Yamaha CLP-795GP Manual de usuario

Marca: Yamaha

Modelo: CLP-795GP

Categoría: Pianos digitales

Tipo: Manual de usuario

Owner’s Manual

Mode d’emploi

CLP

785

CLP

775

CLP

745

CLP

735

CLP

795GP

CLP

765GP

Merci d'avoir choisi ce piano numérique de Yamaha !

Cet instrument offre une qualité de son et une expressivité exceptionnelles pour votre plus grand plaisir.

Afin d'exploiter votre Clavinova au maximum de ses performances et de ses fonctions, lisez entièrement ce mode

d'emploi et conservez-le afin de pouvoir le consulter ultérieurement.

Avant d’utiliser l’instrument, lisez attentivement la section « PRÉCAUTIONS D’USAGE » aux pages 4−6.

Pour plus d'informations sur l'assemblage de l'instrument, reportez-vous aux instructions figurant à la fin de ce

manuel.

Thank you for purchasing this Yamaha Digital Piano!

This instrument provides exceptionally high-quality sound and expressive control for your playing enjoyment.

In order to make the most of your Clavinova’s performance potential and features, please read this Owner’s Manual

thoroughly, and keep it in a safe place for later reference.

Before using the instrument, be sure to read “PRECAUTIONS” on pages 4−6.

For information on assembling the instrument, refer to the instructions at the end of this manual.

EnglishFrançais

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

1. IMPORTANT NOTICE: DO NOT MODIFY

THIS UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved

by Yamaha may void your authority, granted by the

FCC, to use the product.

2. IMPORTANT: When connecting this product to

accessories and/or another product use only high

quality shielded cables. Cable/s supplied with this

product MUST be used. Follow all installation

instructions. Failure to follow instructions could void

your FCC authorization to use this product in the

USA.

3. NOTE: This product has been tested and found to

comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices.

Compliance with these requirements provides a

reasonable level of assurance that your use of this

product in a residential environment will not result in

harmful interference with other electronic devices.

This equipment generates/uses radio frequencies

and, if not installed and used according to the

instructions found in the users manual, may cause

interference harmful to the operation of other

electronic devices. Compliance with FCC regulations

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

does not guarantee that interference will not occur in

all installations. If this product is found to be the

source of interference, which can be determined by

turning the unit “OFF” and “ON”, please try to

eliminate the problem by using one of the following

measures:

Relocate either this product or the device that is

being affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/

reorient the antenna. If the antenna lead-in is 300

ohm ribbon lead, change the lead-in to co-axial type

cable.

If these corrective measures do not produce

satisfactory results, please contact the local retailer

authorized to distribute this type of product. If you can

not locate the appropriate retailer, please contact

Yamaha Corporation of America, Electronic Service

Division, 6600 Orangethorpe Ave, Buena Park,

CA90620

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

FCC INFORMATION (U.S.A.)

* This applies only to products distributed by Yamaha Corporation of America. (FCC SDoC)

COMPLIANCE INFORMATION STATEMENT

(Supplierʼs declaration of conformity procedure)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Digital Piano

Model Name : CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including interference that may cause undesired operation.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9 Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong. The wide blade or the third

prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11 Only use attachments/accessories specified by

the manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table specified

by the manufacturer, or sold with

the apparatus. When a cart is

used, use caution when moving

the cart/apparatus combination

to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR

MOISTURE.

(UL60065_03)

For the AC adaptor

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

• This AC adaptor is designed for use with only Yamaha electronic

instruments. Do not use for any other purpose.

• Indoor use only. Do not use in any wet environments.

CAUTION

• When setting up, make sure that the AC outlet is easily accessible. If

some trouble or malfunction occurs, immediately turn off the power

switch of the instrument and disconnect the AC adaptor from the

outlet. When the AC adaptor is connected to the AC outlet, keep in

mind that electricity is flowing at the minimum level, even if the power

switch is turned off. When you are not using the instrument for a long

time, make sure to unplug the power cord from the wall AC outlet.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or

radiators. Also, do not excessively bend or otherwise damage the cord,

or place heavy objects on it.

• Only use the voltage specified as correct for the instrument. The

required voltage is printed on the name plate of the instrument.

• Use the specified adaptor (page 136 or page 138) only. Using the

wrong adaptor can result in damage to the instrument or overheating.

• Use only the supplied power cord/plug.

• Check the electric plug periodically and remove any dirt or dust which

may have accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the

instrument or attempt to disassemble or modify the internal

components in any way. If it should appear to be malfunctioning,

discontinue use immediately and have it inspected by qualified

Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or

wet conditions, or place on it any containers (such as vases, bottles or

glasses) containing liquids which might spill into any openings. If any

liquid such as water seeps into the instrument, turn off the power

immediately and unplug the power cord from the AC outlet. Then have

the instrument inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning item

may fall over and cause a fire.

(For information on whether Bluetooth functionality is included or not,

refer to page 142.)

• Radio waves may affect electro-medical devices.

- Do not use this product near medical devices or inside areas in

which the use of radio waves is restricted.

- Do not use this product within 15cm (6 in.) of persons with a heart

pacemaker or defibrillator implant.

For the AC adaptor

For the instrument

Power supply/AC adaptor

Do not open

Water warning

Fire warning

Influences on electro-medical devices

(if Bluetooth functionality is included)

DMI-7 1/3

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

• Do not place the bench in an unstable position where it might

accidentally fall over.

• Do not play carelessly with or stand on the bench. Using it as a tool or

stepladder or for any other purpose might result in accident or injury.

• Only one person should sit on the bench at a time, in order to prevent

the possibility of accident or injury.

• If the bench screws become loose due to extensive long-term use,

tighten them periodically using the specified tool in order to prevent

the possibility of accident or injury.

• Keep special watch over any small children so that they don’t fall off

the rear of the bench. Since the bench does not have a backrest,

unsupervised use may result in accident or injury.

• When one of the following problems occur, immediately turn off the

power switch and disconnect the electric plug from the outlet. Then

have the device inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

- If any cracks or breakages exist on the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-

connector. Doing so can result in lower sound quality, or possibly

cause overheating in the outlet.

• When removing the electric plug from the instrument or an outlet,

always hold the plug itself and not the cord. Pulling by the cord can

damage it.

• Remove the electric plug from the outlet when the instrument is not to

be used for extended periods of time, or during electrical storms.

• Assemble the instrument in the proper sequence by following the

assembly instructions in this manual. Also, make sure to tighten the

screws regularly. Failure to do so might result in damage to the

instrument or even injury.

• Do not place the instrument in an unstable position where it might

accidentally fall over.

• Do not go near the instrument during an earthquake. Strong shaking

during an earthquake could cause the instrument to move or tip over,

resulting in damage to the instrument or its parts, and possibly

causing injury.

• (CLP-785, CLP-775, CLP-745, CLP-735) When transporting or

moving the instrument, always use two or more people. Attempting to

lift the instrument by yourself may damage your back, result in other

injury, or cause damage to the instrument itself.

• (CLP-795GP, CLP-765GP) Since this product is very heavy, make sure

that a sufficient number of people are on hand to help, so you can lift

and move it safely and easily. Attempting to lift or move the instrument

by force may damage your back, result in other injury, or cause

damage to the instrument itself.

• Before moving the instrument, remove all connected cables, to prevent

damage to the cables or injury to anyone who might trip over them.

• When setting up the product, make sure that the AC outlet you are

using is easily accessible. If some trouble or malfunction occurs,

immediately turn off the power switch and disconnect the plug from the

outlet. Even when the power switch is turned off, electricity is still

flowing to the product at the minimum level. When you are not using

the product for a long time, make sure to unplug the power cord from

the wall AC outlet.

• Before connecting the instrument to other electronic components, turn

off the power for all components. Before turning the power on or off for

all components, set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels

and gradually raise the volume controls while playing the instrument to

set the desired listening level.

• Do not insert a finger or hand in any gaps on the key cover or

instrument. Also take care that the key cover does not pinch your

finger.

• Never insert or drop paper, metallic, or other objects into the gaps on

the key cover, panel or keyboard. This could cause physical injury to

you or others, damage to the instrument or other property, or

operational failure.

• (CLP-785) Do not apply excessive force when closing the key cover. A

key cover equipped with the SOFT-CLOSE™ mechanism closes the

cover slowly. Applying excessive force to the key cover when closing it

could damage the SOFT-CLOSE™ mechanism, and possibly result in

injury to your hands and fingers caught under the closing key cover.

• Do not rest your weight on, or place heavy objects on the instrument,

and do not use excessive force on the buttons, switches or connectors.

• Keep small parts out of the reach of infants. Your children may

accidentally swallow them.

Using the bench (If included)

If you notice any abnormality

Power supply/AC adaptor

Assembly

Location

Connections

Handling caution

DMI-7 2/3

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

• Do not use the instrument/device or headphones for a long period of

time at a high or uncomfortable volume level, since this can cause

permanent hearing loss. If you experience any hearing loss or ringing

in the ears, consult a physician.

• For benches that can be adjusted, do not adjust the bench height while

sitting on the bench, since this can cause excessive force to be

imposed on the adjustment mechanism, possibly resulting in damage

to the mechanism or even injury.

• Do not place your hand between moving parts. Otherwise, your hand

could be pinched between the parts, possibly resulting in injury.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (power lamp

is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you

unplug the power cord from the wall AC outlet.

Yamaha cannot be held responsible for damage caused by improper

use or modifications to the instrument, or data that is lost or

destroyed.

Using the bench (If included)

DMI-7 3/3

(bottom_en_01)

The model number, serial number, power requirements, etc., may be found on

or near the name plate, which is at the bottom of the unit. You should note this

serial number in the space provided below and retain this manual as a

permanent record of your purchase to aid identification in the event of theft.

Model No.

Serial No.

The name plate

is located on the

bottom of the

unit.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

NOTICE

To avoid the possibility of malfunction/ damage to the

product, damage to data, or damage to other property,

follow the notices below.

 Handling

• Do not connect this product to public Wi-Fi and/or Internet

directly. Only connect this product to the Internet through a

router with strong password-protections. Consult your router

manufacturer for information on security best practices.

• Do not use the instrument in the vicinity of a TV, radio, stereo

equipment, mobile phone, or other electric devices.

Otherwise, the instrument, TV, or radio may generate noise.

When you use the instrument along with an application on

your smart device such as a smartphone or tablet, we

recommend that you set Wi-Fi or Bluetooth to on after setting

“Airplane Mode” to on on that device in order to avoid noise

caused by communication.

• Do not expose the instrument to excessive dust or vibrations,

or extreme cold or heat (such as in direct sunlight, near a

heater, or in a car during the day) to prevent the possibility of

panel disfiguration, damage to the internal components or

unstable operation. (Verified operating temperature range:

5° – 40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the

instrument, since this might discolor the panel or keyboard.

• In the case of a model with a polished finish, bumping the

surface of the instrument with metal, porcelain, or other hard

objects can cause the finish to crack or peel. Use caution.

 Maintenance

• When cleaning the instrument, use a soft and dry/slightly

damp cloth. Do not use paint thinners, solvents, alcohol,

cleaning fluids, or chemical-impregnated wiping cloths.

• In the case of a model with a polished finish, gently remove

dust and dirt with a soft cloth. Do not wipe too hard since

small particles of dirt can scratch the instrument’s finish.

• During extreme changes in temperature or humidity,

condensation may occur and water may collect on the surface

of the instrument. If water is left, the wooden parts may

absorb the water and be damaged. Make sure to wipe any

water off immediately with a soft cloth.

 Saving data

• Some of the data of this instrument (page 104) and the Song

data saved to the internal memory of this instrument

(page 54) are retained when the power is turned off. However,

the saved data may be lost due to some failure, an operation

mistake, etc. Save your important data onto USB flash drive or

an external device such as a computer (page 76). Before using

a USB flash drive, make sure to refer to page 74.

• To protect against data loss through USB flash drive damage,

we recommend that you save your important data onto spare

USB flash drive or an external device such as a computer as

backup data.

Information

 About copyrights

• Copying of the commercially available musical data including

but not limited to MIDI data and/or audio data is strictly

prohibited except for your personal use.

• This product incorporates and bundles contents in which

Yamaha owns copyrights or with respect to which Yamaha has

license to use others’ copyrights. Due to copyright laws and

other relevant laws, you are NOT allowed to distribute media

in which these contents are saved or recorded and remain

virtually the same or very similar to those in the product.

* The contents described above include a computer program,

Accompaniment Style data, MIDI data, WAVE data, voice

recording data, a score, score data, etc.

* You are allowed to distribute medium in which your

performance or music production using these contents is

recorded, and the permission of Yamaha Corporation is not

required in such cases.

 About functions/data bundled with the

instrument

• Some of the preset songs have been edited for length or

arrangement, and may not be exactly the same as the original.

• This device is capable of using various types/formats of music

data by optimizing them to the proper format music data for

use with the device in advance. As a result, this device may

not play them back precisely as their producers or composers

originally intended.

• The bitmap fonts used in this instrument have been provided

by and are the property of Ricoh Co., Ltd.

 About this manual

• The illustrations and LCD screens as shown in this manual

are for instructional purposes only, and may appear

somewhat different from those on your instrument.

• Windows is a registered trademark of Microsoft® Corporation

in the United States and other countries.

• iPhone, iPad are trademarks of Apple Inc., registered in the

U.S. and other countries.

• The letters at the end of the model name (such as “B,” “WA”)

indicate the color or finish of the instrument. Since they

simply indicate the appearance, these letters are omitted in

this manual.

• The Bluetooth® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Yamaha Corporation is under license.

• The company names and product names in this manual are

the trademarks or registered trademarks of their respective

companies.

 Tuning

• Unlike an acoustic piano, this instrument does not need to be

tuned by an expert (although the pitch can be user-adjusted to

match other instruments). This is because the pitch of digital

instruments is always maintained perfectly.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Included Accessories

 Owner’s Manual (this book)



“50 Classical Music Masterpieces” (Music Book)

 Online Member Product Registration

 Power cord*, AC adaptor*

 Bench*

 Wa rr anty *

* May not be included depending on your area. Check

with your Yamaha dealer.

About the Manuals

This instrument has the following documents and

instructional materials.

Included Documents

Owner’s Manual (this book)

This document explains how to use the

Clavinova.

• Introduction:

This section explains how to set up and start using your

Clavinova. Setup is so simple, you can start playing right

away.

•Main Operations:

This section explains various functions useful for your

practice, such as Preset Song playback and Song

recording.

• Detailed Settings:

This section explains how to make detailed settings for

the Clavinova’s various functions. Refer to this section as

necessary.

• Appendix:

This section introduces Message List, a description of

Preset Voices, and other reference material.

Online Materials (Downloadable from

the web)

Data List (CLP-785 and CLP-795GP only)

This document contains lists of XG Voices

and XG Drum Kit that can be selected on the

CLP-785 and CLP-795GP.

Smart Device Connection Manual

Explains how to connect the instrument to a

smart device such as smartphone or tablet, etc.

Computer-related Operations

Includes instructions on connecting this

instrument to a computer, and operations

related to transferring song data.

MIDI Reference

Contains the MIDI-related information.

To obtain these manuals, access the Yamaha

Downloads, enter the model name for searching

the desired files.

Icons on this manual

Example:

This indicates that the relevant function is only

available on certain models. These icons indicate that

the function is available on the CLP-785 but not on

the CLP-775, CLP-745, CLP-735, CLP-795GP or

CLP-765GP.

785 775 745 735 795GP 765GP

Yamaha Downloads

https://download.yamaha.com/

Smart Device App “Smart Pianist”

Enjoy easy operation by connecting your smart

device. To use this, you’ll need to install the “Smart

Pianist” app (free for download). For details, refer to

“Using a Smart Device App” on page 80.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Table of Contents

PRECAUTIONS ....................................................4

NOTICE ......................................................................7

Information ................................................................7

Included Accessories ..................................................8

About the Manuals .....................................................8

Features .....................................................................10

Introduction 12

Panel Controls and Terminals .................................12

Getting Started — Playing the Clavinova ................15

Turning the Power On or Off .............................................15

Music Rest .............................................................................18

Lid ...........................................................................................20

Setting the Volume — [MASTER VOLUME] ..................21

Using Headphones ...............................................................21

Using the Pedals ....................................................................23

Basic Operations .......................................................24

Main Operations 26

Enjoying the Piano Performance .............................26

Selecting two Grand Piano Voices from the panel directly 26

Customizing the Sound and the Touch Response of Piano

Voices (Piano Room) ...........................................................27

Playing Various Musical Instrument Sounds (Voices) 30

Selecting Voices ....................................................................30

Listening to the Voice Demos .............................................32

Enhancing and Customizing the Sound ............................33

Playing Two Voices Simultaneously (Dual) .....................35

Splitting the Keyboard Range and Playing Two Different

Voices (Split Mode) ..............................................................36

Using Dual and Split Simultaneously ................................37

Playing Duo ...........................................................................38

Using the Metronome ..........................................................39

Playing the Keyboard along with Rhythm Playback 42

Playing Back Songs ...................................................43

Song Playback .......................................................................44

Playing a One-hand Part — Part Cancel Function

(MIDI Songs) ........................................................................48

Playing Back a Song Repeatedly .........................................49

Adjusting the Volume Balance ...........................................52

Useful Playback Functions ..................................................53

Recording Your Performance ..................................54

Recording Methods ..............................................................54

Quick MIDI Recording ........................................................55

MIDI Recording — Independent Tracks ..........................57

MIDI Recording to the USB Flash Drive ..........................59

Audio Recording to the USB Flash Drive .........................60

Other Recording Techniques ..............................................61

Handling Song Files .................................................65

Basic Song File Operation ................................................... 66

Deleting Files — Delete ....................................................... 67

Copying Files — Copy ......................................................... 68

Moving Files — Move ......................................................... 68

Convert a MIDI Song to an Audio Song during Playback —

MIDI to Audio ...................................................................... 69

Renaming Files — Rename ................................................. 70

Connections ..............................................................71

Connectors ............................................................................ 71

Connecting to an Audio Player ([AUX IN] jack) ............ 72

Using an External Speaker System for Playback

(AUX OUT [L/L+R]/[R] jacks) .......................................... 73

Connecting USB Devices (USB [TO DEVICE] Terminal)

................................................................................................. 74

Connecting External MIDI Devices (MIDI Terminals) . 75

Connecting to a Computer (USB [TO HOST] Terminal)

................................................................................................. 76

Connecting to a Smart Device ............................................ 77

Using a Smart Device App .................................................. 80

Detailed Settings (Menu Display) 86

Common Operations in the Menu Displays ............86

Voice Menu ...............................................................87

Song Menu ................................................................92

Metronome/Rhythm Menu ......................................95

Recording Menu .......................................................96

System Menu .............................................................97

Appendix 106

Preset Voice List .....................................................106

Song List .................................................................109

Rhythm List ............................................................110

Message List ............................................................111

Troubleshooting .....................................................113

Assembling the Clavinova ......................................115

Specifications ..........................................................134

Index .......................................................................140

About Bluetooth .....................................................142

For information on whether Bluetooth functionality is

included or not, refer to page 142.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Full-scale piano performance

GrandTouch Keyboard and GrandTouch-S Keyboard

The CLP-700 series models feature a special keyboard, which remarkably reproduces the authentic touch and feel of an

actual grand piano. Its mechanism provides exceptionally expressive control from pianissimo to fortissimo. Moreover,

the keys of the GrandTouch Keyboard (CLP-785, CLP-775 and CLP-795GP) have a long pivot point distance (length

from the front side to the pivot point), for a more natural feeling, even when playing the inner part of a key.

Two world-renowned concert grand pianos page 26

All models feature piano sounds created with samples of the Yamaha CFX flagship concert grand piano and the famed

Vienna-made Bösendorfer grand piano. The sound of the Yamaha CFX is powerful, sparkling and with a rich bass

resonance. On the other hand, the Bösendorfer sound is soft and deep in the mid to bass range and beautiful for

pianissimo parts. You can select the one that best matches the music you want to play.

* Bösendorfer is a subsidiary company of Yamaha.

Piano Room feature for adjusting touch and resonance page 27

From the Piano Room displays, you can adjust various parameters such as string resonance and touch response. You

can also listen to the demo for VRM, which reproduces luxurious string and soundboard resonance, and the demo for

Grand Expression Modeling, which recreates the subtle changes in the sound that respond to your touch.

• VRM effect for reproducing the distinctive reverberation of a grand piano

The VRM function on all models simulates the luscious resonance effect on acoustic pianos—where the

sound of one string causes sympathetic vibration in other strings and the soundboard. You can vary the

sound expressively by changing the timing of your pressing the keys, and the timing and depth of your

pressing the pedal.

• Grand Expression Modeling for superbly expressive sound

On an actual acoustic piano, subtle changes in the sound can be produced by changing your playing touch

from when you press a key to when you release it. The Grand Expression Modeling technology recreates

these subtle changes in the sound that respond to your touch. This allows you to add accents by playing

strongly or add resonance by playing softly to produce superbly expressive sound.

Realistic feeling of being immersed in the sound

—even when using headphones page 22

When headphones are connected, the sounds of the CFX and Bösendorfer automatically switch to binaural sampling

sound—which gives the impression of being immersed in the sound, as if it was actually emanating from the piano.

When other piano Voices are selected, the Stereophonic Optimizer effect reproduces a natural sound distance.

Features

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Convenient performance functions

Rhythm Tracks page 42

All models feature twenty different simple rhythm patterns (drums and bass accompaniment) that are perfectly suited

to many types of music regularly performed on the piano, for even greater performance potential.

Preset Songs for effective practicing page 43

Also built into this instrument are 50 classical music masterpieces, plus 303 lesson Songs for mastering the piano. You

can simply enjoy listening to these built-in Songs, or use them for separate right-hand/left-hand practicing.* The 303

lesson Songs consist of practice pieces taken from various standard piano instruction manuals, including “The Virtuoso

Pianist.”

*The part on/off function is available only for MIDI songs that have both right- and left-hand parts.

Two recording methods page 54

The instrument lets you save your performance to internal memory or a USB flash drive (sold separately). You can

record your performance using one of two methods, MIDI or Audio recording, according to your needs. MIDI

recording is ideal for making independent tracks—for example, recording a right-hand part to Track 1 first, and then a

left-hand part to Track 2—allowing you to create pieces that would be difficult to play live with both hands together.

Audio recording on the other hand, saves recorded data in stereo, CD-quality WAV format to a USB flash drive, for

storing to computer and playing on portable music players.

Connecting to a Smart Device page 77

By connecting this instrument to a smart device such as smart phone or tablet, you can enjoy compatible smart device

apps. In addition, you can input the audio from a smart device to this instrument via Bluetooth* and hear it through the

built-in speakers of the instrument.

*The models CLP-785, CLP-775, CLP-745, CLP-795GP and CLP-765GP are equipped with Bluetooth functionality; however, even these

models may not support Bluetooth, depending on the country in which you purchased the product. For details, refer to page 142.

Fortepiano Voices—authentic classical period

piano sounds

All models feature authentic sounds created with samples of

actual fortepianos—pianos which were made in the era of Mozart,

Beethoven and Chopin. Enjoy performing with the actual sounds

used in the era that classical music masterpieces were composed.

Refer to page 30 for selecting Voices.

*The fortepiano shown in the picture is from the collection of at the

Hamamatsu Museum of Musical Instruments.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Introduction

Panel Controls and Terminals

On the CLP-785/775/795GP, the control panel lights up when the power is turned on, and you can control

it by pressing the panel indications or icons. Be sure to read “Turning the Power On or Off” on page 15,

then turn on the power and check the panel.

Control Panel (page 24)

[ ] (Standby/On) switch.................... page 16

For turning the power on or setting it to standby.

[MASTER VOLUME] slider ............... page 21

For adjusting the overall volume.

[ ]/[ ]/[<]/[>] buttons, display......... page 24

For selecting an item or setting a value using the

buttons corresponding to the display indication.

You cannot operate the display directly by pressing it

with your finger.

[ ]/[FUNCTION] button ................. page 86

Pressing this button alternates the displays among

the menus: “Voice,” “Song,” “Metronome/Rhythm,”

“Recording” and “System”—from which you can

make detailed settings for the related functions. With

the CLP-745 and CLP-765GP, this is also used for

connecting to a Bluetooth-equipped device such as a

smart device (page 78).

[ ]/[EXIT] button ............................ page 25

Pressing this button exits from the current display, or

returns to the Voice or Song display.

[](Bluetooth) button (

CLP-785/775/795GP

)

............................................................. page 78

Used for connecting to a Bluetooth-equipped device

such as a smart device.

A-1 B-1 C0 D0 E0 F0 G0 A0 B0

785 775 745 735

CLP-735

795GP 765GP

In this manual, the [ ] button is hereafter referred

to as the [FUNCTION] button, and the [ ] button

is referred to as the [EXIT] button.

Bluetooth capability

Depending on the country in which you purchased

the product, the instrument may not have Bluetooth

capability. If the Bluetooth logo is shown or printed

on the control panel, this means that the product is

equipped with Bluetooth functionality.

Panel Controls and Terminals

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

[CFX GRAND] button........................ page 26

For selecting the “CFX Grand” Voice.

[BÖSENDORFER] button.................. page 26

For selecting the “Bösendorfer” Voice.

[VOICE] button .................................. page 30

Calls up the Voice group list display.

[DUAL/SPLIT] button ........... pages 35, 36, 37

For playing two Voices simultaneously, or different

Voices on the left- and right-hand sections of the

keyboard.

[PIANO ROOM] button ..................... page 27

Calls up the Piano Room display where you can

select an optimum piano sound and adjust the touch

response.

[SONG/DEMO] button ...................... page 43

Calls up Song List for selecting a demo Song or a

Song to playback or edit.

[REC] button....................................... page 54

For recording your keyboard performance.

[PLAY/PAUSE] button........................ page 44

For alternately playing back and pausing the Preset

Songs or your recorded material.

[METRONOME] button..................... page 39

For using the metronome functions.

[RHYTHM] button............................. page 42

For using the rhythm functions.

[TEMPO] button ................................ page 39

For setting the tempo.

C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7

Each key has a note name; for example, the lowest (farthest left) key on the keyboard

corresponds to A-1, and the highest (farthest right) key to C7.

See the next page for overall views of the

instruments, and their jacks and terminals.

Panel Controls and Terminals
14
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual
Overall views, jacks and terminals 
Key cover (page 15)
Music rest (page 18)
Pedals (page 23)
Music braces 
(page 19)
Music rest (page 19)
Key cover
(page 15)
Pedals (page 23)
Terminal panel
(page 71)
Terminal panel
(page 71)
USB
[TO DEVICE]
terminal
(page 74)
USB
[TO DEVICE]
terminal
(page 74)
CLP-785
CLP-775, 745, 735
(CLP-775)
Terminal panel
(page 71)
[PHONES] jacks 
(page 21)
[PHONES]
jacks
(page 21)
(CLP-745, 735)
Terminal panel
(page 71)
CLP-795GP, 765GP
Music braces 
(page 19)
Key cover (page 15)
DC IN jack (page 15)
Pedals (page 23)
[PHONES] jacks
(page 21)
Lid (page 20)
Music rest 
(page 19)
(CLP-765GP)
Terminal panels
(page 71)
Music braces (page 18)
DC IN jack (page 15)
(CLP-775)
DC IN jack
(page 15)
(CLP-745, 735)
DC IN jack (page 15)
(CLP-795GP)
Terminal panel (page 71)

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Getting Started — Playing the Clavinova

This section explains how to set up and start using your Clavinova. Setup is so simple, you can start playing

right away.

1. Connect the plugs of the AC adaptor in the order shown in

the illustration.

2. Open the key cover.

2-1. With both hands, hold the hand grip, then lift and open the

key cover.

2-2. Fold down the top of the key cover.

Turning the Power On or Off

adaptor

AC outlet

DC IN jack (page 14)

Power cord

DC plug

AC plug

1-1

1-2

1-3

785 775 745 735 795GP 765GP

The shape of the plug and

outlet differ depending on

your locale.

adaptor

AC outlet

DC IN jack (page 14)

Power cord

DC plug

AC plug

1-1

1-2

1-3

785 775 745 735 795GP 765GP

The shape of the plug and

outlet differ depending on

your locale.

785 775 745 735 795GP 765GP

2-2

Be careful to avoid catching your fingers

when opening or closing the cover.

CAUTION

2-1

WARNING

Use the specified adaptor

(page 136 or page 138) only.

Using the wrong AC adaptor

can result in damage to the

instrument or overheating.

CAUTION

When setting up the product,

make sure that the AC outlet

you are using is easily

accessible. If some trouble

or malfunction occurs,

immediately turn the power

off and disconnect the plug

from the outlet.

NOTE

When disconnecting the power

cord/AC adaptor, first turn off

the power, then follow this

procedure in reverse order.

CAUTION

• Do not place anything

(such as metal objects or

pieces of paper) on top of

the key cover. Small

objects placed on the key

cover may fall inside the

unit when the cover is

opened and may be nearly

impossible to remove.

Once inside, they could

cause electric shock, short

circuit, fire or other serious

damage to the instrument.

• Hold the cover with both

hands when opening or

closing it. Do not release it

until it is fully opened or

closed. Be careful to avoid

catching fingers (yours or

others, especially

children’s) between the

cover and the unit.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Getting Started — Playing the Clavinova

Lift the cover slightly, then

push and slide it to the end.

3. Turn down the [MASTER VOLUME] slider

at the right of the keyboard to “MIN.”

4. Press the [] (Standby/On) switch at the right of the

keyboard to turn the power on.

The display located at the left of the keyboard and the power lamp on the

[](Standby/On) switch both light up.

On the CLP-785/775/795GP, the control panel lights up, and automatically

turns off if you do not press it for a while. Simply press anywhere on the control

panel to turn it on again.

5. Play the keyboard.

While playing the keyboard, adjust the volume level by using the [MASTER

VOLUME] slider. For details, refer to “Setting the volume — [MASTER

VOLUME]” on page 21.

Be careful to avoid catching your fingers

when opening or closing the cover.

CAUTION

785 775 745 735 795GP 765GP

NOTICE

Press only the [](Stand by/

On) switch when turning the

power on. Any other

operations, such as pressing

the keys, buttons or pedals may

cause the instrument to

malfunction.

The power

lamp lights up.

NOTE

(CLP-785/775/795GP) You can

change the time that elapses

until the control panel turns off,

or you can set it to remain on

indefinitely. For details, refer to

“Auto Backlight Off” on

page 101.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Getting Started — Playing the Clavinova

6. After you use the instrument, press and hold the

[] (Standby/On) switch for a second to turn the power

off.

The power lamp on the [ ] (Standby/On) switch is turned off.

7. Close the key cover.

7-1. If the music rest is unfolded,

fold it back.

7-2. With both hands, open the

folded top of the key cover,

and close it gently.

The key cover is equipped with the

special SOFT-CLOSE™ mechanism

which closes the cover slowly.

Slide the cover toward you

and gently lower the cover

over the keys.

Auto Power Off function

To prevent unnecessary power consumption, this instrument features an Auto

Power Off function that automatically turns the power off if the instrument is

not operated for a specified period of time. The amount of time that elapses

before the power is automatically turned off is approximately 30 minutes by

default; however, you can change the setting (page 101).

CAUTION

Even when the [] (Standby/

On) switch is in standby

status, electricity is still

flowing to the instrument at

the minimum level. Remove

the electric plug from the

outlet when the instrument is

not to be used for extended

periods of time, or during

electrical storms.

CAUTION

(CLP-785) Do not apply

excessive force when closing

the key cover. Applying

excessive force to the key

cover when closing it could

damage the SOFT-CLOSE™

mechanism, and possibly

result in injury to your hands

and fingers caught under the

closing key cover.

Be careful to avoid catching your fingers

when opening or closing the cover.

CAUTION

785 775 745 735 795GP 765GP

Be careful to avoid catching your fingers

when opening or closing the cover.

CAUTION

785 775 745 735 795GP 765GP

NOTICE

•Any data which are not saved

will be lost if the power

automatically turns off. Make

sure to save your data before

this happens.

• Depending on the instrument

status, the power may not

turn off automatically, even

after the specified period of

time elapses. Always turn off

the power manually when the

instrument is not in use.

Disabling Auto Power Off (simple method)

Turn the power on while holding down the lowest key on the keyboard. An

“Auto power off disabled” message appears briefly and Auto Power Off is

disabled.

The lowest key

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Getting Started — Playing the Clavinova

Fold down the top of the key cover (see step 2 on page 15) when using the

music rest.

Unfold the music rest:

1. Unfold the music rest, which is on the inside of the key cover.

2. Unfold the music braces, which allow you to hold the pages of music

books in place.

Fold the music rest:

1. Fold the music braces if they are unfolded.

2. Fold the music rest before closing the key cover.

Music Rest

785 775 745 735 795GP 765GP

NOTICE

Do not put anything heavy on

the music rest for a long period

of time. Doing so may damage

the music rest.

Music brace

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Getting Started — Playing the Clavinova

To raise the music rest:

Pull the music rest up and toward

yourself as far as it will go.

2. Flip down the two metal

supports at the left and right on

the rear of the music rest.

3. Lower the music rest so that the

metal supports latch into place.

Music braces allow you to hold the

pages of music books in place.

To lower the music rest:

Close the Music braces if they are open,

and then lower the music rest by

following the instructions below.

1. Pull the music rest toward

yourself as far as it will go.

2. Raise the two metal supports

(at the rear of the music rest).

3. Gently lower the music rest

backward until it is all the way

down.

785 775 745 735 795GP 765GP

Music braces

CAUTION

Do not try to use the music

rest in a half-raised position.

Also, when raising or

lowering the music rest, do

not release your hands from

the music rest until it is all

the way up or down.

Music braces

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Getting Started — Playing the Clavinova

To open the lid:

Raise and hold the right side of

the lid (viewed from the

keyboard end of the instrument).

2. Raise the lid stay and carefully

lower the lid so that the end of

the stay fits into the recess in

the lid.

To close the lid:

1. Hold the lid stay and carefully

raise the lid.

2. Hold the lid in its raised

position and lower the lid stay.

3. Carefully lower the lid.

Lid

785 775 745 735 795GP 765GP

WARNING

• Do not let children open or

close the lid. Also, be

careful to avoid catching

fingers (yours or others,

and especially those of

children) when raising or

lowering the lid.

• (CLP-795GP) Do not use

the outer recess for the

longer stay. Doing so

makes the lid unstable and

may cause it to fall,

resulting in damage or

injury.

• Make sure that the end of

the stay fits securely in the

lid recess. If the stay is not

properly seated in the

recess, the lid may fall,

causing damage or injury.

• Be careful that you or

others do not bump the

stay while the lid is raised.

The stay may be dislodged

from the lid recess causing

the lid to fall.

For the longer stay, use the inner recess, and for the shorter stay, use the

outer recess to support the lid.

785 775 745 735 795GP 765GP

Longer stay

Shorter stay

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Getting Started — Playing the Clavinova

To adjust the volume, use the [MASTER VOLUME]

slider located at the right of the keyboard. Play the

keyboard to actually produce sound while you

adjust the volume.

Intelligent Acoustic Control (IAC)

IAC is a function which automatically adjusts and controls the sound quality

according to the overall volume of the instrument. Even when playing the

instrument with the overall volume turned down, it permits both low sounds

and high sounds to be clearly heard. IAC Control is effective only from the

sound output of the instrument speakers.

You can set the IAC setting On or Off and its depth. For details, refer to “IAC”

on page 98 and “IAC depth” on page 99. The default setting for this function is

“On.”

Connect a pair of headphones to one of the [PHONES] jacks. When the headphones are plugged into either

of the [PHONES] jacks, the internal speaker system is automatically shut off. Two [PHONES] jacks are

provided. Two sets of standard stereo headphones can be plugged in. (If you are using only one pair of

headphones, you can plug them into either of these jacks.)

CAUTION

Do not use the headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent

hearing loss.

NOTE

• If you are using an adaptor plug, be sure to remove this as well when unplugging the headphones. No sound will come out of the

instrument’s speakers if the adaptor plug is left connected.

• You can also hear sound through the speakers with the headphones plugged in. For details, refer to “Speaker” on page 100.

Setting the Volume — [MASTER VOLUME]

Decreases

the level.

Increases

the level.

Master Volume: The volume

level of the entire keyboard

sound.

Adjusting the [MASTER

VOLUME] slider also affects

the output level of the

[PHONES] jacks and the

output level of the AUX OUT

jacks.

CAUTION

Do not use the instrument for

a long period of time at a

high or uncomfortable

volume level, since this can

cause permanent hearing

loss.

Using Headphones

785 775 745 735 795GP 765GP 785 775 745 735 795GP 765GP

Standard stereo

phone plug

Standard stereo

phone plug

Underside of

keyboard

785 775 745 735 795GP 765GP

Standard stereo

phone plug

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Getting Started — Playing the Clavinova

You can conveniently hang the headphones on the instrument when not using

them. Install the headphone hanger by following the instruction at the end of

this manual (CLP-785: page 119, CLP-775: page 122, CLP-745/735: page 125,

CLP-795GP: page 129, CLP-765GP: page 133).

Reproducing the Natural Sensation of Sound Distance

—Binaural Sampling and Stereophonic Optimizer

This instrument features two advanced technologies that allow you to enjoy

exceptionally realistic, natural piano sound, even when listening on

headphones.

Binaural Sampling

Binaural sampling is a method that uses two special microphones set at the ear

position of a performer and records the sound from a piano as it is. Listening to

the sound with this effect through headphones gives the impression of being

immersed in the sound, as if it was actually emanating from the piano. When

“CFX Grand” or “Bösendorfer” (page 26) is selected, connecting the

headphones automatically enables binaural sampling sound.

Stereophonic Optimizer

The Stereophonic Optimizer is an effect which reproduces natural sound

distance like the sound of binaural sampling even though you hear it on

headphones. When any other Voice in the Piano group besides “CFX Grand” or

“Bösendorfer” is selected, connecting the headphones automatically enables

the Stereophonic Optimizer.

Sampling

A technology which records

the sounds of an acoustic

instrument then stores them to

the tone generator to be played

based on information received

from the keyboard.

NOTE

Voices in the Piano group are

those contained in the “Piano”

category in the Preset Voice

List (page 106). For details

about selecting Voices, refer to

page 26.

NOTE

Before connecting an external

powered speaker system, be

sure to read “Connections”

(page 71).

This function is turned on by default. Note that when the “Speaker” setting

(page 100) is On, this function will always be disabled. Since these sounds are

optimized for listening with headphones, we recommend that you set this

function to “OFF” in the following situations.

• Playing the piano sound of this instrument with an external powered speaker

system, while monitoring the sound output from this instrument on

connected headphones.

• Making an audio recording (page 54) while using headphones, and then

playing that recorded audio Song through speakers of this instrument. (Make

sure to turn off these functions before audio recording.)

For details on setting this On or Off, refer to “Binaural” on page 99.

NOTICE

Do not hang anything other

than the headphones on the

hanger. Otherwise, the

instrument or the hanger may

be damaged.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Getting Started — Playing the Clavinova

This instrument is equipped with three foot pedals:

damper pedal (right), sostenuto pedal (center), and

soft pedal (left).

Damper pedal (right pedal)

When you press the damper pedal, the notes you play

have a longer sustain.

When you select a Voice in the Piano group, pressing

the damper pedal activates the VRM (page 28) to

accurately recreate the unique resonance of an

acoustic grand piano’s soundboard and strings.

Sostenuto pedal (center pedal)

If you play a note or chord on the keyboard and

press the sostenuto pedal while holding the note(s),

the notes will sustain as long as the pedal is held.

All subsequent notes will not sustain.

Soft pedal (left pedal)

The soft pedal reduces the volume and slightly changes the timbre of notes

played while the pedal is pressed. The soft pedal will not affect notes that are

already playing when it is pressed. In order to apply this effect, play notes after

pressing the pedal.

Keep in mind that this pedal function will be changed from the Soft pedal

depending on the selected Voice. When the “Mellow Organ” is selected,

pressing and releasing this pedal switches between “fast” and “slow” of the

Rotary Speaker speed (“Rotary Speed” on page 88). When the “Vibraphone” is

selected, this pedal switches Vibrato on and off (“VibeRotor” on page 88).

Using the Pedals

When you press the damper

pedal here, the notes you

play before you release the

pedal have a longer sustain.

NOTE

Voices in the Piano group are

those contained in the “Piano”

category in the Preset Voice

List (page 106). For details

about selecting Voices, refer to

page 26.

NOTE

You can assign other functions

to each pedal by using “Pedal

Assign” in “Voice” menu

display (page 89).

Half-pedal function

This instrument also has a Half-pedal function which allows you to use half-damper

techniques, in which the damper is pressed somewhere between all the way down and all

the way up. In this half-damper state (on a real piano), the damper felts only partially

mute the strings. The Half-pedal function on the Clavinova lets you delicately and

expressively control the damper muting, and create subtle nuances in your performance,

by finely controlling the point at which pressure on the pedal affects the damper muting.

For details on setting this, refer to “Half Pedal Point” on page 98.

GP Response Damper Pedal

The damper pedal of the CLP-785, CLP-775 and CLP-795GP is the GP Response Damper

Pedal. This special pedal has been designed to provide enhanced tactile response and,

when pressed, is much closer in feel to the pedal of an actual grand piano. It makes it

easier to physically experience the half-pedal point and more easily apply the half-pedal

effect than other pedals. Since the pressing sensation may vary depending on the

situation, including the location where the instrument is installed, you should adjust the

half-pedal point described above to the desired setting.

785 775 745 735 795GP 765GP

NOTE

The pedals are covered with

vinyl covers when shipped

from the factory. If your

instrument features the GP

Response Damper Pedal,

remove the cover from the

damper pedal for optimum use

of the pedal effect.

When you press the sostenuto

pedal here while holding the

note(s), the notes will sustain as

long as you hold the pedal.

NOTE

While the sostenuto (center)

pedal is held, a sustained (non-

decaying) type of Voice such

as strings or organ may sound

continuously without decay

after the notes have been

released.

NOTE

The center pedal or left pedal

can also be used as a [PLAY/

PAUSE] button. For details on

the settings, refer to “Play/

Pause” on page 98.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Basic Operations

On the screen display, you can call up three main functions: Voice, Song and Demo. In addition, various

detailed settings can be made, for even greater playability and performance potential.

785 775

745 735

745 735 765GP

785 775

EXIT

FUNCTION

795GP

765GP

795GP

When this is shown here,

you can scroll through the

display vertically.

Selecting Voices

Press the [VOICE] button

to call up the Voice group

list.

Press the [

] or [ ] button

to select a Voice group.

Selecting Songs and

Demos

When this is shown here,

you can scroll through the

display vertically.

Press the [SONG/DEMO]

button to call up the Song

category list.

Detailed Settings (Menu display)

Menu icon

Menu name

Press the [ ] or [ ] button

to select a Song category.

Press the [FUNCTION]

button repeatedly to

select the desired menu.

You can change the time that elapses until the control panel turns off, or you can set it to remain on indefinitely. You can also set the

operation sound to off. For details, refer to “Auto Backlight Off” or “Touch Panel Sound” on page 101.

NOTICE

Do not operate the control panel using a sharp item, your fingernails or other hard objects. This may damage the control panel.

NOTE

You cannot operate the control panel by pressing two or more places at once.

Changing the Control Panel Settings

The panel illustrations for CLP-735/745/765GP

here and all those following are based on the

CLP-745.

Basic Operations

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Voi ce : Instrument sound for playing from the keyboard. In addition to the Piano sounds, a wide variety of other musical

instrument sounds are available.

Song: A piece of music for listening enjoyment or for playing back and practicing along with.

Demo: Voice Demos let you experience the characteristics of the Voices.

Selecting a value from a list

[ ] to select a Voice.

[ ] to return.

[] to select a Voice.

[ ] to return.

This indicates the

current position in

the Voice group.

Press the [ ] or [ ] button

to select a Voice.

Play the keyboard.

Voice display

[ ] to select a Song.

[ ] to return.

[] to select a Song.

[ ] to return.

Press the [ ] or [ ] button

to select a Song.

Use the [ ] or [ ] button to select

the previous or next bars.

Song display

[] to detailed settings.

[EXIT] to return to the

previous display.

[ ] to detailed settings.

[ ] to return.

Adjusting the value on the

slider pop-up window

Press the [ ] or [ ] button to adjust the

value, press the [EXIT] button to close

the pop-up window.

Press the [ ] or [ ] button

to select a parameter.

A checkmark is

shown at the right of

the selection.

Note that the hierarchy depth differs

depending on the selected parameter.

Press the [EXIT] button to return to the Voice

display or the Song display, depending on

which display was previously shown.

While the pop-up window is shown, pressing

the [EXIT] button returns to the previously

shown display.

Return to the Voice/Song display

Press the [ ] or [ ] button to select

the previous or next Voice.

When “Lesson” is selected,

press the [

] or [ ] button

to select a Lesson type.

Press the [PLAY/PAUSE] button to

playback the Song.

Use the [

][ ] buttons or the [ ] button

to select a setting.

Press the [ ] button to return to the previous

display.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Main Operations

Enjoying the Piano Performance

This instrument puts the sounds of two renowned grand pianos, the Yamaha CFX and Bösendorfer

Imperial, as well as other piano sounds—each with its own distinctive appeal and sonic characteristics.

Simply select the particular piano sound desired, according to the music you intend to play or your

personal preferences.

1. Press the [CFX GRAND] button or the [BÖSENDORFER]

button to select the piano type.

A Voice is called up from the selected Voice button and its name appears

on the Voice display.

CFX Grand

Yamaha’s CFX concert grand piano sound with a wide dynamic range for

maximum expressive control. Suitable for playing in any music genre and

style.

Bösendorfer

The famed sound of the Vienna-made Bösendorfer Imperial concert

grand piano. Its spacious sound evokes the size of the instrument, and is

ideal for expressing tenderness in compositions.

2. Play the Keyboard.

Selecting two Grand Piano Voices from the panel directly

785 775 745 735795GP 765GP

Voice display

Voice name

NOTE

You can hear and experience

the characteristics of the

Voices by listening to the Demo

Songs for each Voice

(page 32).

Selecting Other Piano Voices

Press the [ ][ ] buttons to select other piano Voices than “CFX Grand” and

“Bösendorfer.” You can also select the other Voices by pressing the [VOICE]

button (page 30).

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Enjoying the Piano Performance

You can adjust the detailed settings of Voices in the Piano group in the Piano

Room. Try creating a custom piano sound by adjusting the various parameters

such as lid position, string resonance, damper resonance and so on.

1. Press the [PIANO ROOM] button to call up the Piano

Room display.

2. Press the [ ]/[ ] buttons to select items (page 28).

3. Press the [ ]/[ ] buttons to change the settings (page 28).

4. Press the [EXIT] button to exit from the Piano Room

display.

Customizing the Sound and the Touch Response of

Piano Voices (Piano Room)

NOTE

Voices in the Piano group are

those contained in the “Piano”

group in the Preset Voice List

on page 106.

785 775 745 735795GP 765GP

EXIT

NOTE

If a Voice other than one in the

Piano group is selected,

pressing the [PIANO ROOM]

button changes it to “CFX

Grand.”

NOTE

Pressing the [PIANO ROOM]

button disables the Dual/Split/

Duo functions.

Piano Room display

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Enjoying the Piano Performance

Parameters you can set in the Piano Room

Item Icon Description

Default

setting

Setting Range

Lid Position Recreates the differences in sound depending on how high

the (virtual) grand piano lid is opened.

Full Full, Half,

Closed

Brightness Adjusts the brilliance of sound. Differs

depending on

the Voice.

0 – 10

Touch Determines how the sound responds to your playing

strength. You should adjust this setting according to the

specific Voice you’re playing or the particular Song you’re

performing, as desired.

Medium Soft2, Soft1,

Medium, Hard1,

Hard2, Fixed

Reverb Determines the Reverb type which is applied to all the entire

sound including the keyboard performance, Song playback

and MIDI data input from an external MIDI device.

Differs

depending on

the Voice.

Refer to the

Reverb Type

List (page 90)

Reverb

Depth

Adjusts the Reverb depth. When “Reverb” is set to “off” or a

value of “0,” no effect is produced.

Differs

depending on

the Voice.

0 – 40

Master Tune Fine tunes the pitch of the entire instrument. This function is

useful when you play this instrument along with other

instruments or CD music.

A3 = 440.0 Hz A3 = 414.8 Hz –

466.8 Hz

(approx. 0.2 Hz

steps)

VRM Turns the VRM effect on/off. For information about the VRM

function, refer to page 29.

Listening to the VRM Demo

Press the [PLAY/PAUSE] button

while this display is open to play

back the VRM Demo Song. You

can hear the Demo Song with and

without the effect (VRM on or off).

The five parameters below can be set when “VRM” is On.

On On, Off

Damper

Resonance

Determines the depth of the string resonance effect which is

applied when the damper pedal is pressed.

50 – 10

Damper

Noise

Turns the Damper Noise produced by the VRM function On/

Off. For details on damper noise, refer to page 29. This

function will be disabled when “Damper Resonance” is set to

“0.”

On On, Off

String

Resonance

Determines the depth of the string resonance effect which is

applied when a note on the keyboard is pressed.

50 – 10

Duplex Scale

Resonance

Adjusts the sympathetic vibrations of the duplex scaling

resonance effect in VRM. For details about duplex scaling,

refer to “What is Duplex Scale?” (page 29).

50 – 10

Body

Resonance

Adjusts the resonance of the piano itself (the soundboard,

the sides, the frame and so on) in VRM.

50 – 10

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Enjoying the Piano Performance

NOTE

• If you wish to keep the Piano Room settings even after turning off the power, set “Voice” and “Other” in the “Backup” setting to “On.” For

details, refer to page 104.

• The items listed above can also be set in the “Voice” menu display (page 87) or the “System” menu display (page 97). When you

change these settings in the Piano Room display, the settings in the menu displays will also be changed. Conversely, changing the

settings in the menu displays will also change the settings in the Piano Room display.

Grand Expression Selects the type of the Grand Expression Modeling effects,

which simulates the physical sound transitions of an actual

piano. When this feature is set to “Dynamic,” you can control

extremely subtle nuances in the performance and sound by

changing your playing strength or touch. When set to

“Static,” the nuances are generally fixed. For details about

Grand Expression Modeling, refer to the below.

NOTE

Grand Expression Modeling is effective only for the Voices of

“CFX Grand” and “Bösendorfer.”

Listening to the Demo

Press the [PLAY/PAUSE] button

while this display is open to play

back the Demo Song of this

function. You can listen to the

Demo song with “Dynamic” or

“Static.”

Dynamic Dynamic, Static

Half Pedal Point Specify the point to which you must depress the right pedal

before the effect of “Sustain Continuously” begins to be

applied. This setting applies only to the “Sustain

Continuously” effect (page 91) that is assigned to the right

pedal.

0 -2 (effective with

the shallowest

press) – 0 – +4

(effective with

the deepest

press)

What is VRM?

The VRM (Virtual Resonance Modeling) function uses sophisticated physical modeling to simulate the actual string resonance sound

that occurs when the damper pedal on a real piano is pressed or keys are played and held.

On an actual acoustic piano, if you press the damper pedal and play a key, not only does the string of the pressed key vibrate, it also

causes other strings and the soundboard to vibrate, each influencing the rest and creating a rich and brilliant resonance that sustains

and spreads. The VRM (Virtual Resonance Modeling) technology featured in this instrument reproduces the complicated interaction

of both string and soundboard resonance faithfully using a virtual musical instrument (physical modeling), and makes the sound more

like a real acoustic piano. Since instantaneous resonance is made at the moment according to the state of the keyboard or pedal, you

can vary the sound expressively by changing the timing of your pressing the keys, and the timing and depth of your pressing the

pedal.

What is Duplex Scale?

Duplex scaling is a stringing method for pianos that uses extra, un-struck strings in the upper octaves to enhance the tone. These

strings sympathetically vibrate with other strings in an acoustic piano, resonating with overtones, and adding richness, brilliance and

complex color to the sound. Since they do not have a damper, they will continue sounding even after you release your hands from the

keyboard.

What is Damper Noise?

Damper noise is the sound made on an acoustic piano when the damper pedal is pressed. The damper noise changes in tone and

volume depending on how quickly the damper pedal is pressed down. Pressing the damper pedal slowly will make a quieter sound

when the damper heads are released from the strings. Pressing the damper pedal with force will transmit the vibrations to the strings,

which adds a lower and louder sound.

Item Icon Description

Default

setting

Setting Range

What is Grand Expression Modeling?

On an actual acoustic piano, subtle changes in the sound can be produced by changing your playing touch from when you press a

key to when you release it. For example, when you press a key all the way to its bottom, the key hits the keybed underneath and the

noise reaches the strings, changing the sound slightly. Furthermore, the tone when the damper is lowered onto strings to mute the

sound is changed by how quickly you release the key. The Grand Expression Modeling technology recreates these subtle changes in

the sound that respond to your touch. This allows you to add accents by playing strongly or add resonance by playing softly to

produce superbly expressive sound. A crisp tone can be heard when playing staccato as well as a lingering sound produced when

releasing the keys slowly.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Various Musical Instrument Sounds

(Voices)

In addition to the wonderfully realistic piano sounds, you can select and play other musical instrument

sounds (Voices), such as organ or stringed instruments. You can also select authentic Voices of fortepianos,

which were made in 18th and 19th centuries.

The Voices of the instrument are conveniently divided into groups of

instrument types. Select a desired Voice and play the keyboard.

You can also select a Voice from the XG Voices (CLP-785 and CLP-795GP

only). For instructions, refer to page 31.

1. Press the [VOICE] button to call up the Voice group list.

Voice groups are listed in the display. The currently selected Voice group

is highlighted.

2. Use the [ ]/[ ] buttons to select the Voice group.

Highlight the Voice group name you want to use.

Selecting Voices

NOTE

To hear and experience the

characteristics of the Voices,

listen to the Demo Songs for

each Voice (page 32).

NOTE

Touch Response will not be

applied to some Voices. For

information about the Voices to

which Touch Response can be

applied, refer to the “Preset

Voice List” on page 106.

XG is a major enhancement of

the GM System level 1 format

(page 43), and was developed

by Yamaha specially to

provide more Voices and

variations, as well as greater

expressive control over Voices

and effects, and to ensure

compatibility of data well into

the future.

NOTE

For information about the

Voices, refer to the “Preset

Voice List” (page 106).

785 775 745 735795GP 765GP

Voice group

Voice group list

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Various Musical Instrument Sounds (Voices)

3. Press the [ ] button.

The Voices in the selected group are listed in the display.

4. Use the [ ]/[ ] buttons to scroll through the Voice list,

and then press the [ ] button to select the desired Voice.

The currently selected Voice name is shown in the display.

You can select other Voices in order using the [ ]/[ ] buttons via the

Voice display.

Press the [

] button to go back to the Voice list.

5. Play the keyboard.

NOTE

Press the [<] button to return to

the Voice List for selecting the

Voice Group.

Voice

Voice display

NOTE

You can specify the Touch

Response (how the sound

responds to the way you play

the keys). You should adjust

this setting according to the

specific Voice you’re playing or

the particular Song you’re

performing, as desired. For

details on the settings, refer to

“Touch” on page 97. You can

also adjust the Touch

Response for the Voices in the

Piano group from the Piano

Room display (page 28).

Selecting XG Voices

If you want to select a Voice from the XG voices, select “XG” in step 2.

Because the XG Voice group has an extremely large number of Voices, the group

is divided into sub-groups. Press the [

] button to call up the Voice group list,

then select the desired Voice group from the list by using the [

]/[ ] buttons.

After this, follow the procedure beginning with step 3 above.

*For details on XG Voices, refer to the “Data List” on the website (page 8).

785 775 745 735 795GP 765GP

Scroll to the bottom of the display

by pressing the [

] button.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Various Musical Instrument Sounds (Voices)

Several Demo recordings have been specially prepared to showcase the

exceptional characteristics of the corresponding Voices. For information about

the Voices that can be heard with these Demos, refer to the “Voice Demo Song

List” on page 108.

1. Press the [SONG/DEMO] button to call up the Song list

display.

2. Use the [ ]/[ ] buttons to select “Demo,” and then press

the [ ] button to call up the next display.

3. Use the [ ]/[ ] buttons to select the desired Voice Demo,

and then press the [ ] button to call up the Demo display.

The currently selected Voice Demo name is shown in the display.

4. Press the [PLAY/PAUSE] button to start playback.

5. Press the [PLAY/PAUSE] button again to stop playback.

The Voice Demo stops automatically when Voice Demo playback reaches

the end.

Selecting Other Demos

Press the [ ] button to return to the Song list display, then repeat steps 3

– 4 of this section.

Listening to the Voice Demos

785 775 745 735795GP 765GP

Demo display

NOTE

Recording operations cannot

be used during Voice Demo

playback.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Various Musical Instrument Sounds (Voices)

Applying the following effects gives you greater and richer expressive

capabilities.

Brilliance

For adjusting the brightness of the sound or creating your own custom EQ

settings. This setting is applied commonly to all parts (keyboard Voices/Song/

MIDI).

1. Press the [FUNCTION] button repeatedly to call up the

“System” menu display, then select the highlighted item in

each display as illustrated below.

Use the [ ]/[ ] buttons to select the desired tonality in the Brilliance

display. To reset the default setting, hold down the [FUNCTION] button

on the CLP-785/775/795GP, or press the [

]/[ ] buttons simultaneously

on the CLP-745/735/765GP.

Enhancing and Customizing the Sound

785 775 745 735795GP 765GP

FUNCTION

EXIT

“System” menu display

1-1. Use the [ ]/[ ] buttons

to select “Sound.”

1-2. Press the [>] button to

call up the next display.

1-3. Use the [ ]/[ ] buttons

to select “Brilliance.”

1-4. Press the [>] button to

call up the next display.

1-5. Use the [ ]/[ ] buttons

to select the value.

Checkmark

Sound display Brilliance display

Default setting: Normal

NOTE

If you select Bright 1 – 3 for the

Brilliance setting, the volume

level will increase slightly. In

this condition, if you raise the

[MASTER VOLUME] slider

setting, the sound may

become distorted. If this

happens, lower the volume

accordingly.

Mellow 1 – 3

Soft and mellow tone. The sound becomes more mellow and warmer as

the number increases.

Normal

Standard tone.

Bright 1 – 3

Bright tone. The sound becomes brighter as the number increases.

User

Opens the “User” display, where you can create your own custom EQ

settings. The EQ (Equalizer) processes the sound by dividing the

frequency spectrum into multiple bands, allowing you to boost or cut

them as required to tailor the overall frequency response and provide

optimum sound when listening through the instrument’s internal speaker

or headphones, etc. Refer to page 34 for details on operation.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Various Musical Instrument Sounds (Voices)

Setting the User EQ

1. Select “User” in the “Brilliance” display (the step 1-5 on

page 33), and then press the [>] button.

A display in which you can set the gain for three frequency bands

appears.

2. Use the [<]/[>] buttons to select a band, then use [ ]/[ ]

buttons to boost or cut it.

To reset the gain for each frequency band to the default value, hold down

the [FUNCTION] button on the CLP-785/775/795GP, or press the [

[

] buttons simultaneously on the CLP-745/735/765GP.

3. Press the [EXIT] button to close the “User” display.

Reverb

This control adds reverberation to the sound by simulating the natural

reverberation of a concert hall. The ideal Reverb type is automatically selected

whenever you select a Voice, but you can select any of the available Reverb types.

To select a desired Reverb type, use the “Voice” menu display: “Reverb”

(page 87). You can also select the Reverb type for Voices in the Piano group

from the Piano Room display (page 28).

This setting is applied commonly to all parts (keyboard Voices/Song/MIDI).

Chorus

This control adds warmth and spaciousness to the sound. The ideal Chorus

type is automatically selected whenever you select a Voice, but you can select

any of the available Chorus types.

To select a desired Chorus type, use the “Voice” menu display: “Chorus”

(page 87).

This setting is applied commonly to all parts (keyboard Voices/Song/MIDI).

Effects

This instrument features a wide variety of Effects, letting you apply

enhancements such as Echo or Tremolo to the selected Voice for your keyboard

performance. You can select any of the available Effect types from the “Voice”

menu display: “Voice Edit”  “Effect” (page 88).

Default setting: 0 dB

Setting range: -6 dB – 0 –

+6 dB

NOTE

You can adjust the Reverb

depth for the selected Voice

from the “Voice” menu display:

“Voice Edit”  “Reverb Depth”

(page 88).

NOTE

You can adjust the Chorus

depth for the selected Voice

from the “Voice” menu display:

“Voice Edit”  “Chorus Depth”

(page 88).

NOTE

When you want to apply the

Chorus effect to a Voice whose

Chorus type is set to off by

default, set the Chorus type to

something other than “Off,”

then set the Chorus depth

value as desired (greater than

“0”).

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Various Musical Instrument Sounds (Voices)

Two Voices can be played simultaneously. You can create warm and richly

textured Voices by using Voices from different groups simultaneously in a layer,

or by using Voices in the same group.

1. Press the [DUAL/SPLIT] button once to enter the Dual

mode.

(CLP-785/775/795GP) The color of the [DUAL/SPLIT] button changes to

orange.

(CLP-745/735/765GP) The [DUAL/SPLIT] button lamp lights up.

The Voice which is displayed at top is Voice 1, and the one at bottom is

Voice 2.

2. Select the Voices for layering.

2-1. Use the [ ]/[ ] buttons to highlight (Voice 1) in the

display.

2-2. Use the [ ]/[ ] buttons or the [VOICE] button to select the

desired Voice.

If you use the [VOICE] button to call up the Voice group list, press the

[

] button to select a Voice, and then return to the previous display.

Use the [

]/[ ] buttons to highlight (Voice 2), and then select a

Voice in the same way.

3. Play the keyboard.

4. Press the [DUAL/SPLIT] button to exit from the Dual

mode.

(CLP-785/775/795GP) The color of the [DUAL/SPLIT] button returns to

white.

(CLP-745/735/765GP) The [DUAL/SPLIT] button lamp goes out.

Playing Two Voices Simultaneously (Dual)

785 775 745 735795GP 765GP

Voice 1

Voice 2

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Various Musical Instrument Sounds (Voices)

Split mode enables you to play two different Voices on the keyboard—one with

your left hand and another with your right.

1. Press the [DUAL/SPLIT] button twice to enter the Split

mode.

(CLP-785/775/795GP) The color of the [DUAL/SPLIT] button changes to

orange.

(CLP-745/735/765GP) The [DUAL/SPLIT] button lamp lights up.

The Voice which is displayed at top is Voice R, and the one at bottom is

Voice L.

2. Select a Voice for the right-hand area and left-hand area.

2-1. Use the [ ]/[ ] buttons to highlight (Voice R) in the

display.

2-2. Use the [ ]/[ ] buttons or the [VOICE] button to select the

desired Voice.

If you use the [VOICE] button to call up the Voice group list, press the

[

] button to select a Voice, and then return to the previous display.

Use the [

]/[ ] buttons to highlight (Voice L), and select a Voice in

the same way.

3. Play the keyboard.

Changing the Split Point

You can change the Split Point (the border between the right- and left-

hand ranges) from the default setting “F#2” to any other key. While in the

Split mode, hold down the [DUAL/SPLIT] button, and press the key you

wish to assign as the Split Point.

Splitting the Keyboard Range and Playing Two

Different Voices (Split Mode)

785 775 745 735795GP 765GP

Voice R

Voice L

NOTE

The specified Split Point key is

included in the left-hand range.

NOTE

The Split Point can also be set

via the menu display. For

details, refer to “Split Point” on

page 98.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Various Musical Instrument Sounds (Voices)

4. Press the [DUAL/SPLIT] button to exit from the Split

mode.

(CLP-785/775/795GP) The color of the [DUAL/SPLIT] button returns to

white.

(CLP-745/735/765GP) The lamp of the [DUAL/SPLIT] button turns off.

1. Press the [DUAL/SPLIT] button three times to turn the

Dual and Split modes on.

(CLP-785/775/795GP) The color of the [DUAL/SPLIT] button changes to

orange.

(CLP-745/735/765GP) The [DUAL/SPLIT] button lamp lights up.

The Voice displayed at top is Voice R1, the one in the middle is Voice R2,

and the one at bottom is Voice L.

2. Select the Voices for layering and for the left-hand area.

2-1. Use the [ ]/[ ] buttons to highlight (Voice R1) in the

display.

2-2. Use the [<]/[>] buttons or the [VOICE] button to select the

desired Voice.

If you use the [VOICE] button to call up the Voice group list, press the

[

] button to select a Voice, and then return to the previous display.

Use the [

]/[ ] buttons to highlight (Voice R2) and (Voice L),

and select Voices in the same way.

3. Play the keyboard.

4. Press the [DUAL/SPLIT] button to exit from the Dual and

Split mode.

(CLP-785/775/795GP) The color of the [DUAL/SPLIT] button returns to

white.

(CLP-745/735/765GP) The lamp of the [DUAL/SPLIT] button turns off.

Center “C”

Using Dual and Split Simultaneously

Voice R1

Voice R2

Voice L

NOTE

• The specified Split Point key

is included in the left-hand

range.

• For the information on setting

the Split Point, refer to

page 36.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Various Musical Instrument Sounds (Voices)

This function allows two different players to play the instrument, one on the

left and the other on the right. This is convenient for practicing duets over the

same octave range.

1. Press the [FUNCTION] button repeatedly to call up the

“System” menu display, and then select the highlighted

item in each display as illustrated below.

(CLP-785/775/795GP) The color of the [DUAL/SPLIT] button changes to

orange.

(CLP-745/735/765GP) The [DUAL/SPLIT] button lamp lights up.

The keyboard is divided into two sections, with the E3 key as the Split

Point.

The pedal function changes as follows.

Playing Duo

785 775 745 735795GP 765GP

EXIT

FUNCTION

“System” menu display

1-1. Use the [ ]/[ ] buttons

to select “Keyboard.”

1-2. Press the [>] button to

call up the next display.

1-3. Use the [ ]/[ ] buttons

to select “Duo.”

1-4. Press the [>] button to

select “On.”

Keyboard display

NOTE

• In Duo, VRM is not effective.

• When the Type of Duo

(page 98) is set to

“Separated,” Reverb and

Binaural Sampling/

Stereophonic Optimizer are

not effective.

NOTE

The specified Split Point key is

included in the left-hand range.

Right Pedal Damper pedal for the right-hand range

Center Pedal Damper pedal for both the right-hand and left hand ranges

Left Pedal Damper pedal for the left-hand range

Left section

Split Point E3Equivalent to C3 (middle C) Equivalent to C3 (middle C)

Right section

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Various Musical Instrument Sounds (Voices)

2. Press the [EXIT] button to exit from the menu display.

[Duo] is shown in the Voice display while Duo mode is on.

3. Play the keyboard.

The sound of left-hand range is emitted from the left, the sound of right-

hand range is emitted from the right by default.

4. Press the [DUAL/SPLIT] button to exit from the Duo

mode.

You can also exit from the Duo mode by following either of the

instructions below.

• Press any of the [CFX GRAND], [BÖSENDORFER], [PIANO ROOM]

buttons.

• Repeat the same procedure from step 1 to set it to “Off.”

The instrument has a built-in metronome (a device that keeps an accurate

tempo)—a convenient tool for practice.

1. Press the [METRONOME] button to start the metronome.

This calls up the Tempo display, from which you can adjust the tempo.

For details, see next section.

2. Press the [METRONOME] button to stop the metronome.

To close the Tempo display, press the [EXIT] button.

Adjusting the Tempo

NOTE

You can listen to the sounds

played by two players through

both speakers as well, with a

natural balance of sound.

Press the [FUNCTION] button

repeatedly to call up the

“System” menu display, then

change the settings in

“Keyboard”  “Type”

(page 98).

Using the Metronome

NOTE

You can set the metronome

volume, BPM and so on from

the “Metronome/Rhythm” menu

display (page 95).

785 775 745 735795GP 765GP

EXIT

FUNCTION

Metronome

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Various Musical Instrument Sounds (Voices)

1. Press the [TEMPO] button to call up the Tempo display.

2. Use the [<]/[>] buttons to adjust the tempo.

You can adjust the tempo value (number of beats per minute) using the

[<]/[>] buttons.

To reset tempo to the default setting

CLP-785/775/795GP: Hold down the [FUNCTION] button.

CLP-745/735/765GP: Press the [<] and [>] buttons simultaneously.

3. Press the [EXIT] button to close the Tempo display.

Setting the metronome time signature

1. Press the [FUNCTION] button repeatedly to call up the

“Metronome/Rhythm” menu display.

2. Use the [ ]/[ ] buttons to select “Time Sig.” and then

press the [ ] button.

NOTE

For information on setting the

time signature, refer to

page 40.

Tempo value

785 775 745 735

EXIT

FUNCTION

795GP 765GP

Time Signature

Time Signature display

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Various Musical Instrument Sounds (Voices)

3. Use the [ ]/[ ] buttons to select the desired time

signature.

Setting range: 2/2, 1/4, 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 3/8, 6/8, 7/8, 9/8, 12/8

Default setting: 4/4 (Selecting a MIDI Song will change the tempo value to

that specified in the selected MIDI Song data.)

Tempo indication and Setting range

Tempo is displayed as “note type=xxx” (For example: =120). Selecting

the Time Signature changes the available parameters as follows.

* When the tempo value of the selected MIDI Song is outside the setting range on the instrument,

the value will be changed to fit within the setting range.

* Note type will be fixed to quarter note as long as the “BPM” parameter in the “Metronome/Rhythm”

menu display is set to “Crotchet” regardless of the Time Signature you set.

4. Turn the “Bell” setting on.

For details, refer to “Bell” in the “Metronome/Rhythm” menu (page 95).

The Metronome plays back according to the selected Time Signature with

the Bell sound on the first beat of each measure.

5. Press the [EXIT] button to close the “Metronome/

Rhythm” menu display.

Note type Time Signature Setting range

2/2 3 – 250

1/4, 2/4, 3/4, 4/4, 5/4,6/4, 7/4 5 – 500

6/8, 9/8, 12/8 4 – 332 (even numbers only)

3/8, 7/8 10 – 998 (even numbers only)

and 999

Half note

Quarter note

Dotted quarter note

Eighth note

Note type

The length of one beat

Metronome detailed

settings

You can set the metronome

volume, BPM and so on from

the “Metronome/Rhythm” menu

display (page 95).

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing the Keyboard along with Rhythm

Playback

This instrument features various rhythm patterns, allowing you to play and perform along with dynamic

Rhythm playback. The preset Rhythms consist of drums and bass accompaniment.

1. Press the [RHYTHM] button to start Rhythm playback.

Intro playback starts followed by the Rhythm playback.

2. Use the [<]/[>] buttons to call up the desired Rhythm.

For details on the available Rhythms, refer to the Rhythm List (page 110).

3. Play the keyboard along with Rhythm playback.

The instrument will automatically create appropriate accompaniment

bass sound while you play, based on the chords you play.

The default setting of the bass sound is “On.”

If you don’t want to have the bass accompaniment sound, set it to “Off.”

Press the [FUNCTION] button repeatedly to call up the “Metronome/

Rhythm” menu display, and make the settings in “Bass.”

4. To stop Rhythm playback, press the [RHYTHM] button

again.

The Rhythm will automatically stop after an Ending is played.

5. Press the [EXIT] button to exit from the Rhythm display.

785 775 745 735795GP 765GP

EXIT

FUNCTION

About the Rhythm Tempo

• The Rhythm tempo is

equivalent to that set for the

Metronome (page 39).

• Even if you set the Rhythm

tempo, selecting a MIDI Song

will change the tempo value

to that specified in the

selected MIDI Song data.

Detailed Settings for the

Rhythm

From the “Metronome/Rhythm”

menu display (page 95), you

can set detailed parameters,

such as Rhythm volume and

Sync Start, letting you start

Rhythm playback by simply

pressing a key.

NOTE

The Rhythm display cannot be

called up during Song

playback or recording.

To set the Intro/Ending on

or off

“Intro” and “Ending” allow you

to vary the arrangement of the

accompaniment. You can set

“Intro” and “Ending” on/off via

“Intro” or “Ending” in the

“Metronome/Rhythm” menu

display (page 95).

NOTE

• Some arrangements may not

be suitable for use with this

feature.

• 9th, 11th and 13th chords

cannot be recognized.

• For details on how to play

chords, refer to commercially

available chord books.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Back Songs

This instrument can play Preset Songs, Songs you recorded on this instrument, or commercially available

Songs. In addition to listening to these Songs, you can play the keyboard as the Song plays back.

You can play back the following types of Songs in this instrument.

• Preset Voice Demo Songs (Voice Demo).

•P

reset Songs: 50 classical Preset Songs (“50 Classical”) and 303 Lesson Songs

(“Lesson”)

• Your own recorded Songs (see page 54 for instructions on recording)

• Commercially available MIDI Song data: SMF (Standard MIDI File)

The maximum size for playback on this instrument is approx. 500KB per single

MIDI Song.

• Commercially available Audio Song data: Wav (file extension = .wav with

44.1 kHz sample rate, 16-bit resolution, stereo, and maximum 80 minutes length)

MIDI Songs and Audio Songs

There are two kinds of Songs that can be recorded and played back on this

instrument: MIDI Songs and Audio Songs.

A MIDI Song is comprised of your keyboard performance information and is not a

recording of the actual sound itself. The performance information refers to which

keys are played, at what timing, and at what strength—just as in a musical score.

Based on the recorded performance information, the tone generator (of the

Clavinova, etc.) outputs the corresponding sound. A MIDI Song uses a small amount

of data capacity in comparison to an Audio song, and allows you to easily change

aspects of the sound, such as Voices used, etc.

An Audio Song is a recording of the performed sound itself. This data is recorded in

the same way as that used with voice recorders, etc. This data can be played with a

portable music player, etc., allowing you to easily let other people hear your

performance.

Availability of functions differs between MIDI Songs and Audio Songs. In this chapter, the

following icons indicate whether or not the explanation applies to MIDI Songs or Audio Songs

individually.

Example:

The CLP-785 and CLP-795GP are compatible with the following formats.

GM System Level 2

“GM (General MIDI)” is one of the most common Voice allocation formats. “GM System Level

2” is a standard specification that enhances the original “GM” and improves Song data

compatibility. It provides for increased polyphony, greater Voice selection, expanded Voice

parameters, and integrated effect processing.

XG is a major enhancement of the GM System Level 1 format, and was developed by Yamaha

specifically to provide more Voices and variations, as well as greater expressive control over

Voices and effects, and to ensure compatibility of data well into the future.

GS was developed by the Roland Corporation. In the same way as Yamaha XG, GS is a major

enhancement of the GM specifically to provide more Voices and Drum kits and their

variations, as well as greater expressive control over Voices and effects.

MIDI Audio

Indicates explanation applies

only to MIDI Songs

785 775 745 735 795GP 765GP

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Back Songs

1. If you want to play back a Song in a USB flash drive,

connect the USB flash drive containing Song data to the

USB [TO DEVICE] terminal beforehand.

Audio files to be played must be on a USB flash drive.

2. Press the [SONG/DEMO] button to call up the Song List

display, then select the desired category using [ ]/[ ]

buttons.

Select the desired one from “50 Classical,” “Lesson,” “User” or “USB”

referring to the category descriptions below.

Song Playback

MIDI Audio

NOTE

The instrument can

automatically select a Song file

saved in the root directory of

the USB flash drive as soon as

the USB flash drive is

connected. For instructions,

refer to “USB Autoload” on

page 100.

785 775 745 735795GP 765GP

NOTE

Before using a USB flash drive,

be sure to read “Connecting

USB Devices (USB [TO

DEVICE] terminal)” on

page 74.

Demo

Voice Demos let you experience the characteristics of the Voices

(MIDI Song). Refer to page 32 for how to play back the Demo. For Song

names, refer to the “Voice Demo Song List” on page 108.

50 Classical

50 classical Preset Songs (MIDI Songs). For these Songs, see the music

book “50 Classical Music Masterpieces,” included with this instrument.

For details, refer to the “Song List” on page 109.

Lesson

303 Preset Songs (MIDI Songs) ideal for practice, taken from “The Virtuoso

Pianist” and others. For these Songs, refer to the Lesson Songs on page 109.

Lesson Songs are divided into several folders depending on the types.

User

MIDI Songs which have been recorded and saved to the instrument by

using the Record function (page 54), and MIDI Songs which have been

copied/moved to the instrument using File operations (page 65).

USB

MIDI/Audio Songs saved to the USB flash drive by recording them with this

instrument or Audio Songs converted from MIDI Songs (page 69), or MIDI/

Audio Songs saved to the USB flash drive.

Song category

[ ] button

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Back Songs

3. Press the [>] button to display the Songs in the specified

category, and then select a desired Song using the [ ]/[ ]

buttons.

When “User” or “USB” category is selected, the icon indicating Song

types are shown to the left of the Song name.

Since the Lesson Songs are conveniently divided into specific folders,

select the desired folder, press the [>] button, and then select a Song.

To select a recorded Song saved to USB flash drive:

When you record a Song and save it to a USB flash drive, the recorded

Song will automatically be saved to the USER FILES folder on a USB flash

drive. If you want to select the Song from the USER FILES folder, select

USB in step 2, and USER FILES folder in step 3.

4. Press the [>] button to select the desired Song.

The Song display lets you to see the currently selected Song name and its

category name.

5. Press the [PLAY/PAUSE] button to start playback.

The current position of the Song playback will be shown.

You can play the keyboard along with Song playback. You can also change

the Voice for your keyboard performance. To adjust the volume balance

between your keyboard performance and MIDI Song playback, or to

adjust the Audio Volume, set the appropriate Volume parameters

individually in the “Song” menu display (page 52).

NOTE

Press the [<] button to return to

the category/folder.

Icon

Song List

Icon Data format

Folder

MIDI Songs

Audio Songs

NOTE

“NoSong” will be shown in the

display when no data exists in

that folder.

When Songs cannot be

read from a USB flash drive

If the song cannot be read, you

may need to change the

Language setting for the Song

name in the “System” menu

display (page 101).

NOTE

Press the [ ] button to return to

the Song list.

NOTE

When the Song title is too long

to be displayed, press the [

]

button to see the full title.

Song

name

Song display: MIDI Song Song display: Audio Song

Song

name

Category name Category name

Song display: MIDI Song Song display: Audio Song

Current position Current position

NOTE

If a Song has been selected,

the original tempo of the Song

is used, and the Metronome

setting (page 39) will be

ignored.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Back Songs

6. Press the [PLAY/PAUSE] button again to stop playback.

Even if you don’t press the [PLAY/PAUSE] button, the Song stops

automatically when Song playback reaches the end.

Rewind/Fast forward/Returning to the top of the Song

1. Use the [<] and [>] buttons to move back or forth through

the Song (in bars or seconds), while the Song display is

shown.

Holding the corresponding button scrolls backward/forward

continuously.

Returning to the top of the Song

(CLP-785/775/795GP) Hold down the [FUNCTION] button.

(CLP-745/735/765GP) Press the [<] and [>] buttons simultaneously.

NOTE

Useful playback functions are

described on pages 48 – 53.

Song display: MIDI Song Song display: Audio Song

Measure number Elapsed time

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Back Songs

Adjusting the tempo

You can adjust the playback tempo of a Song.

1. Press the [TEMPO] button to call up the Tempo display.

For a MIDI Song, press the [TEMPO] button during Song playback or

while the Song display is shown. For an Audio Song, press the [TEMPO]

button during Song playback.

2. Change the Tempo value using the [<]/[>] buttons.

To recall the original tempo (the tempo particular to the Song), hold

down the [FUNCTION] button on the CLP-785/775/795GP, or press the

[<] and [>] buttons simultaneously on the CLP-745/735/765GP.

When a MIDI Song is selected, the tempo range differs depending on the

Time Signature for a selected Song. Available setting values may only

include even numbers (multiples of 2), depending on the Time Signature.

For more information, refer to page 41.

When an Audio Song is selected, the tempo range is between 75% –

125%. 100% is the original tempo value. Higher values result in a faster

tempo.

3. Press the [EXIT] button to exit from the Tempo display.

NOTE

Changing the tempo of an

Audio Song may change its

tonal characteristics.

785 775 745 735795GP 765GP

EXIT

FUNCTION

MIDI Song Audio Song

Tempo Tempo

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Back Songs

Some MIDI Songs, such as Preset Songs, are divided into right-hand and left-

hand parts. By using such Song data, you can practice the left hand by turning

on only the right-hand part, and practice the right hand by turning on only the

left-hand part—allowing you to practice parts separately for easy mastery of

difficult material.

1. Select a Song for practicing.

For instructions, refer to page 44. Song categories “50 Classical” and

“Lesson” are recommended for this.

2. Select a part you want to practice, then set the part to off.

Press the [FUNCTION] button repeatedly to call up the “Song” menu

display, then select the highlighted item in each display as illustrated

below.

In the “L/R” display, select the part (track) you want to mute for

practicing. Select “R” for practicing the right-hand part, or “L” for the left-

hand part.

3. Use the [>] button to select “Off” for the selected part.

Playing a One-hand Part — Part Cancel

Function (MIDI Songs)

MIDI Audio

785 775 745 735795GP 765GP

FUNCTION

NOTE

The parts can be turned on or

off even during playback.

NOTE

Usually, Channel 1 is assigned

to “R,” Channel 2 is assigned

to “L,” and Channels 3 – 16 are

assigned to “Extra.” However,

the assignments may differ

depending on the particular

Song. Channels assigned to

“Extra” cannot be set to on or

off individually.

NOTE

Some songs in “50 Classical”

and “Lesson” categories are

duet songs. Refer to page 109

about part assignment for the

duet songs.

NOTE

Whenever you select another

MIDI Song, both parts are

automatically turned on.

“Song” menu display

2-1. Use the [ ]/[ ] buttons

to select “L/R.”

2-2. Press the [>] button to

call up the next display.

2-3. Use the [ ]/[ ] buttons

to select desired track.

L/R display

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Back Songs

4. Press the [PLAY/PAUSE] button to start playback.

Play and practice the part you just muted.

5. Press the [PLAY/PAUSE] button again to stop playback.

Even if you don’t press the [PLAY/PAUSE] button, the Song stops

automatically when Song playback reaches the end.

There are three Repeat items as follows. These are convenient for repeatedly

practicing difficult phrases. It is a good idea to use this function and the Part

Cancel function (above) for practicing difficult phrases, in the case of MIDI

Songs.

•

AB Repeat ............. Play a MIDI Song repeatedly by designating a specific

range within the Song.

•

Phrase Repeat...... Play a MIDI Song repeatedly by designating a phrase or

phrases within the Song.

•

Song Repeat.......... Play a MIDI/Audio Song repeatedly, or play all MIDI/

Audio Songs saved in a designated folder repeatedly in

order or in random order.

The explanations here apply only to AB Repeat and Song Repeat. For Phrase

Repeat, refer to page 92.

1. Select a Song to be played back.

For instructions, refer to page 44.

2. Call up the Repeat display.

Press the [FUNCTION] button repeatedly to call up the “Song” menu

display. Select “Repeat,” then press the [>] button.

Playing Back a Song Repeatedly

795GP 765GP785 775 745 735

FUNCTION

“Song” menu display Repeat display

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Back Songs

3. In the Repeat display, select a desired item using the [ ]/

[ ] buttons, then press the [>] button.

If you want to set AB Repeat, select “A – B.”

If you want to set Song Repeat, select “Song.”

4. Set in the appropriate setting display.

•AB Repeat .................See below.

•Song Repeat...............See page 51.

AB Repeat setting

Specify the repeat range.

4-1. Press the [PLAY/PAUSE] button to start Song playback.

4-2. Press the [>] button at the starting point (A) of the range

to be repeated.

4-3. Press the [>] button again at the ending point (B).

After an automatic lead-in (to help guide you into the phrase), the

range from Point A to Point B is played back repeatedly.

To turn off the Repeat function, press the [>] button

while “Repeat Off” is highlighted, or select another Song

MIDI Audio

A – B display

Specifying the top of a

Song as Point A

Specify Point A before starting

playback, then start playback

and specify Point B.

Specifying the end of a

Song as Point B

Specifying only Point A results

in repeat playback between

Point A and the Song end (as

Point B).

NOTE

You can also specify the repeat

range by the following

procedure.

1 Highlight the measure

number using the [

] button,

then fast-forward the Song to

Point A using the [<]/[>]

buttons.

2 Highlight “Set A” using the

[

] button, then press the [>]

button.

After specifying Point A, the

display for specifying Point

B is called up.

3 Specify Point B in the same

way as Point A.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Back Songs

Song Repeat setting

4-1. Select the desired Repeat type using the [ ]/[ ] buttons

in the setting display.

4-2. Press the [PLAY/PAUSE] button to start Repeat

playback.

Icons corresponding to each Repeat setting are shown on the Song

display.

While the Repeat setting is on, (Single), (All), or

(Random) is shown in the upper right corner of the Song display.

5. To turn off the Repeat function, press the [PLAY/PAUSE]

button again to stop playback, and then select “Off” in

step 4-1.

Off

Disables repeated playback.

Single

Plays through the selected file repeatedly.

All

Continuously plays back all Songs within a designated range in order.

Random

Continuously plays back all Songs within a designated range in random

order.

MIDI Audio

Setting display

Checkmark

Icon

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Back Songs

When a MIDI Song is selected, you can adjust the Volume balance between the

Song playback and the sound you are playing on the keyboard, or between the

Right and Left parts of the selected Song. When an Audio Song is selected, you

can adjust the Audio Song volume.

Select the desired Song beforehand. For instructions, refer to page 44.

1. Press the [FUNCTION] button repeatedly to call up the

“Song” menu display. Select “Volume,” and then press the

[>] button.

2. When a MIDI Song is selected, select “Song – Keyboard”

or “Song L – R” using the [ ]/[ ] buttons, then press the

[>] button to call up the setting display.

When an Audio Song is selected, use the [<]/[>] buttons to

set the Audio playback volume. After setting the value, go

on to step 4.

Adjusting the Volume Balance

MIDI Audio

795GP 765GP785 775 745 735

EXIT

FUNCTION

“Song” menu display (When a MIDI Song is selected)

“Song” menu display (When an Audio Song is selected)

NOTE

Some commercially available

music data contain extremely

high volumes. When using

such data (MIDI Song), adjust

the “Song – Keyboard” setting.

Song – Keyboard

Adjust the Volume balance between the MIDI Song playback and

the sound you are playing on the keyboard.

Song L – R

Adjust the Volume balance between the Right and Left parts of the

selected MIDI Song.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Playing Back Songs

3. Adjust the Volume balance by using the [<]/[>] buttons.

In the case of “Song – Keyboard”:

In the case of “Song L – R”:

4. Press the [EXIT] button twice to exit from the “Song”

menu display.

Whenever you select another MIDI Song, the setting for “Song L – R” is

restored to its default setting. As for “Song – Keyboard” and Audio

Volume, selecting another Song will not reset the value.

Starting/pausing playback by using a pedal

You can assign the Song Play/Pause function (the same function as the [PLAY/

PAUSE] button on the control panel) to the center or the left pedal. Press the

[FUNCTION] button repeatedly to call up the “System” menu display, and then

select “Pedal” → “Play/Pause” to make the assignment. For details, refer to

page 98.

This is convenient for starting or pausing playback when you are performing

and can’t take your hands from the keyboard.

Transposing the pitch of a Song

You can shift the pitch of Song playback up or down in semitone intervals.

Press the [FUNCTION] button repeatedly to call up the “Song” menu display →

“Transpose.” For details, refer to page 92.

The Song playback volume will be lower.The volume of your playing will be lower.

R part volume will be lower. L part volume will be lower.

NOTE

The selected parameters of

“Song – Keyboard” will be

maintained (Backup Setting)

even when the power is turned

off. Make sure not to set the

volume levels to minimum.

Otherwise the sound of

keyboard or songs will not be

played. You can change the

settings to maintain the

selected parameter or not. For

details, refer to “Backup

Setting” on page 104.

Useful Playback Functions

MIDI Audio

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Recording Your Performance

This instrument allows you to record your performance in the following two methods.

• MIDI Recording

With this method, recorded performances are saved to the instrument or a USB flash drive as an SMF

(format 0) MIDI file. If you want to re-record a specific section or edit parameters such as Voice, use this

method. Also you can record your performance to each Track one by one. Since a MIDI Song can be

converted to an Audio Song after recording (page 69), you may want to use MIDI recording (with

overdubbing and multiple parts) to first create a complex arrangement you would not otherwise be able to

play live, then convert it to an Audio Song. This instrument allows you to record approximately 500 KB of

data per Song.

•Audio Recording

With this method, recorded performances are saved to a USB flash drive as an Audio file. Recording is done

without designating the recorded part. Since it is saved in stereo WAV format of normal CD quality

resolution (44.1 kHz/16 bit), it can be transmitted to and played on portable music players by using a

computer. Because the audio sound input* from the external device is also recorded, you can record your

keyboard performance along with the performance sound of the connected audio device, computer, or

smart device, etc. This instrument allows you to record up to 80 minutes per single recording.

*Audio sound input (Audio input sound): Audio data sent to this instrument from the external devices such as a computer or a smart

device, etc., when connecting the instrument with the devices via [AUX IN] jack, [USB TO HOST] terminal, wireless LAN, or

Bluetooth. For connection with these devices, refer to the “Connections” section from page 71.

For details about the difference between MIDI Songs and Audio Songs, refer to page 43.

This chapter covers the following four methods. Note that the created data

format differs depending on the method, MIDI or Audio.

• Quick MIDI Recording .......................................page 55

This method lets you start recording most quickly. Your performance will be

recorded and saved to the “User” category in this instrument’s internal

memory.

• MIDI Recording — Independent Tracks ............ page 57

This lets you record the right, left and extra parts separately. Since you can

record the left part while playing back the right, this is useful for recording both

parts of a duet. Since you can record up to sixteen parts separately, record the

performance of each instrument part one by one and create fully orchestrated

compositions.

• MIDI Recording to the USB Flash Drive ............ page 59

This method is useful when you want to overwrite the already recorded MIDI

Song in the USB flash drive or create a New MIDI Song on the USB flash drive.

• Audio Recording to the USB Flash Drive ...........page 60

This method lets you record your performance as Audio data to the USB flash

drive connected to the USB [TO DEVICE] terminal.

MIDI

Audio

Recording Methods

MIDI

Audio

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Recording Your Performance

This is the quickest way to start recording.

1. Make the necessary settings such as Voice selection and

time signature.

Before starting the Recording operation, select a Voice (page 30) for your

keyboard performance, turn Dual/Split/Duo on or off as desired, set the

tempo and time signature of the Metronome/Rhythm (page 39), then

select a Reverb/Chorus/Effect type as desired.

2. Press the [REC] (Record) button to enter the Recording

mode.

A blank new Song for recording is automatically set.

The [PLAY/PAUSE] button will flash at the current tempo.

To exit from the Recording mode, press the [REC] (Record) button again.

3. Play the keyboard (or press [PLAY/PAUSE]) to start

recording.

When you wish to record an empty section at the start of the Song, press

the [PLAY/PAUSE] button to start recording.

Quick MIDI Recording

MIDI

785 775 745 735795GP 765GP

NOTE

If you want to record the left-

hand and right-hand parts

individually, refer to “MIDI

Recording—independent

Tracks” (page 57), since the

Recording method here

assumes that both the left and

right parts are being recorded

together.

Using the Metronome/

Rhythm

You can use the Metronome/

Rhythm while recording. While

the Metronome sound cannot

be recorded, the Rhythm

sound can. Make sure to enter

the Recording mode before

starting Rhythm playback,

since entering the Recording

mode during playback of the

Rhythm stops its playback.

NOTE

The “Song – Keyboard” Volume

Balance (page 52) will not be

recorded.

NOTE

With MIDI recording, the

performance will be recorded

to Track 1. However, in the

Dual/Split/Duo mode, the

tracks assigned for recording

and the tracks actually used for

recording are different. For

details refer to “Recording

Track Assignment” on page 57.

Mode:

A mode is a status under which

you can execute a certain

function. In Recording mode,

you can record Songs.

NOTE

Pressing and holding the [REC]

button for a second will call up

the display which lists the

Recording Target Songs. In this

case, select “New Song” then

press the [>] button referring to

the table on page 59.

To start recording as soon

as a Rhythm starts:

When a Rhythm (page 42) is

selected, press the [RHYTHM]

button to start Rhythm

playback and MIDI recording

simultaneously.

Measure number

REC display

REC display (during recording)

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Recording Your Performance

4. After you finish your performance, press the [REC]

(Record) button again to stop recording.

This operation exits from the Recording mode and calls up the display for

saving the recorded performance data.

5. If you want to save the recorded performance, press the [>]

button to execute the Save operation while “Save” is

highlighted.

After the Save operation is completed, the display shows “Save

Completed” then returns to the Song display. The recorded Song will be

named “USERSONGxxx” (xxx: number) and saved in the “User”

category.

• If you are not satisfied with your performance and want to record

again, highlight “Retry” then press the [>] button. Try recording again

from step 3.

• If you do not want to save the recorded data, highlight “Cancel” then

press the [>] button.

6. To hear the recorded performance, press the [PLAY/

PAUSE] button.

NOTICE

The recorded MIDI Song will be

lost if you change to another

Song or you turn the power off

without executing the Save

operation.

Renaming the recorded

Song

The recorded Songs are

named automatically, but you

can rename Songs as you like

(page 70).

NOTE

Refer to page 67 for how to

delete a Song.

Data that can be recorded to MIDI Songs

Data for each Track

• Note data (your keyboard performance)

•Voice selection

• Pedal operations (Damper/Soft/Sostenuto)

•Reverb Depth

•Chorus Depth

•Effect Depth

• Sound brightness — “Brightness”

• Resonance effect setting — “HarmonicContent”

•Octave

• Volume setting for each Voice — “Volume”

•Pan for each Voice

•Detune

•Touch Sensitivity

• Grand Expression Modeling data

Data commonly for all

Tracks

•Scale

•Tempo

•Time Signature

• Reverb Type

•Chorus Type

•Effect Type

NOTE

Parameter settings other than

Voice and Tempo, such as note

data, pedal (Damper/Soft/

Sostenuto) data, octave setting

and time signature, cannot be

changed after recording.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Recording Your Performance

With MIDI Recording, you can create a MIDI Song consisting of 16 tracks by

recording your performance to each track one by one. In recording a piano

piece, for example, you can record the right-hand part to Track 1 then record

the left-hand part to Track 2, allowing you create a complete piece which may

be difficult to play live with both hands together. To record a performance with

Rhythm playback, for example, record Rhythm playback, then record melodies

to Track 1 while listening to the already recorded Rhythm playback. In this way,

you can create an entire Song which would otherwise be difficult, or even

impossible, to play live.

1. Execute the same operations as in step 1 and step 2 on

page 55 to enter the Recording mode with a new blank

Song selected.

2. Use the [<]/[>] buttons to select a Recording Track.

When you want to record the right-hand part, highlight “R” (Track 1).

When you want to record the left-hand part, highlight “L” (Track 2).

Alternately, when you want to record your performance to Tracks 3 – 16,

call up the desired one by pressing the [<]/[>] buttons repeatedly. If the

Rhythm playback was recorded first before other tracks, it is

automatically recorded to one of the Tracks 9 – 11 (or all the three tracks).

If this is the case, select the desired track for recording from any except

for these tracks.

3. Play the keyboard to start recording.

When you want to record the Rhythm playback first, press the

[RHYTHM] button to start recording. When you want to record an

empty section at the start of the Song, press the [PLAY/PAUSE] button to

start recording.

MIDI Recording — Independent Tracks

MIDI

NOTE

If you want to record your

performance to the USB flash

drive or you want to add the

recording to the MIDI Song in

the USB flash drive, refer to

“MIDI Recording to the USB

flash drive” (page 59).

NOTE

Rhythm cannot be added to a

recorded Song. When you want

to record Rhythm, make sure to

record the Rhythm playback

first.

NOTE

Because bass accompaniment

of the Rhythm sounds only

when playing the keyboard, in

order to record the bass

accompaniment, it is

necessary to record keyboard

performance with it as well.

When you want to record a new track of an already recorded

MIDI Song:

After selecting the target MIDI Song (steps 1 – 4 on pages 44 – 45), press and hold

the [REC] (Record) button for a second to call up the display which lists the

Recording Target Songs, select the 4th item (the selected MIDI Song), press the [>]

button, then go to step 2 described on this page.

12345678910111213141516

Example:

Right-hand part

Left-hand part Rhythm

NOTE

If you record your performance

with both hands to R then to L,

both are played back at the

same time as a single Song.

Recording Track

Assignment

• When recording the Rhythm,

you cannot freely select

desired tracks. The Rhythm is

recorded to Tracks 9 – 11.

• When Dual/Split/Duo is on,

only the R1 Voice

performance will be recorded

to the selected Track, and the

R2 Voice performance will be

recorded to the Track number

which is 6 plus the selected

Track, and the L Voice

performance of Split/Duo will

be recorded to the Track

number which is 3 plus the

selected Track.

NOTICE

Note that recording your

performance to a Track

containing data will overwrite

the previously recorded data.

Recording Track

Track Data Status

Contains data.

Contains no data.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Recording Your Performance

4. After you finish your performance, press the [REC]

(Record) button to stop recording.

This operation exits from the Recording mode and calls up the display for

saving the recorded performance data.

5. If you want to save the recorded performance, press the [>]

button to execute the Save operation while “Save” is

highlighted.

After the Save operation is completed, the display shows “Save

Completed” then returns to the Song display. The recorded Song will be

named “USERSONGxxx” (xxx: number) and saved in the “User”

category.

• If you are not satisfied with your performance and want to record

again, highlight the cursor to “Retry” then press the [>] button. Try

recording again from step 3.

• If you do not want to save the recorded data, highlight “Cancel” then

press the [>] button.

6. To hear the recorded performance, press the [PLAY/

PAUSE] button.

7. To record another Track, enter the Song Recording mode

again.

7-1. Press and hold the [REC] (Record) button for a second.

The Recording Target Songs will be listed on the display.

7-2. Use the [ ] button to select existing MIDI Song (at the

bottom of the list), then press the [>] button.

You can check whether or not each Track contains recorded data by the

indication that appears at the upper right of each Track. For details on the

indication, refer to “Track Data Status” on page 57.

8. Record your performance to another track by repeating

steps 2 – 6 of this section.

In step 2, select a track which has no recorded data. In step 3, play the

keyboard while listening to the already recorded data.

NOTICE

The recorded MIDI Song will be

lost if you change to another

Song or you turn the power off

without executing the save

operation.

Renaming the recorded

Song

The recorded Songs are

named automatically, but you

can rename Songs as desired

(page 70).

NOTE

For instructions on rewinding,

fast-forwarding and returning

to the top of the Song during

Song playback, refer to

page 46.

NOTICE

Note that recording your

performance to a Track

containing data will overwrite

the previously recorded data.

NOTE

Refer to page 67 for how to

delete a Song. Refer to “Track

Delete” on page 93 for how to

delete a track.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Recording Your Performance

These instructions describe how to overwrite an already recorded MIDI Song

in the USB flash drive or how to create a New MIDI Song on the USB flash

drive.

1. Connect the USB flash drive to the USB [TO DEVICE]

terminal.

2. Select a MIDI Song as Recording target, then enter the

Recording mode.

2-1. If you want to record an additional Track to the already

recorded MIDI Song, select the desired MIDI Song in the USB

flash drive. If you want to record from scratch, skip this step.

2-2. Press and hold the [REC] (Record) button for a second to call

up the display which lists the Recording Target Songs.

2-3. From the Recording Target Songs, select “New Song (USB)”

or the MIDI Song selected in step 2-1 (4th item below) using

the [

]/[ ] buttons, then press the [>] button to enter the

Recording mode.

MIDI Recording to the USB Flash Drive

MIDI

NOTE

To connect a USB flash drive,

be sure to read the section

“Connecting USB Devices

(USB [TO DEVICE] terminal)”

on page 74.

NOTE

Before starting the Recording

operation, check the remaining

memory capacity of the USB

flash drive. “System” menu:

“Utility”  “USB Properties”

(page 100).

Recording Target

Song

Description

New Song Select this when you want to record your performance to a

blank MIDI Song and save to “User” category in this

instrument’s internal memory.

New Song (USB)* Select this when you want to record your performance to a

blank MIDI Song and save to the USB flash drive.

New Audio (USB)* Select this when you want to record your performance to

blank audio data and save to the USB flash drive.

785 775 745 735795GP 765GP

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Recording Your Performance

* Can be selected only when the USB flash drive is connected to the USB [TO DEVICE]

terminal.

** Will not be shown when an already recorded MIDI Song is not selected in step 2-1 above,

or when a Preset Song is selected in step 2-1.

3. Execute the Recording operation, then save the recorded

performance.

• When you want to record additionally to the currently

selected MIDI Song, or record to a specified track on a

blank MIDI Song:

Execute steps 2 – 8 in “MIDI Recording—Independent Tracks” on

page 57.

• When you want to quick record to a blank MIDI Song:

Execute steps 3 – 6 in “Quick MIDI Recording” on page 55.

These instructions describe how to record your performance as audio data.

Note that an audio file to which your performance is to be recorded can be

saved only to a USB flash drive. This is why you should prepare your USB flash

drive device before starting the Recording operation.

1. Connect the USB flash drive to the USB [TO DEVICE]

terminal.

2. Press and hold the [REC] (Record) button for a second to

call up the display which lists the Recording Target Songs.

3. Use the [ ]/[ ] buttons to select “New Audio (USB)” then

press the [>] button.

4. Execute steps 3 – 6 in “Quick MIDI Recording” (page 55).

Unlike with MIDI Recording, the elapsed time is shown on the display

while Audio Recording is being executed.

xxxxx (MIDI Song

selected in step 2-1

above)**

Select this when you want to record additionally to/overwrite

the currently selected MIDI Song.

Recording Target

Song

Description

NOTICE

Note that recording your

performance to a Track

containing data will overwrite

the previously recorded data.

NOTE

The time signature and tempo

cannot be changed when

replacing the part of an

existing MIDI Song.

Audio Recording to the USB Flash Drive

Audio

NOTE

To connect a USB flash drive,

be sure to read the section

“Connecting USB Devices

(USB [TO DEVICE] terminal)”

on page 74.

NOTE

Before starting the Recording

operation, check the remaining

memory capacity of the USB

flash drive. “System” menu:

“Utility”  “USB Properties”

(page 100).

NOTE

With Audio recording, distorted

sound may be produced if the

Voice Volume is set to the value

higher than the default setting.

Make sure to set the Voice

Volume to the default value or

less before recording from the

“Voice” menu display: “Voice

Edit”  “Volume” (page 88).

NOTE

With Audio recording, audio

signals such as those from the

[AUX IN] jack are also

recorded.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Recording Your Performance

Re-recording a MIDI Song in parts

You can re-record a specific range of the MIDI Song.

1. Set the parameters which determine how recording starts

and stops.

1-1. Press the [FUNCTION] button repeatedly to call up the

“Recording” menu display.

1-2. Use the [ ]/[ ] buttons to select “RecStart,” then select the

value which determines how recording starts by using the [>]

button.

1-3. Use the [ ]/[ ] buttons to select “RecEnd,” then select the

value which determines how recording stops by using the [>]

button.

Other Recording Techniques

Normal

The already recorded data will be replaced with the new one as

soon as recording starts.

KeyOn

The already recorded data will be maintained until you press a

key, and actual recording starts as soon as you press a key.

Replace

The data after the point you stop recording will also be erased.

PunchOut

The data after the point you stop recording will remain.

MIDI

785 775 745 735795GP 765GP

FUNCTION

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Recording Your Performance

2. Press the [SONG/DEMO] button to call up the Song List

display.

3. Select the desired MIDI Song.

For instructions, refer to page 44.

4. Specify the start point you wish to re-record.

Use the [<]/[>] buttons to move the playback position (measure number)

to the desired point. Alternately, press the [PLAY/PAUSE] button to start

playback, then press the [PLAY/PAUSE] button again slightly prior to the

desired point.

If necessary, select the settings (Voice and other parameters).

Select the desired settings, if you wish to change the previous ones.

5. Press and hold the [REC] (Record) button for a second to

call up the display which lists the Recording Target Songs,

then select the 4th item (Song selected in step 3), then

press the [>] button to enter the recording mode.

6. Use the [<]/[>] buttons to select a Track for re-recording.

7. Play the keyboard or press the [PLAY/PAUSE] button to

start recording.

8. Press the [REC] (Record) button to stop recording.

9. Save the recorded performance by following step 5 on

page 58.

10.To hear the recorded performance, press the [PLAY/

PAUSE] button.

NOTE

The time signature cannot be

changed when replacing the

part of an existing Song.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Recording Your Performance

Changing the tempo or the Voice of a previously

recorded MIDI Song

For MIDI Songs, you can change the tempo and Voice after recording to change

a feel or to set a more suitable tempo.

To change the tempo:

1. Select the MIDI Song you wish to change.

For instructions, refer to page 44.

2. Press the [TEMPO] button to call up the Tempo display,

then set the desired Tempo.

For instructions, refer to page 39.

3. Press the [FUNCTION] button repeatedly to call up the

“Song” menu display, then select the highlighted item in

each display as illustrated below.

Apply the selected Tempo value to the current MIDI Song data.

Press the [ ] button to highlight “Execute,” then press the [>] button to

apply the new Tempo value to the current MIDI Song data.

MIDI

785 775 745 735

EXIT

FUNCTION

795GP 765GP

“Song” menu display

3-1. Use the [ ]/[ ] buttons

to select “Edit.”

3-2. Press the [>] button to

call up the next display.

3-3. Use the [ ]/[ ] buttons

to select “Tempo Change.”

3-4. Press the [>] button to call up

the next display.

Edit display Tempo Change display

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Recording Your Performance

When this operation is completed, “Completed” is shown on the display,

and the Tempo Change display will be restored after a while.

5. Press the [EXIT] button to exit from the “Song” menu

display.

To change the Voice:

1. Select the MIDI Song you wish to change.

For instructions, refer to page 44.

2. Select the desired Voice.

For instructions, refer to page 30.

3. Press the [FUNCTION] button repeatedly to call up the

“Song” menu display, then select the highlighted item in

each display as illustrated below.

Press the [>] button to call up the setting display, then select

the desired Track using the [ ]/[ ] buttons.

5. Apply the Voice selected in step 2 for the Track selected in

step 4 to the current MIDI Song data.

Press the [<] button to return to the Voice Change display. Press the [ ]

button to highlight “Execute,” then press the [>] button to apply the new

Voice to the current MIDI Song data.

When this operation is completed, “Completed” is shown on the display,

and the Voice Change display will be restored after a while.

6. Press the [EXIT] button to exit from the “Song” menu

display.

“Song” menu display

3-1. Use the [ ]/[ ] buttons

to select “Edit.”

3-2. Press the [>] button to

call up the next display.

3-3. Use the [ ]/[ ] buttons

to select “Voice Change.”

3-4. Press the [>] button to

call up the next display.

Edit display Voice Change display

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Handling Song Files

The “File” menu in the “Song” menu display (page 92) enables you to apply various operations to Song files

— Songs you recorded on this instrument or commercially available Songs.

connect a USB flash drive, be sure to read the section “Precautions when using the USB [TO DEVICE]

terminal” on page 74.

Settings marked with a “*” are effective only when a MIDI Song is selected.

Song Types and File Operation Limitations

Song types are indicated as the category name and icon in

the Song display. The following chart shows the Song type

and restrictions on File operations.

* The icon appears only when you select a Song in the “User” or “USB”

category.

: Yes, ×: No

Range of the Copy/Move operation

As for a MIDI Song in the “User” category in the instrument, you can Copy/Move it

only to the USER FILES folder on a USB flash drive. Selecting a MIDI Song from

“User” for copying/moving automatically specifies the USER FILES folder as the

destination.

As for a MIDI Song in a USB flash drive, you can Copy/Move it to the “User”

category in the instrument.

Operation File menu Page

Deleting files Delete pages 66, 67

Copying files *Copy pages 66, 68

Moving files *Move pages 66, 68

Converting a MIDI Song to an Audio Song during playback *MIDI to Audio pages 66, 69

Renaming files Rename pages 66, 70

Data Location

Song Type

Deleting

files

Renaming

files

Copying

files

Moving

files

Convert a

MIDI Song to

an Audio

Song during

playback

Category

Instrument Demo Demo (Voice Demo) ×××× ×

50 Classical

50 classical Preset Songs ×××× ×

Lesson Lesson Preset Songs ×××× ×

User

Your own recorded Songs (MIDI)

 

USB flash

drive device

USB

MIDI Songs

 

Audio Songs

 ×× ×

Song

name

Icon*

Category name

Instrument

USB flash drive

User

Can be copied/moved.

Root

USER FILES

folder

File

A file contains a group of data.

On this instrument, a Song file

includes Song data and a Song

name.

USER FILES folder

If the USB flash drive device

plugged into the instrument

contains no USER FILES folder,

one will be created

automatically when you format

or record a Song to that device.

The recorded Song will then be

saved in that folder.

NOTE

Please note that the copy

features are intended for your

personal use only.

NOTE

Folders cannot be copied.

Root:

The highest level of a

hierarchical structure. This

indicates an area which does

not belong to a folder.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Handling Song Files

Basic Song File Operation

Song files can be handled via the instructions shown below.

1. Connect the appropriate USB flash drive containing the

desired files to the USB [TO DEVICE] terminal.

2. Select a Song for handling.

For information on selecting a Song, see page 44.

3. Call up the File mode.

3-1. Press the [FUNCTION] button repeatedly to call up the

“Song” menu display. Use the [

]/[ ] buttons to select “File”

then press the [>] button.

3-2. Select the desired operation from “Delete,” “Copy,” “Move,”

“MIDI to Audio” or “Rename.”

From here, if you wish to close the File mode, press the [EXIT] button

once or twice.

785 775 745 735795GP 765GP

EXIT

FUNCTION

“Song” menu display

For example: Renaming files

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Handling Song Files

4. Execute the selected operation.

For specific instructions, refer to the corresponding section.

•

Delete....................................page 67

•

Copy......................................page 68

•

Move .....................................page 68

•

MIDI to Audio...................page 69

•

Rename ................................page 70

During operation, messages (information, confirmation, etc.) may be

shown on the display. For explanations and details, refer to “Message List”

on page 111.

5. Press the [EXIT] button to close the File mode.

For details about Song types which can be deleted, refer to page 65.

See page 66 for information on basic operations.

The following is a detailed procedure of step 4 on that page.

4-1. While “Delete” is highlighted, press the [>] button to call

up the setting display.

4-2. Highlight “Execute” by pressing [ ] button, and then

press the [>] button.

After the Song is deleted, the display returns to the Song List display.

NOTICE

Do not disconnect the USB

flash drive during file handling

or when a USB flash drive is

mounted. Doing so may delete

all data in the USB flash drive

and the instrument.

Deleting Files — Delete

NOTE

You cannot delete multiple

Songs at the same time.

NOTICE

Do not turn off the power or

eject the USB flash drive while

“Executing” is shown in the

display.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Handling Song Files

For details about Song types and ranges that can be copied, refer to page 65.

See page 66 for information on basic operations.

The following is a detailed procedure of step 4 on that page.

4-1. While “Copy” is highlighted, press the [>] button to call

up the setting display.

4-2. Highlight “Execute” by pressing [ ] button, then press

the [>] button.

The selected Song will be copied to the destination with the same name

as the copy source file.

For details about Song types and ranges that can be moved, refer to page 65.

See page 66 for information on basic operations.

The following is a detailed procedure of step 4 on that page.

4-1. While “Move” is highlighted, press the [>] button to call

up the setting display.

4-2. Highlight “Execute” by pressing the [ ] button, then

press the [>] button.

The selected Song will be moved to the destination and the display

returns to the Song list display.

Copying Files — Copy

File

name

Copy destination

Copy destination:

“USB” will be shown when the

copy destination is the USB

flash drive or “User” when the

instrument is the copy

destination. A file copied to the

USB flash drive is stored to the

USER FILES folder on it.

NOTE

A message appears when a

Song with the same name

already exists in the copy

destination. Select “Overwrite”

when you want to overwrite the

selected Song, or “Cancel” to

cancel by using the [

]/[ ]

buttons, and then press the [>]

button.

NOTICE

Overwrite operations erase any

existing data of the copy

destination file and overwrite

with data of the copy source

file.

NOTICE

Do not turn off the power or

eject the USB flash drive while

“Executing” is shown in the

display.

Moving Files — Move

Move destination

“USB” will be shown when the

move destination is the USB

flash drive or “User” when the

instrument is the move

destination. A file moved to the

USB flash drive is stored to the

USER FILES folder on it.

NOTE

A message appears when a

Song with same name already

exists in the move destination.

Select “Overwrite” when you

want to overwrite the selected

Song, or “Cancel” to cancel by

using the [

]/[ ] buttons, then

press the [>] button.

NOTICE

Overwrite operations erase any

existing data of the move

destination file and overwrite

with data of the move source

file.

NOTICE

Do not turn off the power or

eject the USB flash drive while

“Executing” is shown in the

display.

Move destination

File

name

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Handling Song Files

A MIDI Song in the “User” memory of the instrument or on a USB flash drive

can be converted to an Audio Song then saved to the USER FILES folder on a

USB flash drive. For information about which Song types can be converted,

refer to page 65.

See page 66 for information on basic operations.

The following is a detailed procedure of step 4 on that page.

4-1. While “MIDI to Audio” is highlighted, press the [>]

button to call up the setting display.

4-2. Highlight “Execute” by pressing the [ ] button, then

press the [>] button.

This operation starts playback and conversion from MIDI to Audio.

This is basically the same as that of Audio Song Recording, which

allows you to record your keyboard performance and other audio input

sound (page 54). After you convert the Song, a message “Convert

completed” will be shown and the display returns to Song List display.

Convert a MIDI Song to an Audio Song during

Playback — MIDI to Audio

NOTE

After conversion, the MIDI

Song remains in the original

data location.

NOTICE

Do not turn off the power or

disconnect the USB flash drive

during the conversion.

Otherwise the data will be lost.

NOTE

A message appears when a

Song with same name already

exists in the copy destination.

Select “Overwrite” when you

want to overwrite the selected

Song by using the [

]/[ ]

buttons, then press the [>]

button.

NOTE

To cancel this operation, press

the [EXIT] button during the

conversion. When the

operation is canceled, the

converted Audio Song will not

be saved.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Handling Song Files

For details about Song types which can be renamed, refer to page 65.

See page 66 for information on basic operations.

The following is a detailed procedure of step 4 on that page.

4-1. While “Rename” is highlighted, press the [>] button to

call up the setting display.

4-2. Assign a name to the Song.

Use the [<]/[>] buttons to move the cursor highlight (underline).

Use the [

]/[ ] buttons to change the character at the current cursor

position. Pressing the [REC] button will delete the character at the

current cursor position.

A Song name can contain up to 46 characters. Characters which extend

beyond the display capacity and are not visible can be viewed by

moving the highlight by using the [<]/[>] buttons.

4-3. Press the [FUNCTION] button.

After the Song is renamed, the display returns to the Song List display

where the renamed Song can be selected.

Renaming Files — Rename

Cursor

NOTE

For information about the

character types available for

the Song name, refer to

“Language” on page 101.

NOTICE

Do not turn off the power or

eject the USB flash drive while

“Executing” is shown in the

display.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

You can connect other devices to this instrument’s connectors. For information

about location of these connectors, refer to “Panel Controls and Terminals” on

page 14. You can connect this instrument to a smart device such as a

smartphone via Bluetooth (page 77) if the instrument is equipped with

Bluetooth*.

*For information on whether Bluetooth functionality is included or not, refer to page 142.

Connectors

CAUTION

Before connecting the

instrument to other

electronic components, turn

off the power of all the

components. Also, before

turning any components on

or off, make sure to set all

volume levels to minimum

(0). Otherwise, damage to the

components, electrical

shock, or even permanent

hearing loss may occur.

NOTE

Before using the Bluetooth

function, be sure to read

“About Bluetooth” on

page 142.

785 775 745 735 795GP 765GP

Terminals under the keyboard

Bottom (rear view)

785 775 745 735 795GP 765GP

Terminals under the keyboard

Bottom (rear view)

CLP-775

CLP-745/735/765GP

Right

(higher-key side)

Left

(lower-key side)

Right

(higher-key side)

Left

(lower-key side)

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

USB [TO DEVICE] terminal

You can connect a USB flash drive to this terminal, or use a USB wireless LAN adaptor

UD-WL01 (sold separately) to connect with a smart device such as a smartphone. For

details, refer to “Connecting to a Computer” (page 76) or “Using a Smart Device App”

(page 80). Before using the USB [TO DEVICE] terminal, be sure to read “Precautions

when using the USB [TO DEVICE] terminal” on page 74.

USB [TO HOST] terminal

This terminal allows connection to a computer or a smart device, such as smartphone or

tablet. For details, refer to “Connecting to a Computer” (page 76) or “Connecting to a

Smart Device” (page 77).

MIDI [IN], [OUT], [THRU] terminals

These terminals are used to connect external MIDI devices, such as a synthesizer or a

sequencer. For details, refer to “Connecting External MIDI Devices” on page 75.

[AUX PEDAL] jack (CLP-785/795GP)

A separately sold FC7 foot controller or FC4A/FC5 foot switch can be connected to this

jack. By using an FC7 you can control the volume while playing to add expression to

your performance, or control various other functions. By using an FC4A/FC5, you can

switch various selected functions on/off. To select the function that will be controlled,

use the “Aux Assign” (page 98) in the “System” menu display.

[AUX IN] jack

This jack is used to connect an audio player, such as a smartphone or portable audio

player. (See below.)

AUX OUT [L/L+R] [R] jacks (CLP-785/795GP)

AUX OUT [R] [L/L+R] jacks (CLP-775/745/735/765GP)

These jacks are used to connect to external powered speaker systems (page 73).

[PEDAL] jack

This jack allows connection to the pedal cord (CLP-785: page 118, CLP-775: page 121,

CLP-745/735: page 124, CLP-795GP: page 129, CLP-765GP: page 132).

You can connect the headphone jack of an audio player, such as a smartphone

or portable audio player, to the instrument’s [AUX IN] jack. Audio playback on

the connected device is output from the built-in speakers of this instrument.

NOTE

There are two different types of

USB terminals on the

instrument: USB [TO DEVICE]

and USB [TO HOST]. Take care

not to confuse the two

terminals and the

corresponding cable

connectors. Be careful to

connect the proper plug in the

proper direction.

NOTE

• Connect or disconnect the

pedal when the power of this

instrument is turned off.

• Do not press the footswitch/

foot pedal while turning the

power on. Doing this

changes the recognized

polarity of the footswitch,

resulting in reversed

footswitch operation.

Connecting to an Audio Player ([AUX IN] jack)

NOTICE

When the Clavinova’s [AUX IN]

jack is connected to an external

device, first turn on the power to

the external device, then to the

Clavinova. Reverse this order

when you turn the power off.

NOTE

The instrument’s [MASTER

VOLUME] setting affects the

input signal from the [AUX IN]

jack.

NOTE

Use audio cables and adaptor

plugs having no (zero)

resistance.

Instrument

Phone plug (stereo mini) Phone plug (stereo mini)

Portable audio player

Audio cable

Headphone jack

Audio signal

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

These jacks let you connect the Clavinova to external powered speaker systems,

for playing in larger venues at higher volumes.

The Clavinova’s [MASTER VOLUME] setting will affect the sound that is

output from AUX OUT jacks. When the Clavinova’s AUX OUT jacks are

connected to an external speaker and you want to turn off the speaker sound of

the Clavinova, switch the “speaker” parameter to off via the “System” menu:

“Utility” → “Speaker” (page 100).

Using an External Speaker System for Playback

(AUX OUT [L/L+R]/[R] jacks)

NOTE

Use only the [L/L+R] jack for

connection with a monaural

device.

NOTICE

•To avoid possible damage,

first turn on the power to the

instrument, then to the

external device. When turning

off the power, first turn off the

power to the external device,

then to the instrument. Since

this instrument’s power may

automatically be turned off

due to the Auto Power Off

function (page 17), turn off

the power to the external

device, or disable Auto Power

Off when you do not intend to

operate the instrument.

• Do not route the output from

the AUX OUT jacks to the

[AUX IN] jack. If you make

this connection, the signal

input at the [AUX IN] jack is

output from the AUX OUT

jacks. These connections

could result in a

feedbac

loop that will make normal

performance impossible, and

may even damage the

equipment.

NOTE

Use audio cables and adaptor

plugs having no (zero)

resistance.

NOTE

When you are monitoring the

sound output via the AUX OUT

jacks from headphones

connected to the instrument,

we recommend that you set the

Binaural Sampling and

Stereophonic Optimizer

functions to off. For details,

refer to page 22.

785 775 745 735 795GP 765GP

Clavinova

AUX OUT Input jack

Powered speaker

Audio signal

Phone plug (standard) Phone plug (standard)

Audio cable

785 775 745 735 795GP 765GP

Clavinova

AUX OUT Input jack

Powered speaker

Audio cable

Phone plug (standard) Phone plug (standard)

Audio signal

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

You can connect a USB flash drive or a USB wireless LAN adaptor UD-WL01 (sold separately) to the USB

[TO DEVICE] terminal. You can save data you’ve created on the instrument to the USB flash drive (pages 65,

104), or you can connect the instrument to a smart device such as an iPad via wireless LAN (page 81).

Connecting USB Devices (USB [TO DEVICE] Terminal)

Precautions when using the USB

[TO DEVICE] terminal

This instrument features a built-in USB [TO DEVICE]

terminal. When connecting a USB device to the

terminal, be sure to handle the USB device with care.

Follow the important precautions below.

NOTE

For more information about the handling of USB devices, refer

to the owner’s manual of the USB device.

 Compatible USB devices

•USB flash drive

•USB hub

• USB wireless LAN adaptor UD-WL01 (sold

separately; may not be available in some areas)

Other USB devices such as a computer keyboard or

mouse cannot be used.

The instrument does not necessarily support all

commercially available USB devices. Yamaha cannot

guarantee operation of USB devices that you purchase.

Before purchasing a USB device for use with this

instrument, please visit the following web page:

https://download.yamaha.com/

Although USB devices 2.0 to 3.0 can be used on this

instrument, the amount of time for saving to or

loading from the USB device may differ depending

on the type of data or the status of the instrument.

USB 1.1 devices cannot be used on this instrument.

NOTICE

The rating of the USB [TO DEVICE] terminal is a maximum of

5V/500mA. Do not connect USB devices having a rating above

this, since this can cause damage to the instrument itself.

 Connecting a USB device

When connecting a USB device to

the USB [TO DEVICE] terminal,

make sure that the connector on

the device is appropriate and that

it is connected in the proper

direction.

NOTICE

•Avoid connecting or disconnecting the USB device during

playback/recording and file management operations (such

as Save, Copy, Delete and Format), or when accessing the

USB device. Failure to observe this may result in “freezing”

of the operation of the instrument or corruption of the USB

device and the data.

• When connecting then disconnecting the USB device (and

vice versa), make sure to wait a few seconds between the

two operations.

NOTE

If you intend to connect two devices at the same time to a

terminal, you should use a bus-powered USB hub. Only one

USB hub can be used. If an error message appears while

using the USB hub, disconnect the hub from the instrument,

then turn on the power of the instrument and re-connect the

USB hub.

NOTICE

Do not use an extension cable when connecting a USB

device.

Using USB Flash Drives

By connecting the instrument to a USB flash drive,

you can save data you’ve created to the connected

device, as well as read data from the connected USB

flash drive.

 Number of USB flash drives that can be

used

Only one USB flash drive can be connected to the

USB [TO DEVICE] terminal. (If necessary, use a USB

hub. The number of USB flash drives that can be used

simultaneously with musical instruments even when

a USB hub is used is only one.)

 Formatting a USB flash drive

You should format the USB flash drive only with this

instrument (page 100). A USB flash drive formatted

on another device may not operate properly.

NOTICE

The format operation overwrites any previously existing data.

Make sure that the USB flash drive you are formatting does not

contain important data.

 To protect your data (write-protect)

To prevent important data from being inadvertently

erased, apply the write-protect provided with each

USB flash drive. If you are saving data to the USB

flash drive, make sure to disable write-protect.

 Turning off the instrument

When turning off the instrument, make sure that the

instrument is NOT accessing the USB flash drive by

playback/recording or file management (such as

during Save, Copy, Delete and Format operations).

Failure to do so may corrupt the USB flash drive and

the data.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

The sophisticated MIDI functions give you powerful tools to expand your

music performance and creation possibilities. Use the MIDI terminals and

standard MIDI cables to connect external MIDI devices (keyboard, sequencer,

etc.)

• MIDI [IN].......... Receives MIDI messages from another MIDI device.

• MIDI [OUT]......Transmits MIDI messages generated on this instrument to

another MIDI device.

• MIDI [THRU]...Simply relays the MIDI messages received at MIDI IN.

Connecting External MIDI Devices (MIDI

Ter min als )

CAUTION

Before connecting the

instrument to other MIDI

devices, turn off the power of

all the components.

NOTE

For details about MIDI, refer to

“MIDI Basics” downloadable

from the Yamaha website

(page 8).

NOTE

• Since MIDI data that can be

transmitted or received varies

depending on the type of

MIDI device, check the MIDI

Data Format to find out what

MIDI data and commands

your devices can transmit or

receive. The MIDI Data

Format is contained in the

“MIDI Reference”

downloadable from the

Yamaha website (page 8).

• When transmitting MIDI data

from this instrument to an

external MIDI device,

unexpected sounds may

occur because of data

related to the Grand

Expression Modeling.

785 775 745 735 795GP 765GP

Clavinova

MIDI IN MIDI INMIDI OUT MIDI OUT

MIDI transmit

MIDI receive

External MIDI device

785 775 745 735 795GP 765GP

Clavinova

MIDI IN MIDI INMIDI OUT MIDI OUT

MIDI receive

MIDI transmit

External MIDI device

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

By connecting a computer to the [USB TO HOST] terminal via a USB cable,

you can transfer MIDI data or Audio data between the instrument and the

computer. For details on using a computer with this instrument, refer to the

“Computer-related Operations” on the website (page 8).

Transmitting/Receiving Audio Data (USB Audio

Interface function)

By connecting a computer or a smart device to the USB [TO HOST] terminal

via a USB cable, digital audio data can be transmitted/received. This USB

Audio Interface function provides the following advantages:

• Playing back audio data with high sound quality

This gives you direct, clear sound in which the sound quality has less noise

and deterioration than that from the [AUX IN] jack.

• Recording performance on the instrument as audio data by using a

recording software or a music production software

The recorded audio data can be played back on the computer or smart

device.

For instructions on connecting, refer to “Computer-related Operations” or the

“Smart Device Connection Manual” on the website (page 8).

Audio Loopback On/Off

This allows you to set whether audio sound input from the connected

computer or smart device is output to a computer or a smart device or not

along with the performance played on the instrument. To output the audio

input sound, set the Audio Loopback to “On.”

For example, if you want to record the audio input sound as well as the sound

played on the instrument by using the computer or the smart device, set this to

“On.” If you intend to record only the sound played on the instrument by using

the computer or the smart device, set this to “Off.” For details on the settings,

refer to “Audio Loopback” on page 101.

Connecting to a Computer (USB [TO HOST]

Terminal)

NOTICE

• Use an AB type USB cable of

less than 3 meters. USB 3.0

cables cannot be used.

•If you are using a DAW

(digital audio workstation)

application with this

instrument, set the Audio

Loopback function to off (see

below). Otherwise, a loud

sound may occur, depending

on the settings of the

computer or the application

software.

NOTE

• When using a USB cable to

connect the instrument to

your computer, make the

connection directly without

passing through a USB hub.

• For information on setting up

your sequence software,

refer to the owner’s manual of

the relevant software.

• The instrument will begin

transmission a short time

after the computer or smart

device is connected.

• Unexpected sounds may

occur if you edit MIDI data

related to the Grand

Expression Modeling on a

computer.

NOTE

• When transmitting or

receiving audio signals by

using a computer running

Windows, the Yamaha

Steinberg USB Driver should

be installed to the computer.

For details, refer to the

“Computer-related

Operations” on the website.

• The volume of the audio

sound input can be adjusted

from a computer or smart

device.

NOTE

• The Audio Loopback function

also affects the audio input

sound when using the

Bluetooth Audio function

(page 78) or the wireless

LAN connection (page 81).

• The playback sound of an

Audio Song (page 43) is also

output to a computer or smart

device when this is set to “On,”

while the sound is not output

when this is set to “Off.”

• With Audio Recording

(page 54), the audio input

sound from the connected

computer or smart device is

recorded when this is set to

“On,” while the sound is not

recorded when this is set to

“Off.”

Computer

USB cable

USB terminal

Clavinova

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

Connecting a smart device such as a smartphone or tablet allows you to enjoy

the features shown below. You can listen to audio playback from a smart device

on your instrument’s speakers, or use a compatible smart device app to make

playing this instrument easier and more fun. The method of connection varies

depending on your intended use.

• Using a compatible smart device app

Connect the device to this instrument via Bluetooth* or other methods. For

details, refer to page 80.

• Listening to audio played back on a smart device through the

speakers of this instrument (Bluetooth* Audio function)

Connect the device to this instrument via Bluetooth. For details, refer to

page 78.

• Transmitting/receiving audio data (USB Audio Interface function)

Connect the device to this instrument’s USB [TO HOST] terminal via a USB

cable. For details, refer to page 76.

*For information on whether Bluetooth functionality is included or not, refer to page 142.

NOTICE

• Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used.

• Do not place your smart device in an unstable position. Doing so may cause the device to fall and

result in damage.

•If you are using a DAW (digital audio workstation) application with this instrument, set the Audio

Loopback function (page 76) to off. Otherwise, a loud sound may occur, depending on the settings of

the application software.

Connecting to a Smart Device

NOTE

• Before using the USB [TO

DEVICE] terminal, be sure to

read “Precautions when

using the USB [TO DEVICE]

terminal” on page 74.

• When you use the instrument

along with a smart device,

we recommend that you set

that device’s “Airplane

Mode” to on and then the Wi-

Fi/Bluetooth setting to on in

order to avoid noise caused

by communication.

• The instrument will begin

transmission a short time

after the computer or smart

device is connected.

• When using a USB cable to

connect the instrument to

your smart device, make the

connection directly without

passing through a USB hub.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

Listening to Audio Data from a Smart Device through

this Instrument (Bluetooth Audio Function)

You can input the sound of the audio data saved in a Bluetooth-equipped

device, such as a smart phone or digital audio player, to this instrument and

listen to it through the built-in speaker of the instrument.

1. (CLP-785/775/795GP) Hold down the [ ] (Bluetooth)

button for 3 seconds.

(CLP-745/765GP) Hold down the [FUNCTION] button

for 3 seconds.

The pop-up window will appear which indicates that the instrument is

standing by for pairing.

To cancel the pairing, press the [EXIT] button.

Bluetooth capability

The models CLP-785, CLP-775, CLP-745, CLP-795GP and CLP-765GP are equipped

with Bluetooth functionality; however, even these models may not support Bluetooth,

depending on the country in which you purchased the product. If the Bluetooth logo is

shown or printed on the control panel, this means that the product is equipped with

Bluetooth functionality.

785 775 745 735 795GP 765GP

785 775 745795GP 765GP

Bluetooth

logo

Bluetooth

logo

NOTE

• In this manual, “Bluetooth-

equipped device” refers to a

device that can transmit

audio data on it to the

instrument using the

Bluetooth function, via

wireless communication. For

proper operation, the device

must be compatible with

A2DP (Advanced Audio

Distribution Profile). The

Bluetooth Audio function is

explained here by using a

smart device as an example

of such Bluetooth-equipped

devices.

• Refer to page 80 for

transmitting/receiving the

MIDI data between the

instrument and the smart

device via Bluetooth.

• Bluetooth headphones or

speakers cannot be paired.

• When the Bluetooth is set to

Off on this instrument, the

smart device cannot be

connected via Bluetooth. Set

the Bluetooth on beforehand

(page 79).

Paring

“Pairing” means to register

Bluetooth-equipped smart

devices on this instrument,

and establish the mutual

recognition for wireless

communication between the

two.

NOTE

• Only one smart device can

be connected to this

instrument at a time

(although up to 8 smart

devices can be paired to this

instrument). When pairing

with the 9th smart device has

succeeded, pairing data for

the device with the oldest

connection date will be

deleted.

• Make sure to complete the

settings on the smart device

within 5 minutes.

• If you are required to enter a

passkey, enter the numerals

“0000.”

Before using the Bluetooth function, be sure to read “About Bluetooth” on page 142.

785 775 745

Bluetooth

EXIT

FUNCTION

795GP 765GP

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

2. On the smart device, set the Bluetooth function to on and

select “CLP-xxx AUDIO” from the connection list.

For details, refer to the smart device owner’s manual.

After pairing is completed, the connection status will be shown in the

display.

3. Play back audio data on the smart device to confirm that

the built-in speakers of the instrument can output the

audio sound.

When you turn on the instrument the next time, the last-connected smart

device will be connected to this instrument automatically, if the Bluetooth

function of the smart device and the instrument is set to on. If it is not

connected automatically, select the model name of the instrument from

the connection list on the smart device.

Switching the Bluetooth Function On/Off

For information on whether Bluetooth functionality is included or not, refer to

page 142.

By default, the Bluetooth function will be on right after turning the

instrument’s power on, however you can set the function to off.

1. Press the [FUNCTION] button repeatedly to call up the

“System” menu display, then select the highlighted item in

each display as illustrated below.

2. Press the [>] button to switch on/off.

To exit from the “System” menu display, press the [EXIT] button.

Can receive audio data

NOTE

You can adjust the volume of

the sound input via Bluetooth

by the [MASTER VOLUME]

slider. To adjust the volume

balance between your

keyboard performance and

the input sound via Bluetooth,

adjust the volume on the smart

device.

Before using the Bluetooth function, be sure to read “About Bluetooth” on page 142.

785 775 745 735 795GP 765GP

“System” menu display

1-1. Confirm that “Bluetooth”

is selected.

1-2. Press the [>] button to

call up the next display.

1-3. Confirm that “Bluetooth”

is selected.

Bluetooth display

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

By using a compatible smart device app, you can get more enjoyment out of this

instrument. Especially, “Smart Pianist” (available as a free download) lets you

select the Voice and make Metronome settings intuitively, and allows you to

display the notation, depending on the selected data.

Access the web page of the respective apps on the following website for

information on each app, including apps such as “Smart Pianist” that are

compatible with this instrument, as well as for information on which smart

devices are supported.

https://www.yamaha.com/kbdapps/

Connect your smart device to this instrument via Bluetooth or other methods.

Connecting via Bluetooth

For information on whether Bluetooth functionality is included or not, refer to

page 142.

Connect from the settings screen of the app you will be using. For the “Smart

Pianist” app, follow the instructions on the connection wizard (shown below).

Select “CLP-XXX (model name) MIDI” as the Bluetooth device to pair with.

The devices will be able to transmit and receive MIDI data when they are

connected. To play the audio data from your smart device on this instrument,

refer to page 78. The connection status will be shown on the instrument’s

display once the Bluetooth connection has been made.

Using other methods to connect

See the “Smart Device Connection Manual” on the website (page 8) for how to

connect using other methods. When connecting using the UD-WL01 (sold

separately), you will need to make settings on the instrument, following the

steps in the “Smart Device Connection Manual.” For details, refer to page 81.

To use the “Smart Pianist” app, connect by following the instructions on the

“Smart Pianist” connection wizard (shown below).

Using a Smart Device App

NOTICE

Activating the “Smart Pianist”

app while the instrument is

connected to the smart device

overwrites the settings on the

instrument by that of “Smart

Pianist.” Save your important

setup data as a backup file to a

USB flash drive (page 104).

NOTE

When using the “Smart Pianist”

app, you cannot use any

buttons on the instrument other

than the [EXIT] button. Control

the instrument by using “Smart

Pianist.” Pressing the [EXIT]

button on the instrument

disconnects the instrument

from the “Smart Pianist” app,

and enables you to control the

instrument by using its

buttons.

NOTE

A smart device cannot be

connected when the Bluetooth

function of this instrument is

set to off. (The default setting:

On) Refer to page 79 for how

to set On or Off.

Before using the Bluetooth function, be sure to read “About Bluetooth” on page 142.

Connection wizard of “Smart Pianist”

After downloading the “Smart Pianist” to your smart device and starting the “Smart

Pianist,” tap “ ” (Menu) located at the upper left on the “Smart Pianist” screen to

open the Menu, and then tap “Instrument” →“Start Connection Wizard” to start the

connection wizard.

785 775 745 735 795GP 765GP

Voice display

Can transmit and receive MIDI data

Can transmit and receive MIDI data,

and receive audio data

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

Connecting via Wireless LAN (with the UD-WL01*)

*The USB wireless LAN adaptor UD-WL01 (sold separately) may not be available

depending on your area.

When connecting a smart device by using the USB wireless LAN adaptor, start

wireless connection according to the instructions in the “Smart Device

Connection Manual” on the website, then make sure to set up the instrument

appropriately, using the following instructions “Displaying the Wireless LAN

Networks and Connecting to a Network,” “Automatic Setup by WPS,” “Manual

Setup” or “Connecting by the Accesspoint Mode.” Refer to pages 81 – 85 in this

Owner’s Manual for the required operations on this instrument.

 Displaying the Wireless LAN Networks and connecting to

a Network

Make sure to connect the USB wireless LAN adaptor (sold separately) to the

USB [TO DEVICE] terminal, otherwise the displays for setup below will not be

shown.

1. Press the [FUNCTION] button repeatedly to call up the

“System” menu display, then select the highlighted item in

each display as illustrated below.

NOTICE

Do not connect this product to

public Wi-Fi and/or Internet

directly. Only connect this

product to the Internet through

a router with strong password-

protections. Consult your router

manufacturer for information on

security best practices.

NOTE

If the menus shown in the

Wireless LAN display, are

different from those shown

here, the instrument is in the

Accesspoint mode. Set the

Wireless LAN Mode parameter

to “Infrastructure Mode” by

following the step 1 on

page 84.

785 775 745 735

FUNCTION

795GP 765GP

“System” menu display

1-1. Use the [ ]/[ ] buttons

to select “Utility.”

1-2. Press the [>] button to

call up the next display.

1-3. Use the [ ]/[ ] buttons

to select “Wireless LAN.”

1-4. Press the [>] button to

call up the next display.

1-5. Use the [ ]/[ ] buttons

to select “Select

Network.”

Utility display Wireless LAN display

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

2. Press the [>] button to call up the network list.

For a network with a lock icon , you need to enter the proper

password.

3. Connect the instrument to the Network.

3-1. Select the desired network, then press the [>] button.

The name of the selected network will be fully shown in the display,

letting you confirm this is the network you want to use.

3-2. Press the [>] button.

• For a network without a lock icon:

Connecting starts.

• For a network with a lock icon:

You need to enter the proper password. For details on how to enter

characters, refer to the “Renaming files” on page 70. After entering the

password, press the [FUNCTION] button to finalize the setting. This

operation starts connecting automatically.

When connection is done successfully, “Completed” is shown in the

display, and returns to the “Select Network” display.

4. Connect the smart device to the access point.

For instructions on the setup for the smart device, refer to the “Smart

Device Connection Manual” on the website (page 8).

 Automatic Setup by WPS

Please make sure to connect the USB wireless LAN adaptor (sold separately) to

the USB [TO DEVICE] terminal, otherwise the displays for setup will not be

shown.

If your access point supports WPS, you can easily connect the instrument to

access point by WPS, without making settings, such as password input, etc.

Press the WPS button on the USB wireless LAN adaptor more than 3 seconds,

and press the WPS button on your access point within two minutes.

When connection is done successfully, “Completed” is shown in the display,

and the Voice display will be shown.

Finally, connect the smart device to the access point. For instructions on the

setup for the smart device, refer to the “Smart Device Connection Manual” on

the website (page 8).

NOTE

If no signal from the access

point is received, the access

point cannot be listed. Also,

closed access points cannot

be listed.

NOTE

WPS setup is not available

while the instrument is in the

following modes or conditions:

• While a Song or a Demo

Song is playing back or

being paused temporarily, or

while the instrument is in the

Song Recording mode.

• When Wireless LAN mode is

set to “Accesspoint Mode” in

the “System” menu.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

 Manual Setup

Make sure to connect the USB wireless LAN adaptor (sold separately) to the

USB [TO DEVICE] terminal, otherwise the displays for setup will not be

shown.

1. To call up the network list, perform steps 1 – 2 in the

“Displaying the Wireless LAN Networks and connecting to

a Network” (page 81).

2. Select “Other” at the bottom of the network list, then press

the [>] button.

3. Set the SSID, Security and Password to the same as the

settings on the access point.

3-1. Select the “SSID” then press the [>] button to call up the

display for SSID input, then enter the SSID.

For details on how to enter the characters, refer to “Renaming files” on

page 70. After entering the SSID, press the [FUNCTION] button to

finalize the setting. Operation returns to the “Other” display.

3-2. Select “Security” then press the [>] button to call up the

Security list. Select the security then return to the “Other”

display by pressing the [<] button.

3-3. Select “Password,” then set the password in the same way as

SSID.

4. Select “Connect >” at the bottom of the display shown in

step 3, then press the [>] button to start connecting.

When connection is done successfully, “Completed” is shown in the

display, and returns to the “Select Network” display.

5. Connect the smart device to the access point.

For instructions on the setup for the smart device, refer to the “Smart

Device Connection Manual” on the website (page 8).

NOTE

The password cannot be set

when you select “none” for the

security setting.

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

 Connecting by the Accesspoint Mode

Please make sure to connect the USB wireless LAN adaptor (sold separately) to

the USB [TO DEVICE] terminal, otherwise the displays for setup will not be

shown.

1. Switch the instrument to the “Accesspoint Mode.”

Press the [FUNCTION] button repeatedly to call up the “System” menu

display, then select the highlighted item in each display as illustrated

below.

When mode change is done successfully, “Completed” is shown in the

display, operation returns to the Wireless LAN Mode display.

NOTE

This cannot be used to connect

to the internet or another

wireless LAN device.

785 775 745 735

FUNCTION

795GP 765GP

“System” menu display

1-1. Use the [ ]/[ ] buttons

to select “Utility.”

1-2. Press the [>] button to

call up the next display.

1-3. Use the [ ]/[ ] buttons to

select “Wireless LAN Option.”

1-4. Press the [>] button to call up

the next display.

1-5. Use the [ ]/[ ] buttons to

select “Wireless LAN Mode.”

1-6. Press the [>] button to call

up the next display.

Utility display

Wireless LAN Option display

1-7. Use the [ ]/[ ] buttons to

select “Accesspoint Mode.”

Wireless LAN Mode display

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Connections

2. Set SSID, Security, Password and Channel.

2-1. From the “System” menu display, select the highlighted item

in each display as illustrated below.

2-2. Set the SSID, Security, Password and Channel.

Select and enter each value/setting in the same way as in step 3 in

“Manual Setup.” For the setting range for each item, refer to “Wireless

LAN” (In the Accesspoint mode) on page 102.

3. Save the setting.

Select “Save >” at the bottom of the Wireless LAN display, then press the

[>] button to start saving.

When saving is done successfully, “Completed” is shown in the display,

and operation returns to the Utility display.

4. Connect the smart device to the instrument (as an access

point).

For instructions on the setup for the smart device, refer to the “Smart

Device Connection Manual” on the website (page 8).

“System” menu display Utility display Wireless LAN display

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Detailed Settings (Menu Display)

Pressing the [FUNCTION] button opens one of the five menu displays (Voice, Song, Metronome/Rhythm,

Recording and System). You can make settings for various functions from these menu displays.

Common Operations in the Menu Displays

If you want to edit items related to Voice or Song, you will need to make the necessary preparations before

opening the menu display.

• If you want to edit Voice-related parameters (by calling up the “Voice” menu), select a Voice. If you want to edit

parameters related to the R1/R2/L Voices, such as volume balance, turn on Dual/Split/Duo, then select the

desired Voices.

• If you want to set Song playback parameters, such as Repeat, select a Song.

• If you want to edit your recorded MIDI Song data (by calling up Edit in the “Song” menu), select the recorded

MIDI Song.

1. Press the [FUNCTION] button several times to select the desired menu.

Pressing the [FUNCTION] button repeatedly will call up the following menu displays in order, according

to the vertical menu at the left of the display.

Voice menu (page 87)

Song menu (page 92)

Metronome/Rhythm menu (page 95)

Recording menu (page 96)

/ System menu (page 97)

2. Use the [ ]/[ ]/[<]/[>] buttons to select the desired parameter.

While referring as needed to the parameter list on each page listed in step 1, use the [ ]/[ ] buttons to

navigate through the display vertically and use the [<]/[>] buttons to navigate through display horizontally.

3. In the display called up in step 2, use the [ ]/[ ]/[<]/[>] buttons to select a value

or execute the operation.

Most displays allow you to select a value by simply using the [ ]/[ ] buttons, although some, such as Edit

in the “Song” menu and Backup in the “System” menu, let you execute an operation.

If a pop-up window is shown, set the value with the [<]/[>] buttons, then exit from the window using the

[EXIT] button.

Also, when the selected parameter provides only two options (on and off, for example), simply pressing the

[>] button will alternate the value between the two options.

4. To exit from the menu display, press the [EXIT] button.

795GP 765GP785 775 745 735

EXIT

FUNCTION

Menu name

Menu icon

Voice Menu

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Voice Menu

This menu lets you edit or set various parameters related to keyboard performance, such as Voice

parameters. By turning on Dual/Split/Duo, you can make the settings for each Voice or each Voice

combination. While playing the keyboard and hearing the sound, change a parameter value to find your

desired sound. Note that you should turn on Dual/Split/Duo before calling up the “Voice” menu display.

NOTE

Parameters with * are shown only when Dual/Split/Duo is on.

To call up the desired parameter:

Turn on Dual, Split or Duo as necessary, select Voices as necessary, press the

[FUNCTION] button several times to select “Voice” menu, then use the [ ]/[ ]/

[<]/[>] buttons to select the desired parameter.

[>]

[<]

[>]

[<]

[>]

[<]

Description Default setting Setting range

Transpose (Pop-up

window)

– Shifts the pitch of the entire keyboard up or down in

semitone intervals to facilitate playing in difficult key

signatures, and to let you easily match the pitch of the

keyboard to the range of a singer or other instruments.

For example, if you set this parameter to “5,” playing key

C produces pitch F. In this way, you can play the F major

song as if it were in C major.

NOTE

The setting here will not affect Song playback. If you want to

transpose Song playback, use the Transpose parameter in

the “Song” menu (page 92).

NOTE

Your keyboard performance data will be transmitted with the

transposed note numbers while MIDI note numbers received

from an external MIDI device or computer will not be affected

by the Transpose setting.

0 -12 (-1 octave) – 0

(normal pitch) –

+12 (+1 octave)

Piano

Setting

Lid Position (Setting

display)

Refer to the description of “Lid Position” on page 28.

VRM – Refer to the description of “VRM” on page 28. Demo cannot be played in Voice Menu.

NOTE

VRM is effective only for Voices in the Piano group.

Damper

Res.

(Resonance)

(Setting

display)

Damper

Noise

–

String Res.

(Resonance)

(Setting

display)

Duplex

Scale Res.

(Resonance)

(Setting

display)

Body Res.

(Resonance)

(Setting

display)

Grand Exp.

(Expression)

– Refer to the description of “Grand Expression” on page 29. Demo cannot be played in Voice

Menu.

NOTE

Grand Expression Modeling is effective only for the Voices of “CFX Grand” and “Bösendorfer.”

Reverb (Setting

display)

– Determines the Reverb type which is applied to all the

entire sound including the keyboard performance, Song

playback and MIDI data input from an external MIDI

device.

Differs depending

on the Voice or

Voice

combination.

Refer to the

Reverb Type List

(page 90).

Chorus (Setting

display)

– Determines the Chorus type which is applied to all the

entire sound including the keyboard performance, Song

playback and MIDI data input from an external MIDI

device.

Differs depending

on the Voice or

Voice

combination.

Refer to the

Chorus Type List

(page 90).

785 775

745 735

795GP

765GP

Voice Menu

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Voice Edit (Voice names)* Octave Shifts the pitch of the keyboard up and down in octave

steps. This parameter can be set for each Voices when

Dual/Split/Duo is on.

Differs depending

on the Voice or

Voice

combination.

-2 (two octaves

lower) – 0 (no

pitch shift) – +2

(two octaves

higher)

Volume Adjusts the volume for each of the R1/R2/L Voices. This

lets you adjust the balance between the R1/R2/L Voices

when Dual/Split/Duo is on.

Differs depending

on the Voice or

Voice

combination.

0 – 127

Reverb Depth Adjusts the Reverb depth for each of the R1/R2/L Voices.

This lets you adjust the balance between the R1/R2/L

Voices when Dual/Split/Duo is on. The “0” setting will

produce no effect.

NOTE

When a VRM Voice is used for several parts simultaneously,

unexpected sounds may result since the Reverb depth for a

part which has priority will become the common setting for the

parts. During Song playback, setting for a Song part is used

(priority order: Ch. 1, Ch. 2...Ch. 16), while the setting for a

keyboard part is used when Song playback is stopped

(priority order: R1, L and R2 Voices).

Differs depending

on the Voice or

Voice

combination.

0 – 40

Chorus Depth Adjusts the Chorus depth for each of the R1/R2/L Voices.

This lets you adjust the balance between the R1/R2/L

Voices when Dual/Split/Duo is on. The “0” setting will

produce no effect.

NOTE

When a VRM Voice is used for several parts simultaneously,

unexpected sounds may result since the Chorus depth for a

part which has priority will become the common setting for the

parts. During Song playback, setting for a Song part is used

(priority order: Ch. 1, Ch. 2...Ch. 16), while the setting for a

keyboard part is used when Song playback is stopped

(priority order: R1, L and R2 Voices).

Differs depending

on the Voice or

Voice

combination.

0 – 127

Effect In addition Reverb and Chorus, another Effect can be

applied to the R1/R2/L Voices of the keyboard

independently. Note that this Effect type can be selected

for up to two Voices.

Differs depending

on the Voice or

Voice

combination.

Refer to the Effect

Type List

(page 90).

Rotary Speed Available only for the Voice of which the Effect Type is set

to “Rotary.” This parameter determines the rotation

speed of the Rotary Speaker effect.

Differs depending

on the Voice or

Voice

combination.

Fast, Slow

VibeRotor Available only for the Voice of which the Effect Type is set

to “VibeRotor.” This parameter turns on or off the

VibeRotor effect.

Differs depending

on the Voice or

Voice

combination.

On, Off

VibeRotor

Speed

Available only for the Voice of which the Effect Type is set

to “VibeRotor.” This parameter determines the speed of

the Vibraphone vibrato effect.

Differs depending

on the Voice or

Voice

combination.

1 – 10

Effect Depth Adjusts the Effect depth for each of the R1/R2/L Voices.

Note that some Effect types do not allow you to adjust the

depth.

Differs depending

on the Voice or

Voice

combination.

1 – 127

Pan Adjusts the stereo pan position for each of the R1/R2/L

Voices.

Differs depending

on the Voice or

Voice

combination.

L64 (leftmost) – C

(center) – R63

(rightmost)

To call up the desired parameter:

Turn on Dual, Split or Duo as necessary, select Voices as necessary, press the

[FUNCTION] button several times to select “Voice” menu, then use the [ ]/[ ]/

[<]/[>] buttons to select the desired parameter.

[>]

[<]

[>]

[<]

[>]

[<]

Description Default setting Setting range

785 775

745 735

795GP

765GP

Voice Menu

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Voice Edit (Voice names)* Harmonic Cont Produces a distinctive “peaky” tone by raising the

Resonance value of the Filter. This parameter can be set

for each of the R1/R2/L Voices when Dual/Split/Duo is on.

NOTE

Harmonic content may have little audible effect or not be

applied to some Voices.

Differs depending

on the Voice or

Voice

combination.

-64 – +63

Brightness Adjusts the brightness of the R1/R2/L Voices

independently.

Differs depending

on the Voice or

Voice

combination.

-64 – +63

Touch Sens. Determines the degree to which the volume level

changes in response to your touch on the keyboard (how

hard you play). Since the volume level of some Voices

such as Harpsichord and Organ do not change

regardless of how you play the keyboard, the default

setting for these Voices is 127.

Differs depending

on the Voice or

Voice

combination.

0 (softest) – 64

(largest changes in

the level) – 127

(which produces the

loudest volume

regardless of how

you play the

keyboard)

RPedal Turns the Right pedal function on or off for each of the

R1/R2/L Voices. This parameter is useful when you want

to ensure, for example, that the pedal function affects the

right-hand performance but does not affect the left-hand

performance.

Differs depending

on the Voice or

Voice

combination.

On, Off

CPedal Turns the Center pedal function on or off for each of the

R1/R2/L Voices. This parameter is useful when you want

to ensure, for example, that the pedal function affects the

right-hand performance but does not affect the left-hand

performance.

Differs depending

on the Voice or

Voice

combination.

On, Off

LPedal Turns the Left pedal function on or off for each of the R1/

R2/L Voices. This parameter is useful when you want to

ensure, for example, that the pedal function affects the

right-hand performance but does not affect the left-hand

performance.

Differs depending

on the Voice or

Voice

combination.

On, Off

Pedal

Assign

Right (Setting

display)

Assigns one of various functions (other than the original

one) to the Right pedal.

SustainCont Refer to the Pedal

Function List

(page 91).

Center (Setting

display)

Assigns one of various functions (other than the original

one) to the Center pedal.

Sostenuto Refer to the Pedal

Function List

(page 91).

Left (Setting

display)

Assigns one of various functions (other than the original

one) to the Left pedal.

Rotary Speed

(Mellow Organ),

Vibe Rotor

(Vibraphone), Soft

(other Voices)

Refer to the Pedal

Function List

(page 91).

Balance* Volume

R2 – R1*

(Pop-up

window)

Adjusts the volume balance between R1 and R2 Voices

when Dual is on. After adjusting this with the [<]/[>]

buttons, press the [EXIT] button to exit from the pop-up

window.

Differs depending

on the Voice or

Voice

combination.

R2+10 – 0 –

R1+10

Volume L – R* (Pop-up

window)

Adjusts the volume balance between the left and right

keyboard sections when Split/Duo is on. After adjusting

via the [<]/[>] buttons, press the [EXIT] button to exit

from the pop-up window.

Differs depending

on the Voice or

Voice

combination.

L+10 – 0 – R+10

To call up the desired parameter:

Turn on Dual, Split or Duo as necessary, select Voices as necessary, press the

[FUNCTION] button several times to select “Voice” menu, then use the [ ]/[ ]/

[<]/[>] buttons to select the desired parameter.

[>]

[<]

[>]

[<]

[>]

[<]

Description Default setting Setting range

785 775

745 735

795GP

765GP

Voice Menu

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

 Reverb Type List

 Chorus Type List

 Effect Type List

Balance*

Detune* (Pop-up

window)

Detunes the R1 Voice and R2 Voice in Dual mode to

create a thicker sound.

On the display, move the slider rightward via the [>]

button will raise the R1 Voice pitch and lower the R2

Voice pitch, and vice versa. After adjusting this, press the

[EXIT] button to exit from the pop-up window.

Differs depending

on the Voice or

Voice

combination.

R2+20 – 0 –

R1+20

Off No effect

Recital Hall Simulates clear reverberation in a mid-sized hall suitable for piano recital.

Concert Hall Simulates brilliant reverberation in a large hall for public orchestra performances.

Chamber Simulates the elegant reverberation in a small room suitable for chamber music.

Cathedral Simulates the solemn reverberation in a high-ceiling stone-made cathedral.

Club Simulates the lively reverberation in a jazz club or a small bar.

Plate Simulates the bright sound of vintage reverb equipment used in recording studios.

Off No effect

Chorus Adds a rich, spacious sound.

Celeste Adds swell and a spacious sound.

Flanger Adds swell effects similar to the sound of an ascending or descending jet plane.

Off No effect

DelayLCR Delay applied at left, center, and right positions.

DelayLR Delay applied at left and right positions.

Echo Echo-like delay

CrossDelay Left and right delays cross each other in alternation.

Symphonic Adds a rich and deep acoustic effect.

Rotary Adds the vibrato effect of a rotary speaker.

Tremolo The volume level changes in rapid cycles.

VibeRotor The vibrato effect of a vibraphone.

AutoPan The sound pans left to right and back and forth.

Phaser The phase changes periodically, swelling the sound.

AutoWah The center frequency of the wah filter changes periodically.

Distortion Distorts the sound.

To call up the desired parameter:

Turn on Dual, Split or Duo as necessary, select Voices as necessary, press the

[FUNCTION] button several times to select “Voice” menu, then use the [ ]/[ ]/

[<]/[>] buttons to select the desired parameter.

[>]

[<]

[>]

[<]

[>]

[<]

Description Default setting Setting range

785 775

745 735

795GP

765GP

Voice Menu

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

 Pedal Function List

When you want to assign a function marked with * to the pedal connected to the [AUX PEDAL] jack (CLP-785/795GP), you should use a Foot

Controller (page 72). For other functions, you should use a Footswitch (page 72).

Function Description

Available pedal

(O: Can be assigned, X: Cannot)

Left

pedal

Center

pedal

Right

pedal

Pedal

connected

to the [AUX

PEDAL] jack

(CLP-785/

795GP)

Sustain (Switch) On/off switch type damper O O O O

Sustain

Continuously

Damper that sustains the sound proportionately to how deeply you press

the pedal (page 23)

XXO X

Sostenuto Sostenuto (page 23) O O O O

Soft Soft (page 23) O O O O

Expression* A function that lets you create changes in dynamics (volume) as you play X X X O

PitchBend Up* A function that smoothly raises the pitch X X O O

PitchBend Down* A function that smoothly lowers the pitch X X O O

Rotary Speed Changes the rotational speed of the MellowOrgan rotary speaker (switches

between fast and slow each time you press the pedal)

OOO O

VibeRotor Switches the vibraphone vibrato on/off (switches on/off each time you

press the pedal)

OOO O

Song Menu

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Song Menu

This menu lets you set various parameters related to Song playback and edit the Song data with a single

touch. Select a desired Song before beginning the operation.

NOTE

• The parameters marked with * will be available only when a MIDI Song is selected. These parameters are not shown when an Audio

Song is selected.

• The parameters marked with ** will be available only when an Audio Song is selected.

• When using the “Edit” menu, select a MIDI Song other than the preset Song.

• Execute is a function that edits or changes the current Song data. Note that pressing the [>] button will actually change the Song data.

• The content of the “Song” menu differs depending on the type of Song currently selected (MIDI/Audio).

To call up the desired parameter:

Select a Song as necessary, press the [FUNCTION] button several times to

select “Song” menu, then use the [ ]/[ ]/[<]/[>] buttons to select the desired

parameter.

[>]

[<]

[>]

[<]

[>]

[<]

Description Default setting Setting range

L/R* R, L, Other – Turns on (Play) or off (Mute) each of the Song tracks.

For details, refer to page 48.

On On, Off

Repeat A – B* (Setting display) Lets you play back a specified range (from Point A to B)

of the current Song repeatedly. For instructions, refer to

page 49.

Off On, Off

Phrase* Phrase Mark This parameter is available only when a MIDI Song

containing the Phrase Mark. By specifying a Phrase

number here, you can play back the current Song from

the mark point, or to play back the corresponding

phrase repeatedly. If you start Song playback with a

Phrase set to “On,” the countdown starts, followed by

repeated playback of the specified phrase or phrases

until you press the [PLAY/PAUSE] button.

000 000 – the last

phrase number of

the Song

Repeat Off On (repeat

playback)/Off (no

repeat)

Song (Setting display) By setting this parameter, you can play back only a

specific Song, or specific Songs in order repeatedly or

randomly. For details, refer to page 49.

Off Off, Single, All,

Random

Volume Song –

Keyboard*

(Pop-up

window)

Adjusts the volume balance between the Song

playback sound and keyboard performance.

0 Key+64 – 0 –

Song+64

Song L – R* (Pop-up

window)

Adjusts the volume balance between the right-hand

part left-hand parts of Song playback.

0 L+64 – 0 – R+64

(Pop-up window)** Adjusts the Audio volume. 100 0 – 127

Transpose (Setting display) – Shifts the pitch of Song playback up or down in

semitone intervals. For example, if you set this

parameter to “5,” a Song created in C major will be

played back in F major.

NOTE

The Transpose setting will not affect the audio signals, such

as those input from the [AUX IN] jack.

NOTE

MIDI Song playback data will be transmitted with the

transposed note numbers while MIDI note numbers

received from an external MIDI device or computer will not

be affected by the Transpose setting.

NOTE

Applying transpose to an Audio Song may change its tonal

characteristics.

0 -12 (-1 octave) – 0

(normal pitch) –

+12 (+1 octave)

File Delete Cancel Deletes a specific Song. For details about Song types

which can be deleted, refer to page 65.

––

Execute ––

Copy* Cancel Copies a specific MIDI Song then saves it to a different

location. For details about Song types which can be

copied, refer to page 65.

––

Execute ––

785 775

745 735

795GP

765GP

Song Menu

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

NOTE

Tempo of Song playback can be set on the display called up by pressing the [TEMPO] button. For instructions, refer to page 47.

File Move* Cancel Moves a MIDI Song to a different location. For details

about Song types which can be moved, refer to

page 65.

––

Execute ––

MIDI to Audio* Cancel Converts a MIDI Song to an Audio file. For details about

Song types which can be converted, refer to page 65.

––

Execute ––

Rename (Setting display) Edits a Song name. For details about Song types which

can be renamed, refer to page 65.

––

Edit* Quantize Quantize The Quantize function allows you to align all the notes in

the current MIDI Song to the correct timing, such as 8th

note or 16th note.

1. Set the Quantize value to the smallest notes in the

MIDI Song.

2. Set the Strength value which determines how

strongly the notes will be quantized.

3. Move the highlight to “Execute” then press the

[>] button to actually change the MIDI Song data.

1/16 Refer to “Quantize

setting range.”

(page 94)

Strength 100% 0% – 100%

Refer to “Strength

setting range.”

(page 94)

Execute ––

Track Delete Track Deletes a specific track data of the current MIDI Song.

1. Select the desired track to be deleted.

2. Move the highlight to “Execute,” then press the

[>] button to actually delete the specified track data.

Track 1 Track 1 – Track 16

Execute ––

Tempo Change Cancel Changes the tempo value of the current MIDI Song as

data. Before calling up the “Song” menu display, set the

desired Tempo value for changing.

Move the highlight to “Execute,” then press the [>] button

to actually change the Tempo value as MIDI Song data.

Differs depending

on the Song

–

Execute ––

Voice Change Track Changes the Voice of a specific track in the current

MIDI Song to the current Voice as data.

1. Select a track of which the Voice will be changed.

2. Move the highlight to “Execute,” then press the

[>] button to actually change the Voice as MIDI Song

data.

Track 1 Track 1 – Track 16

Execute ––

Others* Quick Play – This parameter enables you to specify whether a Song

that starts from the middle of a bar, or a Song with a

silence prior to the first note, should be played from the

first note or from the top of the bar (rest or blank). This

parameter is useful for a MIDI Song that starts with a

short one-or two-beat pick-up or lead-in.

On On, Off

Track Listen Track This lets you play back only the selected Track to listen

to its contents. To do this, select a Track, move the

highlight to “Start,” then press and hold the [>] button to

start playback from the first note. Playback continues

while holding the [>] button.

Track 1 Track 1 – Track 16

Start

Play Track – This parameter enables you to specify the tracks for

playing back on this instrument. When “1&2” is

selected, only tracks 1 and 2 will be played back, while

tracks 3 to 16 will be transmitted via MIDI. When “All” is

selected, all tracks will be played back on this

instrument.

All All, 1&2

To call up the desired parameter:

Select a Song as necessary, press the [FUNCTION] button several times to

select “Song” menu, then use the [ ]/[ ]/[<]/[>] buttons to select the desired

parameter.

[>]

[<]

[>]

[<]

[>]

[<]

Description Default setting Setting range

785 775

745 735

795GP

765GP

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Song Menu

 Quantize Supplementary

Quantize setting range

The three Quantize settings marked with asterisks (*) are exceptionally

convenient, since they allow you to quantize two different note values

at the same time. For example, when the straight eighth notes and

eighth notes triplet are contained in the same part, if you quantize by

straight eighth notes, all notes in the part are quantized to straight

eighth notes—completely eliminating any triplet feel. However, if you

use the eighth note + eighth note triplet setting, both the straight and

triplet notes will be quantized correctly.

Strength setting range

1/4................

1/8................

1/16..............

1/6................

1/12..............

1/24..............

1/8+1/12.......

1/16+1/24.....

1/32..............

1/16+1/12.....

quarter note

quarter note triplet

eighth note

eighth note triplet

sixteenth note

sixteenth note triplet

thirty-second note

eighth note + eighth note triplet*

sixteenth note + eighth note triplet*

sixteenth note + sixteenth triplet*

Original data

Quantizing strength = 100

Quantizing strength = 50

Quarter-note length

Metronome/Rhythm Menu

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Metronome/Rhythm Menu

This menu lets you set the volume and tempo indication format of the Metronome (page 39) or Rhythm

(page 42). In addition, you can set the bell sound of the Metronome to play back at the first beat and adjust

parameters related to Rhythm playback variation.

 Setting the Tempo

Tempo of Metronome/Rhythm can be set on the display called up by pressing the [TEMPO] button. For

details on setting the Tempo for the Metronome or Rhythm, refer to page 39.

To call up the desired parameter:

Press the [FUNCTION] button several times to select “Metronome/Rhythm”

menu, then use the [ ]/[ ] buttons to select the desired parameter.

[>]

[<]

[>]

[<]

[>]

[<]

Description Default setting Setting range

Time Signature (Setting

display)

– Determines the time signature of the metronome. When

you select or playback MIDI Songs, this will automatically

be changed to the time signature of the selected songs.

4/4 2/2, 1/4, 2/4, 3/4,

4/4, 5/4, 6/4, 7/4,

3/8, 6/8, 7/8, 9/8,

12/8

Volume (Pop-up

window)

– Determines the volume of the Metronome or Rhythm. You

can adjust the volume balance between the keyboard

performance and Metronome/Rhythm playback.

82 0 – 127

BPM – – Determines whether the note type of the tempo indication

is affected by the Metronome Time Signature (page 40) or

not (crotchet). When “Time Sig.” is selected, the

denominator of the Time Signature is shown as the note

type of the tempo indication. (The dotted quarter note is

shown as the note type of the tempo indication only when

the Time Signature is set to “6/8,” “9/8,” or “12/8.”)

Time Sig. Time Sig.,

Crotchet

Bell – – Determines whether or not the bell sound is played back

at the first beat of the specified Time Signature.

Off On, Off

Intro – – Determines whether the Intro is played back or not before

the Rhythm pattern is started.

NOTE

During Song playback, the Intro cannot be played back even if

you start the Rhythm with this parameter set to “On.”

On On, Off

Ending – – Determines whether the Ending is played back or not

before the Rhythm pattern is stopped.

On On, Off

SyncStart – – When this is set to “On,” you can start Rhythm playback

also by pressing any note on the keyboard.

When you want to use this function, follow the instructions

below:

1. Set this function to on.

2. Press the [RHYTHM] button to enter the Synchro start

standby mode.

The [RHYTHM] button flashes.

3. Press any key to start with the rhythm.

Off On, Off

Bass – – Determines whether the auto bass accompaniment for

the Rhythm is on or off.

On On, Off

785 775

745 735

795GP

765GP

Recording Menu

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Recording Menu

This menu lets you make detailed settings related to MIDI Recording (page 54).

NOTE

The settings here will not affect Audio Recording.

To call up the desired parameter:

Press the [FUNCTION] button several times to select “Recording” menu, then

use the [ ]/[ ] buttons to select the desired parameter.

[>]

[<]

[>]

[<]

[>]

[<]

Description Default setting Setting range

RecStart – – This parameter, which is used when you overwrite the already

recorded MIDI Song, determines when the actual MIDI

Recording starts after you execute the Recording Start

operation. When set to “Normal,” actual recording will starts

as soon as you execute the Recording Start operation. When

set to “KeyOn,” actual recording starts as soon as you press

any key after you execute the Recording Start operation.

Normal Normal, KeyOn

RecEnd – – This parameter, which is used when you overwrite the already

recorded MIDI Song, determines whether the existing data

after the point at which you stop recording will be erased or

not.

Replace Replace,

PunchOut

RecRhythm – – Determines whether or not Rhythm playback will be recorded

during MIDI Recording.

On On, Off

785 775

745 735

795GP

765GP

System Menu

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

System Menu

This menu lets you make the overall settings applied to the entire instrument.

Bluetooth compatibility is indicated by the following icons. (For details on Bluetooth compatibility, see

page 142.)

: models equipped with Bluetooth

: models not equipped with Bluetooth

NOTE

Parameters marked with * are available only if the instrument is equipped with Bluetooth functionality.

To call up the desired parameter:

Press the [FUNCTION] button several times to select “System” menu, then use

the [ ]/[ ]/[<]/[>] buttons to select the desired parameter.

[>]

[<]

[>]

[<]

[>]

[<]

Description Default setting Setting range

Bluetooth* Bluetooth – Switches the Bluetooth function on/off (page 79). On On, Off

Pairing – For registering (pairing) the Bluetooth device (page 78).

This parameter is shown only when “Bluetooth” (above) is

set to “On.”

––

Tuning Master Tune (Pop-up

window)

Fine tunes the pitch of the entire instrument. This function

is useful when you play this instrument along with other

instruments or CD music.

NOTE

These settings will not be applied to the Drum Kit Voices or

Audio Song. Also, these settings will not be recorded to a

MIDI Song.

A3 = 440.0 Hz A3 = 414.8 Hz –

466.8 Hz (approx.

0.2 Hz steps)

Scale Tune (Setting

display)

Modern acoustic pianos are tuned almost exclusively in

equal temperament, which divides one octave into twelve

equal intervals. Likewise, this digital piano employs equal

temperament, but it can be changed at the touch of a

button to play in historical temperaments used in the 16th

to 19th centuries.

Equal

Temperament

Refer to the

“Scale Tune List”

(page 103)

Base Note (Setting

display)

Determines the base note for the Scale selected above.

When the base note is changed, the pitch of the

keyboard is transposed, yet maintains the original pitch

relationship between the notes. This setting is necessary

when Scale Tune is set to something other than “Equal

Temperament.”

NOTE

When Scale Tune is set to “Equal Temperament,” “---” is

shown on the display and this parameter cannot be edited.

C C, C , D, E , E, F,

F , G, A , A, B ,

Keyboard Touch (Setting

display)

Determines how the sound responds to your playing

strength. This setting does not change the weight of the

keyboard.

• Soft2: Produces relatively high volume even with light

playing strength. Best for players with a light touch.

• Soft1: Produces high volume with moderate playing

strength.

• Medium: Standard Touch Sensitivity.

• Hard1: Requires moderately strong playing for high

volume.

• Hard2: Requires strong playing to produce high

volume. Best for players with a heavy touch.

• Fixed: No touch response. The volume level will be the

same regardless of how hard you play the keys.

NOTE

The setting here will not be recorded to a MIDI Song and not

be transmitted as MIDI messages.

Medium Soft 2, Soft 1,

Medium, Hard 1,

Hard 2, Fixed

785 775

745 735

795GP

765GP

System Menu

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Keyboard Fixed Velocity (Pop-up

window)

Determines the velocity with which you play the keys

when Touch (above) is set to “Fixed.”

NOTE

The setting here will not be recorded to a MIDI Song and not

be transmitted as MIDI messages.

64 1 – 127

Duo (Setting

display)

Splits the keyboard into two ranges, allowing you to play

duets over the same octave range (page 38).

Off On, Off

Type – Selects the sound balance between the left and right

speakers while Duo is on.

• Separated: The sound of the left-hand range is output

from the left speaker(s), and the sound of the right-

hand range is output from the right speaker(s).

• Balanced: The sounds played by two players are

output through both speakers, with a natural balance of

sound.

Separated Separated,

Balanced

Split Point (Setting

display)

Determines the Split Point (the boundary between the

right-hand and left-hand keyboard areas).

F 2 (Split),

E3 (Duo)

A-1 – C7

Pedal Half Pedal Point (Pop-up

window)

Here you can specify the point to which you must

depress the right pedal before the assigned effect

begins to be applied. This setting applies only to the

“Sustain Continuously” effect (page 91) that is assigned

to the right pedal.

0 -2 (effective with

the shallowest

press) – 0 – +4

(effective with the

deepest press)

Soft Pedal

Depth

(Pop-up

window)

Determines how deeply the Soft pedal effect is applied.

This parameter is available only for the pedal to which

“Soft” (page 91) is assigned.

51 – 10

Pitch Bend

Range

(Pop-up

window)

Determines the range of the pitch bend that is produced

via the pedal in semitone steps. This setting is available

only for the pedal to which “Pitch Bend Up” or “Pitch

Bend Down” (page 91) is assigned.

NOTE

For some Voices, the pitch may not be changed according to

the Pitch Bend Range value set here.

2 0 – +12 (pressing

the pedal will

raise/lower the

pitch by 12

semitones

[1 octave])

Aux Polarity

(CLP-785/

795GP)

– A pedal connected to the [AUX PEDAL] jack may switch

on and off differently. For example, some pedals turn the

effects on and others turn them off when you press them.

Use this parameter to reverse this mechanism.

Make Make, Break

Aux Assign

(CLP-785/

795GP)

(Setting

display)

Assigns a function to the pedal connected to the [AUX

PEDAL] jack.

Expression Refer to the Pedal

Function List

(page 91).

Aux Area

(CLP-785/

795GP)

(Setting

display)

Determines the keyboard area to which the function of

the pedal connected to the [AUX PEDAL] jack is applied.

All All, Right, Left

Play/Pause (Setting

display)

Assigns the [PLAY/PAUSE] button’s function to one of the

Left pedal, Center pedal and pedal connected to the

[AUX PEDAL] jack (CLP-785/795GP). If a value other

than “Off” is selected here, the corresponding pedal's

function assigned in the “Voice” menu (page 89) is

disabled.

Off Off, Left, Center,

AUX (CLP-785/

795GP)

Sound Brilliance (Setting

display)

Adjusts the overall brilliance of sound for this instrument.

You can also select “User” to make your own custom EQ

settings. For details, refer to page 33.

Normal Mellow 1 – 3,

Normal,

Bright 1 – 3, User

IAC – Turns the IAC effect on or off. For details about IAC, refer

to page 21.

On On, Off

To call up the desired parameter:

Press the [FUNCTION] button several times to select “System” menu, then use

the [ ]/[ ]/[<]/[>] buttons to select the desired parameter.

[>]

[<]

[>]

[<]

[>]

[<]

Description Default setting Setting range

785 775

745 735

795GP

765GP

System Menu

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Sound IAC depth (Pop-up

window)

Determines the depth of the IAC. The higher the value,

the more clearly the low/high sounds at lower volume

levels.

0-3 – +3

Binaural – Turns the Binaural Sampling function (when headphones

are connected) on or off. When the function is on and

headphones are connected, the sound from this

instrument changes to the sound of Binaural Sampling or

the sound enhanced with the Stereophonic Optimizer,

allowing you to enjoy more realistic sound (page 22).

NOTE

When the “Speaker” setting (page 100) is on, this function will

always be disabled even when headphones are connected.

On On, Off

MIDI MIDI OUT (Setting

display)

Determines the MIDI channel on which the MIDI

messages generated via the keyboard performance will

be transmitted from the MIDI [OUT] or USB [TO HOST]

terminal. When Dual/Split/Duo is on, the MIDI channels

are assigned as follows.

• Performance via the R1 Voice = n (setting value)

• Performance via the R2 Voice = n+2

• Performance via the L Voice = n+1

Ch1 Ch1 – Ch16, Off

(not transmitted)

MIDI IN (Setting

display)

Determines which part of the instrument will be controlled

by each channel data of the MIDI messages coming from

the MIDI [IN] and USB [TO HOST] terminal.

• Song: Song part is controlled by the MIDI messages.

• Keyboard: The entire keyboard is controlled regardless

of the Dual/Split/Duo setting.

• R1: The keyboard performance via the R1 Voice is

controlled.

• L: The keyboard performance via the L Voice is

controlled.

• R2: The keyboard performance via the R2 Voice is

controlled.

• Off: No part is controlled.

“Song” for each of

all MIDI channels

For each MIDI

channel:

•Song

•Keyboard

•R1

•L

•R2

•Off

Local Control – “Local Control On” is a state in which this instrument

produces the sound from its tone generator when you

play the keyboard. In “Local Control Off” state, the

keyboard and the tone generator are cut off from each

other. This means that even if you play the keyboard, this

instrument will produce no sound. Instead, the keyboard

data can be transmitted via MIDI to a connected MIDI

device or computer, which can produce the sound. The

“Local Control Off” setting is useful when you wish to play

only an external sound source while playing the keys on

this instrument.

On On, Off

Receive Param. (Setting

display)

Determines which types of MIDI messages can be

received or recognized by this instrument.

MIDI message types:

Note on/off, Control Change, Program Change, Pitch

Bend, System Exclusive

On (for all the

MIDI messages)

On, Off (for each

MIDI message)

Transmit

Param.

(Setting

display)

Determines which types of MIDI messages can be

transmitted from this instrument.

MIDI message types:

Note on/off, Control Change, Program Change, Pitch

Bend, SystemRealTime, System Exclusive

On (for all the

messages)

On, Off (for each

message)

To call up the desired parameter:

Press the [FUNCTION] button several times to select “System” menu, then use

the [ ]/[ ]/[<]/[>] buttons to select the desired parameter.

[>]

[<]

[>]

[<]

[>]

[<]

Description Default setting Setting range

785 775

745 735

795GP

765GP

System Menu

100

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

MIDI Initial Setup Cancel Transmits the current panel settings such as Voice

selection to a connected MIDI device or computer.

Before you start recording your performance to a

connected MIDI device or computer, execute this

operation to record the current panel settings at the

beginning of your performance data. It causes that the

same panel settings are called up when the recorded

performance is played back.

Operation:

Move the highlight to “Execute,” then press the [>] button

to transmit the panel settings as MIDI messages.

––

Execute

Backup Backup Setting – For instructions about these functions, refer to pages 104

– 105.

––

Backup –

Restore –

Factory Reset –

Utility USB Format Cancel This lets you format or initialize the USB flash drive

connected to the USB [TO DEVICE] terminal.

NOTICE

Executing the Format operation will delete all data saved in the

USB flash drive. Save important data to a computer or another

storage device.

NOTE

When connecting the USB flash drive to the USB

[TO DEVICE] terminal, a message prompting you to execute

the Format operation may appear. If such a case occurs,

execute the Format operation.

Operation

Move the highlight to “Execute,” then press the [>] button

to start the Format operation. After Formatting is

completed, a message appears then the instrument

returns to the Utility display after a while.

NOTICE

Never turn off the power or disconnect the USB flash drive

while “Executing” is shown in the display.

––

Execute

USB Properties – Shows the amount of free space and entire memory in

the USB flash drive connected to the USB [TO DEVICE]

terminal.

––

USB Autoload – When this is set to “On,” the Song saved in the root

directory can be selected (shown on the display)

automatically as soon as the USB flash drive is

connected to the USB [TO DEVICE] terminal.

Off On, Off

Speaker (Setting

display)

Lets you switch the speaker on/off.

• Normal: The speaker will sound only if headphones are

not connected.

• On: The speaker will always sound.

• Off: The speaker will not sound.

NOTE

When this setting is on, “Binaural” (page 99) will always be

disabled.

Normal Normal, On, Off

To call up the desired parameter:

Press the [FUNCTION] button several times to select “System” menu, then use

the [ ]/[ ]/[<]/[>] buttons to select the desired parameter.

[>]

[<]

[>]

[<]

[>]

[<]

Description Default setting Setting range

785 775

745 735

795GP

765GP

Amount of

free space

Amount of

entire memory

System Menu

101

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Utility Contrast (Pop-up

window)

Adjusts the contrast of the display. 0 -5 – +5

Auto Power Off (Setting

display)

Lets you set the amount of time that elapses before the

power is turned off by Auto Power Off function (page 17).

To disable Auto Power Off, select “Off.”

Disabling Auto Power Off

30 (minutes) Off, 5, 10, 15, 30,

60, 120 (minutes)

Audio

Loopback

– Determines whether audio input from the connected

computer or smart device is output to a computer or a

smart device or not (page 76).

On On, Off

Version – Displays the model name and the firmware version of this

instrument.

––

Auto Backlight

Off

(CLP-785/775/

795GP)

(Setting

display)

Lets you set the time that elapses until the control panel

and the display turn off, or lets you set them to remain on

indefinitely (the “Off” setting).

10 (seconds) Off, 10, 20, 30, 60

(seconds)

Touch Panel

Sound

(CLP-785/775/

795GP)

– Determines whether a sound is made when the control

panel is operated (the “on” setting), or whether no sound

is heard (the “off” setting).

On On, Off

Language System Determines the type of characters shown on the display

for the System (general indication other than Song name)

and Song (Song name) individually.

Character list

International Japanese,

International

Song

To call up the desired parameter:

Press the [FUNCTION] button several times to select “System” menu, then use

the [ ]/[ ]/[<]/[>] buttons to select the desired parameter.

[>]

[<]

[>]

[<]

[>]

[<]

Description Default setting Setting range

785 775

745 735

795GP

765GP

Turn the power on while holding down the lowest key

on the keyboard. A message appears briefly and Auto

Power Off is disabled.

Japanese

International

System Menu

102

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

To call up the desired parameter:

Press the [FUNCTION] button several times to select “System” menu, then use

the [ ]/[ ]/[<]/[>] buttons to select the desired parameter.

[>]

[<]

[>]

[<]

[>]

[<]

[>]

[<]

[>]

[<]

Description

Default

setting

Setting range

Utility Wireless LAN

(In the

“Infrastructure”

mode)

Select

Network

(Networks) Connect to an access point by

selecting the network.

––

Other SSID Set the SSID. – Up to 32 characters (half

size), alphanumeric

characters, marks

Security Set the Security. None None, WEP,

WPA-PSK (TKIP),

WPA-PSK (AES),

WPA2-PSK (AES),

WPA/WPA2 mixed PSK

Password Set the Password. – Up to 64 characters (half

size), alphanumeric

characters, marks

Connect Connect using the settings in

“Other” display.

––

Detail DHCP Set the wireless LAN detailed

settings. IP Address, Subnet

Mask, Gateway, DNS Server1,

DNS Server2 can be set when

DHCP is set to Off while cannot

be set when DHCP set to On.

Use the [<]/[>] buttons to select

each octet in the entry display,

then enter the value using the

[

]/[ ] buttons. To finalize the

setting, press the [FUNCTION]

button.

On On/Off

IP Address 0.0.0.0 0.0.0.0-255.255.255.255

Subnet Mask 0.0.0.0 0.0.0.0-255.255.255.255

Gateway 0.0.0.0 0.0.0.0-255.255.255.255

DNS Server1 0.0.0.0 0.0.0.0-255.255.255.255

DNS Server2 0.0.0.0 0.0.0.0-255.255.255.255

Save Save the settings in the “Detail”

display. Move the highlight to

“Save,” then press the [>] button

to execute the Saving.

––

Wireless LAN

(In the

“Accesspoint”

mode)

SSID Set the SSID as an access point. ap-[CLP-****]-

[xxxxxx (MAC

address lower

6 figure)]

Up to 32 characters (half

size), alphanumeric

characters, marks

Security Set the Security as an access

point.

WPA2-PSK

(AES)

None, WEP, WPA-PSK

(TKIP), WPA-PSK (AES),

WPA2-PSK (AES),

WPA/WPA2 mixed PSK

Password Set the Password as an access

point.

00000000 Up to 64 characters (half

size), alphanumeric

characters, marks

Channel Set the channel as an access

point.

11 Differs depending on the

USB wireless LAN adaptor

models.

• Models for United States

and Canada: 1 – 11

• Others: 1 – 13

When no USB wireless

LAN adaptor is

connected, setting range

is channels 1 – 13.

785 775

745 735

795GP

765GP

System Menu

103

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

*1 The “Wireless LAN” and “Wireless LAN option” settings are shown only when you connect the USB wireless LAN adaptor UD-WL01 (sold

separately) to the USB [TO DEVICE] terminal on this instrument.

*2 Wireless LAN menus differ in the Wireless LAN Mode parameters between the two modes: “Infrastructure” and “Accesspoint.” The default

setting for the Wireless LAN Mode is “Infrastructure.”

 Scale Tune List (Temperament List)

Utility Wireless LAN

(In the

“Accesspoint”

mode)

DHCP Server Set the IP address related

settings.

On On, Off

IP Address 192.168.0.1 192. 168. 0-255. 1-254.

Subnet Mask 255.255.255.0 255.255.0.0,

255.255.128.0,

255.255.192.0,

255.255.224.0,

255.255.240.0,

255.255.248.0,

255.255.252.0,

255.255.254.0,

255.255.255.0

Save Save the settings you set in the

Wireless LAN display (in the

“Accesspoint” mode)

––

Wireless LAN

Option

Wireless LAN

Mode

Infrastructure Mode Determines whether the access

point is used for wireless LAN

connection (Infrastructure

Mode) or not (Accesspoint

Mode).

Infrastructure

Mode

–

Accesspoint Mode

Initialize Cancel Initialize the settings in the

wireless LAN display. Move the

highlight to “Execute,” then

press the [>] button to execute

the initialization.

Cancel –

Execute

Detail Host Name Set the Host name. [CLP-****]-

[xxxxxx (MAC

address lower

6 figure)]

Up to 57 characters (half

size) including

alphanumeric characters,

the “_” (underscore) and

“-” (hyphen) character.

Mac Address Display the MAC address of the

USB wireless LAN adaptor.

––

Status Display the error code of

network function.

––

Equal Temperament One octave is divided into twelve equal intervals. Currently most popular piano tuning scale.

PureMajor/PureMinor Based on natural overtones, three major chords using these scales produce a beautiful, pure sound.

Pythagorean This scale was devised by Pythagoras, the famous Greek philosopher and is created from a series of perfect fifths,

which are collapsed into a single octave. The 3rd in this tuning is slightly unstable, but the 4th and 5th are beautiful and

suitable for some leads.

MeanTone This scale was created as an improvement on the Pythagorean scale, by making the major third interval more “in tune.”

It was especially popular from the 16th century to the 18th century. Handel, among others, used this scale.

Werckmeister/

Kirnberger

These scales combine Mean Tone and Pythagorean in different ways. With these scales, modulation changes the

impression and feel of the Songs. They were often used in the era of Bach and Beethoven. They are also often used now

to reproduce the music of that era on harpsichords.

To call up the desired parameter:

Press the [FUNCTION] button several times to select “System” menu, then use

the [ ]/[ ]/[<]/[>] buttons to select the desired parameter.

[>]

[<]

[>]

[<]

[>]

[<]

[>]

[<]

[>]

[<]

Description

Default

setting

Setting range

785 775

745 735

795GP

765GP

104

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

System Menu

This lets you set whether some settings of the Backup

Setting (below) are maintained or not when the power

is turned off. The Backup Setting consists of two

groups, “Voice” (including Voice related settings such

as Voice selection) and “Other” (including various

settings such as Song Repeat and Tuning), which can

be set individually.

*For information on whether Bluetooth functionality is

included with the instrument or not, refer to page 142.

1. Press the [FUNCTION] button several times

to select the “System” menu (page 86).

2. Use the [ ]/[ ] buttons to select “Backup,”

use the [>] button to call up the next display,

then use the [

]/[ ] buttons to select

“Backup Setting.”

3. Use the [>] then the [ ]/[ ] buttons to select

“Voice,” then use the [>] button to select “On”

or “Off.”

Each “Voice” contains the following settings:

• Voice selection for R1, R2 and L

• All the parameters other than Transpose in the

“Voice” menu

4. Use the [ ]/[ ] buttons to select “Other,”

then use the [>] button to select “On” or

“Off.”

The “Other” contains the following settings:

• In the “Song” menu: Song Repeat, Volume (Song-

Keyboard), Audio Volume, Quick Play, Play Track

• In the “Metronome/Rhythm” menu: Volume, BPM,

Bell On/Off, Intro, Ending, Bass

• In the “System” menu: Tuning, Keyboard (except

“Duo” and “Duo Type”), Pedal, Sound, MIDI

5. Press the [EXIT] button to exit from the

“System” menu display.

This lets you save data on internal memory to the

connected USB flash drive as a backup file (named

“clp-***.bup”). This backup file can be loaded to the

instrument via the Restore function (page 105) for

future.

NOTICE

• It may take 1 – 2 minutes to complete this operation. Never turn

off the power during this operation (while “Executing” is shown).

Doing so could result in damage to the data.

• If the same backup file (clp-***.bup) is already saved in the USB

flash drive, this operation will overwrite or replace this file with

new one.

1. Connect the USB flash drive to the USB [TO

DEVICE] terminal.

2. Press the [FUNCTION] button several times

to select the “System” menu (page 86).

3. Use the [ ]/[ ] buttons to select “Backup,”

use the [>] button to call up the next display,

then use the [

]/[ ] buttons to select

“Backup.”

4. Use the [>] button to call up the next display,

then use the [

]/[ ] buttons to select

“Execute.”

5. Press the [>] button to execute the Backup

operation.

6. Press the [EXIT] button to exit from the

“System” menu display.

NOTE

When you want to restore the settings in the backup file, execute

the Restore function.

 Backup Setting

(Selecting parameters maintained even when the

power is turned off)

Data and settings maintained even when the

power is turned off

• User MIDI Song (saved in this instrument’s

“User” memory)

•System menu

Bluetooth* On/Off

Keyboard (Duo Type only)

Utility

•Backup Setting (explained here)

 Backup

(Saving the Backup file for internal data)

System Menu

105

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

This lets you load the backup file (clp-***.bup) saved

via the Backup function (page 104) to the instrument

on.

NOTICE

• It may take 1 – 2 minutes to complete this operation. Never turn

off the power during this operation (while “Executing” is shown).

Doing so could result in damage to the data.

• If recorded Songs reside on “User” memory, make sure to move

the Songs to the USB flash drive by following the instructions

page 68 before executing this operation. If you do not, the Songs

will be deleted via this operation.

1. Connect the USB flash drive containing the

Backup file to the USB [TO DEVICE]

terminal.

2. Press the [FUNCTION] button several times

to select the “System” menu (page 86).

3. Use the [ ]/[ ] buttons to select “Backup,”

use the [>] button to call up the next display,

then use the [

]/[ ] buttons to select

“Restore.”

4. Use the [>] button to call up the next display,

then use the [

]/[ ] button select “Execute.”

5. Press the [>] button to execute the Restore

operation.

A message indicating that the operation is

completed appears, then the instrument will restart

after a while.

This lets you reset this instrument to its factory

default settings which refers to the initial setting

preprogrammed when shipped from the factory, and

is called up when you first turn on the power to this

instrument.

Note that the following points.

• This operation resets the Backup Setting (page 104) to the

default setting.

• This operation will not delete the Songs saved in the User

folder.

• This operation will not delete the Bluetooth* pairing

information (page 78).

*For information on whether Bluetooth functionality is included

with the instrument or not, refer to page 142.

NOTICE

Never turn off the power during this operation (while “Factory reset

executing” is shown). Doing so could result in damage to the data.

1. Press the [FUNCTION] button several times

to select the “System” menu (page 86).

2. Use the [ ]/[ ] buttons to select “Backup,”

use the [>] button to call up the next display,

then use the [

]/[ ] buttons to select

“Factory Reset.”

3. Use the [>] button to call up the next display,

then use the [

]/[ ] buttons to select

“Execute.”

4. Press the [>] button to execute the Restore

operation.

A message indicating that the operation is

completed appears, then the instrument will restart

after a while.

 Alternate method for restoring the default

settings

Press and hold down the white key on the right end

(C7) and press the [] (Standby/On) switch to turn

on the power to this instrument. This operation will

not delete the Songs in the User folder.

 Restore

(Restarting the instrument with the Backup file

loaded)

 Factory Reset

(Restarting the instrument with the initial

factory settings loaded)

[] Standby/On switch

106

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Appendix

Preset Voice List

The preset Voices that are available differ among the models. The rows of the model names indicate if the model(s) have the corresponding preset Voices or

not.

Voice

Group

Voice Name

Stereo

Sampling

Touch

Sense

Key-off

Sampling

Voice description

CLP

-785/

-795GP

CLP

-775/

-745/

-735/

-765GP

Piano CFX Grand



Yamaha’s CFX concert grand piano sound with a wide dynamic range for maximum

expressive control. Suitable for playing in any music genre and style. When this Voice

is selected, connecting the headphones automatically enables binaural sampling

sound (page 22).



Bösendorfer



The famed sound of the Vienna-made Bösendorfer Imperial concert grand piano. Its

spacious sound evokes the size of the instrument, and is ideal for expressing

tenderness in compositions. When this Voice is selected, connecting the headphones

automatically enables binaural sampling sound (page 22).



Upright Piano



– The sound sampled from an upright piano, the Yamaha SU7. Enjoy the unique tonal

character and a lighter, more casual feel.



Studio Grand



The sound of Yamaha’s C7 grand piano, which is often used in recording studios. Its

bright and clear sound is good for popular styles.



–

Bright Grand



Bright piano sound. Good for clear expression and “cutting through” other

instruments in an ensemble.



Mellow Grand



Mellow piano sound. Good for quiet and slow music.



Ballad Grand



Grand piano sound with a soft and warm tone. Good for playing ballads.



–

Warm Grand





Warm and soft piano sound. Good for relaxing music.



Pop Grand



A slightly brighter piano sound. Good for popular styles.



Jazz Grand





A piano sound with unique tonal character. Good for jazz styles.



Rock Grand



A bright-sounding piano. Ideal for rock styles.



HonkyTonk Pf



– A honky-tonk style piano. Enjoy a tonal character that is quite different than a grand

piano.



Fortepiano Scarlatti Piano



The sound of a piano made by a musical instrument maker in Florence in the early

18th century. The maker is famous for inventing the piano. It is believed that Scarlatti

used the piano made by the maker. The sound is bright and brilliant.



–

Mozart Piano



– The sound of a piano made by a musical instrument maker in Vienna in the late 18th

century. Mozart and Beethoven played and highly appreciated the piano made by this

manufacturer. Its sound is clear and light.



Beethoven Piano



The sound of a piano made by a piano manufacturer in London in the early 19th

century. Haydn and Beethoven composed many masterpieces inspired by the pianos

of this manufacturer. It features a rich bass, sparkling highs and energetic fortissimo.



–

Chopin Piano



– The sound of a piano made by a piano manufacturer in Paris in the 19th century.

Chopin deeply loved the pianos of this manufacturer, which responded well to his

sensitive touch. It has a sound like a singing voice, sometimes luscious, sometimes

mournful.



E.Piano Stage E.Piano –



The sound of an electric piano using hammer-struck metallic “tines.” Soft tone when

played lightly, and an aggressive tone when played hard.



DX E.Piano –



– An electronic piano sound produced by an FM synthesizer. The tone will change as

you vary your playing touch. Ideal for popular music.



Vintage EP –



The sound of an electric piano using hammer-struck metal reeds. Widely used in rock

and popular music.



Soft EP –



An electric piano with a characteristic panning effect. Good for playing quiet ballads.



Phaser EP –



A distinctive phaser effect makes this ideal for fusion styles.



DX Bright –



– A variation of electronic piano sound produced by an FM synthesizer. Its bright and

sparkling sound character spice up the music.



Tremolo Vintage –



Includes tremolo ideal for Vintage EP. Frequently used in rock music.



Organ Organ GrandJeu



––A registration sound famous for use in French organ compositions. This dramatic

sound is ideal for ending a performance.



–

Organ Principal



––This Voice features the combination of pipes (8'+4'+2') of a principal (brass

instrument) organ. It is suitable for Baroque church music.



Organ Tutti



––This Voice features a full coupler of a pipe organ, famous for the sound used in

Toccata and Fugue by Bach.



Jazz Organ Slow –––The sound of a “tonewheel” type electric organ. Sampled with Rotary SP effect, its

rotation speed is slow. Often heard in jazz and rock idioms.



Preset Voice List

107

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Key-off Sampling

Samples of the very delicate noises that are produced when keys are released.

NOTE

• Grand Expression Modeling is effective only for the Voices of “CFX Grand” and “Bösendorfer.” For details about Grand Expression Modeling, refer to page 29.

• VRM is effective only for Voices in the Piano group. For details about VRM, refer to page 29.

Organ Jazz Organ Fast –––A same type of electric organ sound as Jazz Organ Slow. This was sampled with the

fast rotation speed of the rotary speaker effect. Switch Voices between Jazz Organ

Slow and Jazz Organ Fast to add variations to your performance.



Mellow Organ –––A mellow electric organ sound. Pressing and releasing the left pedal switches

between “fast” and “slow” of the Rotary Speaker speed.



Organ Flute 1



––A pipe organ sound that combines flute-type (woodwind type) stops of different

pitches (8' + 4'). This is a gentle sound that is ideal for accompanying hymns.



–

Organ Flute 2



––A pipe organ sound that combines flute-type (woodwind type) stops of different

pitches (8' + 4' + 1-1/3'). This is brighter than Organ Flute1, and is suitable for solos.



–

Strings Strings



– Stereo-sampled, large-scale strings ensemble with realistic reverb. Try combining

this Voice with piano in the Dual mode.



Slow Strings



– The sound of a string ensemble, with a slow attack. Suitable for use in Dual mode

with piano or electric piano.



Choir

CLP-785/

795GP: 

CLP-775/

745/735/

765GP: –



– A big, spacious choir Voice. Perfect for creating rich harmonies in slow pieces.



Slow Choir



– The sound of a choir with a slow attack. Suitable for use in Dual mode with piano or

electric piano.



Mellow Strings



– A mellow string ensemble. Enjoy a tonal character that is different from a Strings.



–

Dark Pad

–



– Warm and spacious synth sound. Ideal for sustained parts in the background of an

ensemble, or for use in Dual mode with piano or electric piano.



–

Lite Pad

–



–

Bright and spacious synth sound. Ideal for sustained parts in the background of an

ensemble, or for use in Dual mode with piano or electric piano.



–

Bell Pad



–

Synth sound with a crisp, bell-like sound. Ideal for layering in Dual mode with a piano

or electric piano sound, but also produces a bright, gorgeous sound on its own.



–

Synth Pad

–



–

A warm, mellow, and spacious synth sound. Ideal for sustained parts in the

background of an ensemble, or for use in Dual mode with piano or electric piano.

–



Bass Acoustic Bass

–



–

The sound of a finger-plucked upright bass. Frequently used in jazz and Latin music.



Bass & Cymbal

–



–

The sound of a cymbal has been layered onto the bass. Effective when used for jazz

walking-bass lines.



Electric Bass

–



–

The sound of an electric bass. Frequently used in jazz, rock, and popular music.



Fretless Bass

–



–

The sound of a fretless bass. Suitable for styles such as jazz and fusion.



Vintage Bass

–



–

A different type of electric bass with a rich sound.



–

Others Harpsichord 8'



–



The sound of the instrument frequently used in baroque music. Variations in playing

touch will not affect the volume, and a characteristic sound will be heard when you

release the key.



Harpsi. 8'+4'



–



A harpsichord with an added upper octave. Produces a more brilliant sound.



Harp

–



–

This sound was sampled from a grand harp. This sound, with a bright attack, is ideal

for playing gorgeous phrases.



–

Vibraphone



–

A Vibraphone sound, sampled in stereo. Its spacious and clear sound is ideal for

popular music. Pressing the left pedal switches Vibrato on and off.



Marimba



–

A marimba sound, sampled in stereo for spaciousness and realism.



–

Celesta



–

The sound of a celesta (a percussion instrument in which hammers strike metallic

bars to produce sound). This instrument is well-known for its appearance in “Dance

of the Sugar-plum Fairies” from Tchaikovsky’s “Nutcracker Suite.”



–

Nylon Guitar



–

Stereo-sampled, nylon-string guitar with natural reality. Suitable for any style of

musics.



Steel Guitar

–



–

A bright steel-string guitar sound. Ideal for popular music.



Scat

–



–

You can enjoy jazz “scatting” with this Voice. Depending on how hard and what note

range you play, different sounds will be produced.



–

XG –

–



–

For details on XG Voices, refer to the “Data List” on the website (page 8).



–

Voice

Group

Voice Name

Stereo

Sampling

Touch

Sense

Key-off

Sampling

Voice description

CLP

-785/

-795GP

CLP

-775/

-745/

-735/

-765GP

Preset Voice List

108

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Voice Demo Song List

The Demo Songs excluding original Songs are short rearranged excerpts from the original compositions. The original Demo Songs are Yamaha originals

CLP

-785/

-795GP

CLP

-775/

-745/

-735/

-765GP

Voice Name Title Composer

CFX Grand Allegro de concierto Cis dur E. Granados

Bösendorfer Widmung S.566 R.253 F. Liszt / R. Schumann

Upright Piano Sonatine F dur Anh.5(2) 1st mov. L. v. Beethoven

 – Studio Grand Original –

–  Bright Grand Original –

 – Scarlatti Piano Sonata G dur K.14 L.387 G. D. Scarlatti

Mozart Piano Sontata No.15 C dur K.545 1st mov. W. A. Mozart

 – Beethoven Piano Für Elise a moll L. v. Beethoven

Chopin Piano Nocturne op.27-2 Des dur F. F. Chopin

Stage E.Piano Original –

DX E.Piano Original –

Vintage EP Original –

 – Organ GrandJeu Original –

–  Organ Principal Herr Christ, der ein'ge Gottes-Sohn BWV 601 J. S. Bach

Organ Tutti Original –

Jazz Organ Slow Original –

Strings Original –

Choir Original –

 – Dark Pad Original –

–  Synth Pad Original –

Acoustic Bass Original –

Electric Bass Original –

Fretless Bass Original –

Harpsichord 8' Concerto a cembalo obbligato, 2 violini, viola e continuo No.7 g moll BWV 1058 1st mov. J. S. Bach

 – Harp Original –

Vibraphone Original –

Nylon Guitar Original –

 – XG Original –

109

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Song List

50 Classical Lesson Songs

No. Song Title Composer

Arrangements

1 Canon D dur J. Pachelbel

2 Air On the G String J. S. Bach

3 Jesus, Joy of Man’s Desiring J. S. Bach

4 Twinkle, Twinkle, Little Star Traditional

5 Piano Sonate op.31-2 “Tempest” 3rd mov. L. v. Beethoven

6 Ode to Joy L. v. Beethoven

7 Wiegenlied op.98-2 F. P. Schubert

8 Grande Valse Brillante F. F. Chopin

9 Polonaise op.53 “Héroïque” F. F. Chopin

10 La Campanella F. Liszt

11 Salut d’amour op.12 E. Elgar

12 From the New World A. Dvořák

13 Sicilienne G. U. Fauré

14 Clair de lune C. A. Debussy

15 Jupiter (The Planets) G. Holst

Duets

16 Menuett (Eine kleine Nachtmusik K.525) W. A. Mozart

17 Menuett G dur L. v. Beethoven

18 Marcia alla Turca L. v. Beethoven

19 Piano Concerto No.1 op.11 2nd mov. F. F. Chopin

20 The Nutcracker Medley P. I. Tchaikovsky

Original Compositions

21 Prelude (Wohltemperierte Klavier I No.1) J. S. Bach

22 Menuett G dur BWV Anh.114 J. S. Bach

23 Piano Sonate No.15 K.545 1st mov. W. A. Mozart

24 Turkish March W. A. Mozart

25 Piano Sonate op.13 “Pathétique” 2nd mov. L. v. Beethoven

26 Für Elise L. v. Beethoven

27 Piano Sonate op.27-2 “Mondschein” 1st mov. L. v. Beethoven

28 Impromptu op.90-2 F. P. Schubert

29 Frühlingslied op.62-6 J. L. F.

Mendelssohn

30 Fantaisie-Impromptu F. F. Chopin

31 Etude op.10-3 “Chanson de l’adieu” F. F. Chopin

32 Etude op.10-12 “Revolutionary” F. F. Chopin

33 Valse op.64-1 “Petit chien” F. F. Chopin

34 Nocturne op.9-2 F. F. Chopin

35 Nocturne KK4a-16/BI 49 [Posth.] F. F. Chopin

36 Träumerei R. Schumann

37 Barcarolle P. I. Tchaikovsky

38 La prière d’une Vierge T. Badarzewska

39 Liebesträume No.3 F. Liszt

40 Blumenlied G. Lange

41 Humoresque A. Dvořák

42 Arietta E. H. Grieg

43 Tango (España) I. Albéniz

44 The Entertainer S. Joplin

45 Maple Leaf Rag S. Joplin

46 La Fille aux Cheveux de Lin C. A. Debussy

47 Arabesque No.1 C. A. Debussy

48 Cakewalk C. A. Debussy

49 Je te veux E. Satie

50 Gymnopédies No.1 E. Satie

Album Title No. /Song Title Composer

Vorschule im

Klavierspiel op.101

1–106 F. Beyer

25 Etudes faciles et

progressives op.100

1 La candeur J. F.

Burgmüller

2 Arabesque

3Pastorale

4 Petite réunion

5 Innocence

6 Progrès

7 Courant limpide

8 La gracieuse

9 La chasse

10 Tendre fleur

11 La bergeronnette

12 Adieu

13 Consolation

14 La styrienne

15 Ballade

16 Douce plainte

17 Babillarde

18 Inquiétude

19 Ave Maria

20 Tarentelle

21 Harmonie des anges

22 Barcarolle

23 Retour

24 L'hirondelle

25 La chevaleresque

100 Übungsstücke

op.139

1–100 C. Czerny

30 Etudes de

mécanisme op.849

1–30 C. Czerny

The Virtuoso Pianist 1–20

1-Variation. 1–22

C-L. Hanon

About Duet Songs

The songs listed below are duet songs.

• Nos.16-20 of “50 Classical”

• Nos. 1–11 of the Vorschule im Klavierspiel op.101

of “Lesson Songs” as well as 32–34, 41–44, 63–64,

and 86–87

The right-hand part is for the right hand of the first

player, the left-hand part is for the left hand of the

first player, and Extra part is for the both hands of

the second player.

110

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Rhythm List

Category No. Name

Pops&Rock 1 8Beat

2 16Beat

3 Shuffle1

4 Shuffle2

5 Shuffle3

6 Gospel

7 8BeatBallad

8 6-8SlowRock

Jazz 9 FastJazz

10 SlowJazz

11 Swing

12 JazzWaltz

Latin 13 Samba

14 BossaNova

15 Rumba

16 Salsa

Kids&Holiday 17 KidsPop

18 6-8March

19 ChristmasSwing

20 Christmas3-4

111

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Message List

Some message display remains open. In this case, press the [EXIT] button to close message display.

Message Meaning

Access error The operation has failed. The following causes can be considered. If the following are not responsible, the

file may be damaged.

• The file operation is wrong. Follow the instructions in “Handling Song Files” (page 65) or “Backup”/

“Restore” (pages 104 – 105).

• The connected USB flash drive is not compatible with this instrument. For information on compatible USB

flash drive, see page 74.

Bluetooth pairing... The instrument is standing by for Bluetooth pairing. Refer to the instructions on page 78.

Cannot be executed The operation has failed. The following causes can be considered. Solve the causes, and try again.

• The file operation you attempted cannot be executed to Preset Songs or an Audio Song. For information

on the limitation of handling Song files, see page 65.

• The Song file operation cannot be made to an empty Song file (page 55) or NoSong.

NoSong: This is displayed when you select a folder which does not contain any Songs.

Change to Current Tempo This message indicates that you are applying the current tempo to the selected Song.

Change to Current Voice This message indicates that you are changing the Voice of the Song with the current Voice.

Completed This message indicates that the operation is completed. Go on to the next step.

Completed

Restart now

Restore is completed. The instrument is automatically turned on again.

Convert canceled This message appears when the convert operation is canceled.

Convert completed to USB/

USERFILES/

This message appears when the convert operation to the “USER FILES” folder on a USB flash drive is

completed.

Convert to Audio This message appears during the convert operation.

Copy completed to USB/

USERFILES/

This message appears when the copy operation to the “USER FILES” folder on a USB flash drive is

completed.

Copy completed to User This message appears when the copy operation to the “User” on this instrument is completed.

Device busy The operation, such as converting to the Audio Song or Audio Song playback/recording, has failed. This

message appears when you attempt to use a USB flash drive to which recording/deleting operations are

repeated. Execute the Format operation after making sure there is no important data in the USB flash drive

(page 100), and try again.

Device removed This message appears when the USB flash drive is removed from the instrument.

Duplicate name This message indicates that an identically named file already exists. Rename the file (page 70).

Executing The instrument is executing the operation. Wait until the message disappears, then go on to the next step.

Factory reset executing

Memory Song excluded

The default settings (except the Songs in the “User”) have been restored (page 105).

This message also appears if you press and hold down the C7 key and turn on the power to the instrument.

Factory reset Completed

Restart

Factory reset is completed. The instrument is then restarted.

Incompatible device This message appears when an incompatible USB flash drive is connected. Use a device whose

compatibility has been confirmed by Yamaha (page 74).

Internal hardware error A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized distributor.

Last power off invalid

Checking memory

This message appears when the power is turned on after turning off the power while handling a Song file

(page 65) or saving a backup file (page 104). The internal memory is being checked while this message

appears. If the internal settings are damaged, they will be reset to the default settings. If the Songs in the

“User” are damaged, they will be deleted.

Maximum no. of devices

exceeded

The number of devices exceed the limitation. Up to two USB devices can be connected simultaneously. For

details, see page 74.

Memory full Since the capacity and the number of files in the “User”/USB flash drive are full, the operation cannot be

completed. Delete some Songs in the “User”/USB flash drive or move Songs to another USB flash drive,

and try again.

Move completed to USB/

USERFILES/

This message appears when the move operation to the “USER FILES” folder on a USB flash drive is

completed.

Move completed to User This message appears when the move operation to “User” on the instrument is completed.

No device A USB flash drive was not connected to the instrument when you attempted to perform a device-related

operation. Connect the device, and try again.

Message List

112

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

No response

from USB device

The instrument cannot communicate with the connected USB device. Redo the connection (page 74). If

you still see this message, the USB device may be damaged.

Please wait The instrument is processing the data. Wait until the message disappears, then go on to the next step.

Protected device This message appears when you attempt a file operation (page 65), record your performance or save the

data on a read-only USB flash drive. Cancel the read-only setting, if possible, and try again. If you still see

this message, the USB flash drive is internally protected (such as commercially available music data). You

cannot make the file operation or record your performance to such a device.

Read-only file You attempted a file operation to a read-only file. Read-only files have handling limitations (page 65), and

cannot be used for editing (page 61). Use a read-only file after overriding the read-only setting.

Remaining space

on drive is low

Since the remaining space on the “User”/USB flash drive is low, delete any unnecessary files (page 67)

before recording.

Same file name exists This message appears to prompt you to confirm if overwriting or not when executing a Copy/Move/

MIDI to Audio operation.

Song error This message appears, if a problem is found with the Song data when you select a Song or while the Song

is playing. In this case, reselect the Song, and try again to play back. If the message still appears, the Song

data may have been damaged.

Song too large The size of Song data (MIDI/Audio) exceeds the limitation. The following causes can be considered.

• The Song size you attempt to play back exceeds the limitation. The limitation for playback is approx.

500KB (MIDI), 80 minutes (Audio).

• The Song size exceeds the limitation during recording. The limitation for recording is approx. 500KB

(MIDI), 80 minutes (Audio). The recording will end automatically and the recorded data before the end is

saved.

• The Song size exceeds the limitation during converting a MIDI Song to an Audio Song. The limitation is 80

minutes (Audio).

System limit This message appears when the number of files exceeds the system limit. The maximum number of files

and folders which can be saved in a folder is 250. Try again after deleting/moving the unnecessary file(s).

This data format is not

supported

This message appears when you attempted to load a Song of unsupported format to this instrument. Refer

to the page 43 about supported Song formats.

Unformatted device This message appears when you attempt to use an unformatted USB flash drive. Format it (page 100), and

try again.

Unsupported device This message appears when an unsupported USB flash drive is connected. Use a device whose

compatibility has been confirmed by Yamaha (page 74).

USB device

overcurrent error

Communication with the USB device has been cut off because of an abnormal power surge to the device.

Disconnect the USB device from the USB [TO DEVICE] terminal and turn the [] (Standby/On) switch of

the instrument standby and on again.

USB hub

hierarchical error

The USB hub is connected in two layers. USB hub use is limited to one layer.

USB power consumption

exceeded

bus-powered USB hub is usually recommended. When this message appears, however, use a self-powered

USB hub (with its own power source) and turn the power to on, or use a device whose compatibility

has been

confirmed by Yamaha (page 74).

Wrong device The file operation cannot be made to the connected USB flash drive. The following causes can be

considered.

• The USB flash drive in not formatted. Format it (page 100), and try again.

• The number of files exceeds the system limit. The maximum number of files and folders which can be

saved in a folder is 250. Try again after deleting/moving the unnecessary file(s).

Wrong name The Song name is not appropriate. This message appears during the “Renaming files” (page 70) operation

because of the following causes. Rename the Song correctly.

• No character has been input.

• You used a period or space at the beginning/ending of a Song name.

Message Meaning

113

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Troubleshooting

When a message is displayed, refer to the “Message List” (page 111) for troubleshooting aid.

Problem Possible Cause and Solution

The instrument does not turn

on.

The plugs are not properly connected. Make sure that the DC plug is securely inserted into the DC IN jack on the

instrument, and that the AC plug is securely inserted to the AC outlet (page 15).

A click or pop is heard when

the power is turned on or off.

This is normal when electrical current is being applied to the instrument.

The power is automatically

turned off.

This is normal and due to the Auto Power Off function. If necessary, set the parameter of the Auto Power Off

function (page 101).

The message “USB device

overcurrent error” is shown

and the USB device does not

respond.

Communication with the USB device has been shut down because of the over-current to the USB device.

Disconnect the device from the USB [TO DEVICE] terminal, then turn on the power of the instrument.

Noise is heard from the

speakers or headphones.

The noise may be due to interference caused by the use of a mobile phone in close proximity to the instrument.

Turn off the mobile phone, or use it further away from the instrument.

Noise is heard from the

instrument’s speakers or

headphones when using the

instrument with your smart

device, such as an iPhone/

iPad.

When you use the instrument along with your smart device, we recommend that you set that device’s “Airplane

Mode” to on and then the Wi-Fi/Bluetooth setting to on on your smart device, in order to avoid noise caused by

communication.

The overall volume is low, or

no sound is heard.

The Master Volume is set too low; set it to an appropriate level using the [MASTER VOLUME] slider (page 21).

The volume level for the keyboard performance is set too low. Adjust the volume balance to increase the

keyboard volume via the “Song” menu display: “Volume”  “Song - Keyboard” (page 52).

Headphones or adaptor plugs are connected when the Speaker setting is “Normal” (page 100). Disconnect the

headphone plugs and the adaptor plugs.

The Speaker setting is “Off.” Set the Speaker to “Normal” via the “System” menu display: “Utility”  “Speaker”

(page 100).

Local Control is “Off.” Set Local Control “On” via the “System” menu display: “MIDI”  “Local Control” (page 99).

The speakers do not switch

off when a pair of

headphones is connected to

the [PHONES] jack.

The Speaker setting is “On.” Set the speaker setting to “Normal” via the “System” menu display: “Utility” 

“Speaker” (page 100).

Pedals do not function. The pedal cord may not be securely connected to the [PEDAL] jack. Be sure to insert the pedal cord all the way

until the metal part of the cord plug disappears from view (pages 118, 121, 124 or 131).

(CLP-785, CLP-795GP)

The on/off setting of the pedal

connected to the AUX PEDAL

jack is reversed.

Some types of pedals may turn on and off in opposite fashion. Set to the appropriate parameter via the “System”

menu display: “Pedal”  “Aux Polarity” (page 98).

The keyboard volume is

lower than the Song playback

volume.

The volume level for the keyboard performance is set too low. Adjust the volume balance to increase the

keyboard volume via the “Song” menu display: “Volume”  “Song - Keyboard” (page 52).

The buttons do not respond. While you are using a function, some buttons not used for the function are disabled. If the Song is playing, stop

playback. Otherwise, press the [EXIT] button to return to the Voice or Song display, Then, perform the desired

operation.

Higher or lower notes do not

sound correctly when the

transpose or octave setting is

made.

This instrument can cover the range of C -2 – G8 when you set the transposition or octave. If notes lower than C

-2 are played, the sound is moved one octave higher. If notes higher than G8 are played, the sound is moved

one octave lower.

Performance in Dual/Split/

Duo mode is not recorded, or

part data is lost

unexpectedly.

Switching to Dual/Split/Duo mode in the middle of the Song is not recorded. Also, the recording part for the Voice

2 (Dual mode) or the left Voice (Split/Duo mode) is automatically assigned (page 57). If the assigned part

already has data, the data will be overwritten and deleted when you record.

Depending on the selected

Voice, the keyboard sound in

Duo mode may be output

from only one speaker.

This is because the default pan setting differs depending on the Voice.

Change the settings of “Duo-Type” (page 98) from “Separated” to “Balanced,” or change the “Pan” settings

(page 88).

Troubleshooting

114

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

*For information on whether Bluetooth functionality is included or not, refer to page 142.

The Song title is not correct. The “Language” setting may be different than that is selected when you named the Song. Also, if the Song was

recorded on another instrument, the title might be displayed incorrectly. Set the “Language” parameter

(page 101) via the “System” menu display: “Utility”  “Language”  “Song” to change the setting. However, if

the Song was recorded on another instrument, changing the “Language” parameter setting may not resolve the

problem.

Menu display cannot be

called up.

When Song is being played back, menu display other than “Voice” menu and “Song” menu will not appear. Stop

the Song by pressing the [PLAY/PAUSE] button. Also, in the recording ready mode, only “Recording” menu

display will appear.

Rhythm does not start. “SynchStart” setting is on. Set “SynchStart” off in the “Metronome/Rhythm” menu display.

Metronome, MIDI Song or

Rhythm goes out of tempo

slightly when you play the

keyboard.

This occurs infrequently when Grand Expression Modeling is set to “Dynamic.”

If this happens, set Grand Expression Modeling to “Static” (page 29).

The contents of the Wireless

LAN is not shown in the

display even though the USB

wireless LAN adaptor is

connected.

Disconnect the USB wireless LAN adaptor and connect it again.

The Bluetooth-equipped

smart device cannot be

paired with nor connected to

the instrument.

Check the Bluetooth function of the smart device is activated. To connect the smart device and the instrument

via Bluetooth, both devices need to be functional.

The smart device and the instrument need to be paired so that the instrument receives audio data from the smart

device via Bluetooth (page 78).

In case there is a device (microwave oven, wireless LAN device, etc.) that outputs signals in the 2.4 GHz

frequency band nearby, move this instrument away from the device that is emitting radio-frequency signals.

Problem Possible Cause and Solution

115

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Assembling the Clavinova

CAUTION

• Assemble the unit on a hard and flat floor with ample space.

• Be careful not to confuse parts, and be sure to install all

parts in the correct orientation. Please assemble the unit in

accordance with the sequence given below.

• (CLP-785, CLP-775, CLP-745, CLP-735) Assembly should be

carried out by at least two persons.

• (CLP-795GP, CLP-765GP) Assembly should be carried out

by at least four persons.

• Be sure to use only the included screws of the specified

sizes. Do not use any other screws. Use of incorrect screws

can cause damage or malfunction of the product.

• Be sure to tighten all screws upon completing assembly of

the unit.

• To disassemble the unit, reverse the assembly sequence

given below. Failure to do so can result in damage to the

instrument or personal injury.

Assembling the Clavinova

After completing the assembly, please

check the following.

• Are there any parts left over?

Review the assembly procedure and correct any errors.

• Is the instrument clear of doors and other

movable fixtures?

Move the instrument to an appropriate location.

• Does the instrument make a rattling noise

when you shake it?

Tighten all screws.

• Does the pedal box rattle or give way when you

step on the pedals?

Turn the adjuster so that it is set firmly against the floor.

• Are the pedal and power cords inserted

securely into the sockets?

Check the connection.

When Moving the Instrument

After Assembly

CAUTION

• When moving the instrument after assembly, always hold

the bottom of the main unit.

• Do not hold the key cover or top portion. Improper handling

can result in damage to the instrument or personal injury.

NOTICE

Rotate the adjuster under the pedal until it separates from the floor

surface. Contact with the adjuster can result in damage to the floor

surface.

Transporti ng

If you move to another location, refer to the “Transporting” on

page 133.

Assembly Precautions

Have a Phillips-head (+) screwdriver of the

appropriate size ready.

Reference page

CLP-785 page 116

CLP-775 page 120

CLP-745 page 123

CLP-735 page 123

CLP-795GP page 126

CLP-765GP page 130

CAUTION

If the unit creaks or is otherwise unsteady when you play on the

keyboard, refer to the assembly diagrams and retighten all screws.

785 775 745 735 795GP 765GP

Do not hold here.

Hold here.

Rotate the adjuster under the pedal

until it separates from the floor

surface.

785 775 745 735 795GP 765GP

Do not hold here.

Key cover

Top Position

Assembling the Clavinova

116

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Remove all parts from the package and make sure

you have all of the items.

The power cord and AC adaptor may not be included, or may look different

from the illustration above, depending on your particular area. Please check

with your Yamaha dealer.

1. Attach E and F to D.

1-1. Remove the twist tie from the folded pedal

cord.

Don’t discard the twist tie, you’ll need it later in

step 6.

1-2. While pushing the lower part of E and F

from the outside, secure D using four 6 ×

20 mm round head screws.

2. Attach B.

2-1. Insert B between E and F as shown in the

illustration.

CLP-785 Assembly

Foamed styrol pads

Remove foamed styrol pads from the package, position them on the

floor, then place A on top of them. Position the pads so that they will

not hide the connector panel on the bottom of A.

Connector

panel

Bundled pedal

cord inside

The pedals are covered with vinyl covers when

shipped from the factory. Before starting the

assembly, please make sure to remove the

cover from the damper pedal.

6 × 20 mm round head screws × 4

6 × 20 mm flat head screws × 6

4 × 14 mm round head screws × 10

Power cord

Cord holders × 2

4 × 10 mm thin screws × 2

Headphone hanger

AC adaptor

1-2

1-1

2-1

2-2

Proper way

to hold B

Assembling the Clavinova

117

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

2-2. Align and attach B to the front side of D, E

and F, then align the larger holes on

brackets of B to the screws on D.

2-3. Temporarily secure with six 4 × 14 mm

round head screws.

Insert six screws into the smaller holes on the

brackets.

3. Mount A.

Be sure to place your hands at least 15 cm away from

either end of the main unit when positioning it.

CAUTION

• Be extra careful not to drop the main unit or let your fingers

be pinched by it.

• Do not hold the main unit in any position other than the

position specified above.

4. Attach A.

4-1. Adjust the position of A so that the left and

right ends of A will project beyond E and F

equally (as seen from the rear).

4-2. Secure A using four 6 × 20 mm flat head

screws from the front.

4-3. Secure A using two 6 × 20 mm flat head

screws from the rear.

4-4. Firmly tighten the screws from the upper

parts you temporarily fastened in previous

step 2-3 above (assembly B).

2-3

Align the screw holes.

At least 15 cm

4-3

4-2

4-1

4-4

Assembling the Clavinova

118

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

5. Connect the speaker cord.

5-1. Remove the twist tie attaching the speaker

cord.

5-2. Insert the speaker cord plug into the

connector so that the tab extends toward

the front when viewed from the rear.

6. Connect the pedal cord and AC

adaptor.

6-1. Insert the pedal cord plug into the

[PEDAL] connector.

6-2. Attach the cord holders to the instrument,

then clip the cord into the holders. At this

time, be careful that the pedal cord isn’t

loose between the plug and cord holder.

6-3. Use a twist tie to bundle the pedal cord.

6-4. Connect one end of the power cord to the

AC adaptor.

6-5. Insert the DC plug of the AC adaptor into

the DC IN jack.

7. Attach C.

Insert the pedal cord securely

until the metal part of the

cord plug disappears from

view. Otherwise, the pedal

may not function properly.

6-3

6-2

6-1

6-5

7-1

Assembling the Clavinova

119

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

7-1. Attach the 4 × 14 mm round head screws to

the brackets on the upper side of E and F.

Make sure to leave a slight gap by not fully

tightening the screws.

7-2. Hook C with holes onto the screws attached

in step 7-1.

7-3. Secure the lower part of C using two 4 ×

14 mm round head screws.

7-4. Securely tighten the screws on the upper

part of C.

8. Set the adjuster.

Rotate the adjuster until it comes in firm contact

with the floor surface.

9. Attach the headphone hanger.

Use the two thin screws (4 × 10 mm) to attach the

hanger as shown in the illustration.

7-2

7-3

7-4

Assembling the Clavinova

120

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Remove all parts from the package and make sure

you have all of the items.

The power cord and AC adaptor may not be included, or may look different

from the illustration above, depending on your particular area. Please check

with your Yamaha dealer.

1. Attach C to D and E.

1-1. Untie and straighten out the bundled pedal

cord. Do not discard the vinyl tie. You will

need it later in step 5.

1-2. Insert the protrusions into the holes on the

brackets, then attach D and E to C by

tightening the four thick screws (6 × 20 mm).

2. Attach B.

Depending on the model of digital piano you

purchased, the surface color of one side of B may

be different from the other side. If so, position B

so that the side similar in color to D and E faces

the player.

2-1.

Align the screw holes on the upper side of B

with the bracket holes on D and E, then attach

the upper corners of B to D and E by finger-

tightening two thin screws (4 × 12 mm).

CLP-775 Assembly

Foamed styrol pads

Remove foamed styrol pads from the package, position them on the

floor, then place A on top of them. Position the pads so that they will

not block the speaker box on the bottom of A.

Bundled pedal

cord inside

The pedals are covered with vinyl covers

when shipped from the factory. Before

starting the assembly, please make sure to

remove the cover from the damper pedal.

6 × 20 mm thick screws × 10

4 × 12 mm thin screws × 2

4 × 20 mm tapping screws × 4

Power cord

Cord holders × 2

4 × 10 mm thin screws × 2

Headphone hanger

AC adaptor

1-2

1-1

1-2

2-1, 2-3

2-2

Assembling the Clavinova

121

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

2-2. Secure the bottom end of B using four

tapping screws (4 × 20 mm).

2-3. Securely tighten the screws on the top of B

that were attached in step 2-1.

3. Mount A.

Be sure to place your hands at least 15 cm away from

either end of the main unit when positioning it.

CAUTION

• Be extra careful not to drop the main unit or let your fingers

be pinched by it.

• Do not hold the main unit in any position other than the

position specified above.

4. Secure A.

4-1. Adjust the position of A so that the left and

right ends of A will project beyond D and E

equally (as seen from the front).

4-2. Secure A by tightening six thick screws (6 ×

20 mm) from the front.

5. Connect the pedal cord and AC

adaptor.

5-1. Insert the plug of the pedal cord into the

pedal connector.

5-2. Attach the cord holders to the rear panel as

shown, then clip the cord into the holders.

5-3. Use a vinyl tie to take up any slack in the

pedal cord.

5-4. Connect one end of the power cord to the

AC adaptor.

5-5. Insert the DC plug of the AC adaptor into

the DC IN jack.

Align the screw holes.

At least 15 cm

4-2

4-1

Insert the pedal cord securely

until the metal part of the

cord plug disappears from

view. Otherwise, the pedal

may not function properly.

5-15-1

5-3

5-5

5-2

PEDAL

Assembling the Clavinova

122

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

6. Set the adjuster.

Rotate the adjuster until it comes in firm contact

with the floor surface.

7. Attach the headphone hanger.

Use the two thin screws (4 × 10 mm) to attach the

hanger as shown in the illustration.

Assembling the Clavinova

123

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Remove all parts from the package and make sure

you have all of the items.

The power cord and AC adaptor may not be included, or may look different

from the illustration above, depending on your particular area. Please check

with your Yamaha dealer.

1. Attach C to D and E.

1-1. Untie and straighten out the bundled pedal

cord. Do not discard the vinyl tie. You will

need it later in step 5.

1-2. Insert the protrusions into the holes on the

brackets, then attach D and E to C by

tightening the four thick screws (6 × 20 mm).

2. Attach B.

Depending on the model of digital piano you

purchased, the surface color of one side of B may

be different from the other side. If so, position B

so that the side similar in color to D and E faces

the player.

CLP-745, CLP-735 Assembly

Foamed styrol pads

Remove foamed styrol pads from the package, position them on

the floor, then place A on top of them. Position the pads so that

they will not hide the connectors on the bottom of A.

Bundled pedal cord inside

6 × 20 mm thick screws × 10

4 × 12 mm thin screws × 2

4 × 20 mm tapping screws × 4

Power cord

Cord holders × 2

4 × 10 mm thin screws × 2

Headphone hanger

AC adaptor

1-2

1-1

2-1, 2-3

2-2

Assembling the Clavinova

124

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

2-1.

Align the screw holes on the upper side of B

with the bracket holes on D and E, then attach

the upper corners of B to D and E by finger-

tightening two thin screws (4 × 12 mm).

2-2. Secure the bottom end of B using four

tapping screws (4 × 20 mm).

2-3. Securely tighten the screws on the top of B

that were attached in step 2-1.

3. Mount A.

Be sure to place your hands at least 15 cm away from

either end of the main unit when positioning it.

CAUTION

• Be extra careful not to drop the main unit or let your fingers

be pinched by it.

• Do not hold the main unit in any position other than the

position specified above.

4. Secure A.

4-1. Adjust the position of A so that the left and

right ends of A will project beyond D and E

equally (as seen from the front).

4-2. Secure A by tightening six thick screws (6 ×

20 mm) from the front.

5. Connect the pedal cord and AC

adaptor.

At least 15 cm

Align the screw holes.

4-1

4-2

5-1

5-3

5-2

5-5

Assembling the Clavinova

125

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

5-1. Insert the plug of the pedal cord into the

pedal connector.

5-2. Attach the cord holders to the rear panel as

shown, then clip the cord into the holders.

5-3. Use a vinyl tie to take up any slack in the

pedal cord.

5-4. Connect one end of the power cord to the

AC adaptor.

5-5. Insert the DC plug of the AC adaptor

into the DC IN jack.

6. Set the adjuster.

Rotate the adjuster until it comes in firm contact

with the floor surface.

7. Attach the headphone hanger.

Use the two thin screws (4 × 10 mm) to attach the

hanger as shown in the illustration.

Insert the pedal cord

securely until the metal part

of the cord plug disappears

from view. Otherwise, the

pedal may not function properly.

PEDAL

Assembling the Clavinova

126

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Remove all parts from the package and make sure

you have all of the items.

1. Lean the main unit against the wall

as shown below.

CAUTION

Be careful not to pinch your fingers.

1-1. Spread a large soft cloth, such as a blanket,

as shown to protect the floor and wall

surfaces.

1-2. Lean the main unit against the wall with

the key cover closed and the keyboard side

on the bottom.

CLP-795GP Assembly

Pedal box

Pads

Cord holder

Power cord

Main unit

To prevent damage to the connector panels located at the bottom of main

unit, make sure to place main unit on the Styrofoam pads. Also, make sure

that the pads do not touch the connector panels.

Bundled pedal cord inside.

The pedals are covered with

vinyl covers when shipped from

the factory. Remove the cover

from damper pedal for optimum

use of the GP Responsive

Damper Pedal effect.

Legs

Leg beams

Lyre braces

Headphone hanger

4 × 10 mm thin screws

(2 pcs.)

6 × 20 mm fixing screws

(4 pcs.)

6 × 40 mm fixing screws

(12 pcs.)

4 × 16 mm thin screws

(4 pcs.)

4 × 10 mm thin screws

(12 pcs.)

Connector panel Connector panel

AC adaptor

4 × 10 mm thin screws

(4 pcs.)

Adaptor holders

Incorrect

NOTICE

Do not place the main unit as shown in the illustration here.

Incorrect

The power cord and AC adaptor may not be included, or may look different

from the illustration above, depending on your particular area. Please check

with your Yamaha dealer.

Assembling the Clavinova

127

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

2. Attach the three legs and three leg

beams.

Refer to the diagram below to verify the

orientation of the legs.

2-1. Install and tighten four screws on each leg,

starting with one of the front legs.

2-2. Slide the leg beams over the legs, and attach

them to each of the legs using four thin

screws (4 × 10 mm).

Make sure that the gradually inclined side of the

leg beams faces the inside of the unit as shown.

3. Attach the lyre braces.

3-1. Attach the lyre braces using the four thin

screws (4 × 16 mm).

4. Raise the unit to the standing

position.

Use the front legs as support to raise the unit.

Rear leg

Front leg

6 × 40 mm fixing screws

4 × 10 mm

thin screws

The gradually

inclined side

faces the inside.

3-1

4 × 16 mm

thin screws

Assembling the Clavinova

128

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

5. Install the pedal box.

5-1. Remove the twist tie and tape that affix the

pedal cord to the upper portion of the

pedal box.

5-2. Attach the front side of the pedal box to the

bottom of the unit by finger-tightening the

two fixing screws (6 × 20 mm).

5-3. Insert the lyre braces into the pedal box

recesses and make sure they fit securely.

5-4. Align the cord with the groove on the unit

and attach the backside of the pedal box

using the two fixing screws (6 × 20 mm),

and then securely tighten the two screws of

the front side of the pedal box that were

attached in step 5-2.

5-5. Loosen the four screws that were attached

in step 3, and then securely tighten the four

screws again while pushing the lyre braces

in the direction of arrows as illustrated.

Tape

Twist tie

6 × 20 mm

fixing screws

6 × 20 mm fixing screws

Assembling the Clavinova

129

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

5-6. Insert the pedal cord plug into the pedal

connector. Insert the plug so the arrow side

faces front (toward the keyboard).

If the plug will not go in easily, do not force it.

Double-check the orientation of the plug, then try

again.

5-7. Attach the cord holder to the bottom of the

main unit as shown, then clip the holder

around the cord.

6. Connect the AC adaptor.

6-1. Connect one end of the power cord to the

AC adaptor.

6-2. Insert the DC plug of the AC adaptor into

the DC IN jack.

7. Rotate the adjuster until it comes in

firm contact with the floor surface.

8. Attach the headphone hanger.

Attach the headphone hanger using two thin

screws (4 × 10 mm) as shown in the illustration.

5-6

5-7

Insert the pedal

cord securely

until the metal

part of the cord

plug disappears

from view.

Otherwise, the

pedal may not

function

properly.

4 × 10 mm thin screws

Assembling the Clavinova

130

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

9. If desired, you can attach the AC

adaptor to the bottom of the unit by

using the adaptor holders.

For specific instructions, refer to the leaflet

enclosed with the adaptor holders.

CAUTION

To disassemble the unit, reverse the assembly sequence.

Failure to do so can result in damage to the instrument or

personal injury. In particular, if you lay down the main unit

without detaching the pedal box, the pedals will break.

Remove all parts from the package and make sure

you have all of the items.

AC adaptor

4 × 10 mm

thin screws

CLP-765GP Assembly

Legs Pedal box

6 × 40 mm fixing screws × 12

Cord holder

6 × 20 mm fixing screws × 4

Power cord

Bundled pedal cord inside.

The pedals are covered with

vinyl covers when shipped from

the factory. Before starting the

assembly, please make sure to

remove the cover from the

damper pedal.

Connector panel

Main unit

To prevent damage to the connector panels located at the bottom of main

unit, make sure to place main unit on the Styrofoam pads. Also, make sure

that the pads do not touch the connector panels.

Headphone hanger

4 × 10 mm thin screws × 2

AC adaptor

4 × 10 mm thin screws × 4

Adaptor holders

Pads

The power cord and AC adaptor may not be included, or may look different

from the illustration above, depending on your particular area. Please check

with your Yamaha dealer.

Assembling the Clavinova

131

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

1. Lean the unit against the wall as

shown below.

CAUTION

Be careful not to pinch your fingers.

1-1. Spread a large soft cloth, such as a blanket,

as shown to protect the floor and wall

surfaces.

1-2. Lean the main unit against the wall with

the key cover closed and the keyboard side

on the bottom.

2. Attach two front legs and a rear leg.

Refer to the diagram below to verify the

orientation of the legs.

2-1. Install and tighten four screws on each leg,

starting with one of the front legs.

3. Install the pedal box.

3-1. Remove the twist tie that affixes the pedal

cord to the upper portion of the pedal box.

Be sure to position the

keyboard side on the bottom.

Incorrect

NOTICE

Do not place the main unit as shown in the illustration here.

Incorrect

Rear leg

Front leg Front leg

6 × 40 mm fixing screws

Twist tieTape

Assembling the Clavinova

132

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

3-2. Align the cord with the groove on the unit,

and attach the pedal box using four screws.

3-3. Insert the pedal cord plug into the pedal

connector. Insert the plug so the arrow side

faces front (toward the keyboard). If the

plug will not go in easily, do not force it.

Double-check the orientation of the plug,

then try again.

Insert the pedal cord securely until the metal part

of the cord plug disappears from view. Otherwise,

the pedal may not function properly.

3-4. Attach the cord holder to the bottom of the

main unit as shown, then clip the holder

around the cord.

4. Raise the unit to the standing

position.

Use the front legs as support to raise the unit.

CAUTION

Be careful not to pinch your fingers. When you raise the unit,

do not hold the key cover.

5. Connect the AC adaptor.

5-1. Connect one end of the power cord to the

AC adaptor.

5-2. Insert the DC plug of the AC adaptor into

the DC IN jack.

6 × 20 mm fixing screws

3-3

3-4

Assembling the Clavinova

133

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

6. Rotate the adjuster until it comes in

firm contact with the floor surface.

7. Attach the headphone hanger.

Attach the headphone hanger using two thin

screws (4 x10 mm) as shown in the illustration.

8. If desired, you can attach the AC

adaptor to the bottom of the unit by

using the adaptor holders.

For specific instructions, refer to the leaflet

enclosed with the adaptor holders.

4 × 10 mm thin screws

Tran sp or ting

If you move to another location, you can transport

the instrument along with other belongings. You can

move the unit as it is (assembled) or you can

disassemble the unit down to the condition it was in

when you first took it out of the box. Transport the

keyboard horizontally. Do not lean it up against a

wall or stand it up on its side. Do not subject the

instrument to excessive vibration or shock. When

transporting the assembled instrument, make sure all

screws are properly tightened and have not been

loosened by moving the instrument.

AC adaptor

4 × 10 mm

thin screws

134

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Specifications

Specifications (CLP-785, CLP-775, CLP-745, CLP-735)

Refer to page 137 for specifications of the CLP-795GP and CLP-765GP.

Items CLP-785 CLP-775 CLP-745 CLP-735

Product Name

Digital Piano

Size/Weight

Width

[For models with polished finish]

1461 mm (57-1/2")

[1467 mm (57-3/4")]

1461 mm (57-1/2")

[1466 mm (57-11/16")]

Height

[For models with

polished finish]

With music rest closed

1027 mm (40-7/16")

[1029 mm (40-1/2")]

967 mm (38-1/16")

[970 mm (38-3/16")]

927 mm (36-1/2")

[930 mm (36-5/8")]

With music rest raised

1136 mm (44-3/4")

[1137 mm (44-3/4")]

1096 mm (43-1/8")

[1097 mm (43-3/16")]

1081 mm (42-9/16")

[1082 mm (42-5/8")]

Depth

[For models with polished finish]

476 mm (18-3/4")

[477 mm (18-3/4")]

465 mm (18-5/16")

[465 mm (18-5/16")]

459 mm (18-1/16")

[459 mm (18-1/16")]

Weight

[For models with polished finish]

84 kg (185 lb, 3 oz)

[87 kg (191 lb, 13 oz)]

71 kg (156 lb, 8 oz)

[74 kg (163 lb, 2 oz)]

60 kg (132 lb, 4 oz)

[63 kg (138 lb, 14 oz)]

57 kg (125 lb, 11 oz)

[60 kg (132 lb, 4 oz)]

Control

Interface

Keyboard Number of Keys

Type

GrandTouch Keyboard: wooden keys (white

only), synthetic ebony and ivory key tops,

escapement

GrandTouch-S

Keyboard: wooden

keys (white only),

synthetic ebony and

ivory key tops,

escapement

GrandTouch-S

Keyboard: synthetic

ebony and ivory key

tops, escapement

88-key Linear Graded

Hammers

Yes —

Counter weight

Yes —

Touch Response

Hard2/Hard1/Medium/Soft1/Soft2/Fixed

Pedal Number of Pedals

3: Damper (with Half-pedal function), Sostenuto, Soft

Assignable Functions

Sustain (Switch), Sustain Continuously, Sostenuto, Soft, Pitch Bend Up, Pitch Bend Down,

Rotary Speed, Vibe Rotor, Song Play/Pause

GP Response Damper

Pedal

Yes —

Display Type

Full Dots LCD

Size

128 × 64 dots

Language

English, Japanese

Panel Type

Touch sensors Buttons

Language

English

Cabinet

Key Cover Style

Folding Sliding

Music Rest

Yes

Music Braces

Yes

Voices

Tone Generation Piano Sound

Yamaha CFX, Bösendorfer Imperial

Binaural Sampling

Yes (“CFX Grand” and “Bösendorfer” only)

Piano Effects VRM

Yes

Grand Expression

Modeling

Yes

Key-off Samples

Yes

Smooth Release

Yes

Polyphony (max.)

256

Preset Number of Voices

53 Voices +

14 Drum/SFX Kits +

480 XG Voices

38 Voices

Compatibility

XG (GM), GS (for

Song playback), GM2

(for Song playback)

—

Effects

Types Reverb

6 types

Chorus

3 types

Brilliance

7 types + User

Effect

12 types

Specifications

135

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Effects

Types Intelligent Acoustic

Control (IAC)

Yes

Stereophonic Optimizer

Yes

Functions Dual

Yes

Split

Yes

Duo

Yes

Songs (MIDI)

Preset Number of

Preset Songs

25 Voice Demo

Songs + 50 Classics

+ 303 Lesson Songs

21 Voice Demo Songs + 50 Classics + 303 Lesson Songs

Recording Number of Songs

250

Number of Tracks

Data Capacity

Approx. 500 KB/Song

Playback Data Capacity

Approx. 500 KB/Song

Format Playback

SMF (Format 0, Format 1)

Recording

SMF (Format 0)

Songs (Audio)

Recording Time (max.)

80 minutes/Song

Format Playback

.wav (44.1 kHz sample rate, 16-bit resolution, stereo)

Recording

.wav (44.1 kHz sample rate, 16-bit resolution, stereo)

Functions

Rhythms Number of Rhythms

Overall Controls Metronome

Yes

Tempo Range

5 – 500

Transpose

-12 – 0 – +12

Tuning

414.8 – 440.0 – 466.8 Hz (approx. 0.2 Hz increments)

Scale Type

7 types

USB audio interface

44.1 kHz, 24 bit, stereo

Miscellaneous Piano Room

Yes

Bluetooth

(May not have

this functionality

depending on

the country in

which you

purchased the

product.)

Audio Supported profile

A2DP —

Compatible codec

SBC —

MIDI

Comply with Bluetooth Low Energy MIDI Specification —

Bluetooth version

4.2 —

Wireless output

Bluetooth Class 2 —

Maximum communication distance

Approx. 10 m —

Radio Frequency (Operational Frequency)

2402 – 2480 MHz —

Maximum output power (EIRP)

4 dBm —

Type of modulation

FHSS —

Storage and

Connectivity

Storage Internal Memory

Total maximum size approx. 1.4 MB

External Drives

USB flash drive

Connectivity DC IN

24 V 16 V

Headphones

Standard stereo phone jack (× 2)

MIDI

[IN] [OUT] [THRU]

AUX IN

Stereo Mini

AUX OUT

[L/L+R] [R]

AUX PEDAL

Yes —

USB TO DEVICE

Yes

USB TO HOST

Yes

Sound System

Amplifiers

(50 W + 50 W + 50 W)

× 2

(42 W + 50 W + 50 W)

× 2

(50 W + 50 W) × 2 30 W × 2

Speakers

(16 cm + 8 cm + 2.5

cm (dome) +

transducer) × 2,

Spruce Cone

Speaker

(16 cm + 8 cm + 5 cm

+ transducer) × 2

(16 cm + 8 cm) × 2 16 cm × 2

Items CLP-785 CLP-775 CLP-745 CLP-735

Specifications

136

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

*The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download

the manual file. Since specifications, equipment or separately sold accessories may not be the same in every locale, please check with your Yamaha dealer.

Power Supply

AC Adaptor

PA-500 PA-300C

Power Consumption

60 W

(When using

PA-500 AC adaptor)

50 W

(When using

PA-500 AC adaptor)

40 W

(When using

PA-500 AC adaptor)

18 W

(When using

PA-300C AC adaptor)

Auto Power Off

Yes

Included Accessories

• Owner’s Manual

• Warranty*

• “50 Classical Music Masterpieces” Music Book

• Online Member Product Registration

• Bench*

• (CLP-785, CLP-775, CLP-745) Power cord*/AC adaptor* PA-500

• (CLP-735) Power cord*/AC adaptor* PA-300C

*May not be included depending on your area. Check with your Yamaha dealer.

Separately Sold Accessories

(May not be available depending on your area.)

• Headphones HPH-150, HPH-100, HPH-50

• (CLP-785) Footswitches FC4A, FC5

• (CLP-785) Foot controller FC7

• (CLP-785, CLP-775, CLP-745) AC adaptor PA-500

• (CLP-735) AC adaptor PA-300C

• USB Wireless LAN Adaptor UD-WL01

• Wireless MIDI Adaptor MD-BT01, UD-BT01

Items CLP-785 CLP-775 CLP-745 CLP-735

Specifications

137

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Specifications (CLP-795GP, CLP-765GP)

Refer to page 134 for specifications of the CLP-785, CLP-775, CLP-745 and CLP-735.

Items CLP-795GP CLP-765GP

Product Name

Digital Piano

Size/Weight

Width

1430 mm (56-5/16")

Height With music rest closed

932 mm (36-11/16")

With music rest raised

1103 mm (43-7/16")

Height with lid up

1577 mm (62-1/16") 1400 mm (55-1/8")

Depth

1237 mm (48-11/16") 1147 mm (45-3/16")

Weight

126 kg (277 lb, 13 oz) 106 kg (233 lb, 11 oz)

Control

Interface

Keyboard Number of Keys

Type

GrandTouch Keyboard: wooden keys (white

only), synthetic ebony and ivory key tops,

escapement

GrandTouch-S Keyboard: synthetic ebony

and ivory key tops, escapement

88-key Linear Graded

Hammers

Yes —

Counter weight

Yes —

Touch Response

Hard2/Hard1/Medium/Soft1/Soft2/Fixed

Pedal Number of Pedals

3: Damper (with Half-pedal function), Sostenuto, Soft

Assignable Functions

Sustain (Switch), Sustain Continuously, Sostenute, Soft, Pitch Bend Up, Pitch Bend Down,

Rotary Speed, Vibe Rotor, Song Play/Pause

GP Response Damper

Pedal

Yes —

Display Type

Full Dots LCD

Size

128 × 64 dots

Language

English, Japanese

Panel Type

Touch sensors Buttons

Language

English

Cabinet

Key Cover Style

Sliding

Music Rest

Yes

Music Braces

Yes

Voices

Tone Generation Piano Sound

Yamaha CFX, Bösendorfer Imperial

Binaural Sampling

Yes (“CFX Grand” and “Bösendorfer” only)

Piano Effect VRM

Yes

Grand Expression

Modeling

Yes

Key-off Samples

Yes

Smooth Release

Yes

Polyphony (max.)

256

Preset Number of Voices

53 Voices + 14 Drum/SFX Kits

+ 480 XG Voices

38 Voices

Compatibility

XG (GM), GS (for Song playback),

GM2 (for Song playback)

—

Effects

Types Reverb

6 types

Chorus

3 types

Brilliance

7 types + User

Effect

12 types

Intelligent Acoustic

Control (IAC)

Yes

Stereophonic Optimizer

Yes

Functions Dual

Yes

Split

Yes

Duo

Yes

Specifications

138

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Songs (MIDI)

Preset Number of

Preset Songs

25 Voice Demo Songs + 50 Classics

+ 303 Lesson Songs

21 Voice Demo Songs + 50 Classics

+ 303 Lesson Songs

Recording Number of Songs

250

Number of Tracks

Data Capacity

Approx. 500 KB/Song

Playback Data Capacity

Approx. 500 KB/Song

Format Playback

SMF (Format 0, Format 1)

Recording

SMF (Format 0)

Songs (Audio)

Recording Time (max.)

80 minutes/Song

Format Playback

.wav (44.1 kHz sample rate, 16-bit resolution, stereo)

Recording

.wav (44.1 kHz sample rate, 16-bit resolution, stereo)

Functions

Rhythms Number of Rhythms

Overall Controls Metronome

Yes

Tempo Range

5 – 500

Transpose

-12 – 0 – +12

Tuning

414.8 – 440.0 – 466.8 Hz (approx. 0.2 Hz increments)

Scale Type

7 types

USB audio interface

44.1 kHz, 24 bit, stereo

Miscellaneous Piano Room

Yes

Bluetooth

(May not have

this functionality

depending on

the country in

which you

purchased the

product.)

Audio Supported profile

A2DP

Compatible codec

SBC

MIDI

Comply with Bluetooth Low Energy MIDI Specification

Bluetooth version

4.2

Wireless output

Bluetooth Class 2

Maximum communication distance

Approx. 10 m

Radio Frequency (Operational Frequency)

2402 – 2480 MHz

Maximum output power (EIRP)

4 dBm

Type of modulation

FHSS

Storage and

Connectivity

Storage Internal Memory

Total maximum size approx. 1.4 MB

External Drives

USB flash drive

Connectivity DC IN

24 V

Headphones

Standard stereo phone jack (× 2)

MIDI

[IN] [OUT] [THRU]

AUX IN

Stereo Mini

AUX OUT

[L/L+R] [R]

AUX PEDAL

Yes —

USB TO DEVICE

Yes

USB TO HOST

Yes

Sound System

Amplifiers

(50 W + 50 W + 50 W) × 2 (50 W + 42 W) × 2

Speakers

(16 cm + 8 cm + 2.5 cm (dome) + transducer)

× 2, Spruce Cone Speaker

(16 cm + 5 cm) × 2

Power Supply

AC Adaptor

PA-500

Power Consumption

60 W

(When using PA-500 AC adaptor)

30 W

(When using PA-500 AC adaptor)

Auto Power Off

Yes

Included Accessories

• Owner’s Manual

• Warranty*

• “50 Classical Music Masterpieces” Music Book

• Online Member Product Registration

• Bench*

• Power cord*/AC adaptor* PA-500

*May not be included depending on your area. Check with your Yamaha dealer.

Items CLP-795GP CLP-765GP

Specifications

139

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

*The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download

the manual file. Since specifications, equipment or separately sold accessories may not be the same in every locale, please check with your Yamaha dealer.

Separately Sold Accessories

(May not be available depending on your area.)

• Headphones HPH-150, HPH-100, HPH-50

• (CLP-795GP) Footswitches FC4A, FC5

• (CLP-795GP) Foot controller FC7

• AC adaptor PA-500

• USB Wireless LAN Adaptor UD-WL01

• Wireless MIDI Adaptor MD-BT01, UD-BT01

Items CLP-795GP CLP-765GP

140

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Index

Numerics

50 Classical ............................................................... 44, 109

AB Repeat ..........................................................................50

AC adaptor ........................................................................15

Accesspoint Mode ................................................... 84, 103

Assembly .........................................................................115

Audio Loopback ...................................................... 76, 101

Audio Recording ..............................................................54

Audio Song ........................................................................43

Auto Backlight Off .........................................................101

Auto Power Off ....................................................... 17, 101

Aux Assign ........................................................................98

Backup .............................................................................104

Backup Setting ................................................................104

Bass .....................................................................................95

Bell ......................................................................................95

Binaural Sampling ............................................................22

Bluetooth ......................................................78, 80, 97, 142

Body Resonance (Res.) ....................................................28

Brightness ..........................................................................28

Brilliance ............................................................................33

Chorus ...............................................................................34

Chorus Type List ..............................................................90

Computer ..........................................................................76

Computer-related Operations ..........................................8

Connectors ........................................................................71

Contrast ...........................................................................101

Convert ..............................................................................69

Copy ...................................................................................68

Damper Noise ............................................................ 28, 29

Damper pedal ...................................................................23

Damper Resonance (Res.) ...............................................28

Data List ..............................................................................8

Delete .................................................................................67

Demo .................................................................................32

Detailed Settings ...............................................................86

Dual ....................................................................................35

Dual/Split ..........................................................................37

Duo .....................................................................................38

Duplex Scale ......................................................................29

Duplex Scale Resonance (Res.) .......................................28

Edit (Song) ........................................................................93

Edit (Voice) .......................................................................88

Effect ..................................................................................34

Effect Depth ......................................................................88

Effect Type List .................................................................90

Ending ...............................................................................42

EQ ......................................................................................34

Factory Reset ...................................................................105

Fast forward ......................................................................46

File Operation ...................................................................65

Format (Song) ..................................................................43

Format (USB flash drive) ..............................................100

GP Response Damper Pedal ...........................................23

Grand Expression ............................................................29

Grand Expression Modeling ..........................................29

Half Pedal Point .........................................................29, 98

Half-pedal .........................................................................23

Headphones ......................................................................21

Infrastructure Mode ......................................................103

Initial Setup .....................................................................100

Intelligent Acoustic Control (IAC) ...............................21

Intro ...................................................................................42

Key cover .....................................................................15, 17

Language .........................................................................101

Lesson ....................................................................... 44, 109

Lid ......................................................................................20

Lid Position .......................................................................28

Local Control ....................................................................99

Master Tune ......................................................................28

MASTER VOLUME ........................................................21

Message List ....................................................................111

Metronome .......................................................................39

Metronome/Rhythm menu ............................................95

MIDI ..................................................................................99

141

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

Index

MIDI Recording ...............................................................54

MIDI Reference ..................................................................8

MIDI Song ........................................................................43

MIDI to Audio ..................................................................69

Move ..................................................................................68

Music Rest .........................................................................18

Network .............................................................................81

Octave ................................................................................88

Paring .................................................................................78

Part Cancel ........................................................................48

Pedal ............................................................................ 23, 98

Pedal Function List ..........................................................91

Piano Room ......................................................................27

Piano Setting .....................................................................87

Pitch Bend .........................................................................98

Playback (Rhythm) ..........................................................42

Playback (Song) ................................................................44

Power .................................................................................15

Preset Voice List .............................................................106

Recording ..........................................................................54

Recording menu ...............................................................96

Rename ..............................................................................70

Repeat ................................................................................49

Restore .............................................................................105

Reverb ................................................................... 28, 34, 87

Reverb Type List ...............................................................90

Rewind ...............................................................................46

Rhythm ..............................................................................42

Rhythm List .....................................................................110

Save (Backup file) ...........................................................104

Scale Tune .........................................................................97

Smart Device .....................................................................77

Smart Device Connection Manual ..................................8

Smart Pianist .......................................................................8

Soft pedal ...........................................................................23

Song ....................................................................................43

Song category ....................................................................44

Song List ..........................................................................109

Song menu ........................................................................92

Song Repeat .......................................................................51

Sostenuto pedal ................................................................23

Sound .................................................................................98

Speaker ............................................................................100

Split ....................................................................................36

Split Point ..........................................................................36

Stereophonic Optimizer ..................................................22

String Resonance (Res.) ..................................................28

System menu .....................................................................97

Tempo ................................................................................39

Tempo (Song) ...................................................................47

Time signature ..................................................................40

Touch ...........................................................................28, 97

Touch Panel Sound ........................................................101

Track ..................................................................................57

Transpose (Keyboard) .....................................................87

Transpose (Song) .............................................................92

Troubleshooting .............................................................113

Tuning ...............................................................................97

USB Audio Interface ........................................................76

USB Autoload .................................................................100

USB flash drive .................................................................74

USB Format ....................................................................100

USB Properties ...............................................................100

User ....................................................................................44

Utility ...............................................................................100

Version ............................................................................101

Voice ..................................................................................30

Voice Demo Song List ...................................................108

Voice Edit ..........................................................................88

Voice List .........................................................................106

Voice menu .......................................................................87

Volume ..............................................................................21

Volume (Audio Song) .....................................................52

Volume (Metronome) .....................................................95

Volume (MIDI Song) ......................................................52

Volume balance ................................................................52

VRM .............................................................................28, 29

Wireless LAN .......................................................... 81, 102

Wireless LAN Option ....................................................103

WPS ...................................................................................82

XG ................................................................................30, 31

142

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

About

Bluetooth

• Bluetooth is a technology for wireless communication between devices within an area of about 10 meters

(33 ft.) employing the 2.4 GHz frequency band.

 Handling Bluetooth communications

• The 2.4 GHz band used by Bluetooth compatible devices is a radio band shared by many types of

equipment. While Bluetooth compatible devices use a technology minimizing the influence of other

components using the same radio band, such influence may reduce the speed or distance of

communications and in some cases interrupt communications.

• The speed of signal transfer and the distance at which communication is possible differs according to the

distance between the communicating devices, the presence of obstacles, radio wave conditions and the

type of equipment.

• Yamaha does not guarantee all wireless connections between this unit and devices compatible with

Bluetooth function.

Bluetooth capability

The models CLP-785, CLP-775, CLP-745, CLP-795GP and CLP-765GP are equipped with Bluetooth functionality;

however, even these models may not support Bluetooth, depending on the country in which you purchased the

product. If the Bluetooth logo is shown or printed on the control panel, this means that the product is equipped with

Bluetooth functionality.

785 775 745795GP 765GP

Bluetooth

logo

Bluetooth

logo

143

MEMO

CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual

144

For models equipped with Bluetooth /

Pour les modèles équipés de la fonctionnalité Bluetooth

For U.S.A.

For CANADA

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the

FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to

comply without testing of specific absorption rate (SAR).

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-

102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed

to comply without testing of specific absorption rate (SAR).

Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non

contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement

émet une énergie RF très faible qui est

considérée comme conf

orme sans évaluation du débit

d’absorption spécifique (DAS).

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two

conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the

device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage;

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible

d’en compro

mettre le fonctionnement.

145

For EU countries

BG Bulgarian

ОПРОСТЕНА ЕС ДЕКЛАРАЦИЯ ЗА СЪОТВЕТСТВИЕ

С настоящото Yamaha Music Europe GmbH декларира, че този тип радиосъоръжение

[CLP-785, CLP-775, CLP-745, CLP-795GP, CLP-765GP] е в съответствие с Директива

2014/53/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се

намери на следния интернет адрес:

https://europe.yamaha.com/en/support/compliance/doc.html

ES Spanish

DECLARACIÓN UE DE CONFORMIDAD SIMPLIFICADA

Por la presente, Yamaha Music Europe GmbH declara que el tipo de equipo radioeléctrico

[CLP-785, CLP-775, CLP-745, CLP-795GP, CLP-765GP] es conforme con la Directiva

2014/53/UE. El texto completo de la declaración UE de conformidad está disponible en la

dirección Internet siguiente:

https://europe.yamaha.com/en/support/compliance/doc.html

CS Czech

ZJEDNODUŠENÉ EU PROHLÁŠENÍ O SHODĚ

Tímto Yamaha Music Europe GmbH prohlašuje, že typ rádiového zařízení [CLP-

785, CLP-775, CLP-745, CLP-795GP, CLP-765GP] je v souladu se směrnicí 2014/

53/EU. Úplné znění EU prohlášení o shodě je k dispozici na této internetové adrese:

https://europe.yamaha.com/en/support/compliance/doc.html

DA Danish

FORENKLET EU-OVERENSSTEMMELSESERKLÆRING

Hermed erklærer Yamaha Music Europe GmbH, at radioudstyrstypen [CLP-785, CLP-775,

CLP-745, CLP-795GP, CLP-765GP] er i overensstemmelse med direktiv 2014/53/EU. EU-

overensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse:

https://europe.yamaha.com/en/support/compliance/doc.html

DE German

VEREINFACHTE EU-KONFORMITÄTSERKLÄRUNG

Hiermit erklärt Yamaha Music Europe GmbH, dass der Funkanlagentyp [CLP-785, CLP-

775, CLP-745, CLP-795GP, CLP-765GP] der Richtlinie 2014/53/EU entspricht. Der

vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse

verfügbar:

https://europe.yamaha.com/en/support/compliance/doc.html

ET Estonian

LIHTSUSTATUD ELI VASTAVUSDEKLARATSIOON

Käesolevaga deklareerib Yamaha Music Europe GmbH, et käesolev raadioseadme tüüp

[CLP-785, CLP-775, CLP-745, CLP-795GP, CLP-765GP] vastab direktiivi 2014/53/EL

nõuetele. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaad-

ressil:

https://europe.yamaha.com/en/support/compliance/doc.html

EL Greek

ΑΠΛΟΥΣΤΕΥΜΕΝΗ ΔΗΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ ΕΕ

Με την παρούσα ο/η Yamaha Music Europe GmbH, δηλώνει ότι ο ραδιοεξοπλισμός [CLP-

785, CLP-775, CLP-745, CLP-795GP, CLP-765GP] πληροί την οδηγία 2014/53/ΕΕ. Το

πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο

διαδίκτυο:

https://europe.yamaha.com/en/support/compliance/doc.html

EN English

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Yamaha Music Europe GmbH declares that the radio equipment type [CLP-785,

CLP-775, CLP-745, CLP-795GP, CLP-765GP] is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet

address:

https://europe.yamaha.com/en/support/compliance/doc.html

FR French

DECLARATION UE DE CONFORMITE SIMPLIFIEE

Le soussigné, Yamaha Music Europe GmbH, déclare que l'équipement radioélectrique du

type [CLP-785, CLP-775, CLP-745, CLP-795GP, CLP-765GP] est conforme à la directive

2014/53/UE. Le texte complet de la déclaration UE de conformité est disponible à l'adresse

internet suivante:

https://europe.yamaha.com/en/support/compliance/doc.html

HR Croatian

POJEDNOSTAVLJENA EU IZJAVA O SUKLADNOSTI

Yamaha Music Europe GmbH ovime izjavljuje da je radijska oprema tipa [CLP-785,

CLP-775, CLP-745, CLP-795GP, CLP-765GP] u skladu s Direktivom 2014/53/EU.

Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedećoj internetskoj adresi:

https://europe.yamaha.com/en/support/compliance/doc.html

IT Italian

DICHIARAZIONE DI CONFORMITÀ UE SEMPLIFICATA

Il fabbricante, Yamaha Music Europe GmbH, dichiara che il tipo di apparecchiatura radio

[CLP-785, CLP-775, CLP-745, CLP-795GP, CLP-765GP] è conforme alla direttiva 2014/

53/UE. Il testo completo della dichiarazione di conformità UE è disponibile al seguente indi-

rizzo Internet:

https://europe.yamaha.com/en/support/compliance/doc.html

LV Latvian

VIENKĀRŠOTA ES ATBILSTĪBAS DEKLARĀCIJA

Ar šo Yamaha Music Europe GmbH deklarē, ka radioiekārta [CLP-785, CLP-775, CLP-745,

CLP-795GP, CLP-765GP] atbilst Direktīvai 2014/53/ES. Pilns ES atbilstības deklarācijas

teksts ir pieejams šādā interneta vietnē:

https://europe.yamaha.com/en/support/compliance/doc.html

LT Lithuanian

SUPAPRASTINTA ES ATITIKTIES DEKLARACIJA

Aš, Yamaha Music Europe GmbH, patvirtinu, kad radijo įrenginių tipas [CLP-785,

CLP-775, CLP-745, CLP-795GP, CLP-765GP] atitinka Direktyvą 2014/53/ES. Visas

ES atitikties deklaracijos tekstas prieinamas šiuo interneto adresu:

https://europe.yamaha.com/en/support/compliance/doc.html

HU Hungarian

EGYSZERŰSÍTETT EU-MEGFELELŐSÉGI NYILATKOZAT

Yamaha Music Europe GmbH igazolja, hogy a [CLP-785, CLP-775, CLP-745, CLP-

795GP, CLP-765GP] típusú rádióberendezés megfelel a 2014/53/EU irányelvnek. Az

EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes címen:

https://europe.yamaha.com/en/support/compliance/doc.html

NL Dutch

VEREENVOUDIGDE EU-CONFORMITEITSVERKLARING

Hierbij verklaar ik, Yamaha Music Europe GmbH, dat het type radioapparatuur [CLP-785,

CLP-775, CLP-745, CLP-795GP, CLP-765GP] conform is met Richtlijn 2014/53/EU. De

volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het vol-

gende internetadres:

https://europe.yamaha.com/en/support/compliance/doc.html

PL Polish

UPROSZCZONA DEKLARACJA ZGODNOŚCI UE

Yamaha Music Europe GmbH niniejszym oświadcza, że typ urządzenia radiowego [CLP-

785, CLP-775, CLP-745, CLP-795GP, CLP-765GP] jest zgodny z dyrektywą 2014/53/UE.

Pełny tekst deklaracji zgodności UE jest dostępny pod następującym adresem interneto-

wym:

https://europe.yamaha.com/en/support/compliance/doc.html

PT Portuguese

DECLARAÇÃO UE DE CONFORMIDADE SIMPLIFICADA

O(a) abaixo assinado(a) Yamaha Music Europe GmbH declara que o presente tipo de

equipamento de rádio [CLP-785, CLP-775, CLP-745, CLP-795GP, CLP-765GP] está em

conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade

está disponível no seguinte endereço de Internet:

https://europe.yamaha.com/en/support/compliance/doc.html

RO Romanian

DECLARAȚIA UE DE CONFORMITATE SIMPLIFICATĂ

Prin prezenta, Yamaha Music Europe GmbH declară că tipul de echipamente radio [CLP-

785, CLP-775, CLP-745, CLP-795GP, CLP-765GP] este în conformitate cu Directiva 2014/

53/UE. Textul integral al declarației UE de conformitate este disponibil la următoarea

adresă internet:

https://europe.yamaha.com/en/support/compliance/doc.html

SK Slovak

ZJEDNODUŠENÉ EÚ VYHLÁSENIE O ZHODE

Yamaha Music Europe GmbH týmto vyhlasuje, že rádiové zariadenie typu [CLP-

785, CLP-775, CLP-745, CLP-795GP, CLP-765GP] je v súlade so smernicou 2014/

53/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adrese:

https://europe.yamaha.com/en/support/compliance/doc.html

SL Slovenian

POENOSTAVLJENA IZJAVA EU O SKLADNOSTI

Yamaha Music Europe GmbH potrjuje, da je tip radijske opreme [CLP-785, CLP-

775, CLP-745, CLP-795GP, CLP-765GP] skladen z Direktivo 2014/53/EU. Celotno

besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu:

https://europe.yamaha.com/en/support/compliance/doc.html

FI Finnish

YKSINKERTAISTETTU EU-VAATIMUSTENMUKAISUUSVAKUUTUS

Yamaha Music Europe GmbH vakuuttaa, että radiolaitetyyppi [CLP-785, CLP-775, CLP-

745, CLP-795GP, CLP-765GP] on direktiivin 2014/53/EU mukainen. EU-

vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa

internetosoitteessa:

https://europe.yamaha.com/en/support/compliance/doc.html

SV Swedish

FÖRENKLAD EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE

Härmed försäkrar Yamaha Music Europe GmbH att denna typ av radioutrustning [CLP-

785, CLP-775, CLP-745, CLP-795GP, CLP-765GP] överensstämmer med direktiv 2014/

53/EU. Den fullständiga texten till EU-försäkran om överensstämmelse finns på följande

webbadress:

https://europe.yamaha.com/en/support/compliance/doc.html

TR Turkey

BASİTLEŞTİRİLMİŞ AVRUPA BİRLİĞİ UYGUNLUK BİLDİRİMİ

İşbu belge ile, Yamaha Music Europe GmbH, radyo cihaz tipinin [CLP-785, CLP-775,

CLP-745, CLP-795GP, CLP-765GP], Direktif 2014/53/AB'ye uygunluğunu beyan eder.

AB uyumu beyanının tam metni aşağıdaki internet adresinden edinilebilir:

https://europe.yamaha.com/en/support/compliance/doc.html

146

(weee_eu_en_02)

(weee_eu_fr_02)

Apache License 2.0

SPDX-License-Identifier: Apache-2.0

Licensed under the Apache License, Version 2.0 (the License); you may not use this file except in compliance with the License.

You may obtain a copy of the License at

www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an AS IS BASIS,

WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

See the License for the specific language governing permissions and limitations under the License.

Modified BSD license

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are

met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this

software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE

FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR

TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Information for users on collection and disposal of old equipment:

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic

products should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in

accordance with your national legislation.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative

effects on human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your

waste disposal service or the point of sale where you purchased the items.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further

information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local

authorities or dealer and ask for the correct method of disposal.

Informations concernant la collecte et le traitement des déchets d’équipements électriques et

électroniques

Le symbole sur les produits, l'emballage et/ou les documents joints signifie que les produits électriques ou

électroniques usagés ne doivent pas être mélangés avec les déchets domestiques habituels.

Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et

électroniques, veuillez les déposer aux points de collecte prévus à cet effet, conformément à la réglementation

nationale.

En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la

sauvegarde de précieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui

pourraient advenir lors d'un traitement inapproprié des déchets.

Pour plus d'informations à propos de la collecte et du recyclage des déchets d’équipements électriques et

électroniques, veuillez contacter votre municipalité, votre service de traitement des déchets ou le point de vente où

vous avez acheté les produits.

Pour les professionnels dans l'Union européenne :

Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques, veuillez contacter

votre vendeur ou fournisseur pour plus d'informations.

Informations sur la mise au rebut dans d'autres pays en dehors de l'Union européenne :

Ce symbole est seulement valable dans l'Union européenne. Si vous souhaitez vous débarrasser de déchets

d’équipements électriques et électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander

la méthode de traitement appropriée.

147

Important Notice:

U.S. LIMITED WARRANTY for Customers in the United States

For detailed information about this Yamaha product and warranty service, please either

visit the following website address (printable file is available at our website) or contact

Customer Service at the address or telephone number identified below.

Website Address:

Yamaha.io/ClavinovaWarranty

Customer Service:

Yamaha Corporation of America

6600 Orangethorpe Avenue, Buena Park, CA 90620-1273

Telephone: 800-854-1569

For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below.

Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante.

CANADA

Yamaha Canada Music Ltd.

135 Milner Avenue, Toronto, Ontario M1S 3R1,

Canada

Tel: +1-416-298-1311

U.S.A.

Yamaha Corporation of America

6600 Orangethorpe Avenue, Buena Park, CA 90620,

U.S.A.

Tel: +1-714-522-9011

MEXICO

Yamaha de México, S.A. de C.V.

Av. Insurgentes Sur 1647 Piso 9, Col. San José

Insurgentes, Delegación Benito Juárez, México,

D.F., C.P. 03900, México

Tel: +52-55-5804-0600

BRAZIL

Yamaha Musical do Brasil Ltda.

Rua Fidêncio Ramos, 302 – Cj 52 e 54 – Torre B –

Vila Olímpia – CEP 04551-010 – São Paulo/SP,

Brazil

Tel: +55-11-3704-1377

ARGENTINA

Yamaha Music Latin America, S.A.,

Sucursal Argentina

Olga Cossettini 1553, Piso 4 Norte,

Madero Este-C1107CEK,

Buenos Aires, Argentina

Tel: +54-11-4119-7000

PANAMA AND OTHER LATIN

AMERICAN COUNTRIES/

CARIBBEAN COUNTRIES

Yamaha Music Latin America, S.A.

Edificio Torre Davivienda, Piso: 20

Avenida Balboa, Marbella, Corregimiento de Bella

Vista, Ciudad de Panamá, Rep. de Panamá

Tel: +507-269-5311

THE UNITED KINGDOM/IRELAND

Yamaha Music Europe GmbH (UK)

Sherbourne Drive, Tilbrook, Milton Keynes,

MK7 8BL, U.K.

Tel: +44-1908-366700

GERMANY

Yamaha Music Europe GmbH

Siemensstrasse 22-34, 25462 Rellingen, Germany

Tel: +49-4101-303-0

SWITZERLAND/LIECHTENSTEIN

Yamaha Music Europe GmbH, Branch

Switzerland in Thalwil

Seestrasse 18a, 8800 Thalwil, Switzerland

Tel: +41-44-3878080

AUSTRIA/CROATIA/

CZECH REPUBLIC

HUNGARY/ROMANIA/SLOVAKIA/

SLOVENIA

Yamaha Music Europe GmbH, Branch Austria

Schleiergasse 20, 1100 Wien, Austria

Tel: +43-1-60203900

POLAND

Yamaha Music Europe GmbH

Sp.z o.o. Oddział w Polsce

ul. Wielicka 52, 02-657 Warszawa, Poland

Tel: +48-22-880-08-88

BULGARIA

Dinacord Bulgaria LTD.

Bul.Iskarsko Schose 7 Targowski Zentar Ewropa

1528 Sofia, Bulgaria

Tel: +359-2-978-20-25

MALTA

Olimpus Music Ltd.

Valletta Road, Mosta MST9010, Malta

Tel: +356-2133-2093

NETHERLANDS/BELGIUM/

LUXEMBOURG

Yamaha Music Europe, Branch Benelux

Clarissenhof 5b, 4133 AB Vianen, The Netherlands

Tel: +31-347-358040

FRANCE

Yamaha Music Europe

7 rue Ambroise Croizat, Zone d'activités de Pariest,

77183 Croissy-Beaubourg, France

Tel: +33-1-6461-4000

ITALY

Yamaha Music Europe GmbH, Branch Italy

Via Tinelli N.67/69 20855 Gerno di Lesmo (MB),

Italy

Tel: +39-039-9065-1

SPAIN/PORTUGAL

Yamaha Music Europe GmbH Ibérica, Sucursal

en España

Ctra. de la Coruña km. 17,200, 28231

Las Rozas de Madrid, Spain

Tel: +34-91-639-88-88

GREECE

Philippos Nakas S.A. The Music House

19th klm. Leof. Lavriou 190 02 Peania – Attiki,

Greece

Tel: +30-210-6686260

SWEDEN

Yamaha Music Europe GmbH Germany filial

Scandinavia

JA Wettergrensgata 1, 400 43 Göteborg, Sweden

Tel: +46-31-89-34-00

DENMARK

Yamaha Music Denmark,

Fillial of Yamaha Music Europe GmbH, Tyskland

Generatorvej 8C, ST. TH., 2860 Søborg, Denmark

Tel: +45-44-92-49-00

FINLAND

F-Musiikki Oy

Antaksentie 4

FI-01510 Vantaa, Finland

Tel: +358 (0)96185111

NORWAY

Yamaha Music Europe GmbH Germany -

Norwegian Branch

Grini Næringspark 1, 1332 Østerås, Norway

Tel: +47-6716-7800

ICELAND

Hljodfaerahusid Ehf.

Sidumula 20

IS-108 Reykjavik, Iceland

Tel: +354-525-5050

CYPRUS

Nakas Music Cyprus Ltd.

Nikis Ave 2k

1086 Nicosia

Tel: + 357-22-511080

Major Music Center

21 Ali Riza Ave. Ortakoy

P.O.Box 475 Lefkoşa, Cyprus

Tel: (392) 227 9213

RUSSIA

Yamaha Music (Russia) LLC.

Room 37, entrance 7, bld. 7, Kievskaya street,

Moscow, 121059, Russia

Tel: +7-495-626-5005

OTHER EUROPEAN COUNTRIES

Yamaha Music Europe GmbH

Siemensstrasse 22-34, 25462 Rellingen, Germany

Tel: +49-4101-303-0

Yamaha Music Gulf FZE

JAFZA-16, Office 512, P.O.Box 17328,

Jebel Ali FZE, Dubai, UAE

Tel: +971-4-801-1500

TURKEY

Yamaha Music Europe GmbH

Merkezi Almanya Türkiye İstanbul Şubesi

Mor Sumbul Sokak Varyap Meridian Business

1.Blok No:1 113-114-115

Bati Atasehir Istanbul, Turkey

Tel: +90-216-275-7960

ISRAEL

RBX International Co., Ltd.

P.O Box 10245, Petach-Tikva, 49002

Tel: (972) 3-925-6900

OTHER COUNTRIES

Yamaha Music Gulf FZE

JAFZA-16, Office 512, P.O.Box 17328,

Jebel Ali FZE, Dubai, UAE

Tel: +971-4-801-1500

THE PEOPLE’S REPUBLIC OF CHINA

Yamaha Music & Electronics (China) Co., Ltd.

2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,

Shanghai, China

Tel: +86-400-051-7700

HONG KONG

Tom Lee Music Co., Ltd.

11/F., Silvercord Tower 1, 30 Canton Road,

Tsimshatsui, Kowloon, Hong Kong

Tel: +852-2737-7688

INDIA

Yamaha Music India Private Limited

P-401, JMD Megapolis, Sector-48, Sohna Road,

Gurugram-122018, Haryana, India

Tel: +91-124-485-3300

INDONESIA

PT. Yamaha Musik Indonesia (Distributor)

Yamaha Music Center Bldg. Jalan Jend. Gatot

Subroto Kav. 4, Jakarta 12930, Indonesia

Tel: +62-21-520-2577

KOREA

Yamaha Music Korea Ltd.

11F, Prudential Tower, 298, Gangnam-daero,

Gangnam-gu, Seoul, 06253, Korea

Tel: +82-2-3467-3300

MALAYSIA

Yamaha Music (Malaysia) Sdn. Bhd.

No.8, Jalan Perbandaran, Kelana Jaya, 47301

Petaling Jaya, Selangor, Malaysia

Tel: +60-3-78030900

SINGAPORE

Yamaha Music (Asia) Private Limited

Block 202 Hougang Street 21, #02-00,

Singapore 530202, Singapore

Tel: +65-6740-9200

TAIWAN

Yamaha Music & Electronics Taiwan Co., Ltd.

2F., No.1, Yuandong Rd., Banqiao Dist.,

New Taipei City 22063, Taiwan (R.O.C.)

Tel: +886-2-7741-8888

THAILAND

Siam Music Yamaha Co., Ltd.

3, 4, 15, 16th Fl., Siam Motors Building,

891/1 Rama 1 Road, Wangmai,

Pathumwan, Bangkok 10330, Thailand

Tel: +66-2215-2622

VIETNAM

Yamaha Music Vietnam Company Limited

15th Floor, Nam A Bank Tower, 201-203 Cach

Mang Thang Tam St., Ward 4, Dist.3,

Ho Chi Minh City, Vietnam

Tel: +84-28-3818-1122

OTHER ASIAN COUNTRIES

https://asia-latinamerica-mea.yamaha.com/

index.html

AUSTRALIA

Yamaha Music Australia Pty. Ltd.

Level 1, 80 Market Street, South Melbourne,

VIC 3205 Australia

Tel: +61-3-9693-5111

NEW ZEALAND

Music Works LTD

P.O.BOX 6246 Wellesley, Auckland 4680,

New Zealand

Tel: +64-9-634-0099

COUNTRIES AND TRUST

TERRITORIES IN PACIFIC OCEAN

https://asia-latinamerica-mea.yamaha.com/

index.html

NORTH AMERICA

CENTRAL & SOUTH AMERICA

EUROPE

AFRICA

MIDDLE EAST

ASIA

OCEANIA

DMI27

Head Office/Manufacturer: Yamaha Corporation 10-1, Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, Japan

(For European Countries) Importer: Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany

Yamaha Global Site

https://www.yamaha.com/

Yamaha Downloads

https://download.yamaha.com/

Manual Development Group

Published 03/2020 MWMA*.*- **B0

VDG2300

Yamaha CLP-795GP Manual de usuario

Marca: Yamaha

Modelo: CLP-795GP

Categoría: Pianos digitales

Tipo: Manual de usuario

Descargar PDF

informe

En otros idiomas

français: Yamaha CLP-795GP Manuel utilisateur
italiano: Yamaha CLP-795GP Manuale utente
English: Yamaha CLP-795GP User manual
Deutsch: Yamaha CLP-795GP Benutzerhandbuch
русский: Yamaha CLP-795GP Руководство пользователя
Nederlands: Yamaha CLP-795GP Handleiding
português: Yamaha CLP-795GP Manual do usuário
dansk: Yamaha CLP-795GP Brugermanual
polski: Yamaha CLP-795GP Instrukcja obsługi
čeština: Yamaha CLP-795GP Uživatelský manuál
română: Yamaha CLP-795GP Manual de utilizare

Yamaha CLP-795GP Manual de usuario

Yamaha CLP-795GP Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos