SV2000 6520FDF Manual de usuario

Marca: SV2000

Modelo: 6520FDF

Categoría: Reproductores de DVD

Tipo: Manual de usuario

9-INCH COLOR TV/DVD

EWC09D5

EWC09D5 B

OWNER’S

MANUAL

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

If you need additional assistance for set-up or operating after

reading owner’s manual, please call

TOLL FREE : 1-800-256-2487.

Or visit our WEB SITE at http://www.EmersonAudioVideo.com

Please read before using this equipment

“EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS

OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.”

–

1.Read instructions-All the safety and operating instructions

should be read before the appliance is operated.

2.Retain Instructions-The safety and operating instructions

should be retained for future reference.

3.Heed Warnings-All warnings on the appliance and in the

operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions

should be followed.

5.Cleaning-Unplug the unit from the wall outlet before clean-

ing. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the possi-

bility of the loss of an authorization code for a CATV con-

verter, is not intended to be unplugged by the user for clean-

ing or any other purpose, may exclude the reference to

unplugging the appliance in the cleaning description other-

wise required in item 5.

6.Attachments-Do not use attachments not recommended by

the unit manufacturer as they may cause hazards.

7.Water and Moisture-Do not use this unit near water-for

example, near a bath tub, wash bowl, kitchen sink, or laun-

dry tub, in a wet basement, or near a swimming pool, and

the like.

8.Accessories-Do not place this unit on an unstable cart,

stand, tripod, bracket, or table. The unit may fall, causing

serious injury to someone, and serious damage to the appli-

ance. Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the unit.

Any mounting of the appliance

should follow the manufacturer’s

instructions and should use a mount-

ing accessory recommended by the

manufacturer. An appliance and cart

combination should be moved with

care.

Quick stops, excessive force, and

uneven surfaces may cause the appli-

ance and cart combination to over-

turn.

Accessoires- Ne placez pas cet appareil sur une table

roulante, un support, un trépied, une console ou une table

instable. Cet appareil risquerait de tomber, pouvant grave-

ment blesser quelqu'un et l'appareil même pourrait être

sérieusement endommagé. N'utilisez qu'une table roulante,

un support, un trépied, une console ou une table recom-

mandé par le fabriquant, ou vendu avec l'appareil. Pour

n'importe quelle installation de l'appareil, on devra suivre

les instructions du fabriquant et l'on devra utiliser les acces-

soires d'installation recommandés par le fabriquant.

L'ensemble combiné de l'appareil avec une table roulante

devra être déplacé avec précaution. Des arrêts brusques,

une force excessive et des surfaces inégales peuvent provo-

quer le renversement de l'ensemble combiné de

l'appareil/table roulante.

9. Ventilation-Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reliable

operation of the unit and to protect it from overheating, and

these openings must not be blocked or covered. The open-

ings should never be blocked by placing the unit on a bed,

sofa, rug, or other similar surface. This unit should never be

placed near or over a radiator or heat register. This unit

should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or

the manufacturer’s instructions have been adhered to.

10.Power Sources-This unit should be operated only from the

type of power source indicated on the marking label. If you

are not sure of the type of power supply to your home, con-

sult your appliance dealer or local power company. For

units intended to operate from battery power, or other

sources, refer to the operating instructions.

11.Grounding or Polarization-This unit is equipped with a

polarized alternating-current line plug(a plug having one

blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try revers-

ing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

PORTABLE CART WARNING

AVERTISSEMENT POUR UNE

TABLE ROULANTE PORTATIVE

S3126A

IMPORTANT SAFEGUARDS

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

The caution marking is located on the rear of the cabinet.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT

DANGEROUS VOLTAGE

CONSTITUTING A RISK OF ELECTRIC

SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE

APPLIANCE.

–

GROUND CLAMPS

NEC - NATIONAL ELECTRICAL CODE

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

S2898A

WIRE

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

ELECTRODE SYSTEM

(NEC ART 250, PART H)

SERVICE

EQUIPMENT

CLAMP

ANTENNA

LEAD IN

ANTENNA

POWER SERVICE GROUNDING

GROUND

ELECTRIC

FIGURE A

12.Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience receptacles,

and the point where they exit from the appliance.

13.Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the unit, be sure the antenna or

cable system is grounded so as to provide some protection

against voltage surges and built-up static charges. Article

810 of the National Electrical Code, ANSI/NFPA No. 70,

provides information with respect to proper grounding of

the mast and supporting structure, grounding of the lead-in

wire to an antenna discharge unit, size of grounding con-

ductors, location of antenna-discharge unit, connection to

grounding electrodes, and requirements for the grounding

electrode. (Fig. A)

14.Lightning-For added protection for this unit receiver dur-

ing a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will

prevent damage to the unit due to lightning and power-line

surges.

15.Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them

might be fatal.

16.Overloading-Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind

into this unit through openings as they may touch danger-

ous voltage points or short out parts that could result in a

fire or electric shock. Never spill liquid of any kind on the

unit.

18.Servicing-Do not attempt to service this unit yourself as

opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified

service personnel.

19.Damage Requiring Service-Unplug this unit from the wall

outlet and refer servicing to qualified service personnel

under the following conditions:

a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the

unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the oper-

ating instructions. Adjust only those controls that are cov-

ered by the operating instructions, as improper adjustment

of other controls may result in damage and will often

require extensive work by a qualified technician to restore

the unit to its normal operation.

e. If the unit has been dropped or damaged in any way.

f. When the unit exhibits a distinct change in performance-

this indicates a need for service.

20.Replacement Parts-When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock, injury to persons or other haz-

ards.

21.Safety Check-Upon completion of any service or repairs to

this unit, ask the service technician to perform routine safe-

ty checks to determine that the unit is in proper operating

condition.

22.Heat-This unit product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

–

RADIO-TV INTERFERENCE

This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pur-

suant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be deter-

mined by turning the equipment off and on, the

user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment

and receiver.

3) Connect the equipment into an outlet on a cir-

cuit different from that to which the receiver is

connected.

4) Consult the dealer or an experienced radio/TV

technician for help.

FCC WARNING- This equipment may gener-

ate or use radio frequency energy. Changes or

modifications to this equipment may cause

harmful interference unless the modifications

are expressly approved in the instruction man-

ual. The user could lose the authority to oper-

ate this equipment if an unauthorized change

or modification is made.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public perfor-

mance and lending of discs are prohibited.

This product incorporates copyright protection tech-

nology that is protected by U.S. patents and other

intellectual property rights. Use of this copyright

protection technology must be authorized by

Macrovision, and is intended for home and other

limited viewing uses only unless otherwise autho-

rized by Macrovision. Reverse engineering or dis-

assembly is prohibited.

LASER SAFETY

This unit employs a laser. Only a qualified service

person should remove the cover or attempt to ser-

vice this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUST-

MENTS OR PERFORMANCE OF PROCE-

DURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN AND INTERLOCK

DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK

MECHANISM.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est con-

forme à la norme NMB-003 du Canada.

PRECAUTIONS

The serial number of this product may be found on the back of the unit. No other unit has the same serial

number as yours. You should record the number and other vital information here and retain this book as a per-

manent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

A NOTE ABOUT RECYCLING

Batteries should never be thrown away or incinerat-

ed but disposed of in accordance with your local

regulations concerning chemical wastes.

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC

ÉLECTRIQUES, INTRODUIRE LA LAME LA

PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE

ET POUSSER JUSQU’AU FOND.

–

AV OID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

LOCATION

For safe operation and satisfactory performance of

your unit, keep the following in mind when selecting

a place for its installation:

•

Shield it from direct sunlight and keep it away from

sources of intense heat.

•

Avoid dusty or humid places.

•

Avoid places with insufficient ventilation for proper

heat dissipation. Do not block the ventilation holes at

the top and bottom of the unit. Do not place the unit

on a carpet because this will block the ventilation

holes.

•

Install the unit in a horizontal position.

•

Avoid locations subject to strong vibration.

•

Do not place the unit near strong magnetic fields.

•

Avoid moving the unit to locations where tempera-

ture differences are extreme.

•

Do not handle the power cord with wet hands.

•

Do not pull on the power cord when disconnecting

it from an AC wall outlet. Grasp it by the plug.

•

If by accident, water is spilled on your unit, unplug

the power cord immediately and take the unit to our

Authorized Service Center for servicing.

•

Do not put your fingers or objects into the unit disc

loading tray.

•

Do not place anything directly on top of the unit.

WARNING

Moisture condensation may occur inside the unit

when it is moved from a cold place to a warm place

or after heating a cold room or under conditions of

high humidity. If a DVD is played in a unit which has

moisture, it may damage the DVD and the unit.

Therefore when the condensation occurs inside the

unit, turn the unit on and allow at least 2 hours for the

unit to dry out.

The following symbols below appear in some head-

ings and notes in this manual, with the following

meanings

: Description refers to TV operation (in the TV mode).

: Description refers to playback of DVD video discs

(in the DVD mode).

: Description refers to playback of audio CDs

(in the DVD mode).

: Description refers to the items to be set by the

QUICK mode (in the DVD mode).

QUICK

DVD-V

SYMBOLS USED IN THIS MANUAL

Owner’s

Manual

SUPPLIED ACCESSORIES

BatteriesRemote Control Unit

2 AA Batteries

(NE221UD)

Owner’s Manual

(1EMN20217)

•

If you need to replace these accessories, please refer to the PART NO. under the illustrations and call 1-800-

256-2487.

•

Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators

(Splitter). Contact your local electronics store for these items.

Indoor Antenna

Matching Adapter

Car Battery Cord

(WPC0202GA001

or WPC0202HHH01)

(0EMN00723 or

0EMN01183)

(1813641 or 1780258

or UCPGANTPK004)

Carrying Bag

(1EMN20243)

*Only EWC09D5 B

–

TABLE OF CONTENTS

C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2

C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

AVOID THE HAZARDS OF ELECTRICAL

SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

SYMBOLS USED IN THIS MANUAL . . . . . . .5

C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .5

C TABLE OF CONTENTS . . . . . . . . . . . . . . . . . .6

C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

OPERATING CONTROLS AND FUNCTIONS

. . .8

INSTALLING THE BATTERIES . . . . . . . . . . .9

C PREPARATION FOR USE . . . . . . . . . . . . . . .10

ANTENNA/CABLE CONNECTION . . . . . . . .10

INDOOR ANTENNA . . . . . . . . . . . . . . . . . . .10

CONNECTING TO EXTERNAL INPUT JACKS

MOBILE CONNECTION . . . . . . . . . . . . . . . .11

CONNECTING TO A STEREO AMPLIFIER

EQUIPPED WITH DIGITAL INPUT JACKS

(for DVD)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

CONNECTING TO A DOLBY DIGITAL

DECODER (for DVD) . . . . . . . . . . . . . . . . . . .13

TV SECTION

C TV OPERATION AND SETTINGS . . . . . . . . .14

SET UP FOR THE FIRST TIME . . . . . . . . . . .14

WATCHING A TV PROGRAM . . . . . . . . . . . .14

PICTURE CONTROL . . . . . . . . . . . . . . . . . . .15

DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .15

SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .15

CHANNEL RESETTING . . . . . . . . . . . . . . . . .16

MENU LANGUAGE . . . . . . . . . . . . . . . . . . . .17

DVD SECTION

C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .18

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .18

UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . .18

C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .19

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . .19

GENERAL FEATURES . . . . . . . . . . . . . . . . . .19

DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . .19

TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . .19

RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

STEP BY STEP PLAYBACK . . . . . . . . . . . . .20

FAST FORWARD / FAST REVERSE . . . . . . .20

SLOW FORWARD / SLOW REVERSE . . . . .20

C SEARCH FUNCTION . . . . . . . . . . . . . . . . . .21

TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . .21

TITLE / CHAPTER SEARCH . . . . . . . . . . . . .21

TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . .21

MARKER SETUP SCREEN . . . . . . . . . . . . . .21

C SPECIAL PLAYBACK FUNCTION . . . . . . . .22

REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .22

RANDOM PLAYBACK . . . . . . . . . . . . . . . . .22

C CHANGING THE SETTINGS . . . . . . . . . . . .23

SUBTITLE LANGUAGE . . . . . . . . . . . . . . . .23

AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . .23

STEREO SOUND MODE . . . . . . . . . . . . . . . .23

CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . .24

BLACK LEVEL SETTING . . . . . . . . . . . . . . .24

VIRTUAL SURROUND . . . . . . . . . . . . . . . . .24

C THE ON-SCREEN INFORMATION . . . . . . .25

C CHANGING THE DVD SETUP ITEMS . . . .26

CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . .26

LANGUAGE SETTING . . . . . . . . . . . . . . . .26

DISPLAY SETTING . . . . . . . . . . . . . . . . . . .27

AUDIO SETTINGS . . . . . . . . . . . . . . . . . . .27

PARENTAL CONTROL . . . . . . . . . . . . . . . .28

INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . .28

C TROUBLESHOOTING GUIDE . . . . . . . . . . .29

C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .31

DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .31

C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .32

C ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover

–

––

–

TV Mode

•

181 channel capability PLL frequency synthesiz-

er tuner with direct station call

(A converter may be necessary to view scrambled

cable channels.)

•

Infrared remote control

•

Trilingual on screen menu display selectable in

English, Spanish, or French

¡Sleep Timer

Allows you to have the unit automatically turn off at a

desired time.

¡Auto Shut Off Function

If there is no air signal input from the antenna terminal and

no operation for 15 minutes, the TV will turn itself off

automatically.

FEATURES

DVD Mode

¡Dolby Digital sound

This unit can handle Dolby Digital surround sound

having 5.1 channels when connected to a Dolby Digital

decoder.

¡Still/fast/slow/step playback

Various playback modes are available including still pic-

tures, fast forward/reverse, slow motion and step frames.

¡Random playback for Audio CD

This unit can shuffle the order of tracks to play them in

random order.

¡Program playback for Audio CD

You can program the order of tracks to play them in any

desired order.

¡DVD menus in a desired language

You can display DVD menus in a desired language, if

available on a DVD.

¡Screen saver/Auto power-off functions

The screen saver program starts when there is no input

from the unit for 5 minutes in the stop mode. After the

screen saver program is activated for 15 minutes, the

power automatically turns off.

¡Subtitles in a desired language

You can select a desired language for the display subtitles,

if that language is available on a disc.

¡Selecting a camera angle

You can select the desired camera angle, if a disc contains

sequences recorded from different angles.

¡Choices for audio language and sound mode

You can select the desired audio language and sound mode,

if different languages and modes are available on a disc.

¡Parental lock

You can set the control level to limit playback of discs

which may not be suitable for children.

¡Automatic detection of discs

This unit automatically detects if the loaded disc is DVD

or Audio CD.

¡On-screen display

Information about the current operation can be displayed

on a TV screen, allowing you to confirm the currently

active functions (such as program playback), on the TV

screen using the remote control.

¡Search

Chapter search / Title search / Track search / Time search

¡Repeat

Chapter / Title / Track / All / A-B

¡Marker

The part designated by user can be called back.

¡Resume Play

User can resume to playback from the part at which the

play was stopped.

¡Virtual Surround

¡Bit rate indication

¡DRC (Dynamic range control)

You can control the range of sound volume.

NOTE:

•

We do not recommend the use of universal remote controls. Not all of the functions may be controlled with

a universal remote control.

If you decide to use a universal remote control with this unit, please be aware that the code number given

may not operate this unit. In this case, please call the manufacturer of the universal remote control.

–

DC 13.2V

COAXIAL

ANT.

39 4038

REAR VIEW

[Fig. 3]

–

––

–

7.Remote Sensor Window

8.C STOP Button [page 19]

Stops operation of the disc.

9.H SKIP Button [page 21]

Plays back from the beginning of the current

chapter or track.

E SEARCH Button (Front Panel)

[page 20]

During playback or in the pause mode, press and

hold button down

for a few seconds to change

reverse playback speed.

10. B PLAY Button [page 19]

Starts playback of the disc contents.

Hit to change to DVD mode when TV mode.

11. SKIP G Button [page 21]

Plays back from the beginning of the next chapter

or track.

SEARCH D Button (Front Panel)

[page 20]

During playback or in the pause mode, press and

hold button down

for a few seconds to change for-

ward playback speed.

12.

PAUSE Button [page 20]

Pauses the current disc operation.

13. A OPEN/CLOSE Button [page 19]

Hit

to insert a disc into or remove it from the tray.

14. HEADPHONE Jack

To connect headphone (not supplied) for personal

listening.

15. MODE Button [pages 22-24]

Activates program playback or random playback

mode when playing CDs.

16. Number Button

TV Mode:

[page 14]

Hit

two digits to directly access the desired channel.

Remember to hit [0] before a single digit channel.

+100 Button–

Hit to select cable channels which are higher than

99.

DVD Mode: [page 21]

Hit to enter the desired number.

+10 Button–

Hit to enter the desired numbers which are higher

than 9.

HEADPHONE

CHANNEL

VOLUME

POWER

AUDIO

VIDEO

OPEN/CLOSE

PAUSE

SKIPSKIP

STOP PLAY

742 8 9 10 11 12 13 146531

REV

SLOW

PLAY

STOP

FWD

ENTER

PAUSE

DISC

RETURNTITLESETUP

REPEATSEARCH MODE

CLEAR

MODE

ANGLESUBTITLEAUDIO

DISPLAY

SKIP

SELECT

POWER PICTURE

OPEN/

CH.

VOL.

MUTEV.SURR

SLEEP

123

456

789

0 +10

+100

OPERATING CONTROLS AND FUNCTIONS

FRONT PANEL

REMOTE CONTROL

[Fig. 2]

[Fig. 1]

1.Disc loading tray

2.VIDEO input Jack [page 11]

Connect to the video output jack of a video

camera or VCR.

3.AUDIO L/R input Jacks [page 11]

Connect to the audio output jacks of a video

camera or VCR.

4.POWER Button [page 14]

Hit to turn the power on and off.

5.VOLUME (VOL.) K / L Buttons

Press to control the volume level for the DVD and TV.

CHANNEL (CH.) K / L Buttons [page 14]

Press to select memorized channel.

Press to change to TV mode when in DVD mode.

–

––

–

30. RETURN Button [page 21, 24]

Returns to the previous screen in the setup menu.

31. ENTER Button [pages 14, 19]

Hit

to accept a setting.

32. K / L / s / B Buttons

TV Mode: [page 14]

Press to select a setting mode from the menu on

the TV screen.

Press to select or adjust from a particular menu.

DVD Mode: [page 19]

Press to select a menu item.

33. DISC MENU Button [page 19]

Calls up the DVD menu.

34. SELECT Button [pages 11, 19]

Hit

to change to TV mode, external input mode or

DVD mode.

35. MUTE Button

Mutes the sound

(Volume level display turns LIGHT RED from

LIGHT BLUE.)

Hit

it again or press [VOL. X / Y] to restore sound.

36. PICTURE Button [page 15]

Hit

to enter picture adjustment mode.

37. Power cord

Connect to a standard AC outlet (120V/60Hz).

38. COAXIAL Jack (DVD Audio Only)

Connect to the digital input of an external

amplifier or decoder.

39. ANT(ENNA). Jack

Connect to an antenna, cable system, or satellite

system.

40. DC 13.2V Jack

Connect to the Car Battery Cord.

NOTE: Remove the power cord from the hook

to avoid breaking a wire before you connect to

a standard AC outlet.

NOTE:

When you select the DVD mode by this

button, press [PLAY O] or [OPEN/CLOSE A]

first. Otherwise, the DVD features are not operated.

17. SLEEP Button [page 15]

Sets the sleep timer.

18. REV h Button [page 20]

Hit to

fast reverse the Disc.

Hit [PAUSE F], then hit

this button to begin slow motion playback. Hit this

button repeatedly to change the reverse speed of slow

motion.

FWD g Button [page 20]

Hit

to fast forward the Disc. Hit [PAUSE

], then

hit

this button to begin slow motion playback.

Hit

this button repeatedly to change the forward speed

of slow motion.

19. V.SURR (VIRTUAL SURROUND) Button

[page 24]

Hit to set virtual surround on/off.

20. SETUP Button [pages 16, 26-28]

Hit

to enter or exit the setup menu of TV or

DVD.

21. TITLE Button [page 19]

Displays the title menu.

22. CLEAR Button [pages 21-22]

Hit to clear or cancel a setting currently entered.

23. DISPLAY Button

TV Mode:

Hit

to display the channel number on the screen.

If you hit it again, the channel number will disap-

pear.

DVD Mode: [page 25]

Displays the current status on the TV screen.

24. SEARCH MODE Button [page 21]

Hit

to locate a desired point.

25. AUDIO Button [page 23]

Hit

to select a desired audio language or sound

mode.

26. SUBTITLE Button [page 23]

Hit

to select a desired subtitle language.

27. REPEAT Button [page 22]

Repeats playback of the current disc, title, chapter

or track.

28. ANGLE Button [page 24]

Hit

to change the camera angle to see the sequence

being played back from a different angle

(if available).

29. A-B Button [page 22]

Repeats playback of a selected section.

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing

the cover on the remote unit in the direction of the

arrow.

2)Insert 2 “AA” penlight batteries into the battery

compartment in the direction indicated by the

polarity (+/-) markings.

3)Replace the cover.

[BATTERY PRECAUTIONS]

•

Be sure to follow the correct polarity as indicated

in the battery compartment. Reversed batteries

may cause damage to the device.

•

Do not mix different types of batteries together

(e.g. Alkaline and Carbon-Zinc) or old batteries

with fresh ones.

•

If the device is not to be used for a long period of

time, remove the batteries to prevent damage or

injury from possible battery leakage.

•

Do not try to recharge batteries not intended to be

recharged; they can overheat and rupture.

–

NOTE:

•

Before plugging the an antenna into the ANT. jack of the unit, check that the

pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin

into the ANT. jack of the unit.

–

––

–

PREPARATION FOR USE

ANTENNA/CABLE CONNECTION

The Indoor Antenna (supplied) is detachable. Insert the stem of the antenna into the

hole on the upper-back portion of the unit. Connect the Indoor Antenna to the unit

as shown in the diagram. For the best reception, fully extend the Indoor Antenna

and make the necessary adjustments. (Avoid touching the top section when adjust-

ing.)

NOTE:

•

The connection of an Indoor antenna may not always give acceptable TV

reception.

CABLE WITHOUT CONVERTER/

DESCRAMBLER BOX

Use this connection if your cable system connects

directly to the unit without a converter box.

CABLE WITH CONVERTER/DESCRAM-

BLER BOX OR SATELLITE BOX

If your cable service supplies you with a converter

box or if you use a satellite system, you can use the

basic connection shown above.

Channel selection must be made with the converter

box or satellite box. This means that channels cannot

be changed using the remote control of this unit.

Bent pin

Cable

Plug

(Needs to be straightened)(Straight pin)

UHF

VHF

VHF/UHF

VHF

UHF

VHF

UHF

DC 13.2V

COAXIAL

ANT.

OUT IN

VHF/UHF COMBINED ANTENNA

A VHF UHF 75 ohm combination antenna can be

connected to ANT. jack of the unit.

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor

antenna.

INDOOR ANTENNA

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding

system of the building as close to the point of cable entry as practical.

[Fig. 5]

Indoor Antenna

(Supplied)

Flat twin-lead cable

DC 13.2V

COAXIAL

ANT.

Matching

Adapter

(Supplied)

VHF/UHF

Combiner

Flat twin-

lead cable

From Cable System

75-ohm

Coaxial Cable

CATV Box or

Satellite Box *

From Cable System or

Satellite Antenna

[Fig. 4]

[ANTENNA CONNECTION]

[CATV/SATELLITE CONNECTION]

*Some cable TV systems use scrambled signals and

require a special converter to receive these channels.

Consult your local cable company.

Adaptor

75-ohm

Coaxial Cable

NOTE:

•

For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. jack

before moving the unit.

Cables used here are commercially available.

–

POWER

VIDEO

AUDIO

VIDEO

ex.

VCR or video camera

, etc.

(OUT) Audio Cable (IN)

(commercially available)

(OUT) Video Cable (IN)

(commercially available)

–

––

–

CONNECTING TO EXTERNAL INPUT JACKS

NOTES:

•

Be sure your vehicle has a 13.2-volt (12-volt), nega-

tive-ground electrical system.

•

Be sure you use only the supplied car battery cord.

Using another cord could damage the unit.

•

Be sure the socket is free of ashes and other debris.

•

Be sure to push the car battery cord’s plug completely

into the cigarette-lighter socket.

•

Always unplug the car battery from the cigarette-

lighter socket before you unplug it from the unit.

•

You must disconnect the car battery cord from the unit

before you can use the AC power.

•

Be sure to replace the fuse with only the same type, 6A, 250V.

WARNING: The driver should never watch the unit while operating a motor vehicle.

CAUTION:

•

When used in moving vehicle, be sure that the unit is secure at all the times to prevent injury.

Consult a professional installer.

•

If you use the unit with the vehicle’s engine off, recharge the vehicle’s battery after about every

4 hours of use to prevent it from running down. After you finish using the unit be sure you

unplug the car-battery cord from the cigarette-lighter socket.

•

Do not use this unit while driving.

•

Do not leave this unit in a car.

•

This unit is not designed for use in a car.

DC 13.2V

COAXIAL

ANT.

DC13.2V

ANT.

VHF/UHF Combination

Mobile Antenna

(Not supplied)

To the vehicle's

cigarette-lighter socket

Car battery cord

(Supplied)

1) The supplied indoor antenna is adequate when your

vehicle is stationary. For best reception on the road,

use a high-quality VHF/UHF mobile TV antenna.

2) Attach the car battery cord to the DC13.2V(12V)

connector on the back of the unit. Then, connect the

other end to your vehicle’s cigarette-lighter socket.

When you watch a program recorded on another source (VCR or video camera), use the

AUDIO/VIDEO input jacks on the front of the unit.

Connect the AUDIO/VIDEO output jacks of another source to the AUDIO L/R and

VIDEO jacks of this unit.

Then

hit

[SELECT] until “AUX” appears on the screen.

AUX

NOTE:

•

When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the monaural

VCR (another source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equally.

MOBILE CONNECTION

[Fig. 6]

To the Audio output jacks

To the Video output jack

–

CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH

DIGITAL INPUT JACKS (for DVD)

Use an audio coaxial digital cable (commercially available) for the audio connections.

Connect to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.

NOTES:

•

The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital

sound by an MD or DAT deck.

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner’s Manuals for the components to be connected to the unit.

•

Set DOLBY DIGITAL to “OFF” for audio output in the setup mode. Playing a unit using incorrect settings

may generate noise distortion, and may also damage the speakers. (Refer to page 27 to set DOLBY

DIGITAL to “OFF”.)

DC 13.2V

COAXIAL

ANT.

ex.

MD deck, DAT deck, etc.

To Coaxial digital

Audio input jack

Audio coaxial digital cable

(commercially available)

To COAXIAL jack

(Only DVD AUDIO OUT)

(OUT)(IN)

COAXIAL

[Fig. 7]

–

––

–

––

–

CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)

If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a

DOLBY DIGITAL Data stream from its COAXIAL jack. By hooking the unit up to a Dolby Digital decoder,

you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as

enjoyed in movie theaters.

Use audio coaxial digital cables (commercially available) for the audio connections.

NOTES:

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner’s Manuals for the components to be connected to the unit.

•

If connected to a Dolby Digital decoder, set DOLBY DIGITAL to “ON” for audio output in the setup mode.

(Refer to page 27 to set DOLBY DIGITAL to “ON”.)

•

Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to “OFF” for audio output in the setup

mode. Playing a unit using incorrect settings may generate noise distortion, and may also damage the speak-

ers.

DC 13.2V

COAXIAL

ANT.

Front speaker

(left)

Center

speaker

Front speaker

(right)

Surround

speaker

(left)

Surround

speaker

(right)

Subwoofer

(IN)

(OUT)

To COAXIAL jack

(Only DVD AUDIO OUT)

Dolby Digital decoder

To Coaxial digital

Audio input jack

Audio coaxial

digital cable

(commercially

available)

COAXIAL

[Fig. 8]

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are

trademarks of Dolby Laboratories.

–

––

–

SET UP FOR THE

FIRST TIME

1 Plug in the unit power cord

Plug the unit power cord into a standard

AC outlet.

NOTE:

•

If some digits appear in the corner of

the screen,

hit

[POWER] without

unplugging the power cord.

2 Turn on the unit

Hit

[POWER] to turn on the unit.

3 Select the On Screen Language

Press [K / L] to point to “LAN-

GUAGE”, then

hit

[ENTER] to

select “ENGLISH” or

“ESP”=Spanish or “FRA” =French.

“[ ]” indicate the selected language.

4 Begin auto preset

Press [K / L] to point to “AUTO

PRESET”, then

hit

[ENTER].

The tuner scans and memorizes all

active channels in your area.

NOTES:

•

The unit distinguishes between

standard TV channels and cable (CATV) channels.

•

The unit may memorize TV channels as CATV

channels if reception condition is poor. If this hap-

pens, try “AUTO PRESET” action again when

reception conditions are better. Refer to “CHAN-

NEL RESETTING” on page 16.

5 After scanning

The tuner stops on the lowest memorized channel.

You can select the desired channel directly with

the

Number buttons or [CH. K / L].

NOTE:

•

Channel memory programming is NOT needed

when connected to a cable box or satellite box. Just

select the unit channel selector to the output chan-

nel of the cable box or satellite box (Ex CH3).

Then select the channel to be viewed on the Cable

Box or Satellite Box.

– SET UP –

B LANGUAGE

[ENGLISH] ESP FRA

AUTO PRESET

– SET UP –

LANGUAGE

[ENGLISH] ESP FRA

B AUTO PRESET

TV OPERATION AND SETTINGS

WATCHING A TV PROGRAM

1 Turn on the unit

Hit

[POWER] to turn on the unit.

2 Select the channel number

Press [CH. K / L] to select your desired channel

number or press the Number buttons.

Note for using the Number buttons:

¡When selecting cable channels which are higher

than 99, hit +100 first, then press the last two dig-

its. (Example: to select channel 125, first

hit

[+100] then

hit

[2] and [5]).

¡You must precede single-digit channel numbers

with a zero (For example: 02, 03, 04 and so on).

3 Adjust sound

Press [VOL. X / Y] to adjust the volume.

Hit

[MUTE] to instantly mute the sound.

Hit it again to restore the previous sound level.

NOTE:

•

If you press [CH. K / L] in the

DVD mode, you can change the

TV channels.

Even if you turn off the unit in the

DVD mode, when you turn it on

again, it will go into the TV

mode.

VOLUME 20

C C C C C C C C C C C C C C C C

TO WATCH CABLE OR SATELLITE

CHANNEL

•

If the unit is connected to a cable box or satellite

box, press [CH. K / L] to select CH3 or CH4

according to the output channel setting of the

device, and select desired channel on that device.

TO WATCH EXTERNAL INPUT

•

When an external equipment is connected to the

front AUDIO/VIDEO input jacks, press [SELECT]

or [CH. K / L] repeatedly until “AUX” appears on

the screen.

TV SECTION

–

––

–

DEGAUSSING

This television has a degaussing circuit that will clear

up color errors on the TV screen that are caused by

any excess magnetism which happens to get too close

to the TV. This circuit is designed to operate once

when the set is first plugged in. If minor color

errors are seen in some locations on the screen,

please unplug the TV for approximately 30 min-

utes. When the TV is plugged back in, the degauss-

ing circuit will operate once to clear them up. Repeat

this procedure any time the TV screen is accidentally

magnetized or when the TV is moved or relocated.

BRIGHT to decrease to increase

brightness brightness

CONTRAST to decrease to increase

contrast contrast

COLOR to pale to brilliant

TINT to purple to green

SHARPNESS to soft to clear

PICTURE CONTROL

The unit’s picture controls – BRIGHT, CON-

TRAST, COLOR, TINT and SHARPNESS – are

preset to factory specifications. Although they are

usually the best, you may need to make some further

adjustments for a natural looking image.

Make sure ...

•

The unit must be turned on.

1 Select “PICTURE CONTROL”

Hit

[PICTURE].

2 Select item you want to adjust

Press [K / L] until desired control is displayed.

BRIGHT

CONTRAST

COLOR

TINT

SHARPNESS

3 Adjust the picture control

Press [s / B] to adjust to your desired level within

5 seconds.

NOTE:

•

At step 3, the picture adjustment display will dis-

appear from the TV screen after about 5 seconds

unless you press any buttons, even though you may

not be finished. In this case, repeat from step 1.

•

If there is a power failure of any kind, the unit will

retain its memory for this feature.

BRIGHT

–

PP PP PP PP PP PP PP CC PP PP PP PP PP PP PP

The Sleep Timer function turns off the unit without

using [POWER] after a desired period of time.

1 Call up the Sleep Timer Setting

Hit [SLEEP] so that “SLEEP TIMER” appears.

2 Set sleep time

Hit [SLEEP] repeatedly until your desired sleep time

appears.

Each additional hit will increase the

time by 30 minutes up to 120 min-

utes.

After 5 seconds, the Sleep Timer

setting will disappear automatically.

NOTE:

•

When you disconnect the unit from the AC outlet,

or if you have a power failure, the sleep time will

be lost.

•

To confirm the time left for sleep timer, hit

[SLEEP] once and the display appears for 10 sec-

onds.

TO CANCEL THE SLEEP TIMER

Hit [SLEEP] to call up the Sleep Timer Setting. Hit

[SLEEP] repeatedly until “SLEEP 0 MINUTES”

appears.

SLEEP 120 MINUTES

SLEEP TIMER

–

––

–

CHANNEL RESETTING

Make sure ...

•

The unit power must be turned on.

RESETTING CHANNELS

1 Select “CHANNEL SET UP”

Hit

[SETUP] on the remote control.

Press [K / L] to point to “CHAN-

NEL SET UP”, then

hit

[ENTER].

2 Begin auto preset

Press [K / L] to point to “AUTO PRESET”, then

hit

[ENTER].

The tuner scans and memorizes all the active chan-

nels in your area.

NOTES:

•

The unit distinguishes between standard TV chan-

nels and cable(CATV) channels.

•

The unit may memorize TV chan-

nels as CATV channels if recep-

tion conditions is poor. If this

happens, try “AUTO PRESET”

action again when reception con-

ditions are better.

3 After scanning

The tuner stops on the lowest memorized channel.

- TV SETUP -

B CHANNEL SET UP

LANGUAGE [ENGLISH]

– CHANNEL SET UP –

ADD / DELETE CH (TV)

B AUTO PRESET

ADDING/DELETING CHANNELS

The channels you no longer receive or seldom watch

can be deleted from the memory. (Of course, you can

add the deleted channel into the memory again.)

1 Select “CHANNEL SET UP”

Hit

[SETUP].

Press [K / L] to point to “CHAN-

NEL SET UP”, then hit [ENTER].

2 Select “ADD/DELETE CH”

Press [K / L] to point to

“ADD/DELETE CH”, then hit

[ENTER].

3 Enter the desired channel number

Press [K / L] until your desired

channel number appears (You can

also use the Number buttons or

[CH. K / L] to enter it).

4 Delete (or add) it from (into) memory

Hit

[ENTER]. The channel number changes to light

red. The channel is deleted from memory.

•

To delete another channel, repeat steps 3 and 4.

•

If you hit [ENTER] again, the channel is memo-

rized again.

5 Exit the channel setup mode

Hit

[SETUP] to exit the menu.

NOTE:

•

To confirm that channel(s) has been deleted or

added, hit [CH.

Added channel: Light blue.

Deleted channel: Light red.

- TV SETUP -

B CHANNEL SET UP

LANGUAGE [ENGLISH]

– CHANNEL SET UP –

B ADD / DELETE CH (TV)

AUTO PRESET

ADD / DELETE

(Example: CH8)

–

––

–

MENU LANGUAGE

1 Select “LANGUAGE”

Hit [SETUP].

Press

[K / L] to point to “LAN-

GUAGE”, then hit [ENTER] to

select “ENGLISH” or

“ESPAÑOL”= Spanish or

“FRANÇAIS”= French.

2 Exit the Language mode

Hit [SETUP] to return to exit the menu.

NOTE:

•

This function effects only the language on the

screen menu and not the audio source.

•

If Spanish or French is selected accidentally,

1) Hit

[SETUP].

2) Press

[K / L] to point to “IDIOMA

[ESPAÑOL]” or “LANGAGE” [FRANÇAIS].

3) Hit

[ENTER] to select your desired language.

4) Hit

[SETUP] to exit the menu.

- TV SETUP -

CHANNEL SET UP

B LANGUAGE [ENGLISH]

–

––

–

ABOUT THE DISCS

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot

be played back.

*2:

Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.

*3: Scratched or stained discs may not be played back.

*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the

recorder or special properties of discs.

*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not

play them back. Even if they are played back, the sound or video quality will be compromised.

*6: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD

recorder. However, depending on the recording status of a disc, the disc may not be played back at all or

normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc with

the DVD recorder. Refer to the manual accompanying the DVD recorder.

*7: Only the discs recorded in the video format and finalized can be played back.

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be

played back at all or normally (the picture or sound may not be smooth, etc.).

*8: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may not

play back properly.

*9:

Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read it correctly.

*10: The number inside the symbol refers to a region of the world and a disc encoded in a specific region for-

mat can only be played back on unit with the same region code.

This label indicates playback compatibility with DVD-RW discs recorded in VR mode (Video Recording Format)

NOTE:

• This player cannot play the DVD-RW that supports CPRM (Contents Protection for Recordable Media).

• This player cannot play the DVD-R discs recorded in VR mode (Video Recording Format).

DVD-Video

* 1,2,3,10

* 1,3,4,5,7,8,9

* 1,3,4,5,6

8,9

* 3,5

* 3,4,5,8,9

DVD-RW

DVD-R

DVD+RW

DVD+R

Audio CD

CD-RW

CD-R

Digital video

(MPEG2)

Digital audio

Region code

Mark (logo)

Playable

discs

Recorded

signals

Disc size

Disc types

12 cm

8cm

12 cm

8cm

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1

Chapter 2

Chapter 3 Chapter 4

Example

Tr ack 1

Tr ack 2

Tr ack 5

Tr ack 6

Tr ack 3

Tr ack 4

Audio CD

NEVER play back the following discs. Otherwise, malfunction may result!

DVD-RAM / CD-I / Photo CD / Video CD / DVD with region codes other than 1 or ALL /

DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3

On the following disc, the sound MAY NOT be heard.

Super Audio CD

NOTE: Only the sound recorded on the normal CD layer can be delivered.

The sound recorded on the high density Super Audio CD layer cannot be delivered.

Any other discs without compatibility indications

PLAYABLE DISCS

UNPLAYABLE DISCS

is a trademark of DVD Format/Logo Licensing Corporation.

DVD SECTION

–

––

–

BASIC PLAYBACK

Getting started

¡Turn on the power of amplifier and any other com-

ponents, if necessary.

1 Hit [POWER].

¡The power will turn on.

2 Hit [OPEN/CLOSE A] to open disc loading

tray.

3 Place the chosen disc in the tray, with the

label facing up.

DVD-V

PLAYING A DISC

4 Hit [PLAY O].

¡The tray will close automatically and playback will

then start from the first chapter or track of the disc.

¡Closing the disc tray manually or hitting

[OPEN/CLOSE A] also starts playback.

¡If the playback does not start automatically, hit

[PLAY O].

¡When you playback a DVD which features a title

menu, it may appear on the screen. In this case, refer

to “TITLE MENU”.

5 Hit [STOP C] to stop playback.

NOTES:

¡When the DVD mode has been switched to the TV

mode, the DVD mode shuts down first and then the

TV picture and sound appears in about 4 seconds.

Similarly, when

[POWER] is hit to turn off in the

DVD mode, this mode shuts down first and then the

unit’s power is turned off.

¡A “prohibited icon” may appear at

the top-right on the TV screen dur-

ing operation, warning that a pro-

hibited operation has been encoun-

tered by the DVD or the disc.

¡With DVDs that use titles for playback program sig-

nals, playback may start from the second title or it

may skip these titles.

¡During the playback of a two layered disc, pictures

may stop for a moment. This happens when the 1st

layer switches to the 2nd layer. This is not a mal-

function.

GENERAL FEATURES

DVD may contain menus to navigate the disc and access

special features. Press appropriate the Number buttons

or use [

K / L / s / B

] to highlight your selection in the

DVD main menu and hit [ENTER] to confirm.

NOTES:

¡Select DVD mode by hitting [SELECT]. Then press

[PLAY O] or [OPEN/CLOSE

] before you oper-

ate the DVD functions.

¡Unless stated, all operations described are based on

remote control use. Some operations can be carried

out using the menu bar on the TV screen.

DVD-V

TITLE MENU

1 Hit [TITLE].

¡The title menu will appear.

2 If the feature is not available, symbol

may appear on the TV screen.

3 Press [K / L / s / B] to select an item and

hit [ENTER] to confirm selection.

DVD-V

DISC MENU

1 Hit [DISC MENU].

¡The DVD main menu will appear.

2 If the feature is not available, symbol

may appear on the TV screen.

3 If disc menu is available on the disc, audio

language, subtitle options, chapters for the

title and other options will appear for selec-

tion.

4 Press [K / L / s / B] to select an item and

hit [ENTER] to confirm selection.

DVD-V

CALLING UP A MENU SCREEN

DURING PLAYBACK

¡Hit [DISC MENU] to call up the DVD menu.

¡Hit [TITLE] to call up the title menu.

NOTE:

¡Contents of menus and corresponding menu opera-

tions may vary between discs. Refer to the manual

accompanying the disc for details.

–

––

–

STEP BY STEP PLAYBACK

1 During playback, hit [PAUSE F].

¡Playback will pause and sound will be muted.

2 The disc goes forward by one frame each

time [PAUSE

F] is hit.

3 To exit step by step playback, hit [PLAY O].

DVD-V

RESUME

1 During playback, hit [STOP C].

¡Resume message will appear on the TV screen.

2 Hit [PLAY O], playback will resume from the

point at which playback was stopped.

¡To cancel resume, hit [STOP C] twice.

¡If the unit is turned off, resume function will be can-

celled.

DVD-V

PAUSE

1 During playback, hit [PAUSE F].

¡Playback will pause and sound will be muted.

2 To continue playback, hit [PLAY O].

DVD-V

1 During playback, press

[FWD

] or [REV

¡“ g 1” or “h 1” appears on the screen.

2 To select another speed, repeat step 1 until

your required speed appears on the screen.

¡For DVDs, fast forward/reverse search speed is dif-

ferent depending on the disc. Approximate speed is

1 (×2), 2 (×8), 3 (×50) and 4 (×100).

¡For Audio CDs, approximate speed is ×16.

¡When you use buttons on the front panel, press and

hold [SEARCH

] for a few seconds.

3 To return to normal playback, hit [PLAY O].

DVD-V

FAST FORWARD /

FAST REVERSE

SLOW FORWARD /

SLOW REVERSE

1 During playback, hit [PAUSE F].

2 Press [FWD g] or [REV h].

¡“ 1” or “ 1” appears on the screen.

3 To select another speed, repeat step 2 until

your required speed appears on the screen.

¡Slow forward or reverse speed varies with the disc.

Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2).

¡When you use buttons on the front panel, press and

hold [SEARCH

] for a few seconds.

4 To return to normal playback, hit [PLAY O].

DVD-V

–

––

–

TRACK SEARCH

There are three ways to begin playback on an Audio

CD at a specific track.

Using the Number buttons

1 Press the Number buttons to enter the

desired Track Number.

¡Playback will start at the selected track.

¡For single digit tracks (1-9), hit a single number (eg.

track 3, hit [3]).

¡To play track 26, hit [+10], [2], [6].

Using [SEARCH MODE]

1 Hit [SEARCH MODE].

¡The Track search display appears.

2 Within 30 seconds, select a desired track

number using the Number buttons.

¡For single digits hit [0] first, if the total track of the

disc is more than 10.

¡Playback will start at the selected track.

Using [SKIP

]

During playback, hit [SKIP

] to move the next

track. Hit it repeatedly to skip subsequent tracks. Hit

[SKIP

] to go back to beginning of the current

track. Hit it repeatedly to go to the previous tracks.

¡If [SKIP

] is pressed while the playback is

paused, the playback will be paused again after skip-

ping to the next track.

NOTE:

¡[SKIP

] are not operative when playback

is stopped.

TITLE / CHAPTER SEARCH

1 Hit [SEARCH MODE] once for the Chapter

search, twice for the Title search during

playback.

2 Enter the desired chapter/title number using

the Number buttons.

¡Playback will start at the selected chapter or title.

¡Hit [CLEAR] to erase the incorrect input.

¡For single digits hit [0] first, if the total chapter or

title of the disc is more than 10.

DVD-V

_/2

TIME SEARCH

1 During playback, hit [SEARCH MODE] three

times (CD: twice) to display the Time Search

on the TV screen.

2 Within 30 seconds, enter a desired disc

time using the Number buttons.

¡Playback will start at the specified time.

¡Hit [CLEAR] to erase the incorrect input.

¡When there is no need to enter a number, “0”

appears automatically. For example, “ 0 : 0

- -

”

appears in the Time Search display if the total time

of the track or title is less than 10 minutes.

DVD-V

SEARCH FUNCTION

MARKER SETUP SCREEN

Use markers to memorize your favorite places on a

disc.

1 Hit [SEARCH MODE] four times (CD: three

times) during playback.

¡The display screen and Markers will appear on the

TV screen.

2 Press [s / B] to select 1, 2, 3, 4, 5, 6, 7, 8, 9,

or 10 and ensure that “

- - - -

- -

”

appears in the display.

3 When you reach the desired point, hit

[ENTER].

¡The title or track and elapsed playing time will

appear in the TV screen.

4 To return to the Marker later, hit [SEARCH

MODE] four times (CD: three times) during

playback and [

s / B] to choose the desired

marker, then hit [ENTER].

NOTES:

¡Operations which erase all Markers:

– Opening the disc tray

– Turning off the power

– Hitting [SELECT]

– Selecting “AC” at step 2 and hitting [ENTER]

¡To clear a marker:

– Press [s / B], position the cursor on to the mark-

er number and hit [CLEAR].

¡You can mark up to 10 points.

5 Press [SEARCH MODE] or [RETURN] to exit.

DVD-V

–

––

–

REPEAT

REPEAT TITLE / CHAPTER

To activate the repeat function, hit [REPEAT]

during playback.

¡The repeat mode changes as described below every

time you hit the button.

DVD-V

REPEAT is available only during playback.

CHAPTER TITLE OFF

(current chapter repeat) (current title repeat)

(repeat

off)

NOTES:

¡Repeat Title/Chapter is not available with some

scenes.

¡The REPEAT setting will be cleared when moving

to other title or chapter.

REPEAT TRACK

To activate the repeat function, hit [REPEAT]

during playback.

¡The repeat mode changes as described below every

time you hit the button.

TRACK ALL OFF

(current track repeat) (entire disc repeat)

(repeat

off)

NOTES:

¡Repeat setting will be cleared when moving to other

track.

¡Repeat playback does not function during A-B

repeat playback.

A-B REPEAT

1 Hit [A-B] at your chosen starting point.

¡“ A-” appears briefly on the TV screen.

2 Hit [A-B] again at your chosen end point.

¡“ A-B” appears briefly on the TV screen, and the

repeat sequence begins.

3 To exit the sequence, hit [A-B].

NOTES:

¡The A-B repeat section can only be set within the

current title (for DVDs) or current track (for Audio

CDs).

¡A-B repeat is not available with some scenes in DVD.

To cancel the A point which was set, hit [CLEAR]

¡A-B repeat playback does not function during title,

chapter, track or all repeat playback.

DVD-V

PROGRAM

You may determine the order in which tracks will play.

1 In stop mode, hit [MODE].

¡The “PROGRAM” screen will appear.

2 Press [▲ / ▼] to select a track, then hit

[ENTER].

¡Hit [CLEAR] to erase the

most recently entered pro-

gram.

3 Repeat step 2 until you have selected all the

tracks you want to play in the program.

4 Hit

[PLAY O]

to play the programmed tracks.

NOTES:

¡While the program is being played back, the STOP

works as follows.

¡Hit [STOP C ] once and then [PLAY O ] again,

playback will restart from the point where

[STOP C ] was hit. (Program continued)

¡Hit [STOP C] twice and then [PLAY O] again,

playback will restart from the track in the usual

way. (Program canceled)

¡Up to 99 tracks can be entered.

¡To erase all tracks in the program at once, select

“ALL CLEAR” at the bottom of the list at step 2.

¡If you like to repeat the current track in the program,

hit [REPEAT] several times until “ TRACK”

appears during playback. If you like to repeat the

entire program hit [REPEAT] several times until

“ ALL” appears during playback.

TOTAL 1: 03: 30

RANDOM PLAYBACK

This shuffles the playing order of tracks instead of

playback in the sequence.

1 In stop mode, hit [MODE] twice.

¡“RANDOM” screen appears.

2 Hit

[PLAY O]

to start random playback.

NOTE:

If you like to repeat the current track in the random

selection, hit [REPEAT] several times until “

TRACK” appears during playback. If you like to

repeat the entire random selection hit [REPEAT] sev-

eral times until “ ALL” appears during playback.

SPECIAL PLAYBACK FUNCTION

PLAY

CD-DA TOTAL 0:45:55

RANDOM PROGRAM

- - no indication - -

RANDOM

–

––

–

AUDIO LANGUAGE

The unit allows you to select a language during DVD

(if multi languages are available) playback.

1 Hit [AUDIO] during playback.

2 Hit [AUDIO] repeatedly to select your

desired language.

NOTE:

¡Hitting [AUDIO] may not work on some DVDs

with multiple audio languages (e.g. DVDs which

allow audio language setting on the disc menu).

DVD-V

STEREO SOUND MODE

1 Hit [AUDIO] repeatedly during playback to

select between “STEREO”, “L-CH” or “R-CH”.

¡STEREO - both right and left channels are active

(stereo)

L-CH - only left channel is active

R-CH - only right channel is active

NOTE:

¡If the Virtual Surround setting is ON, the sound

mode will be fixed to “STEREO” and can not be

changed.

The unit allows you to select a language for subtitles

during DVD (if available) playback.

1 Hit [SUBTITLE] during playback.

¡The subtitle language will be

displayed on the display bar at

the top of the screen.

2 Hit [SUBTITLE] repeatedly to select your

desired subtitle language.

3 To turn off subtitles, hit [SUBTITLE] repeat-

edly until OFF appears.

NOTES:

¡Some discs allow audio language setting/subtitle

language setting on the disc menu. (Operation varies

between discs, so refer to the manual accompanying

the disc.)

¡If the desired language is not shown after hitting

[SUBTITLE] several times, the disc does not have

subtitles in that language.

¡When “NOT AVAILABLE” appears on the TV

screen, it means no subtitle is

recorded on the scene.

¡If you choose a Language that has a 3 letter language

code, the code will be displayed every time you

change the Subtitle language setting. If you choose

any other languages, “---” will be displayed instead.

(Refer to page 26.)

DVD-V

SUBTITLE LANGUAGE

CHANGING THE SETTINGS

1.ENG/6

1.ENG Dolby D 3/2.1ch 48k/3

STEREO

NOT AVAILABLE

–

––

–

CAMERA ANGLE

Some DVDs contain scenes which have been shot

simultaneously from various angles. You can change

the camera angle when the “

”

icon appears on the

screen.

1 Hit [ANGLE] during playback.

¡If the “ANGLE ICON” setting

is “OFF” in the “DISPLAY”

menu, the “ ” icon will not

appear. (Refer to page 27.)

2 Hit [ANGLE] repeatedly to select your

desired angle.

¡The selected angle will be displayed on the display

bar at the top of the screen.

DVD-V

Adjust the Black Level Settings to make the black

parts of the picture brighter.

1 Hit [MODE] during playback.

2 Hit [ENTER] to switch “ON / OFF”.

ON: Makes the dark parts brighter.

OFF: Shows the original picture as recorded.

3 Press [MODE] twice or [RETURN] to exit.

NOTE:

¡The setting will be saved even if the unit is turned

off.

DVD-V

BLACK LEVEL SETTING

You can enjoy surround-sound effect over two speak-

ers on this unit.

1 Press [V.SURR] once or [MODE] twice

(CD: once) during playback.

2 Hit [ENTER] to set it “1” (Natural effect), “2”

(Emphasized effect) or “OFF”.

3 Press [V.SURR] or [MODE] to exit.

¡You can also exit the menu by hitting [RETURN].

NOTE (for CD play only):

¡Virtual Surround will not be effective if the sound

mode is set to something other than STEREO.

DVD-V

VIRTUAL SURROUND

OFF

1 / 8

–

––

–

For DVD-Vs

1 Hit [DISPLAY] during playback to show cur-

rent Chapter.

¡The elapsed and remaining

playing time of the current

chapter will be displayed.

Hit [DISPLAY] again to show current Title.

¡The elapsed and remaining

playing time of the current title

will be displayed.

3 Hit [DISPLAY] again.

¡The bit rate and the current

repeat setting will be dis-

played.

¡If you are playing a dual layered disc, the layer num-

ber will also be displayed (L0: Layer 0 is playing.

L1: Layer 1 is playing).

4 Hit [DISPLAY] again to exit.

THE ON-SCREEN INFORMATION

For Audio CDs

1 Hit [DISPLAY] during playback to show the

current Track.

¡The elapsed and remaining playing time of the cur-

rent track will be displayed.

2 Hit [DISPLAY] again to show current Total

Track.

¡The elapsed and remaining playing time of the total

track will be displayed.

3 Hit [DISPLAY] again to exit.

NOTE:

¡When you are playing a disc in PROGRAM or

RANDOM mode, “ PROGRAM”

(or RANDOM) will be

displayed at step 2.

You can check the information about the current disc by hitting [DISPLAY].

DVD-V

9/49 0:00:00 -0:03:30

4/12 0:03:21 - 0:02:15

4/12 0:13:45 - 0:45:40

1/3 0:00:00 - 1:23:45

PROGRAM

–

CHANGING THE DVD SETUP ITEMS

CUSTOM MENU

You can change the DVD player’s settings.

1 Hit [SETUP] twice in STOP mode so that the

DVD SETUP menu appears.

¡Hit [L] to select “CUSTOM”

then hit [ENTER].

NOTE:

If the menu does not appear, hit [PLAY O] first,

then hit [STOP C]. Make sure the disc is in STOP

mode, then slowly hit [SETUP] twice.

2 Select the desired item.

¡Press [K / L] to select the desired item then hit

[ENTER] to confirm.

Refer to the pages below to set up each item.

LANGUAGE SETTING

Follow steps

in the “CUSTOM MENU” section

above.

3 Press [K / L] to select the desired item then

hit [ENTER].

AUDIO:

Sets the audio language.

SUBTITLE:

Sets the subtitle language.

DISC MENU:

Sets the language for DVD menu.

4 Press [K / L] to select a setting then hit

[ENTER].

¡If “OTHER” is selected on the

“AUDIO”, “SUBTITLE” or

“DISC MENU” screen, press

four-digit number to enter the

code for the desired language.

(Refer to the language code

list.)

¡Only the languages supported

by the disc can be selected.

5 Hit [SETUP] to exit the menu.

NOTES:

¡Language Setting for Audio and Subtitle are not

valid for some discs due to default setting of the

disc. In this case, set them by hitting [AUDIO] and

[SUBTITLE]. (Refer to page 23.)

¡If you select a language that is not supported by the

disc, subtitle will automatically be set OFF and the

first item of the audio languages will be automatical-

ly set.

DVD-V

If you choose a language that has a 3 letter language

code, the code will be displayed every time you change

the AUDIO or SUBTITLE language setting above. If

you choose any other languages, ‘---’ will be displayed

instead. (3 letter language code is written in bracket.)

Language Code

A-B

Abkhazian 4748

Afar 4747

Afrikaans 4752

Albanian 6563

Amharic 4759

Arabic 4764

Armenian 5471

Assamese 4765

Aymara 4771

Azerbaijani 4772

Bashkir 4847

Basque 5167

Bengali;Bangla 4860

Bhutani 5072

Bihari 4854

Bislama 4855

Breton 4864

Bulgarian 4853

Burmese 5971

Byelorussian 4851

C-E

Cambodian 5759

Catalan 4947

Chinese [CHI] 7254

Corsican 4961

Croatian 5464

Czech 4965

Danish [DAN] 5047

Dutch [DUT] 6058

English [ENG] 5160

Esperanto 5161

Estonian 5166

F-H

Faroese 5261

Fiji 5256

Finnish [FIN] 5255

French [FRE] 5264

Frisian 5271

Galician 5358

Georgian 5747

German [GER] 5051

Greek [GRE] 5158

Greenlandic 5758

Guarani 5360

Gujarati 5367

Hausa 5447

Hebrew 5569

Hindi 5455

Hungarian [HUN] 5467

I-K

Icelandic [ICE] 5565

Indonesian 5560

Interlingua 5547

Interlingue 5551

Inupiak 5557

Irish [IRI] 5347

Italian [ITA] 5566

Japanese [JPN] 5647

Javanese 5669

Kannada 5760

Kashmiri 5765

Kazakh 5757

Kinyarwanda 6469

Kirghiz 5771

Kirundi 6460

Korean [KOR] 5761

Kurdish 5767

Language Code

L-N

Laothian 5861

Latin 5847

Latvian;Lettish 5868

Lingala 5860

Lithuanian 5866

Macedonian 5957

Malagasy 5953

Malay 5965

Malayalam 5958

Maltese 5966

Maori 5955

Marathi 5964

Moldavian 5961

Mongolian 5960

Nauru 6047

Nepali 6051

Norwegian [NOR] 6061

O-R

Occitan 6149

Oriya 6164

Oromo(Afan) 6159

Panjabi 6247

Pashto;Pushto 6265

Persian 5247

Polish 6258

Portuguese [POR] 6266

Quechua 6367

Rhaeto-Romance 6459

Romanian [RUM] 6461

Russian [RUS] 6467

Samoan 6559

Sangho 6553

Sanskrit 6547

Scots Gaelic 5350

Serbian 6564

Serbo-Croatian 6554

Sesotho 6566

Setswana 6660

Shona 6560

Sindhi 6550

Singhalese 6555

Siswat 6565

Slovak 6557

Slovenian 6558

Somali 6561

Spanish [SPA] 5165

Sundanese 6567

Swahili 6569

Swedish [SWE] 6568

Tagalog 6658

Tajik 6653

Tamil 6647

Tatar 6666

Telugu 6651

Thai 6654

Tibetan 4861

Tigrinya 6655

Tonga 6661

Tsonga 6665

Tu rkish [TUR] 6664

Tu rkmen 6657

Tw i 6669

U-Z

Ukrainian 6757

Urdu 6764

Uzbek 6772

Vietnamese 6855

Volapuk 6861

Welsh 4971

Wolof 6961

Xhosa 7054

Yiddish 5655

Yo r uba 7161

Zulu 7267

SETUP LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

SUBTITLE

OFF

ENGLISH

FRENCH

SETUP LANGUAGE

DISC MENU

ENGLISH

FRENCH

SPANISH

SETUP LANGUAGE

AUDIO

ORIGINAL

ENGLISH

FRENCH

SETUP LANGUAGE

SETUP

QUICK

CUSTOM

INITIALIZE

SETUP CUSTOM

LANGUAGE

DISPLAY

AUDIO

PARENTAL

P26 Step

P27 Step

P28 Step

–

––

–

AUDIO SETTINGS

Choose the appropriate Audio settings for your equip-

ment as it only affects during the playback of DVD

Follow steps

in the “CUSTOM MENU” sec-

tion on page 26.

3 Press [K / L] to select the below items then

hit [ENTER].

DRC (Dynamic Range Control):

¡To compress the range of soft

to loud sound.

¡The default setting is “ON”.

DOWN SAMPLING:

¡ON : Output in 48 kHz. (default)

¡OFF : Output the original

sound.

When playing disc with copy-

right Protection

¡If you select “OFF”, copyright protection will be

activated and sound will be down sampled at 48kHz.

DOLBY DIGITAL:

Set to “ON” when the unit is

connected to a Dolby Digital

Decoder.

¡ON : Output a Dolby Digital signal

(default)

¡OFF : Convert the Dolby Digital to PCM

(2 channel stereo)

4 Hit [SETUP] to exit the menu.

QUICK

DISPLAY SETTING

You can change certain aspects of the DVD display

screens and on-screen messages on the TV screen.

Follow steps

in the “CUSTOM MENU” sec-

tion on page 26.

3 Press [K / L] to select the below items then

hit [ENTER].

TV MODE:

¡Press [K / L] for an item

selection, then hit [ENTER].

¡Select “4:3 LETTER BOX”

for black bars to appear on top and bottom of the

screen.

¡Select “4:3 PAN & SCAN” for a full height picture

with both sides trimmed.

¡The default setting is “4:3 LETTER BOX”.

STILL MODE

¡Press [K / L] for an item

selection, then hit [ENTER].

¡Select “AUTO” normally.

¡If you select “FIELD”, the picture in the still mode

will be stabilized.

¡If you select “FRAME”, the picture in the still

mode will be highly defined.

ANGLE ICON:

¡Hit [ENTER] repeatedly to turn Angle icon “ON” or

“OFF”.

¡The default setting is “ON”.

AUTO POWER OFF:

¡Hit [ENTER] repeatedly to turn Auto Power off

“ON” or “OFF”.

The default setting is “ON” and the screen saver pro-

gram starts when there is no input from the unit for 5

minutes in the stop mode. After the screen saver pro-

gram is activated for 15 minutes, the power is auto-

matically turned off.

4 Hit [SETUP] to exit the menu.

QUICK

TV MODE

4:3 LETTERBOX

STILL MODE

AUTO

ANGLE ICON

AUTO POWER OFF

SETUP DISPLAY

TV MODE

4:3 LETTERBOX

STILL MODE

AUTO

ANGLE ICON

AUTO POWER OFF

SETUP DISPLAY

DRC ON

DOWN SAMPLING

DOLBY DIGITAL

SETUP AUDIO

DRC ON

DOWN SAMPLING

DOLBY DIGITAL

SETUP AUDIO

DRC ON

DOWN SAMPLING

DOLBY DIGITAL

SETUP AUDIO

TV SETUP MENU IN DVD MODE

¡Language setting for on-screen menus is only available in TV SETUP menu. You can access it by hitting

[SETUP] in DVD mode (Refer to “MENU LANGUAGE” on page 17.

¡“CHANNEL SETUP” menu is not operative in DVD mode although it is displayed on the screen.

Press [SELECT] to move to TV mode first, then follow steps in “CHANNEL RESETTING” on page 16.

–

––

–

CONTROL LEVELS

ALL

All parental lock is cancelled.

Level 8

DVD software of any grade (adult/general/children)

can be played back.

Levels 7 to 2

Only DVD software intended for general use and

children can be played back.

Level 1

Only DVD software intended for children can be

played back, with those intended for adult and

general use prohibited.

PARENTAL CONTROL

Parental Control limits the disc viewing that exceed

your setting (with a password or playback will stop).

This feature allows you to prevent discs with alterna-

tive scenes from being played by your children.

PARENTAL LEVEL

Parental Level allows you to set the rating level of

your DVD discs. Playback will stop if the disc’s rat-

ings exceed the level you set.

Follow the steps 1 to 2 in the “CUSTOM MENU”

section on page 26.

3 Enter your four-digit password then hit

[ENTER].

4 Press [K / L] to select “PARENTAL LEVEL”

then hit [ENTER].

5 Press [K / L]to select the desired level

then hit [ENTER].

6 Hit [SETUP] to exit the menu.

NOTES:

When doing this for the first time, enter any 4 digits.

(except for 4737) That number will be used as the pass-

word.

To change the password, press [K / L] to select “PASS-

WORD CHANGE” at step 4 then hit [ENTER]. Enter

the four-digit password, then hit [ENTER].

¡With some DVDs, it may be difficult to find if they

are compatible with parental lock. Be sure to check

if the parental lock function operates in the way that

you have set.

¡Record the password in case you forget it.

IF YOU FORGET THE PASSWORD

1 Hit the number buttons [4], [7], [3], [7] at

step 3. Then enter your new password.

¡Password will be cleared and parental level will be

set to “ALL”.

2 Proceed with steps 4 to 6 again.

This allows you to return all selections of SETUP

(except for “PARENTAL” and menu language) to

their default settings.

1 Hit [SETUP] twice in STOP mode so that the

“INITIALIZE” menu appears.

2 Press [K / L] to select “INITIALIZE” then hit

[ENTER].

3 Select “YES” then hit [ENTER] twice.

All the settings (except for

“PARENTAL” and menu

language) will be cleared.

¡To cancel the initialization,

select “NO”.

4 Hit [SETUP] to exit the menu.

DVD-V

SETUP PARENTAL

PASSWORD

Enter current password.

PASSWORD CHANGE

PARENTAL LEVEL ALL

SETUP PARENTAL

PARENTAL LEVEL

ALL

7 [NC-17]

6 [R]

SETUP PARENTAL

SETUP

QUICK

CUSTOM

INITIALIZE

SETUP INITIALIZE

Initialize?

YES

INITIALIZE

–

––

–

If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the player,

consulting the following checklist.

TROUBLESHOOTING GUIDE

Problem Corrective Action

No Picture or Sound

•

Try a new channel, if OK, then possible station trouble.

•

Make sure the power is turned on.

•

Hit [SELECT] on the remote control to select TV mode. Then try

other TV feature.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Check for broken pin of the antenna cable.

Bars On Screen

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

Picture Distorted or Blurred

•

Try a new channel, if OK, then possible station trouble.

•

If outside antenna is being used, check for broken wire.

Picture Rolls Vertically

•

Try a new channel, if OK, then possible station trouble.

Lines or Streaks in Picture

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

No Color

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to jack on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Adjust “COLOR” control.

Poor Reception on Some Channels

•

Try a new channel, if OK, then possible station trouble.

Ghosts in Picture

•

Is antenna connected to jack on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

Weak Picture

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to jack on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Adjust “CONTRAST” & “BRIGHT” control.

Sound OK, Picture Poor

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to jack on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

•

Adjust “CONTRAST” & “BRIGHT” control.

Picture OK, Sound Poor

•

Try a new channel, if OK, then possible station trouble.

•

Check for local interference.

Different color marks on screen.

•

Magnetism from nearby appliances and geomagnetism might affect the

color of the TV picture. Move the unit away from the appliances, the

unit can repair itself automatically. If you want to repair immediately,

unplug the unit power cord, then plug it in again 30 minutes or so later.

Problem Corrective Action

No power.

•

Make sure the power plug is connected to an AC outlet.

•

Make sure the power is turned on.

The unit does not respond to

•

Check if the power plug is connected to an AC outlet.

the remote control.

•

Check the batteries in the remote control.

•

Aim the remote control directly at the remote sensor. If necessary,

remove all the obstacles between the sensor and the remote.

•

You have to be within 23 feet of the unit.

•

Check if the correct mode is selected. If not switch the mode by hit-

ting [SELECT], whichever you need.

TV Mode

Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked

possibilities. Before arranging for service, check these items. It could save your time and money.

–

––

–

NOTES:

•

Some functions are not available in specific modes, but this is not a malfunction. Read the description in

this Owner’s Manual for details on correct operations.

•

Playback from a desired track and random playback are not available during program playback.

–

––

–

DVD Mode

Problem Corrective Action

No picture • Insert a correct video disc that plays on this unit.

• Hit

[SELECT] on the remote control to select DVD mode. Next, press

[PLAY O] or [OPEN/CLOSE

]. Then, try other DVD feature.

Disc cannot be played

• Insert the disc.

• Clean the disc.

• Place the disc correctly, with the label side up.

• Cancel the parental lock or change the control level.

No sound

• Connect the audio cables firmly.

• Turn the power of the audio component on.

• Correct the audio output settings.

• Correct the input settings on the audio component.

No DTS audio is output

• This unit does not support DTS audio. This is not a malfunction.

Distorted picture

• There are some cases where pictures may be slightly distorted, which

are not a sign of a malfunction.

• Although pictures may stop for a moment, this is not a malfunction.

Audio or subtitle language • The selected language is not available for audio or subtitles on the

does not match the set up DVD.

This is not a malfunction.

The camera angle cannot be • The DVD does not contain sequences recorded from different camera

changed angles. This is not a malfunction.

Audio or subtitle language cannot • The DVD does not contain audio source or subtitles in the selected

be changed language. This is not a malfunction.

“Prohibited icon” appears on the • That operation is prohibited by the unit or the disc.

screen, prohibiting an operation This is not a malfunction.

CD sound dropout • Scratched disc. Replace the disc with an unscratched one.

No CD reproduction

DVD picture dropout

DVD picture freeze

DVD picture in mosaic

No DVD reproduction

–

––

–

CABINET CLEANING

•

Wipe the front panel and other exterior surfaces of

the unit with a soft cloth immersed in lukewarm

water and wrung dry.

•

Never use a solvent or alcohol. Do not spray insec-

ticide liquid near the unit. Such chemicals may

cause damage and discoloration to the exposed sur-

faces.

SERVICING

•

Should your unit become inoperative, do not try to

correct the problem by yourself. There are no user-

serviceable parts inside. Turn off, unplug the power

cord and please call our help line at 1-800-256-

2487 to locate an Authorized Service Center.

IF THE LASER OPTICAL PICKUP UNIT IS DIRTY

•

If the player still does not perform properly when it is operated while referring to the relevant sections and to

“TROUBLESHOOTING GUIDE” in this Owner’s Manual, the laser optical pickup unit may be dirty.

Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup

unit.

DISC HANDLING

•

To clean-off, use a soft cloth.

•

Do not use a hard cloth since this will mar the disc.

•

Wipe the disc in a straight line from center to edge.

•

Never wipe with a circular motion.

•

Do not use detergent or abrasive cleaning agents.

MAINTENANCE

•

Handle the discs so that fingerprints and dust do

not adhere to the surfaces of the discs.

•

Always store the disc in its protective case when it

is not used.

–

––

–

CRT : 9 inch in-line gun,

90˚ deflection tube

Television system: NTSC-M

TV Standard

Channel coverage:

VHF: 2 ~ 13

UHF: 14 ~ 69

CATV: 2 ~13, A ~ W,

W+1 ~ W+84,

A-5 ~ A-1, 5A

Tuning System: 181 channel

frequency synthesized

tuning system

Channel access: Direct access keyboard,

programmable

scan and up/down

Discs: DVD video, Audio CD

Output signal format: NTSC color

•

Designs and specifications are subject to change without notice.

•

If there is a discrepancy between languages, the default language will be English.

DVD

GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS

Sound output: 2 speakers, 1W, 8 ohm

OTHER SPECIFICATIONS

Terminals

Antenna input: VHF/UHF/CATV

75 ohm unbalanced (F-type)

Video input: RCA connector [ 1

Audio L/R input: RCA connector [ 2

Headphone: 1/8" stereo (3.5 mm)

Coaxial digital

audio output

(only DVD): One pin jack,

500m Vpp (75 ohm)

Remote control: Digital encoded

infrared light system

Operating

temperature: 5°C to 40°C

(41°F~104°F)

Power requirement : AC 120V/60Hz

DC 13.2V

Power consumption : AC 55W / DC 60W

(Maximum)

Dimensions: H:12-1/4" (311mm)

W:10-7/8" (276mm)

D:12-1/2" (318mm)

Weight: 17.6 lbs. (8.0 kg)

SPECIFICATIONS

–

INDICE

■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 33

PANEL FRONTAL DE LA UNIDAD . . . . . . . . . . . . . . . 33

MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 33

VISTA POSTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 34

■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 34

CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 34

LA ANTENA INTERIOR . . . . . . . . . . . . . . . . . . . . . . . . 35

CONEXIÓN A TOMAS DE ENTRADA EXTERNA. . . . 35

CONEXIÓN MOVIL. . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

CONEXIÓN A UN AMPLIFICADOR ESTÉREO

EQUIPADO CON TOMAS DE ENTRADA DIGITAL

(Para DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

CONEXCIÓN A UN DECODIFICADOR DOLBY

DIGITAL (Para DVD)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

SECCIÓN DE TV

■ FUNCIONES Y AJUSTES DE TV . . . . . . . . . . . . . . . . . 37

AJUSTES PARA LA PRIMERA VEZ . . . . . . . . . . . . . . . 37

MIRANDO UN PROGRAMA DE TV. . . . . . . . . . . . . . . 37

SECCIÓN DE DVD

■ REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . 38

REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . . . . . . 38

MENÚ DE DISCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

REANUDACIÓN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

CONTROLES DE

OPERACIÓN Y FUNCIONES

PANEL FRONTAL DE

LA UNIDAD

Consulte la figura 1 de la página 8

MANDO A DISTANCIA

Consulte la figura 2 de la página 8

VISTA POSTERIOR

Consulte la figura 3 de la página 8

1. Bandeja de carga del disco

2. Toma de entrada VIDEO

Conecte aquí la toma de salida de vídeo de una

videocámara o de una videograbadora.

3. Tomas de entrada AUDIO L/R

Conecte aquí las tomas de salida de audio de una

videocámara o de una videograbadora.

4. Botón POWER

Presione para encender y apagar la unidad.

5. Botones VOLUME (VOL.) K / L

Presione para controlar el nivel del volumen para el

DVD y el televisor.

6. Botones CHANNEL (CH.) K / L

Presione para seleccionar el canal memorizado.

Presione para cambiar a un modo de televisor

cuando esta en el modo de DVD.

7. Ventanilla del sensor del mando a distancia

8. Botón

C STOP

Detiene la operación del disco.

9. Botón H SKIP

Reproduce desde el inicio del capítulo o canción actual.

Botón h SEARCH (panel frontal)

Durante la reproducción o en el modo de pausa,

mantenga presionado el botón durante unos segundos

para cambiar la velocidad de reproducción hacia atrás.

10. Botón B PLAY

Inicia la reproducción del contenido del disco.

Presione para cambiar a un modo de DVD cuando

esta en el modo de televisor.

11. Botón SKIP G

Reproduce desde el inicio del siguiente capítulo o

canción.

Botón SEARCH g

(panel

frontal)

Durante la reproducción o en el modo de pausa,

mantenga presionado el botón durante unos segundos

para cambiar la velocidad de reproducción en avance.

12. Botón F PAUSE

Hace una pausa en la operación del disco.

13. Botón A OPEN/CLOSE

Presione para insertar un disco en la bandeja o

retirarlo de ella.

14. Toma HEADPHONE

Para conectar auriculares (no suministrados) y

escuchar en privado.

15. Botón MODE

Activa el modo de reproducción programada o el

modo de reproducción aleatoria cuand se reproducen

CDs.

16. Botones numérios

Modo del televisor:

Presione dos dígitos para tener acceso directamente

al canal deseado.

Recuerde presionar [0] antes de elegir un canal de

un solo dígito.

Botón +100

Presione para seleccionar canales de televisión por

cable cuyo número sea superior a 99.

Modo DVD:

Presione para introducir el número deseado.

Botón +10

Presione para introducir números superiors a 9.

17. Botón SLEEP

Ajusta el temporizador de dormir.

18. Botón REV h

Presione para volver rápidamente en el disco.

Presione [PAUSE

] y presione este botón para

empezar la reproducción en cámara lenta. Presione

repetidamente este botón para cambiar la velocidad de

retroceso de la cámara lenta.

Botón FWD g

Presione para avanzar rápidamente en el disco.

Presione [PAUSE k] y presione este botón para

empezar la reproducción en cámara lenta. Presione

repetidamente este botón para cambiar la velocidad

de avance de la cámara lenta.

19. Botón V.SURR (envolvente virtual)

Presione para activar/desactivar el envolvente

virtual.

20. Botón SETUP

Presione para entrar o salir del menú de

configuración de televisor o DVD.

21. Botón TITLE

Visualiza el menú de títulos.

–

22. Botón CLEAR

Para cancelar o borrar un ajuste entrado

actualmente.

23. Botón DISPLAY

Modo del televisor:

Presione para visualizar el número del canal en la

pantalla. Si presiona de nuevo, el número del canal

desaparecerá.

Modo de DVD:

Visualiza el estado actual en la pantalla del

televisor.

24. Botón SEARCH MODE

Presione para localizar un punto deseado.

25. Botón AUDIO

Presione para seleccionar un idioma de audio o un

modo de sonido deseado.

26. Botón SUBTITLE

Presione para seleccionar un idioma de subtítulos

deseado.

27. Botón REPEAT

Repite la reproducción del disco, título, capítulo o

pista actual.

28. Botón ANGLE

Presione para cambiar el ángulo de la cámara y ver,

desde un ángulo diferente, la secuencia que está

siendo reproducida (si existe).

29. Botón A-B

Repite la reproducción de una sección seleccionada.

30. Botón RETURN

Permite volver a la pantalla anterior en el modo de

configuración.

31. Botón ENTER

Presione para establecer un ajuste.

32. Botones K / L / { / B

Modo de televisor:

Presione para seleccionar un modo de ajuste desde

el menú que aparece en la pantalla del televisor.

Presione para seleccionar o ajustar desde un menú

particular.

Modo de DVD:

Presione para seleccionar un ítem de menú.

33. Botón DISC MENU

Muestra menú del DVD.

34. Botón SELECT

Presione para cambiar a un modo de televisor,

modo de entrada externa o modo de DVD.

35. Botón MUTE

Suprime la salida de sonido. (La visualización del

nivel del sonido cambia de ROJO CLARO a AZUL

CLARO.) Presione este botón de nuevo o

[VOL.

] para restaurar el sonido.

36. Botón PICTURE

Presione para entrar en el modo de ajuste de imagen.

37. Cable de alimentación

Conéctelo a una toma de CA convencional (120

V/60 Hz).

38. Toma COAXIAL (DVD Audio solamente)

Conecte a la entrada digital de un amplificador o

decodificador externo.

NOTA: Cuando seleccione el modo DVD con este

botón, Presione primero [PLAY

] u

[OPEN/CLOSE

]. De lo contrario, las funciones

del DVD no se activarán.

39. Toma ANT.

Conecte a una antena, sistema de televisión por

cable o sistema de satélite.

40. Toma DC 13,2V

Conecte en el cable de batería del coche.

PREPARACIÓN PARA LA

UTILIZACIÓN

Nota para el instalador de sistemas CATV

Esta nota tiene la finalidad de llamar la atención del

instalador de sistemas CATV para que tenga en

cuenta el Artículo 820-40 del NEC, el cual

proporciona consejos para hacer una conexión a

tierra apropiada y, en particular, especifica que la

tierra del cable deberá estar conectada al sistema de

puesta a tierra del edificio, tan cerca del punto de

entrada del cable como sea posible.

NOTA:

Antes de enchufar la antena a la toma ANT. de la

unidad, compruebe que la clavija no esté doblada.

Si esta doblada, póngala derecha como se muestra

en la ilustración, y luego conéctela en la toma ANT.

de la unidad.

1) Abra la cubierta del compartimiento de las pilas

empujando la cubierta del mando a distancia en el

sentido de la flecha.

2) Inserte 2 pilas “AA” en el

compartimiento de las

pilas, en el sentido

indicado por las marcas de polaridad (+/-).

3) Vuelva a poner la cubierta.

[PRECAUCIONES DE LA PILA]

•

Asegúrese de respetar la polaridad correcta tal

como se indica en el compartimiento de pilas. Si

las pilas están invertidas puede provocar daños en

el equipo.

•

No mezcle distintos tipos de pilas al mismo tiempo

(por ejemplo, pilas alcalinas y de carbón cinc) o

pilas nuevas y viejas.

•

Si el equipo no se utiliza durante mucho tiempo,

saque las pilas para evitar daños o heridas de una

posible fuga de pilas.

•

No trate de recargar pilas no diseñadas para recar-

ga; pueden calentarse excesivamente y romperse.

PARA INSERTAR LAS PILAS

CONEXIONES DE

ANTENA/CABLE

Clavija doblada

Cable

Clavija

(Necesita enderezarse) (Clavija derecha)

Consulte la figura 4 de la página 10

NOTA:

Retire el cable de alimentación del

gancho para evitar romperlo antes de conectarlo a

una toma de CA convencional.

–

ANTENA COMBINADA DE VHF/UHF

La antena combinada de VHF/UHF de 75 ohmios

puede conectarse a la toma ANT.

ANTENA SEPARADAS DE VHF/UHF

En algunas zonas será necesario utilizar una antena

exterior.

TELEVISION POR CABLE SIN CAJA DE

CONVERTIDOR / DECODIFICADOR

Utilice esta conexión si su sistema de televisión por

cable se conecta directamente a su unidad sin una

caja de convertidor. Utilice el mando a distancia de la

unidad para seleccionar los canales.

TELEVISION POR CABLE CON CAJA

DE CONVERTIDOR/DECODIFICADOR

O CAJA DE SATÉLITE

Si su empresa de televisión por cable le suministra

una caja de convertidor, o si usted utiliza un sistema

de satélite, podrá utilizar la conexión básica mostrada

aquí.

La selección de los canales deberá hacerse con la caja

de convertidor o con la caja de satélite. Esto significa

que los canales no se podrán cambiar utilizando el

mando a distancia de la unidad.

La antena interior (suministrada) es desmontable.

Inserte el vástago de la antena en el orificio de la

parte posterior superior de la unidad. Conecte la

antena interior a la unidad. Para obtener la mejor

recepción, extienda completamente la antena interior

y luego haga los ajustes necesarios. (Evite tocar la

sección superior cuando haga los ajustes.)

NOTA:

• La conexión de una antena interior puede no dar

siempre una recepción de TV aceptable.

LA ANTENA INTERIOR

Consulte la figura 5 de la página 10

CONEXIÓN MOVIL

ADVERTENCIA: El conductor nunca debe

mirar la unidad mientras conduce un

vehículo.

PRECAUCION:

•

Cuando se utiliza en un vehículo en

movimiento, cerciórese que la unidad está

asegurada en todo momento para evitar que

sufra heridas. Consulte con un instalador

profesional.

•

Si utiliza la unidad con el motor del vehículo

parado, vuelva a cargar la batería del

vehículo después de unas 4 horas de uso

para evitar que se agote. Después de

terminar de utilizar la unidad cerciórese de

desenchufar el cable de batería de coche de

la toma del encendedor de cigarrillos.

•

No utilice esta unidad durante la conducción.

•

No deje la unidad en un coche.

•

Esta unidad no fue diseñado para utilizar en

un coche.

1) La antena interior entregada es adecuada cuando

el vehículo está estacionado. Para una mejor

recepción en la calle o carretera, utilice una antena

de TV móvil de VHF/UHF de alta calidad.

2) Enchufe el cable de batería de coche en el conec-

tor DC13,2 V (12V) en la parte trasera de la

unidad.

DC 13.2V

COAXIAL

ANT.

DC13.2V

ANT.

Antena móvil con

combinación de

VHF/UHF (no entregada)

Para la toma del encendedor

de cigarrillos del vehículo.

Cable de batería

de coche

(entregado)

Cuando vea un programa grabado en otra fuente

(videograbadora o videocámara), utilice las tomas de

entrada de audio/vídeo de la parte delantera de la

unidad.

Conecte las tomas de salida de audio/vídeo de otra

fuente a las tomas AUDIO L/R y VIDEO de esta

unidad.

Después presione [SELECT] hasta que aparezca

"AUX" en la pantalla.

CONEXIÓN A TOMAS DE

ENTRADA EXTERNA

NOTA:

•

Para su seguridad y para evitar que se dañe

la unidad, desenchufe el cable de antena de la

toma ANT. antes de mover la unidad.

NOTA:

•

Cuando conecte una videograbadora monofónica

(otra fuente) a esta unidad, conecte la toma de

salida de audio de la videograbadora monofónica

(otra fuente) a la toma AUDIO L de esta unidad. El

audio saldrá igualmente por los canales izquierdo y

derecho.

Consulte la figura 6 de la página 11

–

NOTAS:

•

Cerciórese que su vehículo tiene un sistema eléctri-

co con tierra negativa de 13,2 voltios (12 voltios).

•

Cerciórese de utilizar sólo el cable de batería de

coche entregado. El uso de otros cables puede

dañar la unidad.

•

Cerciórese que la toma está limpia de cenizas y

otros restos.

•

Cerciórese de enchufar firmemente el cable de

batería de coche en la toma del encendedor de ciga-

rrillos.

•

Desenchufe siempre la batería del coche de la toma

del encendedor de cigarrillos antes de desenchufar-

lo de la unidad.

•

Debe desconectar el cable de batería de coche de la

unidad antes de poder utilizar la electricidad de CA.

•

Cerciórese de cambiar el fusible sólo por uno del

mismo tipo, 6A, 250V.

Utilice un cable digital coaxial de audio (disponible en

el comercio) para hacer las conexiones de audio.

Conecte a un amplificador equipado con tomas de

entrada digital como platina MD o DAT.

NOTAS:

•

La fuente de audio de un disco en un formato de

sonido envolvente Dolby Digital de 5,1 canales no

se puede grabar como sonido digital mediante una

platina MD o DAT.

•

Asegúrese de apagar todos los componentes del

sistema antes de conector otro componente.

•

Consulte los manuales del propietario de los

componentes que va a conectar a la unidad.

•

Ponga DOLBY DIGITAL en “APDO.” para la

salida de audio en el modo de preparación. La

reproducción en una unidad utilizando ajustes

incorrectos puede provocar distorsión por ruido, y

también se pueden dañar los altavoces.

Consulte la figura 7 de la página 12

CONEXIÓN A UN

AMPLIFICADOR ESTÉREO

EQUIPADO CON TOMAS DE

ENTRADA DIGITAL (Para DVD)

Si utiliza esta unidad para reproducir un disco DVD

en un formato de sonido envolvente Dolby Digital de

5,1 canales, la unidad dará salida a un flujo de datos

DOLBY DIGITAL desde su toma COAXIAL. Si

conecta la unidad a un decodificador Dolby Digital,

podrá disfrutar de una tonalidad más convincente y

real, con un sonido envolvente potente y de alta

calidad similar al de los cines.

Utilice cables digitales coaxiales de audio

(disponibles en el comercio) para hacer las

conexiones de audio.

NOTAS:

•

Asegúrese de apagar todos los componentes del

sistema antes de conector otro componente.

•

Consulte los manuales del propietario de los

componentes que vaya a conectar a la unidad.

•

Si conecta un decodificador Dolby Digital, ponga

DOLBY DIGITAL en “ENC.” para la salida de

audio en el modo de preparación.

•

A menos que se haga la conexión a un

decodificador Dolby Digital, ponga DOLBY

DIGITAL en “APDO.” para la salida de audio en el

modo de preparación. La reproducción en la unidad

utilizando ajustes incorrectos puede generar

distorsión de ruido, y también puede estropear los

altavoces.

Consulte la figura 8 de la página 13

CONEXCIÓN A UN

DECODIFICADOR DOLBY

DIGITAL (Para DVD)

Fabricado bajo licencia de Dolby

Laboratories. “Dolby” y el símbolo de la D

doble son marcas de fábrica de Dolby

Laboratories.

1 Enchufe el cable eléctrico

Enchufe el cable de alimentación de la unidad en una

toma de CA.

NOTA:

• Si aparecen algunos dígitos en la esquina de la

pantalla, presione [POWER] sin desenchufar el

cable de la alimentación.

2 Encienda la unidad

Presione [POWER] para encender la unidad.

3 Seleccione el idioma de la pantalla

Presione [K / L] para apuntar a “LANGUAGE”.

Luego, Presione [ENTER] para seleccionar

“ENGLISH” = inglés o “ESP” = español o “FRA” =

francés. “[ ]” indica el idioma seleccionado.

4 Inicie el preajuste automático

Presione [K / L] para apuntar a

“AUTOPRESELECCION”. Luego, presione

[ENTER]. El sintonizador explora y memoriza todos

los canales activos de su zona.

NOTAS:

• La unidad distingue entre los canales de TV

estándar y los canales de televisión por cable

(CATV).

• La unidad puede memorizar canales de TV como

canales de CATV si las condiciones de la recepción

no son buenas. Si pasa esto, vuelve a intentar la

acción “AUTOPRESELECCION” cuando las

condiciones de la recepción sean mejores.

5 Tras la exploración

El sintonizador se detiene en el canal memorizado más

bajo. Puede seleccionar el canal deseado directamente

con los botones numéricos o [CH. K / L].

NOTA:

•

NO es necesaria la programación de memoria de

canal cuando se conecta a una caja de cable o caja

de satélite. Sólo seleccione el selector de canal de

la unidad al canal de salida de la caja de cable o

caja de satélite (por ejemplo, CH3) y seleccione el

canal a ver en la caja de cable o caja de satélite.

AJUSTES PARA LA PRIMERA VEZ

–

SECCIÓN DE TV

FUNCIONES Y AJUSTES

DE TV

MIRANDO UN PROGRAMA DE TV

1 Encienda la unidad

Presione

[POWER]

para encender la unidad.

2 Seleccione el número de canal

Presione [CH. K / L] para seleccionar su número de

canal o presione los botones numéricos.

Nota para el uso de los botones numéricos:

¡Cuando seleccione los canales de cable que sean

más altos que 99, presione primero [+100] y pre-

sione las últimas dos cifras. (Ejemplo: para selec-

cionar el canal 125, primero presione [+100] y

después presione [2] y [5]).

¡Debe colocar un cero antes de los números de

canal de una cifra. (Por ejemplo: 02, 03, 04, etc.)

3 Ajuste el sonido

Presione [VOL. X / Y] para ajustar el volumen.

Presione

[MUTE] para silenciar inmediatamente el

sonido.

Vuelva a pulsar nuevamente para recuperar el nivel

de sonido anterior.

NOTA:

•

Si presiona [CH.

] en el

modo DVD, puede cambiar los

canales de TV.

Incluso si apaga la unidad en el

modo DVD, cuando vuelve a

encender, volverá al modo de TV.

VOLUMEN 20

C C C C C C C C C C C C C C C C

PARA VER CANALES DE CABLE O

SATELITE

•

Si la unidad está conectada a una caja de cable o

caja de satélite, presione [CH. K / L] para selec-

cionar CH3 o CH4 de acuerdo con el ajuste de

canal de salida del equipo y seleccione el canal

deseado en ese equipo.

PARA VER LA ENTRADA EXTERNA

•

Cuando hay un equipo conectado a las tomas de

entrada AUDIO/VIDEO delanteras, presione repeti-

damente [SELECT] o [CH. K / L] hasta que

aparezca “AUX” en la pantalla.

–

REPRODUCCIÓN BÁSICA

Para empezar

¡Conecte el interruptor del amplificador y otros

equipos, si fuera necesario.

1 Presione [POWER].

¡La alimentación se conectará.

2 Presione [OPEN/CLOSE A].

¡La bandeja de carga del disco se abrirá.

3 Ponga el dlsco en la bandeja con el lado de

la eliguta hacia arriba.

4 Presione [PLAY O].

¡La bandeja se cerrará automáticamente y la repro-

ducción comenzará desde el primer capítulo o pista

del disco.

¡La reproducción también empieza cerrando man-

ualmente la bandeja del disco o presionando

[OPEN/CLOSE A].

¡Si la reproducción no comienza automáticamente,

presione [PLAY O].

¡Cuando reproduzca un DVD que tenga grabado un

menú de títulos, el menú podrá aparecer en la

pantalla.

5 Presione [STOP C]

para detener

la reproducción.

CDDVD-V

SECCIÓN DE DVD

REPRODUCCIÓN DE UN

DISCO

MENÚ DE DISCO

1 Presione [DISC MENU].

¡Aparecerá el menú principal de DVD.

2 Si no existe la función, puede aparecer el

símbolo en la pantalla de TV.

3 Si existe un menú de disco en el disco, el

idioma de audio, opciones de subtítulos,

capítulos para el título y otras opciones

aparecerán para su selección.

4 Presione [K / L / s / B] para seleccionar un

ítem y presione [ENTER] para confirmar la

selección.

DVD-V

1 Durante la reproducción, presione

[STOP

C].

¡Aparecerá el mensaje de continuación en la pantalla

de TV.

2 Presione [PLAY O], la reproducción contin-

uará desde el punto en el que se paró la

reproducción.

¡Para cancelar la continuación, presione dos veces

[STOP C].

¡Si se apaga la unidad, se cancelará la función de con-

tinuación.

DVD-V

NOTAS:

¡Cuando se cambió el modo de DVD al modo de

TV, el modo de DVD se desactiva primero y

aparece la imagen y sonido de TV después de unos

4 segundos. De la misma forma, cuando se pulsa

[POWER] para apagar en el modo de DVD, este

modo se desactiva primero y después se apaga la

electricidad.

¡Puede aparecer un “icono

prohibitivo” en la esquina superi-

or derecha de la pantalla de TV

durante el funcionamiento,

avisándole que hubo una

operación prohibida en el DVD o el disco.

¡Con los DVD que utilizan títulos para las señales

de programa de reproducción, la reproducción

puede empezar del segundo título o puede saltar

estos títulos.

¡Durante la reproducción de un disco de dos capas,

las imágenes pueden parar durante un momento.

Esto se produce cuando la 1º capa cambia a la 2º

capa. Esto no es una avería.

REANUDACIÓN

–

MEMO

Printed in Malaysia 1EMN20217

TD300UA ★★★★★

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workman-

ship as follows:

DURATION:

PARTS:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the

date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this

warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date

of original retail purchase.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail

purchase will be required together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing

or if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does

not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It

does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not

supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,

alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this

product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF

FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS

REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE

PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN

THE UNIT IS CARRIED-IN TO A FUNAI AUTHORIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI

CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT

WITHOUT PRIOR NOTICE.

To locate your nearest FUNAI Authorized Service Center or for general service procedure, please

call or write to the following:

FUNAI CORPORATION, INC.

SERVICE CENTER

19900 Van Ness Avenue, Torrance, CA 90501

Tel :1-800-256-2487

http://www.EmersonAudioVideo.com

Head Office: 100 North Street, Teterboro, NJ 07608

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

SV2000 6520FDF Manual de usuario

Marca: SV2000

Modelo: 6520FDF

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Descargar PDF

informe

en otros idiomas

English: SV2000 6520FDF User manual

SV2000 6520FDF Manual de usuario

SV2000 6520FDF Manual de usuario

en otros idiomas

Artículos relacionados

Otros documentos