Gerber G0022529 Manual de usuario

Marca: Gerber

Modelo: G0022529

Tipo: Manual de usuario

29-840 Standard Height Pedestal

29-841 ErgoHeight™ Pedestal

29-842 MAXWELL™ Pedestal

29-843 ALLERTON™ Pedestal

29-844 PICTURESQUE™ Pedestal

29-845 WICKER PARK™ Pedestal

29-846 BRIANNE™ Pedestal

29-847 LOGAN SQUARE™ Pedestal

29-848 BLAZE™ Pedestal

Instructions for Installing Lavatory-Pedestal Units

#22-504 MAXWELL™ Consists of

#12-504 Lavatory &

#29-842 Pedestal

#22-514 MAXWELL™ " " #12-514 " " "

#22-534 La Mer Petite

" " #12-524 " " #29-840 "

#22-554 La Mer

" " #12-544 " " "

#22-558 La Mer

" " #12-548 " " "

#22-574 La Rive

" " #12-564 " " "

#22-578 La Rive

" " #12-568 " " "

#22-594 La Rive Petite

" " #12-584 " " "

#22-598 La Rive Petite

" " #12-588 " " "

#22-565 ALLERTON ™ Petite

" " #12-565 " " #29-843 "

#22-569 ALLERTON ™ Petite

" " #12-569 " " "

#22-575 ALLERTON ™

" " #12-575 " " " "

#22-579 ALLERTON ™

" " #12-579 " " " "

#22-535 BRIANNE ™ Petite

" " #12-535 " " #29-846 "

#22-539 BRIANNE ™ Petite

" " #12-539 " " " "

#22-545 BRIANNE ™

" " #12-545 " " " "

#22-549 BRIANNE ™

" " #12-549 " " " "

#22-529 PICTURESQUE ™

" " #12-529 " " #29-844 "

#22-555 LOGAN SQUARE™ Petite " #12-555 " " #29-847 "

#22-559 LOGAN SQUARE™ Petite " #12-559 " " " "

#22-585 LOGAN SQUARE™

" " #12-585 " " " "

#22-589 LOGAN SQUARE™

" " #12-589 " " " "

#22-592 WICKER PARK™ " " #12-592 " " #29-845 "

#22-599 WICKER PARK™ " " #12-599 " " " "

#22-512 BLAZE™ " " #12-512 " " #29-848 "

#22-515 BLAZE™ " " #12-515 " " " "

#22-519 BLAZE™ " " #12-519 " " " "

See detailed drawing for dimensions

1. Place one cork square on each side of lavatory inside pedestal ring .

2. Measure from floor for placement of top of hanger.(see drawing for specific pedestal

being installed )

3. Center screws in vertical slots of hanger so lavatory can be adjusted.

4. Place pedestal under lavatory.

5. Hang lavatory, raise or lower hanger to appropriate height. Mark anchor screw locations.

6. Remove lavatory,install fittings, add additional screws in lavatory hanger. (also install seal

portion of trap to tail piece)

7. Rehang lavatory, level and install anchor screws in holes provided at back of lavatory.

8. Install anchor screws in pedestal to floor.

9. Attach trap,supplies, etc.

Note: Provide suitable reinforcement for all wall supports.

8CGE0034, REV. 07-2013

(MAY BE ADJUSTED TO AID IN

LEVELING LAVATORY BASIN)

FOR #22-535, 539 BRIANNE ™ PETITE

FOR #22-545, 549 BRIANNE ™

FOR #22-565, 569 ALLERTON ™ PETITE

FOR #22-575, 579 ALLERTON ™

FOR #22-504 MAXWELL ™ PETITE

FOR #22-514 MAXWELL ™

FOR #22-555, 559 LOGAN SQUARE ™ PETITE

FOR #22-585, 589 LOGAN SQUARE ™

FOR #22-534, 554, & 558 LA MER

FOR #22-574, 578, 594, & 598 LA RIVE

FOR #22-512, 515, 519 BLAZE™

32"

31-7/16"

31-11/16"

32-1/2"

30-3/8"

Instrucciones para Instalar Lavabo-Pedestal Unidades

#22-504 MAXWELL™ Consiste en

#12-504 Lavabo &

#29-842 Pedetal

#22-514 MAXWELL™ " " #12-514 " " "

#22-534 La Mer Petite

" " #12-524 " " #29-840 "

#22-554 La Mer

" " #12-544 " " "

#22-558 La Mer

" " #12-548 " " "

#22-574 La Rive

" " #12-564 " " "

#22-578 La Rive

" " #12-568 " " "

#22-594 La Rive Petite

" " #12-584 " " "

#22-598 La Rive Petite

" " #12-588 " " "

#22-565 ALLERTON™ Petite

" " #12-565 " " #29-843 "

#22-569 ALLERTON™ Petite

" " #12-569 " " "

#22-575 ALLERTON™

" " #12-575 " " " "

#22-579 ALLERTON™

" " #12-579 " " " "

#22-535 BRIANNE™ Petite

" " #12-535 " " #29-846 "

#22-539 BRIANNE™ Petite

" " #12-539 " " " "

#22-545 BRIANNE™

" " #12-545 " " " "

#22-549 BRIANNE™

" " #12-549 " " " "

#22-529 PICTURESQUE™

" " #12-529 " " #29-844 "

#22-555 LOGAN SQUARE™ Petite " #12-555 " " #29-847 "

#22-559 LOGAN SQUARE™ Petite " #12-559 " " "

#22-585 LOGAN SQUARE™

" " #12-585 " " " "

#22-589 LOGAN SQUARE™

" " #12-589 " " " "

#22-592 WICKER PARK™ " " #12-592 " " #29-845 "

#22-599 WICKER PARK™ " " #12-599 " " " "

#22-512 BLAZE™ " " #12-512 " " #29-848 "

#22-515 BLAZE™ " " #12-515 " " " "

#22-519 BLAZE™ " " #12-519 " " " "

Véase la ilustración para las dimensiones

1. Coloque una escuadra de corcho en cada lado del lavabo, dentro del anillo del pedestal.

2. Para saber dónde colocar la parte superior del colgador, mida desde el suelo (véase el dibujo

del pedestal en fase de instalación).

3. Centre los tornillos en los huecos verticales del colgador para poder ajustar el lavabo.

4. Coloque el pedestal bajo el lavabo.

5. Cuelgue el lavabo, suba o baje el colgador a la altura apropiada. Marque los lugares de los

tornillos de sujeción.

6. Retire el lavabo, instale las conexiones, añada los tornillos en el colgador del lavabo (instale

también la porción de sellado del soporte en la pieza contrapunta).

7. Vuelva a colgar el lavabo, nivélelo e instale los tornillos de sujeción en los orificios previstos

en la parte trasera del lavabo.

8. Instale los tornillos de sujeción del pedestal en el suelo.

9. Sujete el soporte, piezas, etc.

Instructions pour I'installation Lavabo-Piédestal Untés

#22-504 MAXWELL™ Se Compose #12-504 Lavabo &

#29-842 Piédestal

#22-514 MAXWELL™ " " #12-514 " " "

#22-534 La Mer Petite

" " #12-524 " " #29-840 "

#22-554 La Mer

" " #12-544 " " "

#22-558 La Mer

" " #12-548 " " "

#22-574 La Rive

" " #12-564 " " "

#22-578 La Rive

" " #12-568 " " "

#22-594 La Rive Petite

" " #12-584 " " "

#22-598 La Rive Petite

" " #12-588 " " "

#22-565 ALLERTON™ Petite

" " #12-565 " " #29-843 "

#22-569 ALLERTON™ Petite

" " #12-569 " " "

#22-575 ALLERTON™

" " #12-575 " " " "

#22-579 ALLERTON™

" " #12-579 " " " "

#22-535 BRIANNE™ Petite

" " #12-535 " " #29-846 "

#22-539 BRIANNE™ Petite

" " #12-539 " " " "

#22-545 BRIANNE™

" " #12-545 " " " "

#22-549 BRIANNE™

" " #12-549 " " " "

#22-529 PICTURESQUE™

" " #12-529 " " #29-844 "

#22-555 LOGAN SQUARE™ Petite " #12-555 " " #29-847 "

#22-559 LOGAN SQUARE™ Petite " #12-559 " " "

#22-585 LOGAN SQUARE™

" " #12-585 " " "

#22-589 LOGAN SQUARE™

" " #12-589 " " "

#22-592 WICKER PARK™ " " #12-592 " " #29-845 "

#22-599 WICKER PARK™ " " #12-599 " " " "

#22-512 BLAZE™ " " #12-512 " " #29-848 "

#22-515 BLAZE™ " " #12-515 " " " "

#22-519 BLAZE™ " " #12-519 " " " "

Consulter Íillustration détaillée pour obtenir les dimensions

1. Mettre un carré de liège de chaque côté du lavabo à l´intérieur du cercle de la colonne.

2. Mesurer à partir du plancher pour déterminer la position de la partie supérieure du support

(la hauteur des différents types de colonne est indiquée sur l´illustration).

3. Il est possible de régler les vis centrales dans les fentes verticales du support pour convenir au

lavabo.

4. Mettre la colonne sous le lavabo.

5. Suspendre le lavabo,puis monter ou descendre le support pour obtenir la hauteur appropriée.

Marquer l´emplacement des vis d´ancrage.

6. Enlever le lavabo, installer les raccords et ajouter les vis supplémentaires au support de lavabo

(installer également la garde d´eau du siphon à l´about).

7. Suspendre de nouveau le lavabo, mettre de niveau et installer les vis d´ancrage dans les trous

prévus à cet effet à l´arrière du lavabo.

8. Installer les vis d´ancrage fixant la colonne au plancher.

9. Raccorder le siphon, les conduites d´eau, etc.

29-1/4"

31-3/8"

31-1/8"

31"

FOR #22-529 PICTURESQUE™

FOR #22-592,599 WICKER PARK™

Transcripción de documentos

FOR #22-574, 578, 594, & 598 LA RIVE FOR #22-512, 515, 519 BLAZE™ FOR #22-534, 554, & 558 LA MER FOR #22-592,599 WICKER PARK™ 32" 31-1/8" FOR #22-585, 589 LOGAN SQUARE ™ FOR #22-555, 559 LOGAN SQUARE ™ PETITE 31" 31-3/8" FOR #22-529 PICTURESQUE™ FOR #22-514 MAXWELL ™ 30-3/8" 29-1/4" FOR #22-504 MAXWELL ™ PETITE 30-3/8" FOR #22-575, 579 ALLERTON ™ 32-1/2" FOR #22-565, 569 ALLERTON ™ PETITE 31-7/16" FOR #22-545, 549 BRIANNE ™ 31-11/16" FOR #22-535, 539 BRIANNE ™ PETITE 31-11/16" (MAY BE ADJUSTED TO AID IN LEVELING LAVATORY BASIN) 29-840 Standard Height Pedestal 29-841 ErgoHeight™ Pedestal 29-842 MAXWELL™ Pedestal 29-843 ALLERTON™ Pedestal 29-844 PICTURESQUE™ Pedestal 29-845 WICKER PARK™ Pedestal 29-846 BRIANNE™ Pedestal 29-847 LOGAN SQUARE™ Pedestal 29-848 BLAZE™ Pedestal Instructions for Installing Lavatory-Pedestal Units #22-504 #22-514 #22-534 #22-554 #22-558 #22-574 #22-578 #22-594 #22-598 #22-565 #22-569 #22-575 #22-579 #22-535 #22-539 #22-545 #22-549 #22-529 #22-555 #22-559 #22-585 #22-589 #22-592 #22-599 #22-512 #22-515 #22-519 1. 2. 3. 4. 5. 6. 7. 8. 9. MAXWELL™ Consists MAXWELL™ " La Mer Petite " La Mer " La Mer " La Rive " La Rive " La Rive Petite " La Rive Petite " ALLERTON ™ Petite " ALLERTON ™ Petite " ALLERTON ™ " ALLERTON ™ " BRIANNE ™ Petite " BRIANNE ™ Petite " BRIANNE ™ " BRIANNE ™ " PICTURESQUE ™ " LOGAN SQUARE™ Petite LOGAN SQUARE™ Petite LOGAN SQUARE™ " LOGAN SQUARE™ " WICKER PARK™ " WICKER PARK™ " BLAZE™ " BLAZE™ " BLAZE™ " of " " " " " " " " " " " " " " " " " " " " " " " " " " #12-504 Lavatory & #12-514 " " #12-524 " " #12-544 " " #12-548 " " #12-564 " " #12-568 " " #12-584 " " #12-588 " " #12-565 " " #12-569 " " #12-575 " " #12-579 " " #12-535 " " #12-539 " " #12-545 " " #12-549 " " #12-529 " " #12-555 " " #12-559 " " #12-585 " " #12-589 " " #12-592 " " #12-599 " " #12-512 " " #12-515 " " #12-519 " " See detailed drawing for dimensions #29-842 Pedestal " " #29-840 " " " " " " " " " " " " " #29-843 " " " " " " " #29-846 " " " " " " " #29-844 " #29-847 " " " " " " " #29-845 " " " #29-848 " " " " " Place one cork square on each side of lavatory inside pedestal ring . Measure from floor for placement of top of hanger.(see drawing for specific pedestal being installed ) Center screws in vertical slots of hanger so lavatory can be adjusted. Place pedestal under lavatory. Hang lavatory, raise or lower hanger to appropriate height. Mark anchor screw locations. Remove lavatory,install fittings, add additional screws in lavatory hanger. (also install seal portion of trap to tail piece) Rehang lavatory, level and install anchor screws in holes provided at back of lavatory. Install anchor screws in pedestal to floor. Attach trap,supplies, etc. Note: Provide suitable reinforcement for all wall supports. 8CGE0034, REV. 07-2013 Instructions pour I'installation Lavabo-Piédestal Untés Instrucciones para Instalar Lavabo-Pedestal Unidades #22-504 #22-514 #22-534 #22-554 #22-558 #22-574 #22-578 #22-594 #22-598 #22-565 #22-569 #22-575 #22-579 #22-535 #22-539 #22-545 #22-549 #22-529 #22-555 #22-559 #22-585 #22-589 #22-592 #22-599 #22-512 #22-515 #22-519 #22-504 #22-514 #22-534 #22-554 #22-558 #22-574 #22-578 #22-594 #22-598 #22-565 #22-569 #22-575 #22-579 #22-535 #22-539 #22-545 #22-549 #22-529 #22-555 #22-559 #22-585 #22-589 #22-592 #22-599 #22-512 #22-515 #22-519 MAXWELL™ Se Compose MAXWELL™ " " La Mer Petite " " La Mer " " La Mer " " La Rive " " La Rive " " La Rive Petite " " La Rive Petite " " ALLERTON™ Petite " " ALLERTON™ Petite " " ALLERTON™ " " ALLERTON™ " " BRIANNE™ Petite " " BRIANNE™ Petite " " BRIANNE™ " " BRIANNE™ " " PICTURESQUE™ " " LOGAN SQUARE™ Petite " LOGAN SQUARE™ Petite " LOGAN SQUARE™ " " LOGAN SQUARE™ " " WICKER PARK™ " " WICKER PARK™ " " BLAZE™ " " BLAZE™ " " BLAZE™ " " #12-504 Lavabo & #29-842 Piédestal #12-514 " " " " #12-524 " " #29-840 " #12-544 " " " " #12-548 " " " " #12-564 " " " " #12-568 " " " " #12-584 " " " " #12-588 " " " " #12-565 " " #29-843 " #12-569 " " " " #12-575 " " " " #12-579 " " " " #12-535 " " #29-846 " #12-539 " " " " #12-545 " " " " #12-549 " " " " #12-529 " " #29-844 " #12-555 " " #29-847 " #12-559 " " " " #12-585 " " " " #12-589 " " " " #12-592 " " #29-845 " #12-599 " " " " #12-512 " " #29-848 " #12-515 " " " " #12-519 " " " " MAXWELL™ Consiste MAXWELL™ " La Mer Petite " La Mer " La Mer " La Rive " La Rive " La Rive Petite " La Rive Petite " ALLERTON™ Petite " ALLERTON™ Petite " ALLERTON™ " ALLERTON™ " BRIANNE™ Petite " BRIANNE™ Petite " BRIANNE™ " BRIANNE™ " PICTURESQUE™ " LOGAN SQUARE™ Petite LOGAN SQUARE™ Petite LOGAN SQUARE™ " LOGAN SQUARE™ " WICKER PARK™ " WICKER PARK™ " BLAZE™ " BLAZE™ " BLAZE™ " en " " " " " " " " " " " " " " " " " " " " " " " " " " #12-504 Lavabo #12-514 " #12-524 " #12-544 " #12-548 " #12-564 " #12-568 " #12-584 " #12-588 " #12-565 " #12-569 " #12-575 " #12-579 " #12-535 " #12-539 " #12-545 " #12-549 " #12-529 " #12-555 " #12-559 " #12-585 " #12-589 " #12-592 " #12-599 " #12-512 " #12-515 " #12-519 " & " " " " " " " " " " " " " " " " " " " " " " " " " " #29-842 Pedetal " " #29-840 " " " " " " " " " " " " " #29-843 " " " " " " " #29-846 " " " " " " " #29-844 " #29-847 " " " " " " " #29-845 " " " #29-848 " " " " " Véase la ilustración para las dimensiones Consulter Íillustration détaillée pour obtenir les dimensions 1. 2. 3. 4. 5. 6. 7. 8. 9. Mettre un carré de liège de chaque côté du lavabo à l´intérieur du cercle de la colonne. Mesurer à partir du plancher pour déterminer la position de la partie supérieure du support (la hauteur des différents types de colonne est indiquée sur l´illustration). Il est possible de régler les vis centrales dans les fentes verticales du support pour convenir au lavabo. Mettre la colonne sous le lavabo. Suspendre le lavabo,puis monter ou descendre le support pour obtenir la hauteur appropriée. Marquer l´emplacement des vis d´ancrage. Enlever le lavabo, installer les raccords et ajouter les vis supplémentaires au support de lavabo (installer également la garde d´eau du siphon à l´about). Suspendre de nouveau le lavabo, mettre de niveau et installer les vis d´ancrage dans les trous prévus à cet effet à l´arrière du lavabo. Installer les vis d´ancrage fixant la colonne au plancher. Raccorder le siphon, les conduites d´eau, etc. 1. 2. 3. 4. 5. 6. 7. 8. 9. Coloque una escuadra de corcho en cada lado del lavabo, dentro del anillo del pedestal. Para saber dónde colocar la parte superior del colgador, mida desde el suelo (véase el dibujo del pedestal en fase de instalación). Centre los tornillos en los huecos verticales del colgador para poder ajustar el lavabo. Coloque el pedestal bajo el lavabo. Cuelgue el lavabo, suba o baje el colgador a la altura apropiada. Marque los lugares de los tornillos de sujeción. Retire el lavabo, instale las conexiones, añada los tornillos en el colgador del lavabo (instale también la porción de sellado del soporte en la pieza contrapunta). Vuelva a colgar el lavabo, nivélelo e instale los tornillos de sujeción en los orificios previstos en la parte trasera del lavabo. Instale los tornillos de sujeción del pedestal en el suelo. Sujete el soporte, piezas, etc.