TQBC0838
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
English
Model No.
TC-17LA2
TC-17LA2D
For assistance, please call : 1-800-211-PANA (7262)
or send e-mail to : [email protected]
or visit us at www.panasonic.com (U.S.A.)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com (Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca (Canada)
LCD TV shown above is model TC-17LA2.
Espan˜ol
[Resumen]
Operating Instructions
LCD TV
2
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are in
the papers with the appliance.
■ Note to CATV System Installer: This reminder is provided to direct the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the building, as close to the point of
cable entry as practical.
The lightning flash with arrow
head within a triangle is intended
to tell the user that parts inside
the product are a risk of electric
shock to persons.
■ Important Safety Instructions for LCD TV
1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water. For example: Avoid placing it near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
6) Clean only with dry cloth. Unplug this LCD TV from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure
reliable operation of the LCD TV and to protect it from overheating. These openings must not be blocked
or covered. There should be at least 10 cm of space from these openings. The openings should never
be blocked by placing the LCD TV on a bed, sofa, rug or other similar surface. This LCD TV should not
be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11)
Only use attachments/accessories specified by the manufacturer. Otherwise it may cause hazards.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time. This will prevent
damage to the receiver due to lightning and power-line surges.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Upon completion of any service or repairs to this LCD TV, ask the service technician to perform routine
safety checks to determine that the television is in safe operating condition.
15) Operate only from the type of power source indicated on the marking label. If you are not sure of the
type of power supplied to your home consult your television dealer or local power company.
16) Follow all warnings and instructions marked on the LCD TV.
17) Never push objects of any kind into this LCD TV through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the LCD TV.
3
Important Safety Instructions
EXAMPLE OF ANTENNA
GROUNDING AS PER (NEC)
NATIONAL ELECTRICAL
CODE
GROUND
CLAMP
ANTENNA
LEAD-IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
18) If an outside antenna is connected to the
television
equipment, be sure the antenna system
is grounded so as to provide some protection
against voltage surges and built up static
charges. In the U.S. Selection 810-21 of the
National Electrical Code provides information
with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
19) An outside antenna system should not be located
in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing
an outside antenna system extreme care should
be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
20) Unplug this LCD TV from the wall outlet, and refer servicing to qualified service personnel under the
following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the LCD TV.
c. If the LCD TV has been exposed to rain or water.
d. If the LCD TV does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as improper adjustment of
other controls may result in damage and will often require extensive work by a qualified technician to
restore the LCD TV to normal operation.
e. If the LCD TV has been dropped or the cabinet has been damaged.
f. When the LCD TV exhibits a distinct change in performance - this indicates a need for service.
21) When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
22) WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES, CUPS, COSMETICS, ETC.)
ABOVE THE SET. (INCLUDING ON SHELVES ABOVE, ETC.)
23) CAUTION : TO PREVENT ELECTRIC SHOCK DO NOT USE THIS PLUG WITH A RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
24) CAUTION : USE WITH OTHER STAND MAY RESULT IN INSTABILITY CAUSING POSSIBLE INJURY.
25) CAUTION : DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
■
Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays.
The extended use of fixed image program material can cause a permanent "shadow image" on the LCD panel.
This background image is viewable on normal programs in the form of a stationary fixed image. This type of
irreversible LCD panel deterioration can be limited by observing the following steps:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.
■
This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury. Disposal of
these materials may be regulated in your community due to environmental considerations. For disposal or recycling
information please contact your local authorities, or the Electronics Industries Alliance: www.eiae.org.
NOTE:
•
This equipment is designed to operate in North America and other countries where the broadcasting
system and AC house current is exactly the same as in North America.
•
The marking or retained image on the LCD panel resulting from fixed image use is not an operating
defect and as such is not covered by Warranty. This product is not designed to display fixed
image patterns for extended periods of time.
4
Dear Panasonic Customer
Welcome to the Panasonic family of customers.
We hope that you will have many years of enjoyment from your new LCD TV.
To obtain maximum benefit from your set, please read these instructions before
making any adjustments, and retain them for future reference.
Retain your purchase receipt, and record the model number and serial number
of your set in the space provided on the rear cover of these instructions.
This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. If this equipment does cause or receive interference, which can be determined by
turning equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
Reorient or relocate the TV antenna.
Increase the separation between TV and other equipment.
Connect TV into separate outlet from other equipment.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
For assistance, please call : 1-800-211-PANA (7262)
or send e-mail to : [email protected]
or visit us at www.panasonic.com (U.S.A.)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com (Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca (Canada)
Federal Communication Commission Information
The ENERGY STAR label, a symbol for energy efficiency, was created by the U.S.
Environmental Protection Agency (EPA) and the U.S. Department of Energy
(DOE) to help customers identify products that can save them money and protect
the environment by saving energy. ENERGY STAR
compliant products generally
consume less energy than similar standard products.
5
PICTURE ADJUST ............................................... 20
AUDIO ADJUST ................................................... 21
ASPECT Controls ................................................ 22
Troubleshooting .................................................. 30
Specifications ...................................................... 31
Table of Contents
Important Safety Instructions .............................. 2
SUPPLIED ACCESSORIES ................................... 5
Maintenance .......................................................... 5
Installation ............................................................. 6
Remote control battery installation ...................... 6
Connections .......................................................... 7
Antenna Connection ............................................ 7
F-Adapter (Right Angle) fitting and removal ........ 7
Cable Box Connection ......................................... 7
Connecting Other Equipment .............................. 8
Connecting Headphones / Earphones ................. 9
Power ON / OFF ..................................................... 9
Menu Operations ................................................. 10
Basic Controls ..................................................... 12
Tuning Channels ................................................. 13
LOCK .................................................................... 14
CLOSED CAPTION .............................................. 18
INPUT LABEL ...................................................... 19
OTHER ADJUST .................................................. 19
Manual de instrucciones [ Resumen ]
Ajuste el soporte con el ángulo deseado ...23
Instalación de las pilas del mando a distancia ...
23
Conexiónes ...................................................24
Conexión de antena .....................................24
Para colocar y quitar la adaptador F (Ángulo recto) ...
24
Conexión del receptor de TV por cable ........24
Conexión de auriculares ............................... 25
Conexión/desconexión de la alimentación ...
25
Operaciones con menús .............................. 26
Controles básicos.........................................28
Sintonización de canales ............................. 29
TV
Check the accessories before installations.
• Operating Instruction book • Remote Control Transmitter
(EUR7726020)
SUPPLIED ACCESSORIES
• Batteries for the Remote
Control Transmitter
(2 × AA size)
• Warranty Card
• AC Adaptor
(N0JZHK000005)
Maintenance
Mild
detergent
CAUTION :
If water or similar substances get inside the monitor via the liquid crystal panel surface, a malfunction may result.
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water
solution or a weak detergent solution.
• Use eyeglass cleaner to remove stubborn dirt from the LCD.
• Never use alcohol, paint thinner or benzine to clean this unit.
•
Before using a chemically treated cloth, read the instructions that came with the cloth carefully.
• Service Center List,
Customer Card and
Customer Care Plan
Card (For U.S.A.)
• F-Adapter (Right Angle)
(Assembled for TC-17LA2D)
(K1SKAABB0001)
• AC Cord
(K2CA2EA000005)
6
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Observe the following precautions:
1. Always use new batteries when replacing the old set.
2. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
3. Battery replacement is necessary when remote control acts sporadically or fails to operate this unit.
Requires two AA batteries.
2. Install the batteries and replace the cover. Note
the correct polarity (+ and -).
Remote control battery installation
Installation
Receiver Location
Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For best performance,
Antenna cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various
components require. Also determine the length of cable you’ll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed
clearly. Turn off florescent lamps near the LCD and place in a location not exposed to outdoor light.
How to use the LCD stand
Adjust the stand to your desired angle.
30 30
Front
Front
Front
Notes:
• Do not drop, apply shock to or step on the remote control.
• Do not spill water on the remote control.
• Do not place objects between the remote control and remote control receiver.
• Do not use remote controls for other equipment at the same time.
• If the TV does not operate even when using the remote control from a close range, it is time to replace the
batteries.
Refer to the label on back of the remote control for directions on replacing batteries.
• TC-17LA2
The stand angle can be adjusted between 5° forward to
15° back, and rotated 30° to the right/left.
• TC-17LA2D
The stand angle is fixed 14° back.
1. Open the battery cover.
7
Connections
DC IN 15V
PS TBMU428
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
F-Adapter (Right Angle) fitting and removal
Note:
Cables and F-Type Antenna connectors are not supplied with this set.
F-Adapter
Antenna
Terminal
Antenna
Terminal
Fitting [TC-17LA2] Removal [TC-17LA2D]
• For reception of cable channels (01 - 125), connect the cable supplied by your local cable company. The
antenna mode must be set to CABLE (see page 13, MODE).
•
Certain cable systems offset some channels to reduce interference or view Premium (scrambled) channels. A cable
converter box is required for proper reception. Check with your local cable company for its compatibility requirements.
• Set the TV channel to CH3 or CH4 when using this connection.
Cable Box Connection
DC IN 15V
PS TBMU428
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
Incoming 75 Ohm Cable
from Cable Company
Back of the TV
Cable Box and VCR
75 Ohm Coaxial Cable
F-Type Antenna
Connector
DC IN 15V
PS TBMU428
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
Incoming 75 Ohm Cable from
Cable Company
Back of the TV
F-Type Antenna
Connector
75 Ohm Coaxial Cable
Back of the TV
DC IN 15V
PS TBMU428
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
Antenna Connection
For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor
antenna is recommended. The antenna mode must be set to TV (see page 13, MODE).
[TC-17LA2] [TC-17LA2D]
Back of the TV
Antenna
Terminal
F-Type
Antenna
Connector
F-Type
Antenna
Connector
F-Adapter
75 Ohm Coaxial Cable
Mixer
Cable Box
CABLE BOX
OUTPUT
INPUT
CABLE BOX
OUTPUT
INPUT
VCR
ANT OUTPUT ANT INPUT
UHF Antenna
VHF Antenna
When installing where there is
little space behind the TV:
(Examples: Using Wall-mounting
bracket; installing close to a wall.)
The antenna cable may be bent and
damaged near the connector if the F-
Adapter is used for connection.
In such situations, remove the F-Adapter
and connect the antenna cable directly.
8
Connecting Other Equipment
Connections
Notes:
• Only 480i and 480p are available through the component input terminals.
• When connecting video cables, priority is given to the S-Video cable when both the S-VIDEO input terminal
and the VIDEO input terminal are connected.
• With a monaural VCR, connect the monaural audio cable to the AUDIO-L terminal.
• Please make inquiries to video game manufacturers concerning component cables to connect with video
game console.
DC IN 15V
PS TBMU428
AUDIO
VIDEO
S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
AUDIO
VIDEO
S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
PrPbY
L
R
L
R
V
AUDIO
VIDEO
S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
Audio
OUT
S-Video
OUT
Video
OUT
COMPONENT VIDEO OUT
Audio
OUT
AUDIO
cable
COMPONENT
VIDEO cable
AUDIO
cable
VIDEO
cable
S-VIDEO cable
Super-VHS VCR
CAMCORDER
VIDEO GAME
CONSOLE
Note:
• Do not put the antenna
cable and the power cord
together to avoid noise.
To bundle the cables
with the clamper
1. Pull upward.
2. Put the cables and close.
[TC-17LA2]
DVD/STB
9
CH 6
STEREO
SAP
MONO
4 : 3
e.g.
2
1
3
DC IN 15V
PS TBMU428
POWER
TV/VIDEO VOLUME CHANNEL
Connections
Power ON / OFF
Connecting the plug to the wall outlet.
Press to turn the TV’s main power on/off.
• Power indicator
Main power ON : Green
Main power OFF : No light
The screen below is displayed for a few moments when the
TV is turned on.
Remote
control sensor
Main Power switch
AC120V, 60Hz
On the main unit
Power Indicator
(Not supplied)
Connecting Headphones / Earphones
M3 plug
Press to turn the TV on/off.
• Power indicator
Power ON : Green
Power OFF (Standby) : Red
• This does not work when the main power is off
(No light) (see above).
Note:
Select the menu language before operating the TV
(see page 11, LANGUAGE).
On the remote control
POWER
Notes:
• The TV and AC adaptor will still
consume some power as long as the
AC cord is still inserted into the wall
outlet.
• Be sure to use the AC cord and AC
adaptor included in the accessories.
• Usage of AC adaptors other than
specified may cause malfunctions.
Power cord
10
Menu Operations
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
or
Press to display MENU
screen.
1
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
ON SCREEN HELP ‘Instruction’ box
An On Screen Help box is displayed when a menu is displayed
on the TV. This Help box indicates which keys on the remote control
are used to navigate the menu shown.
MANUAL PROGRAM
ENTER CHANNEL
121
RETURN
DELETE
CH SELECT
ADD
2
11
Menu Operations
CLOSED CAPTION
MODE
OFF
ON MUTE
NO
(See page 18)
LANGUAGE
ENGLISH
LANGUAGE
Select the menu language.
OFF ON
COOLCOOL
PICTURE ADJUST
NORMAL
PIC MODE
BACK LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI PICTURE
+ 30
0
0
0
0
0
OFF ON
STANDARD
(See page 20)
•
To return to the previous screen :
•
To exit the MENU screen: This returns to the normal viewing.
Press to select the MENU screen (ADJUST or SET UP).
Press to select the sub-menu feature.
Press to display the sub-menu screen.
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
ENTER CODE FIRST
OFF ON
(See page 14 - 17)
(See page 19)
(See page 21)
PROGRAM CHANNELS
MODE
AUTO PROGRAM
MANUAL PROGRAM
TV
CABLE
(See page 13)
INPUT LABEL
VIDEO1
VIDEO2
COMPONENT
VIDEO1
VIDEO2
COMPONENT
(See page 19)
AUDIO ADJUST
NORMAL
MODE
BASS
TREBLE
STEREO SAP MONO
+ 5
+ 3
AUTO
OTHER ADJUST
VIDEO NR
OFF ON
3D Y/C FILTER
COLOR MATRIX
SD HD
POWER SAVE
STANDARD
OFF ON
12
POWER
TV/VIDEO VOLUME CHANNEL
STEREO SAP MONO
Basic Controls
POWER button
Press to turn the TV on or off.
(see page 9)
Note:
This does not work when the main power
is off (No light).
Numbered buttons
TV/VIDEO button
Press to change the input mode.
R-TUNE button
Press to switch to previously viewed
channel or video mode.
Not effective under the following
conditions:
1. Right after the TV is turned on.
2. After switching TV / CATV (MODE in
PROGRAM CHANNELS).
3. Right after the ACP (Automatic
channel programming) execution.
4. When the same channel as the
present channel is selected.
MUTE button
Press to mute the sound.
Press again to cancel mute.
Mute is canceled when the power is turned off or
volume level is changed.
ASPECT button
(see page 22)
MENU button
(see page 10)
RETURN button
Press to return to the previous screen.
RECALL button
Press to display channel number,
sleep timer and other options.
SAP button
Press to select the audio mode. You can
also change the mode in the MENU
screen (see page 21).
Increases volume
Moves cursor to
the right during
menu mode.
Channel down
Moves cursor downward during
menu mode.
Channel up
Moves cursor upward during
menu mode.
Reduces volume
Moves cursor to
the left during
menu mode.
Remote control sensor
Within about 23 feet (7 meters) in front of the
TV set.
Main POWER switch
Press to turn the TV’s main power on/off.
(see page 9)
<Top Side Controls>
Channel Up/Down
Volume Up/Down
TV/VIDEO button
SLEEP button
Set the sleep time to turn the TV
into standby mode.
30 60
0
90
• When 3 minutes left, “ 3 ”
will flash. (“2” for 2 minutes and
“1” for 1 minute).
• The SLEEP timer is cancelled
when the power is turned off.
VIDEO1 VIDEO2
TV
COMPONENT
13
Tuning Channels
Automatically scans and stores all the TV channels.
Notes:
•
When any button is pressed during AUTO PROGRAM,
the TV will return to the normal viewing. (Channels
searched up to the point are added.)
• After AUTO PROGRAM finishes, the lowest channel
number added will be displayed.
•
When there are no receivable channels, channel 69
(for TV) or channel 125 (for cable TV) is displayed.
Press to select PROGRAM CH.
Press to display the PROGRAM
CHANNELS screen.
2
3
Press to select MODE.
Press to select TV or CABLE.
4
5
Channels will automatically advance until all channels
have been scanned. Channel numbers with video
signal received will be stored in the Channel Memory.
Automatic channel programming
Press the TV/VIDEO button to display the TV channel.
1
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
AUTO PROGRAM
Activate
"AUTO PROGRAM?"
YES NO
AUTO PROGRAM
In "AUTO PROGRAM"
CHANNEL
59
PROGRAM CHANNELS
MODE
AUTO PROGRAM
MANUAL PROGRAM
TV
CABLE
Press the MENU button to display the MENU screen and select SET UP.
Press to select MANUAL
PROGRAM.
Press to display the MANUAL
PROGRAM screen.
4
Press to select the channel.
You can also use the
numbered buttons.
5
6
Press to add the channel to
the Channel Memory (the
channel number turns
blue).
Press to delete the channel
from the Channel Memory
(the channel number turns
yellow).
Manual channel programming
Add or delete a channel manually.
PROGRAM CHANNELS
MODE
AUTO PROGRAM
MANUAL PROGRAM
TV
CABLE
MANUAL PROGRAM
ENTER CHANNEL
121
Press to select AUTO
PROGRAM.
Press to display the AUTO
PROGRAM screen.
• Repeat steps 5 and 6 for other channels.
Press to select YES.
Press to start AUTO
PROGRAM.
14
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
ENTER CODE FIRST
OFF ON
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
CHANGE CODE
OFF ON
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
CHANGE CODE
OFF ON
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
CHANGE CODE
OFF ON
Press to select LOCK.
Press to display the
LOCK screen.
3
Press to select BLOCK PROGRAMS.
Press to select U.S. MOVIES, U.S. TV
PROGRAMS, CANADIAN ENGLISH
or CANADIAN FRENCH.
4
Press to select STATUS.
Press to select ON or OFF.
OFF : Can view all programs.
ON : Cannot view programs locked in
CHANGE SETTING.
Press to select CHANGE SETTING.
Press to enter the next menu.
5
2
1
Input 4-digit code.
• To clear the numbers while entering the code, press Up
or Down
.
• You will need the code to enter the LOCK menu.
• After entering your password for the first time, ENTER
CODE FIRST will change to CHANGE CODE.
Note:
Use a code that is easy to remember and record it in a safe
place.
V-Chip technology allows parents to use the TV rating codes to block programs that they feel are inappropriate
for their children to watch.
LOCK
Press the MENU button to display the MENU screen and select SET UP.
15
LOCK
Press to select VIEW NR PROGRAMS?.
Press to select NO or YES.
NO :
Cannot view programs with NR signals.
YES : Can view programs with NR signals.
U.S. TV PROGRAMS
6
8
Press to select SETTING.
Press to select BASIC or DETAILED.
BASIC : You can select the titles.
DETAILED : You can select the titles and
options.
7
Press to select the rating.
Press to lock or unlock the rating.
Lock : Red
Unlock: Green
• When a title field is selected, all ratings below this rating are selected.
• When options within an option field are selected, ratings below this
rating within the same field are selected.
Title Option
9
This TV features the “V-Chip technology” which allows you to use U.S. TV PROGRAMS Guide ratings to
block various types of TV programs.
NR
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
FV
V
S
L
D
Not Rated. See Customer Caution on page 17.
All children. The themes and elements in this program are specifically designed for a
very young audience, including children from ages 2-6.
Directed to older children. Themes and elements in this program may include mild physical
or comedic violence, or may frighten children under the age of 7.
General audience. It contains little or no violence, no strong language, and little or no
sexual dialogue or situations.
Parental guidance suggested. The program may contain infrequent coarse language,
limited violence, some suggestive sexual dialogue and situations.
Parents strongly cautioned. This program may contain sophisticated themes, sexual
content, strong language and more intense violence.
Mature audiences only. This program may contain mature themes, profane language,
graphic violence, and explicit sexual content.
FANTASY/CARTOON VIOLENCE
VIOLENCE
SEX
OFFENSIVE LANGUAGE
DIALOGUE WITH SEXUAL CONTENT
VIEW NR PROGRAMS?
U. S. TV PROGRAMS
TV
–
G
TV
–
PG
TV
–
1 4
TV
–
MA
V
V
V
D
D
L
L
L
S
S
S
TV
–
Y
TV
–
Y7
FV
SETTING BASIC
NO YES
16
LOCK
The V-CHIP used in this TV allows you to block various types of movies and television programs based on
the two rating systems used in Canada. It also lets you block or unblock Canadian French programs according
to various ratings categories.
U.S. MOVIES
6
7
Press to select the rating.
CANADIAN ENGLISH / CANADIAN FRENCH
6
Press to select VIEW E
PROGRAMS?.
Press to select NO or
YES.
NO : Cannot view
programs with
E signals.
YES : Can view
programs with
E signals.
Press to select VIEW NR PROGRAMS?.
Press to select NO or YES.
NO : Cannot view programs with NR
signals.
YES: Can view programs with NR
signals.
7
Press to select the rating.
Press to lock or unlock the rating.
Lock : Red
Unlock: Green
Press to lock or unlock the rating.
Lock : Red
Unlock: Green
This TV features the “V-Chip technology” which allows you to use Motion Picture Ratings when viewing
movies or video tapes. This innovation allows parents to block various types of movies and video tapes at
their discretion.
NR
G
PG
PG-13
R
NC-17
X
CONTAINS NO RATING (NOT RATED) AND NA (NOT APPLICABLE)
PROGRAMS. Movie has not been rated or rating does not apply.
GENERAL AUDIENCES. All ages admitted.
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children
under 13.
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NO ONE 17 AND UNDER ADMITTED.
ADULTS ONLY.
U. S. MOVIES
VIEW NR PROGRAMS?
NO YES
CANADIAN FRENCH
VIEW E PROGRAMS?
NO YES
G
8 ANS
+
13ANS
+
16ANS
+
18ANS
+
CANADIAN ENGLISH
VIEW E PROGRAMS?
NO YES
C
C8
+
G
PG
14
+
18
+
17
LOCK
The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable
and none) per FCC Rules Section15.120(e)(2). If the option of blocking “NR” programs is chosen
“unexpected and possibly confusing results may occur, and you may not receive emergency bulletins or
any of the following types of programming:”
Customer Caution
• Emergency Bulletins (Such as EAS messages, weather warnings and others)
•
Locally originated programming • News • Political • Public Service Announcements • Religious • Sports
• Weather
CANADIAN ENGLISH RATINGS CHART
CANADIAN FRENCH RATINGS CHART
E
C
C8+
G
PG
14+
18+
Exempt - Exempt programming includes: news, sports, documentaries and other
information programming, talk shows, music videos, and variety programming.
Programming intended for children under age 8. No offensive language, nudity or sexual
content.
Programming generally considered acceptable for children 8 years and over. No profanity,
nudity or sexual content.
General programming, suitable for all audiences.
Parental Guidance suggested. Some material may not be suitable for children.
Programming contains themes or content which may not be suitable for viewers under
the age of 14. Parents are strongly cautioned to exercise discretion in permitting viewing
by pre-teens and early teens.
18+ years old. Programming restricted to adults. Contains constant violence or scenes
of extreme violence.
E
G
8 ANS+
13ANS+
16ANS+
18ANS+
Exempt - Exempt programming.
General - Programming intended for audience of all ages. Contains no violence, or the
violence content is minimal or is depicted appropriately.
8+ General - Not recommended for young children. Programming intended for a broad
audience but contains light or occasional violence. Adult supervision recommended.
Programming may not be suitable for children under the age of 13 - Contains either a
few violent scenes or one or more sufficiently violent scenes to affect them. Adult
supervision strongly suggested.
Programming may not be suitable for children under the age of 16 - Contains frequent
scenes of violence or intense violence.
Programming restricted to adults. Contains constant violence or scenes of extreme
violence.
18
This unit has a built in decoder that provides a visual depiction of the audio portion of a television program
in the form of written words across the screen (white or colored letters on a black background). It allows you
to read the dialogue of a television program or other information.
Press to select CLOSED CAPTION.
Press to display the CLOSED
CAPTION screen.
1
2
Displays the On-Screen Closed Caption when the MUTE button is pressed. To delete the closed caption,
press the MUTE button again.
2
Press to select OFF, C1 or C2.
Displays the On-Screen Closed Caption.
Press to select
CC
MODE.
Press to select
CC
ON MUTE.
Press to select NO (OFF), C1 or C2.
CLOSED CAPTION
Notes:
•
To activate this feature, set CC MODE to OFF .
• The program must have Closed Caption.
CC ON MUTE
CC MODE
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
CLOSED CAPTION
MODE
OFF
ON MUTE
NO
CLOSED CAPTION
MODE
OFF
ON MUTE
NO
• OFF (NO): Recommended mode when Closed Caption is not being used.
• C1 : For video related information that can be displayed (up to 4 lines of script strategically placed on
the television screen so that it does not obstruct relevant parts of the picture).
• C2 : Another mode used for video related information.
Press the MENU button to display the MENU screen and select SET UP.
19
You can change the label of the video inputs to match with the connected device (VCR, DVD player etc.).
Press to select INPUT LABEL.
Press to display the INPUT LABEL screen.
1
2
Press to select the INPUT LABEL.
(VIDEO1/VIDEO2/COMPONENT,
VCR, LD, GAME, DVD, DTV, SKIP
∗
or [BLANK])
∗ Select to skip unused video input when pressing TV/VIDEO button.
INPUT LABEL
Press to select OTHER ADJUST.
Press to display the OTHER ADJUST screen.
1
Press to select the item.
2
Press to select the setting.
VIDEO NR
Reduce video noise in the picture.
3D Y/C FILTER
Minimizes noise and cross color in the picture. Not available for
COMPONENT VIDEO INPUT and S-VIDEO INPUT.
COLOR MATRIX
Displays input signals (480p signals) in a natural color. Automatically adjusts color parameters for HD
(high definition) and SD (standard definition).
POWER SAVE
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark room.
OFF ON
SD HD
STANDARD SAVING
OFF ON
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
OTHER ADJUST
VIDEO NR
OFF ON
3D Y/C FILTER
COLOR MATRIX
SD HD
POWER SAVE
STANDARD
OFF ON
INPUT LABEL
VIDEO1
VIDEO2
COMPONENT
VIDEO1
VIDEO2
COMPONENT
Press to select the video input
(VIDEO1, VIDEO2 or COMPONENT).
Press the MENU button to display the MENU screen and select SET UP.
OTHER ADJUST
Press the MENU button to display the MENU screen and select SET UP.
20
Sub-menu
BACK LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI PICTURE
PICTURE ADJUST
1
2
Press to select
PICTURE ADJUST.
Press to display the PICTURE
ADJUST screen.
Press to select the sub-menu.
Adjust the setting watching the picture
behind the menu.
Press to activate the setting if necessary.
BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS, AI PICTURE
You can change the sub-menu settings (BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT,
SHARPNESS and AI PICTURE) for each PIC MODE (STANDARD, CINEMA, and VIVID) according to your
personal preference.
Function
Luminance of the back light is adjusted.
Selects proper brightness and density for the room.
Adjusts for easier viewing of dark pictures such as night scenes.
Adjusts the level of color.
Adjusts for flesh tone color.
Adjusts the degree of sharpness.
Controls dark areas without affecting the black level or brightness in the overall picture.
Notes:
•“NORMAL” means the PIC MODE is in the factory default setting. “NORMAL” changes to “NORMALIZE”
when you change the setting of BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS or
AI PICTURE.
• You can normalize each PIC MODE separately.
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
OFF ON
COOLCOOL
PICTURE ADJUST
NORMAL
PIC MODE
BACK LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI PICTURE
+ 30
0
0
0
0
0
OFF ON
STANDARD
NORMAL/NORMALIZE
PIC MODE
The picture mode is stored for
TV, VIDEO1, VIDEO2 and
COMPONENT individually.
Function
Displays a clear image with high contrast.
Displays a standard image.
Ideal for watching movies in a dark room.
MODE
VIVID
STANDARD
CINEMA
Press to select
NORMALIZE.
Press OK.
•
To reset to standard setting :
PICTURE ADJUST
NORMALIZE
PIC MODE
BACK LIGHT
PICTURE
+ 5
0
STANDARD
Press the MENU button to display the MENU screen and select ADJUST.
21
AUDIO ADJUST
1
2
Press to select AUDIO ADJUST.
Press to display the AUDIO ADJUST
screen.
Press to select the sub-menu.
Select the setting listening to the sound.
Press to activate the setting if necessary.
AUDIO ADJUST
NORMAL
MODE
BASS
TREBLE
STEREO SAP MONO
+ 5
+ 3
AUTO
MODE
MODE
STEREO
SAP
MONO
Function
Two channel audio reception.
Second Audio Programming
(typically used for bilingual audio).
Select when stereo signal is weak.
Notes:
• Red display : With signal
White display : No signal
White display (All modes): MONO
• To change the mode using SAP button
(see page 12).
STEREO/SAP/MONO
Notes:
•“NORMAL” means the MODE is in the factory default setting. “NORMAL” changes to “NORMALIZE” when
you change the setting of BASS or TREBLE.
• You can normalize each MODE separately.
MODE
DYNAMIC
MUSIC
AUTO
STANDARD
Function
Gives contrast to sound.
For programs consisting mainly of music. Enhances high sounds (around 4 kHz).
Automatically adjusts for a wide Dynamic Range.
Emits the original sound.
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
BASS, TREBLE
You can change the level of each sub-
menu (BASS and TREBLE) for each
MODE (AUTO, STANDARD, DYNAMIC
and MUSIC) according to your personal
preference.
Sub-menu
BASS
TREBLE
Function
Adjusts low frequencies.
Adjusts high frequencies.
NORMAL/NORMALIZE
Press to select
NORMALIZE.
Press OK.
•
To reset to standard setting :
AUDIO ADJUST
NORMALIZE
MODE
BASS
TREBLE
+ 5
+ 1
AUTO
Press the MENU button to display the MENU screen and select ADJUST.
22
ASPECT Controls
Each time you press the button:
Notes:
• The aspect setting is stored separately for VIDEO1, VIDEO2 and COMPONENT.
• In TV mode, the aspect is fixed at 4:3.
(For Video input only)
Explanation
4:3 mode will display a 4:3 picture at its standard
4:3 size without any stretching.
16:9 mode will display 16:9 aspect ratio picture.
Bars can be seen at the top and bottom of the
image (not available in TV mode).
Mode
4 : 3
16 : 9
Picture
4 : 3
16 : 9
16 : 9
4 : 3
This feature allows you to enjoy viewing the picture at its maximum size, including wide screen cinema
format picture.
23
Precauciones relacionadas con la utilización de las pilas
La instalación incorrecta de las pilas puede causar fugas en las mismas que podrían estropear el transmisor
de mando a distancia.
Tome las precauciones siguientes:
1. Utilice siempre pilas nuevas cuando reemplace las viejas.
2. No intente cargar, cortocircuitar, desarmar, calentar o quemar las pilas usadas.
3. Las pilas deberán cambiarse cuando el mando a distancia funcione esporádicamente o no pueda
controlar esta unidad.
Se necesitan dos pilas AA.
2. Instale las pilas y vuelva a poner la tapa. Tenga en
cuenta las polaridades (+ y -) al instalar las pilas.
Manual de instrucciones [ Resumen ]
Estimado cliente de Panasonic
Bienvenido a la familia de clientes de Panasonic.
Esperamos sinceramente que disfrute durante muchos años de su nuevo Esperamos
sinceramente que disfrute durante muchos años de su nuevo televisor LCD.
Para obtener el máximo beneficio de su aparato, lea estas instrucciones antes de hacer
cualquier ajuste, y guárdelas para poder utilizarlas como referencia en el futuro.
Guarde también el recibo de su compra, y anote el número del modelo y el número de
serie de su aparato en el espacio provisto en la cubierta posterior de estas instrucciones.
30 30
• TC-17LA2
El ángulo del soporte se puede ajustar entre 5° hacia delante y 15°
hacia atrás, y se puede girar 30° hacia la derecha/izquierda.
Ajuste el soporte con el ángulo deseado
• TC-17LA2D
El ángulo del soporte está fijado
en 14° hacia atrás.
Frente
Frente
Instalación de las pilas del mando a distancia
1. Abra la cubierta de
las pilas.
Frente
24
DC IN 15V
PS TBMU428
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
DC IN 15V
PS TBMU428
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
DC IN 15V
PS TBMU428
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
DC IN 15V
PS TBMU428
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
Conexiónes
Para colocar y quitar la adaptador F (Ángulo recto)
Nota:
Con este aparato no se suministran cables ni conectores.
Adaptador F
Terminal
de
antenal
Terminal
de
antena
Para colocarla [TC-17LA2] Para quitarla [TC-17LA2D]
• Para recibir los canales de televisión por cable (01 - 125) conecte el cable suministrado por su compañía
de televisión por cable. El modo de antena debe ajustarse a CABLE (consulte la página 29, MODO).
•
Ciertos sistemas de televisión por cable neutralizan algunos canales para reducir interferencias o tienen canales especiales
(codificados). Para recibir correctamente estos canales se necesita un sintonizador de conversión de televisión por
cable. Póngase en contacto con su compañía de televisión por cable para conocer los requerimientos de compatibilidad.
• Ponga el canal del televisor en CH3 o CH4 cuando utilice esta conexión.
Conexión del receptor de TV por cable
Cable entrante de 75 ohmios
procedente compañía de
televisión por cable
La parte posterior del televisor
Receptor de TV por cable
Receptor de TV por cable y Videograbadora
Cable coaxial de 75 ohmios
Conector de antena tipo F
Cable entrante de 75 ohmios
procedente compañía de
televisión por cable
La parte posterior del televisor
Conector de antena tipo F
Cable coaxial
de 75 ohmios
La parte posterior del televisor
Videograbadora
ANT OUTPUT ANT INPUT
Conexión de antena
Para recibir correctamente los canales de VHF/UHF se requiere una antena externa. Para obtener la mejor recepción se
recomienda utilizar una antena para exteriores. El modo de antena debe ajustarse a TV (consulte la página 29, MODO).
[TC-17LA2] [TC-17LA2D]
La parte posterior del televisor
Terminal
de antena
Conector de
antena tipo F
Conector
de antena
tipo F
F-Adapter
Cable coaxial de 75 ohmios
OUTPUT
INPUT
Receptor de TV por cable
OUTPUT
INPUT
Receptor de TV por cable
Mezclador
Antena de VHF
Antena de UHF
Cuando se hace la instalación habiendo
poco espacio detrás del televisor:
(Ejemplo: Utilizando ménsulas de montaje en
pared, haga la instalación cerca de una pared.)
El cable de la antena se puede doblar y
dañar cerca del conector si se utiliza el
adaptador F para hacer la conexión. En
tales casos, retire el adaptador F y
conecte el cable de antena directamente.
25
Canal 6
ESTEREO
SPA
MONO
4 : 3
Conexiónes
POWER
TV/VIDEO VOLUME CHANNEL
POWER
Conexión/desconexión de la alimentación
Conexión de la clavija la toma de corriente.
Púlselo para conectar/desconectar la
alimentación principal del televisor.
• Indicador de la alimentación
Alimentación principal conectada : Verde
Alimentación principal desconectada: Apagado
Ej.:
Sensor de mando
a distancia
Interruptor POWER principal
Indicador de la alimentación
Púlselo para encender/apagar el televisor.
• Indicador de la alimentación
Encendido : Verde
Apagado (En espera) : Rojo
• Esto no funciona cuando la alimentación
principal está desconectada (apagado)
(consulte arriba).
Nota:
Seleccione el idioma de menú antes de utilizar
el televisor (consulte la página 27, Idioma).
Notas:
• El televisor y el adaptador de CA
consumirán algo de energía siempre que
el cable de CA esté conectado a la toma
de corriente.
•
Asegúrese de utilizar el cable de CA y el
adaptador de CA incluidos en los accesorios.
• La utilización de adaptadores de CA
diferentes de los especificados puede
causar fallos en el funcionamiento.
Cable de alimentación
CA 120 V, 60 Hz
En el aparato principal
En el mando a distancia
La pantalla de abajo se visualiza durante un rato
cuando se enciende el televisor.
Conexión de auriculares
(No suministrado)
Clavija M3
2
1
3
DC IN 15V
PS TBMU428
26
Operaciones con menús
Púlselo para visualizar la
pantalla MENU.
1
MENU
Ajuste
Imagen
Sonido
Configu.
Ajuste Imagen
Ajuste Sonido
Cuadro de instrucciones de ayuda en pantalla
Cuando se visualiza un menú en el televisor aparece un cuadro
de ayuda en la pantalla. Este cuadro de ayuda indica qué teclas
del mando a distancia se utilizan para navegar por el menú
mostrado.
PROGRAMA MANUAL
Entre Canal
121
VUELVE
ANULAR
SEL CANAL
MENU
Ajuste Configu.
Idioma
Prog. Canales
Bloqueo
Subtítulos
Ponga Títulos
Otro Ajuste
MENU
Ajuste
Imagen
Sonido
Configu.
Ajuste Imagen
Ajuste Sonido
MENU
Ajuste Configu.
Idioma
Prog. Canales
Bloqueo
Subtítulos
Ponga Títulos
Otro Ajuste
MENU
Ajuste
Imagen
Sonido
Configu.
Ajuste Imagen
Ajuste Sonido
o
2
27
•
Para volver a la pantalla anterior :
•
Para salir de la pantalla MENU :
Púlselo para seleccionar la pantalla MENU (Ajuste o Configu.).
Púlselo para seleccionar la función de menú secundario.
Púlselo para visualizar la pantalla de menú secundario.
Con esto se retorna a la visión normal.
No
MODO
No
EN MUDO
Idioma
Idioma
Seleccione el idioma del
menú.
Ajuste Imagen
Normal
Imagen
Luz Posterior
CONTRASTE
BRILLO
COLOR
TINTE
NITIDEZ
Imagen IA
+ 30
0
0
0
0
0
Normal
No Si
Bloqueo
Programas:
Activado
Modificar
INGRESAR CLAVE
No Si
Otro Ajuste
REDUC DE RUIDO
Matriz Color
DS HD
ECON ENERGíA
ESTÁNDAR
No Si
3D Y/C Filtro
No Si
Ajuste Sonido
Normal
Sonido
BAJOS
ALTOS
ESTEREO SPA MONO
+ 5
+ 3
Auto
Prog. Canales
MODO
PROGRAMA AUTO
PROGRAMA MANUAL
TV
CABLE
Video1
Video2
Componente
Video1
Video2
Componente
Operaciones con menús
28
POWER
TV/VIDEO VOLUME CHANNEL
Controles básicos
Sensor de mando a distancia
Dentro de 23 pies (7 metros) a partir del panel
delantero del televisor.
Interruptor POWER principal
Púlselo para conectar/desconectar la
alimentación principal del televisor
(consulte la página 25).
<Controles del lado superior>
Canal superior/inferior
Subida/bajada del volumen
Botón TV/VIDEO
Botón SLEEP
Ponga el tiempo tras el cual el
televisor se pondrá en el modo
de espera.
• Cuando queden 3 minutos
parpadeará “
3” (“2” para 2
minutos y “1” para 1 minuto).
• El temporizador de cancelado
se cancelará cuando se
desconecte la alimentación.
Botón de la alimentación
Púlselo para encender o apagar el
televisor (consulte la página 25).
Nota:
Esto no funciona cuando la
alimentación principal está
desconectada (apagado).
Botones numerados
Botón TV/VIDEO
Púlselo para cambiar el modo de
entrada.
Botón R-TUNE
Púlselo para cambiar a un canal o modo
de vídeo anterior.
No resulta efectivo bajo las condiciones
siguientes:
1.
Justo después de encender el televisor.
2. Después de cambiar TV / CATV
(MODO en Prog. Canales).
3. Justo después de la ejecución de ACP
(programación automática de canales).
4. Cuando se selecciona el mismo canal
que el canal actual.
Botón MUTE
Púlselo para silenciar el sonido.
Púlselo de nuevo para cancelar el silenciamiento.
El silenciamiento se cancela cuando se desconecta la
alimentación o se cambia en nivel del sonido.
Botón ASPECT
Botón MENU
(consulte la página 26)
Botón RETURN
Púlselo para volver a la pantalla anterior.
Botón RECALL
Púlselo para visualizar el número
del canal, el temporizador de
cancelado y otras opciones.
Botón SAP
Púlselo para seleccionar el modo de
audio. También puede cambiar el
modo en la pantalla MENU.
ESTEREO SPA MONO
30 60
0
90
Aumenta el volumen
Mueve el cursor
hacia la derecha
durante el
modo
del menú.
Canal inferior
Mueve el cursor hacia abajo durante el
modo del menú.
Canal superior
Mueve el cursor hacia arriba durante el
modo del menú.
Reduce el volumen
Mueve el cursor
hacia la izquierda
durante el
modo
del menú.
4 : 3 16 : 9
Video1 Video2
TV
Componente
29
Sintonización de canales
Pulse para seleccionar Prog. Canales.
Pulse para visualizar la pantalla
Prog. Canales.
2
3
Pulse para seleccionar MODO.
Pulse para seleccionar TV o CABLE.
Pulse el botón TV/VIDEO para visualizar el canal de TV.
1
Explora y guarda automáticamente todos los canales
de TV.
Programación automática de canales
4
5
PROGRAMA AUTO
Activar
"PROGRAMA AUTO?"
Si No
4
5
6
PROGRAMA AUTO
En Programa Auto
Canal 59
Los canales avanzarán automáticamente hasta que
todos ellos hayan sido explorados. Los números de
los canales con señal de vídeo recibida se guardarán
en la memoria de canales.
Notas:
• Cuando se pulse cualquier botón durante
PROGRAMA AUTO, el televisor volverá a mostrar
la imagen normal. (Los canales encontrados hasta
ese punto se añaden.)
• Después de terminar PROGRAMA AUTO se
visualizará el número del canal más bajo añadido.
• Cuando no haya canales que puedan recibirse, se
visualizará el canal 69 (para TV) o el canal 125
(para TV por cable).
Pulse para seleccionar
PROGRAMA MANUAL.
Pulse para visualizar la
pantalla PROGRAMA
MANUAL.
Púlselo para añadir el canal
a la memoria de canales (el
número del canal se pone de
color azul).
Púlselo para borrar el
canal de la memoria de
canales (el número del
canal se pone amarillo).
Añada o borre un canal manualmente.
Programación manual de canales
Prog. Canales
MODO
PROGRAMA AUTO
PROGRAMA MANUAL
TV
CABLE
PROGRAMA MANUAL
Entre Canal
121
Pulse el botón MENU para visualizar la pantalla MENU y seleccione Configu.
• Repita los pasos 5 y 6 para otros canales.
MENU
Ajuste Configu.
Idioma
Prog. Canales
Bloqueo
Subtítulos
Ponga Títulos
Otro Ajuste
Prog. Canales
MODO
PROGRAMA AUTO
PROGRAMA MANUAL
TV
CABLE
Pulse para seleccionar
PROGRAMA AUTO.
Púlselo para visualizar la
pantalla PROGRAMA AUTO.
Púlselo para seleccionar Si.
Púlselo para iniciar
PROGRAMA AUTO.
Pulse para seleccionar canal.
También puede utilizar los
botones numerados.
30
Troubleshooting
If there is a problem with your TV please refer to the table below to determine the symptoms, then carry out the
suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the
model number and serial number (both found on the rear of the TV).
Symptoms
Checks
Antenna location, direction or connection
Picture Sound
Aerial location, direction or connection
Electrical appliances
Cars / Motorcycles
Fluorescent lights
Volume level
Sound mute switched on.
Color controls set at minimum levels.
Weak signal.
Retune Channel (s).
Sound reception may have deteriorated.
Switch STEREO mode (AUDIO ADJUST menu) to
Off until reception improves.
Noisy Sound
Normal Sound
No Sound
No Sound
Normal Sound
Noisy Sound
Weak or No Sound
Weak or No Sound
Interference
Multiple Image
Normal Picture
No Picture
No Colour
Snowy Picture
Normal Picture
Poor or Distorted Picture
Cannot operate with the remote control.
The battery is exhausted.
The battery’s polarity is wrong.
The remote control sensor is exposed to strong light of a
fluorescent lamp, etc.
The main unit is hot.
The main unit radiates heat and some of the parts may
become hot. This is not a problem for performance or quality.
Set up at a location with good ventilation.
Do not cover the ventilation holes of the TV with a
tablecloth etc., and do not place on top of other equipment.
There may be red spots, blue spots, green
spots and black spots on the screen.
This is a characteristic of liquid crystal panels and is not a
problem. The liquid crystal panel is built with very high
precision technology giving you fine picture details.
Occasionally, a few non-active pixels may appear on the
screen as a fixed point of red, blue, green, or black.
Please note this does not affect the performance of your LCD.
TV set to Video Input mode.
Not plugged into AC outlet.
Not switched on.
Picture / Sound controls set at minimum levels.
Check if in Standby mode.
31
Specifications
AC 120 V, 60 Hz
Average use : 36 W
Stand-by condition : 0.6 W
Power off : 0.4 W
TV set DC:15V, 3.6A max.
17-inch (432 mm), 4:3 aspect ratio LCD panel
VGA (640 × 480 pixels)
13.53 ″ (343.7 mm) (W) × 10.30 ″ (261.6 mm) (H)
VHF-12 : UHF-56 : Cable-125
9 × 5 cm, 2 pcs, 16 Ω
6 W [3 W + 3 W] (10% THD)
M3 (3.5 mm) Jack × 1
3D Y/C Digital Comb Filter
CLOSED CAPTION V-Chip
Temperature : 41 °F - 95 °F (5 °C – 35 °C)
Humidity : 5 % - 90 % RH (non-condensing)
VIDEO (RCA PIN Type × 1) × 2 1.0 Vp-p
(75
Ω
)
S-VIDEO (MINI DIN 4pin × 1) × 2
Y : 1.0 Vp-p (75 Ω), C : 0.286 Vp-p (75 Ω)
AUDIO L-R (RCA PIN Type × 2) × 2
0.5 Vrms
Y × 1
1.0 Vp-p (including synchronization)
P
B
/ P
R
× 1 ±
0.35
Vp-p
AUDIO L-R (RCA PIN Type × 2) × 1
0.5 Vrms
17 21/64 ″ (440 mm) × 17 21/64 ″ (440 mm) ×
17 63/64 ″ (457 mm) × 15 3/4 ″ (400 mm) ×
10 15/64 ″ (260 mm) 7 21/64 ″ (186 mm)
17 21/64 ″ (440 mm) × 15 25/32 ″ (401 mm) × 3 35/64 ″ (90 mm)
14.8 lb. (6.7 kg) Net 12.6 lb. (5.7 kg) Net
Power Source
Power Consumption
LCD
Screen Size
Channel Capability
Sound
Speaker
Audio Output
Headphones
FEATURES
Operating Conditions
Connection Terminals
INPUT
COMPONENT
VIDEO INPUT
Dimensions ( W × H × D )
Including TV Stand
TV Set Only
Mass (Weight)
TC-17LA2 TC-17LA2D
Note:
Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus
New Jersey 07094
Panasonic Sales Company,
Division of Matsushita Electric
of Puerto Rico Inc. (“PSC”)
Ave. 65 de Infanteria, Km 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Printed in Japan
MBS0404S0
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
Customer’s Record
The model number and serial number of this product can be found on its rear panel. You should
note this serial number in the space provided below and retain this book, plus your purchase
receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss,
and for Warranty Service purposes.
Model Number Serial Number
2004 Matsushita Electric Industrial Co.,Ltd. All Rights Reserved.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
Panasonic TC17LA2D Instrucciones de operación
- Tipo
- Instrucciones de operación
- Este manual también es adecuado para
En otros idiomas
Documentos relacionados
-
Panasonic TC20LA1 Manual de usuario
-
-
-
-
-
-
-
Panasonic TC32LX20 Instrucciones de operación
-
-
Panasonic TC20LA5 - 20" LCD COLOR TV Instrucciones de operación