Philips DVP2902/F7 Manual de usuario

Categoría
Reproductores de DVD
Tipo
Manual de usuario
DVP2902
DVD Player
Register your product and get support at
www.philips.com/welcome
User Manual
For further assistance, call the customer
support service in your country.
To obtain assistance, contact Philips Customer
Care Center;
In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin
Islands; 1- 866-515-1124
2
Included accessories
Contents
Connecting to RF modulator (not included)
PRECAUTIONS
IMPORTANT SAFETY INSTRUCTIONS ......................................................... 3
About the discs ....................................................................................................... 6
Playable discs .................................................................................................. 6
Unplayable discs ............................................................................................ 6
SETUP
Connections .............................................................................................................. 7
Rear terminals ................................................................................................... 7
Connection to a TV ........................................................................................ 8
Connection to an audio system ............................................................ 9
HDMI audio ....................................................................................................... 9
HDMI mode and actual output signals .............................................. 9
About the remote control ................................................................................. 10
Remote control ............................................................................................... 10
Installing the batteries for the remote control .............................. 10
DVD FUNCTIONS
Playback ................................................................................................................... 11
JPEG playback ..................................................................................................... 12
Search functions ................................................................................................... 12
Using track / file search ............................................................................. 12
Using title / chapter search ...................................................................... 12
Using time search .......................................................................................... 12
On-screen display ............................................................................................... 13
Repeat / random playback ............................................................................. 14
Repeat playback ............................................................................................ 14
Repeat A-B playback ................................................................................. 14
Random playback ........................................................................................ 14
Special settings ..................................................................................................... 15
Subtitle language .......................................................................................... 15
Audio language .............................................................................................. 15
Camera angles ................................................................................................ 15
DVD settings .......................................................................................................... 16
System Settings .............................................................................................. 17
Language settings ......................................................................................... 18
Audio settings .................................................................................................. 19
Video settings ................................................................................................. 20
Preference settings ...................................................................................... 21
INFORMATION
Troubleshooting guide ..................................................................................... 22
Specifications ....................................................................................................... 22
LIMITED WARRANTY ........................................................................................ 23
Español .................................................................................................................... 24
GARANTÍA LIMITADA ....................................................................................... 25
Remote control (NC091UL)
Audio / video cables
Quick Start Guide
Note(s):
RF modulator is not included with this unit. You need to
purchase it at your local store.
The quality of picture may become poor if this unit is
connected to an RF modulator.
If your TV has “Antenna In (RF in)” jack only, it is still
possible to connect this unit to your TV by using an RF
modulator.
In this case, follow the instructions below.
1) Disconnect the Power cords of the devices from the
AC outlet.
2) Make the Connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to
either 3 or 4, whichever the TV channel is least
used in your area. If your RF modulator has a
modulator / antenna switch, set it according to the
manual included with the RF modulator.
4) Plug in the Power cords of the devices to an AC outlet.
5) Turn On your TV and choose the same channel as
you set to the RF modulator’s channel 3/4 switch
to. For more details, follow the manual included with
the RF modulator.
or
AUDIO
OUT
L
R
VIDEO
OUT
HDMI OUT
HDMI OU
T
Video cable
Rear of TV
RF coaxial cable
RF coaxial
cable
Set channel 3 or 4
Cable TV
company
VHF / UHF
antenna
Rear of your RF
modulator
Audio cable
Rear of this unit
If your TV only has an antenna input
(no A/ V inputs), you will need an
RF modulator (not included) to
connect this player.
RF modulator
TV
No antenna (RF) output!
PRECAUTIONS
3
EN
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments / accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the
cart / apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio / TV technician for help.
Continued on next page.
The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference.
Serial No.:
Model No.:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The important note and rating are located on the rear or
bottom of the cabinet.
The symbol for CLASS ll (Double Insulation)
IMPORTANT SAFETY INSTRUCTIONS
4
EN
Disconnect the mains(AC) plug to shut off when find trouble or not in use. The mains(AC) plug shall remain readily
operable.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire
or the like.
LASER SAFETY
This apparatus is classified as a CLASS 1 LASER PRODUCT.
This apparatus employs a laser. Only a qualified service person should remove the cover or
attempt to service this apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This item incorporates
copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi
Corporation. Reverse engineering and disassembly are prohibited.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
In order to avoid interruption of ventilation, this unit should not be placed in built-in equipment such as a
book cabinet, rack, etc., and the vents of this unit should not be covered with anything such as a tablecloth,
curtain, newspaper, etc. Make sure to leave a space of 4.0 inches (10cm) or more around this apparatus.
When installing this unit in a temperate environment, avoid a place with rapid temperature changes.
This unit should not be used in a tropical environment as it has not been evaluated under such conditions.
No objects should be placed directly on or under this unit, especially lighted candles or other flaming objects.
Never use a gas duster on this unit.
The gas trapped inside of this unit may cause ignition and explosion.
To avoid the hazards of electrical shock and fire
Do not handle the AC power cord with wet hands.
Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.
Do not put your fingers or objects into the unit.
Location and handling
Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
Avoid a place with drastic temperature changes.
Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and / or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew condensation warning
Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
The unit is moved from a cold place to a warm place.
Under conditions of high humidity.
After heating a cold room.
Note about recycling
This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
For product recycling information, please visit - www.recycle.philips.com
Notice for progressive scan output
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output.
Disposal of used batteries
In certain localities, disposing batteries with household waste is not permitted. Please ensure you dispose of batteries
according to local regulations.
5
EN
TRADEMARK INFORMATION
The terms HDMI and HDMI
High-Definition Multimedia
Interface, and the HDMI Logo
are trademarks or registered
trademarks of HDMI Licensing
LLC in the United States and
other countries.
AUDIO
Manufactured under license
from Dolby Laboratories. Dolby,
Dolby Audio, and the double-D
symbol are trademarks of Dolby
Laboratories.
ENERGY STAR® is a joint program of the
U.S. Environmental Protection Agency
and the U.S. Department of Energy
helping us all save money and protect
the environment through energy efficient
products and practices.
is a trademark of DVD Format / Logo
Licensing Corporation.
SYMBOLS USED IN THIS MANUAL
The following symbols appear in some headings in this manual.
[DVD]
: Description refers to DVD-video.
[CD]
: Description refers to audio CD.
[JPEG]
: Description refers to DVD, CD-RW/-R with JPEG
files.
MAINTENANCE
Servicing
Please refer to relevant topics on the “Troubleshooting
guide” on page 22. If you cannot find any solution there,
our service center is pleased to assist you.
Even if this unit becomes inoperative, Do not open
the cabinet to repair it by yourself. There are no user-
serviceable parts inside.
Turn off the unit, unplug the AC power plug and then call
our support center mentioned on the front page.
Before calling, please check model and serial number on
the unit.
Cleaning the cabinet
Wipe the front panel and other exterior surfaces of the unit
with a soft cloth.
Never use a solvent, thinner, benzene or alcohol to clean
the unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the
unit.
Cleaning discs
When a disc is dirty, clean it with a cleaning cloth. Wipe the
disc from the center to the outside. Do not wipe in a circular
motion.
Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
Cleaning the disc lens
Depends on unit circumstances, the laser optical pickup unit’s
disc lens may get dirty.
If this unit still does not perform properly although you refer
to the relevant sections and to “Troubleshooting guide” in this
owner’s manual, consult a local dealer or an authorized service
center for inspection and cleaning of the disc lens.
Disc handling
When you handle a disc, hold it by its edge and try not to
touch the surface of the disc.
Always store the disc in its protective case when not in use.
6
EN
About the discs
Playable discs
Type of
media
Mark (logos)
Region
codes
Recorded
signals
Disc sizes Disc types
DVD-video
*1, 2, 4, 6, 8
or
digital video
(MPEG2)
5 inches
(12 cm)
or
3 inches
(8 cm)
e.g.)
title 1 title 2
chapter 1 chapter 2 chapter 1
chapter 2
chapter 3 chapter 4
DVD-RW
DVD-R
*1, 3, 4, 5,
6, 7, 8
digital video
(MPEG2)
or JPEG
e.g.)
title 1 title 2
chapter 1 chapter 2 chapter 1
chapter 2
chapter 3 chapter 4
e.g.)
folder 1 folder 2
file 1
file 2 file 1
file 2
file 3
file 4
JPEG
audio CD
*4, 6, 8
digital audio
5 inches
(12 cm)
or
3 inches
(8 cm)
e.g.)
track 1 track 2 track 5
track 6
track 3
track 4
audio CD
e.g.)
folder 1 folder 2
file 1
file 2 file 1
file 2
file 3
file 4
JPEG
CD-RW
CD-R
*4, 5, 6, 7, 8
digital audio
or JPEG
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1 : This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-video do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special
properties of discs.
*6: You can play back discs which bear the marks above. If you use non-standardized discs, this unit may not play them back.
Even if they are played back, the sound or video quality will be compromised.
*7: If the recorded portion of the disc is too small (smaller than 2-3/16 inches (55mm) across), it may not be played back.
*8: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
Unplayable discs
NEVER play back the following discs as a malfunction may result!
DVD-audio / DVD-RAM / DVD-ROM for personal computers / DVD with region codes other than 1 or ALL /
CD-ROM for personal computers / HD DVD / Blu-ray Disc™ / photo CD / CD-i / video CD
Any other discs without compatibility indications.
Note(s):
Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD
layer cannot be delivered.
DVD
DVD-Video
7
EN
Connections
SETUP
Rear terminals
1
AUDIO OUT jacks
Connect an audio cable here through the audio Input jacks on a television or another
audio device.
2
VIDEO OUT jack
Connect a video cable here through the video Input jack on a television.
3
HDMI OUT jack
Connect a TV / AV receiver / amplifier or other device with an HDMI compatible port
with an HDMI cable.
Note(s):
Please purchase the necessary cables at your local store. (Refer to pages 8 - 9.)
AUDIO
OUT
L
R
VIDEO
OUT
HDMI OUT
2 1
3
8
EN
Included cables used in this connection are as follows:
• Audio cable (L/R) × 1
• Video cable × 1
Note(s):
Connect this unit directly to your TV.
If audio / video cables are connected to a VCR, pictures may be distorted due to the copy protection system.
After connecting to your TV:
You will need to find the viewing channel (external input channel) on your TV.
Please refer to your TV’s owner’s manual for details.
Input modes for common TV brands:
Listed below are inputs for common brand name TV’s.
Connection to a TV
Philips: VIDEO, SOURCE
Emerson: VIDEO, AUX
Hitachi: INPUT, AUX
JVC: VIDEO, VIDEO1, VIDEO2, VIDEO3
LG: INPUT, AUX
Magnavox: AUX CHANNEL, SOURCE
Panasonic: TV/VIDEO
RCA: INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung: TV/VIDEO
Sanyo: VIDEO
Sharp: 00
Sony: VIDEO1, VIDEO2, VIDEO3
Toshiba: TV/GAME
Method 1
Method 2
better picture best audio / picture
TV
VIDEO OUT HDMI OUT
AUDIO
OUT
L
R
VIDEO
OUT
HDMI OUT
AUDIO
OUT
L
R
VIDEO
OUT
HDMI OUT
A
UDI
O
OU
T
L
R
VID
O
OU
T
HDMI IN
and
AUDIO OUT
(Analog audio)
AUDIO
OUT
L
R
VIDEO
OUT
HDMI OUT
AU
D
I
O
OU
T
L
R
H
DMI
OU
T
VIDEO IN
VIDEO INPUT Y/VIDEO INVIDEO IN
oror
Video cable
(included)
HDMI cable
(not included)
This unit
AUDIO IN
L
R
AUDIO
OUT
L
R
VIDEO
OUT
HDMI OUT
VIDE
O
OU
T
H
DMI
OU
T
This unit
TV
Audio cable
(included)
9
EN
Connection to an audio system
Included cables used in this connection are as follows:
Audio cable (L/R) × 1
Please purchase the rest of the necessary cables at your local store.
AUDIO
OUT
L
R
VIDEO
OUT
HDMI OUT
VID
E
O
OU
T
H
DMI
O
U
T
Audio
This unit
Analog audio connection
AUDIO OUT
Audio cable (included)
Stereo system with analog audio Input jacks
Analog audio
input jacks
HDMI IN
AUDIO
OUT
L
R
VIDEO
OUT
HDMI OUT
AUDI
O
O
U
T
L
R
VIDE
O
O
U
T
Digital audio connection
HDMI cable
(not included)
AV receiver / amplifier with a HDMI input jack
HDMI input jack
HDMI OUT
HDMI audio
Media Audio recording format
“HDMI Audio” setting
“Bitstream” “PCM”
DVD-Video
Dolby Digital Dolby Digital 2ch PCM
DTS DTS Mute
MPEG 2ch PCM 2ch PCM
LPCM 2ch PCM 2ch PCM
audio CD 2ch PCM 2ch PCM 2ch PCM
DTS-CD DTS DTS Mute
HDMI mode and actual output signals
You can change the resolution of the video signal being output from the HDMI OUT in “SYSTEM“ menu. (Refer to page 17.)
Copyright protection system
To play back the digital video images of DVD-video via an HDMI connection, it is necessary that both the player and the display
device (or an AV receiver / amplifier) support a copyright protection system called HDCP (high-bandwidth digital content
protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV
device. This unit supports HDCP.
Please read the operating instructions of your display device (or AV receiver / amplifier) for more information.
Note:
When using HDCP-incompatible display device, the picture will not be viewed properly.
The audio signals from the HDMI jack (including the sampling frequency, the number of channels and bit length) may be
limited by the device that is connected.
Among the display device(s) that support HDMI, some do not support audio output (for example, projectors). In connections
with device such as this unit, audio signals are not output from the HDMI output jack.
When this unit’s HDMI jack is connected to a DVI-D compatible display device(s) (HDCP compatible) with an HDMI-DVI
converter cable, the signals are output in digital RGB.
10
EN
[DVD]
[CD]
[JPEG]
To move the cursor.
To enter values in the input field.
------
To switch between pages when
a file list is displayed.
To rotate the picture during
playback of JPEG files. (JPEG)
To repeat between your chosen points A and B. (DVD) (CD)
To select camera angles on a
disc.
------
To select audio language on
a disc.
------
To display the current disc information.
To select Items or settings.
To search forward / backward through a disc. ×2, ×4, ×8, ×20 DVD
CD
To begin slow forward
playback in the pause mode.
------
To call up the menu on a disc.
To display the thumbnail
when a disc with JPEG files
is inserted and the file is
highlighted. (JPEG)
------ T o play back randomly. (CD)
To open or close the disc tray.
To turn on the unit.
To pause disc playback.
To advance playback one
frame at a time.
------
To start playback or resume playback.
To play back a chapter, title or
disc repeatedly.
To play back repeatedly.
To call up the menu when
playing back a disc.
To return to the file list when
thumbnail is displayed. (JPEG)
To search chapter, title or time.
To select button in menu. (DVD)
To search tracks or files.
To search time. CD
To call up the setup menu.
To skip chapters or titles.
To skip tracks.
To switch between pages when
thumbnail is displayed. (JPEG).
To turn the unit on or to turn the unit into the standby mode.
To completely turn off the unit, you must unplug the AC power cord.
To stop playback.
To select subtitle language on
a disc.
------
To call up the title menu on a
disc.
------
To magnify part of a picture. (×1.5, ×2, ×2.5) (DVD) (JPEG)
Installing the batteries for the
remote control
Install 2 AAA (1.5V) batteries matching
the polarity indicated inside battery
compartment of the remote control.
* Batteries not included.
Keep in mind the following when using
the remote control:
Make sure that there are no obstacles
between the remote control and the
remote sensor on the unit.
The maximum operable ranges from
the unit are as follows.
Line of sight:
approx. 23 feet (7m)
Either side of the center:
approx. 16 feet (5m) within 30°
Above: approx. 16 feet (5m) within 15°
Below: approx. 10 feet (3m) within 30°
Remote control
Note(s):
Do not mix alkaline, standard
(carbon-zinc), or rechargeable (ni-
cad, ni-mh, etc) batteries.
Do not mix old and new batteries.
Always remove batteries from remote
control if they are dead or if the
remote control is not to be used for
an extended period of time. This will
prevent battery acid from leaking into
the battery compartment.
About the remote control
Button
(Alphabetical order)
Media
11
EN
DVD FUNCTIONS
Playback
[DVD]
[CD]
(
[JPEG]
on page 12
)
1
Press [ y ] to turn on this unit.
2
Press [ A ] and insert a disc
with label facing up.
3
Press [ B ] to start playback.
4
Press [ C ] to stop playback.
Note(s):
Slow forward speed is different depending on the disc.
Approximate speed is ×1/2, ×1/4 and ×1/8.
Slow forward search
[DVD]
Press [ g ] repeatedly in the pause mode
to select the required forward speed.
To continue playback, press [ B ] .
SF 1/2
Fast forward / Reverse search
[DVD]
[CD]
Use [ g ] or [ h ] repeatedly during
Playback to select the required forward or
reverse speed.
To continue playback, press [ B ] .
X2
Pause and step-by-step playback
[DVD]
[CD]
[JPEG]
Press [ F ] during playback.
To continue playback, press [ B ] .
[DVD]
The disc goes forward by one frame each time [ F ] (on the
remote control) is pressed in the pause mode.
To continue playback, press [ B ] .
Note(s):
Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.
Resume playback
[DVD]
[CD]
Press [ C ] during playback. PRE STOP icon
will appear at the top-left on the TV screen.
Press [ B ] . RESUME icon will appear at the
top-left on the TV screen and playback will
resume from the Point where playback was
stopped.
PRE STOP
Note(s):
To cancel resume, press [ C ] one more time in the stop
mode.
The resume playback information stays in unit memory
even when the power is turned off, as long as the disc
stays in the unit.
Note(s):
Fast forward or reverse search speed is different depending
on the disc. Approximate speed is ×2, ×4, ×8 and ×20.
Note(s):
Zooming function does not work while the disc menu is
displayed.
Some part of the picture may not be zoomed depending
on the disc or playback status.
Disc menu
[DVD]
Some discs contain menus which allow you to customize DVD
playback. Use [K / L / 0 / 1] to select an item, then press [OK],
[ B ] (on the unit).
2
Zoom
[DVD]
[JPEG]
1) Press [ZOOM] repeatedly during playback
to select the required zoom factor:
×1.5, ×2 or ×2.5.
2) Use [K / L / 0 / 1] to slide the zoomed
picture across the TV Screen.
3) To exit the zoom function, press [ZOOM] repeatedly to
select “ZOOM 1”(Off).
ZOOM 2
Calling up a menu screen during playback
[DVD]
• Press [MENU] to call up the disc menu.
• Press [TOP MENU] to call up the title menu.
4
3
1
2
Before:
Turn on the TV, amplifier and any other device(s) which are
connected to this unit. Make sure the TV and audio receiver
(not included) are set to the correct channel/Input.
Note(s):
When you play back a DVD or CD-R/-RW with JPEG Files,
refer to details on page 12.
• “ This operation is not available.” may appear at the top-
left on the TV screen when the operation is prohibited by
the disc or this unit.
Some DVD may start playback from title 2 or 3 due to
specific programs.
During the playback of a 2-layered disc, pictures may stop
for a moment. This happens while the 1st layer is being
switched to the 2nd layer. This is not a malfunction.
You can change the on-screen language in “Menu” setting.
(Refer to page 18.)
Please note :
Most instructions in this manual refer to remote control use.
This unit will automatically turn on the screen saver after 5 minutes of inactivity and into the standby mode after 25 minutes
of inactivity.
Lights up when power is On.
2 1
12
EN
Search functions
Using time search
[DVD]
[CD]
Using track / file search
[CD]
[JPEG]
Using [SEARCH/NUMBER]
Using title / chapter search
[DVD]
Using [SEARCH/NUMBER]
• Press [SEARCH/NUMBER] once for
the title search.
1
Using [ H , G ] (SKIP)
2 Enter the desired title or chapter
number.
JPEG playback
1 Select the desired folder or file.
2 Press [OK] or [ B ] (on the unit).
Playback will start from the first file of
the folder or files.
Reso :
Photo_4.jpg
Folder_2
Folder_3
Photo_3.jpg
Folder_1
Photo_1.jpg
Photo_5.jpg
Photo_2.jpg
Photo
Size :
Date :
800x600
118KB
None
[ C:/ ]
JPEG is a method of compressing data in files.
You can copy JPEG files on DVD or CD-R/-RW from a computer and play back the files on this unit.
[JPEG]
Insert a JPEG formatted disc, then the file list will automatically appear on the TV screen. (For a disc with JPEG files only)
Note(s):
Some selections may take a while to be recognized.
Refer to “On-screen display” on page 13 for more details.
A maximum of 189 folders or 9999 files may be recognized on one disc.
(ISO9660 format files)
For UDF format files recorded on DVD media, maximum of 2,000 files may be
recognized. It may take a while to switch between pages for a file list.
Up to 8 hierarchies can be recognized in one folder.
File in the 9th or deeper hierarchies cannot be played back.
To rotate the picture, press the cursor buttons during playback of JPEG files.
Displayed digit differs depending on
the contents. The same number of
digits that are stored on the disc must
be entered.
Press cursor [0] or [1] to move the
digit that you wish to change.
Press cursor [o] or [p] to change the
number.
1
3 Press [OK]. 3 Press [OK]. 3 Press [OK].
2 Enter the desired track / file number.
e.g.) CD
1
Available search mode
Displayed list
Track search
[CD]
File search
File list / thumbnail
[JPEG]
It is recommended that the files are recorded under the following conditions :
Applicable JPEG file Remarks
Normal playback
Pixel upper limit: 6,000 × 6,000 pixel
Pixel lower limit: 96 × 96 pixel
A JPEG image that extends beyond the screen
is reduced so that it will be displayed within the
screen.
1 1
Press cursor [1] to
highlight the time.
2 Enter the desired time.
e.g.) DVD
For the chapter search, press cursor
[1] to highlight the chapter number.
Title number is displayed with 2-digit,
Chapter number is displayed with 3-digit.
Press cursor [0] or [1] to move the
digit that you wish to change.
Press cursor [o] or [p] to change the
number.
Using [ H , G ] (SKIP)
Note(s):
The random playback will be cleared
when you select time search during
random playback (for CD only).
Track02
Track03
Track01
k
Music
CDDA 0 0 : 0 2 : 3 4TRK 0 1 / 1 2
Music
Title 0 0 : 0 2 : 3 402/44 Chapter 001/027
Music
Title 0 2/ 44 Chapter 0 01 / 02 7 0 0 : 0 2 : 3 4
TR 1 TR 2 TR 3 TR 4
Current track
CH 1 CH 2 CH 3 CH 4
Current chapter
Press cursor [0] or [1] to move the
digit that you wish to change.
Press cursor [o] or [p] to change the
number.
Note(s):
The random playback will be cleared
when you select track search during
random playback (for CD only).
13
EN
Music
Title 0 0 : 0 2 : 3 402/44 Chapter 001/027
Music
2/92/ 8 Eng DD5.1CH 1 / 3 Spa
A
B
C
On-screen display
[DVD]
[CD]
F
D
G
E
1
2
[JPEG]
You can check the information about the current disc by pressing [INFO].
Insert a JPEG formatted disc, then the folder / file list will
automatically appear on the TV screen.
Press [MENU] to display the thumbnail screen while an
available file is highlighted.
Press [ H ] or [ G ] to switch between pages.
Press [BACK] to go back to the file list.
3
A:
Current title number / total titles
B:
Current chapter number / total chapters
C:
Elapsed time of the current time
D:
Currently selected language / total languages
E:
Current audio
F:
Currently selected subtitle / total subtitles
G:
Currently selected angle / total angles
Track02
Track03
Track01
k
Music
CDDA 0 0 : 0 2 : 3 4TRK 0 1 / 1 2
A
B
T
rac
k0
2
Trac
k0
3
T
rac
k0
1
0 0
:
0
2
:
3
4
1
0
/
1
2
C
A:
Current track number / total tracks
B:
Current repeat mode
Track repeat :
TRACK
Repeat all :
C:
Elapsed time of the current time
2
1
Photo_1
Photo_2 Photo_3
Photo_4
Photo_5 Photo_6
Reso :
Photo_4.jpg
Folder_2
Folder_3
Photo_3.jpg
Folder_1
Photo_1.jpg
Photo_5.jpg
Photo_2.jpg
Photo
Size :
Date :
800x600
118KB
None
[ C:/ ]
Folder name
Date of the file
File size
Resolution of the file
Thumbnail
(only while JPEG file list is displayed)
File / folder list
Thumbnail
File name
14
EN
1
2
Repeat / random playback
Each time you press [REPEAT], repeat
function changes as example below.
Repeat playback
[DVD]
[CD]
[JPEG]
Repeat function is available only during
playback.
Repeat A-B playback
[DVD]
[CD]
Repeat function is available only during
playback.
[CD]
Note(s):
To exit the sequence, press [A-B
REPEAT] so that “A-B CANCEL”
appears.
[JPEG]
1
[DVD]
1
Random playback
[CD]
This function shuffles the playing tracks
in a random mode instead of playback in
a sequential track mode.
Note(s):
During random playback, you cannot
go back to the previous track.
Press [ G ] to search tracks or files
randomly.
Random playback will start.
REP OFF
(Repeat off)
REP CHAPTER
(Current chapter repeat)
REP TITLE
(Current title repeat)
REP ALL
(Entire disc repeat)
REP OFF
(Repeat off)
REP 1
( Current track repeat)
REP ALL
(Entire disc repeat)
REP OFF
(Repeat off)
REP 1
( Current track repeat)
REP DIR
( Current folder repeat)
REP ALL
(Entire disc repeat)
Press [A-B REPEAT] again at your
desired ending point. (B)
Point B should be in the same title or
track as point A.
Press [A-B REPEAT] at your desired
starting Point. (A)
REP OFF
REPEAT A-
e.g.) DVD
REPEAT A-B
Music
RANDOM : On
15
EN
1
Special settings
Subtitle language
[DVD]
This unit allows you to select a subtitle
language (if available) during DVD
Playback.
Each time you press [SUBTITLE], subtitle
language changes as example below.
: Off (No subtitle)
: 1 English (English subtitle)
: 2 French (French subtitle)
...
Camera angles
[DVD]
Some DVD’s may contain scenes which
have been shot simultaneously from
various angles. You can change the
camera angle if icon appears on the
TV screen.
1
Each time you press [ANGLE], camera
angle changes.
Audio language
[DVD]
This unit allows you to select an audio
language (if multiple languages
are available on a disc) during DVD
playback.
1
Each time you press [AUDIO], audio
language changes as example below.
Note(s):
Some discs will only allow you to
change the audio setting from the
disc menu. Refer to the manual
accompanying the discs for details.
If your language is not shown after
pressing [AUDIO] several times, the
disc may not have that language.
However, some discs allow audio
language setting on the disc menu.
(Operation varies depending on
the disc, so refer to the manual
accompanying the disc.)
: 1 English (English audio)
: 2 French (French audio)
: 3 Spanish (Spanish audio)
...
:OFF
: 1 English DD5.1CH
:1/3
Note(s):
If your language is not shown after
pressing [SUBTITLE] several times,
the disc may not have that language.
However, some discs allow subtitle
language setting on the disc menu.
(Operation varies depending on the
disc, so refer to the manual along
with the disc.)
• When This operation is not
available.” appears on the TV screen,
it means no subtitle is recorded on
the scene.
Some discs will only allow you
to change the subtitle from the
disc menu. Refer to the manual
accompanying the discs for details.
16
EN
You can change the settings on the unit. Setting items are displayed in gray when they are not available under the
conditions at the time.
1 Press [SETUP].
2 Select the desired item.
System
Language
Audio
Video
Preference
1 Touch Standby
16:9 Widescreen
Auto
On
On
On
On
TV Display
HDMI Video
1 Touch Play
Voice Guide
EasyLink
System menu Language menu Audio menu Video menu Preference menu
System
Language
Audio
Video
Preference
O
On
TV Display
HDMI Video
1 Touch Play
Voice Guide
EasyLink
1 Touch Standby
System
Language
Audio
Video
Preference
English
Auto(English)
Audio
Subtitle
Menu
Disc Menu
Français
Español
System
Language
Audio
Video
Preference
8
Night Mode
HDMI Audio
0
System
Language
Audio
Video
Preference
12
Set Contrast
Set Brightness
0
Set Color
Set Tint
System
Language
Audio
Video
Preference
2 [G]
1 [Kid Safe]
3 [PG]
5 [PGR]
4 [PG-13]
6 [R]
7 [NC-1 7 ]
8 [Adult]
Password
Default
Parental Control
page 17
A
page 18
B
page 19
C
page 20
D
page 21
E
DVD settings
<Setup menu>
System
Language
Audio
Video
Preference
1 Touch Standby
16:9 Widescreen
Auto
On
On
On
On
TV Display
HDMI Video
1 Touch Play
Voice Guide
EasyLink
17
EN
A
System Settings
You can change the display functions. Follow steps 1 and 2 on page 16.
3 Select the desired item.
System
Language
Audio
Video
Preference
O
On
TV Display
HDMI Video
1 Touch Play
Voice Guide
EasyLink
1 Touch Standby
<System menu>
4
Voice Guide: (Default: On)
Turns on/off the voice guide function.
ge
O
TV Display
HDMI Video
1 Touch Play
EasyLink
1 Touch Standby
Voice Guide On
Select the desired
setting.
5 To Exit the Menu
Note(s):
Voice Guide:
In order to enable the
voice guide function, the
OSD language needs to
be set to English. Voice
guide is not available in
French or Spanish.
“HDMI Audio” cannot be
configured when voice
guide is set to On, as it is
fixed to PCM. In order to
configuring the setting,
set voice guide to off.
TV Display:
Select “4:3 Crop” for a
full height picture with
both sides adjusted.
Select “4:3 Normal”,
black bars may appear
on the top and bottom
of the TV screen.
Select “16:9 Widescreen”
if a wide-screen TV is
connected to this unit.
Select “16:9 Squeeze” to
display 4:3 aspect ratio
in the center of the 16:9
screen when playing
back 4:3 images.
TV Display: (Default: 16:9 Widescreen)
Sets the aspect ratio of the playback image to fit your TV.
See the note on the right.
ge
HDMI Video
1 Touch Play
Voice Guide
EasyLink
1 Touch Standby
4:3 Normal
4:3 Crop
16:9 Squeeze
TV Display
16:9 Widescreen
HDMI Video: (Default: Auto)
You can select the desired “HDMI Video” among the
settings. See the note on the right.
ge
TV Display
HDMI Video
1Touch Play
Voice Guide
EasyLink
1 Touch Standby
480P
Auto
720P
1080i
1080P
EasyLink: (Default: On)
EasyLink allows integrated system control over HDMI.
See the note below.
ge
TV Display
HDMI Video
1Touch Play
Voice Guide
EasyLink
1 Touch Standby
O
On
Note:
HDMI video:
Auto:
HDMI video resolution will be selected automatically depending on the connected HDMI device.
EasyLink:
EasyLink allows integrated system control over HDMI and is part of the HDMI standard. This function may not work
properly depending on the device connected to the unit. When “EasyLink” setting is set to “On” the functions listed below
will be available.
One touch play
When the buttons below on the remote control are pressed then operations are performed on this unit, the TV will
automatically be turned on and switched to the appropriate video input.
Buttons for one touch play:
- [PLAY B], [SKIP H , G], [INFO], [SETUP]
- [TOP MENU], or [MENU] (when a disc is inserted in the unit)
One touch standby
When you press and hold [POWER] for 2 seconds, it turns off the TV first, then turns off this unit.
When the connected EasyLink (HDMI CEC) compatible display device is turned off first, it then turns off the power to this
unit.
System information
Get & set menu language
The unit recognizes the OSD language set on the TV and automatically sets the same language as the on-screen language
in “Menu” setting.
Feature is available only when “Menu” in “LANGUAGE” menu is set to “Auto” while connected via an HDMI cable.
18
EN
B
Language settings
Follow steps 1 and 2 on page 16.
3 Select the desired item.
System
Language
Audio
Video
Preference
English
Auto(English)
Audio
Subtitle
Menu
Disc Menu
Français
Español
<Language menu>
4
Menu: (Default: English)
Sets the language for the on-screen display.
5 To exit the menu
e
Audio
Subtitle
Menu
Disc Menu
English
Auto(English)
Français
Español
Select the desired
language.
Audio: (Default: English) *1 *2
Sets the audio language.
Audio
Subtitle
Menu
Disc Menu
e
French
English
Spanish
Subtitle: (Default: Off) *1 *2
Sets the subtitle language.
Audio
Subtitle
Menu
Disc Menu
e
English
French
Spanish
O
Disc Menu: (Default: English) *1
Sets the language in DVD menu.
Audio
Subtitle
Menu
Disc Menu
e
French
Spanish
English
Note(s):
*1
Language options are not available with some discs.
Only the languages supported by the disc can be selected.
*2
“Language” setting for “Audio” and “Subtitle” are not available with some discs. If multiple languages are available on
disc, then select [AUDIO] or [SUBTITLE] to select the desired language. Refer to page 15 for detail.
In order to enable the voice guide function, the OSD language needs to be set to English. Voice guide is not available in
French or Spanish.
19
EN
C
Audio settings
Choose the appropriate audio settings for your device. It only affects the sound during DVD playback. Follow steps 1 and 2 on
page 16.
3 Select the desired item.
System
Language
Audio
Video
Preference
8
Night Mode
HDMI Audio
0
<Audio menu>
4
HDMI Audio: (Default: PCM)
Set to “Bitstream” when the unit is connected to a Dolby
Digital decoder.
Bitstream: outputs a Dolby Digital signals.
PCM: convert the Dolby Digital into PCM (2 channel).
5 To exit the menu
e
Night Mode
HDMI Audio
PCM
Bitstream
Select the desired
setting.
Night Mode (Default: 0)
Adjusts for clarity even when the volume is Low, by
compressing the range of the lowest sound level and the
highest sound level.
ge
nce
8
Night Mode
HDMI Audio
0
Note(s):
Audio Out:
Bitstream:
Connecting to a Dolby Digital decoder for Dolby Digital audio output.
The multi-channel audio signals are output from HDMI OUT jack with Bitstream or LPCM.
PCM:
Connecting to another device (an MD deck or DAT deck etc.) without a Dolby Digital decoder.
Convert the Dolby Digital into LPCM (2 channel).
This unit does not support DTS audio. This is not a malfunction.
You need to set this unit to “Bitstream” in the “HDMI Audio” Menu and also need to connect to a TV or amplifier that
supports DTS, then the audio will be output as DTS.
It is only available when connected via a HDMI cable.
“HDMI Audio” cannot be configured when voice guide is set to on, as it is fixed to PCM. In order to configuring the
setting, set voice guide to off.
20
EN
D
Video settings
You can change the video functions. Follow steps 1 and 2 on page 16.
3 Select the desired item.
System
Language
Audio
Video
Preference
12
Set Contrast
Set Brightness
0
Set Color
Set Tint
<Video menu>
4
Set Brightness (Default: 6)
Adjusts the brightness.
5 To Exit the Menu
e
ce
12
0
Set Contrast
Set Brightness
Set Color
Set Tint
Adjust to the
Desired Level.
Set Contrast (Default: 6)
Adjusts the contrast.
ge
nce
12
0
Set Contrast
Set Brightness
Set Color
Set Tint
Set Color (Default: 0)
Adjusts the color saturation.
ge
nce
12
0
Set Contrast
Set Brightness
Set Color
Set Tint
Set Tint (Default: 0)
Adjusts the color tone.
ge
nce
6
-6
Set Contrast
Set Brightness
Set Color
Set Tint
Note(s):
The horizontal white bars indicate the default setting.
The settings will remain effective even if the unit is switched into the Standby mode.
The effect of picture adjustment may differ depending on the connected TV.
21
EN
E
Preference settings
You can change the display functions. Follow steps 1 and 2 on page 16.
3 Select the desired item.
System
Language
Audio
Video
Preference
2 [G]
1 [Kid Safe]
3 [PG]
5 [PGR]
4 [PG-13]
6 [R]
7 [NC-1 7 ]
8 [Adult]
Password
Default
Parental Control
<Preference menu>
4
Parental Control: (Default: 8[Adult])
Sets the rating level for the disc playback.
Rating settings allows you to set the rating levels of
your DVD. Playback will stop if the ratings exceed the
levels you set.
The rating level can be changed when a password
has not been set yet for the first time use.
If you have set a password already,
“Parental Control” cannot be selected.
5 To exit the menu
e
ce
2 [G]
1 [Kid Safe]
Password
Default
Parental Control
3 [PG]
5 [PGR]
4 [PG-1 3 ]
6 [R]
7 [NC-1 7 ]
8 [Adult]
Select the desired
rating.
Note(s):
Password:
If you forget the
password, enter “4737”
at step 4, then enter
your new password.
Playback will stop if the
ratings exceed the levels
you set, it will require
you to enter a password
before the disc will play
back.
This function is available
only when is
displayed.
Default:
When you do not
wish to initialize, press
[SETUP] to exit the
menu at step 4.
Password:
Sets the password for “Parental Control” and “Default”
settings.
For the first time use.
This number will be used as the password.
Record in case you forget it.
m
age
ence
Password
Default
Parental Control
_ - - -
Enter any 4-digit number(except for 4737).
Press cursor [o] or [p] to change the number, then
press cursor [1].
• Press cursor
[0]
to erase if you input the incorrect
number
.
When 4-digit numbers are entered, press [OK].
A password has been set already. (
is displayed.)
m
age
ence
Password
Default
Parental Control
_ - - -
Enter your 4-digit password.
Press cursor [o] or [p] to change the number, then
press cursor [1].
When 4-digit numbers are entered, press [OK].
Default:
Reset to default setting.
“Default” is not selected if you have set a password
already.
e
ce
Password
Default
Parental Control
Restore
22
EN
Troubleshooting guide
If the Unit does not perform properly when operated as instructed in this owner’s manual, refer to the following.
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual
for more details on correct operation’s.
Not all functions are available for all commercial discs.
INFORMATION
Problem Corrective action
No power.
Check if the AC power cord is properly connected.
Unplug from the AC outlet, and wait for 5-10 seconds and then plug it in again.
No sound or picture.
Check if the TV is switched on.
Check the video connection.
Check the audio / video cable connections to the TV.
(Refer to page 8.)
Check whether the connected TV or other device supports HDCP.
(This unit will not output a video signal unless the other device supports HDCP.)
Distorted picture.
Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
Connect the unit directly to the TV.
Completely distorted picture or
black / white picture with DVD.
Connect this unit directly to the TV.
Make sure the disc is compatible with the unit.
No Sound or Distorted Sound.
Adjust the volume.
Check that the speakers are connected correctly.
No DTS Audio is Output.
This unit does not support DTS audio.
This is not a malfunction.
You need to set this unit to “Bitstream” in “HDMI Audio” menu and also need to connect to the
TV or amplifier that supports DTS, then the audio will be output as DTS. It is only available when
connected via a HDMI cable.
“HDMI Audio” cannot be configured when voice guide is set to on. In order to set “HDMI Audio” to
“Bitstream”, set voice guide to Off.
Bitstream is not output in Dolby Digital
audio.
Make sure that “Voice Guide” is set to “Off”.
“HDMI Audio” is fixed to “PCM” when “Voice Guide” is set to “On”. In order to set “HDMI Audio” to
“Bitstream”, set “Voice Guide” to “off”.
Picture freezes momentarily during
playback.
Check the Disc for Fingerprints / Dirty and Clean with a Soft cloth wiping from center to edge.
When Voice Guide is set to “On” and playback functions (such as Fast-forward, etc) are used, DVD
playback will be interrupted while a Voice Guide message is being output. In order to disable Voice
Guide, press [SETUP] on the remote control, then select “SYSTEM” “Voice Guide” “Off”.
Disc cannot be played back.
Clean the disc.
Ensure the disc is inserted in correct position.
Insert a correct Type disc that plays back on this unit.
Check if the disc is defective by trying another disc.
Check if the parental settings exceeds the levels you set in the “Movie Rating” setting. (for DVD only)
Handle a disc with special care so that it does not have fingerprints, scratches, or dust on its surface.
No Return to Start-up Screen when
Disc is Removed.
Turn off the unit once and then restart.
The Unit does not Respond to
the Remote Control.
Aim the remote control directly at the sensor on the front panel.
Reduce the distance to the unit.
Re-insert the batteries with their polarities (+ / – signs) as indicated.
Replace the batteries in the remote control.
Press and hold any buttons on the remote control toward a digital camera. The remote control is
working if you confirm a pulsating infrared light through the digital camera.
Buttons Do Not Work or the Unit Stops
Responding.
Please attempt to reset the unit by unplugging the AC power cord from the wall outlet and then plug
it in again after 5-10 seconds.
The Unit Does Not Respond to some
Operating Commands during Playback.
Operations may not be permitted by the disc. Refer to the instructions for the disc.
The Unit Cannot Read CD / DVD.
Use a commonly available cleaning CD / DVD disc to clean the lens before sending the unit for repair.
Angle Does Not Switch.
The angle cannot be switched for a DVD which does not contain multiple angles. In some cases
multiple angles are only recorded for specific scenes.
The Password for Rating Level
has been Forgotten.
Enter the default password “4737”, then your forgotten password will be cleared. Then the rating
level plus password will have to be set again.
Specifications
Output signal format:
NTSC color
Power source:
120 V AC + / - 10%, 60 Hz + / - 0.5%
Power consumption:
7 W (standby : 0.9 W)
Operating temperature:
41°F (5 °C) to 104 °F (40 °C)
Dimensions:
W : 9.9 inches (250 mm)
H : 2.0 inches (50.2 mm)
D : 7.4 inches (187.7 mm)
Weight:
Approx. 1.95 lbs. (0.88 kg)
Designs and specifications are subject
to change without notice.
If there is a discrepancy between
languages, the default language will be
English.
NINETY (90) DAY LIMITED WARRANTY
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth below.
WHO IS COVERED:
This product is warranted to the original purchaser or the person
receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original sales
receipt showing the product name and the purchase date from an
authorized retailer is considered such proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1) repair
the product at no charge, using new or refurbished replacement
parts, or (2) exchange the product with a product that is new
or which has been manufactured from new, or serviceable used
parts and is at least functionally equivalent or most comparable
to the original product in current inventory, or (3) refund the
original purchase price of the product.
The Company warrants replacement products or parts provided
under this warranty against defects in materials and workmanship
from the date of the replacement or repair for ninety (90) days or for
the remaining portion of the original product’s warranty, whichever
provides longer coverage for you. When a product or part is exchanged,
any replacement item becomes your property and the replaced item
becomes the company’s property. When a refund is given, your
product becomes the company’s property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company manufactured
products that can be identified by the trademark, trade name,
or logo affixed to it. This Limited Warranty does not apply to any
hardware product or any software, even if packaged or sold with
the product, as manufacturers, suppliers, or publishers may provide
a separate warranty for their own products packaged with the
bundled product. The company is not liable for any damage to or
loss of any programs, data, or other information stored on any media
contained within the product, or other additional product or part not
covered by this warranty. Recovery or reinstallation of programs,
data or other information is not covered under this Limited Warranty.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-supplied product,
(b) to damage caused by service performed by anyone other than
company approved Authorized Service Location, (c) to a product or a
part that has been modified without written company permission, or
(d) if any serial number has been removed or defaced, or (e) product,
accessories or consumables sold “AS IS” without warranty of any kind
by including refurbished product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
Shipping charges to return defective product.
Labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna/signal source systems outside
of the product.
Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images
or screen markings resulting from viewing fixed stationary
content for extended periods, product cosmetic appearance
items due to normal wear and tear, unauthorized repair or
other cause not within the control of the company.
Damage or claims for products not being available for use, or
for lost data or lost software.
Damage from mishandled shipments or transit accidents
when returning product.
A product that requires modification or adaptation to enable
it to operate in any country other than the country for which it
was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
A product used for commercial or institutional purposes
(including but not limited to rental purposes).
Product lost in shipment and no signature verification receipt
can be provided.
Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE...
Contact Customer Care Center at:
1-866-515-1124
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY
IS THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE
ISSUING COMPANY NOT LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON
THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF
THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental or
consequential damages, or allow limitations on how long an implied
warranty lasts, so the above limitations or exclusions may not apply
to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, Inc.
1880 Braselton Hwy, Suite 118 #5012 Lawrenceville, GA 30043
24
ES
5
Si su Televisor tiene entradas de
AUDIO / VIDEO vea la sección
“Connection to a TV” en la página 8
en el manual de manejo. En caso
contrario, vea la sección “Connecting
to RF modulator (not included)” en la
página 2 en el manual de manejo.
Español
Conexiones
4 Para Salir del Menú.
1
Reproducción
4
3
Antes.
Encienda el Televisor, Amplifica-
dor y otros Equipo(s) conectados
a esta unidad.
Asegúrese que
el Televisor y
el Sintonizador
de Audio (no
provisto) están
en el Canal/
Entrada
correcto.
Control remoto
1
[DVD]
[CD]
[JPEG]
1 Para abrir o cer-
rar la bandeja
del disco
2 Ponga un disco
con la etiqueta
hacia arriba.
3 Para empezar la
reproducción
4 Para parar la
reproducción
1 Confirme que ha seleccionado
“Eng”
.
Para cambiar el Idioma en la
pantalla
3
3 Seleccione el Idioma deseado para
las indicaciones en la pantalla.
* Pilas no provistas.
[DVD]
[CD]
[JPEG]
Para mover el Cursor.
Para especificar valores en el campo de entrada.
------
Para cambiar entre páginas cuando se
visualiza la lista de archivos.
Para Girar la imagen en la reproducción
de Archivos JPEG. (JPEG)
Para Repetir entre su puntos A y B seleccionado. (DVD) (CD)
Para seleccionar los Ángulos de la
Cámara en un disco.
------
Para seleccionar idiomas de Audio en
un disco.
------
Para Mostrar la información del disco actual.
Para Seleccionar Opciones o Valores de configuración.
Para Buscar en Avance/Retroceso por un disco. (×2, ×4, ×8, ×20) (DVD) (CD)
Para Comenzar la Reproducción en
Cámara Lenta en el modo de Pausa.
------
Para Llamar el menú en un disco.
Para Visualizar la Miniatura cuando
insertó un disco con Archivos JPEG y
algún Archivo está resaltado. (JPEG)
------
Para Reproducir al Azar. (CD)
Para Abrir o Cerrar la bandeja del Disco.
Para Encender la unidad.
Para hacer una Pausa en la Reproducción.
Para Avanzar la Reproducción un
Cuadro cada vez.
------
Para Iniciar o Reanudar la Reproducción.
Para Reproducir Repetidamente un
Capítulo, Título o Disco.
Para Reproducir Repetidamente.
Para Volver al Menú o pantalla
anteriormente visualizado.
Para Volver a la Lista de Archivos
mientras se visualiza la Miniatura.
(JPEG)
Para Buscar un Capítulo, Título o Tiempo.
Para seleccionar el botón en el menú.
(DVD)
Para Buscar Pistas o Archivos.
Para Buscar el Tiempo. (CD)
Para Recuperar el menú de Configuración.
Para Saltar Capítulos o Titulo.
Para Saltar Pistas.
Cuando se Visualice la Miniatura,
presione el interruptor entre páginas.
(JPEG)
Para Encender la unidad o para Dejarla en el modo de Espera.
(Para Apagar Completamente la unidad, debe Desconectar el cable de Alimentacion de CA.)
Para Parar la Reproducción.
Para Seleccionar el Idioma de
Subtítulos de un disco.
------
Para Visualizar el Menú de Títulos de
un disco.
------
Para Agrandar la parte de una Imagen. (×1,5, ×2, ×2,5) (DVD) (JPEG)
Disco
Botón
(Orden alfabético)
System
Language
Audio
Video
Preference
English
English
O
English
Audio
Subtitle
Menu
Disc Menu
2 Seleccione “Menu”.
m
age
Auto(English)
English
Français
Español
Audio
Subtitle
Menu
Disc Menu
m
age
Auto(English)
English
Français
Español
Audio
Subtitle
Menu
Disc Menu
Instalación de las pilas en el
control remoto
2
2
4
GARANTÍA LIMITADA DE NOVENTA
(
90
)
DÍAS
COBERTURA DE GARANTÍA:
La obligacn de ésta garantía se limita a los términos
establecidos a continuacn.
QUIÉN ESTÁ CUBIERTO:
Este producto está garantizado para el comprador original o la
persona que reciba el producto como obsequio contra defectos
en materiales y mano de obra en base a la fecha de la compra
original (Periodo de garantía) a partir de un Distribuidor
Autorizado. El recibo de ventas original que muestre el nombre
del producto y la fecha de compra a partir de un distribuidor
autorizado se considera tal evidencia.
QUÉ ESTÁ CUBIERTO:
Esta garantía cubre productos nuevos si ocurre un defecto en
material o mano de obra y se recibe el reclamo válido dentro
del Periodo de garantía. Como su opcn, la compañía (1)
reparará el producto sin cargo, usando partes de reemplazo
nuevas o reacondicionadas, o (2) intercambiará el producto
con un producto nuevo o que haya sido fabricado a partir
de partes nuevas o usadas para servicio y por lo menos sea
funcionalmente equivalente o más comparable al producto
original en el inventario actual, o (3) reembolsará el precio
de compra original del producto. La Compañía garantiza los
productos o partes de reemplazo provistos bajo esta garantía
contra defectos en materiales y mano de obra desde la fecha
del reemplazo o reparación durante noventa (90) días o durante
la porción restante de la garantía del producto original, lo que le
proporcione a usted la mayor cobertura. Cuando se intercambie
un producto o parte, cualquier elemento de reemplazo se
convierte en su propiedad y el elemento reemplazado se
convierte en propiedad de la compañía. Cuando se proporcione
un reembolso, su producto se convierte en propiedad de la
compañía.
Nota: Cualquier producto que se venda y que esté identificado
como reacondicionado o renovado tiene una garantía limitada
de noventa (90) días.
El producto de reemplazo sólo se puede enviar si se cumplen
todos los requisitos de la garantía. El incumplimiento de tales
requisitos puede ocasionar un retardo.
LO QUE NO SE CUBRE: EXCLUSIONES Y LIMITACIONES:
La garantía limitada aplica sólo a los productos nuevos
fabricados por o para la compía que se pueden identificar
por la marca registrada, el nombre comercial o por tener el
logotipo correspondiente. Esta garantía limitada no se aplica a
ninn producto de hardware ni de software que no sea de la
compañía, incluso si viene empacado con el producto o si se
vende junto con éste. Los fabricantes, proveedores o editores
que no sean de la compañía pueden proporcionar una garantía
por separado para sus propios productos empacados con el
producto. La compañía no es responsable por ningún daño o
rdida de programas, datos u otra informacn almacenados
en algún medio contenido en el producto, ni por ningún otro
producto o pieza que no esté cubierta por esta garana. La
recuperación o la reinstalación de programas, datos u otra
información no está cubierta por esta garana limitada. Esta
garantía no aplica (a) a daños causados por accidente, abuso,
mal uso, negligencia, mala aplicacn o por productos no
provistos por la compañía; (b) a daño provocado por servicio
realizado por cualquier persona ó establecimiento de servicio
no autorizado por la compañía; (c) a productos o piezas
que se hayan modificado sin la autorizacn por escrito de
la compañía; (d) si se ha retirado o desfigurado el número
de serie; y tampoco se aplica la garantía a (e) productos,
accesorios o insumos vendidos TAL COMO ESTÁN sin garantía
de ningún tipo, lo que incluye productos vendidos TAL COMO
ESTÁN por algunos distribuidores.
Esta garantía limitada no cubre:
Los costos de envío al devolver el producto defectuoso.
Los costos de mano de obra por la instalación o con guración
del producto, el ajuste de controles del cliente en el producto y
la instalación o reparación de sistemas de antena o fuente de
señal externos al producto.
La reparación del producto o el reemplazo de piezas debido a
instalación o mantenimiento inadecuada, a conexiones hechas
a un suministro de voltaje inadecuado, sobrevoltaje de la línea
de alimentación, daño causado por relámpagos, imágenes
retenidas o marcas en la pantalla producto de la visualización
de contenido  jo durante períodos prolongados, reparaciones
cosméticas debido al desgaste normal, reparaciones no
autorizadas u otras causas que no se encuentren bajo el
control de la compañía.
Daños o reclamos por productos que no están disponibles para
su uso, por datos perdidos o por pérdida de software.
Daños debido a mala manipulación en el transporte o
accidentes de envío al devolver el producto.
Un producto que requiera modi cación o adaptación para
permitir su funcionamiento en algún país que no sea el
país para el que se diseñó, fabricó, aprobó y/o autorizó o la
reparación de productos dañados por estas modi caciones.
Un producto que se use para propósitos comerciales o
institucionales (lo que incluye, entre otros, los de alquiler).
La pérdida del producto en el envío y cuando no se pueda
proporcionar una  rma que veri que el recibo.
No operar según el Manual del propietario.
PARA OBTENER AYUDA…
Comuníquese con el Centro de Atencn al Cliente al:
1-866-515-1124
LA REPARACIÓN O EL REEMPLAZO, SEGÚN LO DISPONE ESTA
GARANTÍA, ES LA SOLUCIÓN EXCLUSIVA PARA EL CLIENTE.
LA COMPAÑÍANO SERÁ RESPONSABLE DE LOS DAÑOS
INCIDENTALES O INDIRECTOS QUE INFRINJAN ALGUNA
GARANTÍA EXPRESA O IMPLÍCITA SOBRE ESTE PRODUCTO.
CON EXCEPCIÓN DE LO QUE PROHÍBA LA LEY VIGENTE, TODA
GARANTÍA IMPLÍCITA DE COMERCIABILIDAD Y ADECUACIÓN
PARA UN PROPÓSITO PARTICULAR EN ESTE PRODUCTO
ESTÁ LIMITADA EN DURACIÓN A LO QUE ESPECIFIQUE ESTA
GARANTÍA.
Algunos estados no permiten las exclusiones ni la limitacn
de los daños incidentales o indirectos, ni permiten limitaciones
sobre la duración de la garantía implícita, de modo que las
limitaciones o exclusiones anteriores pueden no aplicarse a
usted.
Esta garantía le otorga derechos legales específicos. Usted puede tener otros derechos que varían entre los diferentes estados y provincias.
P&F USA, Inc.
1880 Braselton Hwy, Suite 118 #5012 Lawrenceville, GA 30043
P&F USA, Inc.
1880 Braselton Hwy, Suite 118 #5012 Lawrenceville,
GA 30043
P&F Mexicana, S.A. de C.V.
Av. La Palma No. 6, Col. San Fernando La Herradura.
Huixquilucan, Edo. de México. C.P. 52787
This product has been manufactured by and is sold
under the responsibility of P&F USA, Inc., and P&F
USA, Inc. is the warrantor in relation to this product.
The Philips trademark and the Philips Shield Emblem
are registered trademarks of Koninklijke Philips N.V.
used under license.
E6U20UL
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26

Philips DVP2902/F7 Manual de usuario

Categoría
Reproductores de DVD
Tipo
Manual de usuario

En otros idiomas