Toshiba 36A61 Manual de usuario

Marca: Toshiba

Modelo: 36A61

Categoría: Televisores LCD

Tipo: Manual de usuario

Color Television

36A61

Owner’s Manual

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

SAFETY PRECAUTIONS

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

ADVERTENCIA RIESGO DE

DESCARGA ELÉCTRICIA - NO ABRIR

The lightning symbol in the triangle tells you that the

voltage inside this product may be strong enough to

cause an electric shock. DO NOT TRY TO SERVICE

THIS PRODUCT YOURSELF.

The exclamation mark in the triangle tells you that

important operating and maintenance instructions

follow this symbol.

CAUTIONS

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS

POLARIZED PLUG WITH AN EXTENSION CORD RECEP-

TACLE OR OTHER OUTLET UNLESS THE PRONGS CAN BE

FULLY INSERTED INTO THE OUTLET TO PREVENT ANY

EXPOSURE OF THE PRONGS ON THE POLARIZED PLUG.

PRECAUCIONES

PARA EVITAR DESCARGAS ELÉCTRICAS, NO UTILICE ESTE

ENCHUFE POLARIZADO CON UN RECEPTÁCULO DE

CABLE DE EXTENSIÓN U OTRA TOMA SALVO QUE LA

CLAVIJA ESTÉ COMPLETAMENTE INSERTADA EN LA

TOMA PARA EVITAR CUALQUIER EXPOSICIÓN DE LOS

VÁSTAGOS DEL ENCHUFE POLARIZADO.

WARNING

To avoid personal injury:

• Do not stand or climb on the TV.

• Do not put a VCR or any heavy object on top of the TV.

ADVERTENCIA

Para evitar daños personales:

• No se ponga de pie en el TV ni suba a él.

• No coloque el vídeo (p. ej. VCR) ni otro objeto pesado en la parte

superior del TV.

Avoid displaying stationary images on your TV screen for extended

periods of time. Stationary patterns generated by a picture-in-picture

(PIP) display, computer displays, video games, stock market reports,

etc., can become permanently engrained on the picture tube. This

damage is not protected by your warranty because it is the result of

misuse. If you wish to use your TV to display still images, reduce

brightness and contrast settings. Never leave a PIP, computer, or video

game display unattended.

Use this TV set with the Toshiba stand listed

on page 38 only. Use with other stands may result in

instability, causing possible injury or death.

Note to CATV system installers in the USA

This reminder is provided to call the CATV system installer’s

attention to Article 820-40 of the NEC, which provides guidelines

for proper grounding, and, in particular, specifies that the cable

ground shall be connected to the grounding system of the building,

as close to the point of cable entry as practical.

IMPORTANT SAFETY

INSTRUCTIONS

INSTRUCCIONES DE

SEGURIDAD

CAUTION

PLEASE READ AND OBSERVE ALL WARNINGS AND

INSTRUCTIONS CONTAINED IN THIS SECTION AND

THOSE ON YOUR TV SET.

RETAIN THIS SECTION FOR REFERENCE.

PRECAUCIÓN

LEA Y TENGA EN CUENTA TODAS LAS ADVERTENCIAS E

INSTRUCCIONES QUE SE ENCUENTRAN EN ESTE

PANFLETO Y LAS DE LOS APARATOS DE TELEVISIÓN.

MANTENGA ESTE PANFLETO PARA FUTURAS

REFERENCIAS.

Electrical energy can perform many useful functions. This TV set has

been engineered and manufactured to assure your personal safety.

However, improper use can result in potential electrical shock or fire

hazards. In order not to defeat the safeguards incorporated in this TV

set, observe the following basic rules for antenna/TV installation, use

and servicing.

Do not remove the cabinet cover. This may expose you to dangerous

voltages. Refer all servicing to qualified service personnel.

La energía eléctrica puede realizar funciones muy útiles. Este televisor

ha sido diseñado y fabricado para asegurar su seguridad personal. Sin

embargo, la utilización inadecuada del mismo puede resultar en

descargas eléctricas o en el riesgo de incendios. Para no anular las

protecciones incorporadas en este televisor, tenga en cuenta las reglas

básicas de instalación de la antena/televisor, y en caso de proplemas

póngase en contacto con un centro de reparaciones.

No extraiga de la cubierta de la caja. Esto podría dejarle expuesto a

tensiones peligrosas. En caso de averia, consulte los servicios de

personal cualificado.

INSTALLATION / INSTALACIÓN

Power Sources — The TV set should be operated only from the type of

power source indicated on the TV set or as indicated in the Owner’s

Manual. If you are not sure of the type of power supply in your home,

consult your sales person or your local power company. For TV sets

designed to operate from battery power, refer to the operating

instructions.

Fuentes de alimentación — Este televisor solamente deberá alimentarse

con la fuente de alimentación indicada en la etiqueta de características.

Si no está seguro del tipo de fuente de alimentación de su hogar,

consulte al proveedor de su televisor o a la compañia eléctrica local.

Para productos destinados a alimentarse con pilas, u otras fuentes,

consulte las instrucciones de operación.

Grounding or Polarization — The TV set is equipped with one of the

following type plugs. If the plug should fail to fit the power outlet,

contact your electrician to replace your obsolete outlet. DO NOT

defeat the safety purpose of the type plug on the TV set.

Puesta a tierra o polarización — Este televisor puede poseer un enchufe

de los tipos siguinetes. Si el enchufe no entra en la toma de la red, póngase

en contacto con un electricista para que le cambie

la toma anticuada. NO

anule el fin de seguirdad de sete tipo de enchufe del televisor.

A product and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the product

and cart combination to overturn.

La combinación de un producto y

un carrito deberá moverse con

cuidado. Las paradas repentinas,

la fuerza excesiva, y las superficies

desiguales pondrían hacer que

volcase la combinación del carrito

y del producto.

USE / UTILIZACIÓN

Overloading — Do not overload wall outlets, extension cords or

convenience receptacles beyond their capacity, since this can result in

fire or electric shock.

Sobrecarga — No sobrecargue las tomas de la red, los cables

prolongadores, ni los adaptadores para múltiples tomas, ya que esto

supondría el riesgo de incendios o de descargas eléctricas.

During lightning storms, or when the TV set will be left unattended

and unused for a long period of time, unplug the power cord from the

wall outlet and disconnect the antenna or cable system. This will

prevent damage to the TV set due to lightning and power-line surges.

Durante tormentas eléctricas, o cuando no vaya a utilizar el televisor

durante mucho tiempo, desenchufe el cable de alimentación de la toma

de la red y desconecte la antena o el sistema de cablevisión. Esto evitará

que se dañe el televisor debido a rayos y a sobretensiones repentinas en

la red.

Object and Liquid Entry — Never push objects of any kind into the

TV set through the cabinet slots as they may touch dangerous voltage

points or short out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the TV set.

Entrada de objetos y líquidos — No introduzca nunca objetos de

ningún tipo en este televisor a través de las aberturas, ya que podrían

tocar puntos de tensión peligrosa o cortocircuitar piezas, lo que podría

resultar en incendio o descarga eléctrica. No vierta nunca liquidos de

ningún tipo sobre este televisor.

Cleaning — Unplug the TV set from the wall outlet before cleaning or

polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth

lightly dampened with water for cleaning the exterior of the TV set.

Limpieza — Desenchufe el televisor de la toma de la red antes de

limpiarlo. No utilice limpiadores líquidos ni aerosoles. Para limpiar el

exterior del televisor, utilice un paño ligeramente humedecido en agua.

Attachments — Never add accessories that have not been specifically

designed for the TV set. Never remodel the TV set by yourself as this

can result in a fire hazard or electric shock.

Aditamentos — No utilice aditamentos no recomendados por el

fabricante del televisor, ya que podrían suponer un peligro. No

remodele nunca el televisor usted mismo, ya que esto podría causar el

riesgo de incendios o descargas eléctricas.

If a snapping or popping sound from a TV set is heard continuously or

frequently while the TV set is operated, unplug the TV set and consult

your dealer or service technician. It is normal for some TV sets to make

occasional snapping or popping sounds, particularly when being turned

on or off.

Si se oye un sonido seco de un televisor continuo o frecuente mientras

el televisor esté funcionando, desenchúfelo y consulte a su proveedor o

a un técnico de servicio. Es normal que algunos televisores produzcan

sonidos secos, particularmente cuando conecte o desconecte su

alimentación.

A polarized alternating current line plug — having one blade wider

than the other. This plug will fit into the power outlet only one way. If

you are unable to insert the plug into the outlet, try reversing the plug.

Un enchufe de línea de corriente alterna polarizado — posee una

cuchilla más ancha que la otra. Este enchufe entrará en la toma de la

red de una sola forma. Si no puede inertar el enchufe en la toma de la

red, trate de invertirlo.

Alternate Warnings — A three-wire grounding-type plug — a plug

having a third (grounding) pin. This plug will only fit into grounding-

type power outlet.

Advertencias alternativas — Enchufe de tippo puesta a tierra de tres

conductores — enchufe que posee un tercer terminal (de puesta a

tierra). Este enchufe solamente encajará en una toma de la red de tipo

puesta a tierra.

Water and Moisture — Do not use the TV set near water — for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a

wet basement; or near a swimming pool; and the like.

Agua y humedad — No utilice el televisor cerca del agua — por

ejemplo, cerca de una bañera, un lavabo, un fregadero, una lavadora, en

un sótano húmedo, cerca de una piscina, ni lugares por el estilo.

Ventilation — The slots and openings in the cabinet and in the back or

bottom are provided for necessary ventilation. Never block or cover

these slots and openings to ensure reliable operation of the TV set and

to protect it from overheating.

Ventilación — Las ranuras y aberturas de la caja y de la parte posterior

o de la base son para proporcionar la ventilación necesaria. Para

asegurar la operación fiable del televisor para protegerlo contra el

recalentamiento. No bloquee ni cubra nunca estas ranuras y aberturas.

a. Never cover the slots and openings with a cloth or other materials.

a. No cubra nunca las ranuras ni las aberturas con paños ni otros

materiales.

b. Never block the slots and openings by placing the TV set on a bed,

sofa, rug or other similar surface.

b. No bloquee nunca las ranuras ni las aberturas colocando el televisor

sobre una cama, un sofá, una alfombra, ni demás superficies similares.

c. Never place the TV set in a confined space such as a bookcase, built-

in cabinet, or any other place of poor ventilation.

c. No coloque nunca el televisor en un espacio cubierto, como una

librería o un estante empotrados, nien un lugar de mala ventilación.

Heat — Do not place the TV set near or over a radiator or heat

Calor — No coloque el televisor cerca ni sobre un radiador ni un

registro de calor, ni expuesto a la luz solar directa.

Power-Cord Protection — Do not allow anything to rest on or roll

over the power cord, and do not place the TV set where the power cord

is subject to wear or abuse.

Protección del cable de alimentación — No coloque ni pase sobre el

cable de alimentación, ni coloque el telivisor donde su cable de

alimentación pueda sufir cualquier tipo de daños.

Accessories — Do not place the TV set on an unstable cart, stand,

tripod, bracket, or table. The TV set may fall, causing serious injury to

a child or adult, and serious damage to the TV set. Use only with a cart,

stand, tripod, bracket, or table recommended by the manufacturer, or

sold with the TV set, and should use a mounting accessory recom-

mended by the manufacturer.

Accesorios — No coloque el televisor sobre un carrito, una base, un

trípode, un soporte ni una mesea inestable. El televisor podría caerse,

causando serios daños a niños o adultos, o al propio televisor. Utilice

solamente el carrito, la base, el trípode, el soporte, o la mesa que

recomiende el fabricante, o que se venda con el televisor, y utilice un

accesorio de montaje recomendado por el fabricante.

SERVICE / SERVICIO DE REPARACIÓN

Damage Requiring Service — Unplug the TV set from the wall outlet

and refer servicing to qualified service personnel under the following

conditions:

Daños que requieren el servicio de reparación — En los casos

siguientes, desenchufe el televisor de la toma de la red y solicite los

servicios de personal de reparación especializado:

a. When the power cord or plug is damaged or frayed.

a. Cuando se haya dañado el cable de alimentación o el enchufe.

b. When liquid has been spilled into the TV set.

b. Cuando se haya vertido líquido dentro del televisor.

c. When the TV set has been exposed to rain or water.

c. Cuando el televisor haya estado expuesto a la lluvia o al agua.

d. When the TV set has been subject to excessive shock by being

dropped, or the cabinet has been damaged.

d. Cuando el televisor haya estado expuesto a golpes excesivos o haya

caído, o su caja se haya dañado.

e. When the TV set does not operate normally even though you follow

the operating instructions. Adjust only those controls that are

specified in the operating instructions. Improper adjustment of

other controls may result in damage and will often require extensive

work by a qualified technician to restore the TV set to normal

operation.

When the TV set exhibits a distinct change in performance. This

indicates a need for service.

e. Cuando el televisor no funcione normalmente incluso al seguir las

instrucciones de operación. Ajuste solamente los controles indicados

en las instrucciones de operación, ya que un ajuste inadecuado de

otros controles podría resultar en daños y a menudo requerirán un

trabajo difícil por un técnico cualificado para devolver el televisor a

su funcionamiento normal.

Cuando el funcionamiento del televisor haya cambiado

notablemente — esto indica la necesidad del servicio de reparación.

Servicing — Do not attempt to service the TV set yourself. To open or

remove the covers may expose you to dangerous voltage or other

hazards. Refer all servicing to qualified service personnel.

Reparación — No intente nunca reparar el televisor por sí mismo. La

apertura o extracción de cubiertas podría exponerle a tensiones

peligrosas u otros peligros. En caso de avería solicite los servicios de

personal de reparación cualificado.

Replacement Parts — When replacement parts are required, be sure

the service technician certifies in writing that he has used replacement

parts specified by the manufacturer that have the same characteristics as

the original parts. Unauthorized substitutions may result in fire, electric

shock, or other hazards.

Reemplazo de piezas — Cuando sea necesario reemplazar piezas,

cerciórese de que el técnico de reparación utilice las piezas de reemplazo

especificadas por el fabricante u otras que posean las mismas

características que las originales. Las substituciones no autorizadas

podrían resultar en incendios, descargas eléctricas, u otros peligros.

Safety Check — Upon completion of any service or repairs to the TV

set, ask the service technician to perform routine safety checks (as

specified by the manufacturer) to determine that the TV set is in safe

operating condition, and to so certify.

Comprobación de seguridad — Al finalizar cualquier reparación de

este televisor, solicite al técnico de reparación que realice las

comprobaciones de sguridad (especificadas por el fabricante) para

determinar y certificar si el producto se encuentra en las condiciones de

operación apropiadas.

When the TV set reaches the end of its useful life, improper disposal

could result in a picture tube implosion. Ask a qualified service

technician to dispose of the TV set.

Cuando el televisor llegue al final de su vida útil, si se deshace de él de

forma inapropiada, el tubo de imagen puede explotar. Cuando desee

deshacerse de un televisor, solicite este servicio a un técnico de

reparación especializado.

ANTENNA / ANTENA

Outdoor Antenna Grounding — If an outdoor antenna is installed,

follow the precautions below.

An outdoor antenna system should not be located in the vicinity of

overhead power lines or other electric light or power circuits, or where

it can come in contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,

EXTREME CARE SHOULD BE TAKEN TO KEEP FROM

CONTACTING SUCH POWER LINES OR CIRCUITS AS

CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.

Be sure the antenna system is grounded so as to provide some

protection against voltage surges and built-up static charges. Section

810 of the National Electrical Code in the USA and Section 54 of the

Canadian Electrical Code in Canada provides information with respect

to proper grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of grounding

conductors, location of antenna discharge unit, connection to

grounding electrodes, and requirements for the grounding electrode.

Puesta a tierra de la antena exterior — Cuando instale una antena

exterior, tenga en cuenta las precauciones siguientes.

Un sistema de antena esterior no deberá colocarse cerca de líneas de alta

tensión ni otros circuitos de iluminación o alimentación, ni donde

pueda entrar en contacto con tales líneas o circuitos.

CUANDO INSTALE UN SISTEMA DE ANTENA EXTERIOR,

TENGA EXTREMADO CUIDADO PARA EVITAR QUE ENTRE

EN CONTACTO CON TALES LÍNEAS DE ALIMENTACIÓN O

CIRCUITOS, YA QUE TAL CONTACTO PODRÍA RESULTAR

INVARIABLEMENTE FATAL.

Cerciórese de que el sistema de antena esté puesto a tierra a fin de que

proporcione cierta protección contra sobretensiones y cargas estáticas.

La Sección 810 del Código Eléctrico Nacional (NEC) de EE.UU. y la

Sección 54 del Código Eléctrico Canadiense ofrecen informacón con

respecto a la puesta a tierra adecuada de una unidad de descarga de

antena, el tamaño de los conductores de puesta a tierra, la ubicación de

la unidad de descarga de la antena, la conexión de los electrodos de

puesta a tierra, y los requisitos de tales electrodos.

Welcome to Toshiba ............................................ 6

Exploring your new TV .............................................6

Selecting a location for the TV ...................................6

Notice of possible TV stand instability .................. 6

Connecting your TV ............................................. 7

Note regarding picture quality .............................. 7

Connecting a VCR ....................................................7

Connecting a cable converter box .............................. 8

Connecting a cable converter box and VCR ............... 8

Connecting a DVD player or satellite receiver and a

VCR .......................................................................... 9

Connecting a DVD player with ColorStream™

(component video) and a VCR ................................10

Connecting two VCRs .............................................10

Connecting a camcorder ..........................................11

Connecting an audio amplifier................................. 11

Using the remote control ................................. 12

Preparing the remote control for use ........................12

Installing the remote control batteries ......................12

Using the remote control with a Toshiba VCR or

cable TV converter ...................................................12

Programming the remote control for use with

a non-Toshiba VCR or cable TV converter ..............13

VCR code table...................................................13

Cable TV converter code table ............................ 14

Learning about the remote control ........................... 15

Setting up your TV ............................................. 16

Changing the on-screen display language ................. 16

Selecting the antenna input......................................16

Selecting the signal source ........................................17

Watching video input ..............................................17

Programming channels into the TV’s memory .........17

Programming channels automatically .................. 17

Adding and erasing channels manually................ 18

Changing channels...................................................18

Using the TV’s features..................................... 19

Adjusting the channel settings..................................19

Switching between two channels .............................. 19

Programming your favorite channels ........................ 19

Using the V-Chip Control (blocking) feature ........... 20

Selecting a PIN code ...........................................20

Changing your PIN code .................................... 21

Blocking programs by ratings .............................. 22

Ratings definitions (MPAA, Youth TV, TV) ........22

Unblocking programs temporarily ......................23

Blocking unrated movies and programs............... 23

Blocking channels ............................................... 24

Locking video inputs ...............................................25

Channel labels ......................................................... 26

Video labels .............................................................27

Watching picture-in-picture (PIP)............................28

Switching the main and small pictures .....................28

Changing the location of the PIP window................ 29

Freezing the PIP display ........................................... 29

Watching multi-window PIP ...................................29

Adjusting the picture ............................................... 30

Adjusting the picture quality .................................... 30

Selecting the color temperature ................................30

Adjusting the picture preference...............................31

Displaying on-screen information ............................31

Setting the off timer .................................................31

Auto power off .........................................................31

Using the closed caption feature ...............................32

Adjusting the sound .................................................33

Muting the sound ....................................................33

Selecting stereo/SAP broadcasts ...............................33

Adjusting the sound quality .....................................34

Using the surround sound feature ............................34

Selecting variable audio OUT ..................................35

Turning off the built-in speakers ..............................35

Using the sub-bass system (SBS) .............................. 36

Viewing the demonstration (DEMO) mode ............36

Understanding the last mode memory feature ..........36

Appendix .............................................................. 37

Troubleshooting .......................................................37

Cleaning and care ....................................................38

Specifications ........................................................... 38

Limited United States warranty ................................39

Attention Canadian customers ................................. 39

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

ANT (75Ω)

ANT-1 OUT ANT-2

VIDEO 1VIDEO 2

S-VIDEO

VIDEO

L/MONO

AUDIO

OUT

VIDEO

L/MONO

AUDIO

DVD IN

COLOR

STREAM

INPUT

AUDIO

ANT (75Ω)

ANT-1 OUT ANT-2

VIDEO 1VIDEO 2

S-VIDEO

VIDEO

L/MONO

AUDIO

OUT

VIDEO

L/MONO

AUDIO

DVD IN

COLOR

STREAM

INPUT

AUDIO

Welcome to Toshiba

Congratulations! You have purchased one of the finest color TVs on the

market. The goal of this manual is to guide you through setting up and

operating your Toshiba TV as quickly as possible. Please make sure you

have received the following items: TV, remote control, batteries, owner’s

manual, registration card, and extended service plan literature. If you

did not receive all of the items or if any of the items are damaged or

broken, please contact your Toshiba dealer. In addition, you may need

to purchase other audio or video cables to connect your equipment. See

“Connecting your TV” on page 7 for more information.

Please read all safety and operating instructions carefully before you

proceed.

Exploring your new TV

You can operate your TV using the buttons on the front panel or the

remote control. The back panel provides all the terminal connections

you will need to connect other equipment to your TV.

wide prong

Caution:

The plug has one prong wider than the other

and will fit only one way into a standard

electrical outlet (120 volt AC, 60 Hz). If the

plug does not fit into the outlet, try turning it

around. If the

plug still

does not fit,

the outlet is

probably non-

standard and

must be

replaced by a qualified electrician. Do not

tamper with the plug or try to force it

into a non-standard outlet.

Selecting a location for the TV

• Place the TV on the floor or on the recommended TV stand (see

“Notice of Possible TV Stand Instability” at right).

• Place the TV in a location where light does not directly hit the

screen.

• Place the TV far enough from the walls to allow proper ventilation.

Inadequate ventilation may cause overheating, which may damage

the TV.

The serial number is on the back of your TV. Record the number in

the space below. Refer to the model and serial numbers whenever you

communicate with your Toshiba dealer about this TV.

Model number: ________________________

Serial number: ________________________

NOTICE OF POSSIBLE

TV STAND INSTABILITY

Use with other

stands may result

in instability,

causing possible injury or death.

WARNING: RISK OF

SERIOUS PERSONAL

INJURY OR DEATH!

Use your TV with the Toshiba TV

stand recommended below only!

TV Model TV Stand

36A61 ST3641

36A61

CH RTN

ADV/

PIP CH

ADV/

PIP CH

CABLE

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

VCR

VOL

ENT

ENTER

PLAY PIP

REC

STILL LOCATE SWAP

TV/VCR REW FF

STOP SOURCE

FAV

C.CAPT

EXIT

RESET

100

CT-9946

36A61 – Rear

Video 1

ColorStream

(component video)

Video 2

36A61

MENU TV / VIDEO VOLUME CHANNEL POWER

Channel

TV/Video

Volume

Power Indicator (Red)

Remote Sensor

POWER

Video 3

VIDEO L/MONO R

AUDIO

VIDEO-3 IN

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

Connecting your TV

If you have not connected electronic equipment before, or you have

been frustrated in the past, you may wish to read this section.

Note: Cables are not supplied.

• A coaxial cable is the standard cable that comes in from your

antenna or cable converter box. Coaxial cables use “F” connectors.

• Audio and video cables are usually color coded according to use:

yellow for video; red and white for audio. The red audio cable is for

the stereo right channel; the white audio cable is for the stereo (or

mono) left channel. If you look at the rear panel of the TV, you will

see that the terminals are color coded in the same manner as the

cables.

• S-video cables provide better picture performance than standard

video cables. S-video cables can be used only with S-video compat-

ible components.

• ColorStream

(component video) cables come in sets of three.

A ColorStream (component video) connection will provide the best

picture performance.

Caution:

Do not plug in any power cords until you have

finished connecting all of your equipment.

Note:

If you have a mono VCR, connect L/Mono to

VCR Audio OUT using only one audio cable.

If you have an S-VHS VCR, use an S-video

cable instead of a regular video cable.

Do not connect a regular video cable and an

S-video cable to Video-1 (or Video-2) at the

same time. Doing so will distort the picture.

NOTE REGARDING

PICTURE QUALITY

When connecting video equipment,

such as a VCR or DVD player:

• For GOOD picture quality: Use

regular video cables.

• For BETTER picture quality: If your

equipment has S-video connections,

use S-video cables instead of regular

video cables.

• For BEST picture quality: If your

equipment has ColorStream

(component video) connections,

use component video cables

instead of regular or S-video cables.

Component video cables come in

sets of three.

Note: Do not connect a regular video

cable and an S-Video cable to VIDEO-1

(or VIDEO-2) at the same time. Doing

so will distort the picture.

Connecting a VCR

This connection allows you to watch local channels and video pro-

grams, play or record on the VCR while watching TV, and record

from one channel while watching another channel.

You will need:

• one coaxial cable

• one pair of audio cables (one single audio cable for a mono VCR)

• one video cable

ANT (75Ω)

ANT-1 OUT ANT-2

VIDEO 1VIDEO 2

S-VIDEO

VIDEO

L/MONO

AUDIO

OUT

VIDEO

L/MONO

AUDIO

DVD IN

COLOR

STREAM

INPUT

AUDIO

Stereo VCR

VIDEO AUDIO

OUT

IN from ANT

CH 3

CH 4

OUT to TV

From Cable or Antenna

Regular

Video Cable

S-Video

Cable

ColorStream

(Component

Video) Cables

Cable Types

Coaxial

(Antenna)

Cable

Audio

Cable

Reference

Connecting

your TV

Connecting a cable converter box

This connection allows you to watch basic and premium cable

channels. To use the TV features (such as PIP swap, channel

y z,

channel block, favorite channels, or channel labels ), select ANT-1. To

view premium channels, select ANT-2, tune the TV to channel 3 or 4

(whichever channel is vacant in your area), and use the converter box

to change channels.

You will need:

• two coaxial cables

ANT (75Ω)

OUT DVD IN

From Cable

Cable

Converter

Box

Connecting a cable converter box and VCR

This connection allows you to watch and record basic and premium

cable channels, as well as watch videotapes. Set the TV signal source

to Video1 (see “Watching video input” on page 17). Tune the VCR to

channel 3 or 4 (the same channel as the converter box output switch),

and use the cable converter box to change channels. Set the PIP

source to “TV” (see page 28).

You will need:

• three coaxial cables

• one pair of audio cables (one single audio cable for a mono VCR)

• one video cable

• one cable splitter

ANT (75Ω)

ANT-1 OUT ANT-2

VIDEO 1VIDEO 2

S-VIDEO

VIDEO

L/MONO

AUDIO

OUT

VIDEO

L/MONO

AUDIO

DVD IN

COLOR

STREAM

INPUT

AUDIO

Stereo VCR

VIDEO AUDIO

IN from ANT

CH 3

CH 4

OUT to TV

Cable

Converter Box

OUT

From Cable

OUT

Cable

Signal

Splitter

Note:

When you use a converter box with your TV,

the remote control may not operate certain

features, such as PIP swap, channel y z,

channel block, favorite channels, or channel

labels.

Note:

When you use a converter box with your

TV, the remote control may not operate

certain features, such as PIP swap,

channel y z, channel block, favorite

channels, or channel labels.

If you have a mono VCR, connect

L/Mono to VCR Audio OUT using only

one audio cable.

If you have an S-VHS VCR, use an

S-video cable instead of a regular video

cable.

Do not connect a regular video cable

and an S-video cable to Video-1 (or

Video-2) at the same time.

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Connecting a DVD player or satellite receiver

and a VCR

This connection allows you to watch DVD/satellite, VCR, or TV

programs. You can record from the DVD player/satellite receiver or

TV. You can also record one TV channel while watching another

channel.

Note: If your DVD player has component video connections, follow

the connection instructions under “Connecting a DVD player with

ColorStream

™

(component video) and a VCR” on page 10.

You will need:

• one coaxial cable

• three pairs of audio cables (one pair and two single audio cables

for a mono VCR)

• two regular video cables

• one S-video cable

ANT (75Ω)

OUT DVD IN

Stereo VCR

DVD / Satellite Receiver

To Satellite

To Antenna

Note:

You can use a regular video cable instead of

an S-video cable between the TV and DVD

player/satellite receiver, but the picture quality

will decrease.

The illustration at left shows one S-video

cable and one pair of audio cables connected

from the DVD player/satellite receiver to

Video-1 on the TV.

Do not connect a regular video cable and an

S-video cable to Video-1 (or Video-2) at the

same time. Doing so will distort the picture.

When recording, set Audio Out to FIX

(see “Selecting variable audio OUT”

on page 35). With Audio Out set to

FIX, the TV’s volume setting during

recording will not affect the sound

level being recorded.

Reference

Connecting

your TV

Connecting a DVD player with

ColorStream™ (component video) and

a VCR

This connection allows you to watch DVD, VCR, or

TV programs, and record DVD or TV programs

(when authorized). You can record from one source

while watching a program from another source.

Your TV has ColorStream (component video) connec-

tions. Connecting your TV to a component video

compatible DVD player (such as a Toshiba DVD

player with ColorStream

™

) can greatly enhance

picture quality and performance.

You will need:

• one coaxial cable

• three pairs of audio cables (one pair and two

single audio cables for a mono VCR)

• two regular video cables

• one set of ColorStream (component) video cables

Note:

For the best picture performance, use ColorStream

(component video) cables between the TV and DVD

player. To record from the DVD player, the DVD player

and TV must select VIDEO 1.

Note:

If you have S-VHS VCRs, use S-video cables

instead of regular video cables.

Do not connect a regular video cable and an

S-video cable to Video-1 (or Video-2) at the

same time.

Do not connect the same VCR to the output

and input jacks on the TV at the same time.

ANT (75Ω)

OUT DVD IN

Stereo VCR

DVD Player with ColorStream (component video)

To Antenna

Connecting two VCRs

This connection allows you to record from one VCR to another VCR

while watching a video program. You can also record from one TV

channel while watching another channel.

You will need:

• one coaxial cable

• two pairs of audio cables (two single audio cables for mono VCRs)

• two video cables

Stereo VCR [Playback]

VIDEO AUDIO

OUT

IN from ANT

CH 3

CH 4

OUT to TV

ANT (75Ω)

ANT-1 OUT ANT-2

S-VIDEO

VIDEO

L/MONO

AUDIO

VIDEO 1VIDEO 2

OUT

VIDEO

L/MONO

AUDIO

DVD IN

COLOR

STREAM

INPUT

AUDIO

To Antenna

Stereo VCR

[Recording]

VIDEO AUDIO

OUT

IN from ANT

CH 3

CH 4

OUT to TV

Caution:

The unauthorized recording of

television programs, videotapes,

DVDs, and other materials may

infringe upon the provisions of

Note:

When recording, set Audio Out to

FIX (see “Selecting variable audio

OUT” on page 35). With Audio Out

set to FIX, the TV’s volume setting

during recording will not affect the

sound level being recorded.

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Connecting a camcorder

This connection allows you to watch videos recorded on a camcorder.

You will need:

• one pair of audio cables

• one video cable

ANT (75Ω)

ANT-1 OUT ANT-2

VIDEO 1VIDEO 2

OUT

VIDEO

L/MONO

AUDIO

DVD IN

COLOR

STREAM

INPUT

AUDIO

S-VIDEO

VIDEO

L/MONO

AUDIO

S-VHS Camcorder

AUDIOVIDEO

OUT

TV Back

S-VIDEO

Connecting an audio amplifier

This connection allows you to use an audio amplifier to adjust the

audio level. This connection also allows you to use external speakers.

You will need:

• one pair of audio cables

ANT (75Ω)

OUT DVD IN

Audio Amplifier

To Cable, Cable Box,

or Antenna

Note:

If your camcorder has an S-video connection,

an S-video cable will provide better picture

performance than a regular video cable.

Do not connect a regular video cable and an

S-video cable to Video-1 (or Video-2) at the

same time.

VIDEO L/MONO R

AUDIO

VIDEO-3 IN

AUDIOVIDEO

OUT

TV Front

Camcorder

Note:

To control the audio, both the TV and the

amplifier must be turned on, and the volume

of both must be set above 0, or you will not

hear any sound. See “Selecting variable audio

OUT” on page 35 for additional details.

Using the

Remote Control

Using the remote control

Preparing the remote control for use

The remote control will operate your TV, most VCR models, and

most cable TV converters together, even if they are different brands.

• If you will be using your TV with a Toshiba VCR or cable TV

converter, your remote control is already programmed and ready

to use. See “Using the remote control with a Toshiba VCR or

cable TV converter” below.

• If you own a non-Toshiba VCR or converter and want to use your

TV remote control to operate it, you will need to program the

remote control. See “Programming the remote control for use

with a non-Toshiba VCR or cable TV converter” on page 13.

Installing the remote control batteries

To install the batteries:

1. Slide the battery cover off the back of the remote control.

2. Install two “AA” size batteries. Match the + and – symbols on

the batteries to the symbols on the battery compartment.

3. Slide the battery cover back onto the remote control until the

lock snaps.

Using the remote control with a Toshiba VCR

or cable TV converter

To control a Toshiba VCR:

Set the TV/CABLE/VCR switch to the VCR position. The

shaded buttons in the illustration at right will then control the

VCR. The unshaded buttons will operate the TV as usual.

To control a Toshiba cable TV converter:

Set the TV/CABLE/VCR switch to the CABLE position. The

shaded buttons in the top portion of the illustration at right will

then control the cable TV converter.

Note:

The remote control provided with your TV

may or may not operate certain features on

your VCR, cable TV converter, or other

electronic equipment. Refer to the owner’s

manuals provided with your other equipment

to see which features are available. In

addition, the other remote controls may have

buttons not available on your TV’s remote

control. If you would like to use those features

or buttons, you may need to use the original

remote controls provided with your other

equipment.

Caution:

• Dispose of batteries in a designated

disposal area. Do not throw batteries

into a fire.

• Do not mix battery types or combine used

batteries with new ones.

• Remove dead batteries immediately to

prevent battery acid from leaking into the

battery compartment.

• If you do not intend to use the remote

control for a long time, remove the

batteries.

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

Channel

Numbers

TV/CABLE/VCR

switch

ENT (used for the “ENTER”

command with some VCRs

and cable TV converters)

POWER

CH (Channel)

VOL

RECALL

PLAY PIP

REC

STILL LOCATE SWAP

TV/VCR REW FF

STOP SOURCE

FAST FORWARD

CT-9946

STOP

PLAY

TV/VCR

REWIND

RECORD

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

VCR code table

Brand Code

Adventura 019

Aiko 297

Aiwa 019

Akai 060, 068, 080, 125,

261

American High 054

Asha 259

Audiovox 056

Beaumark 259

Bell & Howell 123

Brandt 206

Broksonic 140, 203, 230, 314,

380

Calix 056

Canon 054

Capehart 039

Carver 100

CCE 091, 297

Citizen 056, 297

Colt 091

Craig 056, 066, 091, 259

Curtis Mathes 054, 060, 079

Cybernex 259

Daewoo 039, 064, 297

Daytron 039

Dynatech 019

Electrohome 056

Electrophonic 056

Emerex 051

Emerson 019, 021, 056, 062,

080, 087, 140, 203,

227, 228, 230, 231,

297, 313, 314, 380,

498

Fisher 066, 073, 085, 123

Fuji 052, 054

Funai 019, 344

Garrard 019, 344

GE 054, 079, 084, 221

Go Video 251, 298

Goldstar 037, 056, 057

Gradiente 019

Harley Davidson 019

Harman/Kardon 057, 094

Harwood 087, 091

Headquarter 065

HI-Q 066

Hitachi 060, 061, 084, 124,

185, 254

Jensen 060

JVC 027, 060, 086

Kenwood 057, 060, 086

Note:

• Every time you replace the batteries, you

must reprogram the remote control.

• Some newer VCRs are capable of working

on either of two remote codes. These

VCRs have a switch labeled “VCR1/

VCR2.” If your VCR has this kind of switch

and does not respond to any of the codes

for your VCR brand, set the switch to the

other position (VCR1 or VCR2) and

reprogram the remote control.

CH RTN

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

C.CAPT

100

Channel

Numbers

TV/CABLE/VCR

switch

ENT (used for the “ENTER”

command with some VCRs

and cable TV converters)

POWER

CH (Channel)

VOL

RECALL

Programming the remote control for use

with a non-Toshiba VCR or cable TV converter

The remote control provided with your Toshiba TV is

preprogrammed to operate Toshiba VCRs and cable TV converters.

To operate a non-Toshiba VCR or converter using the remote

control provided with your TV:

1. Refer to the VCR and cable TV converter code tables (below

and on the next page) to find the corresponding code for your

VCR or converter brand.

If more than one code is listed, try each one separately until you

find the one that works.

2. If you are programming the remote control to operate your:

• VCR: Set the TV/CABLE/VCR switch on the remote control

to “VCR.”

• Cable TV converter: Set the TV/CABLE/VCR switch on the

remote control to “CABLE.”

3. While holding down RECALL, press the CHANNEL

NUMBERS to enter the three-digit code for your VCR or

cable TV converter brand.

4. Point the remote control at the VCR or converter, and press

POWER to test the code.

• If the VCR or converter responds, you entered the correct

code.

• If the VCR or converter does not respond, repeat steps 1–4

using another code.

5. Set the TV/CABLE/VCR switch to “TV” to control the TV.

For future reference, write down the codes you used:

VCR code: _____________________

Cable TV converter code: _____________________

Using the

Remote Control

VCR code table (cont.)

Brand Code

KLH 091

Kodak 054, 056

Lloyd 019, 227

Logik 091

LXI 056

Magnavox 054, 058, 100, 129,

168

Magnin 259

Marantz 054, 100

Marta 056

Matsushita 054

MEI 054

Memorex 019, 054, 056, 058,

065, 066, 067, 123,

259

MGA 062, 080

MGN Technology 259

Minolta 061, 124

Mitsubishi 062, 080, 086, 094,

192, 233, 261

Motorola 054, 067

MTC 019, 259

Multitech 019, 091

NAD 077

NEC 057, 059, 060, 069,

086

Nikko 056

Noblex 259

Olympus 054

Optimus 056, 067, 077, 123

Optonica 081

Orion 498

Panasonic 054, 096, 181, 244,

473

Penney 054, 056, 057, 059,

061, 073, 259

Pentax 061, 084, 124

Philco 054

Philips 054, 081, 100, 129

Pilot 056

Pioneer 077, 086

Portland 039

Protec 091

Pulsar 058

Quarter 065

Quartz 065

Quasar 054, 096

Radio Shack 019, 056, 344

Radix 056

Randex 056

RCA 061, 079, 084, 096,

124, 125, 168, 221

Realistic 019, 054, 056, 065,

066, 067, 081, 085,

123, 259

Ricoh 053

Runco 058

Samsung 064, 259

Sanky 058, 067

Sansui 060, 086

Sanyo 065, 066, 123, 259

Scott 062, 064, 140, 203,

229, 230, 231

Sears 054, 056, 061, 065,

066, 073, 085, 123,

124

Sharp 067, 081

Shintom 091

Shogun 259

Singer 091

Sony 051, 052, 053, 054

STS 061

Sylvania 019, 054, 062, 100,

129

Symphonic 019, 344

Tatung 060

Teac 019, 060

Technics 054, 181

Teknika 019, 054, 056, 071

Telefunken 206

TMK 227, 259

Toshiba 062, 064, 085, 229,

231, 385

Totevision 056, 259

Unitech 259

Vector 064

Vector Research 057, 059

Video Concepts 059, 064, 080

Videosonic 259

Wards 019, 054, 061, 066,

067, 081, 091, 168,

231, 259

XR-1000 019, 054, 091

Yamaha 057

Zenith 052, 053, 058

Cable TV converter

code table

Brand Code

ABC 020, 022, 027, 030,

032, 033, 036, 066

Antronix 041

Archer 041, 058, 172

Belcor 075

Cable Star 075

Cabletenna 041

Cableview 041

Century 172

Citizen 172

Colour Voice 044, 050

Comtronics 059, 079

Contec 038

Dae Ryung 027

Eastern 021

Focus 419

Garrard 172

CG Electronics 075

Gemini 034, 089

General Instrument 030, 295

Gold Star 059, 163

Hamlin 028, 039, 053, 278,

292

Hitachi 030

Hytex 026

Jasco 172

Jerrold 022, 030, 031, 033,

034, 066, 295

Macom 052

Magnavox 046

Memorex 019

Movietime 175

NSC 089, 175

Oak 026, 038, 267

Panasonic 019, 040, 126

Paragon 019

Philips 044, 046, 047, 048,

049, 050, 172

Pioneer 042, 163, 552

Popular Mechanics 419

Pulsar 019

RCA 040

Regal 039, 278, 292

Recoton 419

Regency 021

Rembrandt 030, 089

Runco 019

Samsung 059, 163

Scientific Atlanta 025, 027, 036, 296

Signal 034, 059

Signature 030

SL Marx 059

Sprucer 040

Standard

Components 174

Starcom 022, 034, 066

Stargate 034, 059

Starquest 034

Sylvania 020

Teleview 059

Texscan 020

Tocom 031, 032, 078

Toshiba 019

Tusa 034

Unika 041, 172

United Artists 026

United Cable 022

Universal 041, 058, 075, 096,

172, 210

Viewstar 046, 079, 230

Zenith 019

Zentek 419

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

PIP CH

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

PLAY PIP

REC

STILL LOCATE SWAP

TV/VCR REW FF

STOP SOURCE

FAV

C.CAPT

EXIT

RESET

100

Channel Numbers

C.CAPT

(Closed Caption)

Reset

MUTE

TV/CABLE/VCR switch

LIGHT

PIP (or VCR) Buttons

EXIT

CH RTN (Channel Return)

TIMER

POWER

RECALL

TV/VIDEO

CH (Channel)

VOL

VOL (Volume)

CT-9946

FAV

Learning about the remote control

LIGHT illuminates the keys

RECALL displays on-screen

information (pages 21, 22)

TV/CABLE/VCR switch switches

among TV, Cable, and VCR inputs

(page 12)

POWER turns the TV on and off

MUTE turns off the sound (page 33)

TIMER sets the TV to turn off at a specific

time (page 31)

TV/VIDEO selects the signal input source

(page 17)

Channel yz cycles through

programmed channels (page 17)

Channel Numbers (0–9, 100) directly

tune channels (page 18)

VOL yz adjusts the volume level

CH RTN (Channel Return) returns to the

last viewed channel (page 19)

C.CAPT opens the Closed Caption menu (page 32)

MENU accesses on-screen menus (page 16)

yz x • (Up/Down/Left/Right Arrows) select or adjust

menu items when a menu is on-screen (page 17)

FAV zy (Left/Right Arrows) select channels you

programmed as favorite channels (page 19)

EXIT sets menu information and closes menus (page 23)

PIP Buttons access PIP functions when the TV/Cable/

VCR switch is set to TV (pages 28, 29)

PIP turns the PIP and Multi-Window feature on and off

(one press for 1/9-size PIP window; two presses for 1/16-size

PIP window; three presses for the Multi-Window feature)

SOURCE selects the PIP signal input source

PIP CH yz (Up/Down Arrows) select PIP channels (when PIP

is on-screen)

STILL freezes the PIP display

LOCATE changes the location of the PIP window

SWAP switches the main and PIP pictures

Note: When the TV/Cable/VCR switch is set to “VCR,” the PIP buttons

function instead as VCR buttons (STOP, PLAY, REC, TV/VCR, REW, FF; see

page 12).

Setting up

your TV

Setting up your TV

After installing the batteries and programming the remote control, you

will need to set some preferences on your TV using the menu system.

You can access the menus using the buttons on your TV or remote

control.

• When you make a menu selection, your changes occur immediately.

You do not have to press MENU or EXIT to save your changes.

Note: The TV front panel does not have an EXIT button.

• When you are finished programming the menus, you can press

EXIT to clear the on-screen display, or wait 15 seconds and the

on-screen display will disappear automatically. Your changes are

automatically saved either way.

Changing the on-screen display language

You can choose from three different languages (English, French, or

Spanish) for the on-screen display of menus and messages.

To select an on-screen display language:

1. Press MENU .

2. Press

x or • until the SET UP menu appears.

3. Press

y or z to highlight LANGUAGE.

4. Press

x or • to highlight your desired language.

MOVE SELECT

[

]

[

]

LANGUAGE:

ANT1/2:

TV/CABLE:

CH PROGRAM

ADD/ERASE:

[ENGLISH]

FRANCAIS ESPANOL

[ANT1] ANT2

[TV] CABLE

[ADD] ERASE

SET UP

BOUGER CHOISIR

[

]

[

]

LANGUE:

ANT1/2:

TV/CABLE:

PROGRAMME CAN

ADD/EFF:

ENGLISH

[FRANCAIS] ESPANOL

[ANT1] ANT2

[TV] CABLE

[ADD] EFF

CONFIGURE

Selecting the antenna input

You can connect to one of two different antenna input sources

(ANT 1 or ANT 2).

To select the antenna input:

1. Press MENU.

2. Press

x or • to highlight the SET UP menu.

3. Press

y or z to highlight ANT 1/2.

4. Press

x or • to highlight either ANT 1 or ANT 2, depending on

the antenna terminal you wish to use.

MOVE SELECT

[

]

[

]

LANGUAGE:

ANT1/2:

TV/CABLE:

CH PROGRAM

ADD/ERASE:

[ENGLISH]

FRANCAIS ESPANOL

[ANT1] ANT2

[TV] CABLE

[ADD] ERASE

SET UP

yzx •

TV Front Panel

MENU TV / VIDEO VOLUME CHANNEL POWER

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

EXIT

VOL

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

Selecting the signal source

Use the TV/VIDEO button on the remote control or TV to monitor or

change the signal source connected to your TV.

To monitor the signal source:

Press TV/VIDEO once. The current signal source displays in green.

To change the signal source:

Repeatedly press TV/VIDEO to select either VIDEO 1, VIDEO 2,

VIDEO 3, ColorStream, ANT 1, or ANT 2. The selected signal

source displays in green.

TO SELECT PUSH TV/VIDEO

VIDEO 1

VIDEO 2 ANT 1

VIDEO 3

ColorStream ANT 2

Watching video input

To view a signal from other devices connected to your TV

(such as a VCR or DVD player):

Repeatedly press TV/VIDEO on the remote control or TV to select

either VIDEO 1, VIDEO 2, VIDEO 3, or ColorStream. (For device

connection information, see “Connecting your TV” on page 7).

Programming channels into the TV’s memory

When you press CHANNEL ▲▼ on the TV or remote control,

the TV stops only on the channels stored in the TV’s memory.

Note: To tune the TV to a channel not programmed into the memory,

use the CHANNEL NUMBERS on the remote control.

Follow the steps below and on the next page to program channels into

the TV’s memory.

Programming channels automatically

Your TV can automatically detect all active channels in your area and

store them in the TV’s memory. After the channels are stored automati-

cally, you can manually add or erase individual channels (see page 18).

If you use both ANT-1 and ANT-2 terminals, you will need to program

channels for each signal source.

To program channels automatically:

1. Press MENU.

2. Press

x or • to highlight the SET UP menu.

3. Press

y or z to highlight TV/CABLE.

4. Press

x or • to highlight TV (if you use an antenna) or CABLE (if

you use cable).

5. Press

z to highlight CH PROGRAM.

MOVE SELECT

[

]

[

]

LANGUAGE:

ANT1/2:

TV/CABLE:

CH PROGRAM

ADD/ERASE:

[ENGLISH]

FRANCAIS ESPANOL

[ANT1] ANT2

[TV] CABLE

[ADD] ERASE

SET UP

MOVE SELECT

[

]

[

]

LANGUAGE:

ANT1/2:

TV/CABLE:

CH PROGRAM

ADD/ERASE:

[ENGLISH]

FRANCAIS ESPANOL

[ANT1] ANT2

[TV] CABLE

[ADD] ERASE

SET UP

(Continued on next page)

yzx •

TV/VIDEO

CHANNEL

MENU TV / VIDEO VOLUME CHANNEL POWER

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

Channel

Numbers

TV/VIDEO

CH (Channel)

VOL

Setting up

your TV

6. Press x or • to start automatic channel programming (“CH

PROGRAM” displays on-screen). The TV automatically cycles

through every TV or cable channel (depending on which you

selected), and stores all active channels in the TV’s memory.

7. When automatic channel programming is complete, the message

“CH Programming Completed” appears.

8. Press CHANNEL

▲▼ to view the programmed channels.

Adding and erasing channels manually

After you have automatically programmed the channels into the TV’s

memory, you can manually add and erase individual channels.

To add a channel to or erase a channel from the TV’s memory:

1. Tune the TV to the channel you want to add or erase. If you are

adding a channel, you will need to use the CHANNEL

NUMBERS to select the channel.

2. Press MENU.

3. Press

x or • to highlight the SET UP menu.

4. Press

y or z to highlight ADD/ERASE.

MOVE SELECT

[

]

[

]

LANGUAGE:

ANT1/2:

TV/CABLE:

CH PROGRAM

ADD/ERASE:

[ENGLISH]

FRANCAIS ESPANOL

[ANT1] ANT2

[TV] CABLE

[ADD] ERASE

SET UP

5. Press x or • to highlight ADD or ERASE, whichever function

you want to perform.

6. Press MENU.

7. Repeat steps 1–6 for other channels you want to add or erase,

or press EXIT to return to normal TV viewing.

Changing channels

To change to the next programmed channel:

Press CHANNEL

yz.

To change to a specific channel (programmed or unprogrammed):

Press the CHANNEL NUMBERS (0–9 and 100).

Note: For channels 100 and higher, press the 100 button, and

then the next two channel numbers (for example, to select

channel 100, press 100, 0, 0; to select channel 125, press

100, 2, 5).

yzx •

CHANNEL

MENU TV / VIDEO VOLUME CHANNEL POWER

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

Channel

Numbers

CH (Channel)

VOL

EXIT

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

Using the TV’s features

Adjusting the channel settings

Switching between two channels

You can switch between two channels without entering an actual

channel number each time.

To switch between two channels:

1. Select the first channel you want to view.

2. Select a second channel using the CHANNEL NUMBERS

(0–9 and 100).

3. Press CH RTN (channel return). The previous channel will

display.

Every time you press CH RTN, the TV will switch back and forth

between the last two channels you tuned the TV to.

Programming your favorite channels

The Favorite Channel feature allows you to use the FAV ▼▲ buttons

on the remote control to cycle through your favorite channels,

skipping over channels you do not normally watch. You can program

a maximum of 12 favorite channels.

Note: You can still use CHANNEL

▲▼ to cycle through all the

channels you previously programmed into the TV’s memory (see

“Adding channels to the TV’s memory” on page 17).

To program your favorite channels:

1. Tune the TV to a channel you want to program as a favorite

channel.

2. Press MENU.

3. Press

x or • to highlight the SET UP menu.

4. Press

y or z to highlight FAVORITE CH.

MOVE

[

]

[

]

V-CHIP CONTROL

FAVORITE CH

CH LABEL

VIDEO LABEL

TIMER: 0 MIN

DEMO: START [STOP]

SET UP

START

5. Press x or • to display the FAVORITE CH menu. SET/CLEAR

will be highlighted.

6. Press

x or • to highlight SET.

7. Press

z to add the current channel to the list.

8. Press MENU.

SELECT

[

] [

]

FAVORITE CH

[SET] CLEAR

256

0000

[TV: CYAN, CABLE: BLUE]

SET UP

SET

9. Repeat steps 1–8 for up to 12 channels, or press EXIT to close

the menu.

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

Channel

Numbers

VOL

EXIT

CH RTN

FAV

CH (Channel)

Using the TV’s

Features

Note:

The FAV

zy buttons function as menu x•

buttons when a menu is on-screen.

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

VOL

EXIT

FAV

To select your favorite channels:

Press FAV

zy on the remote control to cycle through the favorite

channels you programmed.

Note: The FAV

zy buttons will not work unless you program at

least one favorite channel.

To clear a favorite channel:

1. Tune the TV to the channel you want to clear from your favorite

channel list.

2. Press MENU.

3. Press

x or • to highlight the SET UP menu.

4. Press

y or z to highlight FAVORITE CH.

5. Press

x or • to display the FAVORITE CH menu. SET/CLEAR

will be highlighted.

6. Press

x or • to highlight CLEAR.

SELECT

[

] [

]

FAVORITE CH

SET [CLEAR]

256

0000

[TV: CYAN, CABLE: BLUE]

SET UP

CLEAR

7. Press z to clear the current channel number from the list.

8. Press MENU.

10. Repeat steps 1–8 for other channels you want to clear from your

favorite channel list, or press EXIT to close the menu.

Using the V-Chip Control (blocking) feature

You can use the V-Chip Control feature to block certain programs or

channels, to prevent others from viewing them.

Selecting a PIN code

Before you can block programs or channels, you must select a personal

identification number (PIN) code. Your PIN code allows you to access

the V-Chip Control menu, and prevents others from changing the

rating and blocking limits you set.

To select your PIN code and access the V-Chip Control menu:

1. Press MENU.

2. Press

x or • to highlight the SET UP menu.

3. Press

y or z to highlight V-CHIP CONTROL.

4. Press

x or • to display the “Enter PIN Code” screen.

MOVE

[

]

[

]

V-CHIP CONTROL

FAVORITE CH

CH LABEL

VIDEO LABEL

TIMER: 0 MIN

DEMO: START [STOP]

SET UP

START

SELECT [0–9] END [EXIT]

BLOCKING IS ACTIVE

PLEASE ENTER PIN CODE

_ _ _ _

SET UP

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

Note:

If you forget your PIN code:

• Follow steps 1–4 under “Changing your PIN

code” at left.

• Then press RECALL four times within five

seconds.

This allows you to proceed to the V-Chip

Control menu and reset your PIN code.

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

Channel

Numbers

VOL

RECALL

EXIT

5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit

PIN code. After the code is entered, the V-Chip Control menu

appears.

MOVE

[

]

[

]

ENABLE BLOCKING [Y] N

SET RATING

SET BLOCKING OPTIONS

NEW PIN CODE

BLOCK CHANNEL

VIDEO LOCK OFF

SET UP

SELECT

V-Chip Control (Blocking) Menu

6. Press y or z to highlight ENABLE BLOCKING.

7. Press

x or • to highlight “Y,” which enables all blocking by

activating the V-Chip. See “Blocking programs by ratings” on

page 22, “Blocking unrated movies or programs” on page 23,

and “Blocking channels” on page 24.

(Note: Highlight “N” to deactivate the V-Chip Control feature

and disable blocking.)

Changing your PIN code

1. Press MENU.

2. Press

x or • to highlight the SET UP menu.

3. Press

y or z to highlight V-CHIP CONTROL.

4. Press

x or • to display the Enter PIN Code screen.

5. Use the Channel Number buttons (0–9) to enter your existing

PIN code. After the code is entered, the V-Chip Control menu

appears.

6. Press

y or z to highlight NEW PIN CODE.

7. Press

x or • to display the New PIN Code screen.

MOVE

[

]

[

]

ENABLE BLOCKING [Y] N

SET RATING

SET BLOCKING OPTIONS

NEW PIN CODE

BLOCK CHANNEL

VIDEO LOCK OFF

SET UP

SELECT

SELECT [0–9] END [EXIT]

PLEASE ENTER NEW PIN CODE

_ _ _ _

SET UP

8. Use the CHANNEL NUMBERS (0–9) to enter a new PIN

code. After the new code is entered, the V-Chip Control menu

appears.

9. Press EXIT to return to normal TV viewing.

Using the TV’s

Features

Note:

Press RECALL to see the rating of the program

you are viewing. Not all programs are rated,

however. To block programs or movies that are

not rated, see “Blocking unrated movies and

programs” on page 23.

Blocking programs by ratings

The Motion Picture Association of America (MPAA) uses a rating

system to qualify motion picture content. Television broadcasters

employ a similar rating system to qualify the content of television

programs. The MPAA, Youth TV, and TV ratings work with the

V-Chip feature to allow you to block access to programs that exceed

the rating limits you set.

MPAA Ratings

X For adults only.

NC17 Not intended for anyone 17 or under.

R Restricted. Under 17 requires an accompanying

parent or adult guardian.

PG13 Parents strongly cautioned. Some material may

not be appropriate for children under 13.

PG Parental guidance suggested. Some material

may not be appropriate for children.

G General audience. Appropriate for all ages.

Youth TV Ratings

Y7, Y7FV Directed to older children. Programs rated Y7

are designed for children 7 and above.

Programs rated Y7FV contain fantasy violence

that may be more intense or combative than

Y7-rated programs.

Y For all children. Programs rated Y are designed

to be appropriate for all children.

TV Ratings

MA Mature audience only. This program is specifically

designed to be viewed by adults and therefore

may be unsuitable for children under 17.

Dialog Intensely suggestive dialog

Language Crude or indecent language

Sex Explicit sexual activity

Violence Graphic violence

14 Parents strongly cautioned. This program contains

some material that many parents would find

unsuitable for children under 14 years of age.

Dialog Frequent suggestive dialog

Language Frequent coarse language

Sex Intense sexual situations

Violence Intense violence

PG Parental guidance suggested. This program

contains material that parents may find unsuitable

for younger children.

Dialog Some suggestive dialog

Language Occasional coarse language

Sex Some sexual situations

Violence Moderate violence

G General audience. Most parents would find this

program suitable for all ages.

No DLSV Programs without any Dialog, Language, Sex, or

Violence ratings.

Ratings definitions

To block programs by rating:

1. Press MENU.

2. Press

x or • to highlight the SET UP menu.

3. Press

y or z to highlight V-CHIP CONTROL.

4. Press

x or • to display the “Enter PIN Code” screen.

5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit PIN

code. After the code is entered, the V-Chip Control menu appears.

6. Press

y or z to highlight ENABLE BLOCKING.

7. Press

x or • to highlight “Y,” which enables all blocking by activating

the V-Chip. (Note: Highlight “N” to deactivate the V-Chip Control

feature and disable blocking.)

MOVE

[

]

[

]

ENABLE BLOCKING [Y] N

SET RATING

SET BLOCKING OPTIONS

NEW PIN CODE

BLOCK CHANNEL

VIDEO LOCK OFF

SET UP

SELECT

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

Channel

Numbers

VOL

RECALL

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

8. Press y or z to highlight SET RATING.

9. Press

x or • to display the Set Rating menu.

10. Press

y or z to highlight MPAA Rating, Youth TV Rating, or

TV Rating.

11. Press

• to select (or x to deselect) the ratings to be blocked.

Blocked ratings will be marked with “x”; unblocked ratings will

will be marked with “✔.” All ratings higher than the ones that are

selected (“x”) are blocked as well. For example, if you block the

MPAA rating R, programs with the higher ratings NC17 and X

will also be blocked.

MPAA RATING:

X NC17 R PG13 PG G

YOUTH TV RATING:

Y7FV Y7

TV RATING

MOVE

[

]

[

]

SET UP

SELECT

MOVE

[

]

[

]

SET UP

SELECT

MA 14 PG G

DIALOG:

LANGUAGE:

SEX:

VIOLENCE:

NO DLSV:

BACK TO V-CHIP MENU

TV RATING:

12. When you finish selecting the program ratings to be blocked:

• To return to the V-Chip menu, press

y or z to highlight

BACK TO V-CHIP MENU, and then press

x or •.

• To return to normal TV viewing, press EXIT.

Unblocking programs temporarily

When you try to view a program with a ratings block, a message

appears stating that the program has been blocked because the

program’s rating exceeds the set limits. To temporarily override the

block and view the program, press MUTE and enter your PIN code.

To reset your original ratings blocks, turn the TV off and then on

again.

THIS PROGRAM HAS BEEN BLOCKED

TV-PG L V

EXCEEDS SET LIMITS

PUSH MUTE TO ENTER PIN

SELECT [0–9] END [EXIT]

BLOCKING IS ACTIVE

PLEASE ENTER PIN CODE

TO TEMPORARILY UN-BLOCK

_ _ _ _

Blocking unrated movies and programs

Some movies and programs are not rated. You can use the V-Chip

Control feature to block unrated movies and programs.

To block unrated movies and programs:

1. Press MENU.

2. Press

x or • to highlight the SET UP menu.

3. Press

y or z to highlight V-CHIP CONTROL.

4. Press

x or • to display the Enter PIN Code screen.

5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit

PIN code. After entering the code, the V-Chip Control menu

appears.

6. Press

y or z to highlight ENABLE BLOCKING.

(Continued on next page)

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

EXIT

VOL

MUTE

Using the TV’s

Features

Note:

After programming CHANNEL BLOCK, tune

the TV to a channel that is not blocked before

turning the TV off.

Caution:

Blocking unrated television programs (those

rated “TV NONE”) may block emergency

messages.

7. Press x or • to highlight “Y,” which enables all blocking by

activating the V-Chip. (Note: Highlight “N” to deactivate the

V-Chip feature and disable blocking.)

8. Press

y or z to highlight SET BLOCKING OPTIONS.

9. Press

x or • to display the unrated movie/program blocking menu.

10. Press

y or z to highlight BLOCK TV NONE RATING.

11. Press

x or • to highlight “Y” to block movies/programs rated

“TV None.” (Note: Highlight “N” to unblock unrated programs.)

12. Press EXIT to return to normal TV viewing.

MOVE

[

]

[

]

ENABLE BLOCKING [Y] N

SET RATING

SET BLOCKING OPTIONS

NEW PIN CODE

BLOCK CHANNEL

VIDEO LOCK OFF

SET UP

SELECT

MOVE

[

]

[

]

BLOCK MPAA UNRATED: [Y] N

BLOCK TV NONE RATING: [Y] N

BACK TO V-CHIP MENU

SET UP

SELECT

NOTICE: ENABLING THIS OPTION

MAY BLOCK EMERGENCY

MESSAGES

Blocking channels

You can block a maximum of four TV channels and four cable

channels. Blocked channels cannot be viewed, regardless of their

ratings. If you try to tune the TV to a blocked channel, the nearest

unblocked channel will display.

To block a channel:

1. Tune the TV to the channel you want to block.

2. Press MENU.

3. Press

x or • to highlight the SET UP menu.

4. Press

y or z to highlight V-CHIP CONTROL.

5. Press

x or • to display the Enter PIN Code screen.

6. Use the CHANNEL NUMBERS (0–9) to enter your four-digit

PIN code. After entering the code, the V-Chip Control menu

appears.

7. Press

y or z to highlight ENABLE BLOCKING.

8. Press

x or • to highlight “Y,” which enables all blocking by

activating the V-Chip Control feature. (Note: Highlight “N” to

deactivate the V-Chip feature and disable blocking.)

9. Press

y or z to highlight BLOCK CHANNEL.

10. Press

x or • to display the BLOCK CHANNEL menu.

SET/CLEAR will be highlighted.

11. Press

x or • to highlight SET.

12. Press

z to add the current channel to the list.

SELECT

[

] [

]

BLOCK CHANNEL

[SET]

CLEAR

000

SET UP

SET

END [EXIT]

13. Press MENU.

14. Press EXIT.

15. Repeat steps 1–14 to block additional channels.

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

Channel

Numbers

VOL

EXIT

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

To unblock all blocked channels:

Note: This will unblock every channel you have blocked. You cannot

unblock individual channels.

1. Press MENU.

2. Press

x or • to highlight the SET UP menu.

3. Press

y or z to highlight V-CHIP CONTROL.

4. Press

x or • to display the Enter PIN Code screen.

5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit

PIN code. After entering the code, the V-Chip Control menu

appears.

6. Press

y or z to highlight BLOCK CHANNEL.

7. Press

x or • to display the BLOCK CHANNEL menu.

SET/CLEAR will be highlighted.

8. Press

x or • to highlight CLEAR.

9. Press

z to clear all blocked channels from the list.

10. Press MENU.

11. Press EXIT to return to normal TV viewing.

Locking video inputs

You can use the Video Lock feature to block the input sources

(Video 1, Video 2, Video 3, and ColorStream) and channels 3 and 4.

Note: The Video Lock feature is independent of the Enable Blocking

option of V-Chip control (page 21).

The Video Lock options are:

Video: Blocks Video 1, Video 2, Video 3, and ColorStream.

Video+: Blocks Video 1, Video 2, Video 3, ColorStream, and

channels 3 and 4.

Off: Disables the Video Lock feature.

To set up video lock:

1. Press MENU.

2. Press

x or • to highlight the SET UP menu.

3. Press

y or z to highlight V-CHIP CONTROL.

4. Press

x or • to display the Enter PIN Code screen.

5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit

PIN code. After entering the code, the V-Chip Control menu

appears.

6. Press

y or z to highlight VIDEO LOCK.

7. Press

x or • to select the desired level of video locking (Video,

Video+, or Off).

MOVE

[

]

[

]

ENABLE BLOCKING [Y] N

SET RATING

SET BLOCKING OPTIONS

NEW PIN CODE

BLOCK CHANNEL

VIDEO LOCK VIDEO VIDEO+ [OFF]

SET UP

SELECT

8. Press EXIT to return to normal TV viewing.

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

Channel

Numbers

VOL

EXIT

Note:

In normal TV viewing, if you cannot access the

input sources (Video 1, Video 2, Video 3, and

ColorStream) or channels 3 and 4, check the

Video Lock setting and highlight OFF if

necessary.

Using the TV’s

Features

Channel labels

You can assign labels to a maximum of 32 channels. Each channel

label can have a maximum of four characters.

For example, if channel 8 is your public television station, you could

create the label “PBS” for that channel. The label “PBS” would then

appear on-screen when you tune the TV to channel 8.

Channel labels appear on-screen above the channel number every time

you turn the TV on, change the channel, or press RECALL.

To create a channel label:

1. Tune the TV to the channel you want to label.

2. Press MENU.

3. Press

x or • to highlight the SET UP menu.

4. Press

y or z to highlight CH LABEL.

MOVE

[

]

[

]

V-CHIP CONTROL

FAVORITE CH

CH LABEL

VIDEO LABEL

TIMER: 0 MIN

DEMO: START [STOP]

SET UP

START

5. Press x or • to display the CH LABEL menu. SET/CLEAR will

be highlighted.

6. Press

x or • to highlight SET.

7. Press

z to highlight LABEL.

MOVE

[

]

[

]

CH LABEL

SET/CLEAR [SET] CLEAR

LABEL

_ _ _ _

SET UP MENU

SET UP

SELECT

MOVE

[

]

[

]

CH LABEL

SET/CLEAR [SET] CLEAR

LABEL

_ _ _ _

SET UP MENU

SET UP

SELECT

SET [ENT]

8. Press x or • repeatedly to scan through the list of available

characters until the desired character appears in the first space.

9. Press MENU.

10. Repeat steps 8 and 9 to enter the rest of the characters.

Note: For a blank space in the label name, you must choose a

blank space from the list of characters; otherwise, a dash will

appear in the space.

11. Repeat steps 1–10 for up to 32 channels.

12. Press EXIT to return to normal TV viewing.

To erase a channel label:

1. Select the channel whose label you want to erase.

2. Press MENU.

3. Press

x or • to highlight the SET UP menu.

4. Press

y or z to highlight CH LABEL.

5. Press

x or • to display the CH LABEL menu. SET/CLEAR will

be highlighted.

6. Press

x or • to highlight CLEAR.

7. Press MENU.

8. Repeat steps 1–7 to erase other channel labels, or press EXIT to

return to normal TV viewing.

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

Channel

Numbers

VOL

RECALL

EXIT

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

Video labels

The Video Label feature allows you to label each input source for your

TV, from the following preset list of labels:

–: Uses the default label name

VCR: Video cassette recorder

DVD: Digital video disc or digital versatile disc

DTV: Digital TV set-top box

SAT: Satellite box

CBL: Cable box

To set up video labels:

1. Press MENU.

2. Press

x or • to highlight the SET UP menu.

3. Press

y or z to highlight VIDEO LABEL.

4. Press

x or • to display the Video Label screen.

5. Press

y or z to highlight the input source to be labeled

(VIDEO 1, VIDEO 2, VIDEO 3, or ColorStream).

6. Press

x or • to select the desired label for that input source.

MOVE

[

]

[

]

VIDEO LABEL

VIDEO1 – VCR

DVD

DTV

[SAT]

CBL

VIDEO2 –

VIDEO3 –

ColorStream

–

SET UP MENU

SET UP

SELECT

7. Repeat steps 1–6 to label the other input sources.

8. When you finish setting up video labels:

• To return to the previous menu, press

y or z to highlight

SET UP MENU, and then press

x or •.

• To return to normal TV viewing, press EXIT.

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

EXIT

VOL

Using the TV’s

Features

Watching picture-in-picture (PIP)

The picture-in-picture (PIP) feature allows you to watch two pictures

at the same time. The small PIP window can display a signal from a

TV broadcast or an external source, such as a VCR.

To display a TV broadcast in the PIP window:

1. Tune the TV to the program you want to watch in the main

window.

2. Press PIP to display a small picture (one press displays a PIP

window 1/9 the size of the screen; two presses display a 1/16-size

window).

1/9

PIP

1/16

3. Press PIP CH yz to change the PIP channel. Press Channel yz

to change the main channel.

To display an external source in the PIP window:

1. Connect the external equipment to the ANT-1 connection on

the TV.

Note: An ANT-2 source will not display as a PIP. For connection

information, see “Connecting your TV” on page 7.

2. Turn on the TV and select the program/source you want to watch

in the main window.

3. Press PIP (one press to display a PIP window 1/9 the size of the

screen; two presses to display a 1/16-size window).

4. Press SOURCE to select the PIP input source (TV, VIDEO 1,

VIDEO 2, or VIDEO 3). The current source will display

on-screen in green.

TO SELECT PUSH SOURCE

PIP

VIDEO1

VIDEO2

VIDEO3

To turn PIP off:

Press PIP two or three times, depending on the PIP window size

you selected.

Switching the main and small pictures

With the TV in PIP mode, repeatedly press SWAP to switch the

main and small pictures back and forth.

Note:

The PIP window will not open when a

ColorStream (component video) source is

being viewed.

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

PLAY PIP

REC

STILL LOCATE SWAP

TV/VCR REW FF

STOP SOURCE

FAV

C.CAPT

EXIT

RESET

100

SWAP

CH (Channel)

VOL

PIP CH

CT-9946

SOURCE

PIP

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

Changing the location of the PIP window

With the TV in PIP mode, press LOCATE to change the location of

the PIP window on-screen. Every time you press LOCATE, the PIP

window changes position counter-clockwise.

Freezing the PIP display

With the TV in PIP mode, press STILL to freeze the PIP display. The

PIP picture becomes still, and is outlined in red on-screen. Press

STILL again to restore the moving picture (outlined in green).

Still

Watching multi-window PIP

Multi-window PIP appears as six small boxes across the bottom of the

screen. The multi-window PIP displays only the channels you

programmed into the TV’s memory (see “Adding channels to the TV’s

memory” on page 17).

Note: The LOCATE, SWAP, PIP CHANNEL

yz, SOURCE,

and STILL buttons do not function in multi-window PIP mode.

To view multi-window PIP:

Press PIP three times.

The TV cycles through all of the programmed channels, showing a

few seconds of each channel’s programming, and then freezes the

image and moves on to the next channel in a continuous cycle. The

channel number appears above each PIP window.

14 23 27 30 43 56

To turn multi-window PIP off:

Press PIP again, or change the channel.

Note:

Multi-window PIP displays channels

programmed for the signal source you are

currently viewing (ANT-1 or Cable).

ADV/

PIP CH

ADV/

PIP CH

ENTER

PLAY PIP

REC

STILL LOCATE SWAP

TV/VCR REW FF

STOP SOURCE

FAV

C.CAPT

EXIT

RESET

SWAP

PIP CH

CT-9946

SOURCE

PIP

STILL

LOCATE

Note:

If V-Chip blocking is enabled when

you view multi-window PIP, channels

exceeding the rating limits will appear

as a black window with a red “X.”

Using the TV’s

Features

Adjusting the picture

Adjusting the picture quality

You can adjust the picture’s contrast, brightness, sharpness, color, and

tint. Your picture quality adjustments are stored automatically in the

TV’s memory. You can keep these settings or choose preset options in

the PREFERENCE menu (see “Selecting the color temperature”

below, and “Adjusting the picture preference” on the next page.)

To adjust the picture quality:

1. Press MENU.

2. Press

x or • to highlight the PICTURE menu.

3. Press

y or z until the quality you want to adjust is highlighted.

MOVE

[

]

[

]

CONTRAST 50

BRIGHTNESS 50

SHARPNESS 50

COLOR 50

TINT 0

RESET

PICTURE

ADJUST

–

4. Press x or • to adjust the level, as described in the following table:

Selection Pressing

Contrast Lower Higher

Brightness Darker Lighter

Sharpness Softer Sharper

Color Paler Deeper

Tint Reddish Greenish

Selecting the color temperature

You can change the picture quality by selecting from three preset color

temperatures—cool, medium, and warm—as described in the

following table:

Mode Picture Quality

Cool Blueish

Medium Neutral

Warm Reddish

To select the color temperature:

1. Press MENU.

2. Press

x or • to highlight the PREFERENCE menu.

3. Press

y or z to highlight COLOR TEMPERATURE.

4. Press

x or • to highlight the mode you prefer.

MOVE

[

]

[

]

COLOR TEMPERATURE

[COOL] MEDIUM WARM

PICTURE PREFERENCE

[SPORTS] STANDARD MOVIE MEMORY

PREFERENCE

SELECT

Note:

To reset the picture (and audio)

adjustments to the factory settings,

select RESET in the PICTURE menu.

yzx •

MENU TV / VIDEO VOLUME CHANNEL POWER

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

VOL

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

Adjusting the picture preference

You can select four picture modes—Sports, Standard, Movie, and

Memory—as described in the following table:

Mode Picture Quality

Sports Bright and dynamic picture (factory-set)

Standard Standard picture quality (factory-set)

Movie Movie-like picture setting (factory-set)

Memory Your personal preferences (set by you; see

“Adjusting the picture quality” on page 30.)

To select your picture preference:

1. Press MENU.

2. Press

x or • to highlight the PREFERENCE menu.

3. Press

y or z to highlight PICTURE PREFERENCE.

4. Press

x or • to highlight the mode you prefer.

MOVE

[

]

[

]

COLOR TEMPERATURE

[COOL] MEDIUM WARM

PICTURE PREFERENCE

[SPORTS] STANDARD MOVIE MEMORY

PREFERENCE

SELECT

Displaying on-screen information

Press RECALL to display the following information on-screen:

• Antenna mode (when in TV mode)

• Channel number or video mode

• Channel label (if set)

• Audio status (stereo or SAP)

• Rating of current program (if rated)

Setting the off timer

The off timer turns the TV off automatically.

To set the off timer:

1. Press TIMER.

2. Press

• to increase (or x to decrease) the amount of time until the

TV turns off automatically (in 10-minute increments, to a

maximum of 180).

3. Press EXIT to exit the menu and return to normal TV viewing.

To cancel the off timer:

Set the off timer to 0 (zero) minutes in step 2 above, or turn the

TV off and then on again.

Auto power off

The TV turns itself off automatically after approximately 15 minutes if

it is tuned to a vacant channel or a station that stops broadcasting for

the day.

Note: The auto power off feature does not work in VIDEO mode.

yzx •

MENU TV / VIDEO VOLUME CHANNEL POWER

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

EXIT

TIMER

RECALL

VOL

Using the TV’s

Features

Using the closed caption feature

The Closed Caption feature has two options:

• Captions—An on-screen display of the dialogue, narration, and

sound effects of programs and videos that are closed-captioned

(usually identified in your local TV listing as “CC”).

• Text—An on-screen display of information not related to the

program, such as weather or stock data (if available in your

viewing area).

To view captions or text:

1. Tune the TV to the desired program.

2. Press C.CAPT (or press MENU, and then press

x or • to

highlight the CLOSED CAPTION menu).

3. Press

y or z to highlight CC.

MOVE

[

]

[

]

CC: C1 C2 C3 C4 T1

T2 T3 T4 [OFF]

CLOSED CAPTI0N

SELECT

4. Press x or • to select the desired Closed Caption mode, as

follows:

• To view captions, select C1, C2, C3, or C4 (C1 displays

translation of the primary language in your area). Note: If the

program or video you selected is not closed-captioned, no

captions will display on the screen.

The top of the mountain is covered

with snow all the year round.

• To view text, select T1, T2, T3, or T4. Note: If text is not

available in your viewing area, a black rectangle may appear on

your screen. If this occurs, turn the Closed Caption feature off.

WORLD WEATHER

LONDON

MOSCOW

PARIS

ROME

TOKYO

Temps

Current

Weather

Clear

Cloudy

Clear

Cloudy

Rain

• To turn the Closed Caption feature off, highlight OFF in the

Closed Caption menu.

Note:

A closed caption signal may not display in the

following situations:

• When a videotape has been dubbed

• When the signal reception is weak

• When the signal reception is non-

standard

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

VOL

C.CAPT

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

Adjusting the sound

Muting the sound

Press MUTE to temporarily turn off the sound. While the sound is off,

the screen displays the word “MUTE” in the lower /right corner. To

restore the sound, press MUTE or VOLUME

yz.

When you press MUTE, the Closed Caption feature is automatically

activated. To deactivate captions and restore normal sound, press

MUTE again. This feature works only when the Closed Caption mode

is set to OFF. See “Using the closed captioned feature” on page 40 for

more information about closed caption settings.

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature provides high-fidelity

stereo sound. MTS also can transmit a second audio program (SAP)

containing a second language or other audio information.

Note: The MTS feature is not available in VIDEO mode.

In general, you can leave your TV in stereo mode because the TV

automatically outputs either stereo or monaural (“mono”) sound,

depending on the broadcast type.

When the TV receives a stereo or SAP broadcast, the word “STEREO”

or “SAP” displays on the screen every time you turn the TV on,

change the channel, or press RECALL.

To listen to stereo sound:

1. Press MENU.

2. Press

x or • to highlight the AUDIO menu.

3. Press

y or z to highlight MTS.

4. Press

x or • to highlight STR (stereo).

Note: If the stereo sound is noisy, select MONO to reduce the

noise.

MOVE

[

]

[

]

AUDIO

SELECT

MTS: [STR] SAP MONO

BASS 50

TREBLE 50

BALANCE 0

SURROUND: [ON] OFF

AUDIO OUT: [FIX] VARIABLE

To listen to a second audio program (SAP):

1. Press MENU.

2. Press

x or • to highlight the AUDIO menu.

3. Press

y or z to highlight MTS.

4. Press

x or • to highlight SAP. The TV speakers will output only

the second audio program.

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

RECALL

MUTE

VOL

Using the TV’s

Features

Adjusting the sound quality

You can change the sound quality of your TV by adjusting the bass,

treble, and balance.

To adjust the sound quality:

1. Press MENU.

2. Press

x or • to highlight the AUDIO menu.

3. Press

y or z to highlight the quality you want to adjust.

4. Press

x or • to adjust the level:

•

x makes the sound quality weaker or decreases the balance in

the right channel, depending on the item selected.

• • makes the sound quality stronger or decreases the balance in

the left channel, depending on the item selected.

–

MOVE

[

][

]

AUDIO

ADJUST

MTS: [STR] SAP MONO

BASS 50

TREBLE 50

BALANCE 0

SURROUND: [ON] OFF

AUDIO OUT: [FIX] VARIABLE

Using the surround sound feature

The surround sound feature expands the audio listening field wider and

deeper to create exceptional sound quality from the TV speakers.

This feature uses stereo signals from a TV broadcast or video input.

To turn the surround sound feature on:

1. Press MENU.

2. Press

x or • to highlight the AUDIO menu.

3. If you have not already done so, select STEREO mode (press

y or

z to highlight MTS, and then press x or • to highlight STR).

4. Press

y or z to highlight SURROUND.

5. Press x or • to highlight ON.

MOVE

[

]

[

]

AUDIO

SELECT

MTS: [STR] SAP MONO

BASS 50

TREBLE 50

BALANCE 0

SURROUND:

[ON] OFF

AUDIO OUT: [FIX] VARIABLE

To turn the surround sound feature off:

Highlight OFF in step 5 above. Note: In general, you can leave the

surround sound feature on because it automatically outputs surround

stereo or monaural sound, depending on the broadcast or video type.

Note:

To reset the audio adjustments (bass, treble,

and balance) to the factory settings, select

RESET in the PICTURE menu (see page 30).

yzx •

MENU TV / VIDEO VOLUME CHANNEL POWER

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

VOL

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

Selecting variable audio OUT

If you connect external audio equipment (such as a stereo

audio amplifier or surround sound system) to the TV’s Audio OUT

jack, you can use the AUDIO OUT feature to select either variable or

fixed audio output.

– If you set AUDIO OUT to VARIABLE, you can use the volume

controls on either the TV or the audio equipment to adjust the

sound level coming through the audio equipment.

– If you set AUDIO OUT to FIX, you must use the volume controls

on the audio equipment to adjust the sound level coming through

the audio equipment (the TV’s volume setting will have no effect).

Note: Fixed audio output provides a cleaner signal than variable audio

output.

See page 11 for details on connecting an audio amplifier to the TV’s

Audio OUT jack.

To select variable audio output:

1. Press MENU.

2. Press

x or • to highlight the AUDIO menu.

3. Press

y or z to highlight AUDIO OUT.

4. Press

x or • to highlight VARIABLE.

MOVE

[

]

[

]

AUDIO

SELECT

MTS: [STR] SAP MONO

BASS 50

TREBLE 50

BALANCE 0

SURROUND: [ON] OFF

AUDIO OUT:

FIX [VARIABLE]

To select fixed audio output:

1. Highlight FIX in step 4 above.

Turning off the built-in speakers

Use this feature to turn off the TV’s built-in speakers when you

connect external speakers to your TV (see “Connecting an audio

amplifier” on page 11).

To turn off the built-in speakers:

1. Press MENU.

2. Press

x or • to highlight the AUDIO menu.

3. Press

y or z to highlight SPEAKERS.

4. Press

x or • to highlight OFF.

MOVE

[

]

[

]

AUDIO

SELECT

SPEAKERS: ON [OFF]

SBS: [ON] OFF

SBS LEVEL: 50

To turn on the built-in speakers:

1. Highlight ON in step 4 above.

yzx •

MENU TV / VIDEO VOLUME CHANNEL POWER

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

VOL

Reference

Appendix

Viewing the demonstration (DEMO) mode

The demonstration (DEMO) mode is an option available on the

SET UP menu that will demonstrate several features of your TV.

To start the demonstration mode:

1. Press MENU.

2. Press x or • to highlight the SET UP menu.

3. Press

y or z to highlight DEMO.

4. Press

x or • to highlight START.

4. Press MENU to start the demo.

To stop the demonstration mode:

Press RECALL, EXIT, or POWER.

Understanding the last mode memory feature

If the power is cut off while you are viewing the TV, the Last Mode

Memory feature turns the TV on automatically when the power is

resupplied.

If the power is going to be off for a long time and you are going to be

away from your TV, unplug the power cord to prevent the TV from

turning on in your absence.

Using the sub-bass system (SBS)

The sub-base system (SBS) allows you to enhance bass performance,

even when the volume is low.

To turn the sub-bass system on (or off):

1. Press MENU.

2. Press

x or • to highlight the AUDIO menu.

3. Press

y or z to highlight SBS.

4. Press

x or • to highlight ON (or OFF).

MOVE

[

]

[

]

AUDIO

SELECT

SPEAKERS: [ON] OFF

SBS: [ON] OFF

SBS LEVEL: 50

To adjust the sub-bass system:

1. Turn the sub-bass system on, as instructed above.

2. Press MENU.

3. Press

x or • to highlight the AUDIO menu.

4. Press

y or z to highlight SBS LEVEL.

5. Press

x or • to adjust the SBS level.

MOVE

[

]

[

]

AUDIO

ADJUST

SPEAKERS: [ON] OFF

SBS: [ON] OFF

SBS LEVEL: 50

–

CH RTN

ADV/

PIP CH

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

ENTER

FAV

C.CAPT

EXIT

RESET

100

RECALL

VOL

POWER

EXIT

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

Appendix

Troubleshooting

Before calling a service technician, please check the following table for possible causes of the problem and

some solutions.

Problem Solution

TV will not turn on • Make sure the power cord is plugged in, and then press POWER.

• The remote control batteries may be dead. Replace the batteries or

press the POWER button on the TV.

No picture, no sound • Check the antenna/cable connections.

No sound, picture OK • The sound may be muted. Press MUTE or VOLUME

y z.

• The station may have broadcast difficulties. Try another channel.

Poor sound, picture OK • The station may have broadcast difficulties. Try another channel.

Poor picture, sound OK • Check the antenna connections.

• The station may have broadcast difficulties. Try another channel.

• Adjust the PICTURE menu.

Poor reception of broadcast channels • The station may have broadcast difficulties. Try another channel.

• Check the antenna connections.

• If you are using a VCR, make sure the TV/VCR button is set

correctly.

Cannot receive above channel 13 • Make sure TV/CABLE is set to TV mode.

Unable to select a certain channel • The channel may be locked out with the channel lock feature, or

erased with the add/erase feature.

Multiple images • The station may have broadcast difficulties. Try another channel.

• Use a highly directional outdoor antenna.

Poor color or no color • The station may have broadcast difficulties. Try another channel.

• Adjust the TINT and/or COLOR in the PICTURE menu.

• If you change the direction of the TV while it is turned on, the

picture could suffer from color shading. If so, turn the TV off and

allow it to cool down for several hours before turning it on again.

No stereo or SAP sound from a • Make sure the MTS feature is set properly.

known MTS broadcast

The remote control does not operate • Check that the TV/CABLE/VCR switch is properly set.

• There may be an obstruction between the remote control and the

remote control sensor.

• The remote control batteries may be dead. Replace the batteries.

The V-Chip PIN code does not work • Change or reset your PIN code.

Reference

Appendix

Cleaning and care

WARNING: TV sets use high voltage. Do not remove the cabinet back.

Refer all servicing to a qualified service technician.

To clean the TV screen and cabinet:

1. Unplug the power cord to avoid possible shock hazard.

2. Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water

to clean the TV screen and trim. Do not use too much water; liquid spilling into the cabinet can damage

the TV.

3. Wipe off excess moisture with a clean dry cloth.

4. Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.

Caution:

Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.

These chemicals can damage the cabinet’s finish.

Specifications

Television system NTSC standard

Channel coverage VHF: 2 through 13

UHF: 14 through 69

Cable TV: Mid band (A-8 through A-1, A through 1)

Super band (J through W)

Hyper band (AA through ZZ, AAA, BBB)

Ultra band (65 through 94, 100 through 125)

Power source 120 AC, 60 Hz

Power consumption 96 W

Audio power 5 W + 5 W

Speaker type 2-3/8 x 4-3/4 inches (60 x 120 mm)

Video/Audio terminals ColorStream™ (component video) INPUT

Y: 1V (p-p), 75 ohm

R (PR): 0.7 V (p-p), 75 ohm

B (PB): 0.7 V (p-p), 75 ohm

S-VIDEO INPUT

Y-INPUT: 1 V (p-p), 75 ohm, negative sync.

C-INPUT: 0.286 V (p-p) (burst signal), 75 ohm

VIDEO/AUDIO INPUT

VIDEO: 1 V (p-p), 75 ohm, negative sync.

AUDIO: 150 mV (rms) (30% modulation equivalent, 47 k ohm)

VIDEO/AUDIO OUTPUT

VIDEO: 1 V (p-p), 75 ohm, negative sync.

AUDIO: 150 mV (rms) (30% modulation equivalent, 47 k ohm)

Dimensions Width: 38-3/16 inches (970 mm)

Height: 30-1/16 inches (764 mm)

Depth: 25-1/4 inches (641 mm)

Weight 154 lbs (69.9 kg)

Supplied accessories Remote control with two size “AA” batteries

Optional TV stand ST-3641

Design and specifications are subject to change without notice.

Reference

Welcome to

Toshiba

Connecting

your TV

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

Appendix

Index

Limited United States warranty

If after following all of the operating instructions in this manual and checking the “Troubleshooting” section, you find that service is needed:

Toshiba America Consumer Products, Inc. (“TACP”) and Toshiba Hawaii Inc. (“THI”) make the following limited warranties. These limited warranties extend

to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.

Limited One (1) Year Warranty

TACP and THI warrant this product and its parts against defects in

materials or workmanship for a period of one (1) year after the date of

original retail purchase. During this period, TACP and THI will repair or

replace a defective part, at their option, with a new or refurbished part,

without charge to you. TACP/THI Authorized Service Center personnel

will come to your home when warranty service is required. Depending on

the type of repair required, either the service will be performed in your

home or the set will be taken to the TACP/THI authorized service center

for repair and returned to your home at no cost to you.

Limited Two (2) Year Warranty of Picture Tube

TACP and THI further warrant the picture tube in this product against

defects in materials or workmanship for a period of two (2) years after the

date of original retail purchase. During this period, TACP and THI will

repair or replace a defective picture tube at their option, with a new or

refurbished picture tube, without charge to you, except that, if a defective

picture tube is replaced after one (1) year from the date of the original

retail purchase, you pay labor charges involved in the replacement.

Rental Units

The warranty for rental units begins with the first rental or thirty (30) days

from the date of shipment to the rental firm, whichever comes first.

Commercial Units

Products sold and used for commercial use have a limited ninety (90) day

warranty for all parts, labor and picture tube.

How to Obtain Warranty Service

Owner’s Manual and Demographic Card

You should read this owner’s manual thoroughly before operating this

product. You should complete and mail the enclosed Demographic card

within ten days after you, or the person who has given you this product as a

gift, purchased this product. This is one way to enable TACP/THI to

provide you with better customer service and improved products. Failure to

return the Demographic card will not affect your rights under this warranty.

Your Responsibility

The above warranties are subject to the following conditions;

(1) You must retain your bill of sale or provide other proof of purchase.

(2) All warranty servicing of this product must be made by an Authorized

TACP/THI Service Center.

(3) These warranties are effective only if the product is purchased and

operated in the U.S.A. or Puerto Rico.

(4) Labor service charges for set installation, setup, adjustment of

customer controls, and installation or repair of antenna systems are

not covered by this warranty. Reception problems caused by

inadequate antenna systems are your responsibility.

(5) Warranties extend only to defects in materials or workmanship as

limited above, and do not extend to any product or parts that have

been lost or discarded by you, or to damage to products or parts

caused by misuse or accident, damage caused by Acts of God such as

lightning or fluctuations in electric power, improper installation,

improper maintenance, or use in violation of instructions furnished by

us, or to units which have been modified or had the serial number

removed, altered, defaced, or rendered illegible.

All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the

duration of the limited warranties set forth above. With the exception of any warranties implied by state law as hereby limited, the foregoing warranty is

exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or

replacement of any parts. In no event shall TACP or THI be liable for consequential or incidental damages.

No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The

time within which action must be commenced to enforce any obligation of TACP or THI arising under this warranty or under any state or law of the

United States or any state thereof, is hereby limited to 90 days from the date you discover, or should have discovered, the defect. This limitation does not

apply to implied warranties arising under state law.

This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some states do not allow limitation on

how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or consequential damages; therefore, the

above provisions may not apply to you.

Products purchased in the U.S.A. and used in Canada are not covered by these warranties.

Products purchased in Canada and used in the U.S.A. are not covered by these warranties.

REV. 03/01

ATTENTION CANADIAN CONSUMERS

Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and

forward this completed form with a copy of the bill of sale to TOSHIBA OF CANADA to “Register and Validate” their

warranty.

(2) Present your bill of sale or other proof of purchase to the Authorized Service

Center. “Authorized TACP/THI service center personnel will come to your

home when warranty service is required. Depending on the type of repair

required, either the service will be performed in your home or the TV set will