Sylvania TV DVD Combo SRTD309 Manual de usuario

Marca: Sylvania

Modelo: TV DVD Combo SRTD309

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Este manual también es adecuado para

9-INCH COLOR TV/DVD

SRTD309

OWNER’S

MANUAL

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

As an ENERGY STAR

Partner, our company has

determined that this product meets

the E

NERGY STAR guidelines for

energy efficiency. E

NERGY STAR is

a U.S. registered mark.

This Owner’s Manual is made of

recycled paper.

If you need additional assistance for set-up or operating after

reading owner’s manual, please call TOLL FREE : 1-800-968-3429.

Please read before using this equipment

TD005.QX33 04.7.30 1:34 PM Page 1

–

0C28

–

1.Read instructions-All the safety and operating instructions

should be read before the appliance is operated.

2.Retain Instructions-The safety and operating instructions

should be retained for future reference.

3.Heed Warnings-All warnings on the appliance and in the

operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions

should be followed.

5.Cleaning-Unplug TV/DVD from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the possi-

bility of the loss of an authorization code for a CATV con-

verter, is not intended to be unplugged by the user for clean-

ing or any other purpose, may exclude the reference to

unplugging the appliance in the cleaning description other-

wise required in item 5.

6.Attachments-Do not use attachments not recommended by

the TV/DVD manufacturer as they may cause hazards.

7.Water and Moisture-Do not use this TV/DVD near water-

for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool,

and the like.

8.Accessories-Do not place this TV/DVD on an unstable cart,

stand, tripod, bracket, or table. The TV/DVD may fall, caus-

ing serious injury to someone, and serious damage to the

appliance. Use only with a cart, stand, tripod, bracket, or

table recommended by the manufacturer, or sold with the

TV/DVD. Any mounting of the

appliance should follow the manu-

facturer’s instructions and should use

a mounting accessory recommended

by the manufacturer. An appliance

and cart combination should be

moved with care.

Quick stops, excessive force, and

uneven surfaces may cause the appli-

ance and cart combination to over-

turn.

Accessoires- Ne placez pas cette TV/DVD sur une table

roulante, un support, un trépied, une console ou une table

instable. Cette TV/DVD risquerait de tomber, pouvant

gravement blesser quelqu'un et l'appareil même pourrait

être sérieusement endommagé. N'utilisez qu'une table

roulante, un support, un trépied, une console ou une table

recommandé par le fabriquant, ou vendu avec la TV/DVD.

Pour n'importe quelle installation de l'appareil, on devra

suivre les instructions du fabriquant et l'on devra utiliser les

accessoires d'installation recommandés par le fabriquant.

L'ensemble combiné de l'appareil avec une table roulante

devra être déplacé avec précaution. Des arrêts brusques,

une force excessive et des surfaces inégales peuvent provo-

quer le renversement de l'ensemble combiné de

l'appareil/table roulante.

9. Ventilation-Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reliable

operation of the TV/DVD and to protect it from overheat-

ing, and these openings must not be blocked or covered.

The openings should never be blocked by placing the

TV/DVD on a bed, sofa, rug, or other similar surface. This

TV/DVD should never be placed near or over a radiator or

heat register. This TV/DVD should not be placed in a built-

in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s instructions

have been adhered to.

10.Power Sources-This TV/DVD should be operated only

from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local power

company. For TV/DVDs intended to operate from battery

power, or other sources, refer to the operating instructions.

11.Grounding or Polarization-This TV/DVD is equipped

with a polarized alternating-current line plug(a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try revers-

ing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSON-

NEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRESENT

WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE

APPLIANCE.

The caution marking is located on the rear of the cabinet.

PORTABLE CART WARNING

AVERTISSEMENT POUR UNE

TABLE ROULANTE PORTATIVE

S3126A

IMPORTANT SAFEGUARDS

TD005.QX33 04.7.30 1:34 PM Page 2

–

0C28

–

GROUND CLAMPS

NEC - NATIONAL ELECTRI CAL CODE

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

S2898A

WIRE

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

ELECTRODE SYSTEM

(NEC ART 250, PART H)

SERVICE

EQUIPMENT

CLAMP

ANTENNA

L EAD IN

ANTENNA

POWER SERVICE GROUNDING

GROUND

ELECTRIC

FIGURE A

12.Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience receptacles,

and the point where they exit from the appliance.

13.Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the TV/DVD, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with respect to

proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna-discharge

unit, connection to grounding electrodes, and requirements

for the grounding electrode. (Fig. A)

14.Lightning-For added protection for this TV/DVD receiver

during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will

prevent damage to the TV/DVD due to lightning and

power-line surges.

15.Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them

might be fatal.

16.Overloading-Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind

into this TV/DVD through openings as they may touch dan-

gerous voltage points or short out parts that could result in

a fire or electric shock. Never spill liquid of any kind on

the TV/DVD.

18.Servicing-Do not attempt to service this TV/DVD yourself

as opening or removing covers may expose you to danger-

ous voltage or other hazards. Refer all servicing to qualified

service personnel.

19.Damage Requiring Service-Unplug this TV/DVD from

the wall outlet and refer servicing to qualified service per-

sonnel under the following conditions:

a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the

TV/DVD.

c. If the TV/DVD has been exposed to rain or water.

d. If the TV/DVD does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions, as improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualified technician to restore

the TV/DVD to its normal operation.

e. If the TV/DVD has been dropped or damaged in any way.

f. When the TV/DVD exhibits a distinct change in perfor-

mance-this indicates a need for service.

20.Replacement Parts-When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock, injury to persons or other haz-

ards.

21.Safety Check-Upon completion of any service or repairs to

this TV/DVD, ask the service technician to perform routine

safety checks to determine that the TV/DVD is in proper

operating condition.

22.Heat-This TV/DVD product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

TD005.QX33 04.7.30 1:34 PM Page 3

–

0C28

–

RADIO-TV INTERFERENCE

This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pur-

suant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be deter-

mined by turning the equipment off and on, the

user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment

and receiver.

3) Connect the equipment into an outlet on a cir-

cuit different from that to which the receiver is

connected.

4) Consult the dealer or an experienced radio/TV

technician for help.

FCC WARNING- This equipment may gener-

ate or use radio frequency energy. Changes or

modifications to this equipment may cause

harmful interference unless the modifications

are expressly approved in the instruction man-

ual. The user could lose the authority to oper-

ate this equipment if an unauthorized change

or modification is made.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public perfor-

mance and lending of discs are prohibited.

LASER SAFETY

This unit employs a laser. Only a qualified service

person should remove the cover or attempt to ser-

vice this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUST-

MENTS OR PERFORMANCE OF PROCE-

DURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN AND INTERLOCK

DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK

MECHANISM.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est con-

forme à la norme NMB-003 du Canada.

PRECAUTIONS

The serial number of this product may be found on the back of the unit. No other TV/DVD has the same serial

number as yours. You should record the number and other vital information here and retain this book as a per-

manent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable

and can be reused. Please dispose of any materials

in accordance with your local recycling regula-

tions.

Batteries should never be thrown away or inciner-

ated but disposed of in accordance with your local

regulations concerning chemical wastes.

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC

ÉLECTRIQUES, INTRODUIRE LA LAME LA

PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE

ET POUSSER JUSQU’AU FOND.

TD005.QX33 04.7.30 1:34 PM Page 4

–

0C28

–

AV OID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

LOCATION

For safe operation and satisfactory performance of

your TV/DVD, keep the following in mind when

selecting a place for its installation:

•

Shield it from direct sunlight and keep it away from

sources of intense heat.

•

Avoid dusty or humid places.

•

Avoid places with insufficient ventilation for proper

heat dissipation. Do not block the ventilation holes at

the top and bottom of the unit. Do not place the unit

on a carpet because this will block the ventilation

holes.

•

Install unit in a horizontal position.

•

Avoid locations subject to strong vibration.

•

Do not place the TV/DVD near strong magnetic fields.

•

Avoid moving TV/DVD to locations where temper-

ature differences are extreme.

•

Do not handle the power cord with wet hands.

•

Do not pull on the power cord when disconnecting

it from an AC wall outlet. Grasp it by the plug.

•

If, by accident, water is spilled on your unit, unplug

the power cord immediately and take the unit to our

Authorized Service Center for servicing.

•

Do not put your fingers or objects into the

TV/DVD disc loading tray.

•

Do not place anything directly on top of the unit.

WARNING

Moisture condensation may occur inside the unit

when it is moved from a cold place to a warm place,

or after heating a cold room or under conditions of

high humidity. If a DVD is played in a TV/DVD

which has moisture, it may damage the DVD and

TV/DVD. Therefore when the condensation occurs

inside the unit, turn POWER on and allow at least 2

hours for the unit to dry out.

The following symbols below appear in some head-

ings and notes in this manual, with the following

meanings

: Description refers to TV operation (in the TV mode).

: Description refers to playback of DVD video discs

(in the DVD mode).

: Description refers to playback of audio CDs

(in the DVD mode).

: Description refers to playback of MP3 discs

(in the DVD mode).

: Description refers to the items to be set by the

QUICK mode (in the DVD mode).

QUICK

MP3

DVD-V

SYMBOLS USED IN THIS MANUAL

SUPPLIED ACCESSORY

•

Remote Control Unit

(PART NO.: NE210UD)

•

2 AA Batteries

•

Indoor Antenna

(PART NO.:

0EMN00723 or 0EMN01183)

•

Matching Adapter

(300ohm-75ohm)

(PART NO.: 1813641 or

1780258 or UCPGANTPK004)

•

Car Battery Cord

(PART NO.: WPC0202GA001

or WPC0202HHH01)

TD005.QX33 04.7.30 1:34 PM Page 5

–

0C28

–

TABLE OF CONTENTS

C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2

C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4

C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

OPERATING CONTROLS AND FUNCTIONS

. . .8

INSTALLING THE BATTERIES . . . . . . . . . . .9

C PREPARATION FOR USE . . . . . . . . . . . . . . .10

ANTENNA/CABLE CONNECTIONS . . . . . . .10

INDOOR ANTENNA . . . . . . . . . . . . . . . . . . .10

CONNECTING TO EXTERNAL INPUT JACKS

CONNECTING TO A STEREO SYSTEM . . . .11

CONNECTING TO AN AMPLIFIER

EQUIPPED WITH DIGITAL INPUT JACKS,

MD DECK OR DAT DECK (for DVD only) . .12

CONNECTING TO A RECEIVER WITH

DOLBY DIGITAL DECODER (for DVD) . . . .12

C MOBILE CONNECTION . . . . . . . . . . . . . . . .13

TV SECTION

C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .14

CHANNEL SET UP FOR THE FIRST TIME . .14

DELETING (OR ADDING) CHANNEL . . . . .14

CHANNEL SET UP AGAIN . . . . . . . . . . . . . .15

SELECTING THE LANGUAGE . . . . . . . . . . .15

C TV OPERATION . . . . . . . . . . . . . . . . . . . . . . .16

WATCHING A TV PROGRAM . . . . . . . . . . . .16

DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .16

PICTURE CONTROL . . . . . . . . . . . . . . . . . . .16

SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .17

VD SECTION

C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .18

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .18

DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . .18

C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .19

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . .19

GENERAL FEATURES . . . . . . . . . . . . . . . . . .19

DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . .19

TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . .19

RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

STEP BY STEP PLAYBACK . . . . . . . . . . . . .20

FAST FORWARD/REVERSE SEARCH . . . . .20

SLOW FORWARD / SLOW REVERSE . . . . .20

ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

C SEARCH FUNCTION . . . . . . . . . . . . . . . . . .21

TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . .21

TITLE / CHAPTER SEARCH . . . . . . . . . . . . .21

TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . .21

MARKER SETUP SCREEN . . . . . . . . . . . . . .21

C SPECIAL PLAYBACK FUNCTION . . . . . . . .22

REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .22

RANDOM PLAYBACK . . . . . . . . . . . . . . . . .22

C PLAYING A MP3 DISC . . . . . . . . . . . . . . . . . .23

MP3 PLAYBACK . . . . . . . . . . . . . . . . . . . . . .23

TRACK SELECTION . . . . . . . . . . . . . . . . . . .23

PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .23

RANDOM PLAYBACK . . . . . . . . . . . . . . . . .23

C CHANGING THE SETTINGS . . . . . . . . . . . .24

SUBTITLE LANGUAGE . . . . . . . . . . . . . . . .24

AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . .24

STEREO SOUND MODE . . . . . . . . . . . . . . . .24

CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . .24

BLACK LEVEL SETTING . . . . . . . . . . . . . . .24

VIRTUAL SURROUND . . . . . . . . . . . . . . . . .24

C THE ON-SCREEN INFORMATION . . . . . . .25

C CHANGING THE DVD SETUP ITEMS . . . .26

LANGUAGE SETTING . . . . . . . . . . . . . . . . .26

DISPLAY SETTING . . . . . . . . . . . . . . . . . . . .27

AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . .27

PARENTAL CONTROL . . . . . . . . . . . . . . . . .28

C TROUBLESHOOTING GUIDE . . . . . . . . . . .29

C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .31

DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .31

C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .32

C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover

TD005.QX33 04.7.30 1:34 PM Page 6

–

0C28

–

TV Mode

DVD Mode

¡Dolby Digital sound

This player can handle Dolby Digital surround sound

having 5.1 channels when connected to a Dolby Digital

decoder.

¡Still/fast/slow/step playback

Various playback modes are available including still pic-

tures, fast forward/reverse, slow motion and step frames.

¡Random playback for audio CD and MP3

This player can shuffle the order of tracks to play them in

random order.

¡Program playback for audio CD and MP3

You can program the order of tracks to play them in any

desired order.

¡DVD menus in a desired language

You can display DVD menus in a desired language, if

available on a DVD.

¡Screen saver/Auto power-off functions

The screen saver program starts when there is no input

from the player for five minutes in the stop mode. When

the screen saver program is activated for 15 minutes, the

power is automatically turned off.

¡Subtitles in a desired language

You can select a desired language for the display subtitles,

if that language is available on a disc.

¡Selecting a camera angle

You can select the desired camera angle, if a disc contains

sequences recorded from different angles.

¡Choices for audio language and sound mode

You can select the desired audio language and sound mode,

if different languages and modes are available on a disc.

¡Parental lock

You can set the control level to limit playback of discs

which may not be suitable for children.

¡Automatic detection of discs

This player automatically detects if the loaded disc is

DVD, audio CD or MP3 on disc.

¡On-screen display

Information about the current operation can be displayed

on a TV screen, allowing you to confirm the currently

active functions (such as program playback), on the TV

screen using the remote control.

¡Search

Chapter search / Title search / Track search / Time search

¡Repeat

Chapter / Title / Track / Group / All / A-B

¡Zoom

Magnified screen can be displayed.

¡Marker

The part designated by user can be called back.

¡Resume Play

User can resume to playback from the part at which the

play was stopped.

¡Virtual Surround

¡Bit rate indication

¡DRC (Dynamic range control)

You can control the range of sound volume.

•

181 channel capability PLL frequency synthesiz-

er tuner with direct station call

(A converter may be necessary to view scrambled

cable channels.)

•

Infrared remote control

•

Trilingual on screen menu display selectable in

English, Spanish, or French

¡Sleep Timer

he Sleep Timer function enables you to shut off the power

without pressing POWER after a desired time period.

¡Auto Shut Off Function

If there is no air signal input from the antenna terminal and

no operation for 15 minutes, the TV will turn itself off

automatically.

FEATURES

TD005.QX33 04.7.30 1:34 PM Page 7

AUDIO OUT

DC 13.2V

COAXIAL

ANT.

40 4139

TV/DVD REAR VIEW

[Fig. 3]

–

0C28

–

6.CHANNEL K/L (CH.K/L) Buttons [page 14]

Press to select memorized channel.

Press to change to TV mode when DVD mode.

7.Remote Sensor Window

8.STOP Button [page 19]

Stops operation of the disc.

9.SKIP H Button [page 21]

Plays back from the beginning of the current

chapter or track.

SEARCH (REV) E Button (Front Panel)

[page 20]

During playback or in the pause mode, press and

hold button down

for a few seconds to change

reverse playback speed.

10. PLAY Button [page 19]

Starts playback of the disc contents.

Press to change to DVD mode when TV mode.

11. SKIP G Button [page 21]

Plays back from the beginning of the next chapter

or track.

SEARCH (FWD) D Button (Front Panel)

[page 20]

During playback or in the pause mode, press and

hold button down

for a few seconds to change for-

ward playback speed.

12. PAUSE Button [page 20]

Pauses the current disc operation.

13. OPEN/CLOSE Button [page 19]

Press to open disc tray to insert a disc or to open

to remove a disc.

14. HEADPHONE Jack

To connect headphone (not supplied) for personal

listening.

HEADPHONE

CHANNEL

VOLUMEPOWER

AUDIO

VIDEO

OPEN/CLOSE

PAUSE

SKIPSKIP

STOP PLAY

742 8

9 1011

6531

REV

SLOW

PLAY

STOP

FWD

ENTER

PAUSE

DISC

RETURNTITLESETUP

REPEATSEARCH MODE

CLEAR

MODE

ANGLESUBTITLEAUDIO

DISPLAY

SKIP

SELECT

POWER PICTURE

OPEN/

CH.

VOL.

MUTEZOOM

SLEEP

123

456

789

0 +10

+100

OPERATING CONTROLS AND FUNCTIONS

TV/DVD FRONT PANEL

REMOTE CONTROL

[Fig. 2]

[Fig. 1]

1.Disc loading tray

2.VIDEO input Jack [page 11]

Connect to the video output jack of a video

camera or VCR.

3.AUDIO L/R input Jacks [page 11]

Connect to the audio output jacks of a video

camera or VCR.

4.POWER Button [page 14]

Press to turn the power on and off.

5.VOLUME K/L (VOL. m/n) Buttons

Press to control the volume level for the DVD and TV.

TD005.QX33 04.7.30 1:34 PM Page 8

–

0C28

–

sequence being played back from a different angle.

29. REPEAT A-B [page 22]

Repeats playback of a selected section.

30. RETURN Button [page 24]

Returns to the previous operation.

31. ENTER Button [pages 14, 19]

Press to accept a setting.

32. Arrow Buttons

TV Mode: [page 14]

Press to select a setting mode from the menu on

the TV screen.

Press to select or adjust from a particular menu.

DVD Mode: [page 19]

Use when making settings while watching the

display on a TV screen.

33. DISC MENU Button [page 19]

Displays the menus in the DVD.

34. SELECT Button [pages 11, 19]

Press to change to TV mode, external input mode

or DVD mode.

35. MUTE Button

Press MUTE to turn off the sound

portion of the TV program. (Volume level display

turns LIGHT RED from LIGHT BLUE.) Press

MUTE again or press VOL. m or n to restore

sound.

36. PICTURE Button [page 16]

Press to enter picture adjustment mode.

37. Power cord

Connect to a standard AC outlet (120V/60Hz).

NOTE: Remove the power cord from the hook to

avoid breaking a wire before you connect

to a standard AC outlet.

38. AUDIO L/R analog output Jack

Connect to the analog audio input of an external

amplifier or stereo system.

39. COAXIAL digital audio out Jack (DVD Audio

Only)

Connect to the digital input of an external

amplifier or decoder.

40. ANT. in Jack

Connect to an antenna, cable system, or satellite

system.

41. DC 13.2V Jack

Connect to the Car Battery Cord.

NOTE: When you select the DVD mode by this

button, press PLAY or OPEN/CLOSE first.

Otherwise, the DVD features do not function.

15. MODE Button [pages 22-24]

Activates program playback or random playback mode

when playing CDs or MP3.

16. Number Button

TV Mode: [page 14]

Press two digits to directly access the desired

channel.

Remember to press a "0" before a single digit

channel.

+100 Button–

Press to select cable channels which are equal or

greater than number 100.

DVD Mode: [page 21]

Press to enter the desired number.

+10 Button–

Press to enter the desired numbers which are

equal or greater than number 10.

17. SLEEP Button [page 17]

Press SLEEP to display the sleep timer and start

the function. The shut off time can be determined

by the number of times you press this button. (0,

30, 60, 90, or 120 minutes)

18. REV h Button [page 20]

Press to view the DVD picture in fast reverse

motion. Press PAUSE, then press this button to begin

slow motion playback. Press this button repeatedly

to change the reverse speed of slow motion.

FWD g Button [page 20]

Press to fast forward the Disc. Press PAUSE, then

press this button to begin slow motion playback.

Press this button repeatedly to change the forward

speed of slow motion.

19. ZOOM Button [page 20]

Expands the picture to fill the entire screen.

20. SETUP Button [pages 14, 26-28]

Press to enter or exit the TV menu or DVD setup

mode.

21. TITLE Button [page 19]

Displays the title menu.

22. CLEAR Button [pages 21-23]

Resets a setting.

23. DISPLAY Button

TV Mode:

Press to display the channel number on the

screen. If you press it again, the channel number

will disappear.

DVD Mode: [page 25]

Displays the current status on the TV screen for

checking purposes.

24. SEARCH MODE Button [page 21]

Press to locate a desired point.

25. AUDIO Button [page 24]

Press to select a desired audio language or sound

mode.

26. SUBTITLE Button [page 24]

Press to select a desired subtitle language.

27. REPEAT Button [page 22]

Repeats playback of the current disc, title, chapter

or track.

28. ANGLE Button [page 24]

Press to change the camera angle to see the

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the

cover on the remote unit in the direction of the arrow.

2)Insert 2 “AA” penlight batteries into the battery

compartment in the direction indicated by the

polarity (+/-) markings.

3)Replace the cover.

NOTES

¡Do not mix alkaline and manganese batteries.

¡Do not mix old and new batteries.

TD005.QX33 04.7.30 1:34 PM Page 9

NOTE:

Before plugging the an antenna into the ANT. IN jack of the TV/DVD, check that

the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin

into the ANT. IN jack of the TV/DVD.

–

0C28

–

PREPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

The Indoor Antenna (supplied) is detachable. Insert the stem of the antenna into the

hole on the upper-back portion of the TV/DVD. Connect the Indoor Antenna to the

TV/DVD as shown in the diagram. For the best reception, fully extend the Indoor

Antenna and make the necessary adjustments. (Avoid touching the top section when

adjusting.)

NOTE:

The connection of an Indoor antenna may not always give acceptable TV reception.

CABLE WITH CONVERTER/DESCRAM-

BLER BOX OR SATELLITE BOX

If your cable service supplies you with a converter

box or if you use a satellite system, you can use the

basic connection shown here.

Channel selection must be made with the converter

box or satellite box. This means that channels cannot

be changed using the TV/ DVD Remote Control.

TO VIEW A SCRAMBLED/UNSCRAMBLED

CHANNEL

1.Set the TV/DVD channel selector to the output

channel of the Cable Converter Box or Satellite

Box. (Ex. CH3)

2.Select the channel to view at your Cable Converter

Box or Satellite Box.

Bent pin

Cable

Plug

(Needs to be straightened)

(Straight pin)

AUDIO OUT

DC 13.2V

COAXIAL

ANT.

OUT

VHF/UHF Antenna

(Not supplied)

VHF/UHF

Combiner

(Not supplied)

Flat twin-lead cable

UHF Antenna

(Not supplied)

VHF Antenna

(Not supplied)

From

Cable System

75-ohm Coaxial

Cable (Not supplied)

Satellite Box or

Cable Box

(Not supplied)

From Cable System or

Satellite Dish

[Fig. 4]

VHF/UHF COMBINED ANTENNA

A VHF UHF 75 ohm combination antenna can be

connected to ANT terminal.

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor

antenna.

CABLE WITHOUT CONVERTER/

DESCRAMBLER BOX

Use this connection if your cable system connects

directly to your TV/DVD without a converter box.

Use the TV/ DVD Remote Control to select channels.

INDOOR ANTENNA

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding

system of the building as close to the point of cable entry as practical.

[Fig. 5]

Indoor Antenna

(Supplied)

Flat twin-lead cable

AUDIO OUT

DC 13.2V

COAXIAL

ANT.

Matching

Adapter

(Supplied)

TD005.QX33 04.7.30 1:34 PM Page 10

–

0C28

–

CONNECTING TO EXTERNAL INPUT JACKS

When you watch a program recorded on an another

source (VCR or video camera), use the audio/video

input jacks on the front of the TV/DVD.

Connect the audio/video output

jacks of another source to the

AUDIO L/R and VIDEO jacks of

this TV/DVD. Then press SELECT

until "AUX" appears on the screen.

NOTE:

•

When you connect a monaural VCR (another

source) to this TV/DVD, connect the Audio output

jack of the monaural VCR (another source) to the

AUDIO L jack of this TV/DVD. The audio will

output in both L and R channel equally.

AUX

POWER

AUDIO

VIDEO

AUDIO

[Another source]

To the audio

output jacks

Audio/Video

cables

(not supplied)

etc.

To the video

output jack

[Front of the TV/DVD]

[Fig. 6]

CONNECTING TO A STEREO SYSTEM

AUDIO OUT

DC 13.2V

COAXIAL

ANT.

AUDIO OUT

COAXIAL

To Right (red) and Left (white)

AUDIO OUT jacks

Stereo system

To ANALOG AUDIO INPUT jacks

NOTES:

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the

TV/DVD.

•

The monaural sound is output from the stereo system when the TV/DVD is in the TV mode.

[Fig. 7]

TD005.QX33 04.7.30 1:34 PM Page 11

–

0C28

–

CONNECTING TO A RECEIVER WITH DOLBY DIGITAL DECODER

(for DVD)

If using this TV/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD out-

puts a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up to

a receiver with Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful

and high-quality surround sound as enjoyed in movie theaters.

Use audio coaxial digital cables available at retail for the audio connections.

NOTES:

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•

If connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the

setup mode. (See page 27 to set DOLBY DIGITAL to ON.)

•

Unless connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output

in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also

damage the speakers.

AUDIO OUT

DC 13.2V

COAXIAL

ANT.

AUDIO OUT

COAXIAL

Front speaker

(left)

Center

speaker

Front speaker

(right)

Surround

speaker

(left)

Surround

speaker

(right)

Subwoofer

To DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL jack

To COAXIAL DIGITAL

AUDIO INPUT jack

Receiver with

Dolby Digital decoder

[Fig. 9]

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are

trademarks of Dolby Laboratories.

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL

INPUT JACKS, MD DECK OR DAT DECK (for DVD only)

Use an audio coaxial digital cable available at retail for the audio connections.

NOTES:

•

The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital

sound by an MD or DAT deck.

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•

Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect set-

tings may generate noise distortion, and may also damage the speakers. (See page 27 to set DOLBY

DIGITAL to OFF.)

AUDIO OUT

DC 13.2V

COAXIAL

ANT.

AUDIO OUT

COAXIAL

Amplifier equipped with digital

input jacks, MD deck,

DAT deck, etc.

To COAXIAL DIGITAL

AUDIO INPUT jack

To DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL jack

(only DVD AUDIO OUT)

[Fig. 8]

TD005.QX33 04.7.30 1:34 PM Page 12

–

0C28

–

NOTES:

•

Be sure your vehicle has a 13.2-volt (12-volt), neg-

ative-ground electrical system.

•

Be sure you use only the supplied car battery cord.

Using another cord could damage the TV/DVD.

•

Be sure the socket is free of ashes and other debris.

•

Be sure to push the car battery cord’s plug com-

pletely into the cigarette-lighter socket.

•

Turn off the power to the cigarette-lighter socket

before you remove the car battery cord.

•

You must disconnect the car battery cord from the

TV/DVD before you can use the AC power.

•

Be sure to replace the fuse with only the same type,

6A, 250V.

•

Be sure the AC cord is wound as shown below.

WARNING: The driver should never watch

the TV/DVD while operating a motor vehicle.

DANGER:

•

Do not use this TV/DVD while driving.

•

Do not leave this TV/DVD in a car.

•

In the event the TV/DVD is used in a moving

vehicle, it is the responsibly of the owner to

insure the unit is securely fashioned, or per-

manently mounted inside the vehicle to pre-

vent the TV/DVD unit from becoming air-

borne and causing injury to people within

the vehicle in the event of an accident.

•

If you use the TV/DVD with the vehicle’s

engine off, recharge the vehicle’s battery

after about every 4 hours of use to prevent

it from running down. After you finish using

the TV/DVD be sure you unplug the car-bat-

tery cord from the cigarette-lighter socket.

•

This TV/DVD is not designed for use in a car.

We recommend you use this TV/DVD near by

your car.

•

Do not leave the TV/DVD under a burning

sun for a long time. The cabinet may get

deformed.

AUDIO OUT

DC 13.2V

COAXIAL

ANT.

DC13.2V

ANT.

VHF/UHF Combination

Mobile Antenna

(Not supplied)

To the vehicle's

cigarette-lighter socket

Car battery cord

(Supplied)

1) The supplied indoor antenna is adequate when

your vehicle is stationary. For best reception on

the road, use a high-quality VHF/UHF mobile TV

antenna.

2) Attach the car battery cord to the DC13.2V(12V)

connector on the back of the TV/DVD. Then, con-

nect the other end to your vehicle’s cigarette-

lighter socket.

MOBILE CONNECTION

AUDIO OUT

DC 13.2V

COAXIAL

ANT.

TD005.QX33 04.7.30 1:34 PM Page 13

–

0C28

–

You can program the tuner to scan all the channels you receive in your area.

NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just

select the TV/DVD channel selector to the output channel of the cable box or satellite box (Ex CH3). Then

select the channel to be viewed on the Cable Box or Satellite Box.

CHANNEL SET UP FOR THE

FIRST TIME

1 Plug in the TV/DVD power cord

Plug the TV/DVD power cord into a

standard AC outlet.

NOTE:

•

If some digits appear in the corner of

the screen, press POWER without

unplugging the power cord.

2 Turn on the TV/DVD

Press POWER to turn on the TV/DVD.

3 Select the On Screen

Language

Press K or L to point to “LAN-

GUAGE”.

Then, press ENTER to select

“ENGLISH” or “ESP”=Spanish or

“FRA” =French. “[ ]” indicate the selected language.

4 Begin auto preset

Press K or L to point to “AUTO

PRESET”. Then, press ENTER.

The tuner scans and memorizes all

active channels in your area.

NOTES:

•

The TV/DVD distinguishes between standard TV

channels and cable(CATV) channels.

•

The TV/DVD may memorize TV channels as

CATV channels if reception conditions is poor. If

this happens, try AUTO PRESET action again

when reception conditions are better. See “CHAN-

NEL SET UP AGAIN” on page 15.

5 After scanning

The tuner stops on the lowest memorized channel.

If you want to recall the selected channels, you can

select the desired channel directly with Number or

CHANNEL(CH.) K or L.

DELETING (OR ADDING)

CHANNEL

The channels you no longer receive or seldom watch

can be deleted from the memory. (Of course, you can

add the deleted channel into the memory again.)

1 Select “CHANNEL SET UP”

Press SETUP on the remote control.

Press K or L to point to “CHAN-

NEL SET UP”.

Then, press ENTER.

2 Select “ADD/DELETE CH”

Press K or L to point to

“ADD/DELETE CH”.

Then, press ENTER.

3 Enter the desired channel number

Press K or L until your desired

channel number appears. (You can

also use Number or CH. K/L to

enter it.) (Example: CH8)

4 Delete (or add) it from (into) memory

Press ENTER. The channel number changes to light

red. The channel is deleted from memory.

•

To delete another channel, repeat steps [3] and [4].

•

If you press ENTER again, the channel is memo-

rized again.

5 Exit the channel setup mode

Press SETUP on the remote control to returns to TV

mode.

NOTE: To confirm that channel(s) has been deleted

or added, press CHANNEL(CH.) K or L.

Added channel: Light blue.

Deleted channel: Light red.

– SET UP –

B LANGUAGE

[ENGLISH] ESP FRA

AUTO PRESET

– SET UP –

LANGUAGE

[ENGLISH] ESP FRA

B AUTO PRESET

- TV SETUP -

B CHANNEL SET UP

LANGUAGE [ENGLISH]

– CHANNEL SET UP –

B ADD / DELETE CH (TV)

AUTO PRESET

ADD / DELETE

SET UP FOR USE

TV SECTION

TD005.QX33 04.7.30 1:34 PM Page 14

–

0C28

–

CHANNEL SET UP AGAIN

1 Select “CHANNEL SET UP”

Press SETUP on the remote control.

Press K or L to point to “CHAN-

NEL SET UP”.

Then, press ENTER.

2 Begin auto preset

Press K or L to point to “AUTO

PRESET”. Then, press ENTER.

The tuner scans and memorizes all

the active channels in your area.

NOTES:

•

The TV/DVD distinguishes between standard TV

channels and cable(CATV) channels.

•

The TV/DVD may memorize TV channels as

CATV channels if reception conditions is poor. If

this happens, try AUTO PRESET action again

when reception conditions are better.

3 After scanning

The tuner stops on the lowest memorized channel.

SELECTING THE LANGUAGE

NOTE: This function effects only the language on

the screen menu and not the audio source.

1 Select “LANGUAGE”

Press SETUP on the remote control.

Press K or L to point to “LAN-

GUAGE”.

Then, press ENTER to select

“ENGLISH” or “ESPAÑOL”=

Spanish or “FRANÇAIS”= French.

2 Exit the Language mode

Press SETUP on the remote control to return to TV

mode.

NOTE: If Spanish or French is selected accidentally,

1)Press SETUP on the remote control.

2)Press K or L to point to “IDIOMA [ESPAÑOL]”

or “LANGAGE” [FRANÇAIS].

3)Press ENTER to select your desired language.

4)Press SETUP to exit.

- TV SETUP -

B CHANNEL SET UP

LANGUAGE [ENGLISH]

– CHANNEL SET UP –

ADD / DELETE CH (TV)

B AUTO PRESET

- TV SETUP -

CHANNEL SET UP

B LANGUAGE [ENGLISH]

TD005.QX33 04.7.30 1:34 PM Page 15

–

0C28

–

DEGAUSSING

Magnetism from nearby appliances and speakers

might affect the color of the TV picture.

If this happens, move this unit away from the appli-

ance. If the color is still not correct, disconnect power

cord from AC outlet then reconnect it after 30 minutes.

WATCHING A TV PROGRAM

1 Turn on the TV/DVD

Press POWER to turn on the TV/DVD.

2 Select the channel number

Press CHANNEL(CH.) K or L to select your desired

channel number or press Number on the remote con-

trol.

Note for using the Number on the remote control:

¡When selecting cable channels which are higher

than 99, press +100 first, then, press the last two

digits. (Example: to select channel 125, first press

“+100” then press “2” and “5”).

¡You must precede single-digit channel numbers

with a zero (For example: 02, 03, 04 and so on).

Remember:

¡If the TV/DVD is connected to a cable box or

satellite box, the TV/DVD must be on CH3 or

CH4, then the channel to be viewed must be select-

ed on the cable box or satellite box.

3 Adjust sound

Press VOLUME(VOL.)

adjust the volume.

NOTE:

•

If you press the CHANNEL(CH.) o or p in the

DVD mode, you can change the TV channels.

Even if you turn off the TV/DVD in the DVD

mode, when you turn it on again, it will go into the

TV mode.

BRIGHT to decrease to increase

brightness brightness

CONTRAST to decrease to increase

contrast contrast

COLOR to pale to brilliant

TINT to purple to green

SHARPNESS to soft to clear

PICTURE CONTROL

The TV/DVD’s picture controls – BRIGHT, CON-

TRAST, COLOR, TINT and SHARPNESS – are

preset to factory specifications. Although they are

usually the best, you may need to make some further

adjustments for a natural looking image.

Make sure ...

•

TV/DVD power must be turned on.

1 Select “PICTURE CONTROL”

Press PICTURE on the remote control.

2 Select item you want to adjust

Press K or L until desired control is displayed.

BRIGHT

CONTRAST

COLOR

TINT

SHARPNESS

3 Adjust the picture control

Press B or s to adjust to your desired level within

5 seconds.

NOTE:

•

At step 3, the picture adjustment display will disap-

pear from the TV screen after about 5 seconds

unless you press any buttons, even though you may

not be finished. In this case, repeat from step [1].

•

If there is a power failure of any kind, the unit will

retain its memory for this feature.

VOLUME 20

C C C C C C C C C C C C C C C C

BRIGHT

–

PP PP PP PP PP PP PP CC PP PP PP PP PP PP PP

TV OPERATION

TD005.QX33 04.7.30 1:34 PM Page 16

–

0C28

–

he Sleep Timer function enables you to shut off the power

without pressing POWER after a desired time period.

1 Set “SLEEP TIMER”

Press SLEEP on the remote control.

You may change the sleep time

with pressing SLEEP on the remote

control repeatedly. The timer is set

up to 120 minutes, 30 minutes each

time SLEEP is pressed.

NOTES:

•

When you disconnect the unit from the AC outlet,

or if you have a power failure, the sleep time will

be lost.

•

To view the time left for sleep timer press SLEEP

once when SLEEP display disappears. After 10

seconds, display will disappear again.

To cancel the sleep timer:

Press SLEEP repeatedly until "SLEEP 0 MINUTE"

is displayed.

SLEEP 120 MINUTE

SLEEP TIMER

TD005.QX33 04.7.30 1:34 PM Page 17

–

0C28

–

DVD SECTION

ABOUT THE DISCS

The following discs can be played back on this TV/DVD.

DVD video

DVD-R/RW*

DVD+R/RW*

Audio CD

CD-R/RW*

MP3*

* Depending on the types or the writing method of the

medium some discs can not be played.

• Some DVD-R/RW, DVD+R/RW, or CD-R/RW discs

made on personal computers, or on DVD recorders may

not be played back properly due to the factors such as

scratches, dirt or special properties of the disc.

• Discs made on personal computers may not be played

back properly due to the different environment or the

settings of the application you use. We recommend

always to use the standardized, rightly formatted discs.

(Please contact the sales agency for more detail).

This player conforms to the NTSC color system. You can-

not play discs recorded in other color systems such as

PAL or SECAM.

¡Some discs include region codes as shown below.

¡The number inside the symbol refers to a region of the

world, and a disc encoded in a specific region format

can only be played back on TV/DVD with the same

region code.

The following discs cannot be played back on this

TV/DVD.

DVD with region codes other than 1 or ALL.

DVD-ROM

DVD-RAM (Never play back, otherwise malfunc-

tion may result.)

CD-ROM

VSD

CDV (Only plays back the audio part.)

CD-G (Only plays back the sound.)

CD-I (Never play back, otherwise malfunction

may result.)

SACD

Photo CD (Never play back, otherwise malfunc-

tion may result.)

Video CD (Never play back, otherwise malfunc-

tion may result.)

Any other discs without compatibility indications.

PLAYABLE DISCS

[

DVD

]

Data on a DVD is divided into sections called "titles", and

then into subsections called "chapters", each of which is

given a title or chapter number. Playback conditions are

preset on some DVD video discs, and these playback con-

ditions take priority over user operations on this player. If

a function you selected does not run as desired, refer to

the manual accompanying the disc.

DISC TYPES

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1 Chapter 2Chapter 3 Chapter 4

[

AUDIO CD

]

Data on an audio CD is divided into sections called

“tracks”, each of which is given a track number.

Example

Track 1 Track 2 Track 3 Track 4 Track 5 Track 6

[

MP3

]

Data on an MP3 is divided into sections called "groups",

and then into subsections called "tracks", each of which is

given a group or track number.

Example

Group 1 Group 2

Track 1 Track 2 Track 1 Track 2Track 3 Track 4

TD005.QX33 04.7.30 1:34 PM Page 18

–

0C28

–

––

–

BASIC PLAYBACK

Getting started

¡Turn on the power of amplifier and any other com-

ponents, if necessary.

1 Press POWER.

The power will turn on.

2 Press OPEN/CLOSE to open disc loading

tray.

3 Place the chosen disc in the tray, with the

label facing up.

DVD-V

PLAYING A DISC

4 Press PLAY.

The tray will close automatically, and playback will

then start from the first chapter or track of the disc.

If the playback does not start automatically, press

PLAY.

¡When you playback the DVD which a title menu is

recorded, it may appear on the screen. In this case,

refer to “TITLE MENU”.

5 Press STOP to stop playback.

NOTES

¡When the DVD mode has been switched to the TV

mode, the DVD mode shuts down first and then TV

picture and sound appears in about 4 seconds.

Similarly, when POWER is pressed to turn off in the

DVD mode, this mode shuts down first and then the

TV/DVD’s power is turned off.

¡A “prohibited icon” may appear at

the top-right on the TV screen dur-

ing operation, warning that a pro-

hibited operation has been encoun-

tered by the DVD or the disc.

¡With DVDs that use titles for playback program sig-

nals, playback may start from the second title, or it

may skip these titles.

¡During the playback of a two layered disc, pictures

may stop for a moment. This happens when the 1st

layer switches to the 2nd layer. This is not a mal-

function.

GENERAL FEATURES

DVD may contain menus to navigate the disc and

access special features. Press appropriate numerical

key or use Arrow (L/K/B/s) to highlight your selec-

tion in the DVD main menu and press ENTER to con-

firm.

NOTES

¡Select DVD mode by pressing SELECT on the

remote control. Then, press PLAY or OPEN/CLOSE

before you operate the DVD functions.

¡Unless stated, all operations described are based on

remote control use. Some operations can be carried

out using the menu bar on the TV screen.

TITLE MENU

1 Press TITLE.

The title menu will appear.

2 If the feature is not available, symbol

may appear on the TV screen.

3 Press Arrow (L/K/B/s) to select an item,

and ENTER to confirm selection.

DVD-V

DISC MENU

1 Press DISC MENU.

The DVD main menu will appear.

2 If the feature is not available, symbol

may appear on the TV screen.

3 If disc menu is available on the disc, audio

language, subtitle options, chapters for the

title and other options will appear for selec-

tion.

4 Press Arrow (L/K/B/s) to select an item,

and ENTER to confirm selection.

DVD-V

CALLING UP A MENU SCREEN

DURING PLAYBACK

For DVD-Vs

¡Press DISC MENU to call up the DVD menu.

¡Press TITLE to call up the title menu.

NOTE

¡Contents of menus and corresponding menu opera-

tions may vary between discs. Refer to the manual

accompanying the disc for details.

TD005.QX33 04.7.30 1:34 PM Page 19

–

0C28

–

––

–

STEP BY STEP PLAYBACK

1 During playback, press PAUSE.

Playback will pause and sound will be muted.

2 The disc goes forward by one frame each

time PAUSE is pressed.

3 To exit step by step playback, press PLAY.

DVD-V

RESUME

1 During playback, press STOP.

Resume message will appear on the TV screen.

2 Press PLAY, playback will resume from the

point at which playback was stopped.

To cancel resume, press STOP twice.

¡If turn off the TV/DVD, resume function will be

cancelled.

DVD-V

1 During playback, press FWD g or REV h

repeatedly to select the required forward or

reverse speed: x2, x8, x50, x100.

For audio CDs, the speed is fixed at ×16.

¡For MP3, the speed is fixed at ×8.

2 To return to normal playback, press PLAY.

Note for using buttons on the main unit:

During playback, press and hold down the SKIP G /

SEARCHg or SKIPH /SEARCHh on the

TV/DVD for a few seconds to begin Search in x2

speed. Press and hold down again to change speed to

x8. Repeat this procedure to change to x50 and x100.

MP3CD

DVD-V

FAST FORWARD/REVERSE

SLOW FORWARD /

SLOW REVERSE

1 During playback, press PAUSE.

2 Press FWD g or REV h.

3 Press FWD g or REV h repeatedly to

select the required speed: 1/16, 1/8, 1/2 of

the normal playback.

4 To return to normal playback, press PLAY.

Note for using buttons on the main unit:

Press PAUSE, then, press and hold down the SKIP G /

SEARCHg or SKIPH /SEARCHh on the

TV/DVD for a few seconds to begin Search in 1/16

speed of the normal playback. Press and hold down

again to change speed to 1/8. Repeat this procedure to

change to 1/2.

DVD-V

ZOOM

The Zoom function allows you to enlarge the video

image and to pan through the enlarged image.

1 Press ZOOM during playback.

Playback will continue.

2 Press ZOOM repeatedly to select the

required zoom factor: ZOOM1, ZOOM2,

ZOOM3, or OFF.

3 Use the Arrow (K/L/s / B) to move the

zoomed picture across the screen.

4 To exit zoom mode, press ZOOM to OFF.

NOTES

¡Zooming function does not work while disc menu is

shown.

¡Zooming function is not available on some discs.

DVD-V

PAUSE

1 During playback, press PAUSE.

Playback will pause and sound will be muted.

2 To continue playback, press PLAY.

DVD-V

TD005.QX33 04.7.30 1:34 PM Page 20

–

0C28

–

––

–

TRACK SEARCH

There are three ways to begin playback on an Audio

CD at a specific Track.

Using Number on the remote control

1 Press Number to enter the desired Track

number.

Playback will start at the selected track.

¡For single digit tracks (1-9), press a single number

(eg. track 3, press 3).

¡To play track 26, press +10, 2, 6.

Using SEARCH MODE

1 Press SEARCH MODE.

The track search display appears.

2 Within 30 seconds, select a desired track

number using Number on the remote control.

For single digits press 0 first.

¡Playback will start at the selected track.

Using SKIP

During playback, press SKIP G to move the next

track. Press it repeatedly to skip subsequent tracks.

Press SKIP H to go back to beginning of the current

track. Press it repeatedly to go to the previous tracks.

¡If SKIP is pressed while the playback is paused, the

playback will be paused again after skipping to the

next track.

NOTE

¡SKIP HG are not available when playback is

stopped.

TITLE / CHAPTER SEARCH

1 Press SEARCH MODE once for the Chapter

search, twice for the Title search during

playback.

2 Enter the desired chapter/title number using

Number on the remote control.

Playback will start at the selected Chapter or Track.

¡Press CLEAR to erase the incorrect input.

¡For single digits press 0 first.

DVD-V

TIME SEARCH

1 During playback, press SEARCH MODE

three times (CD: twice) to display the Time

Search on the TV screen.

2 Within 30 seconds, enter a desired disc

time using Number on the remote control.

Playback will start at the specified time.

¡Press CLEAR to erase the incorrect input.

DVD-V

SEARCH FUNCTION

MARKER SETUP SCREEN

Use markers to memorise your favorite places on a

disc.

1 Press SEARCH MODE four times (CD: three

times) during playback.

The display screen and Markers will appear on the

TV screen.

2 Press Arrow (s/ B) to select 1, 2, 3, 4, 5, 6,

7, 8, 9, or 10 and ensure that “- : - - : - -”

appears in the display.

3 When reaches the desired point, press

ENTER.

The Title or Track and elapsed playing time will

appear in the TV screen.

4 To return to the Marker later, press SEARCH

MODE four times (CD: three times) during

playback and Arrow (s/ B) to choose the

desired marker, then press ENTER.

NOTES

¡Opening the disc tray or turning off the power or

select AC at step 2 and press ENTER will erase all

Markers.

¡To clear a marker, using Arrow (s / B

)

, position the

cursor on to the marker number to be cleared and

press CLEAR.

¡You can mark up to 10 points.

5 Press SEARCH MODE or RETURN to exit.

DVD-V

TD005.QX33 04.7.30 1:34 PM Page 21

–

0C28

–

––

–

REPEAT

REPEAT TITLE / CHAPTER

To activate the repeat function, press REPEAT

during playback.

The repeat mode changes as described below every

time you press the button.

DVD-V

REPEAT is available only during playback.

CHAPTER TITLE OFF

(current chapter repeat) (current title repeat)

(repeat off)

NOTES

¡Repeat Title/Chapter is not available with some

scenes.

¡The REPEAT setting will be cleared when moving

to other title or chapter.

REPEAT TRACK

To activate the repeat function, press REPEAT

during playback.

The repeat mode changes as described below every

time you press the button.

TRACK ALL OFF

(current track repeat) (entire disc repeat)

(repeat off)

NOTES

¡Repeat setting will be cleared when moving to other

track.

¡Repeat playback does not function during repeat A-

B playback.

REPEAT A-B

1 Press REPEAT A-B at your chosen starting

point.

A- appears briefly on the TV screen.

2 Press REPEAT A-B again at your chosen

end point.

A-B appears briefly on the TV screen, and the

repeat sequence begins.

3 To exit the sequence, press REPEAT A-B.

NOTES

¡The repeat A-B section can only be set within the cur-

rent title (for DVDs), or current track (for audio CDs).

¡Repeat A-B is not available with some scenes in DVD.

¡To cancel the A point which was set, press CLEAR.

¡Repeat A-B playback does not function during title,

chapter, track or all repeat playback.

DVD-V

PROGRAM

You may determine the order in which tracks will play.

1 In stop mode, press MODE.

The PROGRAM screen will appear.

2 Press ▲ or ▼ to select a track, then press

ENTER.

Press CLEAR to erase the

most recently entered pro-

gram.

3 Repeat step 2 until you have selected all the

tracks you want to play in the program.

4 Press PLAY to play the programmed tracks.

NOTES

¡While the program is being played back, the STOP

works as follows.

¡Press STOP once and then PLAY again, playback

will restart from the point where STOP was pressed.

(Program continued)

¡Press STOP twice and then PLAY again, playback will

restart from the track in the usual way. (Program cleared)

¡Up to 99 programs can be entered.

¡If you like to repeat the current track in the program,

press REPEAT repeatedly until TRACK appears

during playback. If you like to repeat the entire pro-

gram press REPEAT repeatedly until ALL

appears during playback.

TOTAL

RANDOM PLAYBACK

This shuffles the playing order of tracks instead of

playback in the sequence.

1 In stop mode, press MODE twice.

RANDOM screen appears.

2 Press PLAY to start random playback.

NOTE

¡If you like to repeat the current track in the random

selection, press REPEAT repeatedly until

TRACK appears during playback. If you like to

repeat the entire random selection press REPEAT

repeatedly until ALL appears during playback.

PLAY

CD [AUDIO] TOTAL 0:45:55

RANDOM PROGRAM

- - no indication - -

RANDOM

SPECIAL PLAYBACK FUNCTION

TD005.QX33 04.7.30 1:34 PM Page 22

–

0C28

–

––

–

When a CD with MP3 files is in the TV/DVD, the

MP3 menu will appear on the TV screen in stop mode.

1 In stop mode, press Arrow (K/L) to select

the desired group track.

If a group is selected, press

or ENTER to go on to the

track selection screen. Press

Arrow (K /L ) to choose a

track, then press ENTER.

¡If a track is selected, press

ENTER to start playing

tracks. Starting from the one you’ve just chosen the

subsequent tracks will be played.

¡Choose FIRST PLAY to start playback from the

beginning of the listed tracks.

¡Press TITLE to return to the first item.

2 Press STOP to stop playback.

NOTES

¡Folders are known as Groups; files are known as

Tracks.

¡MP3 files are accompanied by icon.

¡Maximum of 255 folders can be recognized.

¡Maximum of 256 files can be recognized.

¡Up to 8 hierarchies can be created.

This player recommends the use of files recorded at

the below specifications:

¡Sampling frequency: 44.1kHz or 48kHz

¡Constant bit rate: 112kbps ~ 320kbps.

MP3

MP3 PLAYBACK

1 Press SEARCH MODE during playback.

The FILE LIST will appear.

2 Select a desired track using Arrow

(

K/L/s/B).

Press B when you want to go to the next hierarchy.

¡Press s when you want to go back to the previous

hierarchy.

3 Press PLAY to start playback.

NOTES

¡Press SEARCH MODE to exit.

¡Some selections may take a while to be recognized.

MP3

TRACK SELECTION

PLAYING A MP3 DISC

RANDOM PLAYBACK

1 In stop mode, press MODE twice.

RANDOM screen appears.

2 Press PLAY to start random playback.

MP3

This feature allows you to program an MP3 disc to

play in a desired sequence.

1 In stop mode, press MODE.

The PROGRAM screen will appear.

2 Select a desired track using Arrow

(

K/L/s/B). Then, press ENTER.

Press B when you want to go to the next hierarchy.

¡Press s when you want to go back to the previous

hierarchy.

¡Press CLEAR to erase the most recently entered pro-

gram.

3 Repeat step 2 until you have selected all the

Tracks you want to play in the program.

4 Press PLAY to start programmed playback.

MP3

PROGRAM

TD005.QX33 04.7.30 1:34 PM Page 23

–

0C28

–

––

–

AUDIO LANGUAGE

The TV/DVD allows you to select a language during

DVD disc (if multi language available) playback.

1 Press AUDIO during playback.

2 Press AUDIO repeatedly to select your

desired language.

NOTE

¡Pressing AUDIO may not work on some DVDs with

multiple audio languages (e.g. DVDs which allow

audio language setting on the disc menu).

DVD-V

STEREO SOUND MODE

1 Press AUDIO repeatedly during playback to

select between STEREO, L-CH or R-CH.

STEREO - both right and left channels are active

(stereo)

L-CH - only left channel is active

R-CH - only right channel is active

NOTE

¡If the Virtual Surround setting is ON, the sound

mode will be fixed to STEREO, and can not be

changed.

The DVD allows you to select a language for subtitles

during DVD disc (if available) playback.

1 Press SUBTITLE during playback.

2 Press SUBTITLE repeatedly to select your

desired subtitle language.

The subtitle language will be displayed on the dis-

play bar at the top of the screen.

3 To turn off subtitles, press SUBTITLE

repeatedly until OFF appears.

NOTES

Some discs allow audio language setting/subtitle language

setting on the disc menu. (Operation varies between discs,

so refer to the manual accompanying the disc.)

¡If the desired language is not shown after pressing

SUBTITLE several times, the disc does not have

subtitles in that language.

¡If you choose a Language that has a 3 letter language

code, the code will be displayed every time you

change the Subtitle language setting. If you choose

any other languages, ‘---’ will be displayed instead.

(Refer to page 26.)

DVD-V

SUBTITLE LANGUAGE CAMERA ANGLE

Some DVD discs contain scenes which have been shot

simultaneously from various angles. You can change

the camera angle when the ( ) icon appears on the

screen.

1 Press ANGLE during playback.

The selected angle will be displayed on the display

bar at the top of the screen.

2 Press ANGLE repeatedly to select your

desired angle.

DVD-V

CHANGING THE SETTINGS

Adjust the Black Level Settings to make the black

parts of the picture brighter.

1 Press MODE during playback.

2 Press ENTER to switch ON/OFF.

ON: Makes the dark parts brighter.

OFF: Shows the original picture as recorded.

3 Press MODE twice or RETURN to exit.

DVD-V

BLACK LEVEL SETTING

You can enjoy stereophonic visual space on your exist-

ing stereo system.

¡Make sure you are using the AUDIO L/R analog out

jack on the rear panel of the TV/DVD before you use

this feature.

1 Press MODE twice (CD/MP3: once) during

playback.

2 Press ENTER to set it 1 (Natural effect) or 2

(Emphasized effect) or OFF.

3 Press MODE or RETURN to exit.

NOTE (for CD play only)

¡Virtual Surround will not be effective if the sound

mode is set to something other than STEREO.

MP3CD

DVD-V

VIRTUAL SURROUND

OFF

TD005.QX33 04.7.30 1:34 PM Page 24

–

0C28

–

––

–

For DVD-Vs

1 Press DISPLAY during playback to show

current Chapter.

The elapsed and remaining

playing time of the current

chapter will be displayed.

2 Press DISPLAY again to show current Title.

The elapsed and remaining playing time of the cur-

rent title will be displayed.

3 Press DISPLAY again.

The BIT RATE and the current repeat setting will be

displayed.

¡If you are playing a dual layered disc, the layer num-

ber will also be displayed (L0: Layer 0 is playing.

L1: Layer 1 is playing).

4 Press DISPLAY again to exit the display.

THE ON-SCREEN INFORMATION

For audio CDs

1 Press DISPLAY during playback to show

the current Track.

The elapsed and remaining playing time of the cur-

rent track will be displayed.

2 Press DISPLAY again to show current Total

Track.

The elapsed and remaining playing time of the cur-

rent total track will be displayed.

3 Press DISPLAY again to exit the display.

You can check the information about the current disc by pressing DISPLAY on the remote control.

MP3CD

DVD-V

9/49 0:00:00 -0:00:00

For MP3

1 Press DISPLAY during playback.

The name of the file currently in play will be dis-

played.

2 Press DISPLAY again to show the track

number, the repeat status, and the playback

status at the top of the screen.

will be displayed when repeat play has been

selected.

T- indicates Track repeat

G - indicates Group (folder) repeat

A- indicates Disc repeat

3 Press DISPLAY again to exit the display.

TD005.QX33 04.7.30 1:34 PM Page 25

–

0C28

–

––

–

CHANGING THE DVD SETUP ITEMS

Language options are not available with some discs.

1 Press SETUP twice in STOP mode so that

the DVD SETUP menu appears.

If the menu does not appear, press PLAY, STOP,

then SETUP twice.

2 Press B to select CUSTOM, then press

ENTER.

CUSTOM mode will appear.

3 Press Arrow (s/ B) to select LANGUAGE,

then press ENTER to confirm.

4 Press Arrow (K/L) to select the next items,

then press ENTER.

AUDIO:

¡Sets the audio language.

SUBTITLE:

¡Sets the subtitle language.

DISC MENU:

¡Sets the language for DVD menu.

5 Press Arrow (K/L) to select a setting, then

press ENTER.

If OTHER is selected on the AUDIO, SUBTITLE or

DISC MENU screen, press four-digit number to

enter the code for the desired language. (Refer to the

language code list below.)

¡Only the languages supported by the disc can be

selected.

6 Press SETUP to exit.

NOTE

¡Language Setting for Audio and Subtitle is not avail-

able with some discs. Then use the AUDIO and the

SUBTITLE button. Details are on page 24.

TO CHANGE THE ON-SCREEN MENUS

You can access the TV SETUP menu by pressing

SETUP from the DVD mode. Refer to “Selecting the

Language” on page 15 to changing the on-screen

menus.

¡In case of selecting from the DVD mode, you cannot

select “CHANNEL SET UP” menu.

DVD-V

LANGUAGE SETTING

LANGUAGE

AUDIO ORIGINAL

SUBTITLE OFF

DISC MENU ENGLISH

If you choose a Language that has a 3 letter language

code, the code will be displayed every time you change

the Audio or Subtitle language setting on page 24. If

you choose any other languages, ‘---’ will be displayed

instead. (3 letter language code is written in bracket.)

Language Code

A-B

Abkhazian 4748

Afar 4747

Afrikaans 4752

Albanian 6563

Amharic 4759

Arabic 4764

Armenian 5471

Assamese 4765

Aymara 4771

Azerbaijani 4772

Bashkir 4847

Basque 5167

Bengali;Bangla 4860

Bhutani 5072

Bihari 4854

Bislama 4855

Breton 4864

Bulgarian 4853

Burmese 5971

Byelorussian 4851

C-E

Cambodian 5759

Catalan 4947

Chinese [CHI] 7254

Corsican 4961

Croatian 5464

Czech 4965

Danish [DAN] 5047

Dutch [DUT] 6058

English [ENG] 5160

Esperanto 5161

Estonian 5166

F-H

Faroese 5261

Fiji 5256

Finnish [FIN] 5255

French [FRE] 5264

Frisian 5271

Galician 5358

Georgian 5747

German [GER] 5051

Greek [GRE] 5158

Greenlandic 5758

Guarani 5360

Gujarati 5367

Hausa 5447

Hebrew 5569

Hindi 5455

Hungarian [HUN] 5467

I-K

Icelandic [ICE] 5565

Indonesian 5560

Interlingua 5547

Interlingue 5551

Inupiak 5557

Irish [IRI] 5347

Italian [ITA] 5566

Japanese [JPN] 5647

Javanese 5669

Kannada 5760

Kashmiri 5765

Kazakh 5757

Kinyarwanda 6469

Kirghiz 5771

Kirundi 6460

Korean [KOR] 5761

Kurdish 5767

Language Code

L-N

Laothian 5861

Latin 5847

Latvian;Lettish 5868

Lingala 5860

Lithuanian 5866

Macedonian 5957

Malagasy 5953

Malay 5965

Malayalam 5958

Maltese 5966

Maori 5955

Marathi 5964

Moldavian 5961

Mongolian 5960

Nauru 6047

Nepali 6051

Norwegian [NOR] 6061

O-R

Occitan 6149

Oriya 6164

Oromo(Afan) 6159

Panjabi 6247

Pashto;Pushto 6265

Persian 5247

Polish 6258

Portuguese [POR] 6266

Quechua 6367

Rhaeto-Romance 6459

Romanian [RUM] 6461

Russian [RUS] 6467

Samoan 6559

Sangho 6553

Sanskrit 6547

Scots Gaelic 5350

Serbian 6564

Serbo-Croatian 6554

Sesotho 6566

Setswana 6660

Shona 6560

Sindhi 6550

Singhalese 6555

Siswat 6565

Slovak 6557

Slovenian 6558

Somali 6561

Spanish [SPA] 5165

Sundanese 6567

Swahili 6569

Swedish [SWE] 6568

Tagalog 6658

Tajik 6653

Tamil 6647

Tatar 6666

Telugu 6651

Thai 6654

Tibetan 4861

Tigrinya 6655

Tonga 6661

Tsonga 6665

Tu rkish [TUR] 6664

Tu rkmen 6657

Tw i 6669

U-Z

Ukrainian 6757

Urdu 6764

Uzbek 6772

Vietnamese 6855

Volapuk 6861

Welsh 4971

Wolof 6961

Xhosa 7054

Yiddish 5655

Yo r uba 7161

Zulu 7267

QUICK SETUP

TV MODE

4:3 LETTER BOX

DOLBY DIGITAL ON

TD005.QX33 04.7.30 1:34 PM Page 26

–

0C28

–

––

–

AUDIO SETTINGS

Choose the appropriate Audio settings for your equip-

ment as it only affect during the playback of DVD

discs.

1 Press SETUP twice in STOP mode so that

the DVD SETUP menu appears.

If the menu does not appear, press PLAY, STOP,

then SETUP twice.

2 Press B to select CUSTOM, then press

ENTER.

CUSTOM mode will appear.

3 Press Arrow (s/ B) to select AUDIO, then

press ENTER to confirm.

4 Press Arrow (K/L) to select the below

items, then press ENTER.

DRC (Dynamic Range Control):

¡To compress the range of sound volume.

¡The default setting is OFF.

DOLBY DIGITAL:

Set to On when the unit is connected to a Dolby Digital

Decoder.

(ON: Output by Dolby Digital)

(OFF: Convert the Dolby Digital to PCM (2 channel

stereo))

¡The default setting is ON.

DOWN SAMPLING:

¡Set to ON when outputting in 48 kHz.

¡The default setting is ON.

When playing disc with copyright Protection

¡If you select OFF, copyright protection will be acti-

vated and sound will be down sampled at 48kHz.

5 Press SETUP to exit.

QUICK

AUDIO

DRC OFF

DOLBY DIGITAL ON

DOWN SAMPLING ON

You can change certain aspects of the DVD display

screens and on-screen messages on the TV screen.

1 Press SETUP twice in STOP mode so that

the DVD SETUP menu appears.

If the menu does not appear, press PLAY, STOP,

then SETUP twice.

2 Press B to select CUSTOM, then press

ENTER.

CUSTOM mode will appear.

3 Press Arrow (s/ B) to select DISPLAY, then

press ENTER to confirm.

4 Press Arrow (K/L) to select the below

items, then press ENTER.

TV MODE:

¡Press Arrow (K/L) for an item selection, then press

ENTER.

¡Select 4:3 LETTER BOX for a black bars appears

on top and bottom of the screen.

¡Select 4:3 PAN & SCAN for a full height picture

with both sides trimmed.

¡The default setting is 4:3 LETTER BOX.

ANGLE ICON:

¡Press ENTER repeatedly to turn Angle icon ON or

OFF.

¡The default setting is ON.

AUTO POWER OFF:

¡Press ENTER repeatedly to turn Auto Power off ON

or OFF.

¡The default setting is ON and it will turn the

TV/DVD to off automatically after 15 minutes of no

use.

5 Press SETUP to exit.

QUICK

DVD-V

DISPLAY SETTING

DISPLAY

TV MODE

4:3 LETTER BOX

ANGLE ICON ON

AUTO POWER OFF ON

QUICK SETUP

TV MODE

4:3 LETTER BOX

DOLBY DIGITAL ON

QUICK SETUP

TV MODE

4:3 LETTER BOX

DOLBY DIGITAL ON

TD005.QX33 04.7.30 1:34 PM Page 27

–

0C28

–

––

–

CONTROL LEVELS

ALL

All parental lock is cancelled.

Level 8

DVD software of any grade (adult/general/children)

can be played back.

Levels 7 to 2

Only DVD software intended for general use and

children can be played back.

Level 1

Only DVD software intended for children can be

played back, with those intended for adult and

general use prohibited.

PARENTAL CONTROL

Parental Control limits the disc viewing that exceed

your settings. (with a password or playback will stop.)

This feature allows you to prevent discs with alterna-

tive scenes from being played by your children.

DVD-V

PARENTAL LEVEL

Parental Level allows you to set the rating level of

your DVD discs. Playback will stop if the disc’s rat-

ings exceed the level you set.

1 Press SETUP twice in STOP mode so that

the QUICK SETUP menu appears.

If the menu does not appear, press PLAY, STOP,

then SETUP twice.

2 Press B to select CUSTOM, then press

ENTER.

3 Press Arrow (s/B) to select PARENTAL,

then press ENTER.

4 Enter your four-digit password then press

ENTER.

5 Press Arrow (K/L) to select PARENTAL

LEVEL, then press ENTER.

6 Press Arrow (K/L) to select the desired

level.

7 Press SETUP to exit

NOTES

¡When doing this for the first time, enter any 4 digits.

(except for 4737) That number will be used as the

password from the second time onward.

¡To change the password, press Arrow (K/L) to

select CHANGE at step 5, then press ENTER. Enter

the four-digit pass-word, then press ENTER.

¡With some DVDs, it may be difficult to find if they

are compatible with parental lock. Be sure to check

if the parental lock function operates in the way that

you have set.

¡Record the password in case you forget it.

PARENTAL

PARENTAL LEVEL ALL

IF YOU FORGET THE PASSWORD

1 Press 4, 7, 3, 7 at step 4. Then enter your

new password.

Password will be cleared and parental level will be

set to ALL.

2 Proceed the above Steps 5-7 again.

QUICK SETUP

TV MODE

4:3 LETTER BOX

DOLBY DIGITAL ON

TD005.QX33 04.7.30 1:34 PM Page 28

–

0C28

–

––

–

If the TV/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the

player, consulting the following checklist.

TROUBLESHOOTING GUIDE

Problem Corrective Action

No Picture or Sound

•

Try a new channel, if OK, then possible station trouble.

•

Make sure the power is turned on.

•

Press SELECT on the remote control to select TV mode. Then try

other TV feature.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

Bars On Screen

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

Picture Distorted or Blurred

•

Try a new channel, if OK, then possible station trouble.

•

If outside antenna is being used, check for broken wire.

Picture Rolls Vertically

•

Try a new channel, if OK, then possible station trouble.

Lines or Streaks in Picture

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

No Color

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Adjust COLOR control.

Poor Reception on Some Channels

•

Try a new channel, if OK, then possible station trouble.

Ghosts in Picture

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

Weak Picture

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Adjust CONTRAST & BRIGHT control.

Sound OK, Picture Poor

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

•

Adjust CONTRAST & BRIGHT control.

Picture OK, Sound Poor

•

Try a new channel, if OK, then possible station trouble.

•

Check for local interference.

Different color marks on screen.

•

Magnetism from nearby appliances and geomagnetism might affect

the color of the TV picture. Move the TV/DVD away from the appli-

ances, the TV/DVD can repair itself automatically. If you want to

repair immediately, unplug the TV/DVD power cord, then plug it in

again 30 minutes or so later.

Problem Corrective Action

No power.

•

Make sure the power plug is connected to an AC outlet.

•

Make sure the power is turned on.

The TV/DVD does not respond to

•

Check if the power plug is connected to an AC outlet.

the remote control.

•

Check the batteries in the remote control.

•

Aim the remote control directly at the remote sensor. If necessary,

remove all the obstacles between the sensor and the remote.

•

You have to be within 23 feet of the TV/DVD.

•

Check if the correct mode is selected. If not switch the mode by

pressing SELECT on the remote control,whichever you need.

TV Mode

TD005.QX33 04.7.30 1:34 PM Page 29

–

0C28

NOTES:

•

Some functions are not available in specific modes, but this is not a malfunction. Read the description in

this Owner’s Manual for details on correct operations.

•

Playback from a desired track and random playback are not available during program playback.

–

––

–

Problem Corrective Action

No picture. • Connect the video cables firmly.

• Insert a correct video disc that plays on this TV/DVD.

• Press SELECT on the remote control to select DVD mode. Next,

press PLAY or OPEN/CLOSE. Then, try other DVD feature.

Disc cannot be played

.• Insert the disc.

• Clean the disc.

• Place the disc correctly, with the label side up.

• Cancel the parental lock or change the control level.

No sound

.• Connect the audio cables firmly.

• Turn the power of the audio component on.

• Correct the audio output settings.

• Correct the input settings on the audio component.

No DTS audio is output

.• This TV/DVD does not support DTS audio. This is not a malfunction.

Distorted picture

.•

There are some cases where pictures may be slightly distorted, which are not a

sign of a malfunction.

• Although pictures may stop for a moment, this is not a malfunction.

Audio or subtitle language •

The selected language is not available for audio or subtitles on the DVD.

does not match the set up

This is not a malfunction

The camera angle cannot be changed •

The DVD does not

contain sequences recorded from different camera

angles.

This is not a malfunction

Audio or subtitle language cannot be • The DVD does not contain audio source or subtitles in the selected

changed language.

This is not a malfunction.

“Prohibited icon” appears on the • That operation is prohibited by the player or the disc.

screen, prohibiting an operation

This is not a malfunction.

CD sound dropout • Scratched disc. Replace the disc with unscratched one.

No CD reproduction

DVD picture dropout

DVD picture freeze

DVD picture in mosaic

No DVD reproduction

DVD Mode

TD005.QX33 04.7.30 1:34 PM Page 30

–

0C28

–

––

–

CABINET CLEANING

•

Wipe the front panel and other exterior surfaces of

the TV/DVD with a soft cloth immersed in luke-

warm water and wrung dry.

•

Never use a solvent or alcohol. Do not spray insec-

ticide liquid near the TV/DVD. Such chemicals

may cause damage and discoloration to the

exposed surfaces.

SERVICING

•

Should your TV/DVD become inoperative, do not

try to correct the problem by yourself. There are no

user-serviceable parts inside. Turn off, unplug the

power cord, and please call our help line at 1-800-

488-1222, to locate an Authorized Service Center.

IF THE LASER OPTICAL PICKUP UNIT IS DIRTY

•

If the player still does not perform properly when it is operated while referring to the relevant sections and to

"TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty. Consult

your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

•

Use discs which have the following logos on them.

(Optical audio digital discs.)

•

Handle the discs so that fingerprints and dust do

not adhere to the surfaces of the discs.

•

Always store the disc in its protective case when it

is not used.

DISC HANDLING

•

To clean-off, use a soft cloth.

•

Do not use a hard cloth since this will mar the disc.

•

Wipe the disc in a straight line from center to edge.

•

Never wipe with a circular motion.

•

Do not use detergent or abrasive cleaning agents.

MAINTENANCE

Recordable

ReWritableReWritable

TD005.QX33 04.7.30 1:34 PM Page 31

–

0C28

CRT : 9 inch in-line gun,

90˚ deflection tube

Television system: NTSC-M

TV Standard

Channel coverage:

VHF: 2 ~ 13

UHF: 14 ~ 69

CATV: 2 ~13, A ~ W,

W+1 ~ W+84,

A-5 ~ A-1, 5A

Tuning System: 181 channel

frequency synthesized

tuning system

Channel access: Direct access keyboard,

programmable

scan and up/down

Discs: DVD video, Audio CD

Output signal format: NTSC color

Frequency response

(output jack)

DVD (linear sound): 20 Hz to 22 kHz

(sample rate: 48 kHz)

20 Hz to 44 kHz

(sample rate: 96 kHz)

CD: 20 Hz to 20 kHz

Signal-to-noise ratio

(S/N ratio)(output jack)

CD: 100 dB (EIAJ)

Dynamic range

(output jack)

DVD (linear sound): 85 dB

CD: 84 dB (EIAJ)

Total distortion factor

CD: 0.07% (EIAJ)

Wow and flutter: Below the measurement

limitation (+/-0.001%

WPEAK) (EIAJ)

•

Designs and specifications are subject to change without notice.

•

If there is a discrepancy between languages, the default language will be English.

DVD

GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS

Sound output: 2 speakers, 1W, 8 ohm

OTHER SPECIFICATIONS

Terminals

Antenna input: VHF/UHF/CATV

75 ohm unbalanced (F-type)

Video input: RCA connector [ 1

Audio L/R input: RCA connector [ 2

Headphone: 1/8” stereo (3.5 mm)

Coaxial digital

audio output

(only DVD): One pin jack,

500m Vpp (75 ohm)

Analog audio L/R

output: RCA connector [ 2

Remote control: Digital encoded

infrared light system

Operating

temperature: 5°C to 40°C

(41°F~104°F)

Power requirement : AC 120V/60Hz

DC 13.2V

Power consumption : AC 55W / DC 60W

(Maximum)

Dimensions: H:12-1/4” (311mm)

W:10-7/8” (276mm)

D:12-1/2” (318mm)

Weight: 17.6 lbs (8.0 kg)

SPECIFICATIONS

TD005.QX33 04.7.30 1:34 PM Page 32

–

0C28

INDICE

■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 33

PANEL FRONTAL DEL TELEVISOR/DVD. . . . . . . . . . 33

MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 33

VISTA POTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 34

■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 34

CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 34

LA ANTENA INTERIOR . . . . . . . . . . . . . . . . . . . . . . . . 35

CONEXIÓN A TOMAS DE ENTRADA EXTERNA. . . . 35

■ CONEXION MOVIL . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

CONEXIÓN A UN SISTEMA ESTÉREO . . . . . . . . . . . . 35

CONEXIÓN A UN AMPLIFICADOR EQUIPADO CON

TOMAS DE ENTRADA DIGITAL, PLATINA MD O

PLATINA DAT (Para DVD) . . . . . . . . . . . . . . . . . . . . . . 35

CONEXCIONA UN DECODIFICADOR DOLBY

DIGITAL (Para DVD)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

TV SECTION

■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 37

SELECCIÓN DE IDIOMA . . . . . . . . . . . . . . . . . . . . . . . 37

BORRADO (O AGREGACION) DE CANALES . . . . . . 37

DVD SECTION

■ REPRODUCCIÓN DE UN DVD DE VÍDEO O UN

CD DE AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

REPRODUCCION BASICA . . . . . . . . . . . . . . . . . . . . . . 38

CONTROLES DE

OPERACIÓN Y FUNCIONES

PANEL FRONTAL DEL

TELEVISOR/DVD

Consulte la figura 1 de la página 8

MANDO A DISTANCIA

Consulte la figura 2 de la página 8

VISTA POSTERIOR

Consulte la figura 3 de la página 8

1. Bandeja de carga del disco

2. Toma de entrada VIDEO

Conecte aquí la toma de salida de vídeo de una

videocámara o de una videograbadora.

3. Tomas de entrada AUDIO L/R

Conecte aquí las tomas de salida de audio de una

videocámara o de una videograbadora.

4. Botón POWER

Púlselo para conectar y desconectar la alimentación.

5. Botones VOLUME o/p(VOL.m/n)

Púlselos para controlar el nivel del volumen para

el DVD y el televisor.

6. Botones CHANNEL o/p(CH.o/p)

Púlselo para seleccionar el canal memorizado.

Púlselo para cambiar a un modo de televisor

cuando esta en el modo de DVD.

Ventanilla del sensor del mando a distancia

8. Botón STOP

Detiene la operación del disco.

9. Botón SKIP H

Reproduce desde el inicio del capítulo o canción actual.

Botón SEARCH (REV) h (panel delantero)

Durante la reproducción o en el modo de pausa,

mantenga presionado el botón durante unos

segundos para cambiar la velocidad de

reproducción hacia atrás.

10. Botón PLAY

Inicia la reproducción del contenido del disco.

Púlselo para cambiar a un modo de DVD cuando

esta en el modo de televisor.

11. Botón SKIP G

Reproduce desde el inicio del siguiente capítulo

o canción.

Botón SEARCH (FWD) g (panel delantero)

Durante la reproducción o en el modo de pausa,

mantenga presionado el botón durante unos

segundos para cambiar la velocidad de

reproducción en avance.

12. Botón PAUSE

Hace una pausa en la operación del disco.

13. Botón OPEN/CLOSE

Púlselo para insertar discos en la bandeja o

retirarlos de ella.

14. Toma HEADPHONE

Para conectar auriculares (no suministrados) y

escuchar en privado.

15. Botón MODE

Activa el modo de reproducción programada o el

modo de reproducción aleatoria cuand se

reproducen CDs o MP3.

16. Botones de números

Modo del televisor:

Pulse dos dígitos para tener acceso directamente

al canal deseado.

Recuerde pulsar "0" antes de elegir un canal de

un solo dígito.

Botón +100

Púlselo para seleccionar canales de televisión por

cable cuyo número sea igual o superior al 100.

Modo DVD:

Púlselo para introducir el número deseado.

Botón +10

Púlselo para introducir los números deseados

cuyo número sea igual o superior al 10.

17. Botón SLEEP

Pulse el botón SLEEP para visualizar el

temporizador para dormir y activar la función.

La hora de apagado puede determinarse por el

número de veces que usted pulsa el botón. (0,

30,60,90 o 120 minutos)

18. Botón REV h

Presione para ver la imagen en DVD en retroceso

rápido. Presione PAUSE y presione este botón para

empezar la reproducción en cámara lenta. Presione

repetidamente este botón para cambiar la velocidad

en avance de la cámara lenta.

Botón FWD g

Presione para avanzar rápidamente en el disco.

Presione PAUSE y presione este botón para

empezar la reproducción en cámara lenta.

Presione repetidamente este botón para cambiar

la velocidad de avance de la cámara lenta.

19. Botón ZOOM

Expand la Imagen para que llene toda la pantalla.

TD005ES.QX33 04.7.30 1:35 PM Page 33

–

0C28

20. Botón SETUP

Púlselo para activar o salir del modo de menús

de televisor o preparación de DVD.

21. Botón TITLE

Visualiza el menú de títulos.

22. Botón CLEAR

Repone un ajuste.

23. Botón DISPLAY

Modo del televisor:

Púlselo para visualizar el número del canal en la pantalla.

Si lo pulsa de nuevo, el número del canal desaparecerá.

Modo de DVD:

Visualiza el estado actual en la pantalla del

televisor con fines de comprobación.

24. Botón SEARCH MODE

Púlselo para localizar un punto deseado.

25. Botón AUDIO

Púlselo para seleccionar un idioma de audio o un

modo de sonido deseado.

26. Botón SUBTITLE

Púlselo para seleccionar un idioma de subtítulos deseado.

27. Botón REPEAT

Repite la reproducción del disco, título, capítulo

o pista actual.

28. Botón ANGLE

Púlselo para cambiar el ángulo de la cámara y

ver, desde un ángulo diferente, la secuencia que

está siendo reproducida.

29. Botón A-B REPEAT

Repite la reproducción de una sección seleccionada.

30. Botón RETURN

Para volver a la operación anterior.

31. Botón ENTER

Púlselo para establecer un ajuste.

32. Botones de flechas

Modo de televisor:

Púlselo para seleccionar un modo de ajuste desde

el menú que aparece en la pantalla del televisor.

Púlselo para seleccionar o ajustar desde un menú

particular.

Modo de DVD:

Se utiliza cuando se hacen ajustes mientras se observa

la visualización en una pantalla de televisor.

33. Botón DISC MENU

Visualiza menús en el DVD.

34. Botón SELECT

Púlselo para cambiar a un modo de televisor,

modo de entrada externa o modo de DVD.

35. Botón MUTE

Pulse el botón MUTE para apagar el sonido de

un programa de TV. (La visualización del nivel

del sonido cambia de ROJO CLARO a AZUL

CLARO.) Pulse de nuevo el botón MUTE o el

botón VOL

m o n para restaurar el sonido.

36. Botón PICTURE

Presione para entrar en el modo de ajuste de imagen.

37. Cable de alimentación

Conéctelo a una toma de CA convencional

(120 V/60 Hz).

NOTA: Cuando seleccione el modo DVD con

este botón, pulse primero PLAY u

OPEN/CLOSE. De lo contrario, las funciones

del DVD no se activarán.

NOTA:

Retire el cable de alimentación del gancho

para evitar romperlo antes de conectarlo a

una toma de CA convencional.

38. Toma de salida analógica AUDIO L/R

Conéctela a la entrada de audio analógico de un

amplificador o sistemo estéreo externo.

39. Toma de salida de audio digital COAXIAL

(DVD Audio solamente)

Conéctela a la entrada digital de un amplificador

o decodificador externo.

40. Toma de entrada ANT.

Conéctela a una antena, sistema de televisión por

cable o sistema de satélite.

41. Toma DC 13.2V

Conecte en el cable de batería del coche.

ANTENA COMBINADA DE VHF/UHF

La antena combinada de VHF/UHF de 75 ohmios

puede conectarse al terminal ANT.

PREPARACIÓN PARA LA

UTILIZACIÓN

Nota para el instalador de sistemas CATV

Esta nota tiene la finalidad de llamar la atención del

instalador de sistemas CATV para que tenga en

cuenta el Artículo 820-40 del NEC, el cual

proporciona consejos para hacer una conexión a

tierra apropiada y, en particular, especifica que la

tierra del cable deberá estar conectada al sistema de

puesta a tierra del edificio, tan cerca del punto de

entrada del cable como sea posible.

NOTA:

Antes de enchufar la antena a la toma ANT.IN del

televisor/DVD, compruebe que la clavija no esté

doblada. Si esta doblada, póngala derecha como se

muestra en la ilustración, y luego conéctela en la

toma ANT.IN del televisor/DVD.

1) Abra la cubierta del compartimiento de las pilas

empujando la cubierta del mando a distancia en el

sentido de la flecha.

2) Inserte 2 pilas "AA" en el compartimiento de las

pilas, en el sentido indicado por las marcas de

polaridad (+/-).

3) Vuelva a poner la cubierta.

NOTAS:

•

No mezcle pilas alcalinas y de manganeso.

•

No mezcle pilas viejas y nuevas.

PARA INSERTAR LAS PILAS

CONEXIONES DE

ANTENA/CABLE

Clavija doblada

Cable Clavija

(Necesita enderezarse) (Clavija derecha)

Consulte la figura 4 de la página 10

TD005ES.QX33 04.7.30 1:35 PM Page 34

–

0C28

NOTA:

•

Cuando conecte una videograbadora monofónica

(otra fuente) a este televisor/DVD, conecte la toma

de salida de audio de la videograbadora

monofónica (otra fuente) a la toma AUDIO L de

este televisor/DVD. El audio saldrá igualmente por

los canales izquierdo y derecho.

Consulte la figura 6 de la página 11

ANTENA SEPARADAS DE VHF/UHF

En algunas zonas será necesario utilizar una antena

exterior.

TELEVICION POR CABLE SIN CAJA

DE CONVERTIDOR / DECODIFICADOR

Utilice esta conexión si su sistema de televisión por

cable se conecta directamente a su televisor/DVD sin

una caja de convertidor. Utilice el mando a distancia

del televisor/DVD para seleccionar los canales.

TELEVICION POR CABLE CON CAJA

DE CONVERTIDOR/DECODIFICADOR

O CAJA DE SATRLITE

Si su compañía de televisión por cable le suministra

una caja de convertidor, o si usted utiliza un sistema

de satélite, usted podrá utilizar la conexión básica

mostrada aquí.

La selección de los canales deberá hacerse con la caja

de convertidor o con la caja de satélite. Esto significa

que los canales no se podrán cambiar utilizando el

mando a distancia del televisor/DVD.

PARA VER UN CANAL

CODIFICADO/DECODIFICADO

1) Ponga el selector de canales del televisor/DVD

en la posición del canal de salida de la caja de

convertidor de televisión por cable o de la caja de

satélite. (Ej., CH3)

2) Seleccione el canal que va a ver en su caja de

convertidor de televisión por cable o caja de

satélite.

La antena interior (suministrada) es desmontable.

Inserte el vástago de la antena en el orificio de la

parte posterior superior del televisor/DVD. Conecte

la antena interior al televisor/DVD. Para obtener la

mejor recepción, extienda completamente la antena

interior y luego haga los ajustes necesarios. (Evite

tocar la sección superior cuando haga los ajustes.)

NOTA:

• La conexión de una antena interior puede no dar

siempre una recepción de TV aceptable.

Cuando vea un programa grabado en otra fuente

(videograbadora o videocámara), utilice las tomas de

entrada de audio/vídeo de la parte delantera del

televisor/DVD.

Conecte las tomas de salida de audio/vídeo de otra

fuente a las tomas AUDIO L/R y VIDEO de este

televisor/DVD. Luego pulse SELECT hasta que

aparezca "AUX" en la pantalla.

LA ANTENA INTERIOR

CONEXIÓN A TOMAS DE

ENTRADA EXTERNA

Consulte la figura 5 de la página 10

NOTAS:

•

Asegrese de desconectar la alimentación de todos

los componentes del sistema antes de conectar otro

componente.

•

Consulte el manual del propietario de su sistema

estéreo y de cualquier otro componente que vaya a

conectar al televisor/DVD.

•

Se escucha un sonido monoaural del sistema

estéreo cuando el TV/DVD está en el modo de TV.

Utilice un cable digital coaxial de audio de venta en

el comercio especializado para hacer las conexiones

de audio.

NOTAS:

•

La fuente de audio de un disco en un formato de

sonido ambiental Dolby Digital de 5,1 canales no

se puede grabar como sonido digital mediante una

platina MD o DAT.

•

Asegúrese de desconectar la alimentación de todos

los componentes antes de conectar otro

componente.

•

Consulte los manuales del propietario de los

componentes que va a conectar al televisor/DVD.

•

Ponga DOLBY DIGITAL en OFF para la salida de

audio en el modo de preparación. La reproducción

en un televisor/DVD utilizando ajustes incorrectos

puede causar distorsión de ruido, y también se

pueden dañar los altavoces.

Consulte la figura 8 de la página 12

CONEXIÓN A UN

AMPLIFICADOR EQUIPADO

CON TOMAS DE ENTRADA

DIGITAL, PLATINA MD O

PLATINA DAT (Para DVD)

Consulte la figura 7 de la página 11

CONEXIÓN A UN SISTEMA

ESTÉREO

TD005ES.QX33 04.7.30 1:35 PM Page 35

NOTAS:

•

Cerciórese que su vehículo tiene un sistema eléctrico

con tierra negativa de 13,2 voltios (12 voltios).

•

Cerciórese de utilizar sólo el cable de batería de coche

entregado. El uso de otros cables puede dañar el

TV/DVD.

•

Cerciórese que la toma está limpia de cenizas y otros

restos.

•

Cerciórese de enchufar firmemente el cable de batería

de coche en la toma del encendedor de cigarrillos.

•

Desenchufe siempre la batería del coche de la toma

del encendedor de cigarrillos antes de desenchufarlo

del TV/DVD.

•

Debe desconectar el cable de batería de coche del

TV/DVD antes de poder uti-

lizar la electricidad de CA.

•

Cerciórese de cambiar el

fusible sólo por uno del mismo

tipo, 6A, 250V.

•

Asegúrese de que el cable de

CA esté bobinado como se

muestra más abajo.

Si utiliza este televisor/DVD para reproducir un disco

DVD en un formato de sonido ambiental Dolby

Digital de 5,1 canales, el televisor/DVD dará salida a

un flujo de datos DOLBY DIGITAL desde su toma

de salida de audio digital COAXIAL. Conectando el

reproductor a un decodificador Dolby Digital, usted

podrá disfrutar de un ambiente más convincente y

real, con un sonido ambiental potente y de alta

calidad similar al de los cines.

Utilice cables digitales coaxiales de audio disponibles

en el comercio especializado para hacer las

conexiones de audio.

NOTAS:

•

Asegúrese de desconectar la alimentación de todos

los componentes del sistema antes de conector a

otro componente.

•

Consulte los manuales del propietario de los

componentes que vaya a conectar al televisor/DVD.

•

Si conecta un decodificador Dolby Digital, ponga

DOLBY DIGITAL en ON para la salida de audio

en el modo de preparación.

•

A menos que se haga la conexión a un

decodificador Dolby Digital , ponga DOLBY

DIGITAL en OFF para la salida de audio en el

modo de preparación. La reproducción en el

televisor/DVD utilizando ajustes incorrectos puede

generar distorsión de ruido, y también puede

estropear los altavoces.

Consulte la figura 9 de la página 112

CONEXCIONA UN

DECODIFICADOR DOLBY

DIGITAL (Para DVD)

Fabricado bajo licencia de Dolby

Laboratories. “Dolby” y el símbolo de la D

doble son marcas de fábrica de Dolby

Laboratories.

1) La antena interior entregada es adecuada cuando

el vehículo está estacionado. Para una mejor

recepción en la calle o carretera, utilice una antena

de TV móvil de VHF/UHF de alta calidad.

2) Enchufe el cable de batería de coche en el conec-

tor DC13,2 V (12V) en la parte trasera del

TV/DVD.

AUDIO OUT

DC 13.2V

COAXIAL

ANT.

DC13.2V

ANT.

Antena móvil con

combinación de

VHF/UHF (no entregada)

Para la toma del encendedor

de cigarrillos del vehículo.

Cable de batería

de coche

(entregado)

CONEXION MOVIL

ADVERTENCIA: El conductor nunca debe

mirar el TV/DVD mientras conduce un

vehículo.

PELIGRO:

•

No utilice este TV/DVD durante la conducción.

•

No deje el TV/DVD en un coche.

•

En el caso de utilizar el TV/DVD en un

vehículo en movimiento, el propietario es el

responsable de fijarlo firmemente, o de

montarlo permanentemente en el interior del

vehículo, para evitar que salga despedido y

cause lesiones a los ocupantes del mismo en

el caso de producirse un accidente.

•

Si utiliza el TV/DVD con el motor del vehículo

parado, vuelva a cargar la batería del

vehículo después de unas 4 horas de uso

para evitar que se agote. Después de

terminar de utilizar el TV/DVD cerciórese de

desenchufar el cable de batería de coche de

la toma del encendedor de cigarrillos.

•

Este TV/DVD no fue diseñado para utilizar en

un coche. Le recomendamos utilizar este

TV/DVD cerca de su automóvil.

•

No deje el TV/DVD bajo una luz solar intensa

durante mucho tiempo. La caja podría

deformarse.

AUDIO OUT

DC 13.2V

COAXIAL

ANT.

0C28

–

TD005ES.QX33 04.7.30 1:35 PM Page 36

Puede programar el sintonizador para explorar todos

los canales que pueda recibir en su zona.

NOTA: La programación de la memoria de canales

no es necesaria cuando se hace la conexión a una caja

de televisión por cable o a una caja de satélite. Ponga

el selector de canales del televisor/DVD en la

posición correspondiente al canal de salida de la caja

de televisión por cable o caja de satélite (ej., CH3).

Luego seleccione el canal que va a ver en la caja de

televisión por cable o en la caja de satélite.

SELECCIÓN DE IDIOMA

–

0C28

5 Tras la exploración

El sintonizador se detiene en el canal memorizado

más bajo. Si desea recuperar los canales

seleccionados, podrá seleccionar los canales

directamente con los botones de números o

CHANNEL(CH.) K o L.

Los canales que ya no reciban más o que se vean

muy raramente podrán borrarse de la memoria. (Por

supuesto, podrá volver a agregar en la memoria los

canales que haya borrado de la misma.)

1 Seleccione “AJUSTE DE CANAL”

Pulse SETUP en el mando a distancia. Pulse K o L

para apuntar a "AJUSTE DE CANAL".

Luego, pulse ENTER.

2 Seleccion “AGREGAR/BORRAR”

Pulse K o L para apuntar a "AGREGAR/BORRAR".

Luego, pulse ENTER.

3 Introduzca el número del canal deseado

Pulse K o L hasta que aparezca el número del canal

deseado. (Podrá utilizar también los botones de

números o CH. K/L para introducirlos.)

(Ejemplo: CH8)

4 Bórrelo de la memoria o agréguelo a ella

Pulse ENTER. Los números de los canales se

encienden en rojo. El canal se borra de la memoria.

Canal agregado: Azul claro

Canal borrado: Rojo claro

¡Para borrar otro canal, repita los pasos [3] y [4].

¡Si pulsa de nuevo ENTER, el canal se memorizará

de nuevo.

5 Salga del modo de preparación de

canales

Pulse SETUP en el mando a distancia para volver al

modo del televisor.

NOTA:

Para confirmar que los canales hayan sido borrado o

agregados, pulse CHANNEL(CH.) K o L.

1 Preparacion de canales por primera vez

Enchufe el cable de alimentación del televisor/DVD

en una toma de CA.

NOTA:

Si aparecen algunos dígitos en la esquina de la

pantalla, pulse POWER sin desenchufar el cable de la

alimentación.

2 Encienda el televisor/DVD

Pulse POWER para encender el televisor/DVD.

3 Seleccione el idioma de la pantalla

Pulse K o L para apuntar a "LANGUAGE".

Luego, pulse ENTER para seleccionar "ENGLISH" o

"ESP" = Spanish o "FRA" = French. "[ ]" indica el

idioma seleccionado.

4 Inicie el preajuste automático

Pulse K o L para apuntar a

"AUTOPRESELECCION". Luego, pulse ENTER. El

sintonizador explora y memoriza todos los canales

activos de su zona.

NOTAS:

• El televisor/DVD distingue entre los canales de TV

estándar y los canales de televisión por cable

(CATV).

• El televisor/DVD puede memorizar canales de TV

como canales de CATV si las condiciones de la

recepción no son buenas. Si pasa esto, vuelve a

intentar la acción AUTOPRESELECCION cuando

las condiciones de la recepción sean mejores.

TV SECTION

PREPARACIÓN PARA LA

UTILIZACIÓN

BORRADO

(O AGREGACION) DE CANALES

TD005ES.QX33 04.7.30 1:35 PM Page 37

–

0C28

REPRODUCCION BASICA

Para empezar

¡Conecte el interruptor del amplificador y otros

equipos, si fuera necesario.

1 Pulse el boton POWER.

¡La alimentación se conectará.

2 Pulse el botón OPEN/CLOSE.

¡La bandeja de carga del disco se abrirá.

3 Ponga el dlsco en la bandeja con el lado

de la eliguta hacia arriba.

4 Pulse el botón PLAY.

¡La bandeja se cerrará automáticamente y la

reproducción empezará luego desde el primer

capítulo o pista del disco. Si la reproducción no

empieza automáticamente, pulse PLAY.

¡Cuando reproduzca un DVD que tenga grabado un

menú de títulos, el menú aparecerá en la pantalla.

Pulse el botón STOP para detener la

reproducción.

CDDVD-V

DVD SECTION

REPRODUCCIÓN DE UN

DVD DE VÍDEO O UN CD

DE AUDIO

TD005ES.QX33 04.7.30 1:35 PM Page 38

–

0C28

MEMO

TD005ES.QX33 04.7.30 1:35 PM Page 39

Printed in Malaysia 0EMN02160

TD005UF ★★★★★

FULL 90 DAY WARRANTY

For 90 days from the date of purchase, Sears will repair any defect in material or workmanship in

this TV/DVD, free of charge. For one year from the date of purchase, SEARS will supply, at no

charge, replacement for defective parts.

Two (2) years for Picture Tube. Certain parts are excluded from this warranty.

The above warranty coverage applies only to TV/DVD which are used for private household purposes

TO OBTAIN WARRANTY SERVICE, SIMPLY RETURN THE TV/DVD TO THE NEAREST SEARS

SERVICE CENTER IN THE UNITED STATES.

This warranty gives you specific legal rights, and you may also have other rights which vary from

state to state.

Registered Trademark /

Trademark /

Service Mark of Sears, Roebuck and Co.

Marca Registrada /

Marca de Fábrica /

Marca de Servicio de Sears, Roebuck and Co.

Marque de commerce /

Get it fixed, at your home or ours!

Our Home

For repair of carry-in items like vacuums, lawn equipment,

and electronics, call or go on-line for the location of your nearest

Sears Parts & Repair Center.

1-800-488-1222

Call anytime, day or night (U.S.A. only)

www.sears.com

To purchase a protection agreement on a product serviced by Sears:

1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)

Para pedir servicio de reparación

a domicilio, y para ordenar piezas:

1-888-SU-HOGAR

(1-888-784-6427)

Au Canada pour service en français:

1-800-LE-FOYER

(1-800-533-6937)

www.sears.ca

Your Home

For repair

in your home

of all major brand appliances,

lawn and garden equipment, or heating and cooling systems,

no matter who made it, no matter who sold it!

For the replacement parts, accessories and

owner's manuals that you need to do-it-yourself.

For Sears professional installation of home appliances

and items like garage door openers and water heaters.

1-800-4-MY-HOME

(1-800-469-4663)

Call anytime, day or night

(U.S.A. and Canada)

www.sears.com www.sears.ca

Sears Roebuck and Co., Dept. 817WA Hoffman Estates, IL 60179

For the location of a Sears Service Center in your area : 1-800-488-1222

TD005.QX33 04.7.30 1:34 PM Page 33

Sylvania TV DVD Combo SRTD309 Manual de usuario

Marca: Sylvania

Modelo: TV DVD Combo SRTD309

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Este manual también es adecuado para

Descargar PDF

informe

En otros idiomas

English: Sylvania TV DVD Combo SRTD309 User manual

Sylvania TV DVD Combo SRTD309 Manual de usuario

Este manual también es adecuado para

Sylvania TV DVD Combo SRTD309 Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos