Samsung WF405ATPA Serie El manual del propietario

Marca: Samsung

Modelo: WF405ATPA Serie

Categoría: Lavadoras

Tipo: El manual del propietario

Este manual también es adecuado para

the possibilities

Thank you for purchasing this Samsung product.

koy foatuFo¢of

PoworYoa_mTM

1. Extra Large Capacity

Samsung's extra-large capacity laundry machine can wash a full set of your bedding, a king-

size comforter, or up to 28 bath towels in a single load. Since you don't have to do as many

loads, you save time, money, water, and energy.

2. PowerFoam TM

Samsung's effective PowerForm delivers improved cleanliness with advanced fabric care.

PowerFoam allows detergent to disperse evenly and penetrate fabrics faster and deeper.

3. SpeedSpray TM

Samsung's new SpeedSpray technology saves you time by shortening wash times while still

keeping all portions of the washing process and getting your clothes clean.

SpeedSpray performs in Normal, Bedding PLUS, Deep Steam, Stain Away and Eco Cold

cycle and the saving time may vary by cycles and various load and option compositions.

4. Smart Care

Samsung's Smart Care, an automatic error-monitoring system, detects and diagnoses

problems at an early stage and provides quick and easy solutions.

5. VRT TM (Vibration Reduction Technology)

This Samsung washer performs smoothly at top spin speeds, minimizing noise and vibration.

6. Pure Cycle TM (Tub Cleaning cycle)

Clean your drum with one button! Pure Cycle is specially designed to remove detergent

residue and dirt buildup in the tub, diaphragm, and on the door glass without the need for

special chemical detergents.

7. Deep steam

The Deep Steam feature boosts cleaning performance and loosens grime and dirt, providing

superior cleaning results.

8. Diamond drum TM

Takes gentle care of your fabrics. With inside holes 36 % smaller than those of conventional

drums,the diamond drum prevents fabrics from sticking out through the holes and

consequently being damaged.

9. Woolmark Certified

The machine wash wool cycle on Samsung machines has been tested and has passed the

required Woolmark Company specification for machine washable wool products. Fabrics

should be washed according to the instructions on the garment label as specified by

Woolmark and Samsung.

1&Digital display & Center jog dial

The jog dial enables you to select cycles in both directions with ease, and the display is easy

to use and understand.

11 .DD Motor

The power to handle anything! Our direct-drive inverter motor delivers power right to the

washer tub from a variable speed, reversible motor. A beltless direct-drive motor generates a

higher spin speed of 1200 rpm for more effective, quiet operation. The washer also has fewer

moving parts, meaning fewer repairs.

2 key features of your new PowerFoam rMwasher

12.Sanitize

When you select the NSF certified Sanitize cycle, the water heats to an extra high

temperature and removes 99.9 % of certain bacteria typically found on clothing, bedding, or

towels. This certification is awarded by NSF International, an independent third-party testing

and certification organization.

Please check the garment care label to avoid garment damage. Only sanitizing cycles have

been designed to meet the requirements of this protocol for sanitization efficacy.

_S_ NSF Protocol P172

Sanitization Performance of Residential and

Commercial, Family-Sized Clothes Washers

1&Pedestal with Storage Drawers (Model No : WE357")

An optional 15" pedestal is available to raise the washer for easier loading and unloading.

Italso offers a built-in storage drawer that can hold a 100 oz. bottle of detergent

14.Stacking (Model No: SK-3A1/XAA, SK-4A/XAA, SK-5A/XAA)

Samsung washers and dryers can be stacked to maximize usable space. An optional

stacking kit is available for purchase from your Samsung retailer.

key features of your new PowerFoam _Mwasher 3

Congratulations on your new Samsung washer. This manual contains important

information on the installation, use, and care of your appliance. Please take time

to read this manual to take full advantage of your washer's many benefits and

features.

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS

Warnings and Important Safety Instructions in this manual do not cover all possible conditions and

situations that may occur. It is your responsibility to use common sense, caution, and care when installing,

maintaining, and operating your washer.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

What the icons and signs in this user manual mean:

Hazards or unsafe practices that may result in severe personal injury

or death.

WARNING To reduce the risk of fire, explosion, electric shock, or personal injury

when using your washer, follow these basic safety precautions:

Z_ Hazards or unsafe practices that may result in minor personal injury or

CAUTION property damage.

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicitly.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Note

These warning signs are here to prevent injury to you and others.

Please follow them explicitly.

After reading this section, keep it in a safe place for future reference.

_Read all instructions before the

using appliance.

SAVE THESE INSTRUCTIONS

4 Safety informaton

//_ WARNING: To reduce the risk of fire, electric shock, or injury to when using

persons your

WARNINGappliance, follow basic precautions, including the following:

1. Read all instructions before using the appliance.

2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked in,

or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances

as they give off vapors that could ignite or explode.

3. Do not allow children to play on or in the appliance. Close supervision of children is

necessary when the appliance is used near children.

4. Before the appliance is removed from service or discarded, remove the door to the

washing or drying compartment.

5. Do not reach into the appliance if the drum is moving.

6. Do not install or store this appliance where it will be exposed to the weather.

7. Do not tamper with controls.

8. Do not repair or replace any part of the appliance or attempt any servicing unless

specifically recommended in the user-maintenance instructions or in published user-

repair instructions that you understand and have the skills to carry out.

9. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances

to the wash water. These substances give off vapors that could ignite or explode.

10.Under certain conditions, hydrogen gas may be produced in a hot water system

that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If

the hot water system has not been used for such a period, before using a washer or

combination washer-dryer, turn on all hot water faucets and let the water flow from

each for several minutes. This will release any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during this time.

State of California Proposition 65 Warnings:

WARNING

WARNING:This product contains chemicals known to the State of California to cause

cancer and reproductive toxicity.

SAVE THESE INSTRUCTIONS

Safety information 5

SEVERE WARNING SIGNS FOR iNSTALLATiON

WARNING

Plug the power cord into an AC 120 V / 60 Hz / 15 A wall socket or higher and use the

socket for this appliance only. In addition, do not use an extension cord.

Sharing a wall socket with other appliances using a power strip or extending the power

cord may result in electric shock or fire.

Do not use an electric transformer. It may result in electric shock or fire.

Ensure that the power voltage, frequency and current are the same as those of the

product specifications. Failing to do so may result inelectric shock or fire.

The installation of this appliance must be performed by a qualified technician or service

company.

Failing to do so may result in electric shock, fire, an explosion, problems with the

product, or injury.

Remove all foreign substances such as dust or water from the power plug terminals and

contact points using a dry cloth on a regular basis.

Unplug the power plug and clean it with a dry cloth.

Failing to do so may result in electric shock or fire.

Plug the power plug into the wall socket in the right direction so that the cord runs towards

the floor.

Ifyou plug the power plug into the socket in the opposite direction, the electric wires

within the cable may be damaged and this may result in electric shock or fire.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

This may result in electric shock, fire, an explosion, or problems with the product

Never plug the power cord into a socket that is not grounded correctly and make sure

that it is in accordance with local and national codes.

Do not install this appliance near a heater or inflammable material.

Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct

sunlight and water (rain drops).

Do not install this appliance in a location where gas may leak.

This may result in electric shock or fire.

Plug the power plug into the wall socket firmly. Do not use a damaged power plug,

damaged power cord or loose wall socket.

This may result in electric shock or fire.

Do not pull or excessively bend the power cord.

Do not twist or tie the power cord.

Do not hook the power cord over a metal object, place a heavy object on the power cord,

insert the power cord between objects, or push the power cord into the space behind the

appliance.

This may result in electric shock or fire.

Do not pull the power cord when unplugging the power plug.

Unplug the power plug by holding the plug.

Failing to do so may result in electric shock or fire.

SAVE THESE INSTRUCTIONS

6 Safety informaton

When the power plug or power cord is damaged, contact your nearest service center.

! CAUTION SIGNS FOR INSTALLATION

CAUTION

_This appliance should be positioned in such a way that it is accessible to the power plug.

Failing to do so may result in electric shock or fire due to electric leakage.

Install your appliance on a level and hard floor that can support its weight.

Failing to do so may result in abnormal vibrations, noise, or problems with the product.

_ nplug the power plug when the appliance is not being used for long periods of time or

during a thunder/lightning storm.

Failing to do so may result in electric shock or fire.

SEVERE WARNING SIGNS FOR USING

WARNING

lf the appliance is flooded, cut the power immediately and contact your nearest service

center.

If the appliance generates a strange noise, a burning smell or smoke, unplug the power

plug immediately and contact your nearest service center.

Failing to do so may result in electric shock or fire.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without

touching the power plug. Do not touch the appliance or power cord.

Do not use a ventilating fan.

A spark may result in an explosion or fire.

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or

other flammable or explosive substances.

This may result in electric shock, fire or an explosion.

Do not open the washer door by force while it is operating (high-temperature washing/

drying/spinning).

Water flowing out of the washer may result in burns or cause the floor to be slippery.

This may result in injury.

Opening the door by force may result in damage to the product or injury.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the

washer before using it.

Do not insert your hand under the washer.

This may result in injury.

SAVE THESE INSTRUCTIONS

Safety information 7

Do not touch the power plug with wet hands.

This may result in electric shock.

Do not turn the appliance off by unplugging the power plug while an operation is in

progress.

Plugging the power plug into the wall socket again may cause a spark and result in

electric shock or fire.

Keep all packaging materials well out of the reach of children, as packaging materials can

be dangerous to children.

If a child places a bag over its head, it may result in suffocation.

Do not let children or infirm persons use this washer unsupervised.

Failing to do so may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washer while it is operating.

This may result in injury.

Make sure the detergent drawer is closed before you put laundry into the washer or remove

laundry from the washer.

If the detergent drawer is open, you could strike the drawer with your head and injure

yourself.

Do not attempt to repair, disassemble, or modify the appliance yourself.

Do not use any fuse(such as cooper, steel wire, etc.) other than the standard fuse.

When repairing or reinstalling the appliance is required, contact your nearest service

center.

Failing to do so may result in electric shock, fire, problems with the product, or injury.

lf any foreign substance such as water has entered the appliance, unplug the power plug

and contact your nearest service center.

Failing to do so may result in electric shock or fire.

When the water supply hose comes loose from the faucet and floods the appliance, unplug

the power plug.

Failing to do so may result in electric shock or fire.

Ifany foreign substance enters the appliance, unplug the power plug and contact you

nearest service center.

Failing to do so my result in electric shock or fire.

SAVE THESE INSTRUCTIONS

8 Safety info_'maton

CAUTION SIGNS FOR USING

CAUTION

When the washer is contaminated by a foreign substance such as detergent, dirt, food

waste, etc., unplug the power plug and clean the washer using a damp and soft cloth.

Failing to do so may result in discoloration, deformation, damage or rust.

The front glass may be broken by a strong impact. Take care when using the washer.

When the glass is broken, it may result in injury.

After a water supply failure or when reconnecting the water supply hose, open the faucet

slowly.

Open the faucet slowly after a long period of non-use.

The air pressure in the water supply hose or the water pipe may result in damage to a

part or in water leakage.

If a drain error occurs during an operation, check if there is a draining problem.

Ifthe washer is used when it is flooded because of a draining problem, it may result in

electric shock or fire due to electric leakage.

Insert the laundry into the washer completely so that laundry does not get caught in the

door.

Iflaundry gets caught in the door, it may result in damage to the laundry or the washer,

or result in water leakage.

Ensure that the faucet is turned off when the washer is not being used.

Ensure that the screw on the water supply hose connector is properly tightened.

Failing to do so may result in property damage or injury.

Take care that the Rubber Seal and the Front Door Glass are not contaminated by a foreign

substance (e.g. waste, thread, hair, etc.)

Ifa foreign substance is caught in the door or the door is not completely closed, it may

cause a water leakage.

Open the faucet and check if the water supply hose connector is firmly tightened and that

there is no water leaking before using the product.

Ifthe screws or the water supply hose connector are loose, it may result in water

leakage.

The product you have purchased is designed for domestic use only.

The use for business purposes qualifies as product misuse. In this case, the product will

not be covered by the standard warranty provided by Samsung and no responsibility can

be attributed to Samsung for malfunctions or damages resulting from such misuse.

If the wash is not started and the laundry is left for a period of time after you have added

detergent or applied stain remover or pre-treatment onto the laundry, the laundry may be

discolored.

Select the recommended cycle and temperature on the basis of the laundry items, sort the

laundry by color on the basis of its colorfastness and select the appropriate cycle.

Make sure that foreign objects such as pins, buttons and coins are removed from clothing

items when adding laundry to the washer. Wash dirty laundry separately from relatively

clean items and wash fragile items separately from tougher textiles.

If an item is stained, wash it as soon as possible. Use stain remover or detergent only after

testing the colorfastness of the item by applying a small quantity to an inside seam.

SAVE THESE INSTRUCTIONS

Safety information 9

Do not stand on top of the appliance or place objects (such as laundry, lighted candles,

lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

This may result in electric shock, fire, problems with the product, or injury.

Do not operate the appliance with wet hands.

This may result in electric shock.

Do not spray volatile material such as insecticide onto the surface of the appliance.

As well as being harmful to humans, it may also result in electric shock, fire or problems

with the product.

Do not place an object that generates a electromagnetic field near the washer.

This may result in injury due to a malfunction.

Since the water drained during a high-temperature wash or drying cycle is hot, do not touch

the water.

This may result in burns or injury.

Do not wash, spin or dry water-proof seats, mats or clothing (*).

Do not wash thick, hard mats even if the washer mark is on the care label.

This may result in injury or damage to the washer, walls, floor or clothing due to

abnormal vibrations.

* Woolen Bedding PLUS, rain covers, fishing vests, ski pants, sleeping bags, diaper

covers, sweat suits, and bicycle, motor cycle, car covers, etc.

Do not operate the washer when the detergent box is removed.

This may result in electric shock or injury due to water leakage.

Do not touch the inside of the tub during or just after drying as it is hot.

This may result in burns.

Do not insert your hand into the detergent dispenser after opening it.

This may result in injury as your hand may be caught.

Do not place any objects (such as shoes, food waste, animals) other than laundry into the

washer.

This may result in damage to the washer, or injury and death inthe case of pets due to

the abnormal vibrations.

Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.

This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams or lotions usually found in skincare

shops or massage clinics.

This may result in the rubber seal becoming deformed and water leakage.

Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long

periods of time.

This may cause the tub to rust.

If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the

surface and use a sponge to clean it. Never use a metal brush.

SAVE THESE INSTRUCTIONS

10 Safety information

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry

contaminated by dry cleaning detergent.

This may result in spontaneous combustion or ignition due to the heat of the oxidation of

the oil.

Do not use hot water from water cooling/heating devices.

This may result in problems with the washer.

Do not use natural hand-washing soap for the washer.

Ifit hardens and accumulates inside the washer, it may result in problems with the

product, discoloration, rust or bad odors.

Do not wash large laundry items such as Bedding PLUS in the washing net.

Failing to do so may result in injury due to abnormal vibrations.

Place smaller items, such as lace socks and lingerie in the washing net.

Do not use hardened detergent.

Ifit accumulates inside the washer, it may result in water leakage.

Do not wash throw rugs or doormats.

Ifyou wash throw rugs or doormats, the sand will accumulate inside the washer. It may

result in error such as no draining.

Take care that children's fingers are not caught in the door when closing it. This may result

in injury.

SEVERE WARNING SIGNS FOR CLEANING

WARNING

Do not clean the appliance by spraying water directly onto it.

Do not use the strong acid cleaning agent.

Do not use benzene, thinner or alcohol to clean the appliance.

This may result in discoloration, deformation, damage, electric shock or fire.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

Failing to do so may result in electric shock or fire.

SAVE THESE INSTRUCTIONS

Safety informaton 11

INSTALLING YOUR WASHER

OPERATING INSTRUCTIONS

13 Unpacking your washer

13 Overview of your washer

14 Electrical

14 Grounding

14 Water

15 Drain facility

15 Flooring

15 Location considerations

15 Alcove or closet installation

15 Undercounter installation (washer only)

16 With optional pedestal base or stacking kit

17 Important note to installer

17 Installation flow chart

20 Loading your washer

20 Washing clothes: Basic Instructions

WASHING A LOAD OF LAUNDRY

MAINTAINING YOUR WASHER

TROUBLESHOOTING

21 Overview of the control panel

23 Child Lock (_

24 Spin Only

24 Garment+ _"_

24 Delay Start

25 My Cycle

25 Smart Care

26 DEEP STEAM

26 Washing clothes using the cycle selector

27 Using steam wash

27 ATC (Auto Temperature Control)

28 Detergent use

28 Features

30 Cleaning the exterior

30 Cleaning the interior

30 Cleaning the dispensers

30 Storing your washer

31 Cleaning the debris filter

32 Cleaning the door seal/bellow

32 Preserving the top cover and the front frame

33 Pure Cycle TM

34 Check these solutions if your washer.,.

36 Information codes

APPENDIX

38 Fabric care chart

39 Cycle chart

41 Helping the environment

41 Declaration of conformity

41 Specification

12 Contents

UNPACKING YOUR WASHER

Unpack your washer and inspect it for shipping damage. Make sure you have received all the items

shown below. If your washer was damaged during shipping, or you do not have all of the items, contact

1-800-SAMSUNG (726-7864).

To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.

Z_ Packing materials can be dangerous to children. Keep all packing material (plastic bags, polystyrene,

....... etc.) well out of the reach of children.

OVERVIEW OF YOUR WASHER

Hot water supply

hose

Cold water supply

Detergent drawer _ /- /

Control panel

Door

Tub

Debris filter

Drain tube

Filter cover

_ Drain Hose

Adjustable legs

Wrench Bolt Hole Covers

Water Supply Hoses

Hose Guide

Plastic Zip Hose Tie

[_* Bolt hole covers The number of bolt hole covers depends on the model (3-6 covers).

hstal ing your washer 13

BASIC LOCATION REQUIREMENTS

Electrical

120 Volt 60 Hz 15 AMP fuse or circuit breaker

Individual branch circuit serving only your washer is recommended.

Your washer is equipped with a power cord.

Z_ NEVER USE AN EXTENSION CORD.

CAUTION

Grounding

ELECTRICAL GROUNDING IS REQUIRED FOR THIS APPLIANCE,

This appliance must be grounded. In the event of malfunction or breakdown, grounding will

reduce the risk of electric shock by providing a path of least resistance for electric current.

This appliance is equipped with a power cord having a three-prong grounding plug for use in a

properly installed and grounded three-prong outlet.

The plug must be plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

_An improperly connected equipment-grounding conductor can increase the risk of electrical

....... shock. Check with a qualified electrician or serviceman if you are not sure whether the

appliance is properly grounded. Do not modify the plug provided with the appliance - if it

does not fit the outlet, have a proper outlet installed by a qualified electrician.

IMPORTANT SAFETY PRECAUTIONS

To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and

grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No.

70 Latest Revision and local codes and ordinances. It is the personal responsibility of the

appliance owner to provide adequate electrical service for this appliance.

i_X NEVER CONNECT THE GROUND WIRE TO PLASTIC PLUMBING LINES, GAS LINES, OR

....... HOT WATER PIPES.

Water

Using bad quality water may cause the water supply valve to operate abnormally.

To correctly fill your washer in the proper amount of time, water pressure of 20-116 psi (137-

800 kPa)is required.

Water pressure less than 20 psi may cause water valve failure, may not allow the water valve to

shut off completely, or may extend the fill time beyond what your washer controls allow, causing

your washer to turn off. A time limit is built into the controls to prevent extensive flooding in your

home if an internal hose becomes loose.

The water faucets must be within 4 feet / 122 cm of the back of your washer to match the inlet

hoses provided with your washer.

[_ ccessory inlet hoses are available in various lengths up to 10 feet/305 cm for faucets that

are further away from the back of your washer.

To avoid the possibility of water damage:

,, Have water faucets easily accessible

,, Turn off faucets when the washer is not in use.

,, Periodically check that there is no leakage from the water inlet hose fittings.

CHECK ALL CONNECTIONS AT THE WATER VALVEAND FAUCET FOR LEAKS.

WARNING

14 Hnstalling your washer

Drain facility

The recommended height of the standpipe is 18 in/46 cm. The drain hose must be routed

through the drain hose clip to the standpipe. The standpipe must be large enough to accept the

outside diameter of the drain hose. The drain hose is attached at the factory.

Flooring

For best performance, you must install your washer on a solidly constructed floor. Wood floors

may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting

and soft tile surfaces are contributing factors to vibration which can cause your washer to move

slightly during the spin cycle.

Never install your washer on a platform or weakly supported structure.

Location considerations

Do not install your washer in areas where water may freeze, since your washer will always retain

some water in its water valve, pump, and hose areas. Freezing water can damage the belts,the

pump, hoses and other components.

Alcove or closet installation

MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:

Sides - 1 in/ 25 mm Top - 17 in / 432 mm

Rear- 5.9 in / 150 mm Closet Front - 2 in / 51 mm

Ifthe washer and dryer are installed together, the closet front must have at least a 72 in2(465

cm 2)unobstructed air opening. Your washer alone does not require a specific air opening.

A. Recessed area

1 in,

(2.5cm)

_q rq

1in. ---_-14_- 27 in. ----_1 I_" 27in. _ 1in.

(2.5cm) (68.8cm) (68.6cm) (2.5cm)

17in. '

432om i

l i;

2in. --_1_- 32.3 in. ----_1_-5.9 in.

. (Scm) (82cm) (15cm)

B. Side view - closet or confined area

Undercounter installation (washer only)

40 in. _ 1| _ I

(101.6ore)

I in. -..._I_.------ 27 in. ----_p_.- I in.

(2.5ore) (68.6cm) (2.5ore)

Hnstal in9 your washer 15

With optional pedestal base or stacking kit

Required Dimensions for Installation With Pedestal

51.7in.(131.4cm)toclearopendoor

I_e-5.9in.

(86.5cm) (15cm)

(98.4)

......._ .... 53.3in. |

(135.5cm)¢

,<-"-'-- 27in. ---------'_-

(68.6cm)

3 in.

(7.6cm)

3 in.

(7.6ore)

Closetor Door /_"

-_11_- 5in.

(12.7cm)

1in. -'_1 _-- 32.3 in. -"_1 _ 5.9 in.**

(2.5cm) (82cm) (15cm) ,,,

Required Dimensions for Installation With Stacking Kit

77.5in.

(196.8cm)

* Required spacing

** External exhaust elbow requires

additional space.

16 Hnstalling your washer

IMPORTANT NOTE TO INSTALLER

Please read the following instructions carefully before installing the washer.

These instructions should be retained for future reference.

We recommend you hire a professional to install this washer.

Installation flow chart

Selectinga _ Removingthe shipping _ Connectingthewater

location bolts (*Drumonly) andthe drain

i i i ii i ii i

Please Adjusting the _ poweringyour washing

check again levellingfeet machine

before

steps.

[

Yes

DOes

yourwasher

haveexcessvibration

ornoise?

Runninga Calibration mode

(RefertOthe following _ Finish the

installation

No description)

STEP 1

Removing the Shipping Bolts

Before using your washer, you must remove all shipping bolts from the

back of the unit.

1, Loosen all the bolts with the supplied wrench.

2, Slide the bolt and spacer up and remove the bolt with the spacer

through the hole in the rear wall of your washer. Repeat for each

bolt.

3, Cover the holes with the supplied Bolt Hole Covers (Seepage 13).

4, Keep the shipping bolts and spacers for future use.

STEP 2

Selecting a Location

_ Before you install your washer, make sure the location:

Has a hard, level surface

Is away from direct sunlight

Has adequate ventilation

Will not freeze (tempuratures are never below 32 °F or 0 °C).

Is away from heat sources such as oil or gas

Has enough room for the power cord.

Doesn't have any carpeting that will obstruct ventilation openings.

Hnstalling your washer 17

STEP 3

Installing your Washer

1. Ifyou use a stand pipe, make sure the connection

between the drain hose and the standpipe is NOT

airtight. The standpipe must be at least 18 in or 46

cm high.

You must always exercise caution to avoid

collapsing or damaging the drain hose. For best

results, the drain hose should not be restricted

in any way - by elbows, couplings, or excessive

length. For situations where the drain hose cannot

be conveniently elevated to at least 18 in or 46 cm,

the drain hose must be supported.

If drain hose is installed below 18"(46cm), water

can be drained in cycle working cause of siphon

phenomenon. It causes the washer to "nF" error.

Laundry tub

Drain Hose can be installed until 96"(245cm) maximum, f._l-

But drain capability can be reduced at this height. It Nomorethan_....

causes the washer to have odor, because of remained 6"(15crn)_....

water inthe drain system.

_ onnection the hose guide within 6"(15cm) from the end HoseGuide

of the drain hose. If the drain hose is extended more

than 6"(15cm) beyond the end of the hose guide, mold

or microorganisms could spread to the inside of the washer.

Cold

2. Check the inlet hose to ensure a washer is inside each fill hose.

Thread the inlet hoses to the HOT and COLD faucet connections.

On the other end of the hose, check for one rubber washer per hose

and attach each fill hose to the water valve. Make sure the hose with

Hot printed on it is attached to the HOT faucet. Tighten by hand until

snug, then two-thirds of a turn with pliers.

For correct water use, connect both HOT and COLD water valves. If

either or both are not connected, an "nF" (no fill)error can occur.

Cold printed

3. Turn on the "HOT" and "COLD "water supply and check the water

valve and the water supply connections for leaks.

Stand pipe

Hot

Rubber

Washer

Hot printed

18 Hnstalling your washer

4, Slide your washer into position.

5, Level your washer by turning the leveling legs in or out as

necessary by hand or by using the wrench included with your

washer.

When your washer is level, tighten the locking nuts using the

wrench or (-) flathead screwdriver.

6, Plug the power cord into a 3-Prong, well grounded 120 volt

60 Hz approved electrical outlet protected by a 15-amp fuse

or comparable circuit breaker.

Your washer is grounded through the third prong of the

power cord when plugged into a three-prong grounded

receptacle.

Your washer must be leveled on all four sides. A carpenter's

level should be used on all four corners of your washer. We

recommend you recheck your washer after a dozen or so

washes to make sure it's sitll level.

_ void damage to the legs. Do not move

the washer unless the Locking-nuts are

fastened to the bottom of the washer.

Test run

Make sure that you install your washing machine correctly by running the Rinse+Spin cycle

after the installation is complete.

STEP 4

Calibration mode

Your Samsung washing machine automatically detects the weight of the laundry.

For more accurate weight detection, please run Calibration Mode after the installation.

To run Calibration Mode, follow these steps:

1. Turn on the washer.

2. Press the Temp button and Delay Start button simultaneously for at least 3 seconds.

3. Remove any contents in the tub and close the door.

4. Press the Start/Pause button.

5. The drum rotates clockwise and counterclockwise for approximately 3 minutes.

6. When Calibration Mode is finished, the "En/End" appears on the display and the washing

machine turns off automatically. The washing machine is now ready for use.

hstal in9 your washer 19

na n tnActon

/_To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY

....... INSTRUCTIONS before operating this appliance.

LOADING YOUR WASHER

,, You can fill the tub with dry, unfolded clothes, but DO NOT OVERLOAD the tub. No more than 3/4 full.

,, Overloading may reduce washing efficiency, cause excess wear, and possibly cause creasing or

wrinkling of the load.

,, Wash delicate items such as bras, hosiery, and other lingerie in the Delicates cycle with similar

lightweight items.

,, When washing big bulky items or a few smaller items that don't fill the tub completely - a rug, a pillow,

stuffed toys, or one or two sweaters, for example - add a few towels to improve tumbling and spin

performance.

_ uring the spin cycle, the washer may add additional water to redistribute the clothes and correct an

inbalance inside the drum.

,, To ensure good cleaning result when washing heavily soiled loads, do not overload your washer.

,, When the "Garment+_._" light is ON (see page 24), you can add or remove laundry items during a wash.

1. Press the Start/Pause Button.

2, Wait for the Door Lock light to go out (5 seconds).

3, Add the item, close the door, and press the Start/Pause Button.

After a 10-second pause, the cycle will resume.

_To add items within five minutes of the wash

ensure

thorough cleaning, starting cycle.

WASHING CLOTHES: BASIC INSTRUCTIONS

1. Press the Power button, open the door, and then load the washer.

2, Close the door.

_Push the laundry into the drum completely to prevent the laundry from being caught in the door or

....... from falling out of the drum.

3, Add detergent and additives to the dispenser (see pages 28-29).

4, Select the appropriate cycle and options for the load (see pages 21-23 and 26).

5, Press the Start/Pause Button.

The drum automatically rotates and measures the weight of the laundry without supplying water in

order to adjust the wash time. (The rotating display on the display panel indicates that the weight of the

laundry is being measured.)

6, The Wash Indicator light will illuminate.

7° The estimated cycle time will appear in the display.

The time may fluctuate to indicate the time remaining in the cycle better.

The actual time required for a cycle may differ from the estimated time inthe display depending on the

water pressure, water temperature, detergent, and laundry.

8. Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a

quick drain.

_ hen the cycle is complete, the Door Lock light will go out and "End" will appear in the display.

,, DO NOT attempt to open the door until the Door Lock light is off. To add a forgotten item, see the

"Loading your Washer" section above.

When your washer is restarted after a pause, expect a delay of up to 15 seconds before the cycle

continues.

,, Pressing the Power button cancels the cycle and stops your washer.

,, The Pre Wash, Wash, Rinse, and Spin indicator lights will illuminate during those portions of the

cycle.

ADo not place anything on top of your washer while it is running.

WARNING

20 operatng nstructons

Heav

Bedding PLUS

[] Steam Cycles

Heav

[] Steam Cycles

Ro Cold

EcoCold

Active Wear

_Wool

Qu ck Wash

- Active Wear

Delicates /

Wool

Quick Wash

Rinse+Spin

Power

StaCdPause

®@

Power

Start/Pause

Select the appropriate cycle for the type of load.

This will determine the tumble pattern and spin speed for the cycle.

_To minimize of select the Perm Press

wrinkling laundry, cycle.

Eco Cold - Provides useful, gentle, and energy saving daily care for normally

and lightly soiled laundry using only cold water.

This cylce cleans as effectively as the warm wash setting on the

Conventional Normal* cycle under Normal and Light Soil level options.

(Cleaning performance of Eco Cold cycle may not be equal to conventional

Normal cycle under the heavy soil level option) For best result, we

recommend using for loads of 8 pounds or less.

* Conventional Normal cycle - Normalcycle on previousand existing Samsungfront

loadingwashers releaseduntil2009 without PowerFoam.

Normal - For most fabrics including cottons, linens, and normally soiled

garments.

Heavy Duty - For sturdy, colorfast fabrics and heavily soiled garments.

Bedding PLUS - For bulky items such as blankets, comforters and sheets.

When you are washing bulky items, use liquid detergent

Sanitize - For heavily soiled, colorfast garments. This cycle heats the water to

150 °F to eliminate bacteria.

lf you select pause during the heating portion of the Sanitize Cycle, your

Washer door will remain locked for your safety.

Stain Away - For stained clothes. The Stain Away cycle provides outstanding

stain removal performance, with the utmost gentle care, avoiding the need for

pre-treatment of stains. For best stain removal performance, we recommend

using the hot temperature option in this cycle, in which the wash temperature

is increased using the internal heater, for overall cleaning of a wide variety of

stains.

Deep Steam - For heavily soiled, colorfast garments, this cycle provides a

high washing temperature and steam and is effective for cleaning stains.

wash ng a cad of aundry 21

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Perm Press - For wash-and-wear, synthetic fabrics, and lightly to normally

soiled garments.

Active Wear - Use this cycle to wash exercise wear such as sports jerseys,

training pants, shirts/tops and other performance clothing. This cycle provides

effective soil removal with gentle action for special fabric care.

Delicates/Hand Wash - For sheer fabrics, bras, lingerie silk, and other

handwash-only fabrics. For best results, use liquid detergent.

Wool - For machine-washable wool. Loads should be under 8 pounds. For

best results, we recommend a load of 4.4 pounds or less.

The Wool cycle washes laundry by moving the wash drum horizontally

to maintain the characteristics of the wool fibers and to prevent damage

to the cloth. It then stops for a while to allow the laundry to soak in the

water. This pause in the operation of the Wool cycle is normal.

We recommend you use a neutral detergent to prevent damage to the

cloth and to improve the washing results.

Quick Wash - For lightly soiled garments needed quickly.

Rinse + Spin - Use for loads that need rinsing only or to add rinse-added

fabric softener to a load.

The large Digital Display is easy to use. It provides instructions and

diagnostics while keeping you updated on the cycle status and time

remaining.

Press these buttons to select different cycle options.

Pure Cycle TM - Use to clean dirt and bacteria from the drum. Regular use

(after every 40 washes) is recommended. No detergent or bleach is needed

(see page 33).

Steam - Press this button to use the Steam Wash function. Steam Wash is

available with the Normal, Heavy Duty, Bedding PLUS, Sanitize, Stain Away

and Deep Steam cycles. For heavily soiled, colorfast garments, Steam Wash

improves stain treatment and uses less water (See page 27).

The steam may not be visible during the Steam cycle, and may also not

always be visible while the total steam cycle is being performed.

Delay Start - Any cycle can be delayed for up to 24 hours in one-hour

increments. Displayed hour indicates the time at which the wash will be

started. (See page 25).

Pre Wash - To use this feature, add detergent to the pre wash section of the

detergent compartment. When turned on, the washer fills with cold water and

detergent, tumbles, then drains and advances to the selected wash cycle.

Some cycles cannot be selected with this option (See page 28-29).

You cannot select the prewash option in the Wool, Quick Wash,

Delicates/Handwash and Rinse+Spin cycles.

Extra Rinse - Add an additional rinse at the end of the cycle to remove

laundry additives and perfumes more thoroughly.

Extra Spin - Add additional time to remove more water from loads.

My Cycle - Choose your favorite cycle including temperature, spin, soil level,

options, etc. (see page 25)

Press the button repeatedly to cycle through the different water temperature

options.

Extra Hot - Heavily soiled, colorfast items.

Hot - Whites and heavily soiled, colorfast items.

Warm - Colorfast items. When you select warm rinse, only the final rinse will

be warm.

The other rinses will be cold to conserve energy.

Eco Warm - Moderately soiled, colorfast items, most wrinkle-free items.

Cold - Brightly colored, very lightly soiled items.

22 washng a cad of aundry

Press the button repeatedly to cycle through the different spin speed options.

Extra High - Removes more water from loads during spin.

To minimize wrinkling of wrinkle-free and no-iron fabrics, DO NOT use

the Extra High spin option for these loads, nor overload your washer.

High - Use for underwear, t-shirts, jeans, and sturdy cottons.

Medium - Use for jeans, wrinkle-free, or wash-and-wear items and

synthetics.

Low - Use for delicate items needing a slow spin speed.

No Spin - Drains your washer without spinning. Use for extremely delicate

items that cannot tolerate any spin.

Press the button to select the soil level/washing time. (Light -_ • -_ Normal

-_ _ --> Heavy)

Heavy - For heavily soiled loads.

Normal - For moderately soiled loads. This setting is best for most loads.

Light - For lightly soiled loads.

Press the button to select the signal level.

(Off _ Y _ Softer _ _, _ Louder)

Press to pause and restart programs.

Press once to turn your washer on, press again to turn your washer off. If

the washer is left on for more than 10 minutes without any buttons being

touched, the power automatically turns off.

Child Lock 6

Child Lock prevents children from playing with your washer.

Once you have activated the Child Lock function, the control panel cannot be activated,

preventing children from playing with the washer.

Activating the Child Lock function

Pressand hold both the Soil Level and Signal buttons simultaneously for approximately 3 seconds.

• When you activate the Child Lock function, the door locks and the "Child Lock _" lamp

illuminates.

Ifyou press the Start/Pause button after you have activated the Child Lock function, none of

the buttons will work except for the Power button.

Ifyou press a button when the buttons are locked, the "Child Lock 6" lamp blinks.

Pausing the Child Lock function

When the door is locked or the buttons are locked by the Child Lock function, you can pause

the Child Lock operation for 1 minute by pressing and holding both the Soil Level and Signal

buttons simultaneously for approximately 3 seconds.

Ifyou pause the Child Lock mode temporarily, the door lock is released for 1 minute for user

convenience. During this period, the "Child Lock (_" lamp blinks.

Ifyou open the door after the minute is over, an alarm sounds for up to 2 minutes.

Ifyou close the door within the 2 minutes, the door is locked and the Child Lock function is

reactivated. Ifyou close the door after the 2 minutes, the door is not locked automatically and

no alarm sounds.

wash ng a oad of aundry 23

Deactivating the Child Lock function

Pressand hold both the Soil Level and Signal buttons simultaneouslyfor approximately6 seconds.

• Whenyou deactivatethe Child Lockfunction,the door isunlocked andthe "Child Lock@" is turned off.

/_o TheChild Lockfunction preventschildrenor the infirmfrom accidently operatingthe washerand

....... injuringthemselves.

Ifachild entersthe washingmachine,the child may becometrapped and suffocate.

Once you haveactivated the Child Lockfunction, it continuesworking even ifthe power isturned

off.

Openingthe door by force can resultin injurydueto damageto the product.

z_To add laundryafter you haveactivatedthe Child Lockfunction, you must first pause or deactivatethe

....... Child Lockfunction.

Ifyou want to openthe door of the washing machinewhen the ChildLock function isactivated:

Pauseor deactivatethe Child Lock function.

Turnthe washing machineoff and then on again.

Spin Only

Ifyou press the Power button and then press and hold the Spin button for 2 seconds, the spin

time will be displayed on the display panel.

Then, press the Spin button repeatedly until the required spin level is selected, and then press

the Start/Pause button.

Before pressing the Spin Only button to use the Spin Only function, you can select a cycle

with the Cycle Selector. Ifyou have selected a cycle, you can only select the spin level

corresponding to the selected cycle.

Garment+ _+

You can add or take out laundry items even after the wash has started, as long as the

"Garment+_+" light is on. Pushing the Start/Pause button unlocks the door, unless the water is

too hot or if there is too much water in your washer. Ifyou are able to unlock the door and wish

to continue the wash cycle, close the door, and then press the Start/Pause button.

Delay Start

You can setthe washingmachineto startyour wash automaticallyat a latertime, choosing adelay time.

The hour displayed indicatesthe time at which the wash will be started.

1. Set yourwash course.

2. Pressthe Delay Start button repeatedly untilthe delay time is set.

3. Pressthe Start/Pause button.The "Delay Start _" indicator will be lit, andthe clock willbegin

counting down until it reachesthe set time.

4. Tocancel a DelayStart function, pressthe Power buttonand thenturn the washing machineon again.

24 washn9 a oad of aundry

My Cycle

Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one-button

convenience. By pushing the My Cycle button, you activate the settings used during the My

Cycle mode. The "My Cycle" light goes on, indicating activation. You can select all options as

follows in "My Cycle" mode.

1. Press the My Cycle button on the Control Panel.

2. Select the cycle using the Cycle Selector dial.

3. After cycle selection, set each option.

[_See 39 for available option settings with each cycle.

page

4. Start "My Cycle" by pushing the Start/Pause button in "My Cycle" mode.

The washer will display the cycle and options you selected the next time you choose "My

Cycle".

You can change the "My Cycle" settings by repeating the process above.

The washer displays the last settings used the next time you choose "My Cycle".

To program "My Cycle" settings into your washer, the washer needs to complete an entire

wash cycle. If for any reason the wash cycle is interrupted and the washer does not finish

the cycle, it will not program in the settings for later use.

Smart Care

This function enables you to check the status of the washing ........................................

machine using a smartphone.

1. Press and hold the Smart Care button for 3 seconds to

use the Smart Care function when an error occurs or if you

do not press any buttons since you turn on the washer.

The error code history is deleted after using the function.

Ifthe Smart Care function is activated, the LED on the

window display rotates for 2 or 3 seconds and then the

Smart Care indicator is lit on the display.

Run the Smart Care app on your smart phone.

• The Smart Care function is optimized with Galaxy S, Galaxy $2, iPhone 4 and iPhone 4S.

4. Focus your smart phone's camera on the display panel of the washing machine.

5. If the smart phone's camera is focused on the display panel of the washing machine,

the panel and error message is automatically recognized and the error type and

countermeasures are displayed on the smart phone.

6. If the smartphone fails to recognize the error code more than twice, please enter the error

code displayed on the display panel of the washer manually into the Smart Care app.

(_ Downloading the Smart Care app

• Download the Samsung Laundry App into your mobile phone

from the Android market or Apple App store. (Search word :

Samsung Smart Washer/Dryer}

[_ Precautions when Smart Care

using

Iflight from a light bulb, fluorescent bulb, or lamp is reflected on

the display panel of the washing machine, the smartphone may

not be able to recognize the panel or error mesage easily.

Ifyou hold the smartphone at too large an angle relative to the

front of the display panel, it may not be able to recognize the error

code. For best results, hold the smartphone so that the front of

the panel and the smartphone are parallel or nearly parallel.

wash nga cad of aundry 25

DEEP STEAM

DEEPSTEAM(MagicSteam)

The DeepSteamfeature boosts cleaningperformanceand loosensgrime anddirt, providingsuperior

cleaningresults.

Forheavilysoiled,colorfast garments, this cycle provides a high washingtemperature andsteam and is

effectivefor cleaningstains.

How DEEPSTEAMworks

Ifyou selectsteam, the steam acts atthe most effectivetimes for the detected amount of laundry,

maximizingthe effectof the steam, increasingthe washtemperature, enhancingthe Soak effect, and

improvingwash performance.

PressSteam button to usethe SteamWashfunction. SteamWash isavailablewith the Normal, Heavy

Duty, Bedding PLUS,Sanitize,Stain Awayand Deep Steamcycles. Forheavilysoiled, colorfast garments,

SteamWashimprovesstain treatment anduses lesswater.

Washertakes smallamounts of water intub and Heaterheatswater into evaporation.

Tousethe Steamfunction, performthe following steps:

1. Loadthe washer.

2. Pressthe Powerbutton.

3. Turnthe CycleSelector and select a SteamCycle. (TheDeepSteam course automaticallyselects

Steam.)

4. Pressthe Steam button.

5. Add detergentto the dispensertray andadd fabricsoftener up to the marked line.

6. Pressthe Start/Pausebutton.

Thewasher automaticallyselectsthe optimal wash conditions by sensingthe weight ofthe laundry.

The steam may not be visibleduringthe Steam cycle, and may also not alwaysbe visiblewhile the

total steamcycle isbeing performed.

This is normal.

Z_ * Toomuch steamcould damageclothing. Do not use steamwith delicatefabricssuch as wool, silk

....... or easilydiscolored fabrics.

Steam may notbe present during entiresteam washcycle.

Do not touch the door. Thedoor surface can becomevery hot.

Washing clothes using the cycle selector

Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control"

automatic control system. When you select a wash program, the machine will set the correct

temperature, washing time, and washing speed.

1. Turn on your sink's water tap.

2. Press the Power button.

3. Open the door.

4. Load the articles of clothing one at a time loosely into the drum, without overfilling it.

5. Close the door.

6. Add detergent, softener, and pre-wash detergent (ifnecessary) into the appropriate

compartments.

Pre-wash is only available when selecting the Eco Cold, Normal, Heavy Duty, Perm Press,

Sanitize, Stain Away, Deep Steam, Active Wear and Bedding PLUS cycles. It is only

necessary if your clothing is heavily soiled.

26 washng a cad of aundry

2, Use the Cycle Selector to select the appropriate cycle according to the type of material:

Normal, Heavy Duty, Perm Press, Sanitize, Bedding PLUS, Deep Steam, Stain Away,

Active Wear, Delicates/Hand Wash, Wool, Quick Wash, Rinse+Spin, Eco Cold. The relevant

indicators will illuminate on the control panel.

8, At this time, you can control the wash temperature, the number of rinse cycles, the spinning

speed, and the delay time by pressing the appropriate option button.

9, Press the Start/Pause button on the Cycle Selector and the wash will begin. The process

indicator will light up and the remaining time for the cycle will appear in the display.

Pause Option

1, When the "Garment+_+" light is ON, you can add or remove laundry items.

2. Press the Start/Pause button to unlock the door.

You cannot open the door when the water is too HOT or the water level is too HIGH.

3, After closing the door, press the Start/Pause button to restart the wash.

USING STEAM WASH

Ifyou select steam, the steam acts at the most effective times for the detected amount of laundry,

maximizing the effect of the steam, increasing the wash temperature, enhancing the Soak effect, and

improving wash performance.

1. Load the washer.

2. Press the Power button.

3. Turn the Cycle Selector and select a Steam Cycle. (The Deep Steam course automatically selects

Steam.)

4. Press the Steam button.

5. Add detergent to the dispenser tray and add fabric softener up to the marked line.

6. Press the Start/Pause button.

: The washer automatically selects the optimal wash conditions by sensing the weight of the laundry.

_ team may not necessarily be visible during the steam cycles. Steam may not be present during the

entire steam wash cycle.

ATC (AUTO TEMPERATURE CONTROL)

ATCis the control function that the washer controls watertemperaturewith temperaturesensor (thermistor).

_ ecause there are numerous water temperatures depending on the customer's environments(cold

areas, warm areas, various water temperature, settings of heater temperature, etes), ATC function in

our washer maintains the certain level of wash temperature to output the best washing performance at

each cycle.

lf you select normal & heavy duty course, those courses are the regulation and UL course. Since new

washer must reduce the amount of energy usage at first priority, customer will notice more cold water

entering the washer. But This is Normal, not a problem.

ln those regulation course, Hot temperature is similar to acceptable adult bath-water temperature and

warm temperature is similar to comfortable swimming-pool water temperature.

Ifcustomer want to wash clothes in specific water temperature, customer should choose a different

course at each temperature(Hot/Warm/Eco Warm)

wash nq a oad of aundrv 27

DETERGENT USE

Your Washer is designed to use high efficiency (HE)detergents.

,, For best cleaning results, use a high efficiency detergents such as

Tide HE, Wisk HE, Cheer HE, or Gain HE*. High efficiency detergents

contain suds suppressors that reduce or eliminate suds. When fewer

suds are produced, the load tumbles more efficiently and cleaning is

maximized.

/_ Regular detergent is NOT recommended. Please use HE detergents

w%"_,,,only.

_ educing the amount of detergent may reduce the quality of cleaning. It is important to pre-treat

stains, sort carefully by color and soil level, and avoid overloading.

* Brand names are trademarks of their respective manufacturers.

FEATURES

Automatic dispenser

Your washer has separate compartments for dispensing

detergent and color-safe bleach, chlorine bleach, and

fabric softener. Add all laundry additives to their respective

compartments before starting your washer.

The automatic dispenser MUST ALWAYS be in place before

you start your washer.

DO NOT open the automatic dispenser when your washer is

running.

Usage Pointers:

,, Never exceed the manufacturer's recommendations when

adding detergent.

,, This compartment holds liquid detergent for the main wash

cycle, which the washer adds to the load at the beginning

of the cycle.

_ efore using powdered detergent, remove the Liquid

Detergent holder from the compartment. Powdered

detergent will not dispense from the Liquid Detergent

holder.

----I Liquid Detergent

•......q Pre wash

compartment

Detergent compartment

,, Pour the recommended amount of laundry detergent directly into the detergent compartment

before starting your washer.

28 wash nga oad of aundry

Pre wash compartment

When using the Pre Wash option, add detergent to both the Pre Wash compartment and the

detergent compartment. The washer will automatically dispense the detergent during Pre Wash.

Ifyou use a high efficiency (HE) detergent, add 1/3 of the recommended amount to the Pre

Wash compartment and 2/3 of the recommended amount to the detergent compartment.

Bleach compartment

(Liquid chlorine bleach only)

1. Add chlorine bleach to the bleach compartment.

DO NOT exceed the MAX FILL line.

2. Avoid splashing or over-filling the compartment.

3. Your washer automatically dispenses bleach into the tub at

the appropriate time.

4. The dispenser automatically dilutes liquid chlorine bleach

before it reaches the wash load.

Fabric Softener

compartment

BLeach i,--

compartment

Never pour undiluted liquid chlorine bleach directly onto

the load or into the tub. Itis a powerful chemical and __.

can cause fabric damage, such as weakening of the

fibers or color loss, if not used properly.

Oxi-type boosters or color-safe bleach can be added to

the drum prior to adding laundry.

Put the laundry into the drum only after confirming

that the oxi-type boosters or color-safe bleach has

completely entered the hole of the drum.

To use powdered detergent and powder oxi-type

boosters or powdered color-safe bleach at the same

time, it is more effective to put them in the drum

together before adding the laundry. When you use

powdered detergent, remember to remove the Liquid

Detergent holder from the detergent compartment.

Fabric softener compartment

1. Pour the recommended amount of liquid fabric softener into the softener compartment.

For smaller loads, use less than one capful.

2. Dilute the fabric softener with water until it reaches MAX FILL in the compartment.

3. The dispenser automatically releases liquid fabric softener at the proper time during the rinse

cycle.

_ se the softener compartment ONLY for liquid fabric softeners.

DO NOT use a Downy Ball* in the Fabric softener compartment of this washer. It will not

be added at the appropriate time.

Use the detergent compartment.

* Brand names are trademarks of their respective manufacturers.

lf you overfill the detergent, bleach, or softener compartments, the contents of the

compartment will automatically be released into the washer. This could damage any

garments that are in the drum.

wash nga cad of aundry _29

CLEANING THE EXTERIOR

Turn off the water faucets after finishing the day's washing.

This will shut off the water supply to your washer and prevent the unlikely possibility of damage from

escaping water. Leave the door open to allow the inside of your washer to dry out.

Use a soft cloth to wipe up all detergent, bleach or other spills as they occur.

Clean the following as recommended below:

Control Panel - Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads. Do not spray

cleaners directly on the panel.

Cabinet - Clean with soap and water.

CLEANING THE INTERIOR

Clean the interior of your washer periodically to remove any dirt, soil, odor, mold, mildew, or bacterial

residue that may remain in your washer as a result of washing clothes.

Failureto follow these instructions may result in unpleasant conditions, including odors and/or permanent

stains on your washer or laundry.

Hard water deposits may be removed, if needed. Use a cleaner labeled "Washer safe".

CLEANING THE DISPENSERS

You may need to clean the automatic dispenser periodically to remove

laundry additive buildup.

1. Pull out the Liquid Detergent holder from the detergent compartment.

2. Remove the siphon cap from the fabric softener and bleach

compartments.

3. Wash all of the parts under running water.

4. Clean the dispenser recess with a soft brush.

5. Reinsert the siphon cap and push it firmly into place.

6. Push the Liquid Detergent holder back into place.

7. Run a Rinse+Spin cycle without any load in your washer.

Siphon cap

STORING YOUR WASHER

Washers can be damaged if water is not removed from hoses and internal components before storage.

Prepare your washer for storage as follows:

,, Select the Quick Wash cycle and add bleach to the automatic dispenser. Run your washer through the

cycle without a load.

,, Turn the water faucets off and disconnect the inlet hoses.

* Unplug your washer from the electrical outlet and leave your washer door open to let air circulate inside

the tumbler.

* Ifyou store your washer in below-freezing temperatures, make sure you allow time for any leftover water

in your washer to thaw before use.

30 maintainng your washer

CLEANING THE DEBRIS FILTER

We recommend cleaning the debris filter when water does not drain well or the "nd" error message is displayed.

1. Open the filter cover by pressing and then pulling the handle of_thefilter cover with your finger.

2. Holding the drain cap, pull the drain tube that

is hooked on the guide hook to the front. Do

not pull the drain tube with excessive force.

3. Place a bowl under the washing machine to

catch any remaining water. Then, hold the

drain tube with one hand, and turn the drain

cap counter clockwise with the other hand to

separate it from the drain tube.

4. Drain the remaining water completely.

step 1 step2

Turn the debris cap counterclockwise, and then pull

the debris cap and debris filter assembly out of the

washer.

Debris filter ca

Wash any dirt or other material from the

debris filter. Make sure the drain pump

propeller behind the debris filter is not

blocked.

Debris filter cap

Debrisfilter

7. When you have finished cleaning the filter, insert the debris

cap and filter assembly back into the washer. Turn the

debris filter cap clockwise until the indicator on the debris

filter cap is in the 12 o'clock position, pointing to the

indicator on the washer.

8. Re-attach the emergency drain cap to the drain tube, and

then hook the tube to the hook guide.

9. Re-install the filter cover.

maintainng your washer 31

CLEANING THE DOOR SEAL/BELLOW

1. Open the washer door and remove any clothing or items from the washer.

2. Check if there are any foreign substances on the grey seal/

bellows (9 between the lid and the drum.

Tocheck this, turn the seal/bellows @out.

3. If there are any foreign substances, remove them.

4, Ifyou find stained areas, wipe them down using the procedure below:

a} Carefully combine s4cup (177 mL) of liquid chlorine bleach with 1 gal. (3.8 L) of warm

tap water.

b} Wipe the seal/bellow area with the dilute solution using a damp cloth.

c) Let stand 5 minutes.

d} Wipe down the area thoroughly with a dry cloth and let the washer interior air dry with

the door open.

IMPORTANT:

Wear rubber gloves when cleaning for prolonged periods.

Refer to the bleach manufacturer's instructionsfor proper use.

PRESERVING THE TOP COVER AND THE FRONT FRAME

Do not place any heavy or sharp objects or a detergent box on the washing machine. They can scratch or

damage its top cover. Keep them in the pedestal (if purchased) or in a separate storage box.

_ ince the entire washing machine has a high-gloss finish, the surface can be scratched or damaged.

Avoid scratching or damaging the surface when using the washing machine.

32 maintainng your washer

PURE CYCLE TM

Pure Cycle is a self cleaning cycle that removes mold that may occur inside the washing machine.

1. Press the Power button.

2. Press the Pure Cycle TM button,

Once the Pure Cycle button is pressed, the only

function that can be set is Delay Start,

3. Press the Start/Pause button,

When you press the Start/Pause button, Pure Cycle

begins,

Pur_

0 Cyd_

Using Pure Cycle, you can clean the drum without using a cleansing agent,

Never use Pure Cycle when laundry is in the washing machine, It may cause damage to the

laundry or a problem with the washing machine,

If you want to use a drum cleansing agent, use only 1110 of the amount of the drum

cleansing agent recommended by the cleansing agent manufacturer. (When using a

powder-type cleansing agent, remove the liquid detergent compartment.)

_The Pure Cycle Auto indicator Function

Ifthe "Pure Cycle" button is lit after a wash, it indicates

that tub (drum) cleaning is required. In this case, remove

the laundry from the washing machine, turn the power on,

and clean the drum by running Pure Cycle.

Ifyou do not run Pure Cycle, the "Pure Cycle" indicator

turns off. However, the "Pure Cycle" indicator will light

again after two washes. Not running Pure Cycle at this

point will not cause a problem with the washing machine,

Although the Pure Cycle Auto Indicator appears once a

month or so, the frequency may differ depending on the

number of times the washing machine is used,

r t

........

, ) ................ .........

)

your wasll'er 33

CHECK THESE SOLUTIONS IF YOUR WASHER...

Will not start.

,, Make sure the door is firmly closed.

Make sure your washer is plugged in.

Make sure the water source faucets are open.

Make sure to press the Start/Pause Button to start your washer.

Make sure the Child Lock is not activated. See page 24.

Before your washer starts to fill, it will make a series of clicking noises

to check the door lock and do a quick drain.

,, Check the fuse or reset the circuit breaker

Turn both faucets on fully.

Make sure the door is tightly closed.

,, Straighten the water inlet hoses.

,, Disconnect hoses and clean the screens. Hose filter screens may be

clogged.

Open and close the door, then press the Start/Pause Button.

Make sure your washer is running with sufficient water pressure.

Make sure the Detergent Selector dial is in the upper position when

using granular detergent.

Has no water or not enough

water.

Has detergent remains in

the automatic dispenser

after the wash cycle is

complete.

Vibrates or is too noisy. ,,

Stops

Make sure your washer is set on a level surface. If the surface is not

level, adjust your washer feet to level the appliance.

Make sure that the shipping bolts are removed.

Make sure your washer is not touching any other object.

Make sure the laundry load is balanced.

,, Plug the power cord into a live electrical outlet.

,, Check the fuse or reset the circuit breaker.

Close the door and press the Start/Pause Button to start your

washer.

For your safety, your washer will not tumble or spin unless the door is

closed.

Before your washer starts to fill, it will make a series of clicking noises

to check the door lock and do a quick drain.

,, There may be a pause or soak period in the cycle. Wait and it may

start.

,, Check the screens on the inlet hoses at the faucets for obstructions.

Clean the screens periodically.

34 troubleshooting

Fills with the wrong

temperature water.

Door locked or will not

open.

Does not drain and/or spin.

Load is too wet at the end •

of the cycle.

Leaks water.

Has excessive suds.

Has an odor.

,, Turn both faucets on fully.

,, Make sure the temperature selection is correct.

,, Make sure the hoses are connected to the correct faucets.

Flush water lines.

,, Check the water heater. It should be set to deliver a minimum 120 °F

(49 °C) hot water at the tap. Also check the water heater capacity

and recovery rate.

,, Disconnect the hoses and clean the screens. The hose filter screens

may be plugged.

As your washer is filling, the water temperature may change as

the automatic temperature control feature checks incoming water

temperature. This is normal.

While your washer is filling, you may notice just hot and/or just

cold water going through the dispenser when you have selected

cold or warm wash temperatures. This is a normal function of the

automatic temperature control feature as your washer determines the

temperature of the water.

Press the Start/Pause Button to stop your washer.

Your washer door will remain locked during the heating portion of the

Sanitize Cycle

It may take a few moments for the door lock mechanism to

disengage.

,, Check the fuse or reset the circuit breaker.

,, Straighten the drain hoses. Eliminate kinked hoses. Ifthere is a drain

restriction, call for service.

Close the door and press the Start/Pause Button. For your safety,

your washer will not tumble or spin unless the door is closed.

Make sure the debris filter is not clogged.

Use the High or Extra High spin speed.

Use high efficiency detergent to reduce over-sudsing.

The load is too small. Very small loads (one or two items) may

become unbalanced and not spin out completely.

Make sure the door is firmly closed.

,, Make sure all hose connections are tight.

Make sure the end of the drain hose is correctly inserted and secured

to the drainage system.

Avoid overloading.

,, Use high efficiency detergent to prevent over-sudsing.

,, Reduce the detergent amount for soft water, small or lightly soiled

loads.

,, Non-HE detergent is NOT recommended.

,, Excessive suds collect in nooks and crannies and can cause foul

odors.

Run cleansing cycles to sanitize the machine periodically. (Silver Care

or Sanitize Cycle or Pure Cycle)

Clean the door seal (Diaphragm).

,, Dry the interior of your washer after the total cycle has finished.

troub eshooting 35

tro Abe hoot ncj

INFORMATION CODES

The washer may display information codes to help you better understand what is occurring with your

washer.

FI,.

HI"

Unbalanced load prevented your

washer from spinning.

Door is open when washer is running.

Your washer failed to lock the door.

This error code appears when the

heater is 96 °C or above.

Your washer has tried to fill, but has not

reached the proper water level.

Redistribute the load, press the Start/

Pause button.

Closethe door tightlyand restartthe cycle.

If the code reappears, call for service.

Close the door tightly and restart the

cycle.

If the code reappears, call for service.

Call for service.

Leak problem or Waterlevel Sensor has Call for service.

/EIII=} an abnormal reading.

The door will not unlock.

Your washer is not draining.

It can also mean that the unit senses a

small clog while draining.

Your washer has tried to fill but was

unsuccessful.

Check if the hot water supply hose is

connected.

Make sure the door is firmly closed.

Press the Power button to turn off your

washer, then turn it on again. If the

code reappears, call for service.

Clean the drain filter. Then, clean the

debris filter (See page 31).

If you are in the middle of a wash you

can try this first:

1. Turn off the unit for 10 seconds and

then turn it on again.

2. Select the Spin Only cycle (See page

24).

3. Press the Start/Pause to drain the

water.

If it still does not drain, call for service.

Make sure the water faucets are open all

the way. Check for kinked hoses.

Check the inlet screens on the fill hoses.

Ifyou use a Flood Safety Device, then

slease remove the device and connect

the water hoses directly to the unit.

You must connect the hot water supply

hose because hot water is supplied by

the Auto Temperature Control (A.T.C.)

function if the temperature of the cold

water is lower than 59°F.

36 troubleshooting

nF1

SUdS

This error code appears when the

water temperature is 80 °C or above

for 8 seconds or longer in the Wool and

Delicate course.

Water detected over the safe water

level.

Jammed key.

Temperature sensor problem.

Motor problem.

Communication error between SUB

PBA and MAIN PBA

System error

Too many suds are detected during the

washing session.

The unit is put on hold until the suds

are reduced. Then, the unit will go back

into the operation.

When it finishes washing, "End" and

"SUDS" codes will blink in turn.

Please connect the hot/cold water hose

connection correctly.

Call for service

Restart the cycle.

If the code reappears, call for service.

Restart the cycle.

If the code reappears, call for service.

Call for service

Reduce the amount of detergent you

use.

For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG)

troub eshootin9 _37

appendx

FABRIC CARE CHART

The bllowing symbols provide garment care direction. The Clothing care labels include symbols for

washing, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures

consistency among garment manufacturers of domestic and imported items. Follow care label directions to

maximize garment life and reduce laundering problems.

iiii!!!!iA:iii@i{{{{{i{{{{{{{{{{{{{{{{ii{{{{{i@#ss S(SSii¸

Permanent Press /

Wrinkle Resistant /

Wrinkle Control

Gentle/Uelicates

BandWash

Hot

co Warm

. Cold O

Line Dry/Hang to Dry Do Not Wash

[] Drip Dry

Dry Flat

High

Medium

Low

Any Heat

Do Not Wring

Do Not Bleach

Do Not Tumble Dry

No Steam (added to

iron)

Do Not Iron

O Dry Clean

No Heat/Air

Any Bleach (when

needed)

Only Non-Chlorine

(color-safe) High [] Drip Dry

Bleach (when needed)

Tumble Dry Cycle _ Medium Dry Flat

Low

PermanentPress/

Wrinkle Resistant/

Wrinkle Control

Gentle/Delioates

Do Not Dry Clean

Line Dry/Hang to Dry

** The dot symbols represent appropriate wash water temperatures for various items. The temperature

range for Hot is 105° - 125 °F / 41° _52 °C, for Warm 85° - 105 °F / 29° - 41 °C and for Cold 60° - 85 °F

/ 16° - 29 °C. (Wash water temperature must be a minimum of 60 °F / 16 °C for detergent activation and

effective cleaning.) The clothes washer can not ensure these temperatures because the actual temperature

of the water entering your washer is dependent on water heater settings and regional water supply

temperatures. For example, cold water entering the home in the northern states during winter may be

40 °F / 4 °C which is too cold for effective cleaning. The water temperature in this situation will need to be

adjusted by selecting a warm setting, adding some hot water to the MAX FILL line or using your washer's

heating option, if available.

38 appendix

CYCLE CHART

Use this chart to set the best cycle and option for you laundry.

Model: WF405ATPA** / WF398ATPA**

( • ' factory setting, _ ' selectable )

Normal _ ® _ _ _ ® _ _ _ _ _ ® _ _

Heavy Duty ® _ _ _ ® _ _ _ _ ® _ _ _ _

Bedding PLUS ...................

Sanitize ® ® _ _ _ _ _ _ ® _ _

Stain Away _ ® _ _ ® _ _ _ _ ® _ _ _ _

Deep steam ® ® _ _ _ _ ®

Rinse+Spin ® ® _ _ _ _

Quick Wash _ ® _ _ _ ® _ _ _ _ _ _ _ ®

Delicates/Hand Wash _ _ ® ® _ _ _ ® _ _

Active Wear ® _ _ _ ® _ _ _ ® _ _

Perm Press ® _ _ _ _ ® _ _ _ ® _ _

Eco Cold _ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷

Pure Cycle ® ®

Norrnal

Heavy Duty

Bedding PLUS

Sanitize

Stain Away

Deep steam

Rinse+Spin

Quick Wash

Wo01

Delicates/Hand Wash

Active Wear

Perm Press

5C0Co_d

Pure Cycle

® ®

EH: Extra Hot EH: Extra High H: Heavy

H: Hot H: High

W: Warm M: Medium N: Normal

EW: Eco Warm L: Low

C: Cold NS: No Spin L: Light

append x 39

a_ppondx

Model: WF397UTPA**

( • ' factory setting, _ ' selectable )

Heavy Duty ® _ _ _ ® _

Bedding PLUS ® _ _

Sanitize ® ® _

Stain Away _ ® _ _ ® _

Deep steam ® ® _

Rinse+Spin ® ® _

Quick Wash _ ® _ _ _ ®

Wool ® _ _

Delicates/Hand Wash _ _ ®

Active Wear ® _ _

Perm Press ® _ _ _

Eco Cold ® _, ®

Pure Cycle ®

® ® ®

iiiii%iiiiiiiiiiiiiiiii!_i;il;iii!!!!!Jiiiii,ii;iiiiiill!i!!!!!!!!!!!!!!!!!!!!!!!!!!!!!_iiiiiiii_i_i_i_i_!!i!i!i!i_i!i!i!i!iiiiiiiiiiiii!i_i_i_j_%iliii!ii%!!i!iliii!_!iii!i!i!%!iiii!i!i!i!;iii!i!ii!,_!i!i!i!i!i!i!ji!i!i!i_!_%!ili!ililiiiii!,!!i!i!i!i!i!,i!!i!i!i!i!ii!i_i_%i!i!i!i!i!i!,i!i!i!i!i!l!i!i!i!i!i!i!i!i!_i_i_i_;!!!!!!!i!iii!i!i!ili!;!_!_!_i_i_i!iiii!i!i!!!i!i!i!,i!i!i!i!i!i!i!i!!!i!i!i!i!!!i_!!i!i!i!iiiiili!,_i_i_i!iiii!i!i!ii_i;_!_iii_!_iiiiiii_ii!ii!ii!ii!ii_iiiiii_i_!i_i_!i!!ii!ii!iiiiiiiiiiiiiiii!ilii!i!!_!!i!ii!ii!iiiii!ii!ii!ii!ii!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_ii_ii_ii_ii_ii!i!ii!ii!ii!ii!ii_iii_iiii_i_ii_ii_ii!ii!ii!ii!i!i!i!ii!ii!ii!iiiiili!ili!i!ililili!iii_i!ii!ii!i!i!i!iiiiil;ii_i!iii!iiiiiiiliiiiliiiiiii_i_!i!i!i!!i!i_!i!ii!ii!ii!i!iii!ii_i;ii_ii!i!ili!_iiii!iiii!ii!ii!i_ii!_!!i!_i!ii!ii!iiiiiiiiiiii_iiii_ililiiii!i!iiiii_!iiiii_iii!i_iiiiiiii!i!ili_i_iiiii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!iii_i_ii!i!!i!i_!i!ii!ii!iii!_i!iii_ii_ii_i_i!_!i,i!i_!_iiii!iili_ii_ii_!_!i_i!i_i_!_!_i_i!iii_iii_i_ii_iiii_ii!_!iiii_!_i_i_i_i!i_i_ii!ii_iiiiill

!i !i !i !i !i !i !i !iii!ii B!i!!ii i ii ii jiiiili iil;i :ili¸iiiii !i!i!i!i!i!ii!ii!i!!ii!i i !ilili! i!i !!i!!i!!i!iiiiiiiiiiii!i!ili!iiiiiiiiiiiiiiiiiiiiiiiiiiiii i ' iiiiiiiiiiiiiii!;ililililili i 'i i !i ii ii' ! i i ii'ii'ii'ii'ii'i!i!il¸

Normal _ _ _ _ _ _ _ _

Heavy Duty

Bedding PLUS

Sanitize

Stain Away

Deep steam

Rinse + Spin

Quick Wash

Wool

Delicates/Hand Wash

Active Wear

Perm Press

Pure Cycle _ _

EH: Extra Hot EH: Extra High H: Heavy

H: Hot H: High _k

W: Warm M: Medium N: Normal

EW: Eco Warm L: Low Y

C: Cold NS: No Spin L: Light

40 appendix

HELPING THE ENVIRONMENT

Your washer is manufactured from recyclable materials. Ifyou decide to dispose of it, please observe

local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected

to a power source. Remove the door so that animals and small children cannot get trapped inside the

appliance.

Do not exceed the detergent quantities recommended in the detergent manufacturers' instructions.

Use stain removal products and bleaches before the wash cycle only when necessary.

Save water and electricity by only washing full loads (the exact amount depends upon the program used).

DECLARATION OF CONFORMITY

This appliance complies with UL2157.

SPECIFICATION

DIMENSIONS' ...... Div ' ..... Inches (cm)

A. Height-Overall 38.7" (98.4)

B. Width 27" (68.6)

C. Depth with door open 90° 51.7" (131.4)

D. Depth 32.3" (82.0)

WATER PRESSURE

WEIGHT

HEATER RATING

POWER

CONSUMPTION

WF405ATPA / WF397UTPA

WF398ATPA**

WASHING

WASHING AND HEATING

SPIN

DRAIN

20-116 psi(137-800 kPa)

88 kg (194 Ib)

96 kg (212 Ib)

SPiN REVOLUTION

9OOW

120V

1200 rpm

25O W

1100W

600 W

80/32 W

append x 41

SAMSUNG WASHER

LiMiTED WARRANTY TO ORiGiNAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.

(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by

SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:

One (1)year part and labor, Two (2)years Control Board Parts (Part Only), Three (3)years stainless tub part

(Part Only), Five (5)years washing motor part (Part Only), Ten (10) years washing DD motor part (Part Only)

This limited warranty begins on the original date of purchase, and is valid only on products purchased and

used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem

determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized

service center. The original dated bill of sale must be presented upon request as proof of purchase to

SAMSUNG or SAMSUNG's authorized service center. SAMSUNG will provide in-home service during the

warranty period at no charge, subject to availability within the contiguous United States. In-home service is

not available in all areas.

To receive in-home service, product must be unobstructed and accessible to the service agent. Ifservice

is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized

service center.

SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein,

with new or reconditioned parts or products if found to be defective during the limited warranty period

specified above. All replaced parts and products become the property of SAMSUNG and must be returned

to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90)

days, whichever is longer.This limited warranty covers manufacturing defects in materials and workmanship

encountered innormal, noncommercial use of this product and shall not apply to the following: damage

that occurs in shipment; delivery and installation; applications and uses for which this product was not

intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect,

fire, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services,

parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied

or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical

line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions,

maintenance and environmental instructions that are covered and prescribed in the instruction book;

product removal and reinstallation; problems caused by pest infestations. This limited warranty does not

cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses, house

wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant

uninterrupted or error-free operation of the product.

42 warranty

EXCEPT AS SET FORTH HEREIN, THERE ARE NO WARRANTIES ON THIS PRODUCT EITHER EXPRESS

OR IMPLIED, AND SAMSUNG DISCLAIMS ALL WARRANTIES INCLUDING, BUT NOT LIMITED TO,ANY

IMPLIED WARRANTIES OF MERCHANTABILITY, INFRINGEMENT OR FITNESS FOR A PARTICULAR

PURPOSE.

NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WITH RESPECT

TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS

OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY

TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED,

AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE

PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE.

WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS,

DAMAGE, OR INJURY TO PURCHASER AND PURCHASER'S PROPERTY AND TO OTHERS AND THEIR

PROPERTY ARISING OUT OF THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT. THIS LIMITED

WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS

PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation

of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This

warranty gives you specific rights, and you may also have other rights, which vary from state to state.

To obtain warranty service, please contact SAMSUNG at:

Samsung Electronics America, inc.

85 Challenger Road Ridgefield Park, NJ 07660

1-800-SAMSUNG (726-7864)

www.samsung.com/us/support

Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty.

Please contact your Samsung call agent for help with any of these issues.

warranty 43

SAMSUNG WASHER

LiMiTED WARRANTY TO ORiGiNAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC.

(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by

SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:

One (1)year part and labor, Ten (10) years washing DD motor (Part only)

This limited warranty begins on the original date of purchase, and is valid only on products purchased

and used in the Canada. To receive warranty service, the purchaser must contact SAMSUNG for problem

determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized

service center. The original dated bill of sale must be presented upon request as proof of purchase to

SAMSUNG or SAMSUNG's authorized service center. SAMSUNG will provide in-home service during the

warranty period at no charge, subject to availability within the Canada. In-home service is not available in all

areas.