Panasonic TC20LB30 Instrucciones de operación
- Tipo
- Instrucciones de operación
TQBC0784
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
English
Model No.
TC-20LB30
For assistance, please call : 1-800-211-PANA (7262)
or send e-mail to : [email protected]
or visit us at www.panasonic.com (U.S.A.)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com (Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca (Canada)
Espan˜ol
[Resumen]
Operating Instructions
LCD TV
2
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are in
the papers with the appliance.
■ Note to CATV System Installer: This reminder is provided to direct the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the building, as close to the point of
cable entry as practical.
■ Important Safety Instructions for LCD TV
1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water. For example: Avoid placing it near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
6) Clean only with dry cloth. Unplug this LCD TV from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure
reliable operation of the LCD TV and to protect it from overheating. These openings must not be blocked
or covered. There should be at least 10 cm of space from these openings. The openings should never
be blocked by placing the LCD TV on a bed, sofa, rug or other similar surface. This LCD TV should not
be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11)
Only use attachments/accessories specified by the manufacturer. Otherwise it may cause hazards.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time. This will prevent
damage to the receiver due to lightning and power-line surges.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Upon completion of any service or repairs to this LCD TV, ask the service technician to perform routine
safety checks to determine that the television is in safe operating condition.
15) Operate only from the type of power source indicated on the marking label. If you are not sure of the
type of power supplied to your home consult your television dealer or local power company.
16) Follow all warnings and instructions marked on the LCD TV.
17) Never push objects of any kind into this LCD TV through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the LCD TV.
The lightning flash with arrow
head within a triangle is intended
to tell the user that parts inside
the product are a risk of electric
shock to persons.
3
18) If an outside antenna is connected to the
television
equipment, be sure the antenna system
is grounded so as to provide some protection
against voltage surges and built up static
charges. In the U.S. Selection 810-21 of the
National Electrical Code provides information
with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
19) An outside antenna system should not be located
in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing
an outside antenna system extreme care should
be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
20) Unplug this LCD TV from the wall outlet, and refer servicing to qualified service personnel under the
following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the LCD TV.
c. If the LCD TV has been exposed to rain or water.
d. If the LCD TV does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore
the LCD TV to normal operation.
e. If the LCD TV has been dropped or the cabinet has been damaged.
f. When the LCD TV exhibits a distinct change in performance - this indicates a need for service.
21) When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
22) WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES, CUPS, COSMETICS, ETC.)
ABOVE THE SET. (INCLUDING ON SHELVES ABOVE, ETC.)
23) CAUTION : TO PREVENT ELECTRIC SHOCK DO NOT USE THIS PLUG WITH A RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
24) CAUTION : USE WITH OTHER STAND MAY RESULT IN INSTABILITY CAUSING POSSIBLE INJURY.
25) CAUTION : DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
Important Safety Instructions
EXAMPLE OF ANTENNA
GROUNDING AS PER (NEC)
NATIONAL ELECTRICAL
CODE
GROUND
CLAMP
ANTENNA
LEAD-IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
■
Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays.
The extended use of fixed image program material can cause a permanent "shadow image" on the LCD panel.
This background image is viewable on normal programs in the form of a stationary fixed image. This type of
irreversible LCD panel deterioration can be limited by observing the following steps:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.
■
This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury. Disposal of
these materials may be regulated in your community due to environmental considerations. For disposal or recycling
information please contact your local authorities, or the Electronics Industries Alliance:
www.eiae.org.
NOTE:
•
This equipment is designed to operate in North America and other countries where the broadcasting
system and AC house current is exactly the same as in North America.
•
The marking or retained image on the LCD panel resulting from fixed image use is not an operating
defect and as such is not covered by Warranty. This product is not designed to display fixed
image patterns for extended periods of time.
4
Dear Panasonic Customer
Welcome to the Panasonic family of customers.
We hope that you will have many years of enjoyment from your new LCD TV.
To obtain maximum benefit from your set, please read these instructions before
making any adjustments, and retain them for future reference.
Retain your purchase receipt, and record the model number and serial number
of your set in the space provided on the rear cover of these instructions.
This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause or receive interference, which can be determined by turning
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the TV antenna.
Increase the separation between TV and other equipment.
Connect TV into separate outlet from other equipment.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications not expressly
approved by Matsushita Electric Corporation of America could result in harmful interference and would void
the user’s authority to operate this equipment.
For assistance, please call : 1-800-211-PANA (7262)
or send e-mail to : [email protected]
or visit us at www.panasonic.com (U.S.A.)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com (Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca (Canada)
Federal Communication Commission Information
The ENERGY STAR label, a symbol for energy efficiency, was created by the U.S.
Environmental Protection Agency (EPA) and the U.S. Department of Energy
(DOE) to help customers identify products that can save them money and protect
the environment by saving energy. ENERGY STAR
compliant products generally
consume less energy than similar standard products.
5
Table of Contents
Important Safety Instructions .............................. 2
SUPPLIED ACCESSORIES ................................... 5
Installation ............................................................. 6
Remote control battery installation ...................... 6
Connections .......................................................... 7
Antenna Connection ............................................ 7
Cable Box Connection ......................................... 7
Connecting Other Equipment .............................. 8
Connecting Headphones / Earphones ................. 9
Power ON / OFF ..................................................... 9
Basic Controls ..................................................... 10
Menu Operations ................................................. 11
Tuning Channels ................................................ 12
LOCK ................................................................. 14
CLOSED CAPTION ........................................... 18
INPUT LABEL .................................................... 19
OTHER ADJUST ............................................... 19
PICTURE ADJUST ............................................ 20
AUDIO ADJUST................................................. 21
ASPECT Controls ................................................ 22
Photo Viewer ....................................................... 23
Thumbnail Mode ................................................ 24
Photo Viewer Setup Menu ................................. 25
Troubleshooting .................................................. 34
Specifications ...................................................... 35
Maintenance ........................................................ 35
Manual de instrucciones [ Resumen ]
Ajuste el soporte con el ángulo deseado ... 26
Instalación de las pilas del mando a distancia ...
26
Conexión ....................................................... 27
Conexión de antena .....................................27
Conexión del receptor de TV por cable ........ 27
Conexión de auriculares ...............................28
Conexión/desconexión de la alimentación ...
28
Controles básicos......................................... 29
Operaciones con menús .............................. 30
Sintonización de canales ..............................31
Photo Viewer ................................................. 33
Mode de imagen miniatura ........................... 33
TV
Check the accessories before installations.
• Operating Instruction book • Remote Control Transmitter
(EUR7726040)
SUPPLIED ACCESSORIES
• Batteries for the Remote
Control Transmitter
(2 × AA size)
• Warranty Card • Service Center List
(For U.S.A.)
• Customer Card
(For U.S.A.)
• Customer Care Plan Card
(For U.S.A.)
6
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Observe the following precautions:
1. Always use new batteries when replacing the old set.
2. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
3. Battery replacement is necessary when remote control acts sporadically or fails to operate this unit.
Requires two AA batteries.
1. Open the battery cover. 2. Install the batteries and replace the cover.
Note the correct polarity (+ and -).
Remote control battery installation
Installation
Receiver Location
Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For best performance,
Antenna cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various
components require. Also determine the length of cable you’ll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed
clearly. Turn off florescent lamps near the LCD and place in a location not exposed to outdoor light.
How to hang the LCD TV on the wall
This LCD TV is for use only with the following optional accessory. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
•
Wall-hanging bracket ........................................................ TY-WK22LR1W
Always be sure to ask a qualified technician to carry out set-up.
How to use the LCD stand
Adjust the stand to your desired angle.
The stand angle can be adjusted between 5° forward to 10° back, and rotated 20° to the right/left.
10 5
20
20
Front
Front
Notes:
• Do not drop, apply shock to or step on the remote control.
• Do not spill water on the remote control.
• Do not place objects between the remote control and remote control receiver.
• Do not use remote control for other equipment at the same time.
• If the TV does not operate even when using the remote control from a close range, it is time to replace the
batteries.
Refer to the label on back of the remote control for directions on replacing batteries.
7
Connections
Antenna Connection
For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor
antenna is recommended. The antenna mode must be set to TV (see page 12, MODE).
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
ANT
ANT
75 Ohm
Coaxial Cable
Mixer
UHF AntennaVHF Antenna
Antenna Terminal
F-Type Antenna
Connector
Note:
Cables and connectors are not supplied with this set.
Back of the TV
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
ANT
ANT
Incoming 75 Ohm Cable
from Cable Company
Back of the TV
• For reception of cable channels (01 - 125), connect the cable supplied by your local cable company. The
antenna mode must be set to CABLE (see page 12, MODE).
• Certain cable systems offset some channels to reduce interference or view Premium (scrambled) channels.
A cable converter box is required for proper reception. Check with your local cable company for its
compatibility requirements.
• Set the TV channel to CH3 or CH4 when using this connection.
Cable Box Connection
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
ANT
ANT
Incoming 75 Ohm Cable
from Cable Company
Back of the TV
Cable Box
Cable Box and VCR
CABLE BOX
OUTPUT
INPUT
VCR
ANT OUTPUT ANT INPUT
CABLE BOX
OUTPUT
INPUT
8
Connecting Other Equipment
Connections
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
ANT
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
PrPbY
L
R
L
R
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
ANT
Audio
OUT
S-Video
OUT
Video
OUT
COMPONENT VIDEO OUT
Audio
OUT
Notes:
• Only 480i and 480p are available through the component input terminals.
• When connecting video cables, priority is given to the S-Video cable when both the S-VIDEO input terminal
and the VIDEO input terminal are connected.
• With a monaural VCR, connect the monaural audio cable to the AUDIO-L terminal.
• Please make inquiries to video game manufacturers concerning component cables to connect with video
game console.
AUDIO
cable
DVD/STB
COMPONENT
VIDEO cable
AUDIO
cable
VIDEO
cable
S-VIDEO cable
Super-VHS VCR
CAMCORDER
VIDEO GAME
CONSOLE
Note:
Do not put the antenna cable
and the power cord together
to avoid noise.
To bundle the cables
with the clamper
1. Pull upward.
2. Put the cables and close.
9
CH 6
STEREO
SAP
MONO
4 : 3
ANT
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
Connections
Power ON / OFF
Preparation
Connect the plug to the wall outlet.
Note:
The TV consumes some power as long as the power
cord is inserted into the wall outlet.
Press to turn the TV’s main power on/off.
• Power indicator
Main power ON : Green
Main power OFF : No light
The screen below is displayed for a few moments when the
TV is turned on.
Remote
control sensor
Main POWER switch
Power cord
AC120V, 60Hz
On the main unit
POWER
R-STANDBY / G-POWER ON
TV/VIDEO VOLUME CHANNEL
POWER
e.g.
Power Indicator
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
ANT
(Not supplied)
Connecting Headphones / Earphones
M3 plug
Press to turn the TV on/off.
• Power indicator
Power ON : Green
Power OFF (Standby) : Red
• This does not work when the main power is off
(No light) (see above).
Note:
Select the menu language in LANGUAGE of SET
UP menu (see page 11) before operating the TV.
On the remote control
10
POWER
TV/VIDEO VOLUME CHANNEL
EJECT
STEREO SAP MONO
Basic Controls
POWER button
Press to turn the TV on or off
(see page 9).
Note:
This does not work when the main
power is off (No light).
Numbered buttons
∗
TV/VIDEO button
Press to change the input mode.
R-TUNE button
∗
Press to switch to previously viewed
channel or to switch between TV mode
and another input mode.
Not effective under the following
conditions:
1. Right after the TV is turned on.
2. After switching TV / CATV (MODE in
PROGRAM CHANNELS).
3. Right after the ACP (Automatic
channel programming) execution.
4. When the same channel as the
present channel is selected.
MUTE button
∗
Press to mute the sound.
Press again to cancel mute.
Mute is canceled when the
power is turned off or volume
level is changed.
ASPECT button
∗
(see page 22)
MENU button
(see page 11)
RETURN button
Press to return to the previous screen.
RECALL button
∗
Press to display channel number,
sleep timer and other options.
SAP button
∗
Press to select the audio mode (see also
page 21, AUDIO ADJUST).
Note:
For input signals, change the audio
mode on the connected equipment.
Increases volume
Moves cursor to
the right during
menu mode.
Channel down
Moves cursor downward during
menu mode.
Channel up
Moves cursor upward during
menu mode.
Reduces volume
Moves cursor to
the left during
menu mode.
Remote control sensor
Within about 23 feet (7 meters) in front of the TV set.
Main POWER switch
Press to turn the TV’s main power
on/off. (see page 9)
<Top Side Controls>
Channel Up/Down
Volume Up/Down
TV/VIDEO button
SLEEP button
Set the sleep time to turn the TV
into standby mode.
30 60
0
90
• When 3 minutes left, “ 3 ”
will flash. (“2” for 2 minutes and
“1” for 1 minute).
• The SLEEP timer is cancelled
when the power is turned off.
VIDEO1 VIDEO2
TV
COMPONENT
SD card slot (see page 24)
PC CARD
EJECT button
(see page 24)
PC CARD slot
(see page 24)
SD button
Press to access Photo Viewer
(see
page 24).
∗ Does not work in Photo Viewer mode.
11
Menu Operations
1
2
3
Press to display MENU screen.
Press to select the MENU screen (ADJUST
or SET UP).
Press to select the sub-menu feature.
Press to display the sub-menu screen.
•
To return to the previous screen:
•
To exit the MENU screen: This returns TV to normal viewing.
Notes:
• Select the menu language in LANGUAGE of SET UP menu before operating
the TV.
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
MANUAL PROGRAM
ENTER CHANNEL
121
RETURN
DELETE
CH SELECT
ADD
LANGUAGE
ENGLISH
LANGUAGE
OR
• LANGUAGE, PROGRAM CH, LOCK, CLOSED
CAPTION and AUDIO ADJUST are not activated
in Photo Viewer mode.
• An On Screen Help box is displayed when a
menu is displayed on the TV. This Help box
indicates which keys on the remote control are
used to navigate the menu shown.
12
Tuning Channels
Automatically scans and stores all the TV channels.
Notes:
• When any button is pressed during AUTO PROGRAM, the TV will return to the normal viewing. (Channels
searched up to the point are added.)
• After AUTO PROGRAM finishes, the lowest channel number added will be displayed.
• When there are no receivable channels, channel 69 (for TV) or channel 125 (for cable TV) is displayed.
Press to select PROGRAM CH.
Press to display the PROGRAM
CHANNELS screen.
3
4
Press to select MODE.
Press to select TV or CABLE.
5
Press to select AUTO PROGRAM.
Press to display the AUTO PROGRAM
screen.
6
Press to select YES.
Press to start AUTO PROGRAM.
Channels will automatically advance until all channels have been
scanned. Channel numbers with video signal received will be stored
in the Channel Memory.
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
AUTO PROGRAM
Activate
"AUTO PROGRAM?"
YES NO
AUTO PROGRAM
In "AUTO PROGRAM"
CHANNEL
59
PROGRAM CHANNELS
MODE
AUTO PROGRAM
MANUAL PROGRAM
TV
CABLE
Menu Operations
Automatic channel programming
Press the TV/VIDEO button to display the TV channel.
1
Press the MENU button to display the MENU screen and select SET UP.
2
13
PROGRAM CHANNELS
MODE
AUTO PROGRAM
MANUAL PROGRAM
TV
CABLE
MANUAL PROGRAM
ENTER CHANNEL
121
Press to select MANUAL PROGRAM.
Press to display the MANUAL
PROGRAM screen.
5
Press to select the channel.
• You can also use the numbered
buttons.
6
7
Press to add the channel to the Channel
Memory (the channel number turns blue).
Press to delete the channel from the Channel
Memory (the channel number turns yellow).
• Repeat steps 6 and 7 for other channels.
Manual channel programming
Add or delete a channel manually.
Menu Operations
MANUAL PROGRAM
ENTER CHANNEL
121
14
V-Chip technology allows parents to use the TV rating codes to block programs that they feel are inappropriate
for their children to watch.
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
ENTER CODE FIRST
OFF ON
Input 4-digit code.
• To clear the numbers while entering the code, press Up
or Down
.
• You will need the code to enter the LOCK menu.
• After entering your password for the first time, ENTER
CODE FIRST will change to CHANGE CODE.
Note:
Use a code that is easy to remember and record it in a safe
place.
Press to select LOCK.
Press to display the
LOCK screen.
4
Press to select BLOCK PROGRAMS.
Press to select U.S. MOVIES, U.S. TV
PROGRAMS, CANADIAN ENGLISH
or CANADIAN FRENCH.
5
Press to select STATUS.
Press to select ON or OFF.
OFF : Can view all programs.
ON : Cannot view programs locked in
CHANGE SETTING.
Press to select CHANGE SETTING.
Press to enter the next menu.
6
LOCK
Menu Operations
3
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
CHANGE CODE
OFF ON
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
CHANGE CODE
OFF ON
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
CHANGE CODE
OFF ON
2
1
Press the MENU button to display the MENU screen and select SET UP.
15
Press to select VIEW NR PROGRAMS?.
Press to select NO or YES.
NO :
Cannot view programs with NR signals.
YES : Can view programs with NR signals.
U.S. TV PROGRAMS
VIEW NR PROGRAMS?
U. S. TV PROGRAMS
TV
–
G
TV
–
PG
TV
–
1 4
TV
–
MA
V
V
V
D
D
L
L
L
S
S
S
TV
–
Y
TV
–
Y7
FV
SETTING BASIC
NO YES
7
9
Press to select SETTING.
Press to select BASIC or DETAILED.
BASIC : You can select the titles.
DETAILED : You can select the titles and
options.
8
Press to select the rating.
Press to lock or unlock the rating.
Lock : Red
Unlock: Green
• When a title field is selected, all ratings below this rating are selected.
• When options within an option field are selected, ratings below this
rating within the same field are selected.
Menu Operations
Title Option
10
This TV features the “V-Chip technology” which allows you to use U.S. TV PROGRAMS Guide ratings to
block various types of TV programs.
NR
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
FV
V
S
L
D
Not Rated. See Customer Caution on page 17.
All children. The themes and elements in this program are specifically designed for a
very young audience, including children from ages 2-6.
Directed to older children. Themes and elements in this program may include mild physical
or comedic violence, or may frighten children under the age of 7.
General audience. It contains little or no violence, no strong language, and little or no
sexual dialogue or situations.
Parental guidance suggested. The program may contain infrequent coarse language,
limited violence, some suggestive sexual dialogue and situations.
Parents strongly cautioned. This program may contain sophisticated themes, sexual
content, strong language and more intense violence.
Mature audiences only. This program may contain mature themes, profane language,
graphic violence, and explicit sexual content.
FANTASY/CARTOON VIOLENCE
VIOLENCE
SEX
OFFENSIVE LANGUAGE
DIALOGUE WITH SEXUAL CONTENT
16
The V-CHIP used in this TV allows you to block various types of movies and television programs based on
the two rating systems used in Canada. It also lets you block or unblock Canadian French programs according
to various ratings categories.
Menu Operations
U.S. MOVIES
7
8
Press to select the rating.
U. S. MOVIES
VIEW NR PROGRAMS?
NO YES
CANADIAN ENGLISH / CANADIAN FRENCH
7
Press to select VIEW E
PROGRAMS?.
Press to select NO or
YES.
NO : Cannot view
programs with
E signals.
YES : Can view
programs with
E signals.
CANADIAN FRENCH
VIEW E PROGRAMS?
NO YES
G
8 ANS
+
13ANS
+
16ANS
+
18ANS
+
CANADIAN ENGLISH
VIEW E PROGRAMS?
NO YES
C
C8
+
G
PG
14
+
18
+
Press to select VIEW NR PROGRAMS?.
Press to select NO or YES.
NO :
Cannot view programs with NR signals.
YES :
Can view programs with NR signals.
8
Press to select the rating.
Press to lock or unlock the rating.
Lock : Red
Unlock: Green
Press to lock or unlock the rating.
Lock : Red
Unlock: Green
This TV features the “V-Chip technology” which allows you to use Motion Picture Ratings when viewing
movies or video tapes. This innovation allows parents to block various types of movies and video tapes at
their discretion.
NR
G
PG
PG-13
R
NC-17
X
CONTAINS NO RATING (NOT RATED) AND NA (NOT APPLICABLE)
PROGRAMS. Movie has not been rated or rating does not apply.
GENERAL AUDIENCES. All ages admitted.
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children
under 13.
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NO ONE 17 AND UNDER ADMITTED.
ADULTS ONLY.
17
Menu Operations
The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable
and none) per FCC Rules Section15.120(e)(2). If the option of blocking “NR” programs is chosen
“unexpected and possibly confusing results may occur, and you may not receive emergency bulletins or
any of the following types of programming:”
Customer Caution
• Emergency Bulletins (Such as EAS messages, weather warnings and others)
•
Locally originated programming • News • Political • Public Service Announcements • Religious • Sports
• Weather
CANADIAN ENGLISH RATINGS CHART
CANADIAN FRENCH RATINGS CHART
E
C
C8+
G
PG
14+
18+
Exempt - Exempt programming includes: news, sports, documentaries and other
information programming, talk shows, music videos, and variety programming.
Programming intended for children under age 8. No offensive language, nudity or sexual
content.
Programming generally considered acceptable for children 8 years and over. No profanity,
nudity or sexual content.
General programming, suitable for all audiences.
Parental Guidance suggested. Some material may not be suitable for children.
Programming contains themes or content which may not be suitable for viewers under
the age of 14. Parents are strongly cautioned to exercise discretion in permitting viewing
by pre-teens and early teens.
18+ years old. Programming restricted to adults. Contains constant violence or scenes
of extreme violence.
E
G
8 ANS+
13ANS+
16ANS+
18ANS+
Exempt - Exempt programming.
General - Programming intended for audience of all ages. Contains no violence, or the
violence content is minimal or is depicted appropriately.
8+ General - Not recommended for young children. Programming intended for a broad
audience but contains light or occasional violence. Adult supervision recommended.
Programming may not be suitable for children under the age of 13 - Contains either a
few violent scenes or one or more sufficiently violent scenes to affect them. Adult
supervision strongly suggested.
Programming may not be suitable for children under the age of 16 - Contains frequent
scenes of violence or intense violence.
Programming restricted to adults. Contains constant violence or scenes of extreme
violence.
18
Menu Operations
This unit has a built in decoder that provides a visual depiction of the audio portion of a television program
in the form of written words across the screen (white or colored letters on a black background). It allows you
to read the dialogue of a television program or other information.
Press to select CLOSED CAPTION.
Press to display the CLOSED
CAPTION screen.
2
Displays the On-Screen Closed Caption when the MUTE button is pressed. To delete the closed caption,
press the MUTE button again.
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
Press to select OFF, C1 or C2.
Displays the On-Screen Closed Caption.
CLOSED CAPTION
MODE
OFF
ON MUTE
NO
Press to select
CC
MODE.
Press to select
CC
ON MUTE.
CLOSED CAPTION
MODE
OFF
ON MUTE
NO
Press to select NO (OFF), C1 or C2.
CLOSED CAPTION
Notes:
• To activate this feature, set CC MODE to OFF .
• The program must have Closed Caption.
CC ON MUTE
CC MODE
• OFF (NO): Recommended mode when Closed Caption is not being used.
• C1 : For video related information that can be displayed (up to 4 lines of script strategically placed on
the television screen so that it does not obstruct relevant parts of the picture).
• C2 : Another mode used for video related information.
1
Press the MENU button to display the MENU screen and select SET UP.
3 - 1
3 - 2
19
Menu Operations
You can change the label of the video inputs to match with the connected device (VCR, DVD player etc.).
Press to select INPUT LABEL.
Press to display the INPUT LABEL screen.
2
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
INPUT LABEL
VIDEO1
VIDEO2
COMPONENT
VIDEO1
VIDEO2
COMPONENT
3
Press to select the video input
(VIDEO1, VIDEO2 or COMPONENT).
Press to select the INPUT LABEL.
(VIDEO1/VIDEO2/COMPONENT,
VCR, LD, GAME, DVD, DTV, SKIP
∗
or [BLANK])
∗ Select to skip unused video input
when pressing TV/VIDEO button.
INPUT LABEL
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
Press to select OTHER ADJUST.
Press to display the OTHER ADJUST
screen.
2
Press to select the item.
3
Press to select the setting.
VIDEO NR
Reduce video noise in the picture. Not available for Photo Viewer mode.
3D Y/C FILTER
Minimizes noise and cross color in the picture. Not available for
COMPONENT VIDEO INPUT, S-VIDEO INPUT and Photo Viewer mode.
COLOR MATRIX
Displays input signals (480p signals) in a natural color. Automatically adjusts color parameters for HD
(high definition) and SD (standard definition). Not available for Photo Viewer mode.
POWER SAVE
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark room.
OFF ON
OTHER ADJUST
VIDEO NR
OFF ON
3D Y/C FILTER
COLOR MATRIX
SD HD
POWER SAVE
STANDARD
OFF ON
SD HD
STANDARD SAVING
OTHER ADJUST
OFF ON
1
Press the MENU button to display the MENU screen and select SET UP.
1
Press the MENU button to display the MENU screen and select SET UP.
20
Sub-menu
BACK LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI PICTURE
PICTURE ADJUST
2
3
Press to select PICTURE ADJUST.
Press to display the PICTURE ADJUST
screen.
Press to select the sub-menu.
Adjust the setting watching the picture
behind the menu.
Press to activate the setting if necessary.
PIC MODE
The picture mode is stored for TV, VIDEO1/VIDEO2 and COMPONENT individually.
BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS, AI PICTURE
You can change the sub-menu settings (BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT,
SHARPNESS and AI PICTURE) for each PIC MODE (STANDARD, CINEMA, and VIVID) according to your
personal preference.
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
OFF ON
COOLCOOL
PICTURE ADJUST
NORMAL
PIC MODE
BACK LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI PICTURE
+ 30
0
0
0
0
0
OFF ON
STANDARD
Function
Luminance of the back light is adjusted.
Selects proper brightness and density for the room.
Adjusts for easier viewing of dark pictures such as night scenes.
Adjusts the level of color.
Adjusts for flesh tone color.
Adjusts the degree of sharpness.
Controls dark areas without affecting the black level or brightness in the overall picture.
Function
Displays a clear image with high contrast.
Displays a standard image.
Ideal for watching movies in a dark room.
MODE
VIVID
STANDARD
CINEMA
Menu Operations
NORMAL/NORMALIZE
Select “NORMALIZE” and press “OK” button to return each PIC MODE to the factory default setting.
Notes:
• “NORMAL” means the PIC MODE is in the factory default setting. “NORMAL” changes to “NORMALIZE”
when you change the setting of BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS or
AI PICTURE.
• You can normalize each PIC MODE separately.
1
Press the MENU button to display the MENU screen and select ADJUST.
21
AUDIO ADJUST
2
3
Press to select AUDIO ADJUST.
Press to display the AUDIO ADJUST
screen.
Press to select the sub-menu.
Select the setting listening to the
sound.
Press to activate the setting if
necessary.
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
OFF ON
OFF
ON
AUDIO ADJUST
NORMAL
MODE
BASS
TREBLE
BALANCE
SURROUND
EQUALIZER
STEREO SAP MONO
AUTO
+ 5
+ 3
0
MODE
MODE
STEREO
SAP
MONO
Function
Two channel audio reception.
Second Audio Programming
(typically used for bilingual audio).
Select when stereo signal is weak.
Note:
• Red display : With signal
White display : No signal
White display (All modes) : MONO
• To change the mode using SAP button
(see page 10).
STEREO/SAP/MONO
BASS, TREBLE, BALANCE, SURROUND, EQUALIZER
You can change the level of each sub-menu (BASS, TREBLE, BALANCE, SURROUND and EQUALIZER)
for each MODE (AUTO, STANDARD, DYNAMIC and MUSIC) according to your personal preference.
Menu Operations
Sub-menu
BASS
TREBLE
BALANCE
SURROUND
EQUALIZER
Function
Adjusts low frequencies.
Adjusts high frequencies.
Adjusts left and right volume.
To enjoy a concert hall effect, select ON when stereo is playing.
Makes voice sound clear. Normally set to ON.
NORMAL/NORMALIZE
Select “NORMALIZE” and press “OK” button to return each MODE to the factory default setting.
Notes:
• “NORMAL” means the MODE is in the factory default setting. “NORMAL” changes to “NORMALIZE” when
you change the setting of BASS, TREBLE, BALANCE, SURROUND or EQUALIZER.
• You can normalize each MODE separately.
MODE
DYNAMIC
MUSIC
AUTO
STANDARD
Function
Gives contrast to sound.
For programs consisting mainly of music. Enhances high sounds (around 4 kHz).
Automatically adjusts for a wide Dynamic Range.
Emits the original sound.
1
Press the MENU button to display the MENU screen and select ADJUST.
22
ASPECT Controls
This feature allows you to enjoy viewing the picture at its maximum size, including wide screen cinema
format picture.
Each time you press the button:
Notes:
• The aspect setting is stored separately for VIDEO1, VIDEO2 and COMPONENT.
• In TV mode and Photo Viewer mode, the aspect is fixed at 4:3.
(For Video input only)
Explanation
4:3 mode will display a 4:3 picture at its standard
4:3 size without any stretching.
16:9 mode will display 16:9 aspect ratio picture.
Bars can be seen at the top and bottom of the
image (not available in TV mode).
Mode
4 : 3
16 : 9
Picture
4 : 3
16 : 9
16 : 9
4 : 3
23
Photo Viewer
Photo Viewer lets you display JPEG images recorded by digital still camera on SD card or other types of
memory card when it is inserted in the proper card slot.
Compatible card type and card size
Folders and Files
Example folder structure
JPEG images in all the folders are displayed
sequentially.
Notes:
• Folder and file names may vary according to
the digital still camera.
• Use the characters “a-z”, “A-Z”, “0-9” and “_”
to name a directory or a file. Do not use two-
byte characters or other special codes.
∗ miniSD Card requires miniSD adapter.
•
Photo Viewer is not compatible with card type hard
disk (Micro Drive, Mobile type hard disk, etc).
• Memory cards are not supplied with this television.
• When both SD card and PCMCIA card are inserted
in the slot, SD card has the priority.
Card Data Protection
• Do not remove the card while Photo Viewer is
accessing the information (when the card icon is
flashing). Such action may damage the memory
card or the unit itself.
• Before inserting or removing the PCMCIA card,
make sure that the TV is turned Off. Otherwise, it
may damage the unit.
• Do not touch the terminals on the back of the SD
card / PCMCIA card.
• Always insert a card in the correct direction. Failure
to do so may result in damage to the card and
this unit.
• Do not subject the card to excessive pressure or
strong impacts.
• Electrical interference, electrostatic discharges
and malfunctions of the unit or card may all result
in data loss or damage to the card.
• Stored data should be periodically backed up as
a protection against data corruption, data loss or
device malfunction. Please note that Panasonic
shall not accept any liability for damage or loss of
stored data.
• WARNING: As with any small object, an SD
card can be swallowed by young children. Do
not allow children to handle
SD card. Please
remove SD card immediately after use.
PCMCIA card slot
•
SD Card (512MB)
•
miniSD Card
∗
(128MB)
•
Multi Media Card (128MB)
•
Compact Flash (1GB)
•
Smart Media (128MB)
•
Memory Stick (128MB)
•
xD Picture Card(128MB)
•
Flash ATA (128 MB)
•
Memory Stick Pro (1GB)
The cards require standard PCMCIA card
adapter. (Some PC card adapter will not be
compatible).
SD card slot
•
SD Card (512MB)
•
Multi Media Card (128MB)
•
miniSD Card
∗
(128MB)
• Photo Viewer can only show still images recorded
by a digital still camera with DCF
∗
and EXIF
standard JPEG file.
∗ DCF (Design rule for Camera File system)
Unified standard established by Japan Electronics
and Information Technology Industries Association
(JEITA).
• Memory cards must be formatted with FAT12 or
FAT16 in order to be viewed on TV. If the card is
not formatted, it may cause incompatibility with
certain memory card adapters. If this happens,
reformat the card using your digital still camera.
Reformatting the card will erase the images
stored in it. Refer to your camera manual for
more information.
• Maximum number of folders that can be displayed:
100.
•
Maximum number of files that can be displayed: 3000.
•
Picture resolution: Compatible in the range 64 x
64 - 8192 x 8192 (sub-sampling 4:2:2 or 4:2:0)
• If the image is imported from a PC, it must follow
the EXIF (Exchangeable Image File Format) 2.0,
2.1, 2.2 in addition to the DCF format.
• The JPEG modified using a PC will not be
displayed on TV.
• The Photo Viewer cannot display Motion JPEG
and still image not DCF formatted (i.e. TIFF, BMP).
• If the file is partially corrupted, it may be shown in
lower resolution.
• The displayed image size depends on the recorded
size.
ROOT
DCIM
P1000001.jpg
P1000002.jpg
P1000003.jpg
P1000004.jpg
P1010001.jpg
P1010002.jpg
P1010003.jpg
P1010004.jpg
100_PANA
101_PANA
Created automatically
Folder names consist of
a 3-digit folder number
which is followed by five
arbitrary characters.
File names consist of
four arbitrary characters
followed by a 4-digit file
number.
24
EJECT
EJECT
PhotoViewer
SELECT
SELECT
MENU
MENU
SD to setup
SD to setup
0 0 0 1 / 0 0 1 9
Filename :100-0001
Date :03/05/2004
Pixel :1600X1200
OK
OK
PhotoViewer
MENU
MENU
RETURN
RETURN
SD to setup
SD to setup
0 0 0 1 / 0 0 1 91 0 0 -- 0 0 0 1
INDEX
INDEX
Inserting and removing a card
SD card slot
Insert the card until it clicks in.
PCMCIA card slot
Turn the TV off before inserting or removing a PCMCIA card.
Label side upward
Holding both edges, securely
insert it to the depth.
Push the center of the card to
remove the card.
Remove the card.
• Align the direction of
mark.
• Label side facing toward the TV’s front
panel.
Terminal face to the depth
If the eject button does not pop out:
Push in PCMCIA card again, and then
push again the eject button.
Note:
If PCMCIA card adapter is used, remove
it together with the memory card.
Notes:
• It may take long time to display the thumbnail if there are lots of files or the file size is large.
• The video disappears from the screen while the Photo Viewer accesses the information from the card.
After accessing the images in the card, a thumbnail screen is displayed.
The thumbnail screen is the initial entry screen from the main menu.
• When both SD card and PCMCIA card are inserted, the TV plays SD card. To play a PCMCIA card, select
“PC” in “Card” (see page 25).
Thumbnail Mode
Insert the card into the appropriate slot (see above).
OR
1
2
Press to display the thumbnail screen.
Picture No. / Total No. of pictures
File name, the date and the pixel (resolution)
of the picture
Single picture view mode
3
Press to select the next or the previous picture.
• Press CH
,CH
to rotate the picture ninety degrees.
• Press OK to return to the thumbnail screen.
Insert the card.
Select the thumbnail image.
Press to display the image in
the single picture view mode.
Photo Viewer
1.
Push, the
EJECT button
pops out.
2.
Push it again.
•
To exit Photo Viewer: This returns TV to normal viewing.
25
Setting
5Sec, 10Sec, 15Sec, 30Sec, 60Sec, 90Sec or 10Min
Order or Random
OFF or ON
Photo Viewer Setup Menu
This menu allows you to customize features in the Photo Viewer Setup Menu.
While in the thumbnail mode or the single picture view mode (see page 24)
1
2
Press to select the sub-menu.
Press to adjust or activate the sub-
menu.
Press to display the Setup Menu
screen.
Photo Viewer
Setup Menu
Return
Interval
5Sec
Sequence Order
Slide Show Start
Repeat OFF
Rotate
Zoom
Left
To Fit
Card SD
SELECT
CHANGE
OK
MENU
MENU
RETURN
RETURN
Slide Show
Select the sub-menu settings. Select “Start” and press OK to start the slide show.
Note:
Press OK again to stop the slide show.
Rotate
Select “Left” or “Right” and press OK to rotate the image (see also page 24).
Notes:
• Press CH
,CH
, VOL
, VOL
to move the image in the picture frame.
• Press OK again to view the picture in normal magnification.
Zoom
(While in the single picture view mode only)
Select the magnification of the single picture display and press OK.
Card
Select either “SD” or “PC” when both cards are inserted in the slots.
Press OK to determine the selection.
Error messages
“Card is not inserted correctly
”
“This type of image is not supported.”
“This type of format is not supported.”
“ ”
“Photo Viewer cannot support over 3000 JPEG files.”
“Photo Viewer cannot support over 8192 x 8192 pixels.”
“This type of card is not supported.”
Insert a card.
The JPEG file is corrupted and cannot be decoded.
The card is not formatted with FAT 12 or FAT 16 or if
it is not DCF standard.
Thumbnail and main picture cannot be shown.
Over 3000 image files.
Resolution over.
Incompatible card is inserted.
Sub-menu
Interval
Sequence
Repeat
26
Se necesitan dos pilas AA.
1. Abra la cubierta de las pilas.
2. Instale las pilas y vuelva a poner la tapa.
Tenga en cuenta las polaridades (+ y -)
al instalar las pilas.
Instalación de las pilas del mando a distancia
Manual de instrucciones [ Resumen ]
Estimado cliente de Panasonic
Bienvenido a la familia de clientes de Panasonic.
Esperamos sinceramente que disfrute durante muchos años de su nuevo Esperamos
sinceramente que disfrute durante muchos años de su nuevo televisor LCD.
Para obtener el máximo beneficio de su aparato, lea estas instrucciones antes
de hacer cualquier ajuste, y guárdelas para poder utilizarlas como referencia
en el futuro.
Guarde también el recibo de su compra, y anote el número del modelo y el
número de serie de su aparato en el espacio provisto en la cubierta posterior de
estas instrucciones.
10 5
20
20
Precauciones relacionadas con la utilización de las pilas
La instalación incorrecta de las pilas puede causar fugas en las mismas que podrían estropear el transmisor
de mando a distancia.
Tome las precauciones siguientes:
1. Utilice siempre pilas nuevas cuando reemplace las viejas.
2. No intente cargar, cortocircuitar, desarmar, calentar o quemar las pilas usadas.
3. Las pilas deberán cambiarse cuando el mando a distancia funcione esporádicamente o no pueda
controlar esta unidad.
Frente
Frente
El ángulo del soporte se puede ajustar entre 5° hacia delante y 10° hacia atrás, y se puede girar 20° hacia
la derecha/izquierda.
Ajuste el soporte con el ángulo deseado
27
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
ANT
ANT
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
ANT
ANT
Receptor de TV por cable
Receptor de TV por cable y Videograbadora
Receptor de TV por cable
Cable entrante de 75 ohmios
procedente compañía de
televisión por cable
OUTPUT INPUT
Cable entrante de 75 ohmios
procedente compañía de
televisión por cable
La parte posterior del televisor
La parte posterior del televisor
• Para recibir los canales de televisión por cable (01 - 125) conecte el cable suministrado por su compañía
de televisión por cable. El modo de antena debe ajustarse a CABLE (consulte la página 31, MODO).
• Ciertos sistemas de televisión por cable neutralizan algunos canales para reducir interferencias o tienen
canales especiales (codificados). Para recibir correctamente estos canales se necesita un sintonizador
de conversión de televisión por cable. Póngase en contacto con su compañía de televisión por cable para
conocer los requerimientos de compatibilidad.
• Ponga el canal del televisor en CH3 o CH4 utilice esta conexión.
Conexión del receptor de TV por cable
Conexión de antena
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
ANT
ANT
Para recibir correctamente los canales de VHF/UHF se requiere una antena externa. Para obtener la mejor
recepción se recomienda utilizar una antena para exteriores. El modo de antena debe ajustarse a TV
(consulte la página 31, MODO).
Antena de VHF Antena de UHF
Cable coaxial
de 75 ohmios
Mezclador
Terminal de antena
Conector de
antena tipo F
Nota:
Con este aparato no se suministran cables ni conectores.
La parte posterior del televisor
Conexión
Receptor de TV por cableOUTPUT INPUT
Videograbadora
ANT OUTPUT
ANT INPUT
28
Canal 6
ESTEREO
SPA
MONO
4 : 3
POWER
R-STANDBY / G-POWER ON
TV/VIDEO VOLUME CHANNEL
POWER
Conexión/desconexión de la alimentación
Preparación
Conecte el enchufe al tomacorriente.
Púlselo para conectar/desconectar la
alimentación principal del televisor.
• Indicador de la alimentación
Alimentación principal conectada : Verde
Alimentación principal desconectada : Apagado
Ej.:
Sensor de
mando a
distancia
Interruptor POWER principal
Indicador de la alimentación
Púlselo para encender/apagar el televisor.
• Indicador de la alimentación
Encendido : Verde
Apagado (En espera) : Rojo
• Esto no funciona cuando la alimentación
principal está desconectada (apagado)
(consulte arriba).
Nota:
Seleccione el idioma de menú en Idioma de la
pantalla Configu.(consulte la página 30) antes
de utilizar el televisor.
Nota:
El televisor consumirá algo de corriente siempre
que el enchufe del cable de alimentación esté
introducido en la toma de corriente.
Cable de
alimentación
CA 120 V, 60 Hz
En el aparato principal
En el mando a distancia
La pantalla de abajo se visualiza durante un rato
cuando se enciende el televisor.
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
ANT
Conexión de auriculares
(No suministrado)
Clavija M3
Conexión
ANT
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
29
POWER
TV/VIDEO VOLUME CHANNEL
EJECT
Controles básicos
Sensor de mando a distancia
Dentro de 20 pies (6 metros) a partir del
panel delantero del televisor.
Interruptor POWER principal
Púlselo para conectar/desconectar la
alimentación principal del televisor
(consulte la página 28).
<Controles del lado superior>
Canal superior/
inferior
Subida/bajada
del volumen
Botón TV/VIDEO
Ranura de SD CARD
Ranura de
PC CARD
Botón PC
CARD EJECT
Botón SLEEP
Ponga el tiempo tras el cual el
televisor se pondrá en el modo de
espera.
•
Cuando queden 3 minutos parpadeará
“ 3” (“2” para 2 minutos y “1” para 1
minuto).
•
El temporizador de cancelado se
cancelará cuando se desconecte la
alimentación.
ESTEREO SPA MONO
30 60
0
90
4 : 3 16 : 9
Video1 Video2
TV
Componente
Botón de la alimentación
Púlselo para encender o apagar
el televisor (consulte la página 28).
Nota:
Esto no funciona cuando la
alimentación principal está
desconectada (apagado).
Botones numerados
∗
Botón TV/VIDEO
Púlselo para cambiar el modo de entrada.
Botón R-TUNE
∗
Púlselo para cambiar a un canal visto
previamente o para cambiar entre el
modo del televisor y otro modo de
entrada.
No resulta efectivo bajo las condiciones siguientes:
1.
Justo después de encender el televisor.
2. Después de cambiar TV / CATV
(MODO en Prog. Canales).
3. Justo después de la ejecución de ACP
(programación automática de canales).
4. Cuando se selecciona el mismo canal
que el canal actual.
Botón MUTE
∗
Púlselo para silenciar el sonido.
Púlselo de nuevo para cancelar el
silenciamiento.
El silenciamiento se cancela cuando
se desconecta la alimentación o se
cambia en nivel del sonido.
Botón ASPECT
∗
Botón MENU
(consulte la página 30)
Botón RETURN
Púlselo para volver a la pantalla anterior.
Botón RECALL
∗
Púlselo para visualizar el número
del canal, el temporizador de
cancelado y otras opciones.
Botón SAP
∗
Púlselo para seleccionar el modo de audio. También
puede cambiar el modo en la pantalla MENU .
Nota:
Para las señales de entrada, cambie el modo
de audio en el equipo conectado.
Aumenta el volumen
Mueve el cursor
hacia la derecha
durante el modo
del menú.
Canal inferior
Mueve el cursor hacia abajo durante el
modo del menú.
Canal superior
Mueve el cursor hacia arriba durante el
modo del menú.
Reduce el volumen
Mueve el cursor
hacia la izquierda
durante el modo
del menú.
Botón SD
Púlselo para acceder Photo Viewer
(consulte la página 33)
∗ No funciona en el modo Photo Viewer.
30
Operaciones con menús
1
2
3
Púlselo para visualizar la pantalla MENU.
Púlselo para seleccionar la pantalla MENU
(Ajuste o Configu.).
Púlselo para seleccionar la función de menú
secundario.
Púlselo para visualizar la pantalla de menú
secundario.
•
Para volver a la pantalla anterior :
•
Para salir de la pantalla MENU : Con esto se retorna a la visión normal.
Notas:
• Seleccione el idioma de menú en Idioma de la pantalla Configu. antes de
utilizar el televisor.
MENU
Ajuste Configu.
Idioma
Prog. Canales
Bloqueo
Subtítulos
Ponga Títulos
Otro Ajuste
MENU
Ajuste
Imagen
Sonido
Configu.
Ajuste Imagen
Ajuste Sonido
o
Idioma
Idioma
PROGRAMA MANUAL
Entre Canal
121
VUELVE
ANULAR
SEL CANAL
• Idioma, Prog. Canales, Bloqueo, Subtíitulos y
Ajuste Sonido no se activan en el modo Photo
Viewer.
• Cuando se visualiza un menú en el televisor
aparece un cuadro de ayuda en la pantalla. Este
cuadro de ayuda indica qué teclas del mando a
distancia se utilizan para navegar por el menú
mostrado.
31
Sintonización de canales
Explora y guarda automáticamente todos los canales de TV.
Notas:
• Cuando se pulse cualquier botón durante PROGRAMA AUTO, el televisor volverá a mostrar la imagen
normal. (Los canales encontrados hasta ese punto se añaden.)
• Después de terminar PROGRAMA AUTO se visualizará el número del canal más bajo añadido.
• Cuando no haya canales que puedan recibirse, se visualizará el canal 69 (para TV) o el canal 125 (para
TV por cable).
Pulse para seleccionar Prog. Canales.
Pulse para visualizar la pantalla
Prog. Canales.
3
4
Pulse para seleccionar MODO.
Pulse para seleccionar TV o CABLE.
5
Pulse para seleccionar PROGRAMA AUTO.
Púlselo para visualizar la pantalla
PROGRAMA AUTO.
6
Púlselo para seleccionar Si.
Púlselo para iniciar PROGRAMA AUTO.
Los canales avanzarán automáticamente hasta que todos ellos hayan
sido explorados. Los números de los canales con señal de vídeo
recibida se guardarán en la memoria de canales.
MENU
Ajuste Configu.
Idioma
Prog. Canales
Bloqueo
Subtítulos
Ponga Títulos
Otro Ajuste
PROGRAMA AUTO
Activar
"PROGRAMA AUTO?"
Si No
PROGRAMA AUTO
En Programa Auto
Canal
59
Prog. Canales
MODO
PROGRAMA AUTO
PROGRAMA MANUAL
TV
CABLE
Operaciones con menús
Programación automática de canales
Pulse el botón TV/VIDEO para visualizar el canal de TV.
1
2
Pulse el botón MENU para visualizar la pantalla MENU y seleccione Configu.
32
Pulse para seleccionar PROGRAMA
MANUAL.
Pulse para visualizar la pantalla
PROGRAMA MANUAL.
5
Pulse para seleccionar canal.
• También puede utilizar los botones numerados.
6
7
Púlselo para añadir el canal a la memoria de canales
(el número del canal se pone de color azul).
Púlselo para borrar el canal de la memoria de
canales (el número del canal se pone amarillo).
• Repita los pasos 6 y 7 para otros canales.
Añada o borre un canal manualmente.
Prog. Canales
MODO
PROGRAMA AUTO
PROGRAMA MANUAL
TV
CABLE
PROGRAMA MANUAL
Entre Canal
121
Operaciones con menús
Programación manual de canales
PROGRAMA MANUAL
Entre Canal
121
33
Photo Viewer
Photo Viewer le permite mostrar imágenes JPEG grabadas mediante una cámara digital en una tarjeta SD
o en otro tipo de tarjeta de memoria cuando ésta se introduce en la ranura correcta.
Notas:
• Si hay muchos archivos o el tamaño del archivo es grande se puede tardar más tiempo en mostrar la
imagen miniatura.
• La imagen desaparece de la pantalla mientras Photo Viewer accede a la información de la tarjeta. Después
de acceder a las imágenes de la tarjeta se muestra una pantalla de imagen miniatura.
La pantalla de imagen miniatura es la pantalla de entrada inicial desde el menú principal.
• Cuando se introduzcan las tarjetas SD y PCMCIA, el televisor reproducirá la tarjeta SD. Para reproducir
una tarjeta PCMCIA, seleccione “PC” en “Tarjeta” del Ajustes de Menú.
Mode de imagen miniatura
Introduzca la tarjeta en la ranura apropiada (vea las página 24).
O
1
2
Número de imagen/Número total de imágenes
Nombre de archivo, la fecha y los píxeles
(resolución) de la iamgen
Modo de visión de una sola imagen
3
Presione para seleccionar la imagen siguiente o la anterior.
• Presione CH
, CH
, para girar la imagen noventa grados.
• Presione OK para volver a la pantalla de imagen miniatura.
Seleccione la imagen miniatura.
Presione para visualizar la imagen en
el modo de visión de una sola imagen.
Presione para mostrar una pantalla de imagen miniatura.
Ajustes de Menú de Photo Viewer
En el modo de imagen miniatura o en el modo de visión de una sola
imagen
Presione para mostrar la pantalla Ajustes de Menú.
SELECCIONAR
SELECCIONAR
MENU
MENU
SD a ajustes
SD a ajustes
0 0 0 1 / 0 0 1 9
Archivo :100-0001
Fecha :03/05/2004
Pixel :1600X1200
OK
OK
PhotoViewer
PhotoViewer
MENU
MENU
REGRESAR
REGRESAR
SD a ajustes
SD a ajustes
0 0 0 1 / 0 0 1 91 0 0 -- 0 0 0 1
íNDICE
NDICE
Ajustes de Menú
Regresar
Intervalo
5Seg
Secuencia Orden
Diapositivas Comenzar
Repetir Apagado
Rotar
Izquierda
Zoom a Justo
Tarjeta SD
SELECCI
-ONAR
CAMBIAR
OK
MENU
MENU
REGRESAR
•
Para salir de Photo Viewer : Con esto se retorna a la visión normal.
34
Troubleshooting
If there is a problem with your TV please refer to the table below to determine the symptoms, then carry out the
suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the
model number and serial number (both found on the rear of the TV).
Symptoms
Checks
Antenna location, direction or connection.
Picture Sound
Aerial location, direction or connection.
Electrical appliances
Cars / Motorcycles
Fluorescent lights
Volume level
Sound mute switched on.
Color controls set at minimum levels.
Weak signal.
Retune Channel (s).
Sound reception may have deteriorated.
Switch STEREO mode to Off until reception improves.
Noisy Sound
Normal Sound
No Sound
No Sound
Normal Sound
Noisy Sound
Weak or No Sound
Weak or No Sound
Interference
Multiple Image
Normal Picture
No Picture
No Colour
Snowy Picture
Normal Picture
Poor or Distorted Picture
Cannot operate with the remote control.
The battery is exhausted.
The battery’s polarity is wrong.
The remote control sensor is exposed to strong light of a
fluorescent lamp, etc.
The main unit is hot.
The main unit radiates heat and some of the parts may become
hot. This is not a problem for performance or quality.
Set up at a location with good ventilation.
Do not cover the ventilation holes of the TV with a tablecloth
etc., and do not place on top of other equipment.
There may be red spots, blue spots,
green spots and black spots on the
screen.
This is a characteristic of liquid crystal panels and is not a
problem. The liquid crystal panel is built with very high
precision technology giving you fine picture details.
Occasionally, a few non-active pixels may appear on the
screen as a fixed point of red, blue, green, or black.
Please note this does not affect the performance of your LCD.
TV set to Video Input mode.
Not plugged into AC outlet.
Not switched on.
Picture / Sound controls set at minimum levels.
Check if in Standby mode.
Cannot read the content of the card.
PC card cannot be ejected.
Poor picture quality.
Picture takes a long time to display.
Not compatible format. Must be formatted with FAT 12 or FAT 16.
The extension is not “JPG”.
The folders not under DCF standard.
Push the card all the way in, and eject.
If the main image cannot be read (the file is partially corrupted), the Photo
viewer will read the thumbnail. Please confirm the format of the image.
There are lots of images or the file size is large.
Photo Viewer
35
AC 120 V, 60 Hz
Average use : 58 W
Stand-by condition : 0.10 W
Power off : 0.08 W
19.6-inch (499 mm) Diagonal 4:3 aspect ratio LCD panel
VGA (640 × 480 pixels)
15.79 ″ (401 mm) (W) × 11.77 ″ (299 mm) (H)
VHF-12 : UHF-56 : Cable-125
4 cm × 10 cm, 2 pcs, 16 Ω
6 W [3 W + 3 W] (10% THD)
M3 (3.5 mm) Jack × 1
3D Y/C Digital Comb Filter, CLOSED CAPTION, V-Chip, SD/PC Card slot
Temperature : 41 °F - 95 °F (5 °C – 35 °C)
Humidity : 5 % - 90 % RH (non-condensing)
VIDEO (RCA PIN Type × 1) × 2 1.0 Vp-p
(75
Ω
)
S-VIDEO (MINI DIN 4pin × 1) × 2
Y : 1 Vp-p (75 Ω), C : 0.286 Vp-p (75 Ω)
AUDIO L-R (RCA PIN Type × 2) × 2
0.5 Vrms
Y × 1
1.0 Vp-p (including synchronization)
P
B
/ P
R
× 1 ±
0.35
Vp-p
AUDIO L-R (RCA PIN Type × 2) × 1
0.5 Vrms
24 3/4 ″ × 19 51/64 ″ × 10 15/64 ″
(629 mm × 503 mm × 260 mm)
24 3/4 ″ × 16 29/64 ″ × 3 37/64 ″
(629 mm × 418 mm × 91 mm)
20.7 lb. (9.4 kg) Net
Note: Design and specifications are subject to change without notice. Weight and dimensions shown are
approximate.
Specifications
CAUTION :
If water or similar substances get inside the monitor via the liquid crystal panel surface, a malfunction may result.
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or
a weak detergent solution.
• Use eyeglass cleaner to remove stubborn dirt from the LCD.
• Never use alcohol, paint thinner or benzine to clean this unit.
•
Before using a chemically treated cloth, read the instructions that came with the cloth carefully.
Mild
detergent
Power Source
Power Consumption
LCD
Screen Size
Channel Capability
Sound
Speaker
Audio Output
Headphones
FEATURES
Operating Conditions
Connection Terminals
INPUT
COMPONENT VIDEO
INPUT
Dimensions ( W × H × D )
Including TV Stand
TV Set Only
Mass (Weight)
TC-20LB30
Maintenance
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus
New Jersey 07094
Panasonic Sales Company,
Division of Matsushita Electric
of Puerto Rico Inc. (“PSC”)
Ave. 65 de Infanteria, Km 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Printed in Japan
MBS0404S0
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
Customer’s Record
The model number and serial number of this product can be found on its rear panel. You should
note this serial number in the space provided below and retain this book, plus your purchase
receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss,
and for Warranty Service purposes.
Model Number Serial Number
2004 Matsushita Electric Industrial Co.,Ltd. All Rights Reserved.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
Panasonic TC20LB30 Instrucciones de operación
- Tipo
- Instrucciones de operación
En otros idiomas
Documentos relacionados
-
Panasonic TC32LX20 Instrucciones de operación
-
Panasonic TC 26LX20 Manual de usuario
-
-
-
-
-
Panasonic TC20LA5 - 20" LCD COLOR TV Instrucciones de operación
-
-
-