Sylvania SRTD219 Manual de usuario

Marca: Sylvania

Modelo: SRTD219

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Este manual también es adecuado para

TV DVD Combo SRTD219

19-INCH COLOR TV/DVD

SRTD219

OWNER’S

MANUAL

If you need additional assistance for set-up or operating

after reading owner’s manual, please call

TOLL FREE : 1-800-968-3429

Please read before using this equipment.

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

SUPPLIED ACCESSORIES

Batteries

Remote Control Unit

ACCESSORIES

2 AA Batteries

NE205UD

PART NO.

TD253-Body 02.11.28 13:37 Page 1

–

0C28

–

1.Read instructions-All the safety and operating instructions

should be read before the appliance is operated.

2.Retain Instructions-The safety and operating instructions

should be retained for future reference.

3.Heed Warnings-All warnings on the appliance and in the

operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions

should be followed.

5.Cleaning-Unplug TV/DVD from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the possi-

bility of the loss of an authorization code for a CATV con-

verter, is not intended to be unplugged by the user for clean-

ing or any other purpose, may exclude the reference to

unplugging the appliance in the cleaning description other-

wise required in item 5.

6.Attachments-Do not use attachments not recommended by

the TV/DVD manufacturer as they may cause hazards.

7.Water and Moisture-Do not use this TV/DVD near water-

for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool,

and the like.

8.Accessories-Do not place this TV/DVD on an unstable cart,

stand, tripod, bracket, or table. The TV/DVD may fall, caus-

ing serious injury to someone, and serious damage to the

appliance. Use only with a cart, stand, tripod, bracket, or

table recommended by the manufacturer, or sold with the

TV/DVD. Any mounting of the

appliance should follow the manu-

facturer’s instructions and should use

a mounting accessory recommended

by the manufacturer. An appliance

and cart combination should be

moved with care.

Quick stops, excessive force, and

uneven surfaces may cause the appli-

ance and cart combination to over-

turn.

Accessoires- Ne placez pas cette TV/DVD sur une table

roulante, un support, un trépied, une console ou une table

instable. Cette TV/DVD risquerait de tomber, pouvant

gravement blesser quelqu'un et l'appareil même pourrait

être sérieusement endommagé. N'utilisez qu'une table

roulante, un support, un trépied, une console ou une table

recommandé par le fabriquant, ou vendu avec la TV/DVD.

Pour n'importe quelle installation de l'appareil, on devra

suivre les instructions du fabriquant et l'on devra utiliser les

accessoires d'installation recommandés par le fabriquant.

L'ensemble combiné de l'appareil avec une table roulante

devra être déplacé avec précaution. Des arrêts brusques,

une force excessive et des surfaces inégales peuvent provo-

quer le renversement de l'ensemble combiné de

l'appareil/table roulante.

9. Ventilation-Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reliable

operation of the TV/DVD and to protect it from overheat-

ing, and these openings must not be blocked or covered.

The openings should never be blocked by placing the

TV/DVD on a bed, sofa, rug, or other similar surface. This

TV/DVD should never be placed near or over a radiator or

heat register. This TV/DVD should not be placed in a built-

in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s instructions

have been adhered to.

10.Power Sources-This TV/DVD should be operated only

from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local power

company. For TV/DVDs intended to operate from battery

power, or other sources, refer to the operating instructions.

11.Grounding or Polarization-This TV/DVD is equipped

with a polarized alternating-current line plug(a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try revers-

ing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSON-

NEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRESENT

WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE

APPLIANCE.

The caution marking is located on the rear of the cabinet.

PORTABLE CART WARNING

AVERTISSEMENT POUR UNE

TABLE ROULANTE PORTATIVE

S3126A

IMPORTANT SAFEGUARDS

TD253-Body 02.11.28 13:37 Page 2

–

0C28

–

GROUND CLAMPS

NEC - NATIONAL ELECTRICAL CODE

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

S2898A

WIRE

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

ELECTRODE SYSTEM

(NEC ART 250, PART H)

SERVICE

EQUIPMENT

CLAMP

ANTENNA

LEAD IN

ANTENNA

POWER SERVICE GROUNDING

GROUND

ELECTRIC

FIGURE A

12.Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience receptacles,

and the point where they exit from the appliance.

13.Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the TV/DVD, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with respect to

proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna-discharge

unit, connection to grounding electrodes, and requirements

for the grounding electrode. (Fig. A)

14.Lightning-For added protection for this TV/DVD receiver

during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will

prevent damage to the TV/DVD due to lightning and

power-line surges.

15.Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them

might be fatal.

16.Overloading-Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind

into this TV/DVD through openings as they may touch dan-

gerous voltage points or short out parts that could result in

a fire or electric shock. Never spill liquid of any kind on

the TV/DVD.

18.Servicing-Do not attempt to service this TV/DVD yourself

as opening or removing covers may expose you to danger-

ous voltage or other hazards. Refer all servicing to qualified

service personnel.

19.Damage Requiring Service-Unplug this TV/DVD from

the wall outlet and refer servicing to qualified service per-

sonnel under the following conditions:

a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the

TV/DVD.

c. If the TV/DVD has been exposed to rain or water.

d. If the TV/DVD does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions, as improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualified technician to restore

the TV/DVD to its normal operation.

e. If the TV/DVD has been dropped or damaged in any way.

f. When the TV/DVD exhibits a distinct change in perfor-

mance-this indicates a need for service.

20.Replacement Parts-When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock, injury to persons or other haz-

ards.

21.Safety Check-Upon completion of any service or repairs to

this TV/DVD, ask the service technician to perform routine

safety checks to determine that the TV/DVD is in proper

operating condition.

22.Heat-This TV/DVD product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

TD253-Body 02.11.28 13:37 Page 3

–

0C28

–

RADIO-TV INTERFERENCE

This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pur-

suant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be deter-

mined by turning the equipment off and on, the

user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment

and receiver.

3) Connect the equipment into an outlet on a cir-

cuit different from that to which the receiver is

connected.

4) Consult the dealer or an experienced radio/TV

technician for help.

FCC WARNING- This equipment may gener-

ate or use radio frequency energy. Changes or

modifications to this equipment may cause

harmful interference unless the modifications

are expressly approved in the instruction man-

ual. The user could lose the authority to oper-

ate this equipment if an unauthorized change

or modification is made.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public perfor-

mance and lending of discs are prohibited.

LASER SAFETY

This unit employs a laser. Only a qualified service

person should remove the cover or attempt to ser-

vice this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUST-

MENTS OR PERFORMANCE OF PROCE-

DURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN AND INTERLOCK

DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK

MECHANISM.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est con-

forme à la norme NMB-003 du Canada.

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC

ÉLECTRIQUES, INTRODUIRE LA LAME LA

PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE

ET POUSSER JUSQU’AU FOND.

PRECAUTIONS

TD253-Body 02.11.28 13:37 Page 4

–

0C28

–

AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

LOCATION

For safe operation and satisfactory performance of

your TV/DVD, keep the following in mind when

selecting a place for its installation:

•

Shield it from direct sunlight and keep it away from

sources of intense heat.

•

Avoid dusty or humid places.

•

Avoid places with insufficient ventilation for proper

heat dissipation. Do not block the ventilation holes at

the top and bottom of the unit. Do not place the unit

on a carpet because this will block the ventilation

holes.

•

Install unit in a horizontal position.

•

Avoid locations subject to strong vibration.

•

Do not place the TV/DVD near strong magnetic fields.

•

Avoid moving TV/DVD to locations where temper-

ature differences are extreme.

•

Do not handle the power cord with wet hands.

•

Do not pull on the power cord when disconnecting

it from an AC wall outlet. Grasp it by the plug.

•

If, by accident, water is spilled on your unit, unplug

the power cord immediately and take the unit to our

Authorized Service Center for servicing.

•

Do not put your fingers or objects into the

TV/DVD disc loading tray.

•

Do not place anything directly on top of the unit.

WARNING

Moisture condensation may occur inside the unit

when it is moved from a cold place to a warm place,

or after heating a cold room or under conditions of

high humidity. If a DVD is played in a TV/DVD

which has moisture, it may damage the DVD and

TV/DVD. Therefore when the condensation occurs

inside the unit, turn the POWER button on and allow

at least 2 hours for the unit to dry out.

The serial number of this product may be found on the back of the unit. No other TV/DVD has the same serial

number as yours. You should record the number and other vital information here and retain this book as a per-

manent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in

accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-

tions concerning chemical wastes.

TD253-Body 02.11.28 13:37 Page 5

–

0C28

–

C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2

C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

AVOID THE HAZARDS OF ELECTRICAL

SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .7

C OPERATING CONTROLS AND FUNCTIONS 8

C PREPARATION FOR USE . . . . . . . . . . . . . . .10

ANTENNA/CABLE CONNECTIONS . . . . . . .10

INSTALLING THE BATTERIES . . . . . . . . . . .12

CONNECTING TO EXTERNAL INPUT JACKS

CONNECTING TO A STEREO SYSTEM (for DVD)

.13

CONNECTING TO AN AMPLIFIER

EQUIPPED WITH DIGITAL INPUT JACKS,

MD DECK OR DAT DECK (for DVD) . . . . . .13

CONNECTING TO A DOLBY DIGITAL

DECODER OR DTS DECODER (for DVD) . .14

TV SECTION

C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .15

LANGUAGE SELECTION . . . . . . . . . . . . . . .15

CHANNEL PRESETTING . . . . . . . . . . . . . . .15

C OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . . .16

WATCHING A TV PROGRAM . . . . . . . . . . . .16

SELECTING THE SLEEP TIMER . . . . . . . . .16

CLOSED CAPTION . . . . . . . . . . . . . . . . . . . .16

PICTURE ADJUSTMENT . . . . . . . . . . . . . . . .17

V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . .18

VD SECTION

C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .20

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .20

DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . .20

SYMBOLS USED IN THIS MANUAL . . . . . .20

C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .21

PLAYING A DVD VIDEO OR AN AUDIO CD

.21

USING THE DVD MENUS . . . . . . . . . . . . . . .21

USING THE TITLE MENU . . . . . . . . . . . . . . .22

PAUSING PLAYBACK OR DISPLAYING

A STILL PICTURE . . . . . . . . . . . . . . . . . . . . .22

RESUMING PLAYBACK FROM THE

POINT WHERE PLAYBACK STOPPED . . . .22

STEPPING THROUGH FRAMES . . . . . . . . . .22

FAST FORWARD/REVERSE . . . . . . . . . . . . .23

SLOW MOTION . . . . . . . . . . . . . . . . . . . . . . .23

STARTING FROM A DESIRED TRACK . . . .23

STARTING FROM A DESIRED TIME COUNT

.23

PLAYING FROM A DESIRED TITLE OR

CHAPTER . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

RANDOM (Audio CD) . . . . . . . . . . . . . . . . . .24

REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . .25

PROGRAM (Audio CD) . . . . . . . . . . . . . . . . .25

C SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . .26

CHANGING THE AUDIO LANGUAGE OR

SOUND MODE . . . . . . . . . . . . . . . . . . . . . . . .26

CHANGING THE SUBTITLE LANGUAGE . .27

CHANGING THE CAMERA ANGLE

(Multi-Angle Pictures) . . . . . . . . . . . . . . . . . . .27

CHANGING THE ON-SCREEN DISPLAY . . .28

C CHANGING THE SETUP ITEMS . . . . . . . . .29

LANGUAGE SETTINGS . . . . . . . . . . . . . . . .29

VIDEO SETTINGS . . . . . . . . . . . . . . . . . . . . .30

AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . .30

PARENTAL LOCK . . . . . . . . . . . . . . . . . . . . .31

OTHER SETTINGS . . . . . . . . . . . . . . . . . . . . .32

C LANGUAGE CODE LIST . . . . . . . . . . . . . . . .33

C TROUBLESHOOTING GUIDE . . . . . . . . . . .34

C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .37

DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .37

C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .38

C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover

TABLE OF CONTENTS

TD253-Body 02.11.28 13:37 Page 6

–

0C28

–

DVD

¡Dolby Digital sound

This player can handle Dolby Digital surround sound

having 5.1 channels when connected to a Dolby Digital

decoder.

¡Still/fast/slow/step playback

Various playback modes are available including still pic-

tures, fast forward/reverse, slow motion and step frames.

¡Random playback for audio CD

This player can shuffle the order of tracks to play them in

random order.

¡Program playback for audio CD

You can program the order of tracks to play them in any

desired order.

¡DVD menus in a desired language

You can display DVD menus in a desired language, if

available on a DVD.

¡Screen saver/Auto power-off functions

The screen saver program starts when there is no input

from the player for five minutes in the stop mode. When

the screen saver program is activated for 30 minutes, the

power is automatically turned off.

¡Subtitles in a desired language

You can select a desired language for the display subtitles,

if that language is available on a disc.

¡Selecting a camera angle

You can select the desired camera angle, if a disc contains

sequences recorded from different angles.

¡Choices for audio language and sound mode

You can select the desired audio language and sound

mode, if different languages and modes are available on a

disc.

¡Tinted, Bright Black Matrix Picture Tube

¡181 Channel Selection

All VHF/UHF channels plus up to 125 cable channels.

¡PLL Frequency Synthesized Tuning

The latest PLL frequency synthesized electronic tuning

system provides free and easy channel selection, and lets

you tune directly to any channel using the channel number

buttons (0~9 and +100-key) on the remote control.

¡On-Screen Function Display.

¡Full-Function Remote Control

¡Sleep Timer

¡Closed Caption Decoder

You may view specially labeled (cc) TV programs,

movies, news, prerecorded tapes, etc. with either a

dialogue caption or text display added to the program.

¡Auto Shut Off Function

If there is no air signal input from the antenna terminal and

no operation for 15 minutes, the TV will turn itself off

automatically.

¡V-CHIP

Enables parents to prevent their children from watching

inappropriate material on TV.

¡Parental lock

You can set the control level to limit playback of discs

which may not be suitable for children.

¡Automatic detection of discs

This player automatically detects if a loaded disc is DVD

or audio CD.

¡On-screen display

Information about the current operation can be displayed

on a TV screen, allowing you to confirm the currently

active functions (such as program playback), on the TV

screen using the remote control.

¡DTS (Digital Theater System)

Sound system different from Dolby Digital sound system

¡Search

Chapter search: Search for the chapter designated by user

is possible.

Title search: Search for the title designated by user is

possible.

Track search: Search for the track designated by user is

possible.

Time search: Search for the time designated by user is

possible.

¡Repeat

Chapter: Repeated playback of the chapter of the

disc being played is possible.

Title: Repeated playback of the title of the disc

being played is possible.

Track: Repeated playback of the track of the disc

being played is possible.

Disc

(audio CD)

: Repeated playback of the entire disc being

played is possible.

A-B: The part between A and B designated by

user is possible.

¡Zoom

4-time magnified screen can be displayed.

¡Marker

The part designated by user can be called back.

¡Resume Play

User can resume to playback from the part at which the

play was stopped.

¡SRS TruSurround

You can enjoy stereophonic virtual space on your existing

stereo system.

¡Bit rate indication

¡Dynamic range control

This unit employs TruSurround system

of SRS Labs, Inc. as virtual

technology.

TruSurround and the symbol are trademarks of

SRS Labs, Inc.

TruSurround technology is incorporated under license

from SRS Labs, Inc.

FEATURES

TD253-Body 02.11.28 13:37 Page 7

–

0C28

–

VOLUME m/n buttons

Press to control the volume level for the DVD and TV.

6.CHANNEL K/L buttons

Press to select memorized channel.

Press to change to TV mode when DVD mode.

7.Remote Sensor Window

8.STOP button

Stops operation of the disc.

9.REV button

Fast reverses playback to a desired point.

10. PLAY button

Starts playback of the disc contents.

Press to change to DVD mode when TV mode.

11. FWD button

Fast forwards playback to a desired point.

12.

PAUSE button

Pauses the current disc operation.

13.

OPEN/CLOSE button

Press to insert discs into or remove them from the

tray.

14. HEADPHONE jack

To connect headphone (not supplied) for personal

listening.

15.

MODE button

Activates program playback or random playback mode.

16. NUMBER button

TV Mode:

Press two digits to directly access the desired

channel.

Remember to press a "0" before a single digit

channel.

+100 button–

Press to select cable channels which are equal or

greater than number 100.

DVD Mode:

Press to enter the desired number.

+10 button–

Press to enter the desired numbers which are

equal or greater than number 10.

7421891011121314653

REV

PLAY

STOP

FWD

ENTER

PAUSE

DISC

RETURNTITLESETUP

REPEATSEARCH MODE

CLEAR

MODE

ANGLESUBTITLEAUDIO

DISPLAY

SKIP

SELECT

POWER PICTURE

OPEN/

CH.

VOL.

MUTEZOOM

SLEEP

123

456

789

0 +10

+100

OPERATING CONTROLS AND FUNCTIONS

TV/DVD FRONT PANEL

REMOTE CONTROL

[Fig. 2]

[Fig. 1]

1.Disc loading tray

2.VIDEO input jack

Connect to the video output jack of a video

camera or VCR.

3.AUDIO L/R input jacks

Connect to the audio output jacks of a video

camera or VCR.

POWER button

Press to turn the power on and off.

TD253-Body 02.11.28 13:37 Page 8

–

0C28

–

AUDIO OUT

DIGITAL OUT

COAXIAL

39 403837

ANT.

Press to accept a setting.

32. Arrow buttons

TV Mode:

Press to select a setting mode from the menu on

the TV screen.

Press to select or adjust from a particular menu.

DVD Mode:

Use when making settings while watching the

display on a TV screen.

33.

DISC MENU button

Displays the menus in the DVD.

34.

SELECT button

Press to change to TV mode, external input mode

or DVD mode.

35.

MUTE button

Press the MUTE button to turn off the sound

portion of the TV program. (Volume level display

turns LIGHT RED from LIGHT BLUE.) Press the

MUTE button again or press the VOL(ume) K or

L button to restore sound.

36.

PICTURE button

Press to enter picture adjustment mode.

37.

Power cord

Connect to a standard AC outlet (120V/60Hz).

NOTE: Remove the power cord from the hook to

avoid breaking a wire before you connect

to a standard AC outlet.

38.

AUDIO L/R output jack

Connect to the analog audio input of an external

amplifier or decoder.

NOTE: The AUDIO output jacks (red/white) on

the rear panel serve to give out DVD

sound, not TV sound and external input

sound.

39.

COAXIAL digital audio out jack

Connect to the digital input of an external

amplifier or decoder.

40.

ANT. in jack

Connect to an antenna, cable system, or satellite

system.

17.

SLEEP button

Press the SLEEP button to display the sleep timer

and start the function. The shut off time can be

determined by the number of times you press the

button. (0, 10, 20, 30,..90, 0 minutes)

18. SKIP buttons

Skip chapters or tracks to a desired point.

19. ZOOM Button

Expands the picture to fill the entire screen.

20.

SETUP button

Press to enter or exit the TV menu or DVD setup

mode.

21.

TITLE button

Displays the title menu.

22. CLEAR button

Resets a setting.

23. DISPLAY button

TV Mode:

Press to display the channel number on the

screen. If you press it again, the channel number

will disappear.

DVD Mode:

Displays the current status on the TV screen for

checking purposes.

24.

SEARCH MODE button

Press to locate a desired point.

25.

AUDIO button

Press to select a desired audio language or sound

mode.

26.

SUBTITLE button

Press to select a desired subtitle language.

27. REPEAT button

Repeats playback of the current disc, title, chapter

or track.

28.

ANGLE button

Press to change the camera angle to see the

sequence being played back from a different angle.

29. A-B REPEAT button

Repeats playback of a selected section.

30. RETURN button

Returns to the previous operation.

31. ENTER button

REAR VIEW

[Fig. 3]

TD253-Body 02.11.28 13:37 Page 9

–

0C28

–

ANTENNA/CABLE CONNECTIONS

VHF/UHF COMBINED ANTENNA

The VHF/UHF Rod Antenna (not supplied) is detachable. Insert the stem of the antenna into the hole on the

upper-back portion of the TV/DVD. Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna

to the ANT. terminal of the TV/DVD as shown in the diagram below. For the best reception, fully extend the

VHF/UHF Rod Antenna and make the necessary adjustments. (Avoid touching the top section when adjusting.)

NOTE:

Before plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent, straighten

the pin as illustrated, then plug the pin into antenna terminal.

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor antenna.

AUDIO OUT

DIGITAL OUT

COAXIAL

ANT.

Bent pin

Cable Plug

(Needs to be straightened)

(Straight pin)

AUDIO OUT

DIGITAL OUT

COAXIAL

ANT.

NOTE:

The connection of an indoor antenna may not always give acceptable TV reception.

[Fig. 4]

[Fig. 5]

Rod Antenna

(Not supplied)

VHF/UHF Antenna

(Not supplied)

VHF/UHF

Combiner

(Not

supplied)

Flat twin-lead cable

UHF Antenna

(Not supplied)

VHF Antenna (Not supplied)

PREPARATION FOR USE

TD253-Body 02.11.28 13:37 Page 10

–

0C28

–

CABLE WITH CONVERTER/

DESCRAMBLER BOX OR SATELLITE BOX

If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic

connection shown here.

AUDIO OUT

DIGITAL OUT

COAXIAL

OUT

ANT.

[Fig. 7]

From Cable System

or Satellite Dish

75-ohm Coaxial

Cable

(Not supplied)

Satellite Box or

Cable Box (Not supplied)

CABLE WITHOUT CONVERTER/

DESCRAMBLER BOX

Use this connection if your cable system connects directly to your TV/DVD without a converter box.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC

that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be

connected to the grounding system of the building as close to the point of cable entry as practical.

AUDIO OUT

DIGITAL OUT

COAXIAL

ANT.

[Fig. 6]

From Cable System

75-ohm Coaxial

Cable (Not

supplied)

TD253-Body 02.11.28 13:37 Page 11

–

0C28

–

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.

2)Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-)

markings.

3)Replace the cover.

Antenna/Cable Connections Continued on the Next Page.

CONNECTING TO EXTERNAL INPUT JACKS

When you watch a program recorded on an another source (VCR or video camera), use the audio/video input

jacks on the front of the TV/DVD.

Connect the audio/video output jacks of another source to the AUDIO L/R and VIDEO jacks of this TV/DVD.

Then press the SELECT button until "VIDEO" appears on the screen.

NOTE:

•

When you connect a monaural VCR (another source) to this TV/DVD, connect the Audio output jack of the

monaural VCR (another source) to the AUDIO L jack of this TV/DVD. The audio will output in both L and

R channel equally.

L-AUDIO-RVIDEO

[Another source]

To the audio

output jacks

Audio/Video

coaxial cable

(not supplied)

etc.

To the video

output jack

[Front of the TV/DVD]

[Fig. 8]

TD253-Body 02.11.28 13:37 Page 12

–

0C28

–

CONNECTING TO A STEREO SYSTEM (for DVD only)

AUDIO OUT

DIGITAL OUT

COAXIAL

ANT.

To Right (red) and Left (white)

AUDIO OUT jacks

(only DVD AUDIO OUT)

Stereo system

To ANALOG AUDIO INPUT jacks

NOTES:

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the

TV/DVD.

•

The AUDIO output jacks (red/white) on the rear panel serve to give out DVD sound, not TV sound and

external input sound.

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL

INPUT JACKS, MD DECK OR DAT DECK (for DVD only)

Use an audio coaxial digital cable (commercially available) for the audio connections.

NOTES:

•

The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital

sound by an MD or DAT deck.

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•

Set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a TV/DVD using

incorrect settings may generate noise distortion, and may also damage the speakers.

•

When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and

you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.

AUDIO OUT

DIGITAL OUT

COAXIAL

ANT.

Amplifier equipped with digital

input jacks, MD deck,

DAT deck, etc.

To COAXIAL DIGITAL

AUDIO INPUT jack

To DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL jack

(only DVD AUDIO OUT)

[Fig. 9]

[Fig. 10]

TD253-Body 02.11.28 13:37 Page 13

–

0C28

–

CONNECTING TO A DOLBY DIGITAL DECODER

OR DTS DECODER (for DVD)

If using this TV/DVD to play back a TV/DVD in a 5.1 channel Dolby Digital surround or DTS surround for-

mat, the TV/DVD outputs a Dolby Digital or DTS data stream from its COAXIAL digital audio out jack. By

hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambi-

ence with powerful and high-quality surround sound of a professional standard such as can be heard in movie

theaters.

Use audio coaxial digital cables (commercially available) for the audio connections.

NOTES:

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•

If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.

•

If connected to a DTS decoder, set DTS to ON for audio output in the setup mode.

•

Unless connected to a Dolby Digital decoder or a DTS decoder, set DOLBY DIGITAL and DTS to OFF for

audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion,

and may also damage the speakers.

•

When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and

you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.

AUDIO OUT

DIGITAL OUT

COAXIAL

ANT.

Front speaker

(left)

Center

speaker

Front speaker

(right)

Surround

speaker

(left)

Surround

speaker

(right)

Subwoofer

To DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL jack

To COAXIAL DIGITAL

AUDIO INPUT jack

Dolby Digital

or DTS decoder

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D

symbol are trademarks of Dolby

Laboratories.

“DTS” and “DTS Digital Out” are trademarks

of Digital Theater Systems, Inc.

[Fig. 11]

TD253-Body 02.11.28 13:37 Page 14

–

0C28

–

LANGUAGE SELECTION

If you want to change the language of the on-screen

menu, follow the procedure below.

Press the SETUP button so that the

setup display appears on the TV

screen.

Press the Arrow K or L button to

point to "LANGUAGE".

Select "ENGLISH", "ESPAÑOL" = Spanish or

"FRANÇAIS" = French by using the Arrow s or B

button.

Press the SETUP button to exit the setup.

NOTE: An on-screen display language must be

selected each for the TV mode and DVD mode.

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

CHANNEL PRESETTING

To preset a channel or to change a preset channel,

follow the procedure below.

Press the SETUP button so that the

setup display appears on the TV

screen.

Press the Arrow K or L button to

point to "CHANNEL SET". Then,

press the Arrow B button.

Press the Arrow K or L button to

point to "AUTO MEMO". Then,

press the Arrow B button.

The tuner scans and memorizes all

active channels in your area.

•

The TV distinguishes between standard TV chan-

nels and cable channels.

•

When AUTO MEMO action is completed, the low-

est memorized channel reappears on the screen.

•

When you press the Arrow K or L button after

selecting AUTO MEMO, the tuner will stop at the

memorized channels only.

•

The TV/VCR may memorize TV channels as

CATV channels if reception conditions are poor. If

this happens, try the AUTO MEMO action again

when reception conditions are better.

[ADD/DELETE FUNCTION]

1)Press the SETUP button so that the setup display

appears on the TV screen.

2)Press the Arrow K or L button

to point to "CHANNEL SET".

Then, press the Arrow B button.

3)Press the Arrow K or L button

to point to "ADD/DELETE".

Then press the Arrow B button.

4)Use the Arrow K or L button to

select the channel you wish to

put into memory or to erase from memory.

NOTE: The display will return to the screen in

about 10 seconds. Perform "ADD/DELETE" func-

tion while this display appears on the screen.

•

Press the Arrow s or B button to light up the

channel number in LIGHT BLUE if you wish to

add the channel into memory.

•

Press the Arrow s or B button to light up the

channel number in LIGHT RED if you wish to

erase the channel from memory.

5)Press the SETUP button to exit the setup.

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

ADD/DELETE

AUTO MEMO

ADD/DELETE

AUTO MEMO

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

Getting started

Connect the power cord to a standard AC outlet.

NOTE: If some digits appear in the corner of the

screen, press the POWER button without unplugging

the power cord.

Press the POWER button to turn on the TV/DVD.

Press the SELECT button on the remote control until

channel number or "TV" appears on the screen.

TV SECTION

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

SET UP FOR USE

TD253-Body 02.11.28 13:37 Page 15

–

0C28

–

WATCHING A TV PROGRAM

Select the desired channel with the CH(annel) K or

L button.

Adjust the volume to the desired listening level using

the VOL(ume) K or L button.

Adjust picture controls for a natural looking image.

(See "PICTURE ADJUSTMENT".)

Note: Suppose that the TV/DVD is shut off or in any

other mode than TV. Press the CHANNEL K or L

button on the TV/DVD, and the TV/DVD will be in

the TV mode to watch television.

SELECTING THE SLEEP TIMER

The sleep timer function enables you to shut off the

power without pressing the POWER button after a

desired time period.

Press the SLEEP button on the remote control.

You may change the sleep time

with pressing the SLEEP button on

the remote control repeatedly. The

timer is set up to 90 minutes, 10

minutes each time the SLEEP button is pushed. (The

timer display counts up and sleep timer will be dis-

played on the screen when you press the SLEEP but-

ton on remote control.)

NOTES:

•

When you disconnect the unit from the AC outlet,

or if you have a power failure, the sleep time will

be lost.

•

When the TV mode is changed to the DVD mode,

the sleep time will be lost.

SLEEP 10

To cancel the sleep timer:

Press the SLEEP button repeatedly until "SLEEP 0"

is displayed.

CLOSED CAPTION

This TV can receive C1 and C2 of Caption and Text.

CAPTION MODE

1)Characters can be displayed on the TV screen when

the received broadcast signal contains the Caption

Signals.

2)Paint-on mode: Displays input characters on the

screen immediately.

Pop-on mode: Once characters are stored in mem-

ory, it is displayed all at once.

Roll-up mode: Displays the characters continuous-

ly by scrolling (max. 4 lines)

NOTE: If the CAPTION C1 or C2 is selected but the

caption signal is not included, characters will not be

displayed.

TEXT MODE

1)Displays the text on the screen by scrolling (max. 7

lines)

2)If the received broadcast signal does not contain

the caption or text signal, no change will occur.

NOTES:

1)When your TV receives a special effects playback

signal (i.e., Search, Slow, Still) from a VCR’s

video output channel (CH3 or CH4), your TV may

not display the correct caption or text.

2)Captions and texts may not match the TV voice

exactly.

3)Interference may cause the closed caption system

not to function properly.

4)The caption or text characters will not be displayed

while the setup display or function’s display is

shown.

OPERATIONS

DEGAUSSING

Magnetism from nearby appliances might affect the

color of the TV picture.

If this happens, move this unit away from the appli-

ance. If the color is still not correct,

disconnect power

cord from AC outlet then reconnect it after 30 minutes.

TD253-Body 02.11.28 13:37 Page 16

–

0C28

–

5)If you see this screen!!

If your TV displays a black box on the screen, this

means that your TV is set to TEXT mode. To clear

screen, select CAPTION C1, C2 or CAPTION

[OFF].

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV programs,

movies, news, prerecorded tapes, etc. with either a

dialogue caption or text display added to the pro-

gram.

Press the SETUP button so that the setup display

appears on the TV screen.

Press the Arrow K or L button to point to "CAP-

TION".

Press the Arrow B or s button to select the mode

you wish.

When done, press the SETUP button to exit the

setup.

: Press the Arrow

B or s

button.

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [ C1]

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [ C2]

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [ T1]

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [ T2]

PICTURE ADJUSTMENT

GAME MODE

Set to the most suitable position for TV GAME.

[B] : ON

[s] : OFF

BRIGHT

Adjust until the whitest parts of the picture are as

bright as you prefer.

[B] : increase brightness

[s] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast.

[B] : increase contrast

[s] : decrease contrast

COLOR

Adjust to be brilliant or pale color.

[B] : be brilliant color

[s] : be pale color

TINT

Adjust to obtain natural skin tones.

[B] : greenish tone

[s] : reddish tone

NOTES:

•

In the above steps, the picture adjustment display

will disappear from the TV screen after about 10

seconds unless you press any buttons, even though

you may not be finished. Press the SETUP and

Arrow B button so that "PICTURE" mode is

selected. Then, press the Arrow K or L button

repeatedly until the display returns to the screen.

•

If you adjust the other Picture control after you set

the Game mode to [ON], the Game mode is set to

[OFF] automatically. If you want to set the Game

mode, reset it to [ON].

[ ]

GAME MODE

[ ]

OFF ON

[ ]

BRIGHT

[ ]

CONTRAST

[ ]

COLOR

[ ]

TINT

[ ]

: Press the Arrow ▲ or ▼ button.

Press the PICTURE button.

Select the feature you wish to adjust with the Arrow

K or L button and adjust it with the Arrow B or s

button.

TD253-Body 02.11.28 13:37 Page 17

–

0C28

–

V-CHIP SET UP

V-CHIP enables parents to prevent their children

from watching inappropriate material on TV.

V-CHIP reads the ratings for programming (except

for news and sports programs, unedited movies on

premium cable channels, and Emergency Broadcast

System signals), then denies access to programming

if the program's rating meets the limitations you

select. In this case, "PROTECTED PROGRAM by

..." message appears on the TV screen. You can

watch the protected program by entering access code

(default 0000).

To block ratings, follow the steps below.

•

Programming may be rated by the Motion Picture

Association of America (MPAA) or according to

the Television Parental Guidelines. In order to

block any inappropriate programming, set your

limits in both places (MPAA RATING and TV

RATING).

•

You cannot access the menu when the "PROTECT-

ED PROGRAM by ..." message appears. In this

case, change to the unblocked channel, then press

the SETUP button.

[MPAA RATING SET UP]

Press the SETUP button so that the setup display

appears on the TV screen.

Press the Arrow K or L button to

point to "V-CHIP SET UP". Then,

press the Arrow B button.

Use the number buttons to enter 4-

digit access code. The default code

is 0000.

Press the Arrow K or L button to

point to "MPAA RATING". Then,

press the Arrow B button.

Press the Arrow K or L button to

point to your desired item.

Then, press the Arrow B button to

select [BLOCK] or [VIEW].

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

TV RATING

MPAA RATING

CHANGE CODE

•

When you select the rating category and turn it

[BLOCK], the higher rating will turn [BLOCK]

automatically. Also, the lower rating will turn

[VIEW] automatically.

•

When you turn "G" to [BLOCK] or [VIEW], the

all ratings will turn to [BLOCK] or [VIEW] auto-

matically.

•

When you turn "X" to [VIEW], the all ratings will

turn to [VIEW] automatically.

Press the SETUP button to exit the setup.

[TV RATING SET UP]

Press the SETUP button so that the setup display

appears on the TV screen.

Press the Arrow K or L button to

point to "V-CHIP SET UP". Then,

press the Arrow B button.

Use the number buttons to enter 4-

digit access code. The default code

is 0000.

Press the Arrow K or L button to

point to "TV RATING". Then,

press the Arrow B button.

Press the Arrow K or L button to

point to your desired item. Then,

press the Arrow B button to select

[BLOCK] or [VIEW].

• G: General Audience

• PG: Parental Guidance suggested.

• PG-13: Unsuitable for children under 13

• R: Restricted; under 17 requires

accompanying parent or adult

guardian

• NC-17: No one under 17 admitted

• X: Mature audience only

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

ACCESS CODE

- - - -

TV RATING

MPAA RATING

CHANGE CODE

G [VIEW]

[VIEW]

PG-13

[VIEW]

[BLOCK]

NC-17

[BLOCK]

ACCESS CODE

- - - -

TV-Y

[VIEW]

TV-Y7 ( )

[VIEW]

TV-G

[VIEW]

TV-PG

( )

[VIEW]

TV-14

( )

[VIEW]

TV-MA ( )

[VIEW]

TD253-Body 02.11.28 13:37 Page 18

–

0C28

–

•

When you select the rating category and turn it

[BLOCK], the higher rating will turn [BLOCK]

automatically. Also, the lower rating will turn

[VIEW] automatically.

•

When you turn "TV-Y" to [BLOCK] or [VIEW],

the all ratings will turn to [BLOCK] or [VIEW]

automatically.

•

When you turn "TV-MA" to [VIEW], the all rat-

ings will turn to [VIEW] automatically.

When you select TV-Y7, TV-PG, TV-14, or TV-MA

and you press the Arrow B button, the sub-ratings

will appear on the TV screen.

If you select the rating category (example: TV-PG)

and turn it [BLOCK] or [VIEW], the sub-ratings

(example: V for Violence) will turn [BLOCK] or

[VIEW] automatically.

You can set the sub-ratings to [BLOCK] or [VIEW]

individually when the rating category is set to

[BLOCK]. To set the sub-ratings individually, follow

the steps below.

•

When you select [TV-Y7]:

Press the Arrow K or L button

to select "FV" (Fantasy

Violence). Then, press the Arrow

B button to select [BLOCK] or

[VIEW].

•

When you select [TV-PG],

[TV-14] or [TV-MA]:

Press the Arrow K or L button

to select "D"(Suggestive

Dialog), "L"(Coarse Language),

"S"(Sexual Situation), or

"V"(Violence). Then, press the

Arrow B button to select [BLOCK] or [VIEW].

NOTE: When you select [TV-MA], "D" does not

appear on the TV screen.

•

The sub-ratings which set to [BLOCK] appears

next to the rating category in the TV RATING

menu.

Press the SETUP button to exit the setup.

• TV-Y: Appropriate for all children

• TV-Y7: Appropriate for children seven and

older

• TV-G: General Audience

• TV-PG: Parental Guidance suggested.

• TV-14: Unsuitable for children under 14

• TV-MA: Mature audience only

TV-Y7

[BLOCK]

TV-PG

[BLOCK]

TV-Y

[VIEW]

TV-Y7 (

)

[VIEW]

TV-G

[BLOCK]

TV-PG

(DLSV)

[BLOCK]

TV-14

(DLSV)

[BLOCK]

TV-MA (

LSV)

[BLOCK]

[CHANGE ACCESS CODE]

To change access code, follow the steps.

Press the SETUP button so that the setup display

appears on the TV screen.

Press the Arrow K or L button to

point to "V-CHIP SET UP". Then,

press the Arrow B button.

Use the number buttons to enter 4-

digit access code. The default code

is 0000.

Press the Arrow K or L button to

point to "CHANGE CODE". Then,

press the Arrow B button.

Use the number buttons to enter

your desired access code in the

NEW CODE space. Then enter the

same code in the CONFIRM

CODE space. V-CHIP SET UP

screen appear on the screen.

•

If you enter wrong code, repeat

step 5, making sure you enter

the same new code exactly in

the confirm code space.

Press the SETUP button to exit the setup.

Note:

•

If you unplug the power code or power failure

occures, the changed access code will be lost and

will return to default (0000). Change your access

code again as necessary.

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

ACCESS CODE

- - - -

TV RATING

MPAA RATING

CHANGE CODE

NEW CODE

CONFIRM CODE

- - - -

NEW CODE

CONFIRM CODE

x x x x

- - - -

TD253-Body 02.11.28 13:37 Page 19

–

0C28

–

ABOUT THE DISCS

The following discs can be played back on this DVD

player.

This player conforms to the NTSC color system. You can-

not play discs recorded in other color systems such as

PAL or SECAM.

¡Some discs include region codes as shown below.

¡The number inside the symbol refers to a region of the

world, and a disc encoded in a specific region format

can only be played back on DVD players with the same

region code.

The following discs cannot be played back on this

DVD player.

DVD with region codes other than 1 or ALL.

DVD-ROM

DVD-RAM (Never play back, otherwise mal-

function may result.)

CD-ROM

VSD

CDV (Only plays back the audio part.)

CD-G (Only plays back the sound.)

CD-R

(Never play back, otherwise malfunction may

result.)

CD-I

(Never play back, otherwise malfunction may

result.)

Photo CD

(Never play back, otherwise malfunction may

result.)

Video CD

(Never play back, otherwise malfunction may

result.)

Any other discs without compatibility indications

PLAYABLE DISCS

DVD

Video

12 cm

Approx. 4 h

(single-sided)

Approx. 8 h

(double-sided)

Approx. 80 min

(single-sided)

Approx. 160 min

(double-sided)

20 min

8 cm

(singles)

Logo

Maximum

Playback Time

ContentsDisc Type

Sound

and

Pictures

Audio

Disc Size

Sound

74 min

[

DVD

]

Data on a DVD is divided into sections called "titles", and

then into subsections called "chapters", each of which is

given a title or chapter number. Playback conditions are

preset on some DVD video discs, and these playback con-

ditions take priority over user operations on this player. If

a function you selected do not run as desired, refer to the

manual accompanying the disc.

DISC TYPES

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1 Chapter 2Chapter 3 Chapter 4

[

AUDIO CD

]

Data on an audio CD is divided into sections called

“tracks”, each of which is given a track number.

Example

Track 1 Track 2 Track 3 Track 4 Track 5 Track 6

DVD SECTION

TD253-Body 02.11.28 13:37 Page 20

–

0C28

–

––

–

PLAYING A DVD VIDEO

OR AN AUDIO CD

Getting started

Turn on the power of the TV/DVD, amplifier and any

other components.

1 Press the POWER button.

The power will turn on.

2 Press the OPEN/CLOSE button.

The disc loading tray will open.

3 Place a disc into the tray.

Make sure the disc is sitting properly in the correct

recess, with the label side up.

4 Press the PLAY button.

¡The tray will close automatically, and playback will

then start from the first chapter or track of the disc.

You need to press the PLAY button only when the

tray has been closed by pressing the OPEN/CLOSE

button.

¡When you play back the DVD which a title menu is

recorded, the menu may appear on the screen. In this

case, refer to “USING THE TITLE MENU”.

5 Press the STOP button to stop play.

CDDVD

Notes

¡When the DVD mode has been switched to the TV

mode, the DVD mode shut down first and then TV

picture and sound appears in about 4 seconds.

Similarly, when the POWER button is pressed off in

the DVD mode, this mode shut down first and then

the set’s power is turned off.

¡A “prohibited icon” may appear at

the top-right on the TV screen

during operation, warning that a

prohibited operation has been

encountered by the DVD player

or the disc.

¡If a disc is dirty or has scratches, the pictures may

appear distorted and the playback operation may

stop. In such cases, clean the disc and unplug the

power cord and then plug it again before resuming

playback.

¡With DVDs that use some titles for playback

program signals, playback may start from the second

title, or it may skip these titles.

PLAYING A DISC

USING THE DVD MENUS

Some DVDs contain their own menus, such as a

guidance menu which describes the contents of the

disc or a selection menu for sound, language and other

customized settings.

1 Press the DISC MENU button.

¡The DVD menu will appear.

2 Select the desired title.

Press the arrow buttons (L/K/B/s) to change the

setting, and then press the ENTER button.

3 Playback will start from the selected title.

DVD

TD253-Body 02.11.28 13:37 Page 21

–

0C28

–

––

–

USING THE TITLE MENU

With a DVD containing a title menu, you can select

desired titles from the menu.

1 Press the TITLE button.

The title menu will appear.

2 Select the desired title.

Press the arrow buttons (L/K/B/s) to change the

setting, and then press the ENTER button.

CALLING UP A MENU SCREEN

DURING PLAYBACK

For DVDs

¡Press the DISC MENU button to call up the DVD

menu.

¡Press the TITLE button to call up the title menu.

Note

¡Contents of menus and corresponding menu

operations may vary between discs. Refer to the

manual accompanying the disc for details.

DVD

PAUSING PLAYBACK OR

DISPLAYING A STILL PICTURE

1 Press the PAUSE button during playback.

Playback will pause, with sound

muted.

2 Press the PLAY button to resume playback.

CDDVD

Pause F

Play B

STEPPING THROUGH FRAMES

1 Press the PAUSE button while playback is

paused.

The next picture frame is dis-

played with sound muted each

time the button is pressed.

2 Press the PLAY button to resume playback.

DVD

Pause F

Play B

RESUMING PLAYBACK FROM

THE POINT WHERE

PLAYBACK STOPPED

1 Press the STOP button during playback.

Playback will stop, and then

appear the resuming message at

the center.

2 Press the PLAY button. Playback will start

from the point where the previous playback

session was stopped.

Notes

¡Resuming playback is not available with some discs.

¡If you switch to the TV mode during DVD playback,

the resuming

¡It is possible to switch from the DVD play mode to

the TV mode. Even if the power is turned off, the

resume function enables to playback on from the

previously interrupted point. But note that the

Marker commands are not saved.

¡The resume function can be reset by pressing the

STOP button twice or by opening the disc loading

tray.

CDDVD

Press 'PLAY' to play from here

To play beginning, press 'STOP' first

and the 'PLAY'.

Play B

TD253-Body 02.11.28 13:37 Page 22

–

0C28

–

––

–

FAST FORWARD/REVERSE

1 Press the FWD g or REV h button dur-

ing playback.

For DVDs, pressing the FWD g or REV h

button cycles the playback speed in three steps.

¡For audio CDs, the playback speed is ×16 fixed.

2 Press the PLAY button to return to normal

playback speed.

CDDVD

1 Press the numeric buttons to enter the

desired track number.

The selected track will be located, and playback will start.

You can also press the SEARCH MODE button, use

the numeric buttons to enter the track number, when

the track number is entered in the

entry box, playback of the desired

track will start automatically.

Ex2

Ex8

Ex32 Ex32

Dx8

Dx2

REV Button Button

FWD

SLOW MOTION

1 Press the FWD g button while playback is

paused. (Sound remains muted.)

Slow motion mode will be activated.

¡Pressing the FWD g button cycles the playback

speed in three steps. Select an appropriate speed

while referring to the speed indication on the screen.

2 Press the PLAY button to return to normal

playback speed.

Notes

¡Slow playback is not available with audio CDs.

¡The reverse of slow playback is not available.

DVD

×1/16

×1/8

×1/2

Button

FWD

STARTING FROM A DESIRED

TRACK

TRICKS WITH THE SKIP BUTTONS (H, G)

If the SKIP button G is pressed during playback or

while playback is paused, the current track is

skipped and the next track is played. When the SKIP

button H is pressed once, the top of the current

track is located for replaying. When the SKIP button

H is pressed again while Within 2-second

playback, the previous track is located.

STARTING FROM A DESIRED

TIME COUNT

1 Press the SEARCH MODE button.

Press the button twice for DVDs

or two times for audio CDs.

2 Press the numeric buttons to set the desired

time count.

¡Example: 1 hour, 23 minutes and

30 seconds

1 → 2 → 3 → 3 → 0

Notes

¡In the case of DVD, Time Search in Title is effec-

tive. (But Time Search in Chapter is ineffective.)

¡In the case of CD, Time Search in Track is effective.

(But Time Search in the entire disc is ineffective.)

¡Playback from a desired time count is not available

with some discs.

¡Specific time playback is not available with some

discs or if the unit is in stop mode.

CDDVD

Time _:__:__

Total Time 1:29:00

Time _:__:__

Total Time 1:29:00

Track: __ / 26

TD253-Body 02.11.28 13:37 Page 23

–

0C28

–

––

–

PLAYING FROM A DESIRED

TITLE OR CHAPTER

You can also press the SEARCH MODE button, use

the numeric buttons to enter the chapter number.

Perform the title search and the

chapter search after setting them on

the same screen at the same time.

Changeover by

K/L

buttons.

Note

¡Playback from a desired title or

chapter is not available with some

DVDs.

DVD

Title : 1 / 4

Chapter:__ / 17

Title : 1 / 4

Chapter:__ / 17

Title : 1 / 4

Chapter:__ / 17

RANDOM (Audio CD)

1 Press the MODE button in stop mode.

The program setting menu screen will appear.

2 Press the MODE button again.

3 Press the PLAY button. Random playback

will then start.

Note

¡Program playback is not available during random

playback.

Audio CD

Random

Exit : MODEStart : PLAY

REPEAT

1 Press the REPEAT button.

For DVDs

¡A single title or chapter is played back repeatedly.

¡Pressing the REPEAT button cycles the display on

the screen as follows.

For audio CDs

¡The whole disc or a single track is played back

repeatedly.

¡Pressing the REPEAT button cycles the display on

the screen through All, Repeat Track and Off.

CDDVD

Repeat

[Title]

Repeat

[Chapter]

Repeat

[Off]

The current Title is

played back repeatedly.

The current Chapter is

played back repeatedly.

No repeat playback.

Repeat

[Off]

Repeat

[Track]

The current Track is

played back repeatedly.

The whole Disc is

played back repeatedly.

No repeat playback.

Repeat

[All]

If the REPEAT button is pressed once dur-

ing program/random playback, the pro-

gram/random playback is performed

repeatedly.

If the REPEAT button is pressed again, the

current track is played back repeatedly.

Notes

¡Repeat playback is not available with some discs.

¡The REPEAT setting will be cleared when moving

to other title, chapter or track.

TD253-Body 02.11.28 13:37 Page 24

–

0C28

–

––

–

A-B REPEAT

You can define a section to be played back repeatedly.

Press the A-B REPEAT button during playback.

¡The starting point (A) will then be

selected.

2 Press the A-B REPEAT button again at the

end point (B) of the desired section.

The selected section will be

played back repeatedly.

3 To exit A-B repeat playback, press the A-B

REPEAT button and set it to OFF.

Notes

¡With DVDs, the A-B repeat section can be set only

within the current title.

¡With audio CDs, the A-B repeat section can be set

within the current track.

¡A-B repeat is not available with some scenes in

DVD.

¡To cancel the A point which was set, press RETURN

button.

CDDVD

Repeat

[ A - ]

PROGRAM (Audio CD)

Press the MODE button in stop mode.

¡The program screen will appear.

Audio CD

Program

Total

[Track]

– –

[Time]

0:00:00

Random

: MODE

Track 00 / 15

Exit

: RETURN

Start : PLAY

Delete

: CLEAR

Repeat

[ A - B ]

Repeat

[ off ]

2 Press the numeric buttons to enter the

desired track numbers.

The total playback time for the

selected tracks will appear on the

TOTAL line.

3 Press the PLAY button.

Playback will start in the programmed order.

¡While the program is being played back, the STOP

button works as follows.

¡Press the STOP button once and then the PLAY

button again, playback will restart from the point

where the STOP button was pressed. (Program

continued)

¡Press the STOP button twice and then the PLAY

button again, playback will restart from the first tune

in the program in the usual way. (Program

continued)

¡Press the STOP button three times and then the

PLAY button again, playback will restart from the

track in the usual way. (Program cleared)

Notes

¡Adding programs is not possible during program

playback. You must stop the current playback before

such operations can be carried out.

¡Press the CLEAR button to cancel a program. The

most recently entered program will then be deleted.

¡Numbers which exceed the number of tracks on the

disc in the tray are not accepted.

¡Playback from a desired track and random playback

are not available during program playback.

¡Program settings are cleared when the power is

turned off or the disc loading tray is opened.

¡If the track no. is once set in the program, the setting

cannot be changed.

02 05 07 14 01 09 13 10 03 11

08 04

Audio CD

Program

Total

[Track]

[Time]

0:47:29

Random

: MODE

Track 04 / 15

Exit

: RETURN

Start : PLAY

Delete

: CLEAR

TD253-Body 02.11.28 13:37 Page 25

–

0C28

–

––

–

ZOOM PLAYBACK

(enlargement onscreen)

Images can be enlarged four times on the screen to

your taste.

Press the ZOOM button during playback.

An image will be enlarged at the center of the

screen.

¡Press the ZOOM button again, and the image will be

back to the previous size.

DVD

SETTINGS

CHANGING THE AUDIO

LANGUAGE OR SOUND MODE

The DVD player has a function which allows you to

select the desired audio language and sound mode.

For DVDs

Press the AUDIO button during playback, and then

press the AUDIO button to select the desired audio

language.

The audio language can be changed if multiple

languages are recorded on the DVD being played.

DVD

Notes

¡Pressing the Audio button may not work on some

DVDs with multiple audio languages (e.g. DVDs

which allow audio language setting on the disc

menu). Operation varies between discs, so refer to

the manual accompanying the disc.

¡If a desired language is not shown after pressing the

Audio button several times, the disc does not have

an audio source in that language.

¡The audio language resets to the one which has been

selected in the setup mode, every time the power is

turned on or discs are replaced. If that language is

not available on a disc, a language defined by the

disc is selected.

¡The screen display will disappear after about 5

seconds.

Audio 1 , English

Audio 2 , French

Audio 8 , Japanese

HELLO

Bonjour

Zoom [on]

When the cursor (K/L/s / B) button is pressed

during zoom play, the part to be zoomed moves.

¡The zooming frame can be moved from the center

.... 4 steps to the right. 4 steps to the left. 4 steps to

the top. 4 steps to the bottom.

Note

¡Zooming function does not work while operation

display screen is shown.

TD253-Body 02.11.28 13:37 Page 26

–

0C28

–

––

–

CHANGING THE SUBTITLE

LANGUAGE

The DVD player has a function which allows you to

select the desired language for subtitles.

Press the SUBTITLE button during playback, and

then press the SUBTITLE button to select the

desired subtitle language.

The subtitle language can be changed if the subtitles

are recorded in multiple languages on the DVD

being played.

¡The subtitle language cannot be changed if the

subtitles are recorded in a single language on the

DVD being played.

¡Pressing the SUBTITLE button cycles the subtitle

language from SUBTITLE 1, SUBTITLE 2 and all

the languages recorded through to off.

Notes

¡Some discs allow subtitle language setting on the

disc menu. (Operation varies between discs, so refer

to the manual accompanying the disc.)

¡If the desired language is not shown after pressing

the SUBTITLE button several times, the disc does

not have subtitles in that language.

¡The subtitle language resets to the one which has

been selected in the setup mode, every time the

power is turned on or discs are replaced. If that

language is not available on a disc, a language

defined by the disc is selected.

¡It may take time to display the subtitles in the

selected language.

¡The screen display will disappear after about 5

seconds.

¡When “Subtitle Not Available” appears onscreen, it

means no subtitle is recorded on the scene.

DVD

CHANGING THE CAMERA

ANGLE (Multi-Angle Pictures)

The DVD player has a function which allows you to

select the desired camera angle.

Press the ANGLE button during playback.

¡If the disc contains sequences recorded from differ-

ent camera angles, the angle icon ( ) will appear

at the top-right of the screen. You can change the

camera angle when the icon appears on the screen.

¡The camera angle cannot be changed if the disc does

not contain sequences recorded from different

camera angles.

Press the ANGLE button while the angle

number is shown on the screen.

Note

¡The screen display will disappear after about 5

seconds.

DVD

Subtitle 1

No subtitles

Subtitle 2

Subtitle 1 , English

Subtitle 2 , French

Subtitle Off

Angle 1

Angle 2

Angle 8

Angle 1 / 8

Angle 2 / 8

Angle 8 / 8

HELLO

Bonjour

TD253-Body 02.11.28 13:37 Page 27

–

0C28

–

––

–

CHANGING THE ON-SCREEN

DISPLAY

DVD

Play

Repeat

[Chapter]

Title

Chapter

Time

0:17:52

-1:38:46

Bit Rate

Chapter 18 / 30

Title 1 / 5

Time 1:56:38

Audio 1.English / 4

•

Picture in play back

Playback Setup Window

Info. Window

Elapsed time of the current title and

Remaining time of the current title.

Current chapter number

Current title number

Current repeat status

Current playback status

Kind of disc in playbacking

Audio CD

Play

Repeat

[Track]

Track

Play Mode

Normal

Time

[Track]

0:01:46

-0:03:27

Track 2 / 12

Time 0:05:13

Maker ...

Time Display Track

01 02 03 04 05 06 07 08 09 10

11 12

Playback Setup Window

[Track]

Elapsed time of the current track and

Remaining time of the current track.

[All]

Elapsed time of the current disc and

Remaining time of the current disc.

Current track number

Nomal playback

Programedplayback

Random playback

Current repeat status

Current playback status

Kind of disc in playbacking

Info. Window

Playback Setup Window (DVD)

Playback Setup Window (CD)

To exit the display (DVD and CD):

Press the RETURN button.

In the playback Setup Window, press the RETURN button to

change the present indication to the former one.

ITEM DISPLAY CONTENTS

Time Total time of the current title

SRS

TruSurround

The current setting (On/Off) is displayed.

Marker

Place the cursor and press the ENTER

button to activate the Marker function.

[Set the marker]

Using

button, position the cursor on

to the marker number shown as “Not

Set”. Press the ENTER button when the

screen to be reviewed appears.

Up to 5 points can be marked.

[Call back the marker]

Using

button, position the cursor on

to the marker number to be called back

and press the ENTER button.

[Clear the marker]

Using

button, position the cursor on

to the marker number to be cleared and

press the CLEAR button.

To clear all markers, place the cursor on

“All Clear Markers” and press the

ENTER button.

Chapter

Current chapter number / the number of

total chapters

Title

Current title number / the number of total

titles

Audio

Audio No., audio language / the number

of available audio languages in the disc

Subtitle

Subtitle No., subtitle language / the

number of available subtitle languages in

the disc

Off : Subtitle is not displays.

Not Available : Subtitle is not included.

Angle

Angle No. / total number of the angles

1/1 : Multi angle is not included in the

disc.

ITEM DISPLAY CONTENTS

Time Total time of the current track

Marker

Place the cursor and press the ENTER

button to activate the Marker function.

[Set the marker]

Using

button, position the cursor on

to the marker number shown as “Not

Set”. Press the ENTER button when the

screen to be reviewed appears.

Up to 5 points can be marked.

[Call back the marker]

Using

button, position the cursor on

to the marker number to be called back

and press the ENTER button.

[Clear the marker]

Using

button, position the cursor on

to the marker number to be cleared and

press the CLEAR button.

To clear all markers, place the cursor on

“All Clear Markers” and press the

ENTER button.

Track

Current track number / the number of

total tracks

Time Display

The time informations displays on the left

side of the screen (Track/All)

For DVDs

You can check the information about the disc by

pressing the DISPLAY button on the remote control.

For audio CDs and DVDs

Press the DISPLAY button, the display appears on the

screen.

For the selecting the item of the Playback Setup

Window, press the K

button to select the item,

then press the ENTER button.

For audio CDs

CDDVD

TD253-Body 02.11.28 13:37 Page 28

–

0C28

–

––

–

Press the SETUP button.

¡The setup screen appears.

2 Press the K/L buttons to select Language,

and then press the ENTER button.

3 Press the K/L buttons to select an item, and

then press the ENTER button.

(Voice is played back in selected

language.)

(Subtitles are shown in selected

language.)

(The disc menu appears in select-

ed language.)

(The on-screen display appears in

selected language.)

Press the

K/L

buttons to select a desired item,

and then press the ENTER button.

¡If Other is selected on the Audio, Subtitle or Disc

Menu setting screen, the Language Code setting

screen will appear. Press the numeric buttons to

enter the desired language code while referring to

the list on page 25.

5 Press the SETUP button.

The setup mode will be canceled and the ordinary

screen will appear.

Note

¡Language Setting for Audio and Subtitle is not avail-

able with some discs. Then use the Audio and

Subtitle button. Details are on pages 18 and 19.

Note

¡When you change the setup items, press the STOP

button if you are in playback mode.

CHANGING THE SETUP ITEMS

LANGUAGE SETTINGS

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

Language Controls

Audio English

Subtitle English

Disc Menu English

Player Menu English

Select : / Set : ENTER

Cancel : Exit : SETUP

Language

Display

Audio

Parental

Audio

Irish

Portuguese

Dutch

Other

.......

Language Controls

Audio English

Subtitle English

Disc Menu English

Player Menu English

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

Language Controls

Audio English

Subtitle English

Disc Menu English

Player Menu English

Audio

Original

English

French

Spanish

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

Language Controls

Audio English

Subtitle English

Disc Menu English

Player Menu English

Subtitle

Off

English

Spanish

French

Select : / Set : ENTER

Cancel : Exit : SETUP

Language

Display

Audio

Parental

Language Controls

Audio English

Subtitle English

Disc Menu English

Player Menu English

Disc Menus

Original

English

French

Spanish

Select : / Set : ENTER

Cancel : Exit : SETUP

Language

Display

Audio

Parental

Language Controls

Audio English

Subtitle English

Disc Menu English

Player Menu English

Player Menu

English

Français

Español

Select : / Set : ENTER

Cancel : Exit : SETUP

Language

Display

Audio

Parental

TD253-Body 02.11.28 13:37 Page 29

–

0C28

–

––

–

Press the

K/L

buttons to select a desired item,

and then press the ENTER button.

5 Press the SETUP button.

The setup mode will be canceled and the ordinary

screen will appear.

Press the SETUP button.

¡The setup screen will appear.

2 Press the K/L buttons to select Display and

then press the ENTER button.

3 Press the K/L buttons to select an item, and

then press the ENTER button.

TV Aspect

(Default : 4:3 Pan & Scan)

4:3 Pan & Scan : Full height picture,

trimmed both sides

4:3 Letter Box : Wide screen with

black bars on top and bottom

Notes

• Some discs do not contain pan and scan images.

• Some discs do not contain letter box images.

On Screen Info (Default : On)

Display or not display the disc status

(Example “PLAYB”).

Angle Icon (Default : On)

Display or not display the Angle icon

on the screen.

Background Color (Default : Gray)

Select gray or blue

Auto Power Off (Default : On)

Set or not set to turn off after the

screen saver is started and no keys are

pressed for 30 minutes..

DISPLAY SETTINGS

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

Display Controls

TV Aspect 4:3 Pan & Scan

On Screen Info

Panel Display Bright

Angle Icon On

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

Display Controls

TV Aspect 4:3 Pan & Scan

On Screen Info

Angle Icon On

Background Color

Gray

TV Aspect

4:3 Pan & Scan

4:3 Letterbox

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

Display Controls

TV Aspect 4:3 Pan & Scan

On Screen Info

Angle Icon On

Background Color

Gray

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

Display Controls

TV Aspect 4:3 Pan & Scan

On Screen Info

Angle Icon On

Background Color

Gray

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

Display Controls

On Screen Info On

Angle Icon On

Background Color

Gray

Auto Power Off On

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

Display Controls

On Screen Info On

Angle Icon On

Background Color Blue

Auto Power Off On

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

TD253-Body 02.11.28 13:37 Page 30

–

0C28

–

––

–

Down Sampling (Default :

48kHz)

Set the output for the DVD

recorded in PCM 96kHz (96kHz

or 48kHz)

Press the

K/L

buttons to select a desired item,

and then press the ENTER button.

¡If PCM, Dolby Digital or DTS MPEG is selected on

the Digital Audio Out setting screen, press the K/L

buttons again to select a further item, and then press

the ENTER button.

Dolby Digital (Default : Off)

On : Output by Dolby Digital.

Set to On when the unit is con-

nected to Dolby Digital Decoder.

DTS (Default : Off)

On : Output DTS sound

Set to On when the unit is con-

nected to DTS Decoder.

MPEG (Default : Off)

On : Output by MPEG

Off : Convert the MPEG to PCM

Set to On when the unit is con-

nected to MPEG2 Decoder.

Press the SETUP button.

¡The setup mode will be canceled and the ordinary

screen will appear.

Press the SETUP button.

¡The setup screen will appear.

2 Press the K/L buttons to select Audio and

then press the ENTER button.

3 Press the K/L buttons to select an item, and

then press the ENTER button.

Digital audio out setting (Next

step)

Dynamic Range (Default : Off)

On : Dynamic range is available

¡This function is for controlling

the range of sound volume. By

compressing the range of sound

volume, it is possible not only to

suppress the output of loud

sound at night and but also to

raise the volume of low sound.

¡However, this function is effec-

tive only for the sound recorded

by Dolby Digital recording.

When the sound recorded by

Dolby Digital 5.1ch is outputted,

the sound is compressed auto-

matically even with this function

being set at “Off”.

Downmix Mode

(Default : Dolby Surround)

Dolby Surround: When the player

is connected to an audio compo-

nent that conforms to

Dolby Surround Pro Logic

STEREO: When the player is con-

nected to a normal audio compo-

nent

AUDIO SETTINGS

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

Audio Controls

Digital Audio Out ...

Dynamic Range On

Downmix Mode Dolby Surround

Down Sampling 48kHz

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

Audio Controls

Digital Audio Out ...

Dynamic Range On

Downmix Mode Dolby Surround

Down Sampling 48kHz

Digital Audio Out

Dolby Digital Off

DTS On

MPEG Off

Select : / Set : ENTER

Cancel : Exit : SETUP

Language

Display

Audio

Parental

Audio Controls

Digital Audio Out ...

Dynamic Range On

Downmix Mode Dolby Surround

Down Sampling 48kHz

SSelect : / Set : ENTER

Cancel : Exit : SETUP

Language

Display

Audio

Parental

Audio Controls

Digital Audio Out ...

Dynamic Range On

Downmix Mode Dolby Surround

Down Sampling 48kHz

Select : / Set : ENTER

Cancel : Exit : SETUP

Language

Display

Audio

Parental

Audio Controls

Digital Audio Out ...

Dynamic Range On

Downmix Mode Dolby Surround

Down Sampling 48kHz

Digital Audio Out

Dolby Digital Off

DTS On

MPEG Off

Select : / Set : ENTER

Cancel : Exit : SETUP

Language

Display

Audio

Parental

Audio Controls

Digital Audio Out ...

Dynamic Range On

Downmix Mode Dolby Surround

Down Sampling 48kHz

Digital Audio Out

Dolby Digital Off

DTS On

MPEG Off

Select : / Set : ENTER

Cancel : Exit : SETUP

Language

Display

Audio

Parental

Audio Controls

Digital Audio Out ...

Dynamic Range On

Downmix Mode Dolby Surround

Down Sampling 48kHz

Digital Audio Out

Dolby Digital Off

DTS On

MPEG Off

Select : / Set : ENTER

Cancel : Exit : SETUP

Language

Display

Audio

Parental

Audio Controls

Digital Audio Out ...

Dynamic Range On

Downmix Mode Dolby Surround

Down Sampling 48kHz

Select : / Set : ENTER

Cancel : Exit : SETUP

Language

Display

Audio

Parental

TD253-Body 02.11.28 13:37 Page 31

–

0C28

–

––

–

CONTROL LEVELS

Level 8

DVD software of any grade (adult/general/children)

can be played back.

Levels 7 to 2

Only DVD software intended for general use and

children can be played back.

Level 1

Only DVD software intended for children can be

played back, with those intended for adult and

general use prohibited.

Notes

¡With some DVDs, it may be difficult to find if they

are compatible with parental lock. Be sure to check

if the parental lock function operates in the way that

you have set.

¡Record the password in case you forget it.

IF YOU FORGET THE PASSWORD

1) Open the tray.

2) Press the 1, 2, 3, 4, then DISPLAY button on the

remote control. the default setup screen will appear.

Then, press the ENTER button.

3) Disconnect the power once and reconnect, then

proceed the step 1 to 4 of the PARENTAL LOCK

again.

Note: If you proceed the above steps, ALL the

settings of the DVD player will be cleared. To use

the DVD player under the previous settings, set

each setting item all over again.

Press the SETUP button.

¡The setup screen will appear.

2 Press the K/L buttons to select Parental,

and then press the ENTER button.

3 Press the numeric buttons to enter the 4-

digit password, and then press the ENTER

button.

When doing this for the first time, enter any 4 digits.

That number will be used as the password from the

second time onward.

¡By entering the password, you

can then change the control level

and password settings.

Press the

K/L

buttons to select an item, and

then press the ENTER button.

When Parental Level is selected

¡Press the K/L buttons to select an item from 8 to 1

and then press the ENTER button.

¡When Change is selected, press the numeric buttons

to enter the four digits password. Then press the

ENTER button.

Press the RETURN button.

¡The setup screen will appear.

PARENTAL LOCK

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

Parental Contorols

Parental Level 7[NC-17]

Change

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

Language

Display

Audio

Parental

Parental Level

4 [PG-13]

3 [PG]

Parental Contorols

Parental Level 7[NC-17]

Change

Select : / Set : ENTER

Cancel : Exit : SETUP

Language

Display

Audio

Parental

Parental Contorols

Parental Level 7[NC-17]

Change

Password

Enter current password

_ _ _ _

Select : / Set : ENTER

Cancel : Exit : SETUP

Password

Enter current password...

_ _ _ _

Language

Display

Audio

Parental

Select : / Set : ENTER

Cancel : Exit : SETUP

TD253-Body 02.11.28 13:37 Page 32

–

0C28

–

––

–

1 Afar 4 7 4 7

2 Abkhazian 4 7 4 8

3 Afrikaans 4 7 5 2

4 Amharic 4 7 5 9

5 Arabic 4 7 6 4

6 Assamese 4 7 6 5

7 Aymara 4 7 7 1

8 Azerbaijani 4 7 7 2

9 Bashkir 4 8 4 7

10 Byelorussian 4 8 5 1

11 Bulgarian 4 8 5 3

12 Bihari 4 8 5 4

13 Bislama 4 8 5 5

14 Bengali;Bangla 48 6 0

15 Tibetan 4 8 6 1

16 Breton 4 8 6 4

17 Catalan 4 9 4 7

18 Corsican 4 9 6 1

19 Czech 4 9 6 5

20 Welsh 4 9 7 1

21 Danish 5 0 4 7

22 German (GER) 50 5 1

23 Bhutani 5 0 7 2

24 Greek 5 1 5 8

25 English (ENG) 5 1 6 0

26 Esperanto 5 1 6 1

27 Spanish (SPA) 5 1 6 5

28 Estonian 5 1 6 6

29 Basque 5 1 6 7

30 Persian 5 2 4 7

31 Finnish 5 2 5 5

32 Fiji 5 2 5 6

33 Faroese 5 2 6 1

34 French (FRE) 5 2 6 4

35 Frisian 5 2 7 1

36 Irish 5 3 4 7

37 Scots Gaelic 5 3 5 0

38 Galician 5 3 5 8

39 Guarani 5 3 6 0

40 Gujarati 5 3 6 7

41 Hausa 5 4 4 7

42 Hindi 5 4 5 5

43 Croatian 5 4 6 4

44 Hungarian 5 4 6 7

45 Armenian 5 4 7 1

46 Interlingua 5 5 4 7

47 Interlingue 5 5 5 1

48 Inupiak 5 5 5 7

49 Indonesian 5 5 6 0

50 Icelandic 5 5 6 5

51 Italian (ITA) 5 5 6 6

52 Hebrew 5 5 6 9

53 Japanese (JPN) 5 6 4 7

54 Yiddish 56 5 5

55 Javanese 5 6 6 9

56 Georgian 5 7 4 7

57 Kazakh 5 7 5 7

58 Greenlandic 5 7 5 8

59 Cambodian 57 5 9

60 Kannada 5 7 6 0

61 Korean (KOR) 5 7 6 1

62 Kashmiri 5 7 6 5

63 Kurdish 5 7 6 7

64 Kirghiz 5 7 7 1

65 Latin 5 8 4 7

66 Lingala 5 8 6 0

67 Laothian 5 8 6 1

68 Lithuanian 5 8 6 6

No. Language Country code

69 Latvian;Lettish 5 8 6 8

70 Malagasy 5 9 5 3

71 Maori 5 9 5 5

72 Macedonian 5 9 5 7

73 Malayalam 5 9 5 8

74 Mongolian 5 9 6 0

75 Moldavian 5 9 6 1

76 Marathi 5 9 6 4

77 Malay 5 9 6 5

78 Maltese 5 9 6 6

79 Burmese 5 9 7 1

80 Nauru 6 0 4 7

81 Nepali 6 0 5 1

82 Dutch (DUT) 6 0 5 8

83 Norwegian 6 0 6 1

84 Occitan 6 1 4 9

85 (Afan)Oromo 6 1 5 9

86 Oriya 6 1 6 4

87 Panjabi 6 2 4 7

88 Polish 6 2 5 8

89 Pashto;Pushto 62 6 5

90 Portuguese 62 6 6

91 Quechua 6 3 6 7

92 Rhaeto-Romance 6 4 5 9

93 Kirundi 6 4 6 0

94 Romanian 6 4 6 1

95 Russian 6 4 6 7

96 Kinyarwanda 6 4 6 9

97 Sanskrit 6 5 4 7

98 Sindhi 6 5 5 0

99 Sangho 6 5 5 3

100 Serbo-Croatian 6 5 5 4

101 Singhalese 6 5 5 5

102 Slovak 6 5 5 7

103 Slovenian 6 5 5 8

104 Samoan 6 5 5 9

105 Shona 6 5 6 0

106 Somali 6 5 6 1

107 Albanian 6 5 6 3

108 Serbian 6 5 6 4

109 Siswat 6 5 6 5

110 Sesotho 6 5 6 6

111 Sundanese 6 5 6 7

112 Swedish 6 5 6 8

113 Swahili 6 5 6 9

114 Tamil 6 6 4 7

115 Telugu 6 6 5 2

116 Tajik 6 6 5 3

117 Thai 6 6 5 4

118 Tigrinya 66 5 5

119 Turkmen 66 5 7

120 Tagalog 6 6 5 8

121 Setswana 6 6 6 0

122 Tonga 6 6 6 1

123 Turkish 66 6 4

124 Tsonga 6 6 6 5

125 Tatar 6 6 6 6

126 Twi 6 6 6 9

127 Ukrainian 6 7 5 7

128 Urdu 6 7 6 4

129 Uzbek 6 7 7 2

130 Vietnamese 6 8 5 5

131 Volapuk 6 8 6 1

132 Wolof 6 9 6 1

133 Xhosa 7 0 5 4

134 Yoruba 7 1 6 1

135 Chinese (CHI) 7 2 5 4

136 Zulu 7 2 6 7

No. Language Country code

DVD

LANGUAGE CODE LIST

TD253-Body 02.11.28 13:37 Page 33

–

0C28

–

––

–

Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked

possibilities. Before arranging for service, check these items. It could save your time and money.

Problem Corrective Action

Remote Control Doesn’t Work

•

Is TV/DVD plugged in?

•

Power at outlet?

•

Check batteries in Remote Control.

Bars On Screen

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

Picture Distorted or Blurred

•

Try a new channel, if OK, then possible station trouble.

•

If outside antenna is being used, check for broken wire.

Picture Rolls Vertically

•

Try a new channel, if OK, then possible station trouble.

Lines or Streaks in Picture

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

No Color

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Adjust COLOR control.

Poor Reception on Some Channels

•

Try a new channel, if OK, then possible station trouble.

Ghosts in Picture

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

Weak Picture

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Adjust CONTRAST & BRIGHT control.

Sound OK, Picture Poor

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

•

Adjust CONTRAST & BRIGHT control.

Picture OK, Sound Poor

•

Try a new channel, if OK, then possible station trouble.

•

Check for local interference.

No Picture or Sound

•

Try a new channel, if OK, then possible station trouble.

•

Is TV/DVD plugged in?

•

Power at outlet?

•

Is TV/DVD’S POWER button on?

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Turn off with POWER button and then turn it on after about a minute.

TROUBLESHOOTING GUIDE

TD253-Body 02.11.28 13:37 Page 34

–

0C28

–

––

–

Closed Caption Problem Possible Remedy

My TV is showing captions • You are watching a live broadcast and spelling errors made by the

that are misspelled. • closed captioning production company may pass through uncorrected.

• A prerecorded program will not show any misspelled words because

• of the normal time available for editing the captions.

My TV will not show the text • Captions that are delayed a few seconds behind the actual dialogue

in its entirety or there is a delay of • are common for live broadcast. Most captioning production companies

what is being said. • can display a dialogue to a maximum of 220 words per minute. If a

• dialogue exceeds that rate, selective editing is used to insure that the

• captions remain up-to-date with the current TV screen dialogue.

My captions are scrambled with • Interference caused by building, power lines, thunderstorms, etc.

white boxes on the TV screen. • may cause scrambled or incomplete captions to appear.

My program guide listed a TV show

• Broadcasters may at times use a time compression process to the

as being closed captioned but none • actual program so that additional advertising time can be given.

of the captions were displayed. • Since the decoder cannot read the compressed information,

• captions will be lost.

My TV screen shows a black box • You are in the TEXT mode. Select CAPTION mode or CAPTION

on certain channels. • [OFF].

Uneven color

• Unplug the AC cord for about 30 minutes, then plug it again.

TD253-Body 02.11.28 13:37 Page 35

–

0C28

–

––

–

Symptom Cause Remedy

No power.

•

Loose power plug.

•

Insert the power plug firmly into the wall outlet.

The player does not

•

The remote control is not aimed

•

Aim the remote control directly at the sensor

respond to the

•

at the sensor on the TV/DVD.

•

on the TV/DVD.

remote control.

•

Obstacles present between the

•

Remove the obstacles from the signal path.

•

remote control and the sensor.

•

The remote control is too far

•

Use the remote control within 7m of

•

away from the TV/DVD.

•

the TV/DVD.

•

Dead batteries.

•

Replace the batteries.

No picture

•

Loose video connection.

•

Connect the video cables firmly.

•

Wrong disc.

•

Insert a correct video disc that plays on this

•

TV/DVD.

Disc cannot be

•

No disc.

•

Insert a disc.

played

•

Dirty disc.

•

Clean the disc.

•

Disc is placed upside down.

•

Place the disc correctly, with the label side up.

•

Parental lock is active.

•

Cancel the parental lock or change the control

•

level.

No sound

•

Loose audio connection.

•

Connect the audio cables firmly.

•

The power of the connected

•

Turn the power of the audio component on.

•

audio component is off.

•

Wrong audio output settings.

•

Correct the audio output settings.

•

Wrong input settings on the

•

Correct the input settings on the audio

•

connected audio component.

•

component.

Distorted picture

•

Immediately after playing,

•

There are some cases where pictures may be

•

press fast forward or in reverse.

•

slightly distorted, which are not a sign of a

•

malfunction.

Audio or subtitle

•

The selected language is not

•

No malfunction.

language does not

•

available for audio or subtitles

match the setup.

•

on the DVD.

The camera angle

•

The DVD does not contain

•

No malfunction.

cannot be changed.

•

sequences recorded from

•

different camera angles.

Audio or subtitle

•

The DVD does not contain

•

No malfunction.

language cannot be

•

audio source or subtitles in the

changed.

•

selected language.

"Prohibited icon"

•

That operation is prohibited by

•

No malfunction.

appears on the

•

the TV/DVD or disc.

screen, prohibiting

an operation.

CD sound dropout

•

Scratched disc

•

Replace the disc with unscratched one.

No CD reproduction

DVD picture dropout

DVD picture freeze

DVD picture in mosaic

No DVD reproduction

NOTES:

•

Some functions are not available in specific modes, but this is not a malfunction. Read the description in

this Owner’s Manual for details on correct operations.

•

Playback from a desired track and random playback are not available during program playback.

If the TV/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the

player, consulting the following checklist.

DVD

TD253-Body 02.11.28 13:37 Page 36

–

0C28

CABINET CLEANING

•

Wipe the front panel and other exterior surfaces of

the TV/DVD with a soft cloth immersed in luke-

warm water and wrung dry.

•

Never use a solvent or alcohol. Do not spray insec-

ticide liquid near the TV/DVD. Such chemicals

may cause damage and discoloration to the

exposed surfaces.

SERVICING

•

Should your TV/DVD become inoperative, do not

try to correct the problem by yourself. There are no

user-serviceable parts inside. Turn off, unplug the

power cord, and please call our help line at 1-800-

968-3429, to locate an Authorized Service Center.

IF THE LASER OPTICAL PICKUP UNIT IS DIRTY

•

If the player still does not perform properly when it is operated while referring to the relevant sections and to

"TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty. Consult

your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

•

Use discs which have the following logos on them.

(Optical audio digital discs.)

•

Handle the discs so that fingerprints and dust do

not adhere to the surfaces of the discs.

•

Always store the disc in its protective case when it

is not used.

DISC HANDLING

•

To clean-off, use a soft cloth.

•

Do not use a hard cloth since this will mar the disc.

•

Wipe the disc in a straight line from center to edge.

•

Never wipe with a circular motion.

•

Do not use detergent or abrasive cleaning agents.

MAINTENANCE

TD253-Body 02.11.28 13:37 Page 37

–

0C28

Television system: NTSC-M

TV Standard

Closed caption system: §15.119/FCC

Channel coverage:

VHF: 2 ~ 13

UHF: 14 ~ 69

CATV: 2 ~13, A ~ W,

W+1 ~ W+84,

A-5 ~ A-1, 5A

Tuning System: 181 channel

frequency synthesized

tuning system

Channel access: Direct access keyboard,

programmable

scan and up/down

Product type: DVD Player

Discs: DVD video, Audio CD

Output signal format: NTSC color

Frequency response

(output jack)

DVD (linear sound): 20 Hz to 22 kHz

(sample rate: 48 kHz)

20 Hz to 44 kHz

(sample rate: 96 kHz)

CD: 20 Hz to 20 kHz

Signal-to-noise ratio

(S/N ratio)(output jack)

CD: 100 dB (EIAJ)

Dynamic range

(output jack)

DVD (linear sound): 85 dB

CD: 84 dB (EIAJ)

Total distortion factor

CD: 0.07% (EIAJ)

Wow and flutter: Below the measurement

limitation (+/-0.001%

W PEAK) (EIAJ)

•

Designs and specifications are subject to change without notice and without our legal obligation.

•

If there is a discrepancy between languages, the default language will be English.

DVD

GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS

Sound output: 2 speakers, 1W, 8 ohm

OTHER SPECIFICATIONS

Terminals

Antenna input: VHF/UHF/CATV

75 ohm unbalanced (F-type)

Video input: RCA connector [ 1

Audio L/R input: RCA connector [ 2

Headphone: 1/8” stereo (3.5 mm)

Coaxial digital

audio output

(only DVD): One pin jack,

500m Vpp (75 ohm)

Analog audio L/R

output (only DVD): RCA connector [ 2

Remote control: Digital encoded

infrared light system

Operating

temperature: 5ºC to 40ºC

(41ºF~104ºF)

Power requirements: AC 120V, 60Hz

Power consumption

(Maximum): 90W

Picture tube: 19"

Dimensions: H:19-5/8” (498mm)

W:19-3/8” (492mm)

D:18-21/32” (474mm)

Weight: 41.9 lbs (19kg)

Accessories: Remote Control Unit with

2"AA"batteries

Owner’s Manual

SPECIFICATIONS

TD253-Body 02.11.28 13:37 Page 38

–

0C28

INDICE

■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 39

PANEL FRONTAL DEL TELEVISOR/DVD. . . . . . . . . . 39

MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 39

VISTA POSTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 40

CONEXIONES DE ANTENA/TELEVISIÓN

POR CABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

INSTALACIÓN DE LAS PILAS. . . . . . . . . . . . . . . . . . . 41

CONEXIÓN A TOMAS DE ENTRADA EXTERNA. . . . 41

CONEXIÓN A UN SISTEMA ESTÉREO (Para DVD) . . 41

CONEXIÓN A UN AMPLIFICADOR EQUIPADO CON

TOMAS DE ENTRADA DIGITAL, PLATINA MD O

PLATINA DAT (Para DVD) . . . . . . . . . . . . . . . . . . . . . . 41

CONEXIÓN A UN DECODIFICADOR DOLBY DIGITAL

O A UN DECODIFICADOR DTS (Para DVD) . . . . . . . . 41

TV SECTION

■

PREPARACIÓN PARA LA UTILIZACIÓN

. . . . . . . . . . . . 42

SELECCIÓN DE IDIOMA . . . . . . . . . . . . . . . . . . . . . . . 42

PREAJUSTE DE CANALES. . . . . . . . . . . . . . . . . . . . . . 42

DVD SECTION

■ REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . 43

REPRODUCCIÓN DE UN DVD DE VÍDEO O UN CD DE

AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

CONTROLES DE

OPERACIÓN Y FUNCIONES

PANEL FRONTAL DEL

TELEVISOR/DVD

Consulte la figura 1 de la página 8

MANDO A DISTANCIA

Consulte la figura 2 de la página 8

VISTA POSTERIOR

Consulte la figura 3 de la página 9

1.Bandeja de carga del disco

2.Toma de entrada VIDEO

Conecte aquí la toma de salida de vídeo de una

videocámara o de una videograbadora.

Tomas de entrada AUDIO L/R

Conecte aquí las tomas de salida de audio de una

videocámara o de una videograbadora.

4.Botón POWER

Púlselo para conectar y desconectar la alimentación.

Botones VOLUME m/n

Púlselos para controlar el nivel del volumen para

el DVD y el televisor.

6.Botones CHANNEL K/L

Púlselo para seleccionar el canal memorizado.

Púlselo para cambiar a un modo de televisor cuan-

do modo de DVD.

Ventanilla del sensor del mando a distancia

8.Botón STOP

Detiene la operación del disco.

Botón REV

Reproduce rápidamente hacia atrás hasta un

punto deseado.

10. Botón PLAY

Inicia la reproducción del contenido del disco.

Púlselo para cambiar a un modo de DVD cuando

modo de televisor.

11.

Botón FWD

Reproduce rápidamente hacia adelante hasta un

punto deseado.

12.

Botón PAUSE

Hace una pausa en la operación del disco.

13. Botón OPEN/CLOSE

Púlselo para insertar discos en la bandeja o

retirarlos de ella.

14.

Toma HEADPHONE

Para conectar auriculares (no suministrados) y

escuchar en privado.

15.

Botón MODE

Activa el modo de reproducción programada o el

modo de reproducción aleatoria.

16. Botones de números

Modo del televisor:

Pulse dos dígitos para tener acceso directamente

al canal deseado.

Recuerde pulsar "0" antes de elegir un canal de

un solo dígito.

Botón +100

Púlselo para seleccionar canales de televisión por

cable cuyo número sea igual o superior al 100.

Modo DVD:

Púlselo para introducir el número deseado.

Botón +10

Púlselo para introducir los números deseados

cuyo número sea igual o superior al 10.

17.

Botón SLEEP

Pulse el botón SLEEP para visualizar el tempo-

rizador para dormir y activar la función. La hora

de apagado puede determinarse por el número de

veces que usted pulsa el botón. (0, 10, 20, 30, 90,

0 minutos)

18.

Botones SKIP

Salta capítulos o pistas hasta un punto deseado.

19. Botón ZOOM

Activa el modo de reproducción programada o el

modo de reproducción aleatoria.

20.

Botón SETUP

Púlselo para activar o salir del modo de menús de

televisor o preparación de DVD.

21. Botón TITLE

Visualiza el menú de títulos.

22. Botón CLEAR

Repone un ajuste.

23. Botón DISPLAY

TD253UAES 02.11.28 13:37 Page 39

–

0C28

Modo del televisor:

Púlselo para visualizar el número del canal en la

pantalla. Si lo pulsa de nuevo, el número del canal

desaparecerá.

Modo de DVD:

Visualiza el estado actual en la pantalla del televi-

sor con fines de comprobación.

24. Botón SEARCH MODE

Púlselo para localizar un punto deseado.

25.

Botón AUDIO

Púlselo para seleccionar un idioma de audio o un

modo de sonido deseado.

26.

Botón SUBTITLE

Púlselo para seleccionar un idioma de subtítulos

deseado.

27. Botón REPEAT

Repite la reproducción del disco, título, capítulo o

pista actual.

28.

Botón ANGLE

Púlselo para cambiar el ángulo de la cámara y

verde, desde un ángulo diferente, la secuencia que

está siendo reproducida.

29. Botón A-B REPEAT

Repite la reproducción de una sección seleccionada.

30. Botón RETURN

Para volver a la operación anterior.

31.

Botón ENTER

Púlselo para establecer un ajuste.

32.

Botones de flechas

Modo de televisor:

Púlselo para seleccionar un modo de ajuste desde

el menú que aparece en la pantalla del televisor.

Púlselo para seleccionar o ajustar desde un menú

particular.

Modo de DVD:

Se utiliza cuando se hacen ajustes mientras se

observa la visualización en una pantalla de televisor.

33. Botón DISC MENU

Visualiza menús en el DVD.

34. Botón SELECT

Púlselo para cambiar a un modo de televisor,

modo de entrada externa o modo de DVD.

35.

Botón MUTE

Pulse el botón MUTE para apagar el sonido de un

programa de TV. La visualización del nivel del

sonido cambia de ROJO CLARO a AZUL

CLARO.) Pulse de nuevo el botón MUTE o el

botón VOL m o n para restaurar el sonido.

36. Botón PICTURE

Presione para entrar en el modo de ajuste de ima-

gen.

37.

Cable de alimentación

Conéctelo a una toma de CA convencional (120

V/60 Hz).

NOTA: Retire el cable de alimentación del gancho

para evitar romperlo antes de conectarlo a

una toma de CA convencional.

38.

Toma de salida de audio digital COAXIAL

Conéctela a la entrada digital de un amplificador o

decodificador externo.

39. Toma de salida AUDIO L/R

Conéctela a la entrada de audio analógico de un

amplificador o decodificador externo.

NOTA: Las tomas de entrada de audio (roha y

blanca) en el lado trasero sirven para pro-

ducir no el son televisor ni el son de

entrada externa, sino el son DVD.

40.

Toma de entrada ANT.

Conéctela a una antena, sistema de televisión por

cable o sistema de satélite.

ANTENA COMBINADA DE VHF/UHF

La antena de varilla de VHF/UHF (no suministrada)

es desmontable. Inserte el vástago de la antena en el

agujero de la parte superior del televisor/DVD.

Conecte la antena de varilla de VHF/UHF o la antena

combinada de VHF/UHF al terminal ANT. del televi-

sor/DVD como se muestra en el diagrama de abajo.

Para obtener la mejor recepción, extienda completa-

mente la antena de varilla de VHF/UHF y haga los

ajustes necesarios. (Evite tocar la sección superior

cuando haga el ajuste.)

NOTA:

Antes de enchufar la antena de varilla en un terminal

de antena, compruebe que la clavija no esté doblada.

Si lo está, enderece la clavija como se muestra en la

ilustración y luego enchufe la clavija en el terminal

de antena.

NOTA:

La conexión de una antena interior puede que no pro-

porcione siempre una recepción de TV aceptable.

ANTENAS SEPARADAS DE VHF/UHF

En algunas áreas será necesario utilizar una antena

exterior.

Consulte la figura 5 de la página 10

Consulte la figura 4 de la página 10

CONEXIONES DE ANTENA/

TELEVISIÓN POR CABLE

PREPARACIÓN PARA LA

UTILIZACIÓN

TD253UAES 02.11.28 13:37 Page 40

–

0C28

NOTAS:

•

Asegúrese de desconectar la alimentación a todos

los componentes del sistema antes de hacer la

conexión a otro componente.

•

Consulte el manual del propietario de su sistema

estéreo y de cualquier otro componente que vaya a

conectar al televisor/DVD.

•

Las tomas de entrada de audio (roha y blanca) en el

lado trasero sirven para producir no el son televisor

ni el son de entrada externa, sino el son DVD.

Utilice un cable digital coaxial (de venta en el comer-

cio) para las conexiones de audio.

NOTAS:

•

La fuente de audio de un disco del formato de

sonido ambiental Dolby Digital de 5,1 canales no

puede ser grabada como sonido digital por una

platina MD o DAT.

•

Asegúrese de desconectar la alimentación de todos

los componentes del sistema antes de hacer la

conexión a otro componente.

•

Consulte los manuales del propietario de los com-

ponentes que vaya a conectar al televisor/DVD.

•

Ponga DOLBY DIGITAL y DTS en OFF para la

salida de audio en el modo de preparación. La

reproducción en el televisor/DVD utilizando los

ajustes incorrectos puede generar distorsión de

ruido, y también puede estropear los altavoces.

•

El audio se silenciará cuando DOLBY DIGITAL se

ponga en OFF y VIRTUAL 3D se ponga en ON

para la salida de audio en el modo de preparación y

usted seleccione la fuente de audio del formato de

sonido ambiental Dolby Digital de 5,1 canales.

Consulte la figura 10 de la página 13

CONEXIÓN A UN

AMPLIFICADOR EQUIPADO

CON TOMAS DE ENTRADA

DIGITAL, PLATINA MD O

PLATINA DAT (Para DVD)

Consulte la figura 9 de la página 13

CONEXIÓN A UN SISTEMA

ESTÉREO (Para DVD)

TELEVISIÓN POR CABLE SIN CAJA DE

CONVERTIDOR/DECODIFICADOR

Utilice esta conexión si su sistema de televisión por

cable se conecta directamente a su televisor/DVD sin

necesidad de caja de convertidor.

TELEVISIÓN POR CABLE CON CAJA

DE CONVERTIDOR/DECODIFICADOR

O CAJA DE SATÉLITE

Si su proveedor de servicios de televisión por cable le

suministra una caja de convertidor o si usted utiliza

un sistema de satélite, podrá utilizar la conexión bási-

ca mostrada aquí.

1) Abra la tapa del compartimiento de las pilas del

mando a distancia presionándola en el sentido de

la flecha.

2) Inserte 2 pilas tamaño "AA" en su compartimiento

colocando las polaridades (+/-) en sus posiciones

correspondientes.

3) Vuelva a poner la tapa.

Cuando vea un programa grabado en otra fuente

(videograbadora o videocámara), utilice las tomas de

entrada de audio/vídeo de la parte delantera del tele-

visor/DVD.

Conecte las tomas de salida de audio/vídeo de otra

fuente a las tomas AUDIO L/R y VIDEO de este tele-

visor/DVD. Y luego pulse el botón SELECT hasta

que "VIDEO" aparezca en la pantalla.

NOTA:

•

Cuando conecte una videograbadora monoaural

(otra fuente) a este televisor/DVD, conecte la toma

de salida de audio de la videograbadora monoaural

(otra fuente) a la toma AUDIO L de este televi-

sor/DVD. El audio saldrá igualmente en los canales

Ly R.

Conexiones de antena/televisión por cable

Continúa en la página siguiente.

Consulte la figura 8 de la página 12

CONEXIÓN A TOMAS DE

ENTRADA EXTERNA

INSTALACIÓN DE LAS PILAS

Consulte la figura 7 de la página 11

Consulte la figura 6 de la página 11

TD253UAES 02.11.28 13:37 Page 41

–

0C28

Para empezar

Conecte el cable de alimentación a una toma de CA

convencional.

NOTA: Si aparecen algunos dígitos en la esquina de

la pantalla, pulse el botón POWER sin des-

enchufar el cable de alimentación.

Pulse el botón POWER para encender el

televisor/DVD.

Pulse el botón SELECT del mando a distancia hasta

que el número del canal o "TV" aparezca en la pan-

talla. Luego pulse el botón TV.

Si desea cambiar el idioma del menú en pantalla, siga

el procedimiento de abajo.

Pulse el botón MENU para que la visualización del

menú aparezca en la pantalla del televisor.

Pulse el botón de flecha K o L para apuntar a

"LENGUAJE".

Seleccione "ENGLISH" (inglés), "ESPAÑOL" o

"FRANÇAIS" (francés) utilizando el botón de flecha

B o s.

Pulse el botón MENU para salir del menú.

NOTA: Para el modo del televisor y el modo del

DVD se deberá seleccionar un idioma de

visualización en pantalla.

Para preajustar un canal o cambiar un canal de prea-

juste, siga el procedimiento de abajo.

PREAJUSTE DE CANALES

SELECCIÓN DE IDIOMA

TV SECTION

PREPARACIÓN PARA LA

UTILIZACIÓN

Fabricado bajo licencia de Dolby

Laboratories. “Dolby” y el símbolo de la D

doble son marcas de fábrica de Dolby

Laboratories.

“DTS” y “DTS Digital Out” son marcas de

fábrica de Digital Theater Systems, Inc.

Si se utiliza este televisor/DVD para reproducir

fuentes del formato de sonido ambiental Dolby

Digital de 5,1 canales o de sonido ambiental DTS, el

televisor/DVD dará salida a un flujo de datos Dolby

Digital o DTS desde su toma de salida de audio digi-

tal COAXIAL. Conectando el reproductor a un

decodificador Dolby Digital o DTS, usted podrá dis-

frutar de un ambiente más convincente y real con un

sonido ambiental potente y de alta calidad de tipo

profesional tal como el que se oye en salas de cine.

Utilice cables digitales coaxiales (de venta en el com-

ercio) para las conexiones de audio.

NOTAS:

•

Asegúrese de desconectar la alimentación de todos

los componentes del sistema antes de hacer la

conexión a otro componente.

•

Consulte los manuales del propietario de los com-

ponentes que vaya a conectar al televisor/DVD.

•

Si conecta un decodificador Dolby Digital, ponga

DOLBY DIGITAL en ON para la salida de audio

en el modo de preparación.

•

Si conecta un decodificador DTS, ponga DTS en

ON para la salida de audio en el modo de

preparación.

•

A menos que se haga la conexión a un decodifi-

cador Dolby Digital o DTS, ponga DOLBY DIGI-

TAL y DTS en OFF para la salida de audio en el

modo de preparación. La reproducción en el televi-

sor/DVD utilizando los ajustes incorrectos puede

generar distorsión de ruido, y también puede estro-

pear los altavoces.

•

El audio se silenciará cuando DOLBY DIGITAL se

ponga en OFF y VIRTUAL 3D se ponga en ON

para la salida de audio en el modo de preparación y

usted seleccione la fuente de audio del formato de

sonido ambiental Dolby Digital de 5,1 canales.

Consulte la figura 11 de la página 14

CONEXIÓN A UN

DECODIFICADOR DOLBY

DIGITAL O A UN

DECODIFICADOR DTS

(Para DVD)

TD253UAES 02.11.28 13:37 Page 42

–

0C28

Pulse el botón MENU para que la visualización del

menú aparezca en la pantalla del televisor.

Pulse el botón de flecha K o L para apuntar a

"CANALES PROGRAMADOS". Luego pulse el

botón de flecha B.

Pulse el botón de flecha K o L para apuntar a

"MEMO AUTOMÁTICA". Luego pulse el botón de

flecha B.

El sintonizador explora y memoriza todos los canales

activos de su zona.

•

El televisor distingue entre los canales de TV con-

vencional y los canales de televisión por cable.

•

Cuando termine la función AUTO MEMO, el canal

memorizado más bajo vuelve a aparecer en la pan-

talla.

•

Cuando pulse el botón de flecha K o L después de

seleccionar AUTO MEMO, el sintonizador se

detendrá en los canales sin memorizar solamente.

•

El televisor puede considerar canales de TV como

canales CATV según las condiciones de la recep-

ción. En este caso, active de nuevo la función

AUTO MEMO en condiciones de recepción fina.

[FUNCIÓN DE ADICIÓN/BORRADO]

1) Pulse el botón MENU para que la visualización

del menú aparezca en la pantalla del televisor.

2) Pulse el botón de flecha K o L para apuntar a

"CANALES PROGRAMADOS". Luego pulse el

botón de flecha B.

3) Pulse el botón de flecha K o L para apuntar a

"AÑADIR/BORRAR". Luego pulse el botón de

flecha B.

4) Utilice el botón de flecha K o L para seleccionar

el canal que desee memorizar o borrar de la

memoria.

NOTA: La visualización volverá a la pantalla en

unos 10 segundos. Realice la función

"AÑADIR/BORRAR" mientras aparece la

visualización en la pantalla.

•

Pulse el botón de flecha B o s para encender el

número de canal en AZUL CLARO si usted desea

añadir el canal a la memoria.

•

Pulse el botón de flecha B o s para encender el

número de canal en ROJO CLARO si usted desea

borrar el canal a la memoria.

5) Pulse el botón MENU para salir del menú.

REPRODUCCIÓN DE UN DVD

DE VÍDEO O UN CD DE AUDIO

Para empezar

Conecte la alimentación del televisor, amplificador y

cualquier otro componente que esté conectado al

reproductor DVD. (Cambie el sistema de entrada para

adaptarlo al reproductor DVD, y compruebe que el

volumen del sonido sea correcto.)

1 Pulse el botón POWER.

¡La alimentación se conectará.

2 Pulse el botón OPEN/CLOSE.

¡La bandeja de carga del disco se abrirá.

3 Ponga un disco en la bandeja.

Asegúrese de que el disco esté correctamente asen-

tado en el hueco correcto, con el lado de la etiqueta

hacia arriba.

4 Pulse el botón PLAY.

La bandeja se cerrará automáticamente y la repro-

ducción empezará desde el primer capítulo o pista

del disco. Necesitará pulsar el botón PLAY sólo

cuando la bandeja haya sido cerrada pulsando el

botón OPEN/CLOSE.

¡Cuando reproduzca un DVD que tenga grabado un

menú de títulos, el menú tal vez aparezca en la pan-

talla. En este caso, consulte "UTILIZACIÓN DEL

MENÚ DE TÍTULOS".

Pulse el botón STOP para detener la reproducción.

CDDVD

REPRODUCCIÓN DE UN

DISCO

DVD SECTION

TD253UAES 02.11.28 13:37 Page 43

Printed in Malaysia 0EMN01971

TD253UD

★★★★★

FULL 90 DAY WARRANTY

For 90 days from the date of purchase, Sears will repair any defect in material or workmanship in

this TV/DVD, free of charge. For one year from the date of purchase, SEARS will supply, at no

charge, replacement for defective parts.

Two (2) years for Picture Tube. Certain parts are excluded from this warranty.

The above warranty coverage applies only to TV/DVD which are used for private household purposes

TO OBTAIN WARRANTY SERVICE, SIMPLY RETURN THE TV/DVD TO THE NEAREST SEARS

SERVICE CENTER IN THE UNITED STATES.

This warranty gives you specific legal rights, and you may also have other rights which vary from

state to state.

Get it fixed, at your home or ours!

For repair of major brand appliances in your own home…

no matter who made it, no matter who sold it!

1-800-4-MY-HOME

Anytime, day or night

(1-800-469-4663)

www.sears.com

To bring in products such as vacuums,

lawn equipment and electronics for repair, call for

the location of your nearest Sears Parts & Repair Center.

1-800-488-1222

Anytime, day or night

www.sears.com

For the replacement parts, accessories and owner’s manuals

that you need to do-it-yourself, call

Sears PartsDirect

1-800-366-PART

6 a.m. – 11 p.m. CST,

(1-800-366-7278)

7 days a week

www.sears.com/partsdirect

To purchase or inquire about a Sears Service Agreement:

1-800-827-6655

7 a.m. – 5 p.m. CST, Mon. – Sat.

Para pedir servicio de reparación a domicilio,

y para ordenar piezas con entrega a domicilio:

1-888-SU-HOGAR

(1-888-784-6427)

Au Canada pour service en français:

1-877-LE-FOYER

(1-877-533-6937)

® Registered Trademark / ™ Trademark of Sears, Roebuck and Co.

® Marca Registrada / ™ Marca de Fábrica de Sears, Roebuck and Co.

HomeCentral

Sears Roebuck and Co., Dept. 817WA Hoffman Estates, IL 60179

For the location of a Sears Service Center in your area : 1-800-488-1222

TD253UD_BCV 02.11.28 13:38 Page 44

Sylvania SRTD219 Manual de usuario

Marca: Sylvania

Modelo: SRTD219

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Este manual también es adecuado para

TV DVD Combo SRTD219

Descargar PDF

informe

En otros idiomas

English: Sylvania SRTD219 User manual

Sylvania SRTD219 Manual de usuario

Este manual también es adecuado para

Sylvania SRTD219 Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos