Volvo 2019 Early Manual de usuario
- Categoría
- Navegantes
- Tipo
- Manual de usuario
Este manual también es adecuado para
SENSUS NAVIGATION
Types of roads Color
Freeways
Orange
Main roads
Dark gray
Secondary main roads
Gray
Normal roads Light gray
Local roads White
Text and symbols on the screen
Action to take at the next guidance point
Distance to the next guidance point
Name of the next street or road
Facility/point of interest (POI)
Intermediate destination in an itinerary
Symbol for destination/final destination
Calculated remaining time to destination
Calculated remaining distance to destination
The vehicle’s current location
Map scale
Stored location
Route
Final destination
Name of the current road/street at the vehicle's current location (9)
Compass
Section of the route affected by traffic information
Traffic information
SENSUS NAVIGATION
Sensus Navigation is a satellite-based guidance and traffic information
system.
The system includes features that enable you to set itineraries, search
for certain types of points of interest along your route, store special des-
tinations, obtain traffic information en route, etc.
The system indicates the vehicle’s current location, and shows part or all
of the route to your destination, depending on the settings you have
made. If at any time you should decide to deviate from the route origi-
nally set by the system, a new route to the destination will automatically
be calculated.
By enabling you to reach your destination quickly and by the most direct
route, Volvo's navigation system also helps contribute to improving the
environment.
NOTE
•
Do not export your Volvo to another country before investi-
gating that country's applicable safety and exhaust emission
requirements. In some cases it may be difficult or impossible
to comply with these requirements. Modifications to the
emission control system(s) may render your Volvo not certifi-
able for legal operation in the U.S., Canada and other coun-
tries.
•
All information, illustrations and specifications contained in
this manual are based on the latest product information
available at the time of publication. Please note that some
vehicles may be equipped differently, depending on market-
specific adaptations or special legal requirements. Optional
equipment described in this manual may not be available in
all markets.
•
Some of the illustrations shown are generic and are
intended as examples only, and may not depict the exact
model for which this owner's information is intended.
•
Volvo reserves the right to make model and product
changes at any time, or to change specifications or design
without notice and without incurring obligation.
2
INTRODUCTION
Introduction
6
Sensus Navigation
7
Sensus navigation
11
Navigation – text wheel and keypad
13
Navigation – voice control
14
SETTING A DESTINATION,
ITINERARY AND ROUTE
Navigation: setting a destination
18
Navigation – points of interest (POI)
symbols
22
Navigation – itineraries
23
Navigation – routes
24
Navigation – route options
27
Navigation – map options
29
Navigation – guidance alternatives
31
Navigation – importing/exporting
stored locations
34
TRAFFIC INFORMATION
Navigation – traffic information
36
Navigation–Real Time Traffic
Information (RTTI)
39
TABLE OF CONTENTS
INTRODUCTION
INTRODUCTION
6
Introduction
This supplement complements your vehicle's
owner's information.
If you are uncertain as to any of your vehicle's
features or functions, consult your printed own-
er'smanual or the on-board owner's information.
If you have any further questions, please contact
a Volvo retailer or other representative of the
Volvo Car Corporation.
All information, illustrations and specifications
contained in this owner's information are based
on the latest product information available at the
time of publication. Volvo reserves the right to
make model changes at any time, or to change
specifications or design without notice and with-
out incurring obligation.
© Volvo Car Corporation
Options and accessories
Optional or accessory equipment described in
this manual is indicated by an asterisk.
Optional or accessory equipment may not be
available in all countries or markets. Please note
that some vehicles may be equipped differently,
depending on special legal requirements.
Contact your Volvo retailer for additional informa-
tion.
NOTE
•
Do not export your Volvo to another
country before investigating that coun-
try's applicable safety and exhaust emis-
sion requirements. In some cases it may
be difficult or impossible to comply with
these requirements. Modifications to the
emission control system(s) may render
your Volvo not certifiable for legal opera-
tion in the U.S., Canada and other coun-
tries.
•
All information, illustrations and specifica-
tions contained in this manual are based
on the latest product information availa-
ble at the time of publication. Please note
that some vehicles may be equipped dif-
ferently, depending on special legal
requirements. Optional equipment descri-
bed in this manual may not be available in
all markets.
•
Some of the illustrations shown are
generic and may not depict the exact
model for which this manual is intended.
•
Volvo reserves the right to make model
changes at any time, or to change speci-
fications or design without notice and
without incurring obligation.
The owner's manual in mobile devices
NOTE
The owner's manual mobile app can be down-
loaded at www.volvocars.com.
The mobile app also contains videos and
searchable content, and provides easy naviga-
tion between the various articles.
INTRODUCTION
}}
7
Sensus Navigation
This section provides a description and overview
of the Sensus Navigation system.
The system calculates routes, travel time and dis-
tance to the selected destination and provides
instructions to help guide you there.
If you do not follow the planned route during your
trip, the system will automatically calculate a new
one. The system can also be used even if a desti-
nation has not been selected.
The system is delivered with default settings but
will start with the most recently used ones.
Volvo Sensus Navigation uses the WGS84 refer-
ence system, which provides your location includ-
ing longitude and latitude.
Keep in mind
This system provides road and map information
that helps you to reach your destination. Road
conditions may make certain recommendations
less reliable. Always adhere to road and traffic
regulations and use good judgement while driv-
ing. Always focus all of your attention on the road
and your concentration primarily on driving.
WARNING
•
Always use good judgment when follow-
ing navigation system guidance, and do
not follow guidance that seems contrary
to your own best judgment.
•
Never use the navigation system or any
other feature in your vehicle in a way that
distracts you from the task of driving
safely. Distraction can lead to a serious
accident.
•
Set and make changes in your navigation
system only with the vehicle parked.
•
Be aware of the current traffic situation.
•
Always comply with relevant traffic regu-
lations.
•
Due to weather conditions or time of year
affecting the road conditions, some rec-
ommendations may be less reliable.
System overview
Steering wheel keypad for navigating in
menus and adjusting volume and voice guid-
ance.
The screen displays maps and provides
detailed information about routes, distances,
etc.
The keys in the center console can be used
to navigate in menus, confirm selections,
adjust volume, etc.
USB connection.
Microphone for giving voice commands.
INTRODUCTION
}}
9
Map overview
Generic examples of map views
The type of information shown on the screen is
determined by geographic location, the system
settings that have been applied, the points of
interest chosen for display, etc.
||
INTRODUCTION
10
For an explanation of text, signs and symbols
used, see the inside of this manual's front cover.
When a route is calculated, three alternatives
are presented, see (p. 27).
Detailed intersection information: the left
side of the screen shows an enlarged view of
the next intersection/turn. Voice instructions
are also provided, see (p. 27).
An area selected to be avoided, see (p. 27).
Scroll mode, seek (p. 11).
Related information
•
Sensus navigation (p. 11)
•
Navigation – voice control (p. 14)
INTRODUCTION
}}
11
Sensus navigation
This article provides basic information and exam-
ples about operating the Sensus Navigation sys-
tem.
The navigation system can be operated from the
center console, the steering wheel keypad and in
certain cases by using voice control.
Activating Sensus Navigation
–
Press the NAV button on the center console.
> After a short wait, a map of the current
area will appear on the screen. The loca-
tion of your vehicle will be indicated by a
blue triangle.
WARNING
•
Always use good judgment when follow-
ing navigation system guidance, and do
not follow guidance that seems contrary
to your own best judgment.
•
Never use the navigation system or any
other feature in your vehicle in a way that
distracts you from the task of driving
safely. Distraction can lead to a serious
accident.
•
Set and make changes in your navigation
system only with the vehicle parked.
•
Be aware of the current traffic situation.
•
Always comply with relevant traffic regu-
lations.
•
Due to weather conditions or time of year
affecting the road conditions, some rec-
ommendations may be less reliable.
The navigation system cannot be turned off and
remains active in the background. However, it
switches off automatically when the ignition is
switched off.
NOTE
The system can be used even when the
engine is not running but will be switched off
automatically if the battery's charge level is
low.
Menus
The navigation system's menus consist of short-
cuts, main menus and scroll menus. See the info-
tainment information in the vehicle's owner's
manual for additional information.
In Scroll mode, the cursor is moved across the
map using number keys on the center console.
Scroll mode and cursor
1
.
Activating/deactivating Scroll mode
–
Activate: press one of the center console's
number keys 0–9.
–
Deactivate: press EXIT or NAV.
1
The cursor can be set to show a name or GPS coordinates, see (p. 29).
||
INTRODUCTION
12
Scrolling
–
Press one of the center console's number
keys 1-2-3-4-6-7-8-9: an arrow showing
the direction will appear in the margin com-
bined with the number to be used to scroll in
the desired direction.
Zooming
–
Turn TUNE on the center console.
Centering the map
Pressing key 5 in Scroll mode will cen-
ter the map around the vehicle's cur-
rent location.
If an itinerary with intermediate destinations is
activated, the map will be centered on one of the
intermediate destinations each time the key is
pressed.
Scroll menu
1.
While in Scroll mode, press the thumb
wheel/OK/MENU.
> A menu will open for the point on the map
that the cursor is pointing to.
2. Select a function:
•
Set single destination: any previous
destinations in the itinerary will be erased
and guidance will start on the map.
•
Add as waypoint: the marked location
will be added to the itinerary.
•
POI information: the name and address
of a point of interest closest to the cursor
will be displayed. For additional informa-
tion, see (p. 18).
•
Traffic information on map: makes it
possible to see any available traffic infor-
mation for the marked location
2
.
•
Information: displays any available infor-
mation about the marked location.
•
Save: stores the marked location in the
system's memory.
Example
Guidance to a point of interest (POI)
1. If the map is not displayed on the center
console screen, press NAV.
> The map will be displayed.
2.
Press NAV.
> The Shortcut menu will open.
3.
Mark
Set point of interest and confirm by
pressing the thumb wheel/OK/MENU.
4.
Mark e.g.,
Near the car and confirm by
pressing the thumb wheel/OK/MENU.
> A list of search results will be displayed.
5.
Mark e.g.,
Nearest tourist attraction and
confirm by pressing the thumb wheel/OK/
MENU.
> A list of search results will be displayed.
6. Mark your choice in the list and confirm by
pressing the thumb wheel/OK/MENU.
> A pop-up menu will be displayed.
7.
Mark
Set single destination and confirm
by pressing the thumb wheel/OK/MENU.
> Guidance will begin and instructions/
directions will be provided.
See also the example in the Voice con-
trol(p. 14) article.
2
Not available in all areas.
INTRODUCTION
}}
13
Navigation – text wheel and keypad
Use the text wheel or the center console keypad
to enter text or to display information about e.g.,
an address or point of interest.
Generic screen view showing the free-text field at the
top
Activating a choice
When the desired function/menu selection has
been chosen by turning the thumb wheel on the
steering wheel keypad or TUNE on the center
console, press the thumb wheel/OK/MENU to
display the function/menu's next level.
Using the text wheel
Text wheel (generic view)
1. Mark a text field.
2.
Press thumb wheel/OK/MENU to display
the text wheel.
3.
Select a character with the thumb wheel/
TUNE and enter it by pressing the thumb
wheel/OK/MENU.
Entering text using the center console
keypad
Keypad (generic illustration)
The center console number keys 0–9, * and #
can also be used to enter characters.
For example, press 9
3
to display all of
the characters that can be entered by
pressing this key, which can be for
example:
w, x, y, z and 9. Press the button briefly
to move the cursor to each available character.
•
Stop on the desired character to select it and
it will appear in the text field.
•
Delete or cancel with EXIT.
Other characters
The inset menu in the text wheel shows other
special characters or numbers. Note that grayed-
3
The characters for each respective key may vary, depending on the language selected and the market
||
INTRODUCTION
14
out characters cannot be selected in the current
context:
•
123/ABC + thumb wheel/OK/MENU: tog-
gle between numbers and letters/other char-
acters.
•
MORE + thumb wheel/OK/MENU: press
to display special characters on the text
wheel.
•
=> + thumb wheel/OK/MENU: the cursor
moves to the list at the right of the screen.
Selections can be made here by pressing
OK/MENU.
•
Zip code + thumb wheel/OK/MENU: the
cursor moves to the list at the right of the
screen. Selections can be made here by
pressing OK/MENU, see Setting a destina-
tion (p. 18).
List of alternatives
A list matching the characters entered (generic illustra-
tion)
When searches are performed, alternatives
matching the characters entered will be dis-
played.
The number "149"in the upper right corner of
the screen indicates that the there are 149 alter-
natives containing the characters entered "LON".
No list
An empty list and the characters *** in the upper
right corner indicates that there are over 1,000
alternatives containing the characters entered. If
there are fewer alternatives, they will automati-
cally be displayed.
To reduce the number of alternatives on the list,
enter additional characters.
Related information
•
Sensus navigation (p. 11)
Navigation – voice control
This article provides examples of voice com-
mands that can be used with the navigation sys-
tem.
See your owner's manual for more detailed infor-
mation about voice control.
The following dialogs are examples and the sys-
tem's responses may vary depending on the sit-
uation.
Starting guidance
The following voice control dialog starts guidance
according to the currently set itinerary.
–
Say "Start route guidance."
>
The system will respond with: "
Start
guidance."
Canceling guidance
The following voice control dialog cancels guid-
ance.
1.
Say "
Cancel route guidance".
>
The system will respond with: "
Do you
want to cancel guidance and clear
itinerary?."
2.
Say "
Yes."
>
The system will respond with: "
Cancel
guidance."
INTRODUCTION
15
Using a point of interest (POI) as a
destination
The following voice control dialog starts guidance
to the nearest gas station but can also be used
for points of interest such as hotels or restau-
rants.
1.
Say "
Nearest gas station."
> The system will respond by asking you to
say a line number.
2. Say a line number of the desired gas station
(e.g., line 5) "
5".
> The system will respond by confirming line
5 and asking if you want to use this as a
waypoint or a final destination.
3.
Say "
Yes".
> The system will respond by asking if you
would like to start guidance.
4.
Say "
Yes."
> A route will be calculated and guidance
will begin.
Additional commands
Additional navigation system voice commands
can be found in the normal view for MY CAR by
pressing OK/MENU and selecting
Settings
Voice control settings Command list
Navigation commands.
Related information
•
Sensus navigation (p. 11)
SETTING A DESTINATION, ITINERARY AND
ROUTE
SETTING A DESTINATION, ITINERARY AND ROUTE
18
Navigation: setting a destination
This article explains how to set a destination in
the navigation system.
Each time a destination is set, it can be saved as
a
Stored location or Home. The navigation sys-
tem provides guidance to the destination and up
to four intermediate destinations can be added to
an itinerary. In many cases, the system can also
provide additional
Information about destina-
tions.
If the vehicle is connected to the Internet, map
destinations can be sent to the navigation system
from a web browser using the "Send to Car" app
or by using the Volvo On Call mobile app. See
also the vehicle's owner's information and the
support site at support.volvocars.com.
To set a destination, in the navigation system's
normal view, press the thumb wheel/OK/MENU
and select
Set destination.
Setting a destination using Home
A home location must have been stored before it
can be used.
–
In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination Home.
> Guidance will begin.
Setting a destination using an address
It is enough to enter the name of a city, area,
town, etc. in order to be guided to its center.
NOTE
The definition of a city or area may vary from
state to state, and also within the same state.
It will sometimes be an entire city, or a partic-
ular section of a city.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination Address.
2. Fill in one or more of the following:
•
Country:
•
City:
•
Street:
•
Number:
•
Intersection
3. For additional information about the destina-
tion, select
Information followed by the type
of information desired:
•
Map: displays a map of the location with
additional information when available.
•
Call number
1
: A call will be initiated if a
phone number has been provided.
•
Online info.
1
: Additional information can
be downloaded from the Internet
2
.
4. To store an address in the system's memory,
select
Save followed by Stored location or
Home.
1
Requires a paired and connected cell phone, see the owner's information.
2
Requires an Internet connection.
SETTING A DESTINATION, ITINERARY AND ROUTE
}}
19
5. Set the address as an intermediate destina-
tion or a single destination:
•
Add as waypoint: adds the address as
an intermediate destination (waypoint) to
the itinerary.
•
Set single destination: deletes any pre-
vious destinations in an itinerary and
starts guidance to the selected destina-
tion.
Setting a destination using a point of
interest (POI)
A point of interest is a general name for tourist
attractions or facilities such as hotels, gas sta-
tions, etc.
The map database contains a large number of
searchable POIs that can be selected as destina-
tions
3
.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination Point of interest (POI).
2. Search for a POI in the following ways:
•
By name: displays the text wheel to
search for the name of a POI, e.g.,
"Peppe's". The entire map area will be
included in the search. See also Map and
system information(p. 42).
•
By category: limits the POI search to
specific categories (e.g., bank/hotel/
museum).
•
Near the car: searches for POIs near the
vehicle's current location.
•
Along the route: searches for POIs
along the current itinerary.
•
Near the destination: searches for POIs
near the destination.
•
Around point on map: searches for
POIs by scrolling with the cursor.
For additional information about the destina-
tion, select
Information followed by the type
of information desired.
3. To store the address in the system's memory,
select Save followed by Stored location or
Home.
4. Set the address as an intermediate destina-
tion or a single destination:
•
Add as waypoint: adds the address as
an intermediate destination (waypoint) to
the itinerary.
•
Set single destination: deletes any pre-
vious destinations in an itinerary and
starts guidance to the selected destina-
tion.
Setting a destination using a stored
location
This function is a collection of destinations that
have been stored using the menu alternative
Save Stored location.
Please note that one or more destinations has to
have been previously stored.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination Stored location.
3
To select a POI on the map, see Points of interest (POIs) on the map (p. 29)
||
SETTING A DESTINATION, ITINERARY AND ROUTE
20
2. Open the stored destination:
•
Routes: e.g., recorded sections of the
route.
•
Other: e.g., stored locations.
For additional information about the destina-
tion, select
Information followed by the type
of information desired.
It is also possible to delete or edit a stored
destination by selecting Edit, Delete or
Delete all.
3. Set the address as an intermediate destina-
tion or a single destination:
•
Add as waypoint: adds the address as
an intermediate destination (waypoint) to
the itinerary.
•
Set single destination: deletes any pre-
vious destinations in an itinerary and
starts guidance to the selected destina-
tion.
Setting a destination using a previous
destination
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination Previous destination.
2. Select a destination from the list.
For additional information about the destina-
tion, select
Information followed by the type
of information desired.
A destination can also be deleted by select-
ing Delete or Delete all.
3. Set the address as an intermediate destina-
tion or a single destination:
•
Add as waypoint: adds the address as
an intermediate destination (waypoint) to
the itinerary.
•
Set single destination: deletes any pre-
vious destinations in an itinerary and
starts guidance to the selected destina-
tion.
Setting a destination using an Internet
search
An Internet connection is required, see the
owner's information.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination Internet search.
2. Follow the instructions on the screen.
Setting a destination using a zip code
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination Zip code.
2. Enter the zip code and the country if neces-
sary.
For additional information about the destina-
tion, select
Information followed by the type
of information desired.
3. To store an address in the system's memory,
select Save followed by Stored location or
Home.
4. Set the address as an intermediate destina-
tion or a single destination:
•
Add as waypoint: adds the address as
an intermediate destination (waypoint) to
the itinerary.
•
Set single destination: deletes any pre-
vious destinations in an itinerary and
starts guidance to the selected destina-
tion.
Setting a destination using latitude and
longitude
SETTING A DESTINATION, ITINERARY AND ROUTE
}}
21
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination Latitude and longitude.
2. Begin by deciding which type of GPS coordi-
nates are to be used by selecting
Format:
•
DD°MM'SS'': location in degrees,
minutes and seconds.
•
Decimal: location expressed in decimals.
3. Enter the GPS coordinates.
For additional information about the destina-
tion, select
Information followed by the type
of information desired.
4. To store an address in the system's memory,
select
Save followed by Stored location or
Home.
5. Set the address as an intermediate destina-
tion or a single destination:
•
Add as waypoint: adds the address as
an intermediate destination (waypoint) to
the itinerary.
•
Set single destination: deletes any pre-
vious destinations in an itinerary and
starts guidance to the selected destina-
tion.
Setting a destination using a position
on the map
The cursor's position given in GPS coordinates. To dis-
play the name, select Settings
Map options
Position information.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination Select point on map.
2. Move the cursor to the desired position, see
also Menus(p. 11) .
3. To store the position in the system's memory,
press the thumb wheel/OK/MENU and
select
Save followed by Stored location or
Home.
> the destination will be stored as a sym-
bol/icon on the map if the function
Stored location on map is selected, see
also Map alternatives (p. 29).
4. Set the address as an intermediate destina-
tion or a single destination:
•
Add as waypoint: adds the address as
an intermediate destination (waypoint) to
the itinerary.
•
Set single destination: deletes any pre-
vious destinations in an itinerary and
starts guidance to the selected destina-
tion.
Setting a destination using the travel
guide
Searching using travel guide (not available in all
areas) offers suggested destinations/routes
according to various themes such as restaurants,
scenic drives, sight-seeing, etc.
A travel guide is stored on a USB flash drive that
has to be plugged into the vehicle's USB socket
in the tunnel console storage compartment.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination Travel guide.
If this menu alternative is not displayed, this
is because there are no suggestions for your
current location or no USB flash drive is con-
nected.
||
SETTING A DESTINATION, ITINERARY AND ROUTE
22
2. Select the travel guide using one of the fol-
lowing categories:
•
Restaurants
•
Tourist attractions
•
Hotels
•
Tourist routes
•
Other
3. If available in the travel guide, to display
details, images, or play audio:
•
Details
•
Photos
•
Play audio
4.
Select
Start guidance.
Related information
•
Navigation – text wheel and keypad (p. 13)
•
Sensus navigation (p. 11)
•
Navigation – itineraries (p. 23)
Navigation – points of interest (POI)
symbols
This article provides examples of the svarious
symbols for points of interest that may be dis-
played on the map.
To choose the POIs to be displayed on the map,
see the article Map alternatives(p. 29).
NOTE
POI symbols may be added/removed when
the system is updated. The symbols available
for the current map information can always be
found under
Settings Map options
POI symbols Selected.
POI symbols, grouped according to functions:
Car dealer/repair
Gas station
Car repair
Parking
Tourist attraction
Golf
Cinema
Amusement park
Recreation
Restaurant
Bar or cafe
Shopping center
Hotel
Railway transport
Railway station
Railway access
Airport
Bus station
Ferry terminal
Government or comunity facility
Government office
Police/emergency
Library
SETTING A DESTINATION, ITINERARY AND ROUTE
}}
23
Hospital or health care facility
Pharmacy
Cash dispenser
ATM/Bank exchange
Post office
Education facility
Related information
•
Navigation: setting a destination (p. 18)
•
Navigation – map options (p. 29)
•
Navigation – guidance alternatives (p. 31)
•
Navigation – map and system information
(p. 42)
•
Navigation – importing/exporting stored
locations (p. 34)
Navigation – itineraries
This article shows how to create an itinerary and
start guidance to the desired destination.
An itinerary is created when a destination has
been saved. The system handles one itinerary at
a time, with a maximum of 4 intermediate desti-
nations (waypoints).
A destination must be selected before an itiner-
ary can be activated.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Itinerary.
2. To add intermediate destinations (waypoints),
select
Add another waypoint.
Up to four intermediate destinations can be
added to an itinerary. To change their order
in the itinerary, see "Reordering intermediate
destinations" below.
3. For more detailed information about an inter-
mediate destination, select it, press the
thumb wheel/OK/MENU and select
Information.
4.
Select
Start guidance.
> The current itinerary will be activated and
guidance will begin unless the Route
proposal(p. 24) function is activated.
5.
If
Route proposals is activated, select the
type of route desired.
> The current itinerary will be activated and
guidance will begin.
Canceling guidance
–
In the navigation system's normal view, press
NAV and select
Cancel guidance.
> Guidance will be canceled.
Resuming guidance
–
In the navigation system's normal view, press
NAV and select
Resume guidance.
> Guidance will be resumed.
||
SETTING A DESTINATION, ITINERARY AND ROUTE
24
Modifying itineraries
1. Select the intermediate destination and con-
firm by pressing the thumb wheel/OK/
MENU.
2. Select one of the following:
•
Delete: remove the intermediate destina-
tion from the list.
•
Move in list: reorder the list (see the fol-
lowing heading).
•
Save: stores (saves) the intermediate
destination.
Reordering intermediate destinations
1. Select the intermediate destination to be
moved in the list and confirm by pressing the
thumb wheel/OK/MENU.
> A pop-up menu will open.
2.
Select
Move in list and confirm by pressing
the thumb wheel/OK/MENU.
3.
Turn the thumb wheel/TUNE to move the
intermediate destination up/down in the list.
4.
Confirm by pressing the thumb wheel/OK/
MENU.
Deleting (clearing) an itinerary
–
In the navigation system's normal view, press
NAV and select
Itinerary Clear itinerary.
> The current itinerary and its intermediate
destinations will be deleted.
Related information
•
Navigation: setting a destination (p. 18)
•
Navigation – routes (p. 24)
•
Navigation – importing/exporting stored
locations (p. 34)
Navigation – routes
A route can be displayed in detail or an overview
can be selected. This article describes how an
alternative route can be selected from a list of
pre-calculated ones.
Avoiding a route
This function enables the driver to avoid the next
section of a route. This feature will only function if
there are alternative streets/roads available. Oth-
erwise, the marked section of the route will be
completely/partially ignored.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Route Avoid.
SETTING A DESTINATION, ITINERARY AND ROUTE
}}
25
2. Select one of the following:
Highlighted section of a route
•
Reroute: the system will calculate a new
route that avoids the highlighted section.
•
Longer: the section of the route to be
avoided will be extended.
•
Shorter: the section of the route to be
avoided will be shortened.
•
Delete: the highlighted section of the
route will be deleted and the route will be
restored to its original version.
The
Avoid area feature functions in a similar way
but allows you to avoid an entire area on the map,
see Route options (p. 27).
Alternative routes
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Route Alternative routes to
destination
.
2.
Select an alternative
Route type:
•
ECO with traffic adaption: prioritizes low
fuel consumption
4
.
•
Fast: prioritizes the shortest possible
travel time.
•
Fast with traffic adaption: the quickest
route to your destination with the fewest
number of traffic problems
4
.
•
Short: the shortest route is prioritized and
may also include secondary roads.
Route overview
–
In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Route Detailed route information.
> Information about the route's intermediate
and final destination will be displayed.
Detailed route information
This option displays detailed information about
the route between two intermediate destinations
(exits, intersections, etc.).
4
Coordinated with information from traffic radio.
||
SETTING A DESTINATION, ITINERARY AND ROUTE
26
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Route Route overview.
> Information about the route's intermediate
and final destination will be displayed.
Detailed section of a route
2.
Zoom in/Zoom out: change the map scale
for the current section of the route.
•
Next: go to the next section of the route.
•
Previous: go to the previous section of
the route.
Map of the remaining part of the route
This function shows the remaining section of
your route.
–
In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Route Map of remaining route.
> A map with the remainder of the route,
from the vehicle's current location, will be
displayed.
For a list of the available functions, see
Menus(p. 11) .
Recording a route
You can record and store a route in the naviga-
tion system's memory.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Route Record route.
> Recording will begin (the "REC" symbol
will be displayed while recording is in pro-
gress).
2.
To stop recording, press the thumb
wheel/OK/MENU and select
Route
Stop recording.
> The recorded route will be saved.
Recorded routes can be opened in
Set
destination
Stored location Routes.
Recorded routes can be exported/copied to a
USB flash drive
5
for use with another vehicle's
navigation system. For additional information, see
Importing/exporting stored locations(p. 34).
Related information
•
Navigation – itineraries (p. 23)
•
Sensus navigation (p. 11)
•
Navigation – traffic information (p. 36)
•
Navigation – troubleshooting (p. 46)
5
Connected to the USB socket in the tunnel console.
SETTING A DESTINATION, ITINERARY AND ROUTE
}}
27
Navigation – route options
Route option settings include e.g., type of route
and the number of alternative routes.
Route options
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Route options.
2. Select the type of route:
•
ECO with traffic adaption: prioritizes
low fuel consumption
6
.
•
Fast: prioritizes the shortest possible
travel time.
•
Fast with traffic adaption: the quickest
route to your destination with the fewest
number of traffic problems
6
.
•
Short: the shortest route is prioritized and
may also include secondary roads.
Rerouting on request
This selection enables you to request a new
route based on e.g., traffic information.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Route options Reroute on
request
.
2. Select a function:
•
Checked box: recalculation of the route
has to be confirmed by pressing the
thumb wheel/OK/MENU or ignored by
pressing EXIT.
•
Empty box: the system will automatically
recalculate the route.
Route proposals
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Route options Route
proposals
.
2.
Route proposals
Select one of the following:
•
1: guidance will begin along the route cal-
culated by the system.
•
3: The system will propose three different
routes. One of them must be selected
before guidance can begin. It may take
slightly longer before guidance begins
because the system has to first calculate
three suitable alternatives.
Using carpool lanes
7
Private vehicles are sometimes allowed to use
lanes reserved for buses, etc., assuming the vehi-
cle has at least one passenger. If this alternative
6
Coordinated with information from traffic radio.
7
This function is only available if this type of information is included in the map database.
||
SETTING A DESTINATION, ITINERARY AND ROUTE
28
is activated, lanes of this type will be included
when a route is calculated.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Route options Use carpool
lane
.
2. Select one of the following:
•
Never
•
For 2 persons
•
More than 2 persons
Using express lanes
7
Private vehicles are sometimes allowed to use
lanes reserved for buses, etc., assuming the vehi-
cle is classed as an eco-vehicle. If this alternative
is activated, lanes of this type will be included
when a route is calculated.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Route options Use express
lane
.
2. Select one of the following:
•
Checked box: express lanes will be
included when a route is calculated.
•
Empty box: express lanes will not be used.
Avoiding an area
7
This feature allows you to avoid an entire area on
the map when a route is calculated. It can be
used to avoid being guided through a particular
area, with the exception of highways, which are
used when a route is calculated even through
"avoided" areas.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Route options Avoid area.
2. Select and area along the route that will be
avoided (if this area is already on the list of
previously selected areas, continue with the
next step):
•
Select area on map: Select an area on
the map (see the section "Selecting an
area on the map" below for additional
information).
•
From stored location: select from the
list of previously stored areas.
> The selected area will be added to the list
of areas to be avoided.
3.
To select an area from the list, press the
thumb wheel/OK/MENU and select
Activate.
It is also possible to Edit, Deactivate and
Delete an area on the list.
> The area will be avoided when a route is
calculated.
7
This function is only available if this type of information is included in the map database.
SETTING A DESTINATION, ITINERARY AND ROUTE
}}
29
Selecting an area on the map
An area to be avoided is selected by marking it
directly on the map using a "box" (see the follow-
ing illustration).
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Route options Avoid area
Select area on map.
2. Scroll on the map to move the cursor to the
desired area.
3.
Press the thumb wheel/OK/MENU.
> A red box will be displayed.
4.
Turn the thumb wheel/TUNE to adjust the
size of the box.
5.
Press the thumb wheel/OK/MENU when
the box covers the desired area.
> This area will be stored and displayed in
the list of areas to be avoided.
To avoid being guided through an area on the list,
it must first be activated, see the previous section
"Avoiding an area" .
Avoiding certain types of roads/types of
transport
7
–
In the navigation system's normal view, press
OK/MENU and select
Settings Route
options
:
•
Avoid highways
•
Avoid toll roads
•
Avoid tunnels
•
Avoid ferries
•
Avoid car trains
•
Avoid vignette obligation
Related information
•
Navigation – traffic information (p. 36)
•
Navigation – itineraries (p. 23)
•
Navigation: setting a destination (p. 18)
•
Sensus navigation (p. 11)
Navigation – map options
This feature enables you to make settings for
displaying the map on the screen.
Full-screen map
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Map options Show full-
screen map
.
2. Choose a size:
•
Checked box: the map will be displayed
over the entire screen.
•
Empty box: other information, such as a
track being played on the infotainment
system and passenger compartment tem-
perature will still be displayed on the
upper and lower sections of the screen
respectively.
7
This function is only available if this type of information is included in the map database.
||
SETTING A DESTINATION, ITINERARY AND ROUTE
30
Map type
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Map options Map type.
2. Select how the map is to be displayed on the
screen:
•
North up: the map will always have north
at the top of the screen. The "vehicle"
symbol will move in the current direction
on the screen.
•
Map heading up: the "vehicle" symbol
will be at the center of the map and will
always point upward. The map will rotate
under the symbol, depending on the
direction of the road.
•
3D map basic: the map will be displayed
at an angle from above and the "vehicle"
symbol will be at the center of the map
and will always point upward.
•
3D map enhanced: the same as 3D
map basic but with objects such as build-
ings, etc. displayed on the map.
Highway information
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Map options Highway
information
.
2. Select a function:
•
Checked box: If you are driving on a high-
way, the next 3 exits will be displayed, e.g.,
exits where there are rest areas or gas
stations. The list is sorted so that the
nearest exit is at the bottom of the list.
•
Empty box: the function is deactivated.
Information about the current location
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Map options Position
information
.
2. Select the type of information to be dis-
played:
•
Current road: the name of the road
where you are driving/cursor is pointing is
displayed.
•
Lat/Long: the location's co-ordinates
where you are driving/cursor is pointing is
displayed.
•
None: No information will be displayed.
Compass
The direction in which you are driving will dis-
played as a compass pointer or with letters.
The compass needle's red
pointer points to the north. A
text-based compass can also
be selected.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Map options Compass.
2. Select to display the compass needle or let-
ters:
•
Graphic: a compass needle symbol indi-
cates the compass heading.
•
Text: the letters N (north), W (west), S
(south) or E (east) indicate the compass
heading.
Set the map orientation (north or direction
toward the top of the screen). See also the
previous section "Compass."
SETTING A DESTINATION, ITINERARY AND ROUTE
}}
31
Points of interest (POIs) on the map
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Map options POI symbols.
The selected POI s will be displayed on the map
2. Select the POI symbols to be displayed on
the map:
•
Default: – POIs chosen using the
Selected function will be displayed.
•
Selected: Turn the thumb wheel/TUNE
to scroll and select each desired POI by
pressing the thumb wheel/OK/MENU.
The selected POIs will be displayed on
the map.
•
None: no POIs will be displayed.
In order to make the map easier to read, the
number of POIs that are displayed at the same
time is limited. Zoom in on an area to display
more POIs.
Map colors
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Map options Map colors.
2. Select among the following:
•
Automatic: a sensor monitors the ambi-
ent lighting conditions and changes map
colors automatically.
•
Day: colors and contrast are adapted for
daylight conditions.
•
Night: colors and contrast are adapted for
dark conditions.
Stored locations on the map
–
In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Map options Stored
location on map
.
> All stored locations are listed here.
Related information
•
Navigation – route options (p. 27)
•
Navigation – guidance alternatives (p. 31)
•
Navigation – points of interest (POI) symbols
(p. 22)
•
Navigation – importing/exporting stored
locations (p. 34)
Navigation – guidance alternatives
Settings Guidance options
Arrival or remaining time
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Guidance options Time of
arrival format
.
2. Select one of the following:
•
ETA: estimated arrival time
•
RTA: estimated remaining travel time
Street names in voice guidance
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Guidance options Street
names in voice guidance
.
||
SETTING A DESTINATION, ITINERARY AND ROUTE
32
2. Select one of the following:
•
Checked box: distance, direction and
street/road names will be provided.
•
Empty box: distance and direction only will
be provided.
Turn-by-turn navigation
8
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Guidance options Turn-by-
turn navigation
.
2. Select one of the following:
•
Checked box: displays the next turn in
your route and the distance to it.
•
Empty box: no information will be dis-
played.
Automatic read-out
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Guidance options
Automatic read out of traffic.
2. Select one of the following:
•
Checked box: important traffic announce-
ments will be read aloud.
•
Empty box: no read-out.
Automatic audio fade-out
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Guidance options Audio
fadeout
.
2. Select one of the following:
•
Checked box: infotainment system audio
will fade out while the navigation system
is providing audible information.
•
Empty box: no fade-out.
Voice guidance
Audible guidance will be provided as the vehicle
approaches the next guidance point. A detailed
map will also appear on the center console
screen. The voice guidance will be repeated as
the vehicle gets closer to the guidance point. To
repeat the voice guidance, press the thumb
wheel/OK/MENU twice.
Use the infotainment system's volume control to
adjust voice guidance volume (while the system
is providing voice guidance).
NOTE
Voice guidance will not be provided while a
call using a Bluetooth-connected cell phone
is in progress.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Guidance options Voice
guidance
.
2. Select one of the following:
•
Checked box: the distance to the guid-
ance point and the action to be taken will
be provided.
•
Empty box: no voice guidance will be pro-
vided.
Simple voice guidance
Voice guidance is normally repeated 3 times prior
to each guidance point on your route: once in
advance, once immediately prior to the required
action and once when the action should be
taken.
8
Certain models only.
SETTING A DESTINATION, ITINERARY AND ROUTE
33
With simple voice guidance activated, voice guid-
ance will only be provided once for each guid-
ance point.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Guidance options Use
simple voice guidance
.
2. Select one of the following:
•
Checked box: voice guidance will only be
provided once for each guidance point.
•
Empty box: no voice guidance will be pro-
vided.
Speed cameras
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Guidance options Speed
camera warning
.
2. Select one of the following:
•
Checked box: an audible and visual signal
will be provided to alert the driver that the
vehicle is approaching a speed camera.
•
Empty box: no warning will be provided.
NOTE
•
Speed limits can be changed and may
not correspond to the information in the
navigation system's database.
•
The driver is always responsible for obey-
ing traffic and speed regulations.
•
The type of information that may be dis-
played on the map is regulated by
national/regional legislation. See
support.volvocars.com for up-to-date
information.
Stored location notification
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Guidance options Stored
location notification
.
2. Select one of the following:
•
Checked box: an audible signal alerts the
driver that the vehicle is approaching a
stored location.
•
Empty box: no audible signal will be provi-
ded.
Travel points of interest (POI) alert
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Guidance options Travel
POI notification
.
2. Select one of the following:
•
Checked box: an audible signal alerts the
driver that the vehicle is approaching a
POI that is included in a Travel guide
(p. 18).
•
Empty box: no audible signal will be provi-
ded.
Travel guide alert
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Guidance options Guided
tour notification
.
2. Select one of the following:
•
Checked box: an audible signal alerts the
driver that the vehicle is approaching an
area included in a Travel guide (p. 18).
•
Empty box: no audible signal will be provi-
ded.
Related information
•
Navigation – traffic information (p. 36)
SETTING A DESTINATION, ITINERARY AND ROUTE
34
Navigation – importing/exporting
stored locations
Stored destinations or routes can be imported or
exported from one vehicle to another.
Points of interest (POIs) can only be imported if
the file format is .gpx.
1. Connect a USB flash drive to the USB
socket in the tunnel console storage com-
partment.
2. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings Import/export stored
locations
.
3. Select what is to be imported/exported.
NOTE
The format for POI files and how they can be
downloaded from the Internet is determined
by their respective manufacturers/ distribut-
ers, which means that there is no standar-
dized process for doing so. Therefore, this
article cannot provide exact step-by-step
instructions. Contact your Volvo retailer if you
have any questions.
Related information
•
Navigation: setting a destination (p. 18)
•
Navigation – itineraries (p. 23)
•
Navigation – routes (p. 24)
•
Navigation – points of interest (POI) symbols
(p. 22)
TRAFFIC INFORMATION
TRAFFIC INFORMATION
36
Navigation – traffic information
The navigation system constantly receives upda-
ted traffic information, which is used for dynamic
guidance. When situations occur that may cause
delays (e.g., an accident, road work), this will be
displayed on the screen. If a destination has
been set, the route to it will be recalculated,
which can occur automatically or require confir-
mation, see Rerouting on request (p. 27).
TMC is a standardized system for broadcasting
traffic information. The vehicle's radio automati-
cally tunes to the correct frequency.
Traffic information is displayed differently
depending on whether or not a destination has
been set.
This symbol indicates that traf-
fic information is available in
the current broadcast area and
will displayed in two colors
depending on the importance
of the information:
•
RED: the information will be read aloud and
the location of the problem will be shown on
the map.
•
YELLOW: the information will not be read
aloud but the location of the problem will be
shown on the map.
This symbol marks the location
of a traffic problem. For more
information, see "Traffic infor-
mation on the map" below.
NOTE
Traffic information is not available in all areas.
Traffic information coverage is being
increased continuously.
Activating/deactivating
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Traffic information.
2. Check/uncheck the box to activate/deacti-
vate the function.
Traffic information without a set
destination
This function makes it possible to show traffic
problems in situations where no destination has
been set.
Scroll function on the map opens
Traffic information on the map
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Traffic information Traffic on map.
2. Search for traffic problems using the scroll
function, see also "Traffic information with a
set destination" below.
All traffic
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Traffic information Traffic on map.
> A list of all traffic announcements in the
current broadcast area will be displayed.
2. Select what is to be displayed, see also
"Traffic information with a set destination" >
"All traffic."
TRAFFIC INFORMATION
}}
37
Traffic information with a set
destination
This function shows traffic problems when a des-
tination has been set.
Listening to traffic announcements along a
route
–
In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Traffic information Listen to traffic on
route
.
> Current traffic announcements along the
route will be read aloud.
All traffic
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Traffic information All traffic.
> All traffic information in the current broad-
cast area will be listed. Traffic information
is primarily grouped by country (in border
areas) followed by road numbers and
street names.
2. Select a traffic problem and confirm by
pressing the thumb wheel/OK/MENU.
> The traffic problems will be listed with the
most serious ones at the top of the list.
3. Select a traffic problem and confirm by
pressing the thumb wheel/OK/MENU.
> Additional information and the location on
the map will be displayed. The map image
will be centered around the location of the
problem.
Traffic information on the map
Traffic information on the map
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Traffic information Traffic on map.
2. For detailed information, scroll the map until
the cursor is over the traffic problem/symbol
desired.
> A yellow frame will appear around the
symbol.
3.
Confirm by pressing the thumb wheel/OK/
MENU.
> The following information will be displayed
if available:
•
street name/road number
•
country
•
type of problem
•
extent of the problem
•
expected duration of the problem
If there are several traffic problems inside
the cursor's frame, the first problem dis-
played will be the one closest to the cen-
ter of the cursor.
Numbers such as "
2/5" at the top of the
screen indicate that the current informa-
tion is the second problem of a total of
five within the frame. Press the thumb
wheel/OK/MENU repeatedly to toggle to
the other information.
||
TRAFFIC INFORMATION
38
Direct listed information
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Traffic information Traffic on map.
> Direct listed traffic problems (two in the
previous illustration) indicate that the
information pertains to your current itiner-
ary.
2. Select a traffic problem and confirm by
pressing the thumb wheel/OK/MENU.
> Additional information and the location on
the map will be displayed. The map image
will be centered around the location of the
problem.
Traffic problem on the map
Extent of a traffic problem
Some traffic problems may affect an extended
area and this function shows the extent (scope)
of the problem.
In addition to the symbol marking the location of
the traffic problem, the effected stretch of road
will be indicated by red Xs (xxxxx).
•
The number of Xs indicates the extent of the
problem.
•
The direction is indicated by the side of the
road that the Xs are on.
Extent of a traffic problem
Size of the traffic information area
The map scale determines the amount of traffic
information that can be displayed. The larger the
area on the maps, the greater the number of traf-
fic problems that can be shown.
Related information
•
Navigation – guidance alternatives (p. 31)
•
Navigation: setting a destination (p. 18)
•
Navigation – itineraries (p. 23)
TRAFFIC INFORMATION
39
Navigation–Real Time Traffic
Information (RTTI)
When the vehicle is connected to the Internet,
enhanced traffic information (RTTI
1
) may be
available
2
.
Generic illustration
Information about current traffic situations is
gathered continuously from mobile apps, public
service sources and GPS data from the vehicle.
When a vehicle requests information about the
flow of traffic, anonymous data about the traffic
situation in the vicinity of the vehicle is provided,
which helps enable RTTI to function. This data is
only transmitted if RTTI is activated.
Current traffic information is shown for highways/
freeways, major roads, secondary roads and in
some cases for urban routes.
The amount of traffic information shown on the
map depends on the distance from the vehicle,
but not farther than approx. 75 miles (120 km)
from the vehicle's current location.
Text and symbols on the map are displayed in the
usual way and the traffic flow shows how fast
traffic is moving on a given road compared to the
posted speed limit. Traffic information is shown in
both directions on a road with a colored line in
each direction:
•
Green: traffic flowing smoothly
•
Orange: slow-moving traffic
•
Red: traffic tie-up/accident
NOTE
Traffic information is not available in all areas.
Traffic information coverage is being
increased continuously.
Activating/deactivating
The vehicle must be connected to the Internet in
order to use RTTI.
1. In the navigation system's normal view, press
OK/MENU and select
Settings Use
Real Time Traffic Information
.
2. Check the box to activate RTTI or deselect it
to deactivate the function.
Related information
•
Navigation – traffic information (p. 36)
•
Navigation – route options (p. 27)
•
Navigation – map options (p. 29)
•
Navigation – guidance alternatives (p. 31)
1
Real Time Traffic Information
2
Certain markets only.
MAP AND SYSTEM INFORMATION
MAP AND SYSTEM INFORMATION
42
Navigation – map and system
information
Volvo offers maps covering North America as
well as other parts of the world.
During updates, new information is added and
older, possibly outdated information is removed.
System information
–
In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings System information.
> A summary of the current navigation sys-
tem status, such as the current traffic
information transmitter, operative map
data and map version will be displayed.
Map content
NOTE
Map data may not provide complete coverage
of all remote areas.
The areas covered are constantly being
expanded, which means that map updates are
necessary occasionally. Contact your Volvo
retailer.
See support.volvocars.com for map and other
Sensus Navigation-related information.
Map areas
The map information in your vehicle is deter-
mined by your country/market. Contact a Volvo
retailer if map information for another area is
required.
Map updates
Map updates are downloaded from the Internet
1
to a USB flash drive
2
. The information is then
transferred to the vehicle's navigation system
using the USB socket in the tunnel console.
NOTE
•
Instructions for downloading information
and updating the navigation system are
available on the Internet.
•
For questions regarding updates, contact
a Volvo retailer or go to
support.volvocars.com.
1
See the information at support.volvocars.com.
2
The flash drive must have at least 20 Gb of free space.
MAP AND SYSTEM INFORMATION
}}
43
Updating
Follow the on-screen instructions for updating
the navigation system. They will show the various
stages in the update procedure and the time
remaining.
NOTE
Some of the navigation system's functions will
be disabled or reduced while updating is in
progress.
1. With the vehicle parked outdoors, start the
engine.
2. Connect the USB flash drive to the vehicle's
USB socket and follow the instructions
shown on the center console screen.
>
When
Map update finished is displayed,
the procedure is completed and all of the
navigation system's functions can be used
normally.
Updating the system may add new functionality
that is not described in this manual.
Resuming an interrupted update
If the update was not completed when the
engine was switched off, the procedure can be
resumed where it left off the next time the engine
is started if the USB flash drive is still connected.
If the flash drive has been removed, start the
engine and reconnect the USB flash drive.
When
Map update finished is displayed, the
procedure is completed.
Related information
•
Navigation – License agreements and copy-
rights (p. 48)
•
Navigation – troubleshooting (p. 46)
•
Sensus Navigation (p. 7)
Navigation – Menu overview
This article provides an overview of the naviga-
tion system's menu alternatives and possible set-
tings that can be made.
Three menu levels are shown here. In certain
cases, there may be additional levels, which are
described in their respective articles.
–
In the navigation system's normal view, press
the thumb wheel/OK/MENU to open the
menu.
Repeat voice guidance
(p. 31)
Set destination
(p. 18)
Home
(p. 18)
||
MAP AND SYSTEM INFORMATION
44
Address
Country:
City:
Street:
Number:
Intersection
Set single destination
Add as waypoint
Information
Save
(p. 18)
Point of interest (POI)
By name
By category
Near the car
Along the route
Near the destination
Around point on map
(p. 18)
Stored location
Set single destination
Edit
Delete
Delete all
(p. 18)
Previous destination
Set single destination
Add as waypoint
Information
Save
Delete
Delete all
(p. 18)
Internet search
(p. 18)
Zip code
Country:
Zip code
Street:
Number:
Intersection
Set single destination
Add as waypoint
Information
Save
(p. 18)
Latitude and longitude
Format:
Set single destination
Add as waypoint
Information
Save
(p. 18)
Select point on map
Set single destination
Add as waypoint
Save
(p. 18)
MAP AND SYSTEM INFORMATION
}}
45
Travel guide
Start guidance
Details
Photos
Play audio
Pause audio
(p. 18)
Itinerary
Itinerary
Start guidance
Add another waypoint
Clear itinerary
(p. 23)
Route
Avoid
Reroute
Longer
Shorter
Delete
(p. 24)
Alternative routes to destination
(p. 24)
Detailed route information
(p. 24)
Route overview
Next
Previous
Zoom in
Zoom out
(p. 24)
Map of remaining route
(p. 24)
Record route
or
Stop recording
(p. 24)
Traffic information
(p. 36)
All traffic
Traffic on map
(p. 36)
Cancel guidance
or
Resume guidance
(p. 23)
Settings
Route options
Route type
Reroute on request
Route proposals
Use carpool lane
Use express lane
Avoid area
Avoid highways
Avoid toll roads
Avoid tunnels
Avoid ferries
Avoid car trains
(p. 27)
Map options
Show full-screen map
Map type
Highway information
Position information
Compass
POI symbols
Map colors
Stored location on map
(p. 29)
||
MAP AND SYSTEM INFORMATION
46
Guidance options
Time of arrival format
Street names in voice
guidance
Turn-by-turn navigation
Automatic read out of
traffic
Audio fadeout
Voice guidance
Use simple voice guid-
ance
Speed camera warning
Stored location notifica-
tion
Travel POI notification
Guided tour notification
(p. 31)
System information
(p. 42)
FAV key options
See the
article
"Favor-
ites" in
your
owner's
manual.
Import/export stored locations
(p. 34)
Related information
•
Sensus navigation (p. 11)
•
Sensus Navigation (p. 7)
Navigation – troubleshooting
The following information provides examples of
situations in which the navigation system may
not seem to be functioning properly.
The vehicle’s position on the map is
incorrect
Sensus Navigation uses the Global Positioning
System (GPS), which indicates the vehicle’s posi-
tion with an accuracy of about 65 feet
(20 meters).
Accuracy may be even less when driving on roads
lying parallel to another road, winding roads,
roads on several levels, and also after driving a
long distance without making any distinct turns.
Tall buildings and mountains, tunnels, viaducts,
over/underpasses etc., also have a negative
affect on the reception of GPS signals, which
means that the estimation of the vehicle’s posi-
tion may not be precise.
The system does not always calculate
the fastest/shortest route
Parameters such as distance, width of road, type
of road, number of right or left turns, traffic circles
etc., are all taken into account when calculating
the best theoretical route. Experience and local
knowledge may, however, lead to a better choice
of route.
MAP AND SYSTEM INFORMATION
}}
47
The system chooses toll roads,
freeways, and ferries even though I
have opted to avoid them
When calculating routes over longer distances,
for technical reasons the system can only use
major roads.
If you opt to avoid for toll roads and freeways,
they will be avoided as much as possible, but will
be used if no other reasonable alternative is
available.
After being transported, the vehicle’s
position on the map is incorrect
If the vehicle is transported, for example by ferry
or train, or in such a way as to impede the recep-
tion of GPS signals, it can take up to 5 minutes
to calculate the car’s new position correctly.
The vehicle’s position on the map is
incorrect after its battery has been
disconnected
If power has been cut from the GPS antenna, it
can take more than 5 minutes for the GPS sig-
nals to be received correctly and the vehicle’s
position to be calculated.
The "car" symbol on the map moves
erratically after a tire change
In addition to the GPS receiver, the vehicle’s
speedometer and an onboard gyro are also used
to calculate the vehicle’s current location and
direction of travel. If the spare tire is put on the
vehicle, or if a change is made from summer to
winter tires (or vice versa), the navigation system
must "learn" the new dimensions of the tire(s).
Therefore, it may be necessary to drive for several
miles, including a number of full turns, for the
system to make this adjustment.
The map image does not correspond to
actual conditions
Factors such as the constant expansion and
rebuilding of the road network, new traffic regula-
tions constantly being introduced etc., mean that
the digital map database is not always complete.
The map database is enhance and updated regu-
larly. Please contact your Volvo retailer for more
information about availability.
See also support.volvocars.com for additional
information about maps, etc.
The map scale sometimes changes
There may not be detailed map information for
certain areas. If such cases, the system automati-
cally changes the map scale.
The "car" symbol on screen jumps
forward or spins
The system may need a few seconds to sense
the vehicle's position and movement before you
begin driving.
Switch off the ignition. Restart the engine but
wait for a short period before beginning to drive.
I am planning a long trip but do not
want to specify a route to the cities that
I will be passing through. What is the
easiest way to set up an itinerary?
Select the final destination directly on the map
using the cursor. The system will automatically
guide you to the final destination even if you drive
past intermediate destinations.
The system’s map information is not
up-to-date
Contact your Volvo retailer about updating map
information.
See also support.volvocars.com.
WARNING
Navigating safely
Always use good judgment when following
navigation system guidance, and do not follow
guidance that seems contrary to your own
best judgment.
What is the easiest way to check the
current map version?
In the vehicle's menu system, go to Settings
System information for information about the
map version and which geographic area it covers,
see (p. 42).
||
MAP AND SYSTEM INFORMATION
48
Related information
•
Navigation – map and system information
(p. 42)
•
Navigation – routes (p. 24)
•
Navigation – route options (p. 27)
Navigation – License agreements
and copyrights
The following is information for the end-user of
the Sensus Navigation system.
ENDUSER LICENSE AGREEMENT
ENDUSER TERMS
The content provided (“Data”) is licensed, not
sold. By opening this package, or installing,
copying, or otherwise using the Data, you agree
to be bound by the terms of this agreement. If
you do not agree to the terms of this agreement,
you are not permitted to install, copy, use, resell
or transfer the Data. If you wish to reject the
terms of this agreement, and have not installed,
copied, or used the Data, you must contact your
retailer or HERE North America, LLC (as defined
below) within thirty (30) days of purchase for a
refund of your purchase price. To contact HERE,
please visit www.here.com.
The Data is provided for your personal, internal
use only and may not be resold. It is protected by
copyright, and is subject to the following terms
(this “EndUser License Agreement”) and
conditions which are agreed to by you, on the
one hand, and HERE and its licensors (including
their licensors and suppliers) on the other hand.
For purposes of these terms, “HERE” shall mean
(a) HERE North America, LLC with respect to
Data for the Americas and/or the Asia Pacific
region and (b) HERE Europe B.V. for Data for
Europe, the Middle East and/or Africa.
The Data includes certain information and related
content provided under license to HERE from
third parties and is subject to the applicable
supplier terms and copyright notices set forth at
the following URL: http://corporate.navteq.com/
supplier_terms.html
MAP AND SYSTEM INFORMATION
}}
49
TERMS AND CONDITIONS
License Limitations on Use: You agree that
your license to use this Data is limited to and
conditioned on use for solely personal, non-
commercial purposes, and not for service bureau,
timesharing or other similar purposes. Except as
otherwise set forth herein, you agree not to
otherwise reproduce, copy, modify, decompile,
disassemble or reverse engineer any portion of
this Data, and may not transfer or distribute it in
any form, for any purpose, except to the extent
permitted by mandatory laws.
License Limitations on Transfer: Your limited
license does not allow transfer or resale of the
Data, except on the condition that you may
transfer the Data and all accompanying materials
on a permanent basis if: (a) you retain no copies
of the Data; (b) the recipient agrees to the terms
of this End User License Agreement; and (c) you
transfer the Data in the exact same form as you
purchased it by physically transferring the original
media (e.g., the CD-ROM or DVD you purchased),
all original packaging, all Manuals and other
documentation. Specifically, Multidisc sets may
only be transferred or sold as a complete set as
provided to you and not as a subset thereof.
Additional License Limitations: Except where
you have been specifically licensed to do so by
HERE in a separate written agreement, and
without limiting the preceding paragraph, your
license is conditioned on use of the Data as
prescribed in this agreement, and you may not (a)
use this Data with any products, systems, or
applications installed or otherwise connected to
or in communication with vehicles capable of
vehicle navigation, positioning, dispatch, real time
route guidance, fleet management or similar
applications; or (b) with, or in communication
with, including without limitation, cellular phones,
palmtop and handheld computers, pagers, and
personal digital assistants or PDAs.
Warning: This Data may contain inaccurate or
incomplete information due to the passage of
time, changing circumstances, sources used and
the nature of collecting comprehensive
geographic Data, any of which may lead to
incorrect results.
No Warranty: This Data is provided to you “as is”,
and you agree to use it at your own risk. HERE
and its licensors (and their licensors and
suppliers) make no guarantees, representations
or warranties of any kind, express or implied,
arising by law or otherwise, including but not
limited to, content, quality, accuracy,
completeness, effectiveness, reliability, fitness for
a particular purpose, usefulness, use or results to
be obtained from this Data, or that the Data or
server will be uninterrupted or error free.
Disclaimer of Warranty: HERE AND ITS
LICENSORS (INCLUDING THEIR LICENSORS
AND SUPPLIERS) DISCLAIM ANY
WARRANTIES, EXPRESS OR IMPLIED, OF
QUALITY, PERFORMANCE,
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR NON-
INFRINGEMENT. Some States, Territories and
Countries do not allow certain warranty
exclusions, so to that extent the above exclusion
may not apply to you.
Disclaimer of Liability: HERE AND ITS
LICENSORS (INCLUDING THEIR LICENSORS
AND SUPPLIERS) SHALL NOT BE LIABLE TO
YOU IN RESPECT OF ANY CLAIM, DEMAND
OR ACTION, IRRESPECTIVE OF THE NATURE
OF THE CAUSE OF THE CLAIM, DEMAND OR
ACTION ALLEGING ANY LOSS, INJURY OR
DAMAGES, DIRECT OR INDIRECT, WHICH MAY
RESULT FROM THE USE OR POSSESSION OF
THIS DATA; OR FOR ANY LOSS OF PROFIT,
REVENUE, CONTRACTS OR SAVINGS, OR ANY
OTHER DIRECT, INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF YOUR USE OF OR INABILITY
TO USE THIS DATA, ANY DEFECT IN THIS
DATA, OR THE BREACH OF THESE TERMS OR
CONDITIONS, WHETHER IN AN ACTION IN
CONTRACT OR TORT OR BASED ON A
WARRANTY, EVEN IF HERE OR ITS
LICENSORS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. Some
States, Territories and Countries do not allow
certain liability exclusions or damages limitations,
so to that extent the above may not apply to you.
Export Control: You agree not to export from
anywhere any part of the Data or any direct
product thereof except in compliance with, and
||
MAP AND SYSTEM INFORMATION
50
with all licenses and approvals required under,
applicable export laws, rules and regulations,
including but not limited to the laws, rules and
regulations administered by the Office of Foreign
Assets Control of the U.S. Department of
Commerce and the Bureau of Industry and
Security of the U.S. Department of Commerce. To
the extent that any such export laws, rules or
regulations prohibit HERE from complying with
any of its obligations hereunder to deliver or
distribute Data, such failure shall be excused and
shall not constitute a breach of this Agreement.
Entire Agreement: These terms and conditions
constitute the entire agreement between HERE
(and its licensors, including their licensors and
suppliers) and you pertaining to the subject
matter hereof, and supersedes in their entirety
any and all written or oral agreements previously
existing between us with respect to such subject
matter.
Severability: You and HERE agree that if any
portion of this agreement is found illegal or
unenforceable, that portion shall be severed and
the remainder of the Agreement shall be given
full force and effect.
Governing Law: The above terms and conditions
shall be governed by the laws of the State of
Illinois (for Data for the Americas and/or the Asia
Pacific region) or The Netherlands (for Data for
Europe, the Middle East and Africa), without
giving effect to (i) its conflict of laws provisions,
or (ii) the United Nations Convention for
Contracts for the International Sale of Goods,
which is explicitly excluded. For any and all
disputes, claims and actions arising from or in
connection with the Data (“Claims”), you agree to
submit to the personal jurisdiction of (a) the State
of Illinois for Claims related to Data for the
Americas and/or the Asia Pacific region provided
to you hereunder, and (b) The Netherlands for
Data for Europe, the Middle East and/or Africa
provided to you hereunder.
Government End Users: If the Data is being
acquired by or on behalf of the United States
government or any other entity seeking or
applying rights similar to those customarily
claimed by the United States government, this
Data is a “commercial item” as that term is
defined at 48 C.F.R. (“FAR”) 2.101, is licensed in
accordance with this End User License
Agreement, and each copy of Data delivered or
otherwise furnished shall be marked and
embedded as appropriate with the following
“Notice of Use”, and be treated in accordance
with such Notice:
NOTICE OF USE
CONTRACTOR (MANUFACTURER/ SUPPLIER)
NAME:
HERE
CONTRACTOR (MANUFACTURER/SUPPLIER)
ADDRESS:
425 West Randolph Street, Chicago, IL
60606.
This Data is a commercial item as defined in FAR
2.101 and is subject to the End User License
Agreement under which this Data was provided.
© 1987-2013 HERE. All rights reserved. If the
Contracting Officer, federal government agency,
or any federal official refuses to use the legend
provided herein, the Contracting Officer, federal
government agency, or any federal official must
notify HERE prior to seeking additional or
alternative rights in the Data. © 1987-2013
HERE. All rights reserved.
MAP AND SYSTEM INFORMATION
}}
51
CONTRATO DE LICENCIA DE USUARIO
FINAL
Términos del Usuario Final
El contenido (Información) que se proporciona se
hace bajo licencia, no se vende. Al abrir este
paquete, instalar, copiar, o de alguna otra manera
usar la Información, usted está de acuerdo en
regirse por los términos de este contrato. Si no
está de acuerdo con los términos de este
contrato, no se le permitirá instalar, copiar,
revender ni transferir la Información. Si desea
rechazar los términos del presente, y no ha
instalado, copiado ni usado la Información, debe
comunicarse con su vendedor, o con HERE
North America, LLC ("HERE") dentro de 30 días
después de comprar el producto para obtener un
rembolso por el precio de compra. Para
comunicarse con HERE, por favor visite
www.here.com.
La Información que se proporciona es para su
uso personal interno únicamente y no se puede
revender. La Información está protegida por
derecho de autor y sujeta a los siguientes
términos (este “Contrato de Licencia de Usuario
Final”) y condiciones acordados por usted, por un
lado, y por el otro lado, por HERE North América,
LLC (“HERE”) y sus licenciantes (incluyendo los
licenciantes y proveedores de estos). Para
propósitos de éstos términos, “HERE” significa
(a) HERE North America, LLC con respecto a los
Datos para las Americas y/o para la región Asia
Pacífico y (b) HERE Europe B.V.a para los Datos
de Europa, Medio Oriente y/o África.
Los Datos incluyen cierta información y
contenido relacionado bajo licencia a HERE por
terceros y está sujeta a los términos aplicables
del proveedor y avisos de derechos de autor
contenidas en el siguiente URL: http://
corporate.navteq.com/supplier_terms.html
TÉRMINOS Y CONDICIONES
Limitaciones de la licencia sobre el uso: Usted
acuerda que su licencia para usar esta
Información queda limitada y condicionada para
propósitos únicamente personales, no
comerciales, y no es para oficinas de servicio,
tiempo compartido ni ningún otro propósito
similar. Salvo que se establezca lo contrario en el
presente documento, usted acuerda que de
ninguna otra forma ha de reproducir, copiar,
modificar, descompilar, desarmar ni aplicar
ingeniería inversa sobre ninguna parte de dicha
Información, y por ningún motivo ni de ninguna
otra forma podrá transferir ni distribuir, salvo en la
medida en que sea permitido por leyes
obligatorias. Limitaciones de la Licencia Sobre
Transferencias: Su licencia limitada no permite la
transferencia ni reventa de la Información, salvo
en las condiciones que usted pueda transferir la
Información y todo el material que le acompañe
de manera permanente si: (a) usted no se queda
con ninguna copia de la Información; (b) el
beneficiario está de acuerdo con los términos de
este Contrato de licencia de usuario final; y (c)
usted transfiere la Información en la manera
exacta en la que la compró transfiriendo
físicamente el medio original (por ejemplo, CD-
ROM o DVD que haya comprado), toda la
envoltura original, todos los Manuales y otra
documentación. Específicamente, los sets de
varios discos únicamente podrán ser transferidos
o vendidos como un set complete tal y como le
fue proporcionado a usted y no como un set
adicional.
Limitaciones Adicionales de la Licencia: Salvo
cuando HERE le haya dado licencia específica
para hacerlo por medio de un acuerdo escrito
separado, y sin limitar el párrafo anterior, su
licencia queda condicionada sobre el uso de la
Información según lo prescribe este acuerdo y
usted no podrá (a) usar esta Información con
ningún producto, sistema ni aplicación instalado
o de alguna otra manera conectado a o en
comunicación con los vehículos capaces de
navegar vehículos, posicionar, despachar, guiar
rutas en tiempo real, manejar flotas, o
aplicaciones similares; o (b) con o en
comunicación con, incluyendo de manera
enunciativa, pero no limitativa, teléfonos móviles,
computadoras palmtops o de mano, bíper o
localizador de personas, y asistentes personales
digitales o PDAs
Advertencia: La presente Información puede
contener Información imprecisa o incompleta
debido al paso del tiempo, cambio de
||
MAP AND SYSTEM INFORMATION
52
circunstanciaos fuentes utilizadas, y el hecho de
recopilar una gran cantidad de Información
geográfica, lo que puede tener como
consecuencias resultados incorrectos.
No existencia de garantía: Esta Información se le
proporciona en el estado en el que se encuentra
y usted acuerda utilizarla bajo su propio riesgo. Ni
HERE ni sus licenciantes (ni los licenciantes ni
proveedores de estos) otorgan ninguna garantía,
representación ni obligación de ninguna clase ni
declaración, expresa ni tácita, que surja de la ley
ni de cualquier otro tipo, incluyendo, sin
limitación, ninguna sobre contenido, calidad,
precisión, totalidad de Información, efectividad
confiabilidad, nivel en el que dicho sistema sea
adecuado para determinado fin, utilidad, uso o
resultados a obtenerse a partir de dicha
Información, ni de que la Información ni el
servidor no tendrán interrupciones ni estarán
libres de errores.
Exclusión de Garantía: HERE Y SUS
LICENCIANTES, (INCLUYENDO A LOS
LICENCIANTES Y PROVEEDORES DE ESTOS),
SE DESLINDAN DE TODA GARANTÍA,
EXPRESA O TÁCITA, RESPECTO DE LA
CALIDAD, DESEMPEÑO, COMERCIALIZACIÓN,
DE QUE EL SISTEMA SEA ADECUADO PARA
DETERMINADO FIN, E INCUMPLIMIENTO.
Algunos estados, territorios y países no permiten
ciertas exclusiones de garantía, por lo que en esa
medida, la exclusión anterior podrá no ser
aplicable a usted.
Exclusión de Responsabilidad: NI HERE NI SUS
LICENCIANTES (INCLUYENDO A LOS
LICENCIANTES Y PROVEEDORES DE ESTOS)
SERÁN RESPONSABLES FRENTE A USTED
RESPECTO DE NINGÚN HECHO QUE DÉ
LUGAR A NINGUNA RECLAMACIÓN,
DEMANDA NI ACCIÓN, INDEPENDIENTE-
MENTE DE LA NATURALEZA DE LA
RECLAMACIÓN, DEMANDA, ACCIÓN O
SUPUESTA PÉRDIDA O DAÑOS DIRECTOS O
INDIRECTOS, QUE RESULTEN DEL USO O
POSESIÓN DE ESTA INFORMACIÓN; NI POR
NINGUNA PÉRDIDA DE UTILIDADES,
INGRESOS, CONTRATOS NI AHORROS, NI
POR NINGÚN OTRO DAÑO DIRECTO O
INDIRECTO, CONSECUENCIAL, ESPECIAL O
INCIDENTAL QUE SURJA DEL USO QUE LE
DÉ, O DE SU INCAPACIDAD PARA UTILIZAR
ESTA INFORMACIÓN, CUALQUIER DEFECTO
EN ESTA INFORMACIÓN, NI EL INCUMPLI-
MIENTO DE LOS PRESENTES TÉRMINOS Y
CONDICIONES, YA SEA QUE SE ENCUENTREN
EN CONTRATO O EXTRACONTRACTUALES O
DE LOS TÉRMINOS DE ALGUNA GARANTÍA,
AUNQUE HERE Y SUS LICENCIANTES HAYAN
SIDO PREVENIDOS SOBRE LA POSIBILIDAD
DE LA EXISTENCIA DE DICHOS DAÑOS.
Algunos estados, territorios y países no permiten
ciertas exclusiones de responsabilidad, por lo que
en esa medida, la exclusión anterior podrá no ser
aplicable a usted.
Control de Exportaciones: Usted acuerda no
exportar de ningún otro lado ningún componente
de la Información, ni ningún producto directo de
la misma, salvo en cumplimiento de, y con todas
las licencias y aprobaciones que se requieran
bajo las leyes, reglas y regulaciones de
exportaciones administradas por la Oficina de
Control de Activos Extranjeros (Office of Foreign
Assets Control) del Departamento de Comercio
de EE.UU. y la Oficina de Industria y Seguridad
(Bureau of Industry and Security) del
Departamento de Comercio de EE.UU. En la
medida en que dichas leyes, reglas o
regulaciones de exportación le prohíban a HERE
cumplir con cualquiera de la las obligaciones de
entregar o distribuir la Información, dicha falla
será disculpada y no habrá de constituir
incumplimiento de este Contrato. Totalidad del
Acuerdo: Estos términos y condiciones
constituyen la totalidad del acuerdo entre HERE
(y sus licenciantes, incluyendo a los licenciantes y
proveedores de éstos) y usted, en relación con el
objeto del presente contrato, y prevalece en su
totalidad sobre cualquier acuerdo escrito u oral
anterior que exista entre nosotros con respecto
de dicho objeto.
Terminación: Usted y HERE acuerdan que si se
encuentra que cualquier porción de este contrato
es ilegal o no es ejecutable, dicha porción será
eliminada y el resto de este Acuerdo quedará en
plena vigencia y efecto.
MAP AND SYSTEM INFORMATION
53
Derecho Aplicable: Los términos y condiciones
mencionados anteriormente se regirán por las
leyes del Estado de Illinois (para Información para
las Américas y/o para la región Asia Pacífico) o
por las leyes de los Países Bajos – Holanda (para
la Información para Europa, Medio Oriente y/o
África), sin dar efecto al (i) conflicto con otras
leyes, o (ii) los Contratos de Compraventa de
Bienes Internacionales por la Convención de las
Naciones Unidas, misma que se excluye
explícitamente. Para cualquier disputa,
reclamación ó acción derivadas de ó en relación
con los Datos (“Reclamación”), usted acepta
someterse a la jurisdicción personal de (a) el
Estado de Illinois para Reclamaciones
relacionadas a los Datos para las Américas y/o
para la región Asia Pacífico proporcionada
mediante el presente documento, y (b) a la de los
Países Bajos – Holanda para los Datos de
Europa, Medio Oriente y/o África proporcionada
mediante el presente documento. Usuarios
Finales Gubernamentales: En caso de que la
Información sea adquirida por, o en
representación del gobierno de Estados Unidos o
cualquier otra entidad buscando o solicitando
tener derechos similares a aquellos usualmente
reclamados por el gobierno de Estados Unidos,
esta Información es un "objeto comercial” según
se define dicho término en 48 C.F.R. (“FAR”)
2.101, se licencia de conformidad con el
presente Contrato de Licencia de Usuario Final, y
cada copia de la Información entregada o
proporcionada de cualquier otra forma deberá
estar marcada en la forma pertinente con la
siguiente leyenda “Aviso de Uso” y ser tratada de
conformidad con dicho Aviso.
AVISO DE USO NOMBRE DEL CONTRATISTA
(PRODUCTOR O PROVEEDOR) HERE
DIRECCIÓN DEL CONTRATISTA (PRODUCTOR
O PROVEEDOR) 425 West Randolph Street,
Chicago, IL 60606. La presente Información es
un objeto comercial, tal y como se define en FAR
2.101, y está sujeta al Contrato de Licencia de
Usuario Final en términos del cual fue
proporcionada esta Información. © 1987 - 2013
HERE. Derechos reservados. En caso de que el
Funcionario Contratante, dependencia del
Gobierno Federal, o cualquier otro funcionario
público federal se niegue a utilizar la leyenda que
se establece en el presente, dicho funcionario
contratante, dependencia del Gobierno Federal o
funcionario público deberá notificar a HERE
antes de buscar derechos adicionales o
alternativos respecto de la Información. © 1987 -
2013 HERE. Derechos reservados
Related information
•
Sensus Navigation (p. 7)
•
Navigation – map and system information
(p. 42)
INDEX
55
C
Compass 29
D
Destination
setting 18
I
Itinerary 23
K
Keypad 13
L
License agreement 48
M
Map
options 29
screens 29
Menus
Scroll menu 11
N
Navigation 42
guidance options 31
importing/exporting a stored location 34
menu overview 43
Real Time Traffic Information (RTTI) 39
route options 27
traffic information 36, 39
troubleshooting 46
P
Points of interest (POI) 22
R
Route
alternative routes and route overview 24
S
Setting a destination 18
T
Text wheel 13
Traffic information 39
U
USB connector (audio system) 7
V
Voice control 14
Volvo Navigation System
general information 7
INDEX
INDEX
56
TP 24468 (English - USA & Canada), AT 1717, MY18, Copyright © 2000-2017 Volvo Car Corporation
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
Volvo 2019 Early Manual de usuario
- Categoría
- Navegantes
- Tipo
- Manual de usuario
- Este manual también es adecuado para
en otros idiomas
- English: Volvo 2019 Early User manual
Artículos relacionados
Otros documentos
-
Dell NAV3000 Manual de usuario
-
Clarion NAX963HD El manual del propietario
-
Sony NVX-P1 El manual del propietario
-
-
Audiovox GPS Receiver NPC5400 Manual de usuario
-
-
Clarion NP400 Manual de usuario
-
Sony NV-U70 Manual de usuario
-
-
Magellan SporTrak SporTrak Color User Manual Addendum