Aeg-Electrolux L74650LE Manual de usuario

Marca: Aeg-Electrolux

Modelo: L74650LE

Categoría: Lavadoras

Tipo: Manual de usuario

LAVAMAT 74650LE

User manual Washing Machine

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this

instruction manual carefully. It will enable you to navigate all processes perfectly

and most efficiently. To refer to this manual any time you need to, we recommend

you to keep it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

Contents

Operating instructions 3

Safety information 3

General safety 3

Installation 4

Use 4

Child Safety 4

Product description 5

Detergent dispenser drawer 6

Control panel 6

Display (7) 7

Indicator pilot lights (10) 8

First use 8

Personalization 8

Acoustic signals 8

Child safety lock 8

Daily use 9

Load the laundry 9

Measure out the detergent and the fabric

softener 9

Select the required programme by means of

programme selector dial (1) 10

Select the desired TEMPERATURE (Button 2)

Select the spin speed (SPIN Reduction) or the

RINSE HOLD option (Button 3) 11

Programme option buttons 11

Select the PREWASH option (Button 4)

Select the STAIN option (Button 5) 11

Select the TIME SAVING option (Button 6)

Select an additional rinse (EXTRA RINSE)

Select the START/PAUSE (Button 8) 12

Select the DELAY START (Button 9) 12

Altering an option or a running programme

Interrupting a programme 13

Cancelling a programme 13

Opening the door after the programme has

started 13

At the end of the programme 13

Washing programmes 14

Helpful hints and tips 18

Sorting out the laundry 18

Temperatures 19

Before loading the laundry 19

Maximum loads 19

Laundry weights 19

Removing stains 19

Detergents and additives 20

Degrees of water hardness 20

Care and cleaning 21

Descaling 21

After each wash 21

Maintenance wash 21

External cleaning 21

Detergent dispenser drawer 21

Washing drum 22

Door seal 22

Drain pump 22

Cleaning the water inlet filters 24

Frost precautions 25

Emergency emptying out 25

What to do if… 26

Technical data 29

Consumption values 30

Installation instructions 30

Installation 30

Unpacking 30

Positioning and levelling 32

Water inlet 33

Water-stop device 34

Contents

Water drainage 34

Electrical connection 35

Environment concerns 35

Packaging materials 36

Ecological hints 36

Subject to change without notice

Operating instructions

Safety information

Read carefully & keep for future reference.

• The safety of Your appliance complies with the industry standards and with legal re

quirements on the safety of appliances. However, as manufacturers, we feel it is our duty

to provide the following safety notes.

• It is most important that this instruction book should be retained with the appliance for

future reference. Should the appliance be sold or transferred to another owner, or should

you move house and leave the appliance, always ensure that the book is supplied with

the appliance in order that the new owner can get to know the functioning of the

appliance and the relevant warnings.

• You MUST read them carefully before installing or using the appliance.

• Before first starting up, check the appliance for any damage incurred during transport.

Never connect up a damaged appliance . If parts are damaged, contact your supplier.

• If the appliance is delivered in the winter months when there are minus temperatures.

Store it at room temperature for 24 hours before using for the first time.

General safety

• It is dangerous to alter the specifications or attempt to modify this product in any way.

• During high temperature wash programmes the door glass may get hot. Do not touch

it!

• Make sure that small pets do not climb into the drum. To avoid this, please check into

the drum before using.

• Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp

material can cause extensive damage and must not be placed into the machine.

• Only use the advised quantities of fabric softener and detergent. Damage to the fabric

can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.

• Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case

as it is possible for such items to slip down between the tub and the inner drum.

• Do not use your washing machine to wash articles with whalebones, material without

hems or torn material.

• Always unplug the appliance and turn off the water supply after use, cleaning and

maintenance.

• Under no circumstances should you attempt to repair the machine yourself. Repairs

carried out by inexperienced people may cause injury or serious malfunctioning. Contact

your local Service Centre. Always insist on genuine spare parts.

Safety information

132951780 - 00 - 292009

Installation

• This appliance is heavy. Care should be taken when moving it.

• When unpacking the appliance, check that it is not damaged. If in doubt, do not use it

and contact the Service Centre.

• All packing and transit bolts must be removed before use. Serious damage can occur to

the product and to property if this is not adhered to. See relevant section in the user

manual.

• After having installed the appliance, check that it is not standing on the inlet and drain

hose and the worktop is not pressing the electrical supply cable against the wall.

• If the machine is situated on a carpeted floor, please adjust the feet in order to allow air

to circulate freely under the appliance.

• Always be sure, that there is no water leakage from hoses and their connections after

the installation.

• If the appliance is installed in a location subject to frost, please read the “dangers of

freezing” chapter.

• Any plumbing work required to install this appliance should be carried out by a qualified

plumber or competent person.

• Any electrical work required to install this appliance should be carried out by a qualified

electrician or competent person.

Use

• This appliance is designed for domestic use. It must not be used for purposes other than

those for which it was designed.

• Only wash fabrics which are designed to be machine washed. Follow the instructions on

each garment label.

• Do not overload the appliance. See the Washing Programme Table.

• Before washing, ensure that all pockets are empty and buttons and zips are fastened.

Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass

before washing. Underwired bras must NOT be machine washed.

• Garments which have been in contact with volatile petroleum products should not be

machine washed. If volatile cleaning fluids are used, care should be taken to ensure that

the fluid is removed from the garment before placing in the machine.

• Never pull the power supply cable to remove the plug from the socket; always take hold

of the plug itself.

• Never use the appliance if the power supply cable, the control panel, the working surface

or the base are damaged so that the inside of the washing machine is accessible.

Child Safety

• This appliance is not intended for use by person (including children) with reduced physical

sensory or mental capabilities or lack of experience and knowledge unless they have been

given supervision or instruction concerning use of the appliance by a person responsible

for their safety.

• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children

- danger of suffocation! Keep them out of children's reach.

• Keep all detergents in a safe place out of children’s reach.

Safety information

• Make sure that children or pets do not climb

into the drum. To prevent children or pets

becoming trapped inside the drum the ma

chine incorporates a special feature. To ac

tivate this device, rotate the button (without

pressing it) inside the door clockwise until

the groove is horizontal. If necessary use a

coin. To disable this device and restore the

possibility of closing the door, rotate the

button anticlockwise until the groove is ver

tical.

Product description

Your new appliance meets all modern requirements for effective treatment of laundry with

low water, energy and detergent consumption.

The NEW JET system allows total use of detergent and reduces water consumption so saving

energy.

1 Detergent dispenser drawer

2 Control panel

3 Door opening handle

4 Rating plate

5 Drain pump

6 Adjustable feet

Product description

Detergent dispenser drawer

Compartment for detergent used for pre-

wash . The prewash detergent is added at the be

ginning of the wash programme.

Compartment for powder or liquid detergent

used for main wash .

Compartment for liquid additives (fabric soft

ener, starch).

Compartment for stain remover used for main

wash with STAINoption .

Control panel

Below is a picture of the control panel. It shows the programme selector dial as well as the

buttons and the pilot lights. These are presented by relevant numbers on the following

pages.

1 2 3 4 5 6 7 8 9

1 Programme selector dial

2 Temperature button (TEMP.)

3 SPIN reduction button (RPM)

4 PREWASH button (PRELAVADO)

5 STAIN button (MANCHAS)

6 TIME SAVING button (TIEMPO)

7 Display

8 START/PAUSE button (START/PAUSA)

9 DELAY START button (INICIO DIFERIDO)

10 Indicator pilot lights

Control panel

Table of Symbols

= Rinse hold

= Handwash

= Cold

= Child safety lock

Display (7)

7.1 7.2

7.3

7.4

7.5

7.1 Child safety lock symbol

7.2

•

Duration of selected programme : after selecting a programme, the duration is dis

played in hours and minutes (for example 2.05). The duration is calculated automatically

on the basis of the maximum recommended load for each type of fabric. After the pro

gramme has started, the time remaining is updated every minute.

•

Alarm codes : in the event of operating problems, some alarm codes can be displayed,

for example E20 (see chapter «What to do if...»).

•

End of programme : when the programme has finished a blinking zero

is displayed,

the symbol 7.5 (Door locked) disappears on the display, the pilot light of button 8 goes

out and the door can be opened.

•

Incorrect option selection : if an option which is not compatible with the set wash

programme is selected, the message Err is displayed for a few seconds and the yellow

pilot light of button 8 light starts blinking.

•

Delay Start : the selected delay (20 hours max) set by the relevant button appears on

the display for a few seconds, then the duration of the previously selected programme

is displayed. The symbol 7.3 will appear on the display. The delay time value decreases

by one unit every hour. When only 1 hour remains, the time decreases every minute.

7.3 Delay Start - symbol

7.4 Programme progress display : the display shows the different washing programme

phases. After the appliance starts operating, the display show the relevant symbol of the

washing phase which is running:

= WASHING, = RINSING, = DRAINING, =

SPINNING - symbols

7.5 Door lock symbol

This symbol indicates if the door can be opened:

• symbol on: the door cannot be opened. The appliance is running or the appliance has

stopped with water left in the tub.

• symbol off: the door can be opened. The washing programme is finished.

Stand by

If your laundry is not removed within 10 minutes after the programme is finished, the

backlight of the display switches off and the energy saving system will be enabled. Only

the button 8 pilot light is blinking to indicate that the appliance has to be switched off. By

pressing any buttons the appliance will come out from the energy saving status and you

could set another washing programme or switch off the appliance.

Indicator pilot lights (10)

If the OVERDOSAGE (SOBRE DOSIFICATION)

pilot light 10.1 goes on at the end of the

programme, it indicates that too much detergent

has been used.

When the appliance is performing additional rin

ses the EXTRA RINSE (AQUACARE)

pilot light 10.2 illuminates. To add an ad

ditional rinse, please see chapter «Select an addi

tional rinse».

First use

• Ensure that the electrical and water connections comply with the installation instruc

tions.

• Remove the polystyrene block and any material from the drum.

• Before the first wash, run a cotton cycle at the highest temperature without any laundry

in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2

a measure of detergent into the main wash compartment and start the machine.

Personalization

Acoustic signals

The machine is provided with an acoustic device, which sounds in the following cases:

• at the end of the cycle

• in the event of operating problems.

By pressing the 3 and 4 buttons simultaneously for about 6 seconds, the acoustic signal is

deactivated (except for the events of operating problems). By pressing these 2 buttons

again, the acoustic signal is reactivated.

Child safety lock

This device permits you to leave the appliance unattended and not to worry that children

might be injured by or cause damage to the appliance.

This function remains able also when the washing machine is not working.

There are two different ways to set this option:

•

Before pressing button 8 : it will be impossible to start the machine.

•

after pressing button 8 : it will be impossible to change any other programme or option.

To enable or disable this option press simultaneously for about 6 seconds buttons 4 and

5 until the symbol 7.1 appears or disappears on or from the display.

Daily use

Load the laundry

1. Open the door by carefully pulling the

door handle outwards. Place the laundry

in the drum, one item at a time, shaking

them out as much as possible.

2. Close firmly the door. You must hear a

click during closing.

WARNING!

Do not embed the laundry between the door

and the rubber joint.

Measure out the detergent and the fabric softener

Your new appliance was designed to reduce water, energy and detergent consumption.

1. Pull out the dispenser drawer until it

stops. Measure out the amount of deter

gent required, pour it into the main wash

compartment

and, if you wish to carry

out the prewash phase, pour the deter

gent into the compartment marked

If you wish to perform the stain function,

pour the stain remover into the compart

ment marked with blue arrow

Daily use

2. If required, pour fabric softener into the

compartment marked

(the amount

used must not exceed the MAX mark in

the drawer).

Close the drawer gently.

Select the required programme by means of programme selector dial (1)

You can choose the right programme for any type of laundry following the descriptions on

the washing programme tables (see «Washing Programmes»).

Turn the programme selector dial to the required programme. The programme selector

determines the type of washing cycle (e.g. water level, drum movement, number of rinses)

and the washing temperature according to the type of laundry.

The pilot light of button 8 starts blinking.

The selector dial can be turned either clockwise or anticlockwise. On position

the pro

gramme is reset and the machine is switched off.

At the end of the programme the selector dial must be turned to position

, to

switch the machine off.

If you turn the programme selector dial to another programme when the machine is work

ing, the yellow pilot light of button 8 will blink 3 times and the message Err is displayed

on the display to indicate a wrong selection. The machine will not perform the new selected

programme.

Select the desired TEMPERATURE (Button 2)

When selecting a programme, the appliance automatically proposes the default tempera

ture provided for that programme.

Press this button repeatedly to increase or decrease the temperature, if you want your

laundry to be washed at a temperature different from the one proposed by the washing

machine.

By selecting position

(Cold) the machine will wash with cold water. To be used for

extremely delicate items, such as curtains.

For the maximum and the minimum available wash water temperature, see «Washing pro

grammes».

Daily use

Select the spin speed (SPIN Reduction) or the RINSE HOLD option (Button 3)

When the required programme has been selected, your appliance automatically proposes

the maximum spin speed provided for that programme.

Press this button repeatedly to change the spin speed, if you want your laundry to be spun

at a speed different from the one proposed by the washing machine. The relevant light will

light up.

RINSE HOLD : by selecting this option the water of the last rinse is not emptied out to

prevent the fabrics from creasing. When the programme has finished the display shows a

blinking

, the symbol 7.5 appears on the display and the pilot light of button 8 is off.

The door is locked to indicate that the water must be emptied out.

To empty the water out please read chapter «At the end of the programme».

Programme option buttons

Depending on the programme, different functions can be combined. These must be selected

after choosing the desired programme and before pressing the button 8 .

When these buttons are pressed, the corresponding pilot lights come on. When they are

pressed again, the pilot lights go out.

If an incorrect option is selected, the in yellow pilot light of the button 8 blinks for 3 times

and the Err message appears on the display for some seconds.

For the compatibility among the washing programmes and the options see chapter «Wash

ing Programmes».

Select the PREWASH option (Button 4)

Select this option if you wish your laundry to be prewashed at 30°C before the main wash.

The Prewash ends with a short spin in programmes for cotton and synthetic fabrics, whereas

in the programmes for delicate fabrics the water is only drained.

The relevant light will light up.

Select the STAIN option (Button 5)

Select this option to treat heavily soiled or stained laundry with stain remover (extended

main wash with time optimized stain action phase). The relevant light will light up.

This option is not available with a temperature lower than 40°C.

If you wish to perform a programme with the stain option, pour stain remover into stain

compartment

marked with a blue arrow.

Select the TIME SAVING option (Button 6)

This option allows you to modify the washing time, automatically proposed by the appli

ance.

By pressing this button you can select the following options:

DAILY: by pressing button 6 once, the relative pilot light comes on and the washing duration

will be reduced to wash daily soiled laundry.

SUPER QUICK: by pressing button 6 twice, the relative pilot light remains lit, the washing

duration will be reduced to wash lightly soiled laundry or items that have been used or

worn for a short time. On the display will be visualized the decreased washing time.

Daily use

Select an additional rinse (EXTRA RINSE)

This appliance is designed for saving water. However, for people with a very delicate skin

(allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of

water.

Press simultaneously buttons 2 and 3 for some seconds: the pilot light 10.2 comes on. This

function stays permanently on. To remove it press the same buttons again until the pilot

light 10.2 goes off.

Select the START/PAUSE (Button 8)

To start the selected programme, press the button 8 , the corresponding red pilot light stops

blinking.

The symbols 7.4 and 7.5 appear on the display to indicate that the appliance starts oper

ating and that the door is locked.

To interrupt a programme which is running, press the button 8 : the corresponding red

pilot light starts blinking.

To restart the programme from the point at which it was interrupted, press the button 8

again. If you have chosen a delayed start with button 9 , the machine will begin the count

down. If an incorrect option is selected, the yellow pilot light of the button 8 blinks for 3

times the message Err is displayed for about a few seconds.

Select the DELAY START (Button 9)

Before you start the programme , if you wish to delay the start, press the button re

peatedly, to select the desired delay.

The selected delay time value (up to 20 hours) will appear on the display for a few seconds,

then the duration of the programme will appear again.

You must select this option after you have set the programme and before you press the

button 8 .

The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by

1 hour up to a maximum of 20 hours by means of this button.

The door will be locked throughout the delay time. If you wish to add laundry in the machine

during the delay time you will press button 8 to put the machine in pause. Add the laundry,

close the door and press button 8 again.

Selecting the delayed start.

• Select the programme and the required options.

• Select the delay start.

•

Press button 8 : the appliance starts its hourly countdown. The programme will start

after the selected delay has expired.

Cancelling the delayed start

•

Set the washing machine to PAUSE by pressing the button 8 ;

•

Press button 9 once until the symbol

’ is displayed;

•

Press the button 8 again to start the programme.

The selected delay can be changed only after selecting the washing programme again.

The Delay Start can not be selected with the draining programme.

Daily use

Altering an option or a running programme

It is possible to change some options before the programme carries them out. Before you

make any change, you must pause the washing machine by pressing the button 8 .

Changing a running programme is possible only by resetting it . Turn the programme

selector dial to

and then to the new programme position. Start the new programme by

pressing the 8 button again. The washing water in the tub will not emptied out.

Interrupting a programme

Press the button 8 to interrupt a programme which is running, the corresponding light

starts blinking. Press the button again to restart the programme.

Cancelling a programme

Turn the selector dial to to cancel a programme which is running. Now you can select

a new programme.

Opening the door after the programme has started

When the machine is working and through the delay time, the door is locked. If, for any

reason, it is necessary to open it, set firstly the machine to pause by pressing the button

8 . If the symbol 7.5 after a few minutes goes off, the door can be opened.

If the symbol 7.5 stays on and the door remains locked, this means that the machine is

already heating or that the water level is too high. In this case the door can not be opened.

If you cannot open the door but you need to open it you have to switch the machine off

by turning the selector dial to

. After a few minutes the door can be opened (pay

attention to the water level and temperature !) .

After closing the door, it is necessary to select the programme and options again and to

press button 8 .

At the end of the programme

The machine stops automatically, the pilot light of button 8 and the symbol 7.5 goes off

and a blinking

will appear on the display. Some acoustic signals sound. The door can be

opened.

If a programme or an option that ends with water still in the tub has been selected, a

blinking

will appear on the display, the pilot light of button 8 goes off and the door

remains locked to indicate that the water must be emptied out before opening the door.

Follow the below instructions to empty out the water:

• Turn the programme selector dial to

• Select the draining or spinning programme

• Reduce the spin speed, if needed, by pressing the relevant button

•

Press button 8 to start the programme

•

When the programme has finished the display shows a blinking

. The symbol 7.5 goes

off and the door can be opened.

Turn the programme selector dial to

to switch the machine off. Remove the laundry

from the drum and carefully check that the drum is empty. If you do not intend to carry

out another wash, close the water tap. Leave the door open to prevent the formation of

mildew and unpleasant smells.

Daily use

Washing programmes

Programme - Maximum and Minimum Temperature

- Cycle Description - Maximum Fabrics Load - Type of

Laundry

Options

Detergent

Compart

ment

(ALGODÓN)

COTTON

95° - Cold

Main wash - Rinses - Long spin at the maximum spin

speed

Max. load 7 kg - Reduced load 3,5 kg

White and coloured cotton (normally soiled items).

SPIN REDUCTION

RINSE HOLD

PREWASH

STAIN

EXTRA RINSE

TIME SAVING

(ANTIBACTERIAS)

SANITISE

60°

Main wash - Rinses - Long spin at the maximum spin

speed

Max. load 7 kg

The washing programme for white cottons. This pro

gram eliminates the micro-organisms thanks to the

washing by 60°C and an additional rinse. In this way

the action is more effective. Put into the compart

ment Stain a special additive for hygiene and select

the option Stain.

SPIN REDUCTION

RINSE HOLD

PREWASH

STAIN

40  60 MIX

MIXED FABRICS

40°

Main wash - Rinses - Long spin at the maximum spin

speed

Max. load 7 kg

White and coloured cotton This programme can be

used for laundry, which should be washed at 40°C or

60°C separately. The maximum load capacity can be

put into the drum in order to save energy and water.

The same good washing result will be obtained as for

normal programme at 60°C.

SPIN REDUCTION

RINSE HOLD

PREWASH

STAIN

EXTRA RINSE

(TEJIDOS GRUESOS) JEANS

60° - Cold

Main wash - Rinses - Long spin at 1200 rpm

Max. load 3,5 kg

With this programme it is possible to wash items like

pants, shirts or jackets in Jeans and also jersey realized

with hi-tech materials. (The Extra Rinse option will be

activated automatically).

SPIN REDUCTION

RINSE HOLD

PREWASH

Washing programmes

Programme - Maximum and Minimum Temperature

- Cycle Description - Maximum Fabrics Load - Type of

Laundry

Options

Detergent

Compart

ment

(SINTÉTICOS)

SYNTHETICS

60° - Cold

Main wash - Rinses - Short spin at 1200 rpm

Max. load 3,5 kg - Reduced load 2 kg

Synthetic or mixed fabrics: underwear, coloured

garments, non-shrink shirts, blouses.

SPIN REDUCTION

RINSE HOLD

PREWASH

STAIN

TIME SAVING

EXTRA RINSE

(PLANCHA FÁCIL PLUS )

EASY IRON

60° - Cold

Main wash - Rinses - Short spin at 1200 rpm

Max. load 1,5 kg

Synthetic fabrics to be gentle washed and spun.

Selecting this programme the laundry is gently wash

ed and spun to avoid any creasing. In this way ironing

is easier. Furthermore the machine will perform ad

ditional rinses.

SPIN REDUCTION

RINSE HOLD

PREWASH

EXTRA RINSE

(DELICADOS)

DELICATES

40° - Cold

Main wash - Rinses - Short spin at 1200 rpm

Max. load kg 3,5 - Reduced load kg 2

Delicate fabrics: acrylics, viscose, polyester.

SPIN REDUCTION

RINSE HOLD

PREWASH

STAIN

TIME SAVING

EXTRA RINSE

(TEJIDOS DE MODA) VISCOSE

40° - Cold

Main wash - Rinses - Short spin at 1200 rpm

Max. load kg 3,5

Special gentle programme for fabrics such a viscose,

cupro, lyocell. It performs an cleaning action more

intensive than the handwash programme.

SPIN REDUCTION

RINSE HOLD

PREWASH

STAIN

EXTRA RINSE

(ACLARADOS DELICADOS)

DELICATE RINSES

Rinses - Short spin at 1200 rpm

Max. load 7 kg

With this programme it is possible to rinse and spin

cotton garments which have been washed by hand.

The machine performs some rinses, followed by a final

spin.

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

Washing programmes

Programme - Maximum and Minimum Temperature

- Cycle Description - Maximum Fabrics Load - Type of

Laundry

Options

Detergent

Compart

ment

(DESCARGA)

DRAIN

Draining of water

Max. load 7 kg

For emptying out the water of the last rinse in pro

grammes with the option selected, which eds with

water left in the tub.

(CENTRIFUGAR)

SPIN

Drain and long spin at the maximum spin speed

Max. load 7 kg

Separate spin for hand washed cotton garments and

after programmes with the option selected which

ends with water left in the tub. Before selecting this

programme the selector dial must be turned to

You can choose the spin speed by pressing the rele

vant button to adapt it to the fabrics to be spun.

SPIN REDUCTION

(MANTAS/ EDREDONES)

BLANKET

40° - 30°

Main wash - Rinses - Short spin at 800 rpm

Max. load 2 kg

Special programme for a single synthetic blanket, du

vet, bedspread and so on.

SPIN REDUCTION

(LANA PLUS)

WOOL PLUS

(HANDWASH)

40° - Cold

Main wash - Rinses - Short spin at 1200 rpm

Max. load 2 kg;

Washing programme for machine washable wool as

well as for hand washable woollens and delicate fab

rics. Note : A single or bulky item may cause imbal

ance. If the appliance doesn’t perform the final spin

phase, add more items, redistribute the load manually

and then select the spinning programme.

SPIN REDUCTION

RINSE HOLD

(LENCERÍA) LINGERIE

(HAND WASH)

40° - Cold

Main wash - Rinses - Short spin at 1200 rpm

Max. load 1 kg

This programme is suitable for very delicate items, as

lingerie, bras and underwear etc.

SPIN REDUCTION

RINSE HOLD

Washing programmes

Programme - Maximum and Minimum Temperature

- Cycle Description - Maximum Fabrics Load - Type of

Laundry

Options

Detergent

Compart

ment

(OUTDOOR)

SPORT JACKETS

40° - Cold

Main wash - Rinses - Short spin at 800 rpm

Max. load 3 kg

Special programme for sport clothes. By selecting this

programme, we recommend that you not add any

additives.

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

(SPORT INTENSIVO)

SPORT INTENSIVE

40° - Cold

Prewash - Main wash - Rinses - Short spin at 1200

rpm

Max. load 3 kg

Special programme is suitable for washing heavily

soiled sport items. The machine will add automatically

a prewash phase before the main wash to eliminate

mud stains. For this phase we recommend that you

NOT put the detergent into the

compartment of

the detergent drawer in order to wash the items with

water only.

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

20 MIN.  3 KG

30°

Main wash - Rinses - Short spin at 1200 rpm

Max. load 3 kg

This programme may be used for a quick washing of

sport items or cotton and synthetic items , lightly

soiled or worn once.

SPIN REDUCTION

(EXPRESS INTENSIVO)

QUICK INTENSIVE

60° - 40°

Main wash - Rinses - Short spin at 1200 rpm

Max. load 5 kg

Quick washing programme, to be used for lightly

soiled white/fast coloured cottons and mixed fabrics.

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

Washing programmes

Programme - Maximum and Minimum Temperature

- Cycle Description - Maximum Fabrics Load - Type of

Laundry

Options

Detergent

Compart

ment

SUPER ECO

Cold

Main wash - Rinses - Short spin at 1200 rpm

Max. load 3 kg

Mixed fabrics (cotton and synthetic) . Cold wash

programme designed for saving energy, water and

time. This programme is suitable with detergents that

becomes effective at low temperature. The detergent

must be used with the supplied or a suitable detergent

dosing cap (use the amount of the detergent recom

mended by detergent's manufacturer). The appliance

automatically runs a short heating phase if the water

temperature is lower than 6°C only.

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

(ALGODÓN ECO)

COTTON ECONOMY

60°

Main wash - Rinses - Long spin at the maximum spin

speed

Max. load 7 kg

White and fast coloured cotton .

This programme can be selected for slightly or nor

mally soiled cotton items. The temperature will de

crease and the washing time will be extended. This

allows to obtain a good washing efficiency so saving

energy.

SPIN REDUCTION

RINSE HOLD

PREWASH

STAIN

EXTRA RINSE

/ OFF

For cancelling the programme which is running or to

switch the machine off .

1) If you select the Super Quick option by pressing button 6 , we recommend that you reduce the maximum load

as indicated. Full loading is possible however with somewhat reduced cleaning results.

2) If using liquid detergents, a programme without prewash must be selected.

3) Stain option can be selected only at the temperature of 40°C or higher.

Helpful hints and tips

Sorting out the laundry

Follow the wash code symbols on each garment label and the manufacturer’s washing

instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens.

Helpful hints and tips

Temperatures

95° or 90°

for normally soiled white cottons and linen (e.g. tea cloths, towels,

tablecloths, sheets...)

60°/50°

for normally soiled, colour fast garments (e.g. shirts, night dresses,

pyjamas....) in linen, cotton or synthetic fibres and for lightly soiled

white cotton (e.g. underwear)

40°30° Cold

for delicate items (e.g. net curtains), mixed laundry including syn

thetic fibres and woollens bearing the label «pure new wool, ma

chine washable, non-shrink»

Before loading the laundry

Never wash whites and coloureds together. Whites may lose their «whiteness» in the wash.

New coloured items may run in the first wash; they should therefore be washed separately

the first time.

Make sure that no metal objects are left in the laundry (e.g. hair clips, safety pins,

pins).

Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes.

Remove persistent stains before washing.

Rub particularly soiled areas with a special detergent or detergent paste.

Treat curtains with special care. Remove hooks or tie them up in a bag or net.

Maximum loads

Recommended loads are indicated in the washing programme charts.

General rules:

•

Cotton, linen: drum full but not too tightly packed;

•

Synthetics: drum no more than half full;

•

Delicate fabrics and woollens: drum no more than one third full.

Washing a maximum load makes the most efficient use of water and energy.

For heavily soiled laundry, reduce the load size.

Laundry weights

The following weights are indicative:

bathrobe 1200 g

quilt cover 700 g

man’s work shirt 600 g

sheet, man’s pyjamas 500 g

tablecloth 250 g

pillow case, towelling towel, night dress, man’s shirt 200 g

tea cloth, ladies’ briefs, napkin, blouse, men’s underpants 100 g

Removing stains

Stubborn stains may not be removed by just water and detergent. It is therefore advisable

to treat them prior to washing.

Helpful hints and tips

Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a

special detergent then rub in the soap and water.

Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and

dab the stain; treat several times.

Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab

the stain with the fingertips and a cotton cloth.

Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful

with rust stains which are not recent since the cellulose structure will already have been

damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well (whites and fast coloureds only).

Grass: soap lightly and treat with bleach (whites and fast coloureds only).

Ball point pen and glue: moisten with acetone

, lay the garment on a soft cloth and dab

the stain.

Lipstick: moisten with acetone as above, then treat stains with methylated spirits. Treat

any residual marks with bleach.

Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse.

Treat any residual marks with bleach.

Ink: depending on the type of ink, moisten the fabric first with acetone

, then with acetic

acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly.

Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with

detergent paste.

Detergents and additives

Good washing results also depend on the choice of detergent and use of the correct quan

tities to avoid waste and protect the environment.

Although biodegradable, detergents contain substances which, in large quantities, can up

set the delicate balance of nature.

The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.),

the colour, washing temperature and degree of soiling.

All commonly available washing machine detergents may be used in this appliance:

• powder detergents for all types of fabric

• powder detergents for delicate fabrics (60°C max) and woollens

• liquid detergents, preferably for low temperature wash programmes (60°C max) for all

types of fabric, or special for woollens only.

The detergent and any additives must be placed in the appropriate compartments of the

dispenser drawer before starting the wash programme.

If using liquid detergents, a programme without prewash must be selected.

Your appliance incorporates a recirculation system which allows an optimal use of the

concentrated detergent.

Follow the product manufacturer’s recommendations on quantities to use and do not

exceed the «MAX» mark in the detergent dispenser drawer .

Degrees of water hardness

Water hardness is classified in so-called “degrees” of hardness. Information on hardness of

the water in your area can be obtained from the relevant water supply company, or from

your local authority.

1) do not use acetone on artificial silk

Helpful hints and tips

A water softener must be added when water has a medium-high degree of hardness (from

degree of hardness II). Follow the manufacturer’s instructions. The quantity of detergent

can then always be adjusted to degree of hardness I (= soft).

Level Characteristic

Degrees of water hardness

German °dH French °T.H.

1 soft 0-7 0-15

2 medium 8-14 16-25

3 hard 15-21 26-37

4 very hard > 21 > 37

Care and cleaning

You must DISCONNECT the appliance from the electricity supply, before you can carry out

any cleaning or maintenance work.

Descaling

The water we use normally contains lime. It is a good idea to periodically use a water

softening powder in the machine. Do this separately from any laundry washing, and ac

cording to the softening powder manufacturer's instructions. This will help to prevent the

formation of lime deposits.

After each wash

Leave the door open for a while. This helps to prevent mould and stagnant smells forming

inside the appliance. Keeping the door open after a wash will also help to preserve the door

seal.

Maintenance wash

With the use of low temperature washes it is possible to get a build up of residues inside

the drum.

We recommend that a maintenance wash be performed on a regular basis.

To run a maintenance wash:

• The drum should be empty of laundry.

• Select the hottest cotton wash programme.

• Use a normal measure of detergent, must be a powder with biological properties.

External cleaning

Clean the exterior cabinet of the appliance with soap and water only, and then dry thor

oughly.

Do not use methylated spirits, solvents or similar products to clean the cabinet.

Detergent dispenser drawer

The detergent dispenser drawer should be cleaned regularly.

1. Remove the detergent dispenser drawer by pulling it firmly.

Care and cleaning

2. Remove the conditioner insert from the

middle compartment.

3. Clean all parts with water.

4. Put the conditioner insert in as far as it

will go, so that it is firmly in place.

5. Clean all parts of the washing machine,

especially the nozzles in the top of the

washing-in chamber, with a brush.

6. Insert the detergent dispenser drawer in

the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap

water containing iron.

Do not clean the drum with acidic descaling agents, scouring agents containing chlorine

or iron or steel wool.

1. Remove any rust deposits on the drum with a cleaning agent for stainless steel.

2. Run a washing cycle without any washing to clean off any cleaning agent residues.

Programme: Short Cotton Programme at maximum temperature and add approx. 1/4

measuring cup of detergent.

Door seal

Check from time to time the door seal and elimi

nate eventual possible objects that could be trap

ped in the fold.

Drain pump

The pump should be inspected regularly and particularly if:

• the machine does not empty and/or spin

Care and cleaning

• the machine makes an unusual noise during draining due to objects such as safety pins,

coins etc. blocking the pump.

Proceed as follows:

1. Disconnect the appliance.

2. If necessary wait until the water has cooled down.

3. Open the pump door.

4. Place a container close to the pump to collect any spillage.

5. Release the emergency emptying hose, place it in the container and remove its cap

cover.

6. When no more water comes out, un

screw the pump and remove it. Always

keep a rag nearby to dry up spillage of

water when removing the pump.

7. Remove any objects from the pump impeller by rotating it.

Care and cleaning

8. Put the cap back on the emergency emp

tying hose and place the latter back in

its seat.

9. Screw the pump fully in.

10. Close the pump door.

WARNING!

When the appliance is in use and depending on the programme selected there can be hot

water in the pump. Never remove the pump cover during a wash cycle, always wait until

the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is

securely retightened so as to stop leaks and young children being able to remove it.

Cleaning the water inlet filters

If the appliance doesn't fill, takes long to fill water, the starting button blinks yellow or the

display (if available) shows the relevant alarm (see chapter "What to do if..." for more details),

check if the water inlet filters are blocked .

To clean the water inlet filters:

1. Turn off the water tap.

2. Unscrew the hose from the tap.

3. Clean the filter in the hose with a stiff

brush.

4. Screw the hose back onto the tap. Make

sure the connection is tight.

Care and cleaning

5. Unscrew the hose from the machine. Keep

a rug nearby because some water may

flow.

6. Clean the filter in the valve with a stiff

brush or with the piece of cloth.

7. Screw the hose back to the machine and

make sure the connection is tight.

8. Turn on the water tap.

Frost precautions

If the machine is installed in a place where the temperature could drop below 0°C, proceed

as follows:

1. close the water tap and unscrew the water inlet hose from the tap;

2. place the end of the emergency emptying hose and that of the inlet hose in a bowl

placed on the floor and let water drain out;

3. screw the water inlet hose back on and reposition the emergency emptying hose after

having put the cap on again.

By doing this, any water remaining in the machine is removed, avoiding ice forming and

consequently damage to the appliance.

When you use the machine again, make sure that the ambient temperature is above 0°C.

Emergency emptying out

If the water is not discharged, proceed as follows to empty out the machine:

1. pull out the plug from the power socket;

2. close the water tap;

3. if necessary, wait until the water has cooled down;

4. open the pump door;

5. place a bowl on the floor and place the end of the emergency emptying hose into the

bowl. Remove its cap. The water should drain by gravity into the bowl. When the bowl

Care and cleaning

is full, put the cap back on the hose. Empty the bowl. Repeat the procedure until water

stops flowing out;

6. clean the pump if necessary as previously described;

7. replace the emergency emptying hose in its seat after having plugged it;

8. screw the pump again and close the door.

What to do if…

Certain problems are due to lack of simple maintenance or oversights, which can be solved

easily without calling out an engineer. Before contacting your local Service Centre, please

carry out the checks listed below.

During machine operation it is possible that the yellow pilot light of button 8 blinks, one

of the following alarm codes appears on the display and at the same time some acoustic

signals sound every 20 seconds to indicate that the machine is not working:

•

: problem with the water supply

•

: problem with the water draining

•

: door open

•

: anti-flooding system has activated

Once the problem has been eliminated, press the button 8 to restart the programme. If

after all checks, the problem persists, contact your local Service Centre.

Problem Possible cause/Solution

The washing machine does not start:

The door has not been closed.

• Close the door firmly.

The plug is not properly inserted in the power

socket.

• Insert the plug into the power socket.

There is no power at the socket.

• Please check your domestic electrical instal

lation.

The main fuse has blown.

•Replace the fuse.

The selector dial is not correctly positioned and

the button 8 has not been pressed.

• Please turn the selector dial and press the

button 8 again.

The delay start has been selected.

• If the laundry is to be washed immediately,

cancel the delay start.

The Child safety lock has been activated.

• Deactivate this device.

What to do if…

Problem Possible cause/Solution

The machine does not fill:

The water tap is closed.

• Open the water tap.

The inlet hose is squashed or kinked.

• Check the inlet hose connection.

The filter in the inlet hose or the inlet valve filter

are blocked.

• Clean the water inlet filters. (See "Cleaning

the water inlet filters" for more details)

The door is not properly closed.

• Close the door firmly.

The machine fills then empties immediately:

The end of the drain hose is too low.

• Refer to relevant paragraph in «Water drain

age» section.

The machine does not empty and/or does not

spin:

The drain hose is squashed or kinked.

• Check the drain hose connection.

The drain filter is clogged.

• Clean the drain filter.

An option or a programme that ends with the

water still in the tub or a that eliminates all the

spinning phases has been selected.

• Select the draining or the spinning pro

gramme.

The laundry is not evenly distributed in the

drum.

• Redistribute the laundry.

There is water on the floor:

Too much detergent or unsuitable detergent

(creates too much foam) has been used.

• Reduce the detergent quantity or use anoth

er one.

Check whether there are any leaks from one of

the inlet hose fittings. It is not always easy to

see this as the water runs down the hose; check

to see if it is damp.

• Check the water inlet hose connection.

The drain or the inlet hose is damaged.

• Replace it with a new one.

The cap on the filter has not been replaced or

the filter has not been properly screwed in after

cleaning action.

• Refit the cap on the filter or screw the filter

fully in.

What to do if…

Problem Possible cause/Solution

Unsatisfactory washing results:

Too little detergent or unsuitable detergent has

been used.

• Increase the detergent quantity or use an

other one.

Stubborn stains have not been treated prior to

washing.

• Use commercial products to treat the stub

born stains.

The correct temperature was not selected.

• Check if you have selected the correct tem

perature.

Excessive laundry load.

• Reduce the laundry load.

The door will not open:

The programme is still running.

• Wait the end of washing cycle.

The door lock has not been released.

•

Wait until the symbol 7.5 has gone off.

There is water in the drum.

• Select drain or spin programme to empty out

the water.

The machine vibrates or is noisy:

The transit bolts and packing have not been re

moved.

• Check the correct installation of the appli

ance.

The support feet have not been adjusted

• Check the correct levelling of the appliance.

The laundry is not evenly distributed in the

drum.

• Redistribute the laundry.

Maybe there is very little laundry in the drum.

• Load more laundry.

Spinning starts late or the machine does not

spin:

The electronic unbalance detection device has

cut in because the laundry is not evenly distrib

uted in the drum. The laundry is redistributed

by reverse rotation of the drum. This may hap

pen several times before the unbalance disap

pears and normal spinning can resume. If, after

some minutes, the laundry is still not evenly

distributed in the drum, the machine will not

spin.

• The laundry load is perhaps to little, add more

items, redistribute the load manually and

then select the spinning programme.

What to do if…

Problem Possible cause/Solution

The machine makes an unusual noise:

The machine is fitted with a type of motor which

makes an unusual noise compared with other

traditional motors. This new motor ensures a

softer start and more even distribution of the

laundry in the drum when spinning, as well as

increased stability of the machine.

No water is visible in the drum:

Machines based on modern technology operate

very economically using very little water with

out affecting performance.

The display shows the alarm code :

Anti-flooding system has activated.

• Disconnect the appliance and contact the

Service Force Centre

If you are unable to identify or solve the problem,

contact our service centre. Before telephoning,

make a note of the model, serial number and pur

chase date of your machine: the Service Centre

will require this information.

Technical data

Dimensions Width

Height

Depth

60 cm

85 cm

63 cm

Electrical connection

Voltage - Overall power - Fuse

Information on the electrical connection is given on the rating

plate, on the inner edge of the appliance door.

Water supply pressure Minimum

Maximum

0,05 MPa

0,8 MPa

Maximum Load Cotton 7 kg

Spin Speed Maximum 1400 rpm

Technical data

Consumption values

Programme Energy consumption

(KWh)

Water consumption

(litres)

Programme duration

(Minutes)

White Cottons 95° 2.1 62

For the duration of

the programmes,

please refer to the

display on the con-

trol panel.

Cottons 60° 1.35 58

Cotton Energy Saving

Programme 60°

1.05 45

Cottons 40° 0.75 58

Synthetics 40° 0.55 51

Delicates 40° 0.55 63

Wool/ Handwash 30° 0.25 58

1) «Cotton Energy Saving programme » at 60°C with a load of 7 kg is the reference programme for the data entered

in the energy label, in compliance with EEC 92/75 standards.

The consumption data shown on this chart is to be considered purely indicative, as it may

vary depending on the quantity and type of laundry, on the inlet water temperature and

on the ambient temperature.

Installation instructions

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can be refitted if the machine ever

has to be transported again.

1. After removing all the packaging, careful

ly lay machine on it’s back to remove the

polystyrene base from the bottom.

Consumption values

2. Remove the power supply cable and the

draining hose from the hose holders on

the rear of the appliance.

3. Unscrew the three bolts using the key

supplied with the machine.

4. Slide out the relevant plastic spacers.

Installation

5. Open the porthole, take out the inlet hose

from the drum and remove the polystyr

ene block fitted on the door seal.

6. Fill the smaller upper hole and the two

large ones with the corresponding plastic

plug caps supplied in the bag containing

the instruction booklet.

7. Connect the water inlet hose as described

under the paragraph «Water inlet».

Positioning and levelling

Install the machine on a flat hard floor.

Make sure that air circulation around the machine

is not impeded by carpets, rugs etc.

Before placing it on small tiles, apply a rubber

coating.

Never try to correct any unevenness in the floor

by putting pieces of wood, cardboard or similar

materials under the machine.

If it is impossible to avoid positioning the machine

next to a gas cooker or coalburning stove, an in

sulating panel covered with aluminium foil on the

side facing the cooker or stove, must be inserted

between the two appliances.

The machine must not be installed in rooms where the temperature can drop below 0°C.

The water inlet hose and the drain hose must not be kinked.

Installation

Please ensure that when the appliance is installed, it is easily accessible for the engineer in

the event of a breakdown.

Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or

similar materials under the machine to compensate for any unevenness in the floor.

Water inlet

An inlet hose is supplied and can be found inside the machine drum.

This appliance must be connected to a cold water supply.

Do not use the hose from your previous machine to connect to the water supply.

1. Open the porthole and extract the inlet

hose.

2. Connect the hose with the angled con

nection to the machine.

Do not place the inlet hose downwards.

Angle the hose to the left or right de-

pending on the position of your water tap.

3. Set the hose correctly by loosening the

ring nut. After positioning the inlet hose,

be sure to tighten the ring nut again to

prevent leaks.

4. Connect the hose to a tap with a 3/4”

thread. Always use the hose supplied with

the appliance.

The inlet hose must not be lengthened. If it is

too short and you do not wish to move the

tap, you will have to purchase a new, longer

hose specially designed for this type of use.

Installation should comply with local water

authority and building regulations require

ments. Check the minimum water pressure

required for safe operation of the appliance in

the chapter "Technical Data".

Installation

Water-stop device

The inlet hose is provided with a water stop device,

which protects against damage caused by water

leaks in the hose which could develop due to nat

ural ageing of the hose. This fault is shown by a

red sector in the window «A» . Should this occur,

turn the water tap off and refer to your Service

Centre to replace the hose.

Water drainage

The end of the drain hose can be positioned in three ways:

Hooked over the edge of a sink using the plastic hose guide supplied with the

machine.

In this case, make sure the end cannot come unhooked when the machine is emptying.

This could be done by tying it to the tap

with a piece of string or attaching it to the

wall.

In a sink drain pipe branch. This branch

must be above the trap so that the bend

is at least 60 cm above the ground.

Directly into a drain pipe at a height of

not less than 60 cm and not more than 90

cm.

The end of the drain hose must always be

ventilated, i.e. the inside diameter of the drain

pipe must be larger than the outside diameter

of the drain hose.

The drain hose must not be kinked.

Installation

The drain hose may be extended to a maximum of 4 metres. An additional drain hose and

joining piece is available from your local Service Centre.

Electrical connection

Information on the electrical connection is given on the rating plate on the inner edge of

the appliance door.

Check that your domestic electrical installation can take the maximum load required, also

taking into account any other appliances in use.

WARNING!

Connect the machine to an earthed socket.

WARNING!

The manufacturer does not accept any responsibility for damage or injury through

failure to comply with the above safety precaution.

WARNING!

The power supply cable must be easily accessible after installing the machine.

WARNING!

Should the appliance power supply cable need to be replaced, this must be carried

out by a Service Centre.

Environment concerns

The symbol on the product or on its packaging indicates that this product may not be

treated as household waste. Instead it should be taken to the appropriate collection point

for the recycling of electrical and electronic equipment. By ensuring this product is disposed

of correctly, you will help prevent potential negative consequences for the environment

and human health, which could otherwise be caused by inappropriate waste handling of

this product. For more detailed information about recycling of this product, please contact

your local council, your household waste disposal service or the shop where you purchased

the product.

Electrical connection

Packaging materials

The materials marked with the symbol are recyclable.

>PE<=polyethylene

>PS<=polystyrene

>PP<=polypropylene

This means that they can be recycled by disposing of them properly in appropriate collection

containers.

Ecological hints

To save water, energy and to help protect the environment, we recommend that you follow

these tips:

• Normally soiled laundry may be washed without prewashing in order to save detergent,

water and time (the environment is protected too!).

• The machine works more economically if it is fully loaded.

• With adequate pre-treatment, stains and limited soiling can be removed; the laundry

can then be washed at a lower temperature.

• Measure out detergent according to the water hardness, the degree of soiling and the

quantity of laundry being washed.

www.electrolux.com

132951780 - 00 - 312009

Aeg-Electrolux L74650LE Manual de usuario

Marca: Aeg-Electrolux

Modelo: L74650LE

Categoría: Lavadoras

Tipo: Manual de usuario

Descargar PDF

informe

En otros idiomas

English: Aeg-Electrolux L74650LE User manual

Aeg-Electrolux L74650LE Manual de usuario

Aeg-Electrolux L74650LE Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos