Seagate FD 8TB DVR Expander External Hard Drive Guía del usuario
- Tipo
- Guía del usuario
WWW.SEAGATE.COM
Consulte nuestras páginas de asistencia técnica para recibir ayuda sobre:
• Instalación: Instrucciones adicionales y asistencia para la resolución de problemas
• Base de conocimientos: Preguntas más frecuentes y modo de utilización de este producto
• Información de garantías
• Y todas sus demás necesidades de almacenamiento
Para obtener datos de contacto, consulte nuestra página Contacto.
NOTA: Consulte al proveedor de servicios si su DVR o receptor es compatible con la unidad Seagate DVR Expander.
No todos los proveedores de servicios han habilitado sus DVR o receptores para que funcionen con la unidad
Seagate DVR Expander. Es posible que su proveedor de servicios aplique un cargo adicional por habilitar la unidad
Seagate DVR Expander.
WWW.SEAGATE.COM
Visite nossas páginas de Suporte para obter ajuda com:
• Instalação: instruções adicionais e assistência para solução de problemas
• Base de Conhecimento: perguntas frequente e como utilizar este produto
• Informações sobre garantia
• E todas as suas necessidades de armazenamento
Para entrar em contato com o suporte, visite nossa página Contact Us (Entre em contato conosco).
NOTA: verique com o provedor de serviços a compatibilidade do DVR ou do receptor com a unidade Seagate DVR
Expander. Nem todos os provedores de serviços ativaram seu DVR ou receptores para funcionarem com a unidade
Seagate DVR Expander. Seu provedor de serviços poderá cobrar taxas adicionais para ativar sua unidade Seagate
DVR Expander.
Seagate DVR Expander QSG-PANAM
Part Number: 100685546B
Folded Size: 122mm W x 155mm H
Trim Size: 244mm W x 310mm H
Colors: 2C/2C
K
CYAN
Seagate DVR Expander QSG-PANAM
WWW.SEAGATE.COM
Visit us at our Support pages for assistance with:
• Installation: Additional instructions and troubleshooting assistance
• Knowledge Base: FAQ’s, How to use this product
• Warranty Information
• And all of your other storage needs
To contact support, visit us at our Contact Us page.
NOTE: Check with your service provider for compatibility of your DVR or receiver with the Seagate DVR Expander
drive. Not all service providers have enabled their DVR or receivers to work with the Seagate DVR Expander drive.
Your service provider may charge additional fees to enable your Seagate DVR Expander drive.
FCC DECLARATION OF CONFORMANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
CLASS B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modications made to this equipment may void the user’s authority to operate this equipment.
WWW.SEAGATE.COM
Consultez les pages de support technique de notre site pour toute question relative aux points suivants :
• Installation : instructions supplémentaires et assistance dépannage
• Base de connaissances : FAQ, procédure d’utilisation du produit
• Informations sur la garantie
• Et toutes vos questions relatives au stockage des données
Pour contacter le support technique, consultez la page Nous contacter.
REMARQUE : vériez auprès de votre fournisseur de service la compatibilité de votre enregistreur numérique ou de
votre récepteur avec le disque Seagate DVR Expander. Certains fournisseurs de service n'ont pas activé leurs
enregistreurs numériques ou leurs récepteurs pour qu'ils fonctionnent avec le disque Seagate DVR Expander. Votre
fournisseur de service peut vous facturer des frais supplémentaires pour activer ce dernier.
EN
BR
FR
COVER
COVER
2 3
1
Connect Seagate DVR Expander Drive to Your DVR
1. Turn your DVR off.
NOTE: Some DVRs require a full power cycle before recognizing an external
drive, therefore it is recommended to make sure your DVR is powered down
and unplugged before going to Step 2.
2. Connect the included eSATA or USB cable to the eSATA or USB connector on
the Seagate DVR Expander drive and to your DVR.
3. Connect the included power adapter to the Seagate DVR Expander drive and to
an electrical outlet. The Power LED on the Seagate DVR Expander drive
illuminates. Wait about 15 seconds for the Seagate DVR Expander drive to
power on completely.
4. Turn on your DVR and allow a minute or two for the DVR to recognize the
Seagate DVR Expander drive.
Format Seagate DVR Expander Drive
1. Make sure your TV is on.
2. If your DVR does not begin formatting the Seagate DVR Expander drive
automatically, follow the on-screen instructions to initiate the process.
Your DVR manufacturer or service provider may have additional installation
instructions.
Go to www.seagate.com/www/dvr-expander for additional information about
setting up the Seagate DVR Expander Drive with your DVR. Have the model of the
DVR handy.
NOTE: To ensure optimal performance and prevent operating errors, do not
move the Seagate DVR Expander drive while it is powered on and connected
to your DVR.
NOTE: The Seagate DVR Expander eSATA drive is not designed to be used with a
computer (laptop or desktop). The Seagate DVR Expander eSATA drive should
only be used with DVRs. Do not plug the Seagate DVR Expander drive into any
type of computer eSATA port.
Connectez le disque Seagate DVR Expander à votre enregistreur numérique
1. Éteignez votre enregistreur numérique.
REMARQUE : certains enregistreurs numériques doivent être entièrement
éteints puis rallumés pour reconnaître un disque externe. Par conséquent, nous
vous recommandons de veiller à éteindre et débrancher votre enregistreur
numérique avant de passer à l'étape 2.
2. Connectez le câble eSATA ou USB fourni au connecteur eSATA ou USB du
disque Seagate DVR Expander et de votre enregistreur numérique.
3. Connectez le transformateur fourni au disque Seagate DVR Expander et à une
prise électrique. Le voyant d'alimentation du disque Seagate DVR Expander
s'allume. Patientez environ 15 secondes pour que le disque soit totalement
allumé.
EN
FR
ES
BR
eSATA
TV Out
TV In
ES
HDMI Y
Pb
Optical
Pr
eSATA
TV Out
TV In
QUICK START GUIDE
GUIDE DE DÉMARRAGE RAPIDE
GUÍA DE INICIO RÁPIDO
GUIA DE INÍCIO RÁPIDO
EXTERNAL STORAGE FOR DVR
STOCKAGE EXTERNE POUR
ENREGISTREURS NUMÉRIQUES
© 2012 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, and the Wave logo are trademarks or
registered trademarks of Seagate Technology LLC, or one of its afliated companies in the United States and/or other countries.
All other trademarks or registered trademarks are the property of their respective owners.
Seagate reserves the right to change,
without notice, product offerings or specications. The export or re-export of hardware or software containing encryption may be
regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit www.bis.doc.gov)
and controlled for import and use outside of the U.S.
Seagate Technology LLC
10200 S. De Anza Blvd.
Cupertino, CA 95014
U.S.A.
PN: 100685546B 10/12
QUICK START GUIDE
4. Allumez votre enregistreur numérique et attendez une ou deux minutes pour lui
permettre de reconnaître le disque Seagate DVR Expander.
Formatez le disque Seagate DVR Expander
1. Assurez-vous que votre téléviseur est allumé.
2. Si le formatage du disque ne commence pas automatiquement, suivez les
instructions afchées à l'écran an de lancer le processus.
Selon le fabricant de votre enregistreur numérique ou votre fournisseur de service,
il peut y avoir des instructions d'installation supplémentaires.
Accédez au site www.seagate.com/www/dvr-expander pour plus
d'informations sur la conguration du disque Seagate DVR Expander an de
pouvoir l'utiliser avec votre enregistreur numérique. Vous aurez besoin de
connaître le modèle de l'enregistreur.
REMARQUE : pour garantir des performances optimales et éviter toute erreur de
fonctionnement, ne déplacez pas le disque Seagate DVR Expander lorsqu'il est
allumé et connecté à votre enregistreur numérique.
REMARQUE : le disque Seagate DVR Expander eSATA n'est pas conçu pour être
utilisé sur un ordinateur (portable ou de bureau). Il peut uniquement être utilisé
avec des enregistreurs numériques. Ne connectez le disque Seagate DVR
Expander à aucun type de port matériel eSATA.
Conecte la unidad Seagate DVR Expander al DVR
1. Apague el grabador de vídeo digital (DVR).
NOTA: algunos grabadores de vídeo digitales (DVR) deben completar un
ciclo de encendido antes de reconocer una unidad externa, por lo que le
recomendamos que se asegure de que su DVR se encuentra apagado y
desenchufado antes de proceder con el paso 2.
2. Conecte el cable eSATA o USB incluido al conector eSATA o USB de la unidad
Seagate DVR Expander y al DVR.
3. Enchufe el adaptador de corriente incluido a la unidad Seagate DVR Expander y
a una toma eléctrica. Se iluminará el LED de encendido de la unidad Seagate
DVR Expander. Espere unos 15 segundos a que la unidad Seagate DVR
Expander se encienda por completo.
4. Encienda el DVR y deje transcurrir un minuto o dos para que el DVR reconozca
la unidad Seagate DVR Expander.
Formatee la unidad Seagate DVR Expander
1. Asegúrese de que el televisor esté encendido.
2. Si el DVR no comienza a formatear la unidad Seagate DVR Expander
automáticamente, siga las instrucciones que aparecen en pantalla para iniciar
el proceso.
El fabricante del DVR o el proveedor de servicios pueden facilitarle instrucciones
de instalación adicionales.
Visite el sitio web www.seagate.com/www/dvr-expander para obtener más
información sobre la conguración de la unidad Seagate DVR Expander con el
DVR. Tenga a mano el modelo del DVR.
NOTA: Para garantizar un rendimiento óptimo y evitar errores de funcionamiento,
no mueva la unidad Seagate DVR Expander mientras esté encendida y conectada
al DVR.
NOTA: La unidad Seagate DVR Expander eSATA no está diseñada para ser
utilizada con un ordenador (portátil o de escritorio). La unidad Seagate DVR Expander
eSATA sólo debe utilizarse con DVR. No conecte la unidad Seagate DVR Expander a
ningún puerto eSATA de ordenador.
Conecte a unidade Seagate DVR Expander a seu DVR
1. Desligue o DVR.
NOTA: para reconhecer uma unidade externa, alguns DVRs exigem um
reinício completo, portanto, é recomendado vericar se o DVR está desligado
e desconectado antes de passar para a Etapa 2.
2. Conecte o cabo eSATA ou USB fornecido ao conector eSATA ou USB na
unidade Seagate DVR Expander e no DVR.
3. Conecte o adaptador de alimentação incluído à unidade Seagate DVR Expander
e a uma tomada. O LED de alimentação na unidade Seagate DVR Expander
acende. Aguarde cerca de 15 segundos para a unidade Seagate DVR Expander
ligar completamente.
4. Ligue o DVR e aguarde um ou dois minutos até o DVR reconhecer a unidade
Seagate DVR Expander.
Formate a unidade Seagate DVR Expander
1. Verique se a TV está ligada.
2. Se o DVR não começar a formatar a unidade Seagate DVR Expander
automaticamente, siga as instruções que aparecem na tela para iniciar o
processo.
O fabricante do DVR ou provedor de serviços poderá ter informações de instalação
adicionais.
Vá para www.seagate.com/www/dvr-expander para obter informações
adicionais sobre a conguração da unidade Seagate DVR Expander com o DVR.
Tenha o modelo do DVR à mão.
NOTA: para garantir o melhor desempenho possível e evitar erros de operação,
não mova a unidade Seagate DVR Expander enquanto ela estiver ligada e
conectada ao DVR.
NOTA: a unidade Seagate DVR Expander eSATA não foi projetada para ser usada
com computadores ou notebooks. Essa unidade deve ser usada somente com
DVRs. Não conecte a unidade Seagate DVR Expander a nenhum tipo de porta
eSATA de computador.
DVR Expander
100685546B
-
1
