ARO ARO DAB05- PPAA-B-A Manual de usuario

Tipo
Manual de usuario
OPERATOR’S MANUAL DAB05-XXXX-X-X
Released / Liberado / Decharge: 7-26-06
Revised / Revisado / Revise: 10-13-10
(REV. 03)
DAB05-XXXX-X-X DELIVERY SYSTEM
1/2” DIAPHRAGM PUMP, 1:1 RATIO, DRUM MOUNT
SISTEMA DE ENTREGA DAB05-XXXX-X-X INSTALACIÓN EN TAMBOR, BOMBA DE DIAFRAGMA DE 1/2”, RELACIÓN 1:1
SYSTÈME DE DISTRIBUTION DAB05-XXXX-X-X POMPE À DIAPHRAGME DE 1/2 PO, RAPPORT DE 1:1, MONTÉ SUR LE BARIL
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
MANUAL DEL OPERARIO / MANUEL DE L’UTILISATEUR
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
INCLUYE: FUNCIONAMIENTO, INSTALACIÓN Y MANTENIMIENTO
COMPREND: FONCTIONNEMENT, INSTALLATION ET ENTRETIEN
INCLUDE MANUALS: PD05P-X-X-B Diaphragm Pump (pn 97999-1164) or PD05X-X-X-B Diaphragm Pump (pn 97999-1167),
P391XX-XXX Piggyback Filter / Regulator (pn 100400-59) & S-631 General Information (pn 97999-623).
También incluye los manuales: PD05P-X-X-B Bomba de Diafragma (pn 97999-1165) o PD05X-X-X-B Bomba de Diafragma (pn 97999-1168), P391XX-XXX Módulo
de Filtro / Regulador Superpuesto (pn 100400-59) & S-631 Informacion General (pn 97999-623).
Comprend aussi les manuels: PD05P-X-X-B Pompe à Diaphragme (pn 97999-1166) ou PD05X-X-X-B Pompe à Diaphragme (pn 97999-1169), P391XX-XXX Module
Filtre Régulateur (pn 100400-59) & S-631 Information Generale (pn 97999-623).
SERVICE KITS
104302 for repair of P39124-600 piggyback filter / regulator.
637334 for repair of 95199 dispensing nozzle.
637335 for repair of 95183 oil spigot.
MODEL DESCRIPTION CHART
DAB05 - X XXX-X- X
Ball Material
A - SantoprenerT - PTFE
C - HytrelrU - Polyurethane
Fluid Outlet Accessories
A - No outlet accessory
B - 10’ E.P.D.M. hose (for polypropylene pump)
C - 10’ Vinyl hose (for polypropylene pump)
D - Oil Tapper (for aluminum pump)
E - 10’ E.P.D.M. hose, Piggyback Filter / Regulator (for polypropylene pump)
F - 10’ Vinyl hose, Piggyback Filter / Regulator (for polypropylene pump)
G - No outlet acc’y, Piggyback Filter / Regulator (for aluminum pump)
H - No outlet acc’y, Piggyback Filter / Regulator (for stainless steel pump)
J - 10’ Nitrile hose with radiator bibb (for polypropylene pump)
K - 10’ E.P.D.M. hose, Poly dispensing valve (for polypropylene pump)
L - 10’ Nitrile hose with radiator bibb (for aluminum pump)
M - 10’ Nitrile hose with non-drip tip (for polypropylene pump)
N - 10’ Nitrile hose (for polypropylene pump)
O - 10’ Nitrile hose (for aluminum pump)
P - 10’ Nitrile hose with non-drip tip (for aluminum pump)
Fluid Cap And Manifold Material
A - Aluminum
P - Polypropylene
S - Stainless Steel
Seat Material
P - Polypropylene
S - Stainless Steel
Diaphragm Material
A - Santoprene T - PTFE
C - Hytrel U - Polyurethane
Suction Tube Length
2 - 55 Gallon
B - 55 Gallon with Foot Valve
DIMENSIONAL DATA
MODEL NUMBER ‘A” ‘B” ‘C”
DAB05-AXXX-X-X 9-31/32” (253 mm) 8-5/32” (207 mm) 51-5/32” (1299 mm)
DAB05-PXXX-X-X 12-1/32” (306 mm) 8-3/32” (206 mm) 50-5/32” (1274 mm)
DAB05-SXXX-X-X 7-3/4” (197 mm) 8-3/32” (206 mm) 49-25/32” (1264 mm)
Figure 1 / Figura 1 / Figure 1
DAB05-XXXX-X-X DRUM PUMP ASSEMBLY
CONJUNTO DE LA BOMBA DE TAMBOR DAB05-XXXX-X-X
POMPE A BARIL DAB05-XXXX-X-X
“A”
“B”
“C”
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276 © 2010 CCN 15262264
www.ingersollrandproducts.com
DAB05-XXXX-X-XPage 2 of 4
MAJOR COMPONENTS PARTS LIST / LISTA DE PARTES DE LOS COMPONENTES PRINCIPALES / LISTE DES PIÈCES PRINCIPALES
Model Number
N
ú
m
e
r
o
d
e
M
o
d
e
l
o
“1” “2” “4” “22” “23”
N
ú
mero de Modelo
Numero de Modeles Pump Assembly Lockout Valve Piggyback Hose Fitting [Mtl] Hose Assemby [Mtl] Dispensing Valve [Mtl]
DAB05-APCC-2-A PD05R-AAS-PCC-B 104390-2 ----- ----- ----- -----
DAB05-APCC-2-O PD05R-AAS-PCC-B 104390-2 ----- 95190 [A] 621518-10 [B] -----
DAB05-APCC-B-D PD05R-AAS-PCC-B 104390-2 ----- ----- ----- 77617-Z / 95183 [A / B / C]
DAB05-APCC-B-L PD05R-AAS-PCC-B 104390-2 ----- 95190 [A] 621520-10 [B] 635129-Z [A/B/Br/Z]
DAB05-APCC-B-P PD05R-AAS-PCC-B 104390-2 ----- 95190 [A] ----- 621524-10 [B / C]
DAB05-ASAA-2-A PD05R-AAS-SAA-B 104390-2 ----- ----- ----- -----
DAB05-ASCC-2-G PD05R-AAS-SCC-B ----- P39124-600 ----- ----- -----
DAB05-ASTT-2-A PD05R-AAS-STT-B 104390-2 ----- ----- ----- -----
DAB05-PPAA-2-A PD05P-ARS-PAA-B 104390-2 ----- ----- ----- -----
DAB05-PPAA-2-B PD05P-ARS-PAA-B 104390-2 ----- 95189 [P] 621515-10 [E] -----
DAB05-PPAA-2-E PD05P-ARS-PAA-B ----- P39124-600 95189 [P] 621515-10 [E] -----
DAB05-PPAA-B-A PD05P-ARS-PPA-B 104390-2 ----- ----- ----- -----
DAB05-PPAA-B-K PD05P-ARS-PAA-B 104390-2 ----- 95189 [P] 621514-10 [E] 95199 [P / SS / V]
DAB05-PPCC-2-A PD05P-ARS-PCC-B 104390-2 ----- ----- ----- -----
DAB05-PPCC-2-M PD05P-ARS-PCC-B 104390-2 ----- 621523-10 [B / C]
DAB05-PPCC-2-N PD05P-ARS-PCC-B 104390-2 ----- 95189 [P]
95189 [P]
621517-10 [B] -----
DAB05-PPCC-B-J PD05P-ARS-PCC-B 104390-2 ----- 95189 [P] 621516-10 [B] 635129-Z [A/B/Br/Z]
DAB05-PPCC-B-M PD05P-ARS-PCC-B 104390-2 ----- 95189 [P] ----- 621523-10 [B / C]
DAB05-PPTT-2-A PD05P-ARS-PTT-B 104390-2 ----- ----- ----- -----
DAB05-PPUU-2-A PD05P-ARS-PUU-B 104390-2 ----- ----- ----- -----
DAB05-PPUU-2-C PD05P-ARS-PUU-B 104390-2 ----- 95189 [P] 621519-10 [Vy] -----
DAB05-PPUU-2-F PD05P-ARS-PUU-B ----- P39124-600 95189 [P] 621519-10 [Vy] -----
DAB05-SSTT-2-A PD05R-ASS-STT-B 104390-2 ----- ----- ----- -----
DAB05-SSTT-2-H PD05R-ASS-STT-B ----- P39124-600 ----- ----- -----
PARTS LIST / LISTA DE PIEZAS / LISTE DES PIECES
Item
Elem.
Art.
Description
(size)
Descripción
(tamaño)
Description
(taille)
Qty
Cant.
Quan.
Part No.
Número
Numero [Mtl] Item
Elem.
Art.
Description
(size)
Descripción
(tamaño)
Description
(taille)
Qty
Cant.
Quan.
Part No.
Número
Numero [Mtl]
1Diaphragm Pump Assembly (1) see chart ---
2Lockout Valve / Piggyback Fil. - Reg. (1) see chart ---
3Nipple
(1/4 - 18 N.P.T. x 7/8”)
(1) Y27-2-C [I]
4Hose Fitting
(1/2 - 14 N.P.T.)
(1) see chart ---
5Hex Cap Screw
(1/4” - 20 x 1”)
(4) Y6-45-T [SS]
6Washer
(9/32” i.d. x 5/8” o.d.)
(4) 93096 [SS]
7Nut
(1/4” - 20)
(4) 93828 [SS]
8Gasket
(models DAB05-XXAA-X-X)
(1) 95006-4 [E]
(models DAB05-XXCC-X-X)
(1) 95006-1 [B]
(models DAB05-XXTT-X-X)
(1) 95006-2 [V]
(models DAB05-XXUU-X-X)
(1) 95006-1 [B]
9‘O” Ring
(3/32” x 1” o.d.)
(models DAB05-XXAA-B-X)
(1) 95201 [E]
(models DAB05-XXCC-B-X)
(1) Y325-117 [B]
gK
(includedinoptionalfootvalvekit)/(incluidos
en el juego optativo de válvula de aspira-
ción) / (inclus avec la trousse optionnelle
de la soupape au pied)
(1) Y327-117 [V]
10 Ball
(0.750” dia.)(models DAB05-XXAA-B-X)
(1) 93100-E [Sp]
(models DAB05-XXCC-B-X)
(1) 93100-2 [B]
gK
(includedinoptionalfootvalvekit)/(incluidos
en el juego optativo de válvula de aspira-
ción) / (inclus avec la trousse optionnelle
de la soupape au pied)
(1) 93100-3 [V]
11 Foot Valve Body
g
(models DAB05-APXX-B-X)
(1) 95182 [SS]
K
(models DAB05-PPXX-B-X)
(1) 95181 [P]
12 Suction Tube
(models DAB05-PXXX-X-X)
(1) 95184 [P]
(DAB05-AXXX-X-X and DAB05-SXXX-X-X)
(1) 95185 [SS]
13 Thumb Screw
(1/4” - 20 x 1”)
(2) 95948576 [SS]
14 Nut
(1/4” - 20)
(2) Y12-4-S [SS]
15 Clamp Plate (2) 95054 [SS]
16 Bung Adapter
(models DAB05-AXXX-X-X)
(1) 95033-4 [A]
(models DAB05-PXXX-X-X)
(1) 95033-1 [P]
(models DAB05-SXXX-X-X)
(1) 95033-5 [SS]
17 Baseplate
(models DAB05-AXXX-X-X)
(1) 95032-6 [A]
(models DAB05-PXXX-X-X)
(1) 95032 [P]
(models DAB05-SXXX-X-X)
(1) 95032-7 [SS]
18 Nipple
(1/2 - 14 N.P.T.F.)(DAB05-PXXX only)
(1) 95076-1 [P]
19 Seal
(models DAB05-PXXX-X-X)
(1) 95074 [UH]
(DAB05-AXXX-X-X and DAB05-SXXX-X-X)
(1) 95198 [V]
20 Retaining Ring (1) 95124 [SS]
21 Washer (1) 95005 [SS]
Items Not Shown / No Mostrado / Non Illustré
22 Hose Assembly (1) see chart ---
23 Dispensing Valve (1) see chart ---
24 Swivel
(models DAB05-XXXX-X-K only)
(1) 95200 [P]
KItems included in Foot Valve Kit
Incluidos en el juego de válvula de aspiración
Iinclus avec la trousse de la soupape au pied
637336
gItems included in Foot Valve Kit
Incluidos en el juego de válvula de aspiración
Iinclus avec la trousse de la soupape au pied
637337
Hytrel and Viton are registered trademarks of the DuPont Company Santoprene is a registered trademark of Monsanto Company, licensed to Advanced Elastomer Systems, L.P.
Hytrel y Viton son marca registrada de DuPont Company Santoprene es una marca registrada de Monsanto Company, usuario autorizado Advanced Elastomer Systems, L.P.
Hytrel et Viton sont marque déposée de la société DuPont Santoprene est une marque déposée de Monsanto Company, fabriqué sous licence par Advanced Elastomer Systems, L.P.
Page 3 of 4
DAB05-XXXX-X-X
PARTS LIST / LISTA DE PIEZAS / LISTE DES PIECES / DAB05-XXXX-X-X
3
4
19
20
Models DAB05-A XXX-X-X and DAB05-S XXX-X-X
Modelos DAB05-A XXX-X-X y DAB05-S XXX-X-X
Modèles DAB05-A XXX-X-X et DAB05-S XXX-X-X
2
21
5
6
7
8
9
10
11
12
13
14
15
16
17
19
Models DAB05-PXXX-X-X
Modelos DAB05-P XXX-X-X
Modèles DAB05-P XXX-X-X
MATERIAL CODE / CÓDIGO DEL
MATERIAL / CODE DE MATERIAU
[A] = Aluminum / Aluminio / Aluminium
[B] = Nitrile / Nitrile / Nitrile
[Br] = Brass / Latón / Laiton
[C] = Carbon Steel / Acero al Carbón / Acier au Carbone
[E] = E.P.R. / E.P.R. / E.P.R.
[I] = Iron / Hierro / Fer
[P] = Polypropylene / Polipropileno / Polypropylène
[Sp] = Santoprene / Santoprene / Santoprene
[SS] = Stainless Steel / Acero inoxidable / Acier inoxydable
[UH] = UHMW-PE / UHMW-PE / UHMW-PE
[V] = Viton / Viton / Viton
[Vy] = Vinyl / Vinilo / Vinyle
[Z] = Zinc / Zinc / Zinc
1
18
DAB05-XXXX-X-XPage 4 of 4
LEA CUIDADOSAMENTE ESTE
MANUAL ANTES DE INSTALAR
ESTE EQUIPO, OPERARLO O
REALIZARLE SERVICIO.
El empresario tiene la responsabilidad de poner esta información en
manos de los operarios. Guárdela como referencia en el futuro.
JUEGOS DE SERVICIO
104302 para reparar el filtro / regulador superpuesto P39124-600.
637334 para reparar la boquilla surtidora 95199.
637335 para reparar la espita de aceite 95183.
CUADRO DE DESCRIPCIÓN DEL MODELO
DAB05 - X XXX-X- X
Material de la Bola
A - SantoprenerT - PTFE
C - HytrelrU - Polyurethane
Accesorios de Salida del Fluido
A - No hay accesorio de salida
B - Manguera de 10’ (3 m) E.P.D.M. (M.D.E.P.) (para la bomba de polipro-
pileno)
C - Manguera de vinilo de 10’ (3 m) (para la bomba de polipropileno)
D - Desviador de aceite (para bombas de aluminio)
E - Manguera de 10’ (3 m) E.P.D.M. (M.D.E.P.), Filtro / regulador super-
puesto (para la bomba de polipropileno)
F - Manguera de vinilo de 10’ (3 m), Filtro / regulador superpuesto (para
la bomba de polipropileno)
G - No hay accesorio de salida, Filtro / regulador superpuesto (para bomb-
as de aluminio)
H - No hay accesorio de salida, Filtro / regulador superpuesto (para
bomba de acero inoxidable)
J - Manguera de nitrilo de 10’ (3 m) con delantal para el radiador (para la
bomba de polipropileno)
K - Manguera de 10’ (3 m) E.P.D.M. (M.D.E.P.), válvula surtidora de polieti-
leno (para la bomba de polipropileno)
L - Manguera de nitrilo de 10’ (3 m) con delantal para el radiador (para
bombas de aluminio)
M - Manguera de nitrilo de 10’ (3 m) con boquilla contra derrames (para
la bomba de polipropileno)
N - Manguera de nitrilo de 10’ (3 m) (para la bomba de polipropileno)
O - Manguera de nitrilo de 10’ (3 m) (para bombas de aluminio)
P - Manguera de nitrilo de 10’ (3 m) con boquilla contra derrames (para
bombas de aluminio)
Capuchón del Fluido y del Material del
Tubo ltiple
A - Aluminio
P - Polipropileno
S - Acero inoxidable
Material del Asiento
P - Polipropileno
S - Acero inoxidable
Material del Diafragma
A - Santoprene T - PTFE
C - Hytrel U - Polyurethane
Sección de Tubo de Succión
2 - 55 Galones
B - 55 Galones con válvula de aspiración
DATOS DIMENSIONALES (Véase la figura 1)
NÚMERO DE MODELO “A” “B” “C”
DAB05-AXXX-X-X 9-31/32” (253 mm) 8-5/32” (207 mm) 51-5/32” (1299 mm)
DAB05-PXXX-X-X 12-1/32” (306 mm) 8-3/32” (206 mm) 50-5/32” (1274 mm)
DAB05-SXXX-X-X 7-3/4” (197 mm) 8-3/32” (206 mm) 49-25/32” (1264 mm)
LIRE ATTENTIVEMENT CE MANUEL
AVANT D’INSTALLER, D’UTILISER
OU DE REPARER CET APPAREIL.
Il incombe à l’employeur de s’assurer que ces informations seront
lues par l’opérateur. Conserver pour toute référence ultérieure.
KITS D’ENTRETIEN
104302 pour réparer le filtre régulateur P39124-600.
637334 pour réparer la buse de distribution 95199.
637335 pour réparer le fausset d’huile 95183.
TABLEAU DES DESCRIPTIONS DE MODELES
DAB05 - X X X X -X- X
Matériau de Bille
A - SantopreneRT - PTFE
C - HytrelRU - Polyurethane
Accessoires de Sortie du Liquide
A - Aucun accessoire de sortie
B - 10 pi de tuyau EPDM (pour la pompe en polypropylène)
C - 10 pi de tuyau de vinyle (pour la pompe en polypropylène)
D - Taraudeuse à huile (pour la pompe en aluminium)
E - 10 pi de tuyau EPDM, filtre régulateur (pour la pompe en polypro-
pylène)
F - 10 pi de tuyau de vinyle, filtre régulateur (pour la pompe en polypro-
pylène)
G - Aucun accessoire de sortie, filtre régulateur (pour la pompe en alumini-
um)
H - Aucun accessoire de sortie, filtre régulateur (pour la pompe en acier
inoxydable)
J - 10 pi de tuyau de nitrile avec croisillon de radiateur (pour la pompe en
polypropylène)
K - 10 pi de tuyau EPDM, soupape de distribution en poly (pour la pompe
en polypropylène)
L - 10 pi de tuyau de nitrile avec croisillon de radiateur (pour la pompe en
aluminium)
M - 10 pi de tuyau de nitrile avec extrémité sans égouttement (pour la
pompe en polypropylène)
N - 10 pi de tuyau de nitrile (pour la pompe en polypropylène)
O - 10 pi de tuyau de nitrile (pour la pompe en aluminium)
P - 10 pi de tuyau de nitrile avec extrémité sans égouttement (pour la
pompe en aluminium)
Couvercle et Collecteur de Liquide
A - Aluminium
P - Polypropylène
S - Acier inoxydable
Materiau de Siege
P - Polypropylène
S - Acier inoxydable
Matériau de Diaphragme
A - Santoprene T - PTFE
C - Hytrel U - Polyurethane
Longueur de Tube D’aspiration
2 - 55 Gallons
B - 55 Gallons avec soupape au pied
DONNÉES DIMENSIONNELLES (Voir la figure 1)
NUMERO DE MODELES “A” “B” “C”
DAB05-AXXX-X-X 9-31/32” (253 mm) 8-5/32” (207 mm) 51-5/32” (1299 mm)
DAB05-PXXX-X-X 12-1/32” (306 mm) 8-3/32” (206 mm) 50-5/32” (1274 mm)
DAB05-SXXX-X-X 7-3/4” (197 mm) 8-3/32” (206 mm) 49-25/32” (1264 mm)
PN 97999-1191

Transcripción de documentos

DAB05-XXXX-X-X OPERATOR’S MANUAL MANUAL DEL OPERARIO / MANUEL DE L’UTILISATEUR Released / Liberado / Decharge: 7-26-06 Revised / Revisado / Revise: 10-13-10 (REV. 03) INCLUDING: OPERATION, INSTALLATION & MAINTENANCE INCLUYE: FUNCIONAMIENTO, INSTALACIÓN Y MANTENIMIENTO COMPREND: FONCTIONNEMENT, INSTALLATION ET ENTRETIEN INCLUDE MANUALS: PD05P-X-X-B Diaphragm Pump (pn 97999-1164) or PD05X-X-X-B Diaphragm Pump (pn 97999-1167), P391XX-XXX Piggyback Filter / Regulator (pn 100400-59) & S-631 General Information (pn 97999-623). También incluye los manuales: PD05P-X-X-B Bomba de Diafragma (pn 97999-1165) o PD05X-X-X-B Bomba de Diafragma (pn 97999-1168), P391XX-XXX Módulo de Filtro / Regulador Superpuesto (pn 100400-59) & S-631 Informacion General (pn 97999-623). Comprend aussi les manuels: PD05P-X-X-B Pompe à Diaphragme (pn 97999-1166) ou PD05X-X-X-B Pompe à Diaphragme (pn 97999-1169), P391XX-XXX Module Filtre Régulateur (pn 100400-59) & S-631 Information Generale (pn 97999-623). DAB05-XXXX-X-X DELIVERY SYSTEM 1/2” DIAPHRAGM PUMP, 1:1 RATIO, DRUM MOUNT SISTEMA DE ENTREGA DAB05-XXXX-X-X INSTALACIÓN EN TAMBOR, BOMBA DE DIAFRAGMA DE 1/2”, RELACIÓN 1:1 SYSTÈME DE DISTRIBUTION DAB05-XXXX-X-X POMPE À DIAPHRAGME DE 1/2 PO, RAPPORT DE 1:1, MONTÉ SUR LE BARIL READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT. It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference. SERVICE KITS 104302 for repair of P39124-600 piggyback filter / regulator. 637334 for repair of 95199 dispensing nozzle. 637335 for repair of 95183 oil spigot. DAB05-XXXX-X-X DRUM PUMP ASSEMBLY CONJUNTO DE LA BOMBA DE TAMBOR DAB05-XXXX-X-X POMPE A BARIL DAB05-XXXX-X-X “A” MODEL DESCRIPTION CHART DAB05 - X X X X - X - X Fluid Cap And Manifold Material A - Aluminum P - Polypropylene S - Stainless Steel “B” Seat Material P - Polypropylene S - Stainless Steel Ball Material A - Santoprener C - Hytrelr T - PTFE U - Polyurethane Diaphragm Material A - Santoprene C - Hytrel T - PTFE U - Polyurethane Suction Tube Length 2 - 55 Gallon B - 55 Gallon with Foot Valve Fluid Outlet Accessories A - No outlet accessory B - 10’ E.P.D.M. hose (for polypropylene pump) C - 10’ Vinyl hose (for polypropylene pump) D - Oil Tapper (for aluminum pump) E - 10’ E.P.D.M. hose, Piggyback Filter / Regulator (for polypropylene pump) F - 10’ Vinyl hose, Piggyback Filter / Regulator (for polypropylene pump) G - No outlet acc’y, Piggyback Filter / Regulator (for aluminum pump) H - No outlet acc’y, Piggyback Filter / Regulator (for stainless steel pump) J - 10’ Nitrile hose with radiator bibb (for polypropylene pump) K - 10’ E.P.D.M. hose, Poly dispensing valve (for polypropylene pump) L - 10’ Nitrile hose with radiator bibb (for aluminum pump) M - 10’ Nitrile hose with non-drip tip (for polypropylene pump) N - 10’ Nitrile hose (for polypropylene pump) O - 10’ Nitrile hose (for aluminum pump) P - 10’ Nitrile hose with non-drip tip (for aluminum pump) “C” DIMENSIONAL DATA MODEL NUMBER ‘‘A” DAB05-AXXX-X-X 9-31/32” (253 mm) DAB05-PXXX-X-X 12-1/32” (306 mm) DAB05-SXXX-X-X 7-3/4” (197 mm) ‘‘B” 8-5/32” (207 mm) 8-3/32” (206 mm) 8-3/32” (206 mm) ‘‘C” 51-5/32” (1299 mm) 50-5/32” (1274 mm) 49-25/32” (1264 mm) INGERSOLL RAND COMPANY LTD 209 NORTH MAIN STREET – BRYAN, OHIO 43506 (800) 495-0276 FAX(800) 892-6276 www.ingersollrandproducts.com © 2010 CCN 15262264 Figure 1 / Figura 1 / Figure 1 MAJOR COMPONENTS PARTS LIST / LISTA DE PARTES DE LOS COMPONENTES PRINCIPALES / LISTE DES PIÈCES PRINCIPALES Model Number Número de Modelo Numero de Modeles “1” “2” Pump Assembly Lockout Valve “4” Piggyback “22” Hose Fitting [Mtl] “23” Hose Assemby [Mtl] DAB05-APCC-2-A DAB05-APCC-2-O DAB05-APCC-B-D DAB05-APCC-B-L DAB05-APCC-B-P DAB05-ASAA-2-A DAB05-ASCC-2-G DAB05-ASTT-2-A DAB05-PPAA-2-A DAB05-PPAA-2-B DAB05-PPAA-2-E DAB05- PPAA-B-A PD05R-AAS-PCC-B PD05R-AAS-PCC-B PD05R-AAS-PCC-B PD05R-AAS-PCC-B PD05R-AAS-PCC-B PD05R-AAS-SAA-B PD05R-AAS-SCC-B PD05R-AAS-STT-B PD05P-ARS-PAA-B PD05P-ARS-PAA-B PD05P-ARS-PAA-B PD05P-ARS-PPA-B 104390-2 104390-2 104390-2 104390-2 104390-2 104390-2 ----104390-2 104390-2 104390-2 ----104390-2 ------------------------P39124-600 ------------P39124-600 ----- ----95190 ----95190 95190 ----------------95189 95189 ----- DAB05-PPAA-B-K DAB05-PPCC-2-A DAB05-PPCC-2-M PD05P-ARS-PAA-B PD05P-ARS-PCC-B PD05P-ARS-PCC-B 104390-2 104390-2 104390-2 ------------- 95189 ----95189 [P] DAB05-PPCC-2-N DAB05-PPCC-B-J DAB05-PPCC-B-M DAB05-PPTT-2-A DAB05-PPUU-2-A DAB05-PPUU-2-C DAB05-PPUU-2-F DAB05-SSTT-2-A DAB05-SSTT-2-H PD05P-ARS-PCC-B PD05P-ARS-PCC-B PD05P-ARS-PCC-B PD05P-ARS-PTT-B PD05P-ARS-PUU-B PD05P-ARS-PUU-B PD05P-ARS-PUU-B PD05R-ASS-STT-B PD05R-ASS-STT-B 104390-2 104390-2 104390-2 104390-2 104390-2 104390-2 ----104390-2 ----- ------------------------P39124-600 ----P39124-600 95189 95189 95189 --------95189 95189 --------- [P] [P] [P] [A] [A] [A] [P] [P] [P] [P] [P] ----621518-10 ----621520-10 --------------------621515-10 621515-10 ----- [B] [B] [E] [E] Dispensing Valve [Mtl] --------77617-Z / 95183 [A / B / C] 635129-Z [A / B / Br / Z] 621524-10 [B / C] ----------------------------- 621514-10 ----- [E] 95199 ----621523-10 621517-10 621516-10 ------------621519-10 621519-10 --------- [B] [B] ----635129-Z 621523-10 ------------------------- [Vy] [Vy] [P / SS / V] [B / C] [A / B / Br / Z] [B / C] PARTS LIST / LISTA DE PIEZAS / LISTE DES PIECES Item Elem. Art. Description (size) Descripción (tamaño) Description (taille) Qty Cant. Quan. Part No. Número Numero [Mtl] 1 Diaphragm Pump Assembly (1) see chart --- 2 Lockout Valve / Piggyback Fil. - Reg. (1) see chart --- 3 Nipple (1/4 - 18 N.P.T. x 7/8”) (1) Y27-2-C [I] 4 Hose Fitting (1/2 - 14 N.P.T.) (1) see chart --- 5 Hex Cap Screw (1/4” - 20 x 1”) (4) Y6-45-T 6 Washer (9/32” i.d. x 5/8” o.d.) (4) 7 Nut (1/4” - 20) Item Elem. Art. Description (size) Descripción (tamaño) Description (taille) Part No. Número Numero [Mtl] (1) 95184 [P] (1) 95185 [SS] 13 Thumb Screw (1/4” - 20 x 1”) (2) 95948576 [SS] 14 Nut (1/4” - 20) (2) Y12-4-S [SS] [SS] 15 Clamp Plate (2) 95054 [SS] 93096 [SS] 16 Bung Adapter (models DAB05-AXXX-X-X) (1) 95033-4 [A] (4) 93828 [SS] (models DAB05-PXXX-X-X) (1) 95033-1 [P] 8 Gasket (models DAB05-XXAA-X-X) (1) 95006-4 [E] (models DAB05-SXXX-X-X) (1) 95033-5 [SS] (models DAB05-XXCC-X-X) (1) 95006-1 [B] 17 Baseplate (models DAB05-AXXX-X-X) (1) 95032-6 [A] (models DAB05-XXTT-X-X) (1) 95006-2 [V] (models DAB05-PXXX-X-X) (1) 95032 [P] (models DAB05-XXUU-X-X) (1) 95006-1 [B] (models DAB05-SXXX-X-X) (1) 95032-7 [SS] 18 Nipple (1/2 - 14 N.P.T.F.)(DAB05-PXXX only) (1) 95076-1 (models DAB05-XXAA-B-X) (1) 95201 [E] 19 Seal (models DAB05-PXXX-X-X) (1) 95074 (models DAB05-XXCC-B-X) (1) Y325-117 [B] (1) Y327-117 [V] 9 ‘‘O” Ring (3/32” x 1” o.d.) g K (included in optional foot valve kit) / (incluidos en el juego optativo de válvula de aspiración) / (inclus avec la trousse optionnelle de la soupape au pied) 10 Ball (0.750” dia.)(models DAB05-XXAA-B-X) (models DAB05-XXCC-B-X) g K (included in optional foot valve kit) / (incluidos en el juego optativo de válvula de aspiración) / (inclus avec la trousse optionnelle de la soupape au pied) 12 Suction Tube (models DAB05-PXXX-X-X) Qty Cant. Quan. (DAB05-AXXX-X-X and DAB05-SXXX-X-X) [P] [UH] (1) 95198 [V] 20 Retaining Ring (1) 95124 [SS] 21 Washer (1) 95005 [SS] (DAB05-AXXX-X-X and DAB05-SXXX-X-X) Items Not Shown / No Mostrado / Non Illustré (1) 93100-E [Sp] 22 Hose Assembly (1) see chart --- (1) 93100-2 [B] 23 Dispensing Valve (1) see chart --- (1) 93100-3 [V] 24 Swivel (models DAB05-XXXX-X-K only) (1) 95200 [P] K Items included in Foot Valve Kit 637336 Incluidos en el juego de válvula de aspiración Iinclus avec la trousse de la soupape au pied 11 Foot Valve Body g (models DAB05-APXX-B-X) (1) 95182 [SS] K (models DAB05-PPXX-B-X) (1) 95181 [P] g Items included in Foot Valve Kit 637337 Incluidos en el juego de válvula de aspiración Iinclus avec la trousse de la soupape au pied Hytrel and Viton are registered trademarks of the DuPont Company Santoprene is a registered trademark of Monsanto Company, licensed to Advanced Elastomer Systems, L.P. Hytrel y Viton son marca registrada de DuPont Company Santoprene es una marca registrada de Monsanto Company, usuario autorizado Advanced Elastomer Systems, L.P. Hytrel et Viton sont marque déposée de la société DuPont Santoprene est une marque déposée de Monsanto Company, fabriqué sous licence par Advanced Elastomer Systems, L.P. Page 2 of 4 DAB05-XXXX-X-X PARTS LIST / LISTA DE PIEZAS / LISTE DES PIECES / DAB05-XXXX-X-X 20 19 21 4 Models DAB05-A XXX-X-X and DAB05-S XXX-X-X Modelos DAB05-A XXX-X-X y DAB05-S XXX-X-X Modèles DAB05-A XXX-X-X et DAB05-S XXX-X-X 3 2 19 Models DAB05-P XXX-X-X Modelos DAB05-P XXX-X-X Modèles DAB05-P XXX-X-X 5 6 1 7 18 15 14 17 13 16 8 MATERIAL CODE / CÓDIGO DEL MATERIAL / CODE DE MATERIAU [A] = Aluminum / Aluminio / Aluminium [B] = Nitrile / Nitrile / Nitrile [Br] = Brass / Latón / Laiton [C] = Carbon Steel / Acero al Carbón / Acier au Carbone [E] = E.P.R. / E.P.R. / E.P.R. [I] = Iron / Hierro / Fer [P] = Polypropylene / Polipropileno / Polypropylène [Sp] = Santoprene / Santoprene / Santoprene [SS] = Stainless Steel / Acero inoxidable / Acier inoxydable [UH] = UHMW-PE / UHMW-PE / UHMW-PE [V] = Viton / Viton / Viton [Vy] = Vinyl / Vinilo / Vinyle [Z] = Zinc / Zinc / Zinc DAB05-XXXX-X-X 12 9 10 11 Page 3 of 4 LEA CUIDADOSAMENTE ESTE MANUAL ANTES DE INSTALAR ESTE EQUIPO, OPERARLO O REALIZARLE SERVICIO. El empresario tiene la responsabilidad de poner esta información en manos de los operarios. Guárdela como referencia en el futuro. LIRE ATTENTIVEMENT CE MANUEL AVANT D’INSTALLER, D’UTILISER OU DE REPARER CET APPAREIL. Il incombe à l’employeur de s’assurer que ces informations seront lues par l’opérateur. Conserver pour toute référence ultérieure. JUEGOS DE SERVICIO 104302 para reparar el filtro / regulador superpuesto P39124-600. 637334 para reparar la boquilla surtidora 95199. 637335 para reparar la espita de aceite 95183. CUADRO DE DESCRIPCIÓN DEL MODELO KITS D’ENTRETIEN 104302 pour réparer le filtre régulateur P39124-600. 637334 pour réparer la buse de distribution 95199. 637335 pour réparer le fausset d’huile 95183. TABLEAU DES DESCRIPTIONS DE MODELES DAB05 - X X X X - X - X Capuchón del Fluido y del Material del Tubo Múltiple A - Aluminio P - Polipropileno S - Acero inoxidable Couvercle et Collecteur de Liquide A - Aluminium P - Polypropylène S - Acier inoxydable Materiau de Siege P - Polypropylène S - Acier inoxydable Material del Asiento P - Polipropileno S - Acero inoxidable Material de la Bola A - Santoprener C - Hytrelr Matériau de Bille A - SantopreneR C - HytrelR T - PTFE U - Polyurethane Longueur de Tube D’aspiration 2 - 55 Gallons B - 55 Gallons avec soupape au pied Sección de Tubo de Succión 2 - 55 Galones B - 55 Galones con válvula de aspiración Accesorios de Salida del Fluido A - No hay accesorio de salida B - Manguera de 10’ (3 m) E.P.D.M. (M.D.E.P.) (para la bomba de polipropileno) C - Manguera de vinilo de 10’ (3 m) (para la bomba de polipropileno) D - Desviador de aceite (para bombas de aluminio) E - Manguera de 10’ (3 m) E.P.D.M. (M.D.E.P.), Filtro / regulador superpuesto (para la bomba de polipropileno) F - Manguera de vinilo de 10’ (3 m), Filtro / regulador superpuesto (para la bomba de polipropileno) G - No hay accesorio de salida, Filtro / regulador superpuesto (para bombas de aluminio) H - No hay accesorio de salida, Filtro / regulador superpuesto (para bomba de acero inoxidable) J - Manguera de nitrilo de 10’ (3 m) con delantal para el radiador (para la bomba de polipropileno) K - Manguera de 10’ (3 m) E.P.D.M. (M.D.E.P.), válvula surtidora de polietileno (para la bomba de polipropileno) L - Manguera de nitrilo de 10’ (3 m) con delantal para el radiador (para bombas de aluminio) M - Manguera de nitrilo de 10’ (3 m) con boquilla contra derrames (para la bomba de polipropileno) N - Manguera de nitrilo de 10’ (3 m) (para la bomba de polipropileno) O - Manguera de nitrilo de 10’ (3 m) (para bombas de aluminio) P - Manguera de nitrilo de 10’ (3 m) con boquilla contra derrames (para bombas de aluminio) DATOS DIMENSIONALES (Véase la figura 1) “B” 8-5/32” (207 mm) 8-3/32” (206 mm) 8-3/32” (206 mm) T - PTFE U - Polyurethane Matériau de Diaphragme A - Santoprene T - PTFE C - Hytrel U - Polyurethane Material del Diafragma A - Santoprene T - PTFE C - Hytrel U - Polyurethane NÚMERO DE MODELO “A” DAB05-AXXX-X-X 9-31/32” (253 mm) DAB05-PXXX-X-X 12-1/32” (306 mm) DAB05-SXXX-X-X 7-3/4” (197 mm) DAB05 - X X X X - X - X “C” 51-5/32” (1299 mm) 50-5/32” (1274 mm) 49-25/32” (1264 mm) Accessoires de Sortie du Liquide A - Aucun accessoire de sortie B - 10 pi de tuyau EPDM (pour la pompe en polypropylène) C - 10 pi de tuyau de vinyle (pour la pompe en polypropylène) D - Taraudeuse à huile (pour la pompe en aluminium) E - 10 pi de tuyau EPDM, filtre régulateur (pour la pompe en polypropylène) F - 10 pi de tuyau de vinyle, filtre régulateur (pour la pompe en polypropylène) G - Aucun accessoire de sortie, filtre régulateur (pour la pompe en aluminium) H - Aucun accessoire de sortie, filtre régulateur (pour la pompe en acier inoxydable) J - 10 pi de tuyau de nitrile avec croisillon de radiateur (pour la pompe en polypropylène) K - 10 pi de tuyau EPDM, soupape de distribution en poly (pour la pompe en polypropylène) L - 10 pi de tuyau de nitrile avec croisillon de radiateur (pour la pompe en aluminium) M - 10 pi de tuyau de nitrile avec extrémité sans égouttement (pour la pompe en polypropylène) N - 10 pi de tuyau de nitrile (pour la pompe en polypropylène) O - 10 pi de tuyau de nitrile (pour la pompe en aluminium) P - 10 pi de tuyau de nitrile avec extrémité sans égouttement (pour la pompe en aluminium) DONNÉES DIMENSIONNELLES (Voir la figure 1) NUMERO DE MODELES “A” DAB05-AXXX-X-X 9-31/32” (253 mm) DAB05-PXXX-X-X 12-1/32” (306 mm) DAB05-SXXX-X-X 7-3/4” (197 mm) “B” 8-5/32” (207 mm) 8-3/32” (206 mm) 8-3/32” (206 mm) “C” 51-5/32” (1299 mm) 50-5/32” (1274 mm) 49-25/32” (1264 mm) PN 97999-1191 Page 4 of 4 DAB05-XXXX-X-X
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

ARO ARO DAB05- PPAA-B-A Manual de usuario

Tipo
Manual de usuario