Excel XR2600TY2 El manual del propietario
- Categoría
- Limpiadores de alta presión
- Tipo
- El manual del propietario
®
Pressure Washer
Record All Information and attach sales
receipt here for future reference:
Purchase Date:
Operation D'dilanuam
for model XR2600
Serial #:
Do Not return this product to the retailer!
Questions? 1-800-888-2468
Learn more about your pressure washer,
get answers to frequently asked questions,
and register on line at
www, excellpressurewasher, com
Table of Contents
Safety Guidelines/Definitions .............................2
Consumer Saftey Information ............................2
Important Safety Instructions .....................2-5
Carton Contents ...................................... 6
Assembly Instructions ..................................6
Operating Instructions ....................................7-11
Maintenance .................................................12
Storage ............................................................13
Trouble Shooting Guide ................... 14-I5
Warranty .............................................................................16
Espa_ol .......................................................................17-32
Frangais ...................................................33-48
IMPORTANT
Please make certain that the person who is to use this equipment carefully
reads and understands these instructions before operatin#
Part No. A12335 Rev. 0 05/18/05
Thismanualcontainsinformationthatisimportantforyoutoknowandunderstand,
ThisinformationrelatestoprotectingYOURSAFETYandPREVENTINGEQUIPMENT
PROBLEMS..Tohelpyourecognizethisinformation,weusethesymbolsbelow.Please
readthemanualandpayattentiontothesesymbols.
_ Indicatesanimminently
hazardoussituation
which,ifnotavoided,wi resultindeath
or serious injury.
_ ndicates a potentially
hazardous situation
which, if not avoided, could result in death
or serious injury.
Indicates a potentially
hazardous situation
which, if not avoided, may result in minor
or moderate injury.
_Used without the safety
alert symbol indicates a
potentially hazardous situation which, if not
avoided, may result in property€ damage.
_This product may not be equipped with a spark arresting muffler.
If the product is not equipped and will be used around flammable
materials, or on land covered with materials such as agricultural crops, forest, brush,
grass, or other similar items, then an approved spark arrester must be installed and
is legally required in the state of California. It is a violation of California statutes
section 130050 and/or sections 4442 and 4443 of the California Public Resources
Code, unless the engine is equipped with a spark arrester, as defined in section 4442,
and maintained in effective working order; Spark arresters are also required on some
U.S. Forest Service land and may also be legally required under other statutes and
ordinances.
__j_ Engine exhaust contains chemicals known, in certain quantities, to
cause cancer, birth defects or other reproductive harm
Do not operate this unit until you have read and understand this
Operators Manual and the Engine Owners Manual for Safety,
Operation, and Maintenance Instructions.
READ AND SAVE THESE INSTRUCTIONS
HAZARD _
_RISK OF EXPLOSION OR FIRE
WHAT CAN HAPPEN HOW TO PREVENT IT
o
Spilled gasoline and it's vapors can
become ignited from cigarette sparks,
electrical arcing, exhaust gases, and hot
engine components such as the muffler:.
Heat will expand fuel in the tank which
could result in spillage and possible fire
explosion°
Operating the pressure washer in an ex-
plosive environment could result in a fire..
o
Q
Shut off engine and allow it to cool before
adding fuel to the tank.
Use care in filling tank to avoid spilling fuel,
Move pressure washer away from fueling
area before starting engine..
Keep maximum fue! level 1/2"below top of
tank to allow for expansion,
Operate and fuel equipment in well venti-
lated areas free from obstructions. Equip
areas with fire extinguisher suitable for
gasoline fires.
A!2335 2- ENG
_RISK OF EXPLOSION OR FIRE (continued)
WHAT CAN HAPPEN HOW TO PREVENT IT
• + Never operate pressure washer in an area
containing dry brush or weeds,,
Materials placed against or near the
pressure washer can interfere with its proper
ventilation features causing overheating and
possible ignition of the materials.
Muffler exhaust heat can damage painted
surfaces, melt any material sensitive to
heat (such as siding, plastic, rubber, or
vinyl), and damage live plants..
Improperly stored fuel could lead to
accidental ignition., Fuel improperly
secured could get into the hands of
children or other unqualified persons°
Use of acids, toxic or corrosive chemicals,
poisons, insecticides, or any kind of
flammable solvent with this product could
result in serious injury or death.
Over inflation of tires could result in
serious injury and property damage.
Always keep pressure washer a minimum of
four feet away from surfaces (such as houses,
automobiles, or live plants) that could be
damaged from muffler exhaust heat..
Store fuel in an QSHA approved container,
in a secure location away from work area.
, Do not spray flammable liquids..
Use a tire pressure gauge to check the tires
pressure before each use and while inflating
tires; see the tire sidewall for the correct tire
pressure NOTE: Air tanks, compressors, and
similar equipment used to inflate tires can fill
small tires similar to these very rapidly. Add
air in small increments and frequently use the l
tire gauge to prevent over inflation.
HAZARD_RISK TO BREATHING
WHAT CAN HAPPEN HOW TO PREVENT IT
D O
Breathing exhaust fumes will cause
serious injury or death! Engine exhaust
contains carbon monoxide, an odorless
and deadly gas.
Some cleaning fluids contain substances
which could cause injury to skin, eyes, or
lungs..
o
o
Operate pressure washer in a well
ventilated area. Avoid enclosed areas such
as garages, basements, etc.
Never operate unit in a location occupied
by humans or animals.
Use only cleaning fluids specifically recom-
mended for high pressure washers. Follow
manufacturers recommendations. Do not
use chlorine bleach or any other corrosive
compound.
HAZARD
_RISK OF CHEMICAL BURN
WHAT CAN HAPPEN HOW TO PREVENT IT
o °
Use of acids, toxic or corrosive chemicals,
poisons, insecticides, or any kind of
flammable solvent with this product could
result in serious injury or death
Do not use acids, gasoline, kerosene,
or any other flammable materials in this
product. Use only household detergents,
cteaners and degreasers recommended
for use in pressure washers
Wear protective clothing to protect eyes
and skin from contact with sprayed
materials.
3- ENG A12335
HAZARD
RISK TO FLUID INJECTION
WHAT CAN HAPPEN
Your washer operates at fluid pressures
and velocities high enough to penetrate
human and animal flesh, which could
result in amputation or other serious injury,.
Leaks caused by loose fittings or-worn
or damaged hoses can result in injection
injuries. DO NOT TREAT FLUID INJECTION
AS A SIMPLE CUT! See a physician
immediately!
Injuries can result if system pressure is not
reduced before attempting maintenance or
disassembly
o
o
o
o
6
HOW TO PREVENT IT
Never place hands in front of nozzle..
Direct spray away from self and others_
Make sure hose and fittings are tightened
and in good condition. Never hold onto the
hose or fittings during operation..
Do not allow hose to contact muffler:
Never attach or' remove wand or hose
fittings while system is pressurized.
• To relieve system pressure, shut off
engine, turn off water supply, and pull gun
trigger until water stops flowing..
• Use only hoses and accessories rated
for pressure higher than your pressure
washer's PSI.
HAZARD
_RISK OF ELECTRICAL SHOCK
WHAT CAN HAPPEN HOW TO PREVENT IT
o Spray directed at electrical outlets or ° Unplug any electrically operated product
switches, or objects connected to an before attempting to clean it. Direct spray
electrical circuit, could result in a fatal away from electric outlets and switches.
electrical shock..
HAZARD
RiSK OF HOT SURFACES
WHAT CAN HAPPEN HOW TO PREVENT IT
Contact with hot surfaces, such as
engines exhaust components, could
result in serious burn.
During operation, touch only the control
surfaces of the pressure washer. Keep
children away from the pressure washer
at all times. They may not be able to
recognize the hazards of this product..
HAZARD
RISK OF INJURY OR PROPERTY DAMAGE
WHEN TRANSPORTING OR STORING
WHAT CAN HAPPEN
Fuel or oil can leak or spill and could
result in fire or breathing hazard, serious
injury or death can result. Fuel or oil
leaks will damage carpet, paint or other"
surfaces in vehicles or trailers.
HOW TO PREVENT IT
tf pressure washer is equipped with a
fuel shut-off valve, turn the valve to the
off position before transporting to avoid
fuel leaks If pressure washer is not
equipped with a fuel shut-off valve, drain
the fuel from tank before transporting,
Only transport fuel in an OSHA approved
container. Always place pressure washer
on a protective mat when transporting to
protect against damage to vehicle from
leaks,. Remove pressure washer from vehicle
immediately upon arrival at your destination.
A12335 4- ENG
HAZARD
_RiSK OF UNSAFE OPERATION
WHAT CAN HAPPEN HOW TO PREVENT IT
a
Unsafe operation of your pressure washer
could lead to serious injury or death to
you or others.
if proper starting procedure is not
followed, engine can kickback causing
serious hand and arm injury.
The spray gun/wand is a powerful clean-
ing tool that could look like a toy to a
child,.
Reactive force of spray will cause gun/
wand to kickback, and could cause the op-
erator to slip or fall, or misdirect the spray°
improper control of gun/wand can result in
injuries to self and others,
o Do not use chlorine bleach or any other
corrosive compound.
o Become familiar with the operation and
controls of the pressure washer.
° Keep operating area clear of all persons,
pets, and obstacles
. Do not operate the product when
fatigued or under the influence of alcohol
or drugs,. Stay aler_ at all times
° Never defeat the safety features of this
product,
Do not operate machine with missing,
broken, or unauthorized parts,.
° Never leave wand unattended while unit
is running.
o
If engine does not start after two pulls,
squeeze trigger of gun to relieve pump
pressure. Pull starter cord slowly until
resistance is felt. Then pull cord rapidly
to avoid kickback and prevent hand or
arm injury.
Keep children away from the pressure
washer at all times.
. Do not overreach or stand on an unstable
support.
Do not use pressure washer while
standing on a ladder.
• Grip gun/wand firmly with both hands,.
Expect the gun to kickback when
triggered,
HAZARD
_RISK OF INJURY FROM SPRAY
WHAT CAN HAPPEN HOW TO PREVENT IT
• e
High velocity fluid spray can cause
objects to break, propelling particles at
high speed.
Light or unsecured objects can become
hazardous projectifes_
Always wear ANSI approved Z87 safety
glasses .Wear protective clothing to protect
against accidental spraying.
• Never point wand at, or spray people or
animals..
• Always secure trigger lock when wand
is not in service to prevent accidental
operation.
° Never permanently secure trigger in pull
back (open) position.
5-ENG A12335
Engine Frame and
Wheei Assembly
High Pressure
Hose
Operation
Manual
Engine
Manual
©
Chemical Nozzle
Hose Cleaning
Tool
I Registration I
card
Nozzle
Holder
Quick
Connect
Nozzles
Bagged Pa_s
Spray Gun
Quick Connect Spray Wand
Handfe
Place handle assembly onto frame,
depress the snap buttons, and
slide the handle assembly onto the
frame until snap buttons snap into
place,
¸ !i
2.
Attach high
pressure hose
to gun. Tighten
securely,
3. Connect wand to
gun. Tighten securely,,
4_ Place the nozzle holder onto
the panel (located on the handle
assembly) and push each nozzle
holder into place.
5_
Remove five colored quick
connect nozzles from plastic
bag and insert them into correct
grommet on the nozzle holder:
NOTE: Nozzles are color coded
to match colored nozzles on
panel.
NOTE: The pump on this unit is
maintenance free and requires no oil,
if there is a problem with the pump
contact an Authorized Service Center.
6. Use a tire pressure gauge to
check the tires pressure before
each use and while inflating
tires; see the tire sidewall for the
correct tire pressure. NOTE: Air
tanks, compressors, and similar
equipment used to inflate tires
can fill small tires similar to these
very rapidly. Add air-in small
increments and frequently use
the tire gauge to prevent over
inflation.
Risk of Bursting.
Over inflation of
tires could result in serious injury
and property damage,
A12335 6 - ENG
Compare the illustrations with your unit to familiarize yourself with the location
of various controls and adjustments. Save this manual for future reference.
Quick
Connect
Spray Wand
Spray
Gun
High
Pressure
Engine
High Pressure
Pump (located
inside the
shroud)
BASIC ELEMENTS OF A
PRESSURE WASHER
High Pressure Pump (located inside
the shroud): Increases the pressure
of the water supply.
Engine: Drives the high pressure
pump.
High Pressure Hose: Carries the
pressurized water from the pump to
the gun and spray wand°
Spray Gun: Connects with spray
wand to control water flow rate,
direction, and pressure.
Quick Connect Spray Wand: Allows
the user to quickly change out high-
pressure nozzles. See How To Use
Spray Wand instructions in this section_
Chemical Hose (not shown): Feeds
cleaning agents into the pump to
mix with the water, See How To
Apply Chemicals/Cleaning Solvents
instructions in this section,
BASRC ELEMENTS OF AN
ENGINE
Refer to the engine manual for
location and operation of engine
controls.
Choke Control: Opens and closes
carburetor choke valve_
Starter Grip: Pulling starter grip
operates recoil starter to crank
engine.
Engine Switch: Enables and disables
ignition system,
PRESSURE WASHER
TERMINOLOGY
PSI: Pounds per Square Inch_ The
unit of measure for water pressure,
Also used for air pressure, hydraulic
pressure, etc,
GPM: Gallons Per Minute, The unit of
measure for the flow rate of water,
CU: Cleaning Units, GPM multiplied
by PSI_ GPM x PSI = CU
7_ ENG A12335
Bypass Mode: Allows water to
re-circulate within pump when the gun
trigger is not pulled.
Allowing the unit to
run for more than
two minutes without the gun trigger
pulled could cause overheating and
damage to the pump.
Chemical Injection System: Mixes
cleaners or cleaning solvents with
the water to improve cleaning
effectiveness_
Water Supply: All pressure washers
must have a source of water: The
minimum requirements for a water
supply are 20 PSI and 5 gallons per
minute,
PRESSURE WASHER
OPERAT|NG FEATURES
PRESSURE ADJUSTMENTS
The pressure setting is preset at the
factory to achieve optimum pressure
and cleaning. If you need to lower the
pressure, it can be accomplished by
these methods_
1. Back away from the surface
to be cleaned. The further away
you are, the less the pressure will
be on the surface to be cleaned.
2. Change to the 40 ° nozzle -
(white) this nozzle delivers a less
powerful stream of water and a
wider spray pattern.
DO NOT attempt
to increase pump
pressure. A higher pressure setting
than the factory set pressure may
damage pump,
READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT
When using the high pressure setting, DO NOT allow the high
pressure spray to come in contact with unprotected skin, eyes,
or' with any pets or animals. Serious injury can occur:
Your washer' operates at fluid pressures and velocities high enough to penetrate
human and animal flesh, which could result in amputation or other serious injury.
Leaks caused by loose fittings or worn or damaged hoses can result in injection
injuries.. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician
immediately!
NEVER fill fuel tank when engine is running or hot. Do not
smoke when filling fuel tank°
NEVER fill fuel tank completely., Fill tank to 1/2" below bottom of filler neck
to provide space for fuel expansion. Wipe any fuel spillage from engine and
equipment before starting engine.
NEVER run engine indoors or in enclosed, poorly ventilated areas° Engine exhaust
contains carbon monoxide, an odorless and deadly gas.
DO NOT let hoses come in contact with very hot engine rnuffler during or
immediately after use of your pressure washer. Damage to hoses from contact with
hot engine surfaces will NOT be covered by warranty,
NEVER pull water supply hose to move pressure washer: This
could damage hose and/or pump inlet.
DO NOT use hot water; use cold water only,
NEVER turn water supply off while pressure washer engine is running or damage to
pump will result.
DO NOT stop spraying water for more than two minutes at a time° Pump operates
in bypass mode when spray gun trigger is not pressed, if pump is left in bypass
mode for more than two minutes internal components of the pump can be
damaged.
If you do not understand these precautions, please call 1-800-888-2468 to
speak to a service representative for further instructions.
A12335 8- ENG
TO USE SPRAY WAND
The nozzles for the spray wand are
stored in nozzle holder on the panel
assembly, Colors on the panel identify
nozzle location and spray pattern° See
chart to choose the correct nozzle for
the job to be performed°
CHANGING NOZZLES ON SPRAY
WAND
Risk of Flying
Object could
cause risk of serious injury. DO
NOT attempt to change nozzles
while pressure washer is running.
Turn engine off before changing
nozzles.
1. Pull quick connect coupler back
and insert nozzle.
2. Release quick connect coupler
and twist nozzle to make sure it
is secure in coupler.
Risk of Flying
Object could cause
risk of serious injury. Ensure nozzle
is completely inserted in QC socket,
and QC snap ring is fully engaged
(forward) before squeezing gun
trigger.
Risk of injection or
injury to person.
Do not direct discharge stream
toward persons, unprotected
skin, eyes, or any pets or animals.
Serious injury can occur.
Nozzle Color Red
0o
_owerful
Uses pinpoint for
very intense
cleaning
Yellow Green White Black
...... i
15° 25° 40° low pressure
intense intense covers wide applies
cleaning of cleaning of areas of cleaning
small areas larger areas icteaning solutions
Metal or metal, Ilmetal' metal, metal,
concrete concrete, or lconcrete, or concrete, concrete,
wood, or
DO NOT use wood Jwood iwood, or vinyl v[ioy!
on wood ......
* The high pressure spray from your pressure washer is
capable of causing damage to surfaces such as wood,
glass, automobile paint, auto striping and trim, and delicate objects such as
flowers and shrubs. Before spraying, check the item to be cleaned to assure
yourself that it is strong enough to resist damage from the force of the spray.
9_ ENG A12335
HOW TO APPLY CHEMICALS
AND CLEANING SOLVENTS
Applying chemicals or cleaning
solvents is a low pressure operation.
NOTE: Use only soaps and chemicals
designed for pressure washer use_ Do
not use bleach.
To Apply chemicals:
1. Press chemical
hose onto
barbed fitting
located near high
pressure hose
connection of
pump as shown
2. Place other end of chemical
hose with filter on it into container
holding chemical/cleaning
solution° NOTE: For every 7
gallons of water pumped 1 gallon
of chemical/cleaning solution will
be used,
3. Install low pressure (black}
nozzle into quick connect fitting
of spray wand, see How To Use
Spray Wand paragraph in this
section.
4. After use of chemicals, place
chemical hose into container
of clean water and draw
clean water through chemical
injection system to rinse
system thoroughly, If chemicals
remain in the pump it could be
damaged. Pumps damaged due
to chemicals will not be covered
under warranty.
NOTE: Chemicals and soaps will not
siphon when spray wand is in the high
pressure setting,,
STARTING
Prior to starting, refer to your engine
manual for proper starting procedure.
1. In a well ventilated outdoor
area add fresh, high quality,
unleaded gasoline with a pump
octane rating of 86 or higher. Do
not overfill. Wipe up spilled fuel
before starting the engine,. Refer
to Engine Owners Manual for
correct procedure.
2. Check engine oil level. See
Engine Owners Manual for correct
procedure.
3. Verify the filter
screen is in
water inlet of
pump_ NOTE:
Cone side
faces out,,
4. Connect water
source to pump inlet. NOTE:
Water source must provide a
minimum of 5 gallons per- minute at
2O PSI.
5. Connect high pressure hose to
pump outleL
Water
Source
6. if applying a chemical or
cleaning solution, see How
To Apply Chemicals/Cleaning
Solvents instructions in this
section°
7. Turn water source on.
NOTE: Failure to do so could
cause damage to the pump.
At2335 10-ENG
8. Start engine. See Engine
Owners Manual for correct
procedure. NOTE: When engine
rope is pulled, pressure starts
building in the gun. If the engine
does not start after two pulls,
pull the gun trigger to relieve this
pressure°
9. Depress trigger on gun to
start water flow. NOTE: Stand
on a stable surface and grip
gun/spray wand firmly with both
hands. Expect the gun to kick
when triggered,
10. Release trigger to stop water
flow.
11. Adjust nozzle spray for the
task being performed. See How
To Use Wand instructions in this
section.
SHUTTING DOWN
1. After each use, if you have
applied chemicals, place chemical
hose into container of clean water
and draw clean water through
chemical injection system to rinse
system thoroughly, NOTE: Failure
to do so could cause damage to
the pump.
2. Turn engine off. See Engine
Owner's Manual. NOTE: NEVER
turn the water off with the engine
running,
3, Turn water source off.
4, Pull trigger on spray gun to
relieve any water pressure in hose
or spray gun°
5, See Storage section in this
manual for proper storage
procedures,
11- ENG A12335
When perlorming
maintenance_ you
may be exposed to hot surfaces,
water pressure, or moving parts that
can cause serious injury or death!
Before performing any maintenance
or repair, disconnect spark plug
wire, let engine cool and release
all water pressure. The engine
contains flammable fuel. DO NOT
smoke or work near open flames
while performing maintenance.
To ensure efficient operation and
longer life of your pressure washer; a
routine maintenance schedule should
be prepared and followed., If the
pressure washer is used in unusual
conditions, such as high-temperatures
or dusty conditions, more frequent
maintenance checks will be required.
ENGINE
Consult the Engine Owners
Manual for the manufacturer's
recommendations for any and all
maintenance. Consult the Engine
Owners Manual for the manufactur _
er's recommendations for any and
all maintenance_ NOTE: The frame is
equipped with an oil drain hole to help
make changing the engine oiI easier.
PUMP
The pump on this unit is maintenance
free and requires no oil, if there is a
problem with the pump contact an
Authorized Service Center.
NOZZLE CLEANING
If the nozzle becomes clogged
with foreign materials, such as dirt,
excessive pressure may develop. If
the nozzle becomes partially clogged
or restricted, the pump pressure will
pulsate. Clean the nozzle immediately
using the nozzle kit supplied and the
following instructions:
1. Shut off the pressure washer and
turn off the water supply.
2= Pull trigger on gun handle to
relieve any water pressure.
1
4.
Disconnect the spray wand from
the gun.
Remove the high-pressure nozzle
from the spray wand. Remove
any obstructions with the nozzle
cleaning toot provided and
backflush with clean water:
5. Direct water supply into spray
wand to backflush loosened
particles for 30 seconds_
6. Reassemble the nozzle to the
wand,
7. Reconnect spray wand to gun
and turn on water supply_
8. Start pressure washer' and place
spray wand into high pressure
setting to test°
HOW TO CLEAN THE WATER
iNLET FALTER
This screen filter should be checked
periodically and cleaned if necessary.
1. Remove filter
by grasping end
and removing
it from water
inlet of pump as
shown,
2. Clean filter by flushing it with
water on both sides.
3. Re-insert filter into water inlet of
pump, NOTE: Cone side faces out_
NOTE: Do not operate pressure
washer without filter properly installed_
At2335 12- ENG
ENGINE
Consult the Engine Owners Manual for
the manufacturer's recommendations
for storage.
PUMP
The manufacturer recommends using
a pump protector/winterizer, such as
EXA80, when storing the unit for more
than 30 days and/or when freezing
temperatures are expected, If a pump
protector/winterizer is not available,
*RV antifreeze needs to be run through
the pump as outlined in the steps
below.
NOTE: Using a pump protector/winterizer
or *RV antifreeze is to provide proper
lubrication to the internal seals of the
pump regardless of temperature or
environment,
1. Obtain a funnel, six ounces of*RV
antifreeze, and t6 - 36 inches of
garden hose with a male hose
connector attached to one end.
Use only RV
antifreeze. Any
other antifreeze is corrosive and
can damage pump,
2. Disconnect spark plug wire,
3. Connect length of garden hose to
water inlet of pump.
4. Add *RV antifreeze to hose as
shown._
5. Pull engine starter rope slowly
several times until antifreeze
comes out of high pressure hose
connection of pump.
6. Remove garden hose from water
inlet of pump,,
7. Reconnect spark plug wire.
*Windshield washer fluid may also be
used
PRESSURE WASHER
1. Drain all water from high pressure
hose, coil it, and store it in cradle
of the pressure washer handle.
2. Drain all water from spray gun
and wand by holding spray gun in
a vertical position with nozzle end
pointing down and squeezing
trigger. Store in gun holder,,
3. Store chemical hose so it is
protected from damage.
4. if space is needed, remove
handles and replace as shown,.
13- ENG A12335
PROBLEM
Engine will
not start (see
Engine Manual
for further
engine
troubleshooting)
No or low
pressure
(initial use)
No fuel
CAUSE
Pressure builds up after two pulis
on the recoil starter or after initial
use_
Choke lever in the "No Choke"
3osition
Spark plug wire not attached.
Engine ON!OFF switch in OFF
)osition,.
Choke lever in the "Choke"
3osition on a "hot" engine or an
engine that has been exposed to
thermal heat for a long period of
time,
Spray wand not in high pressure,,
Low water supply.
Leak at high pressure hose fitting°
Nozzle obstructed,
Water filter screen clogged,.
Air in hose,
Choke lever in the "Choke" position.
High pressure hose is too longo
CORRECTION
Add Fuel.
Squeeze gun trigger to relieve
pressure,,
Move choke to the "Choke"
position.
Attach spark plug wire,.
Place engine ON/OFF switch in
ON position,
Move choke to the "No Choke"
position_
See How to Use Spray Wand
instructions in the Operation
Section.
Water supply must be at least 5
GPM @20 PSI,
Repair leak. Apply sealant tape
if necessary,
See Nozzle Cleaning instructions
in the Maintenance section.
Remove and clean filter,.
Turn off the engine, then the
water source.. Disconnect the
water source from the pump inlet
and turn the water source on
to remove all air from the hose..
When there is a steady stream
of water present, turn water
source off. Re-connect water
source to pump inlet and turn on
water source. Squeeze trigger to
remove remaining air'
Move choke to the "No Choke"
position,
Use high pressure hose under
1O0feet,
A!2335 14- ENG
PROBLEM
Will not draw
chemicals
No or low
pressure
(after period
of normal
use)
Water leaking
at gun/
spray wand
connection
Water
leaking at
pump
Pump
Pulsates
CAUSE
Spray wand not in low pressure°
Chemical filter clogged,,
Chemical screen not in cleaning
solution.
Chemical too thick.
Pressure hose is too long
Chemical build up in chemical
injector.
Worn sea! or packing
Worn or obstructed valves.
Worn unloader piston,
Worn or broken o-ring.
Loose hose connection.
Loose connections.
Piston packings worn.
Worn or broken o-rings,
Pump head or tubes damaged
from freezing.
Nozzle obstructed.,
CORRECTION
See How to Use Spray Wand
paragraph in the Operation
Section..
Clean filter.
Make sure end of chemical hose
is fully submerged into cleaning
solution,
Dilute chemical Chemical should
be the same consistency as water.
Lengthen water supply hose
instead of high pressure hose.
Have parts cleaned or replaced
by AWSC.
Have replaced by AWSC
Have replaced by AWSC,
Have replaced by AWSC.
Check and replace.
Tighten.
Tighten.
Have replaced by AWSC.
Have replaced by AWSC,
Have replaced by AWSC,
See Nozzle Cleaning paragraph in
the Maintenance section for the
correct procedure_
t5- ENG At2335
DeVilbiss Air Power Company warrants to the original purchaser who uses the product in a
consumer" application (personal, residential or household usage) that all products covered under this
warranty are free from defects in material and workmanship for one year from the date of purchase
All products covered by this limited warranty which are used in commercial applications (i..e.,income
producing) are warranted to be free of defects in material and workmanship for 90 days from the date
of original purchase_ Products covered under this warranty include air compressors, air tools, service
parts, pressure washers, and generators.
DeVilbiss Air Power' Company wilt repair or replace, at DeVifbiss' option, products or components
which have failed within the warranty period.. Service will be scheduled according to the normal work
flow and business hours at the service center location, and the availability of replacement parts. All
decisions of DeVitbiss Air Power Company with regard to this limited warranty shall be final,
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state
RESPONSIBILITY OF ORIGINAL PURCHASER (initial User):
= To process a warranty claim on this product, DO NOT return it to the retailer The product must be
evaluated by an Authorized Warranty Service Center For the location of the nearest Authorized
Warranty Service Center call t-800-888-2468, 24 hours a day, 7 days aweek or visit our web site
@ devap..com.
o Retain original cash register sales receipt as proof of purchase for warranty work.
o Use reasonable care in the operation and maintenance of the product as described in the Owners
Manual(s).
o Deliver or ship the product to the nearest Authorized Warranty Service Center Freight costs, if any,
must be paid by the purchaser;.
o Air compressors with 60 and 80 gallon tanks will be inspected at the site of installation. Contact
the nearest Authorized Warranty Service Center' that provides on-site service calls for' service call
arrangements.
= If the purchaser does not receive satisfactory results from the Authorized Warranty Service Center,
the purchaser should contact DeVilbiss Air Power' Company,
THIS WARRANTY DOES NOT COVER:
° Merchandise sold as reconditioned, used as rental equipment, or floor or display models
o Merchandise that has become damaged or inoperative because of ordinary wear; misuse*, cold,
heat, rain, excessive humidity, freeze damage, use of improper chemicaEs, negligence, accident,
failure to operate the product in accordance with the instructions provided in the Owner's Manual(s)
supplied with the product, improper maintenance, the use of accessories or attachments not
recommended by DeVilbiss Air' Power Company, or unauthorized repair or' alterations,.
" An air compressor that pumps air more than the recommended duty cycle during a one hour
period may be considered misuse.
° Repair and transportation costs of merchandise determined not to be defective.
- Costs associated with assembly, required oil, adiustments or other installation and start-up costs.
o Expendable parts or accessories supplied with the product which are expected to become
inoperative or unuseable after a reasonable period of use, including but not limited to sanding disks
or pads, saw and shear blades, grinding stones, springs, chisels, nozzles, o-rings, air'jets, washers
and similar' accessories.
= Merchandise sotd by DeVitbiss Air Power Company which has been manufactured by and identified
as the product of another company, such as gasoline engines. The product manufacturer's
warranty, if any, will apply
= ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT
MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF THE PRODUCT IS
NOT COVERED BY THIS WARRANTY, Some states do not allow the exclusion or ]imitation of
incidental or consequential damages, so the above limitation or exclusion may not apply to you
, IMPLIED WARRANTIES, IrqCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR FROM THE DATE OF ORIGINAL
PURCHASE. Some states do not allow limitations on how long an implied warranty lasts, so the
above limitations may not apply to you
BeVILBI$$ A#R PO#tfER COMPANY
_------"_2I 3 Industrial DAve, Jackson, TN 38301-96t5
Telephone: 1-860-888-2468
FAX: 1_800-888-9036
A12335 16- ENG
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Excel XR2600TY2 El manual del propietario
- Categoría
- Limpiadores de alta presión
- Tipo
- El manual del propietario
En otros idiomas
- English: Excel XR2600TY2 Owner's manual
Otros documentos
-
DeWalt DXPW4035 Guía del usuario
-
Porter-Cable A17914-05-10-06 Manual de usuario
-
-
Delta D3500K Manual de usuario
-
-
-
-
HS Hirschler PCE1700 Manual de usuario
-
Craftsman D28234 Manual de usuario
-
