Yamaha SRT-1500 El manual del propietario

Marca: Yamaha

Modelo: SRT-1500

Tipo: El manual del propietario

TV Surround System

Owner’s Manual

Read the supplied booklet “Quick Reference Guide” before using the unit.

English

En 2

CONTENTS

Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Preparing remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

FEATURES 5

What you can do with this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Mastering useful apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Controls and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

PREPARATIONS 11

General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

a Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Raising the antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

b Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

c Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

d Other connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connecting an external subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Wired network connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

e Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

f Initial settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Displaying the menu screen on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Selecting the language for menu display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Setting a surround sound effect for the installation position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Operating the unit by TV’s remote control (HDMI control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

PLAYBACK 21

Basic operation for playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Enjoying sound based on your preference . . . . . . . . . . . . . . . . . . . . . . . . 22

Selecting a surround sound effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

2-channel playback (stereo playback mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Adjusting volume for each channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Viewing audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Clear playback of human voices (CLEAR VOICE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Wireless playback of audio via Bluetooth connection . . . . . . . . . . . . . . 25

Listening to music from a Bluetooth device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Listening to audio through Bluetooth speakers or headphones (transmitting) . . . . . . . . . . . . . . . . . . . . . . . 28

Terminating Bluetooth connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

NETWORKS 30

Connecting to a network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Wired network connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Wireless network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Connecting the unit to a wireless network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Connecting a mobile device to the unit directly (Wireless Direct) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Playing back music stored on media servers (PCs/NAS) . . . . . . . . . . . . 41

Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Playing music files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Playback of Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Registering favorite Internet radio stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Playing back music with AirPlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Playback of iTunes/iPod music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Playing back music stored on mobile devices . . . . . . . . . . . . . . . . . . . . . 46

Using a mobile device to play songs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

En 3

SETTINGS 47

Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Setting the setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Setup menu list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Updating the unit’s firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Using “Network Update” in the setup menu to update firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Updating firmware with connection of a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Initializing the unit’s settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Initializing basic unit settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Initializing network settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

APPENDIX 60

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

When surround effect is not enough . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

How to install YRB-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Basic Knowledge of Surround Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

What is Surround Sound? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

What is a Digital Sound Projector? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Yamaha’s Audio Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Audio/video information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Network information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Available signal information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

➤ Supplied accessories En 4

Before connecting, make sure you have received all of the following items.

SRT-1500

The unit

Supplied accessories

• The supplied optical cable may not be needed depending upon connections.

Preparing remote control

Before installing batteries or using the remote control, be sure to read battery and

remote control precautions in “Quick Reference Guide” (separate booklet).

About this manual

• In this manual, operations that can be performed using either the front panel keys or the remote control

are explained using the remote control.

• indicates supplementary explanations for better use.

• indicates precautions for use of the unit and its feature limitations.

Supplied accessories

Remote control Batteries

(AAA, R03, UM-4; x2)

Optical cable

(1.5 m (4.9 ft))

Owner’s Manual CD-ROM Quick Reference Guide MusicCast Setup Guide

Installing the batteries

Operation range

Battery × 2

(AAA, R03, UM-4)

Peel off the protection sheet

before use.

Within 6m (20ft)

FEATURES ➤ What you can do with this unit En 5

FEATURES

What you can do with this unit

Audio Audio/

Video

HDMI

Control

Sound beams are reflected off walls using unique

real surround sound formats and techniques,

allowing listeners to enjoy their preferred

acoustic environment.

• Enjoy realistic surround sound

with five surround modes: MOVIE,

MUSIC, SPORTS, GAME, TV

PROGRAM (CINEMA DSP)

. p. 22

• Clear playback of speech (dialog,

narration, etc.; CLEAR VOICE)

. p. 24

TV remote

control

HDMI Control

BD/DVD player

Audio/

Video

This unit’s

remote control

Audio

Control

Bluetooth

headphones

Network contents

Mobile

devices

The unit

Mobile

devices

Sequential operation of a TV,

this unit, and BD/DVD player

(HDMI Control)

. p. 19

Wide variety of supported content

• Media server (PC/NAS)

. p. 41

• Internet radio

. p. 42

•AirPlay

. p. 44

• Music stored on mobile

devices

. p. 46

Listen to audio input to

the unit with Bluetooth

headphones or speakers

. p. 28

Plays back audio content

from Bluetooth

devices

. p. 26

Mastering

dedicated

apps

. p. 6

FEATURES ➤ What you can do with this unit En 6

Mastering useful apps

You can operate and program the unit, or play streaming services via the unit, by installing the free dedicated apps, MusicCast CONTROLLER and HOME THEATER CONTROLLER

(WLAN) on a mobile device such as a smartphone. For details, search for MusicCast CONTROLLER and HOME THEATER CONTROLLER (WLAN) on the App Store or Google Play.

MusicCast CONTROLLER

This app allows you to play distributed content and streaming services via the unit.

MusicCast CONTROLLER capabilities

• Play songs stored on computers (servers)

• Select an Internet radio station

• Play music stored on mobile devices

• Distribute and receive audio between the unit and other Yamaha network A/V devices

See MusicCast Setup Guide for details.

HOME THEATER CONTROLLER (WLAN)

This app allows you to configure specific settings such as sound beams.

• In this manual, iOS and Android mobile devices are collectively referred to as “mobile devices”. The specific

type of mobile device is noted in explanations as needed.

FEATURES ➤ Controls and functions En 7

1 Indicators

Indicate the status of the unit (p. 8). The indicators will dim

automatically if no operations are performed for 5 seconds.

• “Dimmer” can adjust the brightness of the front panel display

in the setup menu (p. 51).

2 Remote control sensor

Receive infrared signals from the remote control (p. 10).

3 CONNECT key

Use to control the unit using the dedicated MusicCast

CONTROLLER app for mobile devices. See the MusicCast

Setup Guide for details.

4 INPUT key

Select an audio input source (p. 21).

5 VOLUME (+/–) keys

Adjust the volume of the unit (p. 21).

6 z key

Turn on/off the unit.

7 Dual built-in subwoofers

The built-in subwoofers are located in the bottom part of the

unit.

• When the unit is turned off, this unit consumes a small amount of

power in order to search for HDMI signals or to receive infrared

signals from the remote control.

Controls and functions

Front panel

34 5 621

FEATURES ➤ Controls and functions En 8

1 STATUS indicator

The STATUS indicator shows the unit’s power status.

Glows green: The unit is on

Glows red: The unit is off (with HDMI control or

network standby activated)

Off: The unit is off

2 Audio input indicator

The corresponding indicator glows to show the input source

to which audio is selected.

3 SURROUND indicator

Glows when surround playback is selected and turns off

when stereo playback is selected.

Glows when the MOVIE, MUSIC, SPORTS,

GAME, or TV PROGRAM key on the remote

control is pressed (surround playback).

Turns off when the STEREO key on the remote

control is pressed (stereo playback).

4 indicator

Glows when connected to a wireless network; turns off when

the connection is terminated (p. 31).

5 indicator

Glows blue when connected to a Bluetooth device; turns off

when the Bluetooth connection is terminated (p. 25).

❑ Other indications

In addition to indications explained 1–5, other indicators

on the front panel may glow or flash to indicate operation and

setting status.

In this manual, illustrations of the nine in-line indicators

are used for explanation.

: Off

: Glows

: Flashes

Example: When the STATUS indicator flashes and the TV

indicator glows

Indicators

STATUS TV HDMI ANALOG BLUETOOTH NET SURROUND

13452

Glows Input source to be played back

TV TV audio

HDMI

Audio from a device connected to the

HDMI IN jack

ANALOG

Audio from a device connected to the

ANALOG input jack

BLUETOOTH Audio from a Bluetooth device

NET Audio input via a network

STATUS

TV HDMI ANALOG BLUETOOTH NET

Example: when TV is selected

SURROUND

FEATURES ➤ Controls and functions En 9

1 HDMI IN jack

For connecting an HDMI-compatible playback device such

as a BD/DVD player, a satellite and cable TV tuner, and a

game console (p. 15).

2 HDMI OUT (ARC) jack

For connecting to an HDMI-compatible TV and outputting

video/audio signals (p. 14).

3 NETWORK jack

For connecting to a network with a network cable (p. 16).

4 TV (digital optical) jack

For connecting to a playback device equipped with a digital

optical audio output jack (p. 14).

5 ANALOG jack

For connecting an external device with a 3.5 mm RCA stereo

cable (p. 15).

6 SUBWOOFER OUT jack

For connecting an external subwoofer (p. 16).

7 UPDATE ONLY jack

Use to update this unit’s firmware (p. 58).

8 Power cable

For connecting to an AC wall outlet (p. 16).

9 Antenna

Raise the antenna after the TV is installed (p. 13).

Rear panel

HDMI

IN OUT(ARC)

NETWORK TV

ANALOG SUBWOOFER

OUT

UPDATE

ONLY

1234567 8

Jack cover

Remove the jack cover from the top of the unit to

connect cables. Once cables are connected, reattach

the jack cover.

Jack cover

FEATURES ➤ Controls and functions En 10

1 Input selector keys

Select an audio input source to be played back (p. 21).

2 Surround mode key

Choose a surround playback mode from MOVIE, MUSIC,

SPORTS, GAME, TV PROGRAM (p. 22).

3 CLEAR VOICE key

Turns the CLEAR VOICE function on or off (p. 24).

4 S/T/W/X keys, ENTER key

Change the setting (p. 47).

5 SETUP key

Displays the setup menu (p. 47).

6 SUBWOOFER (+/–) key

Adjust the volume of the subwoofer (p. 21).

7 POSITION (L/C/R) keys

For optimum surround sound effect, select a preset position

mode according to where the unit is installed (p. 18).

8 z key

Turn on/off the unit (p. 21).

9 NET RADIO (1–3) keys

stations via the unit (p. 42).

0 CH LEVEL key

Adjust the volume balance during playback (p. 23).

a STEREO key

Switch to stereo playback mode (p. 22).

b INFO key

Use the indicator on the front panel to show information for

audio currently playing (p. 23).

c RETURN key

Return to the previous menu screen.

d MUTE key

Mute the sound (p. 21).

e VOLUME (+/–) key

Adjust the volume of the unit (p. 21).

Remote control

Infrared signal transmitter

TV TV

HDMI Device connected via the HDMI IN jack

ANALOG

Device connected via the ANALOG input

jack

BLUETOOTH Bluetooth device

NET Audio last input via a network

PREPARATIONS ➤ General setup procedure En 11

PREPARATIONS

This completes all the preparations. Enjoy playing movies, music and other content with the unit!

• See “NETWORKS” (p. 30) for information regarding network connection and audio playback via a network.

General setup procedure

1 Installation (p. 12)

Position the unit to achieve the optimal surround sound effects.

Raise the wireless antenna in preparation for network connection using a wireless router

(access point).

2 Connecting a TV (p. 14)

Connect a TV to the unit.

3 Connecting playback devices (p. 15)

Connect video devices (such as BD/DVD players) to the unit.

4 Other connections (p. 16)

Connect an external subwoofer.

Use a network cable to connect the unit to a router in preparation for wired network connection.

5 Connecting the power cable (p. 16)

After all the connections are complete, plug in the power cable.

6 Initial settings (p. 17)

Specify unit settings before use to adjust surround sound effects based on position and

conditions.

PREPARATIONS ➤ a Installation En 12

Place the unit on a flat surface, such as the top of a TV stand, and then place the TV on top of the unit. When installing this unit on a rack behind which there is limited space, for

example, it may be easier to connect external devices to this unit first. See pages 14 to 16 for information regarding the connection of external devices.

a Installation

Notes

• Be sure to install this unit on a large, stable stand where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.

• Do not raise the antenna until after the TV is placed on top of the unit. The antenna, the unit, the TV, and any other devices in the near vicinity may be damaged if the TV snags the antenna when it is placed on top of the

unit. Take all necessary precautions to prevent this from happening as it may lead to unexpected injury.

• The unit’s speakers are not magnetically shielded. Do not install hard disk drives or similar devices near the unit.

• Do not stack the unit directly on top of other playback devices, or vice versa. Heat and vibrations may result in damage or malfunction.

• Never fix the unit to a wall or other surface using a fall prevention device, such as wire or bracket, supplied with the TV. Doing so may cause the unit fall together with the TV if an accident such as an earthquake occurs.

Read the instruction manual of your TV carefully and fix the TV to a wall or sturdy object following the instruction.

Recommended place for installation

CRT TVs cannot be placed on the unit.

If the TV base is too large to fit on top of the unit, place the

unit in another location such as on an open shelf. In that

case, make sure that the shelf is well-ventilated with enough

clearance around the unit to prevent the heat from

accumulating inside the unit.

Do not install the unit near a corner

of the room.

• TVs that can be placed on the unit are flat-screen TVs that

weigh no more than 40 kg (88.1 lbs), have bases no wider

than 750 mm (29-1/2") and no deeper than 340 mm (13-3/8"),

and have screens no larger than 55 inches.*

• Place the TV so that its base does not protrude from the

unit’s edges. *

• The listening position (such as sofa, etc.)

should be located at the front of the unit.

• The distance between the listening position

and the unit should be more than 2 m (6.6 ft).

To achieve the optimal surround sound

effects, be sure that obstacles such as

furniture may not obstruct the path of

sound beams (p. 13).

1 2 3 4 5 6

PREPARATIONS ➤ a Installation En 13

❑ Unit installation position and surround sound effects

The unit achieves surround sound by reflecting sound beams off walls.

Effective surround effect may not be achieved in the following environment.

• Sound beams are blocked by obstacles such as furniture.

• The room size is not within the following dimensions;

Width: 3 meters to 7 meters (9.8 ft to 23 ft)

Depth: 3 meters to 7 meters (9.8 ft to 23 ft)

Height: 2 meters to 3.5 meters (6.6 ft to 11.5 ft)

• Listening position is too close to the unit.

• The unit is installed too close to the left or right wall.

• The unit is installed in the corner of the room.

• There is no wall for reflecting sound beam on the path of the sound beams.

• The optimum surround sound effect is achieved by setting a position according to the installation position of

the unit. For details, refer to “Setting a surround sound effect for the installation position” (p. 18).

Raising the antenna

Raise the antenna on the rear panel of the unit when connecting a wireless router

(access point) to use a network.

• Do not apply excessive force on the antenna. Doing so may damage it.

• Be sure to check the direction in which the antenna moves, and angle it in the proper direction.

• Do not remove the antenna.

• For details on the wireless connection, refer to p. 31.

Hold the base of

the antenna while

raising it to its

upright position.

1 2 3 4 5 6

PREPARATIONS ➤ b Connecting a TV En 14

Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit.

• Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m is recommended to prevent degradation of signal quality.

• For playback of 3D and 4K video content, use a high-speed HDMI cable.

Connect the TV to the unit with an HDMI cable (not supplied).

• This unit supports HDCP version 2.2, a copy protection technology. To enjoy playback of 4K video, connect

the unit to the HDMI IN jack (one compatible with HDCP 2.2) on an HDCP 2.2-compliant TV.

When connecting a TV that supports Audio Return Channel (ARC), enable the HDMI

control function (p. 50).

• Use an ARC-compatible HDMI cable.

Connect the TV to the unit with an HDMI cable (not supplied) and an optical cable.

• If the TV has no optical jack

Use a 3.5 mm stereo mini plug cable to connect the unit to the TV via the ANALOG input jack on the unit

and the audio output jack on the TV. TV audio can be played through this unit by switching input to

ANALOG using the ANALOG key on the remote control.

b Connecting a TV

TVs that support Audio Return Channel (ARC)

Audio Return Channel (ARC)

ARC enables input and output of audio signals via a single HDMI cable. If the TV supports ARC, audio

signals from the TV can be input to this unit via the same HDMI cable used to output video signals from

this unit to the TV.

HDMI

(ARC)

HDMI

OUT(ARC)

HDMI HDMI

The unit (rear)

HDMI OUT (ARC) jack

ARC-compatible HDMI input

TVs that do not support Audio Return Channel (ARC)

HDMI

OPTICAL

HDMI

OUT(ARC)

HDMI HDMI

The unit

(rear)

HDMI OUT (ARC) jack

HDMI input

TV jack

Audio output

(digital optical)

1. Remove the cap 2. Check the direction of

the plug

1 2 3 4 5 6

PREPARATIONS ➤ c Connecting playback devices En 15

Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles to the unit. Depending on the video/audio output jacks available on your video device,

choose one of the following connections. We recommend using an HDMI connection if the video device has an HDMI output jack.

Connect a video device to the unit with an HDMI cable (not supplied).

TV audio can be played through this unit by switching input to HDMI using the HDMI

key on the remote control.

• Once the HDMI control function has been activated (p. 19), video and audio content from playback devices

can be output from the TV even when this unit is off (HDMI signal pass-through).

• Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m is

recommended to prevent degradation of signal quality.

• For playback of 3D and 4K video content, use a high-speed HDMI cable.

• If the video device has an HDCP 2.2-compliant HDMI output jack, connect the unit to that jack.

• Audio from the video device can be input via the TV (digital optical) jack, not via the HDMI IN jack. Use an

optical cable to connect the video device to the unit via the digital optical output jack on the video device

and the TV jack on the unit. If the video device is connected to the unit in this way, change the “HDMI”

setting in the setup menu from “Audio Assign” to “Optical”.

Connect a video device to this unit via a 3.5 mm stereo mini plug cable (not supplied).

Next, connect the video device’s video output to the TV’s video input.

TV audio can be played through this unit by switching input to ANALOG using the

ANALOG key on the remote control.

c Connecting playback devices

HDMI connection

HDMI

HDMI HDMI

The unit (rear)

HDMI IN jack

HDMI output

Video device

Analog connection

ANALOG

The unit (rear)

ANALOG jack

Audio output

(analog)

Video device

To video

output jack

To video

input jack

3.5 mm stereo mini

plug cable

1 2 3 4 5 6

PREPARATIONS ➤ d Other connections En 16

Connecting an external subwoofer

The unit has built-in subwoofers. However, you can connect an external subwoofer to

enhance low-frequency sounds. Connect a subwoofer via the SUBWOOFER OUT jack

on this unit.

• Use an external subwoofer with a built-in amplifier.

Wired network connections

For a wired connection, connect one end of the network cable to the NETWORK jack on

the rear panel of the unit and the other end to a router. For details, refer to

“NETWORKS” (p. 30).

After all the connections are complete, plug in the power cable.

d Other connections

INPUT

SUBWOOFER

OUT

The unit (rear)

SUBWOOFER OUT jack

Subwoofer pin cable

(not supplied)

Subwoofer

e Connecting the power cable

The unit (rear)

To an AC wall outlet

1 2 3 4 5 6

PREPARATIONS ➤ f Initial settings En 17

Displaying the menu screen on the TV

Visual operation of this unit is

possible by displaying its menu

screen on the TV.

Turn on the unit and the TV, and

then use the input button on the

TV’s remote control to switch input

so that video input from this unit is

displayed.

When this unit and the TV are

connected as shown below,

select “HDMI 1”.

The menu display

The menu is displayed on the TV screen when the SETUP key is

pressed. When the TV is receiving HDMI signals, the menu is

superimposed over video content. Press the SETUP key twice to

cancel menu display.

f Initial settings

TV remote control (example)

Switch

input

sources

HDMI INPUT

123

HDMI

OUT(ARC)

HDMI

TVThe unit (rear)

Setup Menu

Sound

HDMI

Function

Information

Channel Level

Dynamic Range

Audio Delay

Initial screen display

When the unit is turned on for the first time after purchase, the

screen below will be displayed and the indicator on the front

panel will flash slowly.

While this screen is displayed, an iOS device (such as an

iPhone) can be used to easily connect the unit to a wireless

network. See the Quick Reference Guide.

If you will not use an iOS device to connect to a wireless

network, press the RETURN key.

• You can use this function to connect to a wireless network at any time by

selecting “Share Wi-Fi Settings (iOS)” from the setup menu. However, be

aware that if a different wireless network, or a Bluetooth device, has already

been configured, doing so will erase any previous settings.

• This screen will not be displayed and the indicator will not flash if the unit

is connected to a router via its NETWORK jack (wired connection).

Share Wi-Fi Settings

You can share the wireless

(Wi-Fi) settings of the

network with Sound Projector

using a device with iOS7 or

later.

[ENTER]:Start

[RETURN]:Cancel

[ ]:OSD Language

Flashes slowly

1 2 3 4 5 6

SETUP

RETURN

PREPARATIONS ➤ f Initial settings En 18

Selecting the language for menu display

Turn the unit and TV on.

Switch the TV’s input to display video input from this unit (p. 17).

Press and hold the SETUP key until the “OSD Language” menu

appears on the TV.

When the menu is not displayed

• Confirm the following cases.

– The HDMI input jack of your TV and the HDMI OUT (ARC) jack of the unit are connected.

– The input of your TV is set to “HDMI 1” (example).

Use the S/T key to select the desired language and press the

ENTER key.

Settings

, ENGLISH (default), DEUTSCH, FRANÇAIS, ESPAÑOL, ITALIANO, NEDERLANDS,

РУССКИЙ, SVENSKA, TÜRK

Press the SETUP key to exit the setup menu.

Setting a surround sound effect for the installation

position

The surround sound is achieved by reflecting the sound beams off walls as shown in

the illustration below. For optimum surround effect, turn on the unit and select the

POSITION key according to the installation position of the unit.

Hold down the POSITION key that corresponds to the installation

position of the unit for more than 3 seconds.

The indicators on the front panel flash according to the set position.

OSD Language

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

ITALIANO

NEDERLANDS

РУССКИЙ

SVENSKA

TÜRK

Left

Center

Right

L (Left)

R (Right)

C (Center)

(default setting)

Left side of room

Center of room

Right side of room

1 2 3 4 5 6

PREPARATIONS ➤ f Initial settings En 19

Operating the unit by TV’s remote control (HDMI control)

HDMI Control allows you to operate external devices via HDMI. If you connect a TV that

supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as

power and volume) with TV remote control operations. You can also control playback

devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with

an HDMI cable.

Coordinated functions via the TV remote control

First, try the operations described above with your TV’s remote control. If you are able

to perform these operations, you may continue operating this unit with your TV’s remote

control. The HDMI control function can be used with some HDMI devices by simply

activating the function. If you are not able to perform these operations, configure HDMI

control settings (p. 20).

With some TVs, navigating this unit’s menus displayed on the TV can be controlled.

• Even if your TV supports the HDMI control function, some functions may not be available. For details, refer

to the manual supplied with your TV.

• We suggest using devices (TV, BD/DVD player, etc.) from the same manufacturer.

What is the HDMI control function?

Remote control of TV (Example)

1. Turn on/off

Both the TV and this unit turn on/off at the same time.

3. Control volume

This unit’s volume can be adjusted when the TV’s audio

output is set to the external device.

4. Switch the audio output device (TV or this unit)

2. Switch input sources

• The input source for this unit switches accordingly when the TV’s

input source is switched. The input source for this unit also switches

when a BD/DVD player is selected as the input source from the TV’s

menu display.

• The input source can be switched while this unit is turned off.

1 2 3 4 5 6

PREPARATIONS ➤ f Initial settings En 20

Turn on the unit, TV, and playback devices.

Activate the HDMI control function on the unit, TV,

and playback devices such as BD/DVD players that

support this function.

For this unit, be sure that “HDMI Control” is set to “On”

(default; p. 50).

For playback devices, refer to the instructions supplied with

each device.

Turn off the main power of the TV and then turn off

the unit and playback devices.

Turn on the unit and playback devices and then turn

on the TV.

Switch the TV input to display the video from the

unit.

Press the HDMI key to select HDMI input, and check

that video from the playback device is properly

displayed.

Check that the unit is properly coordinated with the

TV by turning off the TV or adjusting the TV volume

with the TV remote control.

When the connected devices and jacks are changed, configure the

settings again with the following procedure.

Disable the HDMI control function of the TV and BD/

DVD player, turn off all connected devices, and

change the connections.

Follow steps 1 to 7 of “Setting the HDMI control

function”.

Setting the HDMI control function

HDMI

Glows (green)

If devices are not coordinated

Be sure that all devices are correctly connected to this unit, and

that settings are properly configured as described below.

– “HDMI Control” (p. 50) is set to “On” in the setup menu.

– The HDMI control function is enabled on the TV.

The example of TV settings

• From the setup menu on your TV, select “Link setting” 

“HDMI control setting”, then set a setting such as “HDMI

control function” to “ON”.

• Set audio output to any option other than TV.

If devices fail to coordinate even after the settings described

above have been applied correctly:

– Turn off this unit and the TV, and then turn them back on again.

– Disconnect the power cable of the unit and external devices

connected to the unit via HDMI cable. Plug them in again after

about 30 seconds.

– If devices fail to coordinate after ANALOG is input, repeat

steps 5 and 6 under “Setting the HDMI control function”.

Changing the connection method and

connected devices

1 2 3 4 5 6

HDMI

PLAYBACK ➤ Basic operation for playback En 21

PLAYBACK

Press the z key to turn on this unit.

Turn on devices (TV, BD/DVD player, game console,

etc.) connected to this unit.

Select a device by pressing the input selector key

corresponding to the connection of external

devices.

Press the HDMI key to play audio/video content from a BD/

DVD player connected via the HDMI IN jack.

For playback from a Bluetooth device, refer to p. 25. For

audio playback via a network, refer to p. 41 to 46.

Play back a device selected in step 3.

• When listening to audio or watching video from a playback device

connected to the TV, select the device as the TV's input source.

Press the VOLUME (+/–) key to adjust the volume.

Press the SUBWOOFER (+/–) key to adjust the

volume of the subwoofer.

When the volume is adjusted, indicators on the front panel

indicate volume level.

• When audio is output from both TV speaker and this unit,

mute the TV sound.

• When sound input to HDMI IN jack is output from the TV,

the volume level does not change even if you press the

VOLUME (+/–) key or the MUTE key.

To mute the audio output

To mute the sound, press the MUTE key.

To resume the volume, press the MUTE key again or press

the VOLUME (+/–) key.

• The subwoofer volume can be adjusted separately from the whole volume.

• Lowering the subwoofer volume is recommended at night.

Select from surround playback or stereo playback

mode, and configure sound setting according to

your preferences (p. 22).

Basic operation for playback

HDMI

Glows

Indicator on the front panel

Volume down (–) Volume up (+)

Volume display

The number of lighted indicators increases when the volume is turned

up, and decreases when the volume is turned down.

Press the z key to turn off this unit after use.

Volume down (–) Volume up (+)

Subwoofer volume display

The lighted indicator moves to the right when the volume is turned up,

and to the left when the volume is turned down.

MUTE

VOLUME

(+/

)

SUBWOOFER

(+/

)

Input

selector

keys

PLAYBACK ➤ Enjoying sound based on your preference En 22

Selecting a surround sound effect

Select the surround mode to enjoy realistic surround effects that

closely resemble a movie theater, the middle of a music concert, or

a sports field event, by Yamaha’s sound field program, “CINEMA

DSP.” You can select a surround mode that best suits the source

from MOVIE, MUSIC, SPORTS, GAME, or TV PROGRAM.

Press one of the surround mode keys (MOVIE,

MUSIC, SPORTS, GAME, or TV PROGRAM).

The features of surround modes are described below.

Select the surround mode that best suits the playback source and

your personal taste.

• When the source is a 2-channel stereo signal, the sound is played back as

surround sound.

2-channel playback (stereo playback mode)

The front channels are the primary channel sources for output of

stereo sound.

Press the STEREO key to switch to stereo playback

mode.

Enjoying sound based on your preference

Surround mode

Sound field

program

Features

MOVIE

Creates a broad and expansive cinematic space. With

Dolby or DTS surround effects, this program enriches

your cinematic experience.

MUSIC

Creates the palpable excitement, as if you were standing

at the front center of a live concert hall event.

SPORTS

Creates the realistic atmosphere of a live sports event or

talk show.

GAME

Enjoy three-dimensional sound effects with computer or

video games.

TV PROGRAM Creates optimum surround sound for TV programs.

SURROUND

Glows

Indicator on the front panel

SURROUND

Off

Indicator on the front panel

STEREO

INFO

Surround

mode keys

PLAYBACK ➤ Enjoying sound based on your preference En 23

Adjusting volume for each channel

Adjust the volume of playback for each channel (audio in each

direction) so that sounds are evenly distributed in their respective

directions.

• Refer to “Channel Level” (p. 49) when adjusting the volume of each channel with

the test sound.

Hold down the CH LEVEL key for more than 3

seconds.

Press the CH LEVEL key to select adjustable

channel from the followings.

The output channel changes as follows each time the CH

LEVEL key is pressed.

• Subwoofer volume can only be adjusted in stereo playback mode (p. 22).

Press the S/T key to adjust the volume.

Example of volume balance

• If you have problems hearing words: Select C (center) to increase the level.

When the sound is not like surround sound: Select SL (surround left) and SR

(surround right) to increase the level.

• The volume of the subwoofer also can be adjusted by using the SUBWOOFER (+/

–) key.

• When the position setting is changed (p. 18), the channel level setting will be

overwritten.

Viewing audio information

Information regarding audio currently playing can be viewed.

Press the INFO key.

The following information regarding audio currently playing

is displayed via indicators on the front panel while the INFO

key is held down.

a Audio from a TV that supports ARC is currently being

input to the unit via the HDMI cable

b Input signal: DTS

c Input signal: Dolby Digital

d Dolby Pro Logic II is currently in use (2-channel audio

signal is input)

e CLEAR VOICE is enabled (p. 24)

Indicators on the front panel

Front (left)

Center

Front (right)

Surround (right)

Surround (left)

Subwoofer

Returns to Front (left)

Volume down (T) Volume up (S)

Display while volume is adjusted

The lighted indicator moves to the right when the volume is turned up,

and to the left when the volume is turned down.

1 2345

CH LEVEL

INFO

SUBWOOFER

(+/

)

 / 

PLAYBACK ➤ Enjoying sound based on your preference En 24

Clear playback of human voices

(CLEAR VOICE)

Human voices, such as lines in movies and TV shows, or news and

sports commentary, are played back very clearly.

Press the CLEAR VOICE key to turn on the CLEAR

VOICE function.

Press the key again to turn off the function.

Flashes three times and then turns off

Indicators on the front panel

Flashes once and then turns off

CLEAR

VOICE

PLAYBACK ➤ Wireless playback of audio via Bluetooth connection En 25

You can receive and play audio from a Bluetooth device, such as a mobile device or digital music player, over a wireless connection. Yamaha’s exclusive Compressed Music

Enhancer technology improves sound quality characteristics for the richness and depth of original audio before it is compressed.

You can also transmit audio input to the unit to Bluetooth speakers or headphones.

See documentation supplied with your Bluetooth device for more information.

• Audio cannot be received by the unit from mobile devices and the like, and transmitted to speakers or

headphones at the same time.

• “Bluetooth” in the setup menu must be set to “On” (default; p. 56) to use Bluetooth functions.

Wireless playback of audio via Bluetooth connection

Bluetooth device

(such as a mobile

device)

Receive and play audio with the unit

Transmit and play audio from the unit

Bluetooth speakers/

headphones

Perform the following steps on the Bluetooth device to be connected.

For the first Bluetooth connection For subsequent Bluetooth connection

Pair the unit and Bluetooth device

When connecting to a Bluetooth

device for the first time, “pairing”

between the device and unit is

required. Pairing is required for

connecting a Bluetooth device for the

first time.

Connect Bluetooth device and play back

PLAYBACK ➤ Wireless playback of audio via Bluetooth connection En 26

Listening to music from a

Bluetooth

device

Press the BLUETOOTH key on the remote control.

Bluetooth is selected as the input.

• If you are unable to select Bluetooth as an input source, be sure that the

following settings have been applied.

– “Bluetooth” in the setup menu is set to “On” (p. 56)

– “Transmission” in the setup menu is set to “Off” (p. 56)

Turn on the Bluetooth device to be paired, and

perform pairing.

The operation varies depending on the device. Refer to the

instruction manual supplied with the device.

Select “SRT-1500” in the Bluetooth device list on the

device.

If a passkey (PIN) is required, enter the number “0000”.

When pairing is completed, or a completion message

appears on the Bluetooth device.

The indicator on the unit’s front panel flashes while the

unit and Bluetooth device are being paired, and glows

steadily when pairing is complete.

Play back a song on the Bluetooth device.

• Perform pairing with the Bluetooth device and unit within 10 m (33 ft) of each

other.

• The unit can be paired with up to 20 Bluetooth devices for receiving and

transmitting audio. If a new device is successfully paired with the unit after 20

other devices have already been paired, the device with the earliest connecting

date will have been unpaired to make room for the new device.

•If a Bluetooth device has been connected before, the unit will connect to the last

connected device when the BLUETOOTH key is pressed with step 1. Terminate

this connection to pair a new device.

• Refer to “Bluetooth” (p. 62) in “Troubleshooting” if paring is not possible.

Pairing a Bluetooth device with the unit

BLUETOOTH

Glows

SRT-1500

PIN 0 0 0 0

123

456

7 8 9

BLUETOOTH

PLAYBACK ➤ Wireless playback of audio via Bluetooth connection En 27

Press the BLUETOOTH key on the remote control

when the unit is turned on.

Bluetooth is selected as the input.

• If you are unable to select Bluetooth as an input source, be sure that the

following settings have been applied.

– “Bluetooth” in the setup menu is set to “On” (p. 56)

– “Transmission” in the setup menu is set to “Off” (p. 56)

Turn on the Bluetooth device.

Select “SRT-1500” in the Bluetooth device list on the

device.

Play back a song on the Bluetooth device.

•Perform Bluetooth connection with the device and unit within 10 m (33 ft) of each

other.

• Adjust the volume level of the Bluetooth device as required.

•If a Bluetooth device has been connected before, the unit will connect to the last

connected device when the BLUETOOTH key is pressed with step 1. Terminate

this connection to connect to a different Bluetooth device.

• Setting “Network Standby” in the setup menu to “On” allows the unit to be turned

on and off with Bluetooth device operations.

Bluetooth connection is terminated in the following cases.

The indicator on the unit’s front panel turns off when the

connection is terminated.

•The Bluetooth device is turned off.

• The BLUETOOTH key is pressed for more than 3 seconds.

• The unit is turned off.

Playing back audio from a Bluetooth device

on the unit

BLUETOOTH

Glows

Glows steadily

Connection established

Flashes

Connecting

Terminating Bluetooth connection

BLUETOOTH

PLAYBACK ➤ Wireless playback of audio via Bluetooth connection En 28

Listening to audio through

Bluetooth

speakers or headphones (transmitting)

Turn on the Bluetooth device.

Select the input source (other than BLUETOOTH)

with the input selector keys.

Press the SETUP key twice.

The setup menu is displayed on the TV screen.

Use the S/T keys to select “Bluetooth”, and then

press the ENTER key.

Use the S/T keys to select “Transmission”, and

then press the ENTER key.

Use the S/T keys to select “On”, and then press

the ENTER key.

Use the S/T keys to select “Device Search”, and

then press the ENTER key.

Use the S/T keys to select a Bluetooth device, and

then press the ENTER key.

When a connection has been established (the device has

been paired with the unit), “Completed” will be displayed on

the TV screen.

The indicator on the unit’s front panel flashes while the

unit and Bluetooth device are being paired, and glows

steadily when pairing is complete.

•A Bluetooth device that has been assigned a passkey (PIN) other than “0000”

cannot be connected to the unit.

• The unit cannot connect to a Bluetooth device if “Bluetooth” in the setup menu is

not set to “On” (p. 56).

• Perform pairing with the Bluetooth device and unit within 10 m (33 ft) of each

other.

• The unit can be paired with up to 20 Bluetooth devices for receiving and

transmitting audio. If a new device is successfully paired with the unit after 20

other devices have already been paired, the device with the earliest connecting

date will have been unpaired to make room for the new device.

• “Not found” is displayed on the screen with step 8 when the unit cannot recognize

the name of the device.

• Refer to “Bluetooth” (p. 62) in “Troubleshooting” if paring is not possible.

Pairing a Bluetooth device with the unit

▲

ABCDE 1

FGHIJ 2

abcde 3

fghij 4

▼

[ENTER]:Confirm

[RETURN]:Cancel

Device Search

SETUP

 / 

ENTER

Input

selector

keys

PLAYBACK ➤ Wireless playback of audio via Bluetooth connection En 29

• Be sure that “Transmission” in the setup menu is set to “On” (p. 56).

• Connection to a Bluetooth device is not possible during playback using AirPlay

(p. 44).

Turn on the Bluetooth device.

Select the input source (other than BLUETOOTH)

with the input selector keys.

If a Bluetooth device has been connected before, the unit

will connect to the last connected device. Proceed to step

To connect to a different device, proceed to step 3.

Follow steps 3 through 8 under “Pairing a Bluetooth

device with the unit” to pair the device with the unit.

When a connection has been established (the device has

been paired with the unit), “Completed” will be displayed on

the TV screen.

The indicator on the unit’s front panel flashes while the

unit and Bluetooth device are being paired, and glows

steadily when pairing is complete.

Audio from the input source will play.

•Perform Bluetooth connection with the device and unit within 10 m (33 ft) of each

other.

•Adjust Bluetooth device volume as needed.

• Audio will also be output from the unit.

Terminating

Bluetooth

connection

Bluetooth connection is terminated in the following cases.

The indicator on the unit’s front panel turns off when the

connection is terminated.

• The connection is terminated from the Bluetooth device, or

the Bluetooth device is turned off.

• “Transmission” in the setup menu is set to “Off”.

• The unit is turned off.

Playing back audio input from the unit

through Bluetooth speakers or

headphones

Input

selector

keys

NETWORKS ➤ Connecting to a network En 30

NETWORKS

You can choose between wired network connection and wireless network connection (p. 31) depending upon your network environment.

Network connection allows you to listen to Internet radio stations and play music files with AirPlay or your computer (media service) via this unit. You can operate the unit with a mobile

device to which the MusicCast CONTROLLER app has been installed, allowing you to enjoy listening to a variety of audio sources via this unit.

• Some security software installed on your computer, or network device settings (such as a firewall), may

block the unit’s access to your computer or Internet radio stations. Should this occur, change security

software and/or network device settings.

• A network connection cannot be established if the MAC address filter on your router is enabled. Check your

router’s settings.

• To configure your router’s subnet mask manually, apply the same subnet used by this unit to all devices.

• Use of a broadband connection is recommended when using Internet services.

• If your router supports DHCP, network settings for the unit need not be configured. Network parameters

(such as the IP address) will be assigned automatically. If your router does not support DHCP, or if you

prefer to configure network parameters manually, you must configure network settings yourself (p. 53).

• You can verify that network parameters (such as the IP address) have been properly assigned to the unit by

selecting “Information” (p. 53) from the setup menu.

• See our website for more information on the MusicCast CONTROLLER app.

Wired network connections

To use a wired network connection, connect the unit to a router via an STP network

cable (category 5 or higher straight cable; not supplied).

• If the unit is already connected to a wireless network and you would like to switch to a wired connection,

change “Network” in the setup menu to “Wired”.

Connecting to a network

NETWORK

LAN

WAN

The unit (rear)

Internet

Network Attached Storage

(NAS)

Modem

Mobile device

Router

Network cable

NETWORKS ➤ Connecting to a network En 31

Wireless network

Connect the unit to a wireless router (access point).

For details on connection, see “Connecting the unit to a wireless network”.

The indicator on the front panel glows when the unit is connected to a wireless

network.

• You cannot use the wireless network connection simultaneously with the wired network connection (p. 30)

or Wireless Direct (p. 39).

• If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless

router (access point). In such case, place them close to each other.

• If the unit will not be connected to a wireless router (access point), Wireless Direct (p. 39) can be used to

play music files stored on your mobile device via the unit.

Connecting the unit to a wireless network

Select the connection method appropriate for your network environment from “Wireless

(Wi-Fi)” in the setup menu.

Choosing a connection method

The unit

Internet

Modem

Mobile device

Wireless router

(access point)

Glows (green)

Connection method Operation

WPS Button

Use the WPS button on your wireless router

(access point) to establish a wireless

connection.

Share Wi-Fi Settings (iOS)

Apply network settings from an iOS device

(such as an iPhone).

Access Point Scan

Select an access point from a list displayed

after a search of available access points.

Manual Setting

Establish a wireless network connection by

entering required information, such as the SSID,

manually.

PIN Code

Establish a wireless connection by registering

the unit’s PIN with your wireless router (access

point). This method can be used if the wireless

router (access point) supports the WPS PIN

feature.

If you want to: Use this connection method

Use an iOS device to easily connect to a

network

Share Wi-Fi Settings (iOS) (p. 32)

Connect to a wireless router (access point)

that supports the WPS (push button) feature

WPS Button (p. 33)

Connect to a wireless router (access point)

that supports the WPS PIN feature

PIN Code (p. 38)

Connect to a network by search for a nearby

access point

Access Point Scan (p. 34)

Connect directly to an access point that

cannot be located

Manual Setting (p. 36)

Wireless(Wi-Fi)

Select a setup method.

·WPS Button

·Share Wi-Fi Settings (iOS)

·Access Point Scan

·Manual Setting

·PIN Code

[ENTER]:OK

[RETURN]:Cancel

NETWORKS ➤ Connecting to a network En 32

You can easily setup a wireless connection by applying the

connection settings on iOS devices (

such as an iPhone).

Before proceeding, confirm that your iOS device is connected to a

wireless router (access point).

• You need iOS device with iOS 7.1 or later.

• The connection settings on iOS devices cannot be applied to the unit to establish

a wireless connection if your wireless router (access point) uses WEP encryption.

See “Searching for a wireless router (access point)” (p. 34) to establish a

connection.

Press the z key to turn on this unit.

Turn on the TV and switch the TV input to display

video from the unit (HDMI OUT jack; p. 17).

Press the SETUP key twice.

The setup menu is displayed on the TV screen.

Use the S/T keys to select “Network”, and then

press the ENTER key.

Use the S/T keys to select “Network Connection”,

and then press the ENTER key.

Use the S/T keys to select “Wireless (Wi-Fi)”, and

then press the ENTER key.

Use the S/T keys to select “Share Wi-Fi Settings

(iOS)”, and then press the ENTER key.

When the following screen is displayed, press the

ENTER key.

• The settings to be deleted (initialized) will be displayed. If you do not want to

delete these settings, press the RETURN key to terminate the connection.

When the following screen is displayed, press the

ENTER key.

Sharing the iOS device setting

Network Connection

Wired

Wireless(Wi-Fi)

Wireless Direct

Wireless(Wi-Fi)

Select a setup method.

·WPS Button

·Share Wi-Fi Settings (iOS)

·Access Point Scan

·Manual Setting

·PIN Code

[ENTER]:OK

[RETURN]:Cancel

Share Wi-Fi Settings

If Sharing is begun, the

following settings will be

initialized.

·Network settings

·NET presets

·All music service account

information

·Bluetooth settings

[ENTER]:Start

[RETURN]:Cancel

Share Wi-Fi Settings

Make sure your iOS device is

connected to your Wi-Fi

network, and then open the

Wi-Fi settings screen of

your iOS device.

[ENTER]:Confirm

[RETURN]:Cancel

SETUP

RETURN

 / 

ENTER

NETWORKS ➤ Connecting to a network En 33

Display the Wi-Fi setup screen on the iOS device

and select the unit from “SETUP A NEW AIRPLAY

SPEAKER...”.

Follow the on-screen instructions displayed on the iOS

device.

You can easily set up a wireless connection with one push of the

WPS button.

Press the z key to turn on this unit.

Turn on the TV and switch the TV input to display

video from the unit (HDMI OUT jack; p. 17).

Press the SETUP key twice.

The setup menu is displayed on the TV screen.

Use the S/T keys to select “Network”, and then

press the ENTER key.

Use the S/T keys to select “Network Connection”,

and then press the ENTER key.

Use the S/T keys to select “Wireless (Wi-Fi)”, and

then press the ENTER key.

Use the S/T keys to select “WPS Button”, and then

press the ENTER key.

Push the WPS button on the wireless router (access

point).

Press the ENTER key.

When a connection has been established (the device has

been paired with the unit), “Completed” will be displayed on

the TV screen.

If “Not connected” is displayed, press the ENTER key to

repeat the process beginning with step 6, or see the

information below to try another connection method.

• The WPS button cannot be used to establish a wireless connection if your

wireless router (access point) uses WEP encryption, or if the router’s MAC

address filter is enabled. See “Searching for a wireless router (access point)”

(p. 34) to establish a connection.

• The WPS button cannot be used to establish a wireless connection if your

wireless router (access point) is configured so that it does not broadcast its SSID.

See “Setting up the wireless connection manually” (p. 36) to establish a

connection.

Using the WPS push button configuration

Network Connection

Wired

Wireless(Wi-Fi)

Wireless Direct

About WPS

WPS (Wi-Fi Protected Setup) is a standard established by the

Wi-Fi Alliance, which allows easy establishment of a wireless

home network.

Wireless(Wi-Fi)

Select a setup method.

·WPS Button

·Share Wi-Fi Settings (iOS)

·Access Point Scan

·Manual Setting

·PIN Code

[ENTER]:OK

[RETURN]:Cancel

SETUP

 / 

ENTER

NETWORKS ➤ Connecting to a network En 34

Find and connect to a nearby wireless router (access point).

Press the z key to turn on this unit.

Turn on the TV and switch the TV input to display

video from the unit (HDMI OUT jack; p. 17).

Press the SETUP key twice.

The setup menu is displayed on the TV screen.

Use the S/T keys to select “Network”, and then

press the ENTER key.

Use the S/T keys to select “Network Connection”,

and then press the ENTER key.

Use the S/T keys to select “Wireless (Wi-Fi)”, and

then press the ENTER key.

Use the S/T keys to select “Access Point Scan”,

and then press the ENTER key.

The list of available access points appears on the TV

screen.

Use the S/T keys to select the desired access point

and press the ENTER key.

The wireless connection setting screen appears on the TV.

Press the ENTER key.

Use the W/X/S/T and ENTER keys to enter the

security key.

Once the security key been entered, select “OK”, and then

press the ENTER key. The screen will return to that

displayed in step 8.

Searching for a wireless router (access

point)

Network Connection

Wired

Wireless(Wi-Fi)

Wireless Direct

Wireless(Wi-Fi)

Select a setup method.

·WPS Button

·Share Wi-Fi Settings (iOS)

·Access Point Scan

·Manual Setting

·PIN Code

[ENTER]:OK

[RETURN]:Cancel

Access Point Scan

▲

SSID : Access Point 1

Security: WPA2-PSK(AES)

Security Key

Connect

▼

[ENTER]:Confirm

[RETURN]:Cancel

*****_

( ) [ ] { } < > * ! ? # % &

. , : ; _ | / \ $ ~ ^ ' " `

0 1 2 3 4 5 6 7 8 9 @ + - =

A B C D E F G H I J K L M

N O P Q R S T U V W X Y Z

a b c d e f g h i j k l m ←

n o p q r s t u v w x y z →

Space BKSP DELETE CLEAR

CANCEL

[]/[]: Move the cursor left and right.

[Space]: Enter a space.

[BKSP]: Delete the character to the left of the selected one.

[DELETE]: Delete the selected character.

[CLEAR]: Delete all characters entered.

[CANCEL]: Cancel character entry, and return to the previous screen.

SETUP

 / 

 / 

ENTER

NETWORKS ➤ Connecting to a network En 35

Use the S/T keys to select “Connect” and press the

ENTER key to start the connection process.

When a connection has been established (the device has

been paired with the unit), “Completed” will be displayed on

the TV screen.

If “Not connected” is displayed press the ENTER key to

repeat the process beginning with step 6, or see the

information below to try another connection method.

• “Access Point Scan” cannot be used to establish a wireless connection if

your wireless router (access point) is configured so that it does not

broadcast its SSID. See “Setting up the wireless connection manually”

(p. 36) to establish a connection.

Press the SETUP key to exit the setup menu.

SETUP

 / 

ENTER

NETWORKS ➤ Connecting to a network En 36

Setup the SSID (network name), encryption method and security

key for your network manually.

Press the z key to turn on this unit.

Turn on the TV and switch the TV input to display

video from the unit (HDMI OUT jack; p. 17).

Press the SETUP key twice.

The setup menu is displayed on the TV screen.

Use the S/T keys to select “Network”, and then

press the ENTER key.

Use the S/T keys to select “Network Connection”,

and then press the ENTER key.

Use the S/T keys to select “Wireless (Wi-Fi)”, and

then press the ENTER key.

Use the S/T keys to select “Manual Setting”, and

then press the ENTER key.

Use the S/T keys to select “SSID”.

Use the W/X/S/T keys and the ENTER key to enter

the SSID of the access point.

Once the security key been entered, select “OK”, and then

press the ENTER key. The screen will return to that

displayed in step 8.

Use the S/T keys to select “Security” and the W/X

keys to select the encryption method.

Settings

None, WEP, WPA2-PSK (AES), Mixed Mode

• As communications are not encrypted when “None” is selected, selecting

this option poses the risk that third parties may access the unit without your

permission.

Setting up the wireless connection

manually

Network Connection

Wired

Wireless(Wi-Fi)

Wireless Direct

Wireless(Wi-Fi)

Select a setup method.

·WPS Button

·Share Wi-Fi Settings (iOS)

·Access Point Scan

·Manual Setting

·PIN Code

[ENTER]:OK

[RETURN]:Cancel

Manual Setting

▲

SSID :

Security: None

Security Key

Connect

▼

[ENTER]:Confirm

[RETURN]:Cancel

abc_

( ) [ ] { } < > * ! ? # % &

. , : ; _ | / \ $ ~ ^ ' " `

0 1 2 3 4 5 6 7 8 9 @ + - =

A B C D E F G H I J K L M

N O P Q R S T U V W X Y Z

a b c d e f g h i j k l m ←

n o p q r s t u v w x y z →

Space BKSP DELETE CLEAR

CANCEL

[]/[]: Move the cursor left and right.

[Space]: Enter a space.

[BKSP]: Delete the character to the left of the selected one.

[DELETE]: Delete the selected character.

[CLEAR]: Delete all characters entered.

[CANCEL]: Cancel character entry, and return to the previous screen.

SETUP

 / 

 / 

ENTER

NETWORKS ➤ Connecting to a network En 37

Use the S/T keys to select “Security Key” and

press the ENTER key.

• If you select “None” in step 10, this item is not available.

Use the W/X/S/T and ENTER keys to enter the

security key.

If you select “WEP” in step 10, enter either 5 or 13

character string, or 10 or 26 hexadecimal (base 16) keys.

If you select the method other than “WEP”, enter either 8 to

63 character string, or 64 hexadecimal (base 16) keys.

• Hexadecimal (base 16) keys use combinations of the numbers 0 through 9

and the letters a through f. Letters are not case sensitive.

Once the security key been entered, select “OK”, and then

press the ENTER key. The screen will return to that

displayed in step 8.

Use the S/T keys to select “Connect” and press the

ENTER key to start the connection process.

When a connection has been established (the device has

been paired with the unit), “Completed” will be displayed on

the TV screen.

If “Not connected” is displayed press the ENTER key to

repeat the process beginning with step 6.

Press the SETUP key to exit the setup menu.

*****_

( ) [ ] { } < > * ! ? # % &

. , : ; _ | / \ $ ~ ^ ' " `

0 1 2 3 4 5 6 7 8 9 @ + - =

A B C D E F G H I J K L M

N O P Q R S T U V W X Y Z

a b c d e f g h i j k l m ←

n o p q r s t u v w x y z →

Space BKSP DELETE CLEAR

CANCEL

[]/[]: Move the cursor left and right.

[Space]: Enter a space.

[BKSP]: Delete the character to the left of the selected one.

[DELETE]: Delete the selected character.

[CLEAR]: Delete all characters entered.

[CANCEL]: Cancel character entry, and return to the previous screen.

SETUP

 / 

 / 

ENTER

NETWORKS ➤ Connecting to a network En 38

to establish a connection.

Press the z key to turn on this unit.

Turn on the TV and switch the TV input to display

video from the unit (HDMI OUT jack; p. 17).

Press the SETUP key twice.

The setup menu is displayed on the TV screen.

Use the S/T keys to select “Network”, and then

press the ENTER key.

Use the S/T keys to select “Network Connection”,

and then press the ENTER key.

Use the S/T keys to select “Wireless (Wi-Fi)”, and

then press the ENTER key.

Use the S/T keys to select “PIN Code”, and then

press the ENTER key.

The list of available access points appears on the TV

screen.

Use the S/T keys to select the desired access point

and press the ENTER key.

The PIN code of the unit appears on the TV screen.

Enter the unit’s PIN code into the wireless router

(access point).

For details on settings, refer to the instruction manual of the

wireless router (access point).

Press the ENTER key to start the connection

process.

When a connection has been established (the device has

been paired with the unit), “Completed” will be displayed on

the TV screen.

If “Not connected” is displayed press the ENTER key to

repeat the process beginning with step 6, or see the

information below to try another connection method.

• The PIN code cannot be used to establish a wireless connection if your

wireless router (access point) uses WEP encryption, or if the router’s MAC

address filter is enabled. See “Searching for a wireless router (access

point)” (p. 34) to establish a connection.

Press the SETUP key to exit the setup menu.

Using the WPS PIN code

Network Connection

Wired

Wireless(Wi-Fi)

Wireless Direct

Wireless(Wi-Fi)

Select a setup method.

·WPS Button

·Share Wi-Fi Settings (iOS)

·Access Point Scan

·Manual Setting

·PIN Code

[ENTER]:OK

[RETURN]:Cancel

PIN Code

PIN Code:00000000

Enter the PIN code

into the access point.

Press ENTER to start

the connection process.

[ENTER]:Start

[RETURN]:Cancel

SETUP

 / 

ENTER

NETWORKS ➤ Connecting to a network En 39

Connecting a mobile device to the unit directly (Wireless Direct)

Connect a mobile device directly to the unit without using a wireless

router (access point).

Wireless Direct supports the following.

– Operation of the unit using a mobile device to which the

dedicated MusicCast CONTROLLER or HOME THEATER

CONTROLLER (WLAN) app has been installed.

– Use of AirPlay to play music files stored on an iOS device.

• You cannot use Wireless Direct simultaneously with the wired network connection

(p. 30) or the wireless network connection (p. 31).

• When Wireless Direct is enabled, the unit cannot connect to the Internet.

Therefore, you cannot use any kind of Internet service such as Internet radio.

Press the z key to turn on this unit.

Turn on the TV and switch the TV input to display

video from the unit (HDMI OUT jack; p. 17).

Press the SETUP key twice.

The setup menu is displayed on the TV screen.

Use the S/T keys to select “Network”, and then

press the ENTER key.

Use the S/T keys to select “Network Connection”,

and then press the ENTER key.

Use the S/T keys to select “Wireless Direct”, and

then press the ENTER key.

Use the S/T keys to select “Security” and the W/X

keys to select the encryption method.

Settings

None, WPA2-PSK (AES)

In most cases, “WPA2-PSK (AES)” should be selected. If

your mobile device does not support “WPA2-PSK (AES)”,

select “None”.

• As communications are not encrypted when “None” is selected, selecting

this option poses the risk that third parties may access the unit without your

permission.

Use the S/T keys to select “Security Key” and

press the ENTER key.

• If you select “None” in step 7, this item is not available.

The unitMobile device

Network Connection

Wired

Wireless(Wi-Fi)

Wireless Direct

SETUP

 / 

 / 

ENTER

NETWORKS ➤ Connecting to a network En 40

Use the W/X/S/T and ENTER keys to enter the

security key.

Enter either 8 to 63 character string, or 64 hexadecimal

(base 16) keys.

• Hexadecimal (base 16) keys use combinations of the numbers 0 through 9

and the letters a through f. Letters are not case sensitive.

Once the security key been entered, select “OK”, and then

press the ENTER key. The screen below will be displayed.

• Before proceeding to the next step, record the following information. These

information will be needed to configure the Wi-Fi setting of a mobile device.

– SSID displayed on the TV screen

– Security key you have just entered

Use the S/T keys to select “Save” and press the

ENTER key to save the setting.

This completes the settings and “Set the mobile device.”

will be displayed on the TV screen. The unit functions as an

access point.

Next, configure the Wi-Fi settings of a mobile device.

Configure the Wi-Fi settings of a mobile device.

For details on settings of your mobile device, refer to the

instruction manual of the mobile device.

a Enable the Wi-Fi function on the mobile device.

b Select the SSID displayed in step 9 from the list of available

access points.

c When you are prompted for a password, enter the security key

displayed in step 9.

Press the SETUP key to exit the setup menu.

*****_

( ) [ ] { } < > * ! ? # % &

. , : ; _ | / \ $ ~ ^ ' " `

0 1 2 3 4 5 6 7 8 9 @ + - =

A B C D E F G H I J K L M

N O P Q R S T U V W X Y Z

a b c d e f g h i j k l m ←

n o p q r s t u v w x y z →

Space BKSP DELETE CLEAR

CANCEL

[]/[]: Moves the cursor left and right.

[Space]: Enter a space.

[BKSP]: Delete the character to the left of the selected one.

[DELETE]: Delete the selected character.

[CLEAR]: Delete all characters entered.

[CANCEL]: Cancel character entry, and return to the previous screen.

Wireless Direct

▲

SSID : SRT-1500 XXXXXX

Security: WPA2-PSK(AES)

Security Key

: *************

Save

▼

[ENTER]:Confirm

[RETURN]:Cancel

SETUP

 / 

 / 

ENTER

NETWORKS ➤ Playing back music stored on media servers (PCs/NAS) En 41

You can play back music files stored on your PC or DLNA-compatible NAS on the unit.

• To use this function, the unit and your PC must be connected to the same router (p. 30). You can check

whether the network parameters (such as the IP address) are properly assigned to the unit in “Information”

(p. 53) in the setup menu.

• The audio may be interrupted while using the wireless network connection. In this case, use the wired

network connection.

• The following file formats are supported.

– The unit supports playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC, FLAC and ALAC

(Apple Lossless Audio Codec) files (1- or 2-channel audio only).

– The unit is compatible with sampling rates of up to 192 kHz for WAV and FLAC files, 96 kHz for ALAC

files, and 48 kHz for other files.

– The unit supports gapless playback of WAV, FLAC and ALAC files.

– To play back FLAC files, you need to install server software that supports sharing of FLAC files via DLNA

on your PC or use a NAS that supports FLAC files.

– Digital Rights Management (DRM) contents cannot be played back.

Media sharing setup

To play back music files stored on your PC or DLNA-compatible NAS, first you need to

configure the media sharing setting on each music server.

This unit supports Windows Media Player 11 or later. This section explains Windows

Media Player 12 setup as an example.

Start Windows Media Player 12 on your PC.

Select “Stream”, then “Turn on media streaming”.

Click “Turn on media streaming”.

Select “Allowed” from the drop-down list next to the unit’s model

name.

Click “OK” to exit.

Refer to the instruction manual for the device or software and configure the media

sharing settings.

Playing music files

Use the MusicCast CONTROLLER app installed on your mobile device to play music

files.

• Configure basic settings for the MusicCast CONTROLLER app before playing music files.

• Refer to the supplied “MusicCast Setup Guide” for details.

Playing back music stored on media servers (PCs/NAS)

For a PC with Windows Media Player installed

For a PC or a NAS with other DLNA server software

installed

NETWORKS ➤ Listening to Internet radio En 42

You can listen to Internet radio stations from all over the world.

• To use this function, the unit must be connected to the Internet (p. 30). You can check whether the network parameters (such as the IP address) are properly assigned to the

unit in “Information” (p. 53) in the setup menu.

• You may not be able to receive some Internet radio stations.

• The unit uses the vTuner Internet radio station database service.

• This service may be discontinued without notice.

Playback of Internet radio

Use the MusicCast CONTROLLER app installed on your mobile

device to select an Internet radio station.

• Configure basic settings for the MusicCast CONTROLLER app before selecting

an Internet radio station.

• Refer to the supplied “MusicCast Setup Guide” for details.

Registering favorite Internet radio stations

Assign Internet radio stations to the NET RADIO keys on the remote

control, or save them in the vTuner Bookmarks folder.

Select the desired Internet radio station.

Press and hold one of the NET RADIO keys (1–3) for

at least 3 seconds.

❑ Tuning into assigned Internet radio stations

Press the NET RADIO key (1–3) to which the desired

Internet radio station has been assigned.

The input source switches to NET, and streaming begins.

Listening to Internet radio

Assigning a station to a NET RADIO key

STATUS TV HDMI ANALOG BLUETOOTH NET SURROUND

Glows

NET RADIO

1-3

NETWORKS ➤ Listening to Internet radio En 43

You can also register your favorite Internet radio stations on the vTuner website.

Select any of Internet radio stations on the unit.

This operation is necessary to register the radio station for the first time.

Check the vTuner ID of the unit.

You can find the vTuner ID in “Information” (p. 53) in the setup menu.

Access the vTuner website (http://yradio.vtuner.com/) with the web

browser on your PC and enter the vTuner ID.

• To use this feature, you need to create your personal account. Create your account using your e-mail

address.

Click the “Add” icon ( ) next to the station name.

• To remove the station from the “Bookmarks” folder, select “Bookmarks” in the Home screen, and then

click the “Remove” icon ( ) next to the station name.

Registering the station on the vTuner website

You can switch the language.

Enter the vTuner ID in this area.

NETWORKS ➤ Playing back music with AirPlay En 44

The AirPlay function allows you to play back iTunes or iPod music on the unit via

network.

• This section describes “iPod touch”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod touch”,

“iPhone” and “iPad”, unless otherwise specified.

• To use this function, the unit and your PC or iPod must be connected to the same router (p. 30). You can

check whether the network parameters (such as the IP address) are properly assigned to the unit in

“Information” (p. 53) in the setup menu.

• When using a multiple SSID router, access to the unit might be restricted depending on the SSID to

connect. Connect the unit and iPod to the same SSID.

• The AirPlay function can be used with an iPhone, iPad, or iPod touch running iOS 4.3.3 or later, a Mac

running OS X version 10.8 “Mountain Lion” or later, or a Mac or Windows computer with iTunes 10.2.2 or

later installed.

Playback of iTunes/iPod music contents

Follow the procedure below to play back iTunes/iPod music contents on the unit.

Turn on the unit, and start iTunes on the PC or display the playback

screen on the iPod.

If the iTunes/iPod recognizes the unit, the AirPlay icon ( ) appears.

• If the icon does not appear, check whether the unit and PC/iPod are connected to the router properly.

On the iTunes/iPod, click (tap) the AirPlay icon and select the unit

(network name of the unit) as the audio output device.

Playing back music with AirPlay

The unit

iTunes

iPod

Router

(wired or

wireless)

(wired or

wireless)

iTunes (example) iPod iOS7/iOS8 (example) iPod iOS6 (example)

SRT-1500 XXXX

iTunes (example) iPod (example)

Network name of the unit

NETWORKS ➤ Playing back music with AirPlay En 45

Select a song and start playback.

To operate playback, use the Music app on the iPod or iTunes on the PC.

The input source switches to NET, and playback begins.

• You can turn on the unit automatically when starting playback on iTunes or iPod by setting “Network

Standby” (p. 55) in the setup menu to “On”.

• You can edit the network name (the unit’s name on the network) displayed on iTunes/iPod in “Network

Name” (p. 55) in the setup menu.

• You can adjust the unit’s volume from the iTunes/iPod during playback.

Caution

• When you use iTunes/iPod controls to adjust volume, the volume may be unexpectedly loud. This could

result in damage to the unit or speakers. If the volume suddenly increases during playback, stop

playback on the iTunes/iPod immediately.

NET

Glows

NETWORKS ➤ Playing back music stored on mobile devices En 46

Use this function to play music stored on your mobile device over a network.

• To use this function, the unit and your PC or mobile device must be connected to the same router (p. 30).

You can check whether the network parameters (such as the IP address) are properly assigned to the unit

in “Information” (p. 53) in the setup menu.

• When using a multiple SSID router, access to the unit might be restricted depending on the SSID to

connect. Connect the unit and mobile device to the same SSID.

Using a mobile device to play songs

Use the MusicCast CONTROLLER app installed on your mobile device to operate

playback.

• Configure basic settings for the MusicCast CONTROLLER app before playing music.

• Refer to the supplied “MusicCast Setup Guide” for details.

Playing back music stored on mobile devices

The unit

Mobile device

Router

(wired or

wireless)

Caution

• When you use mobile device controls to adjust volume, the volume may be unexpectedly loud. This

could result in damage to the unit or speakers. If the volume suddenly increases during playback, stop

playback on the mobile device immediately.

SETTINGS ➤ Setup menu En 47

SETTINGS

A variety of settings for this unit can be specified and adjusted from the setup menu. Among the options available are channel volume control,

HDMI settings, and network settings.

The setup menu is displayed on, and operated from, the TV screen. See “Displaying the menu screen on the TV” (p. 17) for instructions on

displaying the setup menu on the TV.

Setting the setup menu

Press the SETUP key.

To display the Network or Bluetooth menu, press the

SETUP key again.

• Hold down the SETUP key for more than 3 seconds to display “OSD

Language” directly on the screen (p. 18, 51).

• If an update for the unit’s firmware is available, an envelope icon ( ) will be

displayed in the setup menu (p. 57).

Use the S/T key to select a menu and then press

the ENTER key.

Repeat these steps to display the desired menu.

The X key can be used in place of the ENTER key.

Press the W key or RETURN key to return to the previous

menu.

Use the S/T key to change the setting value of each

menu.

Press the SETUP key again to exit the setup menu.

Setup menu

Setup Menu

Sound

HDMI

Function

Information

Channel Level

Dynamic Range

Audio Delay

Setup menu

Setup Menu

Sound

HDMI

Function

Information

Channel Level

Dynamic Range

Audio Delay

SETUP

RETURN

 / 

 / 

ENTER

SETTINGS ➤ Setup menu En 48

Setup menu list

Menu Item Function Page

Sound

Channel Level

Front L, Front R, Center, Surround L, Surround R,

Subwoofer

Adjust the volume of each channel. 49

Dynamic Range Specify dynamic range. 49

Audio Delay Adjust the delay between video and audio output. 49

HDMI

HDMI Control Turn HDMI control on or off. 50

HDMI Audio Out Choose whether HDMI audio input is played via this unit or the TV. 50

Audio Assign

Specify the audio input from the TV jack or HDMI IN jack when HDMI is selected as

the input source.

Function

Dimmer Adjust the brightness of indicators on the front panel. 51

OSD Language Change the language used for menus displayed on the TV screen. 51

Auto Power Standby Turn Auto Power Standby on or off. 51

Information

Audio Display audio input signal information. 52

Video Display video input signal information. 52

System Display this unit’s firmware version. 52

Network

Information Display the unit’s network information. 53

Network Connection Select the network connection method. 53

IP Address

DHCP, IP Address, Subnet Mask, Default

Gateway, DNS Server (P), DNS Server (S)

Configure the network parameters (such as IP address). 54

MAC Address Filter Filter, MAC Address 1–10 Set the MAC address filter to limit access to the unit from other network devices. 54

Network Standby Enable/disable the function that turns on the unit from other network devices. 55

Network Name

Edit the network name (the unit’s name on the network) displayed on other network

devices.

Network Update Perform Update Update the firmware via the network. 55

Bluetooth

Bluetooth Enable/disable the Bluetooth functions. 56

Transmission

Turn the function that transmits audio to a Bluetooth device, such as Bluetooth

speakers, on or off.

Device Search

Search for the Bluetooth device, such as Bluetooth speakers, to which audio will be

transmitted.

MAC Address Display the MAC address for the Bluetooth connection. 56

SETTINGS ➤ Setup menu En 49

Sound

Adjust the volume of each channel to balance output levels. Use test sounds output

from each channel to adjust volume for optimal balance.

Item

Front L, Front R, Center, Surround L, Surround R, Subwoofer

Adjustable range

-10 to +10

Adjust this unit’s dynamic range (difference between maximum and minimum volumes).

Settings

TV images sometimes lag behind the sound. You can use this function to delay the

sound output to synchronize it with the video image.

Settings

Channel Level

Setup Menu

➜

Sound

➜

Channel Level

Dynamic Range

Setup Menu

➜

Sound

➜

Dynamic Range

Auto (default) Set dynamic range at a level that supports comfortable listening at low volumes.

Standard The dynamic range recommended for regular home use.

Max Output sound without adjusting the dynamic range of the input signals.

Audio Delay

Setup Menu

➜

Sound

➜

Audio Delay

0 ms–500 ms Specify audio output timing in increments of 5 ms.

Auto (default)

Adjust the delay between video and audio output automatically when a TV that

supports an automatic lipsync function is connected to the unit via HDMI.

SETTINGS ➤ Setup menu En 50

HDMI

Use to configure the settings related to HDMI signals and the HDMI control function.

Turn HDMI control (p. 19) on or off.

Settings

This setting can be configured only when “HDMI Control” is set to “Off”.

Use to select a device to play back HDMI audio signals.

Settings

• When “HDMI Control” is set to “On”, select the audio output device based on the settings configured for the

TV connected to this unit.

• HDMI video signals input to the HDMI IN jack of this unit are always output from the HDMI OUT (ARC) jack

of this unit.

Specify whether audio is input via the HDMI IN jack or the TV (digital optical) jack of the

unit when HDMI is selected as the input source.

Settings

HDMI (default), Optical

HDMI Control

Setup Menu

➜

HDMI

➜

HDMI Control

Off (default)

Disable the control function. The standby power consumption of this unit

decreases.

On Enable the control function.

HDMI Audio Out

Setup Menu

➜

HDMI

➜

HDMI Audio Out

AMP (default) Play back the input sound signal.

Plays audio content from the TV connected to the HDMI OUT (ARC) jack.

Volume cannot be adjusted from the unit. Use the TV to adjust volume.

Audio Assign

Setup Menu

➜

HDMI

➜

Audio Assign

SETTINGS ➤ Setup menu En 51

Function

Adjust the brightness of indicators on the front panel.

Settings

-2 (off), -1 (normal; default), 0 (bright)

• If this function is set to “-2” or “-1”, the display brightens only when operations are performed with this unit.

Use to select the language used for menus displayed on the TV screen.

Settings

• Hold down the SETUP key for more than 3 seconds to display “OSD Language” directly on the TV screen.

• The settings may be changed automatically when using the TV which supports the HDMI control function.

Turn Auto Power Standby on or off.

When this function is activated, the unit turns off when it is not in use.

Settings

Off (default setting other than U.K., Europe and Russia models), On (default setting for U.K., Europe

and Russia models)

When “Auto Power Standby” is set to “On”, the unit automatically turns off as indicated

below

• Audio is input to the unit, but no operations have been performed with the unit for

more than 8 hours.

• HDMI, BLUETOOTH or NET is selected as the input source, but no audio has been

input to the unit or no operations have been performed with the unit for more than 20

minutes.

• HDMI is selected as the input source, but no playback device has been connected to

the unit’s HDMI IN jack for more than 20 minutes.

5 minutes before the auto power standby function automatically turns the unit off, the

indicators on the front panel indicate a countdown until the unit is turned off.

• Auto Power Standby can also be turned on or off using the keys on the front panel (p. 60).

Dimmer

Setup Menu

➜

Function

➜

Dimmer

OSD Language

Setup Menu

➜

Function

➜

OSD Language

Menus are displayed in Japanese.

ENGLISH

(default)

Menus are displayed in English.

DEUTSCH Menus are displayed in German.

FRANÇAIS Menus are displayed in French.

ESPAÑOL Menus are displayed in Spanish.

ITALIANO Menus are displayed in Italian.

NEDERLANDS Menus are displayed in Dutch.

РУССКИЙ Menus are displayed in Russian.

SVENSKA Menus are displayed in Swedish.

TÜRK

Menus are displayed in Turkish.

Auto Power Standby

Setup Menu

➜

Function

➜

Auto Power Standby

5 minutes before

One indicator turns off for every minute that passes.

10 seconds before

The blinking indicator moves to the left for every second that passes.

...  9 seconds before  10 seconds before

SETTINGS ➤ Setup menu En 52

Information

Display information for the audio and video signal input to this unit.

The following information on the current audio input signal is displayed.

• The audio bit rate or sampling frequency may not be displayed for some input signals.

The following information on the current video input signal is displayed.

Display the version of firmware currently installed on this unit.

Audio

Setup Menu

➜

Information

➜

Audio

Format Digital audio format

Number of channels

The number of channels contained within the input signal—front/

surround/low frequency effects (LFE). Example: “3/2/0.1” means signal

contains 3 front channels, 2 surround channels, and LFE.

If the signal contains channels other than front, surround, and LFE, the

total number of channels may be displayed. Example: “5.1ch”.

Sampling frequency The sampling frequency of the digital input signal

Bit rate The per-second bit rate of the input signal

Video

Setup Menu

➜

Information

➜

Video

Type HDMI or DVI

Resolution Video signal resolution

System

Setup Menu

➜

Information

➜

System

SETTINGS ➤ Setup menu En 53

Network

Configures the network settings.

• Some menus are not superimposed over video content on the TV screen.

Display the network information on the unit.

• The options displayed vary according to the type of network connection (Wired/Wireless (Wi-Fi)/Wireless

Direct).

Select the network connection method.

Settings

Information

Setup Menu

➜

Network

➜

Information

Status The connection status of the NETWORK jack

Connection Connection method

MC Network The connection status of MusicCast Network

SSID The access point to which the unit is connected

Security The encryption method for your network

MAC Address MAC address (Ethernet/Wi-Fi)

IP Address IP address

Subnet Mask Subnet mask

Default Gateway The IP address of the default gateway

DNS Server (P) The IP address of the primary DNS server

DNS Server (S) The IP address of the secondary DNS server

vTuner ID The ID of the Internet radio (vTuner)

Network Connection

Setup Menu

➜

Network

➜

Network Connection

Wired

Select this option when connecting the unit to a network with a network

cable (not supplied).

Wireless (Wi-Fi)

Select this option when connecting the unit to a network via the wireless

router (access point).

Wireless Direct Select this option when connecting a mobile device to the unit directly.

SETTINGS ➤ Setup menu En 54

Configure the network parameters (such as IP address).

❑ DHCP

Select whether to use a DHCP server.

Settings

Manual network settings

Set “DHCP” to “Off”.

Use the S/T keys to select a parameter type.

Use the W/X keys to move the edit position and the S/T keys to

select a value.

Press the ENTER key.

The MAC address filter limits network devices that can be used to operate the unit.

When operating the unit via an app on a mobile device, specify the MAC address of the

device.

• Operation of the AirPlay function (p. 44) or DLNA-compatible device (p. 41) is not limited by this setting.

❑ Filter

Enable/disable the MAC address filter.

Settings

❑ MAC Address 1–10

Specify the MAC addresses (up to 10) of the network devices that will operate the unit

when “Filter” is set to “On”.

Use the S/T keys to select an MAC address number (1 to 10).

Use the W/X keys to move the edit position and the S/T keys to

select a value.

Press the ENTER key.

IP Address

Setup Menu

➜

Network

➜

IP Address

Off

The DHCP server is not used. Configure the network parameters

manually. For details, see “Manual network settings”.

On (default)

The DHCP server is used to automatically obtain the unit’s network

parameters (such as IP address).

IP Address Specify an IP address.

Subnet Mask Specify a subnet mask.

Default Gateway Specify the IP address of the default gateway.

DNS Server (P) Specify the IP address of the primary DNS server.

DNS Server (S) Specify the IP address of the secondary DNS server.

MAC Address Filter

Setup Menu

➜

Network

➜

MAC Address Filter

Off (default) Disable the MAC address filter.

Enable the MAC address filter. In “MAC Address 1–10”, specify the MAC

addresses of the network devices that will operate the unit.

SETTINGS ➤ Setup menu En 55

Turn the function that controls the unit’s power (Network Standby) when a network

device or Bluetooth device is operated on or off.

Settings

• The unit consumes more power when “Network Standby” is set to “On” than when it is set to “Off”.

Edit the name displayed for this device (the unit’s name on the network) on other

network devices. A name up to 15 characters in length may be specified.

Use the W/X keys to move the edit position and the S/T keys to

select a character.

• The following alphanumeric characters and symbols may be used.

()[]{}<>*!?#%&.,:;_|/\$~^'"`0–9@+-=A–Za–z

Press the RETURN key.

Update the firmware via the network.

Perform Update

This option is available after firmware has been updated. For details, see “Updating the

unit’s firmware” (p. 57).

Network Standby

Setup Menu

➜

Network

➜

Network Standby

Off Disable the network standby function.

On (default)

Enable the network

standby function.

The unit’s power can be controlled using the MusicCast

CONTROLLER or HOME THEATER CONTROLLER (WLAN)

app installed on your mobile device.

The unit will turn on and off in accordance with the

following Bluetooth device operations.

Coordinated power on

When a Bluetooth device is connected to this unit while it is

off, this unit turns on and the input source switches to

BLUETOOTH.

Coordinated power off

When a Bluetooth device is disconnected from this unit

while it is on, this unit turns off.

(Only when BLUETOOTH is selected as the input source.)

Network Name

Setup Menu

➜

Network

➜

Network Name

Network Update

Setup Menu

➜

Network

➜

Network Update

Network Name

SRT-1500 1B08FA

[RETURN]:Back

SETTINGS ➤ Setup menu En 56

Bluetooth

Configures the Bluetooth settings.

• Some menus are not superimposed over video content on the TV screen.

Enables/disables the Bluetooth function.

Settings

Transmit audio from the unit to Bluetooth speakers or headphones.

Settings

Select the Bluetooth speakers or headphones to which audio will be transmitted, and

the pair the speakers or headphones with the unit to establish a connection.

Display the MAC address for the Bluetooth connection.

Bluetooth

Setup Menu

➜

Bluetooth

➜

Bluetooth

Off Disable the Bluetooth function.

On (default) Enable the Bluetooth function.

Transmission

Setup Menu

➜

Bluetooth

➜

Transmission

Off (default) Audio can not be transmitted.

Audio input to the unit can be transmitted to Bluetooth speakers or

headphones.

Device Search

Setup Menu

➜

Bluetooth

➜

Device Search

MAC Address

Setup Menu

➜

Bluetooth

➜

MAC Address

SETTINGS ➤ Updating the unit’s firmware En 57

New firmware that provides additional features or product

improvements will be released as needed. If the unit is connected

to the Internet, you can download the firmware via the network and

update it.

When the unit is turned on for the first time after a new version of the

unit’s firmware has been released, a message indicating that a

firmware update is available will be displayed on the TV screen,

and an envelope icon ( ) will be displayed in the setup menu

(p. 47)

The unit’s firmware can be updated as follows.

• Update firmware from “Network Update” in the setup menu.

• Update firmware by connecting a USB flash drive to which the

unit’s firmware update has been saved (p. 58).

• Update firmware using the dedicated MusicCast CONTROLLER

app installed on a mobile device. Follow MusicCast

CONTROLLER guides to operate the app and update the

firmware.

Using “Network Update” in the setup menu

to update firmware

Press the SETUP key twice.

The setup menu is displayed on the TV screen.

Use the S/T keys to select “Network”, and then

press the ENTER key.

Use the S/T keys to select “Network Update”, and

then press the ENTER key.

The following screen is displayed when firmware updates

are available.

• To cancel the operation without updating the firmware, press the SETUP

key.

Press the ENTER key.

The TV screen goes black and firmware update begins.

The indicators on the front panel glow to indicate progress

during the update.

• If there are multiple firmware updates, the indicators will start glowing as

each firmware update begins.

Updating the unit’s firmware

Notes

• Do not operate the unit or disconnect the power cable or network cable during

firmware update. Firmware update takes about 20 minutes or more (depending

on your Internet connection speed).

• If the Internet connection speed is slow, or the unit is connected to the wireless

network, network update may not be possible depending on the condition of

the network connection. In this case, update the firmware using the USB flash

drive (p. 58).

• To perform the following procedure, your TV must be connected to the unit via

HDMI.

• For details on update, visit the Yamaha website.

Network Update

Perform Update

Update progress

SETUP

 / 

ENTER

SETTINGS ➤ Updating the unit’s firmware En 58

When the indicators on the front panel glow alternately as shown

below, press the

z (power) key on the unit's front panel.

The firmware update is complete.

• If the firmware update fails, the indicator at far right will flash blue. Use the z (power) key to turn the unit off

and then on again, and repeat the procedure from step 1 again. If the firmware update fails again, confirm

that the unit is properly connected to a network.

Updating firmware with connection of a USB flash drive

Download the latest firmware version from the Yamaha website to a USB flash drive,

which can then be used to update the unit’s firmware.

See information provided when updating firmware for details.

Save this unit’s firmware to a USB flash drive.

Turn off the unit.

Connect the USB flash drive to the UPDATE ONLY jack on the unit’s

rear panel.

Press the z key on the front panel while pressing the VOLUME – key

on the unit.

The firmware update will begin.

The indicators on the front panel glow to indicate progress during the update.

• If there are multiple firmware updates, the indicators will start glowing as each firmware update

begins.

When the indicators on the front panel glow alternately as shown

below, press the

z (power) key on the unit's front panel.

The firmware update is complete.

• If the firmware update fails, the indicator at far right will flash blue. Use the z (power) key to turn the unit off

and then on again, and repeat the procedure from step 1 again. If the firmware update fails again, confirm

the following.

– The USB flash drive is correctly connected to the UPDATE ONLY jack

– See information provided as firmware updates are performed, and be sure that the USB flash drive

contains the firmware update for this unit.

– The unit is properly connected to a network.

All indicators glow

Alternates

One indicator glows

Update progress

All indicators glow

Alternates

One indicator glows

SETTINGS ➤ Initializing the unit’s settings En 59

Various settings for the unit can be initialized. You can choose to initialize basic unit settings (does not initialize network settings), or to initialize only network settings.

Initializing basic unit settings

The basic unit settings other than network settings will be initialized.

Turn off the unit.

Hold down the z (power) key for more than 3 seconds on the front

panel of the unit.

Once settings have been initialized, the unit turns on, all indicators on the front

panel flash for a moment, and then the unit can be operated.

Initializing network settings

The following settings will be initialized.

• Settings for “Network” and “Bluetooth” in the setup menu

• Internet radio stations assigned to the NET RADIO 1–3 keys

• Bluetooth pairing information

• Follow the instructions for “Initializing basic unit settings” at left to initialize the following two settings.

– Network Standby (p. 55)

– Bluetooth function (p. 56)

Turn off the unit.

Press the z (power) key while pressing the CONNECT key on the

front panel of the unit.

Once settings have been initialized, the unit turns on, all indicators on the front

panel flash for a moment, and then the unit can be operated.

• When network settings are initialized, the “Share Wi-Fi Settings (iOS)” screen will be displayed the next

time the unit is turned on (p. 17).

Initializing the unit’s settings

APPENDIX ➤ Troubleshooting En 60

APPENDIX

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit,

disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center.

General

Troubleshooting

Problem Cause Remedy See page

This unit does not operate

properly.

The internal microcomputer has been frozen by an external electric shock

(such as lightning or excessive static electricity) or by a power supply with

low voltage.

Disconnect the AC power supply cable from the outlet and plug it again in

after 30 seconds. –

This unit fails to turn on when z

key is pressed (the STATUS

indicator flashes red), or the unit

is turned off soon after the power

has been turned on.

The AC power supply cable is not firmly connected to the AC wall outlet. Connect the AC power supply cable firmly to the AC wall outlet. 16

The internal microcomputer has been frozen by an external electric shock

(such as lightning or excessive static electricity) or by a power supply with

low voltage.

Disconnect the AC power supply cable from the outlet and plug it again in

after 30 seconds.

–

This unit is suddenly turned off. The internal temperature becomes too high and the overheat protection

circuitry has been activated.

Wait for about 1 hour for this unit to cool down, turn it back on after

confirming an adequate amount of ventilation space and not to cover this

unit with a cloth.

When the Auto Power Standby function is enabled, this unit turns off

automatically in any of the following situations:

– Audio is coming from the selected input source. However, no operations

have been performed for 8 hours or more.

– HDMI, BLUETOOTH or NET is selected as the input source, but no audio

has been input to the unit or no operations have been performed with the

unit for more than 20 minutes.

– HDMI is selected as the input source, but no playback device has been

connected to the unit’s HDMI IN jack for more than 20 minutes.

Turn on the power of the unit and play back the source again. If the Auto

Power Standby function is not used, set “Auto Power Standby” to “Off” from

the setup menu. Auto Power Standby can also be turned on or off using the

keys on the front panel. With the unit turned off, hold down the INPUT key

and press the z key, both on the front panel. The Auto Power Standby

setting will be reversed and the unit will turn on. The indicator on the

front panel will glow for a few seconds when Auto Power Standby is

switched off, and will not glow when Auto Power Standby is switched on.

The network standby function is enabled, and the Bluetooth connection is

terminated.

Resume the Bluetooth connection using the Bluetooth device, or turn on

this unit and set “Network Standby” to “Off”.

The indicator at far right flashes

blue.

Firmware update has failed. Turn the unit off and then on again, and try updating the firmware again. If

the firmware update fails again, confirm that the unit is properly connected

to a network.

If firmware update using a USB flash drive fails, be sure that the USB flash

drive is properly connected to the UPDATE ONLY jack, and that it contains

the firmware update for this unit.

APPENDIX ➤ Troubleshooting En 61

No sound. Incorrect input or output cable connections. Connect the cable properly. 15

No appropriate input source has been selected. Select an appropriate input source with the input selector keys. 21

The volume is turned down. Turn up the volume. 21

The sound is muted. Press the MUTE or VOLUME (+/–) key to resume audio output and adjust

the volume level.

There is input signal cannot be played back by this unit. Play a source whose signals can be reproduced by this unit. Change the

system settings of the source device.

“HDMI Audio Out” is set to “TV”. Set to “AMP”. 50

“HDMI Control” is set to “Off”. When connecting ARC (Audio Return Channel) supported TV and this unit

using an HDMI cable only, set “HDMI Control” to “On”.

To use this unit with “HDMI Control” set to “Off”, connect the TV’s audio

output jack to this unit’s TV (digital optical) jack via the optical cable.

Sound from an HDMI control-enabled TV is set for output from the TV’s

built-in speakers.

Use the TV’s HDMI settings to set audio output to any option other than the

TV’s built-in speakers.

–

No sound or too small sound from

a specific channel.

The output level of the channel is muted. Raise the output level of the channel. 23, 49

Position is not properly specified. Specify position in accordance with the unit’s installation position. 18

The source is played in stereo playback mode. Switch to surround playback mode. 22

Surround sound effects are

insubstantial.

When connecting this unit with playback device and TV digitally, the output

setting of the playback device and TV is not valid.

Refer to the manual supplied with your device and check the setting.

–

The playback device is set for constant output from 2 channels (PCM, etc.). Change the playback device’s audio output setting. –

Position is not properly specified. Specify position in accordance with the unit’s installation position. 18

There is no wall in the path of the sound beam. Place the sound reflection board in the path of the sound beam. 66

No sound is coming from the

subwoofer.

The volume of the subwoofer is low. Increase the volume of the subwoofer with the SUBWOOFER + key.

The volume of low (bass) tones

from the subwoofer is low.

The volume of the subwoofer is low. Increase the volume of the subwoofer with the SUBWOOFER + key. 21

Content from an input source with a limited support for low tones is playing. Play content from an input source with broader support for low tones to see

if volume is still low.

–

Problem Cause Remedy See page

APPENDIX ➤ Troubleshooting En 62

Bluetooth

The image is not displayed on TV

screen.

The HDMI cable is not securely connected. Connect the HDMI cable properly.

14, 15

The “This content can not be

viewed on your TV. Please

connect the TV which

corresponds to HDCP2.2 with

HDMI OUT of this unit.” message

is displayed on the TV screen and

the input source does not play.

The HDMI IN jack on the TV, which is connected to the HDMI OUT (ARC)

jack on the unit, is not compatible with HDCP 2.2.

Connect the unit to the HDMI IN jack that is compatible with HDCP 2.2 on a

TV.

Menu screen of this unit is not

displayed.

The input switch of TV is not set correctly. Set the TV’s input source to this unit.

A digital or high-frequency

equipment produces noises.

The unit may be placed close to digital equipment or high-frequency

equipment.

Move the equipment away from the unit.

–

The HDMI control function does

not work properly.

“HDMI Control” is set to “Off”. Set “HDMI Control” to “On”. 50

The HDMI control function is disabled on your TV. Refer to the manual supplied with your TV and check the setting. –

The number of the connected HDMI devices exceeds the limit. Disconnect some of the HDMI devices. –

Audio delay control function is

not effective even “Audio Delay”

is set to “Auto”.

The TV does not support the audio delay auto adjustment feature. Adjust timing of sound output manually from “Audio Delay”.

Problem Cause Remedy See page

Cannot make the unit paired with the Bluetooth device.

Receiving/transmitting “Bluetooth” is set to “Off”. Set it to “On”. 56

The device does not support A2DP. Perform paring operations with a device which supports A2DP. 69

The unit and device are too far apart. Position the Bluetooth device so that it is less than 10 m (33 ft) from this unit

and pair the device with this unit.

26, 28

There is a device (microwave oven, wireless LAN, etc.) outputs signals in

the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

–

Another Bluetooth device is connected. Terminate current Bluetooth connection, and perform pairing with the new

device.

Receiving Bluetooth is not selected as the input source. Select Bluetooth as the input source. 21

A Bluetooth adaptor, etc. that you want to pair with the unit has a password

other than “0000”.

Use a Bluetooth adaptor, etc. whose password is “0000”.

Transmitting “Transmission” is set to “Off”. Set it to “On”. 56

Problem Cause Remedy See page

APPENDIX ➤ Troubleshooting En 63

Remote control

Cannot make a Bluetooth connection.

Receiving/transmitting “Bluetooth” is set to “Off”. Set it to “On”. 56

Another Bluetooth device is connected. The unit cannot make multiple Bluetooth connections. Terminate current

Bluetooth connection, and make connection for the desired device.

More than 20 devices are paired and the oldest pairing information is

deleted.

Perform pairing again. The unit can be paired with up to 20 Bluetooth

devices for receiving and transmitting audio. If a new device is successfully

paired with the unit after 20 other devices have already been paired, the

device with the earliest connecting date will have been unpaired to make

room for the new device.

Transmitting Attempted to establish a connection during playback with AirPlay. Terminate AirPlay playback and try again to establish a connection. 29

No sound is produced or the sound is intermittent during playback.

Receiving/transmitting The Bluetooth connection of the unit with the device is disconnected. Perform Bluetooth connection operations again. 27

The unit and device are too far apart. Move the Bluetooth device so that it is less than 10 m (33 ft) from this unit. 26, 28

There is a device (microwave oven, wireless LAN, etc.) outputs signals in

the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

–

The device’s Bluetooth function is off. Enable the Bluetooth function of the device. –

The device’s volume is set to minimum. Turn up the volume level on the device. –

Receiving The device is not set to send Bluetooth audio signals to the unit. Check that the Bluetooth function of the device is set properly. –

Playback on the device has not been performed. Perform playback on the device. –

Transmitting Transmitted audio does not play. Play audio from the device selected with the input selector key. 29

Problem Cause Remedy See page

The remote control does not work

and/or function properly.

The wrong distance or angle. The remote control functions within a maximum range of 6 m (20 ft) and no

more than 30 degrees off-axis from the front panel.

Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is

striking the remote control sensor of this unit.

Reposition this unit.

–

The batteries are weak. Replace all batteries. 4

Problem Cause Remedy See page

APPENDIX ➤ Troubleshooting En 64

Network

Problem Cause Remedy See page

The network feature does not

function.

The network parameters (IP address) have not been obtained properly. Enable the DHCP server function on your router and set “DHCP” in the

setup menu to “On” on the unit. If you want to configure the network

parameters manually, check that you are using an IP address which is not

used by other network devices in your network.

“Not connected” is displayed with

“Wireless (Wi-Fi)” configuration;

unable to connect to wireless

router (access point).

The wireless router’s MAC address filter is enabled. A connection cannot be established if the wireless router’s MAC address

filter is enabled. Check wireless router (access point) settings and try a

different connection method.

30, 31

“Not connected” is displayed with

“Wireless (Wi-Fi)” configuration

using the WPS function (“WPS

Button” and “PIN Code”) and

“Access Point Scan”; unable to

connect to wireless router

(access point).

The wireless router (access point) does not broadcast its SSID. A connection cannot be established if the wireless router (access point) is

configured so that it does not broadcast its SSID. Check wireless router

(access point) settings and try a different connection method.

33, 34, 38

“Not connected” is displayed with

“Wireless (Wi-Fi)” configuration

using the WPS function (“WPS

Button” and “PIN Code”); unable

to connect to wireless router

(access point).

The wireless router (access point) uses WEP encryption. A connection cannot be established using the WPS function. Try a different

connection method.

33, 38

Playback stops unexpectedly and

files cannot be played

continuously.

The folder contains some files that cannot be played via the unit. Delete or move files (including video or hidden files) that cannot be played

via the unit from the folder. –

The unit does not detect the PC. The media sharing setting is not correct. Configure the sharing setting and select the unit as a device to which music

contents are shared.

Some security software installed on your PC is blocking the access of the

unit to your PC.

Check the settings of security software installed on your PC.

–

The unit and PC are not in the same network. Check the network connections and your router settings, and then connect

the unit and the PC to the same network.

–

The MAC address filter is enabled on the unit. In “MAC Address Filter” in the setup menu, disable the MAC address filter

or specify the MAC address of your PC to allow it to access to the unit.

The files in the PC cannot be

viewed or played back.

The files are not supported by the unit or the media server. Use the file format supported by both the unit and the media server.

APPENDIX ➤ Troubleshooting En 65

The Internet radio cannot be

played.

The selected Internet radio station is currently not available. There may be a network problem at the radio station, or the service may

have been stopped. Try the station later or select another station.

–

The selected Internet radio station is currently broadcasting silence. Some Internet radio stations broadcast silence at certain of times of the day.

Try the station later or select another station.

–

Access to the network is restricted by the firewall settings of your network

devices (such as the router).

Check the firewall settings of your network devices. The Internet radio can

be played only when it passes through the port designated by each radio

station. The port number varies depending on the radio station.

–

The dedicated apps for

mobile device does not detect

the unit.

The MAC address filter is enabled on the unit. In “MAC Address Filter” in the setup menu, disable the MAC address filter

or specify the MAC address of your mobile device to allow it to access to

the unit.

The unit and mobile device are not in the same network. Check the network connections and your router settings, and then connect

the unit and mobile device to the same network.

–

Firmware update via the

network (Network Update)

fails.

It may not be possible depending on the condition of the network. Update the firmware via the network (Network Update) again or use a USB

flash drive.

The iPod does not recognize

the unit when using AirPlay.

The unit and iPod/mobile device are connected to different SSIDs on the

same access point.

Connect them to the same SSID.

–

The app installed on a mobile

device does not recognize the

unit.

The unit cannot connect to

the Internet via a wireless

router (access point).

The wireless router (access point) is turned off. Turn on the wireless router (access point). –

The unit and the wireless router (access point) are too far apart. Place the unit and the wireless router (access point) closer to each other. –

There is an obstacle between the unit and the wireless router (access

point).

Move the unit and the wireless router (access point) in a location where

there are no obstacles between them.

–

Wireless network is not

found.

There is a device (microwave oven, wireless LAN, etc.) outputs signals in

the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

–

Access to the network is restricted by the firewall settings of the wireless

router (access point).

Check the firewall setting of the wireless router (access point).

–

Problem Cause Remedy See page

APPENDIX ➤ When surround effect is not enough En 66

The unit achieves its surround sound effects by projecting sound beams which reflect

off walls. The sound beams are not reflected toward to the listening position caused by

furniture, etc., in the path of sound beams, or the room shape. In this case, the sound

may become unbalanced.

If the sound beams are not reflected toward to the listening position (figure 2), you can

adjust for this by installing the optional sound reflection board YRB-100.

• YRB-100 may not be available in some countries or regions.

How to install YRB-100

The unit outputs sound beams according to the “Position” settings (p. 18) as shown in

the following illustrations.

Install the YRB-100 in the path of the sound beam.

shows the recommended install position.

• After installing the sound reflection board, refer to the YRB-100 owner’s manual to

adjust the height and angle. Playing test-tones from “Channel Level” in the setup

menu is recommended when adjusting the board (p. 49).

• By installing the board close to your listening position, you can achieve clear surround

sound positioning.

When surround effect is not enough

Figure 1. Ideal condition Figure 2. Surround right beam is not

being reflected because there

is no wall.

Surround right is quieter than surround

(left), or surround right is in front of its

proper location.

Figure 3. With a sound reflection board

installed

The sound beam for surround right is

reflected correctly, and correct surround

sound effect is achieved.

Note

• This unit does not have the function to automatically adjust sound beam angles. It is not necessary to

adjust the sound beam angles, although the procedure is described in the owner’s manual.

Position: Center

FL: Front left

FR: Front right

SL: Surround left

SR: Surround right

Position: Left Position: Right

APPENDIX ➤ Basic Knowledge of Surround Sound En 67

What is Surround Sound?

Surround sound offers the sense of being surrounded by sounds, an

experience common in concert halls and movie theaters. This can be

achieved by surrounding the audience with numerous speakers from

which sound is output uniformly in all directions. This “surround

sound” technology immerses the listener in sound with speakers

positioned not only in front of the listener, but also behind and to the

sides of the listener, making him or her feel as if they are actually in

the situation.

For precise directional control and quality of sound reproduction,

sounds must be split into separate audio channels for output to each

speaker. Surround sound systems for regular home use (5.1-channel

speaker systems) produce surround sound using five speakers and

a subwoofer, as shown below:

As explained above, sounds can be reproduced for a great sense of

presence by installing multiple speakers. However, this can be

difficult to do in a living room. This unit utilizes “digital sound

projector” technology to provide a realistic and engaging surround

sound experience using only a slim center unit and subwoofer.

What is a Digital Sound Projector?

A digital sound projector separately controls compact speakers

installed in orderly rows, so that optimized audio signals are output

from each speaker and synthesized as highly focused sounds

(sound beams).

When these focused sounds hit a hard wall, they are reflected off of

the wall. A digital sound projector outputs sound beams from five

channels, including front (left/right), center, and surround (left/right)

channels, by reflecting these beams off of walls so that sounds reach

the listener from the appropriate direction. It features a technology

that enables true surround sound without requiring the installation of

speakers in front of, or behind, the listener.

Yamaha’s Audio Technologies

This unit features many more functions based on Yamaha’s superior

audio technologies.

This technology enhances and extends bass and treble, which tend

to be weak in digitally compressed formats such as MP3 used with

portable digital audio players and computers. This makes

compressed audio sound more musically dynamic.

With this unit, Compressed Music Enhancer is automatically

activated when audio is input from a Bluetooth device.

This technology enables precise digital recreation of actual acoustic

environments found in well-known concert halls and movie theaters.

This is achieved using Yamaha’s exclusive sound field programs,

which are based on data measured in various sound fields, and with

which the amplitude, depth, and volume of sounds have been

adjusted.

This technology enables clear playback of speech (dialog,

narrations, etc.) while maintaining the quality of background sound

(music, sound effects, etc.). It enhances the acoustic characteristics

of speech sounds and increases the perceived volume level.

Basic Knowledge of Surround Sound

Typical 5.1 channel speaker system

Front speakers

Subwoofer

Surround speakers

Center

speaker

Digital amplifier

Speaker

Sound beams are emitted

in the target direction

Compressed Music Enhancer

CINEMA DSP

Clear Voice

APPENDIX ➤ Glossary En 68

Audio/video information

Sampling Frequency and Bit Depth

These are values that represent the amount of information used to convert analog signals to digital signals.

They may be expressed as 48kHz/24bit, for example.

• Sampling Frequency

This defines the number of samples per second (sampling a finite set of discrete values in an analog

signal). The higher the sampling rate, the broader the range of frequencies that can be played back.

• Bit Depth

This defines the amplitude value of sounds when quantifying analog signals as finite values. The higher

the bit depth, the deeper sounds are reproduced.

Deep Color

This is a video technology supported by the HDMI standard. It processes RGB or YCbCr signals at bit

depths of 10, 12, or 16 bits per color, whereas conventional formats utilize only 8-bit processing, enabling

reproduction of more colors. Its gamut is comprised of a billion or more colors, while the gamuts of

conventional formats are comprised of only millions of colors or less. This broader gamut results in more

precise reproduction of colors and greater detail in darker portions.

Dolby Digital

This is a compressed audio format for 5.1 channels. It was developed by Dolby Laboratories, and is widely

used with DVD discs.

Dolby Pro Logic II

This technology converts audio signal recorded in 2 channels to 5-channel signal.

DTS Digital Surround

This is a compressed audio format for 5.1 channels developed by DTS. It is widely used with DVD discs.

FLAC

FLAC is a file format for lossless audio data compression. FLAC is inferior to lossy compressed audio

formats in compression rate but provides higher audio quality.

HDMI

High-Definition Multimedia Interface (HDMI) is a digital audio/video interface that has become an industry

standard around the world. It is capable of transmitting both digital video and audio signals intact via a

single cable. It is also compliant with the High-bandwidth Digital Content Protection (HDCP) standard. See

http://www.hdmi.org for more information.

MP3

One of the compressed digital audio format used by MPEG. With psychoacoustic technologies, this

compression method achieves a high compression rate. Reportedly, it is capable of compressing data

quantity by about 1/10 maintaining a certain level of audio quality.

MPEG-4 AAC

An MPEG-4 audio standard. It is used for mobile telephones, portable audio players, and audio streaming

services on Internet because it allows a high compression rate of data while maintaining better audio quality

than MP3.

Pulse Code Modulation (PCM)

This technology records analog audio signals in digital form, converts analog audio signals to digital audio

signals, and transmits analog audio signals in digital form. It is the underlying technology for all digital audio

signal systems, and is widely used with CDs, Blu-ray Discs, and many other types of media as a

uncompressed audio format known as Linear PCM.

WAV

Windows standard audio file format, which defines the method of recording the digital data obtained by

converting audio signals. By default, the PCM method (no compression) is used, but you can also use other

compression methods.

WMA (Windows Media Audio)

One of the compressed digital audio formats developed by Microsoft Corporation. With psychoacoustic

technologies, this compression method achieves a high compression rate. Reportedly, it is capable of

compressing data quantity by about 1/20 maintaining a certain level of audio quality.

x.v.Color

This is a color space supported by HDMI. It has become an international standard for video and offers a

broader gamut than does the sRGB standard for expression of colors never before possible. It expands the

color space while ensuring compatibility with the sRGB standard for more natural and vivid images.

Network information

SSID

SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point.

Wi-Fi

Wi-Fi is a technology that allows an electronic device to exchange data or connect to the Internet wirelessly

using radio waves. Wi-Fi offers the advantage of eliminating the complexity of making connections with

network cables by using wireless connection. Only products that complete Wi-Fi Alliance interoperability

tests can carry the “Wi-Fi Certified” trademark.

WPS

WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy

establishment of a wireless home network.

Glossary

APPENDIX ➤ Specifications En 69

Specifications are subject to change without notice.

Specifications

Item Specifications

Amplifier

Maximum Rated

Output Power

Array speakers 2.5 W x 8

Woofer 30 W x 2

Subwoofer 60 W

Array

speakers

Type Acoustic suspension type

Driver

Full range

2.8 cm (1-1/8") cone magnetic shielding type x 8

Frequency

Response

500 Hz to 21 kHz

Impedance 4 Ω

Woofer

Type Acoustic suspension type

Driver

Full range

4 x 10 cm (1-1/2 x 4") cone non-magnetic shielding type

x 2

Frequency

Response

200 Hz to 23 kHz

Impedance 6 Ω

Subwoofer

Type Bass reflex type

Driver 8.5 cm (3-1/4") cone non-magnetic shielding type x 2

Frequency

Response

45 Hz to 200 Hz

Impedance 6 Ω

Decoder

Supported audio

signal (TV, BD/

DVD)

PCM (5.1ch), Dolby Digital, DTS Digital Surround

Input Jacks

HDMI 1 (HDMI IN)

Digital (Optical) 1 (TV)

Analog

(RCA/stereo)

1 (ANALOG)

Output Jacks

HDMI 1 (HDMI OUT (ARC))

Analog

(RCA/monaural)

1 (SUBWOOFER OUT)

Other Jacks

NETWORK 1 (100BASE-T, 10BASE-T)

UPDATE ONLY 1

Network

Compatible with DLNA ver. 1.5

AirPlay supported

Internet Radio

Wireless LAN

(Wi-Fi)

Wireless LAN

Standards

IEEE802.11b/g/n

Radio Frequency

Band

2.4 GHz

WPS (Wi-Fi

Protected Setup)

Push-Button-Method, PIN Method

Security Type WEP, WPA2-PSK (AES), Mixed Mode

Direct connection with mobile

devices

Wireless Direct

Bluetooth

Bluetooth version Ver. 2.1 +EDR

Supported

protocols

A2DP, AVRCP

Supported codecs

Receiving: SBC, MPEG-4 AAC

Transmitting: SBC

Wireless output Bluetooth Class 2

Maximum

communication

distance

10 m ([33 ft] without obstructions)

Supported content

protection method

SCMS-T (receiving)

General

Power Supply

U.S.A. and Canada models: AC 120 V, 60 Hz

China model: AC 220 V, 50 Hz

Taiwan model: AC 110-120 V, 50/60 Hz

Other models: AC 220-240 V, 50/60 Hz

Power

Consumption

25 W

Standby Power

Consumption

• HDMI Control Off, Network Standby Off............... 0.4 W

• HDMI Control On, Network Standby Off .............. 1.6 W

• HDMI Control Off, Network Standby On

(Wired/Wi-Fi/Wireless direct/Bluetooth)

........................................................... 1.9/1.8/2.0/1.9 W

• HDMI Control On, Network Standby On .............. 3.1 W

Dimensions

(W x H x D)

With antenna: 780 x 146 x 380 mm (30-3/4" x 5-3/4" x 15")

Without antenna: 780 x 77 x 370 mm (30-3/4" x 3" x 14-5/8")

Weight 9.3 kg (20.5 lbs)

APPENDIX ➤ Specifications En 70

Available signal information

❑ Receivable audio signals

• Refer to the supplied instruction manuals of the input source device, and set the device appropriately.

• When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output

depending on the type of the DVD player.

• This unit is not compatible with HDCP-incompatible HDMI or DVI devices. Refer to the supplied instruction

manuals of HDMI or DVI devices for HDCP compatibility.

• To decode audio bitstream signals on this unit, set the input source device appropriately so that the device

outputs the bitstream audio signals directly (does not decode the bitstream signals on the device). Refer to

the supplied instruction manuals for details.

❑ Repeatable video signals

This unit is compatible with the following video signals.

• Deep Color

• x.v.Color

• 3D video signal

This unit is compatible with the following resolutions.

• The resolution of transmitted video signal varies according to specifications of the TV connected to this

unit.

HDMI signal compatibility

Audio signal types Audio signal formats Compatible media

2ch Linear PCM 2ch, 32–192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc.

Multi-ch Linear PCM 6ch, 32–192 kHz, 16/20/24 bit

DVD-Audio, Blu-ray disc, HD DVD,

etc.

Bitstream Dolby Digital, DTS DVD-Video, etc.

•VGA

•480i/60Hz

•480p/60Hz

•576i/50Hz

•576p/50Hz

• 720p/60 Hz, 50 Hz

• 1080i/60 Hz, 50 Hz

• 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz

• 4K/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz

Digital audio signal (optical)

Audio signal types Audio signal formats Compatible media

2ch Linear PCM 2ch, 32–96 kHz, 16/20/24 bit

CD, DVD-Video, DVD-Audio,

etc.

Bitstream Dolby Digital, DTS DVD-Video, etc.

APPENDIX ➤ Specifications En 71

The “ ” logo and “Cinema DSP” are registered

trademarks of Yamaha Corporation.

Manufactured under license from Dolby Laboratories.

Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby

Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under

license from DTS Licensing Limited.

DTS, the Symbol, & DTS and the Symbol together are registered

trademarks, and DTS Digital Surround is a trademark of DTS, Inc.

“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface”

are trademarks, or registered trademarks of HDMI Licensing LLC.

“x.v.Color” is a trademark of Sony Corporation.

The Bluetooth

word mark and logos are registered trademarks

owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha

Corporation is under license.

Bluetooth

Bluetooth is a technology for wireless communication employing the

2.4 GHz frequency band, which can be used without a license.

Handling Bluetooth communications

• The 2.4 GHz band used by Bluetooth compatible devices is a radio

band shared by many types of equipment. While Bluetooth

compatible devices use a technology minimizing the influence of

other components using the same radio band, such influence may

reduce the speed or distance of communications and in some

cases interrupt communications.

• The speed of signal transfer and the distance at which

communications is possible differs according to the distance

between the communicating devices, the presence of obstacles,

radio wave conditions and type of equipment.

• Yamaha does not guarantee all wireless connections between this

unit and devices compatible with Bluetooth function.

iTunes, AirPlay, iPad, iPhone, iPod, and iPod touch are trademarks of

Apple Inc., registered in the U.S. and other countries.

MusicCast is a trademark or registered trademark of Yamaha

Corporation.

DLNA™ and DLNA CERTIFIED™ are trademarks or registered

Unauthorized use is strictly prohibited.

Windows™

Windows is a registered trademark of Microsoft Corporation in the

United States and other countries.

Internet Explorer, Windows Media Audio and Windows Media Player

are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

Android™

Android is a trademark of Google Inc.

The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance.

The Wi-Fi Protected Setup Identifier Mark is a certification mark of

Wi-Fi Alliance.

Wi-Fi, Wi-Fi Alliance, Wi-Fi CERTIFIED, Wi-Fi Protected Setup, WPA

and WPA2 are trademark or registered trademark of Wi-Fi Alliance.

“Blu-ray Disc™”, “Blu-ray™”, and the logos are trademarks of the

Blue-ray Disc Association

Explanations regarding GPL

This product utilizes GPL/LGPL open-source software in some

sections. You have the right to obtain, duplicate, modify, and

redistribute this open-source code only. For information on GPL/

LGPL open source software, how to obtain it, and the GPL/LGPL

license, refer to the Yamaha Corporation website

(http://download.yamaha.com/sourcecodes/musiccast/).

Bluetooth protocol stack (Blue SDK)

APPENDIX ➤ Index En 72

Numerics

2-channel playback 22

3D video 14

4K video 14

5.1-channel 67

Access point scan 34

AirPlay 44

Antenna 9, 13

App HOME THEATER CONTROLLER (WLAN) 6

App MusicCAST CONTROLLER 6

Audio assign 50

Audio information 23

Audio input signal information 52

Audio Return Channel (ARC) 14

Auto power standby 51

Bit depth 68

Bluetooth 25

Bluetooth (receiving audio) 26

Bluetooth (transmitting audio) 28

Bluetooth function (on/off) 56

Brightness of indicators 51

Channel level 49

CINEMA DSP 22

Compressed Music Enhancer 67

Deep Color 68

Default gateway 53, 54

Delay between video and audio output 49

DHCP 30, 54

DLNA 41

DNS server (P) 53, 54

DNS server (S) 53, 54

Dolby Digital 68

Dolby Pro Logic II 68

DTS Digital Surround 68

Dynamic range 49

Encryption method 33, 36, 38, 39

File format (computers/NAS) 41

Firmware update 55, 57

Firmware version 52

HDCP version 2.2 14

HDMI 68

HDMI audio out 50

HDMI cable 14, 15

HDMI control 19, 50

Indicators 7, 8

Information (audio/video/firmware) 52

Initialization 59

Installation position of the unit 18

Internet radio 42

IP address 53, 54

iPod music (AirPlay) 44

iTunes music (AirPlay) 44

Jack cover 9

Language (OSD) 18

MAC address 53

MAC address filter 30, 54

Manual setting (wireless connection) 36

Media sharing setup 41

Menu display 17

Mobile device music 46

MP3 68

MPEG-4 AAC 68

Network information 53

Network name 55

Network standby 55

OSD language 51

Pairing 26, 28

Power cable 9, 16

Pulse Code Modulation (PCM) 68

Reflection board 66

Remote control 4, 10

Remote control sensor 7

Index

APPENDIX ➤ Index En 73

Sampling frequency 68

Security 53

Security key 37, 39

Security software 30

Setup menu 47

Sharing Wi-Fi settings (iOS device) 17, 32

SSID 33, 35, 53, 68

Stereo playback 22

Subnet mask 30, 53

Subwoofer volume 21, 23

Surround mode 22

Surround sound effect 18

Test sounds 49

TV 17, 19, 21

Video input signal information 52

Volume 21

Volume for each channel 23, 49

vTuner 42

vTuner ID 53

Wi-Fi 68

Wired network connections 16, 30

Wireless Direct 39

Wireless network 31

WPS 68

WPS PIN code 38

x.v.Color 68

Yamaha SRT-1500 El manual del propietario

Marca: Yamaha

Modelo: SRT-1500

Tipo: El manual del propietario

Descargar PDF

informe

En otros idiomas

français: Yamaha SRT-1500 Le manuel du propriétaire
italiano: Yamaha SRT-1500 Manuale del proprietario
English: Yamaha SRT-1500 Owner's manual
Deutsch: Yamaha SRT-1500 Bedienungsanleitung
русский: Yamaha SRT-1500 Инструкция по применению
Nederlands: Yamaha SRT-1500 de handleiding
dansk: Yamaha SRT-1500 Brugervejledning
svenska: Yamaha SRT-1500 Bruksanvisning
Türkçe: Yamaha SRT-1500 El kitabı

Yamaha SRT-1500 El manual del propietario

Yamaha SRT-1500 El manual del propietario

En otros idiomas

Documentos relacionados

Otros documentos