocked as well.
For example, if you block the MPAA rating R, the higher ratings
NC17 and X will also be blocked.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
MPAA RATING:
XNC17RPG13PGG
xx
YOUTH TV RATING:
Y7FVY7Y
TV RATING
MOVE SELECT
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
TV RATING: M A 14PG G
DIALOG: x
LANGUAGE:
SEX:
VIOLENCE:
NO DLSV:
BACK TO V-CHIP MENU
MOVE SELECT
12. When you finish selecting the ratings to be blocked:
• To return to the V-Chip menu, press
y or z to highlight
BACK TO V-CHIP MENU, then press
x or •.
• To return to normal TV viewing, press EXIT.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Channel
Number
Exit
Enter
C.CAPT
19
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Note: When you try to view a program with a ratings block, a message
appears stating that the program has been blocked because the
program’s rating exceeds the set limits. To temporarily override the
block and view the program, press MUTE and enter your PIN code.
To reset your original ratings blocks, turn the TV off and then on
again.
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
TO TEMPORARILY UN-BLOCK
– – – –
SELECT [0-9] END[EXIT]
THIS PROGRAM HAS BEEN BLOCKED
TV-PG L V
EXCEEDS SET LIMITS
PUSH MUTE TO ENTER PIN
Blocking unrated movies and programs
Some movies and programs are not rated. You can use the V-Chip to
block unrated movies and programs.
To block unrated movies and programs:
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight V-CHIP CONTROL.
4. Press
x or • to display the Enter PIN Code screen.
5. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, select a
four-digit number to be your PIN code. After the PIN code is
entered, the V-Chip Control menu appears.
6. Press
y or z to highlight ENABLE BLOCKING.
7. Press
x or • to highlight “Y,” which enables all blocking by
activating the V-Chip.
(Note: Highlight “N” to deactivate the V-Chip and disable
blocking.)
8. Press
y or z to highlight SET BLOCKING OPTIONS.
9. Press
x or • to display the unrated movie/program blocking
menu.
10. Press
y or z to highlight BLOCK TV NONE RATING.
11. Press
x or • to highlight “Y” to block movies/programs rated
“TV None.” (Note: Highlight “N” to unblock unrated programs.)
12. Press EXIT to return to normal TV viewing.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
ENABLE BLOCKING [Y]
N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK OFF
MOVE SELECT
[ ]
[ ]
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
BLOCK MPAA UNRATED: [Y]
N
BLOCK TV NONE RATING: [Y]
N
BACK TO V-CHIP MENU
NOTICE: ENABLING THIS OPTION
MAY BLOCK EMERGENCY
MESSAGES
MOVE SELECT
[ ]
[ ]
Caution:
Blocking unrated television programs (with a
rating of “TV NONE”) may block emergency
messages.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Channel
Number
Exit
Enter
C.CAPT
20
Using the TV’s
Features
Blocking channels
You can block a maximum of four TV channels and four cable
channels. Blocked channels cannot be viewed regardless of their
ratings. If you try to display a blocked channel, the TV will display the
nearest unblocked channel.
To block a channel:
1. Tune the TV to the channel you want to block.
2. Press MENU.
3. Press
x or • to highlight the SET UP menu.
4. Press
y or z to highlight V-CHIP CONTROL.
5. Press
x or • to display the Enter PIN Code screen.
6. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, choose a
four-digit number to be your PIN code. After entering the code,
the V-Chip Control menu appears.
7. Press
y or z to highlight ENABLE BLOCKING.
8. Press
x or • to highlight “Y,” which enables all blocking by
activating the V-Chip.
(Note: Highlight “N” to deactivate the V-Chip and disable
blocking.)
9. Press
y or z to highlight BLOCK CHANNEL.
10. Press
x or • to display the BLOCK CHANNEL menu.
SET/CLEAR will be highlighted.
11. Press
x or • to highlight SET.
12. Press
z to add the current channel to the list.
13. Press ENTER.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
BLOCK CHANNEL
[SET]CLEAR
0 0 0 6
SELECT CLEAR
END[EXIT]
14. Press EXIT.
15. Repeat steps 1–14 to block additional channels.
To unblock all blocked channels:
Note: This will unblock every channel you have blocked. You cannot
unblock individual channels.
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight V-CHIP CONTROL.
4. Press
x or • to display the Enter PIN Code screen.
5. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, choose a
four-digit number to be your PIN code. After entering the code,
the V-Chip Control menu appears.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Channel
Number
Exit
Enter
C.CAPT
Note:
After programming CHANNEL BLOCK,
change channels before turning off the
television.
21
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
6. Press y or z to highlight BLOCK CHANNEL.
7. Press
x or • to display the BLOCK CHANNEL menu.
SET/CLEAR will be highlighted.
8. Press
x or • to highlight CLEAR.
9. Press
z to clear all blocked channels from the list.
10. Press ENTER.
11. Press EXIT to return to normal TV viewing.
Video Lock
You can use the Video Lock feature to block the input sources
(Video 1, Video 2, Video 3, and ColorStream) and channels 3 and 4.
Note: The Video Lock feature is independent of the Enable Blocking
option of V-Chip control.
The Video Lock options are:
Video: Blocks Video 1, Video 2, Video 3, and ColorStream.
Video+: Blocks Video 1, Video 2, Video 3, ColorStream, and
channels 3 and 4.
Off: Disables the Video Lock feature.
To set up video lock:
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight V-CHIP CONTROL.
4. Press
x or • to display the Enter PIN Code screen.
5. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, choose a
four-digit number to be your PIN code. After entering the code,
the V-Chip Control menu appears.
6. Press
y or z to highlight VIDEO LOCK.
7. Press
x or • to select the desired level of video locking (Video,
Video+, or Off).
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
ENABLE BLOCKING [Y]
N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK VIDEO VIDEO+[OFF]
MOVE SELECT
8. Press EXIT to return to normal TV viewing.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Channel
Number
Exit
Enter
C.CAPT
Note:
In normal TV viewing, if you cannot access the
input sources (Video 1, Video 2, Video 3, and
ColorStream) or channels 3 and 4, check the
Video Lock setting and highlight OFF if
necessary.
22
Using the TV’s
Features
Channel labels
A channel label displays on the screen above the channel number
every time you turn the TV on, change the channel, or press
RECALL. You can choose up to four characters for a channel label.
To create a channel label:
1. Tune the TV to the channel you want to label.
2. Press MENU.
3. Press
x or • to highlight the SET UP menu.
4. Press
y or z to highlight CH LABEL.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ]
[ ]
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER:
DEMO:
MOVE START
0 MIN
[START]STOP
5. Press x or • to display the CH LABEL menu. SET/CLEAR will
be highlighted.
6. Press
x or • to highlight SET.
7. Press
z to highlight LABEL.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ][ ]
CH LABEL
SET/CLEAR [SET]CLEAR
LABEL - - - -
SET UP MENU
MOVE SELECT
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ][ ]
CH LABEL
SET/CLEAR [SET]CLEAR
LABEL Z - - -
SET UP MENU
MOVE SELECT
8. Press x or • repeatedly to scan through the list of available
characters until the desired character appears in the first space.
9. Press ENTER.
10. Repeat steps 8 and 9 to enter the rest of the characters.
Note: For a blank space in the label name, you need to choose an
empty space from the list of characters; otherwise, a dash will
appear in the space.
11. Press EXIT to return to normal TV viewing.
12. Repeat steps 1–11 for other channels. You can assign labels to a
maximum of 32 channels.
To erase a channel label:
1. Select the channel whose label you want to erase.
2. Press MENU.
3. Press
x or • to highlight the SET UP menu.
4. Press
y or z to highlight CH LABEL.
5. Press
x or • to display the CH LABEL menu. SET/CLEAR will
be highlighted.
6. Press
x or • to highlight CLEAR.
7. Press ENTER.
8. Press EXIT to return to normal TV viewing.
9. Repeat steps 1–8 to erase other channel labels.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Channel
Number
Exit
Enter
C.CAPT
23
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Video labels
The Video Label feature allows you to label each input source for your
TV from the following preset list of labels:
–: Uses the default label name
VCR: Video cassette recorder
DVD: Digital video disc or digital versatile disc
DTV: Digital TV set-top box
SAT: Satellite box
CBL: Cable box
To set up video labels:
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight VIDEO LABEL.
4. Press
x or • to display the Video Label screen.
5. Press
y or z to highlight the input source to be labeled.
6. Press
x or • to select the desired label for that input source.
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
[ ][ ]
VIDEO LABEL
VIDEO1 – VCR DVD DTV[SAT]CBL
VIDEO2 –
VIDEO3 –
ColorStream –
SET UP MENU
MOVE SELECT
7. Repeat steps 1–6 to label the other input sources.
8. When you finish setting up video labels:
• To return to the previous menu, press
y or z to highlight
SET UP MENU, then press
x or •.
• To return to normal TV viewing, press EXIT.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Channel
Number
Exit
Enter
C.CAPT
24
Using the TV’s
Features
Watching picture-in-picture (PIP)
The picture-in-picture (PIP) feature allows you to watch two pictures
at the same time. The small picture can come from a TV broadcast or
an external source, such as a VCR.
(Note: ColorStream cannot be accessed in PIP mode.)
To display a TV broadcast as a small picture:
1. Tune the TV to the program you want to watch.
2. Press the PIP button once to display a small picture. A window
1/9 the size of the screen will appear. Press PIP a second time to
display a 1/16-size window.
7
1/9
PIP
1/16
3. Press PIP Channel y or z to choose the program you want to
display as a small picture.
To display a picture from an external source as a small picture:
1. Make sure you have connected the external source equipment
properly. For more information, see “Connecting your TV” on
page 2.
2. Turn on the TV and select the program you want to watch.
3. Press the PIP button once to display a small picture. A window
1/9 the size of the screen will appear. Press PIP a second time to
display a 1/16-size window.
4. Press SOURCE to select the input source (TV, VIDEO 1,
VIDEO 2, or VIDEO 3) for the small picture. The selected
source will be displayed in purple.
TO SELECT PUSH SOURCE
PIP
TV
VIDEO1
VIDEO2
VIDEO3
To turn PIP off:
Press PIP two or threee times, depending on the size of the small
picture screen you selected.
Switching the main and small pictures
With the TV in PIP mode, press SWAP to switch the main and small
pictures. The main and small pictures switch every time you press the
SWAP button.
Note:
PIP cannot be turned on when the
ColorStream input is being viewed.
You cannot display the signal sources input
through the ANT-2 terminal as a small picture.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIP
REC
STILL LOCATE SWAP
TV/VCR REW FF
STOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
PIP Channel
PIP
Source
Swap
Locate
Still
C.CAPT
Channel
25
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Changing the position of the small picture
With the TV in PIP mode, press LOCATE to change the display
position of the small picture. Every time you press LOCATE, the
small picture display changes position in a counter-clockwise manner.
Freezing the small picture
With the TV in PIP mode, press STILL to freeze the small picture.
The small picture becomes a still picture (outlined in red in the on-
screen display). Press STILL again to return to the moving picture
(outlined in green in the on-screen display).
Still
Watching multi-window PIP
Multi-window PIP appears as six small boxes across the bottom of the
screen. Multi-window PIP cannot be viewed unless channels are
programmed into the TV’s memory (see “Adding channels to the TV’s
memory” on page 12).
Note: The LOCATE, SWAP, PIP CH
yz, SOURCE, and STILL
buttons do not work in Multi-window PIP mode.
To view multi-window PIP:
Press PIP three times.
The TV cycles through the programmed channels and shows a few
seconds of each channel’s programming, then freezes the image and
moves on to the next channel in a continuous cycle. The channel
number appears above each small PIP window.
A
14 23 27 30 43 56
To turn multi-window PIP off:
Press PIP again or change the channel.
Note:
Multi-window PIP shows channels
programmed for the signal source you are
currently viewing (ANT-1 or Cable).
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIP
REC
STILL LOCATE SWAP
TV/VCR REW FF
STOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
PIP Channel
PIP
Source
Swap
Locate
Still
C.CAPT
Channel
26
Using the TV’s
Features
Adjusting the picture
Adjusting the picture quality
You can adjust the picture quality to your personal preferences,
including the contrast, brightness, sharpness, color, and tint. Your
picture quality adjustments are stored automatically in the TV’s
memory. You can keep these settings or choose preset options under
the PREFERENCES menu. (See “Selecting the color temperature”
below, and “Adjusting the picture preference” on the following page.)
To adjust the picture quality:
1. Press MENU.
2. Press
x or • to highlight the PICTURE menu.
3. Press
y or z until the quality you want to adjust is highlighted.
PICTUREPICTURE AUDIO
PREFER
SET UP
C.CAPT
CONTRAST –
BRIGHTNESS –
SHARPNESS –
COLOR –
TINT–
RESET
MOVE ADJUST
[ ]
[ ]
4. Press x or • to adjust the level.
Selection Pressing
Contrast Lower Higher
Brightness Darker Lighter
Sharpness Softer Sharper
Color Paler Deeper
Tint Reddish Greenish
Selecting the color temperature
You can change the quality of the picture by selecting from three
preset color temperatures: cool, medium, and warm.
Mode Picture Quality
Cool Blueish
Medium Neutral
Warm Reddish
To select the color temperature:
1. Press MENU.
2. Press
x or • to highlight the Preferences (“PREFER”) menu.
3. Press
y or z to highlight COLOR TEMPERATURE.
4. Press
x or • to highlight the mode you prefer.
TV/VIDEO VOLUME CHANNEL
Menu
MENU
TV/Video
Note:
To reset the picture adjustments to the factory
settings, select RESET from the PICTURE
menu.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
C.CAPT
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Reset
Exit
27
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Adjusting the picture preference
You can select your desired picture type from four picture modes:
Sports, Standard, Movie, and Memory, as described in the following
table:
Mode Picture Quality
Sports Bright and dynamic picture (factory-set)
Standard Standard picture quality (factory-set)
Movie Movie-like picture setting (factory-set)
Memory Your personal preferences (set by you; see
“Adjusting the picture quality” on page 26.)
To select your picture preference:
1. Press MENU.
2. Press
x or • to highlight the Preferences (“PREFER”) menu.
3. Press
y or z to highlight PICTURE PREFERENCES.
4. Press
x or • to highlight the mode you prefer.
Watching video input
Press the TV/VIDEO button on the remote control or TV to view a
signal coming from other devices connected to your TV, such as a
VCR or video disc player (see “Connecting your TV” on page 2).
Displaying on-screen information
Press RECALL to display the following on-screen information:
• Antenna mode (when in TV mode)
• Channel number or video mode
• Channel label (if set)
• Audio status (stereo or SAP)
• Rating of current program (if rated)
Setting the off-timer
You can set the off-timer to turn the TV off automatically.
To set the off-timer:
1. Press TIMER.
2. Press
• to increase and x to decrease the off time in 10-minute
increments to a maximum of 180.
3. Press EXIT to exit the menu and return to normal TV viewing.
To cancel the off-timer:
Set the off-timer to 0 (zero) minutes, or turn the TV off and then
on again.
Auto power off
The TV turns itself off automatically after approximately 15 minutes if
it is tuned to a vacant channel or a station that stops broadcasting for
the day.
Note: This feature does not work in Video mode.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
Recall
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
TV/Video
C.CAPT
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Timer
Channel
Number
C.CAPT
Exit
Menu
POWER
TV/VIDEO VOLUME CHANNEL
Menu
MENU
TV/Video
28
Using the TV’s
Features
Using the closed caption feature
The Closed Caption feature has two options:
• Captions—An on-screen display of the dialogue, narration, and
sound effects of programs and videos that are closed-captioned
(usually identified in your local TV listing as “CC”).
• Text—An on-screen display of information not related to the
program, such as weather or stock data (if available in your
viewing area).
To view captions or text:
1. Tune the TV to the desired program or video.
2. Press MENU.
3. Press
x or • to highlight the C.CAPT menu.
4. Press
y or z to highlight CC.
[ ]
[ ]
CC:
C1 C2 C3 C4 T1
T2 T3 T4 OFF
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
MOVE SELECT
5. Press x or • to select the desired Closed Caption mode, as
follows:
• To view captions, select C1, C2, C3, or C4 (C1 displays
translation of the primary language in your area). Note: If the
program or video you selected is not closed-captioned, no
captions will display on the screen.
The top of the mountain is covered
with snow all the year round.
• To view text, select T1, T2, T3, or T4. Note: If text is not
available in your viewing area, a black rectangle may appear on
your screen. If this occurs, turn the Closed Caption feature off.
WORLD WEATHER
LONDON
MOSCOW
PARIS
ROME
TOKYO
Temps
F
51
57
53
66
65
C
11
14
12
19
18
Current
Weather
Clear
Cloudy
Clear
Cloudy
Rain
• To turn the Closed Caption feature off, highlight OFF in the
Closed Caption menu.
Note:
A closed caption signal may not display in the
following situations:
• When a videotape has been dubbed
• When the signal reception is weak
• When the signal reception is non-
standard
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Closed
Captioning
C.CAPT
29
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Adjusting the sound
Muting the sound
Press MUTE to temporarily turn the sound off. While the sound is off,
the screen displays the word MUTE in the lower right corner. To
restore the sound, press MUTE or VOL
y z.
When you press the MUTE button, the Closed Caption feature is
automatically activated. To deactivate captions, press the MUTE
button again. This feature works only when the Closed Caption mode
is set to OFF. See “Using the closed captioned feature” on page 28 for
more information about closed caption settings.
Selecting stereo/SAP broadcasts
Use the multi-channel TV sound (MTS) feature to listen to high-
fidelity stereo sound while watching TV. MTS also can transmit a
second audio program (SAP) containing a second language or other
audio information. Note: The MTS feature is not available in Video
mode.
In general, you can leave your TV in Stereo mode because the TV
automatically outputs either stereo or monaural (“mono”) sound,
depending on the broadcast type. If the stereo sound is noisy, select
MONO to reduce the noise.
When the TV receives a stereo or SAP broadcast, the word “STEREO”
or “SAP” displays on the screen every time you turn the TV on,
change the channel, or press RECALL.
To listen to stereo sound:
1. Press MENU.
2. Press
x or • to highlight the AUDIO menu.
3. Press
y or z to highlight MTS.
4. Press
x or • to highlight STR (stereo). The STR and SAP menu
items display in yellow when the TV receives the signal (if
available), and in purple when the feature is selected.
PICTUREPICTURE AUDIO
PREFER
SET UP
C.CAPT
[ ]
[ ]
MTS: [STR]SAP MONO
BASS–
+
TREBLE –
+
BALANCE –
+
SURROUND: [ON]OFF
SBS: [ON]OFF
SBS LEVEL –
+
MOVE SELECT
To listen to a second audio program:
1. Press MENU.
2. Press
x or • to highlight the AUDIO menu.
3. Press
y or z to highlight MTS.
4. Press
x or • to highlight SAP. The TV speakers will output only
the second audio program.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
Exit
C.CAPT
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Mute
C.CAPT
Volume
Recall
30
Using the TV’s
Features
Adjusting the sound quality
You can change the sound quality of your TV by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press MENU.
2. Press
x or • to highlight the AUDIO menu.
3. Press
y or z to highlight the quality you want to adjust.
4. Press
x or • to adjust the level:
•
x makes the sound quality weaker or decreases the balance in
the right channel, depending on the item selected.
• • makes the sound quality stronger or decreases the balance in
the left channel, depending on the item selected.
PICTUREPICTURE AUDIO
PREFER
SET UP
C.CAPT
[ ]
[ ]
MTS: [STR]SAP MONO
BASS –
+
TREBLE –
+
BALANCE –
+
SURROUND: [ON]OFF
SBS: [ON]OFF
SBS LEVEL –
+
MOVE ADJUST
Using the surround sound feature
The surround sound feature expands the audio listening field wider and
deeper to create exceptional sound quality from the TV speakers.
This feature uses stereo signals from a TV broadcast or video input.
To turn the surround sound feature on:
1. If you have not already done so, select Stereo mode (see “Select-
ing stereo/SAP broadcasts” on the previous page).
2. Press MENU.
3. Press
x or • to highlight the AUDIO menu.
4. Press y or z to highlight SURROUND.
5. Press
x or • to highlight ON.
PICTUREPICTURE AUDIO
PREFER
SET UP
C.CAPT
[ ]
[ ]
MTS: [STR]SAP MONO
BASS–
+
TREBLE –
+
BALANCE –
+
SURROUND: [ON]OFF
SBS: [ON]OFF
SBS LEVEL –
+
MOVE SELECT
To turn the surround sound feature off:
Highlight OFF in step 5 above. Note: In general, you can leave the
surround sound feature on because it automatically outputs surround
stereo or monaural sound, depending on the broadcast or video type.
Note:
To reset the audio adjustments to the
factory settings, select RESET from the
PICTURE menu.
TV/VIDEO VOLUME CHANNEL
Menu
MENU
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
C.CAPT
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
31
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Using the sub-bass system (SBS)
The sub-base system (SBS) allows you to enhance bass performance,
even when the volume is low.
To turn the sub-bass system on [or off]:
1. Press MENU.
2. Press
x or • to highlight the AUDIO menu.
3. Press
y or z to highlight SBS.
4. Press
x or • to highlight ON [or OFF].
PICTUREPICTURE AUDIO
PREFER
SET UP
C.CAPT
[ ]
[ ]
MTS: [STR]SAP MONO
BASS–
+
TREBLE –
+
BALANCE –
+
SURROUND: [ON]OFF
SBS: [ON]OFF
SBS LEVEL –
+
MOVE SELECT
To adjust the sub-bass system:
1. Turn the sub-bass system on, as instructed above.
2. Press MENU.
3. Press
x or • to highlight the AUDIO menu.
4. Press
y or z to highlight SBS LEVEL.
5. Press
x or • to adjust the SBS level.
PICTUREPICTURE AUDIO
PREFER
SET UP
C.CAPT
[ ]
[ ]
MTS: [STR]SAP MONO
BASS–
+
TREBLE –
+
BALANCE –
+
SURROUND: [ON]OFF
SBS: [ON]OFF
SBS LEVEL –
+
MOVE ADJUST
Viewing the demonstration (DEMO) mode
The demonstration (DEMO) mode is an option available on the
SET UP menu that will demonstrate several features of your TV.
To start the demonstration mode:
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight DEMO.
4. Press
x or • to start the demo.
To stop the demonstration mode:
Press RECALL, EXIT, or POWER.
Understanding the last mode memory feature
If the power is cut off while you are viewing the TV, the Last Mode
Memory feature turns the TV on automatically when the power is
resupplied.
If the power is going to be off for a long time and you are going to be
away from your TV, unplug the power cord to prevent the TV from
turning on in your absence.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
Recall
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
POWER
C.CAPT
Exit
TV/VIDEO VOLUME CHANNEL
Menu
MENU
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIPSTOP SOURCE
FAV
FAV
C.CAPT
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
Menu
32
Reference
Appendix
Appendix
Cleaning and care
WARNING: TV sets use high voltage. Do not remove the cabinet back.
Refer all servicing to qualified service technicians.
To clean the TV screen and cabinet:
1. Unplug the power cord to avoid possible shock hazard.
2. Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water
to clean the TV screen and trim. Do not use too much water; liquid spilling into the cabinet can damage
the TV.
3. Wipe off excess moisture with a clean dry cloth.
4. Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution:
Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.
These chemicals can damage the cabinet’s finish.
Troubleshooting
Before calling a service technician, please check the following table for possible causes of the problem and
some solutions.
Problem Solution
TV will not turn on • Make sure the power cord is plugged in, then press POWER.
• The remote control batteries may be dead. Replace the batteries or
press the POWER button on the TV.
No picture, no sound • Check the antenna/cable connections.
No sound, picture OK • The sound may be muted. Press MUTE or VOL
y z.
• The station may have broadcast difficulties. Try another channel.
Poor sound, picture OK • The station may have broadcast difficulties. Try another channel.
Poor picture, sound OK • Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• Adjust the PICTURE menu.
Poor reception of broadcast channels • The station may have broadcast difficulties. Try another channel.
• Check the antenna connections.
• If you are using a VCR, make sure the TV/VCR button is set
correctly.
Cannot receive above channel 13 • Make sure TV/CABLE is set to TV mode.
Unable to select a certain channel • The channel may be locked out with the channel lock feature, or
erased with the add/erase feature.
Multiple images • The station may have broadcast difficulties. Try another channel.
• Use a highly directional outdoor antenna.
33
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
Poor color or no color • The station may have broadcast difficulties. Try another channel.
• Adjust the TINT and/or COLOR in the PICTURE menu.
• If you change the direction of the TV while it is turned on, the
picture could suffer from color shading. If so, turn the TV off and
allow it to cool down for several hours before turning it on again.
No stereo or SAP sound from a • Make sure the MTS feature is set properly.
known MTS broadcast
The remote control does not operate • Check that the TV/CABLE/VCR switch is properly set.
• There may be an obstruction between the remote control and the
remote control sensor.
• The remote control batteries may be dead. Replace the batteries.
The V-Chip PIN code does not work • Change or reset your PIN code.
Specifications
Television system NTSC standard
Channel coverage VHF: 2 through 13
UHF: 14 through 69
Cable TV: Mid band (A-8 through A-1, A through 1)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 125)
Power source 120 AC, 60 Hz
Power consumption 32AX60: 105 W; 36AX60: 105 W
Audio power 5 W + 5 W
Speaker type 2-3/8 x 4-3/4 inches (60 x 120 mm)
Video/Audio terminals S-VIDEO INPUT
Y-INPUT: 1 V (p-p), 75 ohm, negative sync.
C-INPUT: 0.286 V (p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT
VIDEO: 1 V (p-p), 75 ohm, negative sync.
AUDIO: 150 mV (rms) (30% modulation equivalent, 47 k ohm)
VIDEO/AUDIO OUTPUT
VIDEO: 1 V (p-p), 75 ohm, negative sync.
AUDIO: 150 mV (rms) (30% modulation equivalent, 47 k ohm)
Dimensions
32AX60: 36AX60:
Width: 30-5/8 inches (778 mm) 34-9/16 inches (878 mm)
Height: 27-5/16 inches (694 mm) 30-1/2 inches (775 mm)
Depth: 22-11/16 inches (576 mm) 25-3/4 inches (654 mm)
Weight 32AX60: 123 lbs. (55.8 kg); 36AX60: 158 lbs. (71.7 kg)
Supplied accessories Remote control with two size “AA” batteries
Optional TV stand 32AX60: ST-3230; 36AX60: ST-3615, ST-3640
Design and specifications are subject to change without notice.
34
Reference
Appendix
Limited United States warranty
Toshiba America Consumer Products, Inc. (“TACP”) and Toshiba Hawaii Inc. (“THI”) make the following
limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving
this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
Limited one-year warranty
TACP and THI warrant this product and its parts against defects in materials or workmanship for a period of
one (1) year after the date of original retail purchase. During this period, TACP and THI will repair or replace a
defective part, at their option, with a new or refurbished part, at no cost to you. Authorized TACP/THI service
station personnel will come to your home when warranty service is required. Depending on the type of repair
required, either the service will be performed in your home or the set will be taken to the authorized TACP/THI
service station for repair and returned to your home at no cost to you.
Limited two-year warranty of picture tube
TACP and THI further warrant the picture tube in this product against defects in materials or workmanship for
a period of two (2) years after the date of original retail purchase. During this period, TACP and THI will repair
or replace a defective picture tube at their option, with a new or refurbished picture tube, at no cost to you,
except that, if a defective picture tube is replaced after one (1) year from the date of the original retail purchase,
you pay labor charges involved in the replacement.
Rental units
The warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the
rental firm, whichever comes first.
Commercial units
Products sold and used for commercial use have a limited ninety (90) day warranty for the picture tube and all
parts and labor.
Owner’s manual and registration card
You should read this owner’s manual thoroughly before operating this product. Complete and mail the enclosed
registration card within ten days after you, or the person who has given you this product as a gift, purchased this
product. This is one way to enable TACP/THI to provide you with better customer service and improved
products. Failure to return the registration card will not affect your rights under this warranty.
Your responsibility
The above warranties are subject to the following conditions:
• You must retain your bill of sale or provide other proof of purchase.
• All warranty servicing of this product must be made by an Authorized TACP/THI Service Station.
• These warranties are effective only if the product is purchased and operated in the U.S.A. or Puerto Rico.
• Labor service charges for set installation, setup, adjustment of customer controls, and installation or repair of
antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems
are your responsibility.
• Warranties extend only to defects in materials or workmanship as limited above, and do not extend to any
product or parts that have been lost or discarded by you; to damage to products or parts caused by misuse,
accident, Acts of God (such as lightning), fluctuations in electric power, improper installation, improper
maintenance, or use in violation of instructions furnished by us; or to units that have been modified or had
the serial number removed, altered, defaced, or rendered illegible.
How to obtain warranty service
If, after following all operating instructions in this manual and checking the section “Troubleshooting,” you find
a that service is needed because of a defective product or part, call the TACP toll-free number 1-800-631-3811
to locate the nearest Toshiba Authorized Service Station. Please present your bill of sale or other proof to the
authorized service personnel.
35
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
In the Continental U.S.
If your TV requires service, call toll free:
1-800-631-3811
Toll Free
1-800-631-3811
In Hawaii
If your TV requires service, call:
(808) 591-8377
327 Kamakee Street, Honolulu, HI 96814
Limitations
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particu-
lar purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of
any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other
warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or
replacement of any parts. In no event shall TACP or THI be liable for consequential or incidental damages.
No person, agent, distributor, dealer, or company is authorized to change, modify, or extend the terms of these
warranties in any manner whatsoever. The time within which action must be commenced to enforce any obliga-
tion of TACP or THI arising under this warranty or under any statute or law of the United States or any state
thereof is hereby limited to 90 days from the date you discover or should have discovered the defect. This
limitation does not apply to implied warranties arising under state law.
This warranty gives you specific legal rights. You also may have other rights, which may vary from state to state.
Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or
the exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you.
Attention Canadian customers
Canadian consumers are requested to complete the special Canadian “Warranty Registration
Form” enclosed, and forward this completed form with a copy of the bill of sale to
TOSHIBA OF CANADA to “Register and Validate” their warranty.
Products purchased in the U.S.A. and used in Canada are not covered by these warranties.
Products purchased in Canada and used in the U.S.A. are not covered by these warranties.
36
Reference
Index
Index
A
adding and erasing channels manually .....................13
adding channels to the TV’s memory..........................12
adjusting
channel settings..............................................................13
picture preference..........................................................27
picture quality ..................................................................26
sound...................................................................................29
antenna input, selecting...................................................11
audio amplifier, connecting...............................................6
auto power off ......................................................................27
B
batteries, installing in the remote control ...................7
blocking
channels.............................................................................20
programs by ratings ......................................................17
unrated movies and programs..................................19
C
cable converter box and VCR, connecting .................3
cable converter box, connecting.....................................3
cable TV converter code table .........................................9
camcorder, connecting .......................................................6
care and cleaning of your TV .........................................32
changing
channels.............................................................................13
on-screen display language.......................................11
position of the small picture (PIP) ...........................25
channel settings, adjusting .............................................13
channels
adding and erasing manually ....................................13
adding to the TV’s memory ........................................12
blocking with V-Chip.....................................................20
changing ............................................................................13
favorite, programming ..................................................14
labels ...................................................................................22
programming automatically .......................................12
switching between two ................................................13
cleaning and care of your TV .........................................32
closed caption feature, using .........................................28
code table
cable TV converter...........................................................9
VCR ........................................................................................8
ColorStream™ DVD and VCR, connecting ..................4
color temperature, selecting...........................................26
connecting
audio amplifier...................................................................6
cable converter box.........................................................3
cable converter box and VCR......................................3
camcorder ........................................................................... 6
DVD with ColorStream™ and a VCR......................... 4
DVD/satellite receiver and VCR .................................4
TV............................................................................................2
VCR ........................................................................................2
VCRs, two ............................................................................5
D
demonstration (DEMO) mode, viewing..................... 31
displaying on-screen information.................................27
DVD with ColorStream and a VCR, connecting........ 4
DVD/satellite receiver and VCR, connecting ............. 4
F
favorite channels, programming ...................................14
freezing the small picture (PIP).....................................25
L
labels
channel...............................................................................22
video ....................................................................................23
language, changing the on-screen display ..............11
last mode memory feature, understanding.............. 31
location for TV, selecting.................................................... 1
M
MPAA ratings........................................................................17
multi-window PIP ................................................................25
muting the sound ................................................................29
O
off-timer, setting ..................................................................27
on-screen display language, changing ......................11
on-screen information, displaying................................27
P
picture
adjusting ............................................................................26
color temperature, selecting ......................................26
preference, adjusting ....................................................27
quality, adjusting.............................................................26
37
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
picture-in-picture (PIP)
changing the position of the small picture ..........25
freezing the small picture............................................25
main and small pictures, switching.........................24
watching.............................................................................24
watching multi-window ...............................................25
PIN code, selecting.............................................................15
PIP (see “picture-in-picture”)
power, auto off......................................................................27
programming
channels automatically ................................................12
favorite channels ............................................................14
remote control for use with a VCR
or cable TV converter.................................................8
programs, blocking with V-Chip....................................15
R
ratings
blocking programs by...................................................17
MPAA ..................................................................................17
TV..........................................................................................17
unrated movies or programs......................................19
youth TV .............................................................................17
remote control
batteries, installing...........................................................7
learning about..................................................................10
preparing for use ..............................................................7
programming for use with a VCR
or cable TV converter.................................................8
using ......................................................................................7
using with a VCR or cable TV converter .................7
S
SAP, selecting .......................................................................29
satellite receiver/DVD and VCR, connecting............. 4
signal source, selecting ....................................................12
sound
adjusting ............................................................................29
muting.................................................................................29
stereo/SAP broadcasts, selecting............................29
sub-bass system (SBS), using.................................. 31
surround, using .............................................................. 30
specifications ........................................................................33
stereo sound, selecting.....................................................29
surround sound, using ..................................................... 30
switch, TV/CABLE/VCR ......................................................7
switching between two channels .................................13
switching the main and small pictures (PIP) ...........24
T
troubleshooting....................................................................32
TV
connecting...........................................................................2
location, selecting ............................................................1
ratings .................................................................................17
setting up...........................................................................11
TV/CABLE/VCR switch .......................................................7
TV/VIDEO button on the TV, using ..............................12
V
V-Chip
blocking channels ..........................................................20
blocking programs by ratings....................................17
selecting a PIN code.....................................................15
using ....................................................................................15
VCR and cable converter box, connecting .................3
VCR and DVD with ColorStream, connecting............4
VCR and DVD/satellite receiver, connecting .............4
VCR, connecting ....................................................................2
VCRs, connecting two .........................................................5
video input, watching ........................................................27
video labels............................................................................23
video lock ...............................................................................21
W
warranty ................................................................................. 34
watching
multi-window picture-in-picture (PIP)...................25
picture-in-picture (PIP)................................................24
video input.........................................................................27
Y
youth TV ratings...................................................................17
Toshiba America
Consumer Products, Inc.
Head Office
82 Totowa Road
Wayne, NJ 07470
Factory Service Center
1420B Toshiba Drive
Lebanon, TN 37087
Toshiba Hawaii, Inc.
Head Office
327 Kamakee Street
Honolulu, HI 96814
Toshiba of Canada, Ltd.
Manufactured by:
Toshiba America
Consumer Products, Inc.
PRINTED IN USA
(00-06)B 23563919B
Head Office
191 McNabb Street
Markham, Ontario L3R 8H2
Canada
Service Centers
Toronto
191 McNabb Street
Markham, Ontario L3R 8H2
Canada
Tel: (905) 470-5400
Montreal
1643 North Service Road
Trans-Canada Highway
Dorval, Quebec H9P 1J1
Canada
Tel: (514) 856-4100
Vancouver
22171 Fraserwood Way
Richmond, British Columbia V6W 1J5
Tel: (604) 303-2500
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
Toshiba 32AX60 Manual de usuario
- Categoría
- Televisores LCD
- Tipo
- Manual de usuario
En otros idiomas
- English: Toshiba 32AX60 User manual