Panasonic PV24DF62 Instrucciones de operación

Please read these instructions carefully before attempting to connect,

operate, or adjust this product. Please save this manual.

Spanish Quick Use Guide is included.

(Guía para rápida consulta en español está incluida.)

LSQT0501A

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

TV

/

DVD

Combination

Operating Instructions

Model No. PV-24DF62

As an ENERGY STAR

®

Partner, Matsushita Electric Corporation of America has

determined that this product or product model meets the ENERGY STAR

®

guidelines for energy efficiency.

• Initial Setup and Connection Procedures are on pages 10 to 11.

TV Operation

Advanced Operation

Basic Operation

For Your Information

Initial Setup

LSQT0501_01p15.p65 10/29/2001, 12:37 PM1

2

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

USING THE UNIT

Before unit is brought out of storage or moved to a new location,

refer again to the INSTALLATION section of these safeguards.

1 KEEP UNIT WELL AWAY FROM WATER OR

MOISTURE, such as vases, sinks, tubs, etc.

2 IF EXPOSED TO RAIN, MOISTURE, OR

STRONG IMPACT, unplug unit and have it inspected by

a qualified service technician before use.

3 ELECTRICAL STORMS

During a lightning storm, or before leaving unit unused for

extended periods of time, disconnect all equipment from the

power source as well as the antenna and cable system.

4 WHEN UNIT IS PLUGGED IN

• DO NOT OPERATE IF:

- liquid has spilled into unit.

- unit was dropped or otherwise damaged.

- unit emits smoke, malodors, or noises.

Immediately unplug unit, and have it inspected by a service

technician to avoid potential fire and shock hazards.

• Never drop or push any object through openings in unit.

Touching internal parts may cause electric shock or fire hazard.

• Keep magnetic objects, such as speakers, away from unit

to avoid electrical interference.

5 USING ACCESSORIES

Use only accessories recommended by the manufacturer to

avoid risk of fire, shock, or other hazards.

6 CLEANING UNIT

Unplug unit. Use a clean, dry, chemically untreated cloth to gently

remove dust or debris. DO NOT USE cleaning fluids, aerosols, or

forced air that could over-spray, or seep into unit and cause

electrical shock. Any substance, such as wax, adhesive tape,

etc. may mar the cabinet surface. Exposure to greasy, humid, or

dusty areas may adversely affect internal parts.

SERVICE

1 DO NOT SERVICE PRODUCT YOURSELF

If, after carefully following detailed operating instructions, the

unit does not operate properly, do not attempt to open or

remove covers, or make any adjustments not described in the

manual. Unplug unit and contact a qualified service technician.

2 REPLACEMENT OF PARTS

Make sure the service technician uses only parts specified

by the manufacturer, or have equal safety characteristics

as original parts. The use of unauthorized substitutes may

result in fire, electric shock, or other hazards.

3 SAFETY CHECK AFTER SERVICING

After unit is serviced or repaired, request that a through safety

check be done as described in the manufacturer’s service

literature to insure video unit is in safe operating condition.

OUTDOOR ANTENNA INSTALLATION

1 SAFE ANTENNA AND CABLE CONNECTION

An outside antenna or cable system must be properly

grounded to provide some protection

against built up static charges

and voltage. Section 810 of

the National Electrical Code,

ANSI/NFPA 70 (in Canada,

part 1 of the Canadian

Electrical Code) provides

information regarding proper

grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna discharge unit,

connection to grounding electrodes, and requirements for

the grounding electrode.

2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE

POWER LINES OR CIRCUITS

Locate an outside antenna system well away from power

lines and electric light or power circuits so it will never

touch these power sources should it ever fall. When

installing antenna, absolutely never touch power lines,

circuits or other power sources as this could be fatal.

GROUND

CLAMP

ELECTRIC

SERVICE

EQUIPMENT

ANTENNA LEAD

IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE

GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC - NATIONAL

ELECTRICAL CODE

INSTALLATION

1 POWER SOURCE CAUTION

Operate only from power source indicated on unit

or in this manual. If uncertain, have your Electric

Utility Service Company or Video Products Dealer

verify your home power source.

2 POWER CORD PLUG

For safety, this unit has a polarized type plug (one

wide blade), or a three-wire grounding type plug.

Always hold the plug firmly and make sure your hands

are dry when plugging in or unplugging the AC power

cord. Regularly remove dust, dirt, etc. on the plug.

POLARIZED PLUG CAUTION:

The plug fits into outlet one way. If it cannot be fully

inserted, try reversing it. If it still will not fit, have an

electrician install the proper wall outlet. Do not tamper

with the plug.

GROUNDING PLUG CAUTION:

The plug requires a three-hole grounding outlet.

If necessary, have an electrician install the proper

outlet. Do not tamper with the plug.

3 POWER CORD

To avoid unit malfunction, and to protect against

electrical shock, fire or personal injury:

-Keep power cord away from heating appliances

and walking traffic. Do not rest heavy objects on,

or roll such objects over the power cord.

-Do not tamper with the cord in any way.

-An extension cord should have the same type

plug (polarized or grounding) and must be

securely connected.

-Overloaded wall outlets or extension cords is a

fire hazard.

-Frayed cords, damaged plugs, and damaged or

cracked wire insulation are hazardous and should

be replaced by a qualified electrician.

4 DO NOT BLOCK VENTILATION HOLES

Ventilation openings in the cabinet release heat

generated during operation. If blocked, heat

build-up may result in a fire hazard or heat damage

to cassettes.

For your protection:

a.Never cover ventilation slots while unit is ON, or

operate unit while placed on a bed, sofa, rug, or

other soft surface.

b.Avoid built-in installation, such as a book case

or rack, unless properly ventilated.

5

AVOID EXTREMELY HOT LOCATIONS

OR SUDDEN TEMPERATURE CHANGES

Do not place unit over or near a heater or radiator,

in direct sunlight, inside closed vehicles, in high

temperature [over 95°F (35°C)], or in over 75%

humidity. If unit is suddenly moved from a cold

place to a warm one, moisture may condense in unit

and on the tape causing damage. Never subject unit

to vibration, impact, or place it so that the surface

is tilted as internal parts may be seriously damaged.

6 TO AVOID PERSONAL INJURY

• Never place unit on support or stand

that is not firm, level, and adequately

strong. The unit could fall causing

serious injury to a child or

adult and damage to the unit.

• Move any appliance and cart

combination with care. Quick

stops, excessive force, and uneven

surfaces may cause objects to overturn.

• Carefully follow all operating instructions.

READ AND RETAIN ALL SAFETY AND

OPERATING INSTRUCTIONS. HEED ALL

WARNINGS IN THE MANUAL AND ON UNIT

Important Safeguards and Precautions

LSQT0501_01p15.p65 10/16/2001, 1:24 PM2

3

Safety Precautions/Mesures de sécurité

Warning : To prevent fire or shock hazard, do not expose this equipment to rain or moisture.

Caution : To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Avertissement : Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas

exposer cet appareil à la pluie ou à une humidité excessive.

Attention : Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la

borne correspondante de la prise et pousser jusqu’au fond.

FCC WARNING :Any unauthorized changes or modifications to this equipment

would void the user’s authority to operate.

ATTENTION:

RAYONNEMENT LASER

EN CAS D’OUVERTURE.

NE PAS REGARDER

DANS LE FAISCEAU.

CAUTION:

UNIT IS A CLASS I LASER PRODUCT.

HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD

CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE

SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.

WHEN THIS UNIT IS PLUGGED TO THE WALL OUTLET, DO NOT

PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY

AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT ATTEMPT TO REPAIR THE

UNIT YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION:

LASER RADIATION

WHEN OPEN. DO NOT

STARE INTO BEAM.

(Inside of product)

FCC NOTICE:

This equipment has been tested and found to comply with part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when operated in a residential

environment. If this eqiupment does cause interference to radio or television reception, which can be

determined by turning the equipment off and on, use the equipment in another location and/or utilize an

electrical outlet different from that used by the receiver. If necessary, consult the dealer or an

experienced radio/TV technician for help. You may find the booklet, 'Something About Interference'

available from FCC local regional offices helpful.

This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead.

Disposal of these materials may be regulated in your community due to environmental

considerations. For disposal or recycling information please contact your local authorities, or the

Electronics Industries Alliance: <http://

www.eiae.org.>

Region Management Information

Region Management Information: This unit is designed and

manufactured to respond to the Region Management

Information that is recorded on a DVD disc. If the Region

number described on the DVD disc does not correspond to

the Region number of this unit, this unit cannot play this disc.

The Region number

for this unit is 1.

1

This symbol warns the user that uninsulated voltage within the unit may

have sufficient magnitude to cause electric shock. Therefore, it is

dangerous to make any kind of contact with any inside part of this unit.

This symbol alerts the user that important literature concerning the

operation and maintenance of this unit has been included. Therefore, it

should be read carefully in order to avoid any problems.

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS

INSIDE REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

LSQT0501_01p15.p65 10/16/2001, 1:24 PM3

4

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Before Using

Congratulations

on your purchase of one of the most

sophisticated and reliable products on the

market today. Used properly, it will bring you

and your family years of enjoyment. Please fill

in the information below. The serial number is

on the tag located on the back of your unit.

Date of Purchase

Dealer Purchased From

Dealer Address

Dealer Phone No.

Model No.

Serial No.

Batteries 2 “AA”

Accessories

To order accessories,

call toll free

1-800-332-5368.

Remote Control

LSSQ0321

Loading the Batteries

Battery replacement caution

• Do not mix old and new batteries.

• Do not mix alkaline with manganese batteries.

Features for a Quality Picture

PureFlat

TM

Picture Tube

This unit is equipped with PureFlat

TM

Picture Tube.

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

V

O

L

C

H

C

H

V

O

L

1

0

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

If disc is brought from a cold to a warm

environment, moisture may form on the disc

Wipe away moisture with a soft, dry, lint-free cloth

before using disc. (See above.)

Improper disc storage

Discs could be damaged if stored or left in areas:

• exposed to direct sunlight.

• that are humid or dusty.

• near heat (i.e. heater, radiator, etc.).

Disc tray

Disc

Handling precautions

• Only hold disc by edges as

shown. Fingerprints, dirt,

and scratches can cause

skipping and distortion.

• Do not write on label

side of disc.

• Never use record cleaning

sprays, benzine, thinner,

static electricity

prevention liquids,

or any other solvent.

• Be careful not to drop

or bend disc.

• Do not place more than

1 disc on disc tray.

• Do not try to close disc

tray when disc is not

properly placed.

• Always store discs

in their proper cases

when not in use.

To clean disc surface

With a soft, damp (water only) cloth, gently wipe from

the center hole to the outer edge as shown below.

(Wiping in a circular pattern will scratch the surface.)

Disc Handling

LSQT0501_01p15.p65 10/25/2001, 9:20 AM4

5

Table of Contents

Initial Setup

Important Safeguards and Precautions/Safety Precautions ......... 2 ~ 3

Before Using........................................................................................ 4

Information..................................................................................... 6 ~ 7

Location of Controls ...................................................................... 8 ~ 9

Basic Connections & Initial Setup ............................................... 10, 11

Reset Language, Channels, Clock, Time Zone Adjust............... 12, 13

Audio Connections ...................................................................... 14, 15

TV

TV Operation

TV Operation ..................................................................................... 18

MTS Broadcast/TV Stereo System .................................................... 19

Closed Caption System............................................................... 20, 21

TV Timer Features ............................................................................. 22

On-Screen Displays (OSD) ............................................................... 23

TV

Advanced Operation

Cable Box Universal Remote Control Feature ........................... 24, 25

Special Features ......................................................................... 26, 27

V-Chip Control Feature ............................................................. 27 ~ 29

Audio/Video Menu............................................................................. 30

Audio/Video Adjustment.................................................................... 31

TV

Disc Operation........................................................................... 32 ~ 36

DVD Operation using On-Screen Displays.............................. 37 ~ 39

DVD Lock Feature ............................................................................. 40

DVD

For Your Information

Before Requesting Service ......................................................... 44, 45

Warning and Instruction Displays ..................................................... 45

Servicenter List .................................................................................. 47

Spanish Quick Use Guide/Guía para rápida consulta ............. 48 ~ 53

Index ............................................................................................ 54, 55

Limited Warranty .............................................................................. BC

TV

Settings for DVD Operation ....................................................... 41 ~ 43

Language Code List.......................................................................... 46

DVD

DVD Operation

Basic DVD Operation .................................................................. 16, 17

DVD

TV Operation

Advanced Operation

DVD Operation

For Your Information

Initial Setup

LSQT0501_01p15.p65 10/16/2001, 1:25 PM5

6

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Display

Picture Tube: 24 inch diagonal pure flat Picture Tube

Tuner

Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69

CABLE Channels: Midband A through I (14 ~ 22)

Superband J through W (23 ~ 36)

Hyperband AA ~ EEE (37 ~ 64)

Lowband A-5 ~ A-1 (95 ~ 99)

Special CABLE channel 5A (01)

Ultraband 65 ~ 94, 100 ~ 125

General

Power Source: 120V AC, 60 Hz

Power Consumption:

Power On

Approx. 142 watts

Power Off

Approx. 2.9 watts

Television System: EIA Standard NTSC color

Speaker: 2 pieces (5.0W x 2)

Operating Temperature: 5

°

C ~ 35

°

C (41

°

F ~ 95

°

F)

Operating Humidity: 10 % ~ 75%

Weight: 38.1 kg (84 lbs.)

Dimensions: 596 (W) x 568 (H) x 504 (D) mm

23-1/2” (W) x 22-3/8” (H) x 19-7/8” (D)

Discs played

(1) DVD-VIDEO disc 5” (12 cm) single-sided, single-layer

5” (12 cm) single-sided, double-layer

5” (12 cm) double-sided, double-layer

(one layer per side)

3” (8 cm) single-sided, single-layer

3” (8 cm) single-sided, double-layer

3” (8 cm) double-sided, double-layer

(one layer per side)

(2) Compact disc 5” (12 cm) disc

(CD-DA, VIDEO CD) 3” (8 cm) disc

Digital audio output:

Optical digital output: Optical connector

Pickup: Wave length:

655 nm (DVD)

790 nm (Video CD/CD)

Laser power: CLASS II

Note :Designs and specifications are subject to change without notice.

Specifications

Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and

4,819,098, licensed for limited viewing uses only.

This product incorporates copyright protection technology that is

protected by method claims of certain U.S. Patents and other intellectual

property rights owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology must be authorized

by Macrovision Corporation, and is intended for home and other limited

viewing uses only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is prohibited.

Information

LSQT0501_01p15.p65 10/10/2001, 11:55 AM6

7

Angle

Some DVD discs feature scenes simultaneously

shot from different angles. The ANGLE button can

be used to view the scene from different angles.

(ANGLE Indicator lights up on the unit when a

scene recorded at different angles is detected.)

Chapter Number

Titles are subdivided into numbered sections. You

can quickly search for a favorite scene using these

numbers.

DVD

A high-density optical disc on which high-

qualitypictures and sound have been digitally

recorded. DVD incorporates new video compression

technology (MPEG II) and high-density recording

technology which allow entire movies to be recorded

with incredible playback quality.

Playback Control

With Video CD (version 2.0), scenes or information

may be selected for

viewing or listening from an interactive menu that

appears on the TV screen.

Subtitles

Written dialogue which appears at the bottom of the

screen.

Time Number

The elapsed play time from the start of a disc or

title. Use to quickly find scenes. (May not work with

some discs.)

Title Number

For DVD discs with two or more titles, the title is

numbered as title 1, title 2, etc.

Track Number

Numbers assigned to tracks on Video CDs and

CDs to allow specific tracks to be quickly located.

Video CD

CD containing picture and sound with same quality

level as video tape. This unit also supports Video

CDs with playback control (version 2.0).

Disc formats supported by this unit

The unit can play back discs bearing any of

the following marks:

Discs which cannot be played with

this unit

• DVD with Region No. other than “1” or “ALL”

• DVD of PAL system

• DVD-ROM

• DVD-R/DVD-RAM

• CDV

• CD-G

• Do not try to play a Photo CD.

DVD

3” (8 cm) disc / 5” (12 cm) disc

Video CD

3” (8 cm) disc / 5” (12 cm) disc

CD

3” (8 cm) disc / 5” (12 cm) disc

is a registered trademark.

Definition of Terms

If the disc cannot be removed...

First, unplug unit.

Then, prepare a rigid wire (e.g. an

extended paper clip) and, applying

moderate force, insert it straight into the

hole at the base of the tray. The tray will

eject a little. Then, pull the tray all the way

out and remove the disc.

LSQT0501_01p15.p65 10/25/2001, 9:36 AM7

8

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

V

O

L

C

H

C

H

V

O

L

1

0

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

Remote Control Buttons (Light Tower™ Illuminated Remote Control)

• When LIGHT is pressed, (TV, DVD, DSS/CABLE, CH UP/DOWN, VOL+/-) buttons will light for 5 seconds

for easy location. If no button is pressed in 5 seconds the light goes out to conserve the battery.

DVD

Sets to DVD mode.

LIGHT

See below.

DSS/CABLE

Sets the remote to control some

basic DDS or Cable box functions.

TIMER

Sets ON TIMER or SLEEP TIMER.

VOLUME UP/DOWN

Adjusts volume.

RAPID TUNE

Displays the last channel

you were watching.

ADD/DELETE/CLEAR

Adds or deletes a channel.

Cancels an item on the screen.

SUB TITLE

Selects a different subtitle language.

DISPLAY/ENTER

Displays the TV status and clock.

In DVD mode, displays disc and

unit information.

In DSS or CABLE mode, it may be

necessary after channel selection.

MENU

Displays DVD menu.

RETURN

Returns to Menu screen.

SKIP I

Skips one chapter or track.

Goes to next menu screen.

ZOOM

Enlarges specific portions of picture.

STOP

Stops playback.

SLOW/SEARCH

Slow motion picture in Still mode.

Forward/Reverse rapid scene

search in Play mode.

OPEN/CLOSE

Opens or closes the disc tray.

POWER

Turn the unit on or off.

TV

Sets to TV mode.

MUTE

Mutes the sound instantly.

CHANNEL UP/DOWN

Selects a channel.

SURROUND

Hears a deeper, 3-D sound effect.

NUMBER Keys

Selects a channel directly.

ANGLE

Selects the desired angle

in DVD mode.

AUDIO

Selects the desired audio mode.

TITLE

Selects the desired title by number

on some DVDs.

SELECT

Control navigation around

on-screen menu.

ACTION

Displays Main Menu.

SET

Sets a selected menu.

SKIP I

Skips back one chapter or track.

Goes to previous menu screen.

PAUSE

Pauses picture in Play mode and

frame advance picture in Still mode.

PLAY

Begins playback.

Location of Controls

Note

LSQT0501_01p15.p65 10/26/2001, 2:38 PM8

9

Front View of the Unit and Indicators

PHONES

Connect an earphone

or headphones.

S-VIDEO IN Connector

Connect from other

component with S-Video.

AUDIO/VIDEO IN Connector

Connect from other component.

POWER (See previous page.)

ANGLE Indicator

Lights when a scene recorded

at different angle is detected.

OPEN/CLOSE (See previous page.)

VOLUME UP/DOWN (See previous page.)

CHANNEL UP/DOWN (See previous page.)

Built-In SpeakerX2

Remote Sensor

Aim the remote to this point.

SLEEP TIMER Indicator

Lights when the Sleep-Timer is set.

ON TIMER Indicator

Lights when the On-Timer is set.

Disc Tray

Insert a disc to this tray.

PAUSE (See previous page.)

SKIP+ (See previous page.)

PLAY (See previous page.)

SKIP- (See previous page.)

STOP (See previous page.)

Rear View of the unit

AC Power Plug

When plugged into an AC outlet, the unit

consumes 2.9 W of electric power in OFF

condition.

S-VIDEO IN Connector

Connect from other component with S-Video.

AUDIO/VIDEO IN Connector

Connect from other component.

VHF/UHF Antenna Input Terminal

In from your Antenna or Cable.

Optical Digital Audio Output Connector

Connect to a Dolby Digital decoder or dts

decoder. For details, see page 15.

AUDIO OUT Connector

Connect to other component.

LSQT0501_01p15.p65 10/26/2001, 2:38 PM9

10

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Basic Connections & Initial Setup

For ANT./Cable

Connect the cable from

Antenna/Cable to the VHF/

UHF terminal on the unit.

For DSS/Cable Box

Connect the OUT jack on

your cable box to the VHF/

UHF terminal on the unit

with a RF cable.

V

H

F

/U

H

F

UNIT

IN from

ANT./CABLE

VHF/UHF

WARNING:

Overtightening "Nut type" RF

coaxial cables may damage

jacks. Finger tighten only.

VH

F

/U

H

F

Cable TV

Converter Box

Connecting

Press POWER* on the remote or unit.

• Turn on your cable box and set it to PBS (Public

Broadcast Station) channel in your time zone.

If you use DSS receiver, it must be turned off.

Press CH to start

CHANNEL/CLOCK

AUTO SET operation.

1

3

Press TV on the remote for TV mode.

Press CH to select

English.

OR

Press CH to select

Spanish (Español).

OR

Press VOL+ to select

French (Français).

2

How to do Initial Setup

CH

A

NN

EL

/

C

L

OCK

AUT

O

SET

CONN

E

CT

A

NT

E

NN

A CABLE

L

OC

A

L

PB

S

CH

THE

N

.

AND

I

F

Y

OU

US

E

A

CABLE

B

O

X,

TUNE

I T

TO

Y

OU

R

P

L

E

A

S

E

P

RESS

C

H

U

P

K

E

Y

2

/

6

/

2002

W

ED

12

:

00

P

M

DST

:

O

N

A

UTO

C

L

OCK SET

CO

M

P

L

ETED

SETT

I

N

G

:

CH

1

0

END

:

P

RESS

CH

UP

KEY

PLEASE

SET

CLOCK BY

P

R

ESS

I

NG

ACT

I

ON

KEY

A

UTO

C

L

OCK SET

I S I NCO

M

P

L

ETE

Setup completed

Setup incomplete

If the setup is completed, the

following screen is displayed.

If the following screen is displayed,

set the clock manually. (See

"Manual Clock Set" on next page.)

• If time is not correct... even though

your area observes daylight saving

time and DST is set to ON, do “Time

Zone Adjust” steps on page 13.

IN from

ANT./CABLE

VHF/UHF

LSQT0501_01p15.p65 10/25/2001, 9:36 AM10

11

Initial Setup

Note to CABLE System Installer

This reminder is provided to call the

CABLE (Cable TV) System Installers

attention to Article 820-40 of the NEC

that provides guidelines for proper

grounding and, in particular, specifies

that the cable ground shall be con-

nected to the grounding system of the

building, as close to the point of cable

entry as practical.

a

Press ACTION to display

SET CLOCK screen.

b

SET

:

SE

L

E

C

T

:

END

:

ACT

I

O

N

SET

C

L

OC

K

DST

:

O

N

SE

L

E

C

T

M

O

N

TH

1 / /

:

SET

:

END

:

ACT

I

O

N

SET

C

L

OC

K

DST

:

O

N

SE

L

E

C

T

COMPLETED

2 / 6 /

:

2002

WED

12

00

PM

Press to select the month and

press SET to set. In the same

manner, select and set the date, year,

time, and DST (Daylight Saving Time).

To Make Corrections,

repeatedly press

to move to error,

then correct.

c

Press ACTION twice to end setup.

(Clock starts.)

Unit auto adjusts clock for DST (Daylight

Saving Time.)

■■

■ Spring (First Sunday in April)

DST : ON ->Sets clock ahead one hour.

■■

■ Autumn (Last Sunday in October)

DST : ON ->Turns clock back one hour.

• If your area does not observe Daylight Saving

Time, select DST:OFF.

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

VOL

CH

VOL

10

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

POWER

SELECT

ACTION

CH

VOL+

SET

TV

Manual Clock Set

If Auto Clock Set was incomplete,

manually set the clock as follows.

DST (Daylight Saving Time)

*Important: If a remote control button does not work when pressed, press the TV button

on the remote and try the button again.

LSQTS0501_01p15+2.p65 11/1/2001, 6:04 PM11

12

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Reset Language, Channels, Clock

3) Press to select

“ANTENNA,” then

press SET to set

your antenna

system

(“TV” or “CABLE”).

4) Press to select

“AUTO SET,” then

press SET.

• After Channel Auto Set is

finished, Clock Auto Set

will be performed.

(“TIME ZONE ADJUST” appears

only when auto clock is set.)

1) Press

to select

language icon.

2) Press SET

repeatedly.

For English

For Spanish

For French

Language

Channels

Clock

Press ACTION*

to display MAIN MENU.

3) Press ACTION

to exit.

1) Press to

select “CH.”

2) Press SET.

1) Press to select

“CLOCK.”

2) Press SET.

1

2

3) Press to select

“MANUAL” or “AUTO CLOCK

SET” and press SET.

• For Auto Clock Set, select

“AUTO CLOCK SET,” and

press SET. Then press CH .

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

MENU PR

I

NCIPAL

DVD

BLOQUEO

CANAL

RELOJTV

ID

I

OMA

TERM

I

NAR :

ACT

I

O

N

ELEG

I

R

:

F

I

JAR

:

SET

5

3

1

HOLA

MENU

DVD

BLOCAGE

CANAL

HORLOGETELE

LANGUE

FIN :

ACT

I

O

N

SEL.

:

REGLER

:

SET

5

3

1

BONJOUR

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

HELLO

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END

:

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END

:

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

AUT

O

C

L

OC

K SET

M

A

NU

AL

T

I

M

E

ZO

N

E

A

D

JUS

T

:

0

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET

C

L

OC

K

SET

:

SET

BACK

:

END

:

ACT

I

O

N

SET

C

L

OC

K

DST

:

O

N

2 / 6/

:

2002

WED

12

00

PM

SE

L

E

C

T

HOUR

SE

L

E

C

T

:

4) Press and press SET

to select and set the month,

date, year, time, and DST

(Daylight Saving Time).

• To Make Corrections,

repeatedly press to move to

error, then correct.

5) Press ACTION twice

to start the clock and

exit this mode.

ANT

ENN

A

:

C

ABLE

A

U

T

O

S

E

T

W

EAK

S

I

GNAL

D

I

SPLAY

:

OFF

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET UP

CH

A

NNE

L

LSQT0501_01p15.p65 10/25/2001, 9:39 AM12

13

Initial Setup

Time Zone Adjust

3) Press to select

TIME ZONE ADJUST

and press or to

subtract or add

hour(s) as necessary.

4) Press ACTION

twice to exit.

.

(Only when Auto Clock is set.)

Time Zone Adjust

1) Press to

select “CLOCK.”

2) Press SET.

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END

:

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

AUT

O

C

L

OC

K SET

M

A

NU

AL

T

I

M

E

ZO

N

E

A

D

JUS

T

:

+1

SELE

C

T

:

SET

:

END

:

ACT

I

O

N

SET

C

L

OC

K

AUT

O

C

L

OC

K SET

M

A

NU

AL

T

I

M

E

ZO

N

E

A

D

JUS

T

:

0

SELE

C

T

:

SET

:

END

:

ACT

I

O

N

SET

C

L

OC

K

Add or Delete a Channel

To add channel:

Select channel with Number

keys and press ADD/DLT.

To delete channel:

Select channel with

CH

or Number keys

and press ADD/DLT.

C

HANNEL

08

ADDED

C

HANNEL

08

DE

L

E

T

ED

*Important: If a remote control button does not work when pressed, press the TV button

on the remote and try the button again.

Reset all unit Memory Functions

When moving unit to a new location, or if a

mistake was made in the Initial Setup section.

• Make sure a disc is not inserted in the unit.

3

1

2

Do “Initial Setup” on page 10.

Press and hold both PLAY and

SKIP- on the unit for more than 5

seconds.

• The power will shut off.

• Please ignore “NO DISC” warning.

Turn the unit

Power on.

LSQTS0501_01p15+2.p65 11/2/2001, 11:27 AM13

14

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Enjoying digital audio output from the

digital audio output connector

Notes on audio output from the optical digital

audio output connector

*1 The type of audio output from the connector can

be selected by the Settings for DVD Operation.

(See page 46.)

*2 Sound having 96 kHz sampling is converted into

48 kHz sampling when it is output from the unit’s

optical digital audio output connector.

For your reference:

• Dolby Digital is a digital sound compression

technique developed by the Dolby Laboratories

Licensing Corporation. Supporting 5.1-channel

surround sound, as well as stereo (2-channel)

sound, this technique enables a large quantity of

sound data to be efficiently recorded on a disc.

• Linear PCM is a signal recording format used in

CDs. While CDs are recorded in 44.1 kHz/16 bit,

DVDs are recorded in 48 kHz/16 bit up to 96 kHz/

24 bit.

• If you have a Dolby Pro Logic Surround decoder,

you will obtain the full benefit of Pro Logic from the

same DVD movies that provide full 5.1 channel

Dolby Digital soundtracks, as well as from titles

with the Dolby Surround mark. For information on

Panasonic or Technics Dolby Pro Logic Surround

Sound Decoders please contact your local dealer.

Ready Checklist

Turn down the volume, then turn this unit,

as well as other equipment to be

connected, off before proceeding with

connection.

Do not block ventilation holes of any of

the equipment and arrange them so that

air can circulate freely.

Read through the instructions before

connecting other equipment.

Ensure that you observe the color coding

when connecting audio and video cables.

Disc

DVD

Video

CD

Sound

recording

format

Dolby

Digital

Linear PCM

(48/96 kHz

16/20/24 bit)

dts

MPEG 1

Linear PCM

Optical digital audio

output from connector

Dolby Digital bitstream

(1-5.1 ch) or OFF (no

output)*

1

Linear PCM (2ch)

(48 kHz sampling/16 bit

only)*

2

or no output*

1

Bitstream or no output*

1

PCM

(44.1 kHz sampling)

Linear PCM

(44.1 kHz sampling)

■ ■

■ Unit -> Amplifier -> Speaker

Manufactured under license from Dolby

Laboratories. “Dolby”, “Pro Logic”, and

the double-D symbol are trademarks of

Dolby Laboratories. Confidential

Audio Connections

Amplifier

Unit

Speaker

AUDIO OUT

R L

AUDIO IN

Do the "Speaker ON/OFF system" steps on

page 47, and select "OFF".

LSQT0501_01p15.p65 10/10/2001, 11:55 AM14

15

Initial Setup

■ ■

■ Unit -> Decoder with Dolby Digital -> Amplifier -> Speaker

or

dts (digital theater systems)

When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts

bitstream is output from the unit Optical digital audio output connector. When the unit is

connected to a Dolby Digital decoder or dts decoder, you can enjoy theater-quality audio

in your home. [An optical digital audio cable (optional) is required when an optional

Dolby Digital decoder or dts decoder is used.]

Notes on connecting an Optical

digital audio cable (optional)

• Firmly connect the cable to the

connector.

IMPORTANT NOTE:

Caution for optical digital audio

output connector:

• When connecting an amplifier (with

an Optical digital input connector)

which does not contain the Dolby

Digital or dts decoder, be sure to

select “OFF” at “Dolby Digital” and

“OFF” at “dts” of the Settings for DVD

Operation “AUDIO OUTPUT” (see

page 42). Otherwise, any attempt to

play DVDs may cause such a high

level of noise that it may be harmful

to your ears and damage your

speakers.

• When a dts decoder is connected,

please select “Bitstream” at “dts” of

the Settings for DVD Operation

“AUDIO OUTPUT”. If “OFF” is

selected, there will be no sound.

(See page 42).

• Video CDs and CDs can be played

as normal.

Note:

• Some dts decoders which do not

support DVD-dts interface may not

work properly with the unit.

Optical

Amplifier

Front

Speaker

Center Speaker

Front

Speaker

Unit

Subwoofer

To optical digital audio

input connector

Decorder with Dolby Digital

dts processing (optical)

Optical digital audio

cable (optional)

Surround

speaker

Surround

speaker

LSQTS0501_01p15+2.p65 11/2/2001, 12:22 PM15

16

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

5

Press or

number key(s) (see

below) to select title

and press SET to play.

Ready Checklist

All connections are made. (See page 10.)

Your unit is plugged in.

If unit is connected to an audio amplifier,

turn the stereo system’s power on.

1

Press POWER* on the remote or unit.

Press DVD to select DVD mode.

• If a disc is already inserted, go to step 4.

(Depending on the disc, playback may start

automatically.)

Press OPEN/CLOSE to insert a disc and

place disc into disc tray.

2

3

Press PLAY to start play.

• Disc tray closes automatically.

4

If an interactive DVD*

1

or a

Video CD with playback

control*

2

is used and a TITLE

MENU appears, go to step 5.

• You may also close the tray

by pressing OPEN/CLOSE.

• Data reading time differs with

each disc.

*

1

Interactive DVD...

May include multiple camera angles,

stories, etc.

*

2

Video CD with playback control...

Particular scenes or information can be

interactively selected from a menu that

appears on the screen.

Operation using unit buttons

Press SKIP | or | to go to next or previous

menu screen.

• SKIP function not available with all discs.

Please refer to disc jacket for operation information.

To return to MENU (play stops),

Press TITLE, MENU, or RETURN. (DVD)

Press RETURN. (Video CD)

Press STOP to stop play.

6

7

Press OPEN/CLOSE to eject the disc.

Using number key(s)

starts play automatically.

Basic DVD Operation

• Hold disc by its edges

only (page 7) with printed

side up and use guides

to place into tray. Use

3”(8 cm) or 5” (12

cm) disc.

1

2

1

CLOSE

READING

T

I

TLE MENU

Cas

t

l

es

Love

r

s

Dogs

B

i

r

ds

T

I

TLE MENU

Cas

t

l

es

Love

r

s

Dogs

B

i

r

ds

Dogs

of the world

1 digit number 1 ••• 1

2 digit number 12 ••• 10 ->1 ->2

3 digit number 123 •••100 ->1 ->2 ->3

3•7

Press OPEN/CLOSE.

1

Press POWER.

3 Insert disc.

6 Press STOP. 4 Press PLAY.

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

VOL

CH

VOL

10

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

POWER

SELECT

TITLE MENU

SET

Number

Keys

SKIP I

OPEN/

CLOSE

DVD

10

PLAY

SKIP I

PAUSE

SLOW

STOP

RETURN

LSQT0501_16p23.p65 10/26/2001, 2:19 PM16

17

DVD Operation

• Please read the disc jacket for operation

information.

• If a single sided disc is placed in upside

down, “PLEASE CHECK THE DISC,

AND FOR STAINS OR SCRATCHES ON

DISC” is displayed.

• Remove disc and press unit POWER off

when not in use.

• Disc continues to rotate with menu displayed

even after play is done. Press STOP to clear

menu display when finished with menu.

■Forward/Reverse rapid scene search

->Press SEARCH or SEARCH

during play.

->Press PLAY to release.

• Starting forward/reverse search during play started

from menu on Video CDs may recall menu.

• Search speed, slow at first, increases with each

additional press of the button up to 5 levels.

■ Forward/Reverse Chapter/Track Skip

Press SKIP | or | during play.

Each press skips a chapter (DVD) or track

(Video CD/CD).

• Pressing | SKIP once midway through a

chapter/track returns to start of that chapter/

track. Each additional press skips back one

chapter/track.

• Pressing SKIP

| or | during play started

from menu on Video CDs may recall menu.

■Still (Pause) Picture

-> Press PAUSE during play.

-> Press PLAY to release.

• DVD/Video CD : The unit will enter Still picture

mode.

• CD : The unit will enter Pause mode.

■Frame by Frame picture

(DVD/Video CD)

-> Press PAUSE in Still mode.

-> Press PLAY to release.

• Each press advances picture one frame.

• Hold down for consecutive frame advance.

• Whether pictures are advanced by “FRAME” or

“FIELD” is selected automatically (see page 43).

■Slow Motion picture (DVD/Video CD)

-> Press SLOW or SLOW (DVD only)

in Still mode.

-> Press PLAY to release.

• Slow motion speed, slow at first, is increased with

each additional press of the button up to 5 levels.

• Reverse slow motion is not available for video CDs.

• When

appears on the screen while a button is

being operated, it means that the corresponding

operation is prohibited by the unit or the disc.

Notes

Auto-Power Off function

1.Do steps 1-4 (previous page).

When menu appears, press STOP.

2.Press number key(s) to select

desired track (play begins).

• Check disc for track numbers.

• Press “1” to start at beginning of disc.

To Resume Menu use,

Press STOP, and press PLAY, then menu

appears. Now, go to step 5 (previous page).

Enjoy Video CDs featuring

playback control without using

menus (Video CDs only)

*Important: If a remote control button does not work when pressed, press the DVD button

on the remote and try the button again.

Current playback position

Reverse Skip Forward Skip

Chapter/Track Chapter/Track Chapter/

T

rackChapter/

T

rack

LSQT0501_16p23.p65 10/31/2001, 9:12 PM17

18

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

TV Operation

1

Press POWER* on the remote or unit.

■Using the 100 key

When selecting CABLE channels 100 to 125

with the number keys, first press the 100 key,

and then enter the remaining two digits.

■Rapid Tune

Press R-TUNE to display the last channel you

were watching.

■Audio Mute

Press MUTE to instantly mute the sound.

Press again to restore the previous sound level.

■Phones

Connect an earphone (not supplied) or

headphones (not supplied) to the Phones Jack.

Ready Check List

All connections are made.

Your unit is plugged in.

Use CH or

number keys to

select a channel.

2

3

Press VOL + or

VOL - to adjust

volume.

PHONES

Jack

POWER

VOL+/VOL

-

CH

*Important: If a remote control button does not work

when pressed, press the TV button on

the remote and try the button again.

0

8

24

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

VOL

CH

VOL

10

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

POWER

Number

Keys

MUTE

OPEN/

CLOSE

VOL +/-

RAPID

TUNE

100 Key

CH

LSQT0501_16p23.p65 10/25/2001, 9:58 AM18

19

TV Operation

Receivable Broadcast Types

The following are possible audio broadcast types and

on-screen displays. The signal being received is indicated with

an “ ” mark while the selected audio mode is indicated with an

arrow. To change the audio mode for these broadcasts, see the

“Select Audio Mode for TV Viewing” section (below.)

Press DISPLAY to display

the broadcast signal being received.

MTS Stereo and SAP broadcast

Multi-channel Television Sound Stereo

(main language) and Secondary Audio

Program (sub language) broadcasts are

being received simultaneously. Select the

STEREO or SAP audio mode.

MTS Stereo broadcast

Multi-channel Television Sound Stereo

broadcast. Select STEREO audio mode.

• If stereo broadcast is weak and the

display flickers, select MONO audio

mode for possibly better results.

SAP broadcast

Secondary Audio Program

(sub language).

Select SAP audio mode for the sub

language.

Select Audio Mode for TV Viewing

Press AUDIO to select the desired audio mode as described above.

(Arrow shows selection.)

• Each press of AUDIO will change the audio mode as shown below.

• “SAP” is selected with first press of AUDIO.

MTS Broadcast/TV Stereo System

MONO broadcast

Normal monaural sound broadcast.

< Example >

Press AUDIO

Equipped with

®

-TV Noise

Reduction for true MTS

reproduction.

®

-TV Noise

Reduction is required for good

stereo separation and audio

fidelity.

®

is a registered

trademark, and is licensed by

®

Technology Licensing.

DISPLAY

AUDIO

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

VOL

CH

VOL

10

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

STOP

1

2

:

0

A

M

ABC

STER

EO

SAP

M

ONO

STOP

1

2

:

0

A

M

ABC

STER

EO

SAP

M

ONO

STOP

1

2

:

0

A

M

ABC

STER

EO

SAP

M

ONO

STOP

1

2

:

0

A

M

ABC

STER

EO

SAP

M

ONO

STOP

1

2

:

0

A

M

ABC

STER

EO

SAP

M

ONO

STOP

1

2

:

0

A

M

ABC

STER

EO

SAP

M

ONO

STOP

1

2

:

0

A

M

ABC

STER

EO

SAP

M

ONO

LSQT0501_16p23.p65 11/1/2001, 4:38 PM19

20

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Closed Caption System

Closed Caption Mode Feature

1

2

3

4

5

Closed Caption is ...

This multi-use system not only allows the hearing impaired to enjoy selected programs,

but also makes useful information from TV stations available to everyone.

Press ACTION* to display MAIN MENU.

1) Press to

select “TV.”

2) Press SET to

display SET UP TV

screen.

1) Press to

select “CAPTION”.

2) Press SET to

display CAPTION

screen.

Press ACTION three times to return

to the normal screen.

1) Press

to

select CAPTION

MODE.

2) Press SET

repeatedly to

select mode.

(See left.)

Closed Caption Mode

Selections

Caption Mode: CAP C1 or C2

A narration of selected TV

programs is displayed.

Check TV program listings for

CC(Closed Caption)

broadcasts.

Caption Mode: TEXT C1 or C2

The lower half of the screen will

be blocked out. When the TV

station broadcasts information,

such as program listings, it will

appear in this space.

Caption Mode: OFF

Closed Caption / Text narration

will not be displayed.

NOTE :

The closed caption or text signal

may be broadcast over C1, C2,

or both. Also, text contents can

vary so you may wish to try

different settings.

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

CAPT

I

ON

CA

PT

I

O

N

MODE

:

CAP C1

CC ON MUTE

:

CAP C1

SET

:

SET

SE

L

E

C

T

:

END

:

ACT

I

O

N

OFF

CAP C1

TEXT C1

CAP C2

TEXT C2

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET

UP TV

CAPT I ON

I

NPUT

SELECT

:

TUNER

SET

UP

AUD

I

O/V

I

DEO

SPEAKER

:

ON

R

E

MO

TE

W

A

R

N

I

NG

:

ON

DVD

VOL ADJUST

:

+ 1

LSQT0501_16p23.p65 11/1/2001, 4:39 PM20

21

TV Operation

1

2

4

6

5

3

7

Press ACTION three times to return to

the normal screen.

Caption On Mute Feature

Closed Caption narration, if available, is displayed

when MUTE button is pressed for silence.

Press ACTION to display MAIN MENU.

1) Press

to select “TV.”

2) Press SET to

display SET UP

TV screen.

1) Press to

select “CAPTION”.

2) Press SET to

display CAPTION

screen.

1) Press to select

CAPTION MODE.

2) Press SET

repeatedly to select

“OFF.”

1) Press to select

CC ON MUTE.

2) Press SET

repeatedly to select

desired mode.

• Each press of SET will

change the display as

shown left.

• The caption may be

broadcast over CAP C1

or C2.

Press MUTE to mute the sound and

display closed captioning.

• To cancel, press MUTE again.

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

CAPT

I

ON

CA

PT

I

O

N

MODE

:

OFF

CC ON MUTE

:

CAP C1

SET

:

SET

SE

L

E

C

T

:

END

:

ACT

I

O

N

NO

CAP C1

CAP C2

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

VOL

CH

VOL

10

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

MUTE

SELECT

ACTION

SET

*Important: If a remote control button does not work when pressed, press the TV button

on the remote and try the button again.

• When a disc supporting closed

caption is used, the subtitle and the

closed caption may overlap. In this

case, turn the subtitle or caption on

mute mode off. (See page 32.)

Note

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET

UP TV

CAPT I ON

I

NPUT

SELECT

:

TUNER

SET

UP

AUD

I

O/V

I

DEO

SPEAKER

:

ON

R

E

MO

TE

W

A

R

N

I

NG

:

ON

DVD

VOL ADJUST

:

+ 1

LSQT0501_16p23.p65 10/17/2001, 8:54 AM21

22

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

TV Timer Features

1

ON-TIMER with Alarm

Ready Check List

The clock is set to correct time.

This unit can be set to automatically power on in one of

2 modes (TV, or DVD/Video CD/CD).

• When the ON-TIMER starts, the SLEEP

TIMER for 60 minutes will start

automatically. SLEEP TIMER Indicator

lights during SLEEP TIMER.

Press TIMER* to display

SET TIMER screen.

ON TIMER Note

2

3

1) Press to select

desired settings.

2) Press SET to set

the ON-TIMER

TIME or

ON-TIMER mode.

• Make sure a disc is

inserted if DVD

(DVD/Video CD/CD)

mode is selected.

• ON-TIMER mode

selection order

4

Press to select

ALARM “ON” or

“OFF.”

When “ON” is selected,

an alarm will gradually increase in volume for

one minute or until canceled by pressing any

button (including VOL + -).

To Make Corrections,

use and to move back and correct.

5

Press TIMER to set ON TIMER.

• “ON TIMER SET” is displayed.

• ON TIMER Indicator lights on the unit.

To Cancel ON-TIMER set,

Repeat steps 1 and 2. Then, press ADD/DLT to

clear the time in step 3. Now, press TIMER to end.

“ON TIMER END” briefly appears on-screen.

1) Press to select

“ON TIMER.”

2) Press SET to

display ON TIMER

screen.

SET

:

SET

SE

L

E

C

T

:

END

:

T I MER

SET T

I

MER

ON T

I

MER

S

LEEP

T

I

MER : 00

O

N T

I

M

E

R

SE

L

E

C

T

H

OU

R

SET

:

SET

SE

L

E

C

T

:

END

:

T I MER

ALAR

M

:

O

N

C

H

01

C

H

125

C

H

02

C

H

03

DVD

O

N T

I

M

E

R

SELECT

ALA

RM

SET

:

SET BACK

:

SE

L

E

C

T

:

END

:

T I MER

ALARM

:

ON

C

ANCEL

:

ADD / DLT

Sleep Timer

This unit can be set for auto power off.

Press TIMER to display SET

TIMER screen.

1

To cancel,

press SET repeatedly until 00 appears.

2

1) Press

to select

SLEEP

TIMER.

3

Press TIMER to return to the

normal screen.

• Pressing DISPLAY with sleep timer

set displays remaining time.

• SLEEP TIMER Indicator lights on the unit.

SET

:

SET

SE

L

E

C

T

:

END

:

T I MER

SET T

I

MER

ON T

I

MER

S

LEEP

T

I

MER : 00

SLEEP TIMER

30 60 90 00

2) Press SET repeatedly to

select the desired time.

SLEEP TIMER

Indicator

ON TIMER

Indicator

LSQT0501_16p23.p65 10/31/2001, 9:13 PM22

23

TV Operation

1

2

:

0

P

M

CH08

STER

EO

SAP

M

ONO

ADD/DLT

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

VOL

CH

VOL

10

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

SELECT

TIMER

SET

TV Status & Clock Display

Press DISPLAY to display or remove the overlay.

Blue Screen Display

When you change channels, the channel number

will be displayed.

Channel Display

Whenever the selected channel has no

broadcast signal with the Weak Signal

Display Feature set to “OFF” (see page 26),

the screen will turn solid blue.

Current Time

Receivable

Broadcast Types

(See page 19.)

Channel

0

8

DISPLAY

On-Screen Displays (OSD)

*Important: If a remote control button does not work when pressed, press the TV button

on the remote and try the button again.

LSQT0501_16p23.p65 10/17/2001, 8:54 AM23

24

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Cable Box Universal Remote Control Feature

Universal Remote Control is...

The Remote Control may be set up to control some

basic DSS or Cable box functions.

The Universal Remote Control Setup

1

Using the Universal Remote Control

Press TV or DVD, or DSS CABLE on the

remote control to select the desired mode. (See

below for buttons available in each mode.)

Once the remote control has been properly set up, you

can select TV, DVD, DSS or CABLE mode depending on

which functions you wish to control. (See below.)

Find your DSS box or Cable box

Brand Code Number from one of

the charts on the next page.

3

Confirm code entry.

Press POWER* to turn selected unit

ON or OFF.

• See below for controllable functions in each mode.

• Please repeat the Universal Remote Control Setup after

replacing remote control batteries.

• The remote control will not operate all DSS receivers or

Cable Boxes made by the manufactures listed. If you get

no results, your particular brand cannot be controlled.

Set to TV, DVD:

• All TV and DVD functions.

Set to DSS CABLE:

• CABLE/DSS functions, e.g. POWER, ENTER,

Number Keys (except 100 key), CH UP/DOWN.

Notes

2

Setup remote.

Hold down DSS CABLE and press

Number Keys to enter code.

• For code 100 or greater, first press 100 key,

then the remaining digits. E.g. for 102, press

100, then press 0, and then press 2.

ENTER

POWER

NUMBER Keys

DSS/CABLE

TV

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

VOL

CH

VOL

10

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

DVD

LSQT0501_24p31.p65 10/17/2001, 9:42 AM24

25

DVD Operation

Advanced Operation

*Important: If a remote control button does not work when pressed, press the TV, DVD button

on the remote and try the button again.

• In DSS or CABLE mode, it may be necessary to press DISPLAY/ENTER after pressing number

keys for channel selection.

• In DSS or CABLE mode, POWER, CH Up/Down, Number Keys, ACTION, TIMER, DISPLAY/

ENTER, SEARCH, SKIP+/-, R-TUNE, SELECT, SET, ZOOM, ANGLE, AUDIO, TITLE, MENU, or

ADD/DLT are not available. Press TV, DVD to use these functions.

• Depending on your DSS receiver or Cable box brand, some of the functions listed may not be

remote controllable.

• Some DSS receiver or Cable box brands require you to turn on the power manually.

• Due to changes in infra-red commands used by manufacturers, some brands have several codes.

If your unit does not respond to the first code, please try the next one.

Notes

DSS Brand Code Numbers

Archer ..................... 44, 06, 01, 120, 05, 63, 126

Cableview .... 29, 09, 01, 63, 120, 44, 42, 30, 52,

04, 124, 126

Citizen ............... 44, 52, 30, 63, 42, 04, 124, 126

Curtis ................................ 08, 09, 25, 61, 53, 87

Century ................................. 44, 51, 75, 59, 126

Cabletenna.............. 29, 09, 01, 63, 120, 44, 126

Cable Cinema.......... 29, 09, 01, 63, 120, 44, 126

Diamond.................. 29, 09, 01, 63, 120, 44, 126

Eagle ................... 62, 40, 22, 13, 58, 20, 26, 107

Eastern ............................................. 28, 29, 130

Explorer ............................ 08, 09, 25, 61, 53, 87

Gemini............................................... 30, 04, 124

General Electric ................................ 01, 57, 120

General Instruments ... 01, 84, 83, 34, 03, 02, 04,

55, 65, 66, 67, 68, 120, 106, 121, 122, 115, 117,

118, 124

Gerrard ......................................... 44, 51, 75, 59

GC Electronics ........... 44, 42, 63, 29, 30, 52, 04,

124, 126

Hamlin ........... 41, 14, 15, 28, 102, 104, 103, 130

Hitachi ............................................................. 31

Jerrold....... 01, 84, 83, 34, 03, 02, 04, 55, 65, 66,

67, 68, 120, 106, 121, 122, 115, 117, 118, 124

Jasco................................................ 30, 04, 124

Macom ............................................................ 31

Magnavox ............................................... 26, 112

Matsushita ............................ 17, 16, 08, 87, 109

Movietime.................. 32, 39, 42, 44, 126, 38, 40

Maestro..................................................... 74, 35

NEC .............................................. 40, 19, 38, 32

NSC .............................................. 40, 19, 38, 32

Novavision ........................ 08, 09, 25, 61, 53, 87

Next Level............ 01, 84, 83, 34, 03, 02, 04, 55,

65, 66, 67, 68, 120, 106, 121, 122

Oak ........................................... 46, 11, 129, 101

Toshiba...........................................................90

Hitachi/ Hughes ........................................91, 99

Primestar ........................................................92

Drake..............................................................93

Magnavox.................................................94, 95

Uniden ......................................................94, 95

Optimus .................................................... 94, 95

Panasonic....................................................... 96

ProScan.......................................................... 97

RCA ................................................................ 97

SONY ..................................................... 98, 105

Oak Sigma ................................ 46, 11, 129, 101

Panasonic ............................. 17, 16, 08, 87, 109

Philips................ 23, 24, 20, 13, 07, 50, 128, 129

Pioneer................................................ 06, 05, 12

Pulsar................ 04, 42, 63, 44, 30, 52, 124, 126

Quest .................................................. 06, 05, 12

Radio Shack ......................... 44, 51, 75, 59, 126

RCA ...................................... 17, 16, 08, 87, 109

Realistic ................................ 44, 51, 75, 59, 126

Recoton ................................ 44, 51, 75, 59, 126

Regal............. 41, 14, 15, 28, 102, 104, 103, 130

Regency ........................................... 28, 29, 130

Rembrandt .. 44, 42, 63, 29, 01, 32, 39, 120, 126

Samsung................................. 42, 06, 32, 05, 40

Scientific Atlanta ................ 08, 09, 25, 61, 53, 87

Sheritech......................................................... 27

Signal ...................................................... 26, 112

SL Marx ........ 42, 06, 32, 40, 43, 44, 52, 63, 126

Sprucer ................................. 17, 16, 08, 87, 109

Standard Components.......... 32, 39, 42, 44, 126

Stargate ......... 04, 42, 32, 40, 63, 44, 30, 52, 06,

124, 126

Sylvania .................................................... 19, 18

Teknika ..................................................... 74, 35

Telecaption ............................................. 77, 127

Teleview............................ 40, 19, 38, 32, 42, 06

Texscan.................................................... 19, 18

Tocom............................. 34, 33, 01, 42, 66, 120

Toshiba ........................................................... 36

Unika....................... 44, 42, 63, 29, 01, 126, 120

Universal......................... 52, 43, 44, 63, 42, 126

Viewstar .............. 62, 40, 22, 13, 58, 20, 26, 107

Videoway .................................... 07, 23, 50, 129

Vidtek .............................................................. 64

Zenith .......................................... 07, 23, 50, 129

Cable Box Brand Code Numbers

LSQT0501_24p31.p65 10/17/2001, 9:42 AM25

26

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

*Important: If a remote control button does not work

when pressed, press the TV button on

the remote and try the button again.

Special Features

Remote Warning ON/OFF

1

Press ACTION twice to return to

normal screen.

When Universal Remote Control (page 24) is used, and

this feature is set to “ON,” a warning appears whenever

an invalid key is pressed in DSS or Cable mode.

2

3

Press ACTION to display MAIN MENU.

1) Press to

select “TV.”

2) Press SET o

display SET

UP TV screen.

1) Press to

select REMOTE

WARNING.

2) Press SET to set

“ON” or “OFF.”

• “REMOTE WARNING : OFF”

-> Remote warning will not appear even if

invalid key is pressed.

Remote Warning ON/OFF

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

When “ON” is selected, the picture is displayed even

when a broadcast signal is weak or non-existent.

Weak Signal Display ON/OFF

1

2

3

• “ON” =Picture is displayed regardless of

signal condition, and may not always

be clearly visible.

“OFF”=Screen turns solid blue when signal

is absent or weak.

• If unit is connected to equipment which has

blue back feature, selecting “ON” will have

no effect on the other equipment.

4

Press ACTION* to display

MAIN MENU.

1) Press

to select “CH.”

2) Press SET to

display SET

UP CHANNEL

screen.

Press ACTION twice

to return to the normal screen.

1) Press to

select WEAK

SIGNAL

DISPLAY .

2) Press SET to

set “ON” or

“OFF.”

Notes

You can hear a deeper, 3-D sound effect using

just the unit’s two front speakers.

Press SURROUND.

• “SURROUND ON” is

displayed.

To Cancel,

press SURROUND.

Set Surround sound.

Surround Sound System

SURROUND ON

Notes

• Surround sound effect is not available for

normal (mono) broadcasts.

• The surround effect (TV mode only) is not

output to Audio Output L/R Connector.

Remote Warning ON/OFF

1

Press ACTION twice to return

to normal screen.

2

Repeat steps 1 and 2 on “Remote

Warning ON/OFF” section above.

1) Press to

select DVD VOL

ADJUST.

2) Press SET to

set the level (0,

+1, or +2).

DVD Volume Adjust

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET

UP TV

CAPT I ON

I

NPUT

SELECT

:

TUNER

SET

UP

AUD

I

O/V

I

DEO

SPEAKER : ON

R

E

MO

TE

W

A

R

N

I

NG

:

ON

DVD

VOL ADJUST

:

+1

3

4

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET

UP TV

CAPT I ON

I

NPUT

SELECT

:

TUNER

SET

UP

AUD

I

O/V

I

DEO

SPEAKER

:

ON

R

E

MO

TE

W

A

R

N

I

NG

:

ON

DVD

VOL ADJUST

:

+ 1

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

ANT

ENN

A

:

C

ABLE

A

U

T

O

S

E

T

W

EAK S

I

GNAL

D

I

SPLAY

:

OFF

SELE

C

T

:

SET

:

END

:

ACT

I

O

N

SET UP

CH

A

NNE

L

LSQT0501_24p31.p65 10/31/2001, 9:20 PM26

27

DVD Operation

Advanced Operation

Press ACTION twice

to end setup.

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

SPE

AKER

:

ON

Special Features/V-Chip Control

Feature

Press ACTION to display MAIN MENU.

Enter Secret Code

V-Chip Control Feature is...

This unit has a built-in V-Chip Control which allows

you to block unwanted TV usage based on US

MOVIES and US TV PROGRAMS Ratings.

A 4-digit code must be entered to view a blocked

program or change rating settings.

1

• DO NOT forget your secret code.

• Once ratings are set, restricted tapes or programs

cannot be accessed unless the secret code is entered.

Changing your secret code

• You will need your current code. Do steps 1 ~ 3.

In step 4, press ADD/DLT to clear current code.

Repeat steps 3 and 4 to enter new code.

1) Press to select

LOCK.

2) Press SET to display

screen.

2

1) Press Number

Keys to enter your

secret code.

2) Enter same code

again for confirmation.

3

Press SET to display

US Ratings menu

(see page 28).

Or

Press ACTION

Twice to exit.

4

Notes

Process of V-Chip Control Feature

Setup

Enter Code

• Step 2) not necessary

when changing rating

or secret code.

• Take care that you are

not observed entering

the secret code.

To Make Corrections,

Press

repeatedly to

move the cursor. Press

number keys to make

the correction.

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

BACK SPACE

:

ENTER

:

0

-

9

END

:

ACT

I

O

N

LOCK

ENTER 4

-

D

I

G

I

T

CODE

-

LOCK

RECOGN

I

ZED

CHANGE

CODE

:

ADD

/

DLT

CONT

I

NUE

:

SET

END

:

ACT

I

O

N

CONF

I

RM 4

-

D

I

G

I

T CODE

****

Speaker ON/OFF System

1

Allows you to turn off the speaker of the

unit when it is connected to external

audio equipment.

Press ACTION

to display MAIN MENU.

2) Press SET to display SET UP

TV screen.

2

3

2) Press SET to set “ON” or “OFF.”

• “OFF” MUTE and VOL+ - buttons

do not function

4

1) Press

to select

SPEAKER.

1) Press

to select

“TV”.

Auto Shut Off

No broadcast signal in TV mode,

DVD stop for 5 minutes

Power turns off

• This feature is canceled if any

button is pressed during above

conditions.

Speaker ON/O

Selecting Input Mode

Method 1:

Press CH . The display will change as follows.

Method 2:

a Press ACTION for MAIN MENU.

b

Press

to select “TV”, then press SET

for SET UP TV screen.

c

Press

to select “INPUT SELECT,” and

then press SET to select “TUNER” or “LINE.”

d Press ACTION twice to exit this mode.

1

2

3

125LINE

(CABLE)

69

(TV)

or

Auto Operation Functions

Blocking

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET

UP TV

CAPT I ON

I

NPUT

SELECT

:

TUNER

SET

UP

AUD

I

O/V

I

DEO

SPEAKER

:

ON

R

E

MO

TE

W

A

R

N

I

NG

:

ON

DVD

VOL ADJUST

:

+ 1

LSQT0501_24p31.p65 11/1/2001, 4:46 PM27

28

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

V-Chip Control Feature (continued)

Enter Code

If LOCK menu is not displayed, do

“Enter Secret Code” steps on page 27.

Blocking

Process of V-Chip Control Feature

Setup

1

1) Press * to

select US

MOVIES.

2) Press SET to set

“ON” or “OFF.”

■“ON” V-Chip Control is activated.

■“OFF” V-Chip Control is deactivated.

Setup US MOVIES Ratings

• “NEXT PAGE” displays CANADIAN V-Chip setting menu. Not

necessary except when viewing Canadian tapes or broadcasts.

1

1) Press to

select US TV

PROGRAMS.

2) Press SET to

set “ON” or

“OFF.”

Setup US TV PROGRAMS Ratings

■“ON” V-Chip Control is activated.

■“OFF” V-Chip Control is deactivated.

2

1) Press to

select

CHANGE

SETTINGS.

2) Press SET to

display screen.

3

1) Press

to select

VIEW NR

PROGRAMS?.

2) Press SET to

set “YES” or

“NO.”

NR (Not Rated) PROGRAMS

Some movies, such as old movies or

foreign movies usually have no ratings.

4

Press to

select and SET

to set ratings to

be blocked.

(See ratings chart

next page.)

5

Press ACTION to redisplay LOCK

menu and continue with US TV

PROGRAMS Ratings Setup (this page).

Or, press ACTION three times to exit.

5

Press ACTION three times

to exit this mode.

NR (Not Rated) PROGRAMS

Some TV shows, such as news, sports,

weather, bulletins, emergency

information usually have no ratings.

3

1) Press

to select

VIEW NR

PROGRAMS?.

2) Press SET to

set “YES” or

“NO.”

2

1) Press to

select

CHANGE

SETTINGS.

2) Press SET to

display screen.

• You may select from

standard TV ratings

(chart 1), or customize

to a specific content

rating (chart 2).

4

Press to

select and SET

to set ratings to

be blocked.

(See ratings

charts next page.)

• Ratings highlighted

in Green will be

blocked. Ratings in

white letters will not

be blocked.

Note

US MOV

I

ES

:

O

FF

CHANGE

SET

T

I

NGS

US

TV

PROGRAMS

:

O

FF

CHANGE

SET

T

I

NGS

DVD

LOCK

:

O

FF

CHANGE

SET

T

I

NGS

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

LOCK

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

LOCK

US MOV

I

ES

:

O

FF

CHANGE

SET

T

I

NGS

US

TV

PROGRAMS

:

O

FF

CHANGE

SET

T

I

NGS

DVD

LOCK

:

O

FF

CHANGE

SET

T

I

NGS

US MOV

I

ES

:

O

FF

CHANGE

SET

T

I

NGS

US

TV

PROGRAMS

:

O

FF

CHANGE

SET

T

I

NGS

DVD

LOCK

:

O

FF

CHANGE

SET

T

I

NGS

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

LOCK

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

LOCK

US MOV

I

ES

:

O

FF

CHANGE

SET

T

I

NGS

US

TV

PROGRAMS

:

O

FF

CHANGE

SET

T

I

NGS

DVD

LOCK

:

O

FF

CHANGE

SET

T

I

NGS

TV

-

Y

TV

-

Y7

TV

-

G

TV

-

PG

TV

-

1

4

TV

-

MA

FV

V

S L D

V

S L D

V

S L

UNLOCKED

V

I

E

W

NR

PROGRAMS

?

:

YES

CONTA

I

NS NO RAT

I

NG

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

V

I

E

W

NR

PROGRAMS

?

:

YES

FOR

ALL

CH

I

LDREN

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

TV

-

Y

TV

-

Y7

TV

-

G

TV

-

PG

TV

-

1

4

TV

-

MA

FV

V

S L D

V

S L D

V

S L

UNLOCKED

LSQT0501_24p31.p65 10/17/2001, 9:42 AM28

29

DVD Operation

Advanced Operation

*Important: If a remote control button does not work when pressed, press the TV button

on the remote and try the button again.

G

PG

PG-13

R

NC-17

X

GENERAL AUDIENCE:

All ages admitted.

PARENTAL GUIDANCE:

Some material may not be suitable

for children.

PARENTS CAUTIONED:

Some material may be inappropriate

for children under 13.

RESTRICTED:

Children under 17 must be

accompanied by a parent or adult.

OVER AGE 17 ONLY:

No one 17 and under admitted.

ADULTS ONLY:

FV

V

S

L

D

Fantasy Violence

Violence

Sexual Situations

Adult Language

Sexually Suggestive Dialogue

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

FOR ALL CHILDREN:

Content specifically geared to young

viewers ages 2-6.

FOR AGE 7 AND OLDER:

May contain mild physical or comedic

violence which may frighten children

under 7.

GENERAL AUDIENCE:

Contains little or no violence, strong

language, or sexual dialogue or

situations.

PARENTAL GUIDANCE:

May contain infrequent coarse

language, limited violence, some

suggestive sexual dialogue and

situations.

PARENTS CAUTIONED:

May contain sophisticated themes,

sexual situations, strong language,

and more intense violence.

MATURE AUDIENCE:

May contain mature themes, profane

language, graphic violence, and

sexual situations.

US TV PROGRAMS RATINGS: Chart 2

Blocking Message

• If a program or

movie exceeds the

ratings you have

set, a message will

appear on a black

background and

sound is muted.

To View a Blocked Program/Movie

[Deactivate V-Chip Control]

Enter your secret code (steps 1-4 page

27). Then, set US MOVIES and/or US TV

PROGRAMS to “OFF” using

and SET.

(Ratings set on page 28 is retained and

will be in effect when V-Chip Control is

activated again.)

Enter Code

Process of V-Chip Control Feature

Setup

Blocking

US TV PROGRAMS RATINGS:Chart 1

US MOVIES RATINGS

RAT

I

NG

:

PG

-

1

3

PROGRAM

RAT

I

NG

EXCEEDED

ACTION

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

VOL

CH

VOL

10

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

SELECT

SET

LSQT0501_24p31.p65 10/31/2001, 9:21 PM29

30

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Audio/Video Menu

1

Press ACTION* to display MAIN MENU.

Video Menu

Audio Menu

a

Do steps 1 - 3 left.

This feature allows easy setting of picture and sound suitable for each program source.

1) Press to

select “VIDEO

MENU.”

2) Press SET to

select desired

mode.

(See below.)

b

c

Press ACTION three times

to end setup.

• The effects of this feature on the signal is not

output to the Audio/Video Output Connector.

• When AUDIO MENU mode is “AUTO,” the

AUDIO ADJUST setting will be “STANDARD.”

• AUDIO MENU settings remain in memory.

• VIDEO MENU settings do not remain in memory.

Notes

1) Press to

select “AUDIO

MENU.”

2) Press SET

repeatedly to

select desired

mode. (See below.)

4

5

Press ACTION three times

to end setup.

1) Press

to select “TV.”

2) Press SET to

display SET UP

TV screen.

2

1) Press to

select “SET UP

AUDIO/VIDEO.”

2) Press SET to

display.

3

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET

UP AUD

I

O/V

I

DEO

AUD

I

O MENU

:

MUSIC

AUD

I

O ADJUST

V

I

DEO MENU

:

NORMAL

V

I

DEO ADJUST

[Audio Menu]

■■

■ NORMAL

■■

■ AUTO [Audio AGC (Auto Gain Control)]

The sound level is automatically

adjusted to suit the program source

(see below).

■■

■ MOVIE

Sound suited to movies.

■■

■ MUSIC

Sound suited to music. (Factory setting)

■■

■ SPEECH

Sound suited to dialog.

[Video Menu]

■■

■ NORMAL

Factory setting.

■■

■ MOVIE

Picture is adjusted for a Movie-like feel.

■■

■ NIGHT

Color and picture intensity are

adjusted to be easier on the eyes for

night viewing.

Low

Standard

High

Volume level

TV TV

CD

AUDIO MENU : NORMAL

Volume level

Low

Standard

High

TV TV

CD

AUDIO MENU : AUTO

*Important: If a remote control button does not work

when pressed, press the TV button on

the remote and try the button again.

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

+

SKIP

PLAY

STOP

SLOW/SEARCH

SUB TITLE

ANGLE

ZOOM

AUDIO

CLEAR

ENTER

ACTION RETURN

S E T

SELECT

SET

ACTION

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET

UP TV

CAPT I ON

I

NPUT

SELECT

:

TUNER

SET

UP

AUD

I

O/V

I

DEO

SPEAKER

:

ON

R

E

MO

TE

W

A

R

N

I

NG

:

ON

DVD

VOL ADJUST

:

+ 1

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET

UP AUD

I

O/V

I

DEO

AUD

I

O MENU

:

MUSIC

AUD

I

O ADJUST

V

I

DEO MENU

:

NORMAL

V

I

DEO ADJUST

LSQT0501_24p31.p65 10/17/2001, 9:42 AM30

31

DVD Operation

Advanced Operation

Audio/Video Adjustment

1

Press ACTION to display MAIN

MENU.

Audio Adjustment

Video Adjustment

6

Press ACTION four times

to end setup.

1) Press

to select “TV.”

2) Press SET to

display SET

UP TV screen.

2

1) Press to

select “SET

UP AUDIO/

VIDEO.”

2) Press SET to

display.

3

1) Press to

select “VIDEO

ADJUST.”

2) Press SET to

display.

4

To Reset VIDEO Controls,

Press and SET to select and set

“STANDARD.” All controls return to their

factory settings.

5

1) Press to

select an item.

(See below.)

2) Press to

adjust.

Press ACTION four times

to end setup.

d

a

b

c

1) Press to

select “AUDIO

ADJUST.”

2) Press SET to

display.

1) Press to

select an item.

(See below.)

2) Press

to

adjust.

To Reset AUDIO Controls,

Press and SET to select and set

“STANDARD.” All controls return to their

factory settings.

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

CO

L

OR

T

I

NT

B

R

I

GH

T

N

E

SS

P

I

C

T

UR

E

SH

A

R

P

N

E

SS

ST

A

N

D

ARD

ADJUST

:

SE

L

E

C

T

:

END

:

ACT

I

O

N

V

I

DEO ADJUST

Do steps 1 - 3 left.

BASS

TREBLE

BALANCE

ST

A

N

D

ARD

ADJUST

:

SE

L

E

C

T

:

END

:

ACT

I

O

N

AUDIO ADJUST

[AUDIO Adjustment]

■■

■ BASS Control

To adjust the intensity of low

frequency sound.

■■

■ TREBLE Control

To adjust the intensity of high

frequency sound.

■■

■ BALANCE Control

To adjust the (L/R) unit speaker

output level.

• The levels set here do not affect other

audio equipment when connected to

the Audio Output L/R Connector.

[VIDEO Adjustment]

■■

■ COLOR Control

Adjust color intensity.

■■

■ TINT Control

Adjust for natural flesh tones.

■■

■ BRIGHTNESS Control

Adjust picture brightness.

■■

■ PICTURE Control

Adjust picture intensity by adjusting

both contrast and color level in the

proper balance.

■■

■ SHARPNESS Control

Adjust picture sharpness.

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET

UP AUD

I

O/V

I

DEO

AUD

I

O MENU

:

MUSIC

AUD

I

O ADJUST

V

I

DEO MENU

:

NORMAL

V

I

DEO ADJUST

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET

UP AUD

I

O/V

I

DEO

AUD

I

O MENU

:

MUSIC

AUD

I

O ADJUST

V

I

DEO MENU

:

NORMAL

V

I

DEO ADJUST

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET

UP TV

CAPT I ON

I

NPUT

SELECT

:

TUNER

SET

UP

AUD

I

O/V

I

DEO

SPEAKER

:

ON

R

E

MO

TE

W

A

R

N

I

NG

:

ON

DVD

VOL ADJUST

:

+ 1

LSQT0501_24p31.p65 10/17/2001, 9:42 AM31

32

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Disc Operation

• When closed captioning is used along with subtitles, they

may overlap. If so, turn one function off. (See page 20 ~ 21.)

• If after several presses of the button the language does

not change, language selection is not offered on the disc.

• Subtitles may not change to the selected language immediately.

• When power is turned on again or disc is removed, subtitles

revert to initial setting language. If the initial language is not

recorded on the disc, the disc’s priority language will appear.

You can select a different subtitle language (if offered) than the

one set at the Settings for DVD Operation. (See page 41.)

1) Press to select

desired language.

2) Press

(or ) to set.

3) Press (or ) to

select “ON” or “OFF.”

Subtitle Language (DVD only)

• Display disappears after 5

seconds.

• When no subtitles are offered,

“-” will be displayed instead of

the language number.

Press SUB TITLE*

in Play mode to display

the subtitle selection

on-screen.

[Subtitle Language (No.)]

[Audio Soundtrack Language (No.)]

• Change the No. by pressing ,

and press SET.

Ready Checklist

Please read “Basic DVD Operation”

on page 16.

You can change the audio soundtrack language, selected at

the Settings for DVD Operation, to a different language if

available. (See page 41.) (This operation works only with discs

on which multiple audio soundtrack languages are recorded.)

Press AUDIO in Play

mode to display the audio

selection on-screen.

Audio Soundtrack Language (DVD only)

Audio attribute 1 type, sampling

frequency, bit No. of the disc.

[Audio Attribute 1 type, Sampling

Frequency, Bit No. of the Disc

(see page 42)]

1

2

a

b

Number of subtitle language being played back.

1) Press to select

desired language.

Number of the audio

soundtrack language being

played back.

• If, after several presses of the AUDIO

button the language does not change,

language selection is not offered on the disc.

• When power is turned on again or disc is

removed, language reverts to initial setting.

If this language is not recordedon the disc,

the language recorded will be heard.

Notes

• Display disappears after 5

seconds.

Te amo

AUDIO:1 ENG

Dolby Digital 3/2.1ch

SELECT : SET:SET

Hello

AUDIO:3 ESP

Dolby Digital 3/2.1ch

SELECT : SET:SET

Hola

ENG English

FRA French

DEU German

ITA Italian

ESP Spanish

NLD Dutch

SVE Swedish

NOR Norwegian

DAN Danish

POR Portuguese

RUS Russian

JPN Japanese

CHI Chinese

KOR Korean

MAL Malay

VIE Vietnamese

THA Thai

∗ Other

16bit

20bit

24bit

96KHz

or

48KHz

Linear PCM

Disc

LPCM

Dolby

Digital

DTS

Dolby Digital

Disc

1ch - 5.1ch

1ch - 5.1ch DTS Disc

LSQT0501_32p43.p65 10/17/2001, 10:15 AM32

33

Advanced Operation

*Important: If a remote control button does not work when pressed, press the DVD button

on the remote and try the button again.

When appears on the screen while

a button is being operated, it means

that the corresponding operation is

prohibited by the unit or the disc.

• ANGLE Indicator lights up on the

unit when a scene recorded at

different angles is detected.

• The angle number can be set

beforehand so that the angle is

switched whenever ANGLE

Indicator lights up.

ANGLE Indicator

a

Press AUDIO in Play mode to display the

audio screen.

Vocal Selection for Karaoke Discs (DVD/Video CD)

DVDs may contain scenes shot from multiple camera angles

allowing the same scene to be viewed at different angles. You

can view these angles, if available, using the ANGLE button.

1

Press ANGLE in Play

mode to display the angle

selection on-screen.

• Display disappears after 5

seconds.

Multiple Angle Viewing (DVD only)

2

Press to select the

desired angle.

b

1)Press (or ) to

select as shown below.

2)Press (or ) to set.

(DVD only)

Number of angle being

played back.

You can enlarge specific portions of a picture and select

the zoom ratio using the ZOOM button on the remote

during DVD playback.

Set Zoom size.

Press ZOOM repeatedly to change display as follows.

• You can enlarge the center portion of the image to one

of 2 magnifications.

Picture Zoom (DVD only)

• Closed captioning will not be

displayed while Picture Zoom is

used. To see subtitles, set the

subtitle feature to ON (see page 32).

• The subtitle cannot be enlarged nor

can it’s position be changed.

• The picture zoom feature does not

work with a Video CD.

• During picture zoom, “ZOOM1” or

“ZOOM2” is displayed on-screen.

• Zooming, on some discs, may result

in poor picture quality, or not operate.

■ Use the , , and buttons to move the position up,

down, left and right.

Notes

X 1.0 (ORIGINAL)

1st press

2nd press

3rd press

X 1.5 (ZOOM 1) X 2.0 (ZOOM 2)

Hello!

ZOOM 1

ZOOM 2

SUB TITLE

ANGLE

AUDIO

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

+

SKIP

PLAY

STOP

SLOW/SEARCH

SUB TITLE

ANGLE

ZOOM

AUDIO

CLEAR

ENTER

ACTION RETURN

S E T

SELECT

ZOOM

LSQT0501_32p43.p65 9/28/2001, 12:38 PM33

34

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

ACTION

NUMBER Keys

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

VOL

CH

VOL

10

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

SELECT

SET

Disc Operation (continued)

DISPLAY

Some DVDs have more than one title, e.g. movies. If the

disc offers a title menu, you can select the desired title

number. (Operation may vary according to the disc.)

1

Press TITLE* in Play

mode to display title

screen.

Title menu (DVD only)

• Pressing TITLE again

resumes play from the

scene when TITLE was

first pressed.

DVDs may offer a special menu. This menu may include

guides to unique contents, audio/subtitle languages, etc.

Although contents and operation may vary, the following

steps show basic steps for using the menu.

a

b

Press MENU in Play

mode to display DVD

menu.

• Pressing MENU again

resumes play from the

scene when MENU was

first pressed.

1) Press or

number key(s) to

select an item.

2) Press SET or PLAY

to access.

• Step 2) not necessary

when using Number

Key(s).

DVD menu (DVD only)

2

1) Press or

number Key(s) to

select a title.

2) Press SET or PLAY

to start play.

• Step 2) not necessary

when using Number Key(s).

Repeat step “b” if more

than one menu.

MENU

CLEAR

TITLE

T

I

TLE MENU

Cas

t

l

es

Love

r

s

Dogs

B

i

r

ds

DVD MENU

3 . ANGLE

1 . SUBT I TLE

2 . AUD

I O

DVD MENU

3 . ANGLE

1 . SUBT

I

TLE

2 . AUD

I

O

B

i

rds

of the world

T

I

TLE MENU

Cas

t

l

es

Love

r

s

Dogs

B

i

r

ds

LSQT0501_32p43.p65 9/28/2001, 12:38 PM34

35

Advanced Operation

*Important: If a remote control button does not work when pressed, press the TV, DVD button

on the remote and try the button again.

• Up to 15 tracks can be programmed.

•“ ” or “ ” (depending on disc) indicates additional

PROGRAM PLAY screen. Press for next or

previous screen.

• To clear the last program one by one,

Press to move to “CLEAR LAST” and press

SET. (Pressing CLEAR also clears last program.)

• To clear all programs,

Press to move to “CLEAR ALL” and press

SET. (Programs are also cleared when the power is

turned off or the disc is removed.)

You can program specific tracks and order of play.

Program Play (Video CD/CD)

Ready Checklist

Unit is in TV mode, press TV.

Video CD or CD is inserted.

1

Press ACTION in Stop mode to display

MAIN MENU.

6

1) Press to

select “START.”

2) Press SET to start

play of programs in

the sequence

selected.

• To cancel, press STOP

during play, then press

CLEAR.

Program Repeat Play

(Video CD/CD)

d

Press SET to enter Select mode.

(“REPEAT OFF” will flash.)

e

Press to select “DISC

REPEAT.”

(Unit Information Screen)

a

Do steps 1 through 6 on this

page.

b

Press DISPLAY to display

Disc Information screen.

(Disc Information Screen)

c

Press DISPLAY again to

display Unit Information screen.

f

Press SET to set mode. (“DISC

REPEAT” stops flashing.)

To cancel, select “REPEAT

OFF” in step e, then press SET.

2

1) Press to

select “DVD.”

2) Press SET to

display screen.

3

1) Press to select

“PLAY MODE.”

2) Press SET to

display screen.

4

1) Press to select

“PROGRAM PLAY.”

2) Press SET to

display screen.

5

1) Press to

select a track

number. (Track

numbers on disc

are displayed.)

2) Press SET to set.

• Repeat step 5 to select another track.

• The selected track is added on the right side.

Notes

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

D

V

D MA

I

N

MENU

SELECT :

SET : SET

END : ACTION

D

I

SC

L

ANGUAGES

A

UD

I

O

OU

TP

U

T

ST

I

LL

MODE

:

F

I

ELD

TV

MODE

:

L

e t t

e

r

b

o

x

PLAY

MODE

PLAY MODE

SELECT :

SET : SET

END : ACTION

PROGRA

M

PLAY

RANDO

M

PLAY

P

ROGRAM

PLAY

SELECT :

SET : SET

END : ACTION

DISC

P

ROGRAM

1 61116 5 8

2 7 12 17 15 6

3 8 13 18 1 13

4 9 14 19 3 2

5101520 2

CLEAR LAST

CLEAR ALL START

P

ROGRAM

PLAY

SELECT :

SET : SET

END : ACTION

DISC

P

ROGRAM

1 61116 5 8

2 7 12 17 15 6

3 8 13 18 1 13

4 91419 3 2

5101520 2

CLEAR LAST

CLEAR ALL START

START

SET : SET NEXT :DISPLAY

TRA

CK

:

1

V

I

DE

O

CD

PBC

:

O

FF

1:

35

:

12

SET : SET END : DISPLAY

PLAY

RE

PE

AT

O

FF

P

ROGRAM

PLAY

SET : SET END : DISPLAY

PLAY

D

I

S

C

RE

PE

AT

P

ROGRAM

PLAY

LSQT0501_32p43.p65 9/28/2001, 12:38 PM35

36

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Tracks are played in a random order.

Random Play (Video CD/CD)

Press ACTION* in Stop mode to display

MAIN MENU.

1

1) Press

to select “DVD.”

2) Press SET to

display screen.

2

1) Press to select

“PLAY MODE.”

2) Press SET to

display screen.

3

1) Press to select

“RANDOM PLAY.”

2) Press SET to begin

random play.

• To cancel, press STOP

during play, then press

CLEAR.

4

Disc Operation (continued)

*Important:

If a remote control button does not

work when pressed, press the TV,

DVD button on the remote and try

the button again.

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

D

V

D MA

I

N

MENU

SELECT :

SET : SET

END : ACTION

D

I

SC

L

ANGUAGES

A

UD

I

O

OU

TP

U

T

ST

I

LL

MODE

:

F

I

ELD

TV

MODE

:

L

e t t

e

r

b

o

x

PLAY

MODE

PLAY MODE

SELECT :

SET : SET

END : ACTION

PROGRA

M

PLAY

RANDO

M

PLAY

ACTION

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

VOL

CH

VOL

10

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

SELECT

SET

STOP

CLEAR

LSQT0501_32p43.p65 9/28/2001, 12:38 PM36

37

Advanced Operation

1

Press DISPLAY in Play or Stop mode to

display “On-Screen Display.”

• Each press of DISPLAY changes the on-screen

display as follows. (Please refer to page 38 or 39.)

When DISPLAY is pressed, On-Screen Displays

show disc information (title/chapter/track number,

elapsed playing time) and unit information

(repeat play, Play mode).

Ready Checklist

Unit is in DVD mode, press DVD.

• DISPLAY button does not function while DVD

TITLE MENU is displayed.

Note

3

1) Press to select the setting.

2) Press SET to set.

• For some functions the setting will be registered

immediately without pressing SET.

• When numbers are displayed (e.g. title number),

the Number Keys are also available.

To make corrections,

press

and SET repeatedly to move to

error, then correct.

• Pressing is effective for elapsing time instead

of the above buttons. Press repeatedly to delete

the error, then correct.

To return to the normal screen,

press CLEAR or DISPLAY repeatedly.

2

1) Press (or ) to select an item.

2) Press SET to set.

• When DISPLAY is pressed

during playback of a Video CD

with Playback control, the

Number Keys are not available

on the displayed screen. In this

case, press DISPLAY again to

remove the displayed screen.

• When appears on the screen

while a button is being operated,

it means that the corresponding

operation is prohibited by the

unit or the disc.

>

Selected disc information

Selected unit information

Normal Screen

Notes

DVD Operation Using On-Screen Displays

-> ->

SELECT:

SET : SET NEXT :DISPLAY

TI

TLE

:

12

DVD

CHA

PT

ER

:

11

0

:

12

:

34

SELECT:

SET : SET NEXT :DISPLAY

TI

TLE

:

12

DVD

CHA

PT

ER

:

24

0

:

12

:

34

SET : SET NEXT :DISPLAY

TRA

CK

:

12

V

I

DE

O

CD

PBC

:

O

FF

0:

12

:

34

SET : SET NEXT :DISPLAY

TRA

CK

:

17

V

I

DE

O

CD

PBC

:

O

FF

0:

12

:

34

NUMBER

Keys

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

VOL

CH

VOL

10

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

SELECT

SET

DISPLAY

CLEAR

LSQT0501_32p43.p65 9/28/2001, 12:38 PM37

38

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

DVD Operation Using On-Screen Displays (continued)

Detailed Descriptions of Each On-Screen Display

Disc Information Screen (for DVD)

1. TITLE No.

• Change the No. by pressing * or

the Number Keys, and press SET.

2. Chapter No.

• Change the No. by pressing or

the Number Keys, and press SET.

3. Disc currently being played

4. Elapsed playing time

The screen may be changed by

selecting the elapsed time.

• Change the elapsed time by pressing

Number Keys, and press SET.

For “01 : 23 : 45,” press 0 -> 1 -> 2 -> 3 -> 4 -> 5

• This function does not work with some discs.

• Track No. and elapsed playing time are not

displayed during play started from menu of

Video CDs with playback control.

• When appears on the screen while a button is

being operated, it means that the corresponding

operation is prohibited by the unit or the disc.

Disc Information Screen (for Video CD/ CD)

A

.Track No.

• Change the No. by pressing or

the Number Keys, and press SET.

B

.Playback control ON/OFF

[Video CD with playback control only]

C

.Disc currently being played

D

.Elapsed playing time

Notes

3

4

A

B

SELECT:

SET : SET NEXT:DISPLAY

TI

TLE

:

12

DVD

CHA

PT

ER

:

11

0

:

12

:

34

1

2

SET : SET NEXT:DISPLAY

TRA

CK

:

12

V

I

DE

O

CD

PBC

:

O

FF

0:

12

:

34

C

D

NUMBER Keys

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

+

VOL

CH

VOL

10

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

SELECT

SET

ON

OFF

Video CD menu play is displayed.

Video CD menu play is cleared.

Video CD CD

LSQT0501_32p43.p65 9/28/2001, 12:38 PM38

39

Advanced Operation

*Important: If a remote control button does not work when pressed, press the DVD button

on the remote and try the button again.

• CHAPTER/TITLE REPEAT PLAY

(DVD)

• TRACK/DISC REPEAT PLAY

(Video CD/CD)

a. Repeat Play

Detailed Descriptions of Each On-Screen Display

Unit information screen

• Change the desired mode during play by pressing , and press SET.

b.Play mode [Video CD/ CD only]

(See pages 35 - 36.)

a

SELECT:

SET :

SET

END

:

D

I

SPLAY

PLAY

CHA

PTER

REPEAT

Video CD/CD

TRACK REPEAT

DISC REPEAT

REPEAT OFF

DVD

CHAPTER REPEAT

TITLE REPEAT

REPEAT OFF

PROGRAM PLAY

RANDOM PLAY

-

program play

random play

normal play

SET : SET END :DISPLAY

PLAY

D

I

S

C

RE

PE

AT

P

ROGRAM

PLAY

b

TITLE

chapter

CHAPTER REPEAT

TITLE REPEAT

NORMAL PLAY

CURRENT PLAYBACK POSITION

track

TRACK REPEAT

DISK REPEAT

NORMAL PLAY

CURRENT PLAYBACK POSITION

LSQT0501_32p43.p65 9/28/2001, 12:38 PM39

40

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

DVD Lock Feature

*Important:If a remote control button does not work

when pressed, press the TV, DVD button

on the remote and try the button again.

1

1) Press * to select

“DVD LOCK.”

2) Press SET to set

“ON” or “OFF.”

DVD Lock Ratings (DVD only)

■ “ON” -> DVD Lock is activated.

■ “OFF” -> DVD Lock is deactivated.

LEVEL 1:LOCK ALL: Playback of all DVDs, CDs and Video

CDs is prohibited. (Use to prohibit play of mature

theme DVDs not encoded with rating level.)

LEVEL 2: DVDs expressly for children can be played back.

LEVEL 3 to 7:

DVDs for general audiences/children can be

played back. (DVDs with mature content are

prohibited.)

LEVEL 8: NO LIMIT: (Factory preset)

All DVDs can be played back.

You can prevent playback of DVDs in a specific rating level which may be unsuitable for children.

• Some DVDs are encoded with a rating level. If the disc rating is higher (stricter) than the one you

preset, playback will be prohibited.

• Ratings which are highlighted in Green will be blocked;

those not highlighted (white letters) will not be blocked.

Perform DVD Lock setting in TV mode.

Enter your secret code to display LOCK menu.

(Do “Secret Code” steps on page 27.)

Discs not encoded with rating level will play even

if the jacket states it is for mature audiences. For

these discs, the DVD Lock Ratings will not work.

Caution

2

1) Press to select

“CHANGE SETTINGS.”

2) Press SET to display

screen.

3

1) Press to

select rating level.

2) Press SET to select

“LOCKED” or

“UNLOCKED.”

4

Press ACTION three times to end setup.

To change DVD LOCK settings

After entering your secret code

in step 3 on page 27, select

“OFF” to deactivate DVD Lock

or change the rating level.

ACTION

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

VOL

CH

VOL

10

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

SELECT

SET

US MOV

I

ES

:

O

FF

CHANGE

SET

T

I

NGS

US

TV

PROGRAMS

:

O

FF

CHANGE

SET

T

I

NGS

DVD

LOCK

:

O

FF

CHANGE

SET

T

I

NGS

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

LOCK

US MOV

I

ES

:

O

FF

CHANGE

SET

T

I

NGS

US

TV

PROGRAMS

:

O

FF

CHANGE

SET

T

I

NGS

DVD

LOCK

:

O

FF

CHANGE

SET

T

I

NGS

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

LOCK

LOCK ALL

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

1

2

3

4

5

6

7

8

UNLOCKED

SELECT:

SET : SET END : DISPLAY

DISC PLAYBACK IS LOCKED.

LSQT0501_32p43.p65 10/31/2001, 9:28 PM40

41

Advanced Operation

Settings for DVD Operation

Disc Language (DVD only)

To select and set the language of the audio soundtrack,

subtitles, or title/DVD menus for all discs to be played.

“AUDIO” selections

To select the audio soundtrack language.

(factory preset: English)

English/Spanish/French

Original: Original disc language

Other ✱✱✱✱: Other language selection*1

“SUBTITLE” selections

To select the subtitle language.

(Factory preset: AUTO)

AUTO: Same language selected for

“AUDIO”

• If language set for “AUDIO” is used in

playback, subtitles will not appear.

• If another language is used during

playback, the subtitles will appear in the

language selected at “AUDIO” setup.

English/Spanish/French

Other ✱✱✱✱: Other language selection*1

“MENUS” selections

(Factory preset: English)

To select the language used in

title menus or DVD menus.

English/Spanish/French

Other ✱✱✱✱: Other language selection*1

To enter OTHER ✱✱✱✱

code number,

Press number keys (Please refer to

language codes on page 46).

To make corrections,

press repeatedly to delete language

code number, and correct.

1

3

Once initial settings are done, they remain

in memory (even after the power is off) until

changed. This means the unit will always

operate under the same conditions

(especially DVDs) each time.

DISC LANGUAGES (See below.)

Any languages offered on the disc can be set.

If a language not offered is set, the original

disc language will be selected.

AUDIO OUTPUT (See page 42.)

You can set the audio output that comes

from the digital audio output terminal.

STILL MODE (See page 43.)

To select “FIELD” or “FRAME” to prevent jitter

or to make small text or fine patterns clearly

visible in a still picture. When “AUTO” is set,

“FIELD” or “FRAME” is selected automatically.

TV MODE (See page 43.)

To select whether the video material for a wide-screen will

be played back in Pan & Scan style or in Letterbox style.

Ready Checklist

Unit is in TV mode, press TV.

4

1) Press to

select “DISC

LANGUAGES.”

2) Press SET to

display screen.

Press ACTION in Stop mode

to display MAIN MENU.

1) Press to

select an item.

2) Press SET to set.

2

1) Press

to select “DVD.”

2) Press SET to

display screen.

1) Press to

select an item.

2) Press SET

repeatedly for

desired language.

(Please refer right.)

5

6

Press ACTION to redisplay DVD menu

and go to step 3 to setup another item.

Or, press ACTION three times to exit.

*

1

If the selected language is not offered,

the original disc language is selected.

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

DVD MAIN MENU

SELECT :

SET : SET

END : ACTION

DI

SC LANGUAGES

AUDIO OUTPUT

STI LL MODE : AUTO

TV MODE : Let te rbo x

DISC LANGUAGES

SELECT :

SET : SET

END : ACTION

AU

DI

O : English

English

SUBTI TLE : AUTO

MENUS : English

DVD MAIN MENU

SELECT :

SET : SET

END : ACTION

DI

SC LANGUAGES

AUDIO OUTPUT

STI LL MODE : AUTO

TV MODE : Le tte rb ox

For Your Information

LSQT0501_32p43.p65 10/18/2001, 10:00 AM41

42

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

• Make settings according to amplifier

connected to optical audio output as shown in

above table.

• When a dts decoder is not connected, to

enjoy dts DVD, please select audio output

other than dts at the dts DVD menu screen.

Otherwise, there will be no sound from the

unit speakers.

*1 Audio output from unit is converted to 48

kHz/16 bit in addition to audio from digital

audio output. To enjoy high quality sound at

48 kHz/20 bit /24 bit or 96 kHz, connect the

amplifier or decoder directly to the audio

output connectors, not to the digital audio

output connector. [Select “OFF” at the

“LPCM (DVD)”.]

*2 When connecting an amplifier (with an

optical digital input connector) which does

not contain the Dolby Digital or dts decoder,

be sure to select “OFF.” If “Bitstream” is

selected, starting DVD play may cause

such a high level of noise as to be harmful to

your ears and damage the speakers.

*3 When a dts decoder is connected, please

select “Bitstream” in “dts”. If “OFF” is

selected, there will be no sound.

AUDIO OUTPUT

Select the digital output to be output from the optical

digital audio output connector of the unit.

Do steps 1 and 2 on page 41.

■■

■ “LPCM (DVD)” selections

OFF: Linear PCM of less than 48 kHz/16 bit is

output. When playing DVDs recorded in linear

PCM of over 48 kHz/20 bit or 96 kHz, no

digital audio is output. (Factory preset)

PCM: When playing DVDs recorded in linear PCM of

48 kHz/20 bit/24 bit or 96 kHz, digital audio

converted to 48 kHz/16 bit is output. (Digital

output of PCM audio is restricted to 48 kHz/

16 bit or below for copyright protection.)

■■

■ “Dolby Digital” selections

Bitstream: Dolby Digital bitstream (1ch-5.1ch) is

output. (Factory preset)

OFF: No output.

■■

■ “dts” selections

Bitstream: dts bitstream is output. (Factory preset)

OFF: No output.

■■

■ “DRC (Dynamic Range Compression)” selections

OFF: Normal audio range is selected. (Factory

preset)

ON: For dynamic sound even at low volume, this

is useful for late-night listening. [Dolby Digital

DVDs only].

■■

■ “SURROUND” selections

Surround Sound creates the effect of sound coming

from non-existent rear speakers even when only

connected to a 2-channel stereo system.

OFF: No Surround Sound effect. (Factory preset)

ON:Surround Sound effect.

1) Press to

select an item.

2) Press SET

repeatedly for

output. (See below.)

1) Press * to

select “AUDIO

OUTPUT.”

2) Press SET to

display screen.

1

3

2

4

• Turn off other surround effects when using

this surround effect.

• For optimum effect, the distance between the

unit and the listener should be about 3 or 4

times the distance between the right and left

front speakers.

Notes

Press ACTION to redisplay DVD menu

and go to step 2 to setup another item.

Or, press ACTION three times to exit.

Settings for DVD Operation (continued)

Recommended setting

LPCM

(DVD)

OFF

PCM

*

1

PCM

*

1

PCM

*

1

Dolby

Digital

OFF

*

2

Bitstream

dts

OFF

*2

OFF

Bitstream

*1

No amplifier is connected

AV amplifier (with digital

audio input connector)

without Dolby Digital/dts

decoder

AV amplifier including

Dolby Digital decoder

AV amplifier including

Dolby Digital/dts decoder

Type of amplifier

to be connected

AUDIO OUTPUT

SELECT :

SET : SET

END : ACTION

LPCM(DVD)

: OFF

Dolby Digital : Bitstream

dts : OFF

DRC : OFF

SURROUND : OFF

DVD MAIN MENU

SELECT :

SET : SET

END : ACTION

DISC LANGUAGES

AU

DI

O OUTPUT

STI LL MODE : F

I

ELD

TV MODE : Let te rbo x

LSQT0501_32p43.p65 9/28/2001, 12:38 PM42

43

Advanced Operation

STILL MODE

1

1) Press to select

“STILL MODE.”

2) Press SET repeatedly

for mode. (See below)

2

Do steps 1 and 2 on page 41.

AUTO: “FIELD” (Field still) or “FRAME” (Frame still) is

automatically selected during the still mode.

(Factory preset)

FIELD: “FIELD” (Field still) is always selected.

This setting will reduce jitter when compared with

“AUTO” on some discs.

FRAME:“FRAME” (Frame still) is always selected.

Some texts and fine patterns will be seen clearly

when compared with “AUTO” on some discs.

Selecting TV MODE

a

1) Press to select

“TV MODE.”

2) Press SET

repeatedly for mode.

(See below.)

b

Do steps 1 and 2 on page 41.

Pan & Scan : Widescreen video data is played in Pan & Scan

style (left and right of screen is trimmed.)

• Video data not formatted in Pan & Scan will

play in letterbox style.

Letterbox : Widescreen video data is played in Letterbox

style (top and bottom of screen has black

margin).

Set the screen display style for widescreen video material

playback.

• Pan & Scan (Factory preset)

• Letterbox

Set to reduce jitter in a displayed still picture or a motion picture.

3

Press ACTION twice to exit this mode.

c

Example

(Factory preset)

*Important: If a remote control button does not work when pressed, press the DVD button

on the remote and try the button again.

ACTION

LIGHT

TITLE MENU

DISPLAY

ADD/DLT

PAUSE

DSS

CABLE

+

SKIP

PLAY

STOP

SLOW/SEARCH

+

VOL

CH

VOL

10

SUB TITLE

ANGLE

ZOOM

AUDIO

OPEN/CLOSE

CLEAR

ENTER

M

U

T

E

S

U

R

O

U

N

D

T

I

M

E

R

-

T

U

N

E

ACTION RETURN

D V DTV

S E T

SELECT

SET

DVD MAIN MENU

SELECT :

SET : SET

END : ACTION

DISC LANGUAGES

AUDIO OUTPUT

STI

TI

LL

MODE

: F

I

ELD

TV MODE : Le tte rb ox

DVD MAIN MENU

SELECT :

SET : SET

END : ACTION

DISC LANGUAGES

AUDIO OUTPUT

STI LL MODE : F

I

LED

TV MODE : Letterbox

For Your Information

LSQT0501_32p43.p65 10/18/2001, 10:01 AM43

44

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Before Requesting Service

Remote Control

Unit cannot be controlled...

ACTION, SELECT, SET, POWER,

etc. buttons cannot be selected...

Correction

• Aim Remote directly at the remote sensor on the unit. (P. 9)

• Avoid any object blocking signal path.

• Inspect the remote batteries. (P. 4)

• Exposing unit remote sensor to direct fluorescent or outdoor

light may cause signal interference.

• Press TV for TV mode. (P. 24)

• Press DVD for DVD mode. (P. 24)

• Check remote batteries.

Check the following points once again if you are having trouble with your unit.

Power

No power…

Power turns itself off...

Monitor

No picture or sound...

Poor picture with normal sound...

Poor sound with normal picture...

Poor TV reception...

No color or poor color...

Ghost (multiple) images...

TV programs cannot be watched...

Correction

• Make sure your antenna system (TV or CABLE), is

correctly set. (P. 10)

• Completely insert Power Plug into an AC outlet.

• Set POWER button to ON.

• Adjust BRIGHTNESS, SHARPNESS, and PICTURE

controls in the SET UP Video Adjustment. (P. 31)

• Adjust VOLUME control. (P. 18)

• Adjust SHARPNESS and PICTURE controls in the SET UP

Video Adjustment. (P. 31)

• Adjust TINT and COLOR controls in the SET UP Video

Adjustment. (P. 30, 31)

• Install a directional antenna.

• Make sure the selected channel is in unit’s memory. (P. 12)

Correction

• Completely insert Power Plug into an AC outlet.

• Set POWER button to ON.

• Auto power-off (shutoff) occurs after about 5 min. in DVD

mode with no operation, or if there is no broadcast signal in

TV. Turn the power back on. (P. 17, 27)

If you cannot resolve the problem, please call the Customer Call Center for product

assistance at 1-800-211-PANA (7262.)

To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262.)

or send e-mail to : [email protected]

LSQT0501_44p56.p65 11/1/2001, 4:53 PM44

45

For Your Information

DVD/Video CD/CD

Play fails to start even when

PLAY is pressed...

Play starts but then stops

immediately...

Picture is distorted during rapid

advance or rapid reverse...

No Forward/Reverse search

play...

Play does not start even when

title is selected...

Audio soundtrack and/or

subtitle language is not the one

selected at the initial settings...

No subtitles...

Alternative audio soundtrack

(or subtitle) language cannot

be selected...

Angle cannot be changed...

Correction

• This unit cannot play discs other than DVDs, Video CDs and CDs.

• The disc may be dirty and require cleaning.

• Be sure disc is installed with label side up.

• The picture will be somewhat distorted at times: this is normal.

• Some discs may have sections which prohibit Forward/Reverse

search. (P. 17)

• Confirm the “DVD LOCK” setting. (P. 40)

• If the audio soundtrack and/or subtitle language selected at DVD

initial settings does not exist on the disc, it will not be accessible.

• Subtitles appear only when available on disc.

• Select “ON” at the “subtitle language” section (P. 32) to display

subtitles.

• Alternative language cannot be selected with discs which do not

contain more than one language.

• For some discs, alternative language cannot be selected with the

AUDIO or SUB TITLE button. Try selecting it from the DVD menu

if available.

• This function is dependent on software availability. Even if disc

has multiple angles, they may be recorded for specific scenes

only (ANGLE Indicator on unit lights up). (P. 33)

Correction

• First, unplug unit. Then, prepare a rigid wire (e.g. an extended

paper clip, etc.) and, applying moderate force, insert it straight

into the hole at the base of the tray. The tray will eject a little.

Now, pull the tray all the way out and remove the disc. (P. 7)

Miscellaneous

The disc cannot be removed...

Warning and Instruction Displays

These displays will alert you of a missed operation or provide further instructions.

OSD

NO CH FOUND PLEASE CHECK

ANTENNA CABLE CONNECTION THEN

PRESS CH UP KEY AGAIN

PLEASE SET CLOCK

BEFORE TIMER SETTING

PLEASE CHECK THE DISC, AND FOR

STAINS OR SCRATCHES ON DISC

Caution

• If no active channels are found for

CHANNEL MEMORY...

• If you attempt to set or review a set the

On-Timer and the Clock is not set...

• If you press PLAY, or the unit reads

data from a stained or scratched disc

in DVD mode. Also, if the type of disc is

other than DVD, Video CD or CD...

Page

10

12

4

LSQT0501_44p56.p65 10/17/2001, 10:32 AM45

46

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Language Code List

Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/or

“MENUS” (see page 45).

Code Language

7079 Faroese

7082 French

7089 Frisian

7165 Irish

7168 Scots Gaelic

7176 Galician

7178 Guarani

7185 Gujarati

7265 Hausa

7273 Hindi

7282 Croatian

7285 Hungarian

7289 Armenian

7365 Interlingua

7378 Indonesian

7383 Icelandic

7384 Italian

7387 Hebrew

7465 Japanese

7473 Yiddish

7487 Javanese

7565 Georgian

7575 Kazakh

7576 Greenlandic

7577 Cambodian

7578 Kannada

7579 Korean

7583 Kashmiri

7585 Kurdish

7589 Kirghiz

7665 Latin

Code Language

7678 Lingala

7679 Laothian

7684 Lithuanian

7686 Latvian,

Lettish

7771 Malagasy

7773 Maori

7775 Macedonian

7776 Malayalam

7778 Mongolian

7779 Moldavian

7782 Marathi

7783 Malay

7784 Maltese

7789 Burmese

7865 Nauru

7869 Nepali

7876 Dutch

7879 Norwegian

7982 Oriya

8065 Panjabi

8076 Polish

8083 Pashto, Pushto

8084 Portuguese

8185 Quechua

8277 Rhaeto-Romance

8279 Romanian

8285 Russian

8365 Sanskrit

8368 Sindhi

8372 Serbo-Croatian

8373 Singhalese

Code Language

8375 Slovak

8376 Slovenian

8377 Samoan

8378 Shona

8379 Somali

8381 Albanian

8382 Serbian

8385 Sundanese

8386 Swedish

8387 Swahili

8465 Tamil

8469 Telugu

8471 Tajik

8472 Thai

8473 Tigrinya

8475 Turkmen

8476 Tagalog

8479 Tonga

8482 Turkish

8484 Tatar

8487 Twi

8575 Ukrainian

8582 Urdu

8590 Uzbek

8673 Vietnamese

8679 Volapük

8779 Wolof

8872 Xhosa

8979 Yoruba

9072 Chinese

9085 Zulu

Code Language

6565 Afar

6566 Abkhazian

6570 Afrikaans

6577 Ameharic

6582 Arabic

6583 Assamese

6588 Aymara

6590 Azerbaijani

6665 Bashkir

6669 Byelorussian

6671 Bulgarian

6672 Bihari

6678 Bengali,

Bangla

6679 Tibetan

6682 Breton

6765 Catalan

6779 Corsican

6783 Czech

6789 Welsh

6865 Danish

6869 German

6890 Bhutani

6976 Greek

6978 English

6979 Esperanto

6983 Spanish

6984 Estonian

6985 Basque

7065 Persian

7073 Finnish

7074 Fiji

LSQT0501_44p56.p65 9/28/2001, 1:05 PM46

47

For Your Information

As of June 2001

For Product Information, Operating Assistance, Literature Request, Dealer Locations,

and all Customer Service inquires please contact:

1-800-211-PANA(7262), Monday-Friday 9am-9pm Saturday-Sunday 9am-7pm, EST.

or send e-mail : [email protected]

Service in Puerto Rico

Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/ Factory Servicenter:

Ave. 65 de Infanteria. Km. 9.5 San Gabriel Industrial Park Carolina, Puerto Rico 00985

Phone (787) 750-4300 Fax (787) 768-2910

GEORGIA

8655 Roswell Road

Suite 100

Atlanta, GA 30350

ILLINOIS

1709 North Randall Road

Eligin, IL 60123

MASSACHUSETTS

60 Glacier Drive,

Suite G

Westwood, MA 02090

CALIFORNIA

6550 Katella Avenue

Cypress, CA 90630

800 Dubuque Avenue

S. San Francisco,

CA 94080

3878 Ruffin Road

Suite A

San Diego, CA 92123

FLORIDA

3700 North 29th Avenue

Suite 102

Hollywood, FL 33020

MINNESOTA

7850-12th Avenue South

Airport Business Center

Bloomington, MN 55425

OHIO

2236 Waycross Road

Civic Center Plaza

Forest Park, OH 45240

PENNSYLVANIA

2221 Cabot Blvd. West

Suite B

Langhorne, PA 19047

TEXAS

13615 Welch Road

Suite 101

Farmers Branch,

TX 75244

WASHINGTON

20425-84th Avenue

South

Kent, WA 98032

HAWAII

99-859 Iwaiwa Street

Aiea, Hawaii 96701

Phone (808) 488-1996

Fax (808) 486-4369

Web Site: http://www.panasonic.com

You can purchase parts, accessories or locate your

nearest servicenter by visiting our Web Site.

Accessory Purchases:

1-800-332-5368 (Customer Orders Only)

Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032

(6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST)

(Visa, Master Card, Discover Card, American Express, Check)

Factory Servicenter Locations

Servicenter List

LSQT0501_44p56.p65 9/28/2001, 1:05 PM47

48

For Your Information

Spanish Quick Use Guide/Guía para rápida consulta

Conexión de la antena externa

Desenganche la antena del televisor o de la

videograbadora que tuviera anteriormente y

conéctela a la parte trasera de la unidad

Combinación TV/DVD, como se

muestra en el diagrama. Si el sistema de su

antena tiene conductores UHF y VHF

separados, usted necesita un mezclador de

banda UHF/VHF (no viene con el equipo.)

Conexiones de TV cable

Sin un decodificador de TV cable

Podrá;

• ver canales sin codificar.

No Podrá;

• ver canales codificados.

Con un decodificador de TV cable

Podrá;

•

ver cualquier canal incluso los canales codificados.

NOTA : El canal deberá ser seleccionado en el decodificador

de TV cable.

Para ver un canal codificado/ no codificado

Sintonice el canal del Registrador de la combinación de VCR/TV en

el canal de salida de la caja convertidora de televisión por cable

(por ejemple el canal 3.) Después, seleccione en el decodificador de

TV cable el canal que se quiera ver.

Con un receptor DSS

Podrá;

• ver cualquier canal incluso los canales

codificados.

NOTA : El canal deberá ser seleccionado en el receptor

DSS.

NOTA : El receptor DSS debe estar apagado para ver

programas desde un decodificador de TV cable o

desde la antena. Consulte el manual del receptor

DSS para más detalles.

Antena

o

Cable TV

VHF/

UHF

Antena

o

Cable TV

VHF/

UHF

OUTIN

ADVERTENCIA:

Al utilizar cables coaxiales RF del “Tipo

tuerca”, solo debe apretarse con los dedos.

Si se aprieta demasiado los cables pueden

resultar dañados.

O

Satellite

Antena

o

Cable TV

VHF/

UHF

OUT

IN

Parte trasera de la unidad

combinación TV/DVD

(Plano) Cable

bifubular de 300

ohmios

Mezclador de banda

UHF/VHF (no está

incluido)

(Redondo) Cable

coaxial de 75 ohmios

desde la

antena

Transformador de 300-75

ohmios (no está incluido)

(Plano) Cable

bifubular de 300 ohmios

Parte trasera de la

combinación de TV/DVD

Parte trasera de la

combinación de TV/DVD

Parte trasera de la

combinación de

TV/DVD

Caja convertidora

de TV por cable

Receptor

DSS

LSQT0501A_pg49 10/26/01 2:30 PM Page 1

50

Por ayuda, llame al 1-800-211-PANA(7262) o envie e-mail a : [email protected]

Para buscar una escena particular

Búsqueda hacia adelante

Presione SLOW/SEARCH en el modo de reproducción.

Búsqueda hacia atrás

Presione SLOW/SEARCH en el modo de reproducción.

(Para liberar, presione PLAY)

Para saltar un capítulo o una pista

Salto hacia adelante

Presione SKIP

l

+ en el modo de reproducción.

Un capítulo (DVD) o una pista (Vídeo CD/CD) se salta cada ves

que se oprime la tecla.

Salto hacia atrás

Presione -

l

SKIP en el modo de reproducción.

Para ver una imagen fija

Presione PAUSE durante la reproducción.

(Para liberar, presione PLAY)

Para ver imágenes cuadro a cuadro

(DVD/Vídeo CD)

Presione PAUSE en el modo de imagen fija.

La imagen avanza un cuadro cada vez que presiona la tecla.

(Para volver a la reproducción normal, presione PLAY.)

Para ver en cámara lenta (DVD/Vídeo CD)

Coloque modo de imagen figa (pause) y despues presione

SLOW/SEARCH o SLOW/SEARCH (Para liberar presione PLAY.)

Operaciones básicas del DVD

1

3

4

5

6

7

2

2

3

Selección del ítem deseado

1)Presione

(o ) para

seleccionar.

2)Presione SET para ajustar

ELEGIR :

FIJAR : SET SIGUIENTE: DISPLAY

T I TULO : 12 DVD

CAPITULO: 11 0:12:34

ELEGIR :

FIJAR : SET SIGUIENTE: DISPLAY

T I TULO : 12 DVD

CAPITULO: 24 0:12:34

PISTA : 12 V I DEO CD

PBC : I NACT I VO 0 : 12 : 34

FIJAR : SET SIGUIENTE: DISPLAY

PISTA : 17 V I DEO CD

PBC : I NACT I VO 0 : 12 : 34

FIJAR : SET SIGUIENTE: DISPLAY

1

Cuando se presiona DISPLAY, la visualización

en pantalla muestra la información del disco

(título / capítulo / número de lista, tiempo

transcurrido de reproducción, audio / idioma

del subtítulo, y ángulo) e información (repetir la

reproducción, modo reproducción, Karaoke

vocal encendido / apagado, etc.).

Funcionnamiento del DVD utilizando

visualizaciones en pantalla

Presione DISPLAY en el modo

reproducción o parada.

Visualizar Información en

pantalla.

• Cada vez que se presione DISPLAY,

la visualización en pantalla cambia

como se muestra a continuación.

Selected disc information

Selected unit information

Normal Screen

Información seleccionada del disco

Información seleccionada de la unidad

Limpiar la Pantalla

Spanish Quick Use Guide/Guía para rápida consulta

Presione POWER en el control remoto o el

aparato.

Elija el modo DVD

Presione DVD.

Introducir un disco.

1) Presione OPEN/CLOSE.

2) Ponga un disco en la bandeja de disco.

• Sujete el disco sin tocar ninguna de sus superficies,

póngalo con el lado donde esté impreso el título hacia

arriba, alinéelo con las guías y póngalo en su posición

apropiada. Disco de 3”(8 cm) Disco de 5” (12 cm)

Iniciar la reproducción

Presione PLAY.

La bandeja del disco se cierra automáticamente.

• Si está usando un DVD interactivo (Interactive DVD) o un

Vídeo CD con contol de reproducción (playback control) y

aparece un menú de títulos (TITLE MENU) en la pantalla,

siga al paso 5.

Expulsar el disco.

Presione OPEN/CLOSE.

Elija el artículo deseado.

1) Presione

o las teclas numéricas.

2) Presione SET para la reproducción.

Si usa las teclas numéricas, la reproducción

comienza automáticamente.

Parar la reproducción.

Presione STOP.

Selección del

ajuste

deseado

1)Presione

para

seleccionar.

2)Presione SET para Inicio de Ajuste

3)Presione para cambiar

4)Presione de nuevo set para

Realizacion

Para limpiar

la pantalla,

Presione

repetidamente

CLEAR o

DISPLAY.

51

For Your Information

1

Cambio del idioma de subtítulos

[DVD solamente]

EI idioma de los subtítulos seleccionado al hacer las

fijaciones iniciales se puede cambiar por otro idioma

diferente, si éste se encuentra disponible.

Presione SUBTITLE

durante la

reproducción.

Cuando no haya subtítulos

grabados, “-” se visualizará

en lugar del número de

idioma.

Algunos discos con películas, por ejemplo, vienen con dos o más

títulos. Si el disco tiene un menú de títulos grabados, el botón TITLE

podrá utilizarse para seleccionar el título de la película.

1

2

Presione TITLE durante la reproducción.

Ahora se visualiza una lista de los títulos del disco.

Utilización de un menú de títulos [DVD solamente]

1) Presione o las

teclas numéricas

seleccionar.

2) Presione SET o PLAY.

Seleccionar el título

deseado.

1

Algunos discos DVD tienen estructuras únicas de menús llamadas menús

DVD. Por ejemplo, los DVDs programados con un contenido complejo

proporcionan menús guía, y los grabados con varios idiomas proporcionan

menús para audio e idiomas de subtítulos. Aunque los contenidos de los

menús DVD y la operación cambian de disco a disco, a continuación se

explica la operación básica cuando se utiliza esta característica.

Presione MENU durante la reproducción.

El menú de DVD introducido en el disco se visualiza ahora.

2

Seleccionar el

idioma deseado.

1) Presione para

seleccionar idioma.

2) Presione

(o ) para

ajustar.

3) Presione

(o )

para seleccionar

“ACTIVO” o

“INACTIVO.”

1

Visualizar la

pantalla AUDIO.

Cambio del idioma de la pista de

sonido [DVD solamente]

EI idioma de la pista de sonido seleccionado al hacer

las fijaciones iniciales se puede cambiar por otro idioma

diferente, si éste se encuentra disponible.

Presione AUDIO durante

la reproducción.

2

Presione para

seleccionar idioma.

Seleccionar el

idioma deseado.

1

Visualizar la

pantalla de ángulo.

Visión desde otro ángulo

[DVD solamente]

Algunos discos DVD tienen escenas que han sido

filmadas simultáneamente desde un número de ángulos

diferentes. Con estos discos, la misma escena podrá

verse desde cada uno de estos ángulos diferentes

utilizando el botón ANGLE.

Presione ANGLE

durante la reproducción.

2

Presione para

seleccionar.

Seleccionar el

ángulo deseado.

1

2

Visualizar la pantalla AUDIO.

Presione AUDIO durante la reproducción.

Selección de vocal para los discos

de Karaoke [DVD/Video CD]

Seleccionar el ajuste

deseado.

1) Presione (o ) para

seleccionar.

2) Presione

(o ) para ajustar.

(DVD solamente)

• DVD Karaoke (1 vocal) VOZ ACTIVA VOZ INACTIVA

• DVD Karaoke (2 vocales) VOCAL V1 + V2 VOCAL V1

2

Seleccionar el ítem

deseado.

1) Presione o las

teclas numéricas para

seleccionar.

2) Presione SET o PLAY.

Ampliación de la imagen [DVD solamente]

Durante la reproducción de un DVD, puede ampliar partes

específicas de una imagen y seleccionar la relación de zoom

usando el botón ZOOM del control remoto.

Seleccione el tamaño de la imagen.

Presione ZOOM repetidamente para cambiar el tamaño de la

imagen como se indica a continuación:

SUBTITULO : 1 ENG ACTI VO

ELEGIR

: FIJAR : SET

I love you

T

I

TLE MENU

Cas

t

l

es

Love

r

s

B

i

r

ds

Dogs

of the world

SUBTITULO : 3 ESP ACTI VO

ELEGIR

: FIJAR : SET

Te amo

SONIDO: 1 ENG

Dolby Digital 3/2.1ch

Hello

ELEGIR : F I JAR : SET

SONIDO: 3 ESP

Dolby Digital 3/2.1ch

ELEGIR : F I JAR : SET

Hola

ANGULO

: 1

ELEGIR : F I JAR : SET

ANGULO

: 2

ELEGIR : F I JAR : SET

SONIDO:2 ENG VOZ ACTIVO

ELEGIR

: FIJAR : SET

DVD MENU

3 . ANGLE

1 . SUBT

I

TLE

2 . AUD

I

O

Use los botones y para desplazar la posición hacia arriba o hacia abajo.

Use los botones

y para desplazar la posición hacia la izquierda o hacia la

derecha.

VOCAL OFF VOCAL V2

• Video CD LR L R

Utilización de un menu de DVD [DVD solamente]

52

Por ayuda, llame al 1-800-211-PANA(7262) o envie e-mail a : [email protected]

Selección de IDIOMAS DEL

DISCO [DVD solamente]

Seleccionar el artículo deseado.

1) Presione para seleccionar.

2) Presione SET.

4

1

2

3

IDIOMAS DEL DISCO

Todos los idiomas ofrecidos en el disco pueden ser

ajustados, Si el idioma ajustado no es ofrecido en el

disco, se seleccionará el idioma original del disco.

SALIDA DE AUDIO

Puede usted ajustar la salida audio procedente del

terminal de salida audio digital.

DETENER RASTREO

Para seleccionar “CAMPO” o “CUADRO” para

prevenir inestabilidad o para permitir ver textos

pequeños o patrones finos claramente en el modo de

imagen fija.

4 : 3 PREFERENCIA

Para seleccionar si el material del vídeo para pantalla

ancha será vuelto a reproducir en el estilo Pan&Scan

o en el estilo Letterbox en la pantalla.

5

Volver a visualizar el menú de DVD para

continuar el ajuste.

Presione ACTION y pase al paso 3 para ajustar otro

ajuste o, para salir, presione ACTION tres veces.

Visualizar MAIN MENU.

Presione ACTION en el modo de parada.

1) Presione para seleccionar.

2) Presione SET.

Visualizar la pantalla DVD.

1) Presione para seleccionar.

2) Presione SET.

Seleccionar el artículo deseado.

Seleccione “AUDIO”

Inglés / Español / Francés :

(Fijación de fábrica : inglés)

Original : Se seleccionará el idioma original de cada

disco.

OTRO **** : Se puede seleccionar el otro idioma.

Seleccione “SUBTITULO”

AUTO : Se seleccionará el mismo que fue seleccionado

en la preparación de “AUDIO”. (Fijación de

fábrica)

• Si el idioma seleccionado en la preparación de

“AUDIO” se utiliza durante la reproducción, los

subtítulos no aparecerán.

• Si se utiliza otro idioma durante la reproducción,

los subtítulos aparecerán en el idioma

seleccionado en la preparación de “AUDIO”

Inglés / Español / Francés

OTRO **** : Se puede seleccionar el otro idioma.

Seleccione “MENU”

Inglés / Español / Francés : (Fijación de fábrica : inglés)

OTRO **** : Se puede seleccionar el otro idioma.

Fijaciones iniciales

Puede usted programar pistas específicas y el orden de

reproducción.

• Vídeo CD o CD es insertado en el modeo DVD.

Visualizar MAIN MENU.

Presione ACTION en el modo parada.

Las pistas se reproducen de forma arbitraria.

Repita los pasos 1-3 de la página anterior.

Seleccionar “REPRODUCCION

ALEATORIA.”

1) Presione para seleccionar.

2) Presione SET.

• Comienza la reproducción

arbitraria.

• Para cancelar, presione STOP

durante la reproducción y luego

presione CLEAR.

Seleccionar “MODO DE

REPRODUCCION.”

1) Presione para

seleccionar.

2) Presione SET para

visualizar.

Seleccionar

“REPRODUCCION DE

PROGRAMAS.”

1) Presione para

seleccionar.

2) Presione SET para

visualizar.

Vísualizar la pantalla

DVD.

1) Presione para

seleccionar “DVD.”

2) Presione SET para

visualizar.

Seleccionar el número

de la pista deseada. (Se

visualizan los números

de la pista del disco).

1) Presione para

seleccionar.

2) Presione SET para seleccionar.

• Repita el paso 5 para

seleccionar otra pista.

• La pista seleccionada se añade

a la parte derecha.

Comenzar

“REPRODUCCION DE

PROGRAMAS.”

1) Presione para

seleccionar “INICIAR.”

2) Presione SET.

• La reproducción comienza

en la secuencia

programada.

• Para cancelar, pulsar STOP

durante la reproducción y

luego presione CLEAR.

Reproducción programada [Vídeo CD/CD]

Reproducción arbitraria [Vídeo CD/CD]

MODO DE REPRODUCCION

ELEGIR :

FIJAR : SET

TERMINAR : ACTION

REPRODUCCION DE PROGRAMAS

REPRODUCCION ALEATORI A

DVD MENU PRINCIPAL

ELEGIR :

FIJAR : SET

TERMINAR : ACTION

IDIOMAS DEL DISCO

SALIDA DE AUDIO

DETENER RASTREO : CAMPO

4 : 3 PREFERENC I A : Le t t erbox

MODO DE REPRODUCCION

ELEGIR :

FIJAR : SET

TERMINAR : ACTION

REPRODUCCION DE PROGRAMAS

REPRODUCCION ALEATORIA

MENU PR

I

NCIPAL

DVD

BLOQUEO

CANAL

RELOJTV

ID

I

OMA

TERM

I

NAR :

ACT

I

O

N

ELEG

I

R

:

F

I

JAR

:

SET

5

3

1

REPRODUCCION DE PROGRAMAS

ELEGIR :

FIJAR : SET

TERMINAR : ACTION

DISCO

PROGRAMA

1 61116 5 8

2 7 12 17 15 6

3 8 13 18 1 13

4 91419 3 2

5101520 2

BORRAR EL ULTIMO

BORRAR TODO INIC I AR

REPRODUCCION DE PROGRAMAS

ELEGIR :

FIJAR : SET

TERMINAR : ACTION

DISCO

PROGRAMA

1 61116 5 8

2 7 12 17 15 6

3 8 13 18 1 13

4 91419 3 2

5101520 2

BORRAR EL ULTIMO

BORRAR TODO INIC I AR

1

2

3

4

2

5

6

Spanish Quick Use Guide/Guía para rápida consulta

53

For Your Information

AUTO : Durante el modo de imagen fija se

seleccionarán automáticamente

“Campo fijo” o “Cuadro fijo” (Fijacion

de fabrica)

CAMPO : Seleccione este ajuste cuando ocurra

“distorsión” en las imagenes, incluso

cuando se haya seleccionado

“AUTO”.

CUADRO : “Cuadro fijo” es siempre seleccionado.

Seleccionar este ajuste cuando no se

puedan ver claramente texto pequeño

o patrones finos incluso cuando esté

seleccionado “AUTO”.

Selección de SALIDA DE AUDIO

Seleccione “LPCM(DVD)”

INACTIVO : Por el conector de salida de audio

digital solamente sale PCM lineal de

48 kHz/16 bits. Durante la

reproducción del DVD grabado en el

PCM lineal de 48 kHz/20 bits o 96

kHz, no sale audio digital. (Fijación de

fábrica)

PCM : Durante la reproducción del DVD

grabado en el PCM lineal de 48 kHz/

20 bits/24 bits o 96 kHz, sale audio

digital convertido a 48 kHz/16 bits.

(La salida

digital de audio PCM está

restringida a 48 kHz/16bits

o menos

para proteger los derechos de autor.)

Seleccione “Dolby Digital”

Bitstream: Sale un flujo de bits Dolby digital

(2ch-5.1ch). (Fijación de fábrica)

INACTIVO : No hay salida de audio.

Seleccione “dts”

Bitstream : Sale un flujo de bits dts. (Fijación de

fábrica)

INACTIVO : No hay salida de audio.

Seleccione “DRC (

Dynamic Range Compression

)”

INACTIVO : Se selecciona el margen de audio

normal.

(Fijación de fábrica)

ACTIVO : Seleccione este ajuste para disfrutar

de un sonido dinámico incluso a bajo

volumen. Esto es muy útil para

escuchar durante la noche.

[Esta función sólo se activa con DVDs

Dolby Digital.]

Seleccione “SURROUND”

El sonido envolvente crea el efecto de sonido que

procede de altavoces que parecen ester en la parte

de atrás aún cuando solo se ha conectado a un

sistema estéreo de 2 canales.

INACTIVO : No efecto de sonido envolvente.

(Fijación de fábrica)

ACTIVO : Efecto de sonido envolvente.

Selección de 4 : 3 PREFERENCIA

Pan&Scan :

Datos de la pantalla ancha de vídeo

son reproducidos en el estilo Pan &

Scan (la parte derecha e izquierda de

la pantalla son recortadas). (Fijación

de fábrica)

• Datos de vídeo no formateados en

Pan & Scan serán reproducidos en el

estilo letterbox.

Letterbox : Datos de la pantalla ancha de vídeo

son reproducidos en el estilo

Letterbox (la parte de arriba y abajo

de la pantalla tienen un margen

negro).

Selección de DETENER RASTREO

54

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Index

A Accessories............................................... 4

AC Power Plug........................................... 9

ACTION button .................................... 8, 12

ADD / DLT button ................................ 8, 13

Audio Adjustment..................................... 31

Audio Auto Gain Control (AGC).............. 30

Audio button ......................................... 8, 19

Audio connections ............................. 14, 15

Audio Menu .............................................. 30

Audio Mode for TV Viewing ..................... 19

Audio Mute ............................................... 18

Audio / Video Adjustment ........................ 31

Audio / Video In Jack................................. 9

Audio / Video Menu.................................. 30

Audio Output Connector (L/R).................. 9

Auto Operation Functions ....................... 27

B Batteries ..................................................... 4

Before Requesting Service ..................... 44

Before Using .............................................. 4

Blocking Message ................................... 29

Blue Screen Display ................................ 23

Broadcast Types..................................... 19

C Cable Box Brand Code Number ............. 25

Cable Box Universal Remote

Control Feature....................................... 24

Caption On Mute...................................... 21

Channel ........................................10, 11, 23

CHANNEL UP / DOWN button ....... 8, 9, 18

Clock ........................................................ 12

Closed Caption .................................. 20, 21

Code Numbers, DSS / Cable Box Brand

25

Connections............................................. 10

Connections, Audio ................................. 15

Connections, DSS / Cable Box............... 10

Connections, Ant./Cable ......................... 10

D DISPLAY / ENTER button ............. 8, 23, 24

DSS Brand Code Number....................... 25

DSS CABLE button.............................. 8, 24

DSS / Cable Box Connections................ 10

DST (Daylight Saving Time) ................... 11

F Front Panel Indicators............................... 9

Function Display ...................................... 23

I Important Safeguards and Precautions ... 2

Information (Unit, Disc) ..................... 4, 6, 7

Initial Setup............................................... 10

Indicators on the Front Panel ................... 9

Input Mode ............................................... 27

L Language ................................................. 12

LIGHT button ............................................. 8

Limited Warranty..................................... BC

Location of Controls .............................. 8, 9

M MTS Broadcast / TV Stereo System...... 19

MUTE button .................................. 8, 18, 21

N NUMBER keys ..................................8, 18, 24

TV

O 100 Key .............................................. 18, 24

On-Screen Displays (OSD) .......23, 37, 38

ON-TIMER Indicator ........................... 9, 22

ON-TIMER with Alarm............................. 22

Outdoor Antenna Connections ............... 10

P Phones ..................................................... 18

POWER button ............. 8, 9, 10, 16, 18, 24

Q Quality Picture ........................................... 4

R Rapid Tune............................................... 18

R-TUNE button .................................... 8, 18

Remote Control Buttons............................ 8

Remote Sensor.......................................... 9

Remote Warning Feature........................ 26

Reset Language, Channels, Clock,

Time Zone Adjust .............................. 12, 13

S Safety Precautions .................................... 3

Secret Code ............................................. 27

SELECT / SET button.......................... 8, 12

Servicenter............................................... 47

Sleep Timer.............................................. 22

Spanish Quick Use Guide .............. 48 ~ 53

Specifications............................................. 6

SURROUND button ............................ 8, 26

Surround Sound....................................... 26

T Table of Contents ...................................... 5

Time Zone Adjust .................................... 13

TV Operation ........................................... 18

TV Timer Features .................................. 22

TV button.............................................. 8, 24

TV Status & Clock Display...................... 23

U Unit, Front/Rear view ............................ 8, 9

Universal Remote Control....................... 24

US MOVIES Ratings ......................... 28, 29

US TV PROGRAMS Ratings ............ 28, 29

V Video Adjustment..................................... 31

Video Menu .............................................. 30

V-Chip Control Feature ................... 27 ~ 29

VHF / UHF Antenna Input Terminal ......... 9

Volume Adjust .......................................... 26

VOLUME UP / DOWN button ............. 8, 18

W Warning and Instruction Displays .......... 45

Weak Signal Display Feature ................. 26

LSQT0501_44p56.p65 10/29/2001, 12:39 PM54

55

For Your Information

A ANGLE button ...................................... 8, 33

ANGLE Indicator...................................... 33

Auto-Power Off function.......................... 17

AUDIO button ...................................... 8, 32

AUDIO OUTPUT ............................... 41, 42

Audio soundtrack language (DVD) ........ 32

B Basic DVD Operation ........................ 16, 17

C CLEAR button ..............................8, 35 ~ 37

D Definition of terms...................................... 7

Disc Audio Attribute 1 Type, Sampling

Frequency, Bit No. ................................. 32

Disc format................................................. 7

Disc handling ............................................. 4

Disc Information Screen ................... 35, 38

DISC LANGUAGES (DVD)..................... 41

Disc Operation................................. 32 ~ 36

Disc Tray ......................................... 4, 9, 16

DISPLAY button .............................8, 35, 37

DVD button........................................... 8, 16

DVD Lock Feature (DVD)....................... 40

DVD Lock Ratings (DVD) ....................... 40

DVD menu (DVD) .................................... 34

DVD Operation using On-Screen .. 37 ~ 39

F FF button.................................................. 16

Foward / Reverse Chapter / Track skip 17

Frame by Frame picture

(DVD/Video CD) ..................................... 17

K Karaoke (DVD/Video CD) ....................... 33

L Language Code List ................................ 46

M MENU button ........................................... 34

Multiple angle viewing (DVD) .................. 33

O OPEN / CLOSE button.................... 8, 9, 16

Optical digital audio output connector ...... 9

P PAUSE button ...................................... 8, 17

Picture Zoom (DVD)................................ 33

Play........................................................... 16

Playback control (Video CDs) ................ 17

PLAY button ......................................... 8, 16

Program Play (Video CD/CD)................. 35

Program Repeat Play (Video CD/CD) ... 35

R Random Play (Video CD/CD) ................. 36

Region number .......................................... 3

Foward / Reverse rapid scene search.. 17

Repeat Play ............................................. 35

RESUME function.................................... 17

RETURN button................................... 8, 16

REW button.......................................... 8, 16

S

Settings for DVD Operation ............41 ~ 43

SKIP I / I button........................... 8, 16

Slow Motion (DVD/Video CD) ................. 17

SLOW / button .......................... 8, 17

STILL MODE ..................................... 41, 43

Still (Pause) Picture ................................. 17

DVD

Subtitle language (DVD).................... 32, 41

T TV MODE........................................... 41, 43

Title menu (DVD)..................................... 34

U Unit information screen (Unit) ................ 39

Z Zoom button......................................... 8, 33

LSQT0501_44p56.p65 10/26/2001, 2:26 PM55

Panasonic Consumer Electronics Company,

Division of Matsushita Electric Corporation

of America, One Panasonic Way

Secaucus, New Jersey 07094

Panasonic Sales Company,

Division of Matsushita Electric of Puerto Rico, Inc.

AVE. 65 de Infantería, Km. 9.5 San Gabriel

Industrial Park Carolina, Puerto Rico 00985

PANASONIC/QUASAR Video Products

Limited Warranty

Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the Warrantor”) will repair or

replace this product with new or refurbished parts or equivalent product, free of charge, in the USA or Puerto Rico, in the event of

a defect in materials or workmanship as follows (all time periods commence from the date of the original purchase):

PRODUCT

CAMCORDER

DVD/VCR DECK

DIGITAL STILL

CAMERA

A/V MIXER

TV/VCR,

TV/DVD

TV/DVD/VCR

COMBINATION

TV/HDR

COMBINATION

LABOR

NINETY (90) DAYS

CRT - NINETY (90) DAYS

NINETY (90) DAYS

CRT - NINETY (90) DAYS

PARTS

ONE (1) YEAR, EXCEPT

CCD IMAGE SENSOR

- SIX (6) MONTHS

ONE (1) YEAR

ONE (1) YEAR, EXCEPT

CCD IMAGE SENSOR

- SIX (6) MONTHS

ONE (1) YEAR

ONE (1) YEAR,

EXCEPT CRT

CRT - TWO (2) YEARS

ONE (1) YEAR,

EXCEPT CRT

CRT - TWO (2) YEARS

CONTACT NUMBER

1-800-211-PANA(7262)

1-800-272-7033

1-800-211-PANA(7262)

1-888-843-9788

SERVICE

Carry-In or Mail-In

Carry-In: 21” CRT

and Smaller

In-Home or Carry-In:

22” CRT and Larger

In-Home or Carry-In

Batteries (if included) - New rechargeable batteries in exchange for defective rechargeable batteries for ten (10) days.

Non-rechargeable batteries are not warranted.

Tape (if included) - New video cassette tape in exchange for a defective video cassette tape for five (5) days.

Memory cards (if included) - Exchange defective item for new one for ninety (90) days.

In-home, carry-in or mail-in service, as applicable, in the USA can be obtained during the warranty period by contacting a Panasonic

Services Company (PASC) Factory Servicenter listed in the Servicenter Directory. Or call toll free contact number listed above, to

locate an authorized PASC Servicenter. Carry-in or mail-in service in Puerto Rico can be obtained during the warranty period by calling

the Panasonic Sales Company telephone number listed in the Servicenter Directory.

This warranty is extended only to the original purchaser. A purchase receipt or other proof of the date of the original purchase is

requires before warranty service is rendered.

This warranty only covers failures due to defects in materials and workmanship, which occur during normal use and does not cover

normal maintenance, including, but not limited to, video and audio head cleaning. The warranty does not cover damage which occurs

in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accident, misuse,

abuse, neglect, mishandling, misapplication, alteration, modification, faulty installation, set-up adjustments, improper antenna,

inadequate signal pickup, maladjustment of consumer controls, improper operation, power line surge, improper voltage supply,

lightning damage, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by

anyone other than a PASC Factory Servicenter or a PASC authorized Servicenter, or damage that is attributable to acts of God.

LIMITS AND EXCLUSIONS

There are no express warranties except as listed above.

THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION,

DAMAGE TO RECORDING MEDIA) RESULTING FROM THE USE OF THIS PRODUCTS, OR ARISING OUT OF ANY BREACH OF THE

WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

PARTICULAR PURPOSE, ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the

exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or

limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary, from state to state. If

a problem with this product develops during or after the warranty period, you may contact your dealer or Servicenter. If the problem is not handled to

your satisfaction, then write to the Consumer Affairs Department at the Panasonic Consumer Electronics Company address above.

SERVICE CALLS WHICH DO NOT INVOLVE DEFECTIVE MATERIALS OR WORKMANSHIP AS DETERMINED BY THE WARRANTOR, IN

ITS SOLE DISCRETION, ARE NOT COVERED. COSTS OF SUCH SERVICE CALLS ARE THE RESPONSIBILITY OF THE PURCHASER.

warvid 02/ 12/ 2001

Warranty

Panasonic Consumer Electronics Company,

Division of Matsushita Electric Corporation of America

One Panasonic Way Secaucus, New Jersey 07094

Panasonic Sales Company (“PSC”),

Division of Matsushita Electric of Puerto Rico, Inc.

Ave. 65 de Infantería, Km. 9.5

San Gabriel Industrial Park, Carolina, Puerto Rico 00985