2. Ordenadores
  3. Televisores
  4. Televisores LCD
  5. Samsung
  6. PS50A558S1F
PS50A558S1F

Samsung PS50A558S1F Manual de usuario

  • ¡Hola! Soy un chatbot de IA específicamente entrenado para ayudarte con el Samsung PS50A558S1F Manual de usuario. He revisado el documento y puedo ayudarte a encontrar la información que necesitas o explicarla de manera clara y sencilla. ¡Pregunta lo que necesites!
imagine the possibilities
Plasma TV
user manual
BN68-01427A-00
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.
Country
Customer Care Centre
Web Site
AUSTRIA 0800-SAMSUNG(726-7864) www.samsung.com/at
BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be
CZECH REPUBLIC
844 000 844 www.samsung.com/cz
Distributor pro Českou republiku:
Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4
DENMARK 70 70 19 70 www.samsung.com/dk
EIRE 0818 717 100 www.samsung.com/ie
ESTONIA 800-7267 www.samsung.ee
FINLAND 030-6227 515 www.samsung.com/fi
FRANCE
"3260 SAMSUNG (€ 0,15/Min)
08 25 08 65 65 (€ 0,15/Min)"
www.samsung.com
GERMANY 01805 - SAMSUNG(726-7864 € 0,14/Min) www.samsung.com
HUNGARY 06-80-SAMSUNG(726-7864) www.samsung.com
ITALIA 800-SAMSUNG(726-7864) www.samsung.com
KAZAKHSTAN 8-10-800-500-55-500 www.samsung.kz
KYRGYZSTAN 00-800-500-55-500 -
LATVIA 800-7267 www.samsung.com/lv
LITHUANIA 8-800-77777 www.samsung.lt
LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be
NETHERLANDS 0900-SAMSUNG (726-7864 € 0,10/Min) www.samsung.com/nl
NORWAY 815-56 480 www.samsung.com/no
POLAND
"0 801 801 881
022-607-93-33"
www.samsung.com/pl
PORTUGAL 80820-SAMSUNG(726-7864) www.samsung.com/pt
RUSSIA 8-800-555-55-55 www.samsung.com
SLOVAKIA 0800-SAMSUNG(726-7864) www.samsung.com/sk
SPAIN 902 10 11 30 www.samsung.com
SWEDEN 0771-400 200 www.samsung.com/se
SWITZERLAND 0800-SAMSUNG(726-7864) www.samsung.com/ch
TURKEY 444 77 11 www.samsung.com
TADJIKISTAN 8-10-800-500-55-500 -
U.K 0845 SAMSUNG (7267864) www.samsung.com
UKRAINE 8-800-502-0000 www.samsung.com
UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/global/register
Model Serial No.
BN68-01427A-Eng.indb 1 2008-03-10 오후 3:13:58
English - 2
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
User Instructions
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the
plasma monitor panel for more than 2 hours as it can cause screen image retention. This image
retention is also known as “screen burn”. To avoid such image retention, reduce the degree of
brightness and contrast of the screen when displaying a still image.
Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place
over 2000m in height so do not install and operate there.
Heat on the top of the PDP TV
The top side of the product may be hot after long period of use as heat dissipates from the panel
through the vent hole in the upper part of the product. This is normal and does not indicate any defect
or operation failure of the product. However, children should be prevented from touching the upper
part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding
environment such as temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require
sophisticated technology to produce. However, there may be few bright or dark pixels on the screen.
These pixels will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 5°C(41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the PDP TV in 4:3 format for a long period of time may leave traces
of borders displayed on the left, right and centre of the screen caused by the
difference of light emission on the screen. Playing a DVD or a game console
may cause similar effect to the screen. Damages caused by the above effect are
not covered by the Warranty.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may
produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when
displaying still images.
Warranty
- Warranty does not cover any damage caused by image retention.
- Burn-in is not covered by the warranty.
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy
dust, high or low temperatures, high humidity, chemical substance and where it operates continually
such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.
Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2)
digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive
DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be
available in some countries.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre. (See back cover for more informations.)
BN68-01427A-Eng.indb 2 2008-03-10 오후 3:13:59
English - 3
Symbols
Press
Important
Note
Contents
General Information
User Instructions ............................................. 2
Checking Parts ................................................ 4
Using the Stand-Base ..................................... 4
Control Panel ................................................. 5
Connection Panel ............................................ 6
Viewing the Remote Control ........................... 8
Operation
Switching Your Television On and Off ............. 9
Viewing the Menus .......................................... 9
Plug & Play Feature ...................................... 10
Using the TOOLS Button .............................. 12
Viewing External Signal Sources .................. 12
Editing Device Names ................................... 13
Channel Control
Storing Channels Automatically .................... 13
Storing Channels Manually ........................... 14
Adding / Locking Channels ........................... 15
Sorting the Stored Channels ......................... 16
Assigning Names to Channels ...................... 16
Fine Tuning Channel Reception .................... 17
LNA (Low Noise Amplier) ............................ 17
Picture Control
Changing the Picture Standard ..................... 18
Customizing the Picture Settings .................. 18
Conguring Detailed Settings on the Picture
.... 19
Picture Options .............................................20
Resetting the Picture Settings to the Factory
Defaults ......................................................... 22
Sound Control
Sound Features ............................................23
Selecting the Sound Mode
(depending on the model) ............................. 24
Connecting Headphones (Sold separately) .. 24
Function Description
Time Features ............................................... 25
Language / Light Effect / Melody /
Entertainment / Energy Saving / PIP ............ 26
PC Display
Setting up Your PC Software
(Based on Windows XP) ............................... 28
Input Mode (PC) ............................................ 29
Setting the PC ............................................... 30
Using the DTV Feature
Previewing the DTV Menu System ............... 31
Displaying Programme Information ............... 32
Operating the DTV Menu .............................. 33
WISELINK
Using the WISELINK Function ...................... 43
Using the WISELINK Menu ........................... 44
Using the PHOTO (JPEG) List ...................... 45
Using the MP3 List ........................................ 48
Using the Setup Menu .................................. 49
About Anynet
+
What is Anynet
+
? .......................................... 51
Connecting Anynet
+
Devices ........................ 51
Setting Up Anynet
+ ....................................... 52
Scanning and Switching between
Anynet
+
Devices ........................................... 52
Recording ...................................................... 53
Listening through a Receiver ........................ 54
Check Points before Requesting Service ..... 54
Appendix
Teletext Feature (depending on the model) .. 55
Wall Mount Kit Specications (VESA) ........... 57
Wall- mount adjustment (Sold separately) .... 58
How to assemble the Stand-Base
(depending on the model) ............................. 59
Troubleshooting ............................................60
Specications ................................................ 61
English
BN68-01427A-Eng.indb 3 2008-03-10 오후 3:14:00
English - 4
Checking Parts
Owner’s Instructions Remote Control/
AAA Batteries
Power Cord Cloth-Clean Warranty Card/
Registration Card/
Safety Guide Manual
Cover-Bottom / Screws (2ea)
(Refer to page 59)
Ferrite Core for
Power Cord
Ferrite Core for
S-Video
Ferrite Core for
Component
Sold Separately
Antenna Cable Component Cables Audio Cables PC Cable
Scart Cable PC Audio Cable HDMI Cable HDMI/DVI Cable
Ferrite Core (Power Cord, S-Video, Component)
The ferrite cores are used to shield the cables from
interference.
When connecting a cable, open the ferrite core and clip it
around the cable near the plug.
Using the Stand-Base

Two or more people should carry
the PDP. Never lay the PDP on the
floor because of possible damage
to the screen. Always keep the
PDP upright.
The PDP can rotate 20 degrees in
right and left directions.
-20° ~ 20°
BN68-01427A-Eng.indb 4 2008-03-10 오후 3:14:05
English - 5
Control Panel
1
SOURCE
Toggles between all the available input sources
(TV, Ext.1, Ext.2, AV, S-Video, Component, PC,
HDMI1, HDMI2, HDMI3, DTV).
In the on-screen menu, use this button as
you would use the ENTER button on the
remote control.
2
MENU
Press to see an on-screen menu of your TV’s
features.
3
– +
Press to increase or decrease the volume. In
the on-screen menu, use the – + buttons
as you would use the ◄ and ► buttons on the
remote control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you would use the ▲ and ▼ buttons
on the remote control.
5
Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
6
POWER
Press to turn the TV on and off.
7
Remote Control Sensor
Aim the remote control towards this spot on the
TV.
8
Speakers
The product colour and shape may vary depending on the model.
Front Panel
BN68-01427A-Eng.indb 5 2008-03-10 오후 3:14:06
English - 6
Connection Panel
Continued...
Whenever you connect an audio or video system to your set, ensure that all elements are
switched off.
When connecting an external device, match the colour of the connection terminal to the cable.
1
POWER IN
Connect the supplied power cord.
2
COMPONENT IN
Audio (AUDIO L/R) and video (Y/P
B/PR) inputs
for Component.
3
PC IN(PC) / (AUDIO)
Connect to the video and audio output jack on
your PC.
4
EXT 1, EXT 2
Inputs or outputs for external devices, such as
VCR, DVD, video game device or video disc
players.
Input/Output Specification
Connector
Input Output
Video Audio(L/R) RGB
Video + Audio(L/R)
EXT 1
Only TV or DTV
output is available.
EXT 2
Output you can
choose.
5
DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
6
Connecting external Audio Devices
Connect RCA audio signals from the TV to an
external source, such as Audio equipment.
7
SERVICE
− Connector for service.
− Connect the serial jack between the
electro-motion wall mount bracket and your
TV when you want to adjust the TV viewing
angle using your remote control.
Rear Panel
The product colour and shape may vary depending on the model.
Cable Television
Network
or
or
1
432 6 85
9
7
BN68-01427A-Eng.indb 6 2008-03-10 오후 3:14:12
English - 7
8
HDMI IN 1,2
− No additional Audio connection is needed
for an HDMI to HDMI connection.
- When using an HDMI/DVI cable connection,
you must use the HDMI IN 2 jack.

What is HDMI?
- “High Definition Multimedia interface”
allows the ansmission of high definition
digital video data and multiple channels
of digital audio.
- The HDMI/DVI terminal supports DVI
connection to an extended device with
the appropriate cable (not supplied).
The difference between HDMI and DVI
is that the HDMI device is smaller in
size, has the HDCP (High Bandwidth
Digital Copy Protection) coding feature
installed, and supports multi - channel
digital audio.
DVI IN (HDMI 2) AUDIO R/L
DVI audio outputs for external devices.
9
ANT IN
75Ω Coaxial connector for Aerial/Cable
Network.
Supported modes for HDMI/DVI and Component
480i 480p 576i 576p 720p 1080i
1080p
HDMI/DVI 50Hz X X X O O O O
HDMI/DVI 60Hz X O X X O O O
Component O O O O O O O
The product colour and shape may vary depending on the model.
Side Panel
or
1
COMMON INTERFACE Slot
Insert CI (Common Interface) card into the slot.
(refer to page 42)
−
When ‘CI Card’ isn’t inserted in some
channels, “Scramble Signal” is displayed on
the screen.
− The pairing information containing a
telephone number, CI CARD ID, Host ID,
and other information will be displayed in
about 2~3 minutes. If an error message
is displayed, please contact your service
provider.
− When the channel information configuration
has finished, the message “Updating
Completed” is displayed, indicating that the
channel list is now updated.

Insert the CI-Card in the direction marked
on it.
2
HDMI IN 3
Connect to the HDMI jack of a device with
HDMI output.
3
WISELINK
Connect a USB mass storage device to view
photo files (JPEG) and play audio files (MP3).
4
S-VIDEO or VIDEO / AUDIO L/R
Video (S-Video or Video) and audio inputs
for external devices, such as a camcorder or
VCR.
5
Headphones jack
You can connect a set of headphones if you
wish to watch a television programme without
disturbing the other people in the room.

Prolonged use of headphones at a high
volume may damage your hearing.
5
2
4
1
3
BN68-01427A-Eng.indb 7 2008-03-10 오후 3:14:15
English - 8
Viewing the Remote Control
The performance of the remote control may be affected by bright light.
1
POWER button
(turns the TV on and off)
2
Selects the TV and DTV
mode directly
3
Number buttons for direct
channel access
4
One/Two-digit channel
selection
5
Temporary sound switch-off
6
Volume increase
Volume decrease
7
Electronic Program Guide
(EPG) display
8
Use to quickly select
frequently used functions.
9
Control the cursor in the
menu
0
Use to see information on
the current broadcast
#
Press to select the optional
display and sound modes for
sports, cinema and games.
$
VCR/DVD Function (Rewind,
Stop, Play/Pause, Fast/
Forward)
%
Available source selection
^
Previous channel
&
Next channel
Previous channel
*
Displays the main on-screen
menu
(
This function enables you to
view and play photo (JPEG)
and audio files (MP3) from
an external device. (See
page 45 (JPEG), 48 (MP3))
)
Returns to the previous
menu
a
Exit the on-screen menu
b
Picture size selection
c
Use this when connecting
a SAMSUNG DMA (Digital
Media Adapter) device
through an HDMI interface
and switching to DMA mode.
(The DMA button is optional.)
For more information on the
operating procedures, refer
to the user manual of the
DMA. This button is available
when “Anynet+(HDMI-CEC)"
is “On” (see page 52)
d
Digital subtitle display
e
Channel control button
(Refer to page 15)
Teletext Functions
(Refer to page 55)
2
Exit from the teletext display
(depending on the model)
7
Teletext store
8
Teletext size
0
Teletext reveal
!
Fastext topic selection
@
Teletext display/mix both
teletext information and the
normal broadcast
%
Teletext mode selection
(LIST/FLOF)
^
Teletext sub page
&
P :Teletext next page
P :Teletext previous page
*
Teletext index
)
Teletext hold
a
Teletext cancel
Continued...
BN68-01427A-Eng.indb 8 2008-03-10 오후 3:14:17
English - 9
Installing Batteries in the Remote Control
1 Lift the cover at the back of the remote control upward as
shown in the figure.
2 Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the
batteries with the diagram inside the compartment.
Do not mix battery types, i.e. alkaline and manganese.
3 Close the cover as shown in the figure.

Remove the batteries and store them in a cool and dry
place if you won’t be using the remote control for a long
time. The remote control can be used up to about 23 feet
from the TV. (Assuming typical TV usage, the batteries last
for about one year.)

If the remote control doesn’t work! Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
Switching Your Television On and Off
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2 Press the (Power) button (On/Off) on the front of the television or press the POWER button on
the remote control to switch the television on. The channel that you were watching last is re-selected
automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing
Channels Automatically” on page 13 or “Storing Channels Manually” on page 14.

If the television is initially powered on, several basic customer settings proceed automatically.
Refer to “Plug & Play Feature” on page 10.
3 To switch the television off, press the (Power) button (On/Off) on the front of the television or press
the POWER button on the remote control.
4 To switch the TV on, press the (Power) button (On/Off) on the front of the TV or press the POWER
button or number buttons on the remote control.
Viewing the Menus
1 Press the MENU button.
The main menu is displayed on the screen.
Its left side has six icons: Picture, Sound, Channel, Setup,
Input, and Digital Menu.
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected items.
Press the RETURN button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
Move
Enter
Exit
Mode : Standard
Cell Light 7
Contrast 80
Brightness 45
Sharpness 50
Colour 50
Tint G50 R50
Detailed Settings
More
Picture
T V
BN68-01427A-Eng.indb 9 2008-03-10 오후 3:14:19
English - 10
Plug & Play Feature
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
If you accidentally select the wrong country for your TV, the
characters on the screen may be wrongly displayed.
Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial
signals are broadcasted. Please confirm with your local
dealer if you can receive DVB-T signals. Although this TV set
follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not
guaranteed. Several functions may not be available in some
countries.
1 If the television is in standby mode, press the POWER button
on the remote control. The message Start Plug & Play is
displayed. Press the ENTER button.
2 The Language menu will automatically appear after several
seconds.
3 Select the appropriate language by pressing the ▲ or ▼
button.
Press the ENTER button. The message Select ‘Home Use’
when installing this TV in your home. is displayed.
4 Press the ◄ or ► button to select Store Demo or Home Use,
then press the ENTER button. The message to check the
connected status of the antenna is displayed.

The default selection is Home Use.

We recommend setting the TV to Home Use mode for the
best picture in your home environment.

Store Demo mode is only intended for use in retail
environments.

If the unit is accidentally set to Store Demo mode and you
want to return to Home Use (Standard): Press the Volume
button. When the volume OSD is displayed, press and
hold the MENU button for 5 seconds.
5 Make sure that the antenna is connected to the TV.
Press the ENTER button. The Country menu is displayed.
6 Select your country or area by pressing the ▲ or ▼ button.
Press the ENTER button.
The message Some DTV functions may not be available.
Digital Scan? is displayed.

This function is supported for all countries except for the
following countries: France, Germany, Italy, Netherlands,
Spain, Switzerland, United Kingdom, Austria.
If your country supports the DTV functions, the message is
not displayed. Then you can follow the instructions from step
12
. When the local service provider does not support DTV
broadcasting but you choose a DTV supporting country, it
enters the DTV Plug & Play but DTV functions may not work
properly.When No is selected, follow the instructions from step
7 to 10. When Yes is selected, follow the instructions from
step 11.
Continued...
Plug & Play
Start Plug & Play.
OK
Enter
Plug & Play
Language
Move
Enter
English
Deutsch
Français
Italiano
▼
Plug & Play
Select ‘Home Use’
when installing this TV in your home.
Move
Enter
Store Demo Home Use
Plug & Play
Check antenna input.
Enter
OK
Plug & Play
Country
Move
Enter
▲
United Kingdom
Austria
Eastern Europe
Others
Plug & Play
Some DTV functions may not be available.
Digital Scan?
Move
Enter
Skip
Yes No
Plug & Play
P 1 C -- 40 MHz
0 %
Enter
Skip
Start
BN68-01427A-Eng.indb 10 2008-03-10 오후 3:14:20
English - 11
Plug & Play
0%
Services found: 0 Channel:
-
Enter
Skip
Start
Plug & Play
Scanning for digital services...
29%
Services found: 6 Channel: 35
Enter
Skip
Stop
OK
Enjoy your viewing
Move
Enter
Return
Plug & Play
Language : English
Time
Light Effect
:
In Watching TV
Auto Wall-Mount
Melody : Off
Entertainment
: Off
Energy Saving :
Off
PIP
Setup
T V
7 Select No pressing the ◄ or ► button, then press the ENTER
button. Auto Store menu is displayed.
8 Press the ENTER button to start search the channels. The
channel search will start and end automatically. After all the
available channels are stored, Clock Set menu is automatically
displayed. Press the ENTER button.

To stop the search before it has finished, press the
ENTER button with Stop selected.
9 Press the ◄ or ► button to select Month, Day, Year, Hour, or
Minute. Set these by pressing the ▲ or ▼ button.

You can set the Month, Day, Year, Hour, or Minute
directly by pressing the numeric buttons on the remote
control.
10 Press the ENTER button to confirm your setting. The message
Enjoy your viewing is displayed. When you have finished,
press the ENTER button.

Even if the ENTER button is not pressed, the message will
automatically disappear after several seconds.
11 Select Yes pressing the ◄ or ► button, then press the
ENTER button. Auto Store menu is displayed.
12 Press the
ENTER button to start search the analog channels.
The analog channel search will start and end automatically.
After all the available analog channels are stored, the screen
for searching digital channels is automatically displayed.

To stop the search before it has finished, press the
ENTER button with Stop selected.
13 Press the
ENTER button to start search the digital channels.
The digital channel search will start and end automatically.
After all the available digital channels are stored, the screen to
select a time zone is displayed depending on the country.

To stop the search before it has finished, press the
ENTER button with Stop selected.

If the DTV channel is updated, the Source in the source
list of the Input menu is automatically changed to DTV.

For detailed descriptions about DTV channel update, refer
to page 33 of this manual.
14 Press the ▲ or ▼ button to select required time zone, then
press the ENTER button. The screen for setting the time is
displayed. Press the ENTER button.
15 Press the ◄ or ► button to select Month, Day, Year, Hour, or
Min. Set these by pressing the ▲ or ▼ button.

You can set the Month, Day, Year, Hour, or Min directly
by pressing the numeric buttons on the remote control.
16 Press the
ENTER button to confirm your setting. The message
Enjoy your viewing is displayed. When you have finished,
press the ENTER button.

Even if the ENTER button is not pressed, the message will
automatically disappear after several seconds.
If you want to reset this feature …
1
Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Press the ENTER button again to select Plug & Play.
The message Start Plug & Play is displayed.
Plug & Play
Set the current time.
Adjust
Move
Enter
Skip
15
Month Day Year
Hour Min
2008
12 00
01
Plug & Play
Move
Select
Skip
The Iberian Peninsula and Balears Islands
Canarian Islands
<Spain only>
Plug & Play
Clock Set
Move
Adjust
Enter
15
Month Day Year
Hour Min
2008
12 00
01
BN68-01427A-Eng.indb 11 2008-03-10 오후 3:14:22
English - 12
Viewing External Signal Sources
You can switch between viewing signals from connected
equipment, such as a VCR, DVD, Set-Top Box, and the TV
source (broadcast or cable).
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Input, then press the ENTER
button.
3 Press the ENTER button again to select Source List.
4 Press the ▲ or ▼ button to select the signal source, then press
the ENTER button.
Available signal sources:
TV, Ext.1, Ext.2, AV, S-Video,
Component, PC, HDMI1, HDMI2, HDMI3, DTV
You can choose only those external devices that are connected
to the TV.
You can select these options simply by pressing the SOURCE
button on the remote control.
To watch television programme again, press the TV/DTV button
and select the channel number required.
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The
“Tools” menu changes depending on which external input mode you are viewing.
1 Press the TOOLS button.
The Tools menu will appear.
2 Press the ▲ or ▼ button to select a menu, then press the
ENTER button.
3 Press the ▲/▼/◄/►/ENTER buttons to display, change, or
use the selected items.
For a more detailed description of each function, refer to the
corresponding page.
• Anynet+(HDMI-CEC), see page 52
• Picture Mode, see page 18
• Sound Mode, see page 23
• Sleep Timer, see page 25
• SRS TS XT, see page 23
• Energy Saving, see page 27
• Dual I-II, see page 24
Move
Enter
Return
Source List :
TV
Edit Name
Anynet + (HDMI-CEC)
WISELINK
Input
T V
Move
Enter
Return
TV
Ext.1 :−−−−
Ext.2 :−−−−
AV :−−−−
S-Video :−−−−
Component :−−−−
PC :−−−−
More
Source List
T V
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual I-II : Mono
Move
Enter
Exit
BN68-01427A-Eng.indb 12 2008-03-10 오후 3:14:24
English - 13
Editing Device Names
You can give a name to the external source.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Input, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Edit Name, then press the
ENTER button.
4 Press the ▲ or ▼ button to select the external source to be
edited, then press the ENTER button.
5 Select the required device by pressing ▲ or ▼, then press the
ENTER button.
Available device names:
VCR, DVD, Cable STB, Satellite
STB, PVR STB, AV Receiver, Game, Camcorder, PC, TV,
IPTV, Blu-Ray, HD DVD, DMA.
6 Press the EXIT button to exit.
Storing Channels Automatically
Not available in DTV or external input mode.
You can scan for the frequency ranges available to you
(availability depends on your country).
Automatically allocated programme numbers may not
correspond to actual or desired programme numbers.
However you can sort numbers manually and clear any
channels you do not wish to watch.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ENTER button again. The available countries are
listed.
4 Select your country by pressing the ▲ or ▼ button, then press
the ENTER button.

Even though you have changed the country setting in this
menu, the country setting for DTV is not changed. Use the
Plug & Play function to change the country setting for DTV.
(Refer to pages 10 to 11)
5 Press the ▲ or ▼ button to select Auto Store, then press the
ENTER button.
6 Press the ENTER button again to start the search.
The search will end automatically.

To stop the search before it has finished, press the MENU
or the ENTER button.
Move
Enter
Return
Source List :
TV
Edit Name
Anynet + (HDMI-CEC)
WISELINK
Input
T V
Move
Enter
Return
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA :
Off
Channel
T V
Auto Store
P 1 C -- 40 MHz
0 %
Enter
Return
Start
Move
Enter
Return
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA :
Off
Channel
▲
Switzerland
United Kingdom
Austria
Eastern Europe
Others
T V
Move
Enter
Return
Ext.1 :−−−−
Ext.2 : −−−−
AV :
S-Video :
Component : −−−−
PC : −−−−
HDMI1 :
HDMI2 : −−−−
HDMI3 :
−−−−
Edit Name
T V
−−−−
VCR
DVD
Cable STB
Satellite STB
PVR STB
AV Receiver
BN68-01427A-Eng.indb 13 2008-03-10 오후 3:14:25
English - 14
Storing Channels Manually
Not available in DTV or external input mode.
You can store television channels, including those received via
cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish
to identify.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Manual Store, then press
the ENTER button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
5 When you are satisfied with your setting, press the ENTER
button.
6 Press the EXIT button to exit.
Programme (Programme number to be assigned to a channel)
− Press the ▲ or ▼ button until you find the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
Colour System: Auto/PAL/SECAM/NTSC4.43
− Press the ▲ or ▼ button to select the required colour standard.
Sound System: BG/DK/I/L
− Press the ▲ or ▼ button to select the required sound standard.
Channel (When you know the number of the channel to be stored)
− Press the ▲ or ▼ button to select
C (Air channel) or S (Cable channel).
− Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, re-select the sound standard required.
Search (When you do not know the channel numbers)
− Press the ▲ or ▼ button to start the search.
− The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
− Set to
OK by pressing the ENTER button.
Channel mode
P (Programme mode): When completing tuning, the broadcasting stations in your area have
been assigned to position numbers from P00 to P99. You can select a channel by entering the
position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each
cable channel in this mode.
Move
Enter
Return
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA :
Off
Channel
T V
Move
Enter
Return
Programme :
P 1
Colour System : Auto
Sound System : BG
Channel : C
Search : 175 MHz
Store : ?
Manual Store
T V
BN68-01427A-Eng.indb 14 2008-03-10 오후 3:14:26
English - 15
Adding / Locking Channels
Not available in DTV or external input mode.
Using the Channel Manager, you can conveniently lock or add
channels.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Channel Manager, then
press the ENTER button.
Adding channels
Using the Channel List, you can add channels.
4 Select Channel List by pressing the ENTER button.
5 Move to the ( ) field by pressing the ▲/▼/◄/► buttons,
select a channel to be added, and press the ENTER button to
add the channel.

If you press the ENTER button again, the ( ) symbol next
to the channel disappears and the channel is not added.
Locking channels
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by muting out video
and audio.
6 Press the ▲ or ▼ button to select Child Lock, then press the ENTER
button.
7 Select On by pressing the ▲ or ▼ button, then press the ENTER
button.
8 Press the ▲ or ▼ button to select Channel List, then press the
ENTER button.
9 Move to the ( ) field by pressing the ▲/▼/◄/► buttons, select a
channel to be locked, and press the ENTER button.

If you press the ENTER button again, the ( ) symbol next to the
channel disappears and the channel lock is canceled.

A blue screen is displayed when Child Lock is activated.
10 Press the EXIT button to exit.

You can select these options simply by pressing the CH LIST
button on the remote control.
Move
Enter
Return
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA :
Off
Channel
T V
Move
Enter
Return
Channel List
Child Lock : Off
Channel Manager
T V
Channel List
P 1 C 6
1 / 10
▲
▼
Prog.
0
C 1
1 C 6
2 C 5
3 C 8
4 C 11
5 C 22
6 C 26
7 C 36
8 C 52
9 C 24
Add Lock
Move Enter
Page Return
BN68-01427A-Eng.indb 15 2008-03-10 오후 3:14:28
English - 16
Sorting the Stored Channels
Not available in DTV or external input mode.
This operation allows you to change the programme numbers
of the stored channels.
This operation may be necessary after using the auto store.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Sort, then press the
ENTER button.
4 Select the channel that you wish to move by pressing the
▲ or ▼ button, then press the ENTER button.
5 Select the number of the programme to which the channel is to
be moved by pressing the ▲ or ▼ button.
Press the ENTER button. The channel is moved to its new
position and all other channels are shifted accordingly.
6 Repeat steps 4 to 5 until you have moved all the channels to
the required programme numbers.
7 Press the EXIT button to exit.
Assigning Names to Channels
Not available in DTV or external input mode.
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Name, then press the
ENTER button.
4 Press the ▲ or ▼ button to select the channel to be assigned
to a new name, then press the ENTER button.
5 Press the ▲ or ▼ button to select a letter, a number, or a
symbol (Results in this sequence: A~Z, 0~9, +, -, *, /, blank).
Move on to the previous or next letter by pressing the ◄ or ►
button, then press the ENTER button.
6 Repeat steps 4 to 5 for each channel to be assigned to a new
name.
7 Press the EXIT button to exit.
Move
Enter
Return
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA :
Off
Channel
T V
Move
Enter
Return
Prog. Ch. Name
0 C- -
1 C04
2 C05
3 C08
4 C09
Sort
T V
Move
Enter
Return
Prog. Ch. Name
0 C-- −−−−−
1 C04 −−−−−
2 C05 −−−−−
3 C08 −−−−−
4 C09 −−−−−
Name
T V
Move
Enter
Return
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA :
Off
Channel
T V
BN68-01427A-Eng.indb 16 2008-03-10 오후 3:14:29
English - 17
Fine Tuning Channel Reception
Not available in DTV or external input mode.
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Fine Tune, then press the
ENTER button.
4 To obtain a sharp, and clear picture and good sound quality,
press the ◄ or ► button until you reach the optimal setting.
Press the ENTER button.

Fine Tune Store will change the colour of the Channel
OSD (On Screen Display) from White to Red and add the
“*” mark.

To reset the fine tuning to 0, select Reset by pressing the
▲ or ▼ button. Press the ENTER button.
5 Press the EXIT button to exit.
LNA (Low Noise Amplifier)
This function is very useful in the situation that the TV is used in weak signal.
LNA amplifies the TV signal in the weak signal area, a low-noise preamplifier boosts the incoming
signal.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select LNA, then press the ENTER
button.
4 Select Off or On by pressing the ▲ or ▼ button, then press
the ENTER button.
5 Press the EXIT button to exit.
Depending on areas, factory mode of LNA, will be set up as
On or Off.
Fine Tune
P 1
+ 3
Adjust
Save
Return
Reset
P 1 *
Mono
Picture : Dynamic
Sound : Custom
SRS TS XT : Off
−−
:
−−
Move
Enter
Return
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA :
Off
Channel
T V
Move
Enter
Return
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA :
Off
Channel
T V
BN68-01427A-Eng.indb 17 2008-03-10 오후 3:14:30
English - 18
Customizing the Picture Settings
Your television has several setting options that allow you to
control the picture quality.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ENTER button again to select Mode.
4 Select the required mode by pressing the ▲ or ▼ button, then
press the ENTER button.
Available modes:
Dynamic, Standard, Movie
5 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
6 When you are satisfied with your setting, press the ENTER button.
7 Press the EXIT button to exit.
Cell Light - Contrast – Brightness – Sharpness – Colour – Tint

In Analog TV, Ext., AV, S-Video modes of the PAL system, you cannot use the Tint Function.

In PC mode, you can only make changes to Cell Light, Contrast, and Brightness.
Press the ◄ or ► button until you reach the optimal setting.
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ENTER button again to select Mode.
4 Select the required mode by pressing the ▲ or ▼ button, then
press the ENTER button.
Available modes:
Dynamic, Standard, Movie

The settings values may vary depending on the input
source.
5 Press the EXIT button to exit.

Choose Dynamic for viewing the TV during the day or
when there is bright light in the room.
Choose Standard for general TV watching mode.
Choose Movie when viewing the movie.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Picture Mode.
3 Press the ◄ or ► button to select the required option.
Move
Enter
Return
Mode : Standard
Cell Light 7
Contrast 80
Brightness 45
Sharpness 50
Colour 50
Tint G50 R50
Detailed Settings
More
Picture
T V
Move
Enter
Return
Mode : Standard
Cell Light 7
Contrast 80
Brightness 45
Sharpness 50
Colour 50
Tint G50 R50
Detailed Settings
More
Picture
Dynamic
Standard
Movie
T V
Tools
Anynet+ (HDMI-CEC)
PictureMode ◄ Standard ►
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual I-II : Mono
Move Adjust
Exit
Move
Enter
Return
Mode : Standard
Cell Light 7
Contrast 80
Brightness 45
Sharpness 50
Colour 50
Tint G50 R50
Detailed Settings
More
Picture
T V
BN68-01427A-Eng.indb 18 2008-03-10 오후 3:14:31
English - 19
Configuring Detailed Settings on the Picture
You can set detailed picture settings.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ▲ or ▼ button to select Detailed Settings, then
press the ENTER button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
Available options:
Black Adjust, Dynamic Contrast,
Gamma, Colour Space, White Balance, Flesh Tone, Edge
Enhancement, xvYCC
5 When you are satisfied with your setting, press the ENTER
button.
6 Press the EXIT button to exit.

Detailed Settings is available in Standard or Movie mode.

In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance from among the
Detailed Settings items.
Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -3 ~ +3
You can adjust the middle brightness of pictures.
Press the ◄ or ► button until you reach the optimal setting.
Colour Space : Auto/Native/Custom
Colour space is a colour matrix composed of red, green and blue colours.
Select your favorite colour space to experience the most natural colour.
− Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on program
sources.
− Native: Native Colour Space offers deep and rich colour tone.
− Custom: Adjusts the colour range to suit your preference. (see “Customizing the Colour Space”)
Customizing the Colour Space
Colour: Red/Green/Blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference.
Colour is available when Colour Space is set to Custom.
Press the ▲ or ▼ button to select Red, Green, Blue, Yellow, Cyan or Magenta.
Press the ENTER button.
− Red/Green/Blue: In Colour, you can adjust the RGB values for the selected colour.
Press the ▲ or ▼ button to select Red, Green or Blue to change it. Press the ENTER button.
Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
− Reset: Resets the colour space to the default values.
White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Continued...
Move
Enter
Return
Black Adjust :
Off
Dynamic Contrast : Low
Gamma : 0
Colour Space : Native
White Balance
Flesh Tone : 0
Edge Enhancement
: On
xvYCC : Off
Detailed Settings
T V
Move
Enter
Return
Mode : Standard
Cell Light 7
Contrast 80
Brightness 45
Sharpness 50
Colour 50
Tint G50 R50
Detailed Settings
More
Picture
T V
BN68-01427A-Eng.indb 19 2008-03-10 오후 3:14:32
English - 20
Picture Options
You can set detailed picture settings.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ▲ or ▼ button to select Picture Options, then
press the ENTER button.
4 Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
5 When you are satisfied with your setting, press the
ENTER button.
6 Press the EXIT button to exit.

In PC mode, you can only make changes to the Colour Tone,
Size and Screen Burn Protection from among the items in
Picture Options.
Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2

When the picture mode is set to Dynamic or Standard,
Warm1 and Warm2 cannot be selected.
Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan
You can select the picture size which best corresponds to your
viewing requirements.
−
Auto Wide: Expanding and pulling up the picture from 4:3 to
16:9 ratio.
− 16:9
: Sets the picture to 16:9 wide mode.
−
Wide Zoom: Magnify the size of the picture more than 4:3.
Move the screen up/down using the ▲ or ▼ button after
selecting the by pressing the ► or ENTER button.
−
Zoom: Magnify the size of the picture vertically on screen.
− 4:3
: Sets the picture to 4:3 normal mode.
−
Just Scan: Use this function to see the full image
without any cutoff when HDMI(720p/1080i/1080p),
Component(1080i/1080p) or DTV(1080i) signals are input.
After selecting Just Scan in HDMI (1080i/1080p) or
Component (1080i/1080p) mode: Press the ◄ or ► button
to select , then press the ENTER button. Press the ▲, ▼, ◄ or ► button to move the picture
up, down, left and right. Reset: Press the ◄ or ► button to select Reset, then press the ENTER
button. You can initialize the setting.

With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off
or a specific colour appears on the screen.

For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p)
connection of 50 and 60Hz, only the input source is supported.

You can change the picture size simply by pressing the P.SIZE button on the remote control.

Depending on the input source, the picture size options may vary.

The items available may differ depending on the selected mode.

When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.

In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Continued...
Flesh Tone:-15~+15
You can emphasize the pink tone in the picture.
Press the ◄ or ► button until you reach the optimal setting.
Changing the adjustment value will refresh the adjusted screen.
Edge Enhancement: Off/On
You can emphasize object boundaries.
xvYCC: Off/On
Setting the xvYCC mode to On increases detail and colour space when watching movies from an
external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the
Picture Mode to Movie to enjoy this feature.
The xvYCC function works only in Component or HDMI(Y, Cb, Cr) mode.
Move
Enter
Return
Auto Wide
16:9
Wide Zoom
Zoom
4:3
Just Scan
Size
T V
Move
Enter
Exit
Mode : Standard
Cell Light 7
Contrast 80
Brightness 45
Sharpness 50
Colour 50
Tint G50 R50
Detailed Settings
More
Picture
T V
Move
Enter
Return
Colour Tone : Normal
Size : Auto Wide
Screen Mode : 16:9
Digital NR : Auto
DNle : On
HDMI Black Level : Normal
Movie Plus : Low
Blue only mode : Off
Screen Burn Protection
Picture Options
T V
BN68-01427A-Eng.indb 20 2008-03-10 오후 3:14:34
English - 21
Positioning and Sizing the screen using Zoom
− Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down direction
using the ▲ or ▼ button as well as the screen size.
− Move the screen up/down using the ▲ or ▼ button after selecting the by pressing the ◄ or ► button.
− Resize the screen vertically using the ▲ or ▼ button after selecting the by pressing the ◄ or ► button.
Screen Mode: 16:9/Wide Zoom/Zoom/4:3
When setting the picture size to Auto Wide in a 16:9 wide TV,
you can determine the picture size you want to see the 4:3
WSS (Wide Screen Service) image or nothing. Each individual
European country requires different picture size so this function
is intended for users to select it.
− 16:9
: Sets the picture to 16:9 wide mode.
−
Wide Zoom: Magnify the size of the picture more than 4:3.
−
Zoom: Magnify the size of the picture vertically on screen.
− 4:3
: Sets the picture to 4:3 normal mode.

This function is available in Auto Wide mode.

This function is not available in PC,Component or HDMI mode.
Digital NR: Off/Low/Medium/High/Auto
If the signal received by the television is weak, you can activate this feature to reduce any static and
ghosting that may appear on the screen.

This function is not available in PC mode.

When the signal is weak, select one of the other options until the best picture is displayed.
DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you
can view the difference in the visual quality.

DNIe
TM
(Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast
enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more
detailed image to you. DNIe
TM
technology will fit every signal into your eyes.

This function is not available in PC mode.

This function is available only in Dynamic mode.
HDMI Black Level: Normal/Low
Using this function, you can adjust the image quality when the screen burn (appearance of black
level, low contrast, low colour, etc.) is encountered by the HDMI input for RGB limited range (16 to
235).

This function is active only when the external input connects to HDMI(RGB signals).
Movie Plus: Off/Low/Medium/High/Demo
You can view more natural skin and clear text even in fast moving scenes.

This function is not available in PC mode.

The Wide Zoom, Zoom and Just Scan mode are not supported.
Blue Only Mode: Off/On
This function is for AV device measurement experts. This function displays the blue signal only by
removing the red and green signals from the video signal so as to provide a Blue Filter effect that is
used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal
level of each video device using the Red/Green/Blue/ Cyan/Magenta/ Yellow Colour Bar Patterns,
without using an additional Blue Filter.

Blue Only Mode is available when the picture mode is set to Movie or Standard.
Screen Burn Protection
To reduce the possibility of screen burn, this unit is equipped
with screen burn prevention technology. This technology
enables you to set picture movement up/down (Vertical Line)
and side to side (Horizontal Dot). The Time setting allows
you to program the time between movement of the picture in
minutes.
Continued...
Move
Enter
Return
Colour Tone : Normal
Size : Auto Wide
Screen Mode : 16:9
Digital NR :
DNle :
HDMI Black Level :
Movie Plus : Low
Blue only mode : Off
Screen Burn Protection
Picture Options
T V
16:9
Wide Zoom
Zoom
4:3
Move
Enter
Return
Pixel Shift
White
Scrolling
Side Gray : Dark
Screen Burn Protection
T V
BN68-01427A-Eng.indb 21 2008-03-10 오후 3:14:35
English - 22
− Pixel Shift: Using this function, you can minutely move
pixels on the PDP in horizontal or vertical direction to
minimize after image on the screen.
− Set
Pixel Shift to On by pressing the ▲ or ▼ button,
then press the ENTER button.
− Select the required option by pressing the ▲ or ▼
button, then press the ENTER button.
Available options:
Horizontal Dot, Vertical Line, Time

Optimum condition for pixel shift;
PC
TV/Ext/AV/Component/
HDMI/DTV
Horizontal Dot 4 4
Vertical Line 4 4
Timer (minute) 4 4 min

The Pixel Shift value may differ depending on the monitor size (inches) and mode.
−
White: This function helps remove after images on the screen by changing the colour of pixels
to white. Use this function when there are remaining after images or symbols on the screen
especially when you displayed a still image on the screen for a long time.
−
Scrolling: This function helps remove after images on the screen by moving all the pixels on the
PDP according to a pattern. Use this function when there are remaining after images or symbols
on the screen especially when you displayed a still image on the screen for a long time.
−
Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme left and right sides.
Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
Light: When you set the screen ratio to 4:3, it brightens the left and right sides.

To remove after images on the screen, use either White or Scrolling function. Although both of
the two functions remove after images on the screen, Scrolling is more effective.

The after image removal function has to be executed for a long time (approximately 1 hour) to
effectively remove after images on the screen. If after image is not improved after the execution
of the function, repeat the function again.

Press any button on the remote control to cancel this feature.
Resetting the Picture Settings to the Factory Defaults
You can set detailed picture settings.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ▲ or ▼ button to select Reset, then press the
ENTER button.
4 Press the ▲ or ▼ button to select OK or Cancel then press
the ENTER button.

Each mode can be reset.
Move
Enter
Return
More
Picture Options
Reset : OK
Picture
T V
OK
Cancel
Move
Enter
Return
Pixel Shift :
On
Horizontal Dot : 2
Vertical Line : 2
Timer : 2 min
Pixel Shift
T V
BN68-01427A-Eng.indb 22 2008-03-10 오후 3:14:36
English - 23
Sound Features
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Sound, then press the
ENTER button.
3 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
Available options:
Mode, Equalizer, SRS TS XT, Auto Volume,
TV Speaker, Sound Select
4 When you are satisfied with your setting, press the ENTER
button.
5 Press the EXIT button to exit.
Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used
when watching a given broadcast.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Sound Mode.
3 Press the ◄ or ► button to select the required option.
Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
The television has several settings which allow you to control
the sound quality.

If you make any changes to these settings, the sound
mode is automatically switched to Custom.
SRS TS XT: Off/On
TruSurround XT is a patented SRS technology that solves the
problem of playing 5.1 multichannel content over two speakers.
TruSurround delivers a compelling, virtual surround sound experience through any two-speaker
playback system, including internal television speakers. It is fully compatible with all multichannel
formats.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select SRS TS XT.
3 Press the ◄ or ► button to select Off or On.
Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.

The – +, MUTE buttons do not operate when the TV Speaker is set to Off.

When TV Speaker is set to Off, you can operate only Sound Select (in PIP mode) in Sound
menu.
Sound Select: Main/Sub
When the PIP feature is activated, you can listen to you can operate only Sound Select (in PIP mode)
in Sound menu.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
Move
Enter
Return
Mode :
Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
TV Speaker : Off
Sound Select : Main
Sound
T V
Move
Adjust
Return
Equalizer
T V
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
+
0
-
R
L
+
0
-
TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
SoundMode ◄ Custom ►
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual I-II : Mono
Move Adjust
Exit
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRSTSXT ◄ Off ►
Energy Saving : Off
Dual I-II : Mono
Move Adjust
Exit
BN68-01427A-Eng.indb 23 2008-03-10 오후 3:14:37
English - 24
Selecting the Sound Mode (depending on the model)
The DUAL I-II button displays/controls the processing and output of the audio signal. When power
is switched on, the mode is automatically preset to either “DUAL-I” or “Stereo”, depending on the
current transmission.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Dual I-II.
3
Press the ◄ or ► button to select the required option.
Type of broadcast On-screen indication
NICAM
Stereo
Regular broadcast
(Standard audio)
Mono (Normal use)
Regular + NICAM Mono NICAM
Mono
(Normal)
NICAM Stereo
NICAM
stereo
Mono
(Normal)
NICAM DUAL-I/II
NICAM
dual-1
NICAM
dual-2
Mono
(Normal)
A2
Stereo
Regular broadcast
(Standard audio)
Mono (Normal use)
Bilingual or DUAL-I/II Dual I
Dual II
Stereo Stereo
Mono
(Forced mono)

If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono.
If the stereo signal is weak and automatic switching occurs, switch to Mono.
This function is only available in Analog TV mode.
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to watch a TV program without
disturbing other people in the room.
When you insert the head set jack into the corresponding
port, you can operate only “Auto Volume” and Sound
Select(in PIP mode) in Sound menu.
Prolonged use of headphones at a high volume may
damage your hearing.
You will not hear sound from the speakers when you
connect headphones to the TV.
The headphone volume and TV volume are adjusted
separately.
TV Side Panel
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
DualI-II ◄ Mono ►
Move Adjust
Exit
BN68-01427A-Eng.indb 24 2008-03-10 오후 3:14:38
English - 25
Time Features
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Time, then press the
ENTER button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
Available options:
Clock Set, Sleep Timer, Timer 1, Timer 2,
Timer 3
5 When you are satisfied with your setting, press the ENTER
button.
6 Press the EXIT button to exit.
Clock Set
You can set the television clock so that the current time is
displayed when pressing the INFO button on the remote control.
You must also set the time if you wish to use the automatic on
or off timers.
− Press the ◄ or ► button to select
Month, Day, Year, Hour,
or Minute. Set these by pressing the ▲ or ▼ button.

You can set the Month, Day, Year, Hour, or Minute
directly by pressing the numeric buttons on the remote
control.

In the event of a power interruption or the set being turned
off at the supply, the settings for the Clock will be lost.
Sleep Timer
You can select a time period of between 30 and 180 minutes
after which the television automatically switches to standby
mode.
− Select the preset time interval (
Off, 30, 60, 90, 120, 150, or
180
) for staying on by pressing the ▲ or ▼ button.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Sleep Timer.
3 Press the ◄ or ► button to select the minute, then press the
ENTER button.
Timer 1 / Timer 2 / Timer 3
You can set the On/Off timers so that the television will switch
on or off automatically at the time you select.
You must set the clock first.
− Press the ◄ or ► button to select the required item below.
Press the ▲ or ▼ button to adjust to the setting satisfied.
On Timer : Select hour, minute, and Inactivate/Activate. (To activate timer with the setting
satisfied, set to Activate.)
Off Timer : Select hour, minute, and Inactivate/Activate. (To activate timer with the setting
satisfied, set to Activate.)
Repeat : Select Once, Everyday, Mon~Fri, Mon~Sat, or Sat~Sun.
Volume : Select the required volume level.

You can set the hour, minute, directly by pressing the number buttons on the remote control.
Auto Power Off
When you set the timer “On”, the TV will eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by timer. This function is only available in timer “On” mode and prevents
overheating, which may occur if a TV is on for too long time.
Move
Enter
Return
Clock Set : 00 : 00
Sleep Timer : Off
Timer 1 : Inactivated
Timer 2 : Inactivated
Timer 3 : Inactivated
Time
T V
Move
Enter
Return
Plug & Play
Language : English
Time
Light Effect
:
In Standby
Auto Wall-Mount
Melody : Off
Entertainment
: Off
Energy Saving :
Off
PIP
Setup
T V
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
SleepTimer ◄ Off ►
SRS TS XT : Off
Energy Saving : Off
Dual I-II : Mono
Move Adjust
Exit
Move
Adjust
Return
Timer 1
T V
00 00 Inactivate
On Time
:
Off Time
10
Once
Repeat
00 00 Inactivate
:
Volume
BN68-01427A-Eng.indb 25 2008-03-10 오후 3:14:40
English - 26
Language / Light Effect / Melody / Entertainment /
Energy Saving / PIP
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
Available options:
Language, Melody, Light Effect,
Entertainment, Energy Saving, PIP
4 When you are satisfied with your setting, press the ENTER
button.
5 Press the EXIT button to exit.
Language
It is variable depending on the model. When you start using the television for the first time, you must
select the language which will be used for displaying menus and indications.
Light Effect: Off/In Standby/In Watching TV/Always
You can turn on/off the blue LED on the front of TV according to the situation. Use it for saving power
or when the LED dazzles your eyes.
−
Off: The blue LED is always off.
−
In Standby: The blue LED lights while in Standby mode and it turns off when your TV is turned on.
−
In Watching TV: The blue LED lights when watching TV and it turns off when your TV is turned off.
−
Always: The blue LED always lights.

Set the Light Effect to Off to reduce the power consumption.
Melody: Off/Low/Medium/High
The TV power on/off melody sound can be adjusted.

When the Melody does not play

When no sound is output from the TV because the MUTE button has been pressed.

When no sound is output from the TV because the – (Volume) button has been pressed.

When the TV is turned off by Timer function.
Entertainment: Off/Sports/Cinema/Game
Entertainment mode enables you to select the optimal display and sound for sports, cinema and
games.
−
Off: Switches the Entertainment function off.
−
Sports: Provides the optimal picture and sound quality for sports.
− Cinema:
Provides the optimal picture and sound quality for movie watching.
You can experience a richer picture and enhanced sound.
− Game:
Provides the optimal picture and sound quality for games. This mode accelerates the
playing speed when using an external game console connected to the TV.

If you set any of the three Entertainment modes to On, the settings will be locked and can not
be adjusted. If you want to make Picture and Sound mode adjustments, the Entertainment mode
must be turned off.

The Entertainment settings are saved for each input source.
Continued...
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Move
Enter
Return
Plug & Play
Language : English
Time
Light Effect
:
In Standby
Auto Wall-Mount
Melody : Off
Entertainment
: Off
Energy Saving :
Off
PIP
Setup
T V
BN68-01427A-Eng.indb 26 2008-03-10 오후 3:14:41
English - 27
Energy Saving: Off/Low/Medium/High
This feature adjusts the screen brightness depending on the
surrounding lighting conditions.
−
Off: Switches off the Energy Saving mode.
−
Low: Operates in standard mode regardless of the
surrounding illumination.
−
Medium: Enters Medium power saving mode regardless of
the surrounding illumination.
−
High: Enters maximum power saving mode regardless of
the surrounding illumination.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Energy Saving.
3 Press the ◄ or ► button to select the required option.
PIP (Picture in Picture): PIP(On/Off)/Source/Size/Position/
Programme
You can display a sub picture within the main picture. In this
way you can watch TV programme or monitor the video input
from any connected devices.
−
PIP: On/Off
You can activate or deactivate the PIP function.
Table of PIP Settings
Main Picture Sub Picture
Component
HDMI1, 2, 3
PC
TV, DTV, Ext1, Ext2, AV
− Source
You can select a source of the sub-picture.
−
Size: / /
You can select a size of the sub-picture.

If main picture is in PC and Component mode, Size is not available.
−
Position: / / /
You can select a position of the sub-picture.

In Double( , ) mode, Position cannot be selected.
−
Programme
You can select a channel of the sub-picture only when the Source is set to TV and DTV.
Move
Enter
Return
Plug & Play
Language : English
Time
Light Effect
:
In Standby
Auto Wall-Mount
Melody : Off
Entertainment
: Off
Energy Saving :
Off
PIP
Setup
T V
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
EnergySaving ◄ Off ►
Dual I-II : Mono
Move Adjust
Exit
Move
Enter
Return
PIP : On
Source : DTV
Size :
Position :
Programme : P 1
PIP
T V
BN68-01427A-Eng.indb 27 2008-03-10 오후 3:14:42
English - 28
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer
are shown below. But the actual screens on your PC will
probably be different, depending upon your particular
version of Windows and your particular video card. But even
if your actual screens look different, the same, basic set-up
information will apply in almost all cases. (If not, contact your
computer manufacturer or Samsung Dealer.)
1 Right click the mouse on the Windows Desktop, then click on
Properties.
The Display Properties will be displayed.
2 Click on Settings tab, then set the Display Mode with
reference to the Display Modes Table. You do not need to
change the Colours settings.
3 Click on Advanced. A new settings dialog box will be displayed.
4 Click on the Monitor tab, then set the Screen refresh rate with reference to the Display Modes
Table. Set the Vertical Frequency and Horizontal Frequency individually if you can do so instead of
setting the Screen refresh rate.
5 Click on OK to close the window, then Click on OK button to the Display Properties window.
Automatic re-booting may commence at this moment.
BN68-01427A-Eng.indb 28 2008-03-10 오후 3:14:42
English - 29
Input Mode (PC)
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
D-Sub Input
Mode Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync Polarity
(H/V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+ / -
- / +
VESA
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1360 x 768
1600 x 1200
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
63.981
79.976
47.712
75.000
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
60.020
75.025
60.015
60.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
135.000
85.500
162.000
- / -
- / -
- / -
+ / +
+ / +
+ / +
- / -
- / -
+ / +
+ / +
+ / +
+ / +
+ / +
CVT 1920 x 1080RB 66.587 59.934 138.500 + / -
HDMI/DVI Input
Mode Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync Polarity
(H/V)
VESA
640 x 480
800 x 600
1024 x 768
1280 x 1024
1360 x 768
1600 x 1200
31.469
37.879
48.363
63.981
47.712
75.000
59.940
60.317
60.004
60.020
60.015
60.000
25.175
40.000
65.000
108.000
85.500
162.000
- / -
+ / +
- / -
+ / +
+ / +
+ / +
CEA 1920 x 1080p 67.500 60.000 148.500 + / +
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
BN68-01427A-Eng.indb 29 2008-03-10 오후 3:14:42
English - 30
Setting the PC
Preset to the PC mode by pressing the SOURCE button.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Picture, then press the
ENTER button.
3 Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
4 When you are satisfied with your setting, press the ENTER
button.
5 Press the EXIT button to exit.
Auto Adjustment :
Auto adjustment allows the PC screen to self-adjust to the
incoming PC video signal.
The values of fine, coarse and position are adjusted
automatically.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Auto Adjustment, then
press the ENTER button.
Screen: Coarse/Fine/Position/Image Reset
-Coarse/Fine
The purpose of picture quality adjustment is to remove or
reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again.
After the noise has been reduced, re-adjust the picture so that
it is aligned on the center of screen.
1 Press the ▲ or ▼ button to select Coarse or Fine, then
press the ENTER button.
2 Press the ◄ or ► button to adjust the screen quality,
vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
-Position
Adjust the PC’s screen positioning if it does not fit the TV
screen.
1 Adjust the position by pressing the ▲/▼/◄/► button.
2 Press the ENTER button.
-Image Reset
You can replace all image settings with the factory default
values.
Move
Enter
Return
Coarse 50
Fine 63
Position
Image Reset
Screen
T V
Move
Enter
Return
Position
T V
Auto Adjustment in Progress
Please wait.
Image Reset is completed.
OK
Move
Enter
Return
Mode : Standard
Cell Light 7
Contrast 80
Brightness 45
Sharpness 50
Auto Adjustment
Screen
Detailed Settings
More
Picture
T V
Tools
Anynet+ (HDMI-CEC)
Picture Mode Standard
Sound Mode Custom
Sleep Timer Off
SRS TS XT Off
Energy Saving Off
PIP
Auto Adjustment
Move
Enter
Exit
BN68-01427A-Eng.indb 30 2008-03-10 오후 3:14:44
English - 31
Previewing the DTV Menu System

The company does not guarantee the normal operation
of the DTV menu for countries other than the 8 supported
countries (United Kingdom, France, Germany, Italy,
Netherlands, Spain, Switzerland, Austria) because only
these country standards are supported. In addition, when
the country of the broadcast stream differs from the
country selected by the current user, the string appearing
in the channel banner, Info, Guide, Channel List, etc. may
not be displayed properly.
Available in DTV mode. Preset to the DTV mode by using
the TV/DTV button on your remote control.
To help you navigate around the on-screen menu system
and adjust the various settings available, refer to the
following illustration.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select
Digital Menu, then press
the ENTER button.
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide Now/Next
Full Guide
Digital Channel
Country
Auto Store
Manual Store
Edit Favourite Channels
Channel List All
Favourites
Default All
Favourites
Setup
Menu Transparency High
Medium
Low
Opaque
Change PIN
Parental Lock Parental Rating
Subtitle Off
On
Subtitle Mode Normal
Hard of hearing
Audio Format PCM
Dolby Digital
Audio Description Audio Description
Volume
Digital Text Disable
Enable
Time Zone
Common Interface
System Product Information
Signal Information
Software Upgrade
Reset
Continued...
Move
Enter
Return
Guide
Digital Channel
Setup
Language
Digital Menu
T V
Move
Enter
Return
Now & Next Guide
Full Guide
Scheduled List
Default Guide : Full Guide
Guide
DTV
Country : United Kingdom
Auto Store
Manual Store
Edit Favourite Channels
Channel List
Channel
Move
Enter
Return
DTV
Menu Transparency : Medium
Change PIN
Parental Lock
Subtitle : On
Subtitle Mode
Setup
Move
Enter
Return
DTV
BN68-01427A-Eng.indb 31 2008-03-10 오후 3:14:45
English - 32
Language
Audio Language
Subtitle Language
Teletext Language
Preference Primary Audio Language
Secondary Audio Language
Primary Subtitle Language
Secondary Subtitle Language
Primary Teletext Language
Secondary Teletext Language
(depending on the Country)
The sub-items of the CI Menu may vary depending on the CAM model. (refer to page 42)
Displaying Programme Information
While viewing a channel, additional information about the
current programme may be displayed.
While viewing a programme, press the INFO button.
The programme information is displayed.

The information is displayed:
− Parental Rating
− Video Type: SD, HD, Radio
− Audio Type: Mono, Stereo, Dual, Dolby Digital
− Existence of Teletext or DVB Subtitle
− Audio Language

To exit from banner information, press the INFO button.
Exit
1 AFDO, 16:9
AFDO, 16:9
No Block
SD
Stereo
Subtitle
English
21:49 Sat 1 May
All Channels
14:20 - 14:33
Contains video with AFD O; coded frame
is 16:9
Audio Language
Subtitle Language
Teletext Language
Preference
Language
Move
Enter
Return
DTV
BN68-01427A-Eng.indb 32 2008-03-10 오후 3:14:47
English - 33
Operating the DTV Menu
Viewing the DTV Menu
After installing your antenna system and TV with appropriate
connectors.
Plug in the AC main power and switch on the TV.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Digital Menu, then press the
ENTER button.
The main menu appears on the screen. Its left side has four
icons: Guide, Digital Channel, Setup, and Language.
1. Digital Channel
This menu consists of 5 sub-menus:
Country, Auto Store, Manual Store, Edit Favourite
Channels, and Channel List.
Press the ▲ or ▼ button to select Channel, then press
the ENTER button. The Channel menu is displayed.
1.1 Country
Press the ENTER button. The Country menu is displayed.
Select your country by pressing the ▲ or ▼ button, then
press the ENTER button.
Even though you have changed the country setting
in this menu, the country setting for Analog TV is not
changed.(Refer to page 10)
1.2 Auto Store
You can update the channel list when the broadcaster adds
new services or if you move the TV to a new location.
Press the ENTER button to select Auto Store. Press
the ENTER button again to start the search. When it has
finished, the number of scanned services will be displayed.
− The existing favourite channel list will not be deleted
when the channel list is updated.
− To stop the scan before it has finished, press the
ENTER button with Stop selected.
If the signal status is poor, No service found! Check the
aerial connection. message is displayed.
1.3 Manual Store
You can specify the channel for a fast channel search.
− Channel
Press the ▲, ▼ or numeric buttons (0~9) to select a
channel.
The available channels are 21~68. The corresponding
frequency for the selected channel is automatically set.
−
Frequency
If you do not know the exact frequency, follow the above
step to select the frequency automatically using channel.
−
Bandwidth
The available bandwidths are 7 and 8 MHz.
Continued...
Country : United Kingdom
Auto Store
Manual Store
Edit Favourite Channels
Channel List
Channel
Move
Enter
Return
DTV
Country : United Kingdom
Auto Store
Manual Store
Edit Favourite Channels
Channel List
Channel
Move
Enter
Return
DTV
Auto Store
Return
0%
Services found: 0 Channel:
-
Start
DTV
Country : United Kingdom
Auto Store
Manual Store
Edit Favourite Channels
Channel List
Channel
Move
Enter
Return
DTV
Channel Frequency Bandwidth
5 177500 KHz 7 MHz
Manual Store
Adjust
Return
Search
DTV
Move
Enter
Exit
Guide
Digital Channel
Setup
Language
Digital Menu
T V
BN68-01427A-Eng.indb 33 2008-03-10 오후 3:14:49
English - 34
Press the red button to start the scan for digital services. When it has finished, channels are
updated in the channel list.
You can input by pressing the button on the remote control.
You can not change only frequency and when changing a channel the Frequency will be
automatically changed.
1.4 Edit Favourite Channels
You can edit your favourite channels using the colour buttons.
In the case of DTV mode, OK or Select can be used as
the ENTER button.
Press the red button in the Edit Favourite Channels menu
to display all currently stored channels.
Press the ▲ or ▼ button to select a channel you want.
Press the ENTER button. A “” icon is shown next to the
selected channel and the channel will be added to the
favourites list.

To undo, press the ENTER button again.
Select AlI: Select all channels currently displayed.
Select None: Deselect all selected channels.
Preview: Displays (a) currently selected
channel(s).

If The Favourite Channels settings have been
completed.
Add
You can use this function when one or more favourite
channels have been selected.
− Press the red button in the
Edit Favourite Channels
menu. To add more channels, refer to the previous
section.
− To add all channels to the favourites channel list, press
the red button.
− To remove all channels, press the green button.
−
Preview: Displays (a) currently selected channel(s).
− Press the
CH LIST button to display the favourite
channel list.
Renumber (depending on the Country)
− In the Edit Favourite Channels menu, press the ▲ or ▼
button to select the required channel.
− Press the green button.

The space for entering the number is a blank.
− Enter the new channel number. Press
ENTER button to store or RETURN button to cancel.

Press the ◄ button to delete an entered digit.

If you enter a number already assigned to another channel, the number is assigned to the
selected channel and the previous number assigned to the selected channel is assigned
to the other channel.
That is, the two numbers are exchanged.

The favorite channels are automatically sorted in ascending order of channel numbers.
Preview
− In the
Edit Favourite Channels menu, press the ▲ or ▼ button to select the channel to be
previewed.
− Press the yellow button. Displays currently selected channel.
Delete
− In the
Edit Favourite Channels menu, press the ▲ or ▼ button to select the channel to be
deleted from the favourite channels list.
− Press the blue button. The selected channel and number will be deleted.

To add a deleted channel back in to the favourite channel list, see Add.
Continued...
Country : United Kingdom
Auto Store
Manual Store
Edit Favourite Channels
Channel List
Channel
Move
Enter
Return
DTV
1 BBC TWO
2 Five
3 BBC THREE
4 abc1
5 QVC
Edit Favourite Channels
Move
Select
Return
Select All Select None Preview
DTV
1 BBC TWO
2 BBC THREE
3 abc1
Edit Favourite Channels
Add Renumber Preview Delete
Move
Return
DTV
BN68-01427A-Eng.indb 34 2008-03-10 오후 3:14:51
English - 35
1.5 Channel List
You can display a list of all channels or your favourite
channels.
Press the ▲ or ▼ button to select Channel List, then
press the ENTER button.

It can be displayed simply by pressing the CH LIST
button.
Press the yellow button to toggle between your favourite
channels and all channels.
Your favourite channels are only displayed if they were
previously set in the Edit Favourite Channels menu
(refer to page 34).
Press the red or green button to display the previous or
next channel list page.
Press the ▲ or ▼ button to select a channel to be tuned, then press the ENTER button.

The channel number, name and an icon are displayed in the top left corner while changing
the channel. The channel number and name are displayed if the channel is one of the all
channels, and a icon if the channel is one of the favourite channels.
Press the blue or CH LIST button to exit from the channel list.
2.
Guide
This menu consists of 4 sub-menus:
Now & Next Guide, Full Guide, Scheduled List, and Default
Guide.
2.1
Now & Next Guide / Full Guide
The EPG (Electronic Programme Guide) information is
provided by the broadcasters. Programme entries may appear
blank or out of date as a result of the information broadcast on
a given channel.
The display will dynamically update as soon as new information
becomes available.
−
Now & Next Guide
For the six channels indicated in the left-hand column,
displays the Current programme and the Next programme
information.
−
Full Guide
Displays the programme information as time ordered 1 hour
segment. 2 hours of programme information is displayed
which may be scrolled forwards or backwards in time.
Press the ▲ or ▼ button to select Now & Next Guide or
Full Guide. Press the ENTER button. The selected guide
menu is displayed.
− Press the red button to toggle between
Now & Next
Guide or Full Guide.
− Press the green button to display
Favourites or All
Channels list.
− Press the yellow button to scrolls backwards quickly
(24 hours).
− Press the blue button to scrolls forwards quickly
(24 hours).

You can also display the guide menu simply by
pressing the GUIDE button.
To watch a programme in the EPG list, press the
▲/▼/◄/► button to select a programme of your choice,
then press the ENTER button.

If the next programme is selected, it is scheduled with the clock icon displayed. If the
ENTER button is pressed again, the scheduling is canceled with the clock icon gone. For
details about scheduling programmes, refer to the section.
Continued...
Channel List
BBC TWO All Channels-All
1. Test Card ‘M’...
2. BBC TWO
3. Vida003b
4. Vida004b
5. Vida005b
6. Vida006b
7. BBC THREE
30. CB
BC Channel
40. BBC NEWS24
51. BBCi
800 ARD-MHP-DATA
801 ARD-OnLine-K..
802 BBC ONE
803 MDR FERNSE..
804 NDR FERNSEH..
805 Vida002b
806 arte
Previous Page Next Page
Favourites TV
Move
Watch
Return
Now & Next Guide
Now Next
Watch Full Guide Favourites Exit
BN68-01427A-Eng.indb 35 2008-03-10 오후 3:14:52
English - 36
To view programme information, press the ▲/▼/◄/► button to select a programme of your
choice, then press the INFO button.

Information such as the channel number, programme title and running time, status bar,
and brief summary of the highlighted programme will be displayed in the top right corner
of the screen. If there is a lengthy summary, “…” will be displayed. Press the INFO button
for the full summary text.
Six channels are displayed. To scroll between channels, move to a channel using the ▲
or ▼ button. To display page by page, use the P or button.
2.2
Scheduled List
If you make a scheduled viewing list of programs you may
like to see, the channel will be automatically switched to the
scheduled program at the scheduled time even if you are
watching another program.
Press the red button to add a new programme. The
menu for adding a programme is displayed with Channel
selected.
Press the ▲/▼ and ENTER buttons to set the required
channel, time, date, and frequency. When you are satisfied
with your settings, save the adjusted schedule by pressing
the red button.
If you want to edit the scheduled programme, select a
programme by pressing the ▲ or ▼ button, then press
the green button. If necessary, select the programme to
be deleted by pressing the ▲ or ▼ button, then press the
blue button.

When watching analog TV, the reserved DTV channel
cannot be changed. The channel is only changed
automatically to the reserved channel when you are
watching DTV.

Scheduling programme only functions with the
television already turned on, and not from standby
mode. For details about switching the television on
and off automatically, refer to page 25.
2.3
Default Guide
You can preset the default guide style.
Press the ▲ or ▼ button to select the required option
(Now/Next or Full Guide), then press the ENTER button.
The selected option for default guide is displayed on the
EPG menu and the channel list appears.
Continued...
Scheduled List
Move
Return
Thursday 22 Apr 15:30 ~ 18:00 Once
2 BBC TWO
Animal Park
Thursday 22 Apr 20:00 ~ 21:00 Once
2 BBC TWO
The Hairy Biker’s
Add Programme Edit Delete
DTV
Scheduled List
Adjust
Move
Return
Save Cancel
Channel
Time
Date
Frequency
20 MOJO
19:00 - 21:00
Thu 6 Jan 2008
Once
DTV
Now & Next Guide
Full Guide
Scheduled List
Default Guide : Full Guide
Guide
Move
Enter
Return
DTV
Now & Next Guide
Full Guide
Scheduled List
Default Guide : Full Guide
Guide
Move
Enter
Return
Now/Next
Full Guide
DTV
BN68-01427A-Eng.indb 36 2008-03-10 오후 3:14:54
English - 37
2.4 All Channels and Favorite Channels
In the EPG menu, you can display all channels or favourite
channels.
Press the green button repeatedly to toggle between the
all and favourite channels list.
When the favorite channel list has not been set up:
−
The favorite list is empty. Would you like to choose
your favorite now? message is displayed.
− Select
Yes. The Edit Favourite Channels menu is
displayed. If you select No, all channels will remain
unchanged.
− To edit the favourite channels, refer to page 34 for more
details.

All Channels is the list of channels that have
been scanned by the channel list update. All
channels are displayed in the all channel mode.
Favourites (favourite channels) is the list of
channels that has been set in the Edit Favourite
Channels menu (refer to page 34).
When there is no channel information, the No
Data message will be displayed and you will not
be able to change the channel even if you press
the ENTER button.
When the No Data message appears and you
cannot change the channel, press the channel
number directly using the numeric buttons.
3. Language
This menu consists of 4 sub-menus:
Audio Language, Subtitle Language, Teletext Language,
and Preference.
3.1 Audio Language / Subtitle Language / Teletext Language
You can change the default value for subtitle, audio and
teletext languages.
Press the ▲ or ▼ button to select required menu (Audio
Language, Subtitle Language, or Teletext Language),
then press the ENTER button. The options of the selected
menu are displayed.
Continued...
Now & Next Guide
Now Next
Watch Full Guide Favourites Exit
Now & Next Guide
Watch Full Guide Favourites Exit
The favourites list is empty.
Would you like to choose your
favourites now?
Yes No
Now & Next Guide
Full Guide
Scheduled List
Default Guide : Full Guide
Guide
Move
Enter
Return
DTV
Audio Language
Subtitle Language
Teletext Language
Preference
Language
Move
Enter
Return
DTV
BN68-01427A-Eng.indb 37 2008-03-10 오후 3:14:56
English - 38
3.2 Preference
This menu consists of 6 sub-menus:
Primary Audio Language, Secondary Audio Language,
Primary Subtitle Language, Secondary Subtitle Language,
Primary Teletext Language, and Secondary Teletext
Language (depending on the Country).
Using this feature, users can select one of the languages
(English, German, Italian, Swedish, French, Welsh, Gaelic,
Irish, Danish, Finnish, Spanish, Dutch). The language selected
here is the default when the user selects a channel.
Press the ▲ or ▼ button to select required menu (Primary
Audio Language, Secondary Audio Language, Primary
Subtitle Language, Secondary Subtitle Language,
Primary Teletext Language, or Secondary Teletext
Language), then press the ENTER button.
The options of the selected menu are displayed.
Press the ▲ or ▼ button to select required option
(English, German, Italian, Swedish, French, Welsh,
Gaelic, Irish, Danish, Finnish, Spanish, Dutch), then
press the ENTER button.

If you change the language setting, the Audio
Language, Subtitle Language, and the Teletext
Language of the Language menu (refer to page 37)
are automatically changed to the selected language.
The Audio Language, Subtitle Language, and the
Teletext Language of the Language menu show a
list of languages supported by the current channel and the selection is highlighted. If you
change this language setting, the new selection is only valid for the current channel. The
changed setting does not change the setting of the Primary Audio Language, Primary
Subtitle Language, or the Primary Teletext Language of the Preference menu.
Continued...
Audio Language
Subtitle Language
Teletext Language
Preference
Language
Move
Enter
Return
DTV
Primary Audio Language
: English
Secondary Audio Language
: English
Primary Subtitle Language
: English
Secondary Subtitle Language
: English
Primary Teletext Language
: English
Preference
Move
Enter
Return
DTV
Primary Audio Language
: English
Secondary Audio Language
: English
Primary Subtitle Language
: English
Secondary Subtitle Language
: English
Primary Teletext Language
: English
Preference
Move
Enter
Return
English
German
Italian
Swedish
French
Welsh
DTV
BN68-01427A-Eng.indb 38 2008-03-10 오후 3:14:57
English - 39
4. Setup
This menu consists of 11 sub-menus:
Menu Transparency, Change PIN, Parental Lock, Subtitle,
Subtitle Mode, Audio Format, Audio Description, Digital
Text, Time Zone, Common Interface and System.
4.1 Menu Transparency
You can set the translucency of the on-screen menu.
Press the ▲ or ▼ button to select required option (High,
Medium, Low, or Opaque), then press the ENTER button.
4.2
Change PIN / Parental Lock
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by a 4-digit
PIN (Personal Identification Number) code that is defined by
the user.
The on-screen menu will instruct you to assign a PIN code
(you can change it later, if necessary).
Enter your current 4-digit PIN code by using the numeric
buttons (0~9). The Parental Lock menu are displayed
with the Parental Rating selected.

The default PIN code for a new TV set is 0000.
If you enter an invalid PIN code, the Invalid PIN
code. Please try again. message is displayed.
Press the ENTER button. Press the ▲ or ▼ button to
select the age rating you want to lock out, then press the
ENTER button.
If you want to change the PIN code, press the ▲ or ▼
button to select Change PIN, then press the ENTER
button.
− Enter your new PIN code by using the numeric buttons
(0~9). The Confirm New PIN is displayed.
− Re-enter your new PIN code to confirm by using the
numeric buttons (0~9). The Your PIN code has been
changed successfully. message is displayed.
If you forget the PIN code, press the remote control
buttons in the following sequence, which resets the PIN to
0-0-0-0: POWER (Off) MUTE 8 2 4 POWER
(On).
Continued...
Menu Transparency : Medium
Change PIN
Parental Lock
Subtitle : On
Subtitle Mode : Normal
Setup
Move
Enter
Return
DTV
Menu Transparency : Medium
Change PIN
Parental Lock
Subtitle : On
Subtitle Mode : Normal
Setup
Move
Enter
Return
High
Medium
Low
Opaque
DTV
Menu Transparency : Medium
Change PIN
Parental Lock
Subtitle : On
Subtitle Mode : Normal
Setup
Move
Enter
Return
DTV
Enter PIN
Parental Lock
.. Enter PIN
Return
DTV
Confirm New PIN
Change PIN
.. Enter PIN
Return
DTV
Enter New PIN
Change PIN
.. Enter PIN
Return
DTV
BN68-01427A-Eng.indb 39 2008-03-10 오후 3:15:00
English - 40
4.3 Subtitle / Subtitle Mode / Audio Format / Audio Description /
Digital Text
You can use various settings to suit your personal preferences.
Press the ▲ or ▼ button to select required menu
(Subtitle, Subtitle Mode, Audio Format, Audio
Description or Digital Text), then press the ENTER
button. The options of the selected menu are displayed.
Press the ▲ or ▼ button to select required option, then
press the ENTER button.
−
Subtitle : On / Off
You can select these options simply by pressing the
SUBTITLE button on the remote control.
−
Subtitle Mode : Normal (basic subtitle) / Hard of hearing
(subtitle for a hearing-impaired person)
If the programme you are watching does not support
the Hard of hearing function, Normal automatically
activates even though Hard of hearing mode is
selected.
−
Audio Format
You can only hear Dolby Digital sound through the audio
receiver connected through an optical cable. You can only
hear PCM sound through the main speaker.
When sound is emitted from both the main speaker and the
audio receiver, a sound echo may occur due to the decoding
speed difference between the main speaker and the audio
receiver. In this case, use the TV Speaker function.
Even if you have selected PCM or Dolby Digital in Audio
Format, when the input signals are any format of PCM
and Dolby Digital, the input format is applied regardless
of the setting. If the input signals are not any of those,
the setting is not applied.
−
Audio Description
This is an auxiliary audio function that provides an additional audio track for visually challenged
persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent
along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off
and control the volume.
− Digital Text : Enable / Disable (UK only)
If the programme is broadcast with digital text, this feature is enabled.
MHEG (Multimedia and Hypermedia Information Coding Experts Group)?
An International standard for data encoding systems used in multimedia and hypermedia.
This is at a higher level than the MPEG system which includes data-linking hypermedia such
as still images, character service, animation, graphic and video files as well as multimedia
data. MHEG is user runtime interaction technology and is being applied to various fields
including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-
education, tele-conferencing, digital libraries and network games.
4.4
Time Zone (Spain only)
You can select the time zone where you are located.
This menu is only enabled when you select a country
supported by the time zone.
Continued...
Menu Transparency : Medium
Change PIN
Parental Lock
Subtitle : On
Subtitle Mode : Normal
Setup
Move
Enter
Return
DTV
Menu Transparency : Medium
Change PIN
Parental Lock
Subtitle : On
Subtitle Mode : Normal
Setup
Move
Enter
Return
Off
On
DTV
Menu Transparency : Medium
Change PIN
Parental Lock
Subtitle : On
Subtitle Mode : Normal
Setup
Move
Enter
Return
DTV
Audio Format : PCM
Audio Description
Digital Text : Enable
Time Zone
Common Interface
Setup
Move
Enter
Return
DTV
BN68-01427A-Eng.indb 40 2008-03-10 오후 3:15:02
English - 41
4.5 Common Interface
Installing the CI Card
a. Purchase the CI CAM module by visiting your
nearest dealer or by phone.
b. Insert the CI CARD into the CAM in the direction of
the arrow until it fits.
c. Insert the CAM with the CI CARD installed into the
common interface slot.
Insert the CAM in the direction of the arrow, right
up to the end so that it is parallel with the slot.
d. Check if you can see a picture on a scrambled signal
channel.
You can install the CAM anytime whether the TV
is ON or OFF.
Application Info.
This contains information on CAM inserted in the CI slot
and displays it.
− Press the
ENTER button to display the information
for your application.
CI Menu
This helps the user select an item from the CAM-supported menu.
− Press the
ENTER button. The options of the selected menu are displayed.
Press the ▲ or ▼ button to select the required option, then press the ENTER button.
Select the CI Menu based on the PC Card menu.
Continued...
CI Menu
Move Enter Exit
Type: CA
Manufacturer: Canal Plus
Info: Top Up TV
Application Info.
Return
DTV
BN68-01427A-Eng.indb 41 2008-03-10 오후 3:15:03
English - 42
4.6 System
This menu consists of 4 sub-menus:
Product Information, Signal Information, Software
Upgrade, and Reset.
− Product Information
You can view your product information. For service or repair,
please contact a Samsung approved dealer.
Press the ENTER button with Product Information
selected. The product information menu is displayed.
−
Software Version / Firmware Version
− Signal Information
You can get information about the signal status.
Press the ENTER button with Signal Information
selected. The technical information for signal status is
displayed.
−
Service / Service ID / Multiplex / Network / Bit
error level / Signal Strength
− Software Upgrade (Option)
To keep your product up-to-date with new digital television
features then software upgrades are periodically broadcast
as part of the normal television signal. It will automatically
detect these signals and display the software upgrade
banner. You are given the option to install the upgrade.
Software Inforamtion
Press the ENTER button, then the current software
version is shown. To display the software version
information, press the ENTER button again.
Manual Upgrade
Press the ENTER button to search for new software
from the currently broadcasting channels.
Standby Mode Upgrade : On / Off
Press the ENTER button. To continue software upgrade
with master power on, Select On by pressing the ▲ or
▼ button.
45 minutes after entering standby mode, a manual
upgrade is automatically conducted. Since the power
of the unit is turned on internally, the screen may be
on slightly for the PDP product. This phenomenon
may continue for more than 1 hour until the software
upgrade is completed.
−
Reset
You can reset the values stored to the factory default values.
The Reset operation deletes all channel information
and user preferences returning all values to their default
factory state.
Press the ENTER button with Reset selected.
The Enter PIN is displayed.
Enter your current 4-digit PIN code by using the
numeric buttons (0~9). The warning message is
displayed. All values will be reset by pressing the
coloured buttons (red, green, yellow, and blue) in turn.
The default PIN of a new TV set is “0-0-0-0”.
When PIN is changed in Child Lock, the PIN for
resetting automatically changes.
When reset is complete, it operates DTV Plug & Play
(DTV Auto Store, Time Zone-depending on the country,
Time Setting) and exits from the digital TV mode without changing to the analog TV mode.
(Refer to page 10~11)
System
Setup
Move
Enter
Return
DTV
Product Information
Signal Information
Software Upgrade
Reset
System
Move
Enter
Return
DTV
Software Version: T-JSM22DEUC-1001
Firmware Version: T-EMMA2DEUB-0106
Product Information
Return
DTV
Service: ?
Service ID: 0000
Multiplex: ? (TSID 0000,ONID 0000)
Network: ? (ID 0000)
Bit error level: 10
Signal Strength: 0
Signal Information
Return
DTV
Software Information
Manual Upgrade
Standby Mode Upgrade : On
Software Upgrade
Move
Enter
Return
DTV
WARNING: All channel settings and user preferences will be
lost and returned to the factory defaults. It is recommended
that a reset is performed only when serious problems are
experienced.
Reset
Return
DTV
BN68-01427A-Eng.indb 42 2008-03-10 오후 3:15:05
English - 43
Using the WISELINK Function
This function enables you to view and listen to photo (JPEG)
and audio files (MP3) saved on a USB Mass Storage Class
(MSC) device.
Press the POWER button on the remote control or front
panel. Connect a USB device containing JPEG and/or MP3
files to the WISELINK jack (USB jack) on the side of the TV.
If you enter the WISELINK mode with no USB device
connected the message There is no device connected will
appear. In this case, insert the USB device, exit the screen
by pressing the W.LINK button on the remote control and
enter the WISELINK screen again.
Only alphanumeric characters must be used as a folder name or filename (photo, music).
The file system only supports FAT16/32 (The NTFS file system is not supported)
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
Wiselink only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class Bulk-
Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD
and HUB are not supported.)
Before connecting your device to the TV, please back up your files to prevent them from damage or
loss of data. SAMSUNG is not responsible for any data file damage or data loss. Recommended image
resolution for Wiselink is 6 mega pixels.
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there
may be a USB Compatibility problem.
Only MP3 and JPEG file formats are supported.
The Wiselink mp3 format only supports music files with a high sampling frequency (32 kHz, 44.1 kHz, or
48 kHz).
We recommend the sequential jpeg format.
Do not disconnect the USB device while it is ( ).
PTP(Picture Transfer Protocol) is supported, but MTP(Media Transfer Protocol) is not supported.
The playing duration of an mp3 file may be displayed as ‘00:00:00’ if its playing time information is not
found at the start of the file.
The higher the resolution of the image, the longer it takes to display on the screen.
The Photo or Music List displays up to 300 folders or files.
TV Side Panel
BN68-01427A-Eng.indb 43 2008-03-10 오후 3:15:06
English - 44
Using the Remote Control Button in WISELINK Menu
Button Operations
Move the cursor and select an item.
Select the currently selected item.
Play or pause the Slide Show or MP3 file.
Return to the previous menu.
Run various functions from the Photo and Music menus.
Stop the current slide show or MP3 file.
Page Up or Down (file list item)
Stop the current function and return to the previous high-level menu.
Using the WISELINK Menu
1 Press the MENU button.
Press the ▲ or ▼ button to select Input, then press the ENTER
button.
2 Press the ▲ or ▼ button to select WISELINK, then press the
ENTER button.
3 Press the ▲ or ▼ button to select the corresponding USB
Memory Device, then press the ENTER button.

The WISELINK menu differs depending on the USB
Memory Device connected to TV.

Some devices may not be supported due to compatibility
problems.
4 Press the ◄ or ► button to move to an icon, then press the
ENTER button.

To exit WISELINK mode, press the W.LINK button on
the remote control.

Press the W.LINK button on the remote control to display a
WISELINK menu.
Move
Enter
Return
Source List :
TV
Edit Name
Anynet+ (HDMI-CEC)
WISELINK
Input
T V
Move Enter Exit
Photo
Music Setup
CELLDISK2.0
315MB/495MB Free
Move Enter Return
Photo
BN68-01427A-Eng.indb 44 2008-03-10 오후 3:15:09
English - 45
Using the PHOTO (JPEG) List
This menu shows JPEG files and folders saved on an USB
memory device.
1 Complete Steps 1 to 3 of Using the WISELINK Menu.
(Refer to page 44)
2 Press the ◄ or ► button to move to
Photo, then press the
ENTER button. The saved file information is displayed as a
folder or file.
3 Press the ▲, ▼, ◄ and ► buttons to select a file.
• Pressing the
ENTER button over a photo icon shows the
currently selected photo in full screen.
• Pressing the
ENTER button over a folder icon shows the
JPEG files included in the folder.
To exit WISELINK mode, press the W.LINK button on the
remote control.

Moving to a photo may take a few seconds to load the
file. At this point, the ( ) icon will appear at the
top left of the screen.

It takes time to show JPEG files as Thumbnail images.

This menu only shows files whose file extension is jpg. Files of other formats such as bmp or tiff
will not be displayed.

The files are displayed on a page. 15 thumbnail photos are displayed per page.

The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.

Certain types of USB Digital camera and audio devices may not be compatible with this TV.

Folders are displayed first and they are followed by all JPEG files in the current folder. The
folders and JPEG files are sorted in alphabetical order.

If the photo is displayed in full screen, you can zoom in and out or rotate the photo on the screen.

While a full screen is displayed, ◄ or ► button will let you see another photo image in the same
folder.

Press the PLAY/PAUSE button when a Photo icon is selected to start a Slide Show.

Photos without EXIT information may not be displayed as thumbnail images in the PHOTO LIST
depending on the picture quality and resolution.
Viewing a Slide Show
4 Press the INFO button to display the option(Start Slide
Show, Select All).
5 Press the ▲ or ▼ button to select Start Slide Show then
press the ENTER button.

During the slide show, files are displayed in order from
the currently shown file.

MP3 files can be automatically played during the Slide
Show if the Default Background Music is set to On. To
enable this function, MP3 files and other photo files
must be located in the same folder on the USB Memory
Device.
6 Press the INFO button during the slide show to set the
following options (Slide Show Speed, Background Music,
Background Music Setting, List).
Press the ▲ or ▼ button to select the option, then press the
ENTER button.
After setting the option press the ENTER button to make a
change.
Continued...
Slide Show Speed : Normal
Background Music : Off
Background Music Setting
List
Exit
Photo
Music Setup
CELLDISK2.0
315MB/495MB Free
Move Enter Return
Photo
Photo 0001
File 2
File 4
File 9 File 10 File 11 File 12 File 13
File 5 File 6 File 7 File 8
None
1/10 Page
Photo
400x340
53 KB
May 1, 2007
1 / 14
CELLDISK2.0
315MB/495MB
Photo 0001
Select Move Enter Option Return
Photo 0001
File 2
File 4
File 9 File 10 File 11 File 12 File 13
File 5 File 6 File 7 File 8
None
1/10 Page
Photo
400x340
53 KB
May 1, 2007
1 / 14
Photo 0001
Select Move Enter Option Return
Exit
Start Slide Show
Select All
BN68-01427A-Eng.indb 45 2008-03-10 오후 3:15:14
English - 46
Using the Menu during a Slide Show
Slide Show Speed:
Select to control the slide show speed.
Press the ▲ or ▼ button to select the required option(Fast,
Normal, Slow), then press the ENTER button.
Background Music:
Select to choose whether you want to play an MP3 file during a
slide show.
Press the ▲ or ▼ button to select the required option(On, Off),
then press the ENTER button.
Background Music Setting:
While the slide show is in progress, MP3 files and folders under
the same directory are displayed.
Select a folder using the ▲ or ▼ button and press the
ENTER button. The selected folder will be highlighted.
Press the RETURN button again to return to the slide show
screen. The selected background music is played.
If you turn Off the Background Music, even if the Background
Music Settings have been set up, the background music will
not be played.
List:
The file information is displayed as a folder or JPEG file.
To exit WISELINK mode, press the W.LINK button on the remote
control.
When selecting a photo file, the photo file information is
displayed on the left side of the TV screen, such as the
resolution, the date modified and the order of the file in the
current directory (e.g. 10th out of 15).
Continued...
: Folder icon
: Photo icon
: Move to the previous
folder stage icon
Photo 0001
File 2
File 4
File 9 File 10 File 11 File 12 File 13
File 5 File 6 File 7 File 8
None
1/10 Page
Photo
400x340
53 KB
May 1, 2007
1 / 14
CELLDISK2.0
315MB/495MB
Photo 0001
Select Move Enter Option Return
Photo 0001
File 2
File 4
File 9 File 10 File 11 File 12 File 13
File 5 File 6 File 7 File 8
None
1/10 Page
Photo
400x340
53 KB
May 1, 2007
1 / 14
CELLDISK2.0
315MB/495MB
Photo 0001
Select Move Enter Option Return
Photo
400x340
53 KB
May 1, 2007
1 / 14
Such as the resolution
Order of the file in the
current directory
Date modified
File size
Move Enter Return
◄◄
1/1 Page
►►
Exit
Slide Show Speed : Normal
Background Music : On
Background Music Setting
List
Exit
Slide Show Speed : Normal
Background Music : On
Background Music Setting
List
Fast
Normal
Slow
Off
On
BN68-01427A-Eng.indb 46 2008-03-10 오후 3:15:18
English - 47
Using the Option Menu
1 Complete Steps 1 to 3 of Using the WISELINK Menu.
(Refer to page 44)
2 Press the ◄ or ► button to move to Photo, then press the
ENTER button.
The saved file information is displayed as a folder or file.
3 Press the ▲, ▼, ◄ and ► button to select a file, then
press the ENTER button. Pressing the button over a photo
thumbnail displays the photo in full screen.
4 Press the INFO button to display the option (Start Slide
Show, Zoom, Rotate, List)
Zoom:
Press the ▲ or ▼ button to select Zoom, then press the
ENTER button.
Each time the ▲ or ▼ button is pressed, the photo size
increases.(X1 → X2 → X4 )
- X1 : Restore a photo to its original size.
- X2 : Zoom-in to a photo x2.
-
X4 : Zoom-in to a photo x4.
To pan up/down/left/right in the zoomed-in photo, press the
INFO button to remove option menu, then press the ▲, ▼, ◄
and ► buttons.
The Rotate, Start Slide Show option is disabled when the Zoom option is selected.
Rotate:
Press the ▲ or ▼ button to select Rotate, then press the
ENTER button.
Each time the ▲ or ▼ button is pressed, the photo rotates
repeatedly.
- 0º : This rotates a photo to its original position
- 90º : This rotates a photo by 90 degrees
- 180
º : This rotates a photo by 180 degrees
- 270º
: This rotates a photo by 270 degrees
The rotated file is not saved.
The Zoom, Start Slide Show option is disabled when the Rotate option is selected.
Exit
Start Slide Show
Zoom X1
Rotate 0º
List
Exit
Start Slide Show
Zoom X1
Rotate 0º
List
X1
X2
X4
Exit
Start Slide Show
Zoom X1
Rotate 0º
List
0º
90º
180º
270º
BN68-01427A-Eng.indb 47 2008-03-10 오후 3:15:20
English - 48
Using the MP3 List
This menu shows MP3 files from among the files saved on a
USB memory device.
1 Complete Steps 1 to 3 of Using the WISELINK Menu.
(Refer to page 44)
2 Press the ◄ or ► button to move to Music, then press the
ENTER button.
The saved file information is displayed as a folder or file.
3 Press the ▲ or ▼ button to move to an icon, then press the
ENTER button.

Pressing the ENTER button over a musical note
icon immediately plays the music file.
Pressing the ENTER button over a folder icon
shows the music files included in the folder.
To select a file on the next page, press the REW or
FF button to move to the next page.
4 To select all files or a file, press the INFO button to display
the Music menus.
Press the ENTER button to select Play, Repeat Music or
Select All.
To exit WISELINK mode, press the W.LINK button on the
remote control.
Using the Option Menu
Play:
Select to play MP3 files.
Press the PLAY/PAUSE button while playing an MP3 file to pause the file.
Press the STOP button to exit Play mode.
This menu only shows files with the MP3 file extension. Files with other file extensions are not
displayed,even if they are saved on the same USB device.
The selected file is displayed on the top with its playing time.
To adjust the music volume, press the + or - button on the remote control. To mute the
sound, press the MUTE button on the remote control.
Press FF or REW buttons to change pages.
Repeat Music:
Select to repeatedly play MP3 files in the current folder.
You can select On or Off
Music function information icon
Icon Function
When all music files are being played.
When a music file is being played.
When pressing the PLAY/PAUSE button on the remote
control while music is playing.
When pressing the STOP button on the remote control
when music is stopped. The music resumes and the
Stop text appears at the top of the screen.
Select All:
Select to play all MP3 files in the current folder.
Music
CELLDISK2.0
315MB/495MB Free
Music SetupPhoto
Move Enter Return
: Folder icon
: Music list icon
: Move to the previous
folder stage icon
Music
5959 KB
Nov 14, 2007
6/14
Upper Folder
Folder 1
001 Swan Song feat.TBNY 00:04:01
002 Beatles-Yesterday 00:04:28
003 Fall in Love 00:04:12
004 Tom Waits-Time 00:05:39
005 Chuk Mangione-Feel So good 00:04:30
006 Nat King Cole-Fly me to the moon 00:05:25
007 Ryuichi Sakamoto-Rain 00:04:30
008 Bon jovi-This ain’t a love song 00:03:54
Nat King Cole-Fly me to the moon
00:04:00
Select Move Enter Option Return
Play
Repeat Music Off
Select All
Exit
BN68-01427A-Eng.indb 48 2008-03-10 오후 3:15:29
English - 49
Using the Setup Menu
Setup displays the user settings of the WISELINK menu.
1 Complete Steps 1 to 3 of Using the WISELINK Menu.
(Refer to page 44)
2 Press the ◄ or ► button to move to Setup, then press the
ENTER button.
3 Press the ▲ or ▼ button to select an item you want, then
press the ENTER button.
(Slide Show Speed, Background Music, Background
Music Setting, Repeat Music, Screen Saver)
4 Press the ▲ or ▼ button to select the option, then press the
ENTER button.
To exit WISELINK mode, press the W.LINK button on the
remote control.
Slide Show Speed:
Select to control the slide show speed.
You can select Fast, Normal or Slow.
Background Music:
Select to determine whether to play an MP3 file during a slide
show.
You can select Music Off or Music On.
Background Music Setting:
While a slide show is in progress, use the Background Music
Setting to select a music file to listen to.
Select a MP3 file as the background music.
Continued...
Slide Show Speed : Normal
Background Music : On
Background Music Setting
Repeat Music : On
Screen Saver : 5 min
Move Enter Return
Music SetupPhoto
Move Enter Return
Slide Show Speed : Fast
Background Music : On
Background Music Setting
Repeat Music : On
Screen Saver : 5 min
Move Enter Return
Fast
Normal
Slow
Move Enter Return
Slide Show Speed : Fast
Background Music : On
Background Music Setting
Repeat Music : On
Screen Saver : 5 min
Off
On
Move Enter Return
◄◄
1/1 Page
►►
BN68-01427A-Eng.indb 49 2008-03-10 오후 3:15:30
English - 50
Repeat Music:
Select to determine whether to repeat playing the music when all
MP3 files in the current folder have been played.
Screen Saver:
Select to set the waiting time before the screen saver appears.
The screensaver will appear when no button is pressed for 1, 5 or
10 minutes.
Move Enter Return
Slide Show Speed : Fast
Background Music : On
Background Music Setting
Repeat Music : On
Screen Saver : 5 min
1min.
5min.
10min.
Move Enter Return
Slide Show Speed : Fast
Background Music : On
Background Music Setting
Repeat Music : On
Screen Saver : 5 min
Off
On
BN68-01427A-Eng.indb 50 2008-03-10 오후 3:15:31
English - 51
What is Anynet
+
?
Anynet
+
is an AV network system that enables an easy-to-use AV interface for users by controlling
all connected AV devices through the Anynet
+
menu when Samsung Electronics AV devices are
connected.
Connecting Anynet
+
Devices
The Anynet
+
system supports AV devices supporting Anynet
+
only.
Check if there is an Anynet
+
mark on the AV device to be connected to the TV.
To directly connect to TV
Connect the [HDMI 1], [HDMI
2] or [HDMI 3] jack on the TV
and the HDMI OUT jack of the
corresponding Anynet
+
device
using the HDMI cable.
To connect to Home Theatre
1 Connect the [HDMI 1],
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet
+
device using the HDMI
cable.
2 Connect the HDMI IN jack
of the home theatre and
the HDMI OUT jack of the
corresponding Anynet
+
device using the HDMI
cable.

Connect only the optical cable between [Digital Audio Out (Optical)] on your TV and Digital Audio
Input on the receiver.

Connect only one receiver.

You can listen to 5.1 channel sound through the home theatre’s speakers. Otherwise, you can only
listen to 2 channel stereo sound in other cases. Make sure to connect the Digital Audio IN (Optical) of
the home theatre and the TV correctly to listen to TV sound through the home theatre. However, you
cannot listen to sound from the BD recorder that is sent to the home theatre via the TV in 5.1 channel
sound because the TV outputs only 2 channel stereo sound. Please see the manual for the home
theatre.

You can connect an Anynet
+
device using the HDMI cable. Some HDMI cables may not support
Anynet
+
functions.

Anynet
+
works when the AV device supporting Anynet
+
is in the Standby or On status.

Anynet
+
supports up to 8 AV devices in total.
Anynet
+
Device 1 Anynet
+
Device 2
Anynet
+
Device 3
TV
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
TV
Anynet
+
Device 1 Anynet
+
Device 2
Anynet
+
Device 3
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
Home Theatre
Optical Cable
BN68-01427A-Eng.indb 51 2008-03-10 오후 3:15:33
English - 52
Setting Up Anynet
+
The following settings are to use Anynet
+
functions.
Using the Anynet
+
Function
1 Press the MENU button to display the menu. Press the ▲ or ▼
button to select Input, then press the ENTER button.
2 Press the ▲ or ▼ button to select Anynet
+
(HDMI-CEC), then
press the ENTER button.
3 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
4 Press the ▲ or ▼ button to select Anynet
+
(HDMI-CEC), then
press the ENTER button.
5 Press the ▲ or ▼ button to select On, then press the ENTER
button.

The Anynet
+
(HDMI-CEC) function is enabled.

If you select Off, Anynet
+
(HDMI-CEC) is disabled.

When the Anynet
+
(HDMI-CEC) function is disabled, all the
Anynet
+
related operations are deactivated.
Turning an Anynet
+
Device Off Automatically when the TV is
Turned Off
4 Press the ▲ or ▼ button to select Auto Turn Off, then press
the ENTER button.
5 Press the ▲ or ▼ button to select Yes, then press the
ENTER button.

The Auto Turn Off function is enabled.

If you select No, the Auto Turn Off function is canceled.
Press the EXIT button to exit.

The Select Device setting of the TV remote control is to be set
to TV to use the Anynet
+
function.

If you set Auto Turn Off to Yes, connected external devices
are also turned off when the TV is turned off. However, if the
device is recording, it may not be turned off.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ENTER button to select Anynet+ (HDMI-CEC).
Scanning and Switching between Anynet
+
Devices
1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input, then press the
ENTER button.
2 Press the ▲ or ▼ button to select Anynet
+
(HDMI-CEC), then
press the ENTER button.
3 Press the ▲ or ▼ button to select Select Device, then press
the ENTER button.
4 Press the ▲ or ▼ button to select to a particular device and
press the ENTER button.
It is switched to the selected device.
5
If you cannot find a device you want, press the ▲ or ▼ button to select
Searching Connections, then press the ENTER button.
The meassage Configuring Anynet
+
connection... is displayed.
When searching devices completes, the connected devices are listed
in the Anynet
+
menu.

Switching to the selected devices may take up to 2 minutes. You
cannot cancel the operation during the switching operation.

The time required to scan for devices is determined by the number of
connected devices.

When the device scan is complete, the number of found devices is not
displayed.

Although the TV automatically scans devices when it is turned on using
the POWER button, devices connected when the TV is on or under a
specific circumstance are not displayed in the device list. Therefore
select Searching Connections menu to search devices.

If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet
+
function.
Make sure to switch to an Anynet
+
device by using the TOOLS button.
Continued...
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Move
Enter
Exit
Setup
Anynet
+
(HDMI-CEC)
: Off
Auto Turn Off
: Off
Searching Connections
Enter ReturnMove
Off
On
Enter
Move
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver :Off
Setup
TV P 1
Return
Enter
Move
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver :Off
Setup
TV P 1
Return
DVDR1
DVDR2
DVD1
DVD2
Setup
Anynet
+
(HDMI-CEC)
: On
Auto Turn Off :
: Off
Searching Connections
Enter ReturnMove
No
Yes
Setup
Anynet
+
(HDMI-CEC)
: On
Auto Turn Off
: Yes
Searching Connections
Enter ReturnMove
BN68-01427A-Eng.indb 52 2008-03-10 오후 3:15:34
English - 53
Anynet
+
Menu
The Anynet
+
menu changes depending on the type and status of the Anynet
+
devices connected
to the TV.
Anynet
+
Menu Description
View TV Switches from Anynet
+
to TV broadcast mode.
Select Device Your TV connects to the corresponding device.
Record Starts a recording. (This menu works only for a device supporting
recording.)
Menu on Device Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder’s
title menu appears.
Device Operation Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control
menu of the DVD Recorder appears.
Receiver Sound is output through the receiver.
Setup You can set the environment for using Anynet
+
.
TV Remote Control Buttons Available in Anynet
+
Mode
Device Type Operating Status Available Buttons
Anynet
+
Device
After switching to the
device, when the menu of
the corresponding device is
displayed on the screen.
Numeric buttons
▲/▼/◄/►/ENTER buttons
Colour buttons
EXIT button
After switching to the device,
while playing a file
W.LINK
(Backward search)
W.LINK
(Forward search)
W.LINK
(Stop)
W.LINK
/
W.LINK
(Play/Pause)
Device with built-in Tuner
After switching to the device,
when you are watching a TV
programme
P
W.LINK
/
W.LINK
button
Audio Device When a Receiver is activated
W.LINK
/
W.LINK
button
MUTE button

The Anynet+ function only works when the remote control is set to TV.

The REC button works only while in the recordable state.

You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+
devices only using the TV remote control.

The TV remote control may not work under certain conditions. In this case, reselect the Anynet+
device.

The Anynet+ functions don’t operate for the products from other manufacturers.

In Anynet+ mode, the colour buttons may not work properly.

The
W.LINK
,
W.LINK
operations may differ depending on the device.
Recording
You can make a recording of a TV programme using a recorder.
Press the REC button.
Recording begins. (Only when the Anynet
+
enabled recording device is connected.)

The current TV programme is recorded in the Watching TV status. If you are watching video from
another device, the video from the device is recorded.

You can also record the source streams by selecting Record after pressing the TOOLS button.

Before recording, check whether the antenna jack is properly connected to the recording device.
For the antenna connection to the recording device, refer to its user manual.
BN68-01427A-Eng.indb 53 2008-03-10 오후 3:15:37
English - 54
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Input, then press the ENTER button.
2 Press the ▲ or ▼ button to select Anynet
+
(HDMI-CEC), then press the ENTER
button.
3 Press the ▲ or ▼ button to select Receiver, then press the ENTER button.
4 Press the ◄ or ► button to select to On, then press the ENTER button.
Now you can listen to sound through the receiver.
5 Press the EXIT button to exit.
When the receiver is set to On, you can listen to the TV sound through the 2-channel
receiver.
If the receiver is exclusively for a home theater only (supporting audio only), it may
not appear in the device list.
Only when you have connected the optical jack of the TV and the receiver properly,
does Receiver work.
In case of a content with copyright problems, listening through the receiver may not properly operate.
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or
a power failure), the TV Speaker may be set to Off when you turn the TV on again. (see page 23)
Check Points before Requesting Service
Symptom Solution
Anynet
+
does not work. ■ Check if the device is an Anynet
+
device. The Anynet
+
system
supports Anynet
+
devices only.
■ Connect only one receiver.
■ Check if the Anynet
+
device power cord is properly connected.
■
Check the Anynet
+
device’s Video/Audio/HDMI 1.3 cable connections.
■ Check whether Anynet
+
(HDMI-CEC) is set to On in the Anynet
+
setup menu.
■ Check whether the TV remote control is in TV mode.
■ Check whether it is Anynet
+
exclusive remote control.
■ Anynet
+
doesn’t work at a certain condition. (Searching channels)
■ When connecting or removing the HDMI 1.3 cable, please make
sure to search devices again or restart your TV.
■ Check if the Anynet
+
Function of Anynet
+
device is set on.
I want to start Anynet
+
. ■ Check if the Anynet
+
device is properly connected to the TV and
check if the Anynet
+
(HDMI-CEC) is set to On in the Anynet
+
Setup
menu.
■ Press the TV button on the TV remote control to switch to TV. Then
press the TOOLS button to show the Anynet
+
menu and select a
menu you want.
I want to exit Anynet
+
. ■ Select View TV in Anynet
+
menu.
■ Press the SOURCE button on the TV remote control and select a
device other than Anynet
+
devices.
■ Press any of CH, CH LIST, and PRE-CH to change to the
TV mode. (Note that the channel button operates only when a
tuner-embedded Anynet
+
device is not connected.)
The message Connecting to
Anynet
+
device… appears on
the screen.
■ You cannot use the remote control when you are configuring
Anynet
+
or switching to a view mode.
■ Use the remote control when the Anynet
+
setting or switching to
view mode is complete.
The Anynet
+
device does not
play.
■ You cannot use the play function when Plug & Play is in progress.
The connected device is not
displayed.
■ Check whether or not the device supports Anynet
+
functions.
■ Check whether or not the HDMI 1.3 cable is properly connected.
■ Check whether Anynet
+
(HDMI-CEC) is set to On in the Anynet
+
setup menu.
■ Search Anynet
+
devices again.
■ You can connect an Anynet
+
device using the HDMI 1.3 cable only.
Some HDMI cables may not support Anynet
+
functions.
The TV programme cannot be
recorded.
■ Check whether the antenna jack on the recording device is properly
connected.
The TV sound is not output
through the receiver.
■ Connect the optical cable between TV and the receiver.
Enter
Move
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver :On
Setup
TV P 1
Exit
BN68-01427A-Eng.indb 54 2008-03-10 오후 3:15:38
English - 55
Teletext Feature (depending on the model)
Most television stations provide written information services
via teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can select
various options to suit your requirements by using the remote
control buttons.
For teletext information to be displayed correctly, channel reception
must be stable. Otherwise, information may be missing or some
pages may not be displayed.
1
TV/DTV
Exit from the teletext display (depending on the model)
2
(store)
Used to store the teletext pages.
3
(size)
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again.
To display normal screen, press it once again.
4
(reveal)
Used to display the hidden text (answers to quiz games, for
example). To display normal screen, press it again.
5
Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the
different topics covered on a teletext page are colour-coded and
can be selected by pressing the coloured buttons. Press one of
them corresponding to the required. The page is displayed with
other coloured information that can be selected in the same way.
To display the previous or next page, press the corresponding
coloured button.
6
(teletext on/mix)
Press to activate teletext mode after selecting the channel providing
the teletext service. Press it twice to overlap the teletext with the
current broadcasting screen.
7
(mode)
Press to select the teletext mode (LIST/FLOF).
If you press it in the LIST mode, it switches into the List save mode.
In the List save mode, you can save teletext page into list using the
(store) button.
8
(sub-page)
Used to display the available sub-page.
9
(page up)
Used to display the next teletext page.
0
(page down)
Used to display the previous teletext page.
!
(index)
Used to display the index (contents) page at any time while you are viewing teletext.
@
(hold)
Used to hold the display on a given page if the selected page is
linked with several secondary pages
which follow on automatically. To resume, press it again.
#
(cancel)
Used to display the broadcast when searching for a page.
You can change teletext pages by pressing the numeric buttons
on the remote control.
Continued...
BN68-01427A-Eng.indb 55 2008-03-10 오후 3:15:41
English - 56
The teletext pages are organized according to six categories:
Part Contents
A
B
C
D
E
F
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)
Press the TV/DTV button to exit from the teletext display.
BN68-01427A-Eng.indb 56 2008-03-10 오후 3:15:42
English - 57
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your nearest dealer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
Product Family inch VESA Spec. (A * B) Standard Screw Quantity
LCD-TV
23 ~ 26 200
*
100 M4
4
32 ~ 40 200
*
200 M6
46 ~ 52
400 * 400
600 * 400
M8
57
700 * 400
(No VESA)
57 ~ 70 800 * 400
80 ~ 1400 * 800
PDP-TV
42 ~ 58
400 * 400
600 * 400
M8
4
63
676 * 407
(No VESA)
6
63 ~ 70 800 * 400 4
80 ~ 1400 * 800 4

We provided the standard dimensions for wall mount kits as shown in the table above.

When purchasing our wall mount kit, a detailed installation manual and all parts necessary for
assembly are provided.

Do not use screws longer than the standard dimension, as they may cause damage to the inside of
the TV set.

For wall mounts that do not comply with the VESA standard screw specifications, the length of the
screws may differ depending on their specifications.

Do not use screws that do not comply with the VESA standard screw specifications.
Do not use fasten the screws too strongly, this may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.

Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall
mount is used or the consumer fails to follow the product installation instructions.

Our 57” and 63” models do not comply with VESA Specifications. Therefore, you should use our
dedicated wall mount kit for this model.

Do not exceed 15 degrees tilt when mounting this TV.

Do not install your Wall Mount Kit while your TV is turned on.
It may result in personal injury due to electric shock.
BN68-01427A-Eng.indb 57 2008-03-10 오후 3:15:43
English - 58
Serial Cable(1P to 1P)(Not supplied)
Rear Panel
Auto Wall-Mount
Wall- mount adjustment (Sold separately)
Once the auto wall mount is installed, the position of your TV can be easily adjusted.
Entering the menu
1
Press the ▲, ▼, ◄ or ► button on your remote control.
The Wall Mount Adjustment screen is displayed.
If the Wall Mount Adjustment screen is not displayed when
clicking on a direction button while watching your TV, use the
menu to display that screen.
• Press the
MENU button to display the menu. Press the ▲ or ▼
button to select Setup, then press the ENTER button.
• Press the ▲ or ▼ button to select
Auto Wall-Mount, then press
the ENTER button.
Remembering the Position
2 Adjust to the desired position using the ▲, ▼, ◄, ► buttons.
If you press an arrow button when no OSD is displayed on the
TV screen, the Adjustment screen appears.
Press the
INFO button to reset. Press the ◄ or ► button to
select Yes, then press the ENTER button. The position is
initialized to the default setting.
3 Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position1, Position2 or Position3 in order to save the current
position.
To not save the current position, press the
RETURN button.
When selecting a save mode, you cannot use the Color buttons.
4
Press the ENTER button to save.
When
Position1 is selected, the message Current position
saved as Position1 is displayed.
5
Press the ENTER button.
The saved Position appears on the left side of the OSD.
Continued...
Move
Enter
Return
Plug & Play
Language : English
Time
Light Effect
:
In Standby
Auto Wall-Mount
Melody : Off
Entertainment
: Off
Energy Saving :
Off
PIP
Setup
T V
Save
Return
Adjust
Enter
Select a mode to Save.
Position 1
Position 2
Position 3
Auto Wall-Mount
Position1
Adjust Save
Position
1 2 3
Center
INFO
BN68-01427A-Eng.indb 58 2008-03-10 오후 3:15:45
English - 59
How to assemble the Stand-Base (depending on the model)
Using the 6 screws for securing the stand base and the
monitor, firmly attach the monitor to the stand base.
(The exterior of the set may be different than the picture.)
In case of installing your TV on the wall,
close the cover (1) on the stand-base
connection part using two screws for
hiding.
Warning
Firmly secure the stand to the TV
before moving it, as the stand may
fall and could cause serious injury.

Two or more people should carry
the TV. Never lay the TV on the
floor because of possible damage
to the screen.
Always store the TV upright.
Moving to the remembered position
1
Complete Step 1 of Entering the menu.
2 Pressing a Color (Red, Green, Yellow) button moves the auto wall
mount to the saved position.
You can move the wall mount to one of the 3 pre-set positions
by pressing the Red (Position 1), Green (Position 2) or Yellow
(Position 3) buttons.
If you adjust the positon after moving to a pre-set position, the
position display will disappear.
For installation, refer to the Installation Manual provided with the wall
mount.
For product installation and the installation and moving of the wall mount, make sure to consult a specialized
installation company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
materials, please contact your nearest dealer.
The auto wall mount will not work when Anynet+ or WISELINK is operating.
42 inches model is not compatible with the older wall mount model (WMN5090A).
Auto Wall-Mount
Adjust
Save
Position 1 2 3
Center
INFO
►
►
►
►
►
►
►
►
Position 1
BN68-01427A-Eng.indb 59 2008-03-10 오후 3:15:49
English - 60
Troubleshooting
Before contacting the Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of
the television and contact your local dealer.
No sound or picture
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the (Power) button (On/Off) on the front panel or press the POWER
button on the remote control.
Check the picture contrast and brightness settings.
Check the volume.
Check if TV Speaker is set to Off.
Normal picture but no sound
Check the volume.
Check whether the volume MUTE button on the remote control has been pressed.
No picture or black and white picture
Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture interference
Try to identify the electrical appliance that is affecting the television, then move it further away.
Plug the television into a different main socket.
Blurred or snowy picture, distorted sound
Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check that the “+” and “–” ends of the batteries are inserted correctly.
Check that the batteries are drained.
Screen is black and power indicator light blinks steadily
On your computer check; Power, Signal Cable.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
On your equipment check (STB, DVD, etc) ; Power, Signal Cable.
The TV is using its power management system.
Press the Source button on the panel or remote control.
Turn the TV off and on.
The damaged picture appears in the corner of the screen.
If Just Scan is selected in some external devices, the damaged picture may appear in the corner of
the screen. This symptom is caused by external devices, not TV.
The "Resets all settings to the default values" message appears.
This appears when you press and hold the EXIT button for a while. The product settings are reset to
the factory defaults.
BN68-01427A-Eng.indb 60 2008-03-10 오후 3:15:49
English - 61
Specifications
The descriptions and characteristics in this booklet are given for information purposes only and
are subject to modification without notice.
Model Name PS50A556/PS50A557 PS50A558
Screen Size (Diagonal) 50 inch
PC Resolution
1920 x 1080 @ 60 Hz
Sound (Output) 10 W + 10 W
Dimension (WxHxD)
Body
With stand
1231 x 770 x 95 mm
1231 x 831 x 320 mm
1231 x 762 x 95 mm
1231 x 831 x 320 mm
Weight
Body
With stand
38 Kg
42 Kg
Environmental
Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10 °C to 40 °C (50 °F to 104 °F)
10% to 80%, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5% to 95%, non-condensing
This device is a Class B digital apparatus.
Design and specifications are subject to change without prior notice.
For the power supply and Power Consumption, refer to the label attached to the product.
BN68-01427A-Eng.indb 61 2008-03-10 오후 3:15:49
This page is intentionally
left blank.
BN68-01427A-Eng.indb 62 2008-03-10 오후 3:15:50
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature, indicates that it
should not be disposed with other household wastes at the end of its
working life.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of
wastes and recycle it responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details
of where and how they can take this item for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
BN68-01427A-Eng.indb 63 2008-03-10 오후 3:15:50
/