Vornado Fan EH1004144 Manual de usuario

Categoría
Calentadores espaciales
Tipo
Manual de usuario
MODEL iCONTROL
READ AND SAVE THESE IMPORTANT INSTRUCTIONS
Whole Room Heater Owner’s Guide
LEA Y TENGA EN CUENTA ESTAS INSTRUCCIONES IMPORTANTES
Guía del propietario el calentador para ambientes
www.vornado.com
3
English
TRUST
It is said that trust isn’t given, but earned. For decades Vornado
has been earning the trust of our customers by offering them only
the best. Vornado provides the highest level of performance,
coupled with the highest level of support available. Complete
satisfaction with no exceptions – this is Vornado’s promise to you.
If you are not satisfied for any reason, please contact us.
Knowledgeable representatives are available at 1-800-234-0604
from 8:00 AM to 5:00 PM CST. A wealth of additional support is
also available online at www.vornado.com. On behalf of myself
and the entire staff at our Andover, Kansas headquarters – thank
you for selecting Vornado.
Sincerely,
Bill Phillips
CEO, Vornado Air
LEADERS IN AIRFLOW TECHNOLOGY
Products and support are available online at www.vornado.com
Ordinary heaters provide only localized heat. Heat immediately rises
to the ceiling, resulting in cold and hot spots in the room. Vornado’s
unique Vortex Action delivers continuous, uniform heat surrounding
everyone in the room in a warm, comfortable temperature.
VORNADO
®
VORTEX ACTION
Designed, engineered and supported in Andover, Kansas.
Diseño y soporte en Andover, Kansas.
Questions or comments?
¿
Prequntas o comentarios?
www.vornado.com
800.234.0604
Ordinary Heater
Without Adequate
Heat Circulation
Vornado Whole
Room Heater
With Signature
Vortex Heat
Circulation
OFF OFF OFF
ON ON
OFF OFF OFF
ON ON
72º
72º
62º
72º
82º
82º
82º
iCONTROL
FLIPPI
WHOLE ROOM
HEATERS
WHOLE ROOM
AIR CIRCULATORS
ZIPPI
WHOLE ROOM
HUMIDIFIERS
TOWER
CIRCULATORS
English
English
Do not operate this heater on an elevated surface such as a shelf or
desktop. Use only while placed on the floor.
This heater is equipped with a thermal safety shut-off system, designed
to turn off the heater when an internal overheating condition is
detected (see How To Use “RESETTING YOUR VORNADO HEATER,” to
determine how to check and reset the heater).
Do not operate this product with any electronic speed-control device on
the same circuit.
Do not use heater to dry human or animal hair/fur or articles of clothing.
This heater operates with an infrared remote control. Interference
between this remote and other remote-control-operated electrical
appliances in your home is possible.
This product is equipped with a 3-prong plug, with a grounding pin as a
safety feature. To reduce the risk of electric shock, this plug is intended
to connect to properly grounded outlets only. This plug will fit into a
grounded outlet only one way. Do not alter the plug. Do not attempt to
defeat this safety purpose of the grounding plug.
This product must be grounded. If the product malfunctions, grounding
provides a path of least resistance for the electric current to reduce
the risk of electric shock. The 3-prong plug must be inserted into a
grounded outlet that has been properly installed in accordance with all
electric codes and ordinances. If you are in doubt as to whether or not
an outlet is properly grounded, contact a qualified electrician.
This heater is for use on 120 volts. The cord has a plug as shown at A
in Figure 65.1. An adapter as shown at C is available for connecting
three-blade grounding-type plugs to two-slot receptacles. The green
grounding lug extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box. The adapter
should not be used if a three-slot grounded receptacle is available.
4 5
Read all instructions before using this heater.
This heater is hot when in use. To avoid burns, do not let bare skin touch
hot surfaces. Use handles when moving this heater. Keep combustible
materials, such as furniture, pillows, bedding, papers, clothes, and
curtains at least 3 feet (0.9 m) from the front of the heater and keep
them away from the sides and rear.
Extreme caution is necessary when any heater is used by or near
children or invalids and whenever the heater is left operating and
unattended.
Always unplug heater when not in use.
Do not operate any heater with a damaged cord or plug or after the
heater malfunctions, has been dropped or damaged in any manner.
Discard heater, or return to authorized service facility for examination
and/or repair.
Do not use outdoors.
This heater is not intended for use in bathrooms, laundry areas and
similar indoor locations. Never locate heater where it may fall into a
bathtub or other water container.
Do not run cord under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic area and where it will not be
tripped over.
To disconnect heater, turn controls to off, then remove plug from outlet.
Connect to properly grounded outlets only.
Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or damage
the heater.
To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do
not use on soft surfaces, like a bed, where openings may become
blocked.
A heater has hot and arcing or sparking parts inside. Do not use it in
areas where gasoline, paint, or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or
injury to persons.
Always plug heaters directly into a wall outlet/receptacle. Never use with
an extension cord or relocatable power tap (outlet/power strip). Operate
this heater only in its upright position.
IMPORTANT INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS HEATER. SAVE THESE INTRUCTIONS.
Please visually inspect all internal and external components before connecting to electric current. If any damage
is found, DO NOT USE THIS UNIT and contact Vornado Air LLC at 1-800-234-0604.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the following:
SAVE THESE INSTRUCTIONS
Figure 65.1
English
English
76
HOW TO USE
Using your Vornado Heater is easy. Just follow these simple steps.
Position your heater so the vortex beam of warm air is directed
across the room unobstructed. Position it in a location that
is representative of the room temperature. Avoid areas of
temperature extremes such as cold drafts and heat registers.
Please refer to IMPORTANT INSTRUCTIONS at the beginning
of this owner’s guide.
Plug into a standard grounded wall outlet.
Press the POWER button.
ONE-KNOB OPERATION
This innovative user interface is sophisticated yet simple. Press
the knob to “wake-up” or turn on the screen on the base unit,
rotate the One-Knob control unit until the desired mode you
want to adjust is displayed. Press the button to accept this mode,
then, rotate the knob left or right to select desired setting. The
unit is then set, or you may press the One-Knob again to adjust
another mode, and continue to adjust additional settings in the
same manor.
REMOTE CONTROL
Fully control the Heater remotely with the Remote, no more
getting up to adjust the temperature. You can turn the unit ON
and OFF, switch the mode from FAN ONLY, to LOW HEAT or HIGH
HEAT, adjust the desired set temperature up or down, and set the
automatic-off timer. As you adjust the remote, the base unit will
“beep” to indicate that it has received your signal.
CARE & MAINTENANCE
Your heater has no user serviceable parts. Do not disassemble the
unit – it will void your warranty. If service is required, return your
heater to Vornado (see Warranty section).
The motor is permanently lubricated and requires no oiling.
Because your heater moves a substantial amount of air, it will
require regular cleaning. Be sure to unplug the unit prior to any
cleaning activity.
Use a vacuum cleaner with the brush attachment to clean any
accumulated dust on the front grill and the side air inlets. During
the off-season or extended periods of non-use, store your heater.
Unplug the unit and bundle the cord. Save the plastic bag the
heater was shipped in so you can cover the unit and minimize
settling dust.
1.
2.
3.
4.
5.
iCONTROL OPERATING CONTROLS
1
2
3
4
6
5
7
POWER ON/OFF
Front light illuminates when power is on.
MODE
HIGH HEAT 1500 watts, LOW HEAT 750 watts, or FAN ONLY.
TEMPERATURE
Allows you to select your desired comfort level. Use the UP arrow
to raise the set temperature. Use the DOWN arrow to lower the set
temperature.
TIMER
The timer can be set in hour intervals up to 9 hours. Press the TIMER
button to go into timer mode. In timer mode, use the UP arrow to
add hours. In timer mode, use the DOWN arrow to remove hours.
REMOTE
The remote control functions the same as the unit
controls. The remote requires 2 AAA batteries. To
replace the batteries remove the cover located on the
bottom side of the remote.
SOUND
When a setting is changed you will hear a “beep”
from the unit.
LCD DISPLAY
Dims for no-glow night operation.
English
9
ADVANCED SAFETY FEATURES
OPERATING TIPS
In smaller areas, you might prefer to set the unit in LOW mode. A
vortex beam of air will gently keep the air circulating in the room for
even, uniform heating.
In larger spaces, you might prefer to set the unit in HIGH mode. A
vortex beam of air will gently keep the air circulating in the room for
even, uniform heating.
To use the iControl as a personal fan, set the unit to FAN mode.
The iControl, like any other 1500-watt electric heater, draws up to
12.5 amps of electric current. If using your iControl on HIGH setting
causes your home circuit breaker or fuse to trip, we offer the following
suggestions:
Try turning off other electrical appliances that run on the same circuit
as your heater.
Run your heater in LOW mode.
Have your electrician add an additional circuit to your home’s
electrical system.
When the room temperature is higher than the set temperature it is
normal and correct to have little to no heat coming out of the iControl.
When the unit is first turned on there is a slight delay before heat will
start to be produced.
ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR
ANY ELECTRICAL APPLIANCE.
RESETTING YOUR VORNADO HEATER
Your Vornado Heater has a multi-level safety shut-off system designed to prevent overheating. Overheating may occur when the inlets or
outlet are blocked, a foreign object prevents the blade from turning, or the appliance tips over. If this happens, the safety shut-off system
will cut power to the heat element and you will need to manually reset the heater.
Set the POWER switch to OFF and unplug the unit.
Remove any obstructions.
Wait 5–10 minutes, allowing the unit to cool down.
Plug in the unit and place in desired position.
Set the POWER switch to ON. Your Vornado Heater should now function normally.
If the safety shut-off system repeatedly shuts off your heater or if it will not reset after following the above procedure, DO NOT ATTEMPT
TO DISASSEMBLE THE UNIT. Call Vornado Consumer Services Department toll-free at 1-800-234-0604.
GROUNDED HEAVY-DUTY POWER CORD
Adds durability and a more secure wall connection.
1.
2.
3.
4.
5.
6.
TIGHT GRILL SPIRALS
Resists curious fingers.
COOL TOUCH CASE
Safe to touch, even on high heat setting.
AUTOMATIC SAFETY SHUT OFF SYSTEM
If airflow becomes blocked and overheating occurs,
power to the heating element and fan is shut off.
TIP-OVER SWITCH PROTECTION
If tipped over, power to the heating element and fan
motor is reduced to prevent overheating.
IDEAL 120°F EXIT AIR TEMPERATURE
Warm enough to heat an entire room.
English8
English 11
Español
CONFIANZA
Se dice que la confianza no se regala, sino que se gana. Durante
décadas Vornado se ha ganado la confianza de nuestros clientes
ofreciéndoles sólo lo mejor. Vornado brinda el mayor nivel de
rendimiento combinado con el mayor nivel de soporte disponible.
Satisfacción total sin excepciones; esta es la promesa que le realiza
Vornado. Si usted no está satisfecho por algún motivo, por favor
contáctenos. En el 1-800-234-0604 de 8:00 AM a 5:00 PM CST
encontrará representantes expertos. En www.vornado.com
también encontrará abundante soporte adicional disponible.
En nombre mío y de todo el personal de nuestra sede de Andover,
Kansas le agradecemos por elegir Vornado.
Cordialmente,
Bill Phillips
CEO, Vornado Air
LEADERS IN AIRFLOW TECHNOLOGY
Los productos y el soporte están disponibles en www.vornado.com
Los calefactores comunes ya que sólo proporcionan un calor localizado.
El calor sube al techo en forma inmediata y ello genera focos de frío y calor
en el ambiente. La exclusiva Acción Vórtice de Vornado genera un calor
continuo y uniforme envolviendo a las personas que se encuentran en el
ambiente en una temperatura cálida y confortable.
CIRCULACION VORTICE VORNADO
FLIPPI
CALEFACTOR PARA TODA
LA HABITACION
CIRCULADOR DE AIRE PARA
TODA LA HABITACION
ZIPPI
HUMIDIFICADOR PARA
TODA LA HABITACION
Calefactor
Tradicional
Sin circulación
de calor adecuada
Calentador Para
Ambientes
Vornado
Con circulación
vórtice de
calor de diseño
exclusivo
OFF OFF OFF
ON ON
OFF OFF OFF
ON ON
72º
72º
62º
72º
82º
82º
82º
VORNADO AIR LLC
5-YEAR LIMITED WARRANTY
Vornado Air LLC (“Vornado”) warrants to the original consumer or
purchaser that this iControl heater (“Product”) is free from defects in
material or workmanship for a period of five (5) years from the date of
purchase. If any such defect is discovered within the warranty period,
Vornado, at its discretion, will repair or replace the Product at no cost if the
Product is returned to Vornado postage-paid. Repairs not covered by the
warranty or outside the warranty period will require a fee to cover the cost of
materials, handling and shipping.
This warranty does not apply to defects resulting from abuse of the
Product, modification, alteration, repair or service of the Product by
anyone other than Vornado, mishandling, improper maintenance,
commercial use of the Product, damages which occur in shipment or are
attributed to acts of God.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
THE EXCLUSIVE REMEDY OF THE CONSUMER. VORNADO SHALL
NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS
LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long an implied
warranty lasts, so the above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights, and you may have
other rights that vary from state to state.
For warranty or repair service, call 1-800-234-0604 or email
[email protected] to obtain a Return Authorization
(“RA”) form. Please have or include your Product’s model number and
serial number, as well as your name, address, city, state, zip code and
phone number when contacting Vornado for warranty service. You may
be required to provide the original sales receipt. For your records:
Staple or attach your original sales receipt to this Owner’s Guide. Please also
write your Product’s serial number below (located on product specs decal).
Serial No.______________________________________
After receiving the RA form, ship your Product to:
Vornado Air LLC
Attn: Warranty & Repair
415 E. 13th Street
Andover, KS 67002
To assure proper handling, packages must be clearly marked with the RA
number. Packages not clearly marked with the RA number may be refused at the
receiving dock.
Please allow 1-2 weeks for repair and return of your Product after the
Product is received.
Product registration available online at www.vornado.com.
© 2011 Vornado Air LLC Andover, KS 67002
Specifications subject to change without notice. Vornado® is a trademark owned
by Vornado Air LLC. Designed, engineered and assembled in the U.S.A.
VORNADO CONSUMER SERVICES
10
www.vornado.com
800.234.0604
iCONTROL
CIRCULADORES
DE AIRE TOWER
Do not operate this heater on an elevated surface such as a shelf or
desktop. Use only while placed on the floor.
This heater is equipped with a thermal safety shut-off system, designed
to turn off the heater when an internal overheating condition is
detected (see How To Use “RESETTING YOUR VORNADO HEATER,” to
determine how to check and reset the heater).
Do not operate this product with any electronic speed-control device on
the same circuit.
Do not use heater to dry human or animal hair/fur or articles of clothing.
This heater operates with an infrared remote control. Interference
between this remote and other remote-control-operated electrical
appliances in your home is possible.
This product is equipped with a 3-prong plug, with a grounding pin as a
safety feature. To reduce the risk of electric shock, this plug is intended
to connect to properly grounded outlets only. This plug will fit into a
grounded outlet only one way. Do not alter the plug. Do not attempt to
defeat this safety purpose of the grounding plug.
This product must be grounded. If the product malfunctions, grounding
provides a path of least resistance for the electric current to reduce
the risk of electric shock. The 3-prong plug must be inserted into a
grounded outlet that has been properly installed in accordance with all
electric codes and ordinances. If you are in doubt as to whether or not
an outlet is properly grounded, contact a qualified electrician.
This heater is for use on 120 volts. The cord has a plug as shown at A
in Figure 65.1. An adapter as shown at C is available for connecting
three-blade grounding-type plugs to two-slot receptacles. The green
grounding lug extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box. The adapter
should not be used if a three-slot grounded receptacle is available.
Read all instructions before using this heater.
This heater is hot when in use. To avoid burns, do not let bare skin touch
hot surfaces. Use handles when moving this heater. Keep combustible
materials, such as furniture, pillows, bedding, papers, clothes, and
curtains at least 3 feet (0.9 m) from the front of the heater and keep
them away from the sides and rear.
Extreme caution is necessary when any heater is used by or near
children or invalids and whenever the heater is left operating and
unattended.
Always unplug heater when not in use.
Do not operate any heater with a damaged cord or plug or after the
heater malfunctions, has been dropped or damaged in any manner.
Discard heater, or return to authorized service facility for examination
and/or repair.
Do not use outdoors.
This heater is not intended for use in bathrooms, laundry areas and
similar indoor locations. Never locate heater where it may fall into a
bathtub or other water container.
Do not run cord under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic area and where it will not be
tripped over.
To disconnect heater, turn controls to off, then remove plug from outlet.
Connect to properly grounded outlets only.
Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or damage
the heater.
To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do
not use on soft surfaces, like a bed, where openings may become
blocked.
A heater has hot and arcing or sparking parts inside. Do not use it in
areas where gasoline, paint, or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or
injury to persons.
Always plug heaters directly into a wall outlet/receptacle. Never use with
an extension cord or relocatable power tap (outlet/power strip). Operate
this heater only in its upright position.
INSTRUCCIONES IMPORTANTES
LEA TODAS LAS INSTRUCCIONES ANTES DE USAR ESTE CALEFACTOR.
Please visually inspect all internal and external components before connecting to electric current. If any damage
is found, DO NOT USE THIS UNIT and contact Vornado Air LLC at 1-800-234-0604.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the following:
GUARDE ESTAS
INSTRUCCIONES
Figure 65.1
Español12 13
Español
HOW TO USE
Using your Vornado Heater is easy. Just follow these simple steps.
Position your heater so the vortex beam of warm air is directed
across the room unobstructed. Position it in a location that
is representative of the room temperature. Avoid areas of
temperature extremes such as cold drafts and heat registers.
Please refer to IMPORTANT INSTRUCTIONS at the beginning
of this owner’s guide.
Plug into a standard grounded wall outlet.
Press the POWER button.
ONE-KNOB OPERATION
This innovative user interface is sophisticated yet simple. Press
the knob to “wake-up” or turn on the screen on the base unit,
rotate the One-Knob control unit until the desired mode you
want to adjust is displayed. Press the button to accept this mode,
then, rotate the knob left or right to select desired setting. The
unit is then set, or you may press the One-Knob again to adjust
another mode, and continue to adjust additional settings in the
same manor.
REMOTE CONTROL
Fully control the Heater remotely with the Remote, no more
getting up to adjust the temperature. You can turn the unit ON
and OFF, switch the mode from FAN ONLY, to LOW HEAT or HIGH
HEAT, adjust the desired set temperature up or down, and set the
automatic-off timer. As you adjust the remote, the base unit will
“beep” to indicate that it has received your signal.
CARE & MAINTENANCE
Your heater has no user serviceable parts. Do not disassemble the
unit – it will void your warranty. If service is required, return your
heater to Vornado (see Warranty section).
The motor is permanently lubricated and requires no oiling.
Because your heater moves a substantial amount of air, it will
require regular cleaning. Be sure to unplug the unit prior to any
cleaning activity.
Use a vacuum cleaner with the brush attachment to clean any
accumulated dust on the front grill and the side air inlets. During
the off-season or extended periods of non-use, store your heater.
Unplug the unit and bundle the cord. Save the plastic bag the
heater was shipped in so you can cover the unit and minimize
settling dust.
1.
2.
3.
4.
5.
iCONTROL OPERATING CONTROLS
1
2
3
4
6
5
7
POWER ON/OFF
Front light illuminates when power is on.
MODE
HIGH HEAT 1500 watts, LOW HEAT 750 watts, or FAN ONLY.
TEMPERATURE
Allows you to select your desired comfort level. Use the UP arrow
to raise the set temperature. Use the DOWN arrow to lower the set
temperature.
TIMER
The timer can be set in hour intervals up to 9 hours. Press the TIMER
button to go into timer mode. In timer mode, use the UP arrow to
add hours. In timer mode, use the DOWN arrow to remove hours.
REMOTE
The remote control functions the same as the unit
controls. The remote requires 2 AAA batteries. To
replace the batteries remove the cover located on the
bottom side of the remote.
SOUND
When a setting is changed you will hear a “beep”
from the unit.
LCD DISPLAY
Dims for no-glow night operation.
Español14 15
Español
ADVANCED SAFETY FEATURES
OPERATING TIPS
In smaller areas, you might prefer to set the unit in LOW mode. A
vortex beam of air will gently keep the air circulating in the room for
even, uniform heating.
In larger spaces, you might prefer to set the unit in HIGH mode. A
vortex beam of air will gently keep the air circulating in the room for
even, uniform heating.
To use the iControl as a personal fan, set the unit to FAN mode.
The iControl, like any other 1500-watt electric heater, draws up to
12.5 amps of electric current. If using your iControl on HIGH setting
causes your home circuit breaker or fuse to trip, we offer the following
suggestions:
Try turning off other electrical appliances that run on the same circuit
as your heater.
Run your heater in LOW mode.
Have your electrician add an additional circuit to your home’s
electrical system.
When the room temperature is higher than the set temperature it is
normal and correct to have little to no heat coming out of the iControl.
When the unit is first turned on there is a slight delay before heat will
start to be produced.
ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR
ANY ELECTRICAL APPLIANCE.
RESETTING YOUR VORNADO HEATER
Your Vornado Heater has a multi-level safety shut-off system designed to prevent overheating. Overheating may occur when the inlets or
outlet are blocked, a foreign object prevents the blade from turning, or the appliance tips over. If this happens, the safety shut-off system
will cut power to the heat element and you will need to manually reset the heater.
Set the POWER switch to OFF and unplug the unit.
Remove any obstructions.
Wait 5–10 minutes, allowing the unit to cool down.
Plug in the unit and place in desired position.
Set the POWER switch to ON. Your Vornado Heater should now function normally.
If the safety shut-off system repeatedly shuts off your heater or if it will not reset after following the above procedure, DO NOT ATTEMPT
TO DISASSEMBLE THE UNIT. Call Vornado Consumer Services Department toll-free at 1-800-234-0604.
GROUNDED HEAVY-DUTY POWER CORD
Adds durability and a more secure wall connection.
1.
2.
3.
4.
5.
6.
TIGHT GRILL SPIRALS
Resists curious fingers.
COOL TOUCH CASE
Safe to touch, even on high heat setting.
AUTOMATIC SAFETY SHUT OFF SYSTEM
If airflow becomes blocked and overheating occurs,
power to the heating element and fan is shut off.
TIP-OVER SWITCH PROTECTION
If tipped over, power to the heating element and fan
motor is reduced to prevent overheating.
IDEAL 120°F EXIT AIR TEMPERATURE
Warm enough to heat an entire room.
Español16 17
Español
Español
19Español
VORNADO AIR LLC
GARANTÍA LIMITADA DE 5 AÑOS
Vornado Air LLC, (“Vornado”) garantiza al comprador o consumidor
original que este calefactor el iCONTROL (“Producto”) contra defectos de
material o mano de obra durante un período de cinco (5) años a partir de
la fecha de compra. Si se descubriera cualquiera de estos defectos dentro
del período de garantía, Vornado reparará o reemplazará el Producto, a su
discreción, sin costo alguno, en tanto el Producto se remita a Vornado con los
gastos de envío pagos. Las reparaciones no cubiertas por la garantía o fuera
del período de garantía requerirán de un pago cubriendo el costo de
materiales, manipuleo y envío.
Esta garantía no se aplica a defectos producidos por el abuso del
Producto, por su modificación, alteración, reparación o mantenimiento
por personas ajenas a Vornado, por mal manejo del mismo,
mantenimiento inadecuado, uso comercial o daños producidos durante
el envío o atribuibles a fuerza mayor.
LA REPARACIÓN O REEMPLAZO QUE SE OFRECE BAJO ESTA
GARANTÍA ES LA ÚNICA SOLUCIÓN PROPORCIONADA PARA EL
CLIENTE. VORNADO NO SERÁ RESPONSABLE POR NINGÚN DAÑO
INCIDENTAL O INDIRECTO POR EL INCUMPLIMIENTO DE CUALQUIER
GARANTÍA EXPRESA O IMPLÍCITA DE ESTE PRODUCTO. EXCEPTO
HASTA EL ALCANCE PROHIBIDO POR LAS LEYES VIGENTES, TODA
GARANTÍA IMPLÍCITA DE APTITUD O IDONEIDAD PARA UN USO EN
PARTICULAR DE ESTE PRODUCTO QUEDA LIMITADA A LA DURACIÓN
DE ESTA GARANTÍA.
Algunos estados no permiten limitaciones con respecto a cuánto dura
una garantía implícita o la exclusión o limitación de daños imprevistos
o consiguientes, por lo tanto las exclusiones o limitaciones anteriores
pueden no aplicarse en su caso. Esta garantía le otorga derechos legales
específicos; usted puede también tener otros derechos, los que varían
de estado a estado.
Por garantía o servicio de reparaciones, llame al 1-800-234-0604 o mande un
correo electrónico a [email protected] paraobtener el formulario
de Autorización de Retorno (“RA”). Por favor, cuando contacte a Vornado por la
garantía, tenga a mano o incluya en el envío los números de modelo, código de
fecha y de serie de su Producto, así como su nombre, dirección, ciudad, estado,
código postal y número de teléfono. Es posible que se le requiera proporcionar
el recibo original de venta. Para sus registros: Abroche o
adjunte su recibo original de compra a esta ‘Guía del Usuario’. Por favor, también
escriba aquí abajo el número de serie de su Producto (ubicado en la calcomanía
de especificaciones de su producto).
Numero de Serie:______________________________________
Después de recibir el formulario RA, despache su Producto con gastos
de envío pagos a:
Vornado Air LLC
Attn: Warranty & Repair
415 E. 13th Street
Andover, KS 67002
Para asegurar el manejo adecuado, los embalajes deben estar claramente
marcados con el número de RA. Los paquetes que no estén marcados
claramente con dicho número de RA podrían ser rechazados en la dársena de
recepción.
Por favor espere entre 1 y 2 semanas después de la recepción del Producto para
dar tiempo a la reparación y devolución del mismo.
Registre su producto en www.vornado.com
© 2011 Vornado Air LLC • Andover, KS 67002
Especificaciones del producto sujetas a cambio sin previo aviso.
Vornado® son marcas registradas de Vornado Air LLC.
Montaje y diseño realizado en Andover, Kansas.
18
www.vornado.com
800.234.0604
SERVICIOS AL CONSUMIDOR DE VORNADO
CL3-0156 RA
CL7-0156 RA, V01
Vornado Air, LLC
415 East 13th Street, Andover, Kansas 67002
800.234.0604 | www.vornado.com
Speak your mind www.vornado.com/reviews
Hable con franqueza www.vornado.com/reviews
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Vornado Fan EH1004144 Manual de usuario

Categoría
Calentadores espaciales
Tipo
Manual de usuario

En otros idiomas